Web page for IE 6.0

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - distinguish between d3dmobile driver and Direct3D Mobile Component? Hi, could some tell me the distinguish between d3dmobile part in my display driver and Direct3D Mobile Component in Catalog? if there have some confliction bewteen them? or Direct3D mobile Component in Catalog will call d3dmobile in my driver? DongFang Tian Tag: Web page for IE 6.0 Tag: 63367
  - 2
    - Consultant in Phoenix, AZ area available? We would like to hire a Windows CE platform builder expert to help us put the final touches on a CE 4.2 BSP for the TS-7200 embedded ARM board at http://www.embeddedARM.com/epc/ts7200-spec-h.html. Preferred person would be immmediately available and work onsite in our Fountain Hills, AZ office for 2-5 days working closely with our existing engineering staff and teach us a thing or two about Windows CE. We may be willing to pay for airfare if unable to find anybody local. Send me an email at joff@embeddedARM.com if interested. //Jesse Off Tag: Web page for IE 6.0 Tag: 63363
  - 3
    - sdcard.lib -- where can I find it? Hello, I am porting a SDIO driver from CE4.2 using BSquare's SDNow to CE5.0 and built-in SDIO support. The 5.0 doc's say the library to link is 'sdcard.lib' but I cannot find it anywhere in the WINCE500 folders. Do I have to turn on a platform switch in PB to generate it? I *did* find a SdCardLibBase.lib -- is this the same? Thanks, Jon Tag: Web page for IE 6.0 Tag: 63362
  - 4
    - IP address from IM driver Hi all I am trying get the IP address of the Adapter(802.3) from the NDIS IM driver. I couldn't find any OID for this. How to get the IP address of an adapter from NDIS IM Driver? Any help is appreciated. Thanks vary much Ganesan Tag: Web page for IE 6.0 Tag: 63361
  - 5
    - WinCE File Server question I've got a question about the File Server component in WinCE 5.0. I've set up a file server and can access it fine from the network that the CE device is connected to. My question is: Does WinCE support permissions (i.e. read-only, read-write) on the shares exported by the file server? It's not a configuration option in the Remote Administration tool (unless I've forgotten to add some component that gives me that ability). It seems that once a user has access to a CE device, they have read/write access to anything on the shares of the device. Is that a true statement? thanks, Jeff Cooper jeffc@logicpd.com Tag: Web page for IE 6.0 Tag: 63358
  - 6
    - Problem with USB 2.0 and WINCE 5.0 on 855GME/ICH4 Board Hello, i have some problems with the EHCI controller. When I disable the EHCI controller in BIOS and use only the UHCI controller everthing works well. But when I enable the EHCI controller my platform does sometimes not regocnize when I attach or detach a USB device. I have already included the code for the EHCI and 64bit-Extension posted here a few weeks ago. The uhci.dll and ehci.dll are loaded. Perhaps someone can tell me some experiences with that chipset. Regard Frank Tag: Web page for IE 6.0 Tag: 63353
  - 7
    - PEAP Fast Reconnect in CE .NET 4.2 Hi, We have customers who insist on keeping the Fast Reconnect option enabled for PEAP authentication. Our wireless terminal is running CE .NET 4.2, QFE level 2004-Q3. On a warm/cold boot the terminal associates and connects properly. In this case a full handshake conversation takes place. However if the wireless terminal roams or suspends/resumes then it cannot connect anymore. QFE 030930_KB827824 confirms that PEAP Fast Reconnect is not supported in CE .NET 4.2 and specifies in the "More Information" section that: "The fix that is in this update does not add support for PEAP Fast Reconnect to Windows CE .NET. The fix only enables PEAP authentication to continue when the fast reconnection attempt is unsuccessful." When the authentication fails the debug captured from our wireless device shows that: - PEAP phase 1: the session resumption is successful - when phase 2 starts the PEAP server attempts to do fast reconnect (as a result of the successful session resumption in phase 1) - the peer receives the packet: - EAP Request 0x01 - message ID 0x32 (for this particular case) - PEAP version 0 - TLS version 1 - TLS packet content type 0x17 Application Data - TLS data (encrypted) - the peer decrypts the data and detects that the server attempts fast reconnect (this is spelled out in the debug message) - the