How to output NTSC or PAL comopsite signal on GEODE SC1200 ?

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - ActiveSync through USB in WinCE 5.0 ?? Hi, I use Samsung S3C2410 CPU. I am trying to use ActiveSync over USB in WinCE 5.0, but it failed. I think I should use the "serial client" instead of "RNDIS client". Right ? Should I set DefaultClientDriver to "serial client" or "RNDIS client" if I want to use ActiveSync? When I use RNDIS client, PC pops up a dialog to ask me to install the driver. However, When I use serial client, PC does not pop up the dialog to ask me to install the driver. The following is my registry setting for serial client. Thanks. Yu. ---------------------------------------------------------------------------- ------------ common.reg ; @CESYSGEN IF CE_MODULES_SERIALUSBFN [HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers] "DefaultClientDriver"=- ; erase previous default [HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers] "DefaultClientDriver"="Serial_Class" [HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers\Serial_Class] "Dll"="serialusbfn.dll" "InterfaceSubClass"=dword:ff "InterfaceProtocol"=dword:ff "DeviceName"="USBFNS1:" "Tsp"="Unimodem.dll" "Prefix"="COM" "DeviceArrayIndex"=dword:0 "DeviceType"=dword:0 "IClass"="{CC5195AC-BA49-48a0-BE17-DF6D1B0173DD}" ; idVendor must be changed. 045E belongs to Microsoft and is only to be used for ; prototype devices in your labs. Visit http://www.usb.org to obtain a vendor id. "idVendor"=dword:045E "Manufacturer"="Generic Manufacturer (PROTOTYPE--Remember to change idVendor)" "idProduct"=dword:00ce "Product"="Generic Serial (PROTOTYPE--Remember to change idVendor)" "bcdDevice"=dword:0 "Index"=dword:8 "FriendlyName"="SC2410 USB Cable:" [HKEY_LOCAL_MACHINE\Comm\USB\Linkage] "Bind"=multi_sz:"USBFNSER1" [HKEY_LOCAL_MACHINE\Comm\USBFNSER] "DisplayName"="USB Driver" "Group"="Serial" "ImagePath"="serialusbfn.dll" [HKEY_LOCAL_MACHINE\Comm\USBFNSER\Linkage] "Route"=multi_sz:"USBFNSER1" [HKEY_LOCAL_MACHINE\Comm\USBFNSER1\Parms] ; Intentionally left blank as a placeholder. ; @CESYSGEN ENDIF CE_MODULES_SERIALUSBFN ---------------------------------------------------------------------------- ------------ platform.reg [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SC2410USBFN] "Dll"="sc2410usbfn.dll" "Prefix"="UFN" "Priority256"=dword:64 "IoBase"=dword:B1200000 "IoLen"=dword:1000 ; Use one page "Irq"=dword:19 "BusIoctl"=dword:2a0048 "IClass"=multi_sz:"{E2BDC372-598F-4619-BC50-54B3F7848D35}=%b","{6F40791D-300 E-44E4-BC38-E0E63CA8375C}=%b" Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60925
  - 2
    - CE4.2 - System crash on Event/Mutex creation Hi everyone, Problem description > We use windows Ce 4.2 on a PXA255 platform with 64MByte SDRAM and 64MB Flash. > We have an application that creates named events or mutexes without releasing/closing them. > After a while the system totally crashes when the 65536th handle is being created. > The crash = system hangs without generating exceptions (Nothing appears on the debug output to indicate a crash or exception) > Here is a code sample that easily makes the system crash!!! (Crash ocurs each time when counter reaches exactly 65536) DWORD dwCounter = 0; HANDLE hEvent; while(TRUE) { RETAILMSG(1,(TEXT("Creating event %d\r\n"),dwCounter++)); hEvent = CreateEvent(NULL,FALSE,FALSE,TEXT("MY_EVENT_TEST")); if(hEvent != NULL) { SetEvent(hEvent); } else RETAILMSG(1,(TEXT("Failed to createEvent - error = %d\r\n"),GetLastError())); } Questions : 1) Why does this "CreateEvent" or "CreateMutex" function not return an errorcode or an exception? (i.e. ERROR_NOT_ENOUGH_MEMORY) 2) Why does the kernel not prevent such a crash? 3) Are there QFE packs available that solve this problem? 4) Can we change something in the kernel/hal to intercept or to prevent this crash? 5) Can this problem be generated by an unexpected WORD (counter) overflow in the kernel? (65536 = 0x10000) Thanks for all your support, Peter. Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60921
  - 3
    - Very slow system dialogs Hello, I'm using Windows CE 5.0 with a SH4 (SH7760) processor. We are using the internal LCD controller of the SH7760. So we don't have a separate hardware acceleration. This mean the Windows CE uses the emulation libraries which are delivered with the Platform Builder. The system works fine but some system dialogs such as the system applet of the control panel the dialog are shown very slow. Example. I open the system applet in the control panel. If I change from the general tab to the device name tab then the edit controls with the device name and the description are shown very fast. Then there is a delay time from about 1 second. Then the static text information are shown. Then there is a delay time again before the lines are shown on the sreen. Does anyone see this problem too ? Have anyone a suggestion what causes this problem ? Thank you for your answers in advance. Regards, Ruediger Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60919
  - 4
    - Problem about Waveform Audio Functions? Hi, Now I am developing a record&play program. I have read the sample codes in wince.net 4.2. I can use sample codes wavrec to record a wave file and I can use media player to play it. But I can't use wavplay playing it. Does the media player not use the Waveform Audio Functions playing it ? The wave file information is "wavrec.wav" S16 44100Hz 1764000 bytes 10000 ms. It was recorded by wavrec . Help! Fred Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60916
  - 5
