How can I make my CE device to a suspend state

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - USB OHCI doesn't work Hi, all I have add a USB host driver in my paltform, after build I find that the ohci2.dll is in the release directory and it is also in the ce.bib. But after I download the NK.bin to my platform board, I haven't found the ohci2.dll in the all module and it seems it doesn't load to the board. The USB host doesn't work. After I press any key of the USB keyboard to the board, there is a continuous noise of "kaka". What's the matter with my operation? best regards Tag: How can I make my CE device to a suspend state Tag: 63260
  - 2
    - PAN ad-hoc connection support under Wce4.2 ? Is it possible to install PAN ad-hoc connection support for bluetooth under WinCe4.2? I would like to establish a winsock connection between the WinCe4.2 and a desktop. How can I implement or configure this functionality? H. Edgar. Tag: How can I make my CE device to a suspend state Tag: 63257
  - 3
    - Verification of code in RAM I have written an application that verifies the validity of the CE image executing in RAM. It does this by stepping through the nk.bin stored in compact flash and saving the start address, length and checksum for each record that gets loaded into RAM. Periodically (every 30 seconds), the app checksums each record in RAM and compares the calculated checksum and stored checksum for the record. If the checksums don't agree, then a corruption has occurred and the app reboots the system. This app was originally written and tested with CE 4.2 and never indicated a checksum discrepancy. Recently I rebuilt the app for CE 5.0 and am now finding that it always finds a checksum difference in one and only one record - the third record. In addition, the calculated checksum is always 12 more than the stored checksum (eg. Calculated: 0x0143ee21 Checksum Record: 0x0143ee15). Given that this is extremely reproducible and began after going from CE 4.2 to CE 5.0, it seems that CE 5.0 may be modifying the RAM used by this record. Can anyone help me out here? Thanks Tag: How can I make my CE device to a suspend state Tag: 63252
  - 4
    - NdisDevicePowerState Hi All, I set OID_PNP_SET_POWER through the following code from my application. pSetOid->Oid = OID_PNP_SET_POWER ; bRet = DeviceIoControl(g_hAdapter, IOCTL_NDISUIO_SET_OID_VALUE, pSetOid, sizeof(NDISUIO_SET_OID),0, 1024, &dwReturnedBytes, NULL); when i go thru th debug message, i find that the miniport driver gets a garbage device power state(pls see below). BUt i print the current power state in my application and it gives the correct device power state. I am using NDISUIO to talk to my miniport driver. +MiniportSetInformation[003b0030h] Oid[fd010101h]... 0x876bfc5c: [VT3065] PowerState change [D0]=>[D-858993661] 0x876bfc5c: [VT3065] PwrEvnt Status = [00]. 0x876bfc5c: [VT3065] PwrEvnt Enable = [00]. Thanks, Maju Tag: How can I make my CE device to a suspend state Tag: 63251
  - 5
    - pcmcia question platform is xscale 272 based on mainstone 2. i want to know, how do windows ce 5.0 trigger card isr? i thought it is ThreadRun scan status, CPcmciaCardSocket->SocketEventHandle CallBackToCardService m_pCallBackToCardService but my isr just don't get fired. can anyone help me? Tag: How can I make my CE device to a suspend state Tag: 63250
  - 6
    - NDIS_PNP_WAKE_UP_MAGIC_PACKET am trying to implement WAKE up On LAN feature on VT3065. I want to know whether NDIS_PNP_WAKE_UP_MAGIC_PACKET macro indicates the reception of a magic packet. ie. whether NDIS_PNP_WAKE_UP_MAGIC_PACKET is set only after the reception of a magic packet. Or Is there any way that I could recognize a magic packet?? Pls help me out!!!! Thanks, Johns Tag: How can I make my CE device to a suspend state Tag: 63249
  - 7
    - Persistent object store, WinCE 5.0 System: X86, IDE HDD. System does not have battery backup. How do I 'save and restore' files that are put in the \Windows folder (or any other folder not on the HDD) ? Kind Regards, Arthur Kater Tag: How can I make my CE device to a suspend state Tag: 63248
  - 8
    - how install a program into wince Hi,all how can I install a application with a dll to WINCE? actually, I want to run a application which need a dll in WINCE. for this application I can copy it manually to release directory then run it in Target-->run programs. but how can I add the dll file to WINCE? I have trid to add this dll in platform.bib and then make image and download NK.bin to platform board. but failed. best regards DongFang Tian Tag: How can I make my CE device to a suspend state Tag: 63247
