eboot run Undefined instruction exception

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - SD host driver documentation? I would like to know if there is some documentation about the development of a SD host driver. I found the code of the PXA driver and the comments inside sdhcd.h but no documentation of SD host to SDBUS driver APIs. I did my first googlewacking* searching for SDHCDRegisterHostController and this is not a good thing... I know I can implement the driver using the existing one as sample etc., but having some docs detailing the expected behaviour of the functions that I'm going to implement would be better. * getting one and only one result from a google search http://www.unblinking.com/heh/googlewhack.htm -- Valter Minute (the reply address of this message is invalid) (l'indirizzo di reply di questo messaggio non è valido) Tag: eboot run Undefined instruction exception Tag: 94330
  - 2
    - Debug hang Hi, My system (PB5) hangs when trying to debug my headless device. The last debug information is here: 4294773756 PID:3f9a25a TID:c3f09f32 0x83efbb48: IPAddAddrComplete: IF A7990 ntecount 1, SAC 0 4294774313 PID:3f9a25a TID:c3f09f32 0x83efbb48: +OpenIFConfig(Comm\PCI\STE1001\Parms\TCPIP Handle 0x617FAFC) 4294774317 PID:3f9a25a TID:c3f09f32 0x83efbb48: Opened registry info for Comm\PCI\STE1001\Parms\TCPIP 4294774319 PID:3f9a25a TID:c3f09f32 0x83efbb48: -OpenIFConfig(Comm\PCI\STE1001\Parms\TCPIP *Handle 0x617FAFC, BOOL Ret: 1) 4294774322 PID:3f9a25a TID:c3f09f32 0x83efbb48: *CloseIFConfig(Handle 0x933E0) 4294774325 PID:3f9a25a TID:c3f09f32 0x83efbb48: IPAddAddrComplete: IF A9BA0 ntecount 1, SAC 0 4294830466 PID:3f9a25a TID:e3f2cf96 0x83f29b48: VMini:: Detected DHCP [REQUEST] 4294830477 PID:3f9a25a TID:a3f3ee2e 0x83e85aa0: SetDhcpConfig: set IPAddr D001A8C0 4294830483 PID:3f9a25a TID:a3f3ee2e 0x83e85aa0: SetDhcpConfig: set LeaseObtained e3f35e0d 10217420 4294830487 PID:3f9a25a TID:a3f3ee2e 0x83e85aa0: SetDhcpConfig: T1 a8c0 T2 12750 Lease 15180 Any idea what could be wrong? Thanks Ole Tag: eboot run Undefined instruction exception Tag: 94327
  - 3
    - Platform Builder download I was looking for the Platform Builder (better for the version 5.0 of CE) on the Internet but I could just find a evaluation version of Windows CE 5.0. My company is a Microsoft Gold Partner, so I tried even in the MSDN downloads, but I couldn't find it even there. Do you know what do I need to download it or if I am supposed to download the evaluation version and the ask to Microsoft for a key? Thank you in advance Cold Tag: eboot run Undefined instruction exception Tag: 94326
  - 4
    - WINCE hang Hi, I am using Samsung S3C2410 wince platform to interface with a wavecom modem. The wince system will change communication baud rate according to the signal strength. Somehow when this change happens, the wince seems hang. (But not every time) Any suggestion to debug this problem? regards Wanchope Tag: eboot run Undefined instruction exception Tag: 94321
  - 5
    - Wince Migration howto Hi, i'm newbie in WINCE. I am preparing to migrate from wince 4.2 to 5.0 on our pxa255 based hardware. Our wince 4.2 platform works well and is stable. Can you help me? Can you tell me where I can read the Microsoft migration notes and the various postings on here? I know that there are several threads about this topic but I'haven't finds them. Thank you very much for your attention. Franco Novi Tag: eboot run Undefined instruction exception Tag: 94320
  - 6
    - Did anybody worked on MX31 BSP? Hi, I have started working on MX31 BSP. I installed the MX31_BSP_WCE500_RTM_9.msi. When we install this installble we can get the required BSP stuff and also three sample work spaces in the PBworksapaces holder automatically. The three work spaces are 1.I300-30evbmobility 2.MX31mobility 3.MX31PMC They also given how to build these images. I builded the first two and the images are generated both in the release and debug modes. But the third one is not building with the following errors, BUILD: [01:0000000158:ERRORE] e:\WINCE500\PLATFORM\Mx31\Src\Inc\args.h(34) : fatal error C1083: Cannot open include file: 'pmcargs.h': No such file or directory BUILD: [01:0000000159:PROGC ] Compiling .\debug.c BUILD: [01:0000000162:ERRORE] e:\WINCE500\PLATFORM\Mx31\Src\Inc\args.h(34) : fatal error C1083: Cannot open include file: 'pmcargs.h': No such file or directory BUILD: [01:0000000163:PROGC ] Compiling .\imgcfg.c BUILD: [01:0000000166:ERRORE] e:\WINCE500\PLATFORM\Mx31\Src\Inc\args.h(34) : fatal error C1083: Cannot open include file: 'pmcargs.h': No such file or directory BUILD: [01:0000000167:PROGC ] Compiling .\waitutils.c BUILD: [01:0000000170:ERRORE] e:\WINCE500\PLATFORM\Mx31\Src\Inc\args.h(34) : fatal error C1083: Cannot open include file: 'pmcargs.h': No such file or directory BUILD: [01:0000000171:PROGC ] Linking E:\WINCE500\platform\MX31\lib\ARMV4I\retail\bspcmn.lib BUILD: [01:0000000173:ERRORE] LINK : fatal error LNK1181: cannot open input file 'obj\ARMV4I\retail\args.obj' I checked the entire system but i didn't found the pmcargs.h file. and this file is included in the args.h file. Please anybody inform me any solutions, ideas or experiences regarding this problem? Regards, Kumar. Tag: eboot run Undefined instruction exception Tag: 94316
  - 7
    - Did anybody worked on MX31 BSP? Hi, I have started working on MX31 BSP. I installed the MX31_BSP_WCE500_RTM_9.msi. When we install this installble we can get the required BSP stuff and also three sample work spaces in the PBworksapaces holder automatically. The three work spaces are 1.I300-30evbmobility 2.MX31mobility 3.MX31PMC They also given how to build these images. I builded the first two and the images are generated both in the release and debug modes. But the third one is not building with the following errors, BUILD: [01:0000000158:ERRORE] e:\WINCE500\PLATFORM\Mx31\Src\Inc\args.h(34) : fatal error C1083: Cannot open include file: 'pmcargs.h': No such file or directory BUILD: [01:0000000159:PROGC ] Compiling .\debug.c BUILD: [01:0000000162:ERRORE] e:\WINCE500\PLATFORM\Mx31\Src\Inc\args.h(34) : fatal error C1083: Cannot open include file: 'pmcargs.h': No such file or directory BUILD: [01:0000000163:PROGC ] Compiling .\imgcfg.c BUILD: [01:0000000166:ERRORE] e:\WINCE500\PLATFORM\Mx31\Src\Inc\args.h(34) : fatal error C1083: Cannot open include file: 'pmcargs.h': No such file or directory BUILD: [01:0000000167:PROGC ] Compiling .\waitutils.c BUILD: [01:0000000170:ERRORE] e:\WINCE500\PLATFORM\Mx31\Src\Inc\args.h(34) : fatal error C1083: Cannot open include file: 'pmcargs.h': No such file or directory BUILD: [01:0000000171:PROGC ] Linking E:\WINCE500\platform\MX31\lib\ARMV4I\retail\bspcmn.lib BUILD: [01:0000000173:ERRORE] LINK : fatal error LNK1181: cannot open input file 'obj\ARMV4I\retail\args.obj' I checked the entire system but i didn't found the pmcargs.h file. and this file is included in the args.h file. Please anybody inform me any solutions, ideas or experiences regarding this problem? Regards, Kumar. Tag: eboot run Undefined instruction exception Tag: 94315
