pci driver

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - boot.bib & config.bib In boot.bib i'm using virtual memory in the definitions. Is it right? I changed to physical memory definitions and it's working fine. Why? In config.bib i modified the definitions so that it falls after my boot.bib definitions i-e nk.bin after eboot.nb0 Status is: My download process shows a serial message "Start SDRAM Image Donwload" and hangs. My boot.bib file: MEMORY EBOOT 800C0000 00080000 RAMIMAGE ; Set aside 128 KB for loader; finalize later. STACK 80048000 00068000 RESERVED ; Rajesh added Stack. RAM 800B0000 0000FFFF RAM ; Free RAM; finalize later. DRV_GLB 801A0000 00001000 RESERVED ; Driver globals; 4 KB is sufficient. EDBG 801A1000 00020000 RESERVED ; EthDbg buffers ;g_dwRamImageStart 00000000 800B8000 FIXUPVAR CONFIG COMPRESSION=ON PROFILE=OFF KERNELFIXUPS=ON SRE=ON ROMSTART=800C0000 ROMWIDTH=32 ROMSIZE=00080000 MODULES ; Name Path Memory Type ; -------------- ---------------------------------------------- ----------- nk.exe $(_TARGETPLATROOT)\target\$(_TGTCPU)\$(WINCEDEBUG)\Eboot.exe EBOOT My config.bib file: ; Name|Virtual/Cached |Size| Region Type MEMORY IF IMGFLASH ! IF SABINAL NK 801C2000 01000000 RAMIMAGE ; SDRAM 16MB: [800B 8000 -> 810B 7FFF] RAM 811C2000 00C00000 RAM ; SDRAM 12MB: [810B 8000 -> 81CB 7FFF] EDBG 81DC2000 00020000 RESERVED ; x20000 for EBOOT - 3 Client memory pools of 24K (128K) ;end address is 0x829C2000 ENDIF IF SABINAL ! NK 801C2000 01000000 RAMIMAGE ; SDRAM 16MB: [800B 8000 -> 810B 7FFF] RAM 811C2000 00C00000 RAM ; SDRAM 12MB: [810B 8000 -> 81CB 7FFF] EDBG 81DC2000 00020000 RESERVED ; x20000 for EBOOT - 3 Client memory pools of 24K (128K) ;end address is 0x829C2000 ENDIF ENDIF IF IMGFLASH IF SABINAL IF BUILD_ROM_BIN NK 98380000 00F80000 RAMIMAGE ; FLASH 16MB - 0x80000: Locate above EBOT image and configuration block ENDIF IF BUILD_ROM_NB0 NK 98300000 00F80000 RAMIMAGE ; FLASH 16MB - Replace EBOOT Image ENDIF RAM 810B8000 00C00000 RAM ; SDRAM 12MB: [810B 8000 -> 81CB 7FFF] ENDIF IF SABINAL ! IF BUILD_ROM_BIN NK 98380000 01F80000 RAMIMAGE ; FLASH 32MB - 0x80000: Locate above EBOT image and configuration block ENDIF IF BUILD_ROM_NB0 NK 98300000 01E00000 RAMIMAGE ; FLASH 32MB - Replace EBOOT Image ENDIF RAM 811C2000 00C00000 RAM ; SDRAM 12MB: [810B 8000 -> 81CB 7FFF] ENDIF ENDIF IF SABINAL AUD_DMA 81CB8000 0000A000 RESERVED SLEEP_SAV 81CC2000 00001000 RESERVED DRV_GLB 81CC3000 00001000 RESERVED CACHE_FLG 81CC4000 0003C000 RESERVED ; for use by cache routines: 81CC_4000->81CC_4003 used for flagging. 81CC_4004->81CC_4803 rsvd for miniD DISPLAY 81D00000 00130000 RESERVED ; 1MB aligned UNUSED_BUF 81E30000 0015D000 RESERVED ENDIF IF SABINAL ! AUD_DMA 83CB8000 0000A000 RESERVED SLEEP_SAV 83CC2000 00001000 RESERVED DRV_GLB 83CC3000 00001000 RESERVED CACHE_FLG 83CC4000 0003C000 RESERVED ; for use by cache routines: 83CC_4000->83CC_4003 used for flagging. 83CC_4004->83CC_4803 rsvd for miniD DISPLAY 83D00000 00130000 RESERVED ; 1MB aligned BLOCK_BUF 83E30000 00080000 RESERVED UNUSED_BUF 83EB0000 000DD000 RESERVED ENDIF whql_sig 00000001 00002000 EXTENSION ; WHQL signature extension (6KB). ZBANK 86000000 00100000 RESERVED CONFIG COMPRESSION=ON COMPRESSION=OFF IF IMGPROFILER PROFILE=ON ENDIF IF IMGPROFILER ! PROFILE=OFF ENDIF KERNELFIXUPS=ON ROMFLAGS=0 IF IMGTRUSTROMONLY IF IMGNOTALLKMODE ROMFLAGS=12 ENDIF IF IMGNOTALLKMODE ! ROMFLAGS=10 ENDIF ENDIF IF IMGTRUSTROMONLY ! IF IMGNOTALLKMODE ROMFLAGS=2 ENDIF IF IMGNOTALLKMODE ! ROMFLAGS=0 ENDIF ENDIF IF IMGFLASH ! AUTOSIZE=ON ENDIF IF IMGFLASH ! ROMSTART=800B8000 ROMWIDTH=32 ENDIF IF LOCALE=0411 ;JAPAN FSRAMPERCENT=0x60606060 ENDIF IF IMGFLASH ROMSTART=98300000 ROMWIDTH=32 ENDIF IF SABINAL ROMSIZE=01000000 ENDIF IF SABINAL ! ROMSIZE=01E00000 ENDIF Can anyone suggest me ? Thanks, Peter Tag: pci driver Tag: 58726
  - 2
    - USB HID Mouse Driver problem Hello. I'm trying to use "USB HID Mouse Only" OS feature in my embedded platform (PXA270 / WinCE 5.0). Everything works nice except one thing: USB HID mouse driver uses incorrect screen width: mouse pointer crosses the screen twice while moving horizontal. However there are no problems with vertical mouse movement!? Actually, the problem appears when mouse HID calls "mouse_event" API. It calls "mouse_event" with relative movement coordinates, and there are no problems with this. My screen resolution is 640x480, it seems that "mouse_event" uses 800x480 or something > 640 for horizontal screen resolution. Any ideas? Thanks, Oleg Tag: pci driver Tag: 58725
  - 3
    - Link error to Mike Hall's driver sample. I am trying the driver example after I read Mike Hall's aticle <<SPOT the Geek and Windows CE Drivers>> in MSDN: http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnembedded/html/embedded03042003.asp The Driver project is compiled smoothly. Then I create a project for the application--MyApp. It was created from a "Hello world" Project wizard. I replaced the .cpp file with the file MyApp.cpp which Mike have given. Next, I created a menu for this program. But when I build it, it failed. the build output is: --------------------------------------------------------------- MyApp.obj : error LNK2019: unresolved external symbol CommandBar_InsertMenubar referenced in function "long __cdecl WndProc(struct HWND__ *,unsigned int,unsigned int,long)" (?WndProc@@YAJPAUHWND__@@IIJ@Z) MyApp.obj : error LNK2019: unresolved external symbol CommandBar_Create referenced in function "long __cdecl WndProc(struct HWND__ *,unsigned int,unsigned int,long)" (?WndProc@@YAJPAUHWND__@@IIJ@Z) XIZANGRel/MyApp.exe : fatal error LNK1120: 2 unresolved externals Error PB2505: Error executing link.exe. --------------------------------------------------------------- By lookup MSDN, I found that the prototype of these two functions CommandBar_InsertMenubar() and CommandBar_Create() are defined in <commctrl.h>, but this header file have already been included. So why cannot this project be built successully? Should I add some features into my OS-image project? Thank you! Tag: pci driver Tag: 58724