  - 9
    - hai Jun Meng hai, is evaluation version of 5.0 contains the code of RTL8139,which is a working model,pls give an early response so that we can commit to our client..... Thanking u Tag: How can I make my CE device to a suspend state Tag: 63244
  - 10
    - ndislib.lib link error I'm trying to build a WinCE 4.2 "Industrial Controller" on the included standard Samsung BSP and running into the below build error. I haven't done anything between running the platform creation wizard and starting a debug build. What clue do I need? //Jesse Off Microsoft (R) Incremental Linker Version 6.24.3064 Copyright (C) Microsoft Corporation. All rights reserved. -nodefaultlib -entry:DllEntry -debug -debugtype:cv -incremental:no -pdb:C:\WINCE420\PUBLIC\smsng\WINCE420\smdk2410\cesysgen\oak\target\ARMV4I\debug\ndis.pdb -map:C:\WINCE420\PUBLIC\smsng\WINCE420\smdk2410\cesysgen\oak\target\ARMV4I\debug\ndis.map -savebaserelocations:C:\WINCE420\PUBLIC\smsng\WINCE420\smdk2410\cesysgen\oak\target\ARMV4I\debug\ndis.rel -MERGE:.rdata=.text -merge:.astart=.text -align:4096 -ignore:4001,4070,4078,4086,4089,4096,4099,4108 /STACK:65536,4096 -subsystem:windowsce,4.20 /base:0x10000000 C:\WINCE420\public\common\oak\lib\ARMV4I\debug\ndislib.lib C:\WINCE420\public\common\sdk\lib\ARMV4I\debug\ntcompat.lib C:\WINCE420\PUBLIC\smsng\WINCE420\smdk2410\cesysgen\oak\lib\ARMV4I\debug\ceddk.lib C:\WINCE420\PUBLIC\smsng\WINCE420\smdk2410\cesysgen\sdk\lib\ARMV4I\debug\coredll.lib C:\WINCE420\public\common\sdk\lib\ARMV4I\debug\corelibc.lib C:\WINCE420\PUBLIC\smsng\WINCE420\smdk2410\cesysgen\sdk\lib\ARMV4I\debug\ndis.exp ndislib.lib(lookasid.obj) : error LNK2019: unresolved external symbol CTEAllocMem referenced in function MyLocalAlloc ndislib.lib(lookasid.obj) : error LNK2019: unresolved external symbol CTEFreeMem referenced in function MyLocalFree ndislib.lib(timerm.obj) : error LNK2019: unresolved external symbol SysintrNetworkInterruptMask referenced in function ndisSyncWithInterrupt ndislib.lib(timerm.obj) : error LNK2019: unresolved external symbol SysintrNetworkInterruptDone referenced in function ndisMIsr C:\WINCE420\PUBLIC\smsng\WINCE420\smdk2410\cesysgen\oak\target\ARMV4I\debug\ndis.dll : fatal error LNK1120: 4 unresolved externals NMAKE : fatal error U1077: 'link' : return code '0x460' Stop. NMAKE : fatal error U1077: 'C:\WINCE420\sdk\bin\i386\nmake.exe' : return code '0x2' Stop. Tag: How can I make my CE device to a suspend state Tag: 63236
  - 11
    - Virtual Addressing & the SA1111 Using a PXA255 w/ SA1111 companion chip. Running Intels "diagnositic manager" After enabling the SDRAMs and before setting up virtual memory, I run a simple loop that writes & reads a single SDRAM location. This works correctly. On the scope I see write & reads to the SDRAM going quickly with no unexpected access to anything else going on. After setting up virtual memory and "going virtual" I have the same simple code except I write to the equivalent virtual memory location in SDRAM. I see the write & then read to the SDRAM just as before. However, after the SDRAM access comes 3 unexpected write/reads to the SA1111. Can anyone give me a clue as to what is going on here? At first I thought it was interrupts - however, the only interrupt enabled is 'match reg 1' which is used by the delay macro. Any help is greatly appreciated! -Jeff Tag: How can I make my CE device to a suspend state Tag: 63234
  - 12
    - Connection manager connection closed by activesync Hi, I Successfylly established a connection(work) using the connection manager APIs in IPAQ5550.The platform is a pocket pc 2003 for mobile. But when i try to establish activesync connection, the connection i prevously established gets closed. Why this happens. I think this problem is related with PPC2003 since i have no problem with PPC2002. TIA, Gomas Tag: How can I make my CE device to a suspend state Tag: 63231
  - 13
    - Cardbus bridge on PCI Card Hi , Anyone knows about a PCI card that contains the TI 1520 Cardbus bridge or Ricoh R5C476 Cardbus bridge ( I assume they are both supported in Windows CE 5.0 ) ? Thanks in advance Tag: How can I make my CE device to a suspend state Tag: 63230
  - 14