    - Adding drivers from third party device drivers to OS Design View Hi all, This querry is pertaining to addition of drivers from Third Party device drivers in catalog to OS Design View. I do not see all the device drivers which I add from Third Pary to OS Design.. Say for example, if third party has 3 drivers namely PCIBUS, AUDIO and USB. Now it so happens that if I add PCIBUS , the same is shown in OS Design under the BSP we have created. If I add USB , the same replaces PCIBUS. Furthermore, addition of AUDIO driver replaces USB. Eventually I see only one driver inspite of adding all the drivers from device drivers under Third Party. Any suggestion on this would be appreciated. Cheers Hans Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60909
  - 6
    - Why SD/MMC is read-only in WinCE 5.0 ? Hi, I put the SD/MMC driver of WinCE 4.2 to WinCE 5.0. It works after modifying some address issues, but it is read-only. Why ? How can I set the read/write attribute of SD/MMC in WinCE 5.0 ? Thanks. Yu Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60908
  - 7
    - IP phone & USB keyboard Hi, Is there any conflict between USB keyboard and IP phone configuration in CE 4.2? I build a IP Phone Advanced configuration on a Cirrus EP9315 platform. But I can't enter any password at the PIN screen. I can used the USB mouse to move the cursor around. So the USB host and HID must be OK. And at KITL, I can see the kbdhid.dll loaded when I plug in the keyboard. Also, I tested the USB keyboard and the keyboard driver in other configurations and they worked fine. I don't know what have I done wrong then. Thanks for your help! Derek Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60907
  - 8
    - Installing Device-Compatible Programs with ACTIVESYNC Finally I've made my WCE Image connect with my Workstation with ACTIVESYNC. It was tricky but I got it. Now I'm trying to synchronize my device with desktop PC like a final user would do. I tried to install Pocket PC Acrobat Reader with MS ActiveSync, however after the "retrieving application data from device" it says THERE ARE NO DEVICE-COMPATIBLE PROGRAMS AVAILABLE. Why it says Acrobat isn't device-compatible? Is there some lack of registry configuration? Or the program isn't compatible with my hardware. My machine consist of: Embedded PC x86 - Via Eden 700Mhz I've included in my Image TRANSPORT / ACTIVE SYNC APPLICATIONS - END USER / ACTIVE SYNC / FILE SYNC Is there some more configuration to do? Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60906
  - 9
    - WinCE 5.0 Atapi DMA memory leak Has anyone seen a memory leak using the promise atapi driver that comes with CE 5.0? When I enable DMA transfer a memory leak occurs. - Brad Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60903
  - 10
    - WinCE 5.0 Atapi DMA memory leak Has anyone seen a memory leak using the promise atapi driver that comes with CE 5.0? When I enable DMA transfer a memory leak occurs. - Brad Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60902
  - 11
    - MTU size change... I need to change the MTU size on CE v3.0 as well as CE v4.2. I've been looking thru the docs and can't seem to find anywhere that the MTU size can be set for a given adapter or the IP stack itself. I was hoping that simple registry change might do the trick, but have't been able to find it in the existing docs. Can anyone point me in the right direction, or perhaps even know if/what to change? ----------- Joe Cossette Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60900
  - 12
    - Where are COMMON DLL's placed? Hi All, if i modify code in COMMON directory (i know i shouldnt, but all i did was some RETAILMSG 's ) i have to do deptree build right? it takes about an 30-45 minutes... 2 much now, is there is a way around it? u know like if u modify a driver, all u have to do from command line is to go that driver directory, set wincerel=1 and then build, and then makeimage and ur changed are there... where do the DLL/.OBJ files from the COMMON area placed? can i just compile the sample driver that i change and then copy it to my platform? thanks Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60897
  - 13
    - Preventing NDIS wrapper from calling InterruptEnable/InterruptDisable Does anybody know how to prevent NDIS wrapper from calling InterruptDisable/InterruptEnable each time when interrupt occurs. Is it any way to do it? Thanks Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60883
  - 14
    - [Found !] Perf. issue with SMDK2410 AND 5.0 , but ... As I mentionned in a previous thread, I was wondering why the performance using CE 5.0 on SMDK2410 eval board was almost two times slower than 4.2 . I finally found a trick to make it work properly . All the basic hardware initialization is done by EBOOT.BIN . Then it jumps to StartUp routine, which does nothing else than launching KernelStart . It appears that the assembler code to make the bus acting in Asynchronous Mode has to be done a second time just before calling KernelStart ! I didn't find any information related to this in the Samsung databook. I've tried to make the switching to this bus mode in a different order in EBOOT, but it change nothing .... So far, my problem is solved, but I'd like to understand the REAL reason for this cheat ??! Yves. Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60882
  - 15
