64 bit processor

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - DMA driver Hi, I am sort of a newbie to DMA. But now i am supposes to make a DMA driver, basically a driver which will talking to the DMA controler on my board. For this I have few questions 1) What is burst size and how is it related to DMA 2) Would making the DMA driver similiar to a stream interface driver be a correct design? 3) Do I need to modify the API's HalTranslateSystemAddress or HalAllocateCommonBuffer etc for the same 4) What is the difference between a DMA driver and a DMA adapter? Thanks Anwar Tag: 64 bit processor Tag: 102562
  - 2
    - How to set up multiple ip addresses on a single network adaptor? Hi, all? I'm finding a way to set up multiple ip addresses on a single ethernet card? How can I build it? Any pointers to related material would be also appreciated. Tag: 64 bit processor Tag: 102559
  - 3
    - How to set default cluster size of nand flash at flash memory form Hi, all? I wanna know if there is any way to change the default filesystem or cluster size value when formating nand flash with 'control panel --> storage manager'. Tag: 64 bit processor Tag: 102558
  - 4
    - WPA2, AES PB 5.0 Our WLAN driver supports WPA2. We have configured our access point to support WPA2, AES. When I connect with my laptop with WPA/AES type, it is getting connected after I provide USERNAME/PASSWORD/DOMAIN But If I choose the same configuration/credentials in my WINCE device - WPA2/AES/PEAP, popup comes asking for username and password. Even if I give the details correctly, popup keeps coming up asking for the credentials. After few tries it says cancelled authentication. 1) Does this combination is supported in PB5.0 - WPA2/AES ? Following are the settings we were asked to setup by the people who configured AP. The Radius details are as follows: a. Data encryption - AES b. EAP type - PEAP c. No Certificate validation required d. Authentication method - secured password (EAP-MSCHAP.V2) 2) I was able to do the the first three settings(a, b and c) in my wnce device. I assume PEAP authentication always follows EAP-MSCHAP.V2 method. Is that correct ? Tag: 64 bit processor Tag: 102557
  - 5
    - Surprise Remove to the USB Audio driver Dear Experts, I'm developing USB audio driver for the WindowsCE5.0. Until now, everything is good execept handling surprise remove USB audio device. The problem is i'm playing music via Media player and surprising remove device without stop music first. Then system generates error message "SwMixer:WaitForBuffer failed. Audio driver missed interrupt?". For the bug, i've done experiments: 1. When get error from lpIssueIsochTransfer(), i process the data i've received at first then return "MMSYSERR_ERROR" to OS in the WODM_WRITE request. 2. Besides 1. i also unload our device. // via DeactiveDevice(pUSBWave->hStreamDevice). Both of the cases system returns the same error:"SwMixer:WaitForBuffer failed. Audio driver missed interrupt?". I wonder is it SwMixer cannot support surprise remove or driver has to do more? Sincerely, Hsiang Hua, Chao C-Media Inc. Tag: 64 bit processor Tag: 102556
  - 6
    - What is RTH.exe in the NK.bin? Hi All, I tried to find information with regards to RTH.exe which is part of the NK.bin image. Pardon my ignorance, can some one please tell me what does RTH.exe do? What is it consist of (what dlls being used) and whether is it possible to exclude it usage. Sincerely Jimmy Tag: 64 bit processor Tag: 102555
  - 7
    - Registry settings for RAS server Hi, I'm struggling with the RAS server application for an ARMV4I board with wince 5.0 for quite a while.. The server seems to start-up well - I did not change any of the settings. At first, I tried adding a line with the device name of "Serial Cable on Com Port:", since this is the "friendly name" of the unimodem I had in HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Serial\Unimodem. when using the LineConfig function, I received an error - 659 (device not found). I saw that when looking for the adopter, the device name and type that mine was compared to is "Hayes Compatible on COM1:" with "modem" type, so I changed my device name and type, which seemed to work, since all the result values were successful (though I did not see any GUI to change the settings). I added this to my project.reg as well: [HKEY_LOCAL_MACHINE\Comm\ppp\Server\Line\"Hayes Compatible on COM1:"\] "Enable"=dword:1 "DeviceType"="modem" "Flags"=dword:2 I created a new connection on my PC (win-XP, which is connected with the serial port to the board) as a guest, directly to another computer, with the maximum speed of 119200 KB, Hardware control disabled. When I tried to connect (after starting the RAS server), I received the following error message: Error 777: The connection attempt failed because the modem (or other connecting device) on the remote computer is out of order. which is the same error received when the board is disconnected. The serial port surely works, since I can use the hyper terminal to control it. Any help will be most welcome.. ~Y. Tag: 64 bit processor Tag: 102550
  - 8