  - 4
    - Spot the geeks doubt hi, i have to load the driver mydriver.dll whenever the application needs..what should do if 1) i used loaddriver() ,driver is loading,but createfile("DEM1:",...) and open,close functions are failing..what should i do ? can you explain in detail since i am a beginner.. Thanking you Tag: pci driver Tag: 58723
  - 5
    - Error in Install PB Hello, I have an error at the PB install. I will deinstall all, but an error occure. How can deinstalll the product manually (automatic cannot run)? Thank You. Richard. Tag: pci driver Tag: 58721
  - 6
    - CE 5.0 WiFi question Hi all, I build a Thin Client device on the PB5.0. But I can not configure the Wiless, because there is no UI about the Wireless Setting. Thin Thin Client device does not contain the explorer shell. How to solve the problem. Thanks, Bryan Tag: pci driver Tag: 58720
  - 7
    - IDE FLASH DISK PROBLEM i have attached 32 mb transcend 40-pin ide flash module to my ide channel and now i am trying to boot my pc with a floppy disk. but to my surprise nothing appears on the screen. the screen is totally black. but if i remove the flash module and plug-in a hard disk and then again try booting my pc boots perfectly. i have checked the bios standard setup features and it correctly detects flash module and displays all information like cylinder..etc. i require the solution urgently please help me thank you in advance... regards, vinay Tag: pci driver Tag: 58719
  - 8
    - WaveAPI & Device removal Hello All, I'm developing a waveform audio driver for PocketPc / WinCE for a removable audio device (compactflash) and have some trouble with WaveAPI when my driver is unloaded by the system. When I add my hardware to the system: everything goes as expected. The PnP identifier is determined, devicemanager loads my driver, and i receive calls from WaveAPI: WAV_Open WAV_IOControl - WIDM_GETNUMDEVS WAV_IOControl - WIDM_GETDEVCAPS WAV_IOControl - WODM_GETNUMDEVS WAV_IOControl - WODM_GETDEVCAPS WAV_IOControl - WODM_GETEXTDEVCAPS WAV_IOControl - WODM_OPEN By now there are two WAV devices in the system (WAV1: default internal device WAV2: newly added compactflash device). From an application i can use both succesfully. The trouble starts when I remove the device from the system. After the CE_CARD_REMOVAL event, the devicemanager calls WAV_DeInit and my DLL is detached, without WaveAPI ever calling WAV_Close. This is the point where it goes wrong. The remaining audio device in the system (WAV1:) stops working. WaveAPI does not seem to respond anymore. The stupid thing is when I remove the WAV1: from the system(just for testing), with a call to DeactivateDevice() in an application, the same thing happens. This test exclude my driver as being part of the problem. Does anybody know what can cause this strange behaviour? Thanks in anticipation, Best Regards, Antoin Janssen Tag: pci driver Tag: 58717
  - 9
    - PCMCIA I82365 Memory Leak problem??? Hi, I have some problems with the I82365 component under Windows CE 5.0. My design is based on a embedded X86 Board with VIA Chipset and the RICOH PCMCIA controller. So the bootloader set the ricoh controller in the I82365 compatible state and I included the following components in a standard X86 image: PCI Bus, I82365 PCMICA PC Card Host, NE2000 compatible (PCMCIA Card) When I build the image everything goes ok and I can start the image on the PC. So Windows CE detects the PCMCIA Card and the card get a IP throw DHCP. The problem is, that when I take a look under SYSTEM / MEMORY that the Use of PROGRAM MEMORY increases every few seconds around 4-8 KByte. Windows doesenÂ´t give the memory back free. So when I do nothing on the PC the memory will be full after 4-5 hours. Then I get a message that I have to increase the program memory manually. I get this feature ONLY, when I include the PCMCIA support. All used components are standard Windows CE 5.0 components, no Third Party components. Has anyone an idea, of resolving this problem??? ThankÂ´s in advance for answering my question. Grettings, Alex Tag: pci driver Tag: 58716
  - 10
    - Skin does not show up in the emulator? Hello, I´m using Platformbuilder 4.2 and I haved sucessfully compiled the OS, when I initialize it in Platformbuilder the skin appear fine then I apply the skinfolder in the SDK settings and build the SDK. I load the sdk in embedded visual c, and the skin does not appear. What can I do??? This is really strange to me, I cannot understand why, I´m going crazy, as for every rebuild of the OS it takes like 1 hour..... If I go to the Emulator Configurations Settings ( in Embedded visual c) the skin is specified there, so what the heck???? Can there be any magical configuration in the platform builder that I have to use? Please help, Dani Tag: pci driver Tag: 58712
  - 11
    - WLAN driver dev Hi, I ought to write a driver for a wlan pcmcia card for wince 4.2 but I got no experiences in this area so I have some stupid questions;-( Do I need the Platform Builder or is eVC++ enough? How long should such a project last? Do you know a good source of information about this topic? I hope you can help me... TIA, Axel Tag: pci driver Tag: 58711
  - 12
