insertion of a 32-bit cardbus card get a detection of a 16-bit card

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - USBSerialFn : dwMaxTransferSize only set to dwMaxPacketSize because of WCEUSBSH bug ? Hi, In the \wince500\public\common\oak\drivers\usbfn\serial\usbfndrv.cpp file, in the USBSerialFn::CableAttached function we see the source code mentioning a "WCEUSBSH Bug". See the code snippet below. Code Snippet : >> >> void USBSerialFn::CableAttached() { .. DWORD dwBulkSize = (m_CurrentSpeed == BS_HIGH_SPEED? g_HighSpeedEndpoints[BULK_IN_DESCRIPTOR_INDEX].Descriptor.wMaxPacketSize: g_FullSpeedEndpoints[BULK_IN_DESCRIPTOR_INDEX].Descriptor.wMaxPacketSize); .. OpenBulkOut(m_hDevice, m_pUfnFuncs,uEdptAddr,TRUE,dwBulkSize, dwBulkSize, 4); // WCEUSBSH Bug. Only can usb MaxPacketSize .. << << The result is that the PDD has to complete transfers more frequently. I wondered if this was a bug of WCEUSBSH that had gotten fixed already, so I tried changing the call to OpenBulkOut to specify a larger dwMaxTransferSize parameter (4K buffer) : OpenBulkOut(m_hDevice, m_pUfnFuncs,uEdptAddr,TRUE,dwBulkSize,/*dwBulkSize*/4096, 4); The result is that it more than doubles our bulk out transfer speed. (simply because the MDD doesn't have to complete so many transfers any more I guess) I am wondering now if others have seen the same thing ? Can you try ? And better yet, can Microsoft confirm whether or not this indeed is a bug in WCEUSBSH that got fixed ? I do not seem to have any issues with my ActiveSync 4.1.0 (Build 4841). Let me know. Thanks -- Ronald Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80701
  - 2
    - where is the source file of btd.dll and btdrt.dll Hi everyone: Does somebody know where is the source file of btd.dll or btdrt.dll ? I use platform builder for WinCE 5.0. Best regards Sam Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80697
  - 3
    - USB Serial not working on WinCE 5.0 XSCALE Lubbock-based version of WinCE 5.0 is finally running, but I'm not able to get my USB Functional port working. In version 4.2 I had USB Functional without serial client working. It turned up as a "Windows CE device" on my PC. The USB structure has changed considerably from 4.2 to 5.0, but fortunately I had the Lubbock 5.0 version as a good starting point. In 4.2 version I didn't have to do any changes to the USB driver part, only change the GPIO-pin for USB attach/remove in the interrupt handler. In 5.0 version I have added the catalog item USB Functional from my BSP, but now it requires me to add the item: Device Driver -> USB Function -> USB Function Clients -> Serial (colud choose Mass Storage or RNDIS Client). When I plug my device into the PC it stops and I get unknown device on my PC. Need some advice, anything I have forgotten or should be awear of? ; @CESYSGEN IF CE_MODULES_USBFN IF BSP_PXA25XUSBFN [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\xsc1bdusbfn] "Dll"="xsc1bdusbfn.dll" "Prefix"="UFN" "Priority256"=dword:73 ; must be lower-priority than RndisFn's transfer thread "EndpointCount"=dword:10 "SupportedSpeeds"=dword:2 "IoBase"=dword:a6800000 ; UDC_BASE_U_VIRTUAL "IoLen"=dword:1000 ; Needs at least 0xE04. Round up to 1 page. "Sysintr"=dword:1e "BusIoctl"=dword:2a0048 "IClass"=multi_sz:"{E2BDC372-598F-4619-BC50-54B3F7848D35}=%b","{6F40791D-300E-44E4-BC38-E0E63CA8375C}=%b" ENDIF BSP_PXA25XUSBFN ; @CESYSGEN ENDIF CE_MODULES_USBFN /trond Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80694
  - 4
    - Serial PCMCIA Card . doesn't work?? HELP pb 5.0 ARM4 cpu, ti-pccard 1520 ( 2 sockets, one for pcmcia slot and the other for CF). The CF card is workable, after I added some registry values. [HKEY_LOCAL_MACHINE\Drivers\PCCARD\PCMCIA\TEMPLATE\PCMCIA] "Dll"="pcmcia.dll" "NoConfig"=dword:1 "IClass"=multi_sz:"{6BEAB08A-8914-42fd-B33F-61968B9AAB32}=PCMCIA Card Services" But the Ican't startup the Serial pcmcia card . Would you help to solve the problem ? .. Should I create any registry key? I found some registry keys below !! Does it affect my pcmcia card? .... ... [HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Detect\10] "Dll"="SERIAL.DLL" "Entry"="DetectModem" [HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Detect\41] "Dll"="pcx500.DLL" "Entry"="DetectPCX500" [HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Detect\50] "Dll"="ATADISK.DLL" "Entry"="DetectATADisk" [HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Detect\60] "Dll"="NE2000.DLL" "Entry"="DetectNE2000" [HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Serial] "DeviceArrayIndex"=dword:1 "Prefix"="COM" "Dll"="Serial.Dll" "ResetDelay"=dword:300 "IClass"="{CC5195AC-BA49-48a0-BE17-DF6D1B0173DD}" [HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Serial\Unimodem] "Tsp"="Unimodem.dll" "DeviceType"=dword:0 [HKEY_LOCAL_MACHINE\Drivers\PCMCIA\NE2000] "Dll"="ndis.dll" "Prefix"="NDS" "Miniport"="NE2000" [HKEY_LOCAL_MACHINE\Drivers\PCMCIA\CISCO] "Dll"="ndis.dll" "Prefix"="NDS" "Miniport"="Cisco" Below is the debug log.. 0x87d87000: OEMInterruptEnable: SYSINTR_GPIO_PCIB IRQ=7 SYSINTR=1e OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 30 0x87d87000: OEMInterruptEnable: SYSINTR_GPIO_PCIB IRQ=7 SYSINTR=1e OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 30 0x87d87000: OEMIoControl: IOCTL_HAL_ENABLE_WAKE not supported 0x87d87000: OEMInterruptEnable: SYSINTR_GPIO_PCIB IRQ=7 SYSINTR=1e OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 0x87bb0400: GetCardCRC: CardGetNextTuple returned fails 0x87bb0400: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\PCCARD\PCMCIA\INSTANCE\PCMCIA1\Prefix) returned 2 0x87bb0400: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\PCCARD\PCMCIA\INSTANCE\PCMCIA1\BusPrefix) returned 2 0x87bb0400: pcc_pcm.dll(PCMCIA.DLL) Init 0x87bb0400: ATADISK: PcmciaCallBack(CE_EXCLUSIVE_COMPLETE) 0x87bb0400: ATADISK: PcmciaCallBack(CE_CARD_INSERTION) 0x87bb0400: GetCardCRC: CardGetNextTuple returned fails 0x87bb0400: I_AdvertiseDeviceInterface: AdvertiseInterface({6beab08a-8914-42fd-b33f-61968b9aab32}, 'PCMCIA Card Services', 1) failed 183 0x87b8c400: CheckDll: NDIS.dll returns true 0x87b8c400: NE2000: DLL_PROCESS_ATTACH 0x87b8c400: DetectNE2000: DevType = 3, expected 6 0x87b8c400: NE2000: DLL_PROCESS_DETACH 0x87b8c400: CheckDll: NDIS.dll returns true 0x87b8c400: Cisco DLL_PROCESS_ATTACH Handle=0x87bce010 0x87b8c400: Cisco DetectCisco Routine Handle=0x5 0x87b8c400: Cisco DevType 3 Not Valid 0x87b8c400: Cisco DLL_PROCESS_DETACH OEMInterrupt: NKCallIntChain(IRQ=7) returns 30 0x87d87000: OEMInterruptEnable: SYSINTR_GPIO_PCIB IRQ=7 SYSINTR=1e OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 ... loop.... ... Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80691
  - 5
    - Fast Infrared Driver CETK testing Hi, I have developed a Fast IR driver for ARM platform. I am able to transfer the files between my desktop and development board. Though I am not able to transfer bigger files(since I am not using DMA yet), I am successfully able to transfer files of small size. while trying to run the CETK test cases, I found that, all the connection oriented test cases are skipping, and I am just getting the result as SKIPPED: Unable to establish connection to IRTestServer. Following is the procedure I follow. I am running one board as server and I run the following commands s services stop obx0: s irapisrv22 It shows Creating AF_IRDA endpoint IRSRV waiting for connect... Another board I am using as client and I am running the following commands s services stop obx0: s tux -o -d irapi22 -f cesh:irapitest.log Following components are added SYSGEN_IRDA, SYSGEN_WINSOCK, SYSGEN_OBEX_INBOX(file transfer) I have got the same code, passing all the test cases. The only difference is, more components are added to the platform, power management is also introduced. Wrt to the code I didn't do any modifications. Is there anything I missed out. Any help will be greatly appreciated Thanks in advance Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80687
  - 6
    - Turing for help: Could you give me a loading address of WINCE 3.0? Ladies and Gentlemen: Could you give me a loading address of WINCE 3.0? I am very glad if you would give me a hand. Yours Sincerely Liu Songhua Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80682
  - 7
    - How to boot form DiskOnChip on Mainstone? Hi, Does anyone know how to set the Mainstone jumper so that the device can boot from DiskOnChip rather than internal flash? Thanks very much~ Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80677
