boot.bib

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - update OS on custom device Hi All, Are there any ideas as how I can run OS updates to a custom device after it is released? For example, at what sequence would the updates have to be written? I am thinking that it would have to be done straight after the bootloader startup and before the kernel address is loaded/jumped to. Is this correct? What would need to be done? I am unclear how updates are performed across a custom device. Any ideas? Thanks, RH Tag: boot.bib Tag: 91607
  - 2
    - about DHCP Hello, 1. Enviroment: CEPC or Cirrus Logic EDB9315A with DHCP enable, LAN with a DHCP server on it. 2. During eboot seesion, DHCP requesting is always OK! 3. During kernel starting, DHCP is ALWAYS fail!!! 4. When downloading debug-version(KITL enable) nk.bin into EDB9315A board, kernel debugger can connect to the target although DHCP was fail. With ipconfig on command line of the target, ip is 169.254.46.157, and my host ip is 192.168.201.131. I am confused with it. Thanks for anybody for any comments! Thanks in advance Chengshi x10@emtronix.com.cn Tag: boot.bib Tag: 91604
  - 3
    - Splash Screen bootloader Hi all, I am trying to build a custom splash screen. -with the help of some previous posts here http://groups.google.com/group/microsoft.public.windowsce.platbuilder/browse_thread/thread/91eff976a595cb42/0625c5cf80b91d89?lnk=st&q=splash+screen+wince&rnum=6#0625c5cf80b91d89 I was able to achieve some progress. -Is it possible to as well integrate dynamic content(gif,audio and video) rather than static(.bmp) only? -I tried to test this on x86 emulator(platform-mobile handheld template) w/o any success. Any kind of help would be appreciated. regards anand Tag: boot.bib Tag: 91596
  - 4
    - about IE6.0 vs MFC Hi, All In my design(CE5.0), the applications are written in eVC based MFC, and IE6.0 is not required. But if removing of IE6.0, the SDK derived from the OSDesign doesn't provide supporting MFC based program written in eVC. The problem is if IE6.0 item is added, the size of the debug version exceeds the limit of 32MB for kernel, my design has total 64MB, 32MB for OS, 32MB for RAM, which is seperated each other in physical address. Please let me know how to do with the problem. Thanks for all help! Cheng Shi x10@emtronix.com.cn Tag: boot.bib Tag: 91592
  - 5
    - bootloader source files Hi All, Could somebody please tell me, at what location can I find ALL the source files related to the bootloader. I have been trying to work through the Microsoft Windows CE 5.0 Board Support Package, Boot Loader, and Kernel Startup Sequence article (http://msdn2.microsoft.com/en-us/library/aa446905.aspx) but I cannot seem to find the functions EbootMain() and BootloaderMain() that are supposed to be in main.c and Blcommon.c respectively and I am wondering whether I actually have the correct files. Thanks Tag: boot.bib Tag: 91590
  - 6
    - PXA270 USB Host Controller WINCE 4.1 Hi All, I am hoping someone out there who has some experience with USB host drivers can give me some hints. We have a hardware design based on the MAINSTONE II reference design. However our BSP is firmly entrenched in WINCE 4.1 (came from a PXA255 design). For the most part, I have been able to take code from the WINCE 5 BSP, and drop those changes into the appropriate files of our WINCE 4.1 BSP. However in the case of the USB host controller, the PXA 255 didn't have this so our BSP doesn't already have a skeleton for me to flesh out. What I'd like to get some idea of is exactly what are the steps I need to do add the USB host controller. I have brought all of the bul_ohci.cpp code over to the 4.1 BSP, and it compiles, but its a .LIB, that links to a .LIB (ohcdmdd2.lib) that it reportedly doesn't know how to make. Some place I'm sure it gets made into a DLL no? Furthermore, I'm not even sure from the PB GUI, what components I need to add if it were to work. Right now under "USB Host" I've included ohcdmdd and from the "Core OS Services" I added USB Host Support for the HID class. My thought was I'd start by getting a USB mouse or keyboard to play nice. Some place in the registry I am sure I need to tell device.exe exactly what to load, unless perhaps this is done when the component (whatever component that is), is selected in the GUI. Any words of wisdom any of you out there care to impart I'd greatly appreciate. Regards, Tag: boot.bib Tag: 91586
  - 7
    - With irDA support WinCE 5.0 boots slower... Hi Is it me or does WinCE 5.0 boot segnificant slower with IrDA support ?? I guess it normal behavior or am I missing something (maybee a component that is needes ??) /Thomas Tag: boot.bib Tag: 91582
  - 8
    - ANN: Windows CE Live Chat Tomorrow! Just a note that we'll be hosting an online chat tomorrow morning concerning Windows CE 5.0 and CE 6 beta! Members of the development team will be on hand ready to answer your questions, so bring 'em on! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Title: Windows CE Live Chat! October 25, 2006 9:00 - 10:00 A.M. Pacific time Additional Time Zones: http://www.timeanddate.com/worldclock/fixedtime.html?month=10&day=25&year=2006&hour=9&min=0&sec=0&p1=234 Description: Do you have tough technical questions regarding Windows CE 5.0 for which you're seeking answers? Do you want to learn more about the Windows CE 6 beta? Do you want to tap into the deep knowledge of the talented Microsoft Embedded Devices Group members? If so, please join us for a live Windows CE chat and bring on the questions! Windows CE is the operating system that is powering the next generation of 32-bit, small-footprint and mobile devices. This chat will cover the tools and technologies used to develop devices using the Windows CE 5.0 and CE 6 beta operating systems. To join this chat, please log on via the main MSDN chat page at: http://msdn.microsoft.com/chats/ Chat Transcripts: Missed a recent chat? We welcome you to visit the Transcript Archive. Transcripts are usually posted within two weeks of the live event. http://msdn.microsoft.com/chats/transcripts/mobileembedded/default.aspx ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Sue sloh@microsoft.com (remove "online" from reply-to address) http://blogs.msdn.com/ce_base/ _____________________________________________________________ This posting is provided "AS IS" with no warranties, and confers no rights. _____________________________________________________________ Tag: boot.bib Tag: 91580