    - setting time/date for headless device Is NTP available for WinCE 5.0? I would like my device to run an NTP client process periodically (once a day?) and set the system time & date from NTP servers located on the Internet. baronics. Tag: How can I make my CE device to a suspend state Tag: 63227
  - 15
    - LastWriteDate modified when using CE 4.2 File Server Hi, This is a second post. One of my CEPC applications uses two CEPC systems linked together via Ethernet. CEPC#1 is running the SMB file server and CEPC#2 accesses files on CEPC#1 through the file server. If files are copied from CEPC#2 to CEPC#1 via this link, the LastWriteDate for the copied files is changed to the date/time that the copy occured. If I use a WinXP system to link to CEPC#1 and copy files that way, the LastWriteDate remains the same as it was on the XP system, which is the behavior I would expect. The LastWriteDate is also modified if I copy files programmatically across the link between CEPC#2 and CEPC#1. Is this a bug? Thanks, Jim Frazer Tag: How can I make my CE device to a suspend state Tag: 63223
  - 16
    - ATAPI dirver not support FORMAT Store IOCTL? Hi all: I find that the ATAPI driver code do not support the DISK_IOCTL_FORMAT_MEDIA code,is it right? So if I use hard disk in my platform(ce5.0),I must format the hard disk first by PC ? CDisk::MainIoctl() ------------------------ case DISK_IOCTL_FORMAT_MEDIA: case IOCTL_DISK_FORMAT_MEDIA: dwError = ERROR_SUCCESS; break;; Tag: How can I make my CE device to a suspend state Tag: 63220
  - 17
    - Problem at USB OHCI SGksYWxsDQogICBJIHdhbnQgdG8gZHJpdmUgYW4gVVNCIE1PVVNFLCBidXQgaGF2ZSBhIHByb2Js ZW0gaGVyZS4gDQogICBXaGVuIGxvYWRpbmcgbXMyX29oY2kuZGxsLCBhdCB0aGUgZnVjdGlvbiBT T2hjZFBkZDo6SW5pdGlhbGl6ZU9IQ0ksIGFmdGVyIEdldElTUkluZm8oJmRpaSksIGJ1dCBib3Ro IHRoZSBwYXJhbWV0ZXJzIGRpaS5zeklzckRsbFswXSBhbmQgZGlpLnN6SXNySGFuZGxlclswXSBl cXVhbCB0byBaRVJPLiBTbyB0aGUgZmxvdyBkb2Vzbid0IGdldCBpbiB0aGUgaWYtc3RydWN0IHdo aWNoIGluc3RhbGwgSVNSIGhhbmRsZXIuDQogICBXaGVyZSBpcyB0aGUgSVNUIGZ1Y3Rpb24gaW4g T0hDST8gSSBoYXZlbid0IGZvdW5kIGl0IHlldC4gV2hlbiBVU0IgTU9VU0UgYXR0YWNoLCB3aWxs IGl0IGdlbmVyYXRlIGFuIGludGVycnVwdCwgYW5kIGdldCBpbnRvIHRoZSBJU1Q/DQogICBXaGVy ZSBHZXRJU1JJbmZvKCZkaWkpIGdldCB0aGUgdmFsdWVzIG9mIGRpaSBmcm9tPw0KICAgV2hpY2gg dmFsdWUgc2hvdWxkIEkgY29uZmlnIHRvIGRpaS5zeklzckRsbFswXSBhbmQgZGlpLnN6SXNySGFu ZGxlclswXSA/DQogICANCg0KDQotLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0t LS0tLS0tLS0tLS0tLS0tLS0tLSAgICAgDQpKLldhbHplcg0KSW50ZWxsaWdlbnQgR3JvdXBpbmcg UmVzZWFyY2ggYW5kIERldmVsb3BtZW50IEluc3RpdHV0ZSAgICAgICAgICAgICAgICAgICAgICAg ICAgICAgICAgICAgICAgICANCkFtb2kgRWxlY3Ryb25pY3MgQ28uLEx0ZC4NCndhbmd6QGFtb2ku Y29tLmNuDQpURUw6Kzg2LjU5Mi42NTEuNjc3NyBleHQuNjUxNQ== Tag: How can I make my CE device to a suspend state Tag: 63218
  - 18
    - Debugging device using WLAN Hi! Can anyone tell me is it possible to use WLAN for debugging and downloading image for Windows CE device? There is only defined - ethernet - serial - USB - Emulator - None in Platform Builder's "Target Device Connectivity Options". Does "Ethernet" mean that I can use LAN or WLAN connection? Thanks! Tag: How can I make my CE device to a suspend state Tag: 63216
  - 19
    - The exception in the generation of DLL Hi all: You know,the sources file define the name of DLL file,and PB uses it to make the DLL file.But I find there are some exceptions,which only have .def file.How do these exceptional DLL files generate ? And I find the same instance above in the pxa27x_wavedev.dll,which only has .def file.But I find some infos in a file "makefile"(WINCE500\PUBLIC\COMMON\CESYSGEN\):Is it useful. ------------ pxa27x_wavedev:: wavemdd pxa27x_xllp @set TARGETLIBS=$(OWNSTATICLIB) \ $(SG_OUTPUT_OAKLIB)\wavemdd.lib \ $(SG_OUTPUT_OAKLIB)\pxa27x_xllp.lib \ $(SG_OUTPUT_OAKLIB)\ceddk.lib ------------ Tag: How can I make my CE device to a suspend state Tag: 63210
  - 20
    - ERROR_OLD_WIN_VERSION I have the COM Library, when the register with regsvrce.exe it show this message: ERROR_OLD_WIN_VERSION . Like I could resolve the problem???? I have the SO wince 3.0 and the library is for wince 4.2 Thanks Tag: How can I make my CE device to a suspend state Tag: 63209
  - 21
