Windows CE - Audio not working

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - TouchCalibrate I use PB 4.2 to build a Windows CE system for samsung2410 board. I use RAM-based file system. I want to save the touch screen calibration infomation in a file when user calibrate it. when user called TouchCalibrate() function. After calibartion, I save the registry key: HKEY_LOCAL_MACHINE\Hardware\Devicemap\Touch "CalibrationData"="***" to a file,And then, there some software can write the CalibrationData to registry from the file we have been saved. I found the registry had changed to the new value. But it didn't calibrate, i.e. the system didn't use the new calibration data from the registry. My problem is, how to let the system to use the calibration data from the registry? Is there any others things I forget to set?how can i do! Thanks in advance! Tag: Windows CE - Audio not working Tag: 86372
  - 2
    - Hot Swap Feature in WinCE5.0 Hello Everyone, Currently I am working on WincE5.0 MainstoneII\ARM\PXA270 for one of my custom image. Most of the peripherals like usb mouse, keyboard and sd card are working with plug and play but the hot swap feature is not working. As I am very new to WinCE can someone please help me to sort out this? Thanks in advance. Kind Regards, Sandeep Dagar Fujitsu-Siemens Computers. Tag: Windows CE - Audio not working Tag: 86371
  - 3
    - WinCE COM port APIs problem.... Its urgent..... I am working on an application which uses port redirection and i need to implement it for WinCE device. The APIs which i found not supported on WinCE are as follows: BuildCommDCB BuildCommDCBAndTimeouts GetDefaultCommConfig SetDefaultCommConfig CommConfigDialog GetCommConfig SetCommConfig can anyone suggest me some alternative APIs for the above APIs (which works on WinCE )or some way implement these APIs ??? All suggestions/solutions are most welcome.. Thanks, Ansh Tag: Windows CE - Audio not working Tag: 86368
  - 4
    - Advance Backlight in Control Panel problem If we open the "Display" item in the Control Panel, there are one tab named "Backlight", use "tab" key in the keypad to enter the "Backlight" tab, then the advbacklight.dll will be loaded, then again use "tab" key in the keypad to walk through inside the "Backlight" tab, when "timeout" item is chose, the advbacklight.dll will be unloaded (it is strange), after that, if you use "tab" key in the keypad to open the "Advance" button, then Prefetch Abort: Thread=8fe1e550 Proc=8a1af040 'CTLPNL.EXE'. Anyone has the same problem? Why the advbacklight.dll will be unloaded when "timeout" item is chose? I think it cause the abort. Tag: Windows CE - Audio not working Tag: 86366
  - 5
    - How to setup Remote NDIS USB Driver Kit under win2k? I download Remote NDIS USB Driver Kit from microsoft website,but how to setup it under win2k system? Tag: Windows CE - Audio not working Tag: 86362
  - 6
    - How to transfer the USB context to NDIS handler? Hi,all I'm porting a USB2Network Driver from Win2k to WinCE 5.0. I get the usb_handle from USBDeviceAttach. Then NdisRegisterAdapter is called to tell NDIS to create a new device instance. Now I have a problem. When I get the usb_handle from USBDeviceAttach and store it in a device context, how can i pass the device context to other NDIS functions? In other words, in the NDIS functions like SendHandler, how can i get USB handle and usb_funcs to implement USB transfer? Thanks a lot in advance! Any help will be highly appreciated! Tag: Windows CE - Audio not working Tag: 86361
  - 7
    - QFE Search not working anymore? I always searched for new QFE's using this link: http://www.microsoft.com/downloads/results.aspx?freetext=qfe%205.0&productID=&categoryId=&period=&sortCriteria=date&nr=50&DisplayLang=en&type=a That worked great, but now for some reason whenever I search for "qfe 5.0", "Windows CE 5.0", "5.0 Platform Builder" nothing returns any hits anymore. It only returns hits if I omit the "5.0" string, but then I get everything for 4.2 and older versions as well (which is really annoying). Anybody noticed this change in behavior of the MS web search tool? ...annoyed... -- Michel Verhagen, eMVP Embedded Fusion www.embeddedfusion.com mverhagen at embeddedfusion dot com Tag: Windows CE - Audio not working Tag: 86354
  - 8
    - How to order PB 5.0? We need to upgrade our 4.2 Platform Builder to 5.0, but I'll be darned if I can find it searching the Microsoft web site. We tried asking Arrow but they say there are 100 different versions! 1. Can anybody direct me to the correct MS web site page and/or a part number to use when ordering the 5.0 upgrade from Arrow? 2. Is there a cheaper upgrade from 4.2 to 5.0, rather than buying a virgin copy of 5.0? 3. Is the eMbedded Visual C++ product still available for CE 5.0? We very much need the native compiler for our project, rather than the Studio stuff. Thanks, Michael Schwab Tag: Windows CE - Audio not working Tag: 86349
  - 9
    - Windows CE driver for Prism wireless card Hi to all, i'm configuring a rugged PC. For creating the Win CE 5.0 OS i'm using the platform builder. Everything seems to work except the Prism wireless card, because i can't find the correct driver. Someone can help me? Where can I find it? I think the producer of the card is Funkwerk. Thanks everyone. Tag: Windows CE - Audio not working Tag: 86342
  - 10
