build query

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Attach emulator to Visual studio 2005 Hello, I cant attach my emulator from Platf. Builder with Visaul studio 2005. I have followed all the steps of the topic http://msdn2.microsoft.com/en-us/library/ms228708(vs.80).aspx but it still doesn't works. I launch the emulator with PB and I execute the ConmanClient2.exe and the MCaccept.exe and then I run Tools-> connect to device in the VS2005. but it fails ( after some time) and says "activesync is not instaled". I have configured the VS2005 Tools->Options->device with the IP of the emulator, I also have changed my PC IP address to be in the same network than the emulator ( I dont know if it's necessary).. but it doesn't work. I have also tried enabling and disabling KITL as I have read somewhere... I don't know what I'm doing wrong. The only thing I doubt is about the "target" combobox in the Platform builder, witch I have set to "CE device" ( if I set it to Windows CE 5.0 device when I try to attach it fails with: Warning: Debugger service map is set to none. If your image has debugging support it may not boot properly. Cannot access selected Device from service host. Debugger could not initialize connection. The Kernel Debugger is waiting to connect with target. The Kernel Debugger has been disconnected successfully. ) any idea? thank you very much and sorry for my english Tag: build query Tag: 101338
  - 2
    - catalog query hi all, This is srikanth. I am writing application to test USB driver in the wince 5.0 and I am using intel PXA27x platform (Mainstone II board). I am having very basic doubt in the wince: In the right side catalog items these are the main components: 1. BSP's 2. CORE O.S 3. DEVICE DRIVERS 4. PLATFORM MANAGER. In the BSP's/ INTEL PXA27x Dev Platform: ARMV4, there is a usb host is there, In the CORE O.S/Wince Devices, USB Host Support is there, and in the DEVICE DRIVERS, there is USB Host is there. What is the difference between these three USB Hosts? Any body having idea please differentiate clearly. If I want to test the USB Driver (Let suppose PEN Drive (usb Mass-storage device) by adding componets to the O.S design view. Which host I need to add to the o.s design. and at the same time for client driver: which componet I need to add to the o.s design. i.e I want to test usb driver by using the pen-driver by opening the pendrive and creating a files in that, or open a file in the pen-drive by using application program. I am not getting any icon or any indication in the desktop when I attatch a USB device(pen drive) to the usb port of the intel board. In our board touch screen is not working, only display we can able to see. In my application I used create file function. The code snippet is shown below: int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPTSTR lpCmdLine, int nCmdShow) { HANDLE hFile; hFile = CreateFile((LPCTSTR)"\\USB Disk", GENERIC_WRITE| GENERIC_READ, 0, 0, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL); if( hFile == INVALID_HANDLE_VALUE ) { DEBUGMSG(1, (L"File not Copied successfully*************")); } else { DEBUGMSG(1, (L"File Copied successfully*************")); } return 0; } The createfile was giving invalid handle, because of path was not correct. what path I need to mention in the createfile function. Any body who is having idea on this please reply me. Thanks and regards, srikanth Tag: build query Tag: 101337
  - 3
    - Wince Application is hanging Hi all, I am working with WINCE 5.0 and PXA 27X . I am running one application which will run some tests (like Audio play, SD and CF Card read/write,get wifi signal strength etc..like this so many tests are there) continuously. After the test is executed ,again it will start executing from first test. This should happen continuously. I am printing "started" before start of first test and "end" after last test. The application is running continuously fine for some duration (2 hrs)after that the application is hanging after displaying "end".(Task bar and application is hanging .It is not showing any exception in the hyper terminal or it is not giving any fatal application error) So i cant able to find what test is causing this problem. Because it is hanging after "end" .i am not getting any hint. Can anyone suggest What may be the problem ,how to debug this.Is there any wince tools are there to resolve this issue. Thanks in advance Tag: build query Tag: 101336
  - 4
    - Display problem using ddi_hflat.dll I am using a board that uses SH7760 processor with onboard epson S1D13806 controller for graphics display. I am successful in bringing up the NK.bin by modifying the ddi.c in the OAL to initialize the epson controller. I am able to see the Wince startup screen with start button and taskbar on the LCD display. To verify the working of the hflat driver, a sample application was executed at the OS startup. I have a problem, the display is refreshing abnormally from top to bottom. The LCD resolution is 640 * 480, 8BPP, 60Hz frequency. I saw the previous post on similar issues, but those are not helping me. The same settings are working perfectly on Vxworks. Is there anything related to FQCR settings in the OAL/STARTUP/Startup.src file that i need to make? any pointers on this would be greatly helpful. Tag: build query Tag: 101331
  - 5
    - wavedev2 driver - multiple channels and sw mixer I have an unusual audio setup! I have three stereo audio output channels (I2S) that I need to support from one CE 6 audio driver. I don't want to do any mixing or volume control of the signals, the "codec" will do that. One application will give me data at 8kHz which I will always need to upsample to 44.1kHz and pass onto the codec on a particular I2S pin. Another will supply 11.025kHz data which I again need to upsample to 44.1kHz and output always on a particular I2S pin. The third application will supply 44.1kHz data which I need to output on a third fixed I2S channel. I intend to support this by returning that my wavedev2 driver supports three output channels in response to the WODM_GETNUMDEVS message, then the application software can supply the correct device ID in calls to waveOutOpen. I have a couple of questions: 1) I understand that I can't use the swmixer because I have more than one output channel? So, I wanted to indicate that my driver can support 8kHz, 11.026kHz and 44.1kHz rates directly, then do the sample rate conversion inside my driver. However, it doesn't appear that I can indicate in a WAVEOUTCAPS that the driver can cope with 8kHz data - only 11.025, 22.05, or 44.1 looking at the defines in mmsystem.h Could I use the swmixer? I don't want it mixing any of the audio streams together, but maybe I could rely on it to do the upsampling? 2) Is there a better way of allowing application software which audio output channel to open when the driver supports several? Regards, Matthew Tag: build query Tag: 101323
