Where are my drivers

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - PCMCIA reader problem I have a ActionTec PCI750 PCMCIA reader. I built a CEPC followed the tutorial except add PCMCIA(TI1250) feature. I am using PB 4.2 to build it and no error/warning. But after downloading, the target CEPC reboot again and image downloaded again. The reboot/downloading repeats again and again - more than 10 times until I disconnect or shut down target PC. But using PB4.1, no such a problem. why? Tag: Where are my drivers Tag: 38862
  - 2
    - boot CEPC from hard disk First, I have built a CEPC with KITL enabled followed the help file "How to ...". And everything is OK. Then, I built same CEPC with KITL disabled(renamed as NO_KITL_NK.bin). I copied it to target CEPC hard disk and rename back to NK.bin. Now my hard disk has 2 files: nk.bin and BLDR. Then I restart my CEPC. But system halted there - black screen with 1 cursor blinking on left top corner. Which step I missed? Thanks for all your inputs. Tag: Where are my drivers Tag: 38859
  - 3
    - QFE question If I installed current QFE(April - June 2003). Do I need to install old QFEs? Tag: Where are my drivers Tag: 38854
  - 4
    - QFE question If I installed current QFE(April - June 2003). Do I need to install old QFEs? Tag: Where are my drivers Tag: 38853
  - 5
    - newbie question: bootable OS image Hi, I built a platform builder project for "PDA or Mobile Handheld", then I downloaded the 'nk.nb0' file (from release directory) to my development board (DBPXA250), but my development board didn't started the Windows CE. How could I create a bootable WCE image? I would like to use the JTAG cable to write my OS image and then restart my development board and then see the WCE running. thanks in advance. -- Edgard Lima Tag: Where are my drivers Tag: 38840
  - 6
    - WMI This is a multi-part message in MIME format. ------=_NextPart_000_0019_01C355A4.9C790440 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable Is WMI supported on any CE/PPC platform? If not, are there any plans to = support it in the future? ------=_NextPart_000_0019_01C355A4.9C790440 Content-Type: text/html; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Dwindows-1252"> <META content=3D"MSHTML 6.00.2800.1170" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff> <DIV><FONT size=3D2>Is WMI supported on any CE/PPC platform? If not, are = there any=20 plans to support it in the future?</FONT></DIV></BODY></HTML> ------=_NextPart_000_0019_01C355A4.9C790440-- Tag: Where are my drivers Tag: 38836
  - 7
    - PB 4.2 ignoring BOOTME requests So I've finally got my bootloader sending bootme broadcasts over the network (tested with a packet sniffer and contents look sane) but PB 4.2 just says "Waiting for BOOTME" . The device name appears in the list of Available Devices for download, but PB seems to be ignoring the bootme requests. The network setup is reasonably simple - the dev board and the second network card in my PC are connected via a hub. Is there any extra logging information that might help me locate the source of this problem? Many Thanks, James Tag: Where are my drivers Tag: 38834
  - 8
    - CE4.2 hangs up on 10 second when click disabled control subj On CE4.1 such wasn't Regards Olefard Tag: Where are my drivers Tag: 38831
  - 9
    - NDIS EnterCriticalSection DEBUGCHK in CE 4.2 - HELP! Hey guys. I've been dealing with this problem for a while now, hoping that it would somehow get fixed. Unfortunately, it's still a problem for me, and it's getting more annoying and more troublesome as time goes on. Here's my original post on the subject: http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&oe=UTF-8&safe=off&threadm =3f030f26%241%40news.microsoft.com&rnum=8&prev=/groups%3Fq%3DMurawski%2Bgrou p:microsoft.public.windowsce.platbuilder%26hl%3Den%26lr%3D%26ie%3DUTF-8%26oe %3DUTF-8%26safe%3Doff%26scoring%3Dd%26selm%3D3f030f26%25241%2540news.microso ft.com%26rnum%3D8 Here's a post from Steve Maillet where he lists it as bug #7 in his list of known CE 4.xx bugs: http://groups.google.com/groups?q=Maillet+group:microsoft.public.windowsce.p latbuilder&start=90&hl=en&lr=&ie=UTF-8&oe=UTF-8&safe=off&scoring=d&selm=eB72 YpWQDHA.2316%40TK2MSFTNGP12.phx.gbl&rnum=97 Basically, what's happening is this. When I have a PCMCIA card in my device at cold boot, NDIS occasionally hits a DEBUGCHK in the kernel when trying to enter a critical section that has never been initialized. Since I don't have access to NDIS code, I can't really tell what's going on, but the call stack looks like this: <stack dump> COREDLL!EnterCriticalSection(CRITICAL_SECTION * 0x01fd98c0 PcmciaMemListLock) line 90 + 76 bytes NDIS!mapAllWindowsForHSock(_CARD_SOCKET_HANDLE {...}, int 0x00000001, int (_NDIS_PCMCIA_WINDOW *)* 0x03d6a954 npwMapToDevice(_NDIS_PCMCIA_WINDOW *)) line 478 NDIS!PcmciaCallBack(unsigned int 0x00000040, _CARD_SOCKET_HANDLE {...}, _CARD_EVENT_PARMS * 0x080afdf0) line 620 PCMCIA!CallClient(unsigned int (unsigned int, _CARD_SOCKET_HANDLE, _CARD_EVENT_PARMS *)* 0x00000000, unsigned int 0x01fa8aa0, _CARD_SOCKET_HANDLE {...