USB memory size

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - What is the process of wake up? Hi, After the my device entered sleep state, a wake up source can wake it up. But I don't know where the resume function PmgrResume is called. Does the process of wake is begun from Reset_Handler? Thanks Fred Tag: USB memory size Tag: 53668
  - 2
    - Exporting a custom BSP Hi, I have built a BSP for my custom platform. Now I wish to build a installer file (msi) for the same. This is what I have done. I opened the export wizard. From the catalog, I added my BSP feature. In additional directories, I added the PLATFORM\mybspdir. I build the msi file. Later I tested the msi installation I created. I removed the cec file corresponding to my bsp from the platform builder catalog, and tried installing the msi, I created. I got the following error- " A build method with the following GUID has already been imported: .. Please use a new GUID and reimport the CEC file" Next, I tried installing the msi on another system (this has none of my BSP files). The installation is aborted. No messages are shown, but it just says "CEC file could not be imported". (the version of windows CE in this systems is 4.2 where as in the previous one it is 4.1) Please advice on how to correctly export my BSP. Thank you, Best regards, Mariam. Tag: USB memory size Tag: 53665
  - 3
    - What is the matter?RAM error or driver error? HI, When I use KITL(using VMINI) to transfer a file with size of 1M , an error happened and a error dialog popup. The comment of dialogbox is "First-chance exception in COREDLL.DLL.(0x80000002: Datatype Misalignment)". The error messages in debug window of PB is " 204299 PID:63b7e646 TID:63b7e68e Data Abort: Thread=83a2b7cc Proc=800e9348 'CEMGRC.EXE' 204300 PID:63b7e646 TID:63b7e68e AKY=00000081 PC=03fc14c4 RA=00fea681 BVA=1001a7ed FSR=00000003" When I use usb client through activesync to transfer a file with size of 1M, an error happened.The error message of pb is 173142 PID:c3a1497a TID:392dfe Prefetch Abort: Thread=83921000 Proc=800e9420 'rapisrv.exe'". Is it because of system reason or their driver 's error? my platform's addresstable is: OEMAddressTable ;;;------------------------------------------------------------- ;;; Virtual(cached) Phys Addr MB ;;;------------------------------------------------------------- ; // Cotulla-Specific Mappings (common for all boards) DCD SDRAM_BASE_C_VIRTUAL, SDRAM_BASE_PHYSICAL, 64 ; (8000 0000, A000 0000)everything SDRAM-related (eboot RAM, eboot RAMIMG, nk RAM, nk RAMIMAGE, nk MEMDEFS, ethdbg buffs) DCD ZBANK_BASE_C_VIRTUAL, ZBANK_BASE_PHYSICAL, 1 ; (8600 0000, E000 0000) Zero-Bank (in RSVD slot)- No Phy Mem needed to back up DCD MEMC_BASE_C_VIRTUAL, MEMC_BASE_PHYSICAL, 1 ; (8610 0000, 4800 0000) Memory Controller DCD PERIF_BASE_C_VIRTUAL, PERIF_BASE_PHYSICAL, 32 ; (8620 0000, 4000 0000) Mem-Mapped Registers (perifs) DCD PCMCIA_S0_IO_C_VIRTUAL, PCMCIA_S0_IO_PHYSICAL, 32 ; (8820 0000, 2000 0000) PCMCIA S0 I/O Space DCD PCMCIA_S0_ATTR_C_VIRTUAL, PCMCIA_S0_ATTR_PHYSICAL, 32 ; (8A20 0000, 2800 0000) PCMCIA S0 ATTRIBUTE MEM Space DCD PCMCIA_S0_CMN_C_VIRTUAL, PCMCIA_S0_CMN_PHYSICAL, 64 ; (8C20 0000, 2C00 0000) PCMCIA S0 COMMON MEM Space DCD PCMCIA_S1_IO_C_VIRTUAL, PCMCIA_S1_IO_PHYSICAL, 32 ; (9020 0000, 3000 0000) PCMCIA S1 I/O Space DCD PCMCIA_S1_ATTR_C_VIRTUAL, PCMCIA_S1_ATTR_PHYSICAL, 32 ; (9220 0000, 3800 0000) PCMCIA S1 ATTRIBUTE MEM Space DCD PCMCIA_S1_CMN_C_VIRTUAL, PCMCIA_S1_CMN_PHYSICAL, 64 ; (9420 0000, 3C00 0000) PCMCIA S1 COMMON MEM Space DCD LCD_BASE_C_VIRTUAL, LCD_BASE_PHYSICAL, 1 ; (9820 0000, 4400 0000) LCDC DCD BOOT_FLASH_BASE_C_VIRTUAL, BOOT_FLASH_BASE_PHYSICAL, 32 ; (9830 0000, 0000 0000) BOOT-ROM FLASH (nCS0) DCD EXPBD_CPLD_BASE_C_VIRTUAL, EXPBD_CPLD_BASE_PHYSICAL, 1 ; (9C30 0000, 0800 0000) Neponset's CPLD Registers (nCS2) DCD BCR_BASE_C_VIRTUAL, BCR_BASE_PHYSICAL, 1 ; (9C40 0000, 0A00 0000) BCR (nCS2') DCD EXPBD_SA1111_BASE_C_VIRTUAL, EXPBD_SA1111_BASE_PHYSICAL, 1 ; (9C50 0000, 1000 0000) SA1111 on Neponset (nCS4) DCD EXPBD_FLASH_BASE_C_VIRTUAL, EXPBD_FLASH_BASE_PHYSICAL, 32 ; (9C60 0000, 0400 0000) eXpansion Flash ROM (nCS1) DCD SMC_ETHERNET_IO_BASE_C_VIRTUAL, SMC_ETHERNET_IO_BASE_PHYSICAL, 1 ; (9F60 0000, 0C00 0000) Ethernet - I/O Space (nCS3) DCD SMC_ETHERNET_ATTRIB_BASE_C_VIRTUAL, SMC_ETHERNET_ATTRIB_BASE_PHYSICAL, 1 ; (9F70 0000, 0E00 0000) Ethernet - Attrib Space (nCS3) config.bib NK 98380000 01F80000 RAMIMAGE RAM 800B8000 03C00000 RAM Fred Tag: USB memory size Tag: 53658
  - 4
    - ATADisk Problem Hi, Please see the debug output from the ATAIssueIdentify() routine of the ATAdisk driver. Do you think this is a Virtual memory mapping problem or hardware problem ? Thanks in advance. Basu. ATADISK: pATAReg = 0x1201f0 ATADISK: pATARegAlt = 0x1303f6. v_MemGran = 1 ATDISK:ATAIssueIdentify reading data 9 0 9 0 9 0 9 0 e9 7f f9 ff f9 ff 0 0 ................ 0 0 0 0 e0 ff f0 ff f0 ff f0 ff f0 ff 0 0 ................ 0 0 0 0 e0 ff f0 ff f0 ff f0 ff f0 ff 0 0 ................ 0 0 0 0 f0 ff f0 ff f0 ff f0 ff f0 ff 0 0 ................ 0 0 0 0 f0 ff f0 ff f0 ff f0 ff f0 ff 0 0 ................ 0 0 0 0 e0 ff f0 ff f0 ff f0 ff f0 ff 0 0 ................ 0 0 0 0 e0 ff f0 ff f0 ff f0 ff f0 ff 0 0 ................ 0 0 0 0 f0 ff f0 ff f0 ff f0 ff f0 ff 0 0 ................ 0 0 0 0 f0 ff f0 ff f0 ff f0 ff f0 ff 0 0 ................ 0 0 0 0 e0 ff f0 ff f0 ff f0 ff f0 ff 0 0 ................ 0 0 0 0 e0 ff f0 ff f0 ff f0 ff f0 ff 0 0 ................ 0 0 0 0 f0 ff f0 ff f0 ff f0 ff f0 ff 0 0 ................ 0 0 0 0 e0 ff f0 ff f0 ff f0 ff f0 ff 0 0 ................ 0 0 0 0 e0 ff f0 ff f0 ff f0 ff f0 ff 0 0 ................ 0 0 0 0 e0 ff f0 ff f0 ff f0 ff f0 ff 0 0 ................ 0 0 0 0 f0 ff f0 ff f0 ff f0 ff f0 ff 0 0 ................ 0 0 0 0 e0 ff f0 ff f0 ff f0 ff f0 ff 0 0 ................ 0 0 0 0 e0 ff f0 ff f0 ff f0 ff f0 ff 0 0 ................ 0 0 0 0 e0 ff f0 ff f0 ff f0 ff f0 ff 0 0 ................ 0 0 0 0 f0 ff f0 ff f0 ff f0 ff f0 ff 0 0 ................ 0 0 0 0 e0 ff f0 ff f0 ff f0 ff f0 ff 0 0 ................ 0 0 0 0 e0 ff f0 ff f0 ff f0 ff f0 ff 0 0 ................ 0 0 0 0 e0 ff f0 ff f0 ff f0 ff f0 ff 0 0 ................ 0 0 0 0 f0 ff f0 ff f0 ff f0 ff f0 ff 0 0 ................ 0 0 0 0 e0 ff f0 ff f0 ff f0 ff f0 ff 0 0 ................ 0 0 0 0 e0 ff f0 ff f0 ff f0 ff f0 ff 0 0 ................ 0 0 0 0 e0 ff f0 ff f0 ff f0 ff f0 ff 0 0 ................ 0 0 0 0 f0 ff f0 ff f0 ff f0 ff f0 ff 0 0 ................ 0 0 0 0 e0 ff f0 ff f0 ff f0 ff f0 ff 0 0 ................ 0 0 0 0 e0 ff f0 ff f0 ff f0 ff f0 ff 0 0 ................ 0 0 0 0 e0 ff f0 ff f0 ff f0 ff f0 ff 0 0 ................ 0 0 0 0 f0 ff f0 ff f0 ff f0 ff 0 0 0 0 ................ ATDISK: Identify Data - not MFM encoded Number of Cylinders: 9 Number of heads: 9 Unformatted bytes per track: 32745 Unformatted bytes per sector: 65529 Sectors per track: 65529 Serial number: .................... Buffer type reserved Buffer size in sectors: 65520 Number of Ecc bytes or r/w long: 65520 Firmware revision: ........ Model number: ........................................ Read/Write multiple not implemented Can not perform double word IO LBA mode NOT supported DMA NOT supported PIO cycle timing mode: ff DMA cycle timing mode: ff Current size fields MAY be valid Current number of cylinders: 65520 Current number of heads: 0 Current number of sectors/track: 0 Current sector capacity: -1048576 Sectors per interrupt with r/w multiple: 240 Multi sector setting valid Total user addressable sectors: -983056 Single word dma modes supported: f0 Single word transfer mode active: ff Multi word dma modes supported: 0 Multi word transfer mode active: 0 ATDISK:ATAIssueIdentify done ATADISK:InitDisk - Getting C:H:S from registry ATADISK:GetGeometry - RegQueryValueEx(Cylinders) returned 2 ATADISK:InitDisk - C:H:S = 9:9:65529 ATADISK:UseCHSMode - RegQueryValueEx(CHSMode) returned 2 ATADISK: DSK_Open(0x30dd0) Not loading FSD since StorageManager is active ATADISK: InitFSD succeeded ATADISK: DSK_Close ------------------------------------------------ Tag: USB memory size Tag: 53656