  - 8
    - WinCE: Problems including OEM help (.chm) files into Platform SDK Hi all, Having a bit of a problem that that has come up in the newsgroup archives (without any solution suggested) a couple of times before back in 2003-3. I'm trying to include a custom .chm help file into a SDK installer build via. the "Configure SDK..." dialog "Help" tab, as described in http://msdn.microsoft.com/library/default.asp?url=/library/en-us/wcepb40/html/pbtskaddingcustomhelpfilestosdk.asp, my file is included in the installer OK and written out with the other help files as part of the install, however it does NOT appear to be linked in to the SDK help presented in eMbedded Visual C++. Any ideas?? Thanks Richard Lang. Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80675
  - 9
    - HELP: Debug causes exception but release is fine I am creating a Property Sheet test application for my device. When I copy the debug a2test.exe to the device and run it all is well! But, when I use PB and download entire image and try to debug, I get a First-chance exception in NK.EXE (0xC000001C: Invalid System Service) when calling PropertySheet() The pertinent lines from the Debug are PID:bd99fb2 TID:bd9eeae 0x8bd815c4: ObjectCall: Failed(1): 15 PID:bd99fb2 TID:bd9eeae 0x8bd815c4: RaiseException: Thread=8bd815c4 Proc=8a14de30 'a2test.exe' PID:bd99fb2 TID:bd9eeae 0x8bd815c4: AKY=00000081 PC=8822f668(NK.EXE+0x0002f668) RA=88229280(NK.EXE+0x00029280) BVA=00000000 FSR=00000001 And I am in RETADDR ObjectCall (POBJCALLSTRUCT pobs) When I try to pull up the call stack for my application it shows NK!ObjectCall(_OBJCALLSTRUCT * 0x1002ed88 {method=0xffffeae5 prevSP=0x00000000 mode=0x0000001f ...}) line 1231 NK!PrefetchAbort + 324 bytes NK!PrefetchAbort + 324 bytes NK!PrefetchAbort + 324 bytes . . . I set break points in all of my DialogProcs and it is croaking before reaching any of them. I don't even know where to go from here? Any help / suggestions appreciated. gerrit Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80673
  - 10
    - NAND FMD with 10 byte ECC Hello, I am trying to determine if it is possible to create a NAND FMD driver that uses a 10 byte ECC algorithm for each 512 byte sector. Based on the WinCE 5.0 sample FMD drivers, I think there may not be enough room in the 16 byte spare area to save the 8 byte SectorInfo structure, the bad block marker, and 10 bytes of ECC data. MLC NAND suppliers recommend a 10 byte Reed-Solomon ECC strategy for each sector. Does anyone have an idea on how I can do this using the existing FAL? Thanks! Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80672
  - 11
    - Google rendering in IE on CE 5.0 For some reason I have trouble with some web pages text rendering in the IE. One of the sites that suffers from this problem is google.co. for some reason the text looks squeezed, I tried adding all available font as well as change encoding and text size but it does not help. Is it possible that IE does not give the site the right screen proportions? Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80671
  - 12
    - Wince device in windows network hi, Is it possible to have the CE device visible to other Desktop pcs while browser the local windows network. Can the CE device share files? What about the other way around, can the CE device display a list of all avilable pcs in the domain/workgroup? Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80670
  - 13
    - Serial Activesync connexion Hi All, I created my OS image using Platform Builder 4.2. I try to make a serial activesync connection on a SH3 board. I can connect via Ethernet or Usb cable, but i have trouble with serial connection. In debug mode, it works very well. In release mode, I have a strange behaviour : on the PC side, Activesync displays "connecting" and its icon becomes green and rounds. On the device side, it says "User authenticated". I dont think the cable is bad because every thing is ok in debug mode. In release mode, I have no debug trace to easily identify the problem. Can anybody point me in the right direction to resolve this problem ? Thanks, Dom Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80660
  - 14
    - Ethernet problem (Realtek) on GEODE I have built an image for CEPC with ethernet pci board (Realtek), put the image on HD and everything work perfect. I was able to debug my application (evc4) through ethernet. Then i have built the same image for GEODE (i have a board with geode and realtek inside). Put the image on HD. The Realtek is show and from my pc a can see the "conenction led" blinking and it seems that everything works. But when i try to debug my application (with evc4) after connecting with ActiveSync, i cannot use the ethernet, it goes only by serial port! What's wrong? Can someone help me? P.S. I use PB5 Thanks Roberto Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80656
  - 15
    - Changeing SYSINTR_MAXIMUM I have a CE 4.20 Platform with a lot of Interrupt's (more then the 32 supported by InterruptInitialize()) is it possible to change SYSINTR_MAXIMUM or SYSINTR_MAX_DEVICES ? Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80643
  - 16
    - Windows CE webserver how to use ActiveX controls/.NET controls/Java applets Hi folks, I'm currently using the HTTPD webserver in combination with the windows CE emulator. My goal is to access a windows CE HTTPD webserver HTML/ASP page using my desktop webbrowser and add some interactive content to that page by using an ActiveX control or a .NET control or a Java applet in the HTML/ASP page. I can access the web page from my desktop webbrowser (IE6) but I can't get any of the webpage components (ActiveX control or .NET control or Java applet) to be downloaded properly to the desktop PC. Here's some example HTML code i'm using: // ActiveX control in a signed cabinet file: <%@LANGUAGE="VBSCRIPT" CODEPAGE="1252"%> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <head> <title>TestASP</title> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"> </head> <body> <OBJECT ID="Nlview" WIDTH=100% HEIGHT=400 align="baseline" border="0" CLASSID="CLSID:F2C19A8B-3F1F-11D1-BEA3-008048EAD6C0" CODEBASE="nlview.cab#version=3,3,0,103"> <PARAM NAME="_Version" VALUE="65536"> <PARAM NAME="_ExtentX" VALUE="17886"> <PARAM NAME="_ExtentY" VALUE="12347"> <PARAM NAME="_StockProps" VALUE="4"> <PARAM NAME="Font" VALUE="Courier New"></OBJECT> </body> </html> // .NET control exposed from a dll file (control named 'DragListBoxCe' in // namespace 'CustomCeControls'): <%@LANGUAGE="VBSCRIPT" CODEPAGE="1252"%> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <head> <title>TestASP2</title> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"> </head> <body> <OBJECT id="List1" classid="ControlLibCe.dll#CustomCeControls.DragListBoxCe"> </OBJECT> </body> </html> // Applet <%@LANGUAGE="VBSCRIPT" CODEPAGE="1252"%> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <head> <title>TestASP3</title> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"> </head> <body> <APPLET name="javaClock" code="JavaClock.class" width=150 height=150> <PARAM name="fontsize" value="28"> <PARAM name="backcolor" value="black"> <PARAM name="fontcolor" value="red"> <PARAM name="hHandColor" value="green"> <PARAM name="mHandColor" value="green"> <PARAM name="sHandColor" value="red"> <PARAM name="hPointColor" value="red"> <PARAM name="mPointColor" value="lightgray"> <PARAM name="analog" value="true"> <PARAM name="dst" value="true"> </APPLET> </body> </html> I know that the HTML <OBJECT> tag is ignored by the CE webserver so I cannot use these objects in server side scripts (that's no problem for me because I only require these objects at the client side). I also read that HTML <OBJECT> tag behaviour is dependant of the webbrowser at the client side. Since the examples described above all work when I use 'em on a Windows XP IIS web server I'm pretty sure that the client side browser is ok One last thing: the logging of the Windows CE webserver logs HTTP status code 302 after a HTTP GET request where one of the files nlview.cab, ControlLibCe.dll, JavaClock.class is requested. I don't know why because they are present in the same virtual directory as the ASP page. Can anyone help me out or tell me if it's even possible what I'm trying to do? Thanks in advance, Greets, Eric Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80642