    - issue with ATAPI driver in 5.0 hi guys, i am trying to migrate the atapi driver from 4.2 to 5.0. While the code works fine in 4.2, in 5.0 for hard disks from samsung, Identify command is failing. Though the same hard disk works fine in 4.2, and there 's this seagate hard disk which works fine in both 4.2 and 5.0. further, the same samsung disk works when i try to configure as slave (either single, or along with another disk as master). If i try with the 2 samsung HDs configured as master and slave, then again, the master does not respond to identify device, but the slave does. anybody has observed this kind of behaviour ? or anybody knows what could be the possbile reason ? i have attached the message dump with ATAPI zones enabled (with just the samsung HD configured as the master and no slave, no secondary port. ). -- cheers, Joseph Garibaldi. B'lore, India. *********************************************DEBUG DUMP**************************************************** ATAPI DLL_PROCESS_ATTACH Atapi!DumpRegKey> Drivers\Active\4294967283 Hnd = 00031BE0 Name = IDE1: Key = Drivers\BuiltIn\PCI\Instance\GenericIDE1 BusParent = 00031F60 InterfaceType = 00000005 BusName = PCI_0_17_0 Atapi!DumpRegKey> Drivers\BuiltIn\PCI\Instance\GenericIDE1 SysIntr = 00000011 Irq = 00000024 IoLen : 8 4 8 4 10 10 IoBase : 160000b0 160000b8 170 <**SECONDARY PORT**IGNORE**> 374 <**SECONDARY PORT**IGNORE**> 16000080 16000090 FunctionNumber = 00000000 DeviceNumber = 00000011 BusNumber = 00000000 InterfaceType = 00000005 SubSystemID = 00000000 SubVendorID = 00000000 RevisionID = 00000002 ProgIF = 00000085 SpawnFunction = CreatePCIHD RegisterStride = 00000001 StatusPollCyclePause = 00000005 StatusPollsPerCycle = 00000020 StatusPollCycles = 00000100 SoftResetTimeout = 00000003 DMAAlignment = 00000004 Legacy = 00000000 ConfigEntry = GenericConfig DeviceID = 0000010f VendorId = 0000110d SubClass = 00000001 Class = 00000001 Order = 00000002 Dll = atapi.dll Prefix = IDE IClass : {CDDC3621-3512-4b3f-BB6F-B4DD5E061795} InstanceIndex = 00000001 ATAPI: AtaGetRegistryValue(Legacy) Value(0) hKey: 91f50 ATAPI: AtaGetRegistryValue(Irq) Value(24) hKey: 91f50 ATAPI: AtaGetRegistryValue(SysIntr) Value(11) hKey: 91f50 ATAPI: AtaGetRegistryValue(VendorID) Value(110d) hKey: 91f50 ATAPI: AtaGetRegistryValue(DMAAlignment) Value(4) hKey: 91f50 ATAPI: AtaGetRegistryValue(SoftResetTimeout) Value(3) hKey: 91f50 ATAPI: AtaGetRegistryValue(StatusPollCycles) Value(100) hKey: 91f50 ATAPI: AtaGetRegistryValue(StatusPollsPerCycle) Value(20) hKey: 91f50 ATAPI: AtaGetRegistryValue(StatusPollCyclePause) Value(5) hKey: 91f50 ATAPI: AtaGetRegistryString(SpawnFunction) Value(CreatePCIHD) hKey: 91f50 ATAConfig: RegQueryValueEx(IsrDll) failed -returned 2 Error=00000057 ATAConfig: RegQueryValueEx(IsrHandler) failed -returned 2 Error=00000057 ATAConfig: RegQueryValueEx(DeviceControlOffset) failed -returned 2 Error=00000057 ATAConfig: RegQueryValueEx(AlternateStatusOffset) failed -returned 2 Error=00000057 ATAPI: AtaGetRegistryValue(RegisterStride) Value(1) hKey: 91f50 Atapi!IDE_Init> Start of IDE/ATA device enumeration ATAPI: AtaGetRegistryValue(DeviceId) Value(0) hKey: 91fc0 ATAPI: AtaGetRegistryValue(InterruptDriven) Value(1) hKey: 91fc0 ATAPI: AtaGetRegistryValue(DMA) Value(0) hKey: 91fc0 ATAPI: AtaGetRegistryValue(DoubleBufferSize) Value(10000) hKey: 91fc0 ATAPI: AtaGetRegistryValue(DrqDataBlockSize) Value(200) hKey: 91fc0 ATAPI: AtaGetRegistryValue(WriteCache) Value(1) hKey: 91fc0 ATAPI: AtaGetRegistryValue(LookAhead) Value(1) hKey: 91fc0 ATAPI: AtaGetRegistryValue(TransferMode) Value(ff) hKey: 91fc0 ATAPI: AtaSetRegistryValue(DeviceId) Value(0) hKey: 91fc0 ATAPI: AtaSetRegistryValue(Port) Value(33120) hKey: 91fc0 Atapi!IDE_Init> Enumerated IDE/ATA device Drivers\BuiltIn\PCI\Instance\GenericIDE1\Device0 Atapi!IDE_Init> End of IDE/ATA device enumeration Atapi!IDE_Init> Activating IDE/ATA device Drivers\BuiltIn\PCI\Instance\GenericIDE1\Device0 DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\PCI\Instance\GenericIDE1\Device0\BusPrefix) returned 2 Atapi!DumpRegKey> Drivers\Active\4294967284 Hnd = 000335C0 Name = DSK1: Key = Drivers\BuiltIn\PCI\Instance\GenericIDE1\Device0 Atapi!DumpRegKey> Drivers\BuiltIn\PCI\Instance\GenericIDE1\Device0 Port = 00033120 TransferMode = 000000FF DeviceId = 00000000 LookAhead = 00000001 WriteCache = 00000001 DrqDataBlockSize = 00000200 DoubleBufferSize = 00010000 DMA = 00000000 InterruptDriven = 00000001 Dll = atapi.dll Prefix = DSK IClass : {A4E7EDDA-E575-4252-9D6B-4195D48BB865} ATAPI: AtaGetRegistryValue(Port) Value(33120) hKey: 922d0 ATAPI: AtaGetRegistryValue(DeviceId) Value(0) hKey: 922d0 Atapi!CPCIDisk::CPCIDisk> device count(1) Atapi!CDisk::ResetController> Device is ready Atapi!CDisk::IsDevicePresent> Device 0 is present Atapi!CDisk::SendExecuteDeviceDiagnostic> ERROR REG 1 Atapi!CDisk::SendExecuteDeviceDiagnostic> Device 0 passed, Device 1 passed or not present Atapi!CDisk::SendExecuteDeviceDiagnostic> ATA device Atapi!CDisk::Identify> Device failed to respond to IDENTIFY DEVICE and IDENTIFY PACKET DEVICE Atapi!CDisk::InitController> Device did not respond to identify Atapi!CDisk::Init> Failed to initialize device Atapi!CPCIDisk::~CPCIDisk> device count(0) DEVICE!LaunchDevice: Init() failed for device 0x000335c0 Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60880
  - 16
    - Build error in plat.builder Hi all, when im trying to build final image in Plat buil for winCE 5.0, im getting the following error in the middle of the build and it stops to create the NK.exe or NMAKE.exe. error is: BUILD: [00:0000001178:ERRORE] CreateDirectory(\) failed. GetLastError=5 (dec) after this line the build stops for a halt and says, the necessary binaries and executables were not created as... NMAKE : fatal error U1073: don't know how to make 'G:\\public\common\oak\lib\x86\retail\tchmain.lib' Stop. NMAKE : fatal error U1077: 'G:\sdk\bin\i386\nmake.exe' : return code '0x2' Stop. The thing is my winCE 5.0 OS and Plat buil are in one directory and my eMVC++ 4.0 is another drive... could tht hve anything to do with this build error.... could anyone suggest me any suitable soln for this, as i've been scratching my head on this issue for a while... adieu, harry_thomas_5 Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60879
