WinCE Support BDA?

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - ANN: March Windows CE Live Chat Tomorrow! Just a note that we'll be hosting an online chat tomorrow concerning Windows Mobile and Windows Embedded CE! Members of the development team will be on hand ready to answer your questions, so bring 'em on! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Title: Windows CE Live Chat! Tuesday, March 25, 2008 9:00 - 10:00 A.M. Pacific time Additional Time Zones: http://www.timeanddate.com/worldclock/fixedtime.html?month=3&day=25&year=2008&hour=9&min=0&sec=0&p1=234 Description: Do you have tough technical questions regarding Windows CE or Windows Mobile for which you're seeking answers? Do you want to tap into the deep knowledge of the talented Microsoft Embedded Devices Group members? If so, please join us for a live Windows CE chat and bring on the questions! Windows CE is the operating system that is powering the next generation of 32-bit, small-footprint and mobile devices. This chat will cover the tools and technologies used to develop devices using the Windows CE operating system. To join this chat, please log on via the main MSDN chat page at: http://msdn.microsoft.com/chats/ Chat Transcripts: Missed a recent chat? We welcome you to visit the Transcript Archive. Transcripts are usually posted within two weeks of the live event. http://msdn.microsoft.com/chats/transcripts/mobileembedded/default.aspx ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Sue sloh@microsoft.com (remove "online" from reply-to address) http://blogs.msdn.com/ce_base/ _____________________________________________________________ This posting is provided "AS IS" with no warranties, and confers no rights. _____________________________________________________________ Tag: WinCE Support BDA? Tag: 111039
  - 2
    - Start Menu Icons Hello All: I am using WinCE 5.00 platform, and I like to eliminate "Favorites", "Documents", "Settings" and "Help" from start menu, Any help? Thanks Tag: WinCE Support BDA? Tag: 111038
  - 3
    - GDI CETK failures and cursor I am receiving several GDI CETK test failures. I am debugging these failures, and I am observing "screen halves mistmatch" failures. When I view my LCD, the cursor is active and appears to be causing the discrepancies between the two screen halves. Is it known that having the cursor active during GDI CETK test runs can cause test failures? Thanks, Danny Tag: WinCE Support BDA? Tag: 111036
  - 4
    - WinCE 4.20 not supporting all hard drives? Hello. We have been using a stable WinCE 4.20 platform for about 4 years in our product, and we're seeing a problem which we can only attribute to using a new line of hard drives. In the past, we have used our Image on a wide collection of hard disks: various pen drives, CompactFlash drives, rotary drives - of all brands. Last week, we attempted to use this same image on a Transcend 256 MB Solid State disk ( http://ec.transcendusa.com/product/ItemDetail.asp?ItemID=TS256MDOM44H ) It doesn't work! After the Image loader has finished its progress, the screen goes black - and we receive no debug messages from WinCE, and nothing else happens. We have used the aforementioned image on the 32 and 64 MB versions of the Transcend disks with absolutely no problems. We tried rebuilding a smaller image for testing purposes, and it works "a little" better, this image boots to the desktop, and after a short while "hangs" - no adverse debug messages are seen. We are currently investigating further, but we're wondering if anyone has seen anything like this with the particular drive, or any other drive. Grateful for any ideas -P Tag: WinCE Support BDA? Tag: 111030
  - 5
    - How to handle with IDirectDrawSurface::UpdateOverlayZOrder in display Dear all, I'm developing WinMobile 6.0 display driver with ddraw multiple overlay surfaces support. Now my display driver can overlay multiple surfaces on the primary surface. But I don't know how to determine their z order when they are overlapped with each other. According to MSDN, IDirectDrawSurface::UpdateOverlayZOrder is defined in DDraw API layer, but it doesn't explain clearly about which DDHAL callback function will be called in display driver? It confused me for a long time, and any comment or suggestion will be very appreciated. Thanks. Tag: WinCE Support BDA? Tag: 111029
  - 6
    - How to communicate with a driver from OAL to replace calls to Hi, I have been asked to device a way to replace a few calls to SC_CreateEvent from several modules within the OAL that we are using because these calls are not supported in WM7 (they never were as I found out). What is the recommended way to do this? I read that in WM7 since you can have kernel mode drivers, one can write such a driver to emulate that capability. I imagine that the driver would have to send a customed IOCTL to AOL and register some callback function that OAL can call to let the driver know that data is available? Thanks Pedro Tag: WinCE Support BDA? Tag: 111027
  - 7
    - SD controler of s3c2440 can support SDHC card? SD controler of s3c2440 can support SDHC card? If yes, how to modify SD card driver? Tag: WinCE Support BDA? Tag: 111016
  - 8
    - SD Card Detection in WINCE 5.0 Hi, I have some questions related to the SD and MMC card drivers under Windows CE 5.0. Let me first explain the behaviour that I am observing :- The MMC card works fine without any modifications to the existing driver for MMC which is under :- C:\WINCE500\PUBLIC\COMMON\OAK\DRIVERS\SDCARD\SDCLIENTDRIVERS\SDMEMORY. Now, when I try to plug in an SD card then the card does not show up in explorer. But it appears in Storage manager. When I formatted the SD Card and after that mounting it, it shows in Explorer. I have done the detection of SD Card in manually (i.e. Formatting and mounting ) and by changing the reg. enteries as: [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles] "PartitionDriverName"="mspart.dll" "DefaultFileSystem"="FATFS" "AutoPart"=dword:00000001 "MountFlags"=dword:00000000 "AutoMount"=dword:00000001 "AutoFormat"=dword:00000001 "Folder"="Mounted Volume" "ActivityEvent"="PowerManager/ActivityTimer/SystemActivity" It directly appear in Storage manager and in Explorer but in formatted format. Can any budy help me to solve these problem I want to use same SD Card in both WIN XP and WIN CE without formatting it. When Card is formatted in WINCE I can't use it in XP it requires Formatting of Card and viceversa. Thanks in advance Best Regards Swapnil Tag: WinCE Support BDA? Tag: 111015
  - 9
    - Does Windows Embedded CE 6.0 support IMGFS? Hello! I have experienced IMGFS(Image File System) at Windows Mobile 5.0 based platform. Does Windows Embedded CE 6.0 support IMGFS??? MSDN doesn't almost mention IMGFS... thanks Tag: WinCE Support BDA? Tag: 111013
  - 10
    - A question about freespinlock in E100bex code. Hi , I'm reading the e100bex source code in WinCE 5.0 platform builder and I've found that the sendlock / recvlock has been just allocated ,used but never freed. It's here got to be something necessary to hold it forever? -- Thanks Yu Hao Tag: WinCE Support BDA? Tag: 111010
  - 11
    - Deploy app to root folder Hi group, I am working with a Windows CE 6.0 device and I want to download my custom application from VS2005 IDE. After build my app I go to "Tools", "options", click on "Device Tools", "Devices", click on Properties of my device and in default location in my device I configure "Root Folder" ot "My Documents Folder" but when I deploy my project, app is not placed in root or my Documents, the application is always placed in "Program Files" folder is this a VS2005 bug? or is a problem with my device? Best Regards, Tag: WinCE Support BDA? Tag: 111006
  - 12
    - How to protect HKEY_LOCAL_MACHINE keys from user mode access under Hello, I work with CE6 and would like to protect all HKEY_LOCAL_MACHINE registry keys so that (malicious) applications running in the user mode cannot modify them (for example device driver registry keys!). CE6 distinguishes between user and kernel mode, so it must be possible to do that, doesn't it? Thank you, Peter Tag: WinCE Support BDA? Tag: 111003
  - 13
    - ce6.0 NKwvsprintfW hard locks system Hello, On a CE6.0 ARM platform the following issue has come up: If calling NKwvsprintfW() during OEMInit() the system hard locks. Once OEMInit() returns, it is possible to subsequently call NKwvsprintfW() without problems. Any insights to why this is occurring, or reference to documentation specifying that this is not legal would be appreciated. chris Tag: WinCE Support BDA? Tag: 110996
  - 14