  - 17
    - KITL error message Dear Sir, I use WINCE 5.0 to develop my project which used PXA27X as main chip. Currentlly, the PCMCIA socket work well when system bootup. I also can connect to internet to browse information. But I can NOT enable KITL mode. When I download KITL-NK to SDRAM , the UART will send " !KITLSend(DBGMSG): Reentrant call, hTh:07FC9242" . And the message will NOT stop. Do anyone have idea about this issue ? BR, dirwdirw.tw Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80641
  - 18
    - on the ce initiation Dear all, I am new to platform builder. I want to know some details of the windows CE startup. Normally, when powered on, the CE will prompt you to calibrate the screen alignment. I want to know where is the codes to control this procedure. in common.reg,under hkey_local_machine\init, is this the right place to work on? By the way, how can I know which is the file for the logo of the windows CE startup? It should be an image file, but it seems I have searched all the image files but cannot find it... Please help! Thank you! HWB Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80634
  - 19
    - Win98 boot disk? I have a board that boots a win98 OS from a USB thumb drive but not a DOS 6.22 OS from a USB thumb drive. USB media is much cheaper that DOM and I would like to use this as a possible alternative to booting my CE image. Are there any licensing issues with this? Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80629
  - 20
    - the first splash screen Dear all, I am very new to CE platform builder. Hope my question is not a silly one. I want to know where (under which directory which file) I can find the file on the load sequences. That is, where I can find the source codes for the first splash screen? Thank you in advance! Best Regards, HWB Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80628
  - 21
    - .NET CF installation How can I install .NET Compact Framework (1.0.3111.. or greater) on my Windows CE .NET 4.20? The main problem is that my device is ARMv4I, and I only have the .NET CF installation package for ARMv4.. Mhaxx Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80623
  - 22
    - Soft reset problem Hello, I am trying to implement the soft reset ioctl. I am running from sdram, and it seems that just jumping to the begining of the image in the ram is not enough. The Wince kernel is re-starting, but when starting to load its dlls, it finds that some lists are already initialized and assumes that they are already loaded. my guess was that wince doens't initialize its static memory at startup. Is there a way to over come this? what is the proper way of doing the soft-reset? Thanks, Oren. Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80621
  - 23
    - VFPTR missing in debug windows Hi, I've built my C++ dll and seems to be working ok, its just that i can't see the VFptr pointer to vtable in the debug window. The Cminithread class which i've inherited from is ok, i can see the vfptr for that. Is there anything i need to setup. Thanks Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80620
  - 24
    - Battery driver get Voltage Hi All I am developing a battery driver for Intel XScale PXA270 module, I got some parts sorted like setting flags (acline online, battery charging, battery charged), but also need to read the voltage level of a main battery, if I understand correctly it can be done via UCB1400 (AD0 analog input) controller. Does anybody know how to do that? Thank you, Oleg Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80619
  - 25
    - Internet Explorer 6 Temp download directory Hi, When I try to download a file from the web that is larger then the free ram (object store) space. I am prompted with an error message. This message apears even before I can set the save location. I assume there is a default temp dir in which files are save before being copied to the selected location. My question is where is it and how can I change the default location (to my flash for example). Thanks Ohad Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80618
- Next
  - 1
    - San disk DOK on CE 5.0 I have problems with the recognition of all the new Sandisk doks on my stystem. I tried to apply the suggested fix from msdn with the diffrent attntion timer parameter (10 to 1) but it still does not work. Is it a lost cause? Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80617
  - 2
    - ARM Assembly problems Hi I am posting about a new issue I'm having. Trying to run some sample code but this line is giving me problems: ldr r3, =(variable1 | variable2 | variable3 | variable4 ) where variable1 EQU (0x00000002) variable2 EQU (0x00000004) variable3 EQU (0x00000008) variable4 EQU (0x00000010) it is giving error A0227: syntax error in expression ===================================================== If if i just use two variables, it works fine but any more than that wont work. The code is from a supposingly working sample. Thanks in advance everyone. Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80610
  - 3
    - Where do you find Platform Builder 4.2? I am new to driver development in Windows CE .NET and I read that I needed Platform Builder 4.2 to build/debug drivers. Can someone point me in the right direction as to where I can find Platform Builder 4.2? Thanks! Ryan Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80608
  - 4
    - testing with ARM assembly Hello, I would like to test a small ARM assembly code but it is not working properly. So I wanted to get the basics correct first. I made a new project and chose WCE application -> Blank project Created a TEST.S file and in it wrote: ==================================== AREA |text|,CODE,READONLY,ALIGN = 5 myfunction FUNCTION mov r2, r4 ENDFUNC END ==================================== Under settings for the project, set Executable Entry Point to myfunction. However, when I try to build this project, it says: BUILD: [01:0000000035:ERRORE] LINK : error LNK2001: unresolved external symbol myfunction BUILD: [01:0000000036:ERRORE] obj\ARMV4I\retail\test.exe : fatal error LNK1120: 1 unresolved externals Could someone point me in the right direction? Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80602
  - 5
    - CheckSentinels means? The Code: Created: pDevObj->pJObserver = new CJPortObserver(pDevObj->PortName); ... if (pDevObj->pJObserver) { // delete JObserver delete pDevObj->pJObserver; pDevObj->pJObserver = NULL; } Debug Output: 0x83885800: CJPortObserver dtor 0x83885800: Observer dtor 0x83885800: CheckSentinels: Bad tail signature item: 0x062EC900 @0x062EC950 -> 0x00 SHDB 0xa5 Hi MS guy: The CheckSentinels module is a safe guard to check the object free too much. Could anyone could tell me what cause the "Bad tail signature" condition? What is that means? Thanks Lu Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80595
  - 6
    - URGENT: Flash File System Trouble. Hi I have a strata flash present on my pxa270 board for which I am using mainstoneII bsp. Everything works fine with the driver, but I am having one trouble. Once the strata flash gets full, win ce doesn't let me delete/replace files anymore. It says not enough free space available, delete some files to make free space but it doesn't let me delete the file. I have to format the disk if it gets full but it deletes all the other files also. I tries to use RAMDisk just to check if I face the same thing over there. But there after making it full, I am able to delete the files. Another thing, once the flash gets full, I start getting compactor messages but the file system doesn't even get into my driver. Following are the messages I get over the serial port: 0x83d34400: FLASHDRV.DLL:CP_StartCompactor() - There aren't any DIRTY sectors left; the compactor can't be started 0x83d34400: FLASHDRV.DLL:SM_GetNextFreeSector() - Unable to start compactor in critical situation!!! 0x83d34400: FLASHDRV.DLL:SM_GetNextFreeSector() - Unable to reclaim any free sectors in a critical compaction stage. Media must be full. 0x83d34400: FLASHDRV.DLL:WriteToMedia() - Unable to get next free physical sector address for writing! The media is full... 0x83d34400: FLASHDRV.DLL:WriteToMedia() failed. 0x83d34400: Read/Write Sector failed (112) on Sector 7 I have inserted serial messages in driver all over but I am not getting any of them. Please suggest what to do? -- GD Shukla Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80580
