Hi all,
I'm trying to boot an i855gme-based board with wince 5.0. I'm using loadcepc.
Below there is the log I got from the serial port, while booting the
eboot.bin and then downloading via ethernet the nk.bin.
The display just show a message "jumping to 0x00225738".
Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built
Mar 19 2008 12:22:00 Found ICH with DeviceID=0x3580 Microsoft Windows CE
Ethernet Bootloader 3.5 for Intel 855GM/855GME board (Mar 17 2008) Boot Args
@ 0x1DF66 and ucLoaderFlags is 1 PCI Device Configurations (2 PCI bus(es)
present)...
========================================================
Bus, Device, Function = 0, 0, 1
Vendor ID, Device ID = 0x8086, 0x3584
Base Class, Subclass = 8, 128 => BASE_SYSTEM_DEV
Interrupt = 0
========================================================
Bus, Device, Function = 0, 0, 3
Vendor ID, Device ID = 0x8086, 0x3585
Base Class, Subclass = 8, 128 => BASE_SYSTEM_DEV
Interrupt = 0
========================================================
Bus, Device, Function = 0, 2, 0
Vendor ID, Device ID = 0x8086, 0x3582
Base Class, Subclass = 3, 0 => DISPLAY_CTLR
Interrupt = 9
BaseAddress[0] = 0xD8000000 (Memory)
BaseAddress[1] = 0xEFF00000 (Memory)
BaseAddress[2] = 0xECF8 (I/O)
========================================================
Bus, Device, Function = 0, 2, 1
Vendor ID, Device ID = 0x8086, 0x3582
Base Class, Subclass = 3, 128 => DISPLAY_CTLR
Interrupt = 0
BaseAddress[0] = 0xE0000000 (Memory)
BaseAddress[1] = 0xEFE80000 (Memory)
========================================================
Bus, Device, Function = 0, 29, 0
Vendor ID, Device ID = 0x8086, 0x24C2
Base Class, Subclass = 12, 3 => SERIAL_BUS_CTLR
Interrupt = 9
BaseAddress[4] = 0xECA0 (I/O)
========================================================
Bus, Device, Function = 0, 29, 1
Vendor ID, Device ID = 0x8086, 0x24C4
Base Class, Subclass = 12, 3 => SERIAL_BUS_CTLR
Interrupt = 5
BaseAddress[4] = 0xECC0 (I/O)
========================================================
Bus, Device, Function = 0, 31, 1
Vendor ID, Device ID = 0x8086, 0x24CB
Base Class, Subclass = 1, 1 => MASS_STORAGE_CTLR
Interrupt = 255
BaseAddress[0] = 0x0 (I/O)
BaseAddress[1] = 0x0 (I/O)
BaseAddress[2] = 0x0 (I/O)
BaseAddress[3] = 0x0 (I/O)
BaseAddress[4] = 0xECE0 (I/O)
========================================================
Bus, Device, Function = 0, 31, 3
Vendor ID, Device ID = 0x8086, 0x24C3
Base Class, Subclass = 12, 5 => SERIAL_BUS_CTLR
Interrupt = 10
BaseAddress[4] = 0xF400 (I/O)
========================================================
Bus, Device, Function = 0, 31, 5
Vendor ID, Device ID = 0x8086, 0x24C5
Base Class, Subclass = 4, 1 => MULTIMEDIA_DEV
Interrupt = 10
BaseAddress[0] = 0xE800 (I/O)
BaseAddress[1] = 0xEC40 (I/O)
BaseAddress[2] = 0xEFFFFC00 (Memory)
BaseAddress[3] = 0xEFFFFF00 (Memory)
========================================================
Bus, Device, Function = 1, 7, 1
Vendor ID, Device ID = 0x0000, 0x0000
Base Class, Subclass = 0, 0 => PRE_20
Interrupt = 0
========================================================
Bus, Device, Function = 1, 7, 2
Vendor ID, Device ID = 0x0000, 0x0000
Base Class, Subclass = 0, 0 => PRE_20
Interrupt = 0
========================================================