  - 17
    - about *dirs* file Hi all, I want to add my device folder into a existing BSP and I must add it folder link in *dirs* file. but when I opened a sample *dirs* file,I found some instruction like # @CESYSGEN IF CE_MODULES_DISPLAY display \ # @CESYSGEN ENDIF CE_MODULES_DISPLAY It will judge CE_MODULES_DISPLAY,but I could't find the define of it. where I can find it ?? Best regards Tiandf Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60877
  - 18
    - how to componentize or develop a new componet from scratch in the how to componentize or develop a new component from scratch in the plat builder, and what are the procedures to include in the run-timedoes all the dependency of the catalog items mentioned... should be resolved for that ccatalog to work...pls suggest... Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60876
  - 19
    - CE5.0 Project paths Hi All, Using Platform Builder 5.0. I create an empty project in my platform, add the source files etc by adding them throu PB. Source file paths that start with ..\xxx.cpp build OK, but anything further back in the directory tree (..\..\xxx.cpp) throw a "Bad directory prefix error"? Should I be able to include files located more than one folder level back? If so How? Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60875
  - 20
    - Unable to get data from STDIO For testing a keypad driver I have written a test program: void main(HANDLE hInstance, ULONG dwReason, LPVOID lpReserved) { unsigned char fromKeybd = 'A'; while(1) { fromKeybd = getchar(); ERRORMSG( TRUE, ( TEXT( "main: %c.\r\n" ),fromKeybd ) ); } } It is printing debug messages like: Run Programs: s kbdtest 4294790612 PID:54ab8b72 TID:54ab8692 0x94ab8b98: >>> Loading module kbdtest.exe at address 0x0E010000-0x0E014000 Loaded symbols for 'N:\WINCE420\PUBLIC\TNETV1050_DEV1\RELDIR\TNETV1050_MIPSIIDEBUG\KBDTEST.EXE' 4294790615 PID:54ab8b72 TID:54ab8692 0x94ab8b98: Console NOT redirected for process 0x42 4294790766 PID:54ab8b72 TID:54ab8692 0x94ab8b98: ERROR: n:\wince420\platform\tnetv1050\tests\keybdtest\main.cpp line 31: 4294790766 PID:54ab8b72 TID:54ab8692 0x94ab8b98: main: ÿ. 4294790890 PID:54ab8b72 TID:54ab8692 0x94ab8b98: ERROR: n:\wince420\platform\tnetv1050\tests\keybdtest\main.cpp line 31: 4294790890 PID:54ab8b72 TID:54ab8692 0x94ab8b98: main: ÿ. Is getchar not getting the character from the keypad? How to set the 'STDIN' to the keypad? Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60870
  - 21
    - WinCe 5.0 Installation Problem Hi, I have downloaded WINCE 5.0 12o days evaluation version. I am trying to install the same, but during installation i am getting the following error message: ======================================= Error 1606. Could not access network locatio http://download.microsoft.com/download/0/8/0/08000f6b-974b-4384-90d0-26440d9ecbcf/Data1.cab ======================================= Please help me to solve this problem. Regards Hussain Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60867
  - 22
    - [Q]: DEBUGCHK failure in WAVEAPI!wapi_common_Write This is a multi-part message in MIME format. ------=_NextPart_000_0024_01C4DE10.646685A0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi all, Under denug build, when I ran wavrec/capture cetk test, a DEBUGCHK failed [reason being = unknown] just before audio capture starts, in WAVEAPI!wapi_common_Write = api. The below debug message is output: 183889 PID:27e88f42 TID:7d58f82 0x87d18d80: Unknown: DEBUGCHK failed in = file c:\macallan\private\winceos\drivers\waveapi\wave\wcommon.cpp at = line 1838=20 As this api is hidden, it is difficult to identify the reason. Can = anybody [or atleast MS] say the possible reasons for the failure. regards sajid ------=_NextPart_000_0024_01C4DE10.646685A0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.2800.1479" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff> <DIV><FONT size=3D2>Hi all,</FONT></DIV> <DIV><FONT size=3D2></FONT> </DIV> <DIV><FONT size=3D2>Under denug build,</FONT></DIV> <DIV><FONT size=3D2>when I ran wavrec/capture cetk test, a DEBUGCHK = failed=20 [reason being unknown] just before audio capture starts, in=20 WAVEAPI!wapi_common_Write api. The below debug message is = output:</FONT></DIV> <DIV><FONT size=3D2>183889 PID:27e88f42 TID:7d58f82 0x87d18d80: Unknown: = DEBUGCHK=20 failed in file = c:\macallan\private\winceos\drivers\waveapi\wave\wcommon.cpp at=20 line 1838 </FONT></DIV> <DIV><FONT size=3D2></FONT> </DIV> <DIV><FONT size=3D2>As this api is hidden, it is difficult to identify = the reason.=20 Can anybody [or atleast MS] say the possible reasons for the=20 failure.</FONT></DIV> <DIV><FONT size=3D2></FONT> </DIV> <DIV><FONT size=3D2>regards</FONT></DIV> <DIV><FONT size=3D2>sajid</FONT></DIV></BODY></HTML> ------=_NextPart_000_0024_01C4DE10.646685A0-- Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60866
  - 23
    - Gray scale LCD driver for winCE.net 4.2 (PXA255,lubbock) I want to add a monochorme LCD (4 data pins,320*240)to lubbock platform.I modified the registy key "Bpp=8" in "HKEY_LOCAL_MACHINE\Drivers\Display\INTEL",and did something with the PXA255 LCD controller regiters.But the LCD display abnormaly. It seems that reverse gray. I guess there is something wrong with the color palette.In the palette.h file,winCE has defined a 256 color palette,I don`t konw how to modified it to fit my monochrome LCD? Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60865