  - 7
    - OAL Functions - PXA270, WinCE 5.0 Hi, I am a beginner to Win CE 5.0, developing a board based on the PXA270 and using the MainstoneII BSP . I am trying to develop the OAL according to the documentation which says I need to create stubs for the OAL functions OEMInterrupt*, etc. Do I need to put these in the \Platform\MyPlatform\Src\Kernel\OAL directory? I couldn't find them in the MainstoneII BSP so am I missing something? Thanks and regards, Simon Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80579
  - 8
    - Looking for toolhelp.lib for CE .NET 4.2 Hello, I develop an application with 'eMbedded Visual C++ 4.0 with Service pack 4' and 'Platform SDK'. When I compile my source, I meet the error which is related "toolhelp.lib". Becasue I use that functions in my application. So, I was looking 'toolhelp.lib' in the below directories which are installed 'eMbedded Visual C++ 4.0 with Service pack 4' and 'Platform SDK'. C:\Windows CE Tools C:\Program Files\Microsoft eMbedded C++ 4.0 C:\Program Files\Windows CE Tools But, I didn't found it. So, I search web sites and 'toolhelp.lib' file is in the platform builder. Unfortunately, I have not "platform builder .NET 4.2". Anyone can help me? I need only 'toolhelp.lib for .NET 4.2'. If you know the download location of "Platform Builder .NET 4.2", please let me know. Best Regards, -Terry Kim Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80578
  - 9
    - Deinstallation VS 2005 Beta causes Platform builder to defunction Hi All, On my development system i installed the Visual Studio 2005 beta version. Platform Builder 5.0 was already installed and was working fine. I deinstalled the Visual Studio 2005 beta version, via the website http://msdn.microsoft.com/vstudio/express/support/uninstall/. I start platform builder fine, and i am able to build any OSDesign without any problems however when i want to download my image to the target (emulator in this particular case) this fails with the PB error log : (CoreCon) 10:20:37 02/03/2006 West-Europa (standaardtijd): Failed to get debug message service! (CoreCon) 10:20:37 02/03/2006 West-Europa (standaardtijd): Transport service failed to connect (CoreCon) 10:20:37 02/03/2006 West-Europa (standaardtijd): Warning: One or more services failed to connect. Make sure that the service is properly configured. My colleague had the same problem, with a different machine, after deinstalling the beta version. A complete deinstallation of Platform builder and a clean installation resolved this problem.but, This can't be happening!! Is there any way to avoid a reinstallation? What happened here? What did the deinstallation break? Hope you can help, Erwin Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80576
  - 10
    - programmatic suspend/resume As part of a test application, I'm trying to suspend and resume a windows CE device. My method works great for Pocket PC 2003, but doesn't seem to work at all for CE 4.20. rt= (about 15 seconds in the future) CERunAppAtTime(_T("SomeApp.exe"), &rt); SetSystemPowerState(NULL, POWER_STATE_SUSPEND, NULL); SetSystemPowerState(NULL, POWER_STATE_ON, POWER_FORCE); In CE 4.20, when the device suspends, it never comes back. I actually have to cold-boot it to get it working again. Are there any suggestions of a better way to accomplish this? (If anybody else is trying to do this, Cam had an excellent suggestion about chaning the default timeout powerstate values in the PocketPC registry, but I think this also only works in Pocket PC 2003. I didn't find those values in CE 4.20. http://www.tekguru.co.uk/phpBB2/mob_topic.php?t=308 ) -PaulH Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80563
  - 11
    - Windows CE File System Performance We have a folder on a HDD (FAT32) that contains numerious files (15,000) which are long file names. A copy of this folder to another folder on the same HDD takes 2 hours 30 minutes on Windows CE 4.2 QFEs through Q3 of 2005 + KB909483. The processor is an x86 running at 600MHz and the HDD is 7200 RPM. The same operation using XP on the same hardware, different HDD but still 7200 RPM and the like, takes only 11 minutes. I understand that XP is highly optimized, but should Windows CE be taking 2 hours 30 minutes? Is there an issue of having that many files in a single folder? Do long file names impact the performance? David Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80560
  - 12
    - IPSM corruption. I am working on a Windows CE 5.0 PXA255 hive-based platform with IPSM. I have seen all sorts of data aborts and exceptions seemed to be caused by flash activities. Running customer applications from RAM instead of flash make the system a lot more stable. I have found a few posts from "The PocketTV Team" talking about a confirmed IPSM bug, which sounds like exactly what I am getting. While I can try with a newer version IPSM, does anybody know the status of this bug? Is it confirmed fixed in any version of IPSM? Bug description by "The PocketTV Team" at below: The IPSM driver from Intel has bugs preventing large applications from running when installed in IPSM. Basically when the IPSM bug is triggered, incorrect code-pages get executed, causing completely erratic behavior of the applications then a crash. often with a aberrant or garbled error message. http://groups.google.com/group/microsoft.public.smartphone/browse_frm/thread/68e82e119db32407/81391c1b0392c7a7?lnk=st&q=IPSM&rnum=4#81391c1b0392c7a7 http://groups.google.com/group/microsoft.public.smartphone.developer/browse_frm/thread/6cd5b7597a353b5f/ce9d36feef907218?lnk=st&q=IPSM+PocketTV&rnum=1#ce9d36feef907218 -- Zhongwei Wang Applied Data Systems www.applieddata.net Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80558
  - 13
    - Missing PCMCIA card insertion event (WinCE5) Hi All, In a pcmcia client driver that worked fine under earlier versions , I now have some trouble getting it to work with WinCE 5.0. After the CardRegisterClient function has registered the callback function, it is called with CE_REGISTRATION_COMPLETE event code. In previous versions of WinCE i always received a CE_CARD_INSERTION event before that. I didn't change the parameters to CardRegisterClient. Can anybody tell me why it is that I do not receive the CE_CARD_INSERTION event in a pcmcia callback routine under WinCE 5 anymore? Regards, Antoin Janssen Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80543
  - 14
    - DllMain error Hi, I'm getting following error : DllMain : function cannot be overloaded when i compile below source in my cpp file. Anyone know why this would happen. Any external settings that could cause this. I have only used the function once so can't understand why it could be overloaded. BOOL WINAPI DllMain(HINSTANCE DllInstance, DWORD Reason, LPVOID Reserved) { switch(Reason) { case DLL_PROCESS_ATTACH: DEBUGMSG(ZONE_INIT, (TEXT("SPIBUS: DLL_PROCESS_ATTACH\r\n"))); DEBUGREGISTER(DllInstance); DisableThreadLibraryCalls((HMODULE) DllInstance); break; case DLL_PROCESS_DETACH: DEBUGMSG(ZONE_INIT, (TEXT("SPIBUS: DLL_PROCESS_DETACH\r\n"))); break; } return TRUE; } // DllMain Thanks Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80539
  - 15
    - IPSM & P30 Hi! I am trying to migrate from 28F256J3C flash to the 28F256P30B flash and I have problems with the IPSM. It fails in FD_Init function after boot. I know that P30 blocks are all in a locked state after power up and I would like to know if IPSM is doing unlock by itself or must I unlock it for him (e.g. in bootloader). Has anybody migrate successfully? PS: we have IPSM3.8 and Wince4.2, PXA255, two P30 chips in parallel. Thanks, Jernej Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80523
  - 16
    - CE4.20, changing SNTP refresh timeout For WinCE4.20 We've had some problems when setting the SNTP registry key "Refresh" value lower than 24 hours, which caused the SNTP services to fail and die. I could not find any hints in the PB documentation, so I ran a debug image to see what happened, where I found out that "RecoveryRefresh" must be lower or same as "Refresh" value...( 5 mins is lowest value allowed ) Later on i found out that the PB5.00 documentation have been updated with these facts, but I'll post this anyway, in case someone still working with CE4.20 might find this info useful. :) /Magnus Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80522
