How to convert the cec file for ce5.0 to the pbcxml file for ce6.0?

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - user rights hello all does windows ce have the same user rights mechanism as windows? user rights, security groups, user profiles etc. Can I, for example, create a user for the windows ce that can access only several applications, can't delete certain folders etc? thank you, christina I'm sorry for sendign this message to 2 groups, but both seem appropriate for my question. Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 99032
  - 2
    - BUILD ONLY COREDLL Hi, Is it possible to build only COREDLL.DLL and not all platform???? In order to create all the platform is necessary much time and for me is a problem. Thanks Miky Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 99030
  - 3
    - Serial Connection over USB Hi all! I have a test-application that runs on my Windows CE device and require an COM-port(or other stream-interface) or TCP/IP for communication with a host PC. On the PC-side is annother application that require a COM-port or TCP/IP for communication with the device. The problem is that the Windows CE-device im using does not have any serial port or ethernet-interface. But it does have USB where ActiveSync works just fine! After trying for a few days i have concluded that the solution is not as easy as just adding the "USB Function Serial Client Drivers" or RNDIS in Platform Builder. As usual, the documentation from Microsoft is about 20 pages x10 lines of nothing. Does anyone know how to solve this or where to find a third party SW that does this? Thanks, Mats S Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 99029
  - 4
    - Config.bib error? help Dear all, I'm working on arm926ej soc, when booting the kernel, it is down just like: Windows CE Kernel for ARM (Thumb Enabled) Built on Feb 8 2007 at 23:37:12 ProcessorType=0926 Revision=5 sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 8011b588 DCache: 128 sets, 4 ways, 32 line size, 16384 size ICache: 128 sets, 4 ways, 32 line size, 16384 size sysIntr = 16 -OEMInit Error Reporting Memory Reserved, dump size = 00020000 Booting Windows CE version 5.00 for (ARM) &pTOC = 80109c1c, pTOC = 80213c88, pTOC->ulRamFree = 82080000, MemForPT = 00000000 Booting kernel with existing memory configuration: Memory Sections: [0] : start: 82081000, extension: 00002000, length: 01d5d000 ERROR: d:\macallan\private\winceos\coreos\nk\kernel\physmem.c line 284: RemovePage : removing invalid address 0x00000000 (PFN 0x00000000) NK Kernel: DEBUGCHK failed in file d:\macallan\private\winceos\coreos \nk\kernel\physmem.c at line 285 my config.bib just like: MEMORY ; RSVD 80000000 000FF000 RESERVED ARGS 800FF000 00001000 RESERVED NK 80100000 01e00000 RAMIMAGE RAM 82000000 01e00000 RAM anyone can help me? Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 99027
  - 5
    - WinCE50 crashes while the Calibration.exe is running Dear all: My OS has the following appearance: - Calibration.exe is running - Press "Suspend" button Then the OS(WinCE50) will be crashed!! Only crushed while the Calibration.exe is running. Does anyone has the problem? Refer the link: http://msdn2.microsoft.com/en-us/library/ms900951.aspx In the step2: 2. Abort calibration if the calibration screen is up and in one of the following states: ^^^^^^^^^^^^^^^^^^^^ How to abort the calibration? Please give me some hint, Thanks first. Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 99024
  - 6
    - PB install question .. Hi Can I have all 4.2 5.0 and 6.0 on WinXP ( because I have different vendor BSPs ) ? And how about install PB on Windows Vista ? I've tried installed on it but failed to build CE 5.0 emulator . Thank you . Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 99020
  - 7
    - Why can not WINCE6.0 Eval install package can not be downloaded? I want to download the whole WINCE6.0 eval install package from MS website. But only the setup.msi file is available for download. Any guy in MS can tell me how to download the WINCE6.0 eval package? Thanks Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 99019
  - 8
    - Window CE VLAN support Hi Do any microsoft expert know that if WinCE 5.0 support VLAN? Or is it just depend on the drivers? Here is the scenerio we want to do: When we move from one WiFi access point to another WiFi access point with same SSID, the network will automatically switch from one to another. Thanks very much~~~ Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 99016
  - 9
    - What's the usage of this ARM assembly instruction? I saw such an instruction in fw.s in Eboot and HAL code of S3C24A0 BSP. add r0, pc, #OEMAddressTable - (. +8) I don't know the last section "- (. +8)". Please help me. Thanks. Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 99015
  - 10
    - my build process and error Hey all, I posted on March 21-23 about what build.exe does. I have some more questions about my customized build process. 1. I am trying to do the following: Set environment variables to use command line to build win ce image: I changed _DEPTREES to not include my project as I wanted to build all the win ce libraries and image files with 'cebuild.bat clean'. I then manually build my subprojects using build.exe. Then I run buildrel.bat to copy all files to release directory. *** Get bunch of warning about files not existing. A small clip: BUILD: [00:0000002676:WARNN ] File: C:\WINCE600\platform\common\lib\ARMV4I\debug \oal_timer_cntcmp.pdb does not exist (2). BUILD: [00:0000002677:WARNN ] File: C:\WINCE600\platform\common\lib\ARMV4I\debug \oal_timer_fixtick_pxa27x_ms_v1.pdb does not exist (2). BUILD: [00:0000002678:WARNN ] File: C:\WINCE600\platform\common\lib\ARMV4I\debug \oal_timer_idle.pdb does not exist (2). BUILD: [00:0000002679:WARNN ] File: C:\WINCE600\platform\common\lib\ARMV4I\debug \oal_timer_idle_fake.pdb does not exist (2). BUILD: [00:0000002680:WARNN ] File: C:\WINCE600\platform\common\lib\ARMV4I\debug \oal_timer_idle_stub.pdb does not exist (2). *** I then use makeimg to build the image. *** Get the following error: Windows CE ROM Image Builder v4.0.120 Copyright (c) Microsoft Corporation Built: Jul 25 2006 16:37:02 Error: Could not find file 'C:\WINCE600\OSDesigns\HelloWorld\HelloWorld\RelDir\D eviceEmulator_ARMV4I_Debug\kitl.dll' on disk kitl.dll C:\WINCE600\OSDesigns\HelloWorld\HelloWorld\RelDir\DeviceEmulator_ARMV4 I_Debug\kitl.dll NK SHZ Error: failed setting line makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec). makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec). *** When I leave my project HelloWorld in _DEPTREES everything works. Ideally I would like to have a process to build all the wince os image files pertaining to the sysgen environment variables I specify and then be able to build my subprojects separately (perhaps even with gnu compiler) and then makeimage. I appreciate any tips or corrections to my process or answer to why kitl.dll isnt being built? Is it because I didnt inform cebuild.bat of my project HelloWorld and it needs my subprojects to build kitl.dll? Thanks, --Mike Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 99013