    - sqlmobile and server 2000 question I'm using the RDA - Pull method to download data from my SQL Server 2000 database to my WINCE5.0. I have this working fine in my environment, but when I try to run it on a clients network I am getting an error. Error Code: 80070005 Message : Minor Err.: 0 Source : Microsoft SQL Server 2005 Mobile Edition" When I browse out to the SSCESA30.DLL file from IE Explorer, I do get "Microsoft SQL Server Compact Edition Server Agent" returned, but only if I enter the domain (along with UID & PWD) when prompted from the explorer session. Do I need the domain somewhere in the connection string of my program? All I have in it now are the URL Login & URL Pwd. If I do, can anyone give me an example of how I would add it to my vs2005 code. Thanks. This is my code: Private Sub pull() Dim strLocalConnect As String Dim strRemoteConnect As String strRemoteConnect = "Provider=SQLOLEDB;Data Source=LF- WINXP;User ID=sa;Password=jianwei;Initial Catalog=SPMS2005" strLocalConnect = "Data Source=" + DatabaseName Try Dim rda As SqlCeRemoteDataAccess = New SqlCeRemoteDataAccess() Dim strSelectTablerToD As String strSelectTablerToD = "SELECT * FROM dbo.issue" rda.InternetLogin = "" rda.InternetPassword = "" rda.InternetUrl = strInternetURL rda.LocalConnectionString = strLocalConnect rda.Pull("xx", strSelectTablerToD, strRemoteConnect, _ System.Data.SqlServerCe.RdaTrackOption.TrackingOff) Catch ex As SqlCeException ShowErrors(ex) End Try End Sub Tag: 64 bit processor Tag: 102548
  - 9
    - sqlmobile and server 2000 question I'm using the RDA - Pull method to download data from my SQL Server 2000 database to my WINCE5.0. I have this working fine in my environment, but when I try to run it on a clients network I am getting an error. Error Code: 80070005 Message : Minor Err.: 0 Source : Microsoft SQL Server 2005 Mobile Edition" When I browse out to the SSCESA30.DLL file from IE Explorer, I do get "Microsoft SQL Server Compact Edition Server Agent" returned, but only if I enter the domain (along with UID & PWD) when prompted from the explorer session. Do I need the domain somewhere in the connection string of my program? All I have in it now are the URL Login & URL Pwd. If I do, can anyone give me an example of how I would add it to my vs2005 code. Thanks. This is my code: Private Sub pull() Dim strLocalConnect As String Dim strRemoteConnect As String strRemoteConnect = "Provider=SQLOLEDB;Data Source=LF- WINXP;User ID=sa;Password=jianwei;Initial Catalog=SPMS2005" strLocalConnect = "Data Source=" + DatabaseName Try Dim rda As SqlCeRemoteDataAccess = New SqlCeRemoteDataAccess() Dim strSelectTablerToD As String strSelectTablerToD = "SELECT * FROM dbo.issue" rda.InternetLogin = "" rda.InternetPassword = "" rda.InternetUrl = strInternetURL rda.LocalConnectionString = strLocalConnect rda.Pull("xx", strSelectTablerToD, strRemoteConnect, _ System.Data.SqlServerCe.RdaTrackOption.TrackingOff) Catch ex As SqlCeException ShowErrors(ex) End Try End Sub Tag: 64 bit processor Tag: 102547
  - 10
    - Basic question with TCP and serial port If I build an image that DOES NOT have an Ethernet connection but does have your basic serial ports. And I include things like a RAS server and/or FTP server, How can I set an I/P address? I know how to set the TCP/IP address parameters for an Ethernet device but not for a serial device. Tag: 64 bit processor Tag: 102546
  - 11
    - My top wish for CE6 SP next Fix all the CE 5 and CE 6 side by side install issues and make all the different versions of the remote tools (VS2005,PB5 and PB6) play nicely together. Tag: 64 bit processor Tag: 102545
  - 12
    - NK.bin for SMDK2410 not built Hello, I want to build WinCE 4.2 for an Acer N30. Build returns without errors, Make Image runs fine, too. But it produces only chain/core/DRIVERS/EBOOT/xip.bin. You find the output below. postromimage.bat only demands the NK.bin, which it can't find. Building for Emulator x86 outputs a single NK.bin, it run's fine. To flash the SMDK2410 image to the device I need a NK.BIN as available from Acer for updating the device. What do I need to get one .bin instead of five? Please can you hint what I should look out for? Best Regards, Sasha ---- Make Image ... Writing C:\Programme\WINCE420\PUBLIC\mySmallSamsung\RelDir \EMULAT~2\NK.bin Table of contents 812e4050 0000161c ( 5660) Writing ROM signature and TOC pointer at 80240040 Kernel data copy section 8086af74 00000020 ( 32) ROM Header 812e3ffc 00000054 ( 84) First DLL code Address: 02de0000 Last DLL code Address: 04000000 First DLL Address: 01ec01ec Last DLL Address: 02000000 Physical Start Address: 80240000 Physical End Address: 812e566c Start RAM: 812e6000 Start of free RAM: 81325000 End of RAM: 81c00000 Number of Modules: 120 Number of Copy Sections: 2 Copy Section Offset: 8086af74 FileSys 4K Chunks/Mbyte: 128 <2Mbyte 128 2-4Mbyte 0 4-6Mbyte 0 >6Mbyte CPU Type: 014ch Extensions Pointer: 80245a80 Total ROM size: 010a566c ( 17454700) Starting ip: 802ab798 Raw files size: 000d3ddd Compressed files size: 0008099d Compacting bin file... Done! makeimg: Check for C:\Programme\WINCE420\PUBLIC\mySmallSamsung\RelDir \EMULAT~2\PostRomImage.bat to run. Tag: 64 bit processor Tag: 102543
  - 13