    - sboot on pxa255 problem I am trying to port sboot from CEPC to pxa255 BSP. i see a dialog between my sboot an PB(4.2) but it stopes. i performed monitoing on my serial port ( we have only one in our platform so i disabled all debugs messages!) i see the PB is "playng" with RTS. why? if i do not have the RTSin my platform is it how it will affect my program? i configured PB for no parity 8 bit 1 stop and no flow, so why pb still uses RTS: IOCTL_SERIAL_CLR_RTS IOCTL_SERIAL_SET_RTS my boot request is: 6B 49 54 4C BB 00 24 00 31 64 46 57 34 30 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 the response to my boot request by PB is: 6B 49 54 4C AA 20 08 00 1B 41 45 44 42 47 FF 00 00 0A shouldn't it be DD instead of AA? i also see that the dialog is not ordered means pb is not waiting to sboot to finish before it sends data, is it because of the RTS? is it OK? after that i see nothing and the download hangs. the main question is why pb uses RTS and CTS if a config it to no hardwae flow control? i will appreciate any help on that 10x Rona Tag: pci driver Tag: 58710
  - 13
    - Is that possible to log the function calling history? When my OS hangs, the callstack window out put this text: (call stack unavailable while child is running) So I know nothing about the context before the program thread went wrong. My question, is it possible to log the function-calling sequence? Since it is OK to show current callstack, I think maybe it is feasible to log the calling sequence, so I can see what happened before the error occured. Thanks a lot! Tag: pci driver Tag: 58706
  - 14
    - Is that possible to set breakpoint for changing-register? Is that possible to set breakpoint for changing-register? When I debug the loading process of my OS image, I found that when it hanged, the editor window shows that the address is 00000000, where the asm code is ??? (unknown or inaccessible ). So I suspect that something was wrong to change the PC (Program Count register) value to zero! So I want to see WHO does it. Is it possible to set a breakpoint to monitor the PC value, if it change to zero, then break. (The data breakpoint seem for expression in c-level). Or is there any useful method to solve this problem? Thanks a lot! Tag: pci driver Tag: 58704
  - 15
    - What is "mckendric" in source directory "d:\mckendric\..." when I listed sources of a loaded modules (DLLs), some directories looked like these: ---------------------------------------------------------------------------------------------------------- d:\mckendric\private\winceos\coreos\nk\kernel\pgpool.c d:\mckendric\public\common\sdk\inc\kfuncs.h ---------------------------------------------------------------------------------------------------------- what's the meaning of MCKENDRIC? I think it should be d:\WINCE420\private\... or %_WINCEROOT%\private\... and I found the real direcotry name [d:\wince420] appears as well: d:\wince420\platform\xizang\kernel\hal\arm\oemidle.c Why this happen? Is there anything subtle? Thank you. a complete source file list of nk.exe: =================================================================== Source files for 'D:\MYWORK\LINDA\RELDIR\XIZANGDEBUG\NK.EXE' 14:01:08 10/24/2004 China Standard Time d:\mckendric\private\winceos\coreos\nk\kernel\pgpool.c d:\mckendric\private\winceos\coreos\nk\kernel\kdriver.c d:\mckendric\private\winceos\coreos\nk\kernel\profiler.c d:\mckendric\private\winceos\coreos\nk\kernel\exdsptch.c d:\mckendric\private\winceos\coreos\nk\kernel\stubs.c d:\mckendric\private\winceos\coreos\core\dll\cscode.c d:\mckendric\private\winceos\coreos\nk\kernel\intrapi.c d:\mckendric\private\winceos\coreos\nk\kernel\kmisc.c d:\mckendric\private\winceos\coreos\nk\inc\celognk.h d:\mckendric\private\winceos\coreos\nk\kernel\kwin32.c d:\mckendric\public\common\sdk\inc\kfuncs.h d:\mckendric\private\winceos\coreos\nk\kernel\schedule.c d:\mckendric\private\winceos\coreos\nk\inc\celognk.h d:\mckendric\public\common\sdk\inc\kfuncs.h d:\mckendric\private\winceos\coreos\nk\kernel\physmem.c d:\mckendric\private\winceos\coreos\nk\kernel\virtmem.c d:\mckendric\private\winceos\coreos\nk\inc\celognk.h d:\mckendric\private\winceos\coreos\nk\kernel\loader.c d:\mckendric\private\winceos\coreos\nk\inc\celognk.h d:\mckendric\private\winceos\coreos\nk\kernel\printf.c d:\mckendric\private\winceos\coreos\nk\kernel\compr2.c d:\mckendric\private\winceos\coreos\nk\kernel\ppfs.c d:\mckendric\private\winceos\coreos\nk\kernel\heap.c d:\mckendric\private\winceos\coreos\nk\kernel\objdisp.c d:\mckendric\private\winceos\coreos\nk\kernel\resource.c d:\mckendric\private\winceos\coreos\nk\kernel\arm\strings.c d:\mckendric\private\winceos\coreos\nk\kernel\arm\thmunwnd.c d:\mckendric\private\winceos\coreos\nk\kernel\arm\unwind.c d:\mckendric\private\winceos\coreos\nk\kernel\arm\mdarm.c d:\mckendric\private\winceos\coreos\nk\mapfile\mapfile.c d:\mckendric\private\winceos\coreos\nk\lzxcompress\bclib\decompr.c d:\mckendric\private\winceos\coreos\nk\lzxcompress\bclib\bincompp.h d:\mckendric\private\winceos\coreos\nk\lzxcompress\lzx\decoder\decverb.c d:\mckendric\private\winceos\coreos\nk\lzxcompress\lzx\decoder\decalign.c d:\mckendric\private\winceos\coreos\nk\lzxcompress\lzx\decoder\maketbl.c d:\mckendric\private\winceos\coreos\nk\lzxcompress\lzx\decoder\dectree.c d:\mckendric\private\winceos\coreos\nk\lzxcompress\lzx\decoder\decxlat.c d:\mckendric\private\winceos\coreos\nk\lzxcompress\lzx\decoder\decin.c d:\mckendric\private\winceos\coreos\nk\lzxcompress\lzx\decoder\decuncmp.c d:\mckendric\private\winceos\coreos\nk\lzxcompress\lzx\decoder\decblk.c d:\mckendric\private\winceos\coreos\nk\lzxcompress\lzx\decoder\decout.c d:\mckendric\private\winceos\coreos\nk\lzxcompress\lzx\decoder\decinit.c d:\mckendric\private\winceos\coreos\nk\lzxcompress\lzx\decoder\decapi.c d:\mckendric\private\winceos\coreos\nk\lzxcompress\lzx\decoder\ldi.c d:\mckendric\private\winceos\coreos\nk\compress\kdecompress.c d:\mckendric\private\winceos\coreos\nk\compress\compress.c d:\mckendric\private\winceos\coreos\nk\kitl\ethdbg.c