not able to generate event from the driver

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - where is eboot's ethernet download buffer? hello, this is ce 5.0, mainstoneii's eboot.bib i was placing my big data buffer in 80060000, which is GAP, reserved for future. and I found out that someone is using this space during image download. and it happen in the exact same time(well % of the download it is) if I move my data futher, then the download can go futher. seems it is the eboot downloading buffer. now I move my data to 83F00000 and everything works fine. but it is not a GOOD way to avoid problem, right? so can anyone tell me how to config the eboot download buffer? ; 8000.0000 -+ ; | Bootloader Stack (64KB) ; 8001.0000 -+ ; | Bootloader RAM (64KB) ; 8002.0000 -+ ; | Bootloader Code (256KB) ; 8006.0000 -+ ; | GAP (reserved for future) ; 800F.F000 -+ ; | ARGS (4KB) ; 8010.0000 -+ ; | ; | OS (NK) Code (48MB) ; | ; 8310.0000 -+ **auto-size** ; | ; | OS (NK) RAM (15MB) ; | ; 8400.0000 -+ ; ;****************************************************************************** MEMORY ; Name Start Size Type ; ------- -------- -------- ---- STACK 80000000 00010000 RESERVED RAM 80010000 00010000 RAM EBOOT 80020000 00040000 RAMIMAGE RSVD 80060000 0009F000 RESERVED ARGS 80FF0000 00001000 RESERVED CONFIG AUTOSIZE=OFF COMPRESSION=OFF PROFILE=OFF KERNELFIXUPS=ON ROMSTART=80020000 ROMWIDTH=32 ROMSIZE=00040000 ; The bootloader is fixed up to run from RAM, but is stored in flash. ROMOFFSET ; adjusts the .bin file record headers to that they lie in flash (this tells the ; bootloader already on the device to store the image in flash). ROMOFFSET=3C9E0000 MODULES ; Name Path Memory Type ; ------ ---------------------------------------------- ----------- nk.exe $(_TARGETPLATROOT)\target\$(_TGTCPU)\$(WINCEDEBUG)\eboot.exe EBOOT Tag: not able to generate event from the driver Tag: 68803
  - 2
    - interrupt mode in eboot? did anybody enabled interrupt in eboot? I am using xscale 27x and pb 5.0 Tag: not able to generate event from the driver Tag: 68794
  - 3
    - Localized versions of Windows Embedded DevWire newsletter Hello Windows Embedded enthusiasts: Just a short note to let you know that we've recently instituted localized versions of our Microsoft Windows Embedded DevWire newsletter. If you're not familiar with the DevWire, it's our monthly technical communiqué to professional and non-professional developers and business decision-makers with an interest in Windows Embedded. Aside from our worldwide English edition, the DevWire is now available in Korean, Japanese, Traditional Chinese, Simplified Chinese, and a second English version dedicated to our Indian audience. I invite you to subscribe to the DevWire or update your subscription to a localized version of your choice by visiting our subscription management page: http://msdn.microsoft.com/embedded/community/community/devwire/default.aspx Regards, -- Nick White Product Manager & Developer Community Lead Mobile and Embedded Devices Division Microsoft Corporation http://msdn.microsoft.com/mobility/community/ http://msdn.microsoft.com/embedded/community/ Do have an opinion on the effectiveness of Microsoft Windows Mobile and Embedded newsgroups? Let us know! https://www.windowsembeddedeval.com/community/newsgroups This posting is provided "AS IS" with no warranties, and confers no rights. Tag: not able to generate event from the driver Tag: 68793
  - 4
    - Recommendations for a PAx277 CE5 Board? not Got a customer who requires SD RAM (SDIO is necessarily required) We are looking at using an XScale board with CE 5. We need to interface it to an I(squared) channel for external hw. We want a small footprint for the board. Cost is of course a consideration. Any suggestions? Thanks -- David Jones Senior Lecturer School of Electrical & Computer Engineering RMIT University +61 3 99255318 Tag: not able to generate event from the driver Tag: 68791
  - 5
    - CE debugging very slow with HyperThread host I have a host pc that I am using for my PB development. (5.0) I find that if I enable HT in the BIOS, my debug process is very slow. If I disable HT in the BIOS, it seems to be normal speed. Is this expected? I would prefer to leave the HT on as it helps to enhance my overall development experiece. Thanks, Chuck Tag: not able to generate event from the driver Tag: 68785
  - 6
    - command line build Can someone tell me how to build the dcom samples in the CCM folder for CE5 I can not find any info on how to build samples from the command line Thanks Ken Tag: not able to generate event from the driver Tag: 68780
  - 7
    - USB & KITL Hi, I am successfully downloading images using eboot via ethernet with PB 5.0 connectivity options to download=ethernet transport=ethernet. However, I want to configure PB to use USB for KITL once the image is downloaded. So I configured PB 5.0 connectivity options to download=ethernet transport=USB. But then when "connect to device" is hit, I get errors "Failed to connect debug message service! Please check the transport settings.". I would have thought that PB would still wait for bootme and download the image and only attempt KITL (via USB) once the image has downloaded? Or am I missing what is happen here. Thanks, Stewart Tag: not able to generate event from the driver Tag: 68772