  - 6
    - USB mouse Can I connect one USB mouse or any other device into (mini)USB of my Windows CE device and get its input by code? I only need to connect a simple (physical) on/off button into my Windows CE to input a start/stop when my application is running so that is can do something due to this input: any idea? Mhaxx Tag: build query Tag: 101319
  - 7
    - SYSGEN :****** B A T C H R E C U R S I O N exceeds STACK limits ****** Hi all, Do anybody know what this error is for ??? CEBUILD: Running sysgen preproc (for COMMON) Starting sysgen phase for project ( common ) ****** B A T C H R E C U R S I O N exceeds STACK limits ****** Recursion Count=1239, Stack Usage=90 percent ****** B A T C H PROCESSING IS A B O R T E D ****** PlatX_2430 - 0 error(s), 0 warning(s) ========== Build: 1 succeeded or up-to-date, 0 failed, 0 skipped ========== i am getting this error whenever I am trying to sysgen the platform (with all options i have tried out) I dont wanna re-install the platform builder so please if anybody knows it that will be great help to me. :) Thanks, Nagesh Tag: build query Tag: 101318
  - 8
    - bsp clone error Hi, when i try to clone mainstone bsp with ce 6 i get Could not find file 'C:\WINCE600\platform\MainTest\catalog\MainTest.pbcxml'. error. Thanks Tag: build query Tag: 101316
  - 9
    - *_NotInstalled.txt files after installing QFEs We (and our customers) are constantly having problems with QFEs not installing properly: Even when starting from a fresh PB 5.0 installaion and installing QFEs in the proper order, the '\WINCE500\Updates'-folder contains '*_NotInstalled.txt' files, that show that some files of some QFEs didn't get installed. At first we thought it was because the installation routine of such a QFE has found that the patches (or newer ones) to the respective files have already been installed, but we have seen cases where new files (for Net CF 2.0) should have been added, but just weren't installed at all. It seems to make a difference whether we install, e.g. the 2006 RollUp or the monthly 2006 QFEs (in order), whether 2004/2005-RollUps are installed or not, etc. Unfortunately the most obvious way of installation (PB5 -> RollUp2006 -> monthly 2007) does not necessarily result in the least '_NotInstalled'-files. The best result I was so far able to achieve is 'PB5 -> RollUp 2004 -> RollUp 2005 -> Monthly 2006 -> Monthly 2007' but even then 2007M01 and 2007M02 resulted in patches not getting installed (IP and WMT for 2007M01 and DirectX for 2007M02). What is going on here? This is really annoying, because each time one of our customers wants to use one of our BSPs it is a long-time trial-and-error phase until the customer has a QFE combination that works. Can anyone help? Tag: build query Tag: 101313
  - 10
    - Error in DebugVersion of wince5.0 Hi all, I am facing a problem with wince 5.0 debug version. I am using an imx31 board (arm v4i)and wince 5.0 bsp for ur project.I have a GPIO driver for which i need to trigger GPIO Interrupts externally.The IST part, i have implemented in a wince service.Now If i have more than one event(wait for multiple objects will have an array of 2 elements as a parameter), the control goes to D: \WINCE500\PRIVATE\WINCEOS\COREOS\NK\KERNEL\schedule.c..ie inside the function DWORD SC_WaitForMultiple( DWORD cObjects, CONST HANDLE *lphObjects, BOOL fWaitAll, DWORD dwTimeout ) and I am getting a DEBUGCHK Failed message. This is my code for waiting for the event to be signalled... DWORD dwStatus =WaitForMultipleObjects(numberOfEvents, g_hGpioEvent, FALSE, INFINITE); >From this point it goes to schedule.c and the system hangs. But if there is only one event it is working as expected. What would be the cause of this issue??? Earlier I have checked the working of my service(IST) ,by simulating events using an application(not using real external interrupts from arm processor).Then it was working fine for all events... Any help is appreciated.... Thanks in advance Sereena Tag: build query Tag: 101308
  - 11
    - Disable TouchCalibrate I am developing a CE5 device driver, what bothers me is that every time system boot up, a TouchCalibrate program will run automatically. Calibration must be done before desktop opens, spend quite much time. I searched reginit.ini, there is no entry for TouchCalibrate.exe, where does this program be loaded and how to disable it? Tag: build query Tag: 101304
  - 12
    - strataflash P30 and stratad.dll Hi, Does anyone know 100% if the stratad.dll driver supports Intel P30 flash? I am trying to debug it and everything looks fine until it tries to do buffered write and then I get the error messages you can see in the log below. Do I need to write my own flash driver? I found someone was having a similar problem, the last posting was in January but there was no reply to it. Please help. Thanks Anand 4294818162 PID:400002 TID:650002 Kernel DLL 'stratad.dll' needs thread creation/deletion notification 4294854535 PID:400002 TID:900002 FSDMGR!PNPThread: PNPThread starting! 398961 PID:400002 TID:650002 VerifySignatures: invalid block detected, calling FMD_EraseBlock 469004 PID:400002 TID:650002 STRATA Error: Block 0 locked ... Lower flash. 469004 PID:400002 TID:650002 STRATA Error: Block 0 locked ... Upper flash. 469004 PID:400002 TID:650002 FMD_EraseBlock: Unable to whack block signature 469004 PID:400002 TID:650002 VerifySignatures: error in FMD_EraseBlock, bailing 469004 PID:400002 TID:650002 ERROR: FMD_Init: Error while trying to verify block signatures. 469004 PID:400002 TID:650002 Unknown: DEBUGCHK failed in file C:\ymzki\private\winceos\DRIVERS\msflash\src\.\falmain.cpp at line 201 Tag: build query Tag: 101303
  - 13
