How prism2 WLAN PCMCIA Driver work

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - WindowsEntry required for prism2 WLAN PCMCIA Driver?? Hi all , I am using "Intersil Prism2 WLAN PCMCIA Driver" i fetches some problem with "islp2nds.dll" file it Loadded when it recognize the driver but after some time it is Unloadded automatically. Is any body know why this is happening ? Is any Windows or Register enteries Require for this?? Thank You in Adavance Best Regards Swapnil Manglekar Tag: How prism2 WLAN PCMCIA Driver work Tag: 111742
  - 2
    - Windows Enteries for Intersil Prism2 WLAN PCMCIA Driver?? Hi all, My board recognize "Intersil Prism2 WLAN PCMCIA Driver" but the "ISLP2NDS.DLL" is Loadded for sometime after that it is automatically Unloadded Is any windows entery missing? I posted my .reg entries Is any entry missing in that?? [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCC_QUANTUM] "Dll"="pcc_zeus.dll" "Order"=dword:2 "ClientIrq"=dword:1c ; Client Irq ;"Irq"=multi_sz:"2A", "29" ; CSC (42) and CD (41) Irqs ;"SysIntr"=multi_sz:"15", "0" ; CSC (21) and CD (0) SysIntrs ; "Irq"=dword:2A ; CSC (42) "SysIntr"=dword:1d ; CSC (17) ;"PollingMode"=dword:1 "PollingMode"=dword:0 ;"PollTimeout"=dword:200 "SlotNumber"=dword:0 "PCCARDDLL"="pcc_serv.dll" ;"NoISR"=dword:1 ; Do not load any ISR. "IClass"=multi_sz:"{57430CF2-A260-4c9b-8F5C-FEF89217FE7C}=%b","{44985F1F-2C07-4009-A6B7-D250785D5336}=%b"[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCC_QUANTUM\WindowEntry1] "RepeatCount"=dword:1 ; 1 instance of the memory window "WindowInfoWindowCaps"=dword:2 ; WIN_CAP_ATTRIBUTE "WindowInfoMemoryCaps"=dword:10 ; Restored "WindowInfoMemMinSize"=dword:00001000 ; require 4k alignment "WindowInfoMemMaxSize"=dword:04000000 ; 64MB attribute memory window "WindowInfoMemBase"=dword:28000000 ; base address of the memory window[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCC_QUANTUM\WindowEntry2] "RepeatCount"=dword:1 ; 2 instance of the memory window "WindowInfoWindowCaps"=dword:1 ; WIN_CAP_COMMON "WindowInfoMemoryCaps"=dword:10 ; MEM_CAP_16BIT | MEM_CAP_8BIT "WindowInfoMemMinSize"=dword:00001000 ; require 4k alignment "WindowInfoMemMaxSize"=dword:04000000 ; 64MB common memory window "WindowInfoMemBase"=dword:2C000000 ; base address of the memory window[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCC_QUANTUM\WindowEntry3] "RepeatCount"=dword:3 ; 2 instances of the IO window "WindowInfoWindowCaps"=dword:4 ; WIN_CAP_IO "WindowInfoIOCaps"=dword:10 ; IO_CAP_8BIT | IO_CAP_16BIT "WindowInfoIOMinSize"=dword:1000 ; require 4 byte alignment "WindowInfoIOMaxSize"=dword:02000000 "WindowInfoIOGranularity"=dword:1 "WindowInfoIOFirstByte"=dword:20000000 "WindowInfoIOLastByte"=dword:21ffffff "WindowStateState"=dword:1 ; WIN_STATE_MAPS_IO[HKEY_LOCAL_MACHINE\Drivers\PCCARD\PCMCIA\TEMPLATE\PCMCIA] "Dll"="pcmcia.dll" "NoConfig"=dword:1 "NoISR"=dword:1 "IClass"=multi_sz:"{6BEAB08A-8914-42fd-B33F-61968B9AAB32}=PCMCIA CardServices"[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\PCMCIA] "Folder"="CFDisk"[HKEY_LOCAL_MACHINE\Drivers\PCCARD\PCMCIA\TEMPLATE\PCMCIA\CF_Card-CFA] "Dll"="ATADISK.DLL" "Prefix"="DSK" "Ioctl"=dword:4 "Profile"="PCMCIA" "FSD"="FATFS.DLL"; Indicate we are a power manageable interface and astorage driver "IClass"=multi_sz:"{8DD679CE-8AB4-43c8-A14A-EA4963FAA715}","{A4E7EDDA-E575-4252-9D6B-4195D48BB865}"[HKEY_LOCAL_MACHINE\Drivers\PCCARD\PCMCIA\TEMPLATE\PCMCIA\_-IEEE_802.11_Wireless_LAN/PC_Card-7EA7] "Dll"="NDIS.DLL" "Prefix"="NDS" "Miniport"="ISLP2"[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Detect\50] "Dll"="ATADISK.DLL" "Entry"="DetectATADisk"Thanks in AdavanceBest RegardsSwapnil Manglekar Tag: How prism2 WLAN PCMCIA Driver work Tag: 111738
  - 3
    - dhcp server from ce 5.0 hi? I have been implementing a NAT device using Ce 5.0. I have 4 lan ports and 1 wan port. And I configured a dhcp server for lan port by following registry setting. But I couldn't any document about setting dns server address for dhcp server setting. [HKEY_LOCAL_MACHINE\Comm\RTL81392\Parms\TcpIp] "EnableDHCP"=dword:0 "UseZeroBroadcast"=dword:0 "DefaultGateway"="192.168.0.1" "IpAddress"="192.168.0.1" "Subnetmask"="255.255.255.0" "DNS"="192.168.1.254.1" [HKEY_LOCAL_MACHINE\Comm\Tcpip\Parms] "IpEnableRouter"=dword:1 "EnableDHCP"=dword:1 [HKEY_LOCAL_MACHINE\Comm\ConnectionSharing] "DHCPLeaseTime"=dword:300 "EnablePacketFiltering"=dword:1 "DhcpAllocationStartRange"="2" "DhcpAllocationEndRange"="100" "EnableDhcpAllocator"=dword:1 "PrivateInterface"="RTL81392" "EnableAddressTranslation"=dword:1 "PublicInterface"="RTL81391" A pc connected with lan port got IP address from the dhcp server. But the dhcp client pc didn't get a dns server address because there was no setting for dns server. Doesn't the dhcp server from ce support dns server allocation? Tag: How prism2 WLAN PCMCIA Driver work Tag: 111732
  - 4
    - $3 core License Design Template Hi, May I know which is the best design templates (beside "custom device") to use for platform builder 5 if we are targeting for a $3 core license. Thanks Tag: How prism2 WLAN PCMCIA Driver work Tag: 111731
  - 5
    - System stop after resume from suspend ... Hi, The system thread stop running when resume from suspend state... ..............OSD_DebugCommsResume......................... Xllp_SuspendResume: State Restored: ResumePhase2Data=xa00ff420->xa00ff420 Xllp_SuspendResume: Wake Reason: PEDR=x00000002, PKSR=x00000000, ISCR=x00000000, IER=x00000000 Xllp_SuspendResume: Exit: (entry_CPSR=xa0000093) Xllp_SuspendResume: Exit: RCNR=x00000001, RTAR=x00000000, RTSR=x00000000, PICR=x00000000 Xllp_SuspendResume: Exit: RYAR1=x000fa622, RDAR1=x005a0000 Xllp_SuspendResume: Exit: OSCR0=x8251edb3, OSMR0=x8250a9fd, OIER=x00000001 Xllp_SuspendResume: Exit: OMCR4=x00000000, OMCR5=x00000000, OMCR6=x00000000, OMCR7=x00000000 OEMPowerOff: Xllp_SuspendAndResume(x804397a0) returned x00000000 OEMPowerOff: g_oalWakeSource => SYSWAKE_POWER_BUTTON(x00000403) 0x87d1ec64: Back from OEMPowerOff 0x87d1ec64: Calling device manager power proc. 0x87d1ec64: +FYS_PowerUp 0x87d1ec64: send low battery patch 0x87d1ec64: -FYS_PowerUp 0x87d1ec64: Calling GWES power proc. 0x87d1ec64: Returning to normally scheduled programming. I had check that the OS timer 0 interrup is running and by right the scheduler should continue to run... Do any one had faced this problem? -- Message posted via PocketPCJunkies.com http://www.pocketpcjunkies.com/Uwe/Forums.aspx/wince-pb/200804/1 Tag: How prism2 WLAN PCMCIA Driver work Tag: 111729
  - 6
    - Out-Of-Memory UI of windows ce 5.0 does not response to touch Dear All: The OOM UI does not response to touch. I added debug message for touch down and up in PDD. And also i added debug message for touch MDD receiving point from PDD. This is used to check the point and touch flags, such as down, valid, ... etc. I could see those debug messages and they are correct, point value and touch flags are all correct. But the OOM UI does not response to touch event. I used USB keyboard and the OOM UI could response to keyboard. I could use keyboard to select which applications to terminate. Why the OOM UI does not response to touch? Sincerely Tag: How prism2 WLAN PCMCIA Driver work Tag: 111728
  - 7
    - DirectDraw problem with wince 6.0 (LX800) Hi , I had build a wince 6.00 runtime for a Geode LX800 with DirectDraw support ! So far all look like well ! But I couln't launch the DDX programms for testing DDraw ! Here the debug messages : WPCSHELL: SHRecognizeGesture found WM_LBUTTONUP, dropping out of loop... DirectDraw Debug Runtime in use. AddToProcessInputLocaleTable: Added process to ProcessInputLocale table, hProcess = 0x01A6000A ERROR: C:\ymzki\private\winceos\COREOS\gwe\winmgr\wmbase\.\wbase.cpp line 1325: !bFound, etc. GWES Hook fails device creation. DirectDrawCreate fails. DDEX2: DirectDrawCreate FAILED DeleteFromProcessInputLocaleTable: Deleted process from ProcessInputLocale table, hProcess: 0x01A6000A anybody have an idea ? In wince 5.00 ddraw works fine with the Geode LX800 BTW: According the readme.txt the driver supports Direct Draw Display Driver Release Notes Version 1.01.03 Thanks in advance ! Helmut Tag: How prism2 WLAN PCMCIA Driver work Tag: 111715