  - 8
    - Problem with Flash Media Driver Hai All, I am working on a ARM based device with WinCE5.0 My board contains 32 MB onboard strata flash and 64MB SDRAM. My problem is a strange one, I hope so. I build Strata Flash Drivar sample available in PB. I am Succefully loaded my FMDriver and able to create a partition and format,read and write into it. This all happens, When I write the image into SDRAM. If I check the "write image to Flash" from PB build options I could able to load the driver, but Neither I can create partition nor format the flash. I can see the Flash media Object in storage manager application tool. If I try to format it, The device hangs. No further response. can anybody help in this regard? thanks in advance with regards Vijji Tag: not able to generate event from the driver Tag: 68770
  - 9
    - MAPI in WINCE 4.2 or later? Is MAPI in WINCE 4.2 or later? If not what do I use instead to send email from an app. MsgStore is there with an app interface but I believe that became obsolete long ago. Tag: not able to generate event from the driver Tag: 68767
  - 10
    - problem with CEPC Iam trying to download VOIP image into CEPC via ethernet connection. When iam trying to dial,iam getting the dial tone but IAam unable to make the call. It is giving the following message: "MEDIA SESSION DOES NOT EXIST" which is creating this problem??? Tag: not able to generate event from the driver Tag: 68766
  - 11
    - Can't get to WWW Hello I used dial-up to connect the GPRS service. The GPRS module is a virtual COM port via USB. It connected to OTG device. It can get to connected state.But it can't link to WWW or MSN. If I switch module to the other USB host.(Not via OTG) It can dial-up and link to WWW. Did someone know about this problem? Thanks for help. Tag: not able to generate event from the driver Tag: 68764
  - 12
    - Migrating WINCE 4.20 to WINCE 5.00 on OMAP1510 platorm Hi All I am o trying to migrate BSP for Windows CE 4.20 to Windows CE 5.0 on Innovator OMAP1510 HW platform. I am also facing the same problem as the the one Vadivel described in the discussion forum in his post With WINCE4.2 image is coming perfectly with the BSP,same BSP I used after incorporating changes as per microsoft help http://msdn.microsoft.com/library/default.asp?url=/library/en-us/wcehardware5/html/wce50conbspanddrivermigration.asp I have followed the steps for migrating BSP from 4.2 to 5.0,but I built the image using Macallan and try to down load the image into OMAP1510 hardware I. found after putting couple debug statements ("<Drive name>:\WINCE500\Private\WINCEOS\COREOS\NK\KERNEL\schedule.c" and Drive name>:\WINCE500\Private\WINCEOS\COREOS\NK\KERNEL\kwin32.c") it is not able to execute fitst thread It means not going to SystemStartupFunc() Pls see the debug list 1 I tested timer ISR which is responsible for system tick by putting debug statements in OEMInterruptHandler(in Intc of BSP) and SysTimerInterruptHandler( Ter.cp of BSP) functions and it is working fine . I am attaching the debug output from serial output below. pls see the DEBUGLIST II DEBUGLIST I Ethernet Boot-Loader for the Texas Instruments OMAP EVM. Build date: Nov 14 2002 at 12:23:53 Copyright (c) 2000 - 2002, Texas Instruments, Inc. Portions copyright (c) 1995-2000 Microsoft Corporation. EBOOT: Moving exception handlers from 0x84014DFC to 0x8802D000. EBOOT: Calling OEMInit. EBOOT: Initializing LAN9000 hardware. +SMCInit SMC card not detected, I/O base 0xA2000300, BSR: 0x0000FFFF EBOOT: Could not find LAN9000 hardware. EBOOT: Jumping directly to 0x40000 EBOOT: Jumping to image at 0x40000... EBOOT: Leaving main(). OEMInitDebugSerial: KITL initialization failed. Windows CE Kernel for ARM (Thumb Enabled) Built on May 16 2005 at 16:56:07 ProcessorType=0925 Revision=2 sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 80041038 RelocInit: Relocating 580 bytes of SDRAM functions. RelocInit: Relocating 184 bytes of ISRAM functions. g_pSetEMIFFastRegs=0xa802f004. OEMInit is done!!! by Vadivel Booting Windows CE version 5.00 for (ARM) Booting kernel with existing memory configuration: Memory Sections: [0] : start: 84070000, extension: 00002000, length: 01d8e000 Sp=ffffc7cc ARMInit done. SchdInit....Starts.....(!@#$%^&*)... Scheduler: Start openexecutable 'nk.exe' ldr:OpenExe: nk.exe OpenExecutable: Filesys not loaded, Opening from ROM OpenFileFromROM:found ldr: OpenExecutable is done Updated eptr->e32_vsize to = 00048000 Scheduler: openexecutable 'nk.exe' sucess Scheduler: dovirtualAlloc is done Sched: pStak:c2010000, pCurProc->e32.e32_stackmax :00010000 MDCT: MDCreateThread starts.. MDCT: MDCreateThread end.. DEBUGLIST II Ethernet Boot-Loader for the Texas Instruments OMAP EVM. Build date: Nov 14 2002 at 12:23:53 Copyright (c) 2000 - 2002, Texas Instruments, Inc. Portions copyright (c) 1995-2000 Microsoft Corporation. EBOOT: Moving exception handlers from 0x84014DFC to 0x8802D000. EBOOT: Calling OEMInit. EBOOT: Initializing LAN9000 hardware. +SMCInit SMC card not detected, I/O base 0xA2000300, BSR: 0x0000FFFF EBOOT: Could not find LAN9000 hardware. EBOOT: Jumping directly to 0x40000 EBOOT: Jumping to image at 0x40000... EBOOT: Leaving main(). Windows CE Kernel for ARM (Thumb Enabled) Built on May 6 2005 at 15:26:11 ProcessorType=0925 Revision=2 sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 80041038 RelocInit: Relocating 580 bytes of SDRAM functions. RelocInit: Relocating 184 bytes of ISRAM functions. g_pSetEMIFFastRegs=0xa802f004. OEMInit is done!!! by Vadivel Booting Windows CE version 5.00 for (ARM) Booting kernel with existing memory configuration: Memory Sections: [0] : start: 84070000, extension: 00002000, length: 01d8e000 Sp=ffffc7cc ARMInit done. Intc: OEMInterruptHandler(): ~~...INTC_IRQ_TIMER1...