    - Improvements for PB5.0 Dear MS I recently started with PB5.0 and I'm astonished that the most simple things are missing (Missing since the first PB version?): 1. I build a release version and get "0 errors(s), 0 warning(s)", but it didn't build the nk.bin because of errors. Why isn't it possible to display a error message on the last line of the output window? Yes I know, there is a message some lines above. 2. After build I press F4 for the first error and guess what? I get "error(s) in sysgen phase". That's not of much help. Yes, I know I have to open the error.log file, but why can't the IDE do that for me? 3. I open the build.log and see a message like this: "MoveFileEx failed. GetLastError: 112 (dec) 70(hex)." I know there is an API function to translate error numbers to error messages. Don't you know that too? Why isn't it possible to write the error message in a form that a human beeing can understand? Yes, I can find out everything on my own, but it would save me a lot of time, if the IDE would do that for me. This was my first day on PB5.0 and I'm wondering what comes next. -- Michael Reim reim AT helmut-fischer DOT de Tag: How can I make my CE device to a suspend state Tag: 63205
  - 22
    - How to add activesync to my headless platform? Hi, I have build a headless platform. I have a working usb driver when i plug into PC it is able to recognize my device as Microsoft USB sync device. However how do I make it to activate the activesync? I have noticed that the I dont even have a activesync module in my platform Really appreciate if anyone can help as i seem to have stuck at this for a long time Rgds Liaw Tag: How can I make my CE device to a suspend state Tag: 63204
  - 23
    - send an attach notification to Storage Manager Hi all: How does the device send an attach notification to Storage Manager using the GUID from the registry ? It is implemented by the device driver or Device Manager ? Tag: How can I make my CE device to a suspend state Tag: 63202
  - 24
    - What are the differences between the File System on WinCE and WiXP? Dear All: I'm study the drivers for the USB mass storage device and I found the throughput of read same file from storage to WinCE about 110 KB/s and to WinXP is 700KB/s. All of the HC is USB1.0 and the storage is the same, but I dont know what factor caused the different throughput?! I has get the the packet by USB protocol analyzer and found the transfer size on WinXP can be reached to 64K bytes but only 4kB on WinCE. What operation can help me to improve the throughput?! Thanks.... Tag: How can I make my CE device to a suspend state Tag: 63201
  - 25
    - continue of rtl8139 sorry of the abrupt ending,i know that in ETHDBG ,we have ne2000 and RTL8139 is there....but in the respective folders in the sources file the TARGETNAME=ne2kdbg and TARGETNAME=rtl8139dbg ;so i think where is the source file for RTL8139.dll;pls tell me experts... i am new to this field, Expecting ur early responce, Thanking u Tag: How can I make my CE device to a suspend state Tag: 63193
- Next
  - 1
    - Forcing USB enumeration I have a USB device with a driver which enumerates the USB descriptors to the PC when connected. I would like to force this the device to re-enumerate programmatically at run time from another application. The CM_...() functions of Windows are not available on CE to do this. What are the alternatives available? Thanks. Tag: How can I make my CE device to a suspend state Tag: 63192
  - 2
    - ethernet rtl8139 hai, i found driver for ne2000 compatible in netcard folder in wince420 but i didn't find driver for RTL8139 ;is this is also a ne2000 driver,in my system the nic is rtl8139 pci fast ethernet adapter...In my workspace only ne2000 component is there,but in the cepc debug image both ne2000.dll and rtl8139.dll ,if i have to analyse the working of realtek driver ,which code i have to analyse.... can u pls tell experts,i am really confused and wasting time also..... i know that in ETHDBG Tag: How can I make my CE device to a suspend state Tag: 63190
  - 3
    - Get device discriptor failed in usb device enumeration Hello I have downloaded the driver of SL811HS from Cypress , but it seems some problems in this driver. I even can't process device enumeration . When a usb device has been detected the driver should give a reset and start sending SOFs. However , only one SOF interrupt can be detected . Is anyone familar with SL811HS? I need your help Regards Tag: How can I make my CE device to a suspend state Tag: 63188
  - 4