    - Windows CE HOT Key Hi, In the windows ce devices hard keys like answer and hangup keys performs only when phone is active. I have question that which part or the driver of the system comes to know that phone is active ( Typically it is when Internal speaker is set) and now allow these keys to perform. If we find any module then what is the way to communicate with that using application level programming ? I am expecting I'll defiantly get the answer. Thanks, Niraj Tag: 64 bit processor Tag: 102542
  - 14
    - Duplicated NAND folder after using Hive-Based Regsitry Hi Everyone, I have an evaluation board which originally sets to use RAM-Based Regsitry. This board uses one 128MB NAND flash and there is no IPSM. Therefore changes to Registry will lose after a power cycle. I changed RAM_Based Registry to HIve_Based Registry and modified the common.reg as the following: [HKEY_LOCAL_MACHINE\init\BootVars] "SystemHive"="NAND Flash\\system.hv" "ProfileDir"="NAND Flash" "Flags"=dword:1 "RegistryFlags"=dword:1 "Start DevMgr"=dword:1 "DefaultUser"="User" I rebuilt the OS and the device had no problem launching the OS. But I found in addition to "NAND Flash" folder, there is another folder called "NAND Flash2" and contents in there two folders are the same. Is it because that I want to store system.hv in NAND Flash folder? Why could that happen and how to fix it? Thanks, James Tag: 64 bit processor Tag: 102534
  - 15
    - wince 6.0 Exception in gwes hangs kernel on startup Hello, Am attempting to port a 5.0 device to 6.0 and have ran into an exception I can't find the cause of. The error message given is: Exception 'Data Abort' (4): Thread-Id=03b60002(pth=87df4aec), Proc-Id=00400002(pprc=80153308) 'NK.EXE', VM-active=00400002(pprc=80153308) 'NK.EXE' PC=c0190620(gwes.dll+0x00050620) RA=c0190608(gwes.dll+0x00050608) SP=d06cfddc, BVA=00000104 And from gwes.map I see the return address 0x00050608 falls between MaskBlt_I and StretchBlt_I in blt2.obj. MaskBlt_I is not referenced in the Platform code, and for an experiment I built the device with no display, but received the same error (???) Any clues where to investigate the possible cause? Thanks in advance for any input. Tag: 64 bit processor Tag: 102533
  - 16
    - NDIS crash when Hi, I have a problem with NDIS crashing sometimes when I suspend my system (Samsung S3C2410 CE5.0). It happens maybe after an hour if I sleep/ resume in 15 s intervall. The image has a driver cs8900.dll for a cs8900 ethernet chip. Also, a GPRS modem is present. If I remove the cs8900 driver the crash doesn't happen. The crash happens just after I set the cs8900 chip in HW Suspend before suspend. This is done thru OID_PNP_CAPABILITIES IOCTLs. This is how the debug output looks: CS8900:: OID_PNP_SET_POWER to [NdisDeviceStateD3] CS8900SetNdisDeviceStateD3 Data Abort: Thread=85ea3c00 Proc=8c226400 'device.exe' AKY=ffffffff PC=03b645e4(ndis.dll+0x000045e4) RA=3b743b74(device.exe +0x01733b74) BVA=3b743bc8 FSR=00000005 OEMIoControl: Unsupported Code 0x10100f4 - device 0x0101 func 61 Data Abort: Thread=85eacd94 Proc=8c226400 'device.exe' AKY=00000005 PC=03ad44d8(tcpstk.dll+0x000144d8) RA=03ad44a4(tcpstk.dll +0x000144a4) BVA=3b743b7e FSR=00000005 After this the system sleeps, then it can wake up on interrupt or RTC alarm. But then it crashes immediately. I've tracked (ndis.dll +0x000045e4) to function NdisInterlockedAddUlong by looking in ndis.map. Any ideas? Next step is to use debug version of ndis.dll Regards, Jojje Tag: 64 bit processor Tag: 102526
  - 17
    - storagemanager registry setting... hi, all? I'm finding some registry value that set default filesystem format(fat16 or fat32) when user run the format operation from 'control panel --> storage manager' By default, the storage manager seems to format the nand flash by fat32. How can I change the default setting to fat16. Isn't there any registry settings for it? Tag: 64 bit processor Tag: 102525
  - 18
    - 802.1x implementation over LAN hi all, It's a general question regarding 802.1x over LAN. My question is - can we write device driver to implement 802.1x in wince 5.0? if it is possible, where it can be implemented in a ndis device driver stack(i mean can this is implemented at NDIS miniport driver level?). thanq all. Tag: 64 bit processor Tag: 102519
  - 19
    - Daylight saving time problem with PB5.0 Hi everybody, With PB 5.0 on a PhyCore PXA-270 (BSP from Adeneo), I try to put on Daylight Saving Time ('Paris' time zone). I have installed all the QFE for Wince 5.0 and added the 'SNTP Client with DST' component to my image. In my 'Project.reg file, I've added : [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Clock] "AutoDST"=dword:00000001 "ShowDSTUI"=dword:00000001 In the 'Paris' time zone, on sunday October 28th, 2007, when the hour will pass of 2:59AM to 3:00AM, then the hour must be adjusted to 2:00AM... This is my procedure to test Daylight Saving Time mechanism : - With 'Date/Time Properties', I set the RTC to sunday October 21th, 2007 2:00AM (one week before date/time transition) and I validate. - With 'Date/Time Properties', I set the RTC to sunday October 28th, 2007 2:55AM (5 minutes before the time transition) and I validate. - I wait 10 minutes, but nothing happen and the time continue to be normally incremented. - After this time (eg 3:05AM), if I go again in the 'Date/Time Properties' and I validate without changing anything, WinCE 'see' the time transition and set the time to 2:05AM with displaying a dialog box that inform me that the time has been changed automatically. By trying to resolve this problem, I found something curious : when I sysgen (with "clean before building" option), I see a warning about "tsvc_dst" : makeimg: Warning Localization FAILED: Could not find C:\WINCE500\PBWorkspaces\PhytecDevelBoard_DEMO\RelDir\phyCore-PXA270-DK_ARMV4I_Debug\tsvc_dst.DLL|EXE|CPL I have installed PB5.0, cleaned the folders, installed PB5.0 and all QFE's (up to 05-2007) but I have always this warning and the Daylight Saving Time don't work automatically. Can someone help me ? -- oVo olivier vigliengo tma fr . @ . Tag: 64 bit processor Tag: 102510