peer builds a fail response - however the response message ID is 0x04 whereas it is supposed to match the request ID - the response is transmitted - the authenticator (i.e. access point) discards the fail response (see below excerpt form RFC 3748) - the PEAP server does not receive any response and the conversation fails RFC 3748 (EAP) states in section 4.1: "The authenticator is also responsible for discarding Response messages with a non-matching Identifier value before acting on them in any way, including passing them on to the backend authentication server for verification." So apparently the peer although does attempt to continue the conversation it fails to respond correctly as per EAP specs and the whole authentication fails. I should mention that the server is Cisco Secure ACS v3.3 running on a Windows 2003 Server box (although this detail should be irrelevant in this case). Any updates on this issue will be appreciated. Thanks. -Adrian START DEBUG >>>>>>>>> EOL: Supp RX Type=EAPOL_EAP_Packet EAP: Supp RX packet 0x26 bytes: 0000 01 32 00 26 19 00 17 03-01 00 1B F9 E8 C0 1C 35 .2.&...........5 0010 CF 1F 5B E8 CB 51 71 20-2A 96 04 A3 87 87 20 E9 ..[..Qq *..... . 0020 79 2A FD 0C 74 6A - y*..tj EAP: Supp RX Type=Request/Auth 19 Id=50 PEAP: CMakeMessage pRxPacket=64ef8ee Len=38 State=PEAP_STATE_TLS_INPROGRESS EapTlsMakeMessage(swtest)>> Received Request (Code: 1) packet: Id: 50, Length: 38, Type: 13, TLS blob length: 0. Flags: EapTlsCMakeMessageNegotiation successful PEAP: State PEAP_STATE_TLS_INPROGRESS --> PEAP_STATE_TLS_DONE PeapGetTunnelProperties PeapGetTunnelProperties done PeapClientDecryptTunnelData PeapDecryptTunnelData PeapDecryptTunnelData completed with status 0x0 PEAP: Got AVP Status 1 PEAP: Server attempting fast reconnect - not supported, sending fail response PeapEncryptTunnelData PeapEncryptTunnelData completed with status 0x0 EAP: Supp - Action: Send Response/Auth Id=4 EAP: Supp TX Type=Response/Auth 19 Id=4 EAP: Supp TX packet 0x26 bytes: 0000 02 04 00 26 19 00 17 03-01 00 1B57 E2 E0 C0 AA ...&.......W.... 0010 3F 1D D9 72 9F 03 9B C7-69 5D 95 33 8E DF 8E 79 ?..r....i].3...y 0020 00 9B 0F AD F6 39 - .....9 EOL: Supp TX Type=EAPOL_EAP_Packet <<<<<<<<<< END DEBUG Tag: Web page for IE 6.0 Tag: 63352
  - 8
    - network "renew" function Through the GUI, when the unit starts up with the Ethernet connection removed, the network parameters can be seen as having default values. There is a "renew" function to query the DNS for updated TCP/ip configuration information. Is there an API function that an embedded application can call to programmatically cause this "renew" to occur without user invocation? Tag: Web page for IE 6.0 Tag: 63342
  - 9
    - Functions computing the width and height of font cause VIDEO TROUBLES Hi all, I have a quite specific problem (probably related to my custom platform, a build base on WinCE .Net 4.2, ARM 9, application is dev in eVC++ 4 with SP2). All the functions that compute the width and height of the specified string of text for the current selected font make 'video shaking' effect. These functions are: GetTextExtentPoint, DrawText with DT_CALCRECT and GetCharABCWidths. It's really strange. Some of the calls of these functions make the screen changing/shaking for milliseconds - it looks like the video driver is trying to change screen start address. Frankly, don't know where the problem may be. Could you recommend me any solution? or where should I start? Best regards, KrysianZ Tag: Web page for IE 6.0 Tag: 63338
  - 10
    - Functions computing the width and height of font cause VIDEO TROUBLES Hi all, I have a quite specific problem (probably related to my custom platform, a build base on WinCE .Net 4.2, ARM 9, application is dev in eVC++ 4 with SP2). All the functions that compute the width and height of the specified string of text for the current selected font make 'video shaking' effect. These functions are: GetTextExtentPoint, DrawText with DT_CALCRECT and GetCharABCWidths. It's really strange. Some of the calls of these functions make the screen changing/shaking for milliseconds - it looks like the video driver is trying to change screen start address. Frankly, don't know where the problem may be. Could you recommend me any solution? or where should I start? Best regards, KrysianZ Tag: Web page for IE 6.0 Tag: 63337
  - 11