  - 5
    - Invalid System Service I created a tiny kernel OS image for the CE 4.20 emulator. This all works fine in release and debug builds. Then I added TCP/IP 4 from the catalog. When I create a release build everything works fine. But when I create a debug build, and try to "Download/Intialize" from Platform builder, I get a "First chance exception in NK.EXE. (0xC000001C: Invalid System Service)" dialog. I made sure "Enable Full Kernel Mode", "Enable Images Larger than 32MB" and "Enable Kernel Debugger" are all selected. "Enable CE Target Control Support", "Enable EBoot Space in Memory" and "Enable KITL" are also selected. What am I doing wrong? Kernel debugger is waiting to connect with target. 0 PID:0 TID:0 RTC - Status Reg B - 0x02 0 PID:0 TID:0 X86Init done, OEMAddressTable = 8026a648. Welcome to the Windows CE Shell. Type ? for help. Kernel debugger failed to connect with target (KDBG open stream failed). Debugger could not initialize connection. Kernel debugger is waiting to connect with target. 0 PID:0 TID:0 CEPC Firmware Init 0 PID:0 TID:0 RTC - Status Reg B - 0x02 0 PID:0 TID:0 PCIBIOS:: BIOS Address static map to addr=a00e0000 0 PID:0 TID:0 GetPicRoutingIrqTable: Start 0 PID:0 TID:0 search_pci_bios start 0 PID:0 TID:0 search_pci_bios end fails 0 PID:0 TID:0 GetPicRoutingIrqTable: FAILS!!! 0 PID:0 TID:0 Firmware Init Done. 0 PID:0 TID:0 Looking for rom chain 0 PID:0 TID:0 Rom chain NOT found 0 PID:0 TID:0 Booting Windows CE version 4.20 for (x86) 0 PID:0 TID:0 &pTOC = 80245a78, pTOC = 804a071c, pTOC->ulRamFree = 80511000, MemForPT = 00004000 0 PID:0 TID:0 Old or invalid version stamp in kernel structures - starting clean! 0 PID:0 TID:0 Configuring: Primary pages: 15078, Secondary pages: 0, Filesystem pages = 7539 0 PID:0 TID:0 Booting kernel with clean memory configuration: 0 PID:0 TID:0 Memory Sections: 0 PID:0 TID:0 [0] : start: 80516000, extension: 00004000, length: 03ae6000 0 PID:0 TID:0 X86Init done, OEMAddressTable = 802ab7b8. 0 PID:0 TID:0 Windows CE KernelInit 4294767306 PID:3fff002 TID:3fff1da Updated eptr->e32_vsize to = 00080000 4294767316 PID:3fff002 TID:3fff1da Scheduling the first thread. 4294767316 PID:3fff002 TID:3fff1da 0x83fff030: KernelInit2: pCurThread=83fff030 hCurThread=03fff1da hCurProc=03fff002, KernelInit = 8028be3e 4294767336 PID:3fff002 TID:3fff1da 0x83fff030: Updated eptr->e32_vsize to = 00010000 4294767356 PID:3fff002 TID:3fff1da 0x83fff030: >>> Loading module NK.EXE at address 0x80240000-0x802C0000 (RW data at 0x804D3000-0x8050648B) Kernel debugger connected (KDBG stream opened). Kernel Version 1169 Checked loaded at 0x80240000, data relocated at 0x804d3000 Debugger connection established (Target CPU is X86). Loaded symbols for 'C:\WINCE420\PUBLIC\GCUSTOM\RELDIR\EMULATOR_X86DEBUG\NK.EXE' Loaded symbols for 'C:\WINCE420\PUBLIC\GCUSTOM\RELDIR\EMULATOR_X86DEBUG\KD.DLL' Finished re-loading kernel modules. Loaded symbols for 'C:\WINCE420\PUBLIC\GCUSTOM\RELDIR\EMULATOR_X86DEBUG\COREDLL.DLL' Loaded symbols for 'C:\WINCE420\PUBLIC\GCUSTOM\RELDIR\EMULATOR_X86DEBUG\FILESYS.EXE' Loaded symbols for 'C:\WINCE420\PUBLIC\GCUSTOM\RELDIR\EMULATOR_X86DEBUG\FSDMGR.DLL' Loaded symbols for 'C:\WINCE420\PUBLIC\GCUSTOM\RELDIR\EMULATOR_X86DEBUG\RELFSD.DLL' 4294767406 PID:3fff002 TID:3fff1da 0x83fff030: first = 01fb0000, last = 02000000, SharedDllBase = 03d10000 4294767436 PID:3fff002 TID:3fff1da 0x83fff030: >>> Loading module coredll.dll at address 0x03FB0000-0x03FF5000 (RW data at 0x01FFF000-0x01FFF7B0) 4294767466 PID:3fff002 TID:3fff1da 0x83fff030: Did not find emulation code for x86... using floating point hardware. 4294767556 PID:a3feff4a TID:a3feff1a 0x83fefd70: >>> Loading module filesys.exe at address 0x04010000-0x0404E000 4294767606 PID:a3feff4a TID:a3feff1a 0x83fefd70: FileSystem Starting - starting with clean file system 4294767706 PID:a3feff4a TID:a3feff1a 0x83fefd70: >>> Loading module fsdmgr.dll at address 0x03F60000-0x03F77000 (RW data at 0x01FF7000-0x01FF7760) 4294767756 PID:a3feff4a TID:a3feff1a 0x83fefd70: >>> Loading module relfsd.dll at address 0x03F90000-0x03F99000 (RW data at 0x01FFB000-0x01FFBABC) 4294767806 PID:a3feff4a TID:a3feff1a 0x83fefd70: FSREG: Logging in default user. 4294767806 PID:a3feff4a TID:a3feff1a 0x83fefd70: SetCurrentUser: Logging out (nobody), logging in default 4294767806 PID:a3feff4a TID:a3feff1a 0x83fefd70: FS: Using default path "\profiles\" 4294767816 PID:a3feff4a TID:a3feff1a 0x83fefd70: SetCurrentUser: User hives not supported -- using same registry for all users 4294767816 PID:a3feff4a TID:a3feff1a 0x83fefd70: FS: Using default path "Windows\" 4294767866 PID:a3feff4a TID:a3feff1a 0x83fefd70: FS: Using default path "Windows\" 4294767946 PID:a3feff4a TID:43fd1fd2 0x83ff2db8: Mounted ReleaseFSD volume '\Release' 4294767996 PID:a3feff4a TID:a3feff1a 0x83fefd70: Filesystem initialized! 4294767996 PID:3fff002 TID:e3ff2f92 0x83fef800: InitializeJit 4294767996 PID:3fff002 TID:e3ff2f92 0x83fef800: InitMUI: DISABLED (-2145012568) 4294768246 PID:e3fefbb2 TID:e3fcbc32 0x83ff2db8: >>> Loading module toolhelp.dll at address 0x03F80000-0x03F84000 (RW data at 0x01FF9000-0x01FF9054) Loaded symbols for 'C:\WINCE420\PUBLIC\GCUSTOM\RELDIR\EMULATOR_X86DEBUG\TOOLHELP.DLL' 4294768256 PID:e3fefbb2 TID:e3fcbc32 0x83ff2db8: >>> Loading module shell.exe at address 0x06010000-0x06023000 Loaded symbols for 'C:\WINCE420\PUBLIC\GCUSTOM\RELDIR\EMULATOR_X86DEBUG\SHELL.EXE' 4294768366 PID:83fd1fd2 TID:83fcb93a 0x83fcba88: >>> Loading module device.exe at address 0x08010000-0x0801C000 Loaded symbols for 'C:\WINCE420\PUBLIC\GCUSTOM\RELDIR\EMULATOR_X86DEBUG\DEVICE.EXE' 4294768556 PID:83fcba5a TID:83fefd32 0x83fef800: >>> Loading module ceemulsrv.exe at address 0x0A010000-0x0A014000 Loaded 'C:\WINCE420\PUBLIC\GCUSTOM\RELDIR\EMULATOR_X86DEBUG\CEEMULSRV.EXE', no matching symbolic information found. 4294768576 PID:a3feff4a TID:83fefd32 0x83fef800: ObjectCall: Failed(1): 16 4294768576 PID:a3feff4a TID:83fefd32 0x83fef800: Exception ffffffff Thread=83fef800 Proc=a3feff4a 'filesys.exe' 4294768576 PID:a3feff4a TID:83fefd32 0x83fef800: AKY=00000013 PC=8029c33a ESP=0a11d5c0 EA=00000000 Debugger disconnected successfully. Tag: USB memory size Tag: 53654
  - 6
    - Why does SC_GetTickCount call CGSTCE instead of just returning CurMSec? Can anybody tell me why SC_GetTickCount would call CPUGetSysTimerCountElaspsed instead of simply returning CurMSec? On our XScale platform, we are experiencing a hard to repro problem where one of a handful of drivers stops responding for about 20 minutes. We've observed that at times GetTickCount momentarily jumps ahead by approximately 1165210, which is the number of milliseconds to rollover a 32 bit counter running at 3.686 MHz. The theory is that when the "victim" driver calls Sleep or WaitForSingleObject, the scheduler gets this erroneous value from GetTickCount and schedules the thread to wake up 20 minutes later than intended. So, I'm scrutinizing SC_GetTickCount. Thanks Tag: USB memory size Tag: 53652
  - 7