    - SD Card Experts Hi, I am building wince 5.0 on new hardware, and I am trying to get the my SDmemory card to come up. There are many layers to this driver and I am trying to peel my way through it, but sure could use some help. Device actually supports SDIO , so I have included SDMemory and SDIO Standard Host controller, in the SD card drivers directory there is SD Bus, SD Bus Driver, SdCardLib,SDClientDriver,SDHCDriver,and SDHClib (quite confusing). I have been looking/reading but its pretty daunting at first... anyway, I have enabled as much debug as I could find and I have pasted it below in multiple sections separated by ========= first section is power up/driver load/init with no card inserted, second section is debug when I plug card in, third is card removal,there is an awful lot of debug, and when i first sent the message was too big so I removed PIDs and TIDS and then I removed tsome countdown code that repeated (from 40 down to 1) so I removed a bunch of those counts so I could email. so I'm hoping someone familiar with this driver might be able to help shorten this task... Thanks, Joe W. Power up no card inserted ================== Loaded symbols for 'C:\WINCE500\PBWORKSPACES\AMDLXZ\RELDIR\GEODELX_X86_RELEASE\SDBUS.DLL' SDBusDriver: PROCESS_ATTACH SDCard: +SDInitializeCardLib SDCard: -SDInitializeCardLib SDBusDriver: +SDC_Init SDBusDriver: Initialize: Using request list depth of 48 entries SDCard: +SDCreateMemoryList SDCard: -SDCreateMemoryList SDCard: +SDCreateMemoryList SDCard: -SDCreateMemoryList SDBusDriver: BusRequestCompleteDispatch Work Item Starting Up SDBusDriver: Bus Driver instance created : 0x00042DE0 ! -SDC_Ini Loaded symbols for 'C:\WINCE500\PBWORKSPACES\AMDLXZ\RELDIR\GEODELX_X86_RELEASE\SDHC.DLL' 5739 SDCard: +SDInitializeCardLib 5739 SDCard: -SDInitializeCardLib 5739 SDHCDGetHCFunctions: +Init 5741 SDHCDGetHCFunctions: -Init 5744 SDHC +Init 5744 SDHC Active RegPath: Drivers\Active\30 5747 CSDHCBase::InitializeHardware: IRQ 0xA mapped to SYS_INTR 0x16 5747 CSDHCBase::InitializeHardware: Base address -> 0xff900000; length -> 0x100 5807 SDHC: Using timeout control value of 0xd for 2.0 seconds 5807 +DumpStdHCRegs - Slot 0 ------------------------- 5807 SystemAddressLo: 0x0000 5809 SystemAddressHi: 0x0000 5811 BlockSize: 0x0000 5813 BlockCount: 0x0000 5813 Argument0: 0x0000 5815 Argument1: 0x0000 5815 TransferMode: 0x0000 5925 Command: 0x0000 5925 R0: 0x0000 5925 R1: 0x0000 5925 R2: 0x0000 5925 R3: 0x0000 5927 R4: 0x0000 5927 R5: 0x0000 6096 R6: 0x0000 6096 R7: 0x0000 6096 BufferDataPort0: 0x1404 6096 BufferDataPort1: 0x6000 6098 PresentState: 0x1F20000 6098 HostControl: 0x0000 6098 PowerControl: 0x0000 6100 BlockGapControl: 0x0000 6102 WakeUpControl: 0x0000 6104 ClockControl: 0x0000 6106 TimeOutControl: 0x0000 6106 SoftReset: 0x0000 6106 NormalIntStatus: 0x0000 6106 ErrorIntStatus: 0x0000 6106 NormalIntStatusEnable: 0x0000 6106 ErrorIntStatusEnable: 0x0000 6106 NormalIntSignalEnable: 0x0000 6107 ErrorIntSignalEnable: 0x0000 6107 AutoCMD12ErrorStatus: 0x0000 6109 Capabilities: 0x18021A1 6109 MaxCurrentCapabilites: 0x0040 6109 SlotInterruptStatus: 0x0000 6109 HostControllerVersion: 0x0400 6109 -DumpStdHCRegs------------------------- 6109 SDBusDriver: Host Controller "SD Std Host" assigned number 0 6109 CSDHCBase::SlotOptionHandler(0, SDHCDGetSlotInfo) 6110 SDHCSetRate - Clock Control Reg = 101 6110 SDHCSetRate - Actual clock rate = 16500000 6110 SDCard: +SDCreateMemoryList 6112 SDCard: -SDCreateMemoryList 6112 SDBusDriver: SlotStatusChange Work Item Starting Up 6112 SDBusDriver: SlotStatusChange getting message 6112 SDHCInitialize++ 6112 SDHCInitialize-- 6113 SDHC -Init 6122 CSDHCBase::IST: Thread Starting 6122 CSDHCBase::HandleInterrupt: Slot Interrupt_Status=0x0 6122 SDHCControllerIst - Card is Removed Insert Card ==================== 619655 CSDHCBase::HandleInterrupt: Slot Interrupt_Status=0x1 619655 HandleInterrupt (0) - Normal Interrupt_Status=0x40 619655 SDHCControllerIst - Card is Inserted! 619656 CSDHCSlotBase::SetVoltage: Set SDHC_POWER_CONTROL reg = 0x0f 619907 SDHCSetRate - Clock Control Reg = 8001 619907 SDHCSetRate - Actual clock rate = 128906 619910 SDCard: +SDAllocateFromMemList 619910 SDCard: -SDAllocateFromMemList 619910 SDBusDriver: SlotStatusChange Dispatching message event: 2 619910 SDBusDriver: HandleAddDevice+ 619910 SDCard: +AllocateMemoryWithTag 619910 SDCard: -AllocateMemoryWithTag 619910 SDGetClientFunctions: +Init 619912 SDGetClientFunctions: -Init 619912 SDBusDriver: HandleAddDevice - Delaying init: 1 MS 619914 CSDHCBase::SlotOptionHandler(0, SDHCDSetSlotInterface) 619914 CSDHCSlotBase::SlotOptionHandler: Clock Setting: 100000 619914 SHCSDSlotOptionHandler - Setting Host Control Register 0 619914 SDHCSetRate - Clock Control Reg = 8001 619914 SDHCSetRate - Actual clock rate = 128906 619914 SDSetCardInterfaceForSlot - HC ClockRate differs desired setting: desired: 100000 Hz, Actual : 128906 Hz 619914 SDBusDriver: Checking for SDIO card in slot 0 .... 619914 SDCard: SendSynchCommandRequest+ 619915 SDCard: SDBusRequest+ 619916 SDCard: +SDAllocateFromMemList 619918 SDCard: -SDAllocateFromMemList 619918 SDBus: Allocated request 0x00043588 619918 SDBusDriver: Submitting bus request:0x00043588 to device TempInitDevice0 619918 +++ SDCard: CMD5 CMDArg: 0x00000000 TransferClass:2 ResponseType: R4 619918 +++ SDCard: Calling Send Handler for HC:SD Std Host. Slot:0, Request:0x00043588 619918 CSDHCSlotBase::BusRequestHandler: CMD:5 619919 CSDHCSlotBase::SubmitBusRequestHandler: CMD:5 619919 Sending command register 0x0502 619919 Sending command Argument 0x00000000 619920 HandleInterrupt (0) - Normal Interrupt_Status=0x8000 619920 CSDHCBase::HandleInterrupt: Slot Interrupt_Status=0x0 619920 SDCard: +SDFreeToMemList 619920 SDCard: -SDFreeToMemList 619921 SDBus: Freed request 0x00043588 619921 SDCard: SDBusRequest- 619921 SDCard: SendSynchCommandRequest- 619921 SDBusDriver: SDIO Card check timeout, moving on 619921 SDBusDriver: Instructing new card in slot 0 to go IDLE 619921 SDCard: SendSynchCommandRequest+ 619921 SDCard: SDBusRequest+ 619922 SDCard: +SDAllocateFromMemList 619922 SDCard: -SDAllocateFromMemList 619922 SDBus: Allocated request 0x00043588 619922 SDBusDriver: Submitting bus request:0x00043588 to device TempInitDevice0 619922 +++ SDCard: CMD0 CMDArg: 0x00000000 TransferClass:2 ResponseType: NoResponse 619922 +++ SDCard: Calling Send Handler for HC:SD Std Host. Slot:0, Request:0x00043588 619922 CSDHCSlotBase::BusRequestHandler: CMD:0 619923 CSDHCSlotBase::SubmitBusRequestHandler: CMD:0 619923 Sending command register 0x0000 619923 Sending command Argument 0x00000000 619923 HandleInterrupt (0) - Normal Interrupt_Status=0x01 619924 SDCard: SDBusRequest- 619924 SDCard: +SDFreeToMemList 619924 SDCard: -SDFreeToMemList 619924 SDBus: Freed request 0x00043588 619924 SDCard: SendSynchCommandRequest- 619924 SDBusDriver: Checking for MMC Card in slot 0 619924 SDCard: SendSynchCommandRequest+ 619925 SDCard: SDBusRequest+ 619925 SDCard: +SDAllocateFromMemList 619926 SDCard: -SDAllocateFromMemList 619927 SDBus: Allocated request 0x00043588 619927 SDBusDriver: Submitting bus request:0x00043588 to device TempInitDevice0 619927 +++ SDCard: CMD1 CMDArg: 0x00300000 TransferClass:2 ResponseType: R3 619927 +++ SDCard: Calling Send Handler for HC:SD Std Host. Slot:0, Request:0x00043588 619927 CSDHCSlotBase::BusRequestHandler: CMD:1 619927 CSDHCSlotBase::SubmitBusRequestHandler: CMD:1 619928 Sending command register 0x0102 619928 Sending command Argument 0x00300000 619929 HandleInterrupt (0) - Normal Interrupt_Status=0x8000 619929 CSDHCBase::HandleInterrupt: Slot Interrupt_Status=0x0 619929 SDCard: +SDFreeToMemList 619929 SDCard: -SDFreeToMemList 619929 SDBus: Freed request 0x00043588 619930 SDCard: SDBusRequest- 619930 SDCard: SendSynchCommandRequest- 619930 SDCard: SendSynchCommandRequest+ 619930 SDCard: SDBusRequest+ 619930 SDCard: +SDAllocateFromMemList 619930 SDCard: -SDAllocateFromMemList 619930 SDBus: Allocated request 0x00043588 619931 SDBusDriver: Submitting bus request:0x00043588 to device TempInitDevice0 619931 +++ SDCard: CMD55 CMDArg: 0x00000000 TransferClass:2 ResponseType: R1 619931 +++ SDCard: Calling Send Handler for HC:SD Std Host. Slot:0, Request:0x00043588 619931 CSDHCSlotBase::BusRequestHandler: CMD:55 619931 CSDHCSlotBase::SubmitBusRequestHandler: CMD:55 619931 Sending command register 0x371A 619931 Sending command Argument 0x00000000 619933 HandleInterrupt (0) - Normal Interrupt_Status=0x01 619933 SDCard: SDBusRequest- 619933 SDCard: +SDFreeToMemList 619933 SDCard: -SDFreeToMemList 619933 SDBus: Freed request 0x00043588 619933 SDCard: SendSynchCommandRequest- 619933 SDCard: SendSynchCommandRequest+ 619934 SDCard: SDBusRequest+ 619935 SDCard: +SDAllocateFromMemList 619935 SDCard: -SDAllocateFromMemList 619936 SDBus: Allocated request 0x00043588 619936 SDBusDriver: Submitting bus request:0x00043588 to device TempInitDevice0 619936 +++ SDCard: CMD41 CMDArg: 0x00000000 TransferClass:2 ResponseType: R3 619936 +++ SDCard: Calling Send Handler for HC:SD Std Host. Slot:0, Request:0x00043588 619936 CSDHCSlotBase::BusRequestHandler: CMD:41 619936 CSDHCSlotBase::SubmitBusRequestHandler: CMD:41 619936 Sending command register 0x2902 619937 Sending command Argument 0x00000000 619938 HandleInterrupt (0) - Normal Interrupt_Status=0x01 619938 SDCard: SDBusRequest- 619938 SDCard: +SDFreeToMemList 619938 SDCard: -SDFreeToMemList 619938 SDBus: Freed request 0x00043588 619938 SDCard: SendSynchCommandRequest- 619938 SDBusDriver: SDMemory Card detected in slot 0 619939 SDBusDriver: Device Power Range:0x00FF8000 matches HC desired power: 0x00100000 619939 SDBusDriver: Setting slot 0 power to 0x00100000 619939 CSDHCBase::SlotOptionHandler(0, SDHCDSetSlotPower) 619941 SDCard: SendSynchCommandRequest+ 619941 SDCard: SDBusRequest+ 619941 SDCard: +SDAllocateFromMemList 619941 SDCard: -SDAllocateFromMemList 619941 SDBus: Allocated request 0x00043588 619941 SDBusDriver: Submitting bus request:0x00043588 to device TempInitDevice0 619941 +++ SDCard: CMD0 CMDArg: 0x00000000 TransferClass:2 ResponseType: NoResponse 619942 +++ SDCard: Calling Send Handler for HC:SD Std Host. Slot:0, Request:0x00043588 619942 CSDHCSlotBase::BusRequestHandler: CMD:0 619942 CSDHCSlotBase::SubmitBusRequestHandler: CMD:0 619942 Sending command register 0x0000 619942 Sending command Argument 0x00000000 619943 HandleInterrupt (0) - Normal Interrupt_Status=0x01 619943 SDCard: SDBusRequest- 619943 SDCard: +SDFreeToMemList 619943 SDCard: -SDFreeToMemList 619943 SDBus: Freed request 0x00043588 619943 SDCard: SendSynchCommandRequest- 619944 SDBusDriver: Power Set, checking card in slot 0, MaxRetries: 40, Time: 2000 MS, Interval: 50 MS 619944 SDCard: SendSynchCommandRequest+ 619944 SDCard: SDBusRequest+ 619944 SDCard: +SDAllocateFromMemList 619944 SDCard: -SDAllocateFromMemList 619944 SDBus: Allocated request 0x00043588 619944 SDBusDriver: Submitting bus request:0x00043588 to device TempInitDevice0 619945 +++ SDCard: CMD55 CMDArg: 0x00000000 TransferClass:2 ResponseType: R1 619945 +++ SDCard: Calling Send Handler for HC:SD Std Host. Slot:0, Request:0x00043588 619945 CSDHCSlotBase::BusRequestHandler: CMD:55 619945 CSDHCSlotBase::SubmitBusRequestHandler: CMD:55 619945 Sending command register 0x371A 619945 Sending command Argument 0x00000000 619947 HandleInterrupt (0) - Normal Interrupt_Status=0x01 619947 SDCard: SDBusRequest- 619947 SDCard: +SDFreeToMemList 619947 SDCard: -SDFreeToMemList 619948 SDBus: Freed request 0x00043588 619948 SDCard: SendSynchCommandRequest- 619948 SDCard: SendSynchCommandRequest+ 619948 SDCard: SDBusRequest+ 619950 SDCard: +SDAllocateFromMemList 619950 SDCard: -SDAllocateFromMemList 619950 SDBus: Allocated request 0x00043588 619950 SDBusDriver: Submitting bus request:0x00043588 to device TempInitDevice0 619951 +++ SDCard: CMD41 CMDArg: 0x00100000 TransferClass:2 ResponseType: R3 619951 +++ SDCard: Calling Send Handler for HC:SD Std Host. Slot:0, Request:0x00043588 619951 CSDHCSlotBase::BusRequestHandler: CMD:41 619951 CSDHCSlotBase::SubmitBusRequestHandler: CMD:41 619951 Sending command register 0x2902 619951 Sending command Argument 0x00100000 619952 HandleInterrupt (0) - Normal Interrupt_Status=0x01 619952 SDCard: SDBusRequest- 619953 SDCard: +SDFreeToMemList 619953 SDCard: -SDFreeToMemList 619953 SDBus: Freed request 0x00043588 619953 SDCard: SendSynchCommandRequest- 619953 SDBusDriver: Card in slot 0 not ready, countdown: 40 620004 SDCard: SendSynchCommandRequest+ 620004 SDCard: SDBusRequest+ 620004 SDCard: +SDAllocateFromMemList 620004 SDCard: -SDAllocateFromMemList 620004 SDBus: Allocated request 0x00043588 620004 SDBusDriver: Submitting bus request:0x00043588 to device TempInitDevice0 620004 +++ SDCard: CMD55 CMDArg: 0x00000000 TransferClass:2 ResponseType: R1 620005 +++ SDCard: Calling Send Handler for HC:SD Std Host. Slot:0, Request:0x00043588 620005 CSDHCSlotBase::BusRequestHandler: CMD:55 620005 CSDHCSlotBase::SubmitBusRequestHandler: CMD:55 620005 Sending command register 0x371A 620005 Sending command Argument 0x00000000 620006 HandleInterrupt (0) - Normal Interrupt_Status=0x01 620006 SDCard: SDBusRequest- 620007 SDCard: +SDFreeToMemList 620007 SDCard: -SDFreeToMemList 620007 SDBus: Freed request 0x00043588 620007 SDCard: SendSynchCommandRequest- 620007 SDCard: SendSynchCommandRequest+ 620007 SDCard: SDBusRequest+ 620007 SDCard: +SDAllocateFromMemList 620008 SDCard: -SDAllocateFromMemList 620008 SDBus: Allocated request 0x00043588 620008 SDBusDriver: Submitting bus request:0x00043588 to device TempInitDevice0 620008 +++ SDCard: CMD41 CMDArg: 0x00100000 TransferClass:2 ResponseType: R3 620008 +++ SDCard: Calling Send Handler for HC:SD Std Host. Slot:0, Request:0x00043588 620008 CSDHCSlotBase::BusRequestHandler: CMD:41 620008 CSDHCSlotBase::SubmitBusRequestHandler: CMD:41 620009 Sending command register 0x2902 620009 Sending command Argument 0x00100000 620010 HandleInterrupt (0) - Normal Interrupt_Status=0x01 620010 SDCard: SDBusRequest- 620011 SDCard: +SDFreeToMemList 620011 SDCard: -SDFreeToMemList 620011 SDBus: Freed request 0x00043588 620011 SDCard: SendSynchCommandRequest- 620011 SDBusDriver: Card in slot 0 not ready, countdown: 39 620062 SDCard: SendSynchCommandRequest+ 620066 SDCard: SDBusRequest+ 620066 SDCard: +SDAllocateFromMemList 620066 SDCard: -SDAllocateFromMemList 620066 SDBus: Allocated request 0x00043588 620067 SDBusDriver: Submitting bus request:0x00043588 to device TempInitDevice0 620068 +++ SDCard: CMD55 CMDArg: 0x00000000 TransferClass:2 ResponseType: R1 620068 +++ SDCard: Calling Send Handler for HC:SD Std Host. Slot:0, Request:0x00043588 620068 CSDHCSlotBase::BusRequestHandler: CMD:55 620069 CSDHCSlotBase::SubmitBusRequestHandler: CMD:55 620069 Sending command register 0x371A 620069 Sending command Argument 0x00000000 620070 HandleInterrupt (0) - Normal Interrupt_Status=0x01 620070 SDCard: SDBusRequest- 620070 SDCard: +SDFreeToMemList 620070 SDCard: -SDFreeToMemList 620071 SDBus: Freed request 0x00043588 620071 SDCard: SendSynchCommandRequest- 620071 SDCard: SendSynchCommandRequest+ 620071 SDCard: SDBusRequest+ 620071 SDCard: +SDAllocateFromMemList 620073 SDCard: -SDAllocateFromMemList 620073 SDBus: Allocated request 0x00043588 620073 SDBusDriver: Submitting bus request:0x00043588 to device TempInitDevice0 620073 +++ SDCard: CMD41 CMDArg: 0x00100000 TransferClass:2 ResponseType: R3 620074 +++ SDCard: Calling Send Handler for HC:SD Std Host. Slot:0, Request:0x00043588 620074 CSDHCSlotBase::BusRequestHandler: CMD:41 620074 CSDHCSlotBase::SubmitBusRequestHandler: CMD:41 620074 Sending command register 0x2902 620074 Sending command Argument 0x00100000 620075 HandleInterrupt (0) - Normal Interrupt_Status=0x01 620075 SDCard: SDBusRequest- 620075 SDCard: +SDFreeToMemList 620076 SDCard: -SDFreeToMemList 620076 SDBus: Freed request 0x00043588 ======== Removed repeated countdowns === 38 thru 5 ============ 620076 SDCard: SendSynchCommandRequest-countdown: 4 622159 SDCard: SendSynchCommandRequest+ 622159 SDCard: SDBusRequest+ 622160 SDCard: +SDAllocateFromMemList 622160 SDCard: -SDAllocateFromMemList 622160 SDBus: Allocated request 0x00043588 622160 SDBusDriver: Submitting bus request:0x00043588 to device TempInitDevice0 622160 +++ SDCard: CMD55 CMDArg: 0x00000000 TransferClass:2 ResponseType: R1 622161 +++ SDCard: Calling Send Handler for HC:SD Std Host. Slot:0, Request:0x00043588 622161 CSDHCSlotBase::BusRequestHandler: CMD:55 622161 CSDHCSlotBase::SubmitBusRequestHandler: CMD:55 622161 Sending command register 0x371A 622161 Sending command Argument 0x00000000 622162 HandleInterrupt (0) - Normal Interrupt_Status=0x01 622162 SDCard: SDBusRequest- 622162 SDCard: +SDFreeToMemList 622163 SDCard: -SDFreeToMemList 622163 SDBus: Freed request 0x00043588 622163 SDCard: SendSynchCommandRequest- 622163 SDCard: SendSynchCommandRequest+ 622163 SDCard: SDBusRequest+ 622163 SDCard: +SDAllocateFromMemList 622163 SDCard: -SDAllocateFromMemList 622164 SDBus: Allocated request 0x00043588 622164 SDBusDriver: Submitting bus request:0x00043588 to device TempInitDevice0 622164 +++ SDCard: CMD41 CMDArg: 0x00100000 TransferClass:2 ResponseType: R3 622164 +++ SDCard: Calling Send Handler for HC:SD Std Host. Slot:0, Request:0x00043588 622164 CSDHCSlotBase::BusRequestHandler: CMD:41 622164 CSDHCSlotBase::SubmitBusRequestHandler: CMD:41 622164 Sending command register 0x2902 622165 Sending command Argument 0x00100000 622166 HandleInterrupt (0) - Normal Interrupt_Status=0x01 622166 SDCard: SDBusRequest- 622166 SDCard: +SDFreeToMemList 622167 SDCard: -SDFreeToMemList 622167 SDBus: Freed request 0x00043588 622167 SDCard: SendSynchCommandRequest- 622167 SDBusDriver: Card in slot 0 not ready, countdown: 3 622218 SDCard: SendSynchCommandRequest+ 622218 SDCard: SDBusRequest+ 622218 SDCard: +SDAllocateFromMemList 622218 SDCard: -SDAllocateFromMemList 622218 SDBus: Allocated request 0x00043588 622218 SDBusDriver: Submitting bus request:0x00043588 to device TempInitDevice0 622218 +++ SDCard: CMD55 CMDArg: 0x00000000 TransferClass:2 ResponseType: R1 622219 +++ SDCard: Calling Send Handler for HC:SD Std Host. Slot:0, Request:0x00043588 622219 CSDHCSlotBase::BusRequestHandler: CMD:55 622219 CSDHCSlotBase::SubmitBusRequestHandler: CMD:55 622219 Sending command register 0x371A 622219 Sending command Argument 0x00000000 622220 HandleInterrupt (0) - Normal Interrupt_Status=0x01 622220 SDCard: SDBusRequest- 622220 SDCard: +SDFreeToMemList 622221 SDCard: -SDFreeToMemList 622221 SDBus: Freed request 0x00043588 622221 SDCard: SendSynchCommandRequest- 622221 SDCard: SendSynchCommandRequest+ 622221 SDCard: SDBusRequest+ 622222 SDCard: +SDAllocateFromMemList 622222 SDCard: -SDAllocateFromMemList 622223 SDBus: Allocated request 0x00043588 622223 SDBusDriver: Submitting bus request:0x00043588 to device TempInitDevice0 622223 +++ SDCard: CMD41 CMDArg: 0x00100000 TransferClass:2 ResponseType: R3 622223 +++ SDCard: Calling Send Handler for HC:SD Std Host. Slot:0, Request:0x00043588 622223 CSDHCSlotBase::BusRequestHandler: CMD:41 622223 CSDHCSlotBase::SubmitBusRequestHandler: CMD:41 622223 Sending command register 0x2902 622224 Sending command Argument 0x00100000 622225 HandleInterrupt (0) - Normal Interrupt_Status=0x01 622225 SDCard: SDBusRequest- 622225 SDCard: +SDFreeToMemList 622225 SDCard: -SDFreeToMemList 622225 SDBus: Freed request 0x00043588 622225 SDCard: SendSynchCommandRequest- 622225 SDBusDriver: Card in slot 0 not ready, countdown: 2 622277 SDCard: SendSynchCommandRequest+ 622277 SDCard: SDBusRequest+ 622277 SDCard: +SDAllocateFromMemList 622277 SDCard: -SDAllocateFromMemList 622277 SDBus: Allocated request 0x00043588 622277 SDBusDriver: Submitting bus request:0x00043588 to device TempInitDevice0 622277 +++ SDCard: CMD55 CMDArg: 0x00000000 TransferClass:2 ResponseType: R1 622277 +++ SDCard: Calling Send Handler for HC:SD Std Host. Slot:0, Request:0x00043588 622278 CSDHCSlotBase::BusRequestHandler: CMD:55 622278 CSDHCSlotBase::SubmitBusRequestHandler: CMD:55 622278 Sending command register 0x371A 622278 Sending command Argument 0x00000000 622279 HandleInterrupt (0) - NormalInterrupt_Status=0x01 622279 SDCard: SDBusRequest- 622279 SDCard: +SDFreeToMemList 622280 SDCard: -SDFreeToMemList 622280 SDBus: Freed request 0x00043588 622280 SDCard: SendSynchCommandRequest- 622280 SDCard: SendSynchCommandRequest+ 622280 SDCard: SDBusRequest+ 622282 SDCard: +SDAllocateFromMemList 622282 SDCard: -SDAllocateFromMemList 622282 SDBus: Allocated request 0x00043588 622282 SDBusDriver: Submitting bus request:0x00043588 to device TempInitDevice0 622283 +++ SDCard: CMD41 CMDArg: 0x00100000 TransferClass:2 ResponseType: R3 622284 +++ SDCard: Calling Send Handler for HC:SD Std Host. Slot:0, Request:0x00043588 622284 CSDHCSlotBase::BusRequestHandler: CMD:41 622284 CSDHCSlotBase::SubmitBusRequestHandler: CMD:41 622284 Sending command register 0x2902 622284 Sending command Argument 0x00100000 622285 HandleInterrupt (0) - Normal Interrupt_Status=0x01 622286 SDCard: SDBusRequest- 622286 SDCard: +SDFreeToMemList 622286 SDCard: -SDFreeToMemList 622286 SDBus: Freed request 0x00043588 622286 SDCard: SendSynchCommandRequest- 622286 SDBusDriver: Card in slot 0 not ready, countdown: 1 622337 SDBusDriver: HandleAddDevice- 622337 SDCard: +SDFreeToMemList 622340 SDCard: -SDFreeToMemList 622341 SDBusDriver: SlotStatusChange getting message ================================ Remove Card =============== 838589 CSDHCBase::HandleInterrupt: Slot Interrupt_Status=0x1 838589 HandleInterrupt (0) - Normal Interrupt_Status=0x80 838589 SDHCControllerIst - Card is Removed! 838589 SDCard: +SDAllocateFromMemList 838589 SDCard: -SDAllocateFromMemList 838590 SDBusDriver: SlotStatusChange Dispatching message event: 1 838591 SDBusDriver: HandleRemoveDevice+ 838591 SDCard: +SDFreeMemory 838591 SDCard: -SDFreeMemory 838591 SDUnloadDevice: Client Device deleted 838592 SDBusDriver: HandleRemoveDevice- 838592 SDCard: +SDFreeToMemList 838592 SDCard: -SDFreeToMemList 838592 SDBusDriver: SlotStatusChange getting message Tag: WinCE Support BDA? Tag: 110993
  - 15
    - usbmsfn on wince 5.0 Hi, all I am trying to my device as mass storage to Apple Mac OS. I could not see my device on Mac system. The usb mass storage function is compatible with Mac OS? Please give me some suggestions. Best Regards, Hanko Tag: WinCE Support BDA? Tag: 110984
  - 16
    - Q965/ICH8 BSP for WINCE 5.0 and WINCE 6.0 Dear Sir, Does anyone have Q965/ICH8 BSP for WINCE 5.0 / WINCE 6.0 platform or where can I get the BSP ? BR, dirw Tag: WinCE Support BDA? Tag: 110983
  - 17
    - Getting MSMQ to run on BOOT // Another question from Bobby I found this (http://msdn2.microsoft.com/en-us/library/ms905802.aspx) and was wondering if I could use the "QueueManagerGUID" and still have it run on boot? // Original Answer from John We force people to call the commands the first time because MSMQ needs to create a UUID for the machine on 1st use - msmqadm register. If MSMQ tried to get its UUID the 1st time a device ever booted without user intercaction, there's the chance (very slight) that if the system clock weren't set already then we could get the same random # when we call the random # generator since every clock would be 12:00:05AM, 1/1/08. This way people presumably set the clock 1st and then msmqdam register. Now CE's random # generator is better than only relying on current device time, but the original implementor was paranoid. You can check out the MSMQADm source code at \public\servers\sdk\samples\msmq\msmqadm to get a sense of what it's doing. Basically all this stuff is just registry writes. You could potentially implement equivalent of this stuff in .Net, probably easier is to have a boottime program that just does CreateProcess("msmqadm","register",...) on each command. In theory you could also burn the MSMQ device GUID in at ROM creation time, though since it's important GUID's are unique each device would have to have a slightly different img which I imagine is quite hard in practice to make. Finally, if you have followups let's take the conversation to microsoft.public.windowsce.platbuilder newsgroup, copying+pasting what we have, so the whole community can benefit. John // Original Email from Bobby Cannon I would like any help possible. I have a project that I am working on that requires MSMQ. I have create a new Windows CE 6.0 R2 image that includes everything I need (.NET 3.5 Headless, MSMQ, etc...). The problem is that I have to manually start MSMQ with the following three commands. msmqadm register msmqadm enable binary msmqadm start Then run my apps. How can I start the image and have MSMQ already running. Tag: WinCE Support BDA? Tag: 110981
  - 18
    - kitl debug question Hello, on WINCE 5.0 I have built a debug image, my Device connectivity is set for ethernet, Debugger is KdStub, I can download the image via ethernet but the debugger never switches to Ethernet once the image loads. all my debug messages come out in my serial port console and not via my etehrnet to the debug output window ? what am I missing for the handoff ? Thanks, Joe W. Tag: WinCE Support BDA? Tag: 110976
  - 19
    - Should I do any other settings except the IMGSDBUS2 to let sdbus2 work? I set the IMGSDBUS2=1 in Platformbuild5. But after builing , I even can not see the directory name for the SD card any more. I thought that my SDHC driver should also link to the SDBUS2 interface, but I have not found which file to be modified for that. Can anyone imply me? I use S3C2410_SDHC drive. Thanks! Tag: WinCE Support BDA? Tag: 110975
  - 20
    - Relationship between battdrvr and pm Hi All What is the relation ship between power manager and battery driver? How the power manager accesses battery functions. I use sample battery driver supplied with wince 5.0 and unmodified pm code with smdk2440. I get following prefetch abort exception while booting the system -- Message posted via PocketPCJunkies.com http://www.pocketpcjunkies.com/Uwe/Forums.aspx/wince-pb/200803/1 Tag: WinCE Support BDA? Tag: 110973
  - 21
    - Debug OS CE6 image crash when TAPI is included Hi, I have build a CE6.0 debug image. When using VS2005+PB I can debug my image without problems (LoadCEPC eboot.bin and Target | Attach Device from VS) When I run the image without VS attached (LoadCEPC nk.bin), all output is redirected to COM1 in the bootloader (this is so by default, OK), but when at some point tapi.dll is loaded in memory (see logging), the debug image crashes. If I remove the TAPI dependency from my image, the debug image starts fine. When I run the release version of the image (with TAPI included) it also works fine, but than COM1 is not stolen for debug messages. I guess this problem has to do with a conflict between redirecting debug to COM1 and thus stealing COM1 from the available serial ports in my image. The problem is I can not see what is going on, because the source code of TAPI.DLL is not in the shared source. Does anybody know what might go wrong? This used to work in WinCE5. Werner I want to run the debug image without PB to detect some strange problems I have in a driver (that emits debug logging when something goes wrong with it). Hooking up VS and PB is tooooo slow and I can not deploy this on several devices at the same time. TAPI is included automatically in the image as soon as you include the network UI component which I need for ethernet (ip address,...) Logging of what goes wrong when tapi.dll is loaded... <--- More logging before ---> CardBus.DLL DLL_PROCESS_ATTACH DeviceFolder::LoadDevice(Drivers\BuiltIn\PCCARD) last 109 TicksDEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\Serial\BusPrefix) returned 2 OSAXST1: >>> Loading Module 'coredll.dll' (0x8F5F9630) at address 0x40010000-0x400E4000 in Process 'udevice.exe' (0x8F445570) OSAXST1: >>> Loading Module 'udevice.exe' (0x8F445570) at address 0x00010000-0x00016000 in Process 'udevice.exe' (0x8F445570) udevice.exe $udevice_0003 FSDMGR!MountTable_t::RegisterVolumeName: Registered "$udevice_0003" at index 9APISCreateAPIHandle: pvData == NULL FSDMGR!MountTable_t::RegisterVolume: Registered volume at index 9 (Name="$udevice_0003", MountFlags=0x101)OSAXST1: >>> Loading Module 'notify.dll' (0x8F4368AC) at address 0x400F000 0-0x40107000 in Process 'NK.EXE' (0x82A17C80) OSAXST1: >>> Loading Module 'notify.dll' (0x8F4368AC) at address 0x400F0000-0x40107000 in Process 'udevice.exe' (0x8F445570) [NOTIFY] Module loaded [NOTIFY] Initializing. [NOTIFY] Initialization completed successfully OSAXST1: >>> Loading Module 'coredll.dll' (0x8F5F9630) at address 0x40010000-0x400E4000 in Process 'udevice.exe' (0x8F25C000) OSAXST1: >>> Loading Module 'udevice.exe' (0x8F25C000) at address 0x00010000-0x00016000 in Process 'udevice.exe' (0x8F25C000) udevice.exe $udevice_1001 FSDMGR!MountTable_t::RegisterVolumeName: Registered "$udevice_1001" at index 10APISCreateAPIHandle[NOTIFY] ProcessDatabase::started at local time 03/21/2008 15:07:55 : pvData == NULL FSDMGR!MountTable_t::RegisterVolume: Registered volume at index 10 (Name="$udevice_1001", MountFlags=0x101)OSAXST1: >>> Loading Module 'com16550.dll' (0x8F25B648) at address 0x41CF0000-0x41D05000 in Process 'NK.EXE' (0x82A17C80) OSAXST1: >>> Loading