  - 17
    - Environment variable SYSGEN not defined Hi; I want to create new bootloader from command prompt.!My goal is to get A basic bootloader. And Im using Platform Builder 5.0 Windows CE 5.0 for ARM9302 development kits Im following tutorial on the msdn web site: http://msdn.microsoft.com/library/default.asp?url=/library/en-us/wcehardware5/html/wce50howhowtodevelopabootloader.asp I cannot past step 3, "At the command prompt, enter the following command: sysgen" I cut and paste the sample from tutorials steps code. But cannot compile it from the command line. previous commnad prompt steps; -------------------- set _WINCEROOT=c:\wince500 cd %_WINCEROOT%\public\common\oak\misc Wince.bat ARMV4I CEBASE BTE_Boot // BTE_Boot platform directory = C:\WINCE500\PLATFORM\BTE_Boot Sysgen -------------------------------- Step 3 getting error. ------------------------------ C:\WINCE500\PLATFORM\PCM_4862\SRC\BOOTLOADER\EBOOT>sysgen Starting sysgen phase for project ( common ) User selected the following SYSGEN variables Environment variable SYSGEN not defined Checking for uncleared variables Done checking for uncleared variables Report: Environment variable SYSGEN not defined The system cannot find the path specified. .... Have you gota any idea? Sincerely, Gökhan Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80520
  - 18
    - Cant find .lib files in custom SDK After i built my own SDK and install it the eVC++ gives link error to standart hello world application: LINK : fatal error LNK1104: cannot open file 'commctrl.lib' Did i make something wrong while building SDK? Because there is really no commctrl.lib file in SDK directory. Or should i add the lib files (or directory link) manually to built the project? Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80516
  - 19
    - Environment variable SYSGEN not defined Hi; I want to create new bootloader from command prompt.!My goal is to get A basic bootloader. And Im using Platform Builder 5.0 Windows CE 5.0 for ARM9302 development kits Im following tutorial on the msdn web site: http://msdn.microsoft.com/library/default.asp?url=/library/en-us/wcehardware5/html/wce50howhowtodevelopabootloader.asp I cannot past step 3, "At the command prompt, enter the following command: sysgen" I cut and paste the sample from tutorials steps code. But cannot compile it from the command line. previous commnad prompt steps; -------------------- set _WINCEROOT=c:\wince500 cd %_WINCEROOT%\public\common\oak\misc Wince.bat ARMV4I CEBASE BTE_Boot // BTE_Boot platform directory = C:\WINCE500\PLATFORM\BTE_Boot Sysgen -------------------------------- Step 3 getting error. ------------------------------ C:\WINCE500\PLATFORM\PCM_4862\SRC\BOOTLOADER\EBOOT>sysgen Starting sysgen phase for project ( common ) User selected the following SYSGEN variables Environment variable SYSGEN not defined Checking for uncleared variables Done checking for uncleared variables Report: Environment variable SYSGEN not defined The system cannot find the path specified. .... Have you gota any idea? Sincerely, Gökhan Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80512
  - 20
    - Boot disk problems I created a boot disk using the following tool. C:\Program Files\Windows CE Platform Builder\5.00\CEPB\UTILITIES\cepcboot.144 When I startup my CE device I get the blue menu screen with the list of usual options. When I select an option I get the following text on the screen Jumping to 0x0013A388 Once my CE image loads it's gone. How do I supress this from displaying on the screen? Thanks Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80508
  - 21
    - CE databases and registry hives on transaction safe file systems As i understand, tfat means that the fat table will have a copy that remains intact in case of for example a power loss on the hard drive where the tfat partition is. But if a file gets "half"-written, say a power loss happens while writing that file might become "broken". Right? But what about registry hives or cedb/edb databases? Do they maintain some kind of integrity in case of a power loss? Or do I need to have my own backup mechanism for registry hives and database volumes? How could I in that case make backups? For registry I could use RegSaveKey. But what is the correponding function for cedb/edb? The file seems exclusive locked, so I can't simply use CopyFile (although that would probably be a bad idea anyway). What if I use the Reliance file system? Any difference there? Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80498
  - 22
    - CMOS Camera Modules and PXA270 I'm looking for a CMOS Camera Module. Considering that PXA270 operates at 3.3V (in my case at least) the minimum requirements are that the module's digital IOs be 3.3V tolerant. Frame size no less than VGA. The manufacturers hardly sell samples in single quantity. I was wondering 1) if you know any reseller that accepts very small orders...I'm not a cameraman afterall :) 2) if any SBC manufacturer has already purchased such modules for production and is willing to sell them separately. 3) As time goes by these modules keep on lowering their power supplies. It's not uncommon to find modules working at 2.8V, 2.5V and/or 1.8V. 3.3V is becoming uncommon. This is an issue when the processor works at 3.3V. The modules are controlled by an I2C interface. On the Module's side of the I2C lines we see 2.8V, on the processor's side we see 3.3V. These lines have to be pulled-up to VCC. Which Vcc would you use? 3.3? 2.8? Philips (the father of I2C) states that it's not so safe to wire and pullup such lines without a proper interface (translation). What's your experience about that? Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80496
  - 23
    - eboot.nb0 generation I created a new platform and under PLATORM/platformname/src/booloader/eboot, if I build that project (after a total Sysgen), it creates a eboot.nb0 and eboot.bin file in the release directory. I copied the "eboot" folder to another folder and renamed it to "testboot". I changed all references to "eboot" names in the bib and sources file to "testboot". Once I compiled it, it did not generate a testboot.nb0 etc... it did generate a "testboot.exe" however. How can i generate a custom bin/nb0 file? Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80483
  - 24
    - Soundcard? Hi guys, i'm quite new to CE 5.0 and trying to test this OS on a x86 platform. I'm using PB to build an OS image for a PIII pc equipped with HD,CDROM, NIC and a soundcard. I've been able to boot the OS thanks to the MS-DOS floppy and NK.BIN image on the HD but now i'm facing two kind of problems: 1-how may i let the OS see the HD? I've already been able to let it see a USB stick. 2-how may i let the OS support the soundcard??? I've seen that there's just the ENSONIQ driver which is supported by CE. Does this mean i have to use just this kind of device? It's not so clear to me... Is there anyone there who can help me? Tks in advance Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80476
  - 25
    - windows ce 5.0 platform builder error Dear all, I have errors in building image here is what I got in platform build window, also I append the build.log file at the end of this thread --------------------Configuration: Samsung SMDK2410: ARMV4I_Release-------------------- Starting Build: blddemo -q ============== Generating PB Project Folders Done Generating PB Project Folders Generating PBWorkspace Files to C:\WINCE500\PBWorkspaces\Test4\WINCE500\smdk2410_ARMV4I\oak Done Generating PBWorkspace Files CEBUILD: Deleting old build logs CEBUILD: Skipping directly to SYSGEN phase Building dep trees: winceos dcom gdiex ie script servers shellsdk shell rdp wceshellfe wceappsfe viewers directx voip datasync netcf SQLCE ostest speech Test4 CEBUILD: Running sysgen preproc (for COMMON) Starting sysgen phase for project ( common ) User selected the following SYSGEN variables sysgen_as_base=1 sysgen_as_file=1 sysgen_audio=1 sysgen_auth=1 sysgen_auth_ntlm=1 sysgen_auth_schannel=1 sysgen_autoras=1 sysgen_aygshell=1 sysgen_battery=1 sysgen_bth=1 sysgen_bth_ag=1 sysgen_certs=1 sysgen_connmc=1 sysgen_crypto=1 sysgen_cursor=1 sysgen_dotnet=1 sysgen_dotnet_support=1 sysgen_eap=1 sysgen_eth_80211=1 sysgen_ethernet=1 sysgen_fsadvertise=1 sysgen_fsreplbit=1 sysgen_help=1 sysgen_iabase=1 sysgen_ie_jscript=1 sysgen_irda=1 