    - Win CE QFE's Hi We are using a board from a 3rd party supplier who says that all QFE's must be installed prior to Aug 06...not really a problem as such, but I can only find QFE's for 2006, a yearly rollup for 2005 and there is a broken link in the WIndows CE home page to 2004 yearly rollup...my question is how far back do I need to go... I am currently using an Eval copy of Platform Builder...while I'm waiting for my real copy to arrive from the distributor. Has anyone had to anything similar ? Thanks Aidan Tag: build query Tag: 101301
  - 14
    - How to use platform builder to debug a NDIS driver on pocket pc device Hi, I'm trying to use the platform builder to debug a virtual NDIS miniport driver on a pocket pc device. This device has a USB connection to my dev machine. The device already has a CE run-time image from third party. All I'm doing is add a NDIS miniport driver. I wonder how I should set up the "Connectivity Options" without having to download the runtime image so that I can successfully attach to the device add start debugging? Thanks. Daniel Tag: build query Tag: 101296
  - 15
    - Allocating Internal Flash as Root I am sure this has been asked, but I can't for the life of me find the answer I am after. I am creating a new platform based on the MX21 ADS board. It comes with 64MB of flash. My device will power down completely and so I need to set up the file and object store as well as the registry so that it is all stored in the flash instead of RAM. The first thing I need to do is figure out how to configure my system in PB 5 to set aside half of the flash for a file system and then make it the root file system. I was reading the documentation and it seemed to indicate that what I want is the ROM only file system. I am still a little unclear because one place indicated that and another indicated that ROM only file system means there is no place to store stuff. The second thing is to make sure I have the registry settings right so that the hive based registry (which I also chose for my device) will point to the above mentioned flash area. I guess a third question is whether this is a good idea and better than using the RAM based system and doing some kind of backup to flash when the user powers down the unit. Thanks, Tony Tag: build query Tag: 101290
  - 16
    - flash FMD_EraseBlock hangs Hi, I am trying to add support for strata flash disk partition in CE6.0 a MainstoneIII BSP clone. In debug output it hangs after FMD_EraseBlock. I copy the debug output below. Any help will be greatly appreciated. Thanks a lot Igor ..... FSDMGR!STOREMGR_StartBootPhase BootPhase=0 (PrevBootPhase=-1) FSDMGR: File security disabled. FSDMGR!AutoLoadFileSystems: CurrentBootPhase=0, LoadFlags=1 FSDMGR!AutoLoadFileSystem: CurrentBootPhase=0, RootKey=System\StorageManager\AutoLoad, FileSystem_t=ObjectStore FILESYS: RAM File System FSD_MountDisk registering folder "Object Store" FSDMGR!MountTable_t::RegisterVolumeName: Registered "Object Store" at index 4 FSDMGR!MountTable_t::RegisterVolume: Registered volume at index 4 (Name="", MountFlags=0x46) FSDMGR!PNPThread: Using PNPUnloadDelay of 4096 FSDMGR!PNPThread: PNPThread starting! FSDMGR!AutoLoadFileSystem: CurrentBootPhase=0, RootKey=System\StorageManager\AutoLoad, FileSystem_t=MSFlash FSDMGR!AutoLoadBlockDevice: Auto-loading block driver from "Drivers\BuiltIn\StrataFMD" FSDMGR!MountStore: Attaching new storage device "MSFlash" OSAXST1: >>> Loading Module 'stratad.dll' (0x83F83708) at address 0xC0A30000-0xC0A51000 in Process 'NK.EXE' (0x80109AA0) OSAXST1: >>> Loading Module 'k.ceddk.dll' (0x83F83840) at address 0xC05E0000-0xC05EE000 in Process 'NK.EXE' (0x80109AA0) Kernel DLL 'stratad.dll' needs thread creation/deletion notification VerifySignatures: invalid block detected, calling FMD_EraseBlock Tag: build query Tag: 101286
  - 17
    - code page at load time Hello, I have file system drivers, that are loaded during system start. These drivers need to convert a WSTR to an ANSI string using WideCharToMultiByte during startup. This function fails in the first driver and succeeds at the second. With Platform Builder I could see that during the first call the code page was not valid yet. (Inside WideCharToMultiByte the function NormalPageFromPage returns 0.) When are codepages initialized? How can I make sure, that this API is ready? Best regards, Helge -- Time is an ocean but it ends at the shore Tag: build query Tag: 101284
  - 18
    - Indic support I am trying to add indic support(marathi, mangal font) with a DOTNET framework based application on WinCE5.0. It is observed that on addition of the complex sripting support the application paints very slowly. Let's say for a keyboard to be displayed paints the screen line by line When the complex scripting support is removed, the same application works fine. I have added the following catalog items in the image: SYSGEN_FONTS_MANGAL SYSGEN_KBD_MARATHI we are using PXA270 312 MHZ processor with mainstoneii BSP. could some one help me ascertain the cause and solution for the same?? Thanks and Regards, Ann Tag: build query Tag: 101277
  - 19
    - Concepts for saving PB Workspaces Hello there, at the moment I am thinking about saving the different versions (development stages) of a workspace I have. The problems to consider are the following: 1) Different images/workspaces with different catalog items (so v1.1 could have two items more then my v1.0, according to customer wishes) 2) The same platform in a newer workspace (same BSP), but slightly different hardware design (e.g. different bus addresses), which means that the sources of the platform must be changed. Of course I have to go back to my prior platform soures, when I go back to a prior workspace-version. 3) Changes in 3rd party drivers. All these things are of course in different folders, normally in wince500\PBWorkspaces\myWorkspace wince500\Platform\myPlatform wince500\3rdParty\mySpecialDriver The simpliest (and most brutal) way would be to put these folders into a ZIP-archive and call it "MyImageV1.zip". If I make major changes and want to preserve the old version I make a new ZIP-archive called "MyImageV1.1.zip" and so on. So I could always step back. Another way would be a tool like CVS or Subversion or similar. This would be smarter, but the trouble here is the fact, that the things to save are stored in very different folders, and there are a lot of other things on the same folder levels, which need not be saved. At the moment I would prefer the second option, maybe someone has another idea or even experiences? Greetings, Eike Tag: build query Tag: 101276