    - CS8900A EthDrv Hi. Did anybody try to use CS8900A stuff from the PUBLIC OAL library? Does it really work? There is no previous transmit pending state cheking in the CS8900ASendFrame routine as it is recommended in the CS8900A datasheet. Thanks. Tag: Web page for IE 6.0 Tag: 63328
  - 12
    - With no input device,Does winCE can boot? For debugging,I remove all input devices and it`s drivers, and winCE halted after explorer.exe excuted.But with no souce code,it`s hard to debug the explorer.exe. I guess that is because there is no input devieces. Is it so?or some any good and conveniency core debug method? 3x. Tag: Web page for IE 6.0 Tag: 63320
  - 13
    - how to test 3D capablity of graphics accelerator in wince? Hi,all I'm working on WINCE5 and PXA27X based platform. our platform use 2700G as graphics accelerator. now we have implement 3D accelerator of 2700G and want to test it in wince but have no idea about it. can someone tell me some test programs or 3D games running in WINCE? or some test ways? best regards DongFang Tian Tag: Web page for IE 6.0 Tag: 63319
  - 14
    - FILLER This is a multi-part message in MIME format. ------=_NextPart_000_0054_01C50792.3B4C4140 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Could someone please tell me what mean the following=20 warning in my build log: .... .... .... MODULES Section Module Section Start Length psize vsize Filler ---------------------- -------- --------- ------- ------- ------- ------ nk.exe FileName 80423ff0 7 FILLER kd.dll FileName 80423ff8 7 FILLER hd.dll FileName 801e8ff4 7 FILLER osaxst0.dll FileName 80392fc4 12 FILLER osaxst1.dll FileName 80392fd0 12 FILLER coredll.dll FileName 80392fdc Warning: Module 12 = FILLER filesys.exe FileName 80392fe8 12 FILLER device.exe FileName 80392ff4 11 FILLER devmgr.dll FileName 8050cfbc 11 FILLER .... .... .... What does really mean "Warning: Module 12 FILLER"? Thanks ------=_NextPart_000_0054_01C50792.3B4C4140 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.2800.1106" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff background=3D""> <DIV><FONT face=3DArial size=3D2>Could someone please tell me what mean = the=20 following <BR>warning in my  build log:<BR><BR><BR><FONT=20 face=3DCourier>....<BR>....<BR>....<BR><BR>MODULES=20 Section<BR>Module         &n= bsp;      =20 Section  Start     Length  = psize  =20 vsize   Filler<BR>---------------------- -------- --------- = -------=20 ------- -------=20 ------<BR>nk.exe         &nb= sp;      =20 FileName 80423ff0       =20 7            =     =20 FILLER<BR>kd.dll         &nb= sp;      =20 FileName 80423ff8       =20 7            =     =20 FILLER<BR>hd.dll         &nb= sp;      =20 FileName 801e8ff4       =20 7            =     =20 FILLER<BR>osaxst0.dll        &nbs= p;  =20 FileName 80392fc4      =20 12           &nbsp= ;    =20 FILLER<BR>osaxst1.dll        &nbs= p;  =20 FileName 80392fd0      =20 12           &nbsp= ;    =20 FILLER<BR>coredll.dll        &nbs= p;  =20 FileName 80392fdc      Warning: Module =20 12           &nbsp= ;    =20 FILLER<BR>filesys.exe        &nbs= p;  =20 FileName 80392fe8      =20 12           &nbsp= ;    =20 FILLER<BR>device.exe        &nbsp= ;   =20 FileName 80392ff4      =20 11           &nbsp= ;    =20 FILLER<BR>devmgr.dll        &nbsp= ;   =20 FileName 8050cfbc      =20 11           &nbsp= ;    =20 FILLER<BR><BR>....<BR>....<BR>....</FONT></FONT></DIV> <DIV><FONT face=3DCourier size=3D2></FONT> </DIV> <DIV><FONT face=3DCourier size=3D2></FONT> </DIV> <DIV><FONT face=3DCourier size=3D2></FONT> </DIV> <DIV><FONT face=3DCourier size=3D2>What does really mean "Warning: = Module  12=20 FILLER"?<BR></FONT></DIV> <DIV><FONT face=3DCourier size=3D2></FONT> </DIV> <DIV><FONT face=3DCourier size=3D2><FONT = face=3DArial>Thanks</FONT></DIV></FONT><FONT=20 face=3DCourier size=3D2></FONT></BODY></HTML> ------=_NextPart_000_0054_01C50792.3B4C4140-- Tag: Web page for IE 6.0 Tag: 63314
  - 15
    - HDD as root file system in CE 5.0 System: X86 with HDD. System has no battery but will completely power-off. When the user installs software in \Windows or any other directory, these files should still be there after a shutdown/restart. I have set the environment variables PRJ_ENABLE_FSMOUNTASROOT = 1 and PRJ_BOOTDEVICE_ATAPI = 1. Documentation also mentions "MountFlags", but these are deprecated in CE 5.0. What more do I have to set to get it working? Thanx, Arthur Tag: Web page for IE 6.0 Tag: 63313
  - 16