    - "Image Size" VS "Data Abort" VS "Code Space Full" Dear Sir, I use PXA27X and WINCE 5.0 to develop my project. I always see the following message in Image compile time. Code space full, fixing up <XYZ-1.dll> to ram space Code space full, fixing up <XYZ-2.dll> to ram space ... As my understanding, The size of XIP is 32MB , and all of my project's DLL is more than 32MB. so the "Code Space Full" message will be displayed. But the size of my project's NK.bin is 31.75MB , it is closed to 32MB. Does the size of XIP and the size of NK.bin have any relation? Should I enable multiple XIP if I do NOT want to see "Code Space Full" message ? Beside, when I execute any AP (Word-Viewer , Image-Viewer ... ) , system will display "Data Abort" message. Does this error message have any relation with XIP or Image Size ? How to fix this issue ? In config.bib , I reserve 48MB for NK. Is the Size NOT enough for my system ? Does anyone have idea about this issue ? BR, dirwdirw.tw Tag: Windows CE - Audio not working Tag: 86341
  - 11
    - How can I make up a CT69000 driver? Hello, All: I have been met a problem with producing a nk.bin file, and, my nk.bin cannot start up after running loadcepc.exe, I have noticed its production document, I found its display monitor is CT69000, and platform builder's help document tells me that I have to ensure the VESA supported package were packeted into its BIOS. However, I've no idea with if there's VESA support, and following the steps from the microsoft's documents of platform builder, I have used vesatest.exe to test it, it shows there's 10 types of display modes is supported. And I have done a thousands of searches and found little about CT69000. Can anybody tell me where I can get the CT69000's winCE.net's driver? Thanks in advance! Tag: Windows CE - Audio not working Tag: 86336
  - 12
    - CE 4.2 & Media Player Full Screen issues Folks, We have a handheld device with no keyboard, there's 1 5-way toggle & volume buttons, we also have Media Player 9 as part of the OS image. If we switch MediaPlayer to play in "Full Screen" mode, it appears that we have no way of "escaping" out of it without cold booting the device. Is this expected behaviour or did we miss something and there is a way to get out of full screen mode ? tia P.S. An answer other than the response to the old joke "Doctor, it hurts when i do this" would be appreciated :-) Tag: Windows CE - Audio not working Tag: 86335
  - 13
    - HELP: using net command with XP shared folder. Strange TCP/IP behavior. Hello to all NG, specially to Paul that in old posts has give some suggests to similar problems. I've this situation: WinCE 4.2 on PXA255 with bluetooth dongle and TCP/IP services installed, without any Wi-Fi or ethernet device. First step: I've to map a network share on a desktop PC running 2000/XP or 2003 and Microsoft/Widcomm bluetooth stack. On WinCE I'm able to discovery BT devices, map SPP port of my XP desktop PC, create a new dial-up connection that use the mapped virtual COM port (set VCOM parameters as 115200,N,8,1), create on XP desktop PC an new incoming connection (RAS and Routing service is enabled automatically by OS) using COM6 (the BT incoming port on desktop PC) and connect WinCE. The connection works fine, XP desktop PC gives a qualified IP to WinCE (from the range specified on TCP/IP properties of Incoming Connection profile) and from WinCE I can ping XP desktop PC either via IP number (192.168.0.100) either via name (as desktop but also as desktop.fulldomain.org). Then I try net view \\desktop and after credentials window it works When I try net view \\desktop.fulldomain.org it gives error 87 "net use \\desktop\shared local" works fine and I exchange files. Why using extended domain name I get error 87? However if I ping server or desktop2 I get bad ip address. Only if I use full domain name, as server.fulldomain.org or desktop2.fulldomain.org, ping works fine (in my network I've a DNS server and XP RAS pass to WinCE this DNS Server IP address). Second step: the shared folder is on a server in the network, but WinCE must use the dialup connection with the nearest desktop PC (BT range is 15 meters and I can't plug the BT dongle on the server, why it's very far from WinCE device) that is connected via ethernet cable to the same server network. The problem now, once connected via dial-up with XP desktop PC, is that from WinCE I can ping the server using its IP address or full domain name, but if I try to use ping server or net view \\server or net view \\server.fulldomain.org it doesn't work and return error 87. What does error 87 means? Every other tool that use TCP/IP (ping, tracert, route) using full domain name is working fine, also internet explorer with http is working fine with full domain names. How does "net" command translate the name of the XP desktop PC? It seems that it doesn't use DNS server settings but tries another way to translate the name in IP address but without success. Do I need a WINS server in my network that translate the names for WinCE device, and specify WINS address into TCP/IP setting of dialup profile? Why net view/use works only with the shared folders of the desktop PC that WinCE dial-in, but I can access full network trought the same desktop PC? It seems that problem is not at TCP/IP level, but at "Folder and Printers sharing" service, or in the way that net command tries to resolve name. Why I can use net view \\desktop with success and net view \\desktop.fulldomain.org doesn't works? However \\desktop and \\desktop.fulldomain.org are translated to the same IP address by DNS server, so it really seems that net command doesn't use DNS then! What kind of mechanism does net command use for translating names? P.S.: net view \\ppp_peer return error 53, but ping ppp_peer works fine. Anybody can give me any suggest? Thanks Tag: Windows CE - Audio not working Tag: 86333