~~ = Timer: !fIntrTime Timer: SysTimerInterruptHandler done.. Intc: OEMInterruptHandler(): ~~...INTC_IRQ_TIMER1...~~ = Timer: !fIntrTime Timer: SysTimerInterruptHandler done.. Intc: OEMInterruptHandler(): ~~...INTC_IRQ_TIMER1...~~ = Timer: !fIntrTime Timer: SysTimerInterruptHandler done.. Intc: OEMInterruptHandler(): ~~...INTC_IRQ_TIMER1...~~ = Timer: !fIntrTime Tag: not able to generate event from the driver Tag: 68763
  - 13
    - WinCE buid process Hi all, The Cebuild.bat will perform build and sysgen for all the trees specified by the _DEPTREES environment variable . The sysgen is performed twice , known as 'preproc sysgen' and 'postproc sysgen' for each tree . I couldn't understand what happens in these two stages . Can anybody help me out in this . Thanks and Regards, Vidya Udupa. Tag: not able to generate event from the driver Tag: 68758
  - 14
    - CEPC stuck at DHCP Hi all, I tried to create a CEPC platform based on an old Pentium 3 PC with a 3Com 3c90x Ethernet interface. I had used the CEPCBOOT.144 utility to create the boot diskette. The PC was booted up with the default config.sys/autoexec.bat options. The ethernet interface was correctly identified by loadcepc as a 3Com 3c90x ethernet interface but eboot.bin failed in trying to obtain an IP address via DHCP with the message: ProcessDHCP()::DHCP_INIT I sniffed the ethernet interface to verify that the CEPC was not sending out any packets at all. I had also tried to assign a static IP address to see if the CEPC would contact my development machine with BOOTME requests. Again, I did not detect any packets coming from the CEPC. Does anyone know what could be the problem? Tag: not able to generate event from the driver Tag: 68755
  - 15
    - routing audio in bluetooth what things i've to do in " windows-CE platform builder" to build a operating system that will be able to route audio on ECM_5616 board ? if you cann't answer specificaly about this board(ecm),please sugest about the general way to write a application which can do audio routing for bluetooth in windows ce Tag: not able to generate event from the driver Tag: 68754
  - 16
    - audio routing in bluetooth what things i've to do in " windows-CE platform builder" to build a operating system that will be able to route audio on ECM_5616 board ? if you cann't answer specificaly about this board(ecm),please sugest about the general way to write a application which can do audio routing for bluetooth in windows ce Tag: not able to generate event from the driver Tag: 68753
  - 17
    - Audio problem in VOIP application we have INTEL ECM 5616 board and we included Intel 81XAC97 audio driver. We downloaded the VOIP application to the board via serial port. We are able to make the call from emulator to Board but audio in ECM receiver is playing fast and the board is not at all transmitting the audio. Thank u... Tag: not able to generate event from the driver Tag: 68750
  - 18
    - Driver Load Sequence Hi, I need to dynamically load and un-load drivers from Platform Builder to deal with a problem that i have explained below. Can someone tell me how to do any of these two things: 1- Tell WinCE to load my ftdi_ser.dll (a third party dll for ftdiâ??s serial over USB chip) after loading every other dll at boot time. (note platform.reg "order" doenst work in this case). 2- Un-load and re-load the ftdi_ser.dll after completion of the boot up either from the Platform Builder environment or programmatically. The problem is that the ftdi-ser.dll driver behaves differently if WinCE is started with the external ftdi device attached to the USB port: Normal operation: If I boot up WinCE and then plug in a serial over usb device into the WinCE deviceâ??s USB port, the external device is detected by the OHCI.dll and its driver FTDI_SER.DLL gets loaded after Wince loads the OHCI.dll and it then operates normally i.e. I can plug the device in and then un-plug the device and re-plug and re-establish serial comms over the USB all normally. Abnormal operation: If I boot up WinCE with the external USB device attached to the USB port already, the FTDI_SER.DLL still gets loaded but USB doesnâ??t function also the FTDI+_SER.DLL does not get un-loaded when I detach the external device from the USB port. There are also other symptoms, in the registry viewer i can see under /Drivers/Builtin/Active that the FTDI_SER.DLL doesnâ??t get un-loaded and re-enumerated as it is the case under Normal Operation. As a solution, I must tell WinCE to load FTDI_SER.DLL after loading all other dlls. Or as a workaround I could get WinCE to un-load the FTDI_SER.dll after loading all the dlls and then re-load it again. Thanks and regards, EZ Tag: not able to generate event from the driver Tag: 68745
  - 19
