SL811H USB host driver

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - how to use ISAPI programming I use VC build a ISAPI project and creat a static .dll file. This file run correctly in windows XP,but cannot run in WinCE.net. I have added all of the component in Web Server(httpd) when building Core. I have tried to do this with EVC,but EVC cannot build a ISAPI project .Can someone give me some advice? yours xuhao Tag: SL811H USB host driver Tag: 86426
  - 2
    - Why does the AC97 driver configure the GPIO Hi All, I am reading the samsung s2440 Ac97 driver. The AC97 use the IIS bus ,and why does it configure the GPIO as following: BOOL HardwareContext::AC97_Init() { RETAILMSG(AC97_DEBUG,(_T("WAVDEV_AC97::AC97_Init()++\r\n"))); //----- 1. IMPORTANT: By default, the internal clock is disabled. To configure the controller ------ // we must first enable it. g_pCLKPWRreg->rCLKCON |= AC97_INTERNAL_CLOCK_ENABLE; // Enable the CPU clock to the AC97 controller AC97_GPIO_Init(); v_pAC97regs->rAC_GLBCTRL = 0; Delay(10); //Sleep(5); // Write into the AC97 Global Control Register //Cold Reset v_pAC97regs->rAC_GLBCTRL = 0x1; Delay(10); //Sleep(5); v_pAC97regs->rAC_GLBCTRL = 0x0; Delay(10); //Sleep(5); //AC-link On v_pAC97regs->rAC_GLBCTRL = (1<<2); Delay(10); //Sleep(5); //Transfer data enable using AC-link v_pAC97regs->rAC_GLBCTRL = v_pAC97regs->rAC_GLBCTRL | (1<<3); Delay(10); //Sleep(5); // Disable the Codec ready Interrupt v_pAC97regs->rAC_GLBCTRL = v_pAC97regs->rAC_GLBCTRL | (1<<22); Delay(10); //Sleep(5); //while (!(v_pAC97regs->rAC_GLBSTAT& 0x400000)); RETAILMSG(AC97_DEBUG,(_T("WAVEDEV_AC97::AC97 Codec Ready!\r\n"))); v_pAC97regs->rAC_GLBCTRL &= ~(0x400000); // codec ready interrupt disable Delay(10); //Sleep(5); v_pAC97regs->rAC_GLBCTRL = (v_pAC97regs->rAC_GLBCTRL & ~(0x3f<<8)) | 0x0000; // PCM_OUT=OFF,PCM_IN=OFF,MIC=OFF; //v_pAC97regs->rAC_GLBCTRL = (v_pAC97regs->rAC_GLBCTRL & ~(0x3f<<8)) | 0x2200; // PCM_OUT=DMA,PCM_IN=OFF,MIC=DMA; RETAILMSG(AC97_DEBUG,(_T("WAVDEV_AC97::AC97_Init()--\r\n"))); return TRUE; } void AC97_GPIO_Init() { //----- 2. Configure the GPIO pins for AC97 mode ----- // // AC_SDATA_OUT - GPE4 // AC_SDATA_IN - GPE3 // AC_nRESET - GPE2 // AC_BIT_CLK - GPE1 // AC_SYNC - GPE0 // // Port Init for AC97 //PG[4:0]=AC_SDATA_OUT:AC_SDATA_IN:AC_nRESET:AC_BIT_CLK:AC_SYNC v_pIOPregs->rGPECON = ((v_pIOPregs->rGPECON & 0xfffffc00) | 0x3ff); v_pIOPregs->rGPEUP = (v_pIOPregs->rGPEUP & ~(0x1f)) | 0x1f; } Many thanks, Peter Tag: SL811H USB host driver Tag: 86425
  - 3
    - Compact Framework 2.0 in PB 4.2 Hello, My system: PXA255, 32 MB FLASH, 64 MB RAM, Platform Builder 4.2. I would like to run aplications made with Compact Framework 2.0. So, I have installed the CF 2.0 cab in my system. After doing this, the applications work fine. But when I reset the system, I lost the compact framework configuration. In the installation, some of the files are always stored in Windows folder, no matter what folder you choose on the installation. The new files in the Windows folder are stored in RAM, so when you reset the system, all the files are lost. If I choose the flash folder to make the installation and I save the registry to make the changes persistent, the result is the same I have tried to include CF 2.0 in my Operating System image with no result. I have included all the files of the cab in a BIB file, and all the registry entries in a REG file of the image. When I load this image in my system, I have checked that all the files needed are in the windows folder, and all the registry entries are in the registry. Everything is fine, but the CF2.O aplications doesn't work. I think that CF 2.0 , in its initialization , checks if the files are in ROM, and if so, it reports an error and stops working. Is it possible to include CF2.0 in an Operating System image using this method? Is there another solution? Thanks in advance. Javi. Tag: SL811H USB host driver Tag: 86422
  - 4
    - Unable to play Media file in WinCE 5.0 Hi All, I built the Webpad project using the Platform builder. Webpad project supports the Media player application. I think, Webpad project enables all the codecs. I executed the Nk.bin image and in the desktop, I am able to see the media player application. ---------- When I play the ".wmv" file using the media player, the media player is showing the error "One of the required codecs for this file is not available. Playback will continue with reduced functionality". ---------- And when i paly the ".mpg" file using the media player, the media palyer is showing the error "Cannot open '\Storage Card\movie.mpeg". Please verify that the path and filename are correct and try again (0x80040200). ---------- Could you please help me, how to solve this problem. Thanks Aby Tag: SL811H USB host driver Tag: 86421
  - 5
    - cannot open stdio.h error hello everyone, none of my c n c++ programs on my turbo c complier is running as it shows 2 errors: unable to open "stdio.h" n "conio.h". i ve checked the INCLUDE folder n the header file is there. please help. Tag: SL811H USB host driver Tag: 86420
  - 6
    - Does the stream device have the recived/send buffer?If yes,where does it define? Hi All, When I write the MC8051 program,there is buffer to recive or send the date in the UART communication.And if there is date recived we can read the buffer directly instead of reading the bit one by one according to the timing graph. However,Does the WinCE driver program have the same mechanism as MC8051? If yes ,generally where is the buffer defined?Is it a register? For example,the driver of the AC97 ,...\WINCE420\PUBLIC\COMMON\OAK\DRIVERS\WAVEDEV\UNIFIED\ENSONIQ\ How does the chip read the media file and render?Is it one bit by one bit,or read the buffer? Thanks, Peter Tag: SL811H USB host driver Tag: 86419