  - 24
    - [Q]: Clean build in WinCE 5.0 This is a multi-part message in MIME format. ------=_NextPart_000_0008_01C4DE09.218F5510 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi all, Is there any way to clean[only] a platform in WinCE 5.0 as found in = WinCE 4.2 ? regards sajid ------=_NextPart_000_0008_01C4DE09.218F5510 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.2800.1479" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff> <DIV><FONT size=3D2>Hi all,</FONT></DIV> <DIV><FONT size=3D2></FONT> </DIV> <DIV><FONT size=3D2>Is there any way to clean[only] a platform in = WinCE 5.0=20 as found in WinCE 4.2 ?</FONT></DIV> <DIV><FONT size=3D2></FONT> </DIV> <DIV><FONT size=3D2>regards</FONT></DIV> <DIV><FONT size=3D2>sajid</FONT></DIV></BODY></HTML> ------=_NextPart_000_0008_01C4DE09.218F5510-- Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60863
  - 25
    - WINCE installation problem Bruce, As per your suggestion i have downloaded WINCE 4.2 and I am trying to install the same, but during installation i am getting the same error message which i got during the installation of WINCE 5.0: ======================================= Error 1606. Could not access network location http://download.microsoft.com/download/0/8/0/08000 f6b-974b-4384-90d0-26440d9ecbcf/Data1.cab ======================================= Please help me to solve this problem. Regards Hussain Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60859
- Next
  - 1
    - Please Help - Serial KITL - shows OEMInit() messages only Hi, I modified the CEPC code to fit my Xscale for Serial KITL. Am using Active Serial KITL. I am using BTUART for serial debug messages and FFUART for my KITL. then, in my serial receive messages, i am not hanging infinetly, waiting for some time and coming out. so this will also not affect i belive. Please help me out. My Platform Builder debug window Shows Kernel debugger is waiting to connect with target. 0 PID:0 TID:0 Calling fron OEM Init after Debug Ether ....Peter After the above message nothing is omcing ...but in my serial debug window(hyperterminal), i am able to see that SerialSendRaw() function is called and the kernel is alive, not hanging anywhere. Thanks in advance, Peter Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60852
  - 2
    - [Q]: CallBack Mechanism This is a multi-part message in MIME format. ------=_NextPart_000_0008_01C4DDEC.E3EE6B90 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi all, Can anyone detail or provide a link about "Callback Mechanism" in WinCE = 5.0. There are around 5 callback types i know: CALLBACK_NULL CALLBACK_EVENT CALLBACK_THREAD CALLBACK_FUNCTION CALLBACK_WINDOW Now, I would like to know how are these callbacks used and where does it = work well [especially the last 3]. regards sajid ------=_NextPart_000_0008_01C4DDEC.E3EE6B90 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.2800.1479" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff> <DIV><FONT size=3D2>Hi all,</FONT></DIV> <DIV><FONT size=3D2></FONT> </DIV> <DIV><FONT size=3D2>Can anyone detail or provide a link about "Callback = Mechanism"=20 in WinCE 5.0.</FONT></DIV> <DIV><FONT size=3D2></FONT> </DIV> <DIV><FONT size=3D2>There are around 5 callback types i = know:</FONT></DIV> <DIV><FONT size=3D2>CALLBACK_NULL</FONT></DIV> <DIV><FONT size=3D2>CALLBACK_EVENT</FONT></DIV> <DIV><FONT size=3D2>CALLBACK_THREAD</FONT></DIV> <DIV><FONT size=3D2>CALLBACK_FUNCTION</FONT></DIV> <DIV><FONT size=3D2>CALLBACK_WINDOW</FONT></DIV> <DIV><FONT size=3D2></FONT> </DIV> <DIV><FONT size=3D2>Now, I would like to know how are these callbacks = used and=20 where does it work well [especially the last 3].</FONT></DIV> <DIV><FONT size=3D2></FONT> </DIV> <DIV><FONT size=3D2>regards</FONT></DIV> <DIV><FONT size=3D2>sajid</FONT></DIV></BODY></HTML> ------=_NextPart_000_0008_01C4DDEC.E3EE6B90-- Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60848
  - 3
    - About BusNumber ? Hi all: In my mainboard,which uses PXA270,I connect the HDD(Hard Disk)(Slot0) and CF Card(Slot1) to the PCMCIABus(16-bit),but how can I configurate the "BusNumber"(0/1...) during configurating the DMA ADAPTER struct object,which will be used in function HalAllocateCommonBuffer(). Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60838
  - 4
    - CE 4.2 to 5.0 migration Hi all, I am now migrating CE 4.2 to 5.0 on my Intel PXA263 platform. Do you have such experience to share? The PXA263 BSP works fine in CE4.2, can I use it directly in CE5.0? Thank you. Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60833
  - 5
    - How to access the internal values in drivers when the exported API by driver is called by Application Dear: I implemented the driver and its prefix is "COM", but for some issues I export some API for application. Today I meet a problem that I cannot access the values in the driver, when the API is called by application, but it OK when called by other drivers. Is any body can teach me what machanism I need implement if the APIs are called by Applications? Thanks.... Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60827
  - 6
    - How to update my WinCE HELP Document ? Hi,All There are several diference between my WinCE 5.0 HELP Documentation and my colleague's. He said when he run HELP first time after installing, it start a update process automatically. But how can I update it manually? Thanks in advance^_^ Walzer Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60826
  - 7