  - 8
    - PB catalogue viewer doesn't know how to deal with #include in your PB scans .bib files to determine if the requirements are fulfilled for a catalogue entry to get checked to show that it is included (through <Module>xxxx</Module> entries in your catalogue entry). In our case we were seeing that PB failed to determine that the module was included and we got an X mark in front of our catalogue entry. We found out this was caused by including the entries for the modules through a #include file in our project .bib file. If we included the contents of that include file in our .bib PB would happily check our catalogue entry. So, the following does not work: ; file: project.bib #define PROJ_FILES_DIR $(_PUBLICROOT)\PROJ\OAK\FILES moduleA.dll $(_flatreleasedir)\moduleA.dll NK #include "$(PROJ_FILES_DIR)someotherstuff.bib" ---- ; file: someotherstuff.bib moduleB.dll $(_flatreleasedir)\moduleB.dll NK And the following works ; file: project.bib moduleA.dll $(_flatreleasedir)\moduleA.dll NK moduleB.dll $(_flatreleasedir)\moduleB.dll NK It is not really a major problem or anything but I would have expected that PB would know how to deal with including files into your .bib file (with respect to the catalog viewer). In our case there's lots to include and separating them just makes sense. Maybe MS can fix this or at least make users aware of ? -- Ronald Tag: How prism2 WLAN PCMCIA Driver work Tag: 111711
  - 9
    - Does ISLP2NDS.DLL work with Intersil Prism2 WLAN PCMCIA Driver ? hi all,Does ISLP2NDS.DLL work with the Intersil Prism2 WLAN PCMCIA DriverIn my case ISLP2NDS.DLL is loadded and unloadded why it doing like that Reg. Enteries are:;; PCMCIA slot 0[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCC_QUANTUM] "Dll"="pcc_zeus.dll" "Order"=dword:2 "ClientIrq"=dword:1c ; Client Irq;"Irq"=multi_sz:"2A", "29" ; CSC (42) and CD (41) Irqs;"SysIntr"=multi_sz:"15", "0" ; CSC (21) and CD (0) SysIntrs; "Irq"=dword:2A ; CSC (42) "SysIntr"=dword:1d ; CSC (17);"PollingMode"=dword:1 "PollingMode"=dword:0;"PollTimeout"=dword:200 "SlotNumber"=dword:0 "PCCARDDLL"="pcc_serv.dll";"NoISR"=dword:1 ; Do not load any ISR. "IClass"=multi_sz:"{57430CF2-A260-4c9b-8F5C-FEF89217FE7C}=%b","{44985F1F-2C07-4009-A6B7-D250785D5336}=%b"[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCC_QUANTUM\WindowEntry1] "RepeatCount"=dword:1 ; 1 instance of the memory window "WindowInfoWindowCaps"=dword:2 ; WIN_CAP_ATTRIBUTE "WindowInfoMemoryCaps"=dword:10 ; Restored "WindowInfoMemMinSize"=dword:00001000 ; require 4k alignment "WindowInfoMemMaxSize"=dword:04000000 ; 64MB attribute memory window "WindowInfoMemBase"=dword:28000000 ; base address of the memory window[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCC_QUANTUM\WindowEntry2] "RepeatCount"=dword:1 ; 2 instance of the memory window "WindowInfoWindowCaps"=dword:1 ; WIN_CAP_COMMON "WindowInfoMemoryCaps"=dword:10 ; MEM_CAP_16BIT | MEM_CAP_8BIT "WindowInfoMemMinSize"=dword:00001000 ; require 4k alignment "WindowInfoMemMaxSize"=dword:04000000 ; 64MB common memory window "WindowInfoMemBase"=dword:2C000000 ; base address of the memory window[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCC_QUANTUM\WindowEntry3] "RepeatCount"=dword:3 ; 2 instances of the IO window "WindowInfoWindowCaps"=dword:4 ; WIN_CAP_IO "WindowInfoIOCaps"=dword:10 ; IO_CAP_8BIT | IO_CAP_16BIT "WindowInfoIOMinSize"=dword:1000 ; require 4 byte alignment "WindowInfoIOMaxSize"=dword:02000000 "WindowInfoIOGranularity"=dword:1 "WindowInfoIOFirstByte"=dword:20000000 "WindowInfoIOLastByte"=dword:21ffffff "WindowStateState"=dword:1 ; WIN_STATE_MAPS_IO[HKEY_LOCAL_MACHINE\Drivers\PCCARD\PCMCIA\TEMPLATE\PCMCIA] "Dll"="pcmcia.dll" "NoConfig"=dword:1 "NoISR"=dword:1 "IClass"=multi_sz:"{6BEAB08A-8914-42fd-B33F-61968B9AAB32}=PCMCIA Card Services"[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\PCMCIA] "Folder"="CFDisk"[HKEY_LOCAL_MACHINE\Drivers\PCCARD\PCMCIA\TEMPLATE\PCMCIA\CF_Card-CFA] "Dll"="ATADISK.DLL" "Prefix"="DSK" "Ioctl"=dword:4 "Profile"="PCMCIA" "FSD"="FATFS.DLL"; Indicate we are a power manageable interface and a storage driver "IClass"=multi_sz:"{8DD679CE-8AB4-43c8-A14A-EA4963FAA715}","{A4E7EDDA-E575-4252-9D6B-4195D48BB865}"[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\_-IEEE_802.11_Wireless_LAN/PC_Card-7EA7] "Dll"="NDIS.DLL" "Prefix"="NDS" "Miniport"="ISLP2"[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Detect\50] "Dll"="ATADISK.DLL" "Entry"="DetectATADisk"Is any registry settings are required rather than this entries?and my program o/p:4294830685 PID:a7e998be TID:a7d523f2 0x87d52984: SES:CreateDeviceID _-IEEE_802.11_Wireless_LAN/PC_Card-7EA7 done4294830698 PID:a7e998be TID:a7d523f2 0x87d52984: SES:CreateDeviceID _-IEEE_802.11_Wireless_LAN/PC_Card-7EA7 done4294830731 PID:a7e998be TID:a7e99192 0x87eddd28: ZCF:: InfContext [0x4f1b0] created..4294830806 PID:a7e998be TID:a7e99192 0x87eddd28: ZCF:: Warning! File[c:\macallan\private\winceos\comm\layer2svc\zeroconfig\server\state.c] -- Line[464] : DevioGetIntfStats failed for Intf context 0x0004F1B04294830825 PID:a7e998be TID:67d30fda 0x87d4c9b8: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\PCMCIA\_-IEEE_802.11_Wireless_LAN/PC_Card-7EA7\BusPrefix) returned 24294832130 PID:a7e998be TID:a7e99192 0x87eddd28: ZCF:: $$$ IntfContext [0x4f1b0] deleted..4294832150 PID:a7e998be TID:a7e99192 0x87eddd28: ZCF:: InfContext [0x4f1b0] created..4294832344 PID:a7e998be TID:a7e99192 0x87eddd28: ZCF:: Warning! File[c:\macallan\private\winceos\comm\layer2svc\zeroconfig\server\state.c] -- Line[464] : DevioGetIntfStats failed for Intf context 0x0004F1B04294832375 PID:a7e998be TID:a7e99192 0x87eddd28: ZCF:: $$$ IntfContext [0x4f1b0] deleted..4294832386 PID:a7e998be TID:a7e99192 0x87eddd28: WLCLIENT:: CreateFile() failed on [WLS1:], OK during bootup4294832513 PID:a7e998be TID:a7e99192 0x87eddd28: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\WLSVC\BusPrefix) returned 24294834658 PID:a7e998be TID:87e6c1aa 0x87ed9400: [NOTIFY] HandleSystemEvent 7 /ADD ZCF1:4294834992 PID:a7e998be TID:67d30fda 0x87d4c9b8: >>> Loading module islp2nds.dll at address 0x036D0000-0x037F7000 (RW data at 0x01F0F000-0x01F97C4E)Loaded symbols for 'E:\WINCE500\PBWORKSPACES\ZEUSZBIG\RELDIR\ZEUS_ARMV4I_DEBUG\ISLP2NDS.DLL'4294836221 PID:a7e998be TID:67d30fda 0x87d4c9b8: ==>NdisInitializeWrapper4294836232 PID:a7e998be TID:67d30fda 0x87d4c9b8: <==NdisInitializeWrapper4294836241 PID:a7e998be TID:67d30fda 0x87d4c9b8: ==>NdisMRegisterMiniport: NdisWrapperHandle 000533904294836252 PID:a7e998be TID:67d30fda 0x87d4c9b8: ==>ndisRegisterMiniportDriver: NdisWrapperHandle 000533904294836270 PID:a7e998be TID:67d30fda 0x87d4c9b8: <==ndisRegisterMiniportDriver: MiniBlock 000534004294836281 PID:a7e998be TID:67d30fda 0x87d4c9b8: NdisMRegisterMiniport: MiniBlock 000534004294836308 PID:a7e998be TID:a7e99192 0x87eddd28: >>> Loading module oneex.dll at address 0x038A0000-0x038EA000 (RW data at 0x01F9C000-0x01F9F9DC)Loaded symbols for 'E:\WINCE500\PBWORKSPACES\ZEUSZBIG\RELDIR\ZEUS_ARMV4I_DEBUG\ONEEX.DLL'4294842068 PID:a7e998be TID:a7e99192 0x87eddd28: >>> Loading module wzcsapi.dll at address 0x03990000-0x03997000 (RW data at 0x01FAB000-0x01FAB494)Loaded symbols for 'E:\WINCE500\PBWORKSPACES\ZEUSZBIG\RELDIR\ZEUS_ARMV4I_DEBUG\WZCSAPI.DLL'4294842084 PID:a7e998be TID:a7e99192 0x87eddd28: >>> Loading module wlsvc.dll at address 0x038F0000-0x0392F000 (RW data at 0x01FA1000-0x01FA179C)Loaded symbols for 'E:\WINCE500\PBWORKSPACES\ZEUSZBIG\RELDIR\ZEUS_ARMV4I_DEBUG\WLSVC.DLL'4294842141 PID:a7e998be TID:67d30fda 0x87d4c9b8: <==NdisMRegisterMiniport: MiniBlock 00053400, Status 04294842166 PID:a7e998be TID:67d30fda 0x87d4c9b8: 4294842177 PID:a7e998be TID:67d30fda 0x87d4c9b8: ndisMInitializeAdapter: Miniport 00054960, 4294842198 PID:a7e998be TID:67d30fda 0x87d4c9b8: ==>ndisQueueMiniportOnDriver: Miniport 00054960, MiniBlock 000534004294842210 PID:a7e998be TID:67d30fda 0x87d4c9b8: <==ndisQueueMiniportOnDriver: Miniport 00054960, MiniBlock 00053400, rc 14294842233 PID:a7e998be TID:c7e09846 0x87d98bb0: GetDhcpLease(DM90002): failed badly!4294844463 PID:a7e998be TID:67d30fda 0x87d4c9b8: ==>NdisMSetAttributesEx: Miniport 000549604294844582 PID:a7e998be TID:67d30fda 0x87d4c9b8: (+) STATUS PDCardGetWindow()4294844591 PID:a7e998be TID:67d30fda 0x87d4c9b8: In CPcmciaCardSocket* GetSocket()4294844602 PID:a7e998be TID:67d30fda 0x87d4c9b8: (+)CPcmciaCardSocket* ObjectBySocket4294844641 PID:a7e998be TID:67d30fda 0x87d4c9b8: (-)CPcmciaCardSocket* ObjectBySocket4294844653 PID:a7e998be TID:67d30fda 0x87d4c9b8: if( pSocket != NULL ) (-) STATUS PDCardGetWindow()4294844664 PID:a7e998be TID:67d30fda 0x87d4c9b8: (+) STATUS PDCardGetWindow()4294844779 PID:a7e998be TID:67d30fda 0x87d4c9b8: In CPcmciaCardSocket* GetSocket()4294844802 PID:a7e998be TID:67d30fda 0x87d4c9b8: (+)CPcmciaCardSocket* ObjectBySocket4294844827 PID:a7e998be TID:67d30fda 0x87d4c9b8: (-)CPcmciaCardSocket* ObjectBySocket4294844861 PID:a7e998be TID:67d30fda 0x87d4c9b8: if( pSocket != NULL ) (-) STATUS PDCardGetWindow()4294844879 PID:a7e998be TID:67d30fda 0x87d4c9b8: CPcmciaWindows::CardMapWindowPhysical:RsourceRequest(abcd0001,300,40 )fail!!!4294846228 PID:a7e998be TID:67d30fda 0x87d4c9b8: NDIS: ERROR-INdisGetPcmciaWindow failed 0xc000009a4294846239 PID:a7e998be TID:67d30fda 0x87d4c9b8: (+) STATUS PDCardGetWindow()4294846248 PID:a7e998be TID:67d30fda 0x87d4c9b8: In CPcmciaCardSocket* GetSocket()4294846257 PID:a7e998be TID:67d30fda 0x87d4c9b8: (+)CPcmciaCardSocket* ObjectBySocket4294846287 PID:a7e998be TID:67d30fda 0x87d4c9b8: (-)CPcmciaCardSocket* ObjectBySocket4294846297 PID:a7e998be TID:67d30fda 0x87d4c9b8: if( pSocket != NULL ) (-) STATUS PDCardGetWindow()4294846315 PID:a7e998be TID:67d30fda 0x87d4c9b8: ==>NdisMDeregisterAdapterShutdownHandler: Miniport 000549604294846327 PID:a7e998be TID:67d30fda 0x87d4c9b8: <==NdisMDeregisterAdapterShutdownHandler: Miniport 000549604294855129 PID:a7e998be TID:a7e99192 0x87eddd28: ONEEX:: InitializeRWLock: SUCCESS -- created Lock <01F9F7E0>4294855145 PID:a7e998be TID:a7e99192 0x87eddd28: ONEEX:: InitializeRWLock: SUCCESS -- created Lock <01F9F834>4294855161 PID:a7e998be TID:a7e99192 0x87eddd28: ONEEX:: InitializeRWLock: SUCCESS -- created Lock <01F9F8F0>4294855177 PID:a7e998be TID:a7e99192 0x87eddd28: ONEEX:: InitializeRWLock: SUCCESS -- created Lock <01F9F8A4>4294855215 PID:a7e998be TID:67d30fda 0x87d4c9b8: ***NDIS*** (b, 2078) 4294855223 PID:a7e998be TID:67d30fda 0x87d4c9b8: INIT FAILURE: Dequeueing the miniport from the driver block.4294855268 PID:a7e998be TID:67d30fda 0x87d4c9b8: ==>ndisDeQueueMiniportOnDriver, Miniport 00054960, MiniBlock 000534004294855280 PID:a7e998be TID:67d30fda 0x87d4c9b8: <==ndisDeQueueMiniportOnDriver: Miniport 00054960, MiniBlock 000534004294855293 PID:a7e998be TID:67d30fda 0x87d4c9b8: ***NDIS*** (b, 2105) 4294855301 PID:a7e998be TID:67d30fda 0x87d4c9b8: INIT FAILURE: Dereferencing the miniport block.4294855312 PID:a7e998be TID:67d30fda 0x87d4c9b8: ndisDereferenceMiniport:Miniport 00054960, Ref = 04294855330 PID:a7e998be TID:a7e99192 0x87eddd28: >>> Loading module rsaenh.dll at address 0x01E70000-0x01E99000Loaded 'E:\WINCE500\PBWORKSPACES\ZEUSZBIG\RELDIR\ZEUS_ARMV4I_DEBUG\RSAENH.DLL', no matching symbolic information found.4294857241 PID:a7e998be TID:67d30fda 0x87d4c9b8: ==>ndisMUnload: DriverObject 000547D04294857260 PID:a7e998be TID:67d30fda 0x87d4c9b8: ndisMUnload: MiniBlock 000534004294857274 PID:a7e998be TID:67d30fda 0x87d4c9b8: <==ndisMUnload: DriverObject 000547D0, MiniBlock 000534004294857898 PID:a7e998be TID:67d30fda 0x87d4c9b8: <<< Unloading module islp2nds.dll at address 0x036D0000-0x037F7000 (RW data at 0x01F0F000-0x01F97C4E)Unloaded symbols for 'E:\WINCE500\PBWORKSPACES\ZEUSZBIG\RELDIR\ZEUS_ARMV4I_DEBUG\ISLP2NDS.DLL'Is any body know why it happening???Thank you in advanceSwapnil Manglekar Tag: How prism2 WLAN PCMCIA Driver work Tag: 111709
  - 10
    - RTL 8139 Hello! I am using RTL 8139 In Wince 5.0. In Platformbuilder they are given the RTL 8139 driver On Catalog item. I was add that driver. I am doing the following entry in Project.reg ;RTL8139 Driver [HKEY_LOCAL_MACHINE\Comm\RTL8139] "DisplayName"="Realtek RTL 8139 based Fast Ethernet Driver" "Group"="NDIS" "ImagePath"="rtl8139.dll" [HKEY_LOCAL_MACHINE\Comm\RTL8139\Linkage] "Route"=multi_sz:"RTL81391" [HKEY_LOCAL_MACHINE\Comm\Tcpip\Linkage] "Bind"=multi_sz:"PPP","RTL81391" [HKEY_LOCAL_MACHINE\Comm\RTL81391\Parms] "BusNumber"=dword:0 "BusType"=dword:5 "IoBaseAddress"=dword:e000 "Transceiver"=dword:3 "CardType"=dword:1 "SysIntr"=dword:1f [HKEY_LOCAL_MACHINE\Comm\PCI\RTL81391\Parms\Tcpip] "EnableDHCP"=dword:1 "DefaultGateway"="" "UseZeroBroadcast"=dword:0 "IpAddress"="0.0.0.0" "Subnetmask"="0.0.0.0" But I was tried to ping other Pc It shows Me the following message transmit failed,error code 11010. Suppose this means my driver is not supported Then pls suggest proper driver for RTL 8139 or give me the changes of the driver files. Thnak you. Tag: How prism2 WLAN PCMCIA Driver work Tag: 111707
  - 11
    - How to assign a Mouted Volume Name Hi, I am running WinCE 5.0 with a NAND flash which have 2 partition for user to use. And now I just want to name them as the 2 partitions as "Apple" and "Orange" However, I don't know how should I set the registry. If I using the following registry, I will only get the name: "Apple" and "Apple2" by default which same as the help file say: "Folder" Indicates the base name to use when a volume is mounted on this store. Default value is "LOC_STORE_DEFAULT_FOLDER". If the requested name is already in use, then a number is concatenated to the base name and increased each time. So is there any API I can rename the partition's folder name? Or there are some registry setting I can make use of? Thanks a lot for any help~ [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\NandFlash] "Dll"="nandfcd.dll" "Order"=dword:0 "Prefix"="DSK" "Profile"="FlashDisk" "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" "FriendlyName"="NAND FLASH Driver" ; These can overridden in the particular named profile ; Various Flags ; AutoFormat - Formats the store automatically ; AutoPart - Automatically partitions the store with largest creatable partition ; AutoMount - Automatically Mounts each detected partition (if FSD driver is available) ; MountFlags (deprecated in WinCE 5.0)- Flags on how the partition is mounted ; 1 - Hidden file system ; 2 - May contain system registry ; 4 - Mount as root of file system, "\" ; 8 - Hide ROM when mounting FS root ; 10 - Mount filesystem as an external ROM filesystem ; 20 - Treat all files and subdirectories as system files ; The following registry values replace the MountFlags: ; MountHidden - Hidden file system (same as MountFlags=1) ; MountAsBootable - May contain system registry (same as MountFlags=2) ; MountAsRoot - Mount as root of file system, "\" (same as MountFlags=4) ; MountAsROM - Mount as an external ROM filesystem (same as MountFlags=10) ; MountSystem - Treat all files and subdirectories as system files (same as MountFlags=20) [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\FlashDisk] "Name"="NAND FLASH" "DefaultFileSystem"="FATFS" "AutoMount"=dword:1 ; Auto part and format disk if no partitions are present. ; WARNING! This can cause long boot times when encountering a fresh disk. "AutoPart"=dword:1 "AutoFormat"=dword:1 ; Default values for fatfs. These can be overridden per profile ; Flags DWORD See available flags below ; Valid Bits for Flags registry value ;FATFS_UPDATE_ACCESS 0x00000001 update access times if set ;FATFS_DISABLE_LOG 0x00000002 disable event logging if set ;FATFS_DISABLE_AUTOSCAN 0x00000004 disable automatic ScanVolume() ;FATFS_VERIFY_WRITES 0x00000008 verify all writes (as opposed to a handful) ;FATFS_ENABLE_BACKUP_FAT 0x00000010 add a backup FAT to all formats ;FATFS_FORCE_WRITETHROUGH 