[Q]: WMADMOD

Tutorials Win: Microsoft Windows Forum

- Previous
 - 1
 - [Q]: SW mixer Hi all, does anyone know what does debug message below say ? CSwMixer::MixerLoop - runaway preroll loop regards Ryan Tag: [Q]: WMADMOD Tag: 59835
 - 2
 - Another newbie question I would like to write a diagnostic tool to test DMA transfer from a memory mapped device. All I want to do is , 1. set up DMA transfer by setting some registers related to DMA. 2. Then write an ISR to detect the DMA operation completion (DMA completion is informed through interrutp in the processor I am using i,e. SH4). and 3. display the data in a window. Can I do all this from an application. In particular can I install ISR, IST from a exe? Any help is greatly appreciated. thanks in advance -Hemant a newbie in WinCE Tag: [Q]: WMADMOD Tag: 59822
 - 3
 - ASP on CE 4.2 ?'s Our company is thinking about developing an ASP web server on our embedded device. The first release of our embedded device included a simplistic ISAPI extension DLL written in C++. We have received some very positive initial feedback from customers, sales, and service reps. So we figured we would take the next step to support ASP. I have a few questions though -) Is this a good choice? Memory and speed is not an issue on our platform. -) What is the development env to use? Visual InterDev? If Visual InterDev, so how do you hook it in? -) Which script env is better supported (VBScript or JScript)? I have seen some reports with bugs in the JScript interpreter? -) Are there better tools in CE 5.0? We are currently using CE 4.2 -) Are there any COM issues? I come from the PC world and have had to deal with a lot of headaches with COM apartments, issues with WaitForMultipleObjects and MsgWaitForxxx, Marshalling, etc.. I realize that CE has simplified some of this. However, there are always hidden issues that you never find out until your are deep into coding and testing. -) Can we use .NET CompactFramework instead of ASP some how? I realize ASP.NET is not supported. -) Should we simply stay with ISAPI instead? Thanks Tag: [Q]: WMADMOD Tag: 59814
 - 4
 - WINCE 5.0 Installation Hi, I have downloaded WINCE 5.0 12o days evaluation version. I am trying to install the same, but during installation i am getting the following error message: ======================================= Error 1606. Could not access network location http://download.microsoft.com/download/0/8/0/08000 f6b-974b-4384-90d0-26440d9ecbcf/Data1.cab ======================================= Please help me to solve this problem. Regards Hussain Tag: [Q]: WMADMOD Tag: 59804
 - 5
