How to make viewers display contents embedded in web page ?

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - USB deadlock ? We have been trying to track down a 'hang' bug on our platform and have possibly narrowed it down to the UHCI driver. We have stress tests running simultaneously on 3 serial ports, 2 network ports, the IDE/compact flash interface and the USB driver. The only time the test fails is if we assign the USB host and interrupt (effectively 'enabling' the USB test, test does not start on USB if not running). By 'fail' I mean complete hang of board/OS, no ping, no mouse, etc. Naturally, when running the kernel debugger, the timing changes such that the stress tests never fail :( Is this a known issue ? Any one else have this problem ? Given other problems we have had with the USB driver (arbitrary reset timeouts and such in the driver that have to change based on using a hub or not) and the fact the stress tests running continuously w/out USB this is the current area of suspicion. CE.NET 4.2 All QFEs applied Intel PIII w/chipset (UCHI) Thanks for any heads up, Jason Tag: How to make viewers display contents embedded in web page ? Tag: 56144
  - 2
    - Extended characters don't consistantly show On CE v4.10 ARM OS with USA locale, I'm seeing inconsistent output when I try to display characters 0x80 to 0x9F with the Wingdings font. I have written an application that works fine on W2K. On CE, my same application doesn't show all of the characters correctly (rectangles), but some in this range do show correctly (e.g. 0x81, 0x8D, 0x8F, and 0x90 are OK). I see the same thing when I created a web page to show this range of characters. Looks good in W2K, but not in CE's PIE. I then created a Word doc with this character range. Looks OK on W2K and also looks correct on CE Word Viewer. I do have the Wingdings font installed on the CE unit. What is Word viewer doing differently that makes it work correctly? I've tried both DrawText() and ExtTextOut() APIs. I've also tried variations of creating the font and attaching it to the CDC. Tag: How to make viewers display contents embedded in web page ? Tag: 56141
  - 3
    - EDB9315 serial Activesync Hi, all, I understand that many have asked questions regarding the serial activesync. Unfortunately, I still can not get the serial Activesync working for my Cirrus EDB9315. Hope you can help me here. My problem is that I can not select Direct Connection from Make New Connection. I have included the following feature in a Mobile Handheld platform: EP931x Serial Port, Serial Mouse Driver(Anchored for EP931x), ActiveSync with File Sync, Dial Up Networking with AutoDial, TAPI with Unimodem, Serial Port Support I think there are 2 problems here. 1) Serial Mouse Driver I heard that serial activesync requires full UART port, right? If that's the case, I have to remove Serial Mouse Driver. (UART1 is the only full UART port for EP9315.) However, Serial Mouse Driver is an anchored feature for EP931x. Everytime I delete it, it comes back up. I thought I can remove this option in mybsp.bat and I can't find a file like this in EP931x. I searched the string BSP_EP931X_SERMOUSE and I could only find ep931x.cec, the sources file, platform.bib and platform.reg. I tried to remove the Environment Variable of this driver. But it is restored everytime. How can I remove this feature? 2) Direct Connection I thought I should be able to select Make New Connectin -> Direct Connection even though UART1 is occupied. But this option is grayed out. Only Dial-Up Connection can be selected. I looked into the bebug output and I found these error: DEVICE!NotifyDevice IsAPIReady(SH_WMGR i.e. GWES) returned FALSE, not calling CeEventHasOccurred (/ADD WAV1) DEVICE!NotifyDevice IsAPIReady(SH_WMGR i.e. GWES) returned FALSE, not calling CeEventHasOccurred (/ADD COM1) DEVICE!NotifyDevice IsAPIReady(SH_WMGR i.e. GWES) returned FALSE, not calling CeEventHasOccurred (/ADD COM2) Is this the reason why Direction Connection grayed out? Thanks a lot! Derek Tag: How to make viewers display contents embedded in web page ? Tag: 56135
  - 4
    - DiskOnChip 2000 In Windows CE 5.0 Does Windows CE 5.0 still have support for DiskOnChip 2000 flash devices? M-Systems lists Windows CE 5.0 in their compatibility list which can be found here: http://www.m-systems.com/files/documentation/doc/OSCompatibility_Rev_2.4.pdf but, this link: http://msdn.microsoft.com/library/default.asp?url=/library/en-us/wcedata5/html/wce50orifilesystemsdatastoremigration.asp clams that "Effective with Windows CE .NET 4.2, M-Systems TrueFFS is no longer supported in Windows CE. " I can't find any more information on the topic from neither M-Systems or Microsoft. I've called M-Systems tech support, but they won't answer the phone. Regards, George McCollister NovaTech LLC Tag: How to make viewers display contents embedded in web page ? Tag: 56134
  - 5
    - Wordpad hangs machine when reading disk based text file Hello. I have been working on building an image for a NS Geode Advantech SBC (PCM-3350). I am presently able to use the Ethernet, Serial Ports, parallel port and the hard drive attached. When I try to load a text file into Wordpad, the platform hangs. I think this is related to the hard disk driver. When I open a file over a network, it works fine. Any ideas? Thanks, Brian Tag: How to make viewers display contents embedded in web page ? Tag: 56133
  - 6
    - ftpd credentials Hello, is there some brave guy who could explain how to add the passwords for the users of a ftpd server in wince4.2? I added the users in the subkey: hkey_local_machine/comm/ftpd and I set to 1 the key UseAuthentication. Thanks for the help, Luca Tag: How to make viewers display contents embedded in web page ? Tag: 56118
  - 7
    - IRSIR IrDA driver in windows CE 4.2 Hi, We have added IRSIR driver into our platform from platform builder 4.2. There are some registry entries has been added into the platform.reg. In that entries we have selected the internal IR and changed the port no. After that we build the platform , it creates both the irdastack and irsir dlls. when we were loading this platform, we were able to see that, irsir has been loaded. But when we run any of the IrSock programs, the communication is not happening with another IRDA device. Actually whenever we are making the irsock calls, irsir driver is getting the calls, but actual communication is not happening. In my platform.reg, we are able to see the following registry entries, IF BSP_NOSIR ! [HKEY_LOCAL_MACHINE\Comm\IrDA\Linkage] "Bind"=multi_sz:"Irsir1" [HKEY_LOCAL_MACHINE\Comm\Irsir] "DisplayName"=LOC_DISPLAYNAME_IRSIR "Group"="NDIS" "ImagePath"="irsir.dll" [HKEY_LOCAL_MACHINE\Comm\Irsir\Linkage] "Route"=multi_sz:"Irsir1" [HKEY_LOCAL_MACHINE\Comm\Irsir1\Parms] "BusNumber"=dword:0 "BusType"=dword:0 "Port"=dword:5 ; 0 = Use external dongle, 1 = Use internal IR "IntIR"=dword:1 ; 0 - internal transceiver, 1 - Extended Systems JetEye dongle. "TransceiverType"=dword:0 "DisablePowerManagement"=dword:1 "Baud"=dword:3F ENDIF BSP_NOSIR ! We are not seeing any entries from [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\IRDA] location. Is it necessary to have some entries like this or not? Is there any sample program available for testing irsir driver? What are the possiblities for irsir not to work ? Thanks in Advance, Regs, Ravindran. Tag: How to make viewers display contents embedded in web page ? Tag: 56106