    - NDISWAN IM Driver Hi, I'm trying to debug an NDIS IM driver that binds to the AsyncMac miniport. (I know, I know, MS doesn't support this, etc.) When I compile the driver in eVC, it links just fine. When I compile it under Platform Builder 4.2, I get a link error - it can't link with the export function WanMiniportSend that is defined in ndis.h. Can anyone tell me what I have to do in Platform Builder to link to this function? Tag: not able to generate event from the driver Tag: 68735
  - 20
    - How to convert absolute mouse coordinates to normal positions relative a window? Hi, I´m trying to prevent some mouse messages to be forwarded to some applications, but the mouse driver gives me the absolute mouse coordinates. How could I convert them to screen coordinates? Thanks for helping me out, Dani Tag: not able to generate event from the driver Tag: 68729
  - 21
    - CE 5.0 Defrag tool Whenever I run the CE 5.0 Defrag tool on an IDE drive (256 MB CF), it never completes and must be aborted by closing the Defrag window. When I subsequently run scandisk on the drive, it finds numerous Invalid files and Lost cluster chains. Is there a bug in the defrag tool (one has been reported for scandisk)? Is the drive too big or incompatible? I would appreciate hearing from others who use these tools. Thanks Tag: not able to generate event from the driver Tag: 68708
  - 22
    - StorageManager Flags I am interested in the effect of various Storage Manager flag settings and have searched for documentation in PB and on-line. The only description that I can find for them are comments in Common.reg and they tend to be quite terse. Does anyone know where to find more complete documentation? If not, has anyone used the FATFS_VERIFY_WRITES flag setting? We have experienced occasional compact flash file corruptions and wonder if setting this would improve things. I assume that this setting would force file verification on writes but it is not clear how much time this would add or what would happen if verification failed. Tag: not able to generate event from the driver Tag: 68700
  - 23
    - Cesysgen.bat question Hi, In PB4.1 the cesysgen.bat file in PROJECTROOT\Oak\Misc was big with lots of checks on what SYSGEN_xxx variables were set. Now in PB 5.0 all this file contains is call PUBLICROOT\cebase\oak\misc\cesysgen.bat which does not have all the settings the cesysgen.bat file in 4.1 had. Where have all these checks been moved? Regards ms Tag: not able to generate event from the driver Tag: 68698
  - 24
    - How to Connect PXA255 pin to Harddisk pin with DMA mode hi,all I have implement communication between PXA255 and Harddisk with IO mode, but I find the data flow speed of the communication between PXA255 and Harddisk with IO mode is too slow, I would like to implement communication between PXA255 and Harddisk with DMA mode£¬At the same time I meet a problem, I find that the PXA255 only have the DMA Request Pin and lack the DMA acknowledged Pin in accordance with the Harddisk Acknowledged Pin. who can tell me how to simulate the DMA acknowledged Pin and how to simulate the DMA acknowledged Pin. thanks in advance Tag: not able to generate event from the driver Tag: 68697
  - 25
    - [wince5][plattformbuilder] Hi All, i use for development a opteron based and a p4 with em64t machine with winxp64, now i would to update from ce4.2 to 5. after may failed installs i enabled the logfile for the installer and found that the vmm.sys driver was failed. vmm.sys is part of the visual machine monitor (visual server 2005) and is needed for the emulator but can't be installed on a 64bit windows. i don't need the emulator but even without the installer fails. so is there a way to install ce5 on 64bit windows? or can i disable the installation of the emulator component. -- Regards Soeren Tag: not able to generate event from the driver Tag: 68696
- Next
  - 1
    - Maybe a Bug in wince500, please help to handle it. Hi: I am using wince500 with PB,and new a platform with the choices are : Interl 27x mainstoneII BSP,Mobile Handheld. And I also definitely believe that build and sysgen are all successful.(there are only some warnings after build and sysgen). After I new a project, and make a choice of Dynamic Link Library and An empty project, then I click "finish", the system report " New Project Wizard encountered an error while auto-generating the project.please try again".I have ever successfully created a project which can create a dll file, but this time , it's wrong here. Please help to solve it , is it a bug? Tag: not able to generate event from the driver Tag: 68695
  - 2
    - about usb bulk transfer problem.. Dear all, I've developed a usb host client driver for my modem device. In more detail, it is a usb cdc acm driver. My driver follows stream driver model and creates a COM port for modem use. Then, I write a http client application to test my driver. When getting small-size file (<100KByte), it can download successfully. If the application gets big-size file(>1000KByte), the driver runs for a while and stops. So, the usb bulk transfer is halt and do nothing. Could someone tell me why? Thanks!! PS: My OS is WinCE.NET 4.2; HW is Xsale EVM. -Kemin Tag: not able to generate event from the driver Tag: 68694
  - 3