  - 20
    - Cleanworkspace.bat for CE 6 I am a big fan of the Steve's CleanBSP and CleanWorkspace batch files for CE 5. They scrub the directories so whats left is the minimum needed for source control archiving. I would like to see these updated for CE 6.0. I am assuming CleanBSP is good as is ??? Cleanworkspace should probably: 1) Renamed to CleanOSDesign 2) remove sdk stuff Can you also safely delete the xxx.pbxml.user file? How about the __CEBASE_FEATURES.txt file? I also have a "target" directory under the OAK directory which looks to be some subproject stuff .. can this be blown away. Is there anything else I missed? Tag: build query Tag: 101272
  - 21
    - GWES exception in RELEASE build but fine in DEBUG build after run a fixed time! In my RS485-serial driver, I meet a problem that when run a fixed time(run the test application called the 485-driver about 3 hours) in the RELEASE build enviroment, there is a exception raised like below: --------------------------------------------------------------------------------------------------------- RaiseException: Thread=8b9ec540 Proc=89b17390 'gwes.exe' AKY=00000049 PC=00000000(???+0x00000000) RA=882479c8(NK.EXE +0x000479c8) BVA=00000003 FSR=00000003 Exception 'RaiseException' Thread=8b9ec540 AKY=00000049 PC=88205af4 BVA=00000003 R0=00000000 R1=89b195a0 R2=00000017 R3=00000017 R4=89b16d88 R5=00000001 R6=00000cfd R7=00000190 R8=00000cfd R9=00000000 R10=ffffc764 R11=882479c8 R12=88212080 SP=00000000 Lr=ffffffff Psr=6000009f Halting system --------------------------------------------------------------------------------------------------------- But the same code and the same OS design under DEBUG build will not happen(I run the same test application called the 485-driver about 13 hours). The test application has verified with no memory leak. Does anybody meet this issue before?? Thanks in advance! Tag: build query Tag: 101260
  - 22
    - Intel StrataFlash problem Hi All, I am trying to use the unused upper portion of my flash chip as a disk device to store files. I am using WinCE6.0, MainstoneIII BSP clone. I am posting below the related debug output and my registry settings. Now I am getting error 126 all the time which means "module not found" I think. I checked that stratad.dll module is there. Thanks Igor ... FSDMGR!DllMain: DLL_PROCESS_ATTACH FileSystem Starting - starting with clean file system FSDMGR!STOREMGR_Initialize FSDMGR!InitializeStoreAPI FSDMGR!MountTable_t::RegisterVolumeName: Registered "StoreMgr" at index 2 FSDMGR!MountTable_t::RegisterVolume: Registered volume at index 2 (Name="StoreMgr", MountFlags=0x1) FSDMGR!InitializeROMFileSystem: File System=ROM OSAXST1: >>> Loading Module 'romfsd.dll' (0x83F8C000) at address 0xC0270000-0xC0277000 in Process 'NK.EXE' (0x80109AA0) FSDMGR!MountTable_t::RegisterVolumeName: Registered "ROM" at index 3 FSDMGR!MountTable_t::RegisterVolume: Registered volume at index 3 (Name="ROM", MountFlags=0x71) Succeeded on CheckFileRestoreFile(0x00840003) called fDelete = TRUE FSDMGR!STOREMGR_StartBootPhase BootPhase=0 (PrevBootPhase=-1) FSDMGR: File security disabled. FSDMGR!AutoLoadFileSystems: CurrentBootPhase=0, LoadFlags=1 FSDMGR!AutoLoadFileSystem: CurrentBootPhase=0, RootKey=System\StorageManager\AutoLoad, FileSystem_t=ObjectStore FILESYS: RAM File System FSD_MountDisk registering folder "Object Store" FSDMGR!MountTable_t::RegisterVolumeName: Registered "Object Store" at index 4 FSDMGR!MountTable_t::RegisterVolume: Registered volume at index 4 (Name="", MountFlags=0x46) FSDMGR!PNPThread: Using PNPUnload Delay of 4096 FSDMGR!PNPThread: PNPThread starting! FSDMGR!AutoLoadFileSystem: CurrentBootPhase=0, RootKey=System\StorageManager\AutoLoad, FileSystem_t=MSFlash FSDMGR!AutoLoadBlockDevice: Auto-loading block driver from "Drivers\BuiltIn\StrataFMD" FSDMGR!MountStore: Attaching new storage device "MSFlash" FSDMGR!MountStore: Failed mounting store "MSFlash"; error=126 FSDMGR!StoreDisk_t::~StoreDisk_t: deleting store (D0042650) FSDMGR!AutoLoadFileSystems: Unable to auto-load HKLM\System\StorageManager\AutoLoad\MSFlash; error=126 FSDMGR!STOREMGR_StartBootPhase BootPhase=1 (PrevBootPhase=0) FSDMGR!AutoLoadFileSystems: CurrentBootPhase=1, LoadFlags=1 FSVOL: Using system database volume "\Documents and Settings\default.vol" BuildPath: Documents and Settings OEM: Not cleaning system hive FSVOL: Creating new volume (size=28672 bytes) FSVOL: Initializing volume heap FSREG: Unable to read value "RequireCertMod" under HKEY_LOCAL_MACHINE\init\BootVars FSREG: Unable to read value "NoDefaultUser" under HKEY_LOCAL_MACHINE\init\BootVars FSREG: Logging in default user. FSREG: Unable to read value "DefaultUser" under HKEY_LOCAL_MACHINE\init\BootVars ... -------------------------------------------------------------------------- [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\StrataFMD] "Key"="Drivers\\BuiltIn\\StrataFMD" "Flags"=dword:4 "MemLen"=dword:02800000 "MemBase"=dword:9c180000 "Order"=dword:0 "FriendlyName"="MSFLASH Driver" "IsPairedFlash"=dword:1 "WriteBufferSize"=dword:40 "BlockSize"=dword:40000 "IClass"="{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" "Profile"="MSFlash" "Prefix"="DSK" "Ioctl"=dword:4 "Dll"="stratad.dll" [HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\MSFlash] "DriverPath"="Drivers\\BuiltIn\\StrataFMD" ; LoadFlags 0x01 == load synchronously "LoadFlags"=dword:1 "Order"=dword:0 "BootPhase"=dword:0 [HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\Relfsd] "BootPhase"=dword:2 "MountFlags"=dword:1 [HKEY_LOCAL_MACHINE\System\StorageManager\FATFS] "Flags"=dword:48 "Util"="fatutil.dll" "CacheDll"="diskcache.dll" "CacheSize"=dword:0 "EnableCache"=dword:1 "Paging"=dword:1 "Dll"="exfat.dll" "DisableAutoFormat"=dword:0 "DisableAutoScan"=dword:1 "FormatExfat"=dword:1 "FriendlyName"="exFAT FileSystem" [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles] "Folder"="Mounted Volume" "PartitionDriverName"="MSPART" "DefaultFileSystem"="" "MountFlags"=dword:0 "AutoFormat"=dword:1 "AutoPart"=dword:1 "AutoMount"=dword:1 ; Support XIP in IMGFS [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash\IMGFS] "XIP"=dword:0 "MountAsROM"=dword:1 "MountAsHidden"=dword:0 [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash] "MountPermanent"=dword:1 "Folder"="NOR Flash" "Name"="MSFLASH for STRATAFLASH" "MountHidden"=dword:0 "MountAsROM"=dword:0 "PartitionDriver"="mspart.dll" [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash\FATFS] "MountAsROM"=dword:0 "MountHidden"=dword:0 Tag: build query Tag: 101258