}, _CARD_EVENT_PARMS * 0x00000000, _CLIENT_DRIVER * 0x2dfa5fda) line 600 + 24 bytes PCMCIA!CallbackThread(unsigned int 0x00000000) line 910 + 56 bytes COREDLL!ThreadBaseFunc(void * 0x03a6aecc CallbackThread(unsigned int), unsigned long 0x00000000) line 418 + 16 bytes </stack dump> Unfortunately, this problem is probably much more serious for me than it is for most CE platforms. Our device ALWAYS has a PCMCIA card in it, and it goes through a cold boot quite often. I seem to hit this problem almost every time my platform boots. To make things worse, about 50% of the time when it happens, and I try to run past the DEBUGCHK, I hit another critical access violation in NDIS. (I guess there's a critical section somewhere for a reason!) Does anyone have any new information on this problem? Any suggestions on what I should do? I've been dreading trying to call Microsoft about it directly. I haven't had much luck trying to describe problems of anything beyond trivial technical complexity with the first one or two levels of technical support. Should I suck it up and put in a call on this one? Thanks in advance guys. Mark Murawski Vocollect, Inc. Tag: Where are my drivers Tag: 38827
  - 10
    - Batch build makeimg wince300 Hello, I am trying to configure a command line build for our project under WinCE 3.0. I want to be able to make an image of my platform (from the build directory) without having Platform Builder installed. We want this particular configuration, so that the application programmer in our firm will be able to build new images without having to install PB (since they won't use it anyway). To realize it, I copied the build directory of my project (which have the files generated after the the buildrel phase) and I've created a bat file which contains set all the necessary variables and path. I also copied the C:\WINCE300\PUBLIC\COMMON\OAK\BIN\I386 (to be able to use makeimg.exe and the programs needed to create the image). To use this package, I copy all the files in c:\wince300Img and then I run my batch file to set the variable and then I called makeimg to build the image. I test it and it works great on a computer with PB 3.0 already installed, but It doesn't work on my test machines which don't have PB installed (which is my goal!) On my test machines, the makeimage build stop always after the InitRegistry phase, and before it copies nknodebug.exe to nk.exe (I know that before I compared it with a "working" make image). Here's a snapshot: (...) InitRegistry Finished (875 lines). MAKEIMG: localization SKIPPED since COUNTRY is unchanged Windows CE ROM Image Builder v3.0 Copyright (c) 1995-2000 Microsoft Corporation Failed romimage c:\WINCE300Img\rev_5_16\release\ce.bib Failed romimage c:\WINCE300Img\rev_5_16\release\ce.bib I really don't understand what I am doing wrong. I must be forgetting a setting somewhere. I checked and re-checked all the system variables between my test machines and my machine with PB and everything is the same. I also try to copy the PB directory (and adding it to my path and CEPBDir variable) to one of my test machine to check if maybe a file was needed there... but I also had no luck. Here's the list of the system variable that I am setting in my batch file. rem ----------------------- rem Environment Settings rem ----------------------- SET DRIVE=c: Set ComSpec=C:\WINDOWS\system32\cmd.exe Set COUNTRY=USA Set IMGNODEBUGGER=1 Set _HOSTCPUTYPE=i386 Set _TGTCPUTYPE=MIPS Set _WINCEROOT=%DRIVE%\WINCE300Img\rev_5_16 Set _PUBLICROOT=%_WINCEROOT% Set _FLATRELEASEDIR=%_WINCEROOT%\release Set BIRCH=1 Set BUILD_DEFAULT=-e -w -nmake -i Set CEPBDir=C:\Programme\Windows CE Platform Builder\3.00 Set COUNTRY=USA Set HOMEDRIVE=C: Set HOMEPATH=\ Set IMGFLASH=1 Set IMGNODEBUGGER=1 Set MAXALL2_NOCURSOR=1 Set USE_DBGSER=NONE Set WINCECOD=1 Set WINCEDEBUG=retail Set WINCEMAP=1 Set _CURSLMTREE=pnt Set _DEPTREES=winceos msmq ie wceshell wceshellfe wceapps wceappsfe Set _PLATFORMDRIVE=C: Set _TGTCPU=R3000 Set _TGTCPUTYPE=MIPS Set _TGTOS=CE Set _TGTPLAT=puvplat Set _TGTPROJ=puvprog Set _WINCECALLED=1 Set _WINCEDRIVE=C: Set _WINCEEXTERNAL=1 Set _WINCEOSVER=300 Set MYPATH=%PATH% SET PATH=%PATH%;c:\WINCE300Img\rev_r5_6\release\bin\i386\; This solution already work for the wince212 version of our project, the batch file was greatly inspired from there (maybe this is the problem...) If someone has any clue, I would apreciate it! Thanks, Jean-François Thibeault Tag: Where are my drivers Tag: 38824
  - 11
    - How PDA Defence works? Hi, I downloaded win ce 3.0 PDA Defence evalution software and installed in my device. I would like to know the implementation logic of safe folder bcoz i tried to look into the registry setting any FSD is assosiated to the safe folder, but couldn't find any such entry. I would be glad if someone tell me how the PDA Defence safe folder been implemented. rgds GP. Tag: Where are my drivers Tag: 38807
  - 12
    - can i surf the internet using wince through USB port HIHI can i surf the internet using wince through USB port can anyone tell me the details? thx a lot Roy Tag: Where are my drivers Tag: 38806
  - 13