  - 8
    - IRSIR IrDA driver in windows CE 4.2 Hi, We have added IRSIR driver into our platform from platform builder 4.2. There are some registry entries has been added into the platform.reg. In that entries we have selected the internal IR and changed the port no. After that we build the platform , it creates both the irdastack and irsir dlls. when we were loading this platform, we were able to see that, irsir has been loaded. But when we run any of the IrSock programs, the communication is not happening with another IRDA device. Actually whenever we are making the irsock calls, irsir driver is getting the calls, but actual communication is not happening. In my platform.reg, we are able to see the following registry entries, IF BSP_NOSIR ! [HKEY_LOCAL_MACHINE\Comm\IrDA\Linkage] "Bind"=multi_sz:"Irsir1" [HKEY_LOCAL_MACHINE\Comm\Irsir] "DisplayName"=LOC_DISPLAYNAME_IRSIR "Group"="NDIS" "ImagePath"="irsir.dll" [HKEY_LOCAL_MACHINE\Comm\Irsir\Linkage] "Route"=multi_sz:"Irsir1" [HKEY_LOCAL_MACHINE\Comm\Irsir1\Parms] "BusNumber"=dword:0 "BusType"=dword:0 "Port"=dword:5 ; 0 = Use external dongle, 1 = Use internal IR "IntIR"=dword:1 ; 0 - internal transceiver, 1 - Extended Systems JetEye dongle. "TransceiverType"=dword:0 "DisablePowerManagement"=dword:1 "Baud"=dword:3F ENDIF BSP_NOSIR ! We are not seeing any entries from [HKEY_LOCAL_MACHINE\Drivers\IRDA] location. Is it necessary to have some entries like this or not? Is there any sample program available for testing irsir driver? What are the possiblities for irsir not to work ? Thanks in Advance, Regs, Ravindran. Tag: How to make viewers display contents embedded in web page ? Tag: 56105
  - 9
    - [Q]: Access Key & Permissions Hi all, What is the differnce between Acess Key & Process permissions ? Or there is no difference ? kindly clarify... Moreover, msdn states Acess key in Process window & thread window, is there any difference between them, as the values read are different. regards sajid Tag: How to make viewers display contents embedded in web page ? Tag: 56102
  - 10
    - [Q]: DLL load Hi all, What are the changes that needs to be done to load the DLL during runtime [in registry], i.e., when an application using this DLL is run ? presently my DLL is getting loaded at boot up time. I would like to postpone this DLL load at runtime. regards sajid Tag: How to make viewers display contents embedded in web page ? Tag: 56099
  - 11
    - DirectX Hi all, I want to know how to display video data of overlay region through DirectX. If you allow, would you like to give me some info about this issue? Thanks. Tag: How to make viewers display contents embedded in web page ? Tag: 56097
  - 12
    - AVI Playback in 4.2 Alright, I've searched the archives and come up with nothing (well one thread, but it didn't have a solution). I have an AVI that plays fine on CE 4.1, though I didn't create that 4.1 image. I'm now trying to create a 4.2 build that will play the file on the exact same piece of hardware, but I keep getting a failure saying it doesn't have a codec for it. I created a platform from the "custom device" start and included eveything under the Basic Multimedia and Multimedia sections. I've double checked that everything in the Catalog that has anything to do with media, sound or DirectX is included. I've conpared the winceconfig.h and ce.bib files of the two platforms, and I really don't see anything media related that is different between the two platforms. The new platform will play MPG and WMV files just fine. So after all that, here's the question: What could be the cause of this? Has something changed for AVI codec support between CE 4.1 and 4.2? -Chris Tag: How to make viewers display contents embedded in web page ? Tag: 56094
  - 13
    - Debugging Bootloader From Emulator I'm debugging a bootloader for a PXA255 based system and have run into a problem getting the PDB files for the bootloader to be downloaded. Apparently PB when it connects to a EXDI based emulator sends the name and path of a PDB file for the Win CE image for that particular platform. When I connect to the emulator I see in the PB debugger that the NK.EXE module (i.e. the whole Win CE image) is loaded along with the associated PDB file. Is there any way to change this name to point to my bootloader instead of the _FLATRELEASEDIR ? Since the bootloader has to be named NK.EXE also for ROMIMAGE to relocate it (otherwise "pTOC" is not fixedup properly) I can't just change the SOURCES file for the bootloader to point to the flat release directory. I tried to delete the NK stuff from the release directory and copy in the bootloader ones and for some reason PB can not connect to the emulator. Thanks for the help! Tag: How to make viewers display contents embedded in web page ? Tag: 56080
  - 14
    - Help-Me Hi, I am a new CE Developer, and I need some helps... Please some body can help me?? Sorry about my english. I have the follow problem - I want to add in my CE image a Citrix Client, and I already added all files in: ; ; Copyright (c) Microsoft Corporation. All rights reserved. ; ; ; Use of this source code is subject to the terms of the Microsoft end-user ; license agreement (EULA) under which you licensed this SOFTWARE PRODUCT. ; If you did not accept the terms of the EULA, you are not authorized to use ; this source code. For a copy of the EULA, please see the LICENSE.RTF on your ; install media. ; MODULES ; Name Path Memory Type ; -------------- --------------------------------------------- ----------- minhaaplic.exe $(_FLATRELEASEDIR)\MyApp.exe NK but when i tested the image i tryed to do a connection and the ICA Client didnt appers on ComboBox... I am using a Windows Thin Client Shell. Please help-me Thanks... Tag: How to make viewers display contents embedded in web page ? Tag: 56076
  - 15