  - 20
    - Hive VS RAM -Based Registry What's the difference between Hive-Based Registry and RAM Based Registry? (And what about hard reset with each one of them?) Mhaxx Tag: 64 bit processor Tag: 102508
  - 21
    - What does this error message mean? USB Bulk-in operation. Unknown: DEBUGCHK failed in file E:\WINCE500\PUBLIC\COMMON\OAK\DRIVERS\USB\HCD\USB20\EHCI\.\ctd.cpp at line 282 DWORD CQTD::IssueTransfer(DWORD dwPID, BOOL bToggle1, DWORD dwTransLength, PPhysBufferArray pPhysBufferArray,BOOL bIoc) { CheckStructure (); if ( pPhysBufferArray ==NULL ) { ASSERT(FALSE); return 0; } ASSERT((pPhysBufferArray->dwBlockSize== dwTransLength + (pPhysBufferArray ->dwStartOffset & EHCI_PAGE_OFFSET_MASK)) || pPhysBufferArray->dwBlockSize == EHCI_PAGE_SIZE); DWORD dwMaxPacketSize = (m_pTrans->m_pCPipe->GetEndptDescriptor()).wMaxPacketSize & 0x7ff; DWORD dwMaxPacketNumber=(EHCI_PAGE_SIZE* MAX_QTD_PAGE_SIZE)/dwMaxPacketSize; DWORD dwTotalTransfer=min(dwTransLength,dwMaxPacketNumber*dwMaxPacketSize); DWORD dwTotalPage = (pPhysBufferArray ->dwStartOffset + dwTransLength + EHCI_PAGE_SIZE -1)/EHCI_PAGE_SIZE; ASSERT(dwTotalPage<MAX_QTD_PAGE_SIZE+1); // <============== for (DWORD dwIndex=0;dwIndex<dwTotalPage && dwIndex<MAX_QTD_PAGE_SIZE+1;dwIndex++) { qTD_BufferPointer[dwIndex].dwQTD_BufferPointer = (pPhysBufferArray ->dwArrayBlockAddr[dwIndex] & EHCI_PAGE_ADDR_MASK); } qTD_BufferPointer[0].qTD_BPContext.CurrentOffset = pPhysBufferArray ->dwStartOffset & EHCI_PAGE_OFFSET_MASK; qTD_Token.qTD_TContext.PID = (dwPID== TD_OUT_PID ?0:(dwPID==TD_SETUP_PID?2:1)); qTD_Token.qTD_TContext.C_Page= 0; qTD_Token.qTD_TContext.IOC=((dwTotalTransfer < dwTransLength)?0:(bIoc?1:0)); qTD_Token.qTD_TContext.BytesToTransfer=dwTotalTransfer; qTD_Token.qTD_TContext.DataToggle=(bToggle1?1:0); qTD_Token.qTD_TContext.Active = 1; return dwTotalTransfer; } Tag: 64 bit processor Tag: 102499
  - 22
    - Dial up connection user name password in registry In CE 4.2 ,I was able to save the user name and password for dial up connection in the registry without any problem. But in 5.0 ,though the user name and password are retained in the system,I am not able to find appropriate registry where the user name and password are stored,so that I will be able to include them in the OS. Can someone let me know where the user name and password are stored. Thanks Tag: 64 bit processor Tag: 102495
  - 23
    - Limitations of cmd.exe on CE Hi, It seems like the command processor cmd.exe on CE(4.2) is a heavily reduced version of the "cmd.exe we know". It looks like quite a few commands are not supported in it. For example 'for", "find", "more", etc... are not available. The "for" instruction is quite handy to have, actually I should say it's really a pain in the axx to not have it. I wonder if there is a way to add support for these commands and have a full featured command prompt, suitable to run some batch files, or is it hopeless and I should forget about running a non trivial .bat script on CE. Any experience in that domain? Thanks. Alex Tag: 64 bit processor Tag: 102492
  - 24
    - GetGeneralIFConfig Error Our platform is a PXA255 WinCE 4.2 with a 802.11g CF Radio Module. Upon inserting the WIFI adapter GetGeneralIFConfig errors are reported by our debug build of CE 4.2. OpenIFConfig(Comm\SDCF10G1\Params\TCPIP *Handle 0x83FE4C4, BOOL Ret: 1) +GetGeneralIFConfig(ConfigInfo 0x83FE4C98 Handle 0xA2730) GetGeneralIFConfig:Unable to read DefaultGateway value! GetGeneralIFConfig:Unable to read DNS value! GetGeneralIFConfig:Unable to read WINS value! GetGeneralIFConfig:Unable to read UseZeroBroadcast value! All-nets boadcasts will be addressed to 255.255.255.255 What causes this type of error? Thanks. Tag: 64 bit processor Tag: 102491
  - 25
    - Why is the CE6 build process so slow ? While doing a build, my machine gets stuck at NETCFV2_MODULES= dotnetv2 for 5 or 10 minutes. How can I speed up this build time ? Tag: 64 bit processor Tag: 102488
- Next
  - 1