 - Log file for same 4 PB error in cepc SYSGEN_AYGSHELL=1 SYSGEN_BATTERY=1 SYSGEN_BTH=1 SYSGEN_BTH_HEADSET_AG=1 SYSGEN_CERTS=1 SYSGEN_CONNMC=1 SYSGEN_CORELOC=1 SYSGEN_CPP_SEH=1 SYSGEN_CRYPTO=1 SYSGEN_CURSOR=1 SYSGEN_EAP=1 SYSGEN_ETHERNET=1 SYSGEN_ETH_80211=1 SYSGEN_ETH_CISCO=1 SYSGEN_FONTS_COUR_1_30=1 SYSGEN_FONTS_TAHOMA_1_07=1 SYSGEN_FSRAMROM=1 SYSGEN_FSREGRAM=1 SYSGEN_FSREPLBIT=1 SYSGEN_HELP=1 SYSGEN_IE_JSCRIPT=1 SYSGEN_INETCPL=1 SYSGEN_IRDA=1 SYSGEN_JSCRIPT=1 SYSGEN_MENU_OVERLAP=1 SYSGEN_MLANG=1 SYSGEN_MODEM=1 SYSGEN_MSIM=1 SYSGEN_OBEX_CLIENT=1 SYSGEN_OBEX_INBOX=1 SYSGEN_OBEX_SERVER=1 SYSGEN_PIE=1 SYSGEN_PM=1 SYSGEN_PPP=1 SYSGEN_PPTP=1 SYSGEN_QVGAP=1 SYSGEN_REDIR=1 SYSGEN_RTTI=1 SYSGEN_SERVICES=1 SYSGEN_SHDOCVW=1 SYSGEN_SHELL=1 SYSGEN_SOFTKB=1 SYSGEN_STANDARDSHELL=1 SYSGEN_STDIO=1 SYSGEN_STDIOA=1 SYSGEN_STOREMGR=1 SYSGEN_TAPI=1 SYSGEN_TCPIP6=1 SYSGEN_TOOLHELP=1 SYSGEN_TOUCH=1 SYSGEN_URLMON=1 SYSGEN_WCELOAD=1 SYSGEN_WEBVIEW=1 SYSGEN_WININET=1 . . CE_MODULES= nk filesys device pm coredll commdlg commctrl fonts rt_tests gwes cxport winsock ws2 ws2instl wspm nspm afd netui ndis tcpstk iphlpapi keybd pointer nled shell relfsd loaddbg ceddk display giisr 8042keyboard nopkeyboard mmtimer pci pcmci a pcmconv regenum serial csp battdrvr zlib toolhelp tcpip6 ipv6hlp ppp tapi asyncmac unimodem pptp autoras pcx500 irdastk ircomm wzcsvc wzcsapi zclog islp2nds eapol eap eapchap eaptls dhcp ethman rtl8139 smsc100fd dp83815 dc21x4 rndismini net2890 ne 2000 netmui vmini ndisuio termctrl rnaapp connmc ndispwr secur32 ntlmssp spnego schannel ssllsp rsaenh crypt32 msasn1 redir netbios fsdmgr waveapi audiodrv wavesamples enroll btd btdrt btloader btsvc btaudiogw bthuart bthamb bthsc bthcsr bthuniv wen dyser wcestreambt sio950 msim softkb COREDLL_COMPONENTS=coremain lmem thunks fmtmsg accel_c rectapi wmgr_c mgdi_c serdev full_crt devload crypthash rsa32 corestrw corestra shcore shortcut shexec shmisc fileopen fileinfo shellapis battery crt_rtti crt_cpp_seh coreloc messagedialogboxthu nk tapilib cryptapi mmwave mmsnd mmmix coresiow coresioa coresip coreimm FILESYS_COMPONENTS=fsheap fsmain fspass fsdbase msgqueue fsreg fsysram fsreplbit FATUTIL_COMPONENTS= DEVICE_COMPONENTS= devmain pmif PM_COMPONENTS= pm_mdd pm_battery pm_default_pdd GWE1_COMPONENTS=wmbase gweshare gwesmain immthunk msgque GSetWinLong CePtr foregnd uibase kbdui journal hotkey idle nled msgbeep notify notifpub audio GWE2_COMPONENTS=mgbase mgbitmap mgblt mgblt2 mgdc mgdibsec mgdraw mgrgn mgwinmgr mgpalnat mggradfillstub mgtt mgdrwtxt mgpal mgtci mgalias tchui calibrui mgdx GWE3_COMPONENTS=atom winmgr sbcmn nclient caret clipbd timer accel defwndproc gcache loadbmp loadimg syscolor menu cascade column menuscrl drawmbar mOverlap iconcmn icon MouseCursorOnly iconcurs mcursor mcursor8 mNoTapUI GWE4_COMPONENTS=dlgmgr dlgmnem gwectrl btnctl stcctl edctl msgbox msgbox_hpc dlgmgr_hpc menu_hpc EditControlOs startup oomui oom startui cmbctl cdlctl imgctl lbctl scbctl sbcmnview nclientview gcacheview btnctlview stcctlview cmbctlview lbctlview COMMCTRL_COMPONENTS=toolbar updown status propsheet listview treeview date tab progress trackbar capedit rebar cmdbar dsa tooltips fe COMMCTRL_SKIN=commctrlview IMAGING_COMPONENTS= img_png img_libpng img_pngdecoