PB5 & default language English (UK)

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - AC97 Win CE 5.0, PXA270 There is a bug in the PXA270 AC97 driver. If 'expireTime' get set to 0xFFFFFFFF the last while will hang forever in the last while loop // // XllpOstDelayTicks // // Delay the number of ticks specified using the OST OSCR0 clock. // // Inputs: // pOstRegs - handle to structure containing the OST a base register // addresses. // ticks - the unsigned 32-bit value containing the number of // ticks to delay // static void XllpOstDelayTicks (P_XLLP_OST_T pOstRegs, XLLP_UINT32_T ticks) { XLLP_UINT32_T expireTime, time; time = pOstRegs->oscr0; expireTime = time + ticks; // // Check if we wrapped on the expireTime // and delay first part until wrap // if (expireTime < time) { while (time < pOstRegs->oscr0); } while (pOstRegs->oscr0 <= expireTime); return; } Tag: PB5 & default language English (UK) Tag: 110912
  - 2
    - ~strings.pbcxml Hi All If I make a new BSP(No clone BSP) that didn't be supported in PB6.0, how can I make two "BSPNAMEstrings.pbcxml" file in "C: \WINCE600\PLATFORM\NEWBSP\CATALOG\1033,\1041"? Do I edit the strings.pbcxml by myself ? Currently, I have converted CEC file into pbcxml file and WindowsCE 6.0 booting is OK in my H/W without "~strings.pbcxml". Best Regards JJang Tag: PB5 & default language English (UK) Tag: 110910
  - 3
    - AYGShell Hi All What is the AYGShell API Set and what would I typically use it for? Best Regards -- Phil Tag: PB5 & default language English (UK) Tag: 110897
  - 4
    - Composite driver Hi all, I am trying to integrate composite driver with my BSP. My function controller driver is working fine if i am not using composite driver. When I use it, I am unable to see the folder on my Desktop PC. I guess it is not working correctly. I have certain doubt that 1. In composite driver case, how to find out that the OS will support it or not. 2. I am using using ClientList as USBSer_Class and Mass_Storage_Class and driver installed in this case is wceusbsh.sys, wceusbsh.inf and usbstor.sys, usbstor.inf. I want to know, should I add Interface number here. 3. Should composite driver use Interface Association Descriptor. 4. I can see the icon of mass storage in "safety remove hardware" application but can not see the folder. Please guide me thoroughly. Thanks you very much in advance. Best regards, Mukesh Modi Tag: PB5 & default language English (UK) Tag: 110894
  - 5
    - Updating BIOS in Windows CE!! Hi, I'm working on a X86 board which has Windows CE 4.2 OS. The board has the SST49LF080A chip ( 8 MB ) for storing the BIOS with size of 1 MB. The BIOS chip is connected to south bridge via LPC bus. I need to write a application which should take the new BIOS from USB or Compact flash and should write it in the SST ROM chip. How to do this? Any driver is available with Windows CE 4.2 ( FMD drivers?? ). Kindly help me regarding this. Regards, Kumar Tag: PB5 & default language English (UK) Tag: 110893
  - 6
    - How to test SD Client driver....... hi all! I got SD Client driver which acts as network adapter for my wireless device. If i need to test my driver, does CETK got wifi specific test cases so that i can check my driver stability. if i need to test my sd client driver what are the test cases i need to run. U'r help is really appreciated. Thanks, Ragz..... Tag: PB5 & default language English (UK) Tag: 110892
  - 7
    - Diskpart utility help !!! Hi all, Could anyone guide me to build bsect.img for exfat wince 6.0. As i am getting linker error while linking bsec.com. Also when i tried with FAT16 file system i am getting "unable to load bldr !"(when tried to make bootable using diskpart). Could anyone tell how to compile bsect.img file? Thanks... Tag: PB5 & default language English (UK) Tag: 110889
  - 8
    - Hive Based Registry Stop's Image to Run. Hi to Everybody I am using winCE 5.0. and i face two problems in creating and running the image. 1:- i create an extended partition of 25MB but when i copy data from SD card more than 14.4 MB the image is curropted. 2:- I include the Hive-based registry in the image, Unfortunately now the image load kernel and other setting but it hangs aftre this messege... Windows CE Firmware Init INFO: Initializing system interrupts... INFO: Initializing system clock(s)... INFO: Initializing driver globals area... SDMMC config set rGPGCON: 46ab9a OEMInit Done... Sp=ffffc7cc OEMSetRealTime: Year: 3, Month: 1, Day: 1, Hour: 12, Minute: 0, second: 0 rcnr=1h ------------------------------------------------------------------------------ ------- My Registry settings are as under..... ; @CESYSGEN IF FILESYS_FSREGHIVE ; HIVE BOOT SECTION [HKEY_LOCAL_MACHINE\init\BootVars] "SYSTEMHIVE"="system.hv" "PROFILEDIR"="Documents and Settings" "Start DevMgr"=dword:1 "RegistryFlags"=dword:1 ; END HIVE BOOT SECTION ; @CESYSGEN ENDIF FILESYS_FSREGHIVE ; Resources available at time of device.exe initialization. ; Key names are descriptive; resource ids are definitive. ; System ids are defined in ddk\inc\resmgr.h. ; HIVE BOOT SECTION [HKEY_LOCAL_MACHINE\Drivers\Resources\IRQ] "Identifier"=dword:1 "Minimum"=dword:1 "Space"=dword:20 "Ranges"="1-0x20" ; "Shared"="" [HKEY_LOCAL_MACHINE\Drivers\Resources\IO] "Identifier"=dword:2 "Minimum"=dword:0 "Space"=dword:10000 "Ranges"="0-0xFFFF" ; END HIVE BOOT SECTION ------------------------------------------------------------------- Any help will be appericiated.. Tag: PB5 & default language English (UK) Tag: 110878
  - 9
    - EHCI Driver in Ce 6.0 Hi All, I would like to know about the reusability of EHCI host driver code avialable with CE 6.0. The CE 6.0 code descriptions of EHCI driver says that it is compatible to EHCI 1.0 standard. My device has a SH4 processor and it has USB EHCI controller builtinto it(EHCI 1.0). I am trying to use the CE standard code for this host controller. From my initial study I feel that the code is completly reusable . The change I have to make is the registry specific entries to specify the address of my Host controller instead of the current PCI based registry entries. Am I right? i.e. Is this Ce 6.0 EHCI host controller code reuable for any USB host controller that meets the EHCI 1.0 Spec? Expecting your valuable reply. regards Bijesh V.M. Tag: PB5 & default language English (UK) Tag: 110873
  - 10
    - Waveform audio and microphone Hi I use a PXA270 device with a BSP cloned from Mainstone III. I have just inserted the AC97 Audio driver and Waveform Audio support. I Have also added the Mediaplayer sample component. When my Kenerl image starts i can hear sound and WAV. Now i would like to test my microphone, but i don't find any microphone configuration utility or any recording software. How can i test the micropohone? Which kind of components should i put inside my Runtime Image in order to get microphone working? Best Regards Rudy Barbieri rudy.barbieriCHIOCCIOLAdestura.it Tag: PB5 & default language English (UK) Tag: 110872