    - Ne2000-compatible dri Hi, I am developing BSP for MIPS based platform. I need to enable CETK which in turn demands a fully functional Ethernet port. For this purpose I need to bring up my on-board Ethernet port which is neither PCI based nor ISA based. It is mapped through IO controller. I added Ne2000-compatible driver from drivers->Networking->LAN devices from Catalog and set the environment variable 'BSP_ICS' in my platform settings. Since the registry entries corresponding to this driver have been added in platform.reg, I expected the driver to be loaded at boot-up. But I am not able to see any debug string on console which were given in Ne2000Initialize() function of the driver nor am I able to see the corresponding dll loaded among system modules loaded. There are couple of doubts I have: 1.. Is there something else to be done which I am missing? Some registry entries or environment variables? 2.. Since this Ne2000-compatible is PCI based and my Ethernet port is not a PCI-based one, is it that it does not load the driver at all because of this reason? Tag: USB memory size Tag: 53645
  - 8
    - Ethernet download of large nk.bin fails at same location Hi I am attempting to download a 23M RAM debug image to my PXA255 based board with 32M RAM onboard over ethernet. After about 16.1M, it fails repeatedly at same location each time. I use routines used in the XScale BSP EbootInitEtherTransport, and EbootEtherReadData, but my bootloader code is otherwise modified from XSC1BD. My download fails after 16.1M and with error message from the PB the Download failed, probably due to my device stopping to repond. I am connected with a HW debugger and when hitting break after download failed, I see that it is somewhere in the ne2000 routines, but the stack pointer and cpsr looks OK, so the system looks like it has entered an infinite loop or something. When trying to download other images, they pass if they are smaller release images, but the big debug images all fail, each at its own dedicated location. I know since I am using a "personal" bootloader, it may be a longshot, but have anybody seen similar issues? My boot.bib and config.bib MEMORY sections looks as follows when downloading nk to RAM , maybe the error lies in here. Note that the bootloader is using physical space, while the image is using virtual adressing mode. boot.bib MEMORY EBOOT 00001000 0007E000 RAMIMAGE RAM 04204000 00110000 RAM TRANSTABL 04000000 00004000 RESERVED STACK 04004000 001FC000 RESERVED IRQSTACK 04200000 00004000 RESERVED config.bib ; Name|Virtual/Cached |Size| Region Type MEMORY NK 84314000 0173C000 RAMIMAGE RAM 85A50000 005B0000 RAM EBOOT 80000000 00080000 RESERVED Regards, Inger Tag: USB memory size Tag: 53641
  - 9
    - Secure Digital (SD) cards Hi As far as I understand wince.net 4.2 doesn't have drivers for Secure Digital (SD) cards, so we have to get a driver from the manufacturer or attempt to write our own. Good news is that Windows CE 5.0 includes an SD Memory client driver, which enables a Windows CE-based device to access an SD Memory card. Would be most grateful if someone would confirm this. Best Regards. Tag: USB memory size Tag: 53638
  - 10
    - Regional setting with Korean fonts I posted this question yesterday and I am still struggling it. Can anyone help me please? I really need this done. I want to add Korean in the regional settings. So I went to PlatformBuilder->Project->settings->locale, add Korean, then add font GL_CE and Subset 1_30 under catalog International to my project. After I build the OS and start the device, in the Regional Setting, I still see square under Korean. I did the same thing for Chinese. Everthing is ok. I tried everthing that I can think about. Can anyone give me any information, please? Is Korean fonts supported at all? Thanks in advance Chen Tag: USB memory size Tag: 53637
  - 11
    - USB drivers problem PB 4.2 Hello experts, here is a comparison of two cases which we currently have. Common part - targeted hardware VIA Ededn board (x86) with soldered in usb controller. Tried it with desktop OS as a test - both usb ports work. A) original (no QFEs) install of Platform Builder 4.1. Create simple platform (like enterprise web pad) x86 based BSP provided with PB and add the required parts to support usb storage device. Build and test - all works well. We use PB 4.1 normally and it behaves so on other platforms too. B) original (no QFEs) install of Platform Builder 4.2. This thing again looks difefernt so I had to learn where the old parts went. Create simple platform (like above) x86 based BSP provided with PB and add the required parts to support usb storage device. Build and test - usb doesn't work. It looks like in 4.2 usb driver isn't get loaded, though it is present in /Drivers/usb registry, but not in Drivers/Active branch. Hardware setting are common for both cases. We use loadcepc for 4.1 which came with PB 4.1 and loadcepc for 4.2 which came with 4.2. So it looks to me that something did change between 4.1 and 4.2 in usb drivers ( btw, this is an example why we don't migrate - too many efforts just to restore existing functionality)... Any ideas where to look for ? Or some kind of fix ? Anyone else did see such behaviour ? Sincerely Sergei Tag: USB memory size Tag: 53627
  - 12
    - Task Manager wince.net 4.2 Hi We have had an app writer in who develops for pocket pc devices and was quite disappointed that our device didn't have a task manager. Is there a task manager or equivalent in windows ce .net 4.2, that allows us to see apps runing and killing hung apps like in PPC2003. Regards Tag: USB memory size Tag: 53626
  - 13
    - Mouse problem with Headless Device Hello everybody. I've a problem with Platform Builder v4.2 I've made a project under windows C.E 4.0, that worked correctly. Now, I've upgraded to Windows C.E 4.2, and something happened... the mouse doesn't work anymore. In my project, I've writtent my own shell. In 4.0, this shell was able to receive WM_MOUSEMOVE, WM_L(R)BUTTONUP(DOWN) events. Since I'm under v4.2, this doesn't work anymore. My platform is a headless device, with every features needed (minimal GDI configuration, minimal Event notifications, etc...). In order to add the mouse, I had to manually add the SYSGEN_CURSOR variable to my platform. Then, it added the mouse in Features\Shell and user interface\User interface\Mouse. But, I already have a folder named "shell and user interface" under this root : Features\Custom device [headless device]\Shell and user interface. (here I have "Graphics windowing and events, with minimal GDI configuration, minimal GWES configuration, minimal input configuration, minimal notifications configuration, minimal window manager configuration). The main window of my shell does not receive WM_MOUSEMOVE event. I can't get cursor position with GetCursorPos(&mousePoint); . I've also noticed that in my Release Directory, I cannot found a file "kbdmouse.dll". WM_KEYDOWN and WM_KEYUP events are not received. Can anyone help me to correctly build the mouse/keyboard feature in a headless device in order to read my cursor position? Thanks in advance. Tag: USB memory size Tag: 53625
  - 14
    - COREDLL.DLL ERROR Hi, I am working on a sandgate platform with xscale pxa255. When I use KITL(VMINI) or activesync(usb client) to transfer a big file(1M),a memory error in coredll.dll will happen. But while I use it to tansfer a small file(30k),it will work well. I want to know this is the divice driver error or system error? Any idea will be welcome. Thanks. Fred Tag: USB memory size Tag: 53623
  - 15
    - DEBUGCHK error in smartcard when I load smartcard driver and initialize driver,the following error occurs "0x8bc15430: SCard: DEBUGCHK failed in file d:\mckendric\private\winceos\drivers\smartcrd\scard\reader.cpp at line 485 " Could anyone who hold full kernel source codes tell me the situation at line 485 in reader.c. Thx! Tag: USB memory size Tag: 53622
  - 16