    - File remove problem Hi, I've gotten the filesystem under my install of the CE 5.0 evaluation version messed up pretty seriously and need a pointer on what to do about it. The install is on an NTFS volume, which is not the boot volume, if that helps. The OS is Windows XP SP1. The problem shows up where there is a file, 1251.txt, say, in \Wince500\PBWorkspaces\PGTWorkspace\RelDir\Emulator_x86_Debug. I cannot delete this file. Windows XP says that access is denied, etc., the file is in use and that I should make sure it's not read-only and that no one is using it. There's nothing running that would be using it. The file properties do not show Read Only being set. The same problem appears to be the case for *every* file in the \Wince500 directory. I can't create new folders under that folder, or delete files that are already present. Other parts of the volume seem fine (I can create and delete files in other directories, except \WinCE500). I have run chkdsk on this volume. Note that it won't run from the graphical UI, as it says that there are system files that can't be accessed except during startup because they are in use. In any case, when it runs no errors are shown, but the files are still inaccessible when XP boots after chkdsk. I did a few things on Friday that I suppose might have left things in a bad state, if there is a bug or very odd behavior in the OS, but I don't know what to do about it. I shared the WinCE500 folder within our workgroup (read-only). I then moved one of the PB projects in the workspace mentioned above from the workspace directory to the OTHERS folder. I also copied that folder to a remote system, too. Later, I copied another of the projects in the workspace to the same remote computer. I have no persistent network connections to this WinCE500 share, however and don't seem to have anything on the remote machine which might be a copy of a hard link or a copy of a file to which PB might have built a hard link during OS build. I'm baffled. I can't even delete the WinCE500 folder to start over! Paul T. Tag: How to make viewers display contents embedded in web page ? Tag: 56070
  - 16
    - file system filter for RAM file system - CE 4.1 ? Hello experts, we came across a customer, who absolutely wishes to to see no files or folders under Windows CE 4.1, when he/she/they use a Open... command in Internet Explorer, or another similar application. We had put MountFlags=1 for the solid state disk properties in platform registry to make that partition hidden, so local persistent storage is not showing up. However, the RAM file system is still there (and customer not happy). It is my understanding that neither MountFlags action nor File System Filter would work on RAM file system. Is this correct or not ? Any method to hide both RAM and flash disk file systems under CE 4.1 ? Sincerely Sergei Tag: How to make viewers display contents embedded in web page ? Tag: 56057
  - 17
    - About Interrupt function Hi all, I am searching interrupt function to connect IRQ as "InterruptConncet()" of Besquare(WinCE3.0). Is it exist at WinCE420? Thanks. Tag: How to make viewers display contents embedded in web page ? Tag: 56048
  - 18
    - platform builder 5.0 and 4.1 on same OS and same drive Can I install Window CE 5.0 and Windows CE 4.1 .NET on same OS and also same drive.? thanks Tag: How to make viewers display contents embedded in web page ? Tag: 56046
  - 19
    - Ceplayer (media player) + WAV files I have a strange problem, my ceplayer on the CE 4.2 platform plays mp3 files, but no WAV files. A messagebox is displayed when I double-click a WAV file: Cannot open '\test.wav'. Please verify that the path and filename are correct and try again (0x80004001) The wav files are in the same dir as the mp3 files and have the same access rights. This is strange, certainly because I can play WAV files under the control panel via the 'Volume & Sounds' applet, and under eVC using the PlaySound API. Maybe I have a broken registry key? Maybe I have forgotten to set a SYSGEN_ (most unlikely, but here are the ones I do have set: SYSGEN_AUDIO=1 SYSGEN_CEPLAYER=1 SYSGEN_LOCAL_AUDIO=1 SYSGEN_STREAM_AUDIO=1 ) PS No Directx sysgens are included in my image, but that is also not necessary to play WAV files in CePlayer, I presume. Tag: How to make viewers display contents embedded in web page ? Tag: 56044
  - 20
    - how to share file how to share file in windows ce.I can find any menu about file share. Tag: How to make viewers display contents embedded in web page ? Tag: 56042
  - 21
    - HIVE registry problem in SMDK2410. hi everyone: i select the hive based registry component, after running the wince, it print in serial of this and hanged up. OEMInit Done... Sp=ffffc7cc OEMSetRealTime i guess that wince fails to find the external filesystem's HIVE registry file. in the build output: regcomp: writing registry hive (\WINCE420\PUBLIC..\RelDir\SAMSUN~2\default.hv)... regcomp: writing registry hive (\WINCE420\PUBLIC..\RelDir\SAMSUN~2\boot.hv)... regcomp: writing registry hive (\WINCE420\PUBLIC..\RelDir\SAMSUN~2\user.hv)... but i cannot find the three *.hv file on the \RelDir\..release. eithe the system.hv can anyone tell me, why these is no such files output, i think i should put the system.hv on the external filesystem, is it right? Tag: How to make viewers display contents embedded in web page ? Tag: 56036
  - 22
    - Problems with serial downloader for ARM926 CPU Hi all, Environment: WinCE V4.2 evaluation version....!! , DM320 (ARM926 Core) 105 MHz custom target I have ported the SBOOT code from CEPC source to the ARM4I target. Our target has two serial ports(UART 0 and UART 1), so I am using one as a debug output(UART 1) and the other for the connection to the Platform Builder PC.(UART 0) When I attempt a download, the PC and the target, the PB waits for a BOOT ME packet infinitely. also, there is not much documentation is there in Documentation also, about the implementation. also about the Trivial File Transfer Protocol which is there needed, from the client side, but all the calls inside, it makes to the eboot functions.., but I don't have an Ethernet port... so I have two questions, 1.how do I implement the TFTP for a serial port? the sending of boot me packet to the PB. The configuration for my serial Target connection.. PORT: COM1 Baud Rate : 115200 Flow Control : None Data Bits : 8 Parity : None Stop Bits : 1 any more suggestions? do I need to install the QFE for the same? Tag: How to make viewers display contents embedded in web page ? Tag: 56035
  - 23
    - [Q]: Permissions Hi all, Is SetProcPermissions(-1) equivalent to Full Kernel Mode operation ? Can anyone detail on the permission bitmask of threads in WinCE, i.e., how does it help in setting permissions of threads ? regards sajid Tag: How to make viewers display contents embedded in web page ? Tag: 56031
  - 24