  - 11
    - Help !!! GSM/GPRS support in Windows ce 5.0 Hi All, We intend to develop an automotive device which uses GSM/GPRS connection to communicate to a server to transfer data periodically on WinCE 5.0.There is no voice call support. Anybody has experience on the same as i am new in this field Can i use TAPI/Unimodem driver and the serial interface for such an application? Do i need to develop a new driver for the modem or the Unimodem.dll is enough? Is it possibile to control the radio like network selection, roaming etc at the application level using TAPI interface and AT commands? Is there any better way of doing it in CE 5.0? Thanks in advance Ajith Tag: PB5 & default language English (UK) Tag: 110863
  - 12
    - Virtual and physical addresses Hello, Can there be a virtual address which is also some physical address? Eg. In my OEMaddrtable, DCD 0x80000000, 0xA0000000, 128 ; 128MB SDRAM DCD 0x9A800000, 0x00000000, 128 ; 128MB Nor flash(physical Base-> 0x0000_0000) ie. flash phy range = 0x0000_0000 to 0x0800_0000) flash virtual range = 0x9DB0_0000 to 0xA5B0_0000) But SDRAM phy address range = 0xA000_0000 to 0xA800_0000 In this table the flash virtual address range and SDRAM physical address range are overlapping. 1.Will this cause any problem? When I need virtual address of some region of flash(say 0x0316_0000) ,the OALPAtoVA function is returning some wrong address in SDRAM. 2.What could be reason behind it? Thank you Gurus for your support in advance. Regards Bloreiti -- Message posted via PocketPCJunkies.com http://www.pocketpcjunkies.com/Uwe/Forums.aspx/wince-pb/200803/1 Tag: PB5 & default language English (UK) Tag: 110862
  - 13
    - ARM926EJ-S MMU Problem in WinCE5.0 Hi all, I'm developing a bootloader for ARM926 EJ-S, but there's a serious problem need your help. I've enabled MMU in bootloader in order to use virtual addresses. But when I turn off MMU before jumping to the physical start address of kernel, PC (porgram Counter) doesn't jump to the physical address I want. It seems all instructions after turning off MMU cannot be fetched to execute because PC is not there. By the way, I'm sure that MMU has been disabled because I've dumped the memory content with physical address in ICE. I don't know how to solve this problem, but I need this bootloader to bring my WinCE OS image. Hope there's someone could help me.... Thank you very much Best Regards, Sanjay Tag: PB5 & default language English (UK) Tag: 110854
  - 14
    - Shutdown message display Hi All I want to display a full screen message "sleeping" (for example) or a bitmap just before going to suspend. I am suspending by issueing a VK_OFF. What is the correct place to implement this and how to implement. Any suggestions? Best regards. Sohail Tariq -- Message posted via PocketPCJunkies.com http://www.pocketpcjunkies.com/Uwe/Forums.aspx/wince-pb/200803/1 Tag: PB5 & default language English (UK) Tag: 110848
  - 15
    - Processing video data Hi, I have a videodecoder that normally would produce ITU-R BT.656, but because my application does need teletextdata also, I have use raw data mode. So my CE application has to process all data and make it 656 again + teletext data. Doe any one know how to do so? (e.g. is it possible to write a WINCE driver, that based on horizontal/vertial sync interrupts processes the data?) thanks Maarten. -- Maarten Tag: PB5 & default language English (UK) Tag: 110843
  - 16
    - what is the meaning of "Secondary table "? When I debugged the device by KITL, There are many following output: "FLASHDRV.DLL:L2P_GetPhysicalSectorAddr() - Secondary tabledoesn't exist for logical sector 0x0!!! " .... "FLASHDRV.DLL:L2P_GetPhysicalSectorAddr() - Secondary tabledoesn't exist for logical sector 0x...!!! " What is the meaning of "Secondary table "? Why the OS looks for the table? Following is my register settings for FATFS: [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash\FATFS] "FriendlyName"="FAT FileSystem" "Dll"="fatfsd.dll" "Flags"=dword:00500036 ;TFAT force "Paging"=dword:1 "EnableCache"=dword:0 "Util"="fatutil.dll" "MountLabel"=dword:0 "EnableFatCacheWarm"=dword:0 "EnableDataCacheWarm"=dword:0 "FormatTfat"=dword:1 Thanks! Tag: PB5 & default language English (UK) Tag: 110841
  - 17
    - Associating FSD with a hardware device - what am I missing Hello All, NewBie to FSD implementation here. I hope you'll would be kind enough to offer some insight. I am in the process of porting a file system from Windows Desktop to Windows CE. I have created a skeletal dll called PDCFS.dll which is my FSD. From now on I want that when I save a file I want CE to use my new System. So I am trying to associate my FSD with a hardware device. Here is what I did in the registry ; HIVE BOOT SECTION [HKEY_LOCAL_MACHINE\System\StorageManager\Autoload\PDCFS] "Dll"="PDCFS.dll" "Folder"="Storage Card USB" ; END HIVE BOOT SECTION Also the following registrry key is set to PDCFS.dll [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\USBHDProfile] DefaultFileSystem = PDCFS.dll My question is, Is this sufficient to cause my file system to be loaded everytime I try to save a file to the device or do I need more registry settings ? One way to test of course would be to create a test program which saves a file to the \\Storage Card USB\\filename.txt path and to see if the file is being saved through my new FSD. Is there any other way to know for sure ? My FSD is not fully implemented and cuurently hangs when I try to save a file. Is there any way I can know for sure without implementing the MountDisk , UnMoutnDisk ReadFile WriteFile etc. Also any samples on MountDisk , unMountDisk , WriteFile, ReadFile would be appreciated. Thanks in advance, SieWin. Tag: PB5 & default language English (UK) Tag: 110839
  - 18
    - WinCE 6.0 Sychip driver Hello, I am trying to use the Sychip driver included with WinCE 6.0 ( R2 ) with a Sychip 6065 WLAN card. When I plug in the card, I get the following message, and then the pegassdn.dll detaches: 253575 PID:400002 TID:2580016 ==>NdisOpenFile 253575 PID:400002 TID:2580016 Attempting to open * 253577 PID:400002 TID:2580016 ***NDIS*** (5, 3018) 253577 PID:400002 TID:2580016 Error opening file c0000001 253578 PID:400002 TID:2580016 <==NdisOpenFile, Status c001001b My sysgen variable are SYSGEN_SDBUS, IMGSDBUS2, BSP_NIC_WLAN_6060_SDIO. Can some help me figure out what is wrong? Do I need to add some registry settings? Thanks. Tag: PB5 & default language English (UK) Tag: 110837
  - 19
    - Desktop ICON position Very old issue, but there is no clear answer in this user group. I am using WinCE 5.00 and trying to place Desktop ICON in the predefined place permanently, how can I do that. Please help. Tag: PB5 & default language English (UK) Tag: 110827