  - 7
    - WinCE Update releases for the month of May 2006 Updates for Microsoft® Windows® CE are now available as a monthly rollup, as opposed to the previous weekly release schedule. The Microsoft® Windows® CE update rollup will be released the second Tuesday of every month, the latest release occurring on May 13, 2006. The following updates for Windows CE have been recently released and are available for download. More information for each update is provided in the Readme document available after the individual update(s) has been installed. Windows CE 5.0 Update name: Windows CE 5.0 Platform Builder Monthly Update (May 2006) Download link: http://www.microsoft.com/downloads/details.aspx?FamilyID=4b6c0537-0889-455b-ae11-5763272020ce&displaylang=en Description: This is a set of updates for Windows CE Platform Builder released during the period of May 1 - May 31, 2006. These Microsoft Windows CE updates are fixes for Windows CE operating system problems you run into during the development and maintenance of your custom platform. Windows CE 4.2 Update name: Windows CE .NET 4.2 Platform Builder Monthly Update (May 2006) Download link: http://www.microsoft.com/downloads/details.aspx?FamilyID=4e670d6b-46b5-488e-a89a-9e3c757c0271&displaylang=en Description: This is a set of updates for Windows CE .NET Platform Builder released during the period of May 1 - May 31, 2006. These Microsoft Windows CE .NET updates are fixes for Windows CE .NET operating system problems you run into during the development and maintenance of your custom platform. Windows CE 5.0 Networked Media Device Feature Pack: Update name: Windows CE 5.0 Networked Media Device Feature Pack Monthly Update (May 2006) Download link: http://www.microsoft.com/downloads/details.aspx?FamilyID=349f636f-94f5-4038-ab0a-ab2ee7818bcd&displaylang=en Description: This is a set of updates for the Windows CE 5.0 Networked Media Device Feature Pack released during the period of May 1 - May 31, 2006. These Microsoft Windows CE updates are fixes for the Windows CE operating system problems you run into during the development and maintenance of your custom Networked Media Device platform. Download Link - directs you to the Microsoft Download Center page associated with each update. Each update is contained in a self-extracting compressed file. Component - displays the module(s) updated in each update Description - provides more information on the issue(s) fixed **DO NOT REPLY - THIS E-MAIL IS BEING SENT TO YOU FROM AN UNMONITORED ACCOUNT. Due to Microsoft's security requirements, the hyperlink(s) contained in this e-mail may not automatically open your browser. If you experience any difficulty, please copy the link and paste into your browser. ** Tag: SL811H USB host driver Tag: 86411
  - 8
    - Media player doesn't have sound when play mpeg/mpg file Hello, I use PB5.0 and I added almost all audio and video components, nut when I play .mpeg or .mpg file, I got "One of the required codecs for this file is not available. Playback will continue with reduced functionality", and then Media Player will play that file, but no sound at all. If I play .wav file, it's OK. Could you tell me what kind of components I missed? Thank you very much! Tag: SL811H USB host driver Tag: 86408
  - 9
    - Interrupt periority: LA I am trying to find out where the interrupt periority is assigned for the network port. I have LAN91c111 ethernet chip and I want to assign it a higher interrupt periority. Any help Tag: SL811H USB host driver Tag: 86403
  - 10
    - PB IDE: Platform Folder Won't Open I'm having a wierd problem with PB 5.0. I've been happily doing BSP work, but then at some point, the "IDE-->File View-->c:\WINCE500-->Platform Folder" won't open. When I start PB, there's a "+" sign on it begging me to open it. I click the folder, and hear the hard drive whirr, and then I just get a folder with no "+" sign on it. While I can't be positive whether I ever had the Private folder openning with files to show, it is doing the same thing. The Public folder, however, is openning as usual. I think this happenned while I was preparing a binary BSP for someone (deleted all source and modified DIRs directories). It's like PB thinks the source is still gone but actually it's there and the DIRs files are right. Is there a file I need to delete to force PB to rebuild some internal table so the UI knows about it? Note: I can do Sysgen's & "build and sysgen current bsp" happily and get my image as usual. I'm really stuck. I'd hate to have to reinstall PB. Thougths? --Bruce Tag: SL811H USB host driver Tag: 86394
  - 11