  - 23
    - What is the right way to specify coredll.lib ?? for CE 6.0 drivers I see coredll called out two different ways in the sources file. What is the "correct" way"? 1: TARGETLIBS= \ $(_COMMONSDKROOT)\lib\$(_CPUINDPATH)\coredll.lib 2: TARGETLIBS=\ $(_SYSGENSDKROOT)\lib\$(_CPUINDPATH)\coredll.lib Does ether one have an advantage over the other? Tag: build query Tag: 101240
  - 24
    - Synchronization with kernel thread Hello, I need to run a thread in the WinCE 5.0 OAL. The thread is necessary for synchronizing some operations with several (client) threads. The client thread will enque a request and set an event to make the kernel thread do the work. Therefore I created an event and a thread. The thread function should wait for event, reset it, do the work and wait again. Unfortunately SC_:WaitForMultiple returns WAIT_OBJECT_0 immediately, even if the event has not been set. The event and thread creation is done in context of filesys.exe when the OEM registry is flashed the first time. _WriteRegistryToOEM() { s_hWaitForStart = SC_CreateEvent(NULL, TRUE, FALSE, NULL); hThread = CreateKernelThread(WorkerThread, NULL, 251, 0); } WorkerThread() { while (TRUE) { dwWaitResult = ::SC_WaitForMultiple (1, &s_hWaitForStart, FALSE, INFINITE); ::SC_EventModify(s_hWaitForStart, EVENT_RESET); // do work } } So the synchronization does not work at all, because SC_WaitForMultiple never waits. How can I achieve the synchronization? Best regards, Helge -- Time is an ocean but it ends at the shore Tag: build query Tag: 101236
  - 25
    - Can the serial driver and OEMWriteDebugByte work concurrently? If I use the serial driver to modify the stopbit, it will disconnet KITL. I guess that this is casued by that the serial driver is working when KITL is printing message with OEMWriteDebugByte concurrently. It seems not reasonable that OEMWriteDebugByte can work together with serial driver. But why does the KITL still call OEMWriteDebugByte to print debug message? Please give me some suggestion about this issue. Best regards, Tag: build query Tag: 101233
- Next
  - 1
    - USB Host Virtual Serial Drivers CE6 ?? Has anyone been able to get Virtual serial USB Host drivers, particularly the CE 6 ones. FTDI have a driver for CE4.2 to CE5. FTDI say that the driver won't work with CE6, which I haven't tried, and wouldn't expect to work. I have a device built around the FTDI hw so am keen to get a CE6 driver. Tag: build query Tag: 101228
  - 2
    - Write file from http-webserver Hi I have a windows ce device with the http-webserver. I am trying to write a xml-file, or just a txt-file, from an ASP-website. But I cannot figure out how. Somebody got some experience on that? What I tried till now: 1=2E <%@ LANGUAGE =3D "VBSCRIPT"%> <% Dim FSO Dim objStream Set FSO =3D CreateObject("Scripting.FileSystemObject") ... %> Gives me this error: Microsoft VBScript runtime error: '800a01ad' Description: ActiveX component can't create object: 'Scripting.FileSystemObject' 2=2E <script language=3D"JScript">  </script> Gives me the error, that I don=B4t have permissions to write... How can I get permissions or a way to write files on the server-side? Thanks in advance Tag: build query Tag: 101225
  - 3
    - WINCE Idle state Hi Team, We are Implementing power management through Wince for pxa27x. In this, We need to put the processor into idle, standby and sleep mode. We are trying to map user idle <--> Idle, system Idle<-->standby and Suspend <--> sleep. here, my suspend is working properly(it is using OEMpoweroff) but i m a bit confused the regarding IDLE. Which function should be called for the User Idle and System Idle. Can any one make me clear which function(i mean kernel function or OEM function) should be called for user idle and kernel Idle. Thanks and Regards, Ranjit Ranjan EggHeadCafe.com - .NET Developer Portal of Choice http://www.eggheadcafe.com Tag: build query Tag: 101224
  - 4
    - UDP Send issue I'm using GPRS connection to send UDP data to a pc. I will also be sending data from the PC to my wince device thro' GPRS. Situation 1: When I try to send data(72 bytes) immediately after my startup routine(say after creating socket), 'send' function says success but the PC has not received anything. But when I send after receiving some data from the PC, my device is transmitting 72 bytes. Situation 2: When I try to send lesser number of bytes(say 35 bytes) immediately after startup routine, wince device is transmitting properly and the PC is also receiving it. I'm able to send lesser no. of bytes immediately after startup. If I have to transmit more number of bytes(72) I have to wait till I receive bytes from the other end. I'm pasting the code that creates my socket. I'm not able to read the buffer size using getsockopt. It says WSAENOPROTOOPT. (code is under #if 0 below) Any advice guys. bool SL_GSM_Create_Client_Socket(void) { WSADATA wsaData; DWORD dwNonBlock=1; int iResult; byte bData = 1; if(boIsWS2DllLoaded == false) { iResult = WSAStartup( MAKEWORD( 2, 2 ), &wsaData ); if ( iResult != NO_ERROR ) { return FALSE; } else { if ( LOBYTE( wsaData.wVersion ) != 2 || HIBYTE( wsaData.wVersion ) != 2 ) { WSACleanup( ); boIsWS2DllLoaded = false; return FALSE; } else boIsWS2DllLoaded = TRUE; } } /* Create a socket*/ GSMsocket = socket( AF_INET, SOCK_DGRAM, IPPROTO_UDP ); if ( GSMsocket == INVALID_SOCKET ) { return false; } /* Connect to a server. Get the Server IP address from the Sys control module*/ sClientService.sin_family = AF_INET; sClientService.sin_addr.s_addr = inet_addr(cServer_IP_Address); // 10.251.106.101 sClientService.sin_port = htons(3003); if ( connect( GSMsocket, (SOCKADDR*) &sClientService, sizeof(sClientService) ) == SOCKET_ERROR) { switch(WSAGetLastError()) { case WSAECONNREFUSED: { printf("WSAECONN refused"); break; } case WSAENETUNREACH: { printf("WSAENETUN reach"); break; } case WSAETIMEDOUT: { printf("WSAENETUN Time out"); break; } case WSAEWOULDBLOCK: { printf("\nNon Blocking socket\n"); break; } } closesocket(GSMsocket); return false; } /* To make the socket Non-Blocking*/ if(ioctlsocket(GSMsocket,FIONBIO,&dwNonBlock) != 0) { printf( "Error in creating Non Blocking socket: %d \n", WSAGetLastError() ); } GSMinitialised = true; #if 0 // This does not work. Gives an error code 10042 - WSAENOPROTOOPT { char * optval[10]; int i=10, retcode=0; int * optlen=&i; retcode=getsockopt (GSMsocket, SOL_SOCKET , SO_MAX_MSG_SIZE, (char *)optval, optlen); if(!retcode) printf("\nSO_MAX_MSG_SIZE=%lu",*((unsigned long *)optval)); else { retcode = WSAGetLastError(); printf("\noptval ERROR %d", retcode); } } #endif return true; } Tag: build query Tag: 101215