    - Multicast problem (high Packet loss) I am using windows CE 4.2. I am testing Streaming Media using Windows Media Player which is Multicasted from a media server. I am testing on 2 types of X86 targets, one was build by our hardware engineer (lets say embedded bord)and other was VIA make. Both had exactly same components. When i am testing (playing) a multicast media on embedded board there is a packet loss of 20% with in the same network. But when i am testing on VIA board which is also on the same network these is a packet loss of 70%.( a bit surprising). In the case of TCP (unicast) both are working fine. I know it is not good to ask you all, What is the exact problem. But i need all of your suggesions in regard, where can be the problem. IS it the software problem? OS is same, all the drivers are same and of the same version. The only difference is on the target board i am using VIA CEPC and on the VIA board i am using MS CEPC. IS it the hardware problem? Both have the same Ethernet and more over in the case of Unicast (TCP) they r working fine. Is it the problem related to buffers? is there any way to increase the datagram buffers in CE 4.2. If i am developing my own application to play the media i can increase using some APIs. But i need a genaric one. Can all of you please give ur sugg. in regarding this problem. Tag: Where are my drivers Tag: 38803
  - 14
    - Future of Data Access on Windows CE? Hi all, I have been reviewing articles on this newsgroup with regard to the use of ADOCE and CE.NET platform. The result of this review is that Microsoft recommends that for future development that ADO.NET be used for data access. I find this position problematic for headless devices. Currently, we use ADOCE to access an OLEDB driver for a third party from ASP pages on a headless device. Microsoft's stand is that we should move to ADO.NET. There are two problems with this for our targeted system. 1) ADO.NET requires the .NET Compact Framework and this is only available on devices with display. 2) The addition of the .NET Compact Framework to the OS takes valuable resources when it is really not needed for anything else. I understand that Microsoft have a strategy for rolling out .NET Framework and incorporating Windows CE into this framework, but I think that they may have dropped the ball on this one. When embedded devices are being developed there are many tradeoffs made between cost and functionality - this is true whether the device has a display or not. But being forced to add the .NET Compact Framework because we wish to have database access from the Web Server (for example), seems a bit heavy handed IMHO. It also (currently) mandates a device with a display. I think that some thought needs to be put into the realm of headless devices and the functionality that they require. What do others think? Maybe we can get Microsoft to re-assess this situation for the future. Regards, Brian Tag: Where are my drivers Tag: 38801
  - 15
    - migrate from 3.0 to 4.2 Now that I have finished work on wince 3.00 and is working on our platform and is stable :0)....We are moving to wince.net 4.2. Our BSP is based on the intel_sa1110_assabet. From what I have read The Intel SA1100/SA1111 (Assabet) Development Kit is no longer available for purchase. Therefore, the BSP for this hardware platform is not included in Platform Builder 4.2 and is no longer supported. If your development platform requires the Intel SA1100/SA1111 (Assabet) Development Kit and the platform directory for testing or other purposes, you can use the BSP for the Intel XScale DBPXA250 Development Platform, which has been enabled to support ARMV4 builds, or you can use another suitable BSP from a third-party vendor. However, Platform Builder 4.2 still supports the Intel SA1100/SA1111 (Assabet) Development Kit CSP drivers for the integrated peripherals on the SA1100 CPU or the SA1111 CPU companion chip. Refer to %_WINCEROOT%\Public\Common\Oak\CSP for these drivers. I'm confused, as far as I understand from the above once I have installed wince 4.2 (I am doing this tomorrow) I can install the ARMV4I option (I'm not installing ARMv4) I can build code for the SA1110 StrongArm. Can I copy the Intel_sa1110_assabet BSP from wince 3.00 and build an image to run on the assabet, it would be useful and would provide immediate feedback. Or will I have to take the Intel Xscale DBPXA250 and integrate/cobble in our drivers, oal, bootloader etc.. I don'y have a feel for how much work is involved, is it weeks or months.... Any advice would be appreciated Regards Tariq Tag: Where are my drivers Tag: 38799
  - 16
    - SIP disable Hi, On our platform, the user will typically have a keyboard. Usually, this keyboard is a full ASCII and numeric unit, so there's no need for a SIP. However, there are situations where a user might have only a numeric keyboard and want the SIP for rare alpha input (an operator's name, maybe, entered once per day). So, I don't want the SIP popping up, by default, any time an EDIT field is selected, but I don't want to completely remove SIP support. My initial strategy for this was to implement my own SIP, which would be the default. This default SIP would do nothing (no window popup, no resizing of dialogs, etc.) When this SIP was selected, then, it would be very much like having no SIP at all in the system (design goal #1 met). However, the user (or the user's application), could change the active SIP, if it wanted SIP input, and could then easily pop the SIP up or down at the right times (design goal #2 met). However, it turns out that none of the logical ways I tried to implement this SIP will cause this to happen. I've tried having the SIP return E_FAIL from its Select() method. This causes the SIP not to have a UI, but also seems to disable the other SIPs from doing anything. I've tried returning error codes from other methods, also. I've tried having the Showing() method call various of the APIs available to the SIP, asking that it be closed, but this doesn't work correctly (the frame window around the SIP is still displayed, although it has no client content). I've also done this for the Select() and other methods. Since I don't have source for the SOFTKB component, I'm out of ideas as to how to achieve my goals. Does anyone know of a DeviceIoControl() for the SOFTKB driver, other API function, a registry entry, or insider's trick that will allow me to either prevent the SIP from appearing, or cause it to immediately pop back down without disabling SIP input completely? Paul T. Tag: Where are my drivers Tag: 38793