sysgen_menu_overlap=1 sysgen_modem=1 sysgen_msim=1 sysgen_notify=1 sysgen_obex_client=1 sysgen_obex_server=1 sysgen_pie=1 sysgen_pm=1 sysgen_ppp=1 sysgen_pptp=1 sysgen_qvgap=1 sysgen_redir=1 sysgen_shell=1 sysgen_standardshell=1 sysgen_tcpip6=1 sysgen_touch=1 Checking for uncleared variables Done checking for uncleared variables Report: SYSGEN_ASYNCMAC=1 SYSGEN_COMMCTRL=1 SYSGEN_COMMDLG=1 SYSGEN_CORELOC=1 SYSGEN_CORESTRA=1 SYSGEN_CPP_EH_AND_RTTI=1 SYSGEN_CREDMAN=1 SYSGEN_CTLPNL=1 SYSGEN_DEVICE=1 SYSGEN_DISPLAY=1 SYSGEN_FMTMSG=1 SYSGEN_FONTS_TAHOMA_1_07=1 SYSGEN_FSDBASE=1 SYSGEN_FSPASSWORD=1 SYSGEN_FULL_CRT=1 SYSGEN_GRADFILL=1 SYSGEN_IMAGING=1 SYSGEN_IMAGING_BMP_DECODE=1 SYSGEN_IMAGING_GIF_DECODE=1 SYSGEN_IMAGING_JPG_DECODE=1 SYSGEN_IMAGING_PNG_DECODE=1 SYSGEN_IMM=1 SYSGEN_INETCPL=1 SYSGEN_IPHLPAPI=1 SYSGEN_MINGDI=1 SYSGEN_MINGWES=1 SYSGEN_MININPUT=1 SYSGEN_MINWMGR=1 SYSGEN_MLANG=1 SYSGEN_MSGQUEUE=1 SYSGEN_NDIS=1 SYSGEN_NDISUIO=1 SYSGEN_NKCOMPR=1 SYSGEN_NKMAPFILE=1 SYSGEN_NLED=1 SYSGEN_OLE=1 SYSGEN_SERDEV=1 SYSGEN_SERVICES=1 SYSGEN_SHDOCVW=1 SYSGEN_SOFTKB=1 SYSGEN_STDIO=1 SYSGEN_STDIOA=1 SYSGEN_STOREMGR=1 SYSGEN_STRSAFE=1 SYSGEN_TAPI=1 SYSGEN_TCPIP=1 SYSGEN_TIMESVC_DST=1 SYSGEN_TOOLHELP=1 SYSGEN_UNIMODEM=1 SYSGEN_URLMON=1 SYSGEN_WCELOAD=1 SYSGEN_WEBVIEW=1 SYSGEN_WININET=1 SYSGEN_WINSOCK=1 sysgen_as_base=1 sysgen_as_file=1 sysgen_audio=1 sysgen_auth=1 sysgen_auth_ntlm=1 sysgen_auth_schannel=1 sysgen_autoras=1 sysgen_aygshell=1 sysgen_battery=1 sysgen_bth=1 sysgen_bth_ag=1 sysgen_certs=1 sysgen_connmc=1 sysgen_crypto=1 sysgen_cursor=1 sysgen_dotnet=1 sysgen_dotnet_support=1 sysgen_eap=1 sysgen_eth_80211=1 sysgen_ethernet=1 sysgen_fsadvertise=1 sysgen_fsreplbit=1 sysgen_help=1 sysgen_iabase=1 sysgen_ie_jscript=1 sysgen_irda=1 sysgen_menu_overlap=1 sysgen_modem=1 sysgen_msim=1 sysgen_notify=1 sysgen_obex_client=1 sysgen_obex_server=1 sysgen_pie=1 sysgen_pm=1 sysgen_ppp=1 sysgen_pptp=1 sysgen_qvgap=1 sysgen_redir=1 sysgen_shell=1 sysgen_standardshell=1 sysgen_tcpip6=1 sysgen_touch=1 The system cannot find the path specified. CE_MODULES=coredll nk msim commctrl commdlg shell relfsd loaddbg shellcelog secur32 ntlmssp spnego schannel rsaenh crypt32 msasn1 credman notify rnaapp connmc ndispwr netui asyncmac unimodem tcpstk tcpip6 ipv6hlp dhcpv6l irdastk winsock afd ws2 ws2i nstl wspm nspm ssllsp rtl8139 e100bex smsc100fd dp83815 ne2000 dhcp ethman wzcsvc wzcsapi pcx500 islp2nds wlclient wzctool eapol eap eapchap eaptls netmui ndisuio ndis autoras ppp ircomm tapi pptp redir netbios btsvc btd btdrt btagsvc bthuart bthamb bthsc bthcsr bthuniv wendyser wcestreambt sio950 iphlpapi softkb gwes keybd pointer display fonts waveapi audiodrv wavesamples cxport battdrvr nleddrvr device regenum busenum pm ceddk giisr mmtimer pci pcmconv serial pccard 8042keyboard nopkeyboard csp csp_mininput fsdmgr zlib filesys toolhelp vmini rt_tests COREDLL_COMPONENTS=coremain lmem showerr thunks corecrt corestrw cryptapi tnotify tapilib coresip rectapi wmgr_c mgdi_c accel_c messagedialogboxthunk shcore shortcut shexec shmisc fileopen fileinfo shellapis dsa timezones mmwave mmsnd mmmix battery nled devload coreimm fmtmsg corestra coresiow coresioa serdev coreloc multiui crt_cpp_eh_and_rtti full_crt crypthash rsa32 NK_COMPONENTS= nkcompr nkmapfile FILESYS_COMPONENTS=fsheap fsmain fsreg fsysram fsreplbit fsdbase fspass fsadvertise msgqueue DEVICE_COMPONENTS= devcore iorm pmif PM_COMPONENTS= pm_default_pdd pm_mdd pm_pdd_common GWE1_COMPONENTS=wmbase gweshare gwesmain immthunk msgque GSetWinLong CePtr foregnd idle kbdui uibase msgbeep audio GWE2_COMPONENTS=mgbase mgbitmap mgblt mgblt2 mgdc mgdibsec mgdraw mgrgn mgwinmgr tchui calibrui mggradfill mgalphablendstub mgtt mgdrwtxt mgpal mgpalnat GWE3_COMPONENTS=accel btnctl caret cascade imectl clipbd cmbctl defwndproc dlgmgr dlgmnem edctl gcache gwectrl icon iconcmn imgctl lbctl loadbmp loadimg menu menuscrl mOverlap MouseAndTouchCursor iconcurs mcursor mcursor8 cursor cursor8 mNoTapUI GWE4_COMPONENTS=nclient oom sbcmn scbctl startup stcctl winmgr startui oomui sbcmnview nclientview gcacheview btnctlview stcctlview cmbctlview lbctlview msgbox msgbox_hpc dlgmgr_hpc menu_hpc EditControlOs timer column atom drawmbar hotkey syscolor m gdx mgalias journal mgtci DCOM_MODULES= ole32 oleaut32 uuid OLE32_COMPONENTS=mcombase mcommem mcomstr mcommon mcomlib ole232 docfile msf exp mcomstm GDIEX_MODULES= imaging IMAGING_COMPONENTS= img_png img_libpng img_pngdecoder img_gif img_liblzw img_gifdecoder img_jpeg img_jpegfull img_jpegmem img_jpegdecoder img_bmp img_bmpdecoder IE_MODULES= shdoclc shdocvw inetcpl urlmon wininet shlwapi uuid ieceext mlang SCRIPT_MODULES= jscript SERVERS_MODULES= obexapi obexsrvr timesvc services SHELLSDK_MODULES= aygshell SHELL_MODULES= explorer shcore ceshell qvgap CESHELL_COMPONENTS= ceshapi ceshui taskbarlist SHCORE_COMPONENTS= shcore path WCESHELLFE_MODULES= htmlview peghelp browser iexplore webview msscript control ctlpnl cplmain AdvBacklight connpnl intlp bthpnl DATASYNC_MODULES= cefobj repllog rapisrv eventrst rra_stm systemcpl udp2tcp wceload unload NETCF_MODULES= dotnet Sysgening platform C:\WINCE500\platform\smdk2410 Sysgening platform C:\WINCE500\platform\smdk2410 \WINCE500\build.err C:\WINCE500\build.err C:\WINCE500\build.log 2 file(s) copied. BLDDEMO: There were errors building Test4 Test4 - 0 error(s), 0 warning(s) ------------------------------------------------------------------------------------------------ the build.log file are Starting sysgen phase for project ( common ) Found localized resources for Languages ( 0404 0407 0409 040C 0410 0411 0412 0413 0416 041D 0804 0C0A) Microsoft (R) Program Maintenance Utility Version Test Version Copyright (C) Microsoft Corporation. All rights reserved. Windows CE Version (Release) (Built on Mar 1 2004 21:46:39) makefile.def: Invoked with predefined settings: TARGETNAME: dummy TARGETTYPE: dummy RELEASETYPE: TARGETLIBS: SOURCELIBS: makefile.def: BUILDROOT is C:\WINCE500\public\common\cesysgen 0 Please add _COMMONPUBROOT and __PROJROOT to your tree's cesysgen\sources file. Directory: C:\WINCE500\PUBLIC\COMMON\CESYSGEN TARGETNAME: dummy RELEASETYPE is not defined. Using DEFAULT. makefile.def: Including C:\WINCE500\public\common\oak\misc\sources.ReleaseType_DEFAULT Creating appropriate directories and deleting COMMON.LOC Copying base resources to C:\WINCE500\public\common\oak\lib\ARMV4I\retail\0409 mkdir C:\WINCE500\public\common\oak\lib\ARMV4I\retail\0409 > nul 2>&1 xcopy /I C:\WINCE500\public\common\oak\lib\ARMV4I\retail\*.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\0409 C:\WINCE500\public\common\oak\lib\ARMV4I\retail\btsvc.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\cacjpn.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\calibrui.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\cerdisp.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\chajeiim.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\cmd.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\commctrlbase.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\commctrlviewxp.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\commctrl_hpc.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\commctrl_ppc.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\commctrl_tpc.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\commdlg.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\connmc.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\console.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\coreloc.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\coreres.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\crypt32.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\cursor2.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\cursor8.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\eventlog.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\eventlogmsgs.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\fatutil.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\filesys.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\fmtres.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\gcacheview.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\gcacheviewxp.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\gsm610.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\hwxcht.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\hwxjpn.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\hwxkor.