  - 8
    - ISR load Hi, I have created an iisr that runs some code. A lot of people mentions that one should only run very little amount of code in an iisr but what are the consequences if there is to much code in there - and how much is to much? I'm asking because I''m facing a big problem with my driver. In my isr I'm filling a buffer and when it's full I call my IST that handles further action. Sometimes the system locks for about 2 - 10 ms (yes - milli seconds!) between the isr and the IST - some IST latency ehhh? Thanks Ole Tag: eboot run Undefined instruction exception Tag: 94314
  - 9
    - Monitor filesystem writes in CE 5.0 Hi Is it possible to see or get any statistics on writes performed by the filesystem. We are using a SQL mobil server on our CE 5.0 device and we would like to see how many writes the SQL is doing in average.. Is that possible somewhere ? Thomas Tag: eboot run Undefined instruction exception Tag: 94303
  - 10
    - Installable ISR without trigger an IST Hi everybody!! I'm developing a device driver and I want to do all the process in an installable ISR (it=B4s very light) and I don=B4t want to trigger the IST. Is it possible?? I read some threads about this topic and I understand that there're a problem with the InterruptDone which it's necessary to execute and it's impossible to execute in an ISR. Do I understand well? How can I do it? Thank you for your help. Tag: eboot run Undefined instruction exception Tag: 94297
  - 11
    - DHCP not renewing lease WinCE 5.0 ICOP BSP NDIS USB WIFI The device will register with the Linksys access point and aquire an IP but at the end of it's 2 day lease it show a message box saying "DHCP lease expired, failed to aquire new IP". This also happens with DLink access points. Any ideas how to prevent this. This will be a headless device that needs 100% connectivity? Tag: eboot run Undefined instruction exception Tag: 94296
  - 12
    - About downloadin image Dear all I need to download nk.bin via tftp without using cepb: can you tell me how to do it? Best regards Tag: eboot run Undefined instruction exception Tag: 94294
  - 13
    - USB Mass Storage Device ( Not able to open the drive) Hi, I was able to see the target as a USB device on the host PC. It was mounted as a "Mass Storage Device" on my host PC. i.e [ Drive I:\ ] But, whenever I try to open the drive I:\, it gives me the following errors (1) The Semaphore timeout period has expired (2) The request cannot be performed due to an I/O Device error. I have the doubt since the device should be mounted as DSK1: but it has mounted as I:? Tools, (1) WINCE 5.0 (2) ISP1582 Function Controller. Thanks Imtiaz Khan.K. Tag: eboot run Undefined instruction exception Tag: 94289
  - 14
    - S3c2440 is not booting. i tried printing data thro' serial port.I think problem in MMU.here with my boot.bib,config.bib and oemaddress table. I am new to this area kindly help. S3C2440 is not booting. My Boot.bib is like this STACK 8c02c000 00004000 RESERVED EBOOT 8C038000 00040000 RAMIMAGE ; Set aside 128 KB for loader; finalize later. RAM 8c026000 00006000 RAM ; Free RAM; finalize later. ARGS 8c020800 00000800 RESERVED FLSCACHE 8c200000 01400000 RESERVED DISPLAY 8c100000 00100000 RESERVED CONFIG COMPRESSION=OFF PROFILE=OFF KERNELFIXUPS=ON ;ROMOFFSET=35FC8000 SRE=ON ROMSTART=8c038000 ROMWIDTH=32 ROMSIZE=40000 ; These configuration options cause the .nb0 file to be created. ; An .nb0 file may be directly written to flash memory and then ; booted. Because the loader is linked to execute from RAM, ; the following configuration options ; must match the RAMIMAGE section. ROMSTART=8c038000 ROMWIDTH=32 ROMSIZE=40000 MODULES ; Name Path Memory Type ; ----------- --------------------------------------------- ----------- nk.exe $(_TARGETPLATROOT)\target\$(_TGTCPU)\$(WINCEDEBUG)\EBOOT.exe EBOOT My config.bib is MEMORY NK 80001000 01E00000 RAMIMAGE RAM 8C200000 01E00000 RAM FLASH 92000000 00100000 RESERVED ; Common RAM areas AUD_DMA 8c002000 00000800 RESERVED SDIO_DMA 8c010000 00010000 RESERVED ARGS 8C020800 00000800 RESERVED DBGSER_DMA 8c022000 00002000 RESERVED SER_DMA 8c024000 00002000 RESERVED IR_DMA 8c026000 00002000 RESERVED EDBG 8c030000 00020000 RESERVED DISPLAY 8c100000 00100000 RESERVED CONFIG COMPRESSION=ON KERNELFIXUPS=ON IF IMGPROFILER PROFILE=ON ELSE PROFILE=OFF ENDIF ; ; ROMFLAGS is a bitmask of options for the kernel ; ROMFLAGS 0x0001 Disallow Paging ; ROMFLAGS 0x0002 Not all KMode ; ROMFLAGS 0x0010 Trust Module only ; IF IMGTRUSTROMONLY IF IMGNOTALLKMODE ROMFLAGS=12 My OEM address table is g_oalAddressTable DCD 0x80000000, 0x32000000, 32 ; 32 MB DRAM BANK 7 :: 0x80000000 DCD 0x82000000, 0x08000000, 32 ; 32 MB SROM(SRAM/ROM) BANK 1 DCD 0x84000000, 0x10000000, 32 ; nGCS2: PCMCIA/PCCARD DCD 0x86000000, 0x18000000, 32 ; 32 MB SROM(SRAM/ROM) BANK 3 DCD 0x88000000, 0x20000000, 32 ; 32 MB SROM(SRAM/ROM) BANK 4 DCD 0x8A000000, 0x28000000, 32 ; 32 MB SROM(SRAM/ROM) BANK 5 DCD 0x8c000000, 0x38000000, 32 ; 32 MB DRAM BANK 6 :: 0x8C000000 DCD 0x90800000, 0x48000000, 1 ; Memory control register DCD 0x90900000, 0x49000000, 1 ; USB Host register DCD 0x90A00000, 0x4A000000, 1 ; Interrupt Control register DCD 0x90B00000, 0x4B000000, 1 ; DMA control register DCD 0x90C00000, 0x4C000000, 1 ; Clock & Power register DCD 0x90D00000, 0x4D000000, 1 ; LCD control register DCD 0x90E00000, 0x4E000000, 1 ; NAND flash control register DCD 0x90F00000, 0x4F000000, 1 ; Camera Interface DCD 0x91000000, 0x50000000, 1 ; UART control register DCD 0x91100000, 0x51000000, 1 ; PWM timer register DCD 0x91200000, 0x52000143, 1 ; USB device register(Changed) DCD 0x91300000, 0x53000000, 1 ; Watchdog Timer register DCD 0x91400000, 0x54000000, 1 ; IIC control register DCD 0x91500000, 0x55000000, 1 ; IIS control register DCD 0x91600000, 0x56000000, 1 ; I/O Port register DCD 0x91700000, 0x57000043, 1 ; RTC control register(Changed) DCD 0x91800000, 0x58000000, 1 ; A/D convert register DCD 0x91900000, 0x59000000, 1 ; SPI register DCD 0x91A00000, 0x5A000000, 1 ; SD Interface register DCD 0x92000000, 0x00000000, 32 ; 32 MB SROM(SRAM/ROM) BANK 0 DCD 0x00000000, 0x00000000, 0 ; end of table Tag: eboot run Undefined instruction exception Tag: 94282