0x00000020 Force fat to be always writethrough ;FATFS_DISABLE_AUTOFORMAT 0x00000040 disable automatic formatting of unformatted volumes ;FATFS_WFWS_NOWRITETHRU 0x00010000 disable writethrough on WriteFileWithSeek API, ; improve memory-mapped file performance ;FATFS_DISABLE_FORMAT 0x00020000 disable format ;FATFS_TRANS_DATA 0x00040000 transact data on a write (i.e. clone cluster on every write) ;FATFS_TFAT_USECLUS1 0x00080000 Use cluster 1 entry in FAT table for TFAT transaction. ; By default, TFAT uses the NOF field of the boot sector ;FATFS_DISABLE_TFAT_REDIR 0x00100000 Indicates to disable redirect the root directory ; to another hidden directory for FAT12 or 16, ; since root dir isn't transacted in those cases ;FATFS_TFAT_ALWAYS 0x00200000 Always mark transaction status, even only one sector in FAT is changed ;FATFS_FORCE_TFAT 0x00400000 Force TFAT transactioning even if volume isn't formatted as TFAT ; NOTES: common.reg default is "Flags"=dword:00000064 [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\FlashDisk\FATFS] ; Override common setting to enable automatic formatting of unformatted volumes "Folder"="Apple" "Flags"=dword:00000024 Tag: How prism2 WLAN PCMCIA Driver work Tag: 111705
  - 12
    - Hide my own files Hi, I need to hide my customized gina files away from the user. Basically, the gina file resides in the \windows folder. I can write file system filter to hide files in the external storage device but not the persistant store. How can I go about hiding the files ? Tag: How prism2 WLAN PCMCIA Driver work Tag: 111702
  - 13
    - WinCE 6.0 questions Hello to all of you I have several questions about Windows CE 6.0. So if you would know the answer, please help. 1. In WinCE 5.0, a dll file loaded into memory needs 64 kB, even if it is smaller. So if I need to load more small dlls, it consumes too much virtual memory space. In WinCE 6.0 this problem is gone, right? Can anybody explain why? I know new WinCE 6.0 memory model but are there any changes in rules of dll loading? 2. In Platform builder in WinCE 5.0 I can see rough OS image size. Is it possible to see this value in Visual Studio with WinCE 6.0 plugin? 3. I need to remove some files from my OS image, for smaller size. I would like to remove windowsce.bmp logo file, for example. Are there any way, how to do it in some project files (project.bib, ...)? 4. I need to add some dependecies in my BSP catalog. For example, I have I2C driver and drivers for keyboard and display attached to this BUS. If I add the keyboard driver, I2C driver must be added automaticaly. It can by done by setting some catalog item values, it's easy. But are there any other way? If I try to remove I2C driver, it's not naturally possible. IDE will say to remove (own, i.e. I2C driver) value, which is set by other dependent items. But I think it would be better to display the list of names of all dependent items, which this value set. Is it possible to do it? 5. And finally, in *.db file I can define both database structure and some initial content (for example some names or phone numbers), right? Thanks to everybody, who will answer for some questions! George H. Tag: How prism2 WLAN PCMCIA Driver work Tag: 111699
  - 14
    - view list of dll in nand.bin file Hello all, Am working on windows mobile I would like to see the list of all the dll in the NAND.bin file. I have tried with viewbin -t nand.bin and viewbin -d nand.bin.it is not giving the list of dlls. Can you please tell me what is the command to see list of dll in nand.bin file? Thanks in advance -senthil Tag: How prism2 WLAN PCMCIA Driver work Tag: 111693
  - 15
    - What feature is Needed to support GetIpForwardTable function? I added IP Helper API feature to my ce 5.0 ,but GetIpForwardTable function always return ERROR_NOT_SUPPORTED when I call it. Why? Do I need add other features to my workspace? Tag: How prism2 WLAN PCMCIA Driver work Tag: 111685
  - 16
    - .NET compact frmework 2.0 in catalog Hi: Have any one using Platform builder (Windows CE 5.0) and with .NET compact framework 2.0? How can I added the .NET compact framework 2.0 into platform builder's catalog, just like the version 1.0 was in the catalog. So new platform project, I could simple add it into the workspace! I need some help about it. Thanks Lu Tag: How prism2 WLAN PCMCIA Driver work Tag: 111681
  - 17
    - PB 6.0 Sysgen and 6.0 Footprint Hi, we are starting to use the VS2005 with PB 6.0 Plugin and noticed the following things: 1)is it possible that the sysgen build time takes longer in 6.0 than a similar 5.0 image? 2)The 6.0 Footprint is bigger than a similar 5.0 Image Best regards -- Javier Grijalba www.contendosystems.com Embedded Systems J.Grijalba at Contendosystems dot com Tag: How prism2 WLAN PCMCIA Driver work Tag: 111677
  - 18
    - ANN: Road Map for Windows Embedded Microsoft Charts Its Road Map for Windows Embedded Business <URL:http://www.microsoft.com/presspass/press/2008/apr08/04-15RoadMapEmbeddedPR.mspx> Windows CE => Windows Embedded Compact. -- Thomas Scheidegger - 'NETMaster' http://www.cetus-links.org/oo_dotnet.html - http://dnetmaster.net/ Tag: How prism2 WLAN PCMCIA Driver work Tag: 111672
  - 19
    - PB5.0: ActiveSync & USB problem Hi, platform: PXA270 (Toradex Colibri) i build WinCe 5.0 with USB Function->Serial, RNDIS, ActiveSync support, but my WinCE 5.0 image says: "Port Not Aviable" "Cannot connect to PC. Stop any programs that may be using a connection, and try again...." when i thy to connect USB plug. Could you help me in this problem? Tag: How prism2 WLAN PCMCIA Driver work Tag: 111669
  - 20
    - WinCE 6.0 stress test problem caused by Software-based Input Panel I'm running into a WinCE 6.0 stress test problem caused by Software- based Input Panel (SIP) component. The test environment is: - Windows XP with SP2 - Visual Studio 2005 - Visual Studio 2005 SP1 - Windows Embedded CE 6.0 Platform Builder - Windows Embedded CE 6.0 SP1 (required if PB 6.0 Tools have been installed) - Windows Embedded CE 6.0 R2 - Windows Embedded CE 6.0 Cumulative Product Update Rollup 12/31/2007 - Windows Embedded CE 6.0 Monthly Update (January ~ March 2008) The workspace configuration is: <FeatureCollection Name="AnchoredFeatures" EnforceUniqueItems="True"> <Feature Name="Item" CatalogItemId="Item:MS:sysgen_msim" /> <Feature Name="Item" CatalogItemId="Item:MS:sysgen_shell" /> <Feature Name="Item" CatalogItemId="Item:MS:sysgen_standardshell" / > <Feature Name="Item" CatalogItemId="Item:MS:sysgen_touch" /> <Feature Name="Item" CatalogItemId="Item:MS:sysgen_ddraw" /> <Feature Name="Item" CatalogItemId="Item:MS:sysgen_wcetk" /> <Feature Name="Item" CatalogItemId="Item:MS:sysgen_coreloc" /> </FeatureCollection> System always gets a "Data Abort" exception at the point of ~20 minutes running. The call stack of the exception is below. K.COREDLL!wcslen + 4 bytes GWES!GweMemory_t::NewDuplicateString() line 231 + 8 bytes GWES!ListBox::CreateCopyOfString() line 1211 + 16 bytes GWES!ListBox::InsertItem() line 1358 + 16 bytes GWES!ListBox::ListWndProc() line 6427 GWES!CWindow::CallWindowProcW_I(CePtr_t<long (__cdecl*)(HWND__ *,unsigned int,unsigned int,long)> {...