  - 14
    - Install File System Development Hi, I'm trying to make a private IFS in WinCE, and working with Platform Builder in emulated environment with RamDisk. I have successfully implemented a null file system and have verified that the MyFSD.dll was loaded and unloaded. But after that, I have tried to implement some of the functions that FSD should provide for FSD Manager. Two of them, MyFSD_MountDisk() and MyFSD_UnmountDisk were implemented and the .def file was properly modified for FSDMGR to know that. (below) EXPORTS MyFSD_MountDisk MyFSD_UnmountDisk FSD_MountDisk=MyFSD_MountDisk FSD_UnmountDisk=MyFSD_UnmountDisk MyFSD_... ....... After the implementation of the above, I was trying to see if the IFS was properly mounted, but found that the function MyFSD_MountDisk() was never called. DllMain() was called twice - DLL_PROCESS_ATTACH, DLL_PROCESS_DETACH. It was unloaded just after it was loaded. Does anyone can tell me any clue or suggestion? What should I do to mount a null file system? Do I have to change more of registery entries? Thanks in advance. Tag: Windows CE - Audio not working Tag: 86322
  - 15
    - OTG driver in PXA27x mainstone III DVK Hi, I am using Mainstone III DVK for developement and found that there are 2 USB OTG ports. However, I can't see any OTG driver/components in catalog. Do Platform Builder 5.0 and Mainstone III BSP provide any USB driver for our testing purpose? Thanks a lot. Best Regards, Tag: Windows CE - Audio not working Tag: 86317
  - 16
    - Does wince5.0 support Session Announcement Protocol (RFC2974) & Session Description Protocol (RFC2327) Hi,all. I have seen that the TAPI of wince5.0 is base on TAPI 2.0 & 2.1, but the SAP&SDP seem to be supported by TAPI 3.0 and later. So I don't quite sure that if wince 5.0 support SAP & SDP. If it does, which dll or component offers this? Walzer Tag: Windows CE - Audio not working Tag: 86314
  - 17
    - Does wince5.0 support Session Announcement Protocol (RFC2974) & Session Description Protocol (RFC2327) Hi,all. I have seen that the TAPI of wince5.0 is base on TAPI 2.0 & 2.1, but the SAP&SDP seem to be supported by TAPI 3.0 and later. So I don't quite sure that if wince 5.0 support SAP & SDP. If it does, which dll or component offers this? Walzer Tag: Windows CE - Audio not working Tag: 86313
  - 18
    - Does wince5.0 support Session Announcement Protocol (RFC2974) & Session Description Protocol (RFC2327) Hi,all. I have seen that the TAPI of wince5.0 is base on TAPI 2.0 & 2.1, but the SAP&SDP seem to be supported by TAPI 3.0 and later. So I don't quite sure that if wince 5.0 support SAP & SDP. If it does, which dll or component offers this? Walzer Tag: Windows CE - Audio not working Tag: 86312
  - 19
    - Compact Flash block size? Hi All, Does anyone know how to get the physical flash block size from a Compact Flash card? Without knowing the card manufacturer/flash/controller (etc) is there any way of enquiring this information from the card? Many thanks, Gordon. Tag: Windows CE - Audio not working Tag: 86305
  - 20
    - Question about Virtual memory limitations in WinCE Hi, While I was going through the code for the bootloader, it was mentioned that the virtual memory cannot be more than 512MB. Is this limitation because of winCE, which can handle only a maximum of 512MB physical memory. Or does it have any other reason? If we have to increase this limit, is there any possible way to do it. Warm Regards, Naveen Atmakuri. Tag: Windows CE - Audio not working Tag: 86301
  - 21
    - invalid handle returned from SD API Hi, I am trying to develop a SDIO device driver using Evc++. The target device is an imate PPC. I am not using platform builder, as i am not to use a development board, but just write a driver for the PPC device which has an OS already. My device has an SDBusdriver.dll So i am thinking that i should develop a host controller driver and a client driver. Initially i am doing an SD card Client Driver and will try to modify it from there.( Dont know if this is a good way to proceed) I am currently modifying the registry in the HKLM/Drivers/...../SDMemory_Class to replace the existing sdmemory.dll client driver with my own SD card driver called MySD.dll. I encountered the following problem in my driver code. in the xxx_init, i have called the SDGetDeviceHandle(param1,param2) API. I get the HKLM/...../SDMemory_Class path in the param2 variable and got a value for the handle returned by the API. I used the Remote tools from EVC++ and in remote registry editor i checked the active list of drivers. It showed one subkey as 'Hnd' and onemore subkey as 'ClientInfo'. The handle value got from the API is the same as the value in ClientInfo and not the one in Hnd.I expected the value to be the one in 'Hnd' and not the one in 'ClientInfo'. Is this a problem? if so how to correct it? Next, i called the SDRegisterClient(...) API with the handle returned by the SDGetDeviceHandle API as one of the parameters to SDRegisterClient. But this is causing an error, and the error code is 0xC0000006. I understand that this status implies an INVALID HANDLE. However, since the SDGetDeviceHandle API returned me the correct registry path, i think the handle must also be correct. I cant understand why the handle is invalid. I hope someone can help me out on this one. Thanks, Nag Tag: Windows CE - Audio not working Tag: 86299
  - 22