d:\mckendric\private\winceos\coreos\nk\kitl\edbgprot.c d:\mckendric\private\winceos\coreos\nk\kitl\timer.c d:\mckendric\private\winceos\coreos\nk\kitl\debug.c d:\mckendric\public\common\oak\drivers\ethdbg\kitleth\dhcp.c d:\mckendric\public\common\oak\drivers\ethdbg\kitleth\kitleth.c d:\mckendric\public\common\oak\drivers\ethdbg\eboot\edbg.c d:\mckendric\public\common\oak\drivers\ethdbg\eboot\dhcp.c d:\mckendric\public\common\oak\drivers\ethdbg\eboot\udp.c d:\mckendric\public\common\oak\drivers\ethdbg\eboot\tftp.c d:\mckendric\public\common\oak\drivers\ethdbg\eboot\tftpd.c d:\mckendric\public\common\oak\drivers\ethdbg\eboot\ebsimp.c d:\wince420\platform\xizang\drivers\ethdbg\ne2k\ne2000.c d:\wince420\platform\xizang\drivers\ethdbg\smcb\smc.c d:\wince420\platform\xizang\kernel\hal\arm\timerxsc1.c d:\wince420\platform\xizang\kernel\hal\arm\intxsc1.c d:\mywork\linda\wince420\xizang\cesysgen\sdk\inc\kfuncs.h d:\wince420\platform\xizang\kernel\hal\arm\oemidle.c d:\wince420\platform\xizang\kernel\hal\arm\edeviceinit.c d:\wince420\platform\xizang\kernel\hal\debug.c d:\wince420\platform\xizang\kernel\hal\cfwxsc1.c d:\wince420\platform\xizang\kernel\hal\mdppfs.c d:\wince420\platform\xizang\kernel\hal\oemioctl.c d:\wince420\platform\xizang\kernel\hal\halether.c d:\wince420\platform\xizang\kernel\hal\halkitl.c d:\mckendric\public\common\oak\csp\arm\xscale\cfw.c d:\mckendric\private\winceos\coreos\core\corelibc\crtw32\misc\rotr.c d:\mckendric\private\winceos\coreos\core\corelibc\crtw32\misc\rotl.c d:\mckendric\private\winceos\coreos\core\corelibc\crtw32\helper\arm\__div0.c d:\mckendric\private\winceos\coreos\core\corelibc\crtw32\convert\xtoa.c d:\mckendric\private\winceos\coreos\core\corelibc\crtw32\convert\atox.c End Source files for 'D:\MYWORK\LINDA\RELDIR\XIZANGDEBUG\NK.EXE' 14:01:08 10/24/2004 China Standard Time =================================================================== Tag: pci driver Tag: 58702
  - 16
    - Adding an Active X control to an OS Image Hi, I am very new to the Windows CE 5.0 Platform Builder having just downloaded the 120 day trial today. I am trying to create an OS image of CE 5 that is bascially just the web browser but I need to add 1 active X control to the OS. The ActiveX control is one that I wrote in Delphi 6. Can this be added to Windows CE? Or do I have to rewrite the control in another language? I have Delphi.NET but have not really looked at it.. Thanks Rich Tag: pci driver Tag: 58700
  - 17
    - Virtual Memory Page size Dear experts, Is there a way to find out the Virtual Memory page size on an ARM and x86 platform? I will need this to do some memory optimisation. Regards, G Tag: pci driver Tag: 58695
  - 18
    - item Deactived on "CE Debug Zones" Dialog As metioned in the last post, My os image was hanged on loaded symbol of xsc1bd_serial.dll. By "Target>CE modules and symbols", I can see that the "Status" of "xsc1bd_serial.dll" is Loaded. But I cannot see any debugmsg. so I checked the DEBUG ZONE set from "Target>CE Debug Zones", but I see nothing list in the listbox, the only text "Getting Data" is deactived. What's the problem? thank you! Tag: pci driver Tag: 58691
  - 19
    - Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK hi, i am facing a problem with my 32 MB IDE FLASH DISK. When i attach FLASH DISK to my IDE Channel and start the PC to boot from the floppy nothing happenns. but if i remove FLASH DISK and replace it by my HARD DISK and try the same procedure my OS boots and the NK.BIN is successfully copied. please help me. thank you in advance regards, vinay s trivedi Tag: pci driver Tag: 58690
  - 20
    - MmMapIoSpace() v.s. VirtualAlloc() + VirtualCopy() What's the difference between MmMapIoSpace() and VirtualAlloc() + VirtualCopy(), since both of them seemed to convert a physical io address to a virtual address. Thank you! Tag: pci driver Tag: 58689
  - 21
    - CE.NET training courseware I here the official MS CE.NET courseware may finally be updated to CE.NET 5.0. Any truth to this? Any ideas as to when? Tag: pci driver Tag: 58687
  - 22
    - Falcon MIPS vr4121 platform.... I am trying to bring a Falcon (MIPS 4121) BSP from 4.1 to 5.0. Since the falcon is not officially supported anymore and I am normally not doing any kernel work, I was wondering if somebody has done that before or can help me a little with some fundamentals:-): I read through the CE5 docu and it says "All MIPS platforms have been migrated into one". (no more NKMIPSIIb.lib for example). Well - does that mean the I can use the mips NK.lib for my BSP? Next there are tons of cool nice little libraries under "\platform\common\lib\mipsii\" But which ones to use for the 4121? For example: One of the migration steps I have to do is to create the OEMCacheRancheFlush function. THe docu says I can simply use one form the common\libs directory ....but which one to use? There are oal_cache.lib oal_cache_mips.lib oal_cache_mips32.lib oal_cache_vr4131.lib (not exactly the same as my CPU but very close ... I hope:-( ) This library confusion continues with "oal_intr...lib" and other libs... I do have a 4.1 kernel but it does not expose all functions/methods/apis that CE needs... Does anybody have a good hint how I should start and what I should use? Chris Muench (Embedded MVP - but normally above the kernel:-)) Tag: pci driver Tag: 58686
  - 23