    - Localisation of TIMESRV (tsrv_dst warning) CE 5.0 <<<<Apologies if you have already seen this and responded to this on "microsoft.public.win32.programmer.wince", I posted it to the wrong group (!!!!) so am reposting here.>>>> The only warning I have left on my platform build is as follows: makeimg: Warning Localization FAILED: Could not find C:\WINCE500\ ... \tsvc_dst.DLL|EXE|CPL This appears to be because the module "timesrv.dll" which handles daylight saving time builds in a static library tsvc_dst.lib which includes a localisable string table "tsvc_dst.res". So, the file that should be being localised is "timesrv.dll" and all the localising string tables are called "tsvc_dst.res". The makefile in CESYSGEN is adding "tsvc_dst" to "servers.loc" so that when makeimg comes across this file, it can't find an executable an executable with that name, ergo the warning. So.... 1. I am assuming that "timesrv.dll" has not been localised correctly. (Not too much of a problem for me, but I'm sure not the best situation if you're German, Spanish, Italian, etc....) 2. I am also assuming that I could patch my release directory copy of "servers.loc" in "PreMakeImage.bat" with something that fixes this problem. But what is this? How do I get to localise "timesrv.dll" using the resources for "tsvc_dst.dll" ???? Anyone that's got this far down such a complicated (& admittedly boring) post deserves a prize!!!! If you can give me the answer, I might even send you one!!!! Thanks in advance, Andrew. Tag: 64 bit processor Tag: 102486
  - 2
    - Unicode Script Processor Hello Everybody, Has anyone tried adding indic or complex script support to wince 5.0. How is the performance? I have observed that the indic support with Mangal font based UI works considerably slow, has anyone observed otherwise. Also, I have observed that the months(in Marathi indic language) in the system calender paint as fast as its US English counterpart however it paints slowly from a DOTNET and MFC application. Is it a issue related to Complex script if yes is there any alternative solution??? In anticipation of a reply ASAP Regards, Ann Tag: 64 bit processor Tag: 102479
  - 3
    - installable Interrupt I actually have my installable interrupt routine working but I was hoping someone could explain some things about it to me? I see how the "instance" gets created, I call LoadIntChainHandler then I setup ISR_INFO... and pass it via KernelLibIoControl now KernalLibIoControl calls the IoControl routine inside my in dll, with an "instance" my dll also has a routine called CreateInstance How does CreateInstance get called ? how does the kernal know how many "instances have been created? my assumption is that the call to LoadIntChain.. calls CreateInstance and keeps track of the number of instances but I cant prove this... then when an interrupt occurs, the kernal calls my isrHandler once for each "instance" created during loadInt call until it gets a return value other then SYSINTR_CHAIN ?, Now I have and interrupt service thread routine that is waiting on an event, how does this get event get created ? Just want to make sure I understand how this really works... Thanks, Joe Welfeld Tag: 64 bit processor Tag: 102477
  - 4
    - CEPC Does not recognize Hard Drive Hi, I have installed WinCE 5.0 & Platform Builder on a Windows XP desktop computer, having these characteristics: - CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz - RAM: 512 MB - Hard Disk: 20 GB My CEPC has the following configuration: Processor : AMD Inc., i486 Mother Board : RS482M4 Chip set : ATI =AE SB450 Hard Drive : 20GB, Western Digital WD200BB-75AUA1 PC Model : Wipro Super Genius These are the steps I made: - I followed the procedure mentioned in the Platform Help "How to Configure Hard Disk Drives on a CEPC" and added FAT file system / storage device/wordpad to the OS design and built the OS image nk.bin. - I booted another machine(CEPC) from the floppy which has the boot sequence - I attached the Windows XP desktop computer to the CEPC through Ethernet & loaded the nk.bin to CEPC Wince runs correctly on CEPC but I have some problems: 1) The hard disk drive is not recognized, even if in the OS design I have inserted all the needful drivers and applications, as explained in the Platform Help (section "How to Configure Hard Disk Drives on a CEPC"). 2) The computer BIOS recognises hard drive. 3) Do the drivers of ATI =AE SB450 support WINCE? Can someone please give me some advice or some useful link? Thanks in advance. ---------------------------------------------------------------------------= ----- Bhavani Tag: 64 bit processor Tag: 102468
  - 5
    - Wince4.2 + S3C2440 USB device and activeSync with NOTIFICATION_EVENT_RS232_DETECTED CPU:S3C2440 Debut COM:com2 application COM:com1 I had added the USB function and serial driver. after cold start/reset , system works okay and when I pluged the USB device , ActiveSync could connected and works well, but after I run my com port testting application( the COM1 will continuely receiving the extral data), the debug port outputting the many information like below: -------------------- Event occurred : NOTIFICATION_EVENT_RS232_DETECTED SL_ModemIntr - pHWHead->OpenCount 0 !pHWHead->OpenCount : 0x0 IsAPIReady(SH_WMGR) == true Indicating RS232 Cable Event Event occurred : NOTIFICATION_EVENT_RS232_DETECTED SL_ModemIntr - pHWHead->OpenCount 0 !pHWHead->OpenCount : 0x0 IsAPIReady(SH_WMGR) == true Indicating RS232 Cable Event Event occurred : NOTIFICATION_EVENT_RS232_DETECTED SL_ModemIntr - pHWHead->OpenCount 0 !pHWHead->OpenCount : 0x0 IsAPIReady(SH_WMGR) == true Indicating RS232 Cable Event Event occurred : NOTIFICATION_EVENT_RS232_DETECTED SL_ModemIntr - pHWHead->OpenCount 0 !pHWHead->OpenCount : 0x0 IsAPIReady(SH_WMGR) == true Indicating RS232 Cable Event Event occurred : NOTIFICATION_EVENT_RS232_DETECTED SL_ModemIntr - pHWHead->OpenCount 0 !pHWHead->OpenCount : 0x0 IsAPIReady(SH_WMGR) == true Indicating RS232 Cable Event Event occurred : NOTIFICATION_EVENT_RS232_DETECTED SL_ModemIntr - pHWHead->OpenCount 0 !pHWHead->OpenCount : 0x0 IsAPIReady(SH_WMGR) == true Indicating RS232 Cable Event Event occurred : NOTIFICATION_EVENT_RS232_DETECTED ..... ---------------------------------------------------- I checked some register settings and serial driver code , could not found any error. Tag: 64 bit processor Tag: 102462