    - Image getting corrupted? I have an image that runs out of flash. The first time - directly after download and flash write, the image does not boot properly. Resetting the device works. Resetting the device it seems to work fine. Then after a while, it fails again.... ======================================= first boot failure ======================================= CE Kernel for ARM (Thumb Enabled) Built on Jun 24 2004 at 18:21:58 ProcessorType=0411 Revision=7 sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 9aa9c1e0 XSCDBG:Trace initialized: CFG:801470c4 Buffer: 80145b98, 14f0Error Reporting Memory Reserved, dump size = 00020000 Booting Windows CE version 5.00 for (ARM) &pTOC = 9aa89d1c, pTOC = 9c58edf8, pTOC->ulRamFree = 8016b000, MemForPT = 00000000 Old or invalid version stamp in kernel structures - starting clean! Configuring: Primary pages: 15728, Secondary pages: 0, Filesystem pages = 7864 Booting kernel with clean memory configuration: Memory Sections: [0] : start: 8016c000, extension: 00004000, length: 03d70000 Sp=ffffc7cc ARMInit done. Windows CE KernelInit Updated eptr->e32_vsize to = 000c3000 Scheduling the first thread. 0x83edf024: KernelInit2: pCurThread=83edf024 hCurThread=03edf266 hCurProc=03edf002, KernelInit = 9aaaa084 0x83edf024: Detecting VFP...0x83edf024: VFP Not Found!0x83edf024: Updated eptr->e32_vsize to = 00006000 0x83edf024: first = 01e30000, last = 02000000, SharedDllBase = 02570000 ================================================== subsequent failure =================================================== Booting kernel with existing memory configuration: Memory Sections: [0] : start: 8016c000, extension: 00004000, length: 03d70000 ERROR: c:\macallan\private\winceos\coreos\nk\kernel\physmem.c line 284: RemovePage : removing invalid address 0x01262000 (PFN 0x00062000) NK Kernel: DEBUGCHK failed in file c:\macallan\private\winceos\coreos\nk\kernel\physmem.c at line 285 Tag: SL811H USB host driver Tag: 86393
  - 12
    - ASP on CE Are there some definitive documents on using ASP on a CE5 web server. Interested in ASP scripting. Thx -- David Jones Senior Lecturer School of Electrical & Computer Engineering RMIT University +61 3 99255318 Tag: SL811H USB host driver Tag: 86391
  - 13
    - .NET Compact Framework support in PB 5.0 Hi all, I am helping to develop a custom BSP for a proprietary board using PB 5.0. I would like to find out if .NET CF (compact framework) support comes for free in PB 5.0, or if some additional development in the BSP (such as the OAL layer) is needed to support .NETCF. Any help on this topic is appreciated. Tag: SL811H USB host driver Tag: 86380
  - 14
    - Windows CE - Audio not working Hi WinCE is running on AU1200 MIPS Processor. Downloaded BSPs that are already available for AU1200 from bSquare. After downloading the run time image on the target machine, there is no audio/sound detected. While building the image, PSC_12S and PSC_SMBus drivers for audio (PDD) have been used. If software mixer registry settings are used then the image can't be visible on target even though it is loaded successfully, so software mixer settings in PSC_12S.reg is commented (and the image is appearing properly but with no sound). The following is some portion of the log Windows CE Kernel for MIPS Built on Jun 24 2004 at 18:24:50 +OEMInit AMD Alchemy Au1200/Db1200 Cold Boot Using RTCTICK tick source BootArgs are at A00FFC00, SIG = 544f4f42 Eshell Flags = 0x0, KitlTransport = 0x1 Au1200 AC (PRId 04030201) @ 396MHZ -OEMInit OIC() irq=0000002C *** PlatCardSetSocket : 0 Initializing PSC0 for SMBUS operation SMB: SMB_Init finished hardware initialization. PDD_AudioInitialize +PSC_I2S InitializePlatform Initializing PSC1 for I2S operation +PSC_I2S InitializeCodec WaitForMasterDone: Read Registry:0x110,TimeOut:0x1576b WaitForMasterDone: Read Registry:0x110,TimeOut:0x13e70 WaitForMasterDone: Read Registry:0x110,TimeOut:0x13e7d WaitForMasterDone: Read Registry:0x110,TimeOut:0x13e70 WaitForMasterDone: Read Registry:0x110,TimeOut:0x13e81 WaitForMasterDone: Read Registry:0x110,TimeOut:0x13e70 WaitForMasterDone: Read Registry:0x110,TimeOut:0x13e80 +PSC_I2S Codec Initialized +Initialize Registers +Registers Initialized -Platform Initialized +PSC_I2S InitializeDMA HalInitDmaChannel: Channel 0 initialized for I2S TX Using DMA channel for I2S input HalInitDmaChannel: Channel 1 initialized for I2S RX -InitializeDMA End OIC() irq=00006160 PDD_Audio Initialized PDD_AudioMessage: IOCTL_POWER_CAPABILITIES au1uart::HWInit - UnitIndex 3 is invalid Can anyone please tell me what might be the cause/reason for audio to not work properly. Thanks in advance With Regards Sudheer Tag: SL811H USB host driver Tag: 86376
  - 15
    - TouchCalibrate I use PB 4.2 to build a Windows CE system for samsung2410 board. I use RAM-based file system. I want to save the touch screen calibration infomation in a file when user calibrate it. when user called TouchCalibrate() function. After calibartion, I save the registry key: HKEY_LOCAL_MACHINE\Hardware\Devicemap\Touch "CalibrationData"="***" to a file,And then, there some software can write the CalibrationData to registry from the file we have been saved. I found the registry had changed to the new value. But it didn't calibrate, i.e. the system didn't use the new calibration data from the registry. My problem is, how to let the system to use the calibration data from the registry? Is there any others things I forget to set?how can i do! Thanks in advance! Tag: SL811H USB host driver Tag: 86372
  - 16
    - Hot Swap Feature in WinCE5.0 Hello Everyone, Currently I am working on WincE5.0 MainstoneII\ARM\PXA270 for one of my custom image. Most of the peripherals like usb mouse, keyboard and sd card are working with plug and play but the hot swap feature is not working. As I am very new to WinCE can someone please help me to sort out this? Thanks in advance. Kind Regards, Sandeep Dagar Fujitsu-Siemens Computers. Tag: SL811H USB host driver Tag: 86371