    - Want to know how-to work with Remote Tools in PB Hi all, I wanna hook-up my remote tools with the target board where i've put-up my image....which is thru Ethernet Bootloading. Im trying to do a Kernel debugging to the image too and hence i had selected KdStub in the Platfrom settings' 'Debugger' option, and the 'Transport' option as Ethernet.Is this settings right, or should i change it to something else, to work...?? Please someone suggest right was in selecting platform settings and as well other procedures to transport the remote tools functionality... Hi Bruce, I want ur suggestions importantly.. Appreciating in advance. harry_thomas_5 Tag: Web page for IE 6.0 Tag: 63312
  - 17
    - Dll wont map in the image. Im trying to add Bluetooth-USB component in the image and its not mapping in the final image on target.It supposed to have bthusb.dll in the target and not seen.., but it is seen in the Release directory. I hope im including the right component, its bluetooth stack with integrated USB driver, under Bluetooth protocol stack with Transport support driver(Communication Services and Networking- PAN) Can anybody help me out in this asap... appreciate ur help, harry_thomas_5 Tag: Web page for IE 6.0 Tag: 63309
  - 18
    - Building of Eboot directory hai, if i have to build the entire eboot directory under platform\cepc ,what all r the things i have to do,is build -cfs is enough,can anyone help me... it will be very helpful Thanking u Tag: Web page for IE 6.0 Tag: 63307
  - 19
    - Touch Stylus Registry entry Hi, I am integrating USB touch screen to via eden board using WINCE 4.2.net OS. Please tell me the registry setting for "Touch Stylus". Aniruddh. Tag: Web page for IE 6.0 Tag: 63306
  - 20
    - Targetlibs vs sourcelibs hai, 1) for making any exe files we can link static link libraries to that exe,i thought that was Targetlibs ,if that is the case ,what is meant by Sourcelibs.... can anyone pls mention the differences , 2) how to convert an exe file to bin file,same as EBOOT is converted to exe to bin,since in the source file it is written in Targettype=Program Expecting ur early responce Thanking u Tag: Web page for IE 6.0 Tag: 63304
  - 21
    - Where is CeGetVolumeInfo? I would like to use the function CeGetVolumeInfo. As mentioned in MSDN I have linked Storeapi.lib. But this library does not contain the function CeGetVolumeInfo (I have checked the Storeapi.lib with an HexEditor). Why is CeGetVolumeInfo missing? Regards Peter Tag: Web page for IE 6.0 Tag: 63303
  - 22
    - Update QFE problem ( script ) Hi all, I have problem when installing the CE 5.0 QFE. The error msg said " A script required....." . What's the script shall I install befor the QFE? Thanks, Bryan. Tag: Web page for IE 6.0 Tag: 63300
  - 23
    - How to soft-reset a USB device? Dear all, I want to soft-reset a USB device. Is it good to do it at driver-level and how to do? Any idea will give me a hand...Thanks! PS: My OS is WinCE.NET 4.2; HW is Xscale platform Kemin Tag: Web page for IE 6.0 Tag: 63294
  - 24
    - Display driver in WinCE 5.0 Hi, I have a WinCE 5.0 system. System can enter the sleep (suspend) mode, but when system can not wake up. After I trace the codes, I found systems will hang up in sleep(10) of SetVideoPowerState. The same codes work in WinCE 4.2, but it failed in WinCE 5.0. Why ? void SetVideoPowerState(VIDEO_POWER_STATE PowerState) { //This is where the lcd would be turned on or off g_ScreenState = PowerState; if (g_ScreenState == VideoPowerOn) { .......Set some registers Sleep(10); .......Set some registers } ......... } Tag: Web page for IE 6.0 Tag: 63293
  - 25
    - SA1111 compatibility mode in the PXA250/255 - the SDRAM interface for the PXA250/255 has an "SA1111 compatibiltiy mode" WHY? the SA1111 interfaces to the SDRAM a bit differently than the PXA255. Both devices drive the same SDRAM for DMA transfers. So they both must be hooked up the same way. So the PXA255 has a bit you can set that allows you to change the wiring slightly on the SDRAM to match the SA1111. (it involves swapping 2 bits). - I swapped these bits and switched SDRAM to "normal mode". (bit12 of mdcnfg). This should theoretically not be a problem unless the SA1111 trys to do a DMA transfer. DRAM : 2x13x9x32 (bank,row,col,buswidth) - RESULT : the diagnositics crash when doing the SDRAM test. (The SA1111 MBREQ pin in inactive in this test) What am I missing here? There must be something more to this. Any help would be greatly appreciated! -Jeff Tag: Web page for IE 6.0 Tag: 63292