    - Bad response from PB to serial BOOTME request We're trying to implement a CE 5.0 serial bootloader for an ARM7-based target (we have no Ethernet and no USB). When trying to connect with PB, the target is reporting "received non-download packet type". A dump of the the received packet shows that the pktType field is 0xAA (KS_PKT_KITL). This is not one of the 3 packet types that RecvPacket() is expecting. All PB is doing is spitting out the following messages: The Kernel Debugger is waiting to connect with target. The Kernel Debugger has been disconnected successfully. What going on? Thanks, Scott Background info: Target CPU is an ARM7 in a custom ASIC. We are currently loading the code through a JTAG debugger. There is currently no way to flash the code on the board right now. The current target is a temporary interim device until our real target board is available. We've modified the CEPC SBOOT code to work with our hardware and have verified that the serial send and receive functions work. Debug messages (EdbgOutputDebugString(), etc.) are being routed throught the ARM7 DCC port using the semihosting support in our debugger. We're at the step where we're told to simply "Download the Eboot.bin file." Nowhere are we told how to accomplish this -- apparently newbies are just supposed to "magically know" how to do all of these things. We're assuming that PB's Target->Attach Device is the correct thing to do. PB's Target->Connectivity Options are set to Download=Serial, Transport=Serial, Debugger=KdStud (it defaulted that way and we haven't changed it). The serial settings for both Download and Transport match what our target is doing. The instructions so far have said to build the bootloader code using "build -c" command line. I've created a dummy project in PB using our platform that we created by cloning (since PB's Target->Attach Device menu item is grayed out unless you have a project open). Since there doesn't appear to be any way to change the location or name of the file being downloaded, we copied and renamed the test .bin file produced by "build -c" to the place PB wants to find it. The project has not been built since it won't (we're not that far along yet -- still trying to get the bootloader working). Sent boot req header: 6B 49 54 4C BB 00 24 00 67 9A Received response header: 6B 49 54 4C AA 70 20 00 71 FF Tag: Windows CE - Audio not working Tag: 86294
  - 23
    - Can a USB driver exposed functions like RS232 COM port? Hello Guys, I am writing a USB Device driver for a hand held device. Application software running on the device does not support USB, it only can make Serial COM port function calls. Can any one suggest me, how to write a USB driver which exposes functions like Serial COM port? Regards, Pranav Tag: Windows CE - Audio not working Tag: 86293
  - 24
    - Launch address of image Is the launch (start) address stored anywhere inside the image? I can derive things like physical start address an and size from the info in the stored image's TOC but I can't find where the launch address is stored. I know its available in the bin file as I can see it with the viewbin utility. I would like my bootloader to pull this info from a stored flash image. Is it possible? Tag: Windows CE - Audio not working Tag: 86286
  - 25
    - How to disable Wireless Zero Config On our WinCE 5.0 platform, we have a PCMCIA (actually CF) Prism2-based WiFi card. The built-in ISLP2 driver works fine with WZC, but we have our own WiFi connection manager that we would prefer to use. But if I disable WZC by unchecking its "Use Windows to configure my wireless settings" checkbox, my card doesn't seem to associate with AP's or get an IP, even though NDIS calls seem to indicate that I *am* associated nicely. If I enable WCZ, let it perform an initial association, and then disable it, then everything is good and my own wireless manager can happily associate and disssociate with AP's. Ideally, I would love to to totally remove WZC. But if I can't, then I would like it to be totally invisibile and unobtrusive. Is there a way to achieve this? -KB Tag: Windows CE - Audio not working Tag: 86282
- Next
  - 1
    - How do launch Remote Desktop Connection application on WinCE bootup? Hi, How do I auto launch Remote Desktop application (cetsc.exe) on WinCE bootup? I have added the following registry entry in platform.reg [HKEY_LOCAL_MACHINE\init] "Launch80"="cetsc.exe" "Depend80"=hex:14,00, 1e,00, 32,00 I get error message as parameter error. I see message "cetsc.exe started. Cmdline : '80' " It seems like from "LaunchXX" it takes XX as the command line argument. Any body can tell me what is going wrong? Thanks, Raghav Tag: Windows CE - Audio not working Tag: 86279
  - 2
    - ipod driver for wince 4.2? This may seem a strange question, but does anyone know whether there is a driver available for the ipod on wince 4.2. If not, does anyone have any idea what if any mods would need to be made to the usb system to handle loading a windows formatted ipod up as a usb mass storage device? Tag: Windows CE - Audio not working Tag: 86275
  - 3
    - Debug Message Format Hi all, I view the debug message in Platform Builder as showed below: 240503 PID:620e777a TID:81d0fa1a 0x81f91900: >>> Debug Message There are timestamps PID:number TID:number. But what does 0x81f91900 mean? Thanks in advanced, Brian Tag: Windows CE - Audio not working Tag: 86270
  - 4
    - Platform Builder 5 newbie question Hi! I can choose: Sysgen Build and Sysgen Build and Sysgen current BSP When do I choose each of these? Some experimenting shows that I have to do Sysgen the first time for a new platform, will Build and Sysgen current BSP suffice after that? Best regards, Fredrik Jansson Tag: Windows CE - Audio not working Tag: 86268