  - 6
    - SD card I/O Hi All, I have WinCe 5.0 on S3C2440A platform .I am working on a navigation device and my application ,data is stored in a SD card.Iam facing problems with suspend and resume.My application is freezed for few seconds after resuming form suspend state.I read many discussions regarding this issue in groups.I have tried to set the values for "PNPUnloadDelay" and "PNPWaitIODelay".After this chnages my device is not waking up from suspend itself.Anybody please suggest some solution to resolve this issue. Thanks in advance. Sam Tag: 64 bit processor Tag: 102461
  - 7
    - X86 emulator : ping not happening Hi, I've built the x86 emulator internet appliance platform.The network driver "dc21x4.dll" will be loaded but I'm not able to ping from emulator to my desktop pc or to the default gateway.It gives "transmit failed:error 11010. ipconfig command is showing the IP address. I've disabled DHCP & assigned static IP address with default gateway being same as that of my desktop pc.I modified platform.reg as follows: [HKEY_LOCAL_MACHINE\Comm\DC211401\Parms\TcpIp] ; @CESYSGEN IF CE_MODULES_DHCP "EnableDHCP"=dword:0 ; This should be MULTI_SZ "DefaultGateway"="192.xxx.y.1" ; Use zero for broadcast address? (or 255.255.255.255) "UseZeroBroadcast"=dword:0 ; This should be MULTI_SZ, the IP address list "IpAddress"="192.xxx.y.abc" ; This should be MULTI_SZ, the subnet masks for the above IP addresses "Subnetmask"="255.255.255.0" ; @CESYSGEN ENDIF CE_MODULES_DHCP ENDIF BSP_NOETHER ! ; @CESYSGEN ENDIF CE_MODULES_NDIS In spite of this, the network is not working(ping fails with error code 11010).But IP address 192.xxx.y.abc is shown with ipconfig command. Please suggest me what shall i do? Tag: 64 bit processor Tag: 102457
  - 8
    - as for debugging mode. hello, everyone? I'm trying to use break point with some bsp under the following condition. - build option : SYSGEN_SHELL=1, IMGEBOOT=1, IMGCELOGENABLE=1, no IMGNODEBUGGER=1, no IMGNODEBGGER=1, no IMGNOKITL=1, IMGPROFILER=1. ( I checked the uppper 6 options at build option window and also add 'platform manager' catalog to my project. - build mode : Release mode Although there is no wrong with settings, the bsp can't use break point at PB. Is there any job to support the break point? Currently, the break point can be made but it can't be stopped at the break point. Tag: 64 bit processor Tag: 102455
  - 9
    - WinCE50, USB Function: Mass Storage Problem ? Dear all: I try to export the SDMMC directory of the embedded device to the WinXP, like USB MASS STORAGE. I do the following operations: Step1: On WinXP, rename the default folder name from "Removable Disk" to "DeviceStorage". Step2: Plug out the SD card, but the WinXP's Explorer still shows "DeviceStorage", not "Removable Disk". I press the F5 key and the WinXP's Explorer shows the correct text"Removable Disk". The problem is caused by WinXP's bug or the USBFN code which fixed by me has some bugs?? SCSI command? Please give me some help, thank first. Tag: 64 bit processor Tag: 102453
  - 10
    - MP3 player Could someone tell if it's simple or hard to develop an MP3 player by your own? Mhaxx Tag: 64 bit processor Tag: 102449
  - 11
    - MSG_DONTROUTE in socket send/sendto Dear all, It would appear that Windows CE 5.0 is ignoring the MSG_DONTROUTE flag in "send" and sendTo" over a WLAN connection (don't know if this is relevent or not). The help is not clear as to whether this is supported or not: "MSG_DONTROUTE Specifies that the data should not be subject to routing. A Windows Sockets service provider can choose to ignore this flag." Does anyone know the definitive answer? Thanks, Andrew. Tag: 64 bit processor Tag: 102447
  - 12
    - Undefined instruction exception. WLAN I'm getting the followng undefined insruction exception. Undefined Instruction: Thread=83c4b000 Proc=81566320 'device.exe' AKY=00000005 PC=01be0590(wlan.dll+0x00050590) RA=01bd2760(wlan.dll +0x00042760) BVA=09ffed04 FSR=000000f5 When I referred the WLAN.map file I dont see any 0x00050590(wlan.dll +0x00050590) address at all. All addresses are like 0001:000012dc(4 digits). I checked the RA=01bd2760(wlan.dll+0x00042760). I searched the map file for address 0x00042760. I'm able to find 00142760. The preferred load address is given as 0x00100000. So I thought I was able to get to 42760 in map file. But as you see below no function name is seen but some wild junk characters. 0003:00003760 ??_C@_1CC@ILOB@?$AAW?$AAR?$AAO?$AAN?$AAG?$AAS? $AAS?$AAI?$AAD?$AAL?$AAe?$AAn?$AA?3?$AA?$CF?$AAd?$AA?6?$AA?$AA@ 00142760 NdisMiniportHandlers.obj In this case, how will find out which function is causing the exception or which instruction has caused the exception. Thanks a ton n advance. Help me out guys. Tag: 64 bit processor Tag: 102443
  - 13
    - Cannot mount 80GB HardDisk. Dear all, Does the CE 5.0 support IDE 80G HardDisk in Secondary IDE ? I think it should be mounted to "Hard Disk" folder. Even I can't see it but there are something strange that I can see "DSK2:" in the Storage Manager. And "No paritions" ?? why? Tag: 64 bit processor Tag: 102441
  - 14
    - Exception in coredll when WLAN tried reconnecting PB 5.0, PXA270, XSCALE I got an exception when WLAN module tried reconnecting to the AP. I'm not sure why I got that exception. After this I had to power of and power on the system to make the WLAN module work again. Is it possible to find why I got this exception ? I have attached the debug output below. Enabling filtering... PHGHHAL_EVNT_DISCONNECTPHGHHAL_EVNT_DISCONNECTPHGHHAL_EVNT_DISCONNECT: Attempting reconnectionPHGHHAL_EVNT_DISCONNECT: HostDrvHandleLossOfConnectionConnection lost: indicated to NDISOID_802_3_MULTICAST_LIST: Len:24 [0]:33[1]:33[2]:0[3]:0[4]:0[5]:1[6]:33[7]:33[8]:0[9]:0[10]:0[11]:c[12]: 33[13]:33[14]:ff[15]:26[16]:1e[17]:19[18]:1[19]:0[20]:5e[21]: 7f[22]:ff[23]:fa Sending the addr list to target... Enabling filtering... OID_802_3_MULTICAST_LIST: Len:18 [0]:33[1]:33[2]:0[3]:0[4]:0[5]:1[6]:33[7]:33[8]:0[9]:0[10]:0[11]:c[12]: 33[13]:33[14]:ff[15]:26[16]:1e[17]:19 Sending the addr list to target... Enabling filtering... OID_802_11_SSIDRSSI=-200 RSSI=-200 RSSI=-200 ZCF:: LogEvent new list selected.. Close current EAPOL session for [].. OID_802_11_SSIDOID_802_11_SSID timeoutConnection lost: indicated to NDISHostDrvConnectToSSID return failOID_802_3_MULTICAST_LIST: Len:12 [0]:33[1]:33[2]:0[3]:0[4]:0[5]:1[6]:33[7]:33[8]:ff[9]:26[10]:1e[11]:19 Sending the addr list to target... Enabling filtering... OID_802_3_MULTICAST_LIST: Len:18 [0]:33[1]:33[2]:0[3]:0[4]:0[5]:1[6]:33[7]:33[8]:0[9]:0[10]:0[11]:c[12]: 33[13]:33[14]:ff[15]:26[16]:1e[17]:19 Sending the addr list to target... Enabling filtering... RSSI=-200 RSSI=-200 ZCF:: LogEvent close current failed EAPOL session for [PVWNET05].. OID_802_11_SSIDRSSI=-200 RSSI=-200 RSSI=-200 RSSI=-200 RSSI=-200 RSSI=-200 RSSI=-200 RSSI=-200 RSSI=-200 RSSI=-200 RSSI=-200 Data Abort: Thread=83c190a8 Proc=815a6320 'device.exe' AKY=00000005 PC=03fb4c70(coredll.dll+0x00054c70) RA=00000000(??? +0x00000000) BVA=06d3066e FSR=00000003 Tag: 64 bit processor Tag: 102440
  - 15
    - I2C/KernelIOControl/OMAP2430 Hi All, I am working on I2C driver for SDP OMAP2430.Things are working fine till I2CTransact (I2C.C) calls "KernelIoControl(IOCTL_KERNELI2C_SUBMIT,..) , from where I am expecting it to go to OalIoctlKernelI2CSubmit (in ioctl.c, correct me if I am wrong) which in turn calls KERNELI2C_PreemptibleSubmit (kerneli2c.c). My problem is It is stucking when it calls KernelIoControl and after that I am unable to trace the control !! . I am getting no debug messages I have put in either of the files ioctl.c,kerneli2c.c. Presently I can not put breakpoints ... can anybody tells me HOW I CAN TRACE OUT THE CONTROL and where exactly probable is the problem in the I2C Driver. Thanks in advamce. Regards, Nagesh Tag: 64 bit processor Tag: 102438
  - 16
    - Debug output of WZCSVC.DLL How do I enable the debug output of WZCSVC.DLL ? I built my imagei ndebug mode, copied the WZCSVC.DLL and pasted it in the release directory. I gave a makeimg. Is this correct ? I'm not sure whether WZCSVC.DLL is giving all debug msgs. I tried setting WZCSVC:DWORD:65535 in HKLM/DebugZones. I'm not seeing any difference. Any suggestions ? Tag: 64 bit processor Tag: 102437
  - 17
    - RAS server not supported (?) Hi, (Initially I posted this question as a reply to an old thread. My apologies if it was already replied to). I'm trying to use the RAS server sample for the serial connection, and receive an "ERROR_NOT_SUPPORTED" error code (50) from the RAS_RasIOControl function. I am using an ARMV4I board with wince 5.0. I added the PPP/RAS and the TAPI components. I added the following lines to the project.reg file: [HKEY_LOCAL_MACHINE\Comm\ppp\Server\Parms] "Enable"=dword:1 [HKEY_LOCAL_MACHINE\Comm\ppp\Server\Line\"Serial Cable on COM port"\] "Enable"=dword:1 "DeviceType"="direct" "Flags"=dword:2 (and tried to run it without them) I tried to use the RASIOControl function wth RASCNTL_SERVER_GET_STATUS and to enable it, and received the same error. I could not find any instructions regarding this application, aside for usage. Is there anything missing? Thanks in advance, ~Y. Tag: 64 bit processor Tag: 102436
  - 18
    - Preventing a PC booting from USB mass storage device We are developing a new device that connects to the PC using USB mass storage and presents the internal flash as a drive. Unfortunately we've discovered that if you attach the device to a PC when it's turned off then boot it, depending on the BIOS settings it may try and boot from the device. Is there any way of preventing this? It's really more of a USB question than Windows CE but I've tried searching and while there are hundreds of websites describing how to set up a USB mass storage boot device, I can't find any telling you how to do the opposite! Thanks. Tag: 64 bit processor Tag: 102435
  - 19