  - 17
    - File system root on hard disk I have a cepc nk.bin built with the RAM and ROM file system and hive based registry storage on the Hard Disk that works great. I now want the root of the object store to be mounted to the hard disk so programs, shortcuts, etc. will be preserved though reboots. To do this I replaced the RAM/ROM file system with the ROM only file system from the catalog. I also changed the mountflags for HDProfile\FATFS to the following: [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\HDProfi le\FATFS] "EnableCacheWarm"=dword:0 "MountFlags"=dword:E I created the windows directory on my hard disk and copied all of the items from the release directory that appeared in the FILES section of my ce.bib. This boots successfully and runs with the following issues: The control panel is empty. File explorer is missing icons for some of its buttons. The start menu is empty past the first tier. Is there a section of files that I am failing to copy over, or a step that I am missing? Many of the shortcuts that are missing appear in initobj.dat is there something that needs to be done to that file? Is this the best way to go about this issue? I like the neatness of copying one file to upgrade the system instead of all the files listed in the files section like the RAM build, however cold boot retention is a must have. Tag: Where are my drivers Tag: 38777
  - 18
    - how to build a stand alone CEPC? - booted from Hard Disk? I followed the "How to ..." to build a CEPC booted from hard disk. Everything runs OK except the last step - Remove the boot floppy disk from the CEPC, restart the CEPC, and then verify that the OS image boots on the CEPC. The CEPC hanging there - 1 cursor blinks at the top left corner - forever! If I disable KITL and rebuilt after the change. I can find the nk.bin in RelDir\CEPC_X86Release. BUT, after download, no Release directory in CEPC. So I do not know where the nk.bin located and how to copy it to the hard disk? Tag: Where are my drivers Tag: 38770
  - 19
    - Error: failed PB timebomb check Hi, I try to do a rebuild all (and I did also rebuild all with enable deptree) and I got this error: makeimg: Check for F:\WINCE410\MIRANDA\ALTO_B~1 \RelDir\NATIONAL_GEODE_X86Debug\PreRomImage.bat to run. makeimg: run command: romimage F:\WINCE410\MIRANDA\ALTO_B~1 \RelDir\NATIONAL_GEODE_X86Debug\ce.bib Error: failed PB timebomb check makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec). makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec). Error PB2505: Error executing #(F:\WINCE410\MIRANDA\ALTO_B~1 \RelDir\NATIONAL_GEODE_X86Debug\)makeimg.exe. The platform builder I have is not an evaluation copy. I have a full license.... Any ideas why do I get PB timebomb check? Thanks!! Tag: Where are my drivers Tag: 38764
  - 20
    - NIC lost after reboot. I have implemented a hard reboot function like this in a aplication SetCleanRebootFlag(); KernelIoControl(IOCTL_HAL_REBOOT, NULL, 0, NULL, 0, NULL); This seems to reboot the CEPC fine, exept that the two network cards are not initialised. If I reboot by switching off and on everyting is ok. I use the CEPC with hive based registy on a x86 with IDE hard drive. The NIC uses the RTL8139 driver. Tag: Where are my drivers Tag: 38756
  - 21
    - Urgent - RDP protocol error in CE 4.1 Dear Greats, Already i posted one mail regarding the same below problem. We are using Windows CE Platform builder 4.1 with RDP builded. We are having ThinClient configuration. We leave the RDP connection for more than 9 minutes. Then the RDP session disconnects saying the Session is disconnected due to some protocol error. We have checked that any server side configuration is wrong. With the same server CE 4.0 client is working with our any problem. If their not inputs from Client side to Server side, session is getting closed. This is a big problem. I think, If their is not inputs (Keyboard / Mouse ) from client to server, that client side socket are some thing is getting closed. Is this a bug. can any one help me. This is very urgent. With regards, avkumar Tag: Where are my drivers Tag: 38748
  - 22
    - EARN$£$600\week downloading free software http://131695.PlugUsIn4Cash.com We know it sounds TOO good to BE true, but it?s REAL! Our International Technology firm will pay you hard cash each time FREE software is downloaded. Best of all you will only have to download ONE piece of software ONE time for FREE and you can be on your way to earning BIG! FIND OUT MORE BY VISITING http://StevenBrown1.PlugUsIn4Cash.com/ Tag: Where are my drivers Tag: 38746
  - 23