  - 15
    - Change desktop with SystemParametersInfo Hi all, Anybody has any experience with changing the desktop in WinCE 5.00 device, usign the "SystemParametersInfo" API? I have written the follow code, but always return the error code 1439=ERROR_INVALID_SPI_VALUE: nError = SystemParametersInfo( SPI_SETDESKWALLPAPER, 0, "\\black.bmp", SPIF_SENDCHANGE ); if ( !nError) printf("SystemParametersInfo Failed. GetLastError: %d\n", GetLastError()); Seems that the SystemParametersInfo API is not supported. Anybody knows the way to change the desktop using a API in C? Thanks for your help. Bye, Tag: eboot run Undefined instruction exception Tag: 94280
  - 16
    - Citrix ICA Client for WinCE Thin Client Hello All, Using Platform Builder 5, I generated Thin Client image. I have included all components shown in wizard. I downloaded the ICA client for Win CE from http://www.citrix.com/site/SS/downloads/downloads.asp?dID=2755 link. I am able not able to install ICA client. I used thin client standard shell, Running icasetup.x86.cab file gives message "There is no application associated with icasetup.x86.cab. Run the application first and then run this file from within the application" Running cex86icasetup.exe gives error message "Can't find cex86icasetup.exe (or one of its componenets). Make sure the path and file name are correct and that all the required libraries are avaiable" When i tried this on mobile device WinCE verison i was able to do it. Thanks VIbhor Mahajan Tag: eboot run Undefined instruction exception Tag: 94278
  - 17
    - How to remove the print footer and header? Hi, I'm working with WinCE4.2. I want to print HTML through IE. I tried setting [HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\PageSetup] "footer"="" "header"="" but it looks like IE is ignoring this registry key. How to remove the print footer and header? Thanks. Tag: eboot run Undefined instruction exception Tag: 94273
  - 18
    - Samsung S3C2440 BSP for CE6 Hi, Where can I get WinCE6.0 BSP for Samsung S3C2440? Any answers are appreciated! Tag: eboot run Undefined instruction exception Tag: 94271
  - 19
    - ActiveSync performance hi, are there known performance issue with activesync over usb? i run a oem device that has activesync using usb function. if i copy files to the device memory card it is much slower compare to remove the memory card to external card reader. is this "normal"? what i'm asking, is if there is idea for me to start looking for performance problems? will activesync with optimized drivers ever have same performance as external card reader? maybe the overhead of activesync protocol, or bad implementation of active sync protocol is bottleneck? (even if i had optimized drivers) this is ce5 platform. would ce6 make difference? Tag: eboot run Undefined instruction exception Tag: 94268
  - 20
    - Problem while downloading the FLASH.BIN Well, there is a strange problem here while I downloading the "Flash.bin". Here is the Log : ======================================================= Sent BOOTME to 255.255.255.255 Sent BOOTME to 255.255.255.255 Sent BOOTME to 255.255.255.255 Sent BOOTME to 255.255.255.255 Sent BOOTME to 255.255.255.255 Locked Down Link 1 Src IP 192.168.100.66 Port 0400 Dest IP 192.168.100.55 Port 0B3B EthDown::TFTPD_OPEN::boot.bin -EbootSendBootmeAndWaitForTftp Download file information: ------------------------------------------------------------------------------- [0]: Address=0x9AAC0000 Length=0x1F40000 Name= ****** OEMVerifyMemory checking physical range [ 0x40C0000 ==> 0x5FFFFFF ]... ****** OEMVerifyMemory FAILED - Invalid Memory Area ****** !OEMVERIFYMEMORY: Invalid image ======================================================= Well, the question is the "physical range" seems like a "virtual address", 0x40C0000. And I read through the code(blcommon.c). I found that the address is *OEMReadData()* from *Host*. But, I don't know how to deal with the *.BIN file. So, thanks for your any comments. Thanks in advance. Tag: eboot run Undefined instruction exception Tag: 94265
  - 21
    - Wrong I2C_OFFSET in Mainstone III ? take a look at "bulverde_base_regs.h" #define I2C_OFFSET 0x00300000 accroding the PXA27x manual, It should be "0x0030168" ? So, can anybody confirm this ? Tag: eboot run Undefined instruction exception Tag: 94261
  - 22
    - USB CDC driver on Windows Embedded CE 6.0 Hi, I am just investigating USB CDC support on CE 6.0 RTM. I would like use USB (CDC) Modem like device connected to CE6 based host. The USB Serial source code is located \WINCE600\PUBLIC\COMMON\OAK\DRIVERS\USB\CLASS\USBSER, under CLASS tree, but seems this code is not an actual CLASS code. In [usbser.cpp] the only supported 2 USB Serial devices are: USB_DRIVER_SETTINGS SerDriverSettings = { sizeof(USB_DRIVER_SETTINGS), 0x045e,0x79,USB_NO_INFO,//Vendor Info USB_NO_INFO,USB_NO_INFO,USB_NO_INFO,//Device Info USB_NO_INFO,USB_NO_INFO,USB_NO_INFO // Interface Info. }; USB_DRIVER_SETTINGS SerialDriverSettings = { sizeof(USB_DRIVER_SETTINGS), 0x045e,0xce,USB_NO_INFO,//Vendor Info USB_NO_INFO,USB_NO_INFO,USB_NO_INFO,//Device Info USB_NO_INFO,USB_NO_INFO,USB_NO_INFO // Interface Info. }; This looks like the driver only support 2 of VENDOR ID 0x045e (Microsoft?) and Device 0x79 and 0xce, means NOT true class definitions. On the other hand, for the USB Printer Class and the USB Mass storage class the definitions are as follows: #define DRIVER_SETTINGS \ sizeof(USB_DRIVER_SETTINGS), \ USB_NO_INFO, \ USB_NO_INFO, \ USB_NO_INFO, \ USB_NO_INFO, \ USB_NO_INFO, \ USB_NO_INFO, \ USB_PRN_INTERFACE_CLASS, \ USB_PRN_INTERFACE_SUBCLASS, \ USB_NO_INFO #define USBMSC_DRIVER_SETTINGS \ sizeof(USB_DRIVER_SETTINGS), \ USB_NO_INFO, \ USB_NO_INFO, \ USB_NO_INFO, \ USB_NO_INFO, \ USB_NO_INFO, \ USB_NO_INFO, \ USBMSC_INTERFACE_CLASS, \ USB_NO_INFO, \ USB_NO_INFO These are the TRUE class definitions. So, do anybody know what are the really supported USB taregt serial devices? Thanks, ----------------------------------- Hiroyuki NAKAYAMA Tag: eboot run Undefined instruction exception Tag: 94259