    - Wireless Networks do not show up in list Hello All, I am trying to get a wireless network card working on my WinCE 4.2 device. I can install the drivers and use the card on another machine in the same room. However, when I install the drivers and try to use the card on the device we are developing, no networks show up in the list (there should be two). Could there be a feature that I have not included in my OS that would not allow me to see any networks? Thank you for any help you can give on this. CWC Tag: How can I make my CE device to a suspend state Tag: 63186
  - 5
    - Web Server Question - two CEPC systems interconnected Hi, I have an application that uses two CEPC systems connected by an Ethernet connection. One of the systems has a modem. Both systems have the web server enabled. Can anyone suggest a way that I can "pass through" the system with the modem and interact with the web server on the other system? Thanks, Jim Frazer Tag: How can I make my CE device to a suspend state Tag: 63183
  - 6
    - How to set System Time Clock When I set the System date and time in the Control panel and then run the hang up, but when the system resume, the system date and time return to the original, 1-1-1980,00:00:00. I want to know how to update OAL codes to solve the problem. My platform is XScale PXA255, and I use Wince 4.2. Thanks! Tag: How can I make my CE device to a suspend state Tag: 63182
  - 7
    - modify VoIP app Hi, all, I am wondering what is the right way to modify the VoIP application. I would like to make some changes to the UI and the function. However, I can not just modify the public code since I don't want to affect other projects like Emulator IP phone. I read the Cloning the Microsoft Public Common Code by Mike Hall and Steve Mailet. But the VoIP application is not just public code. It's also part of the IP Phone template. So I think there must be a different method. Should I clone the template? (Is cloning a template possible?) Or should I just copy the VoIP folder to my project (or BSP)? Many thanks ahead. Derek Tag: How can I make my CE device to a suspend state Tag: 63178
  - 8
    - Remote tools Hi every1! Can abybody tell me why some remote wince tools are working nice, but others hang? For example Remote Registry Editor and Remote Heap Walker work without any problem. I can connect/disconnect a zillion times and browse registry and walk memory. Absolutely no problems. However Remote Process Viewer hangs once it was connected. And the most strange behaviour with Remote File Viewer. It starts ok, connects to device and shows up first filesystem level. I can open "Temp" folder, and "Program Files" folder. Everything is o.k. until I try to open "Windows" or "Release" folder. the gui stops working and responding to the user :( I still can't understand what happens here. No debug output. Kitl is still live after this since I can ping device, stop on breakpoints, open another remote tools .... but some tools hang and gui stops to respond to user... I've started a new PXA270 based platform (Wince 5.0). The only difference from my previous platform is some new hw connected and different NIC chip. I use KITL+VMini and everything seems to work fine. I can't find any problems with kitl connection or CE target control service. Please help me. Tag: How can I make my CE device to a suspend state Tag: 63166
  - 9
    - ANN: Platform Builder Chat Today 1/27 Hello, Just a reminder about today's online chat regarding the the Platform Builder documentation. Members of the writing team will be on hand to answer your questions and take your suggestions. ~~~~~~~~~~~~~~~~~~ TITLE: Platform Builder Documentation: Drivers, BSP, Kernel, Power Management, OAL, Boot Loaders, and File System Thursday, January 27, 2005, 10 - 11 AM Pacific time Additional timezones http://www.timeanddate.com/worldclock/fixedtime.html?month=11&day=30&hour=10&min=0&sec=0&p1=234 Do you have suggestions about how the Platform Builder driver, BSP, kernel, power management, OAL, boot loader, and/or file system documentation can be improved to make your work easier? Take this opportunity to chat with Celeste De Guzman, Court Faw, and Luke Bayler about what you need from the documentation that they write for you. To join this chat, please log on via the main MSDN chat page at: http://msdn.microsoft.com/chats Thanks, Susan Fairo Content specialist, Windows Mobile and Embedded Devices UA Tag: How can I make my CE device to a suspend state Tag: 63165