    - CE 5.0 CEDDK.lib tchmdd.lib Hi, Can you give me some hints here? I have problem porting a driver from 4.2 to CE 5.0. The error is related to tchmdd.lib and ceddk.lib. I found that the ceddk.lib is not in the $(_COMMONOAKROOT)\lib\$(_CPUINDPATH) but instead in $(_COMMONSDKROOT)\lib\$(_CPUINDPATH). Also, I can't find the tchmdd.lib anywhere. Are these changed in CE 5.0 or something else is wrong? Many thanks. Derek Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60824
  - 8
    - Enable ActiveSync To Enable serial ActiveSync in my WCE image I've just to add: TRANSPORT / ACTIVE SYNC APPLICATIONS - END USER / ACTIVE SYNC / FILE SYNC I didn't have to include any registry settings, because they were all already there. But I can't quite connect with Desktop. Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60823
  - 9
    - USB for serial device Hello. I am new to USB so please bear with me. I am working on a product based on the Advantech SBC PCM-3350. This is a 300 MHZ Geode based SBC with two serial ports, two USB 1.0 ports, a printer port and some other ports. I am currently using both serial ports for peripherals in our current application. I have been given the requirement to utilize the USB port for another serial device. The serial device is a GPS device that provides position data in a serial stream. I plan to use a RS232 to USB cable and plug this into the USB connector on the board. The manufacturer of the cable does not provide a CE.NET driver. I am using Platform Builder for CE.NET 4.2. I have enabled the USB port. What is the best way to handle this problem? Do I have to develop a stream driver for this or is there support already in CE.NET 4.2 that makes the USB another COM port? Thanks, -- Brian Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60820
  - 10
    - Custom CE Build image Whats the best way to add various files(i.e like .bmp, .xml, text files, etc..) to my build image? Should I modify project.bib file?. Also, how to I specify a final location on the target for these files, like MyDocuments\Myfiles\Etc. Any help appreciated, Greg White Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60807
  - 11
    - PowerPoint file viewer Windows CE 5.0 aberrations/limitations/blah blah... I am testing the PowerPoint file viewer on Windows CE 5.0. I created a simple presentation with a couple of slides with not much on them. I set to advance each slide after a few seconds. I also set the show to run in Kiosk mode and I tested Loop until escape also. The problem I am having is that the slide show does not loop after the last slide. It just sits there with a silly look on it's face. Anyone tried this on CE 5.0? TAI Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60804
  - 12
    - Keyboard Hook question? Hi, I wan´t to know how I can get the pressed key from the lParam, the lParam should contain some "misterius" pointer to a struct that have information about the pressed key. What is this struct, and how can I access it? Here is my code, the keyboard hook is working, I get WM_KEYDOWN when I press any key! /** * Keyboard hook **/ LRESULT CALLBACK KeyLogProc(int code, WPARAM wParam, LPARAM lParam) { switch(wParam){ case WM_KEYDOWN: OutputDebugString(L"Received WM_KEYDOWN !"); break; case WM_KEYUP: OutputDebugString(L"Received WM_KEYUP!"); break; } return CallNextHookEx(CIdleTracker::m_hHkKeyboard, code, wParam, lParam); } /** * Initialize keyboard hook. **/ BOOL CIdleTracker::IdleTrackerInit(HINSTANCE hInst) { BOOL aRetVal = TRUE; m_hHkKeyboard =SetWindowsHookEx(WH_KEYBOARD_LL, KeyLogProc, hInst,0); if(m_hHkKeyboard == NULL) { OutputDebugString(_T("SetWindowsHookEx Failed!")); aRetVal = FALSE; } else return false; } __declspec(dllexport) LRESULT CALLBACK MessageProc ( int nCode, // The hook code WPARAM wParam, // The window message (WM_KEYUP, WM_KEYDOWN, etc.) LPARAM lParam // A pointer to a struct with information about the pressed key ) { return CallNextHookEx(CIdleTracker::m_hHkMessage, nCode, wParam, lParam); } I hope someone can help me, thanks Dani Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60800
  - 13
    - Debugging and testing via USB or serial? I'm currently running CE 4.1 on an SA1110 (ARMv4) platform for a product that is fully developed and on the market. We made the unfortunate design mistake of not having an Ethernet port, but I would really like to be able to run our OS (and application) in debug mode on our device, as well as possibly use the CETK. Does anyone have any suggestions? -Vic Yuschuk Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60794
  - 14
    - FlashFX vs. IPSM vs. FMD opinions needed Given the levels of expertise in this group, I'll preface this with my usual warning that I'm pretty new at Platform Builder ... I'm currently running CE 4.1 on an SA1110 (ARMv4) platform with a J3 StrataFlash. We now use IPSM 3.53 and the WriteRegistryToOEM/ReadRegistryToOEM method of registry persistence. We may migrate to CE 4.2. 1. Does anyone know of any benefits or drawbacks of changing to FlashFX (or FlashFXPro)? We've had problems that may be related to IPSM. - Intermittent registry corruption: possibly due to IPSM since we use the WriteRegistryToOEM / ReadRegistryToOEM functionality. Intel recommends against this for CE 4.x and we have now been told that this functionality was not tested on 4.x. We will be converting to a hive-based registry persistence model to hopefully resolve this. - Possible program loader defect.We had several different intermittent CPU exceptions that were 'resolved' without definitively identifying the causes. The jury is still out on whether the real cause may be the program loader defect that others have reported when working with large, multi-module applications that are loaded into RAM via IPSM at runtime. 2. Given that we currently do no XIP, does anyone know of any drawbacks to instead using the flash block driver supplied with CE 4.2? I have read that Microsoft's driver may not be as tried and true as FlashFX. FlashFXPro also advertises higher performance, due in part to multithreading. It's hard to say how much weight to place on these statements. A demo of FlashFX is available but I believe it only allows evaluation of a 1MB partition, which prevents me from really testing our application on it. Plus, it would take a bit of labor for me to figure out how to replace our current file system in order to do the test. I appreciate you taking the time to read this! -Vic Yuschuk Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60793