  - 11
    - WinCE Update releases for the month of March 2007 The Microsoft® Windows® CE update rollup will be released the second Tuesday of every month, the latest release occurring on or around April 10th, 2007. The following updates for Windows CE have been recently released and are available for download. More information for each update is provided in the Readme document available after the individual update(s) has been installed. Windows CE 4.2 Update name: Windows CE 4.2 Platform Builder Monthly Update (March 2007) Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=C49236E8-EB1F-446D-809A-A469022C2F08&displaylang=en Description: This is a set of updates for Windows CE Platform Builder released during the period of March 1 - March 31, 2007. These Microsoft Windows CE updates are fixes for Windows CE operating system problems you run into during the development and maintenance of your custom platform. Windows CE 5.0 Update name: Windows CE 5.0 Platform Builder Monthly Update (March 2007) Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=31B27925-0CF7-47F5-ACE2-DA478BF4F0BC&displaylang=en Description: This is a set of updates for Windows CE Platform Builder released during the period of March 1 - March 31, 2007. These Microsoft Windows CE updates are fixes for Windows CE operating system problems you run into during the development and maintenance of your custom platform. Windows CE 6.0 Update name: Windows Embedded CE 6.0 Monthly Update (March 2007) Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=021F5CFD-95FE-4BCF-AED2-15C0296370DA&displaylang=en Description: This is a set of updates for Windows Embedded CE Builder released during the period of March 1 - March 31, 2007. These Microsoft Windows Embedded CE updates are fixes for Windows CE operating system problems you run into during the development and maintenance of your custom platform. Download Link - directs you to the Microsoft Download Center page associated with each update. Each update is contained in a self-extracting compressed file. Component - displays the module(s) updated in each update Description - provides more information on the issue(s) fixed **DO NOT REPLY - THIS E-MAIL IS BEING SENT TO YOU FROM AN UNMONITORED ACCOUNT. Due to Microsoft's security requirements, the hyperlink(s) contained in this e-mail may not automatically open your browser. If you experience any difficulty, please copy the link and paste into your browser. ** Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 99012
  - 12
    - Multiple IP addresses on one adapter (Need to get Mr. Tobey's Attention) I was searching through some posts on using multiple IP addresses on a single adapter, and I came upon a few responses from Paul Tobey. You cracked me up. It is funny that you were starting to get a bunch of these questions, and here I am with the same question. Well, I already found out how to do it, but was wondering if you think my use of two IP addresses is appropriate or not. I have a wince device with one network card. I have a switch. I have a IP based radio in bridge mode between its wired and wireless adapter. The CE device, Switch, and radio are all built into a single case. The CE Device and radio BOTH have web servers to configure their settings. The CE device and radio are both hooked to the switch. In adding a bunch more of these to the network, we effectively get a big network of Radios and CE devices. My idea is to set the radios configuration IP to a fixed 10.x.x.x address, along with one address of the CE device's adapter. The other CE devices IP address will be whatever the user wants it as. By doing things this way, the user will not be able to get to the radio web page (We want to handle the configuration of the radio through our software), unless he changes the ip of his web browsers machine. This also eases the configuration difficulties of having to manage a network with both radios and devices. Does anyone see a better way to do this? Thanks, Tom Kuhn Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 99010
  - 13
    - display : bottom lines was shown at top Clear DayHi all, I am working on the LCD display driver for PXA300. The driver works fine except the screen was not aligned to the screen physical left-up conner. In portrait mode, the MS logo is not displayed at (0,0), but instead displayed at (0,5), and the part which should displayed at (0,315)-(239,319) is displayed at (0,0)-(239,4). Any guy here have idea on what caused this problem? any comment is welcomed! Kennday Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 99007
  - 14
    - Is Postlink.bat functional in CE 6.0? I'm trying to convert a BSP from 5.0 to 6.0. This looks to be a manual task as the command line based, CEC import tool does not produce anything but errors. I have added one precompiled driver from my 5.0 BSP to my 6.0 tree as a test case. There is no source for this driver, just the .dll file and associated .reg and .bib files. I modified the Catalog file (.pbcxml) to include the driver. It is visible in the Catalog and selected to be part of the build. V5.0 required the precompiled .dll and the associated .reg file to be copied to the _FLATRELEASEDIR using POSTLINK.BAT. This methodology does not appear to work in 6.0 but there is no documentation that I can find regarding a change in this regard. Am I missing something? If the methodology has changed (again), where is it documented? Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 99005
  - 15