  - 10
    - Conditionals in SOURCES files Hi all, I have a bit of an odd question. I have a BSP that's ostensibly for CE 5.0. AFAICT it's based on an older 4.2 BSP. The problem is that in the PCMCIA driver SOURCES file, there's the following conditional : !IF "$(_WINCEOSVER)" >= "500" INCLUDES=..\..\inc;$(_PUBLICROOT)\COMMON\OAK\DRIVERS\PCCARD\PCMCIA INCLUDES=$(INCLUDES);$(_PUBLICROOT)\COMMON\OAK\DRIVERS\PCCARD\COMMON !ELSE INCLUDES=..\..\inc;$(_PUBLICROOT)\COMMON\OAK\DRIVERS\PCMCIA\MDD !ENDIF Now, this is needed to support the directory name change between 4.2 and 5.0. However there is a problem. Whilst this conditional worked for CE 4.2, CE 5.0 now ignores the conditionals (as described in the help page for both versions!) and ends up complaining about the wrong path. Now, I accept that this is documented as correct behaviour and its just fortunate that this (undocumented) trick worked with CE4.2 however, I can't see a way to support this at all with CE5.0. Has anyone got a suggestion? I can see a workaround being to do : !IF "$(_WINCEOSVER)" < "500" INCLUDES=..\..\inc;$(_PUBLICROOT)\COMMON\OAK\DRIVERS\PCMCIA\MDD !ELSE INCLUDES=..\..\inc;$(_PUBLICROOT)\COMMON\OAK\DRIVERS\PCCARD\PCMCIA INCLUDES=$(INCLUDES);$(_PUBLICROOT)\COMMON\OAK\DRIVERS\PCCARD\COMMON !ENDIF Which would work as it relies on falling through under CE5 and re-defining the variable correctly. However, its not very nice and guaranteed to break in the future at some point! Best Wishes, Dave Peverley Tag: How can I make my CE device to a suspend state Tag: 63161
  - 11
    - Boot from serial Hi all, i have a Seco M515 board and i have a problem to download the OS image on it. That is, now i'm used to download it through 5 floppy disks organized in this way: - the first (System setup) to make fdisk, format c:, mkdisk c: - the others to download the OS image I'd like to make all these things by a PC through a serial or ethernet or parallel connections. But i'll be happy if i can download the OS image through the PC and the first phase with the system setup floppy again. I don't how to do that. The only things i have seen are two: - In the Bios setup, there is the possibility to enable the command "Try to boot from serial" - In the platform builder (.net 4.2) there is a command, "Target->Download/Inizialize" that seems to be exactly for my purpose, but it doesn't works how can i do? Thanks all. Andrea Tag: How can I make my CE device to a suspend state Tag: 63147
  - 12
    - pcmcia interrupt problem windows ce 5.0, xscale 272 board based on mainstone 2, the hardware work for eboot NK downloading, and i modified pdsocket.cpp, ThreadRun function, the mainstone2 board has a FPGA to manage pcmcia status signals, but I am doing it with GPIO. seems orginally it's been running poll mode, ok I'll follow for now, i am returning TRUE always for bIRQReadyStatus, so it should call my card(ne2000)'s ISR all the time? but i can only see DHCP discovery packet from my network monitor software, it do not accept server dhcp offer. any think can goes wrong? bCardDetectStatus = RV_PCMCIA_SLOT0_CD; bBvd1Status = RV_PCMCIA_SLOT0_BVD1; bBvd2Status = RV_PCMCIA_SLOT0_BVD2; bIRQReadyStatus = RV_PCMCIA_SLOT0_IRQ; //if (bIRQReadyStatus) RETAILMSG(1, (TEXT("pcmcia interrupt!\r\n"))); //else RETAILMSG(1, (TEXT("pcmcia no interrupt!\r\n"))); /* statusReg = m_pBLRegs->pcmcia0_srcr; bCardDetectStatus = !((statusReg & PCMCIA_S0_nCD_MASK) >> 5); bBvd1Status = !((statusReg & PCMCIA_S0_nSTSCHG_BVD1_MASK) >> 8); bBvd2Status = !((statusReg & PCMCIA_S0_nSPKR_BVD2_MASK) >> 9); bIRQReadyStatus = ((statusReg & PCMCIA_S0_nIRQ_MASK) >> 10); */ break; } Tag: How can I make my CE device to a suspend state Tag: 63140
  - 13
    - Which functions can I call from an ISR(Interrupt Service Routine) Hello ! Does anybody know if there are some special library with functions that can be called from an interrupt service routine, ISR. Standard functions like printf and so on cannot be used because blocking can occur. I have heard that there should be functions with the prefix SC_.... for this purpose, but I haven't found any information on this. Regards Tag: How can I make my CE device to a suspend state Tag: 63139
  - 14