  - 5
    - Regarding Frame Buffer of the LCD WinCE 5.0 Hello, LCD driver has mameory mapped VRAM Frame buffer. Now if access this buffer and trying to blit directly using this frame buffer pointer, its taking too much time in comparison to the local buffer copying. there is around 50% more cpu utilization then our local buffer copying. and the time taken for blitting in the frame buffer i.e. VRAM is around 40ms more. Anyone know about this strange behaviour. Thanks PS : Already tried memcpy also but memcpy also taking too much time for VRAM. Tag: build query Tag: 101211
  - 6
    - ip address set in wince 5.0 network driver are able to register successfully and ipconfig can show it's information Ethernet adapter Local Area Connection: IP Address ........ : 0.0.0.0 Subnet Mask ....... : 0.0.0.0 Adapter Name ...... : WB910 Description ....... : WB910 Adapter Index ..... : 2 Address............ : 00 00 01 24 00 03 DHCP Enabled....... : YES DHCP Server........ : Primary WinsServer : Secondary WinsServer: Lease obtained on : Saturday, February 6 ,2106 22 : 28 : 15 Lease expires on : Saturday, July 2 ,2044 1 : 25 : 51 AutoConfig Enabled : YES Host name.......... : WindowsCE Domain Name........ : NODETYPE........... : 8 Routing Enabled.... : YES Proxy Enabled...... : NO but in control panel,after i use network user interface to set ip address and subnet mask, ipconfig continues to report 0.0.0.0 please help me regards Tag: build query Tag: 101210
  - 7
    - Scheduling in wince Hi, I am using a board based on imx31. When I play a movie, and at the same time if I use the pointing device on the board, the system becomes so slow that the movie clips breaks while playing. I am not sure if it is the problem of the pointing device. The pointing device is similar to a mouse( a device mounted on the board) is based on i2c. There is no interrupts for this device and I need to poll it every 25ms to read data(the pointer coordinates). Basically I have a while loop as below, while(1) { readi2c(&packet); processi2cpacket(&packet); sleep(25); } processi2cpacket(packet) { if(packet == <not valid>) return; else processpacketandlocateXY(); } Initially when the board is booted up and and without touching the pointer device if I play the movie, the movie plays fine. The moment I touch the pointing device, the processpacketandlocateXY() is called and the system slows down and the the movie starts breaking. Is there a better way to deal with this situation in Wince so that the function processpacketandlocateXY() can be scheduled in such a way that the system does not slow down so much. Thanks in advance.. Thanks, Shiju Tag: build query Tag: 101207
  - 8
    - active sync partnership & date time hi everyone. i have one question. my os image base is windows ce 5.0. default timezone is (GMT+02:00) Helsinki, Kyiv, Riga, ... automatically adjust clock for daylight saving value set TRUE;(set to registry) after cold reset status : 2007-January-12:00:01 PM. then i try connect activesync partnership. finished the partner ship. my device date time is change to automatically -> 2007:january:3 10:10:10 PM.(fail) but my PC date time value is 2007:january:3-09:10:10 PM.(desktop) this is my problem. my device time value is bigger than my PC(desktop) 1 hour. i have a one more strange situation. after that case(differ 1 hour). i try break partnership and try again partner ship. my device date time is change to automatically -> 2007:january:3 09:10:10 PM.(same to desktop) i'm not understand that case. plz...advice to me.^^; - aaplks@hotmail - aplkswin@gmail.com Tag: build query Tag: 101206
  - 9
    - MFC component missing from CE 6 catalog? It seems the MFC component is missing from the CE 6.0 catalog. I did a search for SYSGEN_MFC from the top of the catalog tree with no results. Is there a way to add it manually? Also missing is A2DP Bluetooth profile and platman is in there and it should not be??? Do they have a QA dept? Tag: build query Tag: 101200
  - 10
    - project query hi, I am creating an wince application in the wince 5.0. I selected static library while creating new project in the platform builder. after building that project and sygening the workspace. This project was not appearing in the run programs option which is there in the target menu bar. I want to run that project in the emulatex86. please suggest in this aspect how to proceed for this. waiting for your early reply. srikanth. Tag: build query Tag: 101199
  - 11
    - build query hi, I am writing applicatio on top of bluetooth stack in wince 5.0. wince 5.0 provided some samples in the path :: C:\WINCE500\PUBLIC\COMMON\OAK\DRIVERS\BLUETOOTH\SAMPLE These are there in the public folder, I created new workspace in that I added bluetooth components for transport and profiles. If I want make use of samples given by wince, what I need to do. In the platform builder those are showin as "excluded from build"( in the file view) How I can make use, those will become part of my image. If I build that it is giving error. If I build "btecho" It giving following errors:: BUILD: [01:0000000031:ERRORE] NMAKE : U1073: don't know how to make 'C:\WINCE500\public\common\oak\lib\x86\debug\l2capapi.lib' BUILD: [01:0000000033:ERRORE] NMAKE.EXE -i -c BUILDMSG=Stop. LINKONLY=1 NOPASS0=1 failed - rc = 2 Kindly help me in this aspect. waiting for your early reply.......... srikanth Tag: build query Tag: 101196
  - 12