    - whether the wince surpport hard disk hi, I am using the pxa255 to develop my platform.Because I want to use the hard disk or CD-Rom as the input peripheral equipment, I am going to add a IDE controller to my hard platform, but I am wondering if the wince4.1 support the file format of hard disk or CD-Rom? If wince4.1 supports the function, how should I write the IDE controller driver,I mean what is the interface of the IDE driver MDD layer and PDD layer ,and if the file system of wince4.1 should be modify to adapt my requirment? Where can I find the driver example of wince4.1? thanks in advance an very much Tag: Where are my drivers Tag: 38741
  - 24
    - driver for data acqusition board on PCI bus works in debug kernel, but not in retail kernel Hi, I have successfully wrote and built a stream interface driver that interface with my data acq. board on the PCI of a CEPC. I have been doing all the work in debug version (the driver (dll) and the test program, and the OS). I was able to get everything working. Then I rebuilt the driver in retail mode. And I also built the release version of the kernel. Then when I run my test program, which subsequently tries to open my device using: CreateFile(TEXT("DAC1:"), GENERIC_READ|GENERIC_WRITE, 0, NULL, OPEN_EXISTING, 0, NULL); It failed. It gives me error code 55. I have attached the system monitor tool from eMVC, and I can see that DAC1 is one of the device on the system. I also put in debug messages in the DAC_Init() of my dll, and I can see that it gets called properly, and does all the IO and memory mapping properly. However, it seems like the problem is with CreateFile(), and somehow it thinks that the device does not exist on the system. Any help would be appreciated. Oh, btw, I'm relying on the PCIbus driver to load my board. It worked perfectly in the debug version. Just when I switch to retail version, it fails. Joseph Tag: Where are my drivers Tag: 38734
  - 25
    - CEPC on Secondary IDE Good day, The motherboard I have has a 40pin IDE interface for primary IDE Channel. I have a 44 pin IDE interface on the secondary IDE Channel. How do I configure the CE.Net image to recognize the secondary IDE as a Harddisk inorder for the user to store persistent data? Please advice Thanks Brandon Tag: Where are my drivers Tag: 38725
- Next
  - 1
    - Problem mapping physical address (0xC0000000) on Arm Integrator hi, I posted this message before (through google) but it's seem like it's appears only on google I can't see it using my newsreader so I repost it again here it's go : I have a device with memory registers in physical address 0xc0000000, for which I am porting a driver from Linux to CE 4.2 using PB. The device is connected to the logic module stack on an Arm Integrator board running ARM920T CPU. I have tried mapping this memory into virtual address using the following: .... addr = 0xc0000000; PHYSICAL_ADDRESS mapped, port = {addr, 0}; ULONG inIoSpace = 0; PUCHAR ioPortBase; if (!TransBusAddrToVirtual(Internal, 0, port, size, &inIoSpace, &mapped)) printf("Error translating I/O Ports.\r\n"); ... Debugging into TransBusAddrToVirtual showed that the debugger was disconnected inside the call for VitualCopy (in MmMapIoSpace). The Linux driver maps (by ioremap) and uses this address successfully. Does anyone know what could be causing this problem? I tried also to statically map this address by modifying OEMAddressTable (after finding out that CreateStaticMapping function isn't implemented on Arm), but couldn't access VA_TEST. ... VA_TEST EQU 0xa5000000 ;first availble after VA_SC_BASE EXPORT OEMAddressTable[DATA] OEMAddressTable ... DCD VA_TEST, 0xc0000000, 1 ... ; ; End of Table (MUST BE ZERO!) ; DCD 0, 0, 0 AFAIK, there is no need for static mapping, using TransBusAddrToVirtual should do the job for any user-mode driver. Any help will be appreciated, Ilya. Tag: Where are my drivers Tag: 38713
  - 2
    - Unexpected GPEBltparms I'll throw this out to see if anyone has comments. The two arrows use for forwards and backwards in the windows explorer generate 1bpp-source blts on my 16-bpp video driver. What tripped me up was that they generate a rop4 of 0xb8b8 which is PSDPxax but the brush pointer is NULL. I was thinking that checking the brush pointer for NULL would limit me to the rop4 codes that don't involve a brush, but evidently not. What is the assumed brush if one is not given as part of the GPEBltParms structure ? Tag: Where are my drivers Tag: 38705
  - 3
    - SOURCES Linker HI I have built a dll using the platform builder wizard (pbp file). Project-Settings then select the Link Tab, and in the box labeled Project Options I have the following commctrl.lib coredll.lib bcrapi.lib /nologo /base:"0x00100000" /stack:0x10000,0x1000 /entry:"_DllMainCRTStartup" /dll /incremental:no /pdb:"sa1100rel/BCRhandler.pdb" /debug /nodefaultlib:"$(CENoDefaultLib)" /out:"sa1100rel/BCRhandler.dll" /implib:"sa1100rel/BCRhandler.lib" /subsystem:$(CESubsystem) /align:"4096" /MACHINE:ARM /SECTION:shared,rws I can now build the same dll using Sources file. I can't figure out how to add /SECTION:shared,rws to my sources files, this is absoulutly necessary if the code is to work. I have tried adding the following to the sources but it doesn't have the desired affect CDEFINES= $(CDEFINES) /DBCRHANDLER_EXPORTS SECTION:shared,rws or CDEFINES= $(CDEFINES) /DBCRHANDLER_EXPORTS /DSECTION:shared,rws Regards Tariq Tag: Where are my drivers Tag: 38679
  - 4