  - 9
    - Bad RX packet during BIN download I am having difficulty downloading images from platform builder to a target. The image is only 10 MB but it fails roughly 75% of the time. The serial output from the target during download is: Download BIN file information:E1016000 (Memory)5.255.255 -----------------------------------------------------CP() Sent == ProcessDHCP()::DHCP_INIT== [0]: Base Address=0x220000 Length=0x167EF78 Got Response from ****** OEMVerifyMemory Checking Range [ 0x220000 ==> 0x189EF77 ] FindAllPCINetCard: Searching for PC ****** RAM Address ****** Bad RX packet [Header: 0xED ****** RAM Address ******ll to 0x0 Base Class, Subclass = 2, 0 => NETWORK_CTLR Bad RX packet [Header: Interrupt = 10..00:01:C0:01:DF:F8 BaseAddress[0] = 0xF800 (I/O) Once it does complete I am able to transfer files from the network with no signs of error. I have tried all differnet network cabling, and a different carrier board for my processor board. I am using a Compulab CM-iGLX board based on AMD's Geode LXD800 CPU. 1) Has anyone else experienced this sort of problem? 2) Can anyone explain why this occurs during load but not during traditional networking operations? 3) Is there anything I can try at this point? Tag: boot.bib Tag: 91579
  - 10
    - Bluetooth cips Hello All! I chose BT chip for my board. This is not external chip (like USB dongles for example), but integrayted in board. So, I would like to know what BT chips approach for WinCE 5.0. Any that supports HCI specification? Or not?.. Only chips that support stack 1.2 or 2.0 are comparible too and work fine? What I should make at software develpment time - I need to write some drivers or drivers that includes in WinCE 5.0 work fine? In a word, I shall appreciate any information and/or list of supported chips in WinCE. Regards, Sergey. Tag: boot.bib Tag: 91577
  - 11
    - Bluetooth dongle Hello all! Excuse for my bad English. I have connected Bluetooth USB dongle (Canyon CN-BTU-3) to USB-host on my SMDK2410-based board. All other USB devices like mouse, flash etc. works fine. But in this case BT device does not work. I have the following log: ***************************************** 0x83c40ca4: CHub(Root tier 0)::HubStatusChangeThread - device attached on port 1 . . . 0x83c40ca4: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_USING_ADDRESS0, failures = 0 0x83c40ca4: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_RESET_AND_ENABLE_PORT, failures = 0 0x83c40ca4: +CRootHub::ResetAndEnablePort - port = 1 0x83c40ca4: Root hub, after reset & enable, port 1 0x83c40ca4: -CRootHub::ResetAndEnablePort - port = 1, returning 1 0x83c40ca4: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_GET_DEVICE_DESCRIPTOR_TEST, failures = 0 0x83c40ca4: +CHub(Root tier 0)::GetDescriptor - address = 0, Type = 1, Index = 0, Size = 8 0x83c40ca4: +CPipe(Control)::IssueTransfer, address = 0 0x83c40ca4: +CControlPipe::AreTransferParametersValid 0x83c40ca4: -CControlPipe::AreTransferParametersValid, returning BOOL 1 0x83c40ca4: +CControlPipe::ScheduleTransfer 0x83c40ca4: +CHW::ListControl 1 ena:1 fill:1 0x83c40ca4: -CControlPipe::ScheduleTransfer 0x83c40400: CPipe::CFDT td 000d5420 nxt 000d5440 xfr 00033180 0x83c40400: +CQueuedPipe(Control)::CheckForDoneTransfers 0x83c40400: -CQueuedPipe(Control)::CheckForDoneTransfers, returning BOOL 0 0x83c40400: CPipe::CFDT td 000d5440 nxt 000d5460 xfr 00033180 0x83c40400: +CQueuedPipe(Control)::CheckForDoneTransfers 0x83c40400: -CQueuedPipe(Control)::CheckForDoneTransfers, returning BOOL 0 0x83c40400: CPipe::CFDT td 000d5460 nxt 00000000 xfr 00033180 0x83c40400: +CQueuedPipe(Control)::CheckForDoneTransfers 0x83c40400: CQueuedPipe::CheckForDoneTransfers: completing xfr 00035c70 0x83c40400: -CQueuedPipe(Control)::CheckForDoneTransfers, returning BOOL 1 0x83c40ca4: -CPipe(Control)::IssueTransfer - address = 0, xfr 00035c70 can 00035980 returning STATUS 1 0x83c40ca4: -CHub(Root tier 0)::GetDescriptor - address = 0, Type = 1, Index = 0, Size = 8, returning 1 0x83c40ca4: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_SET_ADDRESS, failures = 0 0x83c40ca4: +CPipe(Control)::IssueTransfer, address = 0 0x83c40ca4: +CControlPipe::AreTransferParametersValid 0x83c40ca4: -CControlPipe::AreTransferParametersValid, returning BOOL 1 0x83c40ca4: +CControlPipe::ScheduleTransfer 0x83c40ca4: +CHW::ListControl 1 ena:1 fill:1 0x83c40ca4: -CControlPipe::ScheduleTransfer 0x83c40400: CPipe::CFDT td 000d5480 nxt 000d54a0 xfr 00033180 0x83c40400: +CQueuedPipe(Control)::CheckForDoneTransfers 0x83c40400: -CQueuedPipe(Control)::CheckForDoneTransfers, returning BOOL 0 0x83c40400: CPipe::CFDT td 000d54a0 nxt 00000000 xfr 00033180 0x83c40400: +CQueuedPipe(Control)::CheckForDoneTransfers 0x83c40400: CQueuedPipe::CheckForDoneTransfers: completing xfr 00035c70 0x83c40400: -CQueuedPipe(Control)::CheckForDoneTransfers, returning BOOL 1 0x83c40ca4: -CPipe(Control)::IssueTransfer - address = 0, xfr 00035c70 can 00035980 returning STATUS 1 0x83c40ca4: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_LEAVE_ADDRESS0, failures = 0 0x83c40ca4: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_GET_INITIAL_DEVICE_DESCRIPTOR, failures = 0 0x83c40ca4: +CHub(Root tier 0)::GetDescriptor - address = 1, Type = 1, Index = 0, Size = 8 0x83c40ca4: +CPipe(Control)::IssueTransfer, address = 1 0x83c40ca4: +CControlPipe::AreTransferParametersValid 0x83c40ca4: -CControlPipe::AreTransferParametersValid, returning BOOL 1 0x83c40ca4: +CControlPipe::ScheduleTransfer 0x83c40ca4: +CHW::ListControl 1 ena:1 fill:1 0x83c40ca4: -CControlPipe::ScheduleTransfer 0x83c40400: CPipe::CFDT td 000d54c0 nxt 00000000 xfr 00033180 0x83c40400: +CQueuedPipe(Control)::CheckForDoneTransfers 0x83c40400: -CQueuedPipe(Control)::CheckForDoneTransfers, returning BOOL 0 0x83c40400: CPipe::CFDT td 000d54e0 nxt 00000000 xfr 00033180 0x83c40400: +CQueuedPipe(Control)::CheckForDoneTransfers 0x83c40400: CQueuedPipe::CheckForDoneTransfers: completing xfr 00035c70 0x83c40400: -CQueuedPipe(Control)::CheckForDoneTransfers, returning BOOL 1 0x83c40ca4: -CPipe(Control)::IssueTransfer - address = 1, xfr 00035c70 can 00035980 returning STATUS 1 0x83c40ca4: -CHub(Root tier 0)::GetDescriptor - address = 1, Type = 1, Index = 0, Size = 8, returning 0 0x83c40ca4: CHub(Root tier 0)::AttachDevice - failure on DEVICE_CONFIG_STATUS_SCHEDULING_GET_INITIAL_DEVICE_DESCRIPTOR step 0x83c40ca4: +CPipe(Control)::IsPipeHalted 0x83c40ca4: -CPipe(Control)::IsPipeHalted, *lpbHalted = 0, returning HCD_REQUEST_STATUS 1 0x83c40ca4: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_GET_INITIAL_DEVICE_DESCRIPTOR, failures = 1 0x83c40ca4: +CHub(Root tier 0)::GetDescriptor - address = 1, Type = 1, Index = 0, Size = 8 0x83c40ca4: +CPipe(Control)::IssueTransfer, address = 1 0x83c40ca4: +CControlPipe::AreTransferParametersValid 0x83c40ca4: -CControlPipe::AreTransferParametersValid, returning BOOL 1 0x83c40ca4: +CControlPipe::ScheduleTransfer 0x83c40ca4: +CHW::ListControl 1 ena:1 fill:1 0x83c40ca4: -CControlPipe::ScheduleTransfer 0x83c40400: CPipe::CFDT td 000d5420 nxt 000d5440 xfr 00033180 0x83c40400: +CQueuedPipe(Control)::CheckForDoneTransfers 0x83c40400: -CQueuedPipe(Control)::CheckForDoneTransfers, returning BOOL 0 0x83c40400: CPipe::CFDT td 000d5440 nxt 00000000 xfr 00033180 0x83c40400: +CQueuedPipe(Control)::CheckForDoneTransfers 0x83c40400: CQueuedPipe::CheckForDoneTransfers: completing xfr 00035c70 0x83c40400: -CQueuedPipe(Control)::CheckForDoneTransfers, returning BOOL 1 0x83c40ca4: -CPipe(Control)::IssueTransfer - address = 1, xfr 00035c70 can 00035980 returning STATUS 1 0x83c40ca4: -CHub(Root tier 0)::GetDescriptor - address = 1, Type = 1, Index = 0, Size = 8, returning 0 0x83c40ca4: CHub(Root tier 0)::AttachDevice - failure on DEVICE_CONFIG_STATUS_SCHEDULING_GET_INITIAL_DEVICE_DESCRIPTOR step 0x83c40ca4: +CPipe(Control)::IsPipeHalted 0x83c40ca4: -CPipe(Control)::IsPipeHalted, *lpbHalted = 0, returning HCD_REQUEST_STATUS 1 0x83c40ca4: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_GET_INITIAL_DEVICE_DESCRIPTOR, failures = 2 0x83c40ca4: +CHub(Root tier 0)::GetDescriptor - address = 1, Type = 1, Index = 0, Size = 8 0x83c40ca4: +CPipe(Control)::IssueTransfer, address = 1 0x83c40ca4: +CControlPipe::AreTransferParametersValid 0x83c40ca4: -CControlPipe::AreTransferParametersValid, returning BOOL 1 0x83c40ca4: +CControlPipe::ScheduleTransfer 0x83c40ca4: +CHW::ListControl 1 ena:1 fill:1 0x83c40ca4: -CControlPipe::ScheduleTransfer 0x83c40400: CPipe::CFDT td 000d5420 nxt 000d5440 xfr 00033180 0x83c40400: +CQueuedPipe(Control)::CheckForDoneTransfers 0x83c40400: -CQueuedPipe(Control)::CheckForDoneTransfers, returning BOOL 0 0x83c40400: CPipe::CFDT td 000d5440 nxt 00000000 xfr 00033180 0x83c40400: +CQueuedPipe(Control)::CheckForDoneTransfers 0x83c40400: CQueuedPipe::CheckForDoneTransfers: completing xfr 00035c70 0x83c40400: -CQueuedPipe(Control)::CheckForDoneTransfers, returning BOOL 1 0x83c40ca4: -CPipe(Control)::IssueTransfer - address = 1, xfr 00035c70 can 00035980 returning STATUS 1 0x83c40ca4: -CHub(Root tier 0)::GetDescriptor - address = 1, Type = 1, Index = 0, Size = 8, returning 0 0x83c40ca4: CHub(Root tier 0)::AttachDevice - failure on DEVICE_CONFIG_STATUS_SCHEDULING_GET_INITIAL_DEVICE_DESCRIPTOR step 0x83c40ca4: +CPipe(Control)::IsPipeHalted 0x83c40ca4: -CPipe(Control)::IsPipeHalted, *lpbHalted = 0, returning HCD_REQUEST_STATUS 1 0x83c40ca4: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_FAILED, failures = 3 0x83c40ca4: +CDeviceGlobal::FreeAddress - address = 1 0x83c40ca4: -CDevice::FreeAddress - address = 1 0x83c40ca4: +CQueuedPipe(Control)::ClosePipe 0x83c40ca4: +CHW::ListControl 1 ena:0 fill:0 0x83c40ca4: +CHW::ListControl 1 ena:1 fill:0 0x83c40ca4: -CQueuedPipe(Control)::ClosePipe 0x83c40ca4: +CControlPipe::~CControlPipe 0x83c40ca4: -CControlPipe::~CControlPipe 0x83c40ca4: +CQueuedPipe::~CQueuedPipe 0x83c40ca4: -CQueuedPipe::~CQueuedPipe 0x83c40ca4: +CPipe::~CPipe 0x83c40ca4: -CPipe::~CPipe 0x83c40ca4: +CRootHub::DisablePort - port = 1 0x83c40ca4: -CRootHub::DisablePort - port = 1 0x83c40ca4: -CHub(Root tier 0)::AttachDevice - port = 1, fIsLowSpeed = 0, address = 1 0x83c40ca4: +CRootHub::WaitForPortStatusChange ***************************************** So AttatcDevice failures on DEVICE_CONFIG_STATUS_SCHEDULING_GET_DEVICE_DESCRIPTOR_TEST step three times and BT device can not be connected. But WHY??? All other USB devices works fine and USB host on my board is efficient. BT dongle also works fine on my PC. I shall appreciate any help and advices. Regards, Sergey. Tag: boot.bib Tag: 91574
  - 12