  - 5
    - Process Model "225bytes" in 2540N? Hi all, I read Windows CE Training Course 2540N and found one statement that I don't understand. It said (in Module 2-1): Virtual Address Slots 32 MB (225 bytes) of virtual address space per slot What does 255 bytes mean? Thanks in advanced, Brian Tag: Windows CE - Audio not working Tag: 86266
  - 6
    - How to let a thread be idle without using system call ? Hi, I do not want to call system call( ex: sleep) in our power handler functions. Without using system call, is there any other method to let thread be idle and release the CPU resource to other threads? Thanks. Yu. Tag: Windows CE - Audio not working Tag: 86250
  - 7
    - Power Handler function yield to low priority thread Hi, In our SD driver, I hope suspend/resume will not interrupt SD read/write. Hence, I wrote my code as following: ----------------------------------------------------------- Part 1: SD read/write code snippet EnterCriticalSection() // codes to read/write SD card LeaveCriticalSection() Part 2: SD power handler function DSK_PowerDown(void) { EnterCriticalSection() .... } DSK_PowerUp(void) { LeaveCriticalSection() .... } ----------------------------------------------------------- BUT, I found the following debug message: ERROR: Power Handler function yield to low priority thread. Is it a "ERROR"? Does it mean system is dangerous and unstable? How to solve this issue ? Thanks. Yu. Tag: Windows CE - Audio not working Tag: 86249
  - 8
    - CEPC with 1 GB RAM -> Backlink=0048 Hello, my Windows CE 5.0 image works well on all our CEPC x86 devices with up to 512 MByte Ram. For development reasons I would like to use a CEPC with 1GB RAM (I know this is not supported by Windows CE so I would like to use 512MB of the 1GB > only for development). If I boot my Windows CE 5.0 image on this CEPC I get a Backlink=0048 error. I do not know why it is not booting and using only 512MB RAM ... My OEMAddressTable: ; RAM 0x80000000 -> 0x00000000, size 512MByte dd 80000000h, 0, 20000000h ; Last entry, all zeros dd 0, 0, 0 In x86InitMemory I call IsDRAM with dwRAMAutoDetectSize=0x20000000: MainMemoryEndAddress += IsDRAM (MainMemoryEndAddress,g_dwRAMAutoDetectSize); (I have removed the if (MainMemoryEndAddress == g_dwRAMAutoDetectStart) ...) My Debug Output: 0 PID:0 TID:0 CEPC Firmware Init 0 PID:0 TID:0 RTC - Status Reg B - 0x02 0 PID:0 TID:0 g_dwCPUFeatures = a7e9f9bf 0 PID:0 TID:0 g_nMtrrCnt = 8 0 PID:0 TID:0 MTRR PhysMask0: 0000000fc0000800 0 PID:0 TID:0 MTRR PhysBase0: 0000000000000006 0 PID:0 TID:0 MTRR PhysMask1: 0000000ffff00800 0 PID:0 TID:0 MTRR PhysBase1: 000000003f700000 0 PID:0 TID:0 MTRR PhysMask2: 0000000fff800800 0 PID:0 TID:0 MTRR PhysBase2: 000000003f800000 0 PID:0 TID:0 MTRR PhysMask3: 0000000f00000000 0 PID:0 TID:0 MTRR PhysBase3: 0000000000000000 0 PID:0 TID:0 MTRR PhysMask4: 0000000f00000000 0 PID:0 TID:0 MTRR PhysBase4: 0000000000000000 0 PID:0 TID:0 MTRR PhysMask5: 0000000f00000000 0 PID:0 TID:0 MTRR PhysBase5: 0000000000000000 0 PID:0 TID:0 MTRR PhysMask6: 0000000f00000000 0 PID:0 TID:0 MTRR PhysBase6: 0000000000000000 0 PID:0 TID:0 MTRR PhysMask7: 0000000f00000000 0 PID:0 TID:0 MTRR PhysBase7: 0000000000000000 0 PID:0 TID:0 PhysMask0: 0000000fc0000800 0 PID:0 TID:0 PhysMask1: 0000000ffff00800 0 PID:0 TID:0 PhysMask2: 0000000fff800800 0 PID:0 TID:0 PhysMask3: 0000000f00000000 0 PID:0 TID:0 PhysMask4: 0000000f00000000 0 PID:0 TID:0 PhysMask5: 0000000f00000000 0 PID:0 TID:0 PhysMask6: 0000000f00000000 0 PID:0 TID:0 PhysMask7: 0000000f00000000 0 PID:0 TID:0 g_nMtrrInuse = 3 1 PID:0 TID:0 Double Fault -- backlink=0048 1 PID:0 TID:0 TSS=835973e0 EIP=80263cc8 Flags=00210086 1 PID:0 TID:0 Eax=00000000 Ebx=80241744 Ecx=03bb0045 Edx=00000000 1 PID:0 TID:0 Esi=c0020000 Edi=835b5780 Ebp=80241738 Esp=80241688 1 PID:0 TID:0 CS=0019 DS=0040 ES=0040 SS=0021 FS=0000 GS=0000 As mentioned above my image works well until I use 1GB RAM. Regards Peter Tag: Windows CE - Audio not working Tag: 86245
  - 9
    - CESH/Remote Tools and Account Permissions Hi, My Windows account is not an administrator, but rather a user. When I try to run any of the remote tools (remote registry editor for example) I get the following error: "The CESH Server for Windows CE reported the following error: Unable to establish a connection with the device. Please check server configuration settings." The error does not occur if I log into my machine using the administrator account. So I assume it is a permissions/privilege problem. Does anyone know what permissions/privileges need to change in order for the remote tools to work? I'm using CE5. Thanks, Chris P.S. Please don't just tell me to run as admin...that's a lame solution and should not be necessary. Tag: Windows CE - Audio not working Tag: 86236
  - 10
    - How do I get PB WinCE 4.2? Skinnable UI? I am trying to figure out the best way to give a Win CE 4.2 app an XP look and feel. I need to make the buttons appear with the XP skin. I have surfed the web and found that I need to employ the use of the SKINNABLEUI folder, but when I look for it on my device, it does not appear. What am I missing? Do I need to download something? Thanks. Tag: Windows CE - Audio not working Tag: 86228
  - 11