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\hwxusa.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\imejpp.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\imejppui.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\imeskdic.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\imjp31.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\imjp31c.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\imjp31dx.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\imjp31dx_q.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\imjp31dx_q_ppc.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\imjp31k.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\imjp31m.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\imjp31u.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\imjp31ux.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\imjp31u_q.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\imjpskin.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\imjpskin_ppc.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\imjpskin_xp.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\inksamp.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\inksamp2.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\ipsecsvc.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\lap_pw.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\largekb.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\mboxcht.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\mboxkor.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\mcursor1.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\menu.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\msallchar.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\msfilter.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\msgbox_hpc.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\msgbox_ppc.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\msim.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\mskana.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\msradlist.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\msroma.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\msstrklist.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\multibox.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\net.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\netmui.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\netui.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\notifpub.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\oomui.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\pegterm.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\phonim.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\ppp2app.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\prnerr.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\rnaapp.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\scwcsp.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\scwcspgui.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\shcore.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\shexec.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\shmisc.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\shortcut.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\sipselect.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\softkb.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\startui.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\tapi.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\termctrl.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\testime.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\timezones.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\unimodem.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\unimodemnl.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\uspce.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\waveapi.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\wldap32.res 94 File(s) copied C:\WINCE500\public\common\oak\lib\ARMV4I\retail\ccrtcmtr.pdb C:\WINCE500\public\common\oak\lib\ARMV4I\retail\ccrtconv.pdb C:\WINCE500\public\common\oak\lib\ARMV4I\retail\ccrtcpu1.pdb C:\WINCE500\public\common\oak\lib\ARMV4I\retail\ccrtcrtw.pdb C:\WINCE500\public\common\oak\lib\ARMV4I\retail\ccrteh.pdb C:\WINCE500\public\common\oak\lib\ARMV4I\retail\ccrtfcnv.pdb C:\WINCE500\public\common\oak\lib\ARMV4I\retail\ccrtfpw.pdb C:\WINCE500\public\common\oak\lib\ARMV4I\retail\ccrtfpw1.pdb C:\WINCE500\public\common\oak\lib\ARMV4I\retail\ccrtheap.pdb C:\WINCE500\public\common\oak\lib\ARMV4I\retail\ccrthelp.pdb C:\WINCE500\public\common\oak\lib\ARMV4I\retail\ccrtlowi.pdb C:\WINCE500\public\common\oak\lib\ARMV4I\retail\ccrtmisc.pdb C:\WINCE500\public\common\oak\lib\ARMV4I\retail\ccrtrtti.pdb C:\WINCE500\public\common\oak\lib\ARMV4I\retail\ccrtstcp.pdb C:\WINCE500\public\common\oak\lib\ARMV4I\retail\ccrtstio.pdb C:\WINCE500\public\common\oak\lib\ARMV4I\retail\ccrtstrg.pdb C:\WINCE500\public\common\oak\lib\ARMV4I\retail\ccrtstrt.pdb C:\WINCE500\public\common\oak\lib\ARMV4I\retail\ccrttran.pdb 18 File(s) copied C:\WINCE500\public\common\oak\lib\ARMV4I\retail\strsafea.pdb 1 File(s) copied nmake /NOLOGO C:\WINCE500\PBWorkspaces\Test4\WINCE500\smdk2410_ARMV4I\cesysgen\sdk\lib\ARMV4I\retail\corelibc.lib makefile.def: Invoked with predefined settings: TARGETNAME: corelibc TARGETTYPE: LIBRARY RELEASETYPE: SDK TARGETLIBS: SOURCELIBS: C:\WINCE500\public\common\oak\lib\ARMV4I\retail\ccrtstrt.lib makefile.def: BUILDROOT is C:\WINCE500\public\common\cesysgen 0 Please add _COMMONPUBROOT and __PROJROOT to your tree's cesysgen\sources file. Directory: C:\WINCE500\PUBLIC\COMMON\CESYSGEN TARGETNAME: corelibc makefile.def: Including C:\WINCE500\public\common\oak\misc\sources.ReleaseType_SD 'C:\WINCE500\PBWorkspaces\Test4\WINCE500\smdk2410_ARMV4I\cesysgen\sdk\lib\ARMV4I\retail\corelibc.lib' is up-to-date Copying fulllibc.* Copying xlock.* COREDLL_RESOURCES=C:\WINCE500\public\common\oak\lib\ARMV4I\retail\0409\coreres.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\0409\shcore.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\0409\shortcut.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\0409\shexec.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\0409\shmisc.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\0409\timezones.res C:\WINCE500\public\common\oak\lib\ARMV4I\retail\0409\coreloc.res res2res %COREDLL_RESOURCES% -fo C:\WINCE500\PBWorkspaces\Test4\WINCE500\smdk2410_ARMV4I\cesysgen\oak\target\ARMV4I\retail\0409\coredll.res Res2Res for Windows CE (Debug) (Built on Jun 11 2004 10:49:59) Copyright (C) Microsoft Corp. 1991-2004. All rights reserved. Res2Res: Using C:\WINCE500\public\common\oak\Bin\i386\R2RDUMMY.DLL for temp exe Res2Res: Using resources from C:\WINCE500\public\common\oak\lib\ARMV4I\retail\0409\coreres.res. Res2Res: Adding resources from C:\WINCE500\public\common\oak\lib\ARMV4I\retail\0409\coreres.res to C:\DOCUME~1\AAlGrou\LOCALS~1\Temp\R2R94.tmp. Res2Res: Using resources from C:\WINCE500\public\common\oak\lib\ARMV4I\retail\0409\shcore.res. Res2Res: Adding resources from C:\WINCE500\public\common\oak\lib\ARMV4I\retail\0409\shcore.res to C:\DOCUME~1\AAlGrou\LOCALS~1\Temp\R2R94.tmp. Res2Res: Using resources from C:\WINCE500\public\common\oak\lib\ARMV4I\retail\0409\shortcut.res. Res2Res: Adding resources from C:\WINCE500\public\common\oak\lib\ARMV4I\retail\0409\shortcut.res to C:\DOCUME~1\AAlGrou\LOCALS~1\Temp\R2R94.tmp. Res2Res: Using resources from C:\WINCE500\public\common\oak\lib\ARMV4I\retail\0409\shexec.res. Res2Res: Adding resources from C:\WINCE500\public\common\oak\lib\ARMV4I\retail\0409\shexec.res to C:\DOCUME~1\AAlGrou\LOCALS~1\Temp\R2R94.tmp. Res2Res: Using resources from C:\WINCE500\public\common\oak\lib\ARMV4I\retail\0409\shmisc.res. Res2Res: Adding resources from C:\WINCE500\public\common\oak\lib\ARMV4I\retail\0409\shmisc.res to C:\DOCUME~1\AAlGrou\LOCALS~1\Temp\R2R94.tmp. Res2Res: Using resources from C:\WINCE500\public\common\oak\lib\ARMV4I\retail\0409\timezones.res. Res2Res: Adding resources from C:\WINCE500\public\common\oak\lib\ARMV4I\retail\0409\timezones.res to C:\DOCUME~1\AAlGrou\LOCALS~1\Temp\R2R94.tmp. Res2Res: Using resources from C:\WINCE500\public\common\oak\lib\ARMV4I\retail\0409\coreloc.res. Res2Res: Adding resources from C:\WINCE500\public\common\oak\lib\ARMV4I\retail\0409\coreloc.res to C:\DOCUME~1\AAlGrou\LOCALS~1\Temp\R2R94.tmp. Res2Res: Building C:\WINCE500\PBWorkspaces\Test4\WINCE500\smdk2410_ARMV4I\cesysgen\oak\target\ARMV4I\retail\0409\coredll.res from temp file C:\DOCUME~1\AAlGrou\LOCALS~1\Temp\R2R94.tmp. Set SizeOfResources: 0001f000 Set VirtualSize: 0001ecf8 SizeOfResources: 0001f000 SizeOfResources: 0001f000 SizeOfResources: 0001f000 nmake /NOLOGO coredll.dll makefile.def: Invoked with predefined settings: TARGETNAME: coredll TARGETTYPE: LIBRARY RELEASETYPE: SDK TARGETLIBS: C:\WINCE500\public\common\oak\lib\ARMV4I\retail\corestub.lib C:\WINCE500\PBWorkspaces\Test4\WINCE500\smdk2410_ARMV4I\cesysgen\oak\target\ARMV4I\retail\0409\coredll.res SOURCELIBS: C:\WINCE500\public\common\oak\lib\ARMV4I\retail\coremain.