  - 20
    - usb function mass storage on wince 5.0 Hi all, I am trying to exposes my storage in my device as mass storage to PC. Wince 5.0 is running on the device.I used the following registry settings ================================================================================= [HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers] "DefaultClientDriver"=- ; erase previous default [HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers] "DefaultClientDriver"="Mass_Storage_Class" [HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers\Mass_Storage_Class] "Dll"="usbmsfn.dll" "InterfaceSubClass"=dword:06 "InterfaceProtocol"=dword:50 "DeviceName"="DSK1:" "FriendlyName"="Mass Storage" ; idVendor must be changed. 045E belongs to Microsoft and is only to be used for ; prototype devices in your labs. Visit http://www.usb.org to obtain a vendor id. "idVendor"=dword:045E "Manufacturer"="Generic Manufacturer (PROTOTYPE--Remember to change idVendor)" "idProduct"=dword:FFFF "Product"="Generic Mass Storage (PROTOTYPE--Remember to change idVendor)" "bcdDevice"=dword:0 ===================================================================================== The problem is it is working fine when ethernet KITL is enabled.If i disable the KITL it is not working.In my host PC i am not even getting "USB not Recognized" message. Advanced Thanks, Regards, Prabu Tag: PB5 & default language English (UK) Tag: 110819
  - 21
    - Overlay problem if RGB565 and RGB0888 Hi, Windows CE has a sample program (mosquito.cpp) to show how the overlay works. This program uses RGB565 (with PAL_BGR palette) overlay surface. We use RGB565 surface as a primary surface where the CE 5.0 is running. We have to use RGB0888 overlay surface for our application (showing video stream). Unfortunately our hardware supports only the PAL_RGB surface. So we made some changes in the sample program and created a RGB0888 overlay surface with standard PAL_RGB mask. After some modifications we could create an RGB0888 overlay surface. Finally the mosquito sample program run, but the red and blue channels are changed. So we can see blue because of red color. Could anyone help us what the problem is? Does the WinCE support the RGB_PAL palette at all? Tag: PB5 & default language English (UK) Tag: 110813
  - 22
    - WriteRegistryToOEM/ReadRegistryFromOEM Hi, I am looking into WriteRegistryToOEM/ReadRegistryFromOEM to implement saving of my touch calibration (as everyone is doing all the time) The documentation confuses me a bit : "Only a fully saved registry can be restored; attempting to restore a partial registry produces unpredictable results" I was planning to only save/restore the branch containing the touch callibration. In the simplest form, I would ignore the data parameters passed to the write function, and just write 1 specific branch or value. Also when reading, I want to use the read-call only as a trigger to read in that specific branch. Will this work ? Is the (RAM BASED) registry already present when the first read call comes at boot-time ? Can I use regular registry-functions to get the data I need ? (ignoring the data passed). From the description it looks like the read is called very early on in the initialisation process. So I guess my harddisk is not mounted yet. Can I still use this mechanism when the drive is mounted, or will I not receive a call to read anymore ? In that case I would need to read in the data myself at some point (after HD mount, and before touch-driver-loading), and just use the WriteRegistryFromOem function, to update the datafile when the calibration application has run, right ? If there is a way to re-init the touch driver, I could keep the whole process of saving and restoring OS-independent. Can I do this using ActivateDeviceEx() and its counterpart ? (or just launch the touch driver from the reg-read-app I will create) I donot want to waste time figuring all this out, escpecially since it has been done a zillion times. So if you've made a solution, please let me know. Greetings, Rob. Tag: PB5 & default language English (UK) Tag: 110803
  - 23
    - CE6.0 Hive-based registry in Hard Disk My CE6.0 image is set to hive-based registry, and I want to storage hive files in Hard Disk(FAT file system). But the NK.bin boot failed, and halt at "FILESYS: Waiting for bootable file system to be mounted." I don't know why. 1. Add "RAM and ROM File System", "FAT File System", "Hive-based Registry","ATAPI PCI Support" from catalog. 2. I added the following settings to platform.reg: ======================================= ; HIVE BOOT SECTION [HKEY_LOCAL_MACHINE\init\BootVars] "SystemHive"="Documents and Settings\\system.hv" "ProfileDir"="Documents and Settings" "Flags"=dword:3 "DefaultUser"="Administrator" "RegistryFlags"=dword:2 [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\HDProfile] "MountAsBootable"=dword:1 ; END HIVE BOOT SECTION ======================================= 2. I set the environment variable PRJ_ENABLE_FSREGHIVE = 1, which would affect settings in common.reg: ======================================= ; @CESYSGEN IF FILESYS_FSYSRAM ; HIVE BOOT SECTION [HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\ObjectStore] IF PRJ_ENABLE_FSREGHIVE ! ; Only mount ObjectStore FS as bootable if PRJ_ENABLE_FSREGHIVE is NOT set ; in order to preserve backwards compatibility (hive files go on ; ObjectStore FS by default). "MountAsBootable"=dword:1 ENDIF ; END HIVE BOOT SECTION ; @CESYSGEN ENDIF FILESYS_FSYSRAM =========================================== Now, I copy some debug message as follows: =========================================== FSDMGR!DllMain: DLL_PROCESS_ATTACH CertMod.dll not found, using old OEM Trust Model FileSystem Starting - starting with clean file system FSDMGR!STOREMGR_Initialize FSDMGR!InitializeStoreAPI FSDMGR!MountTable_t::RegisterVolumeName: Registered "StoreMgr" at index 2FSDMGR!MountTable_t::RegisterVolume: Registered volume at index 2 (Name="StoreMgr", MountFlags=0x1)FSDMGR!InitializeROMFileSystem: File System=ROM FSDMGR!MountTable_t::RegisterVolumeName: Registered "ROM" at index 3FSDMGR!MountTable_t::RegisterVolume: Registered volume at index 3 (Name="ROM", MountFlags=0x71)FSVOL: Opening existing volume FSVOL: Volume heap already initialized FSREG: Mounted ROM portion of boot registry FSVOL: Creating clean virtual volume FSVOL: Initializing volume heap FSREG: Mounted RAM portion of boot registry Override Serial Driver: No COM port selected for serial KITL transport, no override necessary. FS: Creating signal event SYSTEM/DevMgrApiSetReady FS: Creating signal event SYSTEM/PowerManagerReady FS: Creating signal event SYSTEM/GweApiSetReady FSREG: Unable to read value "Start DevMgr" under HKEY_LOCAL_MACHINE\init\BootVars FILESYS: Starting boot phase 0. FSDMGR!STOREMGR_StartBootPhase