  - 17
    - WinCE COM port APIs problem.... Its urgent..... I am working on an application which uses port redirection and i need to implement it for WinCE device. The APIs which i found not supported on WinCE are as follows: BuildCommDCB BuildCommDCBAndTimeouts GetDefaultCommConfig SetDefaultCommConfig CommConfigDialog GetCommConfig SetCommConfig can anyone suggest me some alternative APIs for the above APIs (which works on WinCE )or some way implement these APIs ??? All suggestions/solutions are most welcome.. Thanks, Ansh Tag: SL811H USB host driver Tag: 86368
  - 18
    - Advance Backlight in Control Panel problem If we open the "Display" item in the Control Panel, there are one tab named "Backlight", use "tab" key in the keypad to enter the "Backlight" tab, then the advbacklight.dll will be loaded, then again use "tab" key in the keypad to walk through inside the "Backlight" tab, when "timeout" item is chose, the advbacklight.dll will be unloaded (it is strange), after that, if you use "tab" key in the keypad to open the "Advance" button, then Prefetch Abort: Thread=8fe1e550 Proc=8a1af040 'CTLPNL.EXE'. Anyone has the same problem? Why the advbacklight.dll will be unloaded when "timeout" item is chose? I think it cause the abort. Tag: SL811H USB host driver Tag: 86366
  - 19
    - How to setup Remote NDIS USB Driver Kit under win2k? I download Remote NDIS USB Driver Kit from microsoft website,but how to setup it under win2k system? Tag: SL811H USB host driver Tag: 86362
  - 20
    - How to transfer the USB context to NDIS handler? Hi,all I'm porting a USB2Network Driver from Win2k to WinCE 5.0. I get the usb_handle from USBDeviceAttach. Then NdisRegisterAdapter is called to tell NDIS to create a new device instance. Now I have a problem. When I get the usb_handle from USBDeviceAttach and store it in a device context, how can i pass the device context to other NDIS functions? In other words, in the NDIS functions like SendHandler, how can i get USB handle and usb_funcs to implement USB transfer? Thanks a lot in advance! Any help will be highly appreciated! Tag: SL811H USB host driver Tag: 86361
  - 21
    - QFE Search not working anymore? I always searched for new QFE's using this link: http://www.microsoft.com/downloads/results.aspx?freetext=qfe%205.0&productID=&categoryId=&period=&sortCriteria=date&nr=50&DisplayLang=en&type=a That worked great, but now for some reason whenever I search for "qfe 5.0", "Windows CE 5.0", "5.0 Platform Builder" nothing returns any hits anymore. It only returns hits if I omit the "5.0" string, but then I get everything for 4.2 and older versions as well (which is really annoying). Anybody noticed this change in behavior of the MS web search tool? ...annoyed... -- Michel Verhagen, eMVP Embedded Fusion www.embeddedfusion.com mverhagen at embeddedfusion dot com Tag: SL811H USB host driver Tag: 86354
  - 22
    - How to order PB 5.0? We need to upgrade our 4.2 Platform Builder to 5.0, but I'll be darned if I can find it searching the Microsoft web site. We tried asking Arrow but they say there are 100 different versions! 1. Can anybody direct me to the correct MS web site page and/or a part number to use when ordering the 5.0 upgrade from Arrow? 2. Is there a cheaper upgrade from 4.2 to 5.0, rather than buying a virgin copy of 5.0? 3. Is the eMbedded Visual C++ product still available for CE 5.0? We very much need the native compiler for our project, rather than the Studio stuff. Thanks, Michael Schwab Tag: SL811H USB host driver Tag: 86349
  - 23
    - Windows CE driver for Prism wireless card Hi to all, i'm configuring a rugged PC. For creating the Win CE 5.0 OS i'm using the platform builder. Everything seems to work except the Prism wireless card, because i can't find the correct driver. Someone can help me? Where can I find it? I think the producer of the card is Funkwerk. Thanks everyone. Tag: SL811H USB host driver Tag: 86342
  - 24
    - "Image Size" VS "Data Abort" VS "Code Space Full" Dear Sir, I use PXA27X and WINCE 5.0 to develop my project. I always see the following message in Image compile time. Code space full, fixing up <XYZ-1.dll> to ram space Code space full, fixing up <XYZ-2.dll> to ram space ... As my understanding, The size of XIP is 32MB , and all of my project's DLL is more than 32MB. so the "Code Space Full" message will be displayed. But the size of my project's NK.bin is 31.75MB , it is closed to 32MB. Does the size of XIP and the size of NK.bin have any relation? Should I enable multiple XIP if I do NOT want to see "Code Space Full" message ? Beside, when I execute any AP (Word-Viewer , Image-Viewer ... ) , system will display "Data Abort" message. Does this error message have any relation with XIP or Image Size ? How to fix this issue ? In config.bib , I reserve 48MB for NK. Is the Size NOT enough for my system ? Does anyone have idea about this issue ? BR, dirwdirw.tw Tag: SL811H USB host driver Tag: 86341
  - 25
    - How can I make up a CT69000 driver? Hello, All: I have been met a problem with producing a nk.bin file, and, my nk.bin cannot start up after running loadcepc.exe, I have noticed its production document, I found its display monitor is CT69000, and platform builder's help document tells me that I have to ensure the VESA supported package were packeted into its BIOS. However, I've no idea with if there's VESA support, and following the steps from the microsoft's documents of platform builder, I have used vesatest.exe to test it, it shows there's 10 types of display modes is supported. And I have done a thousands of searches and found little about CT69000. Can anybody tell me where I can get the CT69000's winCE.net's driver? Thanks in advance! Tag: SL811H USB host driver Tag: 86336