    - Trouble resolving CEFilter error Hi All, I am porting a Samsung BSP from 5.0 to 6.0 and I succeeded in building oal.exe and kitl.dll respectively. However, when I give a build for the entire workspace, the following error is displayed: CEFilter error. Missing "@CESYSGEN IF" statement(s) detected. C:\WINCE600\PLATFORM\SMDK2442\dirs - 1 error(s), 20 warning(s) As a prelude to this error following is the build log that is generated (I have attached about 15-20 lines): BUILD: [00:0000000130:PROGC ] Building LINK Pass in C: \WINCE600\PLATFORM\SMDK2442\Src\Bootloader\Stepldr\ directory. BUILD: [00:0000000142:WARNN ] C:\WINCE600\PLATFORM\SMDK2442\Src\Oal \OalExe\sources(61) : Build.exe does not evaluate IF conditional statements. Conditional statements that affect macro definitions might cause Build.exe to not rebuild modified source code. Refer to the Platform Builder documentation. BUILD: [00:0000000143:WARNN ] C:\WINCE600\PLATFORM\SMDK2442\Src\Kitl \sources(47) : Build.exe does not evaluate IF conditional statements. Conditional statements that affect macro definitions might cause Build.exe to not rebuild modified source code. Refer to the Platform Builder documentation. BUILD: [00:0000000144:PROGC ] Saving C:\WINCE600\PLATFORM \SMDK2442\Build.dat. BUILD: [00:0000000146:PROGC ] Done. BUILD: [00:0000000147:PROGC ] Files Warnings Errors BUILD: [00:0000000148:PROGC ] Midl 0 0 0 BUILD: [00:0000000149:PROGC ] Message 0 0 0 BUILD: [00:0000000150:PROGC ] Precomp Header 0 0 0 BUILD: [00:0000000151:PROGC ] Resource 0 0 0 BUILD: [00:0000000152:PROGC ] MASM 0 0 0 BUILD: [00:0000000153:PROGC ] SHASM 0 0 0 BUILD: [00:0000000154:PROGC ] ARMASM 0 0 0 BUILD: [00:0000000155:PROGC ] MIPSASM 0 0 0 BUILD: [00:0000000156:PROGC ] C++ 0 0 0 BUILD: [00:0000000157:PROGC ] C 0 0 0 BUILD: [00:0000000158:PROGC ] Static Libraries 0 0 0 BUILD: [00:0000000159:PROGC ] Exe's 0 0 0 BUILD: [00:0000000160:PROGC ] Dll's 0 0 0 BUILD: [00:0000000161:PROGC ] Preprocess deffile 0 0 0 BUILD: [00:0000000162:PROGC ] Resx 0 0 0 BUILD: [00:0000000163:PROGC ] CSharp Compile 0 0 0 BUILD: [00:0000000164:PROGC ] Other 0 1 0 BUILD: [00:0000000165:PROGC ] BUILD: [00:0000000166:PROGC ] Total 0 1 0 BUILD: [00:0000000167:PROGC ] BUILD: [00:0000000168:PROGC ] 1 Warnings, 0 Errors BUILD: [00:0000000169:PROGC ] GetSystemTimes (seconds): Idle: 2 Kernel: 3 User: 2 BUILD: [00:0000000170:PROGC ] Elapsed time (seconds): 5 Build for Windows CE (Release 601) (Built on Aug 17 2006 15:18:52) File names: Build.log Build.wrn Build.err Build.dat CEFilter error. Missing "@CESYSGEN IF" statement(s) detected. Has anyone faced the same error before? If yes, how do I resolve it? Thanks and Regards, Treadstone Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 99001
  - 16
    - CEPC USB Support Hi All, I am reposting this for the attention of all USB exports. I enabled the USB UHCI and EHCI support in CEPC build and loaded the NK.BIN image using loadcepc. Also no legacy USB support in BIOS. But there is no response to any USB device and no pop-up wizard for driver installation. 1) The debug console shows HCD load and there is no specific error reported. 0x83fa1e08: HCD driver DLL attach 0x83fa1e08: HCD!HCD_Init 2) I enabled all the debug zones and the below message is coming periodically CPipe::CheckForDoneTransfersThread - warning! Called when no pipes were busy 3) Also the HCD documentation says, the default HCD module is hard- coded for Ven ID 0x8086 and DEV ID 0x7112. Is this still hold true for CE5.0 ? ( My VEN ID is same, but DEV ID is different ) 4) From the mailing list, I understood the hardcoded value is "UHCD_DEVICE_ID_PIIX4" in UHCD.C for CE3.0. But in CE5.0 source code, I am not able to locate the same. Can anyone list out the exact steps of adding USB support in CEPC? Thanks in advance Suja. Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98997
  - 17
    - Windows CE memory release Dear Greats, We are working on Windows CE 5.0 Operating system, Explorer template. (AMD Au1200, Board Support Package) is used. We have written one simple application main() { char * strTemp = new char[10]; getch() delete [] strTemp } The problem we are observing is, After 'new" two heaps of 4K is created (This we have monitored in using Entrek ProcMan tool). One 4K heap has 16 bytes are allocated and left are shown as free space. After "delete", one of the 4K heap is deleted but the additional heap created is not deleted. Kindly any one of you can guide us on solving this problme. because of this the system memory is growing up and ending in a crash. Can we use HeapCompact call to clear up this process memor? Can run a separate thread in Windows CE OS to clearing the memory marked for deletion. With regards, Mams Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98996
  - 18
    - Where is MMU TLB placed at wince? Dear all, when I check the register of CP15/C2, It seems varied acorrding to the length of the nk.bin, I want to know How the location is decided ? and where I can change the location to place TLB? anyboay can help me ? thanks in advance. Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98990
  - 19
    - USB HCD for SH7760 Hello I'm asking for some advice. Did anybody develop an USB HCD device for SH4 processors? I've made it, on the basis of source code from Microsoft (c:\WINCE500\PUBLIC\COMMON\OAK\DRIVERS\USB\HCD\), but it does not work. I've been solving it for three weeks and I can't find any mistake. After plug in any USB device nothing happens. I thought, that I had some mistake around interrupts, but it seems ok. I don't have any idea how to go on. Are there anybody, who could help me? George H. Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98988
  - 20
    - Test Post! This is just a test post in WINCE PB ng. Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98985
  - 21
    - About IE binding on Windows Mobile 5 We wrote a WLAN connection setup program on Windows Mobile 5. This program setup an IP connection by DHCP. We have got an IP address and can ping successfully. Then, we open IE to browsing. But IE canâ??t detect our connection and try to setup a connection again. What's happened? Thanks! -Kemin Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98984
  - 22
    - VirtualPC 7 - CEPC Hello, Has anyone created a CEPC 6.0 image and have it running under VirtualPC 7? If so how did you go about it? Thanks. Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98979
  - 23