    - *.dat files in build process hi i try to include some conditions in my project.dat file in the following manner: #if $(MY_CONDITION)==1 Directory("\Windows\.... Directory("\Windows\.... #endif i set the the MY_CONDITION variable using the Platformbuilder 5.0 Menue->Platform->Settings Enviroment tab and set the environment variable there. --> but it has no effects at all when i have a look at the merged initobj.dat file. how can i achieve this? Tag: boot.bib Tag: 91573
  - 13
    - NDIS, interrupts, and headaches... Hi. I am trying to port an SMSC9118 ethernet driver to a Freescale board, and am having some difficulty understanding how interrupts are handled. I have an interrupt handler called OEMInterruptHandler that catches the system timer interrupts and, apparently also captures the interrupts coming from the ethernet controller. The trouble is that I can't get the interrupt to get passed to the NDIS layer so that it sends it back to the driver's interrupt handler. So, how does NDIS manage interrupts? From what I read, it installs an IST that calls the driver's interrupt handler, but I don't understand if this IST is supposed to be called from an ISR installed by NDIS, or if I'm supposed to call t from my OEMInterruptHandler. So does anyone have any links that explain how NDIS works? In advance, thanks. Tag: boot.bib Tag: 91568
  - 14
    - SendMessageTimeout not included in coredll.dll Hello all. My no UI CE Device is ready to develop with eMbedded VC, but I'm trying to develop with Visual Studio 2005. From now I can connect with device, deploy and run my program but not debug it. If I launch "Start Debugging" I get the error via Platform Builder: 174104 PID:41f18a9e TID:41d88cce ERROR: function @ Ordinal 1495 missing in Module 'coredll.dll' 174105 PID:41f18a9e TID:41d88cce !!! Please Check your SYSGEN variable !!! As is documented in some MSDN blog, I find that ordinal, and it corresponds to SendMessageTimeout, that is part of Message Queue. Compiling option is GWES_MSGQUE. In my catalog more near option is GWES_MSGQUEUE. I've included it, but my coredll.dll continues not having 1495 ordinal as I can see doing a dumpbin /exports. -- Visita mi blog: http://rfog.blogsome.com Libros, ciencia ficción y programación ======================================== Pilas Duraser para un "conejo" inagotable };-). Tag: boot.bib Tag: 91567
  - 15
    - How to build tktest.exe Hello I want to build a minumum CE kernel ,with tktest as the only one process. But when I Build the tktest project (from the platform builder), it output tktest.lib, not tktest.exe. How to build the tktest.exe ? Is it the same as a general CE application ? Thanks Charles in ryltk Tag: boot.bib Tag: 91565
  - 16
    - STANDARD UART on PXA27X Hi, I'm developing a bsp for a PXA27X Mainstone II board and i would like to use STANDARD UART for the debug function. I have added in the debugserial.c file the configuration of STUART and my loader che send out the debug string to my terminal windows. When i try to send the character from my PC to se STUART, the board doesn't receive anything. I have then configured in the same way my FFUART and it works fine. Someone knows if STUART need somenthing more to be set in order to work? I have downloaded a linux boot loader (uboot) and my STUART can transmit and receive data. Thanks Rudy Barbieri ...desperate developer.... Tag: boot.bib Tag: 91563
  - 17
    - BinFS and RAM resources Hi, I am using a device that has 64MB of RAM and 128MB of NAND Flash. At the moment the system is booting from RAM after the NK.bin is copied there from the NAND flash. The NK.bin size is 32MB. After the system comes up I have about 20MB of free RAM left. I am currently using all RAM for program memory. I was wondering how much will the move to BinFS improve my free RAM level? Am I going to free the all 32MB (NK.bin size) or only part of it? In the non BinFS mode, how many copies of the source code of a running dll are there? Is dll running from the NK.bin copy on the RAM or is it coppied again to the heap(2 copies overall)? Thank you Ohad Yaniv Tag: boot.bib Tag: 91560
  - 18
    - UCB1400 driver Hi, Iam using Colibri module PXA270 as my target system with UCB1400 chip integrated. Can anyone tell me, how could I enable and use the UCB1400 driver on the linux platform. In the defconfig file, I have enabled CONFIG_INPUT, CONFIG_SND, CONFIG_SOUND,CONFIG_SND_PXA2xx_AC97, CONFIG_SND_PXA2xx_PCM to =y. The kernel builds well, but on boot it doesn't show me the UCB1400 driver gets loaded into the kernel and there are no more interrupts enabled in /proc/interrupts with following boot message, ..... ..... ts: UCB1x00 touchscreen protocol output Advanced Linux Sound Architecture Driver Version 1.0.9rc2 ( The MAr 24 10:34:34 2005 UTC) ALSA device list: No soundcards found. .... .... Any help will be appreciated to fix this issues. Thanks Sara Tag: boot.bib Tag: 91559
  - 19
    - GPS module I have GPS USB module (Garmin GPS18 USB). Does anyone know if USB driver is available for Windows CE 5.0? Tag: boot.bib Tag: 91557
  - 20
    - about ddraw sample application Hi, everyone? I have been testing any video function with via cn700 board. Among ddraw sample applications, only mosquito.exe program can't be run correctly. The image of mosquito was not shown. Instead, any rectangle is moving around the screen. Anyone can help me? Tag: boot.bib Tag: 91555
  - 21