    - How to output Hive format by regcomp.exe? How to output Hive format by regcomp.exe? Hi All: I just want to upgrade RAM-based registry to Hive-based. Therefore, I follow steps as below: 1. set BSP_ENABLE_FSREGHIVE=1 2. set IMGREGHIVE=1 3. set SYSGEN_FSREGHIVE=1 in cesysten.bat 4. set SYSGEN_FSREGRAM= in cesysten.bat 5. add the key in platform.reg ; HIVE BOOT SECTION [HKEY_LOCAL_MACHINE\init\BootVars] "SYSTEMHIVE"="Documents and Settings\\system.hv" "PROFILEDIR"="Documents and Settings" "Start DevMgr"=dword:1 "DefaultUser"="User" ; END HIVE BOOT SECTION Finally, I find regcomp can't transfer reginit.ini to hive format. -----output msg-------- E:\wince\release>regcomp reginit.ini . regcomp: Got LOCALE=0409, using CodePage=1252 regcomp: Overwriting existing value [HKEY_LOCAL_MACHINE\System\StorageManager\ TFS] "Flags" in system registry regcomp: Overwriting existing value [HKEY_LOCAL_MACHINE\System\StorageManager] PNPUnloadDelay" in system registry regcomp: Overwriting existing value [HKEY_LOCAL_MACHINE\System\StorageManager] PNPUnloadDelay" in system registry regcomp: InitRegistry Finished (462 lines). regcomp: Writing registry in fdf format regcomp: Done. ---------------------- The help of regcomp.exe says "determined from flags", what flag is it? How to output Hive format? Output type will be determined from flags in the source file. FDF Output: default.fdf Hive Output: default.hv, boot.hv, user.hv Tag: USB memory size Tag: 53618
  - 17
    - Problem with taskbar ontop setting Hi, i am working with Windows CE .Net 4.2. i want to disable OnTop property of the taskbar. i have following entries in our platform.reg [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\AutoHide] "Default"=dword:0 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\OnTop] "Default"=dword:0 but after cold start, the taskbar is still on top even if registry value is 0. if i do it manually from Taskbar Settings dialog it works properly. is this a bug or is there a different way to do this? i found an old newsgroup link suggesting that it was a bug in 3.0. is it fixed in 4.2? http://groups.google.com/groups?q=ontop+taskbar+windows+ce+.net&hl=en&lr=&ie=UTF-8&selm=%23Si%24IHiZBHA.988%40tkmsftngp03&rnum=1 Thanks, Siddhesh Tag: USB memory size Tag: 53616
  - 18
    - 18BPP Hello, We are trying to port WinCE onto an ARM board. Our LCD is capable of 18BPP whereas WinCE supports only 8,16,24 or 32BPP. How do we change the WinCE display driver to get 18BPP working? Thanks Regards Vidya Tag: USB memory size Tag: 53614
  - 19
    - 18bpp Hello, We are trying to port WinCE onto an ARM board. Our LCD is capable of 18BPP whereas WinCE supports only 8,16,24 or 32BPP. How do we change the WinCE display driver to get 18BPP working? Thanks Regards Vidya Tag: USB memory size Tag: 53613
  - 20
    - 18BPP color depth Hello, We are trying to port WinCE onto an ARM board. Our LCD is capable of 18BPP whereas WinCE supports only 8,16,24 or 32BPP. How do we change the WinCE display driver to get 18BPP working? Thanks Regards Vidya Tag: USB memory size Tag: 53612
  - 21
    - How to insert/delete/modify the help link in the main help? Hi, In PCC, click [start][Help], many help links are shown. How to insert/delete/modify the help link in the main help? Thanks. Yu Tag: USB memory size Tag: 53611
  - 22
    - how can I register a device in my driver?how can i use ActivateDev how can I register a device in my driver?how can i use ActivateDeviceE?Thank for help! Tag: USB memory size Tag: 53610
  - 23
    - How to enable polled KITL? hi, There are some errors in my KITL,so I want to use the polled KITL. But I don't know the detailed method. Need I just pass the KITL_SYSINTR_NOINTR value to the kernel in the Interrupt parameter of KITLTRANSPORT and whether I need call KitlInit (FALSE)? If need I call KitlInit (FALSE), what is the relationship between PASSIVE kitl with polled KITL? Fred Tag: USB memory size Tag: 53608
  - 24
    - =?ISO-8859-1?Q?Can=B4t_see_Hard_Disk_in_the_image?= I did an image for a 486 DX2 66 with 1 Gb HD and booted it with loadcepc, from the HD. After the boot, I got the image runing well, but I couldn´t mount the HD. The manager apears in the control panel but all blank. I ´ve put the FAT and the ATAPI components in the image. Has anybody faced it before? Any help will be apreciated. Thanks Tag: USB memory size Tag: 53601
  - 25
    - Debug image throws First chance exception I created a tiny kernel OS image for the CE 4.20 emulator. This all works fine in release and debug builds. Then I added TCP/IP 4 from the catalog. When I create a release build everything works fine. But when I create a debug build, I get a "First chance exception in NK.EXE. (0xC000001C: Invalid System Service)" dialog. I made sure "Enable Full Kernel Mode", "Enable Images Larger than 32MB" and "Enable Kernel Debugger" are all selected. "Enable CE Target Control Support", "Enable EBoot Space in Memory" and "Enable KITL" are also selected. What am I doing wrong? Kernel debugger is waiting to connect with target. 0 PID:0 TID:0 RTC - Status Reg B - 0x02 0 PID:0 TID:0 X86Init done, OEMAddressTable = 8026a648. Welcome to the Windows CE Shell. Type ? for help. Kernel debugger failed to connect with target (KDBG open stream failed). Debugger could not initialize connection. Kernel debugger is waiting to connect with target. 0 PID:0 TID:0 CEPC Firmware Init 0 PID:0 TID:0 RTC - Status Reg B - 0x02 0 PID:0 TID:0 PCIBIOS:: BIOS Address static map to addr=a00e0000 0 PID:0 TID:0 GetPicRoutingIrqTable: Start 0 PID:0 TID:0 search_pci_bios start 0 PID:0 TID:0 search_pci_bios end fails 0 PID:0 TID:0 GetPicRoutingIrqTable: FAILS!!! 0 PID:0 TID:0 Firmware Init Done. 0 PID:0 TID:0 Looking for rom chain 0 PID:0 TID:0 Rom chain NOT found 0 PID:0 TID:0 Booting Windows CE version 4.20 for (x86) 0 PID:0 TID:0 &pTOC = 80245a78, pTOC = 804a071c, pTOC->ulRamFree = 80511000, MemForPT = 00004000 0 PID:0 TID:0 Old or invalid version stamp in kernel structures - starting clean! 0 PID:0 TID:0 Configuring: Primary pages: 15078, Secondary pages: 0, Filesystem pages = 7539 0 PID:0 TID:0 Booting kernel with clean memory configuration: 0 PID:0 TID:0 Memory Sections: 0 PID:0 TID:0 [0] : start: 80516000, extension: 00004000, length: 03ae6000 0 PID:0 TID:0 X86Init done, OEMAddressTable = 802ab7b8. 0 PID:0 TID:0 Windows CE KernelInit 4294767306 PID:3fff002 TID:3fff1da Updated eptr->e32_vsize to = 00080000 4294767316 PID:3fff002 TID:3fff1da Scheduling the first thread. 4294767316 PID:3fff002 TID:3fff1da 0x83fff030: KernelInit2: pCurThread=83fff030 hCurThread=03fff1da hCurProc=03fff002, KernelInit = 8028be3e 4294767336 PID:3fff002 TID:3fff1da 0x83fff030: Updated eptr->e32_vsize to = 00010000 4294767356 PID:3fff002 TID:3fff1da 0x83fff030: >>> Loading module NK.EXE at address 0x80240000-0x802C0000 (RW data at 0x804D3000-0x8050648B) Kernel debugger connected (KDBG stream opened). Kernel Version 1169 Checked loaded at 0x80240000, data relocated at 0x804d3000 Debugger connection established (Target CPU is X86). Loaded symbols for 'C:\WINCE420\PUBLIC\GCUSTOM\RELDIR\EMULATOR_X86DEBUG\NK.EXE' Loaded symbols for 'C:\WINCE420\PUBLIC\GCUSTOM\RELDIR\EMULATOR_X86DEBUG\KD.DLL' Finished re-loading kernel modules. Loaded symbols for 'C:\WINCE420\PUBLIC\GCUSTOM\RELDIR\EMULATOR_X86DEBUG\COREDLL.DLL' Loaded symbols for 'C:\WINCE420\PUBLIC\GCUSTOM\RELDIR\EMULATOR_X86DEBUG\FILESYS.EXE' Loaded symbols for 'C:\WINCE420\PUBLIC\GCUSTOM\RELDIR\EMULATOR_X86DEBUG\FSDMGR.DLL' Loaded symbols for 'C:\WINCE420\PUBLIC\GCUSTOM\RELDIR\EMULATOR_X86DEBUG\RELFSD.DLL' 4294767406 PID:3fff002 TID:3fff1da 0x83fff030: first = 01fb0000, last = 02000000, SharedDllBase = 03d10000 4294767436 PID:3fff002 TID:3fff1da 0x83fff030: >>> Loading module coredll.dll at address 0x03FB0000-0x03FF5000 (RW data at 0x01FFF000-0x01FFF7B0) 4294767466 PID:3fff002 TID:3fff1da 0x83fff030: Did not find emulation code for x86... using floating point hardware. 