    - Viewing the catalog database In my \WINCE500\PUBLIC\COMMON\OAK\CATALOG\DATABASE directory I have two databases: pbdb.mdb and base_pddb.mdb. I assume that they contain the various list of SYSGEN's and corresponding descriptions. I would like to compile a list of these descriptions, but I can't open the database because it's password protected. (I don't know why it needs a password, but that's not the point of my post.) I can get a SYSGEN list from a command prompt, and I can get a list of component descriptions from the platform .log file, but there's nowhere that I can think of where I can get a list of corresponding SYSGEN's *and* their descriptions. Could someone who knows the DB password please email it to me? Or send me a way to extract the data from the DB? It would be much appreciated, and I would feel better about doing it this way than using one of the many Access password "recovery" tools out there. Best regards, Dan. Tag: Windows CE - Audio not working Tag: 86218
  - 12
    - Touch screen problem in CE50 I have installed DMC touch screen (TSC-10 USB controller) into evalue 5410 x86 PC with CE4.2 and it works fine. When I do the same (with updated driver from touchbase) in CE50 in evalue 3512 or 5510 it does not work USB mass storage, USB to serial converter and USB mouse works so USB drivers and functions are available in CE50 When I connect same touch screen device into CE42 PC it works, so touch screen HW and USB interface works Remote process viewer shows that device.exe loads TBUPDDCE.DLL at boot time and TBUPDDCEUSB.DLL when I connect the touch screen and unloads it when I disconnect the touch screen Everything looks good but there is no response for touching display in CE50 ????? Tag: Windows CE - Audio not working Tag: 86205
  - 13
    - Question about bootloader memory map Hi, I was going through the code for S3C2410 bootloader. In that first 8MB of memory is being mapped twice. Once from 0x30000000 to 0x80000000 and one is direct mapping. Is it mandatory to map this memory twice. If so, what is the reason. Ex: ; Comment: ; The following loop is to direct map RAM VA == PA. i.e. ; VA == 0x30XXXXXX => PA == 0x30XXXXXX for S3C2400 ; Fill in 8 entries to have a direct mapping for DRAM ; ldr r10, =PTs ; restore address of 1st level page table ldr r0, =PHYBASE Any leads in this reagard will be grateful. With Thanks and Regards, Naveen Atmakuri. Tag: Windows CE - Audio not working Tag: 86202
  - 14
    - Legacy driver in windows 5.0 Hi All, I am developing a pcmcia client driver in widows CE 5.0. Its . And am following the legacy method. From platform builder documnetation it sees that function CardMapWindow is obselete.If this function is obselete which function I have to use? Is it CardMapWindowPhysical? But when I tried to call the CardMapWindow from xxx_init of my driver it returned success. and I was able to read one of the register in my Card successfully. Strange thing is that CardMapWindow was not succes (returned NULL) when it was called from the xxx_open function of driver. Can any one help me to understand the problem? regards Bijesh VM Tag: Windows CE - Audio not working Tag: 86201
  - 15
    - NET CF 2.0 for PB Hello all, I'm trying to find the install for .NET Compact Framework 2.0 for Platform builder. I found Mike Hall's blog (http://blogs.msdn.com/mikehall/archive/2005/10/28/486358.aspx) where he describe howto download "Windows CE 5.0 Platform Builder Update 051027_KB904260" and install. But the link is broken. Now I've found this link to a download called .NET Compact Framework 2.0 Redistributable (http://www.microsoft.com/downloads/details.aspx?FamilyID=9655156b-356b-4a2c-857c-e62f50ae9a55&displaylang=en) and wondering is that the same? If not, does anybody know the link to download NET CF 2.0 to add to Platform builder. Best Wishes, Farek Tag: Windows CE - Audio not working Tag: 86196
  - 16
    - IP Conflict Problem Hi, When wince detect ip conflict, the ip will be changed to 0.0.0.0. Is any method can avoid this problem? I need the static ip address always turn on for some special situation. Thanks! BR, Hank Tag: Windows CE - Audio not working Tag: 86192
  - 17
    - Network issue windows CE 4.2 We have a custom platform very closely related to CEPC that has been in production and working well for some time now. It uses CE 4.2 and has QFEs up to and including Dec '05 applied. What we have discovered in our lab is that if the system is left idle for a long period of time (probably greater than one day) network connectivity is lost. Under the failure mode we can still "ping" the system but we are unable to use FTP or connect any of the TCP/IP devices that are peripheral to the main system. Note that even during the idle time our networked peripherals use a "keep alive" to test for the presence of the server. Also, in the failure mode the peripheral devices eventually (by design) attempt to BootP to resolve their loss of connectivity and this BootP also fails. The BootP server is on the CE device. Has anyone else experienced this or a similar issue? Sid. Tag: Windows CE - Audio not working Tag: 86185
  - 18
    - CETK Ellipse/RoundRect Has anyone had problems and resolved them in the CETK gdiapi tests for Ellipse (205) and RoundRect(215) in CE 5.0 ? I know they accept a percentage error, but I thought that if EmulateLine drew both copies, they would always be the same. My pxa255-based 5-6-5 16-bpp driver is failing about every third time on ~4 pixels which is above the .005% error for quater vga. Like I said, I thought the internal EmuldateLine would draw the exact same circle for my driver and ddi_test, but that evidently isn't true, but I can't seem to figure out why. Tag: Windows CE - Audio not working Tag: 86179