    - **REPOST** ATA problem with multi PCI-IDE cards. I have tried only with two PCI-IDE s with one disk connected to each of them (as masters)...which doesn't work......any problems with this configuration? -- cheers, Joseph Garibaldi. B'lore, India. ################################################################ "Ten" <nospam@nospam.net> wrote in message news:ugeZuretEHA.2876@TK2MSFTNGP14.phx.gbl... > Are you using multiple drives on each PCI IDE card or only masters on each > card? > ################################################################ talking about ATA driver, has anybody tried the driver with multi-PCI IDE s ?? (WinCE 4.2) I am facing a peculiar problem here with the upper byte of every word read from the data register being 0 (which obviously is a problem for both Identify Data and PIO modes)..This happens only when I work with multi (have tried it only with two) PCI-IDE s and this corruption happens only with the pci IDE card which has a greater PCI Device number. The pci IDE card with lesser PCI Device Number works just fine. With one PCI - IDE device, it works fine. -- cheers, Joseph Garibaldi. B'lore, India. Tag: pci driver Tag: 58678
  - 24
    - Failed to add project in PB4.2 Hi, I tried to add an existing project to my workspace in PB 4.2, through project->Insert->Existing project, but did not get any result. Does anyone know the reseaon? Thanks JWU Tag: pci driver Tag: 58677
  - 25
    - "?ASP Support" in PB 4.2 Platform Feature view and ASP no longer w I have had Web Server + ASP support in and working for awhile in my platform but now I can't open an ASP page (Error 501/505). The CE device will serve html files but refuses to open the simplest ASP file. Also my Platform Feature View shows question marks as follows: !Web Server (HTTPD) ?Active Server Pages (ASP) Support ?Device Management ISAPI Extension ?Web Server Administration ISAPI any seen this? what do the question marks mean? Platform builds with no warnings or errors and runs otherwise... Tag: pci driver Tag: 58674
- Next
  - 1
    - USB Client Driver Development I'm doing development on the PPC 2003 environment. I'm trying to develop a client USB driver for PPC 2003 to communicate with our host device. The development environment that we use is MS EVC++ 4.0, the specific device this is being attempted with is the HP IPAQ 6315. Does anyone here have any experience with doing USB development with the PPC 2003? Some of the issues of come up against is it appears from the Win CE 4.2 SDK that it only supports host functionality while the Hp device itself and most PDA's only have client controllers. The device enumerates fine, I was wondering how I could go about getting access to endpoints to send and receive data? -- Jeremy T. Software Engineer Tag: pci driver Tag: 58673
  - 2
    - CE 5.0 pcibus registry question Hi all, [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCI] "Dll"="PCIbus.dll" "Order"=dword:20 "Flags"=dword:8 "BusIoctl"=dword:2a0048 What doest the Flags=dword:8 mean ? In CE 4.X the Flags is equal to "1". I use "1" in CE 4.x and my USB HID works fine, but I have to use "8" to make it work in CE 5.0. I can not find the document about the Flags. Please tell me what doest the flags mean? Thanks, Bryan Tag: pci driver Tag: 58670
  - 3
    - WinCE QFE releases for the weeks of October 11 - October 22, 2004 The following updates for Windows CE have been recently released and are available for download. More information for each update is provided in the Readme document available after the individual update(s) has been installed. Windows CE .NET 4.2 Update name: Windows CE .NET 4.2 Platform Builder QFE 041001_KB883650 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=BE2FC0C5-1688-499E-91C3-260501748B64&displaylang=en Component: DirectShow Description: The audio driver does not allow ring tones to be played through Windows Media Player DirectShow engine and may cause the device to cease responding. Update name: Windows CE .NET 4.2 Platform Builder QFE 041008_KB885418 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=1BDD6BE4-1B5A-4A11-8B36-212606EA90B3&displaylang=en Component: PPP Description: PPP Server reads incorrect data from the registry at startup and may get improperly configured. Update name: Windows CE .NET 4.2 Platform Builder QFE 041015_KB887538 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=1A9E1A71-262D-4928-8110-2BD13FE09F5B&displaylang=en Component: WMP Control Description: A buffer overrun may occur when trying to open a URL of greater than 248 characters. Update name: Windows CE .NET 4.2 Platform Builder QFE 041015_KB886682 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=BDE84C75-764D-4690-95B1-D68385EFA801&displaylang=en Component: HTTPD Description: A Windows CE .NET 4.2 device configured as a Web Server may timeout and fail large file uploads. Update name: Windows CE .NET 4.2 Platform Builder QFE 041015_KB867779 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=4EED36EE-9F6D-4DF8-B1E4-AA348463CC98&displaylang=en Component: EAP Description: Windows CE .NET 4.2 devices using PEAP over 802.11 may leak memory with every reauthentication request. Download Link - directs you to the Microsoft Download Center page associated with each update. Each update is contained in a self-extracting compressed file. Component - displays the module(s) updated in each QFE Description - provides more information on the issue(s) fixed **DO NOT REPLY - THIS E-MAIL IS BEING SENT TO YOU FROM AN UNMONITORED ACCOUNT. Due to Microsoft's security requirements, the hyperlink(s) contained in this e-mail may not automatically open your browser. If you experience any difficulty, please copy the link and paste into your browser. ** Tag: pci driver Tag: 58666
  - 4
    - Version Control for Platform Builder Hello Experts, What are some of the effective ways to do version control with Platform Builder? Right now I have the code under: PLATFORM\<myplatform> PLATFORM\COMMON\SRC\ARM\INTEL\<mycommon> Then, there comes the project, and the .cec file. What do you think would make sense and be easy to maintain? Is there way we can change the setting so that we can get the files from the same common root directory? Thanks, Nguyen Tag: pci driver Tag: 58663