    - Can't find import NdisQueryPacket in ndis.dll ------------------------------------------------------------------------------ --------------------- Error: Can't find import NdisQueryPacket in ndis.dll Error: Can't find import NdisQueryPacket hint 182 in ndis.dll Error: Fatal import error in tcpstk.dll No imports for wavclick.dll Fatal error hit, exiting... makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec). makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec). ------------------------------------------------------------------------------ --------------------- can anybody solve it? -- desire to change Message posted via PocketPCJunkies.com http://www.pocketpcjunkies.com/Uwe/Forums.aspx/wince-pb/200610/1 Tag: boot.bib Tag: 91550
  - 22
    - ROMOFFSET in Eboot.bib Hello All, I am developing EBOOT loader for my SDK Board. Currently i am able to download and Eboot.sre using the onboard Boot loader. My Eboot is prepared to execute from RAM. Now i am trying to burn EBoot loader from FLASH. What all nexeccsary changes i need to do. For Testing i am thinking of downloading EBOOT to some higher order RAM Address and then relocate it to the place where i want to execute it. When i see the EBOOT.sre i find out that the start Address in the S7 Record is : ROMOFFSET*2+ Image Start Address for example: If the Start Address of Image is 80021000 and ROMOFFSET = 0x00700000 then According to me start address of Srec Image should be 80721000 but in the S7 Srecord i find it 80E21000 I am now trying to figure out what could possibly be the reason for the same. Contents of my EBOOT are as: MEMORY ; Name Start Size Type ; ------- -------- -------- ---- STACK 80000000 00010000 RESERVED RAM 80010000 00010000 RAM EBOOT 80020000 00040000 RAMIMAGE RSVD 80060000 0009F000 RESERVED ARGS 800FF000 00001000 RESERVED CONFIG AUTOSIZE=OFF COMPRESSION=OFF PROFILE=OFF KERNELFIXUPS=ON ROMSTART=80020000 ROMWIDTH=32 ROMSIZE=00400000 ; The bootloader is fixed up to run from RAM, but is stored in flash. ROMOFFSET ; adjusts the .bin file record headers to that they lie in flash (this tells the ; bootloader already on the device to store the image in flash). ROMOFFSET=00700000;3C9E0000 SRE=ON Regards, Rishabh Kumar Goel Tag: boot.bib Tag: 91549
  - 23
    - usb mass storage not works if our own sd driver used Hi, We developed a sd card driver, it works in normal condition. Now we want to use it as an usb mass storage disk, but it fails. If we replace the driver with the SDMemory driver, the SDMemory driver works. Is there some funtions needed be implemented to support the usb mass storage? Thanks Robert Tag: boot.bib Tag: 91545
  - 24
    - What data and how to set it in the ARGS session that described in eboot.bib I'm debug my bootloader and the debug message is "ERROR: Invalid Ethernet address read from Ethernet controller.". I cut some related code here. 0xA00FF000's physical address is 0x000FF000, a flash address. My question is how these datas are initialized. I can't find anythere to check the value stored in 0x000FF000 code****************************************************************** typedef struct { OAL_ARGS_HEADER header; UINT8 deviceId[16]; // Device identification OAL_KITL_ARGS kitl; UINT32 dbgSerPhysAddr; // Debug serial physical address } BSP_ARGS, *PBSP_ARGS; BSP_ARGS *g_pBSPArgs = (BSP_ARGS *) IMAGE_SHARE_ARGS_UA_START; #define IMAGE_SHARE_ARGS_UA_START 0xA00FF000 if (!g_pBSPArgs->kitl.mac[0] && !g_pBSPArgs->kitl.mac[1] && !g_pBSPArgs->kitl.mac[2]) { EdbgOutputDebugString("ERROR: Invalid Ethernet address read from Ethernet controller.\n"); return(FALSE); } config.bib****************************************************************** IF IMGFLASH RSVD 80000000 000FF000 RESERVED ARGS 800FF000 00001000 RESERVED NK 9CA00000 03000000 RAMIMAGE RAM 80100000 03F00000 RAM ENDIF eboot.bib******************************************************************* eboot.bib STACK 80000000 00010000 RESERVED RAM 80010000 00010000 RAM EBOOT 80020000 00040000 RAMIMAGE RSVD 80060000 0009F000 RESERVED ARGS 800FF000 00001000 RESERVED(it used to be "ARGS 80FF0000 00001000 RESERVED", I changed it by myself) ***************************************************************************** Tag: boot.bib Tag: 91544
  - 25
    - USB Mass Storage function driver supporting multiple disks (DSK1: & DSK3:) Currently I have the USB Mass Storage function driver exposing my first SD card (DSK1:). Below you can see the registry entries for it. What I would like to do is expose both of my SD disks (DSK1: & DSK3). Is there a way to do this easily or does the "usbmsfn.dll" only support one disk? Current Registry Settings: ; @CESYSGEN IF CE_MODULES_USBMSFN [HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers] "ClientDriver"="\\Drivers\\USB\\FunctionDrivers\\Mass_Storage_Class" [HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers\Mass_Storage_Class] "Dll"="usbmsfn.dll" "Vendor"=dword:17CC "Product"=dword:2280 "InterfaceSubClass"=dword:06 "InterfaceProtocol"=dword:50 "DeviceName"="DSK1:" "Removable"=dword:0 ; @CESYSGEN ENDIF CE_MODULES_USBMSFN Tag: boot.bib Tag: 91537
- Next
  - 1
    - Mouse problem. I am using a Windows Mobile 5 system where a Bluetooth nouse is embeddd in a device to provide interaction between the two. Because the mouse doesn't move, there is no X,Y aspect to the mouse. I only want the wheel and button functions. The problem is that it appears that the mouse starts above the WM5 Start menu. When you click it, it activates the statrt menu. I can assign the button clicks to apps to resolve some aspects but the wheel doesn't show. What to get The Y value. Can write a C++ app to track raw aspects of the mouse but I am programming the app using Compact Framework2 (C#, VB andC++) Any ideas on how to get at the mouse in a raw manner. Happy with PInvoke. ie a Native DLL etc Options may be -Rewrite the driver.. not pratical -Get some hooks into the underlying windows system - Tap into the driver's Stream. Looking at registry, it seems that the device uses a a stream class. One question, is it possible to programmatically change the position of the a/the mose? PS: Posting to CF ng as well. Thx for any help -- David Jones Senior Lecturer School of Electrical & Computer Engineering RMIT University +61 3 99255318 Tag: boot.bib Tag: 91536