    - mount extern filesystem hi all: am trying to mounting an external file system as root in these two days, but failed. the process is below: i used the SMDK2410 bsp, and have a NAND and usb host on my device. 1. i try mount NAND as external file system, so i add this flag in [HKEY_.....\Profiles\FlashDrv] and [HKEY_.....\Profiles\FlashDrv\FATFS] "MountFlags"=dword:4, it failed. the same as the value C, or E , "MountFlags"=dword:C, "MountFlags"=dword:E . it is just mount usually, just in the /root and is the /NAND flash. 2. then want to mount the usb flash disk, so add flag in [HKEY_.....\Profiles\USBHDProfile ] and [HKEY_.....\Profiles\USBHDProfile\FATFS] "MountFlags"=dword:4, it failed. the same as the value C, or E , "MountFlags"=dword:C, "MountFlags"=dword:E . it as no change to the usb disk. ce act as usually, "\windows" in the root and "\harddisk" also in the root, though there is files in the usb. can any body tell me if it is the right change? From the msdn doc, it said do these only,right? why dont it works? thanks. Tag: How to make viewers display contents embedded in web page ? Tag: 56029
  - 25
    - How to share a mutex/event between OAL and driver? Hello all, I'd like to implement OEMWriteDebugString so that it writes to a memory buffer. Then a driver to read from the same buffer and write to a file on disk. I don't have any serial port to output to and store the debug messages, that's why I want this solution. How can I implement this? As I understand I would need to synchronize access to the buffer, and I guess a mutex would do. I know how to use a mutex between two processes in user mode, but how can I do this from OAL? Can I simply use CreateMutex from OAL? I guess I also need to signal an event from OEMWriteDebugString to tell the driver that there is data available in the buffer. How can I share a named event between OAL and a driver? Can I simply use CreateEvent from OAL? As an alternative I could maybe read data from OEMIoControl. Is access to OEMIoControl synchronized in any way, or do I need to synchronize (if needed)? I hope anyone can shed a light on this. Best Regards, Ron Tag: How to make viewers display contents embedded in web page ? Tag: 56028
- Next
  - 1
    - SDIO Bluetooth in WinCE 5.0 Does anyone know whether the SDIO Type-A Bluetooth driver (bthsdio) in WinCE 5.0 will work with Type-B card such as one from Socket Comm? The SD specification says Type-B card can execute either the Type-B function or the Type-A function at any time depending on the requirements of the host. Any pointers? Thanks /kmk Tag: How to make viewers display contents embedded in web page ? Tag: 56020
  - 2
    - showing some thing while my device boots Hi In IXDP425 before it loads it shows just a blank screen and it isnâ??t good for the user to watch a blank screen or may be he think that his devices is hanged. So I want to show something (such as some texts or showing a logo) until it boots. Am I able to do that? If so how? Thanks a lot Tag: How to make viewers display contents embedded in web page ? Tag: 56009
  - 3
    - Showing something while the device boots Hi In IXDP425 before it loads it shows just a blank screen and it isnâ??t good for the user to watch a blank screen or may be he think that his devices is hanged. So I want to show something (such as some texts or showing a logo) until it boots. Am I able to do that? If so how? Thanks a lot Tag: How to make viewers display contents embedded in web page ? Tag: 56008
  - 4
    - Hive based Registry in IXDP425 Hi Some times a go I ask you some questions about hive based registry in IXDP 425 and you suggested my some ways and I could able to boot it. My question is in hive based registry it takes a very long time to boot (about 5-6 minutes) But when I tested hive based registry in CEPC it didnâ??t have a problem and booted as long as when it build on Ram based registry. Would you please tell me what my problem is? Thanks a lot Tag: How to make viewers display contents embedded in web page ? Tag: 56005
  - 5
    - Running pocket pc's program on Windows ce Hi I want to know does applications that wrote for pocket pc work on windows ce? For example look at http://www.skype.com/download_pda.html Thanks a lot Tag: How to make viewers display contents embedded in web page ? Tag: 56004
  - 6
    - Please tell me what are included in NK memory region ? in config.bib file, MEMORY SECTION NK 9F800000 00800000 RAMIMAGE PB`s help described it as this:The .bin files contain information about the image that the boot loader uses to boot the image. The .bin files are organized into logical units called records and exist only in the RAMIMAGE section of memory. So can you tell me what are bin files explicitly? any other files in it? i`m quite puzzled with it ! THANKS IN ADVANCE! Tag: How to make viewers display contents embedded in web page ? Tag: 56002
  - 7
    - Display Driver Upgrade Hi all, We are using WinCE4.2, and we have display driver(C&T65550) for WinCE4.1. I hope to upgrade display driver from WinCE410 to WinCE420. So, I want to know how display driver is modified. The following is test process to upgrade display driver. /*----------------------------- 1) C:\WINCE410\PUBLIC\COMMON\OAK\DRIVERS\DISPLAY\ASILIANT ------(copy)-----> C:\WINCE420\PUBLIC\COMMON\OAK\DRIVERS\DISPLAY\ASILIANT 2) Open build release directory, and build -ceZ at C:\WINCE420\PUBLIC\COMMON\OAK\DRIVERS\DISPLAY\ASILIANT ------(the result)----> don't know how to make "C:\WINCE42\public\common\oak\lib\x86\retail\gpe.lib 3) So, I modified "SOURCES" file. (I note "SOURCES" file for your reference at the bottom of this page.) TARGETLIBS=$(_COMMONOAKROOT)\lib\$(_CPUINDPATH)\gpe.lib ------(modification)----> TARGETLIBS=$(_COMMONOAKROOT)\lib\$(_CPUINDPATH)\gpe_lib.lib 4) And, build -ceZ, the result.... there is occured 5 unresolved external symbol(LIN2019) pfnDrvGradientFill GetGammaValue SetGammaValue ClearTypeBltInit ClearTypeSelect ---------------------------*/ I think that it is not necessity to modity setting value for C&T65550, BUT, Display driver is modified to interface with WINCE420. So, I hope how to modify wince410 display dirver to interface on WinCE420. If you allow, would you like to give me some help about thie issue? Thanks. "SOURCES" for your reference /*------------------------------------------------ RELEASETYPE=PLATFORM #!if "$(ODO_NODISPLAY)" != "1" TARGETNAME=DDI_CT #!endif TARGETTYPE=DYNLINK DLLENTRY=DllMain TARGETLIBS= \ $(_COMMONSDKROOT)\lib\$(_CPUINDPATH)\coredll.lib \ $(_COMMONOAKROOT)\lib\$(_CPUINDPATH)\emul.lib \ $(_COMMONOAKROOT)\lib\$(_CPUINDPATH)\gpe.lib \ $(_SYSGENOAKROOT)\lib\$(_CPUINDPATH)\ceddk.lib \ CDEFINES=$(CDEFINES) -DDDI -D$(_TGTPLAT) !IF "$(FBBPP)"=="" CDEFINES=$(CDEFINES) !ELSE CDEFINES=$(CDEFINES) -D$(FBBPP) !ENDIF #Enable a number of software-accelerated blts #CDEFINES=$(CDEFINES) -DSET256X64 -D_WINCE_2_00 #CDEFINES=$(CDEFINES) -DPANEL_648X350 -DDRV_VALIDATION -DBLT_ACCELERATION -DNO_MULTIPLE_MODE #CDEFINES=$(CDEFINES) -DBLT_ACCELERATION -DNO_MULTIPLE_MODE -DPOWER_HANDLER -DDRV_VALIDATION -DDRV_VALIDATION_BLT #CDEFINES=$(CDEFINES) -DBLT_ACCELERATION -DNO_MULTIPLE_MODE -DPOWER_HANDLER -DDRV_VALIDATION -DDRV_VALIDATION_LINE #CDEFINES=$(CDEFINES) -DBLT_ACCELERATION -DNO_MULTIPLE_MODE -DPOWER_HANDLER #CDEFINES=$(CDEFINES) -DNO_MULTIPLE_MODE ###### Copy the one you want to use here ############################# CDEFINES=$(CDEFINES) -DNO_MULTIPLE_MODE -DPOWER_HANDLER -DDRV_MMIO -DBLT_ACCELERATION PRECOMPILED_INCLUDE=precomp.h PRECOMPILED_PCH=precomp.pch PRECOMPILED_CXX=1 INCLUDES= \ $(_PUBLICROOT)\common\oak\csp\i486\inc; \ ..