  - 23
    - Move recycle bin Hi, Is there any way to assign the recycle bin to a diffrent location? I am using ROM only OS (persistent storage) with Ram storage space set to minimu and the recycle bin as a capacity of 128k. Ohad Tag: eboot run Undefined instruction exception Tag: 94247
  - 24
    - DMA transfer in progress on SDIO on WinCE 6 Hi! I am using the Mainstone III BSP on WinCE 6. When doing stress-tests with the SDIO-driver I get an assert in sdcontrol.c: Function HandleTransferDone: #ifdef DEBUG ASSERT( pController->fDMATransferInProgress == FALSE ); #endif It is a SD_READ operation of 12 blocks with blocksize 16. Have anyone else seen this problem? Best regards, Fredrik Jansson Tag: eboot run Undefined instruction exception Tag: 94228
  - 25
    - IR Beaming not working on Windows Mobile on development board (Intel PXA) Hi All, I m trying to enable IRDA on a Windows Mobile platform. 1)I wrote a small application to check and see that raw IR is working between two of my terminals 2)Enabled IRDA on WM build. If I right click on a file and beam it or try to receive data from (beaming from another working WM device : DELL AXIM) , I dont get any IRDA data nor my device is recognized by other device Observations are, 1) I m using development board for this. I could see my serial driver sending and receiving raw IR packets properly (comparable to log I took from a working WM device) 2) I could see IRSIR miniport driver also getting and sending data properly. I have put in the right registry settings for OBEX, IRDA, IRSIR and IRCOMM. I tried a winsock application but it fails (even on Dell Axim). Since IRDA stack source code is not available, I m not able to figure out whether the problem is in IRDA stack or OBEX or winsock. Any help on where else could be a problem or way to debug this? Thanks a lot Venky Tag: eboot run Undefined instruction exception Tag: 94226
- Next
  - 1
    - kitl I am new in WinCE too and I have same problem. Pls. reply me if you already have the decision. EggHeadCafe.com - .NET Developer Portal of Choice http://www.eggheadcafe.com Tag: eboot run Undefined instruction exception Tag: 94225
  - 2
    - FAT32 issue in High capacity cards...Can anyone help? Hi all, we use 4GB high capacity memory cards in wince5.0 environment.when we downloaded the run time image and inserted the high capacity card in our host,it could not be initialised because of FAT.The high capacty card supports FAT32 partition.The boot loader we are using does not support FAT32 it seems.Do we need to update the bootloader or to change the FATFSD.DLL? Pls help......... Thanks, Praba Tag: eboot run Undefined instruction exception Tag: 94221
  - 3
    - Download image to compact flash Hi everybody I am trying to download an image to a CEPC:x86, via serial port (the ethernet card is not compatible for downloading) using a boot loader generated with the CepcBoot.144. What I understood from the PB help is that the image is downloaded to the RAM and I would like to download it to a Compact Flash which is set as the Primary Master of my CEPC. Is this possible? Thanks for your help. Regards, Maite Tag: eboot run Undefined instruction exception Tag: 94213
  - 4
    - VLAN Hi All, Does anyone know how to configure VLAN under WinCE 5.0 ? I need to configure it once per adaptor. Regards, Stas. Tag: eboot run Undefined instruction exception Tag: 94205
  - 5
    - vlan... Hi, Searching through the Windows CE MSDN help i can't find information on VLANs support in WinCE 4.2/5.0 Can you please give some tips on VLAN in OS above? Thanks in advance. Tag: eboot run Undefined instruction exception Tag: 94204
  - 6
    - user service not recognized I have developed a service. This service is supposed to be loaded by service.exe. However, when I run services list; it is not listed. I have defined the services in both the project.reg and the project.bib file. The service build and creates a dll. The dll is added to the operating system image. Am I missing a additional definition in other files? Tag: eboot run Undefined instruction exception Tag: 94198
  - 7
    - Multiple Heaps created Hi All In my application when i used Heapwalker i was able to find about 32 heaps in addition to the one provided as the default heap. But i was unable to find any createheap calls in my code.but then how this many number of heaps get created. Tag: eboot run Undefined instruction exception Tag: 94197
  - 8
    - RAMFMD+TFAT+Full Format (Windows CE Emulator X86) problem ? Hi, I had try any method to solve my ARM S3C2440 base FMD driver problem, but it's problem for try Emulator X86 "RAMFMD+TFAT+Full Format" include "Build and Sysgen" problem + register modify(any method for me see at www) ....., but any method is useless, return to a basic/original source mode, my test step as below 1.uninstall CE5 2.reboot PC 3.install CE (ARM/X86)+no "share source code" 4.install all QFE ~WinCEPB50-061130-2006M11-X86/ARM as below INSTALL_QFE.JPG 5.open PB, new Platform project 00eX86, select Emulator X86 6.add Catalog : FAT File System/Transaction-safe FAT/Storage Manager Control Panel Applet as below PB_setup.JPG 7.add Environment SYSGEN_MSFLASH_RAMFMD=1 as below PB_Setting.JPG 8.use "Sysgen" only to compiler/link/make Release Mode ok, but have 4 WARNS, but I thing it's nothing for RAMFMD+TFAT part. BUILD: [Thrd:Sequence:Type ] Message BUILD: [00:0000000059:WARNS ] Directory: D:\WINCE500\private\osinternal\test\hal\ does not exist. BUILD: [00:0000000126:WARNS ] ethdrv is not a subdirectory of \WINCE500\PLATFORM\COMMON\SRC\X86\COMMON\. BUILD: [Thrd:Sequence:Type ] Message BUILD: [00:0000000008:WARNS ] Directory: D:\WINCE500\PRIVATE\OSINTERNAL\TEST\HAL\ does not exist. BUILD: [00:0000000020:WARNS ] Directory: D:\WINCE500\platform\common\src\inc D:\WINCE500\public\common\oak\inc\ does not exist. 