  - 2
    - external USB audio card for WinCE 5.0 Hi, -do you know any external USB audio card that has drivers for Windows Ce ? Like the M-Audio Sonica USB, USB 2.0 Audio Blaster, Audigy 2NX , etc -Does anybody know if there is a sample USB audio driver somewhere ? Regards Javier -- Using Opera's revolutionary e-mail client: http://www.opera.com/mail/ Tag: boot.bib Tag: 91528
  - 3
    - Determing addresses used on ISA port Hi, Is there a way to determine what addresses are in use on the ISA bus? Thanks Ole Tag: boot.bib Tag: 91519
  - 4
    - Missing urlmon.lib Visual Studio 2005: compiling my project against the SDK supplied by my Windows CE vendor this error occurs: Error 1 fatal error LNK1104: cannot open file 'urlmon.lib' How to solve it? Mhaxx Tag: boot.bib Tag: 91516
  - 5
    - AT91SAM9261-EK - an immage booting problem Hallo guys I have been making a Win CE immage for AT91SAM9261-EK, I use the Platform Builder 5.0 with all last updates and last version of BSP for this board. And I have a problem with booting CE system. After attaching the device and downloading the immage the booting will start. But a few steps before finishing it the booting will stop, without any error or warning. I tried to change various settings (platform, platform files, ...), but without any success. I think that there must be a problem with memory maping (virtual to physical address space). But I don't know, where to find and make some changes in OEMAddressTable. I have spent a lot of time and I don't have any ideas now. So, please help. Are there any advice or reccomendation? And what about this OEM address table for ARM processors? George Tag: boot.bib Tag: 91494
  - 6
    - How to enable debug output for eboot.nb0? Hello all. My old eboot.nb0 showed a lot of debug strings into debug serial port, but my new eboot build does not. eboot.nb0 works fine, and boots machine ok, but it only says on serial port: SBTF1234ORX JUMP and nothing more. I've tested a debug build, but it does not say more, and source code is full of EdbgOutputDebugString... Any help, please? -- Visita mi blog: http://rfog.blogsome.com Libros, ciencia ficción y programación ======================================== A donde fueres haz lo que vieres. -- Refrán. Tag: boot.bib Tag: 91492
  - 7
    - finding a file in wince image Hi, I need desperately to find a file I know is in nk.bin how do I do it? any utility? anyone Tnx, Nadav Tag: boot.bib Tag: 91488
  - 8
    - What is the Standard SDK used for? Hi Trying to figure out if our application can use the basic core licence, and the only worry is the Standard SDK is not a core component. The OS has not yet been decided, WinCE is just an option at this stage. What is is used for? Tag: boot.bib Tag: 91482
  - 9
    - How to disable debug messages from Notify.dll? I got a huge amount of debug messages saying: "0x83d918e8: [NOTIFY] ProcessDatabase::started at local time....." I don't no where they come from and if they are normal, but right know I would like to disable the messages which I can do from the Debug Zones dialog box. But instead of doing that boring operation each time I launch the CE I would like to turn off the 'notify.dll' for good. From the help I found that I could enter this in the platform.reg: [HKEY_LOCAL_MACHINE\DebugZones] "Notify" = dword:0 But it doesn't work for me - what did I do wrong and what should I do instead? Thanks - your help is highly appriciated! Ole Tag: boot.bib Tag: 91481
  - 10
    - (Help)( How to notify PowerManager system to resume from idle mode?) Dear Sirs: I have a question when I develop usb driver. When the system was in Idle mode(sleeping mode), User plug in the usb cable, this time I want to resume the system from Idle mode to normal mode, How can I do it in the usb drivers? Please help me, thank you very much. Best Regards Mike Han Tag: boot.bib Tag: 91473
  - 11
    - Au1200 RealTime Clock Dear Greats, I am using Windows CE 5.0, AMD Board Support Package for Au1200 processor. AMD Evaluation boad DBAu1200 reference board. On every boot, my system time reset to default "Jan 1, 2003 12.00 PM" value. Kindly help me in solving this problem. I have seen in the OEMGetRealTime funciton, RealTime = RtcCountToHNs(HalQueryRtcCount()) + RealTimeBias; The RealTimeBias value is a static ULONGLONG data type run time value not stored anywhere. Is this the problem?. Kindly advice me. with regards, Vijayakumar A. Tag: boot.bib Tag: 91463
  - 12
    - Performace issue using Stream Interface Driver Hi, I am developing an Intermediate driver for capturing all packets. Since OS is windows CE, I am using a stream interface driver for taking the data from kernel mode to user mode. This driver on NIC side uses NDIS and on application side provides stream interface (init, read, write). But under CE, device manager runs under user mode. So it very difficult to copy packet that comes under NDIS in kernel mode directly under user mode buffer. The performance is getting degraded and I think i am loosing some packets due to this. Can anyone help me in finding an efficient method of capturing a packet in kernel mode and taking it to application mode. Any help regarding performnce improvement will be highly appreciated. Thanks in advance. Sarath Tag: boot.bib Tag: 91461
  - 13