}, SendMsgEntry_t * 0xc0237cf8) line 2448 + 24 bytes GWES!MsgQueue::DispatchReceivedMsg() line 2917 + 48 bytes GWES!MsgQueue::GetEvent(unsigned int 0x8822a450, tagMSG * 0x8824cffc) line 3133 GWES!MsgQueue::SendMessageWithOptions(unsigned int 0x00000000) line 3829 + 36 bytes GWES!MsgQueue::SendMessageW_I() line 5012 + 32 bytes GWES!MsgQueue::SendMessageW_E() line 4950 COREDLL!SendMessageW() line 2916 SOFTKB!SIP_IOControl(unsigned char * 0x00000000, unsigned long 0x00090000, unsigned long * 0x00000009) line 211 UDEVICE!UserDriver::Ioctl() line 456 + 64 bytes UDEVICE!00011c48() KERNEL!NKHandleCall() line 1950 + 12 bytes K.COREDLL!DirectHandleCall() line 76 K.COREDLL!xxx_DeviceIoControl(void * 0x00000000, unsigned long 0x00000000, unsigned long * 0x00000000, _OVERLAPPED * 0x00000000) line 33 DEVMGR!CReflector::SendIoControl(void * 0x00000000, unsigned long 0x00000000, unsigned long * 0x00000000) line 304 DEVMGR!CFileFolder::Control(void * 0x00000000, unsigned long 0x00000000, unsigned long * 0x00000000) line 930 DEVMGR!Reflector_Control(void * 0x00000000, unsigned long 0x00000000, unsigned long * 0x00000000) line 1008 DEVMGR!DM_DevDeviceIoControl(void * 0x00000000, unsigned long 0x00000006, unsigned long * 0xd1fbf89c, _OVERLAPPED * 0x00000000) line 453 + 52 bytes COREDLL!xxx_DeviceIoControl(void * 0x88230a5c, unsigned long 0xd2070000, unsigned long * 0xd2060000, _OVERLAPPED * 0xd22dfcc8) line 33 COREDLL!SipImmSetActiveContextNotify(HKL__ * 0x8c2f0138) line 589 COREDLL!ImmSetActiveContext(struct HWND__ *,unsigned long,int) + 528 bytes K.COREDLL!xxx_PerformCallBack4() line 293 K.COREDLL!ImmSetActiveContextInOwnerProcess() line 570 + 20 bytes K.COREDLL!ImmSetActiveContext(struct HWND__ *,unsigned long,int) + 76 bytes GWES!ImmThunk_ImmSetActiveContext() line 217 GWES!MsgQueue::PreprocessReceivedMsg(long 0x00000000, bool * 0xd1fbfa65) line 1357 GWES!MsgQueue::SendMessageWithOptions(unsigned int 0x00000000) line 3753 GWES!MsgQueue::SetUicFocus() line 1041 GWES!SetFocus_I() line 1696 + 16 bytes COREDLL!DefWindowProcW() line 3133 CLIENTSIDE!000193dc() K.COREDLL!xxx_PerformCallBack4() line 293 GWES!WindowProcCallback(unsigned int 0xd1fbfc30, long 0xc00a8694, bool * 0x03660002) line 2312 + 20 bytes GWES!CWindow::CallWindowProcW_I(CePtr_t<long (__cdecl*)(HWND__ *,unsigned int,unsigned int,long)> {...}, SendMsgEntry_t * 0x00018f84) line 2473 + 44 bytes GWES!MsgQueue::SendMessageWithOptions(unsigned int 0x00000000) line 3770 + 44 bytes GWES!MsgQueue::SetUicActiveWindow() line 708 GWES!MsgQueue::PreprocessReceivedMsg(long 0x000000e0, bool * 0xd1fbfd64) line 1342 GWES!MsgQueue::GetEvent(unsigned int 0xd1fbfd68, tagMSG * 0x700232ac) line 3191 GWES!MsgQueue::GetMessageW_I() line 5331 COREDLL!GetMessageW() line 2927 CLIENTSIDE!0001959c() COREDLL!ThreadBaseFunc() line 1097 Looking at the call stack, we can find that the exception has something to do with SIP. When I remove the catalog item "Software- based Input Panel (SIP) --> SIP for Small Screens (SYSGEN_MSIM)" from the run-time image, system can pass the stress test, running over 800 minutes with 99% Test Pass Percentage. Does anyone experience this problem? Any comments will be appreciated. Regards, Shawn Tag: How prism2 WLAN PCMCIA Driver work Tag: 111667
  - 21
    - develop a PCI driver for INTEL IXDP 425 with winCE 4.2 using eVC hi all can anyone give me some clues where to start? I need a minimal demo project to create a PCI driver . my debugger is supported with ethernet basd debugger connected to the Embedded visual c++ (win CE 4.2) every time I write to the PCI controll registers the debugger hangs. can I read all the registers of the PCI to try and understand the valid configuration of PCI to support the debugger??? tX ori Tag: How prism2 WLAN PCMCIA Driver work Tag: 111659
  - 22
    - Duplicatehandle Hi, I have a pxa270 BSP that was probably ported from Wince5 to CE6.0. The GPIO driver allows me to set interrupts on a GPIO pin. But it is not working. After investigating I found that the InterruptInitialize() in the driver failed with code 87. I found the following article and implemented this : http://groups.google.com/group/microsoft.public.windowsce.platbuilder/browse_thread/thread/63a4495704f113af/e11f31bfa5be37c2?lnk=st&q=duplicatehandle+wince#e11f31bfa5be37c2 Now the InterruptInitialize() succeeds (after duplicating the event handle that was passed from the application), but I still donot see any interrupts. I use WaitForSingleObject() on the ORIGINAL event-handle, is this the problem ? Should I be waiting on the duplicated handle ? in that case I would need to pass it back to the app first. That makes me wonder if it would be better to let the Driver instantiate the event in the first place, instead of passing it twice... Please advise.... Greetings, Rob Tag: How prism2 WLAN PCMCIA Driver work Tag: 111657
  - 23
    - SDIO and SD Bus driver .. Hi I got a problem about an IO card.(in WM6) The IO card initiate success with SD bus driver(The driver's dir is SDBusDriver), and work correctly. The sd bus driver doesnt support SDHC. But When I replace the SD bus driver that get from \WM606\PUBLIC\COMMON\OAK\DRIVERS\SDCARD\SDBUS (it supports SDHC). It initizte fail. I check debug message. The all initializtion commands are successful, but fail in loading client driver It fail in the statement --> m_pDriverFolder->LoadDevice(); the messages are in the following: ---------------------------------------------- SDHSlotOptionHandler - called - SetSlotInterface : Clock Setting: 25000000 SDHSlotOptionHandler - called - SetSlotInterface : setting for 4 bit mode SDClockOn - Requested Rate: 25000000, Setting clock rate to 20000000 Hz CertVerify: StellusSDIO.dll trust = 2 Prefetch Abort: Thread=8b9c1000 Proc=885613a0 'device.exe' AKY=00000005 PC=00000000(???+0x00000000) RA=01235444(stellussdio.dll+0x00005444) BVA=00000000 FSR=000004f0 RaiseException: Thread=8b9c1000 Proc=885613a0 'device.exe' AKY=00000005 PC=03f6c3c4(coredll.dll+0x0001e3c4) RA=882086a4(NK.EXE+0x000086a4) BVA=00000001 FSR=00000001 ------------------------------------------------------ Is it the new sd bus driver's problem?? BR Jack Tag: How prism2 WLAN PCMCIA Driver work Tag: 111651
  - 24
    - Phone call handling Hi, I want to handle incoming phone call alert / message alert instead of it is handled by the OS. It is just like hook my application for handling these events rather than system. Also is it possible to block software interrupts for some time. Please help me. Waiting for the reply. Thanks & Regards, Rahul -- Message posted via PocketPCJunkies.com http://www.pocketpcjunkies.com/Uwe/Forums.aspx/wince-pb/200804/1 Tag: How prism2 WLAN PCMCIA Driver work Tag: 111642
  - 25
    - how to build tcpmp on ce5.0? hi? I'm trying to port the tcpmp src to ce 5.0 based x86 board. I downloaded the tcpmp v 0.72r1 src and open the .vcw project file with evc4. Of course, I installed the sdk for my x86 machine. But when I ran the build, there were a lot of errors. It seems the build system may seek linux(unix) header files, unistd.h, strings.h... @@ How can I compile it then? Is there any solver? Tag: How prism2 WLAN PCMCIA Driver work Tag: 111638
- Next
  - 1
    - how to disable Lan in the wince 5.0 Have anyone know, how to disable lan on the wince 5.0 i use c ++ win32 to coding. what's win32 api can implement that. Thanks, Johnny Tag: How prism2 WLAN PCMCIA Driver work Tag: 111637
  - 2
    - File server on CE6.0 I'm trying to get the file server working on CE6.0. I'm essentially porting my application for 5.0 to 6.0. Everything works except for the file server. When SMB is loading I get the following: 4294927578 PID:36b0002 TID:3a80002 Loading Share: Data 4294927639 PID:36b0002 TID:3a80002 SMB_PRINT: Loading Registry: Services\SMBServer\Shares\Data 4294927699 PID:36b0002 TID:3a80002 -- Type: 0 4294927759 PID:36b0002 TID:3a80002 -- Path: \Hard Disk2\filestor 4294927821 PID:36b0002 TID:3a80002 -- ACL: * 4294927881 PID:36b0002 TID:3a80002 -- NOT USING READ-ONLY ACL's! 4294927941 PID:36b0002 TID:3a80002 -- Read-ONLYACL: 4294928003 PID:36b0002 TID:3a80002 SMBSRV-CRACKER: cracker delay thread created 0x920803 4294928064 PID:36b0002 TID:3a80002 WARNING: CreateFileForMapping is being deprecated! Use CreateFile+CloseHandle instead. 4294928125 PID:36b0002 TID:3a80002 SMB-MEMMAP: Error -- cant open file!: 0x3 4294928266 PID:36b0002 TID:3a80002 SMB_PRINT: Error Opening memory map! -- cant continue 4294928328 PID:36b0002 TID:3a80002 -SMB_Init - StartPrintSpool failed 4294928389 PID:36b0002 TID:3a80002 SMB_Init -- an error occured during init... cleaning up 4294928449 PID:36b0002 TID:3a80002 SMBSRV:Stopping TCP transport 4294928510 PID:36b0002 TID:3a80002 SMBSRV:Stopping NETBIOS transport 4294928578 PID:36b0002 TID:3a80002 -SMB_Init There should be plenty of RAM (128megs same setup as our 5.0) so I don't know why it fails the way it does. Any idea of what could be going wrong here? Thanks, Daniel Tag: How prism2 WLAN PCMCIA Driver work Tag: 111636