- Next
  - 1
    - How can I make my CE device to a suspend state Hi, First of all (off course...) What platorm / CE version and so on... How do you know it is in shutdown and not suspend? Or do you go to suspend and is resume not working? Piet pietdesomere ad yahoo > HI All, > How can I turn my CE device to a suspend state.When I suspend the device > from StartMenu, it shuts down. > > Thanks > Johns Tag: Web page for IE 6.0 Tag: 63290
  - 2
    - cf card storage driver in 5.0 my device work with different lan cards now, thanks everybody. and now, a different problem. seems storage card is detected as i can see it in control panel->system->expansion card, but i can't see any thing in storage properties. one card do show partition there but i can't mount it. and i can't see active sync in the device. control panel -> connections-> make new connection, direct connection is in gray. in 4.2 these was fairly easy so i guess there's some missing feature in my project? Tag: Web page for IE 6.0 Tag: 63289
  - 3
    - WinCe50 Oal changes How it is possible to change in WinCe5.0 the OAL, e.g. oeminit.asm, by cloning this files into the platform, i.e. without changes in the common drirectories?. The ways used for earlier CE versions do not work for WinCe5.0. Where is referenced the i486oal.lib to use a cloned lib? H. Edgar. Tag: Web page for IE 6.0 Tag: 63288
  - 4
    - audio decoder Hi All, Im working on Mpeg2decoder.Iv a mpeg2player code.The data of player is transfered as streams to the demuxer.In demuxer the audio and video streams has to get separated.Im able to do till here.From the demuxer the audio streams has to be given to the audio decoder(audio codec). My doubt is since WinCE 4.2 has directdraw components which support audio codec and audio renderer,if I add the components to my platform builder,will the OS takecare of audio codec part or should I do coding particularly to audio decoder. Please reply me. Please very urgent! Thanks in advance, Mano. Tag: Web page for IE 6.0 Tag: 63285
  - 5
    - Wireless Preferred list lost on reset HI all, I am developing an ARMV4I based CE V4.2 headless platform with wireless networking support. We are able to connect to a network and access it using wzctool. The system is using a Hive-based registry. The problem we are now trying to solve is this: Set the device up to connect to a network and place that connection in the preferred list. Sometime later power off the device. Power up the device. At this point we would like it to connect to the previous network which appears at the top of the preferred list, but no connection is made. In fact, when queried there is no preferred list for the card. Which part of Windows CE is responsible for keeping the preferred list (wzcsvc) and how do I make it permanent across a reset? Also, I do I force it to reconnect on boot? Thanks in advance Brian Price brianprice_AT_appliedcs_DOT_com_DOT_au Tag: Web page for IE 6.0 Tag: 63280
  - 6
    - about internal file system Hi,all, We have a very strange problem. The following is the configuartion of our platform: CPU:pxa270 flash:32MB SDRAM:64MB display hardware: intel 2700G Let me detail the problem: Our previous OS design has ROM-only file catalog.When we download the nk.bin to target device,it has the following output: 4294776940 PID:43d49426 TID:43e1b002 0x83d394b8: >>> Loading module ws2.dll at address 0x03B10000-0x03B24000 (RW data at 0x01FC3000-0x01FC3B24) 4294776943 PID:43d49426 TID:43e1b002 0x83d394b8: >>> Loading module services.exe at address 0x0E010000-0x0E027000 Loaded symbols for 'D:\SOURCE_CODE\WINCE500\PBWORKSPACES\WINDOWTV\RELDIR\WINDOWTV_ARMV4I_DEBUG\SERVICES.EXE' 4294776992 PID:23d50f7e TID:23fb6ce6 0x83d50d3c: <<< Unloading module oleaut32.dll at address 0x03210000-0x03261000 (RW data at 0x01F47000-0x01F47F04) Unloaded symbols for 'D:\SOURCE_CODE\WINCE500\PBWORKSPACES\WINDOWTV\RELDIR\WINDOWTV_ARMV4I_DEBUG\OLEAUT32.DLL' 4294776996 PID:23d50f7e TID:23fb6ce6 0x83d50d3c: <<< Unloading module ceshell.dll at address 0x02BB0000-0x02C25000 (RW data at 0x01F0A000-0x01F0B380) It downloads some modules,then unload.And it can not display anything. When We Remove ROM-only file system,it works fine and can display.Everything is perfect. We find in winceos.bat that the default internal file system is RAM and ROM file system.It means if we remove ROM-file