4294767556 PID:a3feff4a TID:a3feff1a 0x83fefd70: >>> Loading module filesys.exe at address 0x04010000-0x0404E000 4294767606 PID:a3feff4a TID:a3feff1a 0x83fefd70: FileSystem Starting - starting with clean file system 4294767706 PID:a3feff4a TID:a3feff1a 0x83fefd70: >>> Loading module fsdmgr.dll at address 0x03F60000-0x03F77000 (RW data at 0x01FF7000-0x01FF7760) 4294767756 PID:a3feff4a TID:a3feff1a 0x83fefd70: >>> Loading module relfsd.dll at address 0x03F90000-0x03F99000 (RW data at 0x01FFB000-0x01FFBABC) 4294767806 PID:a3feff4a TID:a3feff1a 0x83fefd70: FSREG: Logging in default user. 4294767806 PID:a3feff4a TID:a3feff1a 0x83fefd70: SetCurrentUser: Logging out (nobody), logging in default 4294767806 PID:a3feff4a TID:a3feff1a 0x83fefd70: FS: Using default path "\profiles\" 4294767816 PID:a3feff4a TID:a3feff1a 0x83fefd70: SetCurrentUser: User hives not supported -- using same registry for all users 4294767816 PID:a3feff4a TID:a3feff1a 0x83fefd70: FS: Using default path "Windows\" 4294767866 PID:a3feff4a TID:a3feff1a 0x83fefd70: FS: Using default path "Windows\" 4294767946 PID:a3feff4a TID:43fd1fd2 0x83ff2db8: Mounted ReleaseFSD volume '\Release' 4294767996 PID:a3feff4a TID:a3feff1a 0x83fefd70: Filesystem initialized! 4294767996 PID:3fff002 TID:e3ff2f92 0x83fef800: InitializeJit 4294767996 PID:3fff002 TID:e3ff2f92 0x83fef800: InitMUI: DISABLED (-2145012568) 4294768246 PID:e3fefbb2 TID:e3fcbc32 0x83ff2db8: >>> Loading module toolhelp.dll at address 0x03F80000-0x03F84000 (RW data at 0x01FF9000-0x01FF9054) Loaded symbols for 'C:\WINCE420\PUBLIC\GCUSTOM\RELDIR\EMULATOR_X86DEBUG\TOOLHELP.DLL' 4294768256 PID:e3fefbb2 TID:e3fcbc32 0x83ff2db8: >>> Loading module shell.exe at address 0x06010000-0x06023000 Loaded symbols for 'C:\WINCE420\PUBLIC\GCUSTOM\RELDIR\EMULATOR_X86DEBUG\SHELL.EXE' 4294768366 PID:83fd1fd2 TID:83fcb93a 0x83fcba88: >>> Loading module device.exe at address 0x08010000-0x0801C000 Loaded symbols for 'C:\WINCE420\PUBLIC\GCUSTOM\RELDIR\EMULATOR_X86DEBUG\DEVICE.EXE' 4294768556 PID:83fcba5a TID:83fefd32 0x83fef800: >>> Loading module ceemulsrv.exe at address 0x0A010000-0x0A014000 Loaded 'C:\WINCE420\PUBLIC\GCUSTOM\RELDIR\EMULATOR_X86DEBUG\CEEMULSRV.EXE', no matching symbolic information found. 4294768576 PID:a3feff4a TID:83fefd32 0x83fef800: ObjectCall: Failed(1): 16 4294768576 PID:a3feff4a TID:83fefd32 0x83fef800: Exception ffffffff Thread=83fef800 Proc=a3feff4a 'filesys.exe' 4294768576 PID:a3feff4a TID:83fefd32 0x83fef800: AKY=00000013 PC=8029c33a ESP=0a11d5c0 EA=00000000 Debugger disconnected successfully. Tag: USB memory size Tag: 53597
- Next
  - 1
    - Problem building after QFE 040423_KB840880 When I try to build my x86 platform after installing this qfe, I get unresolved symbol errors when linking ndislib.lib. I replaced the ndislib.lib file installed by this qfe with the orginal file, and it builds w/o errors. Thanks for any suggestions. From build.log: ... Microsoft (R) Library Manager Version 6.24.3064 Copyright (C) Microsoft Corporation. All rights reserved. -subsystem:windowsce,4.20 Creating library D:\WINCE420\PUBLIC\56SAM_~1\WINCE420\56SAM\cesysgen\sdk\lib\x86\retail\ndis.lib and object D:\WINCE420\PUBLIC\56SAM_~1\WINCE420\56SAM\cesysgen\sdk\lib\x86\retail\ndis.exp set LIB=D:\WINCE420\sdk\CE\lib link /LARGEADDRESSAWARE -out:D:\WINCE420\PUBLIC\56SAM_~1\WINCE420\56SAM\cesysgen\oak\target\x86\retail\ndis.dll -dll -machine:x86 @C:\DOCUME~1\JOHNC~1.WOR\LOCALS~1\Temp\nmAD2.tmp Microsoft (R) Incremental Linker Version 6.24.3064 Copyright (C) Microsoft Corporation. All rights reserved. -nodefaultlib -entry:DllEntry -debug -debugtype:cv -incremental:no /opt:ref -pdb:D:\WINCE420\PUBLIC\56SAM_~1\WINCE420\56SAM\cesysgen\oak\target\x86\retail\ndis.pdb -map:D:\WINCE420\PUBLIC\56SAM_~1\WINCE420\56SAM\cesysgen\oak\target\x86\retail\ndis.map -savebaserelocations:D:\WINCE420\PUBLIC\56SAM_~1\WINCE420\56SAM\cesysgen\oak\target\x86\retail\ndis.rel -MERGE:.rdata=.text -ignore:4001,4070,4078,4086,4089,4096,4099,4108 /STACK:65536,4096 -subsystem:windowsce,4.20 /base:0x10000000 D:\WINCE420\public\common\oak\lib\x86\retail\ndislib.lib D:\WINCE420\public\common\sdk\lib\x86\retail\ntcompat.lib D:\WINCE420\PUBLIC\56SAM_~1\WINCE420\56SAM\cesysgen\oak\lib\x86\retail\ceddk.lib D:\WINCE420\PUBLIC\56SAM_~1\WINCE420\56SAM\cesysgen\sdk\lib\x86\retail\coredll.lib D:\WINCE420\public\common\sdk\lib\x86\retail\corelibc.lib D:\WINCE420\PUBLIC\56SAM_~1\WINCE420\56SAM\cesysgen\sdk\lib\x86\retail\ndis.exp ndislib.lib(nfilter.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(ndispwr.obj) : error LNK2019: unresolved external symbol _CTEFreeMem referenced in function _ndisSetDevicePowerDownComplete ndislib.lib(ceinternal.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(minint.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(mac.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(tfilter.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(cepcmcia.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(sendm.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(config.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(timerm.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(requestm.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(ndispnp.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(miniport.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(configm.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(initpnp.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(common.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(lookasid.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(protocol.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(init.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(ndis.obj) : error LNK2019: unresolved external symbol _CTEFreeMem referenced in function _ndisUnbindProtocol ndislib.lib(efilter.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(minisub.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(cestreamdrv.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(ceinternal.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(tfilter.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(cepcmcia.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(nfilter.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(ndispwr.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(config.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(timerm.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(requestm.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(mac.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(miniport.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(configm.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(initpnp.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(sendm.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(common.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(lookasid.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(protocol.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(init.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(ndis.obj) : error LNK2019: unresolved external symbol _CTEAllocMem referenced in function _ndisReferenceMiniportByName ndislib.lib(efilter.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(minisub.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(cestreamdrv.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(timerm.obj) : error LNK2019: unresolved external symbol _SysintrNetworkInterruptMask referenced in function _ndisSyncWithInterrupt ndislib.lib(timerm.obj) : error LNK2019: unresolved external symbol _SysintrNetworkInterruptDone referenced in function _ndisMIsr D:\WINCE420\PUBLIC\56SAM_~1\WINCE420\56SAM\cesysgen\oak\target\x86\retail\ndis.dll : fatal error LNK1120: 4 unresolved externals NMAKE : fatal error U1077: 'link' : return code '0x460' Stop. NMAKE : fatal error U1077: 'D:\WINCE420\sdk\bin\i386\nmake.exe' : return code '0x2' Stop. Tag: USB memory size Tag: 53591