    - error when doing clean sysgen of new CEPC platform I am trying to create a custom runtime image for a CEPC platform but when I do a build and sysgen for CEPC: x86_Release, I get the following error: NMAKE : fatal error U1077: 'renumbericonids' : return code '0xfffffffd' I've tried doing a sysgen, build and sysgen, debug, retail, from PB, from the commandline, etc. Nothing works The platform builds just fine when doing a sysgen for the Emulator though. Any suggestions? Cheers, Marty Neal Qualnetics Co. Copying localized RESs for 0409 to C:\WINCE500\PBWorkspaces\CEPC_FULL \WINCE500\CEPC_x86\cesysgen\oak\target\x86\retail\0409 mkdir C:\WINCE500\PBWorkspaces\CEPC_FULL\WINCE500\CEPC_x86\cesysgen \oak\target\x86\retail\0409 > nul 2>&1 xcopy /I C:\WINCE500\public\shell\oak\lib\x86\retail\0409\*.res C: \WINCE500\PBWorkspaces\CEPC_FULL\WINCE500\CEPC_x86\cesysgen\oak\target \x86\retail\0409 > nul nmake /NOLOGO ceshell makefile.def: Invoked with predefined settings: TARGETNAME: dummy TARGETTYPE: dummy RELEASETYPE: TARGETLIBS: SOURCELIBS: makefile.def: BUILDROOT is C:\WINCE500\public\shell\cesysgen 0 Please add _COMMONPUBROOT and __PROJROOT to your tree's cesysgen \sources file. Directory: C:\WINCE500\PUBLIC\SHELL\CESYSGEN TARGETNAME: dummy RELEASETYPE is not defined. Using DEFAULT. makefile.def: Including C:\WINCE500\public\common\oak\misc \sources.ReleaseType_DEFAULT del /q C:\WINCE500\PBWorkspaces\CEPC_FULL\WINCE500\CEPC_x86\cesysgen \oak\target\x86\retail\0409\ceshell.res renumbericonids %CESHELL_RESOURCES% C:\WINCE500\public\shell\oak\lib\x86\retail\0409\ceshapi_vgal.res: warning RenumberIconIds: Ignoring unsupported res type (BOOL) at offset(0x32) RenumberIconIds: Found 1 Warnings C:\WINCE500\public\shell\oak\lib\x86\retail\0409\ceshapi_vgal.res: warning RenumberIconIds: Ignoring unsupported res type (BOOL) at offset(0x32) RenumberIconIds: Found 1 Warnings res2res %CESHELL_RESOURCES% -fo C:\WINCE500\PBWorkspaces\CEPC_FULL \WINCE500\CEPC_x86\cesysgen\oak\target\x86\retail\0409\ceshell.res Res2Res for Windows CE (Debug) (Built on Jun 11 2004 10:49:59) Copyright (C) Microsoft Corp. 1991-2004. All rights reserved. Res2Res: Ignoring "dummy" Res2Res: Using C:\WINCE500\public\common\oak\Bin\i386\R2RDUMMY.DLL for temp exe Res2Res: Using resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\ceshapi_vgal.res. Res2Res: Adding resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\ceshapi_vgal.res to C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp \R2R1B45.tmp. Res2Res: Using resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\ceshapi_base.res. Res2Res: Adding resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\ceshapi_base.res to C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp \R2R1B45.tmp. Res2Res: Using resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\ceshui_vgal.res. Res2Res: Adding resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\ceshui_vgal.res to C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp \R2R1B45.tmp. Res2Res: Using resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\ceshui_base.res. Res2Res: Adding resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\ceshui_base.res to C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp \R2R1B45.tmp. Res2Res: Building C:\WINCE500\PBWorkspaces\CEPC_FULL \WINCE500\CEPC_x86\cesysgen\oak\target\x86\retail\0409\ceshell.res from temp file C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\R2R1B45.tmp. Set SizeOfResources: 0001f000 Set VirtualSize: 0001ecf8 SizeOfResources: 0001f000 SizeOfResources: 0001f000 SizeOfResources: 0001f000 res2res C:\WINCE500\public\shell\oak\lib\x86\retail \0409\explorer_vgal.res C:\WINCE500\public\shell\oak\lib\x86\retail \0409\explorerbase.res -fo C:\WINCE500\PBWorkspaces\CEPC_FULL \WINCE500\CEPC_x86\cesysgen\oak\target\x86\retail\0409\explorer.res Res2Res for Windows CE (Debug) (Built on Jun 11 2004 10:49:59) Copyright (C) Microsoft Corp. 1991-2004. All rights reserved. Res2Res: Using C:\WINCE500\public\common\oak\Bin\i386\R2RDUMMY.DLL for temp exe Res2Res: Using resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\explorer_vgal.res. Res2Res: Adding resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\explorer_vgal.res to C: \DOCUME~1\ADMINI~1\LOCALS~1\Temp\R2R1B4A.tmp. Res2Res: Using resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\explorerbase.res. Res2Res: Adding resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\explorerbase.res to C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp \R2R1B4A.tmp. Res2Res: Building C:\WINCE500\PBWorkspaces\CEPC_FULL \WINCE500\CEPC_x86\cesysgen\oak\target\x86\retail\0409\explorer.res from temp file C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\R2R1B4A.tmp. Set SizeOfResources: 0001f000 Set VirtualSize: 0001ef00 SizeOfResources: 0001f000 SizeOfResources: 0001f000 SizeOfResources: 0001f000 res2res C:\WINCE500\public\shell\oak\lib\x86\retail \0409\explorer_vgal.res C:\WINCE500\public\shell\oak\lib\x86\retail \0409\explorerbase.res -fo C:\WINCE500\PBWorkspaces\CEPC_FULL \WINCE500\CEPC_x86\cesysgen\oak\target\x86\retail\0409\explorer.res Res2Res for Windows CE (Debug) (Built on Jun 11 2004 10:49:59) Copyright (C) Microsoft Corp. 1991-2004. All rights reserved. Res2Res: Using C:\WINCE500\public\common\oak\Bin\i386\R2RDUMMY.DLL for temp exe Res2Res: Using resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\explorer_vgal.res. Res2Res: Adding resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\explorer_vgal.res to C: \DOCUME~1\ADMINI~1\LOCALS~1\Temp\R2R1B4D.tmp. Res2Res: Using resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\explorerbase.res. Res2Res: Adding resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\explorerbase.res to C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp \R2R1B4D.tmp. Res2Res: Building C:\WINCE500\PBWorkspaces\CEPC_FULL \WINCE500\CEPC_x86\cesysgen\oak\target\x86\retail\0409\explorer.res from temp file C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\R2R1B4D.tmp. Set SizeOfResources: 0001f000 Set VirtualSize: 0001ef00 SizeOfResources: 0001f000 SizeOfResources: 0001f000 SizeOfResources: 0001f000 Copying localized RESs for 0404 to C:\WINCE500\PBWorkspaces\CEPC_FULL \WINCE500\CEPC_x86\cesysgen\oak\target\x86\retail\0404 mkdir C:\WINCE500\PBWorkspaces\CEPC_FULL\WINCE500\CEPC_x86\cesysgen \oak\target\x86\retail\0404 > nul 2>&1 xcopy /I C:\WINCE500\public\shell\oak\lib\x86\retail\0404\*.res C: \WINCE500\PBWorkspaces\CEPC_FULL\WINCE500\CEPC_x86\cesysgen\oak\target \x86\retail\0404 > nul nmake /NOLOGO ceshell makefile.def: Invoked with predefined settings: TARGETNAME: dummy TARGETTYPE: dummy RELEASETYPE: TARGETLIBS: SOURCELIBS: makefile.def: BUILDROOT is C:\WINCE500\public\shell\cesysgen 0 Please add _COMMONPUBROOT and __PROJROOT to your tree's cesysgen \sources file. Directory: C:\WINCE500\PUBLIC\SHELL\CESYSGEN TARGETNAME: dummy RELEASETYPE is not defined. Using DEFAULT. makefile.def: Including C:\WINCE500\public\common\oak\misc \sources.ReleaseType_DEFAULT del /q C:\WINCE500\PBWorkspaces\CEPC_FULL\WINCE500\CEPC_x86\cesysgen \oak\target\x86\retail\0404\ceshell.res Could Not Find C:\WINCE500\PBWorkspaces\CEPC_FULL \WINCE500\CEPC_x86\cesysgen\oak\target\x86\retail\0404\ceshell.res renumbericonids %CESHELL_RESOURCES% C:\WINCE500\public\shell\oak\lib\x86\retail\0404\ceshapi_vgal.res: warning RenumberIconIds: Ignoring unsupported res type (BOOL) at offset(0x32) C:\WINCE500\public\shell\oak\lib\x86\retail\0404\ceshapi_vgal.res: error RenumberIconIds: Cannot open output file C:\WINCE500\public\shell\oak\lib\x86\retail\0404\ceshapi_vgal.res: warning RenumberIconIds: Ignoring unsupported res type (BOOL) at offset(0x32) C:\WINCE500\public\shell\oak\lib\x86\retail\0404\ceshapi_vgal.res: error RenumberIconIds: Cannot open output file NMAKE : fatal error U1077: 'renumbericonids' : return code '0xfffffffd' Stop. NMAKE : fatal error U1077: 'C:\WINCE500\sdk\bin\i386\nmake.exe' : return code '0x2' Stop. Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98974
  - 24
    - Newbee to PB (CEDDK question) Hi Guys, Presently I am working on Windows Mobile 5.0 TI OMAP 850 platform. 1) I would like to know how to generate the CEDDK.dll out of an exisiting BSP, which has only the CEDDK.h header file and no .lib file? 2) Is it possible to use FSample BSP to create this CEDDK.dll and then use it on other OEMs TI OMAP 850 platforms? Thanks, -- SAR, Windows CE/Mobile Developer. Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98973
  - 25
    - parameter range checking I need to do parameter range checking in and to check the return value of functions.I have not done it before.so please guide me. Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98961
- Next
  - 1
    - makeimg: FATAL ERROR:-( - help me Hi, In my project i'm using MIPSII BSP & added to platform builder's Add catalog item's third party BSP section. OS design templates are all created and even i had Build & Sysgen the projects. I got 0 - errors & 0 - warnings. But when i try to "Make Image" from Build OS menu, i'm getting the following errors. makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec). makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec). Please help me out on how to fix this bug & to get error free images at "Make Image". Expecting your reply as early as possible. regards, Pradeep Kumar Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98960
  - 2
    - Problem faced while porting BSP to WinCE 6.0 Hi All, I am porting a Samsung BSP from Windows CE 5.0 to Windows CE 6.0. I followed all the steps mentioned in MSDN to separate the Kernel, OAL and KITL. While building Oal.exe the following errors were displayed: BUILD: [00:0000000725:PROGC ] Building LINK Pass in C: \WINCE600\PLATFORM\SMDK2442\Src\Oal\OalExe\ directory. BUILD: [01:0000000738:PROGC ] Linking C:\WINCE600\platform \SMDK2442\target\ARMV4I\debug\oal.exe BUILD: [01:0000000755:ERRORE] oal_rtc_s3c2440a.lib(rtc.obj) : error LNK2001: unresolved external symbol g_oalLogMask BUILD: [01:0000000756:ERRORE] oal_ioctl_s3c2440a.lib(reboot.obj) : error LNK2001: unresolved external symbol g_oalLogMask BUILD: [01:0000000763:ERRORE] oal.lib(init.obj) : error LNK2001: unresolved external symbol CEProcessorType BUILD: [01:0000000764:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol pQueryPerformanceCounter BUILD: [01:0000000765:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol pQueryPerformanceFrequency Do I have to include any additional library files in my BSP sources? Has anyone encountered a similar error? Thanks in Advance. Treadstone Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98959
  - 3
    - WinCE 4.2 2K Nand Flash got cut/paste problem Hi all, I follow the following email to modify the fsd and fmd driver in WinCE 4.2 two years ago. It works well until two weeks ago. NAND driver and FAT filesystem http://groups.google.com/group/microsoft.public.windowsce.platbuilder... Our customer found one bug. I can repeat the bug by following the below steps. 1. Prepare 70 files in the nand flash folder, size from 1 byte to 100KByte. 2. Cut/paste them to the RAM file system i.e \temp folder. 3. Compare the files with the original files and found that the data become all 0x00 in some of them. I tried to put the original files in the RAM file system i.e. \temp folder and cut/paste them to nand flash folder. The files are all ok. I tried to put the original files in the Nand Flash folder and cut/ paste them to another nand flash folder. The files are ok. I tried to put the original files in the RAM file system i.e. \temp folder and cut/paste them to another RAM files sytem folder i.e. \program files. The files are ok. If the nand flash is 512 page nand flash, it don't have the above bug. So you can only find the bug in 2K page Nand Flash. If the OS is WinCE 5.0, don't have this bug. The summary is that the bug only happened on WinCE 4.2 and 2Kpage Nand Flash. The bug is only happened when cut/paste from 2K sector size FAT file system to 512 sector size FAT file system. Any suggestion? Thanks and Regards Hong Feng Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98958
  - 4
    - How can I hide a partition of DOM card(CE5.0) Execuse me, I created two partitions on my DOM card, and my CE5.0 system image uses Hive-based registry, the registry files are placed in 1st partition automatically when windows CE start.Now, I want to hide only 1st partition in explorer: [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles] "AutoMount" = dword:1 "AutoPart" = dword:0 "AutoFormat" = dword:0 "MountFlags" = dword:2 "DefaultFileSystem" = "" "PartitionDriverName" = "mspartl" "Folder" = "å·²è£?å?¥ç??å?·" "ActivityEvent" = "PowerManager/ActivityTimer/SystemActivity" [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\HDProfile] "MountHidden"=dword:1 ; // added by ZHIZI on 2007-04-10 16:19 "Name" = "IDE Hard Disk Drive" "Folder" = "ç£?ç??" "Folder" = "å·²è£?å?¥ç??å?·" "MountAsBootable" = dword:1 Howewer, the 2 partitions can all be seen in explorer. In Windows CE 5.0 MSDN, I found that "MountHidden" Specifies a hidden file system, set to 1 to enable. But I don't know why it doesn't take effect. Help me, please. Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98957