Module 'com16550.dll' (0x8F25B648) at address 0x41CF0000-0x41D05000 in Process 'udevice.exe' (0x8F25C000) OSAXST1: >>> Loading Module 'ceddk.dll' (0x8F25B780) at address 0x40270000-0x4027A000 in Process 'NK.EXE' (0x82A17C80) OSAXST1: >>[NOTIFY] HandleSystemEvent 7 /ADD DMA1: [NOTIFY] HandleSystemEvent 7 /ADD NFY0: > Loading Module 'ceddk.dll' (0x8F25B780) at address 0x40270000-0x4027A000 in Process 'udevice.exe' (0x8F25C000) DeviceFolder::LoadDevice(Drivers\BuiltIn\Serial) last 556 TicksDEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\Parallel\BusPrefix) returned 2 OSAXST1: >>> Loading Module 'parallel.dll' (0x8F0B4818) at address 0xC0E00000-0xC0E0C000 in Process 'NK.EXE' (0x82A17C80) parallel port process attach [LPT_Init]: entry Drivers\Active\4294967292. >RegisterLPTName Regis[NOTIFY] HandleSystemEvent 7 /ADD COM1: terLPTName: adding 'LPT1:' as 'Port5' <RegisterLPTName DeviceFolder::LoadDevice(Drivers\BuiltIn\Parallel) last 108 TicksDEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\NLed\BusPrefix) returned 2 OSAXST1: >>> Loading Module 'nleddrvr.dll' (0x8F0B4960) at address 0xC0E10000-0xC0E15000 in Process 'NK.EXE' (0x82A17C80) DeviceFolder::LoadDevice(Drivers\BuiltIn\NLed)[NOTIFY] HandleSystemEvent 7 /ADD LPT1: [NOTIFY] HandleSystemEvent 7 /ADD NLD1: last 56 TicksDEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\TAPI\Prefix) returned 2 DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\TAPI\BusPrefix) returned 2 OSAXST1: >>> Loading Module 'tapi.dll' (0x8F0B4B58) at address 0xC08C0000-0xC0904000 in Process 'NK.EXE' (0x82A17C80) OSAXST1: >>> Loading Module 'unimodem.dll' (0x8F0B4E10) at address 0xC0910000-0xC0934000 in Process 'NK.EXE' (0x82A17C80) DeviceFolder::LoadDevice(Drivers\BuiltIn\TAPI) last 111 TicksDEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\NTLMSSP_SVC\BusPrefix) returned 2 Exception 'Access Violation' (14): Thread-Id=015e0006(pth=8f0bc1a4), Proc-Id=00400002(pprc=82a17c80) 'NK.EXE', VM-active=00400002(pprc=82a17c80) 'NK.EXE' PC=802aec24(kernel.dll+0x0005cc24) RA=802bd400(kernel.dll+0x0006b400) SP=d064fa40, BVA=d004f000 WriteMsgQueue: copy data error Exception 'Access Violation' (14): Thread-Id=015e0006(pth=8f0bc1a4), Proc-Id=00400002(pprc=82a17c8OSAXST1: >>> Loading Module 'coredll.dll' (0x8F5F9630) at address 0x40010000-0x400E4000 in Process 'udevice.exe' (0x8F0BC5A4) OSAXST1: >>> Loading Module 'udevice.exe' (0x8F0BC5A4) at address 0x00010000-0x00016000 in Process 'udevice.exe' (0x8F0BC5A4) udevice.exe $udevice_1002 FSDMGR!MountTable_t::RegisterVolumeName: Registered "$udevice_1002" at index 11APISCreateAPIHandle: p0) 'NK.EXE', VM-active=00400002(pprc=82a17c80) 'NK.EXE' PC=802af08a(kernel.dll+0x0005d08a) RA=802af27e(kernel.dll+0x0005d27e) SP=d064fa20, BVA=cccccce4 vData == NULL FSDMGR!MountTable_t::RegisterVolume: Registered volume at index 11 (Name="$udevice_1002", MountFlags=0x101)OSAXST1: >>> Loading Module 'ntlmssp_svc.dll' (0x8F0BB888) at address 0x41D30000-0x41D57000 in Process 'NK.EXE' (0x82A17C80) OSAXST1: >>> Loading Module 'ntlmssp_svc.dll' (0x8F0BB888) at address 0x41D30000-0x41D57000 in Process 'udevice.exe' (0x8F0BC5A4) OSAXST1: >>> Loading Module 'rsaenh.dll' (0x8F0BB9E4) at address 0x41D60000-0x41D84000 in Process 'NK.EXE' (0x82A17C80) OSAXST1: >>> Loading Module 'rsaenh.dll' (0x8F0BB9E4) at address 0x41D60000-0x41D84000 in Process 'udevice.exe' (0x8F0BC5A4) <--- Logging stops here---> Tag: WinCE Support BDA? Tag: 110971
  - 22
    - Develop/debug driver without creating OS? I have a need to develop a USB device driver for Windows CE 5.0. I do have platform builder for that version. But the units I need to run on already have CE installed on them in ROM. All of the help text I've found on debugging CE drivers assume that you're developing an OS image as well. Is it possible to use this for what I need to do, or can I debug my driver with something else, Visual Studio or Embedded VC++? I hope so, printf debugging will be painful. Thanks in advance for any help. Tag: WinCE Support BDA? Tag: 110963
  - 23
    - Question about AppVerif Hi guys, We develop a x86 device that runs Windows CE 6. A couple weeks ago we started to use AppVerif on many of our applications. We found a lot of handle not closed and some heap leak. Now we suspect that some of our services are causing a memory leak. We would like to use the same application to see where those leaks are. The problem is that we can;t find a way to stop serviced.exe. How can we stop it? Does stopping all services will stop serviced.exe? I would also like to know if someone noticed that all the C Runtime functions are not monitored by AppVerif? A call to fopen without a fclose will not be visible in the appverif log. How can I verify these functions for leaks? Thanks. Tag: WinCE Support BDA? Tag: 110959
  - 24
    - Determining Driver\Active subkey value Hello, I'm fixing a driver for a custom PCMCIA (CF) card so it works with the latest versions of IPAQs. The problem is that when the CF card is inserted, the Device Manager is now incrementing the socket (Sckt) value each time. This was never the case before and the socket value was always 0x0000. So now my driver has to try to determine what this value is so it can open and return a proper handle to the device. What would be the best way to do this? I started writing a 'for' loop that searched through the active subkeys for the "Name" and then the "Sckt" value, but I got hung up on the fact that I don't know how to find out how many active keys there are and therefore how many times to loop. Does anyone know an easy way to find out what socket value was assigned to an active driver? Thanks, Thomas Magma Tag: WinCE Support BDA? Tag: 110958
  - 25
    - CE 5.0 - problems booting i855gme-based board Hi all, I'm trying to boot an i855gme-based board with wince 5.0. I'm using loadcepc. Below there is the log I got from the serial port, while booting the eboot.bin and then downloading via ethernet the nk.bin. The display just show a message "jumping to 0x00225738". Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built Mar 19 2008 12:22:00 Found ICH with DeviceID=0x3580 Microsoft Windows CE Ethernet Bootloader 3.5 for Intel 855GM/855GME board (Mar 17 2008) Boot Args @ 0x1DF66 and ucLoaderFlags is 1 PCI Device Configurations (2 PCI bus(es) present)... ======================================================== Bus, Device, Function = 0, 0, 1 Vendor ID, Device ID = 0x8086, 0x3584 Base Class, Subclass = 8, 128 => BASE_SYSTEM_DEV Interrupt = 0 ======================================================== Bus, Device, Function = 0, 0, 3 Vendor ID, Device ID = 0x8086, 0x3585 Base Class, Subclass = 8, 128 => BASE_SYSTEM_DEV Interrupt = 0 ======================================================== Bus, Device, Function = 0, 2, 0 Vendor ID, Device ID = 0x8086, 0x3582 Base Class, Subclass = 3, 0 => DISPLAY_CTLR Interrupt = 9 BaseAddress[0] = 0xD8000000 (Memory) BaseAddress[1] = 0xEFF00000 (Memory) BaseAddress[2] = 0xECF8 (I/O) ======================================================== Bus, Device, Function = 0, 2, 1 Vendor ID, Device ID = 0x8086, 0x3582 Base Class, Subclass = 3, 128 => DISPLAY_CTLR Interrupt = 0 BaseAddress[0] = 0xE0000000 (Memory) BaseAddress[1] = 0xEFE80000 (Memory) ======================================================== Bus, Device, Function = 0, 29, 0 Vendor ID, Device ID = 0x8086, 0x24C2 Base Class, Subclass = 12, 3 => SERIAL_BUS_CTLR Interrupt = 9 BaseAddress[4] = 0xECA0 (I/O) ======================================================== Bus, Device, Function = 0, 29, 1 Vendor ID, Device ID = 0x8086, 0x24C4 Base Class, Subclass = 12, 3 => SERIAL_BUS_CTLR Interrupt = 5 BaseAddress[4] = 0xECC0 (I/O) ======================================================== Bus, Device, Function = 0, 31, 1 Vendor ID, Device ID = 0x8086, 0x24CB Base Class, Subclass = 1, 1 => MASS_STORAGE_CTLR Interrupt = 255 BaseAddress[0] = 0x0 (I/O) BaseAddress[1] = 0x0 (I/O) BaseAddress[2] = 0x0 (I/O) BaseAddress[3] = 0x0 (I/O) BaseAddress[4] = 0xECE0 (I/O) ======================================================== Bus, Device, Function = 0, 31, 3 Vendor ID, Device ID = 0x8086, 0x24C3 Base Class, Subclass = 12, 5 => SERIAL_BUS_CTLR Interrupt = 10 BaseAddress[4] = 0xF400 (I/O) ======================================================== Bus, Device, Function = 0, 31, 5 Vendor ID, Device ID = 0x8086, 0x24C5 Base Class, Subclass = 4, 1 => MULTIMEDIA_DEV Interrupt = 10 BaseAddress[0] = 0xE800 (I/O) BaseAddress[1] = 0xEC40 (I/O) BaseAddress[2] = 0xEFFFFC00 (Memory) BaseAddress[3] = 0xEFFFFF00 (Memory) ======================================================== Bus, Device, Function = 1, 7, 1 Vendor ID, Device ID = 0x0000, 0x0000 Base Class, Subclass = 0, 0 => PRE_20 Interrupt = 0 ======================================================== Bus, Device, Function = 1, 7, 2 Vendor ID, Device ID = 0x0000, 0x0000 Base Class, Subclass = 0, 0 => PRE_20 Interrupt = 0 ======================================================== Bus, Device, Function = 1, 7, 3 Vendor ID, Device ID = 0x0000, 0x0000 Base Class, Subclass = 0, 0 => PRE_20 Interrupt = 0 ======================================================== Bus, Device, Function = 1, 7, 4 Vendor ID, Device ID = 0x0000, 0x0000 Base Class, Subclass = 0, 0 => PRE_20 Interrupt = 0 ======================================================== Bus, Device, Function = 1, 7, 5 Vendor ID, Device ID = 0x0000, 0x0000 Base Class, Subclass = 0, 0 => PRE_20 Interrupt = 0 ======================================================== Bus, Device, Function = 1, 7, 6 Vendor ID, Device ID = 0x0000, 0x0000 Base Class, Subclass = 0, 0 => PRE_20 Interrupt = 0 ======================================================== Bus, Device, Function = 1, 7, 7 Vendor ID, Device ID = 0x0000, 0x0000 Base Class, Subclass = 0, 0 => PRE_20 Interrupt = 0 ======================================================== Bus, Device, Function = 1, 8, 0 Vendor ID, Device ID = 0x8086, 0x103A Base Class, Subclass = 2, 0 => NETWORK_CTLR Interrupt = 6 BaseAddress[0] = 0xEFDFF000 (Memory) BaseAddress[1] = 0xDCC0 (I/O) ======================================================== InitKitlNIC: Searching for PCI Ethernet NIC (dwIrq = 0, dwIoBase = 0, dwDfltType = 2) ... FindI825xx: Searching for I825xxx Ethernet NIC ... FindI825xx: Found Ethernet NIC 0x103A InitKitlNIC: Found Intel NIC (type = 10, IRQ=6, IOBase=0xDCC0). I825xxInitDMABuffer: Start. I825xxInitDMABuffer: End. I825xxInit: Start. eth825xx_init: Baseaddress = DCC0. nicInit link speed (100Mb). I825xxInit: End. Returned MAC Address:00:C0:08:82:8D:66 System ready! Preparing for download... OEMPreDownload ucLoaderFlags is 0 x86KitlCreateName: Using Device Name 'IA3236198' Using device name: IA3236198 Hit ENTER within 3 seconds to enter static IP address!InitDHCP():: Calling ProcessDHCP() ProcessDHCP()::DHCP_INIT Got Response from DHCP server, IP address: 10.11.2.112 ProcessDHCP()::DHCP IP Address Resolved as 10.11.2.112, netmask: 255.255.0.0 Lease time: 5184000 seconds Got Response from DHCP server, IP address: 10.11.2.112 No ARP response in 2 seconds, assuming ownership of 10.11.2.112 +EbootSendBootmeAndWaitForTftp Sent BOOTME to 255.255.255.255 Sent BOOTME to 255.255.255.255 Sent BOOTME to 255.255.255.255 Sent BOOTME to 255.255.255.255 Sent BOOTME to 255.255.255.255 Sent BOOTME to 255.255.255.255 Sent BOOTME to 255.255.255.255 Sent BOOTME to 255.255.255.255 Sent BOOTME to 255.255.255.255 Sent BOOTME to 255.255.255.255 Sent BOOTME to 255.255.255.255 Sent BOOTME to 255.255.255.255 Sent BOOTME to 255.255.255.255 Sent BOOTME to 255.255.255.255 Sent BOOTME to 255.255.255.255 Sent BOOTME to 255.255.255.255 Sent BOOTME to 255.255.255.255 Locked Down Link 1 Src IP 10.11.2.112 Port 0800 Dest IP 10.11.2.123 Port 05F6 EthDown::TFTPD_OPEN::boot.bin -EbootSendBootmeAndWaitForTftp Download file information: ----------------------------------------------------- [0]: Address=0x220000 Length=0xF78E94 Name= ****** OEMVerifyMemory Checking Range [ 0x220000 ==> 0x1198E93 ] ****** RAM Address ****** rom_offset=0x80000000. ROMHDR at Address 00220044h OEMLaunch ucLoaderFlags is 7 Download successful! Jumping to image at 00225738h... Got EDBG_CMD_JUMPIMG Got EDBG_CMD_CONFIG, flags:0x00000000 Lauch Windows CE from address 0x225738 Debug Serial Init SysInit: GDTBase=811990e8 IDTBase=811ba860 KData=811c1800 Windows CE Kernel for i486 Built on Feb 8 2007 at 23:34:04 g_pPageDir = 811db000 RTC - Status Reg B - 0x02 X86Init done, OEMAddressTable = 80225758. OEMIoControl: Unsupported Code 0x101008c - device 0x0101 func 35 The same happens if I load the nk.bin from the CF I'm using as local disk. Can anybody help me? Thanks Alessandro Tag: WinCE Support BDA? Tag: 110957
- Next
  - 1
    - Can't hit a breakpoint in CETK source I am trying to debug a GDI CETK failure, but I cannot hit a breakpoint in some source code (I have the shared source installed) that I know is being executed. I believe this is a problem with the Source Path Mapping, but my efforts to fix it have fallen short so far. I looked into the gdiapi.pdb and ddi_test.pdb files and found references to files in the following directories: C:\ymzki\ C:\yzqa\ C:\yzqasp1\ Using the Source Path Mapping tool in PB, I mapped these paths to my Wince root, which is F:\WCE6\WINCE600. Still, I cannot get a breakpoint to hit, or even to show up as a full red circle (I get the unrecognized empty red circle instead). Any pointers on getting a CETK source code breakpoint recognized? Am I missing anything here? Thanks, Danny Tag: WinCE Support BDA? Tag: 110953
  - 2
    - Autostarting .exe at CE boot I've been doing embedded work for 20 years but I'm new to CE. I kinda got this project dropped on me and time is short. We need to modify an existing and running CE system so that it autostarts a newly written .exe file/app. App is in C#, .net cf 2.0, VS2005. It deploys -- ActiveSync -- and executes on the CE system. We have and can modify the BSP and app source. I've been through various docs several times and have yet to get whatever right! I need to add the .exe to CE such that it autostarts at CE boot. Could someone provide a concise but adequate list of the exact steps we need to do to make that work? Tag: WinCE Support BDA? Tag: 110951
  - 3
    - OTi 2172 USB Flash Disk Controller 1Hi, I got a board with OTi 272 USB Flash Disk Controller. What should I do to get Wince 6 to load the necessary drivers and recognizes the nand flash memory? Do I need a driver (OYi does not mention any driver for 2172 on it's site) Do I need to change some registry settings? Thanks Tag: WinCE Support BDA? Tag: 110950
  - 4
    - Accuracy problem in my Touch Driver Hello All, My Touch driver is not working very accurately... when am touching letters or numbers,sometimes BLANK is coming instead of letter or number. And if type something it is deleting the previous character or number (i.e if i type 9 and 2,after i have pressed 2 it is deleting 9) Except the above all the operation like drawing or signature in the notes,calibrations are working fine... Can you please tell me where could be the problem? Thanks in advance Regards Senthil Tag: WinCE Support BDA? Tag: 110948
  - 5
    - soft keyboard driver I need to modify the sip(software based input panel) in order to support multi-language. I can find the sip is implemented by softkb.dll and the softkb.def says it is composed of SIP_init(), SIP_open(),,,. But I can't find where the source code of softkb.dll is. I need to add some country's keyboard layout to the SIP which is not supported by PB5 default but I can't do it because I didn't find the source code. Is there anybody who can introduce some guide? Tag: WinCE Support BDA? Tag: 110946
  - 6
    - Does SDBUS support multiple SDHC? Hi All, Currently I am developing a system wtih multiple SD host controller. I meet some issues when card inserted and SD controller could not work well. As I looked into the source code, I found the sdhc controller dll has been load several times and setup different objects for each controller. But SDBUS only be loaded one time. Could this be the issue to impact my design? Any comments are welcome. Thanks in advance. -jimmy Tag: WinCE Support BDA? Tag: 110942
  - 7
    - WM6 device emulator VS cellular emulator Hi ~ Can anyone tell me how build WM6 pro device emulator image that phone function work with "Cellular emulator"? Any information will be appreciated. Thank you Cheers, SP Tag: WinCE Support BDA? Tag: 110937
  - 8
    - Command line build Hello, I've set up an Windows Embedded CE 5.0 O/S design. The SYSGEN works fine. I want to run an unattended build on a dedicated machine. The recent source files will be fetched from CVS. I found the "blddemo -q" in the workspace directory of the O/S design would do the job as long as no SYSGEN variables have been changed. What would be the general approach to rebuild the O/S design. The precompiled libs in PUBLIC and PRIVAT must keeped untouched. Andreas Tag: WinCE Support BDA? Tag: 110935
  - 9
    - KITL Stops polling? I am able to see full functionality of KITL as the device boots. I placed a debug message in OEMEthGetFrame, and I can see every time KITL polls that function to see if debug data is there. However, once the device is done loading, KITL does not call OEMEthGetFrame at all.. It is as if it decided to stop polling. If I run an application that prints a DBGMSG across KITL, then it seems that OEMEthGetFrame gets called again! (just once). My system is in fact set up to use polling: pKitl->Interrupt = KITL_SYSINTR_NOINTR; // use polled mode Below is my debug serial output followed by KITL messages in PB any ideas? Debug serial: ------------------------ Launch: 96CB9000h... ****************************************************** ****************************************************** ****************************************************** ****************************************************** ****************************************************** OEMInitDebugSerial using STUART Windows CE Kernel for ARM (Thumb Enabled) Built on Jan 23 2006 at 13:14:44 ProcessorType=0411 Revision=7 sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 96cb94fc Memory controller MDREFR= 11e018 MDCONF= b000bcb MSC0= b9fab9fa MSC1= 7ff07ff4 MSC2= 7ff0fff4 Addr driver globals ba8bb000 Unique ID: 7216:028c:4552:1216 ethernet mac addr 1500 - bfc5 - be89 Addr driver globals ba8bb000 Storing MAC address LAN91C111 MAC Address: 2X- 2X- 2X- 2X- 2X- 2XGPIOReg->GPDR0 = 0xcc98c10 GPIOReg->GAFR0_L = 0x80000000 GPIOReg->GAFR0_U = 0xa5000092 GPIOReg->GPDR1 = 0xcf8880 GPIOReg->GAFR1_L = 0x60918a18 GPIOReg->GAFR1_U = 0xaaa5a0aa GPIOReg->GPDR2 = 0x130c000 GPIOReg->GAFR2_L = 0x6a0aaaaa GPIOReg->GAFR2_U = 0xa400 GPIOReg->GPDR3 = 0x2efc0 GPIOReg->GAFR3_L = 0x0 GPIOReg->GAFR3_U = 0x0 GPIOReg->GPDR1 = 0xcf8880 GPIOReg->GRER1 = 0x0 +OEMKitlInit Checking for LAN91C111 Ethernet controller at B6B00000... Storing MAC address LAN91C111 