  - 2
    - Regional settings with Korean fonts Hi, Can anyone help me with this problem? I want to add Korean in the regional settings. So I went to PlatformBuilder->Project->settings->locale, add Korean, then add font GL_CE and Subset 1_30 under catalog International to my project. After I build the OS and start the device, in the Regional Setting, I still see square under Korean. I did the same thing for Chinese (both simplified and traditional). I can see correct Chinese charactors. Any information is appreciated. Thanks a lot. Tag: USB memory size Tag: 53590
  - 3
    - Full DUplex hi! I am writing a driver for a thernet controller which supports 100/10 Mbps Ful duplex operation.. at one place in the documentation for the MiniportqueryInformation I read that WinCE doesn't support full duplex.. At many other places there are statments like "if the miniport driver is full duplex".... Now I am not able to understand clewarly that whether or not I can take th full duplex adavantage of my NIC through a miniport driver writtten for WinCE. Can anyone please clarify me on this. regards -Nitin Tag: USB memory size Tag: 53589
  - 4
    - Understand Debugger Output Info Hi all, I am working with a Headless device, just with the tiny kernel and TCP/IP communications. I cannot debug the image with platform builder, but I can see the debug messages through the serial line. I often get debug messages as follows: "ObjectCall : Failed(2) : h=xxxxxx\r\n Invalid Handle : Set = 1 Method = 6" "ObjectCall : Failed(2) : h=xxxxxx\r\n Invalid Handle : Set = 7 Method = 3" I know that these messages are generated by the kernel, presumably due to the lack of some API function in the image. The source code that generates this output is located at ... "%WINCEROOT%\PRIVATE\WINCEOS\COREOS\NK\KERNEL\objdisp.c" ..but "using" the source code gives me no info. My question is : How can I know the API functions that are generating that output, taking into account that my only information is the values of "Set" and "Method" variables? I've been looking for an API table in the sources but I have had no success. Thanks in advance, Roberto Tag: USB memory size Tag: 53587
  - 5
    - Compiling / Linking the BIOS BOOT LOADER sample Hi, I'm using Windows CE 4.2 and a Geode-based system. I would like to make some changes in the BIOS boot loader. I found the sources in PUBLIC\COMMON\OAK\CSP\i486\BIOSLOADER\LOADER. But I don't know how can I compile/link these sources. I took a look to the file makefile.inc and it seems to me that I should use PB. But how ? Regards. Gabriel. Tag: USB memory size Tag: 53584
  - 6
    - help,help!! am using the smdk2410 , after build in the debug, it print out as below and stopped, but in the release ,it can run well, include the targt controll and gwes. it seems it 's filesys's problem, but i had no idea and it had take me three days. so anyone can help me will welcome, and thanks in advance. 4294768996 PID:6fede23e TID:6fee3fd2 0x8fede000: FMD::FMD_Init 4294769006 PID:6fede23e TID:6fee3fd2 0x8fede000: FLASHDRV.DLL:BuildupMappingInfo() - Enter. 4294769366 PID:6fede23e TID:6fee3fd2 0x8fede000: FMD::FMD_OEMIoControl = 0x71c24 4294769386 PID:6fede23e TID:6fee3fd2 0x8fede000: >>> Loading module mspart.dll at address 0x03CF0000-0x03CFC000 (RW data at 0x01FDA000-0x01FDA4A4) Loaded symbols for 'D:\WINCE420\PUBLIC\PG622\RELDIR\SAMSUNG_SMDK2410_ARMV4DEBUG\MSPART.DLL' 4294769406 PID:6fede23e TID:6fee3fd2 0x8fede000: Loading partition driver mspart.dll hModule=8FEC0A14 4294769416 PID:6fede23e TID:6fee3fd2 0x8fede000: Driver mspart.dll loaded 4294769426 PID:6fede23e TID:6fee3fd2 0x8fede000: <<< Unloading module mspart.dll at address 0x03CF0000-0x03CFC000 (RW data at 0x01FDA000-0x01FDA4A4) Unloaded symbols for 'D:\WINCE420\PUBLIC\PG622\RELDIR\SAMSUNG_SMDK2410_ARMV4DEBUG\MSPART.DLL' 4294769446 PID:6fede23e TID:6fee3fd2 0x8fede000: Opened the store hStore=4FEC0926 4294769456 PID:6fede23e TID:6fee3fd2 0x8fede000: NumSec=130688 BytesPerSec=512 FreeSec=0 BiggestCreatable=0 4294769466 PID:6fede23e TID:6fee3fd2 0x8fede000: Partition PART00 NumSectors=130688 4294769486 PID:6fede23e TID:6fee3fd2 0x8fede000: >>> Loading module fatfsd.dll at address 0x03EB0000-0x03ED8000 (RW data at 0x01FF9000-0x01FF9674) Loaded symbols for 'D:\WINCE420\PUBLIC\PG622\RELDIR\SAMSUNG_SMDK2410_ARMV4DEBUG\FATFSD.DLL' 4294769506 PID:6fede23e TID:6fee3fd2 0x8fede000: FSD_MountDisk: mounting volumes for hDsk=000A3E80 4294769516 PID:6fede23e TID:6fee3fd2 0x8fede000: FATFS!MountDisk: BPB_HiddenSectors(-1) != 0 4294769526 PID:6fede23e TID:6fee3fd2 0x8fede000: FATFS!OpenVolume: access time updates disabled 4294769536 PID:6fede23e TID:6fee3fd2 0x8fede000: FATFS!OpenVolume: event logging enabled 4294769546 PID:6fede23e TID:6fee3fd2 0x8fede000: FATFS!OpenVolume: automatic scanning disabled 4294769556 PID:6fede23e TID:6fee3fd2 0x8fede000: FATFS!OpenVolume: write verify disabled 4294769566 PID:6fede23e TID:6fee3fd2 0x8fede000: FATFS!OpenVolume: extra FAT on format disabled 4294769576 PID:6fede23e TID:6fee3fd2 0x8fede000: FATFS!OpenVolume: force write through enabled Tag: USB memory size Tag: 53582
  - 7
    - tcpipc.dll - cemgrc.exe - cetlstub.dll ; Where to download ? I need these files for a x86 CEPC to be able to remote debug, view processes etc... I can't find these neither in the platform builder folders nor in the evc++4.0 folders. It seems that I used to see these files when I used to program with evc++3.0 but I'm not sure. Would I have to install evc++3.0 to get these ? thanks Tag: USB memory size Tag: 53581
  - 8
    - Mapping register Hi I'm trying to map some registers in the oeminit table but it doesn't seem to work. In the OEMAdressTable, I put dd 80000000h, 0, 01E00000h // my 31Mo of RAM dd 82000000h, 084C6000h, 0000000Ch // the registers I want to have a look at In my driver to read the registers, I wrote __asm { xor eax, eax mov esi,082000000h mov eax, [esi] mov value, eax }; But when I execute the code, it yields an exception when coming to the line mov eax, [esi]... Can somebody help me???? Cause I not so familiar with asm and I can't figure out whether it's an asm problem or a mapping problem. Thanks Tom Tag: USB memory size Tag: 53578
  - 9
    - difficulties with a PCM-5823 board & network Hello, I have a problem concerning my Win CE 4.2 image. It runs on a PCM-5823 board with Realtek network chips. However, I cannot connect to our network. It seems that the networkchips are not recognized (if I execute "ipconfig" in the command line interface it says "No IPv4 adapter found.". I made sure that the chips are activated and that the network functionality is included in the image. I tried to find a driver for the network chips (RTL 8139c) but I couldn't find one. Did anyone of you also face such difficulties? If yes... how did you solve it? Thanks for your help. M. Traub Tag: USB memory size Tag: 53577
  - 10