  - 5
    - Data abort Exception after downloading OS Hi, I am working with Wince5.0 for s3c2440 evaluation board. I am getting the following exception after downloading OS with my own eboot. I downloaded using USB. Windows CE Kernel for ARM (Thumb Enabled) Built on Jun 24 2004 at 18:25:00 ProcessorType=0920 Revision=0 sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 82205f84 www.clabsys.com FCLK : 390000000, HCLK : 130000000, PCLK : 65000000 DCache: 8 sets, 64 ways, 32 line size, 16384 size ICache: 8 sets, 64 ways, 32 line size, 16384 size Sp=ffffc7cc OEMIoControl: Unsupported Code 0x10100b4 - device 0x0101 func 45 OEMIoControl: Unsupported Code 0x101008c - device 0x0101 func 35 OEMIoControl: Unsupported Code 0x10100d0 - device 0x0101 func 52 OEMIoControl: Unsupported Code 0x10100f8 - device 0x0101 func 62 DeviceFolder::LoadDevice!Enumerate Found deprecated load instructions at (Drivers\BuiltIn\AFD). Driver cannot be unloaded. DeviceFolder::LoadDevice!Enumerate Found deprecated load instructions at (Drivers\BuiltIn\PPP). Driver cannot be unloaded. OEMIoControl: Unsupported Code 0x10100fc - device 0x0101 func 63 Data Abort: Thread=83df7044 Proc=81526540 '' AKY=00000013 PC=802243b4(NK.EXE+0x000243b4) RA=0000003c(??? +0x0000003c) BVA=2af9fe98 FSR=00000005. Kindly help Warm regards Kirthika Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98953
  - 6
    - StartOneDriver RegisterDevice(... )failed here are some debug outputs from serial while my board is booting, could anyone help me to check why they are failed to be registered? Am I missing some feature what should be add to the platform? I'm using S3C2440 ..... 0x8fe9b2e4: DEVICE!ActivateDeviceEx(Drivers\BuiltIn\Audio) entered 0x8fe9b2e4: DEVICE!StartOneDriver RegisterDevice(WAV, 1, wavedev.dll, 0x602ee54) failed 0x8fe9b2e4: DEVICE!ActivateDeviceEx(Drivers\BuiltIn\NDIS) entered .... 0x8fe9b2e4: DEVICE!ActivateDeviceEx(Drivers\BuiltIn\PBUT2440) entered 0x8fe9b2e4: DEVICE!StartOneDriver RegisterDevice(DSK, 2, pwrbtn_pcf.dll, 0x602ee54) failed .... Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98950
  - 7
    - Poor performance of diskcache.dll? Hi all, My company makes a GPS platform based on WinCE 5.0 S3C2440. It has 64MB of NAND flash, which is more than enough to fit the mapping application. However, the map database is fairly large and requires a 1GB SD card. No problem. However, when the application runs, it slows to a crawl due to the excessively fragmented nature of the file accesses it implements. So, I decided to more carefully examine the caching possibilities of WinCE 5.0. The FATFS caching is handled by PRIVATE\WINCEOS\COREOS\STORAGE\DISKCACHE. After much tracing and message printing I noticed that diskcache's algorithm doesn't have any support for pre-fetching (reading some sectors in advance); so, for each 1-sector request comming from the upper layers, diskcache reads only 1 sector from the disk, if there is a cache miss, and stores only that sector in the buffers; no further read-ahead is done. I cloned and tweaked diskcache to implement a read-ahead of 64 sectors (minimum) and now the application starts beautifully with thousands of cache hits; it is about 10 times faster and actually usable. Am I missing something? Is there any simple configuration that enables the read-ahead feature? Here are my FATFS customized registry entries: [HKEY_LOCAL_MACHINE\System\StorageManager\FATFS] "FriendlyName"="FAT FileSystem" "Flags"=dword:00000064 "Util"="fatutil.dll" "CacheDll"="diskcache.dll" "BufferSize"=dword:40 "FatCacheSize"=dword:200 "DataCacheSize"=dword:800 "CacheSize"=dword:800 "DLL"="fatfsd.dll" "EnableCache"=dword:1 "EnableFatCacheWarm"=dword:0 "EnableDataCacheWarm"=dword:0 "EnableWriteBack"=dword:1 "Paging"=dword:1 [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash\FATFS] "FriendlyName"="FAT FileSystem" "Dll"="fatfsd.dll" "Flags"=dword:00280014 "Paging"=dword:1 "CacheSize"=dword:800 "EnableCacheWarm"=dword:0 "EnableCache"=dword:1 "MountFlags"=dword:2 "MountAsROM"=dword:0 "BufferSize"=dword:40 "FatCacheSize"=dword:800 "DataCacheSize"=dword:800 "EnableCache"=dword:1 Besides, if I decide to use my modified diskcache.dll, am I allowed to do that, since this is derived from the PRIVATE tree? Thanks! -H Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98948
  - 8
    - SQL Server 2005 Compact Edition I can't be the only one confused by SQL Server on mobile devices. I am trying to get the new SQL Server 2005 CE on my Windows CE 5.0 device. In Platform Builder I have SQL Mobile listed as a catalog item. That is what I'm using right now. It comes with .dll files that are dated for 9/2/2005 and version numbers of 3.00.5206.0. This has to be SQL Mobile 3.0. To me it looks like SQL Server 2005 CE has files dated 12/22/2006 and version numbers of 3.00.5300.0. I found this KB article on MSDN: http://support.microsoft.com/kb/918066 It says "A supported software update to resolve this issue is now available from Microsoft." Where is that update at? Are they talking about adding SQL Mobile to Platform Builder? Does anyone have any ideas? Thanks. Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98947
  - 9
    - Graphedt For Windows CE 5.0 Hi, Can i build Graphedt.exe as part of the Windows Ce Image? If yes how can it be done? Can it be added to the image using some Sysgen variable? I figured graphedt.lib as part of WinCE 5.0.Can we use this library to build Graphedt.exe? Or is there any other approch to build graphedt.exe as i need to test my filters. Thanks and regards Ajith Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98939
  - 10
    - Microsoft Direct Draw Hardware Abstract Layer (DDHAL) Specificatio Hello, all Although there are DDHAL reference informations in MSDN, I'd like to refer the original document. If you know where (web link) or how the original document of Microsoft Direct Draw Hardware Abstract Layer Specification can be got, please tell me. Thanks & regards. -gdj Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98938
  - 11