MAC Address: 2X- 2X- 2X- 2X- 2X- 2X LAN91C111 Configuration Register: 2X LAN91C111 Base Address Register: 2X LAN91C11 1 Revision: 2, Chip: 9 Reading MAC address LAN91C111 MAC Address: 2X- 2X- 2X- 2X- 2X- 2XLAN91C111 Ethernet controller initialized. InitSpecifiedEthDevice: SMSC controller returned: 0.21.197.191.137.190 SMCSetOptions() Dump Driver_Globals (ether stuff only) at : 0xBA8BB000 pDriverGlobals->eth.EbootMagicNum= 0x45424F54 pDriverGlobals->eth.etherEnabled= 0x0 pDriverGlobals->eth.etherFlags= 0x0 pDriverGlobals->eth.TargetAddr.dwIP= 0xCA03A8C0 pDriverGlobals->eth.TargetAddr.wMAC[0]= 0x1500 pDriverGlobals->eth.TargetAddr.wMAC[1]= 0xBFC5 pDriverGlobals->eth.TargetAddr.wMAC[2]= 0xBE89 pDriverGlobals->eth.TargetAddr.wPort= 0x1B07 pDriverGlobals->eth.DownloadHostAddr.dwIP= 0xC803A8C0 pDriverGlobals->eth.DownloadHostAddr.wMAC= 0xBA8BB91C pDriverGlobals->eth.DownloadHostAddr.wPort= 0x1B07 pDriverGlobals->eth.DbgHostAddr.dwIP= 0x0 pDriverGlobals->eth.DbgHostAddr.wMAC= 0xBA8BB928 pDriverGlobals->eth.DbgHostAddr.wPort= 0x0 pDriverGlobals->eth.KdbgHostAddr.dwIP= 0x0 pDriverGlobals->eth.KdbgHostAddr.wMAC= 0xBA8BB934 pDriverGlobals->eth.KdbgHostAddr.wPort= 0x0 pDriverGlobals->eth.PpshHostAddr.dwIP= 0x0 pDriverGlobals->eth.PpshHostAddr.wMAC= 0xBA8BB940 pDriverGlobals->eth.PpshHostAddr.wPort= 0x0 pDriverGlobals->eth.SubnetMask= 0xFFFFFF pDriverGlobals->eth.DHCPLeaseTime= 0x15180 pDriverGlobals->eth.EdbgFlags= 0x0 OEMether IP Addr: 192.168.3.202 OEMether IP netmask: 255.255.255.0 OEMether SMSC on SYSINTR 32: 0 OEMether SYSINTR -1: -14668 Device ISOCHRON35262, IP 192.168.3.202, Port 981 Calling EdbgInitDHCP -OEMKitlInit Got Packet: 98 Host connected Host IP: 192.168.3.200, port 1804 KeyIndex 0 = -1 KeyIndex 1 = -1 KeyIndex 2 = -1 KeyIndex 3 = -1 KeyIndex 4 = -1 KeyIndex 5 = -1 KeyIndex 6 = -1 KeyIndex 7 = -1 +KITLRegisterDfltClient, service:0 +KITLRegisterDfltClient, service:1 KITLGlobalState == 0x61 KitlInit Passed Waiting for service 'DBGMSG' to connect..., fUseSysCalls = 0 ProcessAdminMsg: Receive Config message for service DBGMSG ProcessAdminMsg: Receive Config message for service DBGMSG ProcessAdminMsg: Receive Config message for service PPSH ProcessAdminMsg: Receive Config message for service DBGMSG ARMInit done. +KITLRegisterDfltClient, service:2 ProcessAdminMsg: Receive Config message for service KDBG ProcessAdminMsg: Receive Config message for service KDBG KITL: Leaving polling mode... KITL Checking client registrations +RegisterClientPart2: Id 0x00000000 KITL Timer thread started, (hTh: 0x0A4FFF86, pTh: 0x8A4FCB48) -RegisterClientPart2 +RegisterClientPart2: Id 0x00000001 -RegisterClientPart2 0x8a1dc604: TAPI:OldAddTapiDevice RegQueryValueEx(Tsp) returned 2 0x8a1dc604: TAPI:OldAddTapiDevice RegQueryValueEx(Tsp) returned 2 Platform Builder debug (kitl): ----------------------------------------- Kernel debugger is waiting to connect with target. Kernel debugger failed to connect with target (KDBG open stream failed). Debugger could not initialize connection. Kernel debugger is waiting to connect with target. 0 PID:0 TID:0 Booting Windows CE version 4.20 for (ARM) 0 PID:0 TID:0 &pTOC = 96cc19dc, pTOC = 97a0c770, pTOC->ulRamFree = 97a4a000, MemForPT = 00000000 0 PID:0 TID:0 Old or invalid version stamp in kernel structures - starting clean! 0 PID:0 TID:0 NKEnumExtensionDRAM 0 PID:0 TID:0 Added memory at: 96d4a4f4 for length 7d8 0 PID:0 TID:0 Configuring: Primary pages: 11186, Secondary pages: 16380, Filesystem pages = 6891 0 PID:0 TID:0 Booting kernel with clean memory configuration: 0 PID:0 TID:0 Memory Sections: 0 PID:0 TID:0 [0] : start: 97a4b000, extension: 00003000, length: 02bb2000 0 PID:0 TID:0 [1] : start: 86500000, extension: 00004000, length: 03ffc000 0 PID:0 TID:0 Sp=ffffc7cc 2 PID:0 TID:0 Windows CE KernelInit 4294767297 PID:a4ff002 TID:a4ff262 Updated eptr->e32_vsize to = 000bb000 4294767315 PID:a4ff002 TID:a4ff262 Scheduling the first thread. 4294767347 PID:a4ff002 TID:a4ff262 0x8a4ff024: KernelInit2: pCurThread=8a4ff024 hCurThread=0a4ff262 hCurProc=0a4ff002, KernelInit = 96cdd27c 4294767374 PID:a4ff002 TID:a4ff262 0x8a4ff024: Detecting VFP... 4294767406 PID:a4ff002 TID:a4ff262 0x8a4ff024: VFP Not Found! 4294767439 PID:a4ff002 TID:a4ff262 0x8a4ff024: Updated eptr->e32_vsize to = 00016000 4294767484 PID:a4ff002 TID:a4ff262 0x8a4ff024: >>> Loading module NK.EXE at address 0x96CB8000-0x96D73000 (RW data at 0x97A16000-0x97A42F67) Kernel debugger connected (KDBG stream opened). Kernel Version 1169 loaded at 0x96cb8000, data relocated at 0x97a16000 Debugger connection established (Target CPU is ARM). Loaded symbols for 'C:\WINCE420\PROJECT\HIAD\RELDIR\BVDMAIN-ARMV4IDEBUG \NK.EXE' Loaded symbols for 'C:\WINCE420\PROJECT\HIAD\RELDIR\BVDMAIN-ARMV4IDEBUG \KD.DLL' Finished re-loading kernel modules. 4294767541 PID:a4ff002 TID:a4ff262 0x8a4ff024: first = 01d40000, last = 02000000, SharedDllBase = 027b0000 4294768479 PID:a4ff002 TID:a4ff262 0x8a4ff024: >>> Loading module coredll.dll at address 0x03F10000-0x03FF7000 (RW data at 0x01FFF000-0x01FFFFB8) Loaded symbols for 'C:\WINCE420\PROJECT\HIAD\RELDIR\BVDMAIN-ARMV4IDEBUG \COREDLL.DLL' 4294769063 PID:2a40fb22 TID:2a40fafe 0x8a40f8c0: >>> Loading module filesys.exe at address 0x04010000-0x04091000 Loaded symbols for 'C:\WINCE420\PROJECT\HIAD\RELDIR\BVDMAIN-ARMV4IDEBUG \FILESYS.EXE' 4294769107 PID:2a40fb22 TID:2a40fafe 0x8a40f8c0: FileSystem Starting - starting with clean file system ..... 4294794536 PID:89f59c1e TID:9b0247e 0x89ae5660: NOTIFICATION::XCeRunAppAtEvent 4294794560 PID:89f59c1e TID:9b0247e 0x89ae5660: NOTIFICATION::SetUserNotification (or replacing 00000000) 4294794587 PID:89f59c1e TID:9b0247e 0x89ae5660: NOTIFICATION::SetUserNotification::Registring system watch: event 12 app \\.\Notifications\NamedEvents\DSTTzChange args AppRunAfterTzChange 4294794620 PID:89f59c1e TID:9b0247e 0x89ae5660: NOTIFICATION::XCeRunAppAtEvent 4294794646 PID:89f59c1e TID:9b0247e 0x89ae5660: NOTIFICATION::SetUserNotification (or replacing 00000000) 4294794673 PID:89f59c1e TID:9b0247e 0x89ae5660: NOTIFICATION::SetUserNotification::Registring system watch: event 1 app \\.\Notifications\NamedEvents\DSTTimeChange args AppRunAfterTimeChange 4294794715 PID:6a32d552 TID:8a2e9a5e 0x89cbd4a8: OpenSwMixer - no mixer found 4294794739 PID:6a32d552 TID:8a2e9a5e 0x89cbd4a8: SPS - open failed : 0x1 4294794819 PID:69b5782a TID:69b57806 0x89b02000: <<< Unloading module usbcnect.exe at address 0x10010000-0x10014000 Unloaded symbols for 'C:\WINCE420\PROJECT\HIAD\RELDIR\BVDMAIN- ARMV4IDEBUG\USBCNECT.EXE' 4294804485 PID:6a32d552 TID:ea25182a 0x8a0c98c0: *TCBTimeout: ClearIdleTimerReset 4294804509 PID:6a32d552 TID:ea25182a 0x8a0c98c0: TCBTimeout: setting fTCBTimerOn to 0 4294804536 PID:6a32d552 TID:ea25182a 0x8a0c98c0: *TCBTimeout: NOT Restarting TCBTimer 4294809404 PID:6a32d552 TID:ea25182a 0x8a0c98c0: IPRouteTimeout: setting fIPRouteOn to 0 4294809422 PID:6a32d552 TID:ea25182a 0x8a0c98c0: *IPRouteTimeout: NOT restarting IPRouteTimeout Tag: WinCE Support BDA? Tag: 110931
  - 10
    - Cannot open the properties of "TCP Connect Transport" Hello, I have strange troubles with the Remote Tools of Visual Studio 2005. I start the Remote Tools using the link in the Start Menu. Than I open the dialog "Target > Connectivity Options". In the list I mark my WinCE6.0 device and hit the "Properties..." button. Now my problem appears: In the dialog "Device Properties" I cannot configure the transport "TCP Connect Transport". If I click on the button "Configure..." no dialog will be opened. Interestingly I can configure the properties of "TCP Connect Transport" using Visual Studio 2005 without any troubles. Does anybody know why I cannot configure "TCP Connect Transport" using the Remote Tools? Regards Peter Tag: WinCE Support BDA? Tag: 110924
  - 11
    - VoIP codec from CE 5.0 As I known, CE 5.0 support G.711 codec only. If I need to use other enhanced codec, such as G.729, how could I do? Is there any solution ready vendor for VoIP G.729 codec? Tag: WinCE Support BDA? Tag: 110922
  - 12
    - usbfn mass storage not showing folder in the PC Hi all, I am trying to exposes my storage in my device as mass storage to PC. Wince 5.0 is running on the device.I used the following registry settings ================================================================================= [HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers] "DefaultClientDriver"=- ; erase previous default [HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers] "DefaultClientDriver"="Mass_Storage_Class" [HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers\Mass_Storage_Class] "Dll"="usbmsfn.dll" "InterfaceSubClass"=dword:06 "InterfaceProtocol"=dword:50 "DeviceName"="DSK1:" "FriendlyName"="Mass Storage" ; idVendor must be changed. 045E belongs to Microsoft and is only to be used for ; prototype devices in your labs. Visit http://www.usb.org to obtain a vendor id. "idVendor"=dword:045E "Manufacturer"="Generic Manufacturer (PROTOTYPE--Remember to change idVendor)" "idProduct"=dword:FFFF "Product"="Generic Mass Storage (PROTOTYPE--Remember to change idVendor)" "bcdDevice"=dword: ===================================================================================== When i connect the device to the host PC.PC is detecting it is mass storage but i am not able to view the folder in the my computer. I can see the icon of mass storage in "safety remove hardware".During this period my "DSK1:" on the device is also unmounted. Anyone know what might be the issue? Prabu Kumar Tag: WinCE Support BDA? Tag: 110918