    - Environmental variable Hi all, O.S wince 6.0 My batch file is same for many BSPs. There are many if conditions in it, so on giving sysgen i wanted to know which variables are set, Is there any way to do this? Thanks and regards, Sankarraj Tag: 64 bit processor Tag: 102434
  - 20
    - How to configure password in telnetd server in WinCe 6.0 target. Hi, I am trying to use telnet with authentication in my WinCE 6.0 target. In registry I have modified following entries: [HKEY_LOCAL_MACHINE\COMM\TELNETD] "IsEnabled"=dword:1 "UseAuthentication"=dword:1 "UserList"="my_user" When I run a telnet to my target I am asked about a user and password, like user I use my_user (configured in registry), but for password I do not know what key I have to use. I have tried with empty key but it does not work. where I have to configure the password for each user. Any tip? In msdn help only talk about add user but not setting a password. Thanks, Tag: 64 bit processor Tag: 102427
  - 21
    - TransBusAddrToStatic I am trying to get a "static" address to pass to an ISR and I cannot get TransBusAddrToStatic to return TRUE, If I pass the exact same parameters to TransBusAddrToVirtual I get a valid virtual address I can use to address my device, but when I call TransBusAddrToStatic with the same parameters it returns a false ? Can anyone shed some light on what the difference is and how I can debug this one ? thanks, Joe W. Tag: 64 bit processor Tag: 102420
  - 22
    - CE 6.0 Parallel port printing problem Hi, Thanks in advanced. In Windows CE 6.0 ADD Printer Wizard shows only Network printer port. If I connected USB Printer then it shows LPT2 and Network printer ports. I want to add Parallel and COM printers in the CE 6. but it can not show LPT1 And COM ports. But Microsoft Wordpad and Internet Explorer (Ce 6.0) Printer Applet shows all ports properly in their applet ... ie COM1 : 9600, COM2 : 9600, LPT1, LPT2 (If USB connected), Network. My registry setting is [HKEY_LOCAL_MACHINE\Printers\Ports] "Port1"="COM1: 9600" "Port2"="COM2: 9600" "Port3"="LPT1:" "Port4"="NET0:" Also I try with Windows CE 5.0 it works fine.. no issue. I compare printer sources (RDP Folder) and registry settings of CE 5 and CE 6 .. all are same. Please reply as early as possible... with regards, Pradip Shinde. Tag: 64 bit processor Tag: 102418
  - 23
    - Evaluation Version Hello, a colleage of me have installed Evaluation Edition of Windows CE 6.0 and got a key on 4th of Feb 2007. It should be working for 180 days and such big time we need, because having a big product we need time to check if it will work under Windows CE or not. But unfortunately, yesterday Evaluation was already expired and message "TimeBomb" comes from makeimg tool during Sysgen of NK.BIN. It seems to be 150 days version ??? Or where is the problem?? This is very disappointed, because we need 2 weeks more testing to decide if we produce a product for Windows CE or not. Tag: 64 bit processor Tag: 102416
  - 24
    - productkey of wince6.0 Hi all, I install the winCE6.0 evaluation version but it is asking for the productkey for which i created a account. but still i am not able to get the product key.please give some suggestion. Tag: 64 bit processor Tag: 102413
  - 25
    - USB Bulk in issue Hi all, I am writing a USB client driver. I faced a issue about USB bulk in. I call usb function Trans = (UsbFuncs->lpIssueBulkTransfer)( hBulkInPipe, BulkRxComplete, // Notify function pContext, (USB_IN_TRANSFER|USB_SHORT_TRANSFER_OK|USB_NO_WAIT), 2048, pContext->TransferBuffer, 0); after bulk in completed, the BulkRxComplete() will be called. in my BulkRxComplete() BulkRxComplete() { ... bRc = (UsbFuncs->lpGetTransferStatus)( Trans, &dwBytesTransferred , &dwUsbErr); bRc = (UsbFuncs->lpCloseTransfer)(Trans); ... } I want to the number(dwBytesTransferred) of bytes transferred. dwBytesTransferred should be the actully byte counts in USB bulk in. But I found the dwBytesTransferred might large then actually USB packet length and aligned to 16 or 32 bytes. That means a usb bulk in packet length is 99 bytes but dwBytesTransferred=128. Is anything wrong in my code? Or just Windows CE USB host drvier add some padding bytes? I am looking for your response and thanks in advance Best Regards, //Claude Tag: 64 bit processor Tag: 102411

Hi all,
O.S-Win CE 4.2.
Processor - AMD turion 64 bit
I wanted to confirm whether wince 4.2 supports the above processor, since in
the wince architecture it has been mentioned has 32-bit operating system???
or any changes required???
Thanks in advance,
Regards,
Sankarraj, S

Top

Re: 64 bit processor by Steve

Steve
Mon Jul 09 10:05:03 CDT 2007

Windows CE supports 32 bit processors only at this time. If that particular
chip has a "legacy" 32 bit mode of operation, then that should is likely to
still work with Windows CE, but I'd say it was a bit on the far side of
overkill!

"Sankarraj" <Sankarraj@discussions.microsoft.com> wrote in message
news:8D578EB4-1B93-4A5B-8C9C-A9814048D139@microsoft.com...
> Hi all,
> O.S-Win CE 4.2.
> Processor - AMD turion 64 bit
> I wanted to confirm whether wince 4.2 supports the above processor, since
> in
> the wince architecture it has been mentioned has 32-bit operating
> system???
> or any changes required???
> Thanks in advance,
> Regards,
> Sankarraj, S

Top