  - 5
    - WinCE hang on load symbol for serial Any advice will be high appreciated! I have struggle with it for several days. Another working weekend will come :( First, I assume that there maybe something wrong with the PDD part, eh? Because my BSP was cloned from "lubbock" for PB4.0, and I updated it to PB4.2, maybe there was something changed. But I am confused by the drvier source, XSC1_SER16550, XSC1_SerialPdd, COM_MDD, COM_MDD2. Is there anyone so kind to give me a clue to understand them? I know the layered drive is divided into MDD and PDD, but why here are 4 modules? btw, how to find the definition of SSDI between MDD and PDD for a special driver like this serial comm-port? I am full of gratitude to you for any help. ************************************************************************************************************************************ ************************************************************************************************************************************ My OS image startup process is stalled on loading symbols for _SERIAL.DL the latest messages from debug output window are: ======================================================================================================== 4294773656 PID:23c4948e TID:23c76eb6 0x83c49000: DEVICE!ActivateDeviceEx(Drivers\BuiltIn\Serial) entered 4294773670 PID:23c4948e TID:23c76eb6 0x83c49000: >>> Loading module xsc1bd_serial.dll at address 0x02EC0000-0x02EE4000 (RW data at 0x01F46000-0x01F46608) Loaded symbols for 'D:\MYWORK\LINDA\RELDIR\SITSANGDEBUG\XSC1BD_SERIAL.DLL' ========================================================================================================= The serial driver was cloned from lubbock. the PDD source should be D:\WINCE420\PLATFORM\Sitsang\drivers\SERIAL\XSC1_SER16550\ and ...\SERIAL\XSC1_SerialPdd\ MDD source should be D:\WINCE420\PUBLIC\COMMON\OAK\DRIVERS\SERIAL\COM_MDD and ..\SERIAL\COM_MDD2 Am I right? I am not sure why there are two MDD's ? In the DllEntry of MDD file ((SerialDllEntry() of MDD; DllEntry() of MDD2)) there is a statement: --------------------------------------------- { if ( dwReason == DLL_PROCESS_ATTACH ) { DEBUGREGISTER(hinstDll); DEBUGMSG (ZONE_INIT, (TEXT("serial port process attach\r\n"))); --------------------------------------------- But why I can not see the debug messagae "serial port process attach"; What should winCE do before call into DllEntry? Thanks a lot!! Tag: pci driver Tag: 58655
  - 6
    - Priority of connection used to access Internet I have an issue that hope to get help from someone here and I will appreaciate that. I am using Windows CE 4.2, I just wondering that if both connection GPRS and WiFi are available at the same time. - Windows CE will use which one to access Internet? - Could we configure the priority of connection? if yes, how?? I am really hope some one may helping me to verify the issue above. Thank you very much! Best regards, Lamberto Tag: pci driver Tag: 58654
  - 7
    - Book about Platform Builder Hi Guys, since Windows CE 3.0 there are a lot of changes in Windows CE (5.0), but all i can find about PB is the good ol' reference 'Building Powerful Platforms with Windows CE'. In the time of 3.0 it gave me a lot of informations about how PB internaly works and how to write drivers and applications. Also under CE 4.x it was a great source although there are several changes (e.g. creating BSPs). Now with CE 5.0 further changes came into platform builder including a lot of changes about directory structures and how all the files are organized. Due to the fact that i already got 'some' experience from the 'older' OSes i'm able to came through the new version and find everything needed. But you can't memorize everything all the time and writing everything onto several papers (or my own documentation about PB) isn't also the best way. So when will there be a new book about Platform Builder??? (Maybe 'Developing Windows CE.net Devices' will be published some lovely day) Regards, Oliver Münchow -- --------------------------------------- Gesytec GmbH eMail: 52076 Aachen omuenchowATgesytecDOTde http://www.gesytec.de Tag: pci driver Tag: 58653
  - 8
    - NDIS: Adapter PCI\XXX1 - NOT using OPTIMIZED RX handler What does this debug message mean? NDIS: Adapter PCI\XXX1 - NOT using OPTIMIZED RX handler This message appears in the debug window, i think it comes from the pb 5.o, who know this message? Tag: pci driver Tag: 58644
  - 9
    - how to set BSP_NO variables in .cec file? Dear gurus, I'm using CEPB 5.0. In cec files, I set BSP_NO variable as following: Variable( "BSP_NOUSB", ) so when I add the USB driver into my platform, I got BSP_NOUSB= but when I remove the USB driver from the platform, how can I get BSP_NOUSB=1? I know I can set BSP_NOUSB=1 in command line, .bib file, or other places. But what I really wanted is the variable is set automatically when I remove the driver. Can you help me? Tag: pci driver Tag: 58643
  - 10
    - Windows CE .NET 4.1 Autodial with LAN connectivity Hi to all the CE gurus I'm trying to set up a CE platform that can do auto dial-up while having a local LAN connection when the IP address cannot be resolved. According to CE's documentation, the autodial does not try to make a connection when there is any form of connectivity. Unfortunately this is my situation. I have a local private LAN (10.0.0.xxx) using fixed IP addresses for local devices, but I also need to dial up when some third party software wants to connect to an ISP somewhere else. Is there anyway to set up CE 4.1 to force a connection on the modem port? All helps are appreciated. Cheers Weili Tag: pci driver Tag: 58638
  - 11