  - 3
    - WinCE 5.0 FTP server customization question... I've been looking for a way to change the port number used for the FTP server in WinCE V5.0, and it hasn't jumped out at me yet... I can find a way to set the port for the HTTP server, but nothing so far for the FTP. Can somebody point me in the right direction on this? I'd like to change the ftp port to something non-standard so my beta-test customers don't do silly things like deleting my system files from my flash device. (And so DOS attack probes don't identify my FTP port as an open invitation.) Thanks... --- John Berting Tag: How prism2 WLAN PCMCIA Driver work Tag: 111633
  - 4
    - Platform builder 4.2 error Hi all, Windows CE .net 4.2 platform builder Warning!--Unable to initalize catolog-- ?? and c:\wince420\platform\viacepc\kernel\oal\.\cfwpc.c(396) : error C2065: 'CPUID_PAT' : undeclared identifier c:\wince420\platform\viacepc\kernel\oal\.\cfwpc.c(397) : error C4013: 'NKVirtualSetAttributes' undefined; assuming extern returning int c:\wince420\platform\viacepc\kernel\oal\.\cfwpc.c(421) : error C2065: 'PHYSICAL_ADDRESS_UNKNOWN' : undeclared identifier c:\wince420\platform\viacepc\kernel\oal\.\cfwpc.c(421) : error C4047: '!=' : 'int ' differs in levels of indirection from 'void *' c:\wince420\platform\viacepc\kernel\oal\.\cfwpc.c(563) : error C2065: 'CPUID_MSR' : undeclared identifier c:\wince420\platform\viacepc\kernel\oal\.\cfwpc.c(583) : error C2065: 'CPUID_MTRR' : undeclared identifier http://64.233.183.104/search?q=cache:4ZN8UqpHITwJ:www.dmp.com.tw/tech/os-wince/WinCE_Development_Note.pdf+windows+ce+4.2+error&hl=tr&ct=clnk&cd=2&gl=tr No speak english :( sorry Tag: How prism2 WLAN PCMCIA Driver work Tag: 111622
  - 5
    - SDIO CCCR register version bug. Hi, I'm developing a SDIO card driver for wince5, I face a problem about the SDIO CCCR spec version. the CCCR spec version of our SDIO card is 1.2. But in SDBUS driver, it only read the power control register when the CCCR spec version is 1.1.( in shared code Sddevice.cpp, line 1809, and sdhceventhandlers.cpp line 553). So in our case, it won't read the power control register and the card initialization will fail. I believe this is a bug in windows CE driver. I modify that two line and my card can work correctly. Here my doubt is that whether MS have a offical fix for this issue, because I'm afraid if the bug exist in the commerical product, then my SDIO card won't work. Is there anybody face this problem before? Best Regards Liu7290 Tag: How prism2 WLAN PCMCIA Driver work Tag: 111620
  - 6
    - Installing 5.0 BSP on PC with WinCe 6.0 hi all i am having WinCe 6.0 (only )installed on my system . I want to install few 5.0 BSP's (just for referring the source codes). when i try to install 5.0 bsp i get following error "....make sure Platform Builder is installed and has a valid %Winceroot %" Is there any simple workarround like modifying my Pc's Registry / Modifying environment variable / creating some folders in my PC ,so that i would be able to install 5.0 BSP in the PC having only WinCe 6.0 installed . thanks a lot in advance .. Tag: How prism2 WLAN PCMCIA Driver work Tag: 111619
  - 7
    - How to enable SIP upon password request after resume? Hello, I enabled a password at suspend/resume. After resume, the device asks for the password. However, there is no software input panel (SIP) for entering a password :-( I know the sipapi.h for enabling/disabling the SIP - but where can I implement it in order to enable a SIP after resume??? Thank you, Peter Tag: How prism2 WLAN PCMCIA Driver work Tag: 111618
  - 8
    - oemidle()... PB documentation says kernel calls oemidle if it doesn't have any more thread to schedule. But when I actually test it, it seems not like documentation. I ran a wmp playing some contents and at the moment I could see oemidle code has been called simultaneously. ( I added a serial message within the oemidle code from platform directory ) Is anybody who can clear this question? Tag: How prism2 WLAN PCMCIA Driver work Tag: 111614
  - 9
    - Hive registry in wince 5.0 and eboot I have a query in Hive registry. I configured everything correctly for my hive registry in platform.reg. I am getting the following debug messages once OS is booted. FileSystem Starting - starting with clean file system FS: initializing ROM-only file system FS: Registering file system ROM, index 3, flags 0x00000031 FS: Mount complete (ROM, index 3, flags 0x00000031) OEMIoControl: Unsupported Code 0x101008c - device 0x0101 func 35 FSVOL: Opening existing volume FSVOL: Volume heap already initialized FSREG: Mounted ROM portion of boot registry FSVOL: Creating clean virtual volume FSVOL: Initializing volume heap FSREG: Mounted RAM portion of boot registry FS: Creating signal event SYSTEM/DevMgrApiSetReady FS: Creating signal event SYSTEM/PowerManagerReady FS: Creating signal event SYSTEM/GweApiSetReady FS: Creating signal event ReleaseFSD FILESYS: Starting storage manager. FS: Registering file system StoreMgr, index 4, flags 0x00000001 #### FMD_DRIVER:::FMD_INIT (NAND ID In OS :0xec76) OK(ec76). FMD_OEMIoControl Getting Flash information OS End Flash information OS FLASHDRV.DLL:BuildupMappingInfo() - Enter. In Flash Read Block Number 0x0..... Data Abort: Thread=8ddca8c8 Proc=8c05c130 'filesys.exe' AKY=00000003 PC=01dffa00(smflash.dll+0x0000fa00) RA=01dff8b8(smflash.dll+0x0000f8b8) BVA=04000000 FSR=00000007 RaiseException: Thread=8ddca8c8 Proc=8c05c130 'filesys.exe' AKY=00000003 PC=03f6831c(coredll.dll+0x0003831c) RA=80207194(NK.EXE +0x00007194) BVA=00000001 FSR=00000001 Loading partition driver mspart.dll hModule=8DD9B788 Driver mspart.dll loaded CStore Destructor(000A2450) FILESYS: Restarting storage manager. OEMIoControl: Unsupported Code 0x10100cc - device 0x0101 func 51 FILESYS: Starting device and waiting for boot file system. OEMIoControl: Unsupported Code 0x1010024 - device 0x0101 func 9 *** DLL_PROCESS_ATTACH - Current Process: 0x42, ID: 0x8dd9130e *** +InitDeviceFileSystems FS: Registering file system $device, index 5, flags 0x00000001 FS: Registering file system $bus, index 6, flags 0x00000001 -InitDeviceFileSystems: status is 1 Ceddk!CalibrateStallCounter: Enter Ceddk!CalibrateStallCounter: Could not find stall counter Ceddk!BeginCalibration: min(32501) max(36112) Ceddk!BeginCalibration: Calibration timed out (51 tries). Defaulting to 1 ms resolution. FS: Waiting for device to signal BootPhase1 completion DEVICE!DevloadInit DEVICE!InitDevices: Root Key is Drivers\BuiltIn. DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\Prefix) returned 2 DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn \BusPrefix) returned 2 DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\SMFLASH \BusPrefix) returned 2 FILESYS: Starting device and waiting for boot file system. OEMIoControl: Unsupported Code 0x1010024 - device 0x0101 func 9 After this it hangs. My drivers are not loaded. Is there any relation between eboot and Hive registry in OS. Do i need to add all functionality in nand.cpp(in eboot) present in most of the wince Boot loaders FLASHDRV.DLL:How is it loaded: It calls FMD_ReadSector. Is there any reference for studying completely about Hive registry and smflash driver. Please suggest. thanks in advance Kracks Tag: How prism2 WLAN PCMCIA Driver work Tag: 111613
  - 10
    - Password Control Panel applet interferes with RegFlushKey() Hello, When I enable a password for suspend/resume in the password Control Panel applet, suspend my device, resume again and want to change the password again, the background thread fails at RegFlushKey() invocations! A really strange behaviour under CE6! Anybody has a solution to this problem? Thank you, Peter Tag: How prism2 WLAN PCMCIA Driver work Tag: 111609
  - 11
    - Should we study circuitry? Hi Should WinCE BSP or driver engineer study circuitry for driver development , or it is hardware engineer work only ? Thank you. Tag: How prism2 WLAN PCMCIA Driver work Tag: 111601