    - how to make EDB9315A_WINCE500 debug platform Hello! I try to create a debug-version platform using cirrus-logic provided BSP for its evaluation board EDB9315A. There is error line as follows: BUILD: [01:0000000438:ERRORE] c:\WINCE500\PLATFORM\Ep93xx\Src\Drivers\Ethdbg\Cs8950\cs8950.c(1014) : error C2065: 'ZONE_ERROR' : undeclared identifier It seems something wrong about DEBUGZONE, but I can not find where it is. Please let me how to do with it if anybody encountered the similar problem before. Thanks for any help!!! Chengshi Emtronix x10@emtronix.com.cn Tag: boot.bib Tag: 91459
  - 14
    - GWES crash when Raster font support is removed.... Hi When I remove Raster fonts support from my build and I add fonts (Arial, Tahoma, icluding chinese and AGFA ac3 compresiion), GWES is throwing an exception when its is launched..!!! I gues it cant find the nedded fonts support, but reading the PB help state that I only can user Raster font or "normal" fonts. I am I missing some vital component ?? /Thomas Tag: boot.bib Tag: 91453
  - 15
    - Device Emulator for ARM? Dear all, I asked many friends for How to make a Device Emulator using few months ago QFE. Seems no one done? final steps: DMA transport ? <---- we don't know how to do it? Help please Tag: boot.bib Tag: 91443
  - 16
    - Break point in a driver Hi, Is it possible to using breakpoints in a driver? I have tried setting a normal breakpoint but the dubugger seems to ignore that - so how is it done if possible? Thanks Ole Tag: boot.bib Tag: 91442
  - 17
    - Follow up on Platform Builder with Mac Pro and Bootcamp/XP I just wanted to follow up on a message I posted a month ago regarding Platform Builder 5.0 running on a Mac Pro under bootcamp and XP. I have this setup and working great. My previous machine was a dual Xeon 2Ghz with Hyperthread, 2GB RAM and 4 drives in a hardware SATA RAID 0 config. My build times for a clean sysgen in retail was about 17 minutes. On my new Mac Pro running bootcamp and XP my build times have dropped to about 5 minutes. I'm running 2GB RAM and 3 drives in a SATA II RAID 0 config. I'm using the Mac wireless keyboard and "mighty mouse" for input devices. The Mac Pro has two Ethernet adapters so you have one for being attached to your corporate network and another for KITL connections via Ethernet. There are a number of USB Ports so you can easily use USB KITL as well. I now have a build machine that allows me to do testing of CE devices with both the Mac OS and PC OS. It was about $1K cheaper than a comparably equipped Dell and the quality is really in a class of its own. I have yet to install CE 6.0 on it but do have Visual Studio installed and working. A few gotchas: After bootcamp was installed with XP there were a number of devices in the device manager that wouldn't load. I went to Intel's web site and downloaded the latest .INF's for XP for the chipsets and installed those. This fixed a key problem in that upon first boot XP was running the hard disks in PIO mode. After updating the INF files for the chipsets the hard drives started coming up in DMA Mode 5 The standard CE RNDIS driver could not be loaded by XP because it wasn't signed or was suspect by the OS as corrupt. This exact same driver worked fine on my old XP box so I am guessing it has something to do with the new DEP or other protection features on the new Xeon chips using on the Mac Pro. I modified the USB8023.INF file to use RNDISMPX.SYS and USB8023X.SYS instead of the original RNDISMP.SYS and USB8023.SYS and everything worked fine from there. I had to add a serial / parallel card to the box to get ports for collecting debug serial and controlling parallel port driven test devices. Since the expansion bus on the Mac Pro is PCIe, I found a card from Orion (S4P1) that gave me four 16950's and 1 parallel. This installed easily. I ordered the machine with two video cards so I could have up to 4 displays (3 for development, 1 for aux). However, the organization of the PCIe slots on the Mac Pro only give you one 16 channel socket so you can only run one video card at 16 and the other must run at 8. Now about building a BSP so I can boot CE on this thing...... Mark Moeller markmo_at_Qualnetics _dot_com Tag: boot.bib Tag: 91438
  - 18
    - NK.BIN first call after launch..? Hi all, I am trying to get a PXA270 BSP to run on my board, and after the bootloader receives the image from Plaform Builder and displays the message of "Jumping to Virtual Address", I get no more messages on my HyperTerminal. I connected a JTAG emulator to it, and I can see that the board is running some code, but I don't know what code is that. Can I find out what's the first thing an NK.bin image does after it is launched? Or can I find from the map file what's the code at that address? Tag: boot.bib Tag: 91433
  - 19
    - Connectivity Options never opens Hello All, I am having a strange problem trying to configure my connectivity options in PB 5.0. When I select "Target->Connectivity Options" nothing happens. No errors no dialog ... nothing. I can see it thinking for a second (hourglass), but no result. Does anyone know why this might happen. Any help would be greatly appreciated because I cannot connect to my target and I am stuck. Tag: boot.bib Tag: 91426
  - 20