system,ROM and RAM file system exists in our OS design. We search in Help doc and only find this file (ms-help://MS.WindowsCE.500/wcedata5/html/wce50conSelectingtheInternalFileSystemforyourDevice.htm). And the only difference is that ROM-only file system does not allow applications to place files in the object store. But this is not enough to explain the problem. Could some one give some suggestions? Thanks in advance. -- Best Wishes Wang Yeqing *********************************************************** Intelligent Grouping Research and Development Institute Amoi Electronics Co., Ltd Tel: 86-592-6516777-6523 *********************************************************** Tag: Web page for IE 6.0 Tag: 63271
  - 7
    - Platform Builder 5.0 Documentation (Help) is useless!! Use msnd.microsoft.com for updated documenation. The documentation that comes with PB 5.0 is outdated! After struggling with registry and other settings as described in the mentioned documentation (Help file), and searching on the internet, I found the PB documentation is based on CE 4.2 and NOT suitable for 5.0. The documentation on msdn.microsoft.com is of a newer version with many corrections. example: help://MS.WindowsCE.500/wcedata5/html/wce50oriStorageManagerRegistrySettings.htm while http://msdn.microsoft.com/library/default.asp?url=/library/en-us/wcedata5/html/wce50oristoragemanagerregistrysettings.asp mentions the MountFlags registry settings are deprecated in WinCE 5.0 Microsoft, Please don't sell us products with inaccurate documentation! Kind regards, Arthur Kater Tag: Web page for IE 6.0 Tag: 63267
  - 8
    - How can I make my CE device to a suspend state HI All, How can I turn my CE device to a suspend state.When I suspend the device from StartMenu, it shuts down. Thanks Johns Tag: Web page for IE 6.0 Tag: 63265
  - 9
    - USB OHCI doesn't work Hi, all I have add a USB host driver in my paltform, after build I find that the ohci2.dll is in the release directory and it is also in the ce.bib. But after I download the NK.bin to my platform board, I haven't found the ohci2.dll in the all module and it seems it doesn't load to the board. The USB host doesn't work. After I press any key of the USB keyboard to the board, there is a continuous noise of "kaka". What's the matter with my operation? best regards Tag: Web page for IE 6.0 Tag: 63260
  - 10
    - PAN ad-hoc connection support under Wce4.2 ? Is it possible to install PAN ad-hoc connection support for bluetooth under WinCe4.2? I would like to establish a winsock connection between the WinCe4.2 and a desktop. How can I implement or configure this functionality? H. Edgar. Tag: Web page for IE 6.0 Tag: 63257
  - 11
    - Verification of code in RAM I have written an application that verifies the validity of the CE image executing in RAM. It does this by stepping through the nk.bin stored in compact flash and saving the start address, length and checksum for each record that gets loaded into RAM. Periodically (every 30 seconds), the app checksums each record in RAM and compares the calculated checksum and stored checksum for the record. If the checksums don't agree, then a corruption has occurred and the app reboots the system. This app was originally written and tested with CE 4.2 and never indicated a checksum discrepancy. Recently I rebuilt the app for CE 5.0 and am now finding that it always finds a checksum difference in one and only one record - the third record. In addition, the calculated checksum is always 12 more than the stored checksum (eg. Calculated: 0x0143ee21 Checksum Record: 0x0143ee15). Given that this is extremely reproducible and began after going from CE 4.2 to CE 5.0, it seems that CE 5.0 may be modifying the RAM used by this record. Can anyone help me out here? Thanks Tag: Web page for IE 6.0 Tag: 63252
  - 12
    - NdisDevicePowerState Hi All, I set OID_PNP_SET_POWER through the following code from my application. pSetOid->Oid = OID_PNP_SET_POWER ; bRet = DeviceIoControl(g_hAdapter, IOCTL_NDISUIO_SET_OID_VALUE, pSetOid, sizeof(NDISUIO_SET_OID),0, 1024, &dwReturnedBytes, NULL); when i go thru th debug message, i find that the miniport driver gets a garbage device power state(pls see below). BUt i print the current power state in my application and it gives the correct device power state. I am using NDISUIO to talk to my miniport driver. +MiniportSetInformation[003b0030h] Oid[fd010101h]... 0x876bfc5c: [VT3065] PowerState change [D0]=>[D-858993661] 0x876bfc5c: [VT3065] PwrEvnt Status = [00]. 0x876bfc5c: [VT3065] PwrEvnt Enable = [00]. Thanks, Maju Tag: Web page for IE 6.0 Tag: 63251