    - Adding Raster Font support in WINCE 4.2 Hi, I am adding the Raster Support for my WinCE 4.2 OS. I added the Raster Font Support in my OS module and built it. But, I am not able to remove the Tahoma (Default system font) module. When i load the OS in my Target, it is crashing at GWES load. One more point i read in help that I can't use both Raster and TTF in the same OS image. But, to make my OS image for Raster ONLY support i tried to remove the Tahoma, but couldn't ftom the image. Why ? "Tahoma is taken as default font and couldn't remove" was the message i got. I couldn't get any help related to "How to add Raster support in WInCE 4.2 ?" Please help me out to get WinCE 4.2 with Raster Font support. Thanks & Regards, Peter Tag: not able to generate event from the driver Tag: 68693
  - 4
    - IDE FIFO disabling i want to disable the FIFO in my IDE driver in winCE5.0 can anyone plz help me by telling what to do to disable the FIFO and where to do the changes? waiting eagerly for the reply...... sabya Tag: not able to generate event from the driver Tag: 68691
  - 5
    - problem in buiding VOIP phone hi, Iam trying to test voice call between emulator and ECM board. When i tried in release mode,Iam able to make call from emulator to ECM but voice is transmitting form emulator to ECM only that too not clear,its not workin in viceversa. In debug mode,its not workin at all.It is giving exception in "efilter.c" Iam so thankful if anybody can help me ... Tag: not able to generate event from the driver Tag: 68689
  - 6
    - ANN: Reminder: Two CE-related public chats this week Just a note that there are a couple of online chats coming up this week concerning Windows CE 5.0. Members of the development team will be on hand ready to answer your questions, so bring 'em on! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Title: Windows CE 5.0 Live Chat! May 25, 2005 9:00 - 10:00 A.M. Pacific time Additional Time Zones: http://www.timeanddate.com/worldclock/fixedtime.html?year=2005&month=5&day=25&hour=9&min=0&sec=0&p1=234 Do you have tough technical questions regarding Windows CE 5.0 for which you're seeking answers? Do you want to tap into the deep knowledge of the talented Microsoft Embedded Devices Group members? If so, please join us for a live Windows CE 5.0 chat and bring on the questions! Windows CE 5.0 is the operating system that is powering the next generation of 32-bit, small-footprint and mobile devices. This chat will cover the tools and technologies used to develop devices using the Windows CE 5.0 operating system. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Platform Builder Documentation: Live chat with writers May 26, 2005 10:00 - 11:00 A.M. Pacific time Additional Time Zones: http://www.timeanddate.com/worldclock/fixedtime.html?year=2005&month=5&day=26&hour=10&min=0&sec=0&p1=234 Do you have suggestions about how the Platform Builder documentation can be improved to make your work easier? Take this opportunity to chat with Platform Builder documentation experts - including Celeste De Guzman, Court Faw, and Luke Bayler - about what you need from the documentation that they write for you. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~-- To join either of these chats, please log on via the main MSDN chat page at: http://msdn.microsoft.com/chats -- Thanks! Michael Fosmire MVP Lead, Windows Embedded This posting is provided AS IS with no warranties, and confers no rights. Tag: not able to generate event from the driver Tag: 68678
  - 7
    - directory / filesystem structure Hi, I'm relatively new to platform builder for CE 5.0 and need a little guidance here. When i'm building my platform I first modify the FILES section in project.bib and then copy them to a more robust structure that I outline in project.dat. I'm just wondering if there's a preffered way of doing this because I need to copy a large directory structure over to my device and this method leaves a copy of each file in \windows (in ROM??) and also puts the files in the robust directories (ie \myDir\a) as well. I like the files to be moved into the other locations but the documentation suggests that this isn't possible. Thanks in advance, Steve .. as a side note, in platform builder for CE 4.2 I used to be able to preprocessor definitions, is that gone or moved in platbuilder 5? Tag: not able to generate event from the driver Tag: 68664
  - 8
    - boot problem when not connected to PB Hello everybody, I have a system that only runs when platform builder is connected. I enabled 'building for flash image' in the platform settings in order to let it boot standalone. This configuration still works. When I disable 'CE target control support' and 'Kernel debugger' it doesn't boot up anymore. What reason could there be that it does not run with these settings? Please, any help is appreciated. TIA, ole Tag: not able to generate event from the driver Tag: 68655
  - 9