9.run TFAT+Full Format is fail as below EMU_FullFormatErrorRelease.JPG 10.setting/setup Debug mode as below PB_Debug.JPG 11.compiler/link/make Debug mode ok, have 4 WARNS is same as Release mode 12.run TFAT+Full Format have break point at diskinterface.cpp \ CDiskInterface::WriteSectors as below EMU_FullFormatBreakPoint.JPG 13.run/going is fail as below EMU_FullFormatErrorDebug.JPG so, I sure have source code or windows ce system bug for TFAT+Full Format (Windows CE), no "Build and Ssysgen" problem. I use defaule register, and no modify it. Who can suggest something for me? for example use some QFE or register modify ... ps: all picture is here: http://groups-beta.google.com/group/cwtg/web/ramfmdfmd-tfat-full-form... hold keep on problem http://groups-beta.google.com/group/microsoft.public.windowsce.platbuilder/browse_thread/thread/b7f1a3c0efe34dc1/8921ffc36930c965?hl=zh-TW# cwt http://groups-beta.google.com/group/cwtg Tag: eboot run Undefined instruction exception Tag: 94189
  - 9
    - MTP (Media Transfer Protocol), windows ce and usb function stack hi, I have little experience of windows ce and would be insterested in implementing MTP (media transfer protocol) on an OEM platform that i work for. is MTP supported in windows ce 5.0 or windows ce 6.0? Can MTP be used in with the existing usb function stack? would MTP be a usb function driver (like the way i find that usb mass storage or rndis or serial is)? or if i would implement mtp, would it be outside the usb function stack? (usb function stack not enablewd) I have found no articles on MTP for windows ce, is this ever done by someone? Tag: eboot run Undefined instruction exception Tag: 94186
  - 10
    - My serial communication does not work! I'm developing a basic communication program in VS2005 for WinCE. I tried to transmit and receive data through COM1 but failed; even using the same code proved successfully in Windows Applications. Also, I notice the port is being used by the emulator, so other applications say the port is in use. In PB, at connectivity options, I chose Download=Emulator, Transport=Emulator and Debugger=KdStub. In emulator download settings, I chose Communications/Serial Port 1=COM1. The board used is the "Enterprise WebPad". I'm grateful for any help... Tag: eboot run Undefined instruction exception Tag: 94176
  - 11
    - WinCE6: alignment and uncached Heap allocation Hi, i am trying to create uncached heap; i haven't find any Heap's attribute for specifying this feature. I am thinking to do HeapCreate()/HeapAlloc() + VirtualProtect(PAGE_NOCACHE) on allocation. That will ensure the specified allocation will be uncached ? My second problem is about page alignment of heap allocations. It seems WinCE adds an overhead for each heap allocation; is it true ? There is a way to have an aligned allocation avoiding chunk allocation ? Thanks, Olivier Tag: eboot run Undefined instruction exception Tag: 94174
  - 12
    - ANN: Windows CE Live Chat Tomorrow! Just a note that we'll be hosting an online chat tomorrow morning concerning Windows CE 6.0! Members of the development team will be on hand ready to answer your questions, so bring 'em on! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Title: Windows CE Live Chat! December 20, 2006 9:00 - 10:00 A.M. Pacific time Additional Time Zones: http://www.timeanddate.com/worldclock/fixedtime.html?month=12&day=20&year=2006&hour=9&min=0&sec=0&p1=234 Description: Do you have tough technical questions regarding Windows CE 6.0 for which you're seeking answers? Do you want to tap into the deep knowledge of the talented Microsoft Embedded Devices Group members? If so, please join us for a live Windows CE chat and bring on the questions! Windows CE is the operating system that is powering the next generation of 32-bit, small-footprint and mobile devices. This chat will cover the tools and technologies used to develop devices using the Windows CE operating system. To join this chat, please log on via the main MSDN chat page at: http://msdn.microsoft.com/chats/ Chat Transcripts: Missed a recent chat? We welcome you to visit the Transcript Archive. Transcripts are usually posted within two weeks of the live event. http://msdn.microsoft.com/chats/transcripts/mobileembedded/default.aspx ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Sue sloh@microsoft.com (remove "online" from reply-to address) http://blogs.msdn.com/ce_base/ _____________________________________________________________ This posting is provided "AS IS" with no warranties, and confers no rights. _____________________________________________________________ Tag: eboot run Undefined instruction exception Tag: 94143
  - 13
    - Generation of password hash Hello, I have built an OS design with NTLM. I can set the credentials with NTLMSetIUserInfo. When I start the device the first time I set an initial user/password information. It is stored in registry and works even after reboot. But there is a problem, when I enable KITL. The normal NDIS miniport driver will not be able to initialize the occupied ethernet adapter. The VMINI driver comes in place and gives telnet access to the device. But the credentials formerly stored in the registry are invalid. I have to set user/password (using PlatformBuilder Shell) again. This is awkward, especially since I dont have this chance, when I deactivate KITL and want to use the standard NDIS miniport driver. How is the user info related to the active miniport driver, and how can I use the same NTLM user information in both situations? Regards, Helge -- Time is an ocean but it ends at the shore Tag: eboot run Undefined instruction exception Tag: 94141
  - 14
    - How can I customize a smallest version of Windows Mobile? Hmm, I want create a smallest version about Windows Mobile. 1) size must less than 32M, or even more less. 2) we are focus on developing drivers. So, some base componet required. BTW, we are developing a 32M flash + 32M SDRAM board which is based on Mainstone III BSP. Any comment on it ? Thanks in advance. Tag: eboot run Undefined instruction exception Tag: 94137