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\lmem.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\showerr.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\thunks.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\corecrt.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\cryptapi.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\mincrypt_coredll.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\tnotify.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\tapilib.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\coresip.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\rectapi.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\wmgr_c.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\mgdi_c.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\accel_c.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\messagedialogboxthunk.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\shcore.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\shortcut.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\shexec.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\shmisc.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\fileopen.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\fileinfo.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\dsa.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\mmwave.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\mmsnd.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\mmmix.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\battery.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\devload.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\coreimm.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\fmtmsg.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\serdev.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\coreloc.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\multiui.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\rsa32.lib DLLENTRY: CoreDllInit makefile.def: BUILDROOT is C:\WINCE500\public\common\cesysgen 0 Please add _COMMONPUBROOT and __PROJROOT to your tree's cesysgen\sources file. Directory: C:\WINCE500\PUBLIC\COMMON\CESYSGEN TARGETNAME: coredll makefile.def: Including C:\WINCE500\public\common\oak\misc\sources.ReleaseType_SDK nmake /NOLOGO TARGETNAME=coredll_ALL RELEASETYPE=OAK C:\WINCE500\PBWorkspaces\Test4\WINCE500\smdk2410_ARMV4I\cesysgen\oak\lib\ARMV4I\retail\coredll_ALL.lib makefile.def: Invoked with predefined settings: TARGETNAME: coredll_ALL TARGETTYPE: LIBRARY RELEASETYPE: OAK TARGETLIBS: C:\WINCE500\public\common\oak\lib\ARMV4I\retail\corestub.lib C:\WINCE500\PBWorkspaces\Test4\WINCE500\smdk2410_ARMV4I\cesysgen\oak\target\ARMV4I\retail\0409\coredll.res C:\WINCE500\public\common\sdk\lib\ARMV4I\retail\corelibc.lib SOURCELIBS: C:\WINCE500\public\common\oak\lib\ARMV4I\retail\coremain.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\lmem.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\showerr.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\thunks.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\corecrt.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\cryptapi.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\mincrypt_coredll.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\tnotify.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\tapilib.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\coresip.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\rectapi.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\wmgr_c.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\mgdi_c.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\accel_c.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\messagedialogboxthunk.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\shcore.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\shortcut.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\shexec.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\shmisc.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\fileopen.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\fileinfo.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\dsa.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\mmwave.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\mmsnd.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\mmmix.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\battery.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\devload.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\coreimm.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\fmtmsg.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\serdev.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\coreloc.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\multiui.lib C:\WINCE500\public\common\oak\lib\ARMV4I\retail\rsa32.lib DLLENTRY: CoreDllInit makefile.def: BUILDROOT is C:\WINCE500\public\common\cesysgen 0 Please add _COMMONPUBROOT and __PROJROOT to your tree's cesysgen\sources file. Directory: C:\WINCE500\PUBLIC\COMMON\CESYSGEN TARGETNAME: coredll_ALL makefile.def: Including C:\WINCE500\public\common\oak\misc\sources.ReleaseType_OAK NMAKE : fatal error U1073: don't know how to make 'C:\WINCE500\public\common\oak\lib\ARMV4I\retail\coremain.lib' Stop. NMAKE : fatal error U1077: 'C:\WINCE500\sdk\bin\i386\nmake.exe' : return code '0x2' Stop. NMAKE : fatal error U1077: 'C:\WINCE500\sdk\bin\i386\nmake.exe' : return code '0x2' Stop. Microsoft (R) Program Maintenance Utility Version Test Version Copyright (C) Microsoft Corporation. All rights reserved. Cefilter platform files Windows CE Version (Release) (Built on Mar 1 2004 21:46:39) cefilter C:\WINCE500\platform\smdk2410\files\config.bib C:\WINCE500\platform\smdk2410\cesysgen\files Cefilter for Windows CE (Release) (Built on May 11 2004 16:51:41) cefilter C:\WINCE500\platform\smdk2410\files\platform.bib C:\WINCE500\platform\smdk2410\cesysgen\files Cefilter for Windows CE (Release) (Built on May 11 2004 16:51:41) cefilter C:\WINCE500\platform\smdk2410\files\platform.dat C:\WINCE500\platform\smdk2410\cesysgen\files Cefilter for Windows CE (Release) (Built on May 11 2004 16:51:41) cefilter C:\WINCE500\platform\smdk2410\files\platform.db C:\WINCE500\platform\smdk2410\cesysgen\files Cefilter for Windows CE (Release) (Built on May 11 2004 16:51:41) cefilter C:\WINCE500\platform\smdk2410\files\platform.reg C:\WINCE500\platform\smdk2410\cesysgen\files Cefilter for Windows CE (Release) (Built on May 11 2004 16:51:41) Microsoft (R) Program Maintenance Utility Version Test Version Copyright (C) Microsoft Corporation. All rights reserved. Windows CE Version (Release) (Built on Mar 1 2004 21:46:39) ------------------------------------------------ Tag: insertion of a 32-bit cardbus card get a detection of a 16-bit card Tag: 80467

Windows CE 5.0 with a TI1520 PC card controller.

I have two 32-bit cardbus cards being workable on PC. However, when I
inserted any of them into one of the TI sockets, the "Present-State"
register associated with the socket showed a value of dwPStateReg =
0x30000910. According to TI's manual, this value indicates that the
socket supports 3/5 voltages and detected a 16-bit card in the socket.
After that, the MDD showed the following messages.

pcc_serv.DLL : CreatePCCardEnabler 16 Bit PCMCIA Card !!!

and

CPCPcmciaCard::GetConfigureRegisterBase: Can't get PCMCIA register
address. return FAILS

Does anyone experience the same?

Top

Re: insertion of a 32-bit cardbus card get a detection of a 16-bit card by cflin

cflin
Thu Feb 09 08:02:30 CST 2006

In other words, did anyone successfully use a cardbus card on TI
PCI1520?

Top