    - error in oemioctl.c for standard x86 platform (PB 4.2) I am using the standard x86 based BSP and i am getting this error on oemioctl.c I cannot trace anything relating to this, anyone has any ideas what this could be related to. Hardware platform I am using is EPIA x86 based. Thanks in advance for your replies. c:\wince420\platform\viacepc\kernel\hal\.\oemioctl.c(1200) : error C2196: case value '16859236' already used c:\wince420\platform\viacepc\kernel\hal\link() : error LNK1181: cannot open input file 'obj\x86\retail\oemioctl.obj' NMAKE : U1073: don't know how to make 'C:\WINCE420\platform\VIACEPC\lib\x86\retail\hal.lib' NMAKE : U1073: don't know how to make 'C:\WINCE420\platform\VIACEPC\lib\x86\retail\hal.lib' NMAKE : U1073: don't know how to make 'C:\WINCE420\platform\VIACEPC\lib\x86\retail\hal.lib' Tag: pci driver Tag: 58630
  - 12
    - How do I route standard output to serial port Hello experts, I have a headless device. How do I route stdout messages to serial port (Debug port)? Thanks, Nguyen Tag: pci driver Tag: 58618
  - 13
    - Link warning in my Device Driver Using PB 4.2 Why Am I getting this error when my device driver (.dll) is linking? MyDriver.dll warning LNK4060: entrypoint '__DllMainCrtStartup' is not __stdcall with 12 bytes of arguments; image may not run LINK : WARNING lnk4096: /base VALUE '0X100000' is invalid for Windows 95 and Windows 98; image may not run. I'm doing a CE device driver. How do I get rid of the above warning message. Do I need a __DllMainCrtStartup entrypoint? The above only happens in release. In debug, I don't get these warning errors. Thanks. John Tag: pci driver Tag: 58605
  - 14
    - Warning: Unable to do imports from my.exe to Kernel32.dll - will late bind Lets try this post again Using PB 4.2 to compile myapp.exe I'm trying to add some of my applications to the image and I keep getting this warning message, "Warning: Unable to do imports from myapp.exe to KERNEL32.dll - will late bind. The feature that will add my applications will be given to our customers so they can added our applications and driver to their image. I would really like to get rid of this warning so I wouldn't have to explain it to our customers when they build their image. John Tag: pci driver Tag: 58601
  - 15
    - What's "Native" in "native wireless LAN"? I'm considering the benefits of migrating from 4.1 to 4.2. We have some ethereal desire for supporting wireless LAN. I noticed that 4.1 supports some wireless LAN capability but 4.2 boasts "native" wireless LAN. Can anyone explain what native wireless is? I know very little about wireless networking. Tag: pci driver Tag: 58597
  - 16
    - "Add Driver" catalog/BSP dependency issue I'm using the PXA27x developer's kit (WinCE 5.0) and have cloned the MainstoneII platform. Using the BSP wizard I've added a NDIS driver for the LAN91C111 Ethernet controller. In the catalog, the driver seems to end up in the right place, i.e. in the cloned BSP under "Device Drivers\Networking\Local Area Networking (LAN) devices\LAN91C111". Inspecting the generated cec-file entries for my added driver, these look (as expected) very similar to the corresponding entries for the global LAN drivers (defined in netcard.cec). I can't e.g. find any added dependencies for my added driver. However, when I add my added driver to my OS design, the driver ends up with a red cross in the driver list, indicating that it will not be included in my build. When inspecting why my driver is excluded I'm told to add any of the following features; - USB Flash Config Tool - RNDIS client - Wireless LAN (802.11) STA - Automatic Configuration and 802.1x - USB Remote NDIS class driver If I include one of the global LAN drivers instead, e.g. RealTek RTL8139, I get no dependency errors (i.e. no red cross). Since the cec-dependencies look the same, why am I getting these dependencies for my own added BSP driver when I don't get them for a global driver ? Where can I find (and change) these dependencies when adding my driver to the BSP ? Regards, Leif O -- Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/ Tag: pci driver Tag: 58595
  - 17
    - CE image for Freescale i.MX1 doesn't run user apps We produced a CE.NET 4.2 image for the Freescale MC9328MX1ADS/B board platform, using the "Mobile Handheld" profile of Platform Builder. The image ran on the board and we could also run built-in CE applications like file viewers, etc. Then we loaded our own "Hello World" app compiled with eVC++, but it didn't run. Neither did it crash! There was no response at all when we clicked the icon of this application. And the debugger also didn't function. But when we use a pre-compiled CE image provided by Freescale, the same application runs. What is wrong with our CE image??? Tag: pci driver Tag: 58590
  - 18
    - Direct 3D at half speed Hi, I have 2 platforms (CE 4.2) that run on the same hardware with the same Direct 3D video driver. Both are release kernels. On one platform I get about 20 fps on the other one I barely get 10 fps with the exact same 3D app. Anybody has a clue where this could be coming from ? Thanx! Mike Tag: pci driver Tag: 58589
  - 19
    - Desktop PC mainboard for Windows CE .NET 4.2 Hi all, I was asked if desktop PC mainboards are eligible to use with Windows CE .NET 4.2 . I made a quick research at www.microsoft.embeddedoem.com about the supported processors and drivers and BSPs. So far as I understand if a board has one of the supported processors and there are drivers for certain chipsets on it (such as audio, video, LAN/WAN, serial, parallel, USB ports, etc.) , I can use that board with Windows CE .NET 4.2. However I will probably not get a bsp support since the configurations may vary or the oem manufacturer may not support embedded operating systems on driver basis. I will accept opinions about this subject. Any experiences or recommendations are also welcome. Thanks in advance, -- Selin Metin selinm_at_esit_dot_com_dot_tr Tag: pci driver Tag: 58588