    - build environment Hi All, I am thinking about a build environment for a development I am doing using WinCE5.0 We are having to develop a BSP, Platform and then write maybe a dozen modules that will run on the device. I will be automating the build process which will (I think) Get all the source from CVS Build The BSP. Build the workspace. Build the modules. Build the documentation. Now, I am a bit new to Platform builder but I am looking for a way to build a BSP out of the default WinCE500 folder. Is it possible? I tried to clone one and specify my build directory rather than the default WinCE500 folder but It doesn't seem to let me define the PLATFORM/MyPlatform folder to be anywhere other than WINCE500. Does it's internal build process insist that your PLATFORM is defined within the WINCE500 tree? Is this because of the relative location of the 'Public', 'others' and 'CRC' folders? Has anyone tried to do this?' Nick Tag: not able to generate event from the driver Tag: 68647
  - 10
    - trapping NULL pointer dereference We are using structured exception handling (SEH) at a very high level to trap hardware signals like divide-by-zero and dereferencing a NULL pointer. Apparently Microsoft accomplishes this by trapping the hardware signals at a very low level and then throwing them as SEH exceptions. Unfortunately if we use SEH, we must turn off stack unwinding /GX, which limits our use of C++ exception handling. Also, apparently there is either a compiler extension -- or bug -- that allows hardware signals to be caught using catch(...) when building with Visual C++6. However, our experiments show that this DOES NOT work on WinCE apps built with EVC. Any experience with this? Essentially the problem is that we can not allow the screen (app) to just freeze if there is a bug in the code like divide-by-zero or dereferencing a NULL pointer. They want to be able to display some kind of message to the user instead of the screen just freezing. So, is there any other way besides using SEH to trap hardware signals? Maybe something we can do in the BSP? I'd really like to be able to use C++ exception handling. Also, do you know what the performance hit would be if we were able to turn on stack unwinding? Andy Tag: not able to generate event from the driver Tag: 68642
  - 11
    - Suspend problem in wince4.2 image Dear all, I have developed WinCE.NET 4.2 OS image for the configuration of CEPC X86 with the mode of Internet Appliance. Problem in suspending this os image. After selecting "Suspend" in start menu, it does not react. It is in normal mode. what can i do to suspend or restart my OS image?. please help to solve this problem. Thanks & Regards, V.Veerasivakumar -- V.Veerasivakumar InLott Technologies Pvt Ltd, Chennai, India. E-Mail: veerasivakumar@inlott.com Tag: not able to generate event from the driver Tag: 68640
  - 12
    - Problem with MiniportInitialize NDIS IM Hi I am trying to make an NDIS IM driver that hooks up to the IRDA. The problem that i am facing is that if I include the following lines of code in MiniportInitialize, the device hangs and i have to Hard Reset it. As a result any log file i am creating is removed. I tried creating the log file on the CF card (using simple fopen), but somehow the log file is not created only. The MiniportInitialize function is as under NDIS_STATUS MiniportInitialize( OUT PNDIS_STATUS OpenErrorStatus, OUT PUINT SelectedMediumIndex, IN PNDIS_MEDIUM MediumArray, IN UINT MediumArraySize, IN NDIS_HANDLE MiniportAdapterHandle, IN NDIS_HANDLE WrapperConfigurationContext ) { BINDING *pBinding; NDIS_STATUS status; PVOID *portOffset; NDIS_MEDIUM medium; UINT i; WrToLog("Inside Miniport Initialize",strlen("Inside Miniport Initialize")); pBinding = NdisIMGetDeviceContext(MiniportAdapterHandle); WrToLog("After NdisIMGetDeviceContext",strlen("After NdisIMGetDeviceContext")); //Problem code begins medium = pBinding->medium; if (medium == NdisMediumWan) medium = NdisMedium802_3; for (i = 0; i < MediumArraySize; i++) { if (MediumArray[i] == medium) { *SelectedMediumIndex = i; break; } } if (i == MediumArraySize) { status = NDIS_STATUS_UNSUPPORTED_MEDIA; return status; } //Problem code ends pBinding->hMPBinding=MiniportAdapterHandle; NdisInterlockedIncrement(&pBinding->nRef); NdisMSetAttributesEx(MiniportAdapterHandle, pBinding, 0, NDIS_ATTRIBUTE_IGNORE_PACKET_TIMEOUT | NDIS_ATTRIBUTE_IGNORE_REQUEST_TIMEOUT | NDIS_ATTRIBUTE_INTERMEDIATE_DRIVER | NDIS_ATTRIBUTE_DESERIALIZE | NDIS_ATTRIBUTE_NO_HALT_ON_SUSPEND, 0); pBinding->statusLastIndicated = NDIS_STATUS_MEDIA_CONNECT; pBinding->MPDeviceState = NdisDeviceStateD0; pBinding->PTDeviceState = NdisDeviceStateD0; status = NDIS_STATUS_SUCCESS; pBinding->bMiniportInitPending = FALSE; NdisSetEvent(&pBinding->hEvent); // The ProtocolBindAdapter is waiting for this in the CleanUp code WrToLog("Returning from Miniport Initialize", strlen("Returning from Miniport Initialize")); return status; } If i comment out the problamatic code, then the driver is loaded in the device and the MiniportInitialize is called as a result of the call to NdisIMInitializeDeviceInstanceEx in the ProtocolBindAdapter. I have called NdisOpenAdapter before this and also have made the necessary registry entries. But after the 'Returning from Miniport Initialize' is written to the log file, meaning that the MiniportInitialize has returned, any subsequent log entries that i make in the ProtocolBindAdapter are not written to the log file. Could someone pls tell me what am I doing wrong. Any help would be gladly appreciated. Thanks Regards Madhur Nagar Tag: not able to generate event from the driver Tag: 68638
  - 13