    - CE 5.0 Eboot and USB Host Hi All, I have two problem. Problem 1 ======== I am trying to download CEPC through an Ethernet connection (Eboot). But my NIC driver initializations are failing. I checked the same with two PC and the results are same. I have the following network cards. But these cards are not added in kitldrv.c file. so, 1) PC1 NIC card, Vendor ID 0x14E4, Dev ID 0x170C ( Broadcom made ) 2) PC2 NIC card, Vendor ID 0x8086, Dev ID 0x27DC ( INTEL Made ) Does any one know any patch or latest version which supports NIC from these Manufactures?. I am using WIN CE 5.0 Problem 2 ======= In MS-DOS mode, I loaded CEPC using loadcepc. I enabled the USB UHCI/ OCHI and EHCI support in the build and the registry entries are added. Also from the boot console, I could see UHCD logs like "UHCD: Installed ISR handler" etc. 1) But after booting, when I plug a USB device, there is no hardware pop-up ( or any kind of notification) for driver installation ( I added PnP Notifications during build, but don't know whether this is applicable) 2) How do I view the drivers and devices in a standalone CEPC. I mean "Device Manager" kind of stuff in CEPC. 3) What kind of diagnostic tools are used in CE for driver development. I mean outside remote PB tools, as I am not able to connect the PB to target CEPC. Thanks in advance Suja Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98937
  - 12
    - Image Binary Format I don't know how to explain the image holes in .bin or RAMIMAGE Please check out this record example Image Start = 0x00220000, length = 0x00B52D90 Record [ 0] : Start = 0x00220000, Length = 0x00000010, Chksum = 0x00000829 Record [ 1] : Start = 0x00220040, Length = 0x00000008, Chksum = 0x00000314 Record [ 2] : Start = 0x00221000, Length = 0x0003EFFC, Chksum = 0x019B93D5 Record [ 3] : Start = 0x00261000, Length = 0x000003A0, Chksum = 0x00014AD3 There are many unused spaces in RAM. For example, 0x220020~ 0x220040 0x220048~0x221000 Why do we leave these spaces? -- Jacky Ko Microsoft MVP for Windows Embedded www.advantech.com Advantech Co., Ltd Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98935
  - 13
    - ActivateDeviceEx() fails... Hi all, these days I have developed my first "Device-Driver" for CE-based devices. The "Device-Driver" is actually a quite simple DLL that exposes a stream-interface to clients. Clients can act upon the driver via CreateFile(), ReadFile(), WriteFile and DeviceIoControl(). The drivers purpose is simply to write Debug-Messages to a file. I have thoroughly tested the DLL-Entrypoints with a client in user-mode. I'm now tryin to load the driver via ActivateDeviceEx(). I have created a registry-key "Drivers\RZS_LogDrv" under HKEY_LOCAL_MACHINE which has the following values: Value-Type REG_SZ, Value-Name: DLL, Value "\Program Files\RZS_LogDrv\logdrv.dll"; (this is the path to my DLL"). Value-Type REG_SZ, Value-Name: Prefix, Value "RZS"; (this is the prefix used by the exported functions e.g. RZS_Init()). Value-Type REG_DWORD, Value-Name: Index, Value "0"; (this is the index used to form the device-name as in "RZS0:"). Value-Type REG_SZ, Value-Name: IClass, Value "{A4E7EDDA-E575-4252-9D6B-4195D48BB865}"; (this is the (predefined) GUID for the stream-driver interface). My call to ActivateDeviceEx looks like this: const TCHAR* pszRegPath = _T("Drivers\\RZS_LogDrv"); HANDLE hDevice = ActivateDeviceEx(pszRegPath, NULL, 0, NULL); The return value is always NULL and GetLastError() reports 1610 (ERROR_BAD_CONFIGURATION)! What did I wrong? Can somebody help me? Thanks in advance and best regards Reiner Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98930
  - 14
    - [WinCE 5.0] How-to disable idle modes... Hi everybody, I use PB 5.0 on a Phycore PXA-270 board with Adeneo's BSP... I try to disable all idle modes in my image because the system must stay awake every time. To do that, in "project.reg" I wrote : [-HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\Timeouts] [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power] "DisableGwesPowerOff"=dword:1 But after 15', my system go nonetheless into 'coma mode'... I verified that the registry contain the informations above. Do I forget something else ? Many thanks for your help. Olivier Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98913
  - 15
    - Loading a driver from other driver Part A: I have two stream interafce drivers driver_A and driver_B. Driver_B is dependent on driver_A and i want to load driver_B from driver_A. How can I achieve this ? Should I call LoadLibrary or ActivateDevice() from driver_A to load driver_B ? Is the XXX_Init function of driver_A the right place to call for loading driver_B? One more problem is driver_B once it gets loaded it will issue ioctls to driver_A? What is the best approach for this scenario? Part B: Driver_A will receive data from hardware and it needs to pass this data to driver_B Which is the best form of communication between drivers - events, message_queues,etc, considering performance as very critical ? Can I have more stream interface drivers over driver_B to form a hirearchial layering of drivers ? Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98911
  - 16
    - How to do Priority Assignment? Hi friends, I want to make serial communication(RS232) the most important task of CPU. I mean, any task other than serial communication(be it usb, printer, display, keyboard, mouse etc) should be done only after serial communication is done. What steps can I do to realize this? Any comment is greatly appreciated. Thanks.. Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98910
  - 17
    - location of CE's vector table Would someone kindly ask my following question ? Usually MPUs support low end (0x0000_0000) vector table location, but processors like some ARM processors support high end (0xFFFF_0000) vector table location as well. It was said that the high end vector table location is added for the requirement of OSs like CE. Must CE require this ? If a MPU core only supports low end vector table location, what would happen to run CE on it: CE can't work or there are some extra processing needed to do in CE so reducing its performance, etc. Thanks. Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98909
  - 18