  - 13
    - pcmcia question platform is xscale 272 based on mainstone 2. i want to know, how do windows ce 5.0 trigger card isr? i thought it is ThreadRun scan status, CPcmciaCardSocket->SocketEventHandle CallBackToCardService m_pCallBackToCardService but my isr just don't get fired. can anyone help me? Tag: Web page for IE 6.0 Tag: 63250
  - 14
    - NDIS_PNP_WAKE_UP_MAGIC_PACKET am trying to implement WAKE up On LAN feature on VT3065. I want to know whether NDIS_PNP_WAKE_UP_MAGIC_PACKET macro indicates the reception of a magic packet. ie. whether NDIS_PNP_WAKE_UP_MAGIC_PACKET is set only after the reception of a magic packet. Or Is there any way that I could recognize a magic packet?? Pls help me out!!!! Thanks, Johns Tag: Web page for IE 6.0 Tag: 63249
  - 15
    - Persistent object store, WinCE 5.0 System: X86, IDE HDD. System does not have battery backup. How do I 'save and restore' files that are put in the \Windows folder (or any other folder not on the HDD) ? Kind Regards, Arthur Kater Tag: Web page for IE 6.0 Tag: 63248
  - 16
    - how install a program into wince Hi,all how can I install a application with a dll to WINCE? actually, I want to run a application which need a dll in WINCE. for this application I can copy it manually to release directory then run it in Target-->run programs. but how can I add the dll file to WINCE? I have trid to add this dll in platform.bib and then make image and download NK.bin to platform board. but failed. best regards DongFang Tian Tag: Web page for IE 6.0 Tag: 63247
  - 17
    - hai Jun Meng hai, is evaluation version of 5.0 contains the code of RTL8139,which is a working model,pls give an early response so that we can commit to our client..... Thanking u Tag: Web page for IE 6.0 Tag: 63244
  - 18
    - ndislib.lib link error I'm trying to build a WinCE 4.2 "Industrial Controller" on the included standard Samsung BSP and running into the below build error. I haven't done anything between running the platform creation wizard and starting a debug build. What clue do I need? //Jesse Off Microsoft (R) Incremental Linker Version 6.24.3064 Copyright (C) Microsoft Corporation. All rights reserved. -nodefaultlib -entry:DllEntry -debug -debugtype:cv -incremental:no -pdb:C:\WINCE420\PUBLIC\smsng\WINCE420\smdk2410\cesysgen\oak\target\ARMV4I\debug\ndis.pdb -map:C:\WINCE420\PUBLIC\smsng\WINCE420\smdk2410\cesysgen\oak\target\ARMV4I\debug\ndis.map -savebaserelocations:C:\WINCE420\PUBLIC\smsng\WINCE420\smdk2410\cesysgen\oak\target\ARMV4I\debug\ndis.rel -MERGE:.rdata=.text -merge:.astart=.text -align:4096 -ignore:4001,4070,4078,4086,4089,4096,4099,4108 /STACK:65536,4096 -subsystem:windowsce,4.20 /base:0x10000000 C:\WINCE420\public\common\oak\lib\ARMV4I\debug\ndislib.lib C:\WINCE420\public\common\sdk\lib\ARMV4I\debug\ntcompat.lib C:\WINCE420\PUBLIC\smsng\WINCE420\smdk2410\cesysgen\oak\lib\ARMV4I\debug\ceddk.lib C:\WINCE420\PUBLIC\smsng\WINCE420\smdk2410\cesysgen\sdk\lib\ARMV4I\debug\coredll.lib C:\WINCE420\public\common\sdk\lib\ARMV4I\debug\corelibc.lib C:\WINCE420\PUBLIC\smsng\WINCE420\smdk2410\cesysgen\sdk\lib\ARMV4I\debug\ndis.exp ndislib.lib(lookasid.obj) : error LNK2019: unresolved external symbol CTEAllocMem referenced in function MyLocalAlloc ndislib.lib(lookasid.obj) : error LNK2019: unresolved external symbol CTEFreeMem referenced in function MyLocalFree ndislib.lib(timerm.obj) : error LNK2019: unresolved external symbol SysintrNetworkInterruptMask referenced in function ndisSyncWithInterrupt ndislib.lib(timerm.obj) : error LNK2019: unresolved external symbol SysintrNetworkInterruptDone referenced in function ndisMIsr C:\WINCE420\PUBLIC\smsng\WINCE420\smdk2410\cesysgen\oak\target\ARMV4I\debug\ndis.dll : fatal error LNK1120: 4 unresolved externals NMAKE : fatal error U1077: 'link' : return code '0x460' Stop. NMAKE : fatal error U1077: 'C:\WINCE420\sdk\bin\i386\nmake.exe' : return code '0x2' Stop. Tag: Web page for IE 6.0 Tag: 63236
  - 19