  - 19
    - GIISR question, Help me please The giisr dll is used to handle the sharded interrupt. Just like USB ( > 1 port ), PC Card ( > 1 port ).... Multiple SysIntr mapped to one IRQ. The procedure is 1. request Sysintr 2. loadintChainHandler 3. KernelLibIOControl 4. InterruptInitalize If the system interupts are 30, 31 and the IRQ is 19. Can I do this? SysIntr : 30 LoadIntChainHandler( L"GIISR_1.DLL", ..... ); KernelLibIOControl( ..., &GIISR_INFO_1, ....); SysIntr: 31 LoadIntChainHandler( L"GIISR_2.DLL", ..... ); KernelLibIOControl( ..., &GIISR_INFO_2, ....); Tag: Windows CE - Audio not working Tag: 86165
  - 20
    - Help!! GIISR Queston.. confuse me a long time The giisr dll is used to handle the sharded interrupt. Just like USB ( > 1 port ), PC Card ( > 1 port ).... Multiple SysIntr mapped to one IRQ. The procedure is 1. request Sysintr 2. loadintChainHandler 3. KernelLibIOControl 4. InterruptInitalize If the system interupts are 30, 31 and the IRQ is 19. Can I do this? SysIntr : 30 LoadIntChainHandler( L"GIISR_1.DLL", ..... ); KernelLibIOControl( ..., &GIISR_INFO_1, ....); SysIntr: 31 LoadIntChainHandler( L"GIISR_2.DLL", ..... ); KernelLibIOControl( ..., &GIISR_INFO_2, ....); I mean the installed ISR are different but the IRQ is the same. Tag: Windows CE - Audio not working Tag: 86163
  - 21
    - .net CE vs WM determination Perhaps this is a question for another group, but I'll start here. I have a CE 5.0 based unit which I was trying out the sample .net cf v2.0 solution, sliderpuzzle, which MS has out on the .NET CF site. When I compiled and deployed, I selected PocketPC 2003 as my system to deploy to and it used the activesync connection to put down the project files (the .exe and .jpeg needed for the project) and then put down system_SR_enu_wm.cab into \windows and tried to install the .cab file. Problem is the _wm .cab file is evidently for windows mobile. There was a non-_wm version which I manually copied to the unit and installed fine. Once the file was installed, VS2005 didn't try to reinstall it, and therefore the deployment worked with zero errors. What I'd like to know is how to get VS2005 to choose the correct file in the first place. Its not a windows mobile device and I didn't choose a windows mobile device to deploy to (at least it wasn't labeled that). I didn't see any options in VS2005, but I also didn't have a specific SDK for this device loaded. Tag: Windows CE - Audio not working Tag: 86158
  - 22
    - Trouble in Multi-Master I2C on PXA27X Dear Sir, I use PXA27X and WINCE 5.0 to develop my project. In my HW design, system have 2 I2C-Master device and 3 I2C-Slave device. I2C-Master : PXA27X , Charger IC I2C-Slave : Microprocessor x 2 , Battery IC In Bootloader , I enable I2C and let bootloader go into a loop. In the loop , I send I2C command to Microprocessor forever. After a long test , the I2C will hang up and SCL pull High , SDA pull Low. I try to re-init the PXA27X I2C Mudule , but SCL still pull High , SDA still pull Low. I guess the I2C collision between PXA27X and Charger IC. How should I do ? ~~>_<~~ The following is my I2C code. Should I notice any thing? Do anyone have idea about this issue ? BR, dirwdirw.tw Tag: Windows CE - Audio not working Tag: 86154
  - 23
    - USB Host Controller Documentation Hi, I am testing USB drivers, but the documentation of USB is missing in CETK tests list in WinCE 5.0 documentation. Can any one provide me with USB docs for CETK testing. Rgds Murali Tag: Windows CE - Audio not working Tag: 86150
  - 24
    - Bug in physmem.c? Hello experts This is not an easy one... My system crashes and I found that this is due to an error in physmem.c. Maybe someone can confirm this to be a bug or someone can tell me what am I doing wrong. My system has RAM from 0x30000000 to 0x31000000 and from 0x40000000 to 0x41000000. GetContiguousPages gets called with parameters (1,0,0) and as a result in pfi it gets the following values: pfi->paStart = 0x31000000 pfi->paEnd = 0x31000000 pfi->paRealEnd = 0x31000000 pfi->pUseMap = 0x81000000 This leads to ixTotal = 0. There is no memory at 0x31000000, so this may be correct, but the following loop for (ixStart = 0; ixStart <= (ixTotal - dwPages); ) { is now an endless loop (with dwPages=1), because all variables are declared as uint!!! The next thing I see is that when ixStart=0x7ff, the loop calls Phys2Virt with an address of 0x317ff000, which gives NULL, because this is not a valid address. Anyway GetContiguousPages doesn't test the result for NULL and calls KCall with this invalid address. The system halts and KCall doesn't come back! Maybe I did something wrong, so here is my OEMAddressTable: OEMAddressTable ;;;------------------------------------------------------------- ;;; Virt Addr Phys Addr MB ;;;------------------------------------------------------------- DCD 0x80000000, 0x30000000, 16 DCD 0x81000000, 0x40000000, 16 DCD 0x88000000, 0x10000000, 16 DCD 0x8c000000, 0x20000000, 16 DCD 0x8d000000, 0x70000000, 4 DCD 0x91000000, 0x00200000, 1 DCD 0x92000000, 0x00300000, 1 DCD 0x9ff00000, 0xfff00000, 1 My device is a PB5.0 custom device on ARM9. TIA -- Michael Reim reim AT helmut-fischer DOT de Tag: Windows CE - Audio not working Tag: 86149
  - 25
    - PDFViewer open a specific page Hello, I would like to open a specific page of an existing PDF file. At the moment I can only open the first page of the PDF file using this command line: pdfviewer <filename> Is there another command line option available? Regards Peter Tag: Windows CE - Audio not working Tag: 86144