BootPhase=0 (PrevBootPhase=-1) FSDMGR: File security disabled. FSDMGR!AutoLoadFileSystems: CurrentBootPhase=0, LoadFlags=1 FSDMGR!AutoLoadFileSystem: CurrentBootPhase=0, RootKey=System\StorageManager\AutoLoad, FileSystem_t=ObjectStore FILESYS: RAM File System FSD_MountDisk registering folder "Object Store" FSDMGR!MountTableFSDMGR!PNPThread: Using PNPUnloadDelay of 4096 FSDMGR!PNPThread: PNPThread starting! _t::RegisterVolumeName: Registered "Object Store" at index 4FSDMGR!MountTable_t::RegisterVolume: Registered volume at index 4 (Name="", MountFlags=0x44) FILESYS: Starting boot phase 1. FSDMGR!STOREMGR_StartBootPhase BootPhase=1 (PrevBootPhase=0) FSDMGR!AutoLoadFileSystems: CurrentBootPhase=1, LoadFlags=1 FILESYS: Starting device and waiting for boot file system. *** DLL_PROCESS_ATTACH - Current Process: 0x42, ID: 0x400002 *** Filesys: Loaded device.dll FILESYS: Waiting for device manager to signal BootPhase1 completion. +InitDeviceFileSystems ... ... PCIBUS!PCIRequestResources: I/O Resource Manager request for I/O range 0x0-0x3 failed PCIbus!PCIEnum: WARNING: Resource request for device 0:31:1 failed DeviceFolder::LoadDevice(Drivers\BuiltIn\PCI) last 3800 Ticks FILESYS: Waiting for bootable file system to be mounted. FILESYS: Waiting for bootable file system to be mounted. FILESYS: Waiting for bootable file system to be mounted. ... =========================================== Could you help me please? Thanks and best regards. Tag: PB5 & default language English (UK) Tag: 110795
  - 24
    - Slow file transfer Hello, I am using external USB2 controller ,connected to local bus, to connect USB Disk-on-key to our system. Bursts to usb, as seen by logic analyzer are very fast and can reach theoretical speed of 20MBytes per second. however transaction are very slow eventually to the ram file-system. Can some one suggest when is the over-head? After all, after tranffering the data from disk-on-key to HCD driver, the overhead seems to be 10 times the transaction from disk-on-key and that seems to be un-resonable. Anyone? Thanks Oren. Tag: PB5 & default language English (UK) Tag: 110792
  - 25
    - Which One? CE 5.0 or 6.0 or WIN Mobile?!!! Hi All, We are in discussion of a project using CE. Our Device is going to be a fixed on an automotive with GSM/GPRS modem. The device is inteneded to have data communication to a server using GSM/GPRS. [there is no need of voice call support] It also should have handsfree bluetooth and SDIO and Touch and Display etc. We have to decide on the OS to be used. For me i should go for CE Mobile 5.0 or WinCE 6.0 as both of them has GSM/GPRS support. According to my knowledge CE5.0 doesnt hav support for GSM/GPRS. Is my assumptions right? The GSM module vendor has the RIL driver for the chip in WinCE mobile. Which operating system is better for such a device? Any inputs regarding this is most welcome Warm regards Ajith Tag: PB5 & default language English (UK) Tag: 110790
- Next
  - 1
    - CE 6.0 CETK: Storage Device Block Driver Performance Text[Complete Hi all: I run a CETK test in CE6.0 for SD card. the test item is "Storage Device Block Driver Performance Test." I modify the command line as following:(Disk 3 is SD card storage.) tux -o -d disktest_perf.dll -c"-zorch -disk DSK:3" -x1001-1002 After start the command, the result is "complete", not fail or passed. I view the results, it says passed , but I see the pass item is 0. As the following report :: *** SUITE SUMMARY *** *** Passed: 0 *** Failed: 0 *** Skipped: 0 *** Aborted: 0 *** -------- --------- *** Total: 0 So is it successful or something error???? and how do I modify the command?? thank a lots. Tag: PB5 & default language English (UK) Tag: 110789
  - 2
    - Problem with SiliconDrive 1GB Compact Flash. Hi, We are building WinCE 4.2 Os image for ETX233 single board computer from AdLink. We tried to boot the device with SanDisk 128MB/256MB/512MB. And it seems to be working and booting pretty fastly. But when we tried to use SiliconDrive 1GB compact flash, it is taking nearly 15 minutes to boot. We made all proper BIOS settings(LBA mode,etc). Does any face similiar kind of issue ? Could somebody help us in this regards? Thanks in Advance, Ravindran Ramaraj. -- Message posted using http://www.talkaboutsoftware.com/group/microsoft.public.windowsce.platbuilder/ More information at http://www.talkaboutsoftware.com/faq.html Tag: PB5 & default language English (UK) Tag: 110787
  - 3
    - Data abort in the same function every tim Hi Everyone, I just made my CE 6 BSP work. Unfortunately, I got an data abort exception after calling ShowWindow. This happens in every applications. Does anyone have a clue on this by helping check the following information? My platform builder (VS2005) reports: Exception 'Data Abort' (4): Thread-Id=02980002(pth=84d78690), Proc- Id=02970002(pprc=84d78378) 'TestApp1.exe', VM- active=02970002(pprc=84d78378) 'TestApp1.exe' PC=400298f0(coredll.dll+0x000198f0) RA=400298dc(coredll.dll +0x000198dc) SP=0a01f870, BVA=82228f3c The exception is in HimcPrivate::HimcToHimcp. It attempts to read from a kernel memory "0x82228f38" in user space. The following is the callstack. COREDLL!HimcPrivate::HimcToHimcp(unsigned long) address 0x400298bc COREDLL!ImmIsValidIMC + 24 bytes COREDLL!ImmSetActiveContext(struct HWND__ *,unsigned long,int) + 356 bytes K.COREDLL!xxx_PerformCallBack4(_CALLBACKINFO * 0xd070f2a8, void * 0x82228f38, void * 0x00000001, void * 0x00000000) line 292 + 28 bytes K.COREDLL!ImmSetActiveContextInOwnerProcess(HWND__ * 0x00000000, unsigned long 0x00000000, int 0x00000000) line 570 + 20 bytes K.COREDLL!ImmSetActiveContext(struct HWND__ *,unsigned long,int) + 168 bytes GWES!ImmThunk_ImmSetActiveContext(HWND__ * 0x00000000, unsigned long 0x00000000, int 0x00000000) line 217 GWES!MsgQueue::PreprocessReceivedMsg(HWND__ * 0x700238f0, unsigned int 0x00000007, unsigned int 0x00000000, long 0x00000000, bool * 0xd070f3dc) line 1357 GWES!MsgQueue::SendMessageWithOptions(HWND__ * 0x700238f0, unsigned int 0x00000007, unsigned int 0x00000000, long 0x00000000, unsigned int 0x00000000) line 3753 GWES!MsgQueue::SetUicFocus(CWindow * 0x700238f0, unsigned int 0x00000010) line 1039 GWES!SetFocus_I(HWND__ * 0x700238f0) line 1696 + 16 bytes COREDLL!SetFocus(HWND__ * 0x700238f0) line 959 + 28 bytes COREDLL!DefWindowProcW(HWND__ * 0x700238f0, unsigned int 0x00000006, unsigned int 0x00000001, long 0x00000000) line 3133 TESTAPP1!WndProc(HWND__ * 0x700238f0, unsigned int 0x00000006, unsigned int 0x00000001, long 0x00000000) line 298 + 20 bytes K.COREDLL!xxx_PerformCallBack4(_CALLBACKINFO * 0xd070f6bc, void * 0x00000006, void * 0x00000001, void * 0x00000000) line 292 + 28 bytes GWES!WindowProcCallback(void * 0x00000000, long (HWND__ *, unsigned int, unsigned int, long)* 0x03410002, CWindow * 0x00013470, unsigned int 0x700238f0, unsigned int 0xc03bfec0, long 0x03420002, bool * 0xc03bfec0) line 2312 + 20 bytes GWES!CWindow::CallWindowProcW_I(CePtr_t<long (__cdecl*)(HWND__ *,unsigned int,unsigned int,long)> {...