\..\..\inc; \ ..\inc; SOURCES= \ ddhalsrv.cpp \ Config.cpp \ Misc.cpp \ Cursor.cpp \ Blt.cpp \ SrcBlt.cpp \ PatBlt.cpp \ FullBlt.cpp \ Line.cpp \ Power.cpp \ Surf.cpp \ ioport.cpp \ gpevga.cpp \ setmode.cpp \ Escape.cpp \ vpe.cpp \ list.cpp #!IF "$(IMGNOVGA)" == "1" WINCETARGETFILES=$(_TARGETPLATROOT)\target\$(_CPUINDPATH)\DDI_CT.DLL #!ELSE #WINCETARGETFILES=$(_TARGETPLATROOT)\target\$(_CPUINDPATH)\DDI.DLL #!ENDIF Tag: How to make viewers display contents embedded in web page ? Tag: 55997
  - 8
    - Display Driver Upgrage Hi all, We are using WinCE4.2, and we have display driver(C&T65550) for WinCE4.1. I hope to upgrade display driver from WinCE410 to WinCE420. So, I want to know how display driver is modified. The following is test process to upgrade display driver. /*----------------------------- 1) C:\WINCE410\PUBLIC\COMMON\OAK\DRIVERS\DISPLAY\ASILIANT ------(copy)-----> C:\WINCE420\PUBLIC\COMMON\OAK\DRIVERS\DISPLAY\ASILIANT 2) Open build release directory, and build -ceZ at C:\WINCE420\PUBLIC\COMMON\OAK\DRIVERS\DISPLAY\ASILIANT ------(the result)----> don't know how to make "C:\WINCE42\public\common\oak\lib\x86\retail\gpe.lib 3) So, I modified "SOURCES" file. (I note "SOURCES" file for your reference at the bottom of this page.) TARGETLIBS=$(_COMMONOAKROOT)\lib\$(_CPUINDPATH)\gpe.lib ------(modification)----> TARGETLIBS=$(_COMMONOAKROOT)\lib\$(_CPUINDPATH)\gpe_lib.lib 4) And, build -ceZ, the result.... there is occured 5 unresolved external symbol(LIN2019) pfnDrvGradientFill GetGammaValue SetGammaValue ClearTypeBltInit ClearTypeSelect ---------------------------*/ I think that it is not necessity to modity setting value for C&T65550, BUT, Display driver is modified to interface with WINCE420. So, I hope how to modify wince410 display dirver to interface on WinCE420. If you allow, would you like to give me some help about thie issue? Thanks. "SOURCES" for your reference /*------------------------------------------------ RELEASETYPE=PLATFORM #!if "$(ODO_NODISPLAY)" != "1" TARGETNAME=DDI_CT #!endif TARGETTYPE=DYNLINK DLLENTRY=DllMain TARGETLIBS= \ $(_COMMONSDKROOT)\lib\$(_CPUINDPATH)\coredll.lib \ $(_COMMONOAKROOT)\lib\$(_CPUINDPATH)\emul.lib \ $(_COMMONOAKROOT)\lib\$(_CPUINDPATH)\gpe.lib \ $(_SYSGENOAKROOT)\lib\$(_CPUINDPATH)\ceddk.lib \ CDEFINES=$(CDEFINES) -DDDI -D$(_TGTPLAT) !IF "$(FBBPP)"=="" CDEFINES=$(CDEFINES) !ELSE CDEFINES=$(CDEFINES) -D$(FBBPP) !ENDIF #Enable a number of software-accelerated blts #CDEFINES=$(CDEFINES) -DSET256X64 -D_WINCE_2_00 #CDEFINES=$(CDEFINES) -DPANEL_648X350 -DDRV_VALIDATION -DBLT_ACCELERATION -DNO_MULTIPLE_MODE #CDEFINES=$(CDEFINES) -DBLT_ACCELERATION -DNO_MULTIPLE_MODE -DPOWER_HANDLER -DDRV_VALIDATION -DDRV_VALIDATION_BLT #CDEFINES=$(CDEFINES) -DBLT_ACCELERATION -DNO_MULTIPLE_MODE -DPOWER_HANDLER -DDRV_VALIDATION -DDRV_VALIDATION_LINE #CDEFINES=$(CDEFINES) -DBLT_ACCELERATION -DNO_MULTIPLE_MODE -DPOWER_HANDLER #CDEFINES=$(CDEFINES) -DNO_MULTIPLE_MODE ###### Copy the one you want to use here ############################# CDEFINES=$(CDEFINES) -DNO_MULTIPLE_MODE -DPOWER_HANDLER -DDRV_MMIO -DBLT_ACCELERATION PRECOMPILED_INCLUDE=precomp.h PRECOMPILED_PCH=precomp.pch PRECOMPILED_CXX=1 INCLUDES= \ $(_PUBLICROOT)\common\oak\csp\i486\inc; \ ..\..\..\inc; \ ..\inc; SOURCES= \ ddhalsrv.cpp \ Config.cpp \ Misc.cpp \ Cursor.cpp \ Blt.cpp \ SrcBlt.cpp \ PatBlt.cpp \ FullBlt.cpp \ Line.cpp \ Power.cpp \ Surf.cpp \ ioport.cpp \ gpevga.cpp \ setmode.cpp \ Escape.cpp \ vpe.cpp \ list.cpp #!IF "$(IMGNOVGA)" == "1" WINCETARGETFILES=$(_TARGETPLATROOT)\target\$(_CPUINDPATH)\DDI_CT.DLL #!ELSE #WINCETARGETFILES=$(_TARGETPLATROOT)\target\$(_CPUINDPATH)\DDI.DLL #!ENDIF Tag: How to make viewers display contents embedded in web page ? Tag: 55996
  - 9
    - Any USB Ethernet device (RNDIS) out there that works on WinCE 5.0(XScale)? Thanks /kmk Tag: How to make viewers display contents embedded in web page ? Tag: 55995
  - 10
    - imaging support in Windows CE 5.0 Hi all, We have jpeg support in our hardware. Currently i am envisaging the imaging architecture in Windows CE 5.0. PB 5.0 help does not include much information about imaging architecture. are there any links (articles or references) to address this problem? more over it does not say anything about existing software jpeg encoder properties i.e whether it support jpeg baseline encoding or not etc. Regards Tag: How to make viewers display contents embedded in web page ? Tag: 55987
  - 11
    - AV Capture support in DirectShow Hi all, Windows CE 4.2 PB document says the following about Audio Video capture support in Directshow "Because Windows CE does not support the ICaptureGraphBuilder interface, you must manually configure the common elements of a DirectShow application and then adapt them for media capture". What common elements are being refered to here? We have a hardware which directly takes data from video source and encodes it in hardware. Before capturing the data from the source, the source(for ex: camera) needs to be configured. This configuration needs to be exposed by the source filter to the application. What kind of interface does the source filter needs to use to expose the configuration settings to the application Regards Tag: How to make viewers display contents embedded in web page ? Tag: 55986
  - 12
    - questions on usage of bitmaps in windows ce i am new to graphics development in windows ce. What is the format of bitmaps in windows ce like RGB raster scan? Are there any articles about usage of bitmaps in windows ce? while i was developing in symbian, we used to have hardware bitmaps which can be used by hw devices to directly write into them. this is due to the fact that hardware bitmaps are contiguous in memory. Any thing similar available in windows ce? is there any function to auto update the contents of the display frame buffer? Tag: How to make viewers display contents embedded in web page ? Tag: 55985
  - 13