    - Problem With Hive on OnBoard Flash Hello All, I am using StrataD sample for saving hives on my on board Flash. My target board has a ARM based processor with INTEL Strata J Flash, 32 MB Paired Flash, 64 MB RAM. The NOR Flash driver fails with "Invalid Manufacturer Code". Here are the registry entries i used: [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\StrataD] "Dll"="stratad.dll" "Order"=dword:0 "Prefix"="DSK" "Ioctl"=dword:4 "Profile"="MSFlash" "IClass"="{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" "MemBase"=dword:A0200000 "MemLen"=dword:02000000 "Index"=dword:1 "SectorSize"=dword:200 "IsPairedFlash"=dword:1 Here is the CFI dump: 0x0098 0x0090 0xffff 0xffff 0xffff 0xffff 0xfffd 0xffff 0xffff 0xffff 0xbfff 0xffff 0xffff 0xffff 0xfeff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0x4345 0x4345 0xc2a0 0x818a 0xc2a0 0x016a 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xdfff 0xffff 0xf7ff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xff7f 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xfffd 0xffff 0xbfff 0xffff 0xfffb 0xffff 0xffff 0xffff 0xfffd 0xffff 0xfbff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xfffd 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffef 0xffff I am reading the CFI dump code when it fails to read manufacturer code. The manufacturer code should be 0x089 but it is 0x098. Is there any thing i need to change from big-endian to little endian or vice-versa. Any pointers or suggestion would help me. ThanX in Advance, Regards, Vijay Tag: not able to generate event from the driver Tag: 68636
  - 14
    - bootloader hi, we are developing a bootloader,as of now we are not bothered about kernel. we are trying to initialize our target board and to make led blink. for this, in our boot.bib file modules section what is the need for us to specify nk.exe. the modules section of our boot.bib file looks like thisMODULES ; Name Path Memory Type ; -------------- ------------------------------------------------------- eboot.exe (_TARGETPLATROOT)\target\$(_TGTCPU)\$(WINCEDEBUG)\eboot.exe EBOOT please specify whether it is correct or i have to specify nk.exe even though i am not using kernel.even if i specify like this my boot loader is buit correctly and binary image is produced. Tag: not able to generate event from the driver Tag: 68635
  - 15
    - bootloader sir, we are developing ebootloader for osk5912 board .our board has the following memory configurations. TWO 16 MB Flash : 0C000000 t0 0CFFFFFF 0D000000 t0 0DFFFFFF 32MB SDRAM : 10000000 t0 11FFFFFF please specify how our boot.bib should be,also since we have two flash chips of 16 MB 16 bit width please specify what our ROMSIZE & ROMWIDTH should be. thankyou, kesavan Tag: not able to generate event from the driver Tag: 68634
  - 16
    - OpenExecutable what it does in windows ce5.0 Please can you tell me what it does the following function does? OpenExecutable (L"nk.exe", &pCurProc->oe, 0, 0) Tag: not able to generate event from the driver Tag: 68633
  - 17
    - error when building platform :"could not find file ms2_serial.dll on disk" Hi: I use wince50 with PB. First, I new a platform in PBWorkspace directory,and select Internet appliance,Intel 27X BSP; Second,I didn't drag anything from the catalog when I finish setup a new platform and choose sysgen and build directly. Thirdly , when it finished building, system report "could not find file 'G:\wince5000 PBWorkspces\TEST\RelDir\MAINSTONEII_ARMV4I_RElease\ms2_serial.dll'on disk" Who can tell me where the wrong lives? Tag: not able to generate event from the driver Tag: 68632
  - 18
    - File Sharing in 5.0 hi, Could anybody tell me what this NRC_IFAIL and NETBIOS: not an allowed interface is all about (refer to the debug output below)? The problem is that when the system boots up, i am able to access the system through remote configuration UI (using the device name 'box' as http://box/remoteadmn), but unless i go into the UI, set a password (which should be done anyways i guess) and only when i change the device name from "box" to something else and then select one of the available Adapters, i am able to access the shared folder. Without changing the name of the device i am not able to get to view/edit any other options in the UI. Find attached the debug output with all zones enabled, and the registry settings. It is configured as an IA device with File Server, File Server Customizable UI pulled in. == [HKEY_LOCAL_MACHINE\Services\SMBServer\shares] "UseAuthentication"=dword:1 [HKEY_LOCAL_MACHINE\Services\Smbserver] "AdapterList"="mac1;" ;one of the two available macs in the system. [HKEY_LOCAL_MACHINE\Services\Smbserver\Shares\Root] "Path"="\\profiles" "Type"=dword:0 "UserList"="admin" [HKEY_LOCAL_MACHINE\Ident] "Name"="box" "OrigName"="WinDevice" == Debug mesg.: +SMB_Init SMB_SRV: Server GUID not specified in registry -- creating a new one 0x87b20cd0: SMB_SRV: Workgroup reg value not set -- using WORKGROUP 0x87b20cd0: SMB_SRV: Registering CName box Loading Share: Root 0x87b20cd0: SMB_PRINT: Loading Registry: Services\SMBServer\Shares\Root 0x87b20cd0: -- Type: 0 0x87b20cd0: -- Path: \profiles 0x87b20cd0: -- ACL: admin; 0x87b20cd0: -- NOT USING READ-ONLY ACL's! 0x87b20cd0: -- Read-ONLYACL: SMBSRV-CRACKER: cracker delay thread created 0x27a43d5a 0x87a66800: HTTPD: Initializing log files SMBSRV:Starting TCP transport SMBSRV:Starting NETBIOS transport 0x87b20cd0: NOTIFICATION::SystemEventToString::Unknown system event 13 0x87b20cd0: [NOTIFY] SetUserNotification (or replacing 00000000) 0x87b20cd0: [NOTIFY] SetUserNotification::Registring system watch: event 13 app \\.