}, HWND__ * 0x700238f0, unsigned int 0x00000006, unsigned int 0x00000001, long 0x00000000, SendMsgEntry_t * 0x00000000) line 2473 + 44 bytes GWES!MsgQueue::SendMessageWithOptions(HWND__ * 0x700238f0, unsigned int 0x00000006, unsigned int 0x00000001, long 0x00000000, unsigned int 0x00000000) line 3770 + 68 bytes GWES!MsgQueue::SetUicActiveWindow(CWindow * 0x700238f0, unsigned int 0x00000002) line 708 GWES!MsgQueue::PreprocessReceivedMsg(HWND__ * 0x700238f0, unsigned int 0x00000060, unsigned int 0x700238f0, long 0x00000002, bool * 0xd070fa54) line 1342 GWES!MsgQueue::SendMessageWithOptions(HWND__ * 0x700238f0, unsigned int 0x00000060, unsigned int 0x700238f0, long 0x00000002, unsigned int 0x00000000) line 3753 GWES!MsgQueue_SetActiveWindowInternal(HWND__ * 0x700238f0, unsigned int 0x00000002) line 1463 GWES!CWindow::SetWindowPos_I(HWND__ * 0x700238f0, HWND__ * 0x00000000, int 0x00000000, int 0x00000000, int 0x00000000, int 0x00000000, unsigned int 0x00000043) line 2832 GWES!CWindow::ShowWindow_I(HWND__ * 0x700238f0, int 0x00000005) line 1849 COREDLL!ShowWindow(HWND__ * 0x700238f0, int 0x00000005) line 697 + 32 bytes TESTAPP1!InitInstance(HINSTANCE__ * 0x03410002, int 0x00000005) line 191 TESTAPP1!WinMain(HINSTANCE__ * 0x03410002, HINSTANCE__ * 0x00000000, unsigned short * 0x1001fe8c, int 0x00000005) line 113 + 12 bytes COREDLL!MainThreadBaseFunc(void * 0x00013194, const unsigned short * 0x1001fe70, const unsigned short * 0x1001fe8c, HINSTANCE__ * 0x85dda6cc, HINSTANCE__ * 0x00000000, HINSTANCE__ * 0x00000000) line 1068 + 124 bytes Yours, Lin Tag: PB5 & default language English (UK) Tag: 110786
  - 4
    - kerneliocontrolfail Hello All, I am working to port our bsp from wince 5.0 to 6.0. After removing kitl from oal i found that when i am creating the image without kitl everything works fine. but when i make the image with kitl.Kitl works properly but kerneliocontrol function call fails.Please suggest any reason for it. Thanks Nihar Tag: PB5 & default language English (UK) Tag: 110783
  - 5
    - Microsoft USB Stack fails with SanDisk's U3 technolgy enabled Hi All, We have developed a USB Host Controller driver for TI's DaVinCi platforms and the issue what we have seen with this is that Sandisk pendrive's with U3 technology are failing. SanDisk Pendrive which we used was having some technology called U3 (An option to Install and carry programs with Pen drive itself). Is there any chance that becouse of these SCSI commands can fail. what is being observed is that the SCSI command for Media Changed is being skipped and for the SCSI_MODE_SENSE10 Command it gives RX_STALL in the receive path and after that continously, we get NAK timeouts. To know more about U3 technology, these links can be used. http://u3.sandisk.com/tour/swf_no_wave/tour_en.asp http://www.sandisk.com/Retail/Default.aspx?CatID=1450 What may be the reason for this, Is this a problem with Microsoft Mass storage or SCSI driver. we does n't suspect the host controller, since same host controller in Linux is working fine with the same device. Other than SanDisk we have tested with 5 other models like Transcend, PNY, Sony and all with all these devices it works well. We are using WinCE 6.0. Please help me on this. Regards, Noor Tag: PB5 & default language English (UK) Tag: 110782
  - 6
    - TrueFFS for M-systems G4 and CE4.2 Hi, We used to have in our product a DiskOnChip working nicely with TrueFFS.dll (WINCE420). Because of an end of life of this part, we're going for their G4 model on the future production. From what I understand in the datasheet, we need the version 6.3 or later of TrueFFS.dll. The one we have at the moment is not that recent, although it's still a version 6. It looks like Sandisk bought M-Systems, and as a result all the links for getting this driver are all broken and end onto Sandisk's homepage, where these OEM products aren't listed nor supported. So it looks like it may take a bit of time to obtain anything if we have to go through our parts provider. I'm sure quite a few people have had this issue already, and I wonder if I could get some help or access to the TrueFFS SDK, or get any advise or hint that would let me go forward. Thanks in advance. Alx Tag: PB5 & default language English (UK) Tag: 110779
  - 7
    - usb function mass storage class - RAMDISK folder goes away after usb Hello! I am trying to use the usb function driver with the mass storage class and am losing my RAMDISK folder on my device once I attach the USB cable and the UsbMsFn STORE_Init function is called. Here is the debug from after I attach my USB cable to the host and the STORE_Init() function is called: 344138 PID:c3e49bae TID:e3c7bd92 0x83c747f0: UsbMsFn!STORE_Init: DeviceName = DSK1: 344143 PID:c3e49bae TID:e3c7bd92 0x83c747f0: UsbMsFn!STORE_Init: Removable = 1 344146 PID:c3e49bae TID:e3c7bd92 0x83c747f0: UsbMsFn!STORE_Init: IOCTL_DISK_GETINFO passed 344146 PID:c3e49bae TID:e3c7bd92 0x83c747f0: UsbMsFn!STORE_Init: bytes per sector = 512 344146 PID:c3e49bae TID:e3c7bd92 0x83c747f0: UsbMsFn!STORE_Init: cylinders = 0 344147 PID:c3e49bae TID:e3c7bd92 0x83c747f0: UsbMsFn!STORE_Init: flags = 0xa 344147 PID:c3e49bae TID:e3c7bd92 0x83c747f0: UsbMsFn!STORE_Init: heads = 0 344147 PID:c3e49bae TID:e3c7bd92 0x83c747f0: UsbMsFn!STORE_Init: sectors = 2 344147 PID:c3e49bae TID:e3c7bd92 0x83c747f0: UsbMsFn!STORE_Init: total sectors = 64 344151 PID:3ec4432 TID:e3c7bd92 0x83c747f0: FSD_UnmountDisk(0x1c6700): unmounting... 344151 PID:3ec4432 TID:e3c7bd92 0x83c747f0: FATFS!UnmountDisk: unmounting all volumes on disk 001C6700 344155 PID:3ec4432 TID:e3c7bd92 0x83c747f0: <<< Unloading module diskcache.dll at address 0x03E80000-0x03E89000 (RW data at 0x01FF2000-0x01FF24F4) Unloaded symbols for 'D:\WINCE500\PBWORKSPACES\VESTA\RELDIR \KSO_ARMV4I_DEBUG\DISKCACHE.DLL' 344157 PID:3ec4432 TID:e3c7bd92 0x83c747f0: FATFS!FATDetach complete (0 sectors written in 0 requests) 344158 PID:3ec4432 TID:e3c7bd92 0x83c747f0: <<< Unloading module fatfsd.dll at address 0x03E90000-0x03EBB000 (RW data at 0x01FF4000-0x01FF463C) Unloaded symbols for 'D:\WINCE500\PBWORKSPACES\VESTA\RELDIR \KSO_ARMV4I_DEBUG\FATFSD.DLL' As I said, I am using RAMDISK and already have my DSK1: device with the "Storage Card" folder available on my device. The STORE_Init() function calls OpenStore() and then an IOCTL to GETINFO and then a DismountStore() function call. Does anyone know why this function would want to dismount the store? The STORE_Close() function also calls for the dismount, but that makes sense. Once the DismountStore() function is called, my "Storage Card" folder goes away. Can anyone explain this to me? Is this a bug with that sample? Or am I just doing something wrong? I am using the Microsoft provided \\WINCE500\PUBLIC\COMMON\OAK\DRIVERS\USBFN\CLASS\STORAGE implementation and the STORE_Init() function in \STORAGE\EMULATION \SCSI2\BLOCK\block.cpp and basing my function driver on the mainstone II implementation. I still have not seen my host PC acknowledge my device regardless of whether I allow the dismount to be called or not and will try a USB analyzer next to look at what is going on there. Any help would be greatly appreciated!! Thanks, Vanessa Tag: PB5 & default language English (UK) Tag: 110778