- Next
  - 1
    - CE 4.2 & Media Player Full Screen issues Folks, We have a handheld device with no keyboard, there's 1 5-way toggle & volume buttons, we also have Media Player 9 as part of the OS image. If we switch MediaPlayer to play in "Full Screen" mode, it appears that we have no way of "escaping" out of it without cold booting the device. Is this expected behaviour or did we miss something and there is a way to get out of full screen mode ? tia P.S. An answer other than the response to the old joke "Doctor, it hurts when i do this" would be appreciated :-) Tag: SL811H USB host driver Tag: 86335
  - 2
    - HELP: using net command with XP shared folder. Strange TCP/IP behavior. Hello to all NG, specially to Paul that in old posts has give some suggests to similar problems. I've this situation: WinCE 4.2 on PXA255 with bluetooth dongle and TCP/IP services installed, without any Wi-Fi or ethernet device. First step: I've to map a network share on a desktop PC running 2000/XP or 2003 and Microsoft/Widcomm bluetooth stack. On WinCE I'm able to discovery BT devices, map SPP port of my XP desktop PC, create a new dial-up connection that use the mapped virtual COM port (set VCOM parameters as 115200,N,8,1), create on XP desktop PC an new incoming connection (RAS and Routing service is enabled automatically by OS) using COM6 (the BT incoming port on desktop PC) and connect WinCE. The connection works fine, XP desktop PC gives a qualified IP to WinCE (from the range specified on TCP/IP properties of Incoming Connection profile) and from WinCE I can ping XP desktop PC either via IP number (192.168.0.100) either via name (as desktop but also as desktop.fulldomain.org). Then I try net view \\desktop and after credentials window it works When I try net view \\desktop.fulldomain.org it gives error 87 "net use \\desktop\shared local" works fine and I exchange files. Why using extended domain name I get error 87? However if I ping server or desktop2 I get bad ip address. Only if I use full domain name, as server.fulldomain.org or desktop2.fulldomain.org, ping works fine (in my network I've a DNS server and XP RAS pass to WinCE this DNS Server IP address). Second step: the shared folder is on a server in the network, but WinCE must use the dialup connection with the nearest desktop PC (BT range is 15 meters and I can't plug the BT dongle on the server, why it's very far from WinCE device) that is connected via ethernet cable to the same server network. The problem now, once connected via dial-up with XP desktop PC, is that from WinCE I can ping the server using its IP address or full domain name, but if I try to use ping server or net view \\server or net view \\server.fulldomain.org it doesn't work and return error 87. What does error 87 means? Every other tool that use TCP/IP (ping, tracert, route) using full domain name is working fine, also internet explorer with http is working fine with full domain names. How does "net" command translate the name of the XP desktop PC? It seems that it doesn't use DNS server settings but tries another way to translate the name in IP address but without success. Do I need a WINS server in my network that translate the names for WinCE device, and specify WINS address into TCP/IP setting of dialup profile? Why net view/use works only with the shared folders of the desktop PC that WinCE dial-in, but I can access full network trought the same desktop PC? It seems that problem is not at TCP/IP level, but at "Folder and Printers sharing" service, or in the way that net command tries to resolve name. Why I can use net view \\desktop with success and net view \\desktop.fulldomain.org doesn't works? However \\desktop and \\desktop.fulldomain.org are translated to the same IP address by DNS server, so it really seems that net command doesn't use DNS then! What kind of mechanism does net command use for translating names? P.S.: net view \\ppp_peer return error 53, but ping ppp_peer works fine. Anybody can give me any suggest? Thanks Tag: SL811H USB host driver Tag: 86333
  - 3
    - Install File System Development Hi, I'm trying to make a private IFS in WinCE, and working with Platform Builder in emulated environment with RamDisk. I have successfully implemented a null file system and have verified that the MyFSD.dll was loaded and unloaded. But after that, I have tried to implement some of the functions that FSD should provide for FSD Manager. Two of them, MyFSD_MountDisk() and MyFSD_UnmountDisk were implemented and the .def file was properly modified for FSDMGR to know that. (below) EXPORTS MyFSD_MountDisk MyFSD_UnmountDisk FSD_MountDisk=MyFSD_MountDisk FSD_UnmountDisk=MyFSD_UnmountDisk MyFSD_... ....... After the implementation of the above, I was trying to see if the IFS was properly mounted, but found that the function MyFSD_MountDisk() was never called. DllMain() was called twice - DLL_PROCESS_ATTACH, DLL_PROCESS_DETACH. It was unloaded just after it was loaded. Does anyone can tell me any clue or suggestion? What should I do to mount a null file system? Do I have to change more of registery entries? Thanks in advance. Tag: SL811H USB host driver Tag: 86322