  - 12
    - Jungo's driver ToolKit Hi I see Jungo's WinDriver Toolkit can support WinCE and Linux OS . Do you think it is worthy of study for WinCE driver development ? Is there other good WinCE driver Toolkit in the market ? Thank you. Tag: How prism2 WLAN PCMCIA Driver work Tag: 111600
  - 13
    - about norflash file system problem Hi, All My system configuration EP9315(ARM9)+WINCE50 with 32MB Norflash, part of it is used to store nk.bin, and the remaind is used as flash disk with HIVE saved in it. The related registry are following ; HIVE BOOT SECTION [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\NORFlash] "Dll"="ep93xxnorflash.dll" "Order"=dword:2 "Prefix"="DSK" "Ioctl"=dword:4 "Profile"="MSFlash" "IClass"="{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" ; Override names in default profile [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash] "Name"="EM9000 NOR Flash" "Folder"="NOR Flash" "AutoMount"=dword:1 "AutoPart"=dword:1 "AutoFormat"=dword:1 "MountAsBootable"=dword:1 [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash\FATFS] "FriendlyName"="TFAT FileSystem" "Dll"="fatfsd.dll" ;Flags registry subkey ; ; FATFS_TFAT_ALWAYS | FATFS_TFAT_NONATOMIC_SECTOR | FATFS_WFWS_NOWRITETHRU | ; FATFS_ENABLE_BACKUP_FAT | FATFS_DISABLE_AUTOSCAN ; "Flags"=dword:00290014 "Paging"=dword:1 "EnableCache"=dword:1 ;improving performance for registry hive file on TFAT volume "EnableWriteBack"=dword:1 ;improving performance for registry hive file on TFAT volume "EnableFatCacheWarm"=dword:1 ;improving performance for registry hive file on TFAT volume "FatCacheSize"=dword:0 ;improving performance for registry hive file on TFAT volume "EnableDataCacheWarm"=dword:1 ;improving performance for registry hive file on TFAT volume "DataCacheSize"=dword:0 ;improving performance for registry hive file on TFAT volume "FormatTfat"=dword:1 ;format the volume as TFAT on auto-format ;not use any more for CE5.0 ; "CacheSize"=dword:0 [HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\MSFlash] "DriverPath"="Drivers\\BuiltIn\\NORFlash" "LoadFlags"=dword:1 "Order"=dword:0 [HKEY_LOCAL_MACHINE\init\BootVars] "SystemHive"="HiveRegistry\\system.hv" "ProfileDir"="HiveRegistry" "Flags"=dword:1 "RegistryFlags"=dword:1 ; END HIVE BOOT SECTION The problem is that the flash disk size may miss 252KB if the power is off during file copy opration. And with many 252KB-missed events, the norflash disk is corrupted. It's appreciated for any advises. Thanks! Cheng Shi Emtronix 5# Gaopeng Dadao, Chengdu China 610041 86-28-86180660 www.emtronix.com Tag: How prism2 WLAN PCMCIA Driver work Tag: 111597
  - 14
    - 5.0 - adding driver/file prevents boot When I add certain files to the OS image the image will no longer boot. For example when I add my Notification LED driver the kernel stops booting at the point of listing memory section. I remove the NLED driver and rebuild and deploy, and it boots fine. It boots fine with serial and ethernet drivers. If I only select the NLED driver, and not the serial or Ethernet the kernel will stop at the same place. Why wouldn't it stop with the Ethernet or Serial drivers? A file is a file is a file right? I need to be clear, it halts at kernel initialization with this additional file. Without it the kernel boot fine without error. It seems the NK.bin image is confused somehow. Any ideas? Joel ; 8C00.0000 -+ ; | ARGS (4KB) ; 8C00.1000 -+ ; | ; | OS (NK) Code ; | ;------------+ **auto-size** ; | ; | OS (NK) RAM ; | ; | ; | ; | ; | ; 9000.0000 -+ 64MB - Top of Bootloader/Kern Init Stack MEMORY ; Name Start Size Type ; ------- -------- -------- ---- RSVD 8C000000 000FF000 RESERVED ARGS 8C0FF000 00001000 RESERVED NK 8C100000 00A00000 RAMIMAGE RAM 8CB00000 03500000 RAM CONFIG AUTOSIZE=ON ViewBin... nk.bin Image Start = 0x8C100000, length = 0x0035D260 Start address = 0x8C100004 Checking record #22 for potential TOC (ROMOFFSET = 0x00000000) Found pTOC = 0x8c3165b4 ROMOFFSET = 0x00000000 Done. From platform.bib: ; ----------------------------------------------------------------------------- IF BSP_SH7763_SERIAL scif.dll $(_FLATRELEASEDIR)\scif.dll NK SH ENDIF BSP_SH7763_SERIAL ; ----------------------------------------------------------------------------- ; ----------------------------------------------------------------------------- IF BSP_SH7763_GETHER celan.dll $(_FLATRELEASEDIR)\celan.dll NK SH ENDIF BSP_NIC_GETHER ; ----------------------------------------------------------------------------- ; ----------------------------------------------------------------------------- ; Notification LED Driver IF BSP_SH7763_NLED nleddrvr.dll $(_FLATRELEASEDIR)\nleddrvr.dll NK SH ENDIF BSP_SH7763_NLED ; ----------------------------------------------------------------------------- Tag: How prism2 WLAN PCMCIA Driver work Tag: 111585
  - 15
    - CreateSurface fails in Ddraw CETK test case 102(WINCE 6.0) While running Ddraw CETK test cases, we get failure in ddraw test case 102 under Wince 6.0 enviorment. DDraw surface creation is failing only for some of the formats, for rest its working. Some of Format under which Ddraw surface creation failes, are as follows: Overlay surface in video memory - (YUV NV12) Overlay surface in video memory - (YUV I420) Overlay surface in video memory - (YUV YUY2) Overlay surface in system memory - (Unspecified Pixel Format) Overlay surface in system memory - (256 color palette) Overlay surface in system memory - (RGB 555) Overlay surface in system memory - (RGB 565) CETK gives only one messges for all of these kind of messages "GWES Hook fails surface creation. IDirectDraw::CreateSurface fails. Could not create surface, continuing" Any idea what are above formats, and what do i need to do in order to provide support for it.. Tag: How prism2 WLAN PCMCIA Driver work Tag: 111566
  - 16
    - CE6.0 KITL Problem.... hi! I building workspace for arm pxa270 wince6.0 Image was built successfully. But when i try to load the image through the platform builder. and enabled "Enable KITL on boot device" flag. My image is not loading. when i clear the flag my image is booting. Why KITL is not working can any hace some idea. This is th error i was getting: !KITLSend(DBGMSG): Reentrant call, Thread Id = 014A0002 Faulted in KCall, pCurThread->dwStartAddr = c0481120, PageFreeCount = 000008d0!! !KITLSend(DBGMSG): Reentrant call, Thread Id = 014A0002 Original Context when thread faulted: !KITLSend(DBGMSG): Reentrant call, Thread Id = 014A0002 Exception 'Prefetch Abort'(3) Thread-Id=014a0002(pth=83eab000) PC=8013b23c BVA=c0b2d000, dwInfo = 00000400 !KITLSend(DBGMSG): Reentrant call, Thread Id = 014A0002 R0=c0b2c2e0 R1=00000000 R2=000012d0 R3=c0b2d000 !KITLSend(DBGMSG): Reentrant call, Thread Id = 014A0002 R4=c049829c R5=00000000 R6=00000000 R7=00000000 !KITLSend(DBGMSG): Reentrant call, Thread Id = 014A0002 R8=00000000 R9=00009999 R10=00001010 R11=d245e388 !KITLSend(DBGMSG): Reentrant call, Thread Id = 014A0002 R12=00000000 SP=d245d900 Lr=c0a9a46c Psr=2000001f !KITLSend(DBGMSG): Reentrant call, Thread Id = 014A0002 Context when faulted in KCall: !KITLSend(DBGMSG): Reentrant call, Thread Id = 014A0002 Exception 'Prefetch Abort'(3) Thread-Id=014a0002(pth=ffffc62c) PC=00000000 BVA=c0b2d000, dwInfo = 00000400 !KITLSend(DBGMSG): Reentrant call, Thread Id = 014A0002 R0=0000000b R1=00000060 R2=821fd400 R3=00000000 !KITLSend(DBGMSG): Reentrant call, Thread Id = 014A0002 R4=821dde38 R5=00000000 R6=821b7870 R7=821b62f0 !KITLSend(DBGMSG): Reentrant call, Thread Id = 014A0002 R8=00000060 R9=821b7870 R10=821fcd20 R11=000000a0 !KITLSend(DBGMSG): Reentrant call, Thread Id = 014A0002 R12=8011af00 SP=ffffc77c Lr=8011af84 Psr=20000013 !KITLSend(DBGMSG): Reentrant call, Thread Id = 014A0002 Exception 'Prefetch Abort' (3): Thread-Id=014a0002(pth=83eab000), Proc- Id=00400002(pprc=82200aa0) 'NK.EXE', VM-active=00400002(pprc=82200aa0) 'NK.EXE' !KITLSend(DBGMSG): Reentrant call, Thread Id = 014A0002 PC=00000000(???