  - 15
    - Rogue ip address 169.254.x.x ??? My problem is that after a while (for some reason I am chasing and getting nowhere) my code start sending out some of its udp frames from a rogue address (eg 169.254.196.148) Most frames use its real (dhcp) address (got with GetAdaptersInfo is 171.192.15.81) I am monitoring with ethereal (with all name resolution turned off !) The only place I can find this ip address is in lan90001/parms/tcpip there is a value 'AutoSubnet' which is 169.254.0.0 on my system. AND - I cant get the prob to occur on my debug system ( a pda image) - only a release image ! Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60783
  - 16
    - About CEPC HardDisk registry modification hi,all I am studing how to migrate CEPC HardDisk registry setting to my pxa255 platform. The default CEPC HardDisk registry is as following: [$(PCI_BUS_ROOT)\Template\ALI1453] "Prefix"="IDE" "Dll"="atapi.dll" "Order"=dword:2 "Class"=dword:01 "SubClass"=dword:01 "VendorId"=dword:10B9 "DeviceID"=dword:5229 "ConfigEntry"="GenericConfig" "IClass"=multi_sz:"{CDDC3621-3512-4b3f-BB6F-B4DD5E061795}" [$(PCI_BUS_ROOT)\Template\ALI1453\Device0] "Prefix"="DSK" "Dll"="atapi.dll" "Settings"=dword:B "DeviceId"=dword:0 "Ioctl"=dword:4 "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" ; Uncomment the following lines if you want to enable slave device. ;[$(PCI_BUS_ROOT)\Template\ALI1453\Device1] ; "Prefix"="DSK" ; "Dll"="atapi.dll" ; "Settings"=dword:B ; "DeviceId"=dword:1 ; "Ioctl"=dword:4 ; "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" [$(PCI_BUS_ROOT)\Template\ALI1453\Device2] "Prefix"="DSK" "Dll"="atapi.dll" "Settings"=dword:B "DeviceId"=dword:2 "Ioctl"=dword:4 "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" ; Uncomment the following lines if you want to enable slave device. ;[$(PCI_BUS_ROOT)\Template\ALI1453\Device3] ; "Prefix"="DSK" ; "Dll"="atapi.dll" ; "Settings"=dword:B ; "DeviceId"=dword:3 ; "Ioctl"=dword:4 ; "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" After I studied ATAPI Code in directory of \WinCE420\public\common\oak\drivers\block\atapi, I am try to modify the registry as following: [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\HardDisk] "Prefix"="IDE" "Dll"="atapi.dll" "Order"=dword:2 "Class"=dword:01 "SubClass"=dword:01 "DeviceID"=dword:0571 "VendorID"=dword:1106 "RevisionID"=dword:0006 "FunctionNumber"=dword:00000001 "DeviceNumber"=dword:00000011 "BusNumber"=dword:00000000 "InterfaceType"=dword:00000005 "SubSystemID"=dword:00000571 "SubVendorID"=dword:00001849 "ProgIF"=dword:0000008a "ConfigEntry"="GenericConfig" "InstanceIndex"=dword:00000001 "IoLen"=multi_sz:"8","4","8","4","10" "IoBase"=multi_sz:"1f0","3f4","170","374","a000" "IClass" = multi_sz:"{CDDC3621-3512-4b3f-BB6F-B4DD5E061795}" [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\HardDisk\Device0] "Prefix"="DSK" "Dll"="atapi.dll" "Settings"=dword:B "DeviceId"=dword:0 "Ioctl"=dword:4 "Order"=dword:2 "Object"="CreateGeneric" "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\HardDisk\Device2] "Prefix"="DSK" "Dll"="atapi.dll" "Settings"=dword:B "DeviceId"=dword:2 "Ioctl"=dword:4 "Order"=dword:0 "Object"="CreateGeneric" "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" As result,I discover that only CD-ROM can be found out and displayed by explorer.exe, but Harddisk can be found by ATAPI code, however, Harddisk can not be found by explorer.exe . please, tell me what is wrong with my registry modifition! And, how to set my PXA255 platform registry Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60780
  - 17
    - Sequence of Device drivers loaded.................. Hai Everybody...... Can anybody give me details of The drivers loading procedure immediately after loading the image to the target device....... The order of Drivers loaded into the system ........ and How to customize the driver loading process... thanks everybody in advance Vijji Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60776
  - 18
    - Is static mapping for shared interrupt safe? Hi, All I know loadable ISR is the solution to shared interrupt. But I am curious if static mapping for shared interrupt also workable? What I have done is using OALIntrStaticTranslate() to map 2 SysIntr to the same IRQ. And in OEMInterruptHandler() I return corresponding SysIntr according to the interrupt status register. It seems working for me, but I am not sure if there is any potential problem for doing this, because in this way, kernel can only get IRQ from SysIntr but not the other way, one of the SysIntr will be overwritten in the global IRQ table, isnt it? Thanks a lot Tang Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60774
  - 19