    - sysgen error Hi there, I installed the wince5.0 and made a new project and then am trying to sysgen but I met an error below. please let me know what's the problem. Thanks in advance. Patrick ---------------------------from build.log--------------- Starting sysgen phase for project ( common ) Found localized resources for Languages ( 0404 0407 040C 0410 0411 0412 0413 0416 041D 0804 0C0A) Microsoft (R) Program Maintenance Utility Version Test Version Copyright (C) Microsoft Corporation. All rights reserved. NMAKE : fatal error U1065: invalid option '-' Windows CE Version (Release) (Built on Mar 1 2004 21:46:39) Stop. Microsoft (R) Program Maintenance Utility Version Test Version Copyright (C) Microsoft Corporation. All rights reserved. NMAKE : fatal error U1065: invalid option '-' Windows CE Version (Release) (Built on Mar 1 2004 21:46:39) Stop. Microsoft (R) Program Maintenance Utility Version Test Version Copyright (C) Microsoft Corporation. All rights reserved. NMAKE : fatal error U1065: invalid option '-' Windows CE Version (Release) (Built on Mar 1 2004 21:46:39) Stop. ---------------------------- Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98908
  - 19
    - Problem launching Device Emulator Hi All, I have installed wince 6.0 and I am trying to build and download the run time image for device emulator. I have followed the steps provided by msdn doc. to build and download the image for device emulator. I have successfully built the image, when I download the image after setting connectivity options as per the doc I get the following message in the dialog box. Failed to open VPC network driver. verify that the driver is installed and it specifies a link to download. Followed by this I get an exception in K.COREDLL.DLL(0xC000001C:Invalid System Service) Could anyone please help me with this. Thanks & Regards, Chitra Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98905
  - 20
    - Problem in displaying OS image in LCD Hi, I am working in wince5.0 for ln2440sbc.I added support in Eboot for downloading nk.nb0 through USB I downloaded Nk.nb0 through USB. I was able to get these messages but i didn't see any display in LCD of my OS image. For example files i was able to get images in LCD. ProcessorType=0920 Revision=0 sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 82205f84 www.clabsys.com FCLK : 390000000, HCLK : 130000000, PCLK : 65000000 DCache: 8 sets, 64 ways, 32 line size, 16384 size ICache: 8 sets, 64 ways, 32 line size, 16384 size Sp=ffffc7cc OEMIoControl: Unsupported Code 0x10100b4 - device 0x0101 func 45 OEMIoControl: Unsupported Code 0x101008c - device 0x0101 func 35 OEMIoControl: Unsupported Code 0x10100d0 - device 0x0101 func 52 OEMIoControl: Unsupported Code 0x10100f8 - device 0x0101 func 62 DeviceFolder::LoadDevice!Enumerate Found deprecated load instructions at (Drivers\BuiltIn\AFD). Driver cannot be unloaded. DeviceFolder::LoadDevice!Enumerate Found deprecated load instructions at (Drivers\BuiltIn\PPP). Driver cannot be unloaded. OEMIoControl: Unsupported Code 0x10100fc - device 0x0101 func 63 MSIM: IM_ReadRegistry read KB 5 Explorer(V2.0) taskbar thread started. NDISPWR:: Found adapter [CS89001] Any help will be useful for me. Regards Kirthika Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98904
  - 21
    - where is excetion vectors table placed at sdram ? Dear all, I know the exception vectors table is located at 0xffff0000 in wince. but 0xffff0000 is not mapped at sdram space(0x80000000-0xc0000000), it means vectors table is not located at sdram space? I'm confused about this, anyone can help me ? Cheers. Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98903
  - 22
    - Show "Chinese Font" in English OS image? Hi all: I build an English OS(WinCE50) image, and see the Chinese characters look like "=E2=96=A1=E2=96=A1=E2=96=A1"... The Chinese can't be shown correctly. Or I need to build a Chinese OS image??? But the OS image size is large ! Show "Chinese Font" in English OS image is possible? Please give me some suggestion or reference documents, Thanks a lot. Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98900
  - 23
    - Why GPIO1 cannot wake up pxa270? I use GPIO1 to wake up PXA270 from sleep mode.And GPIO0 is connected to CS8900A's INT pin.When getting into sleep mode,I cut off the power supply to cs8900a.So GPIO0 is pulled to low.When I push the key to make a falling edge to GPIO1.PWR_EN is enabled,but no program execute. If I do not cut off the power supply to cs8900a(GPIO0 is not pulled down).System is successfully waked up. Why?Who can help me? Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98898
  - 24
    - problem with display driver Hey i'm using the display driver for my NEC display(vrc4171). I get the driver from windows CE 3.0 and i want use it for windows CE 5.0. Now i've implement the driver but i get one problem. In the background of my display i get a lot vertical lines. i'm using 8 BPP and did already some test like writing a value directly to the framebuffer and here there's no problem. What can be the problem? Could it be a difference between Widows CE 3.0 and Windows CE 5.0 Tom Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98897
  - 25
    - Suspend/resume - exception on resume Hi all, I have posted this issue before ("Suspend/resume causes system halt" on 2/26/07) but now I have slightly better insight about what is happening, so I open it again here. It seems to be related to the presnce of an SD card (sdmemory.dll). I am using the debug version of kern.exe. If I suspend/resume rapidly with an SD card present, after a while I get the following error message: 0x8dfca400: NK Kernel: DEBUGCHK failed in file d:\macallan\private\winceos\coreos\nk\kernel\schedule.c at line 5065 0x8dfca400: DEBUG_BREAK @80062e58 MD=1f Ignored. NK Kernel: DEBUGCHK failed in file d:\macallan\private\winceos\coreos\nk\kernel\schedule.c at line 4931 RaiseException: Thread=8dfca400 Proc=8c226820 'device.exe' AKY=00000007 PC=03f9138c(coredll.dll+0x0002138c) RA=80061900(NK.EXE+0x00060900) BVA=00000000 FSR=00000002 Fixing this seems to be beyond my possibilities (bug in kernel?). I am using WinCE 5.0 with updates until February 2007. BSP is the SMDK2440A. Any idea is very welcome. Thanks! -H Tag: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? Tag: 98891

Hi, all

I want to convert a cec file for ce5.0 to the ctalog file pbcxml file
for ce6.0,
would you give me some details ? thanks

Top

Re: How to convert the cec file for ce5.0 to the pbcxml file for ce6.0? by Dean

Dean
Thu Apr 12 12:30:36 CDT 2007

Open it in the catalog editor, then save it. The conversion will happen
automatically.

--
Dean Ramsier - eMVP
BSQUARE Corporation

"David.H, Deng" <dhua_98@hotmail.com> wrote in message
news:%23hJsgQPfHHA.3564@TK2MSFTNGP06.phx.gbl...
> Hi, all
>
> I want to convert a cec file for ce5.0 to the ctalog file pbcxml file
> for ce6.0,
> would you give me some details ? thanks
>
>

Top