    - Build SDK from console built platform We build 5 different platforms based off of same platform build, but different payload. For us the console build is the easiest and fastest way of doing this without creating 5 different workspaces in the IDE (and re-structuring the folders, but we won't get into that). But we'd also like to buld the platform SDK after building the platform with all options enabled. However, it seems that the SDK build will only work off of a IDE built platform. This is silly since we already have a fully built valid platform. How do you get the SDK build to work from the console built platform? Log follows: BuildSdk: Call CreatePlatformIni.exe BuildSdk: Args: "D:\WINCE500\Public\Thor\Thor.pbxml" "D:\WINCE500\Public\Thor\Makesdk\platform.ini" StartProcess: D:\Program Files\Windows CE Platform Builder\5.00\cepb\bin\CreatePlatformIni.exe CreatePlatformIni: Starting ***Warning: It is recommended that you build a run-time image before building an SDK. Otherwise, the build process for y our SDK might not succeed. CreatePlatformIni: Completed successfully BuildSdk: Call makesdk.com BuildSdk: Args: /inifile:"D:\WINCE500\Public\Thor\Makesdk\platform.ini" StartProcess: D:\Program Files\Windows CE Platform Builder\5.00\cepb\bin\makesdk.com Error adding ceconfig.h. You may need to rebuild the platform. MSI file construction completed. 1 error(s), 0 warning(s). Tag: boot.bib Tag: 91421
  - 21
    - USB suspend/resume data toggle out-of-sync CE 5.0 Hello We're using an Intel PXA27x. We're writing a driver for a USB function connected to the PXA27x OHCI host controller. When we suspend and resume the USB device, the data toggle of the BULK OUT endpoint is always reset to zero. So after resume, there's a 50% chance the device throws away the next BULK OUT data packet because the toggle is wrong. Is this a bug somewhere in the system drivers ? Thx. Tag: boot.bib Tag: 91406
  - 22
    - Dependency problem - Remove ... SYSGEN_AS_FILE I am trying to remove ActiveSync from an OS Design. When I choose delete, it says "Remove non-platform environment variable: SYSGEN_AS_FILE". How? Sorry, I'm new at this. -- Rebecca Reed Sorin, Inc. Arvada, CO 80004 www.sorin.com Tag: boot.bib Tag: 91405
  - 23
    - BIOS Boot loader rebuilt problem Hi. I need to chenge the Bios boot loader code because i want to boot my nk.bin image from HD without user choice with default screen values 1024x768. Now, if i modify the boot.ini file putting "Delay=0", the image boots, but in 640x480. This because in splash.h file there are 2 define #define SPLASH_SCREEN_WIDTH 640 #define SPLASH_SCREEN_HEIGHT 480 i changed to #define SPLASH_SCREEN_WIDTH 1024 #define SPLASH_SCREEN_HEIGHT 768 rebuilt the bootloader..... and now? I have the Setup disk make with Setupdisk.144. I have changed the bldr file with the one created by compiler, reboot the CEPC but now it reboots repeatly. Where i'm wrong? P.S. I'm using wince 5.0 Tag: boot.bib Tag: 91404
  - 24
    - Problem loading XML data in thread I have written the following code to load a big XML file (~2MB) UINT DataRead(LPVOID input) { CVer0_10Doc *doc = (CVer0_10Doc*) input; IXMLDOMDocument* xmlDocPtr; xmlDocPtr = doc->getDocPtr(); IXMLDOMElement *rootElmPtr; COleVariant filename(_T("\\preset.xml")); VARIANT_BOOL vSuccess; xmlDocPtr->load(filename, &vSuccess); if(vSuccess == VARIANT_TRUE) { hr = xmlDocPtr->get_documentElement(&rootElmPtr); if(hr == S_OK && rootElmPtr != NULL) { doc->setTreatmentNode(rootElmPtr); } return 0; } } When I run the function from OnNewDocument DataRead(this); The xml file is loaded as it should, but it take ~5s to load and I want to have the GUI up and running. I tried to load the XML file in a separate thread, the tread is called with AfxBeginThread(DataRead(this)); I have some code in place (not optimal, but still) that ensure that I'm not trying to access the xmlDocPtr anywhere else in the program. I'm running it under WinCE 5.0, a build for AMD Geode GX1 processor. Tag: boot.bib Tag: 91403
  - 25
    - How do we change the priority of drivers? Hi friends, My problem now is that I need to assign priorities to various drivers. We successfully can use ethernet, wireless ethernet, serial communication(RS232) etc on our project but when i use them together i lose some data(WinCE 5.0 and ICOP Vortex86 6071 embedded card). Since the most important of them is serial communication i need to force kernel to give priority to serial first and then others. How can i do this? What registry values need i change? Any help would be greatly appreciated... Thanks... Tag: boot.bib Tag: 91399

In the boot.bib file why nk.exe is used as module name
MODULES
; Name Path Memory Type
; ----------- --------------------------------------------- -----------
nk.exe
$(_TARGETPLATROOT)\target\$(_TGTCPU)\$(WINCEDEBUG)\EBOOT.exe EBOOT

Top

Re: boot.bib by Dean

Dean
Wed Oct 25 08:19:16 CDT 2006

Because the build tools require it.

--
Dean Ramsier - eMVP
BSQUARE Corporation

"mike" <mike@discussions.microsoft.com> wrote in message
news:8EFFBA06-807C-4C71-84D3-37A0FDDEECD8@microsoft.com...
> In the boot.bib file why nk.exe is used as module name
> MODULES
> ; Name Path Memory Type
> ; ----------- --------------------------------------------- -----------
> nk.exe
> $(_TARGETPLATROOT)\target\$(_TGTCPU)\$(WINCEDEBUG)\EBOOT.exe EBOOT

Top

Re: boot.bib by K

K
Wed Oct 25 23:29:44 CDT 2006

The romimage.exe will treat nk.exe as a kernel and will try to use it as an
entry point of theImage.
For more details, you could install the shared source of PB 5.0 and dig into
$(_WINCEROOT)\PRIVATE\WINCEOS\COREOS\NK\TOOLS\ROMIMAGE\ROMIMAGE folder

"Dean Ramsier" <ramsiernospam@nospam.com> ¼¶¼g©ó¶l¥ó·s»D:OnqqneD%23GHA.3344@TK2MSFTNGP03.phx.gbl...
> Because the build tools require it.
>
> --
> Dean Ramsier - eMVP
> BSQUARE Corporation
>
>
> "mike" <mike@discussions.microsoft.com> wrote in message
> news:8EFFBA06-807C-4C71-84D3-37A0FDDEECD8@microsoft.com...
>> In the boot.bib file why nk.exe is used as module name
>> MODULES
>> ; Name Path Memory
>> Type
>> ; ----------- --------------------------------------------- -----------
>> nk.exe
>> $(_TARGETPLATROOT)\target\$(_TGTCPU)\$(WINCEDEBUG)\EBOOT.exe EBOOT
>
>

Top