  - 8
    - Linker errors with ASP sample Hello all, I hope this is the correct group. I get linker errors when I try to build the ASP sample in PUBLIC \SERVERS\SDK\SAMPLES\HTTP\ASP on WinCE6. The log below is after a successful full clean build. SYSGEN_OLE*, SYSGEN_DCOM*, and SYSGEN_MINICOM* are all included. Does anyone have any ideas? Thank you. Ryan ------ Build started: Project: Carrier, Configuration: Advantech PCM9377 x86 Debug Platform Builder (_TGTCPU) ------ C:\WINCE600\public\servers\sdk\samples\http\ASP\sources Starting Build: set WINCEREL=1&&build -c&&makeimg ============== BUILD: [Thrd:Sequence:Type ] Message BUILD: [00:0000000000:PROGC ] Build started with parameters: -c BUILD: [00:0000000001:PROGC ] Build started in directory: C: \WINCE600\public\servers\sdk\samples\http\ASP BUILD: [00:0000000002:PROGC ] Checking for C:\WINCE600\sdk\bin \i386\srccheck.exe. BUILD: [00:0000000003:PROGC ] Running passes WCEFILES0, MIDL, MC, ASN, THUNK, PRECOMPHEADER, COMPILE, LIB, LINK, MANAGEDRESX, MANAGEDMOD, MANAGEDDLL, MANAGEDEXE, MANAGEDWIN for x86. BUILD: [00:0000000004:PROGC ] Ignoring build database (-c specified). BUILD: [00:0000000005:PROGC ] Computing include file dependencies: BUILD: [00:0000000006:PROGC ] Checking for SDK include directory: C: \WINCE600\sdk\CE\inc. BUILD: [00:0000000007:PROGC ] Scan C:\WINCE600\public\servers\sdk \samples\http\ASP\ BUILD: [00:0000000008:PROGC ] Saving C:\WINCE600\public\servers \Build.dat. BUILD: [00:0000000010:PROGC ] Building WCEFILES0 Pass in C: \WINCE600\public\servers\sdk\samples\http\ASP\ directory. BUILD: [00:0000000023:PROGC ] Building MIDL Pass in C:\WINCE600\public \servers\sdk\samples\http\ASP\ directory. BUILD: [01:0000000033:PROGC ] Midl Compiling .\admin.idl BUILD: [00:0000000074:PROGC ] Building COMPILE Pass in C: \WINCE600\public\servers\sdk\samples\http\ASP\ directory. BUILD: [01:0000000084:PROGC ] Resource Compiling .\httpadmasp.rc BUILD: [01:0000000089:PROGC ] Compiling .\admin_dll.cpp BUILD: [01:0000000093:PROGC ] Compiling .\stdafx.cpp BUILD: [01:0000000100:PROGC ] Compiling .\settings.cpp BUILD: [01:0000000104:PROGC ] Compiling .\vroots.cpp BUILD: [01:0000000108:PROGC ] Compiling .\admin_i.c BUILD: [00:0000000119:PROGC ] Building LIB Pass in C:\WINCE600\public \servers\sdk\samples\http\ASP\ directory. BUILD: [01:0000000129:PROGC ] Linking C:\WINCE600\public\servers\oak \lib\x86\debug\Httpadmasp.lib BUILD: [01:0000000138:WARNN ] stdafx.obj : warning LNK4221: no public symbols found; archive member will be inaccessible BUILD: [00:0000000152:PROGC ] Building LINK Pass in C:\WINCE600\public \servers\sdk\samples\http\ASP\ directory. BUILD: [01:0000000163:PROGC ] Linking C:\WINCE600\public\servers\oak \target\x86\debug\Httpadmasp.dll BUILD: [01:0000000182:ERRORE] admin_dll.obj : error LNK2001: unresolved external symbol "class ATL::CAtlBaseModule ATL::_AtlBaseModule" (?_AtlBaseModule@ATL@@3VCAtlBaseModule@1@A) BUILD: [01:0000000183:ERRORE] stdafx.obj : error LNK2001: unresolved external symbol "class ATL::CAtlBaseModule ATL::_AtlBaseModule" (? _AtlBaseModule@ATL@@3VCAtlBaseModule@1@A) BUILD: [01:0000000184:ERRORE] settings.obj : error LNK2001: unresolved external symbol "class ATL::CAtlBaseModule ATL::_AtlBaseModule" (? _AtlBaseModule@ATL@@3VCAtlBaseModule@1@A) BUILD: [01:0000000185:ERRORE] vroots.obj : error LNK2019: unresolved external symbol "class ATL::CAtlBaseModule ATL::_AtlBaseModule" (? _AtlBaseModule@ATL@@3VCAtlBaseModule@1@A) referenced in function "public: virtual long __cdecl CVroots::get_Count(long *)" (? get_Count@CVroots@@UAAJPAJ@Z) BUILD: [01:0000000186:ERRORE] admin_dll.obj : error LNK2001: unresolved external symbol "class ATL::CAtlComModule ATL::_AtlComModule" (?_AtlComModule@ATL@@3VCAtlComModule@1@A) BUILD: [01:0000000187:ERRORE] C:\WINCE600\public\servers\oak\target \x86\debug\Httpadmasp.dll : fatal error LNK1120: 2 unresolved externals BUILD: [00:0000000202:PROGC ] Files Warnings Errors BUILD: [00:0000000203:PROGC ] Midl 1 0 0 BUILD: [00:0000000204:PROGC ] Message 0 0 0 BUILD: [00:0000000205:PROGC ] Precomp Header 0 0 0 BUILD: [00:0000000206:PROGC ] Resource 1 0 0 BUILD: [00:0000000207:PROGC ] MASM 0 0 0 BUILD: [00:0000000208:PROGC ] SHASM 0 0 0 BUILD: [00:0000000209:PROGC ] ARMASM 0 0 0 BUILD: [00:0000000210:PROGC ] MIPSASM 0 0 0 BUILD: [00:0000000211:PROGC ] C++ 4 0 0 BUILD: [00:0000000212:PROGC ] C 1 0 0 BUILD: [00:0000000213:PROGC ] Static Libraries 0 0 0 BUILD: [00:0000000214:PROGC ] Exe's 0 0 0 BUILD: [00:0000000215:PROGC ] Dll's 2 1 6 BUILD: [00:0000000216:PROGC ] Preprocess deffile 0 0 0 BUILD: [00:0000000217:PROGC ] Resx 0 0 0 BUILD: [00:0000000218:PROGC ] CSharp Compile 0 0 0 BUILD: [00:0000000219:PROGC ] Other 0 0 1 BUILD: [00:0000000220:PROGC ] BUILD: [00:0000000221:PROGC ] Total 9 1 7 BUILD: [00:0000000222:PROGC ] BUILD: [00:0000000223:PROGC ] 1 Warnings, 7 Errors BUILD: [00:0000000224:PROGC ] GetSystemTimes (seconds): Idle: 0 Kernel: 2 User: 5 BUILD: [00:0000000225:PROGC ] Elapsed time (seconds): 8 Build for Windows CE (Release 601) (Built on Aug 17 2006 15:18:52) File names: Build.log Build.wrn Build.err Build.dat C:\WINCE600\public\servers\sdk\samples\http\ASP\sources - 6 error(s), 1 warning(s) ========== Build: 0 succeeded or up-to-date, 1 failed, 0 skipped ========== Tag: PB5 & default language English (UK) Tag: 110776
  - 9
    - Excluding folders from replication Hi, I would like to exclude the \Temp folder from persistent file replication. However, it does not work with the following registry keys: ;HIVE BOOT SECTION [HKEY_LOCAL_MACHINE\System\StorageManager\Filters\Fsreplxfilt] "NumDirsToExclude"=dword:1 "DirsToExclude"=multi_sz:"\\Temp\\" ;END HIVE BOOT SECTION What's wrong? Thanks, Peter Tag: PB5 & default language English (UK) Tag: 110774
  - 10
    - How to invalidate file replication of persistent storage? Hi, I use file replication for persistent storage under CE6. Is there a mechanism to invalidate the replicated files in order to go back to the original image state? I am looking for something, which is similar to erasing the hive based registry with the kernel ioctl IOCTL_HAL_GET_HIVE_CLEAN_FLAG. Can someone tell me how to do this without erasing the entire FFS (flash file system)? Thank you, Peter Tag: PB5 & default language English (UK) Tag: 110773
  - 11