  - 15
    - Where can downlaod SQLCE3.0 's Install Cab for WinCE60 Where can downlaod SQLCE3.0 's Install Cab for WinCE60 Who can help me ??? -- ÍòÓÂ TDSÏîÄ¿×Ü¼à ÉîÛÚ°ÍÑÕ¿¦À³ö°æÔÚÏßÓÐÏÞ¹«Ë¾ ====================================================== ¹«Ë¾µØÖ·£ºÉîÛÚÊÐÂÞºþÇøºì¸ÚÂ· 1030 ºÅÐÂ»ªÊéµê 1 ¶° 4 Â¥ ÊÖ¡¡¡¡»ú£º13823564252 ¹«Ë¾×Ü»ú£º0755-82427201 ¹«Ë¾´«Õæ£º0755-82427010 ÓÊÕþ±àÂë£º518024 µç×ÓÓÊ¼þ£ºVan@bayakala.com ====================================================== ¹«Ë¾¡¡Íø¡¡Õ¾£ºhttp://www.bayakala.com ÐÅÏ¢·þÎñÆ½Ì¨£ºhttp://www.bimsasp.com ¡¡¡¡¡¡¡¡¡¡¡¡¡¡http://www.topsasp.com Tag: eboot run Undefined instruction exception Tag: 94135
  - 16
    - pxa25x exception on resume (Windows CE5) Hi there, I'm trying to debug an exception that I am receiving when my target comes out of suspend and is trying to resume normal Windows CE operation. I have included the debug output below. >From what I can figure out, the PC is in coredll.dll somewhere in the function xxx_setsystempowerstate(). However, I can't find this function. It's in the tpm.obj but I can't find the sources for that file. Is it not included in the CE installation (public/private code) or am I just overlooking it somehow? If anyone has any idea based on what is going wrong, let me know. I suspect it is somewhere in the area of wrong stack or link register settings but the restoration after suspend looks ok as far as I can see. One remarkable thing: the suspend/resume does work when called in the bootloader. Any help appreciated, thanks, Niels Brouwers ... ... Calling OEMPowerOff... Call OEMPowerOffAsm() Return redirectPO() Return OEMPowerOffAsm() RaiseException: Thread=83b24d70 Proc=809c0ca0 'device.exe' AKY=0000001d PC=03f992e8(coredll.dll+0x000292e8) RA=0000000a(???+0x0000000a) BVA =00000001 FSR=00000001 Unhandled exception c000000d: Exception 'RaiseException' Thread=83b24d70 AKY=0000001d PC=8010b6fc BVA=00000001 R0=0000000a R1=80106454 R2=83b24d70 R3=00000100 R4=809c2a44 R5=809c2a3c R6=809c2a60 R7=a3dff014 R8=ffffc808 R9=000000fb R10=00000064 R11=ffffc886 R12=ffffc77c SP=ffffc764 Lr=0000000a Psr=a00000df Halting system Tag: eboot run Undefined instruction exception Tag: 94133
  - 17
    - Where Can Download SQLCE3.0 for WinCE6.0?? Where cam download SQLCE3.0 for WinCE6.0?? Who can help me? Tag: eboot run Undefined instruction exception Tag: 94132
  - 18
    - Closing event handle Hi, In a filter driver for CE5.0 upwards, i have a manual reset event upon which more than 1 thread may be waiting. I use pulseEvent to signal the event, as soon as i call PulseEvent i want to CloseHandle on the event. I don't know how long it takes for all the threads to be signalled. What happens then if i call Closehandle on the event whilst some threads are blocked on it? Will the CloseHandle call work and the threads get unblocked? Tag: eboot run Undefined instruction exception Tag: 94129
  - 19
    - copy of files in TFAT fileystem Hi everybody, I am using TFAT with a NOR Flash Media driver (under WinCE 5.0). I see that when I copy a file to the storage area in Flash, the filesystem uses a buffer in RAM before copying the file to Flash. The shell displays a dialog showing the copying process (to RAM, not to Flash). After that I am assuming that the flashing process is done in background. The problem is that from the user's point of view, the dialog shows that the copy is "ready" and probably he/she could reset the device (thinking that it should not be a problem since the data was already copied), which could happen when the file is not still flashed. It is a way to control this? I mean, for example, to modify the dialog to wait the copy to Flash instead of in RAM. Or am I missing something? Thanks a lot for your replies. Best regards, Alex Tag: eboot run Undefined instruction exception Tag: 94126
  - 20
    - CETK Graphics Device Interface Test case 231 AlphaBlend failed I run the CETK command as below, tux -o -d gdiapi -x 231 it will always failed only at, AlphaBlend - AlphaBlendPerPixelAlphaToPrimaryTest FAIL: Driver verification mismatch detected. Comparison exceeded threshold, incorrect pixel at (0, 0) expected (0x00103452) found (0x00EFCFAD) The primary surface and the verification surface are almost all while, I found only one pixel at (0,0) failed to match. Is there any special setting at (0,0) of primary surface? Or is it a MS bug? If I run the CETK command as below, tux -o -d gdiapi -x 231 -c "/NoVerify" this case will pass. Thanks for any help. Tag: eboot run Undefined instruction exception Tag: 94122
  - 21
    - Copy file to root directory root:-File("file.txt", "\Windows\file.txt") Hi, i Want to copy a file in my image to the root directory. Will the above line work in the dat file? If its not correct can someone say what is.I don't think it is working for me. Tag: eboot run Undefined instruction exception Tag: 94121
  - 22
    - Using i.MX21 with a monochrome display Hello, I'm using i.MX21 on the ADS eval board from freescale. I try to drive a monochrome display. The BSP is delivered to support a sharp display and I've modified initialisation code for LCD in OAL but as soon as I configure the monochrome mode (clear TFT and COLOR bits of LPCR register) the FLM and LP signal are stopped ? any clue, any experience in this domain ... If you have already a configuration that works for a monochrome display it could help. Any advises are welcome thanks in advance Nyrbyk Tag: eboot run Undefined instruction exception Tag: 94120
  - 23