    - Opening CEPlayer in full screen Hi all, I am developing an appliacation in WINCE 6.0 which will launch the ceplayer.exe with the media file as a command line argument. What i need is ceplayer.exe should run in fullscreen by default without manually selecting the view->fullscreen?? Is there a possibility??? Please help... Advanced Thanks, Prabu Kumar.K Tag: build query Tag: 101188
  - 13
    - ole32.def : error LNK2001: unresolved external symbol CoCreateGuid I had my platform building just fine. I then wanted to add MFC support and Standard SDK support. I right clicked on those 2 items in the catalog (one at a time) and added them to my platform. Now when I build I suddenly get: ole32.def : error LNK2001: unresolved external symbol CoCreateGuid I seem to understand that when you make changes to the platform layout you are supposed to do a SYSGEN from the build menu. That is what I did and got that error. Am I supposed to do a clean before build or a build and sysgen or what? Tag: build query Tag: 101178
  - 14
    - Shell Customization doesn't work like help says I am following the help article in the PB 5 local help titled "How to Customize the Shell" Step 6 gives a couple of small examples of things you can do. I tried a couple of them with mixed results. The first one I did was to change the value of m_fShowDesktopButton to be FALSE. It was already FALSE in one place and then TRUE in another. This is in the TaskBar project mentioned in the article. I also changed the background color to red (they used another color, but I used the same format). The results are that the desktop icon is still on the task bar and that the background is white and not repainting at all except for the bitmap itself. I would also like to know if I make changes to the shell like this which type of build do I need to do? Sysgen, Build and Sysgen or Build and Sysgen current BSP? Tag: build query Tag: 101169
  - 15
    - omap 2430 nand/nor boot Hi I have been working on OMAP 2430 SDP BSP support. For sometime I have been trying to port the boot loader image in NAND and try to get it execute but I haven't been successful in the same. Just have some basic doubts on flashing of images through NAND/NOR :- 1. I tried creating a small image in which I do some hardware initialization and make something print on LCD and throw some characters on HyperTerminal. I tried executing the same in NOR and it executed successfully because NOR is of XIP type but when I had reset my board the image did not executed successfully. I have given SRAM addresses as execution address. This means that NOR code is not being relocated automatically to the different location by boot ROM code and its not executing at the NOR location also. While as per my documents study, it's clear that after reset the code is relocated from NOR to different location for execution . But why is this not happening automatically in my case. 2. When I tried the downloading the same above image (converted into .ift) in NAND flash , the code id not executed itself. I have given SRAM addresses as execution address. I also heard that NAND flash also has some XIP region. The logic is clear that NAND and (NOR image after reset) is not executing until and unless you have copy code to relocate it to SRAM or SDRAM( if SDRAM has already been initialized prior to relocation). Kindly tell me that is my above understanding true or Boot ROM code does copy some part of code because even if we have copy section within the code, it needs to be executed before the copy actually takes place. I created these images by means of Windows CE only and booted .bin file into NOR and .ift file in NAND. And the execution address of SRAM was defined by means of bib files entry of SRAM(internal) - 0x40204000. Also kindly tell me that is it possible to directly run the boot loader from SDRAM. What is the harm other than I have to port boot loader ebvery time before NKbin Thanks & Regards Aman Tag: build query Tag: 101165
  - 16
    - Build options check boxes GONE all of a sudden all the CE PB 6.0 build options check boxes are gone. Has anyone seen this? Tag: build query Tag: 101160
  - 17
    - project.reg not replacing platform.reg entries I added the following to my project.reg: [HKEY_LOCAL_MACHINE\SYSTEM\GDI\ROTATION] "Angle"=dword:5A ;; 90 degrees rotated clockwise I want my device to start out at landscape. I did a build and sysgen and this entry is in my project.reg in my release folder. When I run the image, however, the device still starts protrait. I use remote registry editor and sure enough the value is still 0. I also tried this: [HKEY_LOCAL_MACHINE\SYSTEM\GDI\ROTATION] "Angle"=- "Angle"=dword:5A ;; 90 degrees rotated clockwise In case it needed to remove the entry added by platform.reg, but that didn't work either. If I modify the platform.reg file, then everything works as I want. Can someone explain this to me and how to fix it? I don't want to modify my platform.reg for something that is specific to this project. Tag: build query Tag: 101150
  - 18
    - Embedded Fusion Windows CE DVD Hi, I just received my DVD course from Embedded Fusion and it looks great! I have one question about installation of software since I already have Platform Builder 5.0 installed and in use on a couple of projects. The docs keep saying that the CE Utilities for VS 2003 must be installed BEFORE PB. Since I already have PB and VS 2003 & 2005 installed does anyone know if there a procedure I can use to install the Add-in for 2003 without having to uninstall PB (and the QFEs!) first? Also, could I use VS 2005? Does it need an add-in? If so can I install it now without uninstallation of PB? Thanks, Sid. Tag: build query Tag: 101135
  - 19
    - Turnoff Backlight Hi all, I wanted to turn off the display after clicking "suspend", I tried with changing some registry values, no use. Can any one tell me the exact registry entry? I am using X-86 VGA Linear Frame display, Wince 6.0. I am not sure whether this can be done by altering the registry value or to change the display driver to support this? Regards, Sankarraj Tag: build query Tag: 101134
  - 20