    - does bluetooth audio gateway conflic with audio codec(sound card) on board? hi, experts, (WinCE 5.0, samsung arm920t cpu.) There was already one audio codec chip on my board ,that had been driven as *WAV0*. i socket another BlueTooth USB Adapter,for communicate with my BlueTooth HeadSet.this BlueTooth Adapter been driven as *WAV1*,(bthscosnd.dll),and then i use below command to find & rounte audio stream & connect the HeadSet.as below, btagconfig -audio on i get, "Opening Bluetooth audio..." "Operation successful." but, nothing happen. ---------------------------------------- after remove *WAV0*,then reset,of couse,this time, WAV1 -> WAV0. i can hear all sound ,even system event sound,from HeadSet. does they conflic?how to use them both? --- my mother language is not english . Tag: PB5 & default language English (UK) Tag: 110770
  - 12
    - Using shared resource from multiple drivers/process Hi ALL, Problem: I have two wince drivers say driver1.dll, driver2.dll and only one DMA channel. I want to share one DMA channel for these two drivers. Since the drivers are running in two seperate processes and want to access the same DMA channel. How we can tell one driver to wait for some time if the DMA channel is already bieng used by other driver. Means how we can achieve lock/unlock the dma channel from two seperate processes. What exact WinCE APIs are there to share the resource from two processes and implement the semaphore. Can anybody comments on this? Thanks in advance. Tag: PB5 & default language English (UK) Tag: 110754
  - 13
    - USB Function Vendor adn Product ID problem Hi, I have a problem with my USB Function Driver. I have a BSP cloned from the Mainstone III. I Use the USB Function without any changes, selection the RNDIS version. All have worked fine for some months, but now i made some change to my BSP and i get an error. When i Plug my USB cable into the PC i can see a device connect but its Vendor ID and its Product ID are both 0. I put this vendor and product ID into the register [HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers\RNDIS] During Runtime i can check the register and see this values. I would like to find the source code where Windows CE send Vendor and Product ID to the PC so i can find why it doesn't read any value (i suppose 0 is a default value). Anyone know where I can find this source code? Otherwise, what should i check in order to find my problem? Regards Rudy rudy.barbieriCHIOCCIOLAdestura.it Tag: PB5 & default language English (UK) Tag: 110748
  - 14
    - HandleSystemEvent 11 I am using Windows CE 5.0,with PXA320 of Marvell. When resuming from deep-sleep, the system hangs and release only after 2-3 minutes. It is hang after: HandleSystemEvent 11 none (see below) where can i find a list of the system events? Someone has an idea why is the o.s. wait for? Debug messages are: 4294784463 PID:a7c804ea TID:a7b53b0e 0x87b1bbd4: XllpLCDSuspend 4294784463 PID:a7c804ea TID:a7b53b0e 0x87b1bbd4: Suspend_Graceful 4294784467 PID:a7c804ea TID:a7b53b0e 0x87b1bbd4: XllpLCDSuspend- 4294784468 PID:7d9ae16 TID:a7b53b0e 0x87b1bbd4: OALIoCtlHalPreSuspend 4294784468 PID:87dc6c0a TID:a7b53b0e 0x87b1bbd4: FS: Got Power notif 0x00000002 4294784468 PID:87dc6c0a TID:a7b53b0e 0x87b1bbd4: FSREG: Registry flush unnecessary 4294784469 PID:87dc6c0a TID:a7b53b0e 0x87b1bbd4: FSRAM: Flushing cached file data 4294784469 PID:7d9ae16 TID:a7b53b0e 0x87b1bbd4: Powering Off system: 4294784469 PID:7d9ae16 TID:a7b53b0e 0x87b1bbd4: Calling GWES power proc. 4294784472 PID:7d9ae16 TID:a7b53b0e 0x87b1bbd4: Calling device manager power proc. 4294784472 PID:7d9ae16 TID:a7b53b0e 0x87b1bbd4: Calling OEMPowerOff... 4294784472 PID:7d9ae16 TID:a7b53b0e 0x87b1bbd4: Back from OEMPowerOff 4294784472 PID:7d9ae16 TID:a7b53b0e 0x87b1bbd4: Calling device manager power proc. 4294784472 PID:7d9ae16 TID:a7b53b0e 0x87b1bbd4: Calling GWES power proc. 4294784472 PID:7d9ae16 TID:a7b53b0e 0x87b1bbd4: Returning to normally scheduled programming. 4294784472 PID:7d9ae16 TID:47b1b6da 0x87af8d8c: ndisMResetCompleteStage2: Internal reset 4294784472 PID:87dc6c0a TID:a7b53b0e 0x87b1bbd4: FS: Got Power notif 0x00000001 4294784472 PID:a7c804ea TID:a7b53b0e 0x87b1bbd4: Back from PowerOffSystem. 4294784472 PID:7d9ae16 TID:a7d2bfbe 0x87d25400: [NOTIFY] HandleSystemEvent 11 none ------------------- here system hangs Tag: PB5 & default language English (UK) Tag: 110745
  - 15
    - TAPI , RIL confusion!! Hi All, We are currently in discussion about a project where we need to support a GSM/GPRS modem which needs to support only data transfer.[no voice calls] I am reading the docs and got confused abt the TAPI and RIL inferfaces. As per my understanding, we need to use RIL inteface of CE and the Modem manufacturer will provide the "RIL driver[PDD]". The application developer can use the RIL interface to talk to the modem to send/receive data. Am i correct? Then what is TAPI interface? Is it only for telephone and not for cell phone? Please guide me. Thanks in Advance Ajith Tag: PB5 & default language English (UK) Tag: 110744
  - 16
    - usb function mass storage problem. hi, I am trying to use usbfunction mass storage,my work based on: D:\WINCE500\Public\Common\OAK\CSP\ARM\Intel\PXA25X\USB\Function\PDD after I connect device to PC, about 1 minute later,a disk ico appear.why so long and how to settle this problem? Tag: PB5 & default language English (UK) Tag: 110743
  - 17
    - WM6 device emulator vs cellular emulator Hi All, With each AKU, there comes a device emulator BSP. Which can build up image for Emulator. With Windows Mobile 6 Professional SDK, there comes a tool named in Cellular Emulator. The default emulator Image in Windows Mobile 6 Professional SDK works fine with the Cellular Emulator tool. I can not get the image I built from AKU platform DEVICEEMULATOR work with Cellular Emulator. How can I build the emulator image that can work with tool Cellular Emulator? Deeply appreciate your response! Cheers, SP Tag: PB5 & default language English (UK) Tag: 110740
  - 18
    - builidng eboot/uboot using cygwin I can't seem to able to build/ make the eboot or uboot successfully. Any suggestion? Tag: PB5 & default language English (UK) Tag: 110730
  - 19
    - How is BSP deployed? Is BSP deployed after OS boots up or before OS boots up? I think it should be deploy to get Nk.bin before OS boots up by using platform wizard, compiled to get nk.bin. I am loss In a PXA255. the sequence of booting up is ===PXA255=== board reset and goes to reset vector address BIOS find bootable disk (Flash, CR, SD card, etc) The bootloader(either eboot or uboot) resides inside MBR BL loads the NK.in onto RAM and which then loads BSP? ==0x86-== board reset and goes to reset vector address BIOS find bootable disk (Flash, CF, SD card etc) goes into MBR to find Bootsector bootsector contains the address to bootloader BL loads the NK.bin Tag: PB5 & default language English (UK) Tag: 110729