  - 20
    - Kernel Tracker / CeLog issues Hi All, I have an issue which I've been looking for a solution for a couple of days (CE .NET 4.2). The problem is that Remote Kernel Tracker displays the following when I connect to our device (Kitl stream): "Remote Kernel Tracker detected invalid timestamps on some data while reading from the file or connection stream. Remote Kernel Tracker has corrected the timestamps to the best of its ability. Would you like to continue data collection?" It manages to get a few samples but these all seem to occur at the same time-instance. I've installed a patch from Microsoft which should fix a similar problem (Timestamp error in Remote Kernel Tracker KB826381), but it made no difference. There also seems to be a problem with the CeLog (I've tried to compile it and managed to get something out of it (.lib's) but it's seemed to make no difference either). I've tried to build the OS with different settings (such as "Flush Events To Release Directory", "Enable Profiling" etc.) but I get no output file called celog.clg in my release directory and I cannot connect using Remote Kernel Tracker. "CeLogFlush.exe" is present on the device and in the Registry/Init but I cannot se it in the active processes after I start. Could there be a problem in CeLog which results in no log/Remote Kernel Tracker not working? Anyone got any ideas on what it could be? What are the CeLog dependencies which could give these errors (Timers or...)? What can I do to test if CeLog is working properly? Best Regards, Henrik Tag: pci driver Tag: 58586
  - 21
    - Fail to load symbols for ..._SERIAL.DL My OS image startup process is stalled on loading symbols for _SERIAL.DL the latest messages from debug output window are: ======================================================================================================== 4294773656 PID:23c4948e TID:23c76eb6 0x83c49000: DEVICE!ActivateDeviceEx(Drivers\BuiltIn\Serial) entered 4294773670 PID:23c4948e TID:23c76eb6 0x83c49000: >>> Loading module xsc1bd_serial.dll at address 0x02EC0000-0x02EE4000 (RW data at 0x01F46000-0x01F46608) Loaded symbols for 'D:\MYWORK\LINDA\RELDIR\SITSANGDEBUG\XSC1BD_SERIAL.DLL' ========================================================================================================= The serial driver was cloned from lubbock. the PDD source should be D:\WINCE420\PLATFORM\Sitsang\drivers\SERIAL\XSC1_SER16550\ and ...\SERIAL\XSC1_SerialPdd\ MDD source should be D:\WINCE420\PUBLIC\COMMON\OAK\DRIVERS\SERIAL\COM_MDD and ..\SERIAL\COM_MDD2 Am I right? I am not sure why there are two MDD's ? In the DllEntry of MDD file ((SerialDllEntry() of MDD; DllEntry() of MDD2)) there is a statement: --------------------------------------------- { if ( dwReason == DLL_PROCESS_ATTACH ) { DEBUGREGISTER(hinstDll); DEBUGMSG (ZONE_INIT, (TEXT("serial port process attach\r\n"))); --------------------------------------------- But why I can not see the debug messagae "serial port process attach"; What should winCE do before call into DllEntry? Thanks a lot!! Tag: pci driver Tag: 58575
  - 22
    - Retail/Debug Hi, my bootloader works fine in retail build, but it is not working in debug build. let me make it clear. if it is a debug build, then the debug output is Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built Mar 13 2003 22:52:25 Windows CE Serial Bootloader Version 1.1 System ready! Preparing for download... Sending boot request... Waiting for boot ack... received non-download packet type Sending boot request... Waiting for boot ack... Received boot ack Received boot request ack... starting download received non-download packet type received non-download packet type immediately I get a message like download failed. review your download selection and configuration. but the same, under retail build works perfectly fine. any comments? regards Sujith Tag: pci driver Tag: 58574
  - 23
    - Building Device Drivers in Platform Builder Hello everybody, Using Platform Builder 5.0, can one develope only device drivers and test it on hardware device without building os design. I just want to build usb device driver and not the os/bsp part. Is it possible to write, debug/test drivers part only. Also what are hardware supported by Platform Builder for testing purpose. Is it possible to write driver dll or an application through "Platform Builder 5.0" that should work on Windows CE 4.2? Thanks in advance Sunny Tag: pci driver Tag: 58573
  - 24
    - How to enable 13M mode on PXA27x Dear experts, Have you enabled CPU 13M mode on PXA27x? I tryied it by referring to Intel's spec. It seems that the CPU can enter and exit 13M mode. But after several times, the system halts. Could you give me some info or share me the sample code? Thanks! Tag: pci driver Tag: 58571
  - 25
    - [Q]: Steve & Mike Hi Steve & Mike, With reference to your article [Understanding the File System Architecture in Windows CE .NET]: http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnembedded/html/embedded01012002.asp You said in the above article that you may cover TFAT in the future[!] article. I am not able to find any article on TFAT under columns\GetEmbedded. regards sajid Tag: pci driver Tag: 58565

hi,
is there pci enumeration driver in wince 4.2,if yes,how can we get device
information from that??
1) if pci enumerator is there,how can i get the base address of a pci data
acquisition card,how?
2)if pci enumerator is absent,what should i do in order to get base
address ?
i have to write a driver for data acquisition card,can u tell me the
procedure..

thanking you

Top