    - Does windows mobile crossbow support DUN? Hi all, Does windows mobile crossbow support DUN? My platform is windows mobile 6.0 with AKU0.2 plus QUALCOM msm7200 BSP. None of my two PDAs can find the DUN ability of my device. I ever relialized DUN in windows mobile 5.0 with AKU 3.0 plus Intel monahans BSP. If crossbow supports DUN,what do i need to do to realize DUN? I also dont know the meaning of two registry item [HKEY_LOCAL_MACHINE\ExtModems\bluetooth_dun] and [HKEY_LOCAL_MACHINE\ExtModems\bluetooth_dun] . Can you help me? Thanks a lot! Best regards! -- dean chen Tag: build query Tag: 101132
  - 21
    - Power Management in Windows CE Hi, This is pertaining to the power state transitions and their implementation on the Intel PXA 27x board. The task that I need to achieve is to put the board in DEEP IDLE / STANDBY mode when a User Idle occurs. (Currently, the board goes into an IDLE mode when a User Idle occurs). Before starting off with this, I would like to ensure that my understanding of the power management is correct. According to my understanding, the way the kernel / power manager / device drivers work is a follows: The kernel: 1. The kernel calls the OEMIdle when there are no threads to be run. (Note: The kernel immediately calls OEMIdle the moment it finds that there are "no threads running "and NOT when there are "no threads running for a designated period of time"). 2. The kernel has no idea about the specific idle states like the User Idle, System Idle etc. All it (the kernel) does is to call the OEMIdle. And to the kernel, all idle states correspond to a call to the OEMIdle. The Power Manager: 1. The power manager decides whether the system needs to be put into User Idle/System Idle based on the event notification it receives from the Kernel and passes the notifications to the various device drivers which have registered with the power manager. 2. The Power Manager queries various sources to obtain the values for the various idle times and makes intelligent decisions like Notifying about User idle/System. For ex. If the user idle is set to 3c in the registry, then, after 60 seconds, the Power Manager might send the system into a user idle mode. Device Drivers: 1. The device drivers receive power notifications from the Power Managers and then decide what has to be done based on the notification. For ex. If the power manager notifies a D0 or a D1 to the display driver, the display driver might not wish to do anything but if it receives a D3 notification it might want to turn off. - Am I right in my understanding? - Is there any way that the power manager notifies the kernel/oal about a transition in the power state? Thanks in advance Treadstone Tag: build query Tag: 101131
  - 22
    - Open file failure in Release directory! Dear all, I have built new OS design. Only six catalog items (DirectShow core and display, Windows Media Player and OCX, wave file parser, waveform audio renderer) are selected in its Media catalog. The OS can be built successfully. The WMP can open *.wav file and play it successfully. After doing the test, the "WMA and MP3 Local Playback" catalog item is selected. Of course, its depency item will be selected automatically. Then, the OS is rebuilt successfully. However, when executing the WMP in the image (device emulator), it can not find the file with the error message like "Cant not open \Release\love.mp3. Please verify that the path and filename are correct and try again. (0x8004022f)". The VS 2005 shows the debug message with "Error checking wave format: 32 unsupported wave format". Do anything miss? PS. When building new project by wizard, the Windows Media Auiod/MP3 is selected by default. If using this method, the WMP can work well. Any suggestions are appreciated Best Regards Tag: build query Tag: 101127
  - 23
    - Problems with RELFSD/KITL on MainstoneIII BSP We have developed a BSP based on the MainstoneII reference, and have been using it fine for a couple of years now. We decided to convert it to be based on the MainstoneIII, (we wanted the power management CPU idle and variable tick timer). Now if we have an image without KITL in it, it all boots fine, however if we include Kitl it all starts to boot and we get debug messages via Kitl, until it tries to load the RELFSD component (mount the release directory) at which point it hangs waiting for a response from the desktop PC. (In fact the CPU doesn't hang, the scheduler is still running, but the boot process hangs). All the kitl code is the same from one BSP to the other, so I cant think what might be wrong, has anyone got any suggestions that I can try? -- Martin Tag: build query Tag: 101123
  - 24
    - pointer in driver loses address Hello, I have a problem in my gpio driver. I work with wince 6.0, MainstoneIII, PXA270. During the init phase of my driver I call MmMapIoSpace to get a virtual address to a pointer that points to the gpio registers. That call is made this way: g_pGpioRegs =(XLLP_GPIO_T *) MmMapIoSpace(PA, sizeof(XLLP_GPIO_T), FALSE); PA is the physical address of the gpio registers. The pointer, g_pGpioRegs, is a global parameter in my file. In the function GIO_IOControl I'm using that pointer to get to the gpio registers, read from and write to the registers. For some reason it doesn't work. I tried writing to the registers immediately after the call to MmMapIoSpace and it worked fine. The same write doesn't work from inside the GIO_IOControl function. I checked the addresses in both places (one immediately after the call to MmMapIoSpace and the other inside the GIO_IOControl function) and they are identical. A lot of things happen in the system between those two functions, since the first is during initialization, and the second is being called from an application. As far as I understand, somewhere in between those two functions something happens that makes the pointer losing the address. Please help me figure out what's happening here and solve this issue. A lot of thanks. Tag: build query Tag: 101117
  - 25
    - IESIMPLE How can does default use IESIMPE? or user can use command change IESAMPLE/IESIMPE Tag: build query Tag: 101114

hi all,

I am working in applicaton development on top of bluetooth stack.
wince has given some sample drivers in the following path:
C:\WINCE500PUBLIC\COMMON\OAK\DRIVERS\BLUETOOTH\SAMPLE
In the workspace if I see in the file view these are defaultly
excluded from
the build. How I can make these are part of my image. by
including
to the
build.
Any body who knows about this pls reply me.

Thanks and regards,
srikanth

Top