    - Virtual Addressing & the SA1111 Using a PXA255 w/ SA1111 companion chip. Running Intels "diagnositic manager" After enabling the SDRAMs and before setting up virtual memory, I run a simple loop that writes & reads a single SDRAM location. This works correctly. On the scope I see write & reads to the SDRAM going quickly with no unexpected access to anything else going on. After setting up virtual memory and "going virtual" I have the same simple code except I write to the equivalent virtual memory location in SDRAM. I see the write & then read to the SDRAM just as before. However, after the SDRAM access comes 3 unexpected write/reads to the SA1111. Can anyone give me a clue as to what is going on here? At first I thought it was interrupts - however, the only interrupt enabled is 'match reg 1' which is used by the delay macro. Any help is greatly appreciated! -Jeff Tag: Web page for IE 6.0 Tag: 63234
  - 20
    - Connection manager connection closed by activesync Hi, I Successfylly established a connection(work) using the connection manager APIs in IPAQ5550.The platform is a pocket pc 2003 for mobile. But when i try to establish activesync connection, the connection i prevously established gets closed. Why this happens. I think this problem is related with PPC2003 since i have no problem with PPC2002. TIA, Gomas Tag: Web page for IE 6.0 Tag: 63231
  - 21
    - Cardbus bridge on PCI Card Hi , Anyone knows about a PCI card that contains the TI 1520 Cardbus bridge or Ricoh R5C476 Cardbus bridge ( I assume they are both supported in Windows CE 5.0 ) ? Thanks in advance Tag: Web page for IE 6.0 Tag: 63230
  - 22
    - setting time/date for headless device Is NTP available for WinCE 5.0? I would like my device to run an NTP client process periodically (once a day?) and set the system time & date from NTP servers located on the Internet. baronics. Tag: Web page for IE 6.0 Tag: 63227
  - 23
    - LastWriteDate modified when using CE 4.2 File Server Hi, This is a second post. One of my CEPC applications uses two CEPC systems linked together via Ethernet. CEPC#1 is running the SMB file server and CEPC#2 accesses files on CEPC#1 through the file server. If files are copied from CEPC#2 to CEPC#1 via this link, the LastWriteDate for the copied files is changed to the date/time that the copy occured. If I use a WinXP system to link to CEPC#1 and copy files that way, the LastWriteDate remains the same as it was on the XP system, which is the behavior I would expect. The LastWriteDate is also modified if I copy files programmatically across the link between CEPC#2 and CEPC#1. Is this a bug? Thanks, Jim Frazer Tag: Web page for IE 6.0 Tag: 63223
  - 24
    - ATAPI dirver not support FORMAT Store IOCTL? Hi all: I find that the ATAPI driver code do not support the DISK_IOCTL_FORMAT_MEDIA code,is it right? So if I use hard disk in my platform(ce5.0),I must format the hard disk first by PC ? CDisk::MainIoctl() ------------------------ case DISK_IOCTL_FORMAT_MEDIA: case IOCTL_DISK_FORMAT_MEDIA: dwError = ERROR_SUCCESS; break;; Tag: Web page for IE 6.0 Tag: 63220
  - 25
    - Problem at USB OHCI SGksYWxsDQogICBJIHdhbnQgdG8gZHJpdmUgYW4gVVNCIE1PVVNFLCBidXQgaGF2ZSBhIHByb2Js ZW0gaGVyZS4gDQogICBXaGVuIGxvYWRpbmcgbXMyX29oY2kuZGxsLCBhdCB0aGUgZnVjdGlvbiBT T2hjZFBkZDo6SW5pdGlhbGl6ZU9IQ0ksIGFmdGVyIEdldElTUkluZm8oJmRpaSksIGJ1dCBib3Ro IHRoZSBwYXJhbWV0ZXJzIGRpaS5zeklzckRsbFswXSBhbmQgZGlpLnN6SXNySGFuZGxlclswXSBl cXVhbCB0byBaRVJPLiBTbyB0aGUgZmxvdyBkb2Vzbid0IGdldCBpbiB0aGUgaWYtc3RydWN0IHdo aWNoIGluc3RhbGwgSVNSIGhhbmRsZXIuDQogICBXaGVyZSBpcyB0aGUgSVNUIGZ1Y3Rpb24gaW4g T0hDST8gSSBoYXZlbid0IGZvdW5kIGl0IHlldC4gV2hlbiBVU0IgTU9VU0UgYXR0YWNoLCB3aWxs IGl0IGdlbmVyYXRlIGFuIGludGVycnVwdCwgYW5kIGdldCBpbnRvIHRoZSBJU1Q/DQogICBXaGVy ZSBHZXRJU1JJbmZvKCZkaWkpIGdldCB0aGUgdmFsdWVzIG9mIGRpaSBmcm9tPw0KICAgV2hpY2gg dmFsdWUgc2hvdWxkIEkgY29uZmlnIHRvIGRpaS5zeklzckRsbFswXSBhbmQgZGlpLnN6SXNySGFu ZGxlclswXSA/DQogICANCg0KDQotLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0t LS0tLS0tLS0tLS0tLS0tLS0tLSAgICAgDQpKLldhbHplcg0KSW50ZWxsaWdlbnQgR3JvdXBpbmcg UmVzZWFyY2ggYW5kIERldmVsb3BtZW50IEluc3RpdHV0ZSAgICAgICAgICAgICAgICAgICAgICAg ICAgICAgICAgICAgICAgICANCkFtb2kgRWxlY3Ryb25pY3MgQ28uLEx0ZC4NCndhbmd6QGFtb2ku Y29tLmNuDQpURUw6Kzg2LjU5Mi42NTEuNjc3NyBleHQuNjUxNQ== Tag: Web page for IE 6.0 Tag: 63218

In IE 6.0 for WinCE 4.2 or 5.0 i can't view polish character.

The web site is www.interia.pl. This homepage's encoding
is iso-8859-2 <central European (ISO)>. But the ie6.0 displays
this page with central European(winodws).
The character 'Â¶' is displayed. The correct charactor should be 'Å?'.

Another problem which i find www.msinfo.pl is that i can't view one
web page.

Could you tell me any solutions? Thanks!!

Top