    - SOURCES HI I have built a dll using the platform builder wizard (pbp file). Project-Settings then select the Link Tab, and in the box labeled Project Options I have the following commctrl.lib coredll.lib bcrapi.lib /nologo /base:"0x00100000" /stack:0x10000,0x1000 /entry:"_DllMainCRTStartup" /dll /incremental:no /pdb:"sa1100rel/BCRhandler.pdb" /debug /nodefaultlib:"$(CENoDefaultLib)" /out:"sa1100rel/BCRhandler.dll" /implib:"sa1100rel/BCRhandler.lib" /subsystem:$(CESubsystem) /align:"4096" /MACHINE:ARM /SECTION:shared,rws I can now build the same dll using Sources file. I can't figure out how to add /SECTION:shared,rws to my sources files, this is absoulutly necessary if the code is to work. I have tried adding the following to the sources but it doesn't have the desired affect CDEFINES= $(CDEFINES) /DBCRHANDLER_EXPORTS SECTION:shared,rws or CDEFINES= $(CDEFINES) /DBCRHANDLER_EXPORTS /DSECTION:shared,rws Regards Tariq Tag: Where are my drivers Tag: 38675
  - 5
    - DLL build problem hi all, I'm trying to make a DLL having a couple of methods and returning an integer value to my caller application. It should work in my Win CE.NET 4.2 device under ASP web pages. I haven't been able to make this work. Thus need help. First I used eVC++ 4.0 to create the DLL and downloaded it to my device, after which the LAN drivers mystically disappeared from my device and I was not able to test the ASP site. Additionally, the device hung after a few seconds. I also tried to reconstrct the DLL project in Platform Builder 4.2 by inserting a new empty DLL project and recreating the same files that I used in my eVC++ project. This however gave and error message like ... oleidl.idl Error PB2505: Error executing midl.exe. and I have no idea of how to fix this. It must have something to do with the .idl file, but dunno what. Please help me with one of my problems. Mike Tag: Where are my drivers Tag: 38665
  - 6
    - SOURCES Hi I am building a retail build, but it would be useful if I could modify the SOURCES file for one of the components to force it to build a debug version of itself. Is there any way I can do this. I have tried using the following CDEFINES= $(CDEFINES) -D_DEBUG in the sources file but it still builds a retail version of the dll. Any advice would be appreciated Regards Tariq Tag: Where are my drivers Tag: 38660
  - 7
    - SYSGEN_STOREMGR disappearing from environment This problem happens with both CE 4.1 and CE 4.2 We have a platform (based on Residential Gateway) that includes the Storage Manager component. When the project is first created it builds fine. At some point after the projects builds a few times the build will break being unable to find FSDMGR.LIB. This FSDMGR.LIB component requires the SYSGEN_STOREMGR environment variable to be defined. When I open a build command prompt and do a SET SYSGEN_ the STOREMGR is no long part of the defined environment. Yet, if I look at the project window the Storage Manager is listed as being included in the project. Sometimes I can just delete the Storage Manager from the project and drag it back over from the catalog, this fixes the problem for a while. Other times, it says the Storage Manager is in use and won't let me delete it. In either case if I try to define SYSGEN_STOREMGR in the Settings.../Environment dialog it says that the environment variable already set and won't let me set it. Something is clearly broken and is costing us huge in down time for our developers. Any ideas what might be happening here? Mark Moeller Tag: Where are my drivers Tag: 38655
  - 8
    - Is there any usabel WTL port for Windows CE .NET 4.x? Hi! I am trying to build my application with WTL. But I cannot find any stable WTL port for Windows CE .NET. Is there one in the world? Tag: Where are my drivers Tag: 38651
  - 9
    - Problem mapping physical address (0xC0000000) on Arm Integrator hi, I have a device with memory registers in physical address 0xc0000000, for which I am porting a driver from linux to CE 4.2 using PB. The device is connected to the logic module stack on an Arm Integrator board running ARM920T CPU. I have tried mapping this memory into virtual address using the following: .... addr = 0xc0000000; PHYSICAL_ADDRESS mapped, port = {addr, 0}; ULONG inIoSpace = 0; PUCHAR ioPortBase; if (!TransBusAddrToVirtual(Internal, 0, port, size, &inIoSpace, &mapped)) printf("Error translating I/O Ports.\r\n"); ... Debugging into TransBusAddrToVirtual showed that the debugger was disconnected inside the call for VitualCopy (in MmMapIoSpace). The linux driver maps (by ioremap) and uses this address successfully. Does anyone know what could be causing this problem? I tried also to statically map this address by modifying OEMAddressTable (after finding out that CreateStaticMapping function isn't implemented on Arm), but couldn't access VA_TEST. ... VA_TEST EQU 0xa5000000 ;first availble after VA_SC_BASE EXPORT OEMAddressTable[DATA] OEMAddressTable ... DCD VA_TEST, 0xc0000000, 1 ... ; ; End of Table (MUST BE ZERO!) ; DCD 0, 0, 0 AFAIK, there is no need for static mapping, using TransBusAddrToVirtual should do the job for any user-mode driver. Any help will be appreciated, Ilya. Tag: Where are my drivers Tag: 38648
  - 10
    - DirectX in EVC++ Is it possible to do DirectX programming in EVC++ 4 with it's Standard SDK 410?, if it's possibe, why the library file (d3d8.lib) doesn't come with the Standard SDK 410? Tag: Where are my drivers Tag: 38641
  - 11