    - PRB : Problem with Provisioning.xml file and IP Phone Hi all, I have already been on this problem for almost like a week. The steps what ever posted in the CE document does not seem to work for IP Phone .The problem is even though the Application can read the data from Provisioning.xml file, the parser cannot get the data back into variables. 1. I have validated my Provisioning.xml file properly through some other software. 2. If I try to pass some unicode encoded file , although it looks at the size correctly , when it reads the file , the contents are nothing. I don't know what's wrong there. 3. I have tried to debug the code using the source code available. My findings stop at ' CVoIPManualDCCore::get_SipServerParameters()' function always. Where it fails to get sip_uri, sip_server & transport type. 4. Initially I thought the problem could be due to conversion of data from ASCII to unicode based on the data I could see in Quick watch. Later when I checked memory locations I found the complete string and assuming that watch has not showed the full data , Is that correct ? This is my Provisioning.xml file. <?xml version="1.0"?> <parameters> <sip_uri>dsr@213.137.73.16</sip_uri> <sip_server>213.137.73.16</sip_server> <sip_transport_type>TCP</sip_transport_type> <sip_auth>User Credential</sip_auth> <sip_username>dsr</sip_username> <sip_password>2345</sip_password> </parameters> Can somebody help me . Thanks srini Tag: How to make viewers display contents embedded in web page ? Tag: 55979
  - 14
    - SHIP_BUILD is slowing down the ethernet Hello I set "Enable Ship Build" in the platform settings of the release version. The problem is now, that SHIP_BUILD is slowing down my LAN connection. To copy a file of 2.4MB to a network drive, the ship build version takes 30 sec. Without ship build it only takes 8 sec. Does anybody know why the ship build version is so slow? My system is PB4.2, SH3, SMSC LAN91C96. And BTW my goal is to get it down to 4 sec, this is the time CE3.0 took on the same system. TIA -- Michael Reim reim AT helmut-fischer DOT de Tag: How to make viewers display contents embedded in web page ? Tag: 55977
  - 15
    - Exception in CEPLAYER when playing WMV file I'm trying to use ceplayer to show a WMV file on my device. The WMV file is stored on a USB memory stick. After selcting the file the video plays for a few seconds. Then i get the following exception: Exception 004 Thread=81ac2e18 Proc=41d25d52 AKY=00000101 PC=03794ff8 RA=03795180 BVA=219531fa Process 'ceplayer.exe' If i start the player again, it also stops after a few second (time is different) and i get a new exception: Exception 004 Thread=81ac2e18 Proc=41d25d52 AKY=00000101 PC=03794ff8 RA=03795180 BVA=219531fa Process 'ceplayer.exe' This all is done in release version of WCE 4.2 using a MIPS CPU. When i do the same in a debug build, all works fine. Have anyone an idea how to isolate the problem ? Do i have to re-check m ydisplay driver ? Thanks in advance Holger Tag: How to make viewers display contents embedded in web page ? Tag: 55974
  - 16
    - Pocket Excel Hi We are using Wince.net 4.2...I client has requested Pocket Excel, wince.net 4.2 does have a excel viewer but no Pocket Excel. Is there anyway of adding this to my build??? Is it available??? I there anywahere we can buy this??? Regards Tag: How to make viewers display contents embedded in web page ? Tag: 55972
  - 17
    - wince 5.0 private source code I get following errors when trying to compile the private source code... e:\wince\WINCE500\PRIVATE\WINCEOS\COREOS\NK\KERNEL\kmodeentries.cpp(10) : fatal error C1083: Cannot open include file: 'KmodeEntries.hpp': No such file or directory e:\wince\WINCE500\PRIVATE\WINCEOS\COREOS\NK\KERNEL\kacl.c(173) : fatal error C1083: Cannot open include file: '../../../core/acl/accchk.c': No such file or directory Tag: How to make viewers display contents embedded in web page ? Tag: 55966
  - 18
    - Windows CE .NET Chinese BBS Windows CE .NET Chinese BBS Windows CE .NET ÖÐÎÄÂÛÌ³£º http://www.sunwisetech.com/bbs Dongquan Z Tag: How to make viewers display contents embedded in web page ? Tag: 55963
  - 19
    - SD Memory : CMD12 fail after double tape "Storage Card" HI, I am working on SD memory and SDIO driver in WinCE 5.0. I am taking the sample code from MAINSTONE platform and INTEL PXA27x CSP and start modifying from there. Currently, I am still in SD memory part and having the following problem. When I insert an SD card, I managed to get the "Storage Card" folder in My device and "DSK1:SD Memory" in control panel->storage manager. However, when I double tap the folder, the bus driver was requesting CMD17 (single block) 3 times followed by CMD12, then I got response time out. I can see files inside my card, but I can't copy the files out of my card. Here's my debug message after I double tap the "Storage Card" folder : 133826 PID:2bfae682 TID:4bc3a31a SDHBusRequestHandler - CMD: 0x11 DATA: 0x00000400, TC: 0 133828 PID:2bfae682 TID:4bc3a31a SDHBusRequestHandler - CMDAT Reg: 0x00000009, CMD:17n 133828 PID:2bfae682 TID:4bc3a31a SDHBusRequestHandler - Request Sent 133829 PID:2bfae682 TID:4bc3a31a Collecting Response .... 133830 PID:2bfae682 TID:4bc3a31a complete taking from RES_FIFO ... 133830 PID:2bfae682 TID:4bc3a31a Response are taken .... 133831 PID:2bfae682 TID:4bc3a31a m_dwNumBytesToTransfer:0x200 NumBlocks: 0x1 BlockSize:0x200 133833 PID:2bfae682 TID:4bc3a31a dmacIntrTypeTransComplete ... 133834 PID:2bfae682 TID:4bc3a31a TransferIstThread: read, DMAC Transfer Complete! 133835 PID:2bfae682 TID:4bc3a31a transfer Done 133836 PID:2bfae682 TID:4bc3a31a SDHBusRequestHandler - CMD: 0x11 DATA: 0x00027000, TC: 0 133837 PID:2bfae682 TID:4bc3a31a SDHBusRequestHandler - CMDAT Reg: 0x00000009, CMD:17n 133838 PID:2bfae682 TID:4bc3a31a SDHBusRequestHandler - Request Sent 133840 PID:2bfae682 TID:4bc3a31a Collecting Response .... 133841 PID:2bfae682 TID:4bc3a31a complete taking from RES_FIFO ... 133842 PID:2bfae682 TID:4bc3a31a Response are taken .... 133843 PID:2bfae682 TID:4bc3a31a m_dwNumBytesToTransfer:0x200 NumBlocks: 0x1 BlockSize:0x200 133844 PID:2bfae682 TID:4bc3a31a dmacIntrTypeTransComplete ... 133845 PID:2bfae682 TID:4bc3a31a TransferIstThread: read, DMAC Transfer Complete! 133846 PID:2bfae682 TID:4bc3a31a transfer Done 133848 PID:2bfae682 TID:4bc3a31a SDHBusRequestHandler - CMD: 0x11 DATA: 0x00027200, TC: 0 133849 PID:2bfae682 TID:4bc3a31a SDHBusRequestHandler - CMDAT Reg: 0x00000009, CMD:17n 133850 PID:2bfae682 TID:4bc3a31a SDHBusRequestHandler - Request Sent 133851 PID:2bfae682 TID:4bc3a31a Collecting Response .... 133852 PID:2bfae682 TID:4bc3a31a complete taking from RES_FIFO ... 133852 PID:2bfae682 TID:4bc3a31a Response are taken .... 133853 PID:2bfae682 TID:4bc3a31a m_dwNumBytesToTransfer:0x200 NumBlocks: 0x1 BlockSize:0x200 133854 PID:2bfae682 TID:4bc3a31a dmacIntrTypeTransComplete ... 