  - 4
    - OTG driver in PXA27x mainstone III DVK Hi, I am using Mainstone III DVK for developement and found that there are 2 USB OTG ports. However, I can't see any OTG driver/components in catalog. Do Platform Builder 5.0 and Mainstone III BSP provide any USB driver for our testing purpose? Thanks a lot. Best Regards, Tag: SL811H USB host driver Tag: 86317
  - 5
    - Does wince5.0 support Session Announcement Protocol (RFC2974) & Session Description Protocol (RFC2327) Hi,all. I have seen that the TAPI of wince5.0 is base on TAPI 2.0 & 2.1, but the SAP&SDP seem to be supported by TAPI 3.0 and later. So I don't quite sure that if wince 5.0 support SAP & SDP. If it does, which dll or component offers this? Walzer Tag: SL811H USB host driver Tag: 86314
  - 6
    - Does wince5.0 support Session Announcement Protocol (RFC2974) & Session Description Protocol (RFC2327) Hi,all. I have seen that the TAPI of wince5.0 is base on TAPI 2.0 & 2.1, but the SAP&SDP seem to be supported by TAPI 3.0 and later. So I don't quite sure that if wince 5.0 support SAP & SDP. If it does, which dll or component offers this? Walzer Tag: SL811H USB host driver Tag: 86313
  - 7
    - Does wince5.0 support Session Announcement Protocol (RFC2974) & Session Description Protocol (RFC2327) Hi,all. I have seen that the TAPI of wince5.0 is base on TAPI 2.0 & 2.1, but the SAP&SDP seem to be supported by TAPI 3.0 and later. So I don't quite sure that if wince 5.0 support SAP & SDP. If it does, which dll or component offers this? Walzer Tag: SL811H USB host driver Tag: 86312
  - 8
    - Compact Flash block size? Hi All, Does anyone know how to get the physical flash block size from a Compact Flash card? Without knowing the card manufacturer/flash/controller (etc) is there any way of enquiring this information from the card? Many thanks, Gordon. Tag: SL811H USB host driver Tag: 86305
  - 9
    - Question about Virtual memory limitations in WinCE Hi, While I was going through the code for the bootloader, it was mentioned that the virtual memory cannot be more than 512MB. Is this limitation because of winCE, which can handle only a maximum of 512MB physical memory. Or does it have any other reason? If we have to increase this limit, is there any possible way to do it. Warm Regards, Naveen Atmakuri. Tag: SL811H USB host driver Tag: 86301
  - 10
    - invalid handle returned from SD API Hi, I am trying to develop a SDIO device driver using Evc++. The target device is an imate PPC. I am not using platform builder, as i am not to use a development board, but just write a driver for the PPC device which has an OS already. My device has an SDBusdriver.dll So i am thinking that i should develop a host controller driver and a client driver. Initially i am doing an SD card Client Driver and will try to modify it from there.( Dont know if this is a good way to proceed) I am currently modifying the registry in the HKLM/Drivers/...../SDMemory_Class to replace the existing sdmemory.dll client driver with my own SD card driver called MySD.dll. I encountered the following problem in my driver code. in the xxx_init, i have called the SDGetDeviceHandle(param1,param2) API. I get the HKLM/...../SDMemory_Class path in the param2 variable and got a value for the handle returned by the API. I used the Remote tools from EVC++ and in remote registry editor i checked the active list of drivers. It showed one subkey as 'Hnd' and onemore subkey as 'ClientInfo'. The handle value got from the API is the same as the value in ClientInfo and not the one in Hnd.I expected the value to be the one in 'Hnd' and not the one in 'ClientInfo'. Is this a problem? if so how to correct it? Next, i called the SDRegisterClient(...) API with the handle returned by the SDGetDeviceHandle API as one of the parameters to SDRegisterClient. But this is causing an error, and the error code is 0xC0000006. I understand that this status implies an INVALID HANDLE. However, since the SDGetDeviceHandle API returned me the correct registry path, i think the handle must also be correct. I cant understand why the handle is invalid. I hope someone can help me out on this one. Thanks, Nag Tag: SL811H USB host driver Tag: 86299
  - 11
    - Bad response from PB to serial BOOTME request We're trying to implement a CE 5.0 serial bootloader for an ARM7-based target (we have no Ethernet and no USB). When trying to connect with PB, the target is reporting "received non-download packet type". A dump of the the received packet shows that the pktType field is 0xAA (KS_PKT_KITL). This is not one of the 3 packet types that RecvPacket() is expecting. All PB is doing is spitting out the following messages: The Kernel Debugger is waiting to connect with target. The Kernel Debugger has been disconnected successfully. What going on? Thanks, Scott Background info: Target CPU is an ARM7 in a custom ASIC. We are currently loading the code through a JTAG debugger. There is currently no way to flash the code on the board right now. The current target is a temporary interim device until our real target board is available. We've modified the CEPC SBOOT code to work with our hardware and have verified that the serial send and receive functions work. Debug messages (EdbgOutputDebugString(), etc.) are being routed throught the ARM7 DCC port using the semihosting support in our debugger. We're at the step where we're told to simply "Download the Eboot.bin