    - about copying lib and dll files Hi,all I have a question about copying lib and dll files during sysgen PBWorkspace. whether PB would copy all the dlls either in publicor platform folders to RELEASE folder? whether dlls in platform can not have a same name from these in public folders? DongFang Tian ******************************************************** Intelligent Grouping Research and Development Institute Amoi Electronics Co., Ltd ******************************************************** Tag: How can I make my CE device to a suspend state Tag: 63137
  - 15
    - keypad driver Loading hi, can anyone pls tell me the method to load Keypad driver in windows ce i have the code ready Tag: How can I make my CE device to a suspend state Tag: 63135
  - 16
    - Native driver loading hi, i have developed all t he nesessray code ie ISR IST for Keypad Driver in Win CE 4.2, but i am not able to load it .i know i have to make entry in registry but then also it dosen load pls help me and tell me how to make an reg entry the dll name for my driver is keypad.dll waiting for reply Tag: How can I make my CE device to a suspend state Tag: 63134
  - 17
    - sa1111 / pxa255 & sdram Please advise if there is a more appropriate forum for this post. I have been using a lubbock based board with PXA255 & SA1111 companion chip which works fine. My new PDA version removed the SA1111. According to the intel developers manual, to run in companion chip interface mode you must : set the DMA GPIO's to there alternate function "MBGNT" & "MBREQ". When I removed the chip I changed these back to normal I/O's. set sa1111 compatibility bit to 1 in the MDCNFG reg. I set this back to 0. When I change these, the processor will no longer talk to the SDRAM correctly. Writing to 2 registers & then reading back finds the data corrupted. Has anyone else seen this problem. Any help would be greatly appreciated. -Jeff Tag: How can I make my CE device to a suspend state Tag: 63131
  - 18
    - ReadFile in NDISUIO HI All, I am using NDISUIO operations to query and set the OID values. I also use ReadFile to receive the packets. Does this ReadFile actually call UIO_Read() function and return me the packets on the buffer. I need to read these packets and check for a particular pattern. Thanks in Advance, Johns Tag: How can I make my CE device to a suspend state Tag: 63129
  - 19
    - common.reg vs. platform.reg vs. project.reg I'm a bit confused about the 3 .reg files. Sometimes documentation refers to a section in platform.reg, but when I search I can only found that section (and values) in common.reg. Should I copy these particular values to platform.reg and change them there or just change them in common.reg? When I copy a key and value from common.reg to project.reg and change it's value there, then reginit.ini in the releasedir will contain both the original value (from common.reg) and the changed value (from project.reg). The value from project.reg will be somewhere near the end of the reginit.ini file. Which values will be used? The first one or the second one? Kind regards and thanx for helping, Arthur Kater Tag: How can I make my CE device to a suspend state Tag: 63128
  - 20
    - GPE Library Hi, A "gpe.lib" is used in TARGETLIBS of a display driver. It gets generated everytime i do a full build [am using Pocket PC Adaptation Kit], what i do not understand is that from where is it getting generated? Theres no sources file anywhere present which says TARGETTYPE=gpe. But there is another sources file which generates gpe_lib.lib. Is there any relation between gpe_lib.lib and gpe.lib ? Also from where does gpe.lib get generated ? Can someone please clarify my doubt. Thanks in advance. Regards, Tag: How can I make my CE device to a suspend state Tag: 63127
  - 21
    - PB documentation: online chat with doc experts tomorrow PLATFORM BUILDER DOCUMENTATION: DRIVERS, BSP, KERNEL, POWER MANAGEMENT, OAL, BOOT LOADERS, and FILE SYSTEM Thursday, January 27, 2005, 10 - 11 AM Do you have suggestions about how the Platform Builder driver, BSP, kernel, power management, OAL, boot loader, and/or file system documentation can be improved to make your work easier? Take this opportunity to chat with Celeste De Guzman, Court Faw, and Luke Bayler about what you need from the documentation that they write for you. http://msdn.microsoft.com/chats/ -- Susan Fairo Tag: How can I make my CE device to a suspend state Tag: 63118
  - 22