133855 PID:2bfae682 TID:4bc3a31a TransferIstThread: read, DMAC Transfer Complete! 133856 PID:2bfae682 TID:4bc3a31a transfer Done 133858 PID:2bfae682 TID:4bc3a31a SDHBusRequestHandler - CMD: 0x0C DATA: 0x00000000, TC: 2 133859 PID:2bfae682 TID:4bc3a31a SDHBusRequestHandler - CMDAT Reg: 0x00000041, CMD:12n 133860 PID:2bfae682 TID:4bc3a31a SDHBusRequestHandler - Request Sent 133861 PID:2bfae682 TID:4bc3a31a SDHBusRequestHandler :Time Out Response Command 133862 PID:2bfae682 TID:4bc3a31a SDHBusRequestHandler - CMD: 0x0C DATA: 0x00000000, TC: 2 133863 PID:2bfae682 TID:4bc3a31a SDHBusRequestHandler - CMDAT Reg: 0x00000041, CMD:12n 133863 PID:2bfae682 TID:4bc3a31a SDHBusRequestHandler - Request Sent 133864 PID:2bfae682 TID:4bc3a31a SDHBusRequestHandler :Time Out Response Command 133865 PID:2bfae682 TID:4bc3a31a SDHBusRequestHandler - CMD: 0x0C DATA: 0x00000000, TC: 2 133865 PID:2bfae682 TID:4bc3a31a SDHBusRequestHandler - CMDAT Reg: 0x00000041, CMD:12n 133866 PID:2bfae682 TID:4bc3a31a SDHBusRequestHandler - Request Sent 133867 PID:2bfae682 TID:4bc3a31a SDHBusRequestHandler :Time Out Response Command 133868 PID:2bfae682 TID:4bc3a31a SDHBusRequestHandler - CMD: 0x0C DATA: 0x00000000, TC: 2 133868 PID:2bfae682 TID:4bc3a31a SDHBusRequestHandler - CMDAT Reg: 0x00000041, CMD:12n 133869 PID:2bfae682 TID:4bc3a31a SDHBusRequestHandler - Request Sent 133870 PID:2bfae682 TID:4bc3a31a SDHBusRequestHandler :Time Out Response Command I guess the problem is that the host controller does not need to send CMD12 after CMD17. I want to bypass this CMD12, how can I do that ? I have added the following code at the beginning of SDHBusRequestHandler(), but the system becomes hang : if ( pRequest->CommandCode == 12) { SetCurrentState(pController, CommandComplete); SDHCDIndicateBusRequestComplete(pController-> HCContext,pRequest , D_API_STATUS_SUCCESS); return SD_API_STATUS_SUCCESS ; } Thank you in advance regards, Ikhsan Tag: How to make viewers display contents embedded in web page ? Tag: 55959
  - 20
    - Serial Driver mod Hello, Im trying to modify the serial driver that comes with Platform Builder 4.2 so that an app i wrote in C# can detect ALL parity errors (it can't detect all without modification because data is coming in so fast, the app misses parity events raised by the driver). The main files that i'm looking at are ser16550.c and mdd.c. In ser16550.c, i modified the Receive Char Interrupt handler - SL_RxIntr, such that if a parity error was detected it would add a 6-byte signature in front of the associated byte. The signature i used was 0xF0-0x02-0x07-0xE4-0x19-0xF5 which was a randomly created by me. My C# app which will run on my x86 device basically searches for this signature and if it finds one, it knows that the byte following the signature had a parity error. This kinda worked, but occasionally, the data gets corrupted by the driver. I dont know exactly how the driver corrupts it but i have a sinking feeling it has something to do with my mod. At times i notice that a portion of the signature replaces bytes in the stream thus corrupting it. Since i am adding an extra 6 bytes into the stream everytime the driver detects a parity error, the underlying buffer that the driver uses to write incoming bytes needs to be dynamically adjusted to account for this. I just dont know how to do it. To explain, this is normally what happens when the driver has available bytes to be read: - it calls the SL_RxIntr to handle the received bytes, specifying the amount of room it has left in its write buffer using the variable RoomLeft. - SL_RxIntr loops RoomLeft times with each loop reading a byte from the receive register. SL_RxIntr(RoomLeft){ while(RoomLeft){ ReadLSR(); if(data available) read the register; else break; write the byte to writeBuffer; RoomLeft--; } } This is just a short version of it. I modified this to: SL_RxIntr(RoomLeft){ while(RoomLeft){ if(parity error){ insert signature into writeBuffer; RoomLeft = RoomLeft - 6; ReadLSR(); // Read the associated byte which has a parity error if(data available) read the register; write the byte to writeBuffer; break; // I break here so that i dont subtract RoomLeft to a neg value. else break; } ReadLSR(); // Read the associated byte if(data available) read the register; else break; write the byte to writeBuffer; RoomLeft--; } } I would appreciate it if you could supply some useful advice. And if anyone knows, how could i get in touch with the authors of the serial driver or someone who is extremely proficient in these sorts of drivers. Thanks a lot. Michael--J. Tag: How to make viewers display contents embedded in web page ? Tag: 55958
  - 21
    - Eboot problem After i use the cepcdisk.144 to make the boot disk . i boot the PC up from eboot, but i cannot find any device available in the "active device" of the connection setting of WINCE platiform builder I am using Asus motherboard P4GE-VM with onboard ethernet card. Thanks for helping Tag: How to make viewers display contents embedded in web page ? Tag: 55957
  - 22
    - how can I bring up/shut down a dial up internet connection programatically? as title, it is not winsock api right? Tag: How to make viewers display contents embedded in web page ? Tag: 55955
  - 23
    - 5.0 Biosloader Error I am trying to use the Biosloader bootloader in Windows CE 5.0 Evaluation with no success. I have tried to use the canned images by using SETUPDISK.144 found in the \WINCE500\PUBLIC\COMMON\OAK\CSP\X86\BIOSLOADER\DISKIMAGES folder and looking at the debug output (captured from the serial debug port) it appears to be jumping to address 0x0. Modifying the sources file and source code to display additional debug information (already present by MS just uncommenting the code) I get the results shown below. It appears that after reading the 4th record it reads a record containing all zeros's (nulls) and then attempts to use that information to jump to the image (0x0). I have verified that the NK.BIN is solid using LoadCEPC and the image loads fine. Does anyone have any ideas or input? Thanks Microsoft Windows CE BIOS Bootloader Version 2.2 (Built Aug 18 2004) Drive Info: - Drive ID ................... 0x80 - Sector Size ............... 0x200 - Heads ...................... 0x20 - Number of Sectors Per Track 0x3F FAT Info: - FAT Type ................... 1 - Cluster Size ............... 0x800 - Number of FATs ............. 0x2 - Number of Sectors Per FAT .. 0xF4 - Number of Hidden Sectors ... 0x03F - Number of Reserved Sectors . 0x1 - Root dir location (LBA) .... 0x228 - FAT location (LBA) ......... 0x40 - Data location (LBA) ........ 0x248 INFO: Found file 'boot.ini' (start=0xE size=0x49E) WARNING: File 'splash.bmp' not found WARNING: Cannot find splash image INFO: Found file 'nk.bin' (start=0xF size=0xDA2D5F) Image Header: ------------------------------------------------ Sync Bytes ................. 