file." Nowhere are we told how to accomplish this -- apparently newbies are just supposed to "magically know" how to do all of these things. We're assuming that PB's Target->Attach Device is the correct thing to do. PB's Target->Connectivity Options are set to Download=Serial, Transport=Serial, Debugger=KdStud (it defaulted that way and we haven't changed it). The serial settings for both Download and Transport match what our target is doing. The instructions so far have said to build the bootloader code using "build -c" command line. I've created a dummy project in PB using our platform that we created by cloning (since PB's Target->Attach Device menu item is grayed out unless you have a project open). Since there doesn't appear to be any way to change the location or name of the file being downloaded, we copied and renamed the test .bin file produced by "build -c" to the place PB wants to find it. The project has not been built since it won't (we're not that far along yet -- still trying to get the bootloader working). Sent boot req header: 6B 49 54 4C BB 00 24 00 67 9A Received response header: 6B 49 54 4C AA 70 20 00 71 FF Tag: SL811H USB host driver Tag: 86294
  - 12
    - Can a USB driver exposed functions like RS232 COM port? Hello Guys, I am writing a USB Device driver for a hand held device. Application software running on the device does not support USB, it only can make Serial COM port function calls. Can any one suggest me, how to write a USB driver which exposes functions like Serial COM port? Regards, Pranav Tag: SL811H USB host driver Tag: 86293
  - 13
    - Launch address of image Is the launch (start) address stored anywhere inside the image? I can derive things like physical start address an and size from the info in the stored image's TOC but I can't find where the launch address is stored. I know its available in the bin file as I can see it with the viewbin utility. I would like my bootloader to pull this info from a stored flash image. Is it possible? Tag: SL811H USB host driver Tag: 86286
  - 14
    - How to disable Wireless Zero Config On our WinCE 5.0 platform, we have a PCMCIA (actually CF) Prism2-based WiFi card. The built-in ISLP2 driver works fine with WZC, but we have our own WiFi connection manager that we would prefer to use. But if I disable WZC by unchecking its "Use Windows to configure my wireless settings" checkbox, my card doesn't seem to associate with AP's or get an IP, even though NDIS calls seem to indicate that I *am* associated nicely. If I enable WCZ, let it perform an initial association, and then disable it, then everything is good and my own wireless manager can happily associate and disssociate with AP's. Ideally, I would love to to totally remove WZC. But if I can't, then I would like it to be totally invisibile and unobtrusive. Is there a way to achieve this? -KB Tag: SL811H USB host driver Tag: 86282
  - 15
    - How do launch Remote Desktop Connection application on WinCE bootup? Hi, How do I auto launch Remote Desktop application (cetsc.exe) on WinCE bootup? I have added the following registry entry in platform.reg [HKEY_LOCAL_MACHINE\init] "Launch80"="cetsc.exe" "Depend80"=hex:14,00, 1e,00, 32,00 I get error message as parameter error. I see message "cetsc.exe started. Cmdline : '80' " It seems like from "LaunchXX" it takes XX as the command line argument. Any body can tell me what is going wrong? Thanks, Raghav Tag: SL811H USB host driver Tag: 86279
  - 16
    - ipod driver for wince 4.2? This may seem a strange question, but does anyone know whether there is a driver available for the ipod on wince 4.2. If not, does anyone have any idea what if any mods would need to be made to the usb system to handle loading a windows formatted ipod up as a usb mass storage device? Tag: SL811H USB host driver Tag: 86275
  - 17
    - Debug Message Format Hi all, I view the debug message in Platform Builder as showed below: 240503 PID:620e777a TID:81d0fa1a 0x81f91900: >>> Debug Message There are timestamps PID:number TID:number. But what does 0x81f91900 mean? Thanks in advanced, Brian Tag: SL811H USB host driver Tag: 86270
  - 18
    - Platform Builder 5 newbie question Hi! I can choose: Sysgen Build and Sysgen Build and Sysgen current BSP When do I choose each of these? Some experimenting shows that I have to do Sysgen the first time for a new platform, will Build and Sysgen current BSP suffice after that? Best regards, Fredrik Jansson Tag: SL811H USB host driver Tag: 86268
  - 19
    - Process Model "225bytes" in 2540N? Hi all, I read Windows CE Training Course 2540N and found one statement that I don't understand. It said (in Module 2-1): Virtual Address Slots 32 MB (225 bytes) of virtual address space per slot What does 255 bytes mean? Thanks in advanced, Brian Tag: SL811H USB host driver Tag: 86266
  - 20
    - How to let a thread be idle without using system call ? Hi, I do not want to call system call( ex: sleep) in our power handler functions. Without using system call, is there any other method to let thread be idle and release the CPU resource to other threads? Thanks. Yu. Tag: SL811H USB host driver Tag: 86250
  - 21