  - 13
    - X86 assembler Hello all, Wince 6.0 vs 2005. What assembler(ml.exe) does wince 6.0 x86 uses? MASM is 32 bit or 16 bit? If it is 32 bit then how we shall use it for assembling boot loader code? Tag: WinCE Support BDA? Tag: 110917
  - 14
    - problem running norom.ini Hi, I am trying to load and run 2410test.axf. This is being done to flash u-boot. To run 2410test.axf, norom.ini should be run. But I am not able to run norom.ini. Reference documents say I have to exectute "ob <path>/ norom.ini" command, but "ob" is not recognized as a valid command. I am using AXD as the debugger. I think an answer to either of the two questions mentioned below will solve the problem: 1) What is the command to be added into startice.cmd so that norom.ini will be executed when AXD is invoked? 2) What to do to execute "ob <path>/norom.ini" command? Do I need to install something for this? Thanks in advance, Sharafuddeen Tag: WinCE Support BDA? Tag: 110916
  - 15
    - PB5 & default language English (UK) hello all, my platform is been configurated with different language as Chinese, French, Italian, English (UK), Spain etc ... when in "Platform settings - Locale - Default language set Italian language or French for example, the platform rebuild correctly without error. Why if I set as default language English (UK) my platform rebuild fails ? In the output widows the error is : "Could not find file 'C:\63720461\RelDir\VIA_Twister_x86_Release\intlfile\0809\RGUI_ChangePassword_Loc.js' on disk" -- Thanks, stefano Tag: WinCE Support BDA? Tag: 110913
  - 16
    - AC97 Win CE 5.0, PXA270 There is a bug in the PXA270 AC97 driver. If 'expireTime' get set to 0xFFFFFFFF the last while will hang forever in the last while loop // // XllpOstDelayTicks // // Delay the number of ticks specified using the OST OSCR0 clock. // // Inputs: // pOstRegs - handle to structure containing the OST a base register // addresses. // ticks - the unsigned 32-bit value containing the number of // ticks to delay // static void XllpOstDelayTicks (P_XLLP_OST_T pOstRegs, XLLP_UINT32_T ticks) { XLLP_UINT32_T expireTime, time; time = pOstRegs->oscr0; expireTime = time + ticks; // // Check if we wrapped on the expireTime // and delay first part until wrap // if (expireTime < time) { while (time < pOstRegs->oscr0); } while (pOstRegs->oscr0 <= expireTime); return; } Tag: WinCE Support BDA? Tag: 110912
  - 17
    - ~strings.pbcxml Hi All If I make a new BSP(No clone BSP) that didn't be supported in PB6.0, how can I make two "BSPNAMEstrings.pbcxml" file in "C: \WINCE600\PLATFORM\NEWBSP\CATALOG\1033,\1041"? Do I edit the strings.pbcxml by myself ? Currently, I have converted CEC file into pbcxml file and WindowsCE 6.0 booting is OK in my H/W without "~strings.pbcxml". Best Regards JJang Tag: WinCE Support BDA? Tag: 110910
  - 18
    - AYGShell Hi All What is the AYGShell API Set and what would I typically use it for? Best Regards -- Phil Tag: WinCE Support BDA? Tag: 110897
  - 19
    - Composite driver Hi all, I am trying to integrate composite driver with my BSP. My function controller driver is working fine if i am not using composite driver. When I use it, I am unable to see the folder on my Desktop PC. I guess it is not working correctly. I have certain doubt that 1. In composite driver case, how to find out that the OS will support it or not. 2. I am using using ClientList as USBSer_Class and Mass_Storage_Class and driver installed in this case is wceusbsh.sys, wceusbsh.inf and usbstor.sys, usbstor.inf. I want to know, should I add Interface number here. 3. Should composite driver use Interface Association Descriptor. 4. I can see the icon of mass storage in "safety remove hardware" application but can not see the folder. Please guide me thoroughly. Thanks you very much in advance. Best regards, Mukesh Modi Tag: WinCE Support BDA? Tag: 110894
  - 20
    - Updating BIOS in Windows CE!! Hi, I'm working on a X86 board which has Windows CE 4.2 OS. The board has the SST49LF080A chip ( 8 MB ) for storing the BIOS with size of 1 MB. The BIOS chip is connected to south bridge via LPC bus. I need to write a application which should take the new BIOS from USB or Compact flash and should write it in the SST ROM chip. How to do this? Any driver is available with Windows CE 4.2 ( FMD drivers?? ). Kindly help me regarding this. Regards, Kumar Tag: WinCE Support BDA? Tag: 110893
  - 21
    - How to test SD Client driver....... hi all! I got SD Client driver which acts as network adapter for my wireless device. If i need to test my driver, does CETK got wifi specific test cases so that i can check my driver stability. if i need to test my sd client driver what are the test cases i need to run. U'r help is really appreciated. Thanks, Ragz..... Tag: WinCE Support BDA? Tag: 110892
  - 22
    - Diskpart utility help !!! Hi all, Could anyone guide me to build bsect.img for exfat wince 6.0. As i am getting linker error while linking bsec.com. Also when i tried with FAT16 file system i am getting "unable to load bldr !"(when tried to make bootable using diskpart). Could anyone tell how to compile bsect.img file? Thanks... Tag: WinCE Support BDA? Tag: 110889
  - 23
    - Hive Based Registry Stop's Image to Run. Hi to Everybody I am using winCE 5.0. and i face two problems in creating and running the image. 1:- i create an extended partition of 25MB but when i copy data from SD card more than 14.4 MB the image is curropted. 2:- I include the Hive-based registry in the image, Unfortunately now the image load kernel and other setting but it hangs aftre this messege... Windows CE Firmware Init INFO: Initializing system interrupts... INFO: Initializing system clock(s)... INFO: Initializing driver globals area... SDMMC config set rGPGCON: 46ab9a OEMInit Done... Sp=ffffc7cc OEMSetRealTime: Year: 3, Month: 1, Day: 1, Hour: 12, Minute: 0, second: 0 rcnr=1h ------------------------------------------------------------------------------ ------- My Registry settings are as under..... ; @CESYSGEN IF FILESYS_FSREGHIVE ; HIVE BOOT SECTION [HKEY_LOCAL_MACHINE\init\BootVars] "SYSTEMHIVE"="system.hv" "PROFILEDIR"="Documents and Settings" "Start DevMgr"=dword:1 "RegistryFlags"=dword:1 ; END HIVE BOOT SECTION ; @CESYSGEN ENDIF FILESYS_FSREGHIVE ; Resources available at time of device.exe initialization. ; Key names are descriptive; resource ids are definitive. ; System ids are defined in ddk\inc\resmgr.h. ; HIVE BOOT SECTION [HKEY_LOCAL_MACHINE\Drivers\Resources\IRQ] "Identifier"=dword:1 "Minimum"=dword:1 "Space"=dword:20 "Ranges"="1-0x20" ; "Shared"="" [HKEY_LOCAL_MACHINE\Drivers\Resources\IO] "Identifier"=dword:2 "Minimum"=dword:0 "Space"=dword:10000 "Ranges"="0-0xFFFF" ; END HIVE BOOT SECTION ------------------------------------------------------------------- Any help will be appericiated.. Tag: WinCE Support BDA? Tag: 110878
  - 24
    - EHCI Driver in Ce 6.0 Hi All, I would like to know about the reusability of EHCI host driver code avialable with CE 6.0. The CE 6.0 code descriptions of EHCI driver says that it is compatible to EHCI 1.0 standard. My device has a SH4 processor and it has USB EHCI controller builtinto it(EHCI 1.0). I am trying to use the CE standard code for this host controller. From my initial study I feel that the code is completly reusable . The change I have to make is the registry specific entries to specify the address of my Host controller instead of the current PCI based registry entries. Am I right? i.e. Is this Ce 6.0 EHCI host controller code reuable for any USB host controller that meets the EHCI 1.0 Spec? Expecting your valuable reply. regards Bijesh V.M. Tag: WinCE Support BDA? Tag: 110873
  - 25
    - Waveform audio and microphone Hi I use a PXA270 device with a BSP cloned from Mainstone III. I have just inserted the AC97 Audio driver and Waveform Audio support. I Have also added the Mediaplayer sample component. When my Kenerl image starts i can hear sound and WAV. Now i would like to test my microphone, but i don't find any microphone configuration utility or any recording software. How can i test the micropohone? Which kind of components should i put inside my Runtime Image in order to get microphone working? Best Regards Rudy Barbieri rudy.barbieriCHIOCCIOLAdestura.it Tag: WinCE Support BDA? Tag: 110872

Dear All,

I am studying how to set up a complete direct show filter chain for digital
TV player.
I find Microsoft provide Broadcast Driver Architecture to support receiveing
and displaying broadband digital and analog broadcasts on Windows XP.

Does WinCE have BDA?
If no, what can I follow to create my own DS filter?
Thanks

Top

Re: WinCE Support BDA? by Paul

Paul
Tue Mar 25 08:42:27 PDT 2008

Not that I've ever heard of, no. I don't know enough about it to point you
to something. I suspect that you'd be creating the entire structure from
receiver driver to whatever gets done with the audio and video.

Paul T.

"C.L" <CL@discussions.microsoft.com> wrote in message
news:9707D35F-3B9C-47D6-8BE0-4A29B5539491@microsoft.com...
> Dear All,
>
> I am studying how to set up a complete direct show filter chain for
> digital
> TV player.
> I find Microsoft provide Broadcast Driver Architecture to support
> receiveing
> and displaying broadband digital and analog broadcasts on Windows XP.
>
> Does WinCE have BDA?
> If no, what can I follow to create my own DS filter?
> Thanks

Top