\Notifications\NamedEvents\SM 0x87a66800: SECUR32: Loading package DLL: 'schannel.dll'. 0x87a66800: SECUR32: Loading package DLL: 'ntlmssp.dll'. 0x87a66800: SECUR32: Loading package DLL: 'kerberos.dll'. 0x87a66800: SECUR32: Loading package DLL: 'spnego.dll'. 0x87a66800: SECUR32: Package [1] loaded -- 'Microsoft Unified Security Protocol Provider' 0x87a66800: SECUR32: Package [2] loaded -- 'Microsoft TLS 1.0' 0x87a66800: SECUR32: Package [3] loaded -- 'Microsoft SSL 3.0' 0x87a66800: SECUR32: Package [4] loaded -- 'Microsoft SSL 2.0' 0x87a66800: SECUR32: Package [5] loaded -- 'NTLM' 0x87a66800: SECUR32: Package [6] loaded -- 'Negotiate' 0x87a66800: SECUR32: Locating package 'NTLM' ... 0x87a66800: found (0x0004EAB0). SMBSRV:Initing NETBIOS LANA(1) NETBIOS: not an allowed interface -- this is okay, but might mean the adapter should be configured -- see docs SMBSRV:NetBIOSNotifyFunc SMBSRV: invalid LANA on context 3, maybe the IP isnt valid? SMBSRV:Initing NETBIOS LANA(0) SMBSRV:Netbios - NCB Error 2 SMBSRV:InitLana: NCBQUERYLANA returned NRC_IFAIL SMBSRV:Error initing lana(0)! SMBSRV:NetBIOSNotifyFunc -SMB_Init +RDR:NetBIOSNotifyFunc: Lana 1, flags: 0x3 +RDR:NetupIndication, lana 1 +RDR:BindToNet: lananum: 1 +RDR:BindToNetbiosTransport -RDR:BindToNet successful for lana 1 -RDR:NetBIOSNotifyFunc: Lana 1 +RDR:RdrUIThread starting == Tag: not able to generate event from the driver Tag: 68629
  - 19
    - How can I add a device driver to windows mobile 5.0? when i used AK to build a BSP, but some driver is not in BSP, I will add in it.how can I add a device driver to my BSP? thanks! Tag: not able to generate event from the driver Tag: 68625
  - 20
    - Disappearing the sandwatch in the center of screen. Dear all. I want to disappear the sandwatch in the center of screen. It is not a sandwatch of a mouse cursor. How can I do that? Thank you. Tag: not able to generate event from the driver Tag: 68624
  - 21
    - Disappearing the sandglass in the center of screen. Hi dear. I want to disappear the sandglass in the center of screen. It is different from the sandglass of a mouse cursor. How can I do that? Thank you. Tag: not able to generate event from the driver Tag: 68623
  - 22
    - how to partition SD card hi, I have a sd card in a wince42 system.now I want to partition it into two part,how to set registry to make it work?my setting : [HKEY_LOCAL_MACHINE\System\StorageManager] "Dll"="fsdmgr.dll" "PNPUnloadDelay"=dword:0 [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\sdmmcloader] "Dll"="sdmmc_loader.dll" "Prefix"="SML" "Order"=dword:2 "Ioctl"=dword:4 ; "FSD"="fatfs.dll" [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles] "AutoMount"=dword:1 "AutoPart"=dword:0 "AutoFormat"=dword:0 "PartitionDriver"="mspart.dll" ; @CESYSGEN IF CE_MODULES_SDMMC [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\SDMMC] "Name"="SD/MMC Card" "Folder"=LOC_STORE_PCMCIA_FOLDER "PartitionDriver"="mspart.dll" I just can see the card in the storage manager,but I can't partition it. and also the card work well,but how to part it? Tag: not able to generate event from the driver Tag: 68613
  - 23
    - InernetOptions Hi all, I'm doing enhancement to the IE addon where in I have to save the username and password(Proxy) before the IE launch..Though I have done coding to the registry sttings its not getting saved.Can any one help me? Thanks in Advance, Sadha Tag: not able to generate event from the driver Tag: 68598
  - 24
    - NDIS drivers conflict? Platform: x86 Version: 4.2 Description: Our platform support IrDA and USB Wireless LAN and use hive-based registry. First time boot up, system will prompt to input USB device driver name and both IrDA and wireless LAN works fine. But afeter system saved registry itself, the next time boot, one of them will not work. Sometime IrDA and sometime Wireless LAN. Just like they are exclusive. Can somebody give some hints? Thanks in advanced! Tag: not able to generate event from the driver Tag: 68597
  - 25
    - Serial mouse driver Hi, I believe there is a serial mouse driver on Windowsfordevices.com for CEPC. Is it a big job to adapt for PXA255 or reasonably straightforward. Tag: not able to generate event from the driver Tag: 68595

i have a CAN driver and trying to generate an event from the driver
but my setevent( ) is not setting any event . what can be the problem?

Top

Re: not able to generate event from the driver by Bruce

Bruce
Fri May 27 08:42:06 CDT 2005

We need more information than that

--
Bruce Eitman (eMVP)
Senior Engineer
beitman AT applieddata DOT net

Applied Data Systems
www.applieddata.net
An ISO 9001:2000 Registered Company
Microsoft WEP Gold-level Member

"sabya" <sabya@discussions.microsoft.com> wrote in message
news:8727E6D0-D123-4D34-97A3-FFD5CDA10F88@microsoft.com...
> i have a CAN driver and trying to generate an event from the driver
> but my setevent( ) is not setting any event . what can be the problem?

Top

Re: not able to generate event from the driver by Steve

Steve
Fri May 27 09:40:18 CDT 2005

Show us the code.

--
Steve Maillet
EmbeddedFusion
www.EmbeddedFusion.com
smaillet at EmbeddedFusion dot com

Top