    - Power Handler function yield to low priority thread Hi, In our SD driver, I hope suspend/resume will not interrupt SD read/write. Hence, I wrote my code as following: ----------------------------------------------------------- Part 1: SD read/write code snippet EnterCriticalSection() // codes to read/write SD card LeaveCriticalSection() Part 2: SD power handler function DSK_PowerDown(void) { EnterCriticalSection() .... } DSK_PowerUp(void) { LeaveCriticalSection() .... } ----------------------------------------------------------- BUT, I found the following debug message: ERROR: Power Handler function yield to low priority thread. Is it a "ERROR"? Does it mean system is dangerous and unstable? How to solve this issue ? Thanks. Yu. Tag: SL811H USB host driver Tag: 86249
  - 22
    - CEPC with 1 GB RAM -> Backlink=0048 Hello, my Windows CE 5.0 image works well on all our CEPC x86 devices with up to 512 MByte Ram. For development reasons I would like to use a CEPC with 1GB RAM (I know this is not supported by Windows CE so I would like to use 512MB of the 1GB > only for development). If I boot my Windows CE 5.0 image on this CEPC I get a Backlink=0048 error. I do not know why it is not booting and using only 512MB RAM ... My OEMAddressTable: ; RAM 0x80000000 -> 0x00000000, size 512MByte dd 80000000h, 0, 20000000h ; Last entry, all zeros dd 0, 0, 0 In x86InitMemory I call IsDRAM with dwRAMAutoDetectSize=0x20000000: MainMemoryEndAddress += IsDRAM (MainMemoryEndAddress,g_dwRAMAutoDetectSize); (I have removed the if (MainMemoryEndAddress == g_dwRAMAutoDetectStart) ...) My Debug Output: 0 PID:0 TID:0 CEPC Firmware Init 0 PID:0 TID:0 RTC - Status Reg B - 0x02 0 PID:0 TID:0 g_dwCPUFeatures = a7e9f9bf 0 PID:0 TID:0 g_nMtrrCnt = 8 0 PID:0 TID:0 MTRR PhysMask0: 0000000fc0000800 0 PID:0 TID:0 MTRR PhysBase0: 0000000000000006 0 PID:0 TID:0 MTRR PhysMask1: 0000000ffff00800 0 PID:0 TID:0 MTRR PhysBase1: 000000003f700000 0 PID:0 TID:0 MTRR PhysMask2: 0000000fff800800 0 PID:0 TID:0 MTRR PhysBase2: 000000003f800000 0 PID:0 TID:0 MTRR PhysMask3: 0000000f00000000 0 PID:0 TID:0 MTRR PhysBase3: 0000000000000000 0 PID:0 TID:0 MTRR PhysMask4: 0000000f00000000 0 PID:0 TID:0 MTRR PhysBase4: 0000000000000000 0 PID:0 TID:0 MTRR PhysMask5: 0000000f00000000 0 PID:0 TID:0 MTRR PhysBase5: 0000000000000000 0 PID:0 TID:0 MTRR PhysMask6: 0000000f00000000 0 PID:0 TID:0 MTRR PhysBase6: 0000000000000000 0 PID:0 TID:0 MTRR PhysMask7: 0000000f00000000 0 PID:0 TID:0 MTRR PhysBase7: 0000000000000000 0 PID:0 TID:0 PhysMask0: 0000000fc0000800 0 PID:0 TID:0 PhysMask1: 0000000ffff00800 0 PID:0 TID:0 PhysMask2: 0000000fff800800 0 PID:0 TID:0 PhysMask3: 0000000f00000000 0 PID:0 TID:0 PhysMask4: 0000000f00000000 0 PID:0 TID:0 PhysMask5: 0000000f00000000 0 PID:0 TID:0 PhysMask6: 0000000f00000000 0 PID:0 TID:0 PhysMask7: 0000000f00000000 0 PID:0 TID:0 g_nMtrrInuse = 3 1 PID:0 TID:0 Double Fault -- backlink=0048 1 PID:0 TID:0 TSS=835973e0 EIP=80263cc8 Flags=00210086 1 PID:0 TID:0 Eax=00000000 Ebx=80241744 Ecx=03bb0045 Edx=00000000 1 PID:0 TID:0 Esi=c0020000 Edi=835b5780 Ebp=80241738 Esp=80241688 1 PID:0 TID:0 CS=0019 DS=0040 ES=0040 SS=0021 FS=0000 GS=0000 As mentioned above my image works well until I use 1GB RAM. Regards Peter Tag: SL811H USB host driver Tag: 86245
  - 23
    - CESH/Remote Tools and Account Permissions Hi, My Windows account is not an administrator, but rather a user. When I try to run any of the remote tools (remote registry editor for example) I get the following error: "The CESH Server for Windows CE reported the following error: Unable to establish a connection with the device. Please check server configuration settings." The error does not occur if I log into my machine using the administrator account. So I assume it is a permissions/privilege problem. Does anyone know what permissions/privileges need to change in order for the remote tools to work? I'm using CE5. Thanks, Chris P.S. Please don't just tell me to run as admin...that's a lame solution and should not be necessary. Tag: SL811H USB host driver Tag: 86236
  - 24
    - How do I get PB WinCE 4.2? Skinnable UI? I am trying to figure out the best way to give a Win CE 4.2 app an XP look and feel. I need to make the buttons appear with the XP skin. I have surfed the web and found that I need to employ the use of the SKINNABLEUI folder, but when I look for it on my device, it does not appear. What am I missing? Do I need to download something? Thanks. Tag: SL811H USB host driver Tag: 86228
  - 25
    - Viewing the catalog database In my \WINCE500\PUBLIC\COMMON\OAK\CATALOG\DATABASE directory I have two databases: pbdb.mdb and base_pddb.mdb. I assume that they contain the various list of SYSGEN's and corresponding descriptions. I would like to compile a list of these descriptions, but I can't open the database because it's password protected. (I don't know why it needs a password, but that's not the point of my post.) I can get a SYSGEN list from a command prompt, and I can get a list of component descriptions from the platform .log file, but there's nowhere that I can think of where I can get a list of corresponding SYSGEN's *and* their descriptions. Could someone who knows the DB password please email it to me? Or send me a way to extract the data from the DB? It would be much appreciated, and I would feel better about doing it this way than using one of the many Access password "recovery" tools out there. Best regards, Dan. Tag: SL811H USB host driver Tag: 86218

I have been struggling trying to get a USB host driver running for this chip
(SL811H) under CE 5.0.
I know there is an issue with auto address increment function.
I guess some of you have this running.
Any chance I can get the files?

thanks
davidves AT tampabay.rr.com

Top