    - How to generate CAB files that are sub-processor specific? Hi I am developing app for CE .NET 4.1 devices. How can I generate CAB files that are sub-processor specific, like I need different cab file for different sub-processors w/ a Processor family like ARM (ARMV4, ARMV4I, ARMV4T). The cab files seem to distinguish only between major processor family i.e it has only one identifier for the whole Xscale/SA. But the targets are different for different sub-processors within this family. In CE 3.0 I used to have only SA1100 BSP for devices both SA/Xscale (ipaq, toshiba e740 etc). Does that mean for CE.NET I should have a separate installer for each sub-processor. I think I missed something? Plkease provide any hints.. thanks... Tag: Where are my drivers Tag: 38638
  - 12
    - CE.NET 4.1 device - which SDK to use? I need to develop a control app for my CF card on CE .NET 4.1 devices (Fujitsu iPAD). I installed eVC++ 4.0 w/ SP2 and PPC2003 SDK. But when I start eVC++ it says "no CE Platform SDK installed". what else should I install? Can I use PPC2003 w/ evC++ 4.0? For CE 3.0 app development I could do that by having evC++ 3.0 and PPC2003 SDK. Why is it different for CE .NET 4.1? Please let me know. --thanks Tag: Where are my drivers Tag: 38636
  - 13
    - CEC Editing question Hello, I understand that defining custom directory structures is handled via the .DAT file. Is it possible to specify this in a .CEC? I.e. myfile.exe should be "installed" to /Windows/MyDirectory? It seems as though most of the cec build commands are only concerned with where the files are stored during the build, not the end directory structure to install them to. Thank you, - Paul Tag: Where are my drivers Tag: 38628
  - 14
    - Field test/Beta testing - replacing device driver dll What is the suggested procedure for updating a built in device driver on a target device assuming the device is not portable and far away? Of course, I am talking about replacing a single DLL, not redownloading whole operating system image with a driver. One idea which comes to my mind is to make device driver loadable by the test application with RegisterDevice, but how is it done in real life if we are talking about non-portable Windows CE devices? Is there a way to gracefully shut down the driver and instruct DM to load/initialize one section of \Drivers\BuiltIn again? Tag: Where are my drivers Tag: 38623
  - 15
    - Bug in CE4.2::WaveAPI.dll? Hi all, in migrating our platform from CE3.0 -> CE4.1 -> CE4.2 I have found something very strange, I think it is in waveapi.dll When we moved to CE4.2 we noticed that all sounds were being played at full volume. The volume app in control panel would let you move the slider, but as soon as a noise was played, the slider would return to full & the sound played at full volume. After some debugging we found that the sndPlaySound call that the volume app makes was working its way into waveapi.dll. Waveapi.dll was then setting the volume to full (traced by breaking at volume set in our wavePDD driver). As a hack to confirm my suspicions I copied waveapi.dll from our WINCE410 branch & made a new image - the volume bug went away. We are still using the old (CE3) audio driver model, and would like to keep using it. Does anybody else have this problem? Our hardware is based off the Assabet reference platform, we use the UCB1300 for audio output. Cheers Brad Tag: Where are my drivers Tag: 38621
  - 16
    - PCMCIA reader driver problem I have a ActionTec PC750 PC (PCI)Card reader which is compatible with Windows CE - it is on the hardware compatible list. I try to build a CEPC platform and add a feature PCMCIA(TI1250). Build run OK - no error and warnning. But when I try to download to target. It gives error and target hanging. The error show: "Loaded symbols for 'C:\WINCE420 \PUBLIC\MYCEPCPLATFORM\RELDIR\CEPC_X86DEBUG\TI1250ISR.DLL' 4294772011 PID:63fca8fa TID:63fefd82 0x83fca3d0: PCMCIA:Unable to initialize STSCHG int 16 (error 87)" If I use PCMCIA(i82365-compatible) feature. I can build and download to CEPC. But when I plug-in my PC card into the slot. Nothing happened. The PCMCIA reader using the TI chipset. Tag: Where are my drivers Tag: 38613
  - 17
    - beginner question: Build options when I need use build? rebuild? clean? make image?batch build? give the best case to use each option. Thanks, Tag: Where are my drivers Tag: 38610
  - 18
    - what the cross mean on the feature icon? what the cross mean on the feature icon? Tag: Where are my drivers Tag: 38606
  - 19
    - PB 4.2: NDIS startup problems During bootup, with a radio-based network card in the PCMCIA slot, the NDIS driver for this card fails to load. I have verified that the key shown in the ActivateDeviceEx line is definitely in the registry. I'm quite certain of this, since the driver loads and runs fine if I insert or reinsert the card after the boot sequence has completed. This seems to imply some problem with the NDIS startup sequence. Here is what I see in the Platform Builder debug window when this fails during bootup: DEVICE!ActivateDeviceEx(Drivers\PCMCIA\Lucent_Technologies-WaveLAN/IEEE-C908) entered PNP interface class {f8a6ba98-087a-43ac-a9d8-b7f13c5bae31} (NDS1:) ATTACH NDIS:ndisAddPCCardDevice INdisOpenDeviceKey failed NDIS: ERROR - NdisPCIBusDeviceInit no BusNumber for Comm\PCI\NDIS\Parms DEVICE!StartOneDriver RegisterDevice(NDS, 0, NDIS.Dll, 0x802ee6c) failed I'm guessing that it is default behavior in NDIS, that when if fails to