    - anyone can help, image cannot start. i usr the smdk2410 bsp in pb42, and config as handheld device. after use eboot's to format the nand as binfs type, the image print out these and stopped. it seems fail in the filesys.exe run. who can tell me what these. the device i use has a 32M nand. Loaded symbols for 'D:\WINCE420\PUBLIC\PG619\RELDIR\SAMSUNG_SMDK2410_ARMV4DEBUG\COREDLL.DLL' 4294767516 PID:6fede23e TID:6fee3fd2 0x8fede000: >>> Loading module filesys.exe at address 0x04010000-0x0408A000 Loaded symbols for 'D:\WINCE420\PUBLIC\PG619\RELDIR\SAMSUNG_SMDK2410_ARMV4DEBUG\FILESYS.EXE' 4294767536 PID:6fede23e TID:6fee3fd2 0x8fede000: FileSystem Starting - starting with clean file system 4294767546 PID:6fede23e TID:6fee3fd2 0x8fede000: OEMSetRealTime: Year: 2003, 4294767556 PID:6fede23e TID:6fee3fd2 0x8fede000: OEMSetRealTime(register): 0x8fede000: >>> Loading module fsdmgr.dll at address 0x03D00000-0x03D1C000 (RW data at 0x01FDC000-0x01FDC754) Loaded symbols for 'D:\WINCE420\PUBLIC\PG619\RELDIR\SAMSUNG_SMDK2410_ARMV4DEBUG\FSDMGR.DLL' 4294768916 PID:6fede23e TID:6fee3fd2 0x8fede000: >>> Loading module flashdrv.dll at address 0x027F0000-0x02804000 (RW data at 0x01E4F000-0x01E4FAF4) Loaded symbols for 'D:\WINCE420\PUBLIC\PG619\RELDIR\SAMSUNG_SMDK2410_ARMV4DEBUG\FLASHDRV.DLL' 4294768936 PID:6fede23e TID:6fee3fd2 0x8fede000: FMD::FMD_Init 4294768946 PID:6fede23e TID:6fee3fd2 0x8fede000: FLASHDRV.DLL:BuildupMappingInfo() - Enter. 4294768956 PID:6fede23e TID:6fee3fd2 0x8fede000: FLASHDRV.DLL:L2P_GetPhysicalSectorAddr() - Secondary table doesn't exist for logical sector 0x0!!! 4294768966 PID:6fede23e TID:6fee3fd2 0x8fede000: FLASHDRV.DLL:L2P_GetPhysicalSectorAddr() - Secondary table doesn't exist for logical sector 0x400!!! 4294768986 PID:6fede23e TID:6fee3fd2 0x8fede000: FLASHDRV.DLL:L2P_GetPhysicalSectorAddr() - Secondary table doesn't exist for logical sector 0x800!!! 4294768996 PID:6fede23e TID:6fee3fd2 0x8fede000: FLASHDRV.DLL:L2P_GetPhysicalSectorAddr() - Secondary table doesn't exist for logical sector 0xc00!!! 4294769016 PID:6fede23e TID:6fee3fd2 0x8fede000: FLASHDRV.DLL:L2P_GetPhysicalSectorAddr() - Secondary table doesn't exist for logical sector 0x1000!!! 4294769026 PID:6fede23e TID:6fee3fd2 0x8fede000: FLASHDRV.DLL:L2P_GetPhysicalSectorAddr() - Secondary table doesn't exist for logical sector 0x1400!!! Tag: USB memory size Tag: 53575
  - 11
    - Change or Remove default applet in PPC Hi, There are many default control panel applets in PPC. How can I remove it if I don't need some one (Contrast)? How can I replace it if I don't like some one (Backlight)? Thanks. Yu. Tag: USB memory size Tag: 53574
  - 12
    - About bluetooth This is a multi-part message in MIME format. ------=_NextPart_000_0016_01C45841.B1A6E580 Content-Type: text/plain; charset="gb2312" Content-Transfer-Encoding: quoted-printable Hi,all: My device has a UART-Bluetooth module,in PB4.2,I added "Bluetooth = with Universal Loadable Drivers" to my workspace,and in file = project.reg,I added these messages: [HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Debug] "mask"=3Ddword:ffffffff "console"=3Ddword:0 [HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Transports\Builtin\1] "driver"=3D"bthuart.dll" "flags"=3Ddword:4 "name"=3D"COM5:" "baud"=3Ddword:1c200 "resetdelay"=3Ddword:1388 Then the Bluetooht module can run smoothly,it can communicate with = other bluetooth device.but all that is under the debug mode.when I built = a retail image with the same settings. the bluetooth module can't work = at all.I got the error messages:"Bluetooth error,bluetooth hardware = error 10050,controller isn't exist!",who can tell me that is why?why it = can run under debug mode but not retail mode? Thanks a lot. Best Regards! ------=_NextPart_000_0016_01C45841.B1A6E580 Content-Type: text/html; charset="gb2312" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; charset=3Dgb2312"> <META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff> <DIV><FONT size=3D2>Hi,all:</FONT></DIV> <DIV><FONT size=3D2>    My device has a UART-Bluetooth=20 module,in PB4.2,I added "Bluetooth with Universal Loadable Drivers" = to my=20 workspace,and in file project.reg,I added these messages:</FONT></DIV> <DIV><FONT=20 size=3D2>[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Debug]<BR>&nbsp= ;  =20 "mask"=3Ddword:ffffffff<BR>    = "console"=3Ddword:0</FONT></DIV> <DIV><FONT size=3D2></FONT> </DIV> <DIV><FONT=20 size=3D2>[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Transports\Buil= tin\1]<BR>   =20 "driver"=3D"bthuart.dll"<BR>   =20 "flags"=3Ddword:4<BR>    = "name"=3D"COM5:"<BR>   =20 "baud"=3Ddword:1c200<BR>   =20 "resetdelay"=3Ddword:1388<BR>    Then the Bluetooht = module can run=20 smoothly,it can communicate with other bluetooth device.but = all that is=20 under the debug mode.when I built a retail image with the same settings. = the=20 bluetooth module can't work at all.I got the error messages:"Bluetooth=20 error,bluetooth hardware error 10050,controller isn't exist!",who can = tell me=20 that is why?why it can run under debug mode but not retail = mode?</FONT></DIV> <DIV><FONT size=3D2>   Thanks a lot.</FONT></DIV> <DIV><FONT size=3D2>   Best = Regards!</FONT></DIV></BODY></HTML> ------=_NextPart_000_0016_01C45841.B1A6E580-- Tag: USB memory size Tag: 53573
  - 13
    - help me hi all, i would like to know how can i access files @ host from appalications running @ target? Tag: USB memory size Tag: 53571
  - 14
    - NDIS WAN IM for WinCE Hello all, This is my first time on this board as I believe I have come across a stump regarding this project I am working on. My situation is this. I have succesfully ported over passthru for WinCE(in this case for Pocket PC). And my IM driver is succesfully able to 'passthru' packets on the upper edge(TCPIP protocol) and the loweredge drivers(ethernet card). My problem is I want to bind my driver between PPP and AsyncMac on the PPC. I ended up creating a new IM driver to handle the WAN interface of NDIS. I have succesfully sandwich myself between PPP and AsyncMac but when PPP sends a packet and my WANSendHandler is called I am not sure what to do next? Should I go ahead and repackage the NDIS_WAN_PACKET into a NDIS_PACKET and call NdisSend to AsyncMac? If so, how is this properly done? I do not consider myself a expert on NDIS as I am still new to this but any help would be greatly appreciated. Thanks Tag: USB memory size Tag: 53558
  - 15
    - CEDB: Design advise about OID handling when using ReplOpenSync Hello, For a given customer with tough requirements and given hardware design I would like some help in choosing the best solution. I have a CEDB (requirement) which I use almost as a relational database, using "keys" (OIDs to point out other OIDS in the database). My basic question is how I can keep a backup of that database and still persist the OIDs. My scenario is that I have a CEDB volume on an external storage card (FAT, requirement). A user can remove the card at any time (requirement), so I cannot use the DB directly on the storage card (user would remove the card and applications would break..). Instead I copy the volume file during boot to a RAM disk, and open it from there. Several applications can open the DB and I need to persist any changes made to the storage card (if the user has removed the storage card changes may be lost, but at least nothing crashes). Since several applications might have opened the DB file from the RAM disk I cannot simply copy the DB volume file from RAM disk to SD card as it changes, since I cannot take a consistent snapshot of the file (right? An application could in theory change it while I'm writing it to disk). Therefore I'd like to keep a second copy of the DB in RAM that I keep updated with counter-based replication (ReplOpenSync). Any changes to the first DB would be replicated to the second copy. The second copy would only be opened by "me" in a driver, thus I could close that DB file and make a controlled consistent working backup to the storage card. So basically I'm looking for a CEDB function like "CeMakeBackupToFile(LPCWSTR filename);" :-) Of course any feedback or better suggestions are more than welcome. Thanks in advance, Mattias Tag: USB memory size Tag: 53555
  - 16