    - sub:FAT32 issue in 4GB cards Hi all, We are trying to make our host to support high capacity memory cards.We face problems while reading the FAT contents of the High Capacity cards. 1)As the FAT version of High Capacity cards should be FAT32,our cards shows FAT12 when tried to read the FAT instead of FAT32.Why so?(We use panasonic 4GB SDHC cards)Following is the trace we got after inserting the card: 1st 512 bytes of FAT Read: ========================== -------------------------------------------------------------------------------- 0x83e13c00: SDOutputBuffer: 0x006368A0 , Size: 512 bytes 0x83e13c00: 0x00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000080 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x000000A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x000000B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x000000C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x000000D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x000000E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x000000F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000100 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000110 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000120 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000130 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000140 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000150 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000160 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000170 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000190 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x000001A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x000001B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 ................ 0x83e13c00: 0x000001C0 03 01 0B 7F FF BF 00 20 00 00 00 00 76 00 00 00 ....... ....v... 0x83e13c00: 0x000001D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x000001E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x000001F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 AA ..............U. 0x83e13c00: -------------------------------------------------------------------------------- 2nd 512 bytes of FAT read: ========================= -------------------------------------------------------------------------------- 0x83e13c00: SDOutputBuffer: 0x006368A0 , Size: 512 bytes 0x83e13c00: 0x00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000080 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x000000A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x000000B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x000000C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x000000D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x000000E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x000000F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000100 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000110 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000120 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000130 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000140 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000150 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000160 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000170 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x00000190 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x000001A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x000001B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 ................ 0x83e13c00: 0x000001C0 03 01 0B 7F FF BF 00 20 00 00 00 00 76 00 00 00 ....... ....v... 0x83e13c00: 0x000001D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x000001E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0x83e13c00: 0x000001F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 AA ..............U. 0x83e13c00: ---------------------------------------------------------------------------------------- 0x83fc8800: NumSec=256 BytesPerSec=512 FreeSec=0 BiggestCreatable=0 0x83fc8800: Partition NumSectors=-7936 0x83fc8800: MSPART!PD_OpenPartition: dwStoreId=000915D0, PartName= 0x83fc8800: >>> Loading module fatfsd.dll at address 0x03E90000-0x03EB1000 (RW data at 0x01FF0000-0x01FF063C) 0x83fc8800: FSD_MountDisk: mounting volumes for hDsk=000924F0 0x83fc8800: SDMemory: GetDeviceInfo - Profile = SDMemory, length = 18 0x83fc8800: FATFS!MountDisk: error reading MBR (87) 0x83fc8800: FATFS!OpenVolume: access time updates disabled 0x83fc8800: FATFS!OpenVolume: event logging enabled 0x83fc8800: FATFS!OpenVolume: automatic scanning disabled 0x83fc8800: FATFS!OpenVolume: write verify disabled 0x83fc8800: FATFS!OpenVolume: extra FAT on format disabled 0x83fc8800: FATFS!OpenVolume: force write through enabled 0x83fc8800: FATFS!OpenVolume: Codepage = 1 0x83fc8800: FATFS!OpenVolume: Number of path cache entries = 50 0x83fc8800: FATFS!InitVolume: sector 0 byte 0 suspicious (0x0) 0x83fc8800: FATFS!InitVolume: invalid BPB, volume deemed invalid 0x83fc8800: FATFS!InitVolume: FAT VERSION: 12 0x83fc8800: FATFS!InitVolume: Cluster Size (Sectors): 0 0x83fc8800: FATFS!UnmountDisk: unmounting all volumes on disk 000924F0 0x83fc8800: FATFS!FATDetach complete (0 sectors written in 0 requests) 0x83fc8800: <<< Unloading module fatfsd.dll at address 0x03E90000-0x03EB1000 (RW data at 0x01FF0000-0x01FF063C) 2)When we format the Normal SDcard(1GB) using a card reader with FAT32 option,it shows the FAT VERSION:32 while readng the FAT.But the low capacity cards should have FAT12/FAT16 type of partitions.Why it shows like FAT VERSION:32? 3)We use Platform builder 5.0 to download the run time image to x86 based CEPC.Does the boot loader support FAT32? 4)To support our 4GB card,do we need to update the boot loader if it does not support FAT32? Thanks in advance. Regards, Praba Tag: eboot run Undefined instruction exception Tag: 94115
  - 24
    - (CE6) How to add items in catalog Hi, I have created a static library and a dll under f:\wince600\public\generico. They can be built successfully. But how can I add them into catalog? The MSDN "Platform Builder User's Guide" does not give me enough information. Any reply is appreciated! Tag: eboot run Undefined instruction exception Tag: 94110
  - 25
    - USB Hub Hi, We have USB Hub TUSB2046 Chip connected to PXA270 and we have taken out 4 ports for accessing. I have included the OHCI and USB HID driver for mouse to the image and downloaded the image. But we are not able to access the Hub using mouse. Mouse is getting power but it is not accessible. With the same Image, we have connected the mouse directly to one of the USB port of PXA(bypassing Hub) and we are able to access mouse and a Hub of 1.1 compatibility. Kindly suggest me if any settings to be done in the Image for the Hub Chip or any drivers to be loaded specially for the Hub Chip. And also pls suggest me any Hardware related issues. Thanks in advance. Tag: eboot run Undefined instruction exception Tag: 94109