'B000FF' Image Address .............. 0x220000 Image Length ............... 0xDE3974 Record Header: ------------------------------------------------ Record Address ...................... 0x220000 Record Length ....................... 0x10 Record CheckSum ..................... 0x80B Record Header: ------------------------------------------------ Record Address ...................... 0x220040 Record Length ....................... 0x8 Record CheckSum ..................... 0x1FC Record Header: ------------------------------------------------ Record Address ...................... 0x220048 Record Length ....................... 0x4 Record CheckSum ..................... 0x149 Record Header: ------------------------------------------------ Record Address ...................... 0x221000 Record Length ....................... 0x3D3B0 Record CheckSum ..................... 0x182A366 Record Header: ------------------------------------------------ Record Address ...................... 0x0 Record Length ....................... 0x0 Record CheckSum ..................... 0x0 WARNING: Cannot get mode info (status=0x14F) Jumping to image (address=0x0) Tag: How to make viewers display contents embedded in web page ? Tag: 55950
  - 24
    - ANN: WE-DIG Inaugral Meeting 9/1 Visit www.we-dig.org to register. ========================================== WE-DIG / Seattle Windows Embedded Developers Interest Group September Meeting Agenda Date: September 1, 2004 Location: Quinalt Room, Building 34, Microsoft Main Campus, Redmond, WA Our Mission: The Windows Embedded Developers' Interest Group is dedicated to the exchange of ideas around Microsoft Windows embedded and mobile software development. ========= MEETING AGENDA ========= 6:30 Pre-Meeting Event: Author Book Signing 7:00 Meeting Starts 7:10 Panel: Windows CE 5.0 Team Members 8:00 Break 8:10 Whats News 8:25 Tool Time: Entrek Tools 8:30 Open Problem Solving Session 9:00 Drawing / Meeting Concludes ========= Pre-Meeting ========= We set aside a half-hour prior to the start of each meeting to provide an opportunity for first-time attendees to register with WE-DIG, to talk to the WE-DIG board, and for special events. The special event this month is an author book signing. Refreshments served. This is also the time to enter the drawing, which is held at the end of the WE-DIG meeting. We have a lot of goodies that you can win. The featured item is an iPaq H2210 Pocket PC, courtesy of the Microsoft Mobile Device Division. ========= Author Book Signing ========= Before the formal meeting starts, we are going to have an author book signing featuring the authors of two recently released .NET Compact Framework books, Paul Yao & David Durant. They will be available to answer your questions and sign your copies of their books (copies of which are going to be on hand for sale). ========= Meeting Starts ========= The meeting starts at 7:00pm. At this inaugural WE-DIG meeting, you are going to meet the members of the WE-DIG board, and learn about its mission. The MC is Paul Yao, a member of the WE-DIG board, and president of The Paul Yao Company. ========= Panel Featuring Windows CE 5.0 Team Members========= The latest version of Windows CE, version 5.0, shipped on July 9. Three members of the Microsoft Windows CE 5.0 team have graciously agreed to join us in a panel discussion: o Jeana Jorgensen, Windows CE Product Manager o Chip Schnarel, Group Program Manager, Windows CE o Mark Miller, Architect, Windows CE Audience participation is welcome, so come prepared to gain insights and to ask your own questions about this latest version of Microsoft's operating system for embedded and mobile software development. The panel is to be moderated by Chris Muench, Strategic Relations Manager at Siemens Automation, and a member of the WE-DIG board. ========= Whats News ========= During Whats News, you will hear late-breaking news about developments in the world of research, technology, and business which promise to have an impact on developers in the world of Microsoft Windows embedded and mobile systems. The Whats News segment is to be presented by Nick White, Microsoft Corporation. ========= Tool Time ========= Building great embedded and mobile solutions requires great tools, and so we dedicate a brief portion of each meeting to discuss tools - what we call "Tool Time" (with apologies to Tim Allen). Tool Time provides a chance for users to present reviews of development tools. Some Tool Time segments may feature tool developers announcing new products, or providing tips on using currently shipping products. This month features Michael Salamone of Entrek (http://www.entrek.com), to present insights into the various Windows CE-oriented development tools from his company. Michal is a member of the WE-DIG board. ========= Open Problem Solving Session ========= A key benefit of community events like the WE-DIG meetings is the opportunity to network with common interests. In addition to the informal networking that inevitably takes place at this type of meeting, the Open Problem Solving Session provides every attendee with the change to describe real-world development problems or issues that they have, and to get the perspective of ofther members. This is also the time of the meeting when any attendee can announce job openings, or when anyone looking for a job can let the group know that. Almost any public announcement is allowed, subject only to the limitations of good taste, the interests of the group, and the patience of the moderator. The Open Problem Solving Session is moderated by Jon Fincher, Program Manager for Windows XP Embedded, and member of the WE-DIG board. ========= Drawing ========= Just before the end of the meeting, we are going to have a drawing for lots of valuable prizes, including: * HP iPaq H2210 Pocket PC, courtesy of the Microsoft Mobile Device Division * Copies of books from the Addison Wesley .NET Developers Series * And lots more... -- Michael Salamone [eMVP] Entrek Software, Inc. www.entrek.com Tag: How to make viewers display contents embedded in web page ? Tag: 55944
  - 25
    - How to delete a Platform Hello How could you delete a platform from the platform builder? Ehsan Sadeghi Tag: How to make viewers display contents embedded in web page ? Tag: 55934

Dear all:

As we all know, there exist lots of contents file like .doc, .pdf etc can
embedded in web page.
And windows ce.net provide viewer programs like docviewer, pdfviewer,
xls, presviewer.
But from the configuration, it seems these viewers can only view files on
local storage disk.
It there any other method to view those embedded in web page ?

Thanks a lot!

Jack.

Top