    - CEDB: File size not decreased when deleteing records? Hello, I wonder about the CEDB behaviour when deleting records from a DB file (volume). If I add lots of records to a CEDB, then delete those records and close the file, it seems like the file size isn't changed after I've deleted all items. Shouldn't the file size be decreased after the records have been deleted again? What is the expected behaviour? Thanks in advance //Mattias Tag: USB memory size Tag: 53553
  - 17
    - LOADIND DLLS hI, we launch two processes (.EXE links with a common DLL). The Dll is loaded twice. How avoid this and load only one instance of the the DLL? Thanks for your help. Steve Tag: USB memory size Tag: 53552
  - 18
    - Formatting CF device (CE 4.2) Hi All, I am using Platform Builder 4.2. I have a problem trying to programmatically format a compact flash card from my CE device. When I try to get a handle to the device with CreateFile and a device name of "\\Compact Flash2\\Vol:" I get a last error code of 123 (File name, directory name or volume label syntax is incorrect), if I try any other name I get error code 2 or 3 (path/file not found). As far as I can see I'm following what's in MSDN and the CE/EVC help files; any idea what I'm doing wrong? Many Thanks, Martin. Code snippet (irrelevant stuff removed): DeviceName = _T("\\Compact Flash2\\Vol:"); DeviceHandle = CreateFile( DeviceName, GENERIC_READ|GENERIC_WRITE, 0, NULL, OPEN_EXISTING, 0, NULL ); Error = GetLastError(); Tag: USB memory size Tag: 53543
  - 19
    - error message? Hi all I worked to pxa263 target and wince.net4.2. My problem is happened to connect to PC with activesync. Error message is following "Can not conect to PC . No Program Memory available. Stop some programs,and try again..." My image size is small.(almost 15 Mbytes) Please reply to some hint. Thanks in advance. Tag: USB memory size Tag: 53542
  - 20
    - About socket() Hello, I am trying to perform my socket software. I load and do step execution of the program. A program is as follows. : : i = WSAStartup(wVersionRequested, &wsaData); s = socket( AF_INET, SOCK_DGRAM, 0 ); : : It stops, when socket function is performed exactly. A stop place is as follows. [.../NK/KERNEL/objdisp.c] RETADDR ObjectCall (POBJCALLSTRUCT pobs) { : : if ((inx = iMethod>>HANDLE_SHIFT & HANDLE_MASK) >= NUM_SYS_HANDLES || (pci = SystemAPISets[inx]) == 0) { DEBUGMSG(1, (TEXT("ObjectCall: Failed(1): %lx\r\n"), inx)); RaiseException(STATUS_INVALID_SYSTEM_SERVICE, EXCEPTION_NONCONTINUABLE, 1, &iMethod); => DEBUGCHK(0); /* shouldn't get here */ } : : The cause is because inx is set to 0x13 and SystemAPISets[inx] is 0. (iMethod is 0x131C.) The loaded module is as follows. Windows CE>gi mod MOD: Name pModule :dwInUSE :dwVMBase:CurZone M00: ceddk.dll 83c62348 00000008 03df0000 00000000 M01: coredll.dll 83cb42a0 0000000f 03f60000 00000000 M02: fsdmgr.dll 83c9f718 00000002 03e70000 00000000 M03: kd.dll 83cb74d4 00000001 80166000 00000000 M04: ndis.dll 83c550d8 00000008 03b90000 0000c001 M05: pm.dll 83c6c544 00000008 03f40000 00000007 M06: regenum.dll 83c62e70 00000008 03f50000 00000000 M07: relfsd.dll 83c88e6c 00000002 03ee0000 0000000c M08: toolhelp.dll 83c7c4a8 00000004 03ed0000 00000000 M09: wavedev.dll 83c4bec8 00000008 031a0000 0000c000 Windows CE> Please let me know the factor which such a phenomenon generates. Thanks in advance. Yamada Tag: USB memory size Tag: 53538
  - 21
    - How to copy the new OS image into ROM to repalce the old OS image? Dear, I have created a new OS image. How can I replace the touch panel's existing OS image with my new OS image? Thanks. Lilian Tag: USB memory size Tag: 53537
  - 22
    - PB4.2 Builder fault - IE TVLens + HTML Application support All, I have just spent a considerable amount of time with a quite simple problem. Now I know about it. Within my workspace image I require IE HTML Application support (SYSGEN_MSHTML_HTMLAPP) which allows the execution .HTA files under Windows CE. I also require the IE TV-Style Navigation support (TVLENS_ALL) but if I add this or one of the components which makeup this the image looses it understanding of the .HTA file. As I said I've spent a considerable amount of time tracking this down and have been unable to find a build solution. The issue seems to be within the SYSGEN IE phase of the build and the CECONFIG.H gets built with the MSHTML_HTMLAPP define. So you get the MSHTA.EXE but it does not know how to parse or process the file. The other interesting thing that I did try is to force the relevant registry entries into the platform reg from ie.reg but the image does not give an unknown file error but still does not work. Any help or suggestion of a fix would be most appreciated. Nigel Goodyear Intrinsyc Europe Ltd Tag: USB memory size Tag: 53536
  - 23
    - How to add touchp.dll into touch screen? Dear, Project menu>Insert>Existing ProjectI have downloaded touch panel driver-Windows CE.NET(RS232) from http://www.egalax.com.tw/Current/WinCE.NET_X86_RS232_1.0.1.2102%20A.zip. The downloaded zip file consists 3 files: Calibration.exe; TOUCH.DLL; RegistrySettingFor232.txt I have tried the steps below: 1) I goto Project menu>Insert>Existing Project> I add the TOUCHP.dll. TOUCHP.DLL appears in user features folder. 2) I open project.reg and add in the following setting: [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH] "DriverName"="Touchp.dll" "CalibrationData"="102,102 1945,102 1945,1945 102,1945" "COMM"="COM1:" "BCLEFT"=dword:64 "BCRIGHT"=dword:64 "BCTOP"=dword:64 "BCBOTTOM"=dword:64 3) I Built Platform, 1 warning shows below: Warning: Using old fixup style in module TOUCHP.DLL TESTPLATFORM03 - 0 error(s), 1 warning(s) Eventhough I succesfully download the image into touch screen, but the touch function still not work in the touch screen. Why? Am I doing anything wrong? Thanks! Best Regards, Lilian Tag: USB memory size Tag: 53534
  - 24
    - usbd.lib not found I installed eMbedded Visual Tools 3.0 - 2002 Edition along with the PocketPC2002 SDK. And I want to compile a usb driver project that uses usbd.lib. But this library cannot be found on my PC. What can I do? Best regrads, Julius. Tag: USB memory size Tag: 53533
  - 25
    - Adding a Dialog Box into a LIB File Dear all, I am trying to customize the btenum.cxx from Platform Builder 4.2 so it will display a dialog box when performing an action. Previously this btenum.lib does not contains any dialog box or resource in it. So I created my own resource.h and btenum.rc and add into the btenum folder. For testing purpose, actually it is just a simple about dialog box with a label and an OK button. Then I modify the sources file as follow: ////////////////////////////////////////////////////////////////////////// TARGETNAME=btenum TARGETTYPE=LIBRARY RELEASETYPE=OAK COPYRES=1 TARGETDEFNAME=$(TARGETNAME) WINCETARGETFILES=$(_RELEASELIBDIR)\$(TARGETNAME).res SOURCES=btenum.cxx btenum.rc ////////////////////////////////////////////////////////////////////////// For the resoure.h I created, I define the IDD_DIALOG as 101, IDD_LABEL as 1000 and IDD_BUTTON as 1001. I successfully compile it with no errors and no warnings. But when I try to run it, it will show "GetLastError = 1814" when reach the part where the code is trying to call out the dialog box. I have checked out that 1814 means "The specified resource name cannot be found in the image file." But I am not sure what I did wrong here. Anybody out there tried to add dialog box to lib file before? Any idea? What is the correct way to do this? Thanks in advanced for your help. Best Regards, Candy Tag: USB memory size Tag: 53530

Hi

We are using S3C2410 (ARM920T) processor with WinCE4.1
and processor is supporting USB1.1.
System is able to detect the 128MB USB memory device. But
could not detect 256MB.
Could anyone help me.

Kumar

Top