  - 20
    - tieing cross compiler onto PB, needed? 1)What is the difference between WinCE5.0 and WinCE5.0 .net? 2)If i am running the above on a PXA255, do i need to reinstall a cross compiler to generate binary on user development machine that are executables on another platform 3)What is the compiler that comes with PB IDE? Is it because compiler are tied to microprocessor and PB only support 0x86? Thanks Alvin Tag: PB5 & default language English (UK) Tag: 110720
  - 21
    - Ordinal missing for MSCOREE2_0.DLL We have build a Windows CE 6 image including Compact Framework 2.0. The hardware has a ARM9 processor. When we are trying to start a very simple .net application we are getting an error that Ordinal 127 is missing. This is the debug output: 93202 PID:400002 TID:3a00002 RELFSD: Opening file ManagedTest.exe from desktop 93299 PID:39f0002 TID:3a00002 OSAXST1: >>> Loading Module 'coredll.dll' (0x8FFFE6CC) at address 0x40010000-0x400EC000 in Process 'ManagedTest.exe' (0x8C19BCD8) 93522 PID:39f0002 TID:3a00002 OSAXST1: >>> Loading Module 'ManagedTest.exe' (0x8C19BCD8) at address 0x00010000-0x00018000 in Process 'ManagedTest.exe' (0x8C19BCD8) PB Debugger Loaded 'C:\WINCE600\OSDESIGNS\ arm9_MINI \RELDIR\ arm9_ARMV4I_RELEASE\MANAGEDTEST.EXE', no matching symbolic information found. s ManagedTest 16:39:50 03/12/2008 W. Europe Standard Time End s ManagedTest 16:39:50 03/12/2008 W. Europe Standard Time 93907 PID:3160002 TID:3170002 debug test message 94318 PID:39f0002 TID:3a00002 Heap Statistics at 0x400DAA68 94529 PID:400002 TID:3a00002 RELFSD: Opening file mscoree.dll from desktop 94952 PID:400002 TID:3a00002 OSAXST1: >>> Loading Module 'mscoree.dll' (0x8A7385C8) at address 0x40600000-0x40611000 in Process 'NK.EXE' (0x89958BC0) PB Debugger Loaded 'C:\WINCE600\OSDESIGNS\arm9_MINI\RELDIR\ arm9_ARMV4I_RELEASE\MSCOREE.DLL', no matching symbolic information found. 94968 PID:3160002 TID:3170002 debug test message 95226 PID:39f0002 TID:3a00002 OSAXST1: >>> Loading Module 'mscoree.dll' (0x8A7385C8) at address 0x40600000-0x40611000 in Process 'ManagedTest.exe' (0x8C19BCD8) 95230 PID:39f0002 TID:3a00002 OSAXST1: >>> Loading Module 'ole32.dll' (0x8C194A44) at address 0x40340000-0x4039D000 in Process 'ManagedTest.exe' (0x8C19BCD8) 95402 PID:400002 TID:3a00002 RELFSD: Opening file ManagedTest.exe from desktop 96023 PID:3160002 TID:3170002 debug test message 96178 PID:400002 TID:3a00002 RELFSD: Opening file mscoree2_0.dll from desktop 100544 PID:3160002 TID:3170002 debug test message 100930 PID:400002 TID:3a00002 OSAXST1: >>> Loading Module 'mscoree2_0.dll' (0x8A738D1C) at address 0x40620000-0x406EB000 in Process 'NK.EXE' (0x89958BC0) PB Debugger Loaded 'C:\WINCE600\OSDESIGNS\arm9_MINI\RELDIR\ arm9_ARMV4I_RELEASE\MSCOREE2_0.DLL', no matching symbolic information found. 101235 PID:39f0002 TID:3a00002 OSAXST1: >>> Loading Module 'mscoree2_0.dll' (0x8A738D1C) at address 0x40620000-0x406EB000 in Process 'ManagedTest.exe' (0x8C19BCD8) 101240 PID:39f0002 TID:3a00002 ERROR: function @ Ordinal 127 missing 101242 PID:39f0002 TID:3a00002 !!! Please Check your SYSGEN variable !!! 101244 PID:39f0002 TID:3a00002 Coredll: DEBUGCHK failed in file C: \ymzki\private\winceos\COREOS\core\dll\usr\..\loader.cpp at line 684 I looked up Ordinal 127 with dependency walker and it is refering to "GAC_AddAssembly". I cannot find anything about this funtion. What should I do? Nick Tag: PB5 & default language English (UK) Tag: 110717
  - 22
    - How to export a BSP in WinCE 6.0 I'm working on a project that is creating a new BSP (starting from something) and I would like to be able to distribute the BSP for other developers to create new OS designs. In WinCE 5.0, there was a BSP export wizard that created an MSI file for the BSP export. I cannot seem to find the equivalent in WinCE 6.0. Can someone point me in the right direction to find a way to export the BSP? Tag: PB5 & default language English (UK) Tag: 110711
  - 23
    - ARMv7, ARMv6, VFPv3, and NEON compiler support Is anyone aware of any option for a compiler to take advantage of ARMv7, ARMv6, VFPv3, or NEON features on Windows CE 6.0? I'm aware that neither Visual Studio nor PB itself will support these instruction sets, so I'm open to the idea of using a third party compiler if any will link with applications built by Visual Studio. I haven't found anything, but I'm open to ideas. I have an application that will tremendously benefit from the hardware if I can find a compiler (not an assembler) to take advantage of it. Tag: PB5 & default language English (UK) Tag: 110707
  - 24
    - TSP - DEVCFG Structure Hello everyone, I have done a Telephony Service Provider to use our OEM modem. I have based my code on the sample found in "public\common\oak\drivers\samptspi\" . This sample works well except it hasn't the extra init strings under the call option dialog. I have modified the resource file to add it to the dialog. Now, the problem I have is that I cannot get a DEVCFG structure that is working with it. I am really confused because it seems that it has several structures available. I thought we could change the structure so it has a variable for stocking the extra string but if I do so, I got errors in TSPI_lineGetDevConfig() and TSPI_lineSetDevConfig(). The size doesnt match the received in paramaters. Do you have information about this structure and how I should handle it? What do I have to do so TSPI_lineGetDevConfig() and TSPI_lineSetDevConfig() receiced my newly defined DEVCFG structure in parameters? Regards, Tag: PB5 & default language English (UK) Tag: 110701
  - 25
    - Could not able to install 2007 rollup Hi all, wince 6.0. I just uninstalled and reinstalled vs 2005 and pb 6.0, after installing the pb in the following order 1 - VS2005 2 - VS2005 SP1 3 - CE6 plugin 4 - CE6 Cumulative QFE through 12/06 5 - CE6 SP1 6 - R2 when i try to install 2007 rollup update, it reported an error message that "This installation required Microsoft windows embedded ce 6.0 to be installed, please install pb 6.0....". I just opened vs 2005 and verified that pb 6.0 is installed and also creates a workspace in that, please help me what has to be done??? Thanks in advance Tag: PB5 & default language English (UK) Tag: 110700

hello all,
my platform is been configurated with different language as Chinese, French,
Italian, English (UK), Spain etc ... when in "Platform settings - Locale -
Default language set Italian language or French for example, the platform
rebuild correctly without error. Why if I set as default language English
(UK) my platform rebuild fails ?
In the output widows the error is :
"Could not find file
'C:\63720461\RelDir\VIA_Twister_x86_Release\intlfile\0809\RGUI_ChangePassword_Loc.js' on disk"

--
Thanks,
stefano

Top