+0x00000000) RA=8011af84(NK.EXE+0x0001af84) SP=ffffc77c, BVA=00000000 Faulted in KCall, pCurThread->dwStartAddr = c0481120, PageFreeCount = 000008d0!! Original Context when thread faulted: Exception 'Prefetch Abort'(3) Thread-Id=014a0002(pth=83eab000) PC=8013b23c BVA=c0b2d000, dwInfo = 00000400 R0=c0b2c2e0 R1=00000000 R2=000012d0 R3=c0b2d000 R4=c049829c R5=00000000 R6=00000000 R7=00000000 R8=00000000 R9=00009999 R10=00001010 R11=d245e388 R12=00000000 SP=d245d900 Lr=c0a9a46c Psr=2000001f Context when faulted in KCall: Exception 'Prefetch Abort'(3) Thread-Id=014a0002(pth=ffffbcc8) PC=00000000 BVA=c0b2d000, dwInfo = 00000400 R0=0000000b R1=000002c6 R2=00000000 R3=00000000 R4=821dde38 R5=00000000 R6=821cf470 R7=821b62f0 R8=000002c6 R9=821cf470 R10=821fcd20 R11=00000000 R12=ffffbe28 SP=ffffbe18 Lr=8011af84 Psr=20000093 Exception 'Prefetch Abort' (3): Thread-Id=014a0002(pth=83eab000), Proc- Id=00400002(pprc=82200aa0) 'NK.EXE', VM-active=00400002(pprc=82200aa0) 'NK.EXE' PC=00000000(???+0x00000000) RA=8011af84(NK.EXE+0x0001af84) SP=ffffbe18, BVA=00000000 Recursively calling KDEnableInt(FALSE, psvdThread != NULL) 1 time(s). This OK if KdStub stumbling on its own BP. KdTrap: Exception in debugger, Addr=0x00000000 - attempting to recover RtlDispatchException: returning failure. Flags=0 NK Kernel: DEBUGCHK failed in file C:\ymzki\private\winceos\COREOS\nk \kernel\nknormal\..\apicall.c at line 839 KPSLExceptionHandler: flags=1 ControlPc=fffffffc RtlDispatchException: returning failure. Flags=1 NK Kernel: DEBUGCHK failed in file C:\ymzki\private\winceos\COREOS\nk \kernel\nknormal\..\apicall.c at line 839 NK Kernel: DEBUGCHK failed in file C:\ymzki\private\winceos\COREOS\nk \kernel\nknormal\..\exdsptch.c at line 333 Recursively calling KDEnableInt(FALSE, psvdThread != NULL) 1 time(s). This OK if KdStub stumbling on its own BP. KdTrap: Exception in debugger, Addr=0xFFFFFFFC - unable to recover Can any one suggest me something... Thanks... Tag: How prism2 WLAN PCMCIA Driver work Tag: 111565
  - 17
    - WZCQueryInterface Hi, Im able to successfully query a wirless interface using WZCQueryInterface. But the meida state always returns 0 no matter the actual state. Also, when i grab the StSSID list, on every WZC_WLAN_CONFIG the RSSI is always 0. Most everything else gets filled. Any ideas? Tag: How prism2 WLAN PCMCIA Driver work Tag: 111562
  - 18
    - FindFirstDevice Error 18 Hi, Im trying to use the api function FindFirstDevice on a pda (WinCE 5 & 6). I have set the size of the device info structure, set the devicesearchtype to 3 (search by guid) and passed a pointer to a guid. I have also tried seraching by name and passing a string "*". Every time a get the error code 18. Can anyone help me? Tag: How prism2 WLAN PCMCIA Driver work Tag: 111560
  - 19
    - ENC28j60 SPI Ethernet controller Hello All, I want to implement the ethernet driver for ENC28j60 SPI ethernet controller used for debug ethernet services in windows CE. I am going through the code provided by microchip for ENC28j60 SPI ethernet controller, it is not much related to the function pointers which i need to implement for debug ethernet services for windows CE. If any one used the SPI Ethernet controller can give me ideas to implement the same. or point to some documentation on how to proceed with this controller to implement the debug ethernet services. Thanks in advance. Kumar. Tag: How prism2 WLAN PCMCIA Driver work Tag: 111558
  - 20
    - break point hi? I configured my os design with setting build option to be able to use break point. But I set a break point to a code and boot the target device via ethernet boot, the boot process was not stopped at the break point. The color of the break point is changed but the system is not stopped there. what's wrong? Tag: How prism2 WLAN PCMCIA Driver work Tag: 111555
  - 21
    - Temporary Internet Files: How to delimit the size of this folder ? Using IESample/IESimple, I want to delimit the size of "Temporary Internet Files" folder. I tried all the registry keys "CacheLimit" under "HKEY_CURRENT_USER \Software\Microsoft\Windows\CurrentVersion\Internet Settings \5.0\Cache" and the keys under "HKEY_CURRENT_USER\Software\Microsoft \Internet Explorer\Image Caching" with different values, but it takes no effect neither with CE420 nor with CE500. The folder should not grow about 1 MB, but it seems as if these values were ignored. Regards, Lutz Tag: How prism2 WLAN PCMCIA Driver work Tag: 111553
  - 22
    - PXA not wakeup after suspen.. Hi, Currently i am working on suspend and resume. Basically, i am using the mainstoneii BSP from intel and do some changes to fit to my platform... The suspend part working fine... however, not able to resume(even processor wakeup)... However the GPIO reset is working fine... Do anyone face this problem? Any ideas... Best regards, Thomas -- Message posted via PocketPCJunkies.com http://www.pocketpcjunkies.com/Uwe/Forums.aspx/wince-pb/200804/1 Tag: How prism2 WLAN PCMCIA Driver work Tag: 111551
  - 23
    - Thread in driver Actually I would like to create a driver which I can pass a function pointer in. And the driver is able to do the callback whenever there is an interrupt. Here is my program... File Driver_Main.c void SomeISTThread() { while (TRUE) { /* Wait for the application event to be released */ WaitForSingleObject(Somevent, INFINITE); Callback(); InterruptDone(SomeIntr); } } BOOL WINAPI DllEntry(HANDLE hInstDll, DWORD dwReason, LPVOID lpvReserved) { SomeThread = CreateThread(NULL, 0, (LPTHREAD_START_ROUTINE)SomeISTThread, NULL, 0, NULL); return TRUE; } File Callback.c PVOID callback_function = NULL; void Callback() { if (callback_function != NULL) callback_function(); } void Add_Callback(PVOID callback) { callback_function = callback; } BOOL Is_CallbackExist() { return (callback_function != 0); } In debug mode I can see that my callback pointer is passed into the driver. I can call the callback from the driver. However when an interrupt is triggered. The function Callback reported that the callback_function is NULL (which I saw the same result from debug mode). P.S. I already passed a function pointer in the variable callback_function. And I am able to call the callback function from my application program. Thanks for the help Tag: How prism2 WLAN PCMCIA Driver work Tag: 111546
  - 24
    - TTS Application using SAPI hi i we want to run a small Text to speech application on ce device which has audio driver support so to run TTS application is it sufficient to add SAPI 5.0 catalog component to the OS and then run applications available in \PUBLIC \SPEECH\SDK\SAMPLES\CPP\BASICTTS or do i need to add some more catalog items or some third party tools to achieve it ?? Thanks a lot in advance .. Tag: How prism2 WLAN PCMCIA Driver work Tag: 111545
  - 25
    - Does Windows Ce 6.0 supports TCP/IP offloading? I know Windows CE 5.0 doesn't support offloading ( Correct me if I am wrong!) but what about Windows Ce 6.0 ? Tag: How prism2 WLAN PCMCIA Driver work Tag: 111539

Hi All,

I am working on PXA270 processor in WINCE 5.0 Is any body know how the Prism2

WLAN PCMCIA Driver is working??

Is any Extra Register Enteries are Required??

Thanks in Advance

Best Regards

Swapnil manglekar

Top

Re: How prism2 WLAN PCMCIA Driver work by Michel

Michel
Thu Apr 17 00:47:19 PDT 2008

Posting the same question in different words 4 times will absolutely
make sure it will be treated as spam. Stop doing that and be patient! It
takes some time for your question to appear in the newsgroup after you
press "Send".

Good luck,

Michel Verhagen, eMVP
Check out my blog: http://GuruCE.com/blog

GuruCE Ltd.
Microsoft Embedded Partner
http://GuruCE.com
Consultancy, training and development services.

Swapnil Manglekar wrote:
> Hi All,
>
> I am working on PXA270 processor in WINCE 5.0 Is any body know how the Prism2
>
> WLAN PCMCIA Driver is working??
>
> Is any Extra Register Enteries are Required??
>
> Thanks in Advance
>
> Best Regards
>
> Swapnil manglekar

Top