Hi

WinCE is running on AU1200 MIPS Processor.

Downloaded BSPs that are already available for AU1200 from bSquare.

After downloading the run time image on the target machine, there is no
audio/sound detected.

While building the image, PSC_12S and PSC_SMBus drivers for audio (PDD)
have been used.

If software mixer registry settings are used then the image can't be
visible on target even though it is loaded successfully, so software
mixer settings in PSC_12S.reg is commented (and the image is appearing
properly but with no sound).

The following is some portion of the log

Windows CE Kernel for MIPS Built on Jun 24 2004 at 18:24:50
+OEMInit
AMD Alchemy Au1200/Db1200
Cold Boot
Using RTCTICK tick source
BootArgs are at A00FFC00, SIG = 544f4f42
Eshell Flags = 0x0, KitlTransport = 0x1
Au1200 AC (PRId 04030201) @ 396MHZ
-OEMInit
OIC() irq=0000002C
*** PlatCardSetSocket : 0
Initializing PSC0 for SMBUS operation
SMB: SMB_Init finished hardware initialization.
PDD_AudioInitialize
+PSC_I2S InitializePlatform
Initializing PSC1 for I2S operation
+PSC_I2S InitializeCodec
WaitForMasterDone: Read Registry:0x110,TimeOut:0x1576b
WaitForMasterDone: Read Registry:0x110,TimeOut:0x13e70
WaitForMasterDone: Read Registry:0x110,TimeOut:0x13e7d
WaitForMasterDone: Read Registry:0x110,TimeOut:0x13e70
WaitForMasterDone: Read Registry:0x110,TimeOut:0x13e81
WaitForMasterDone: Read Registry:0x110,TimeOut:0x13e70
WaitForMasterDone: Read Registry:0x110,TimeOut:0x13e80
+PSC_I2S Codec Initialized
+Initialize Registers
+Registers Initialized
-Platform Initialized
+PSC_I2S InitializeDMA
HalInitDmaChannel: Channel 0 initialized for I2S TX
Using DMA channel for I2S input
HalInitDmaChannel: Channel 1 initialized for I2S RX
-InitializeDMA End
OIC() irq=00006160
PDD_Audio Initialized
PDD_AudioMessage: IOCTL_POWER_CAPABILITIES
au1uart::HWInit - UnitIndex 3 is invalid

Can anyone please tell me what might be the cause/reason for audio to
not work properly.

Thanks in advance
With Regards
Sudheer

Top

Re: Windows CE - Audio not working by Tom

Tom
Tue Jun 20 15:56:13 CDT 2006

updated here:
http://groups.google.com/group/microsoft.public.windowsce.platbuilder/browse_thread/thread/e7662302202f1da7/#

Top