    - Trouble with VIA Rhine driver and hive based registry under WinCE 5 Hi, We're having trouble getting the VIA Rhine ethernet adapter (FETCE5B.dll) working correctly under Windows CE 5.0 in conjunction with a hive based registry, however it works fine using a RAM based registry. When running as a Hive based registry the driver appears to load fine, however the lan icon in the systray has a red cross through it. If you double click on it is has no IP Address and it declares it's MAC address as being FF:FF:FF:FF:FF:FF. I've built many CE images for different platforms and have never had this sort of problem before. Initally we started with the CLE266 BSP, but after having these troubles I extracted the FETCE5B driver from the BSP, generated my own .cec file for it and then used the CEPC BSP with the FETCE5B driver added and get exactly the same result. Below are hyperlinks to 2 debug logs (captured serially), both of these are taken from the same project the first run as a Hive based registry then a switch to RAM registry with a clean build. I have looked through here for differrences when the ethernet adapter is being configured and the one difference I notice is that at the point of DHCP in the hive based launch "RequestWLAN" is called????? http://www.icrtouch.com/viaprob/debug_ram_registry.txt http://www.icrtouch.com/viaprob/debug_hive_registry.txt Please, please, please could someone help me to understand what I need to do to fix this problem. Many thanks for your time in reading this. Tag: How can I make my CE device to a suspend state Tag: 63117
  - 23
    - HowTo: Gateway to WWAN We want to build a 802.11b/g access point as a gateway to a Mobitex Wireless WAN. What are the high level steps to modify the Gateway template to redirect to the serially connected radio and wrap the packets with the Mobitext relevant packet headers? Obviously we need to write a serial driver to format and decode packets to the radio. Where do we intercept packets coming from the private network destined for the public network and vice-versa, basically the NAT process? Mobitex is a cellular style low speed data network billed by the packet. Any suggestions on how to meter the packets and how to reject large bandwidth items such as <IMG> etc.? Thanks Tag: How can I make my CE device to a suspend state Tag: 63112
  - 24
    - Serial driver for 4 serial port, single function, PCI device. I would like to add support for a PCI chip with four serial ports. The device has just one PCI function, with a base address register that maps a 32 byte IO region, which contains four sets of the standard 16550 UART registers. I would like to add support to both CE 4.2 and 5.0. I have been looking at CE 5.0, and would have no problem if each COM port had its own PCI function, because I could just add a registry entry for each function under [HKEY_LOCAL_MACHINE\Drivers\PCI\Template\...], each matching one function, and each instructing it to load 'COM16550.dll', with 'DeviceArrayIndex'=0. However, I can't do this because there is only one PCI function. What's the best approach? Do I need to write my own driver, and if I do, can my COM_Init function register four COM ports? Or is there a nice way to do this using the registry? Many thanks. Tag: How can I make my CE device to a suspend state Tag: 63108
  - 25
    - Point to Point VOIP I am starting a VOIP project where 2 CE devices with known IPâ??s will be talking to each other (no pun intended) basically point to point VOIP. I will probably be using geode processors. Does anyone have any suggestions as to where to look for "how to" information? ThankYou, Hari Tag: How can I make my CE device to a suspend state Tag: 63106

HI All,
How can I turn my CE device to a suspend state.When I suspend the device
from StartMenu, it shuts down.

Thanks
Johns

Top

Re: How can I make my CE device to a suspend state by Yannick

Yannick
Mon Jan 31 00:34:10 CST 2005

It depends on how your OEMPowerOff function is implemented.

--
----------------------------------------------------------------
Yannick Chamming's (eMVP)
ADESET
Windows Embedded Manager
ychammings AT adeset DOT com>
http://www.adeset.com
Tél : +33 (0)4.72.18.57.77
Fax : +33 (0)4.72.18.57.78
----------------------------------------------------------------

"Johns" <johnysmart@yahoo.com> wrote in message
news:eJwROntBFHA.2608@TK2MSFTNGP10.phx.gbl...
> HI All,
> How can I turn my CE device to a suspend state.When I suspend the device
> from StartMenu, it shuts down.
>
> Thanks
> Johns
>
>

Top