hello,everybody!
I have a problem,I migrate the eboot from wince4.2 to wince5.0,I
copy the whole eboot directory to the 5.0,and I modify the source,lib and
so on. the pb5.0 could generate the eboot.bin,eboot.nb0
but when I download the eboot.nb0 through DNW(sunsang provided)
and then run,the output information was the only one message"Undefined
instruction exception"
what's the reason?can anybody help me,thank you!

--
desire to change

Message posted via PocketPCJunkies.com
http://www.pocketpcjunkies.com/Uwe/Forums.aspx/wince-pb/200612/1

Top

Re: eboot run Undefined instruction exception by Geoff

Geoff
Fri Dec 22 12:21:59 CST 2006

Do you have a StrongARM CPU? (or a CPU without thumb?) 5.0 will not
support it.

You could have memory map issues and other problems too.

Geoff
--

desirechange via PocketPCJunkies.com wrote:
> hello,everybody!
> I have a problem,I migrate the eboot from wince4.2 to wince5.0,I
> copy the whole eboot directory to the 5.0,and I modify the source,lib and
> so on. the pb5.0 could generate the eboot.bin,eboot.nb0
> but when I download the eboot.nb0 through DNW(sunsang provided)
> and then run,the output information was the only one message"Undefined
> instruction exception"
> what's the reason?can anybody help me,thank you!
>

Top

Re: eboot run Undefined instruction exception by desirechange

desirechange
Sun Dec 24 18:36:28 CST 2006

not a strongarm cpu,I use the s3c2410(arm9),Geoff.....I need some help

Geoff wrote:
>Do you have a StrongARM CPU? (or a CPU without thumb?) 5.0 will not
>support it.
>
>You could have memory map issues and other problems too.
>
>Geoff
>--
>
>> hello,everybody!
>> I have a problem,I migrate the eboot from wince4.2 to wince5.0,I
>[quoted text clipped - 4 lines]
>> instruction exception"
>> what's the reason?can anybody help me,thank you!

--
desire to change

Message posted via PocketPCJunkies.com
http://www.pocketpcjunkies.com/Uwe/Forums.aspx/wince-pb/200612/1

Top