    - Registry Editor for Windows CE There is, it's called redit and it's (on my system) not very stable. The tool is extremely useful though, many thanks to Srinivas Vaithianathan. And thank god I don't have to pronounce his name. See http://www.codeproject.com/ce/redit.asp Btw. I use CE 4.2, but that shouldn't make a difference. Regards, P > Hi all, > > Is there a program like regedit.exe in CE 5.0? > > Thanks Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60773
  - 20
    - Only show mouse cursor when mouse present Hi all, I am working on a PXA255 platform, running CE 4.2. Under normal conditions only a touch screen is used for input. We have a USB OTG controller, I can add support for a USB mouse but I cannot get the right behaviour for the cursor. When SYSGEN_CURSOR is not set, the mouse is unusable for lack of a cursor (duh). When SYSGEN_CURSOR is set, the cursor is shown and the mouse works just the way I want it to. When I unplug the mouse, the cursor will hide but will keep coming back whenever I tap somewhere (not anywhere, but for example in the taskbar). I want the cursor to show up ONLY when a mouse is plugged in. I don't think there is a build variable or registry setting to get this right (if there is, let me know!). So I suppose I will have to look in the source code. I'm sure I can determine when the mouse is plugged in and out, but it would be great if anyone could tell me where I can enable and disable the cursor. I haven't found a solution anywhere, except the suggestion that any application can decide not to show the cursor by handling a certain WM message (if I remember it well). This is not what I want, I want to enable and disable the cursor for the whole system. Thanks in advance, Piet Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60770
  - 21
    - Scripting support in WinCE-5.0 I wanted to know if perl and C++ scripting is supported in WinCE-5.0. Can anyone help me on this? Thx Samung Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60768
  - 22
    - [Q]: Capture This is a multi-part message in MIME format. ------=_NextPart_000_0010_01C4DD24.A23C79D0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi all, This query is related to audio driver. For capture, why does not the software mixer work with its software = buffers ? When I run capture application, down in the audio driver i get to see = only one buffer coming, that too the one passed by application. regards sajid ------=_NextPart_000_0010_01C4DD24.A23C79D0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.2800.1479" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY> <DIV><FONT face=3DVerdana size=3D2>Hi all,</FONT></DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2></FONT><FONT face=3DVerdana = size=3D2>This query is=20 related to audio driver.</FONT></DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2>For capture, why does not the = software mixer work=20 with its software buffers ?</FONT></DIV> <DIV><FONT face=3DVerdana size=3D2>When I run capture application, down = in the audio=20 driver i get to see only one buffer coming, that too the one passed by=20 application.</FONT></DIV> <DIV><FONT face=3DVerdana size=3D2></FONT> </DIV> <DIV><FONT face=3DVerdana size=3D2>regards</FONT></DIV> <DIV><FONT face=3DVerdana size=3D2>sajid</FONT></DIV></BODY></HTML> ------=_NextPart_000_0010_01C4DD24.A23C79D0-- Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60761
  - 23
    - Problem about USB device enumeration... Dear all, Recently, I developed a USB CDC driver for the modem device. When plug in the device, it should be in the enumeration process. After tracing the execution of codes, USBInstallDriver() and USBDeviceAttach() were called by USBD driver. In the execution of USBDeviceAttach(), it called IssueVendorTransfer() and wait for an event without expiration (WaitForSingleObject(pWait->hEvent, INFINITE);). Finally, the device was not installed successfully on the WinCE.NET 4.2. Could you please tell me why? Thanks!! PS: My SDB is XSCALE platform; USB host chip is CYPRESS CY7C67300. Kemin Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60759
  - 24
    - Problem about USB device enumeration... Dear all, I developed a USB CDC driver for the modem device. When plug-in the device, it was in the enumeration process. After tracing the execution of codes, USBInstallDriver() and USBDeviceAttach() were called by USBD. When executing in USBDeviceAttach(), it called IssueVendorTransfer() and waited for an event(WaitForSingleObject(pWait->hEvent, INFINITE)) without expiration. Finally, the device is not installed on the WinCE.NET 4.2. Could someone tell me how to solve it? Thanks!! PS: My SDB is XSCALE platform; USB host chip is CYPRESS CY7c67300. Kemin Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60758
  - 25
    - Intel 82559ER CE.NET Driver with Geode CPU Hello, everyone. I've a big problem with Intel Ethernet CE.NET Driver 82559ER. Could anyone kindly help me this out? Thank you Problem: I've got CE.NET for Intel 82559ER from Intel Website. it contains four files Config.bib, Platform.reg, E100CE.dll, and Readme. I've followed the ReadMe's instruction to write registries and memoy mappings for multi-Lan to Platform.reg and Config.bib in parameter of Platform builder, but my ethernets never work. I've checked ce.bib and reginit.ini, and those two files do have what I've added in, but ethernet still doesn't work at all. Please kindly help. Thank you a lot. Sincerely Jackson Tag: How to output NTSC or PAL comopsite signal on GEODE SC1200 ? Tag: 60757

Now, I am displaying Windows Graphic data on the TFT LCD.
But I want to display on the NTSC or PAL analog LCD.

I am trying to make it as to modify Platform.reg.
but doesn't display anything on analog LCD.

How can I solve this problems ?

OS : WinCE 4.2
CPU : AMD SC1200

Top