open the registry key passed in, that it falls back to trying to see if the device might be on the PCI bus. In my case, there is no PCI bus or PCI dlls in my platform, or any Comm\PCI key in my reginit.ini. I do, however, end up with the following Comm\PCI entry in my registry after this bootup failure: [HKEY_LOCAL_MACHINE\Comm\PCI\NDIS\Parms] "BusType"=dword:00000005 "IClass"="{A32942B7-920C-486b-B0E6-92A702A99B35}" "Order"=dword:00000001 "Index"=dword:00000000 "Prefix"="NDS" "Dll"="NDIS.Dll" Another confusing bit of info is the fact that the \Drivers\Active entry does show an entry for the card, but does not have a drivers\active\04 entry for NDS0:, which I see when I boot up without the card installed. [HKEY_LOCAL_MACHINE\Drivers\Active\03] "Hnd"=dword:000305a0 "Name"="COM1:" "Key"="Drivers\\BuiltIn\\Serial" "InterfaceType"=dword:ffffffff [HKEY_LOCAL_MACHINE\Drivers\Active\05] "Hnd"=dword:00031c90 "Name"="NDS1:" "Key"="Drivers\\PCMCIA\\Lucent_Technologies-WaveLAN/IEEE-C908" "Sckt"=dword:00860000 "PnpId"="Lucent_Technologies-WaveLAN/IEEE-C908" "RegenumParms"=hex(7):\ 53,63,6b,74,00,50,6e,70,49,64,00,52,65,67,65,6e,75,6d,50,61,72,6d,73,00,00,\ 00,00,00,00,00,00 "InterfaceType"=dword:00000008 I have scoured the help files to little avail. One other bit of information to note is that if the card has a \Drivers\PCMCIA\detect entry in the registry, then it will successfully load and run on bootup, but if I have to rely on a PNP id, then that same card will fail like all the others. Has anyone else seen this kind of problem where a PCMCIA network device fails on startup, but works fine on a card insert? Can anyone suggest a next step to try to get these drivers (it happens on multiple vendor's radio cards) working properly without a card insert? Arthur McNair Vocollect, Inc. Pittsburgh, PA Tag: Where are my drivers Tag: 38599
  - 20
    - Do's any one now how to Add LIB to EXPLORER build Sary, probably dome question. We have extension we are adding to explorer code and its building it, but its not including it as lib when it builds the EXPLORER code and the linker is telling me it knows nothing about my class. What have I missed in configuration?. Do's anyone have any ideas? Tag: Where are my drivers Tag: 38588
  - 21
    - shadow in \windows Hi, I want to create a File System Block Driver that can give a stream interface to the FAT file system driver. Can someone give some info on how to do this? Thanks in advance. BV Tag: Where are my drivers Tag: 38577
  - 22
    - unable to delete feature? I added a feature PCMCIA(i82365-compatible) and want to delete it now. But I can not delete it. I found there is down arrow on the icon. What that mean? Howcan I delete the feature? I can delete other feature though. Tag: Where are my drivers Tag: 38567
  - 23
    - WCE Dynamic-link Library hello, I developed a simple DLL library, first in eVC++ 4, but was not able to download & register it to Win CE.NET 4.2 device. I wrote the "same" DLL in PB 4.2 (WCE Dynamic-link library) and was able to include that in my image file (nk.bin). But it was not registered. How can I find out what information I should write to registry and where to do it? Detailed How-to would be appreciated. Thanks Mike Tag: Where are my drivers Tag: 38563
  - 24
    - delete the platform? I built my platform for learning. Now I want to delete it. Just delete myplatform directory? what else I need to do for clean deletion. Tag: Where are my drivers Tag: 38560
  - 25
    - Corrupt database Hi everybody, Since I migrated to 4.20, I encountered "corrupt database" problems while building my platforms. In Platform Builder, this shows red lines like: BUILD: g:\wince420\platform\nce\build.dat(120): corrupt database (File error) Can anybody tell me how to fix it? Thanks in advance. Rémi Tag: Where are my drivers Tag: 38553

I'm building a BSP. BP-4.2.

I've been using the BSP Wizard and things are going ok. I save my work and
now when I come back I see only a portion of the drivers that I've entered.
In particular I have an audio driver and dma driver shown. I see only these
2 drivers in the CATALOG window of PB and when I use the BSP Wizard and
select that I want to add drivers to a BSP it shows me only those same 2
drivers.

YET, in the CEC file that I've created with the Wizard ( and have not
fiddled around with it by hand) I have many more driver entries.

What's going on ?

Finecats

Top

Re: Where are my drivers by Suhan

Suhan
Tue Jul 29 20:14:26 CDT 2003

I've had this same problem. I'm not sure if it's a bug or not, but in my
case, I cloned the BSP and renamed it and then the entries appeared in the
catalog...-_-a

Oh well... Hope somebody knows the solution..

PCE..

"Marley Lucy" <2finecats@sbcglobal.net> wrote in message
news:ee$ikUiVDHA.208@tk2msftngp13.phx.gbl...
> I'm building a BSP. BP-4.2.
>
> I've been using the BSP Wizard and things are going ok. I save my work
and
> now when I come back I see only a portion of the drivers that I've
entered.
> In particular I have an audio driver and dma driver shown. I see only
these
> 2 drivers in the CATALOG window of PB and when I use the BSP Wizard and
> select that I want to add drivers to a BSP it shows me only those same 2
> drivers.
>
> YET, in the CEC file that I've created with the Wizard ( and have not
> fiddled around with it by hand) I have many more driver entries.
>
> What's going on ?
>
> Finecats
>
>

Top