Bus, Device, Function = 1, 7, 3
Vendor ID, Device ID = 0x0000, 0x0000
Base Class, Subclass = 0, 0 => PRE_20
Interrupt = 0
========================================================
Bus, Device, Function = 1, 7, 4
Vendor ID, Device ID = 0x0000, 0x0000
Base Class, Subclass = 0, 0 => PRE_20
Interrupt = 0
========================================================
Bus, Device, Function = 1, 7, 5
Vendor ID, Device ID = 0x0000, 0x0000
Base Class, Subclass = 0, 0 => PRE_20
Interrupt = 0
========================================================
Bus, Device, Function = 1, 7, 6
Vendor ID, Device ID = 0x0000, 0x0000
Base Class, Subclass = 0, 0 => PRE_20
Interrupt = 0
========================================================
Bus, Device, Function = 1, 7, 7
Vendor ID, Device ID = 0x0000, 0x0000
Base Class, Subclass = 0, 0 => PRE_20
Interrupt = 0
========================================================
Bus, Device, Function = 1, 8, 0
Vendor ID, Device ID = 0x8086, 0x103A
Base Class, Subclass = 2, 0 => NETWORK_CTLR
Interrupt = 6
BaseAddress[0] = 0xEFDFF000 (Memory)
BaseAddress[1] = 0xDCC0 (I/O)
========================================================
InitKitlNIC: Searching for PCI Ethernet NIC (dwIrq = 0, dwIoBase = 0,
dwDfltType = 2) ...
FindI825xx: Searching for I825xxx Ethernet NIC ...
FindI825xx: Found Ethernet NIC 0x103A
InitKitlNIC: Found Intel NIC (type = 10, IRQ=6, IOBase=0xDCC0).
I825xxInitDMABuffer: Start.
I825xxInitDMABuffer: End.
I825xxInit: Start.
eth825xx_init: Baseaddress = DCC0.
nicInit link speed (100Mb).
I825xxInit: End.
Returned MAC Address:00:C0:08:82:8D:66
System ready!
Preparing for download...
OEMPreDownload ucLoaderFlags is 0
x86KitlCreateName: Using Device Name 'IA3236198'
Using device name: IA3236198
Hit ENTER within 3 seconds to enter static IP address!InitDHCP():: Calling
ProcessDHCP() ProcessDHCP()::DHCP_INIT Got Response from DHCP server, IP
address: 10.11.2.112
ProcessDHCP()::DHCP IP Address Resolved as 10.11.2.112, netmask: 255.255.0.0
Lease time: 5184000 seconds Got Response from DHCP server, IP address:
10.11.2.112 No ARP response in 2 seconds, assuming ownership of 10.11.2.112
+EbootSendBootmeAndWaitForTftp
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Locked Down Link 1
Src IP 10.11.2.112 Port 0800 Dest IP 10.11.2.123 Port 05F6
EthDown::TFTPD_OPEN::boot.bin
-EbootSendBootmeAndWaitForTftp
Download file information:
-----------------------------------------------------
[0]: Address=0x220000 Length=0xF78E94 Name=
****** OEMVerifyMemory Checking Range [ 0x220000 ==> 0x1198E93 ]
****** RAM Address ******
rom_offset=0x80000000.
ROMHDR at Address 00220044h
OEMLaunch ucLoaderFlags is 7
Download successful! Jumping to image at 00225738h...
Got EDBG_CMD_JUMPIMG
Got EDBG_CMD_CONFIG, flags:0x00000000
Lauch Windows CE from address 0x225738
Debug Serial Init
SysInit: GDTBase=811990e8 IDTBase=811ba860 KData=811c1800 Windows CE Kernel
for i486 Built on Feb 8 2007 at 23:34:04 g_pPageDir = 811db000
RTC - Status Reg B - 0x02 X86Init done, OEMAddressTable
= 80225758.
OEMIoControl: Unsupported Code 0x101008c - device 0x0101 func 35
The same happens if I load the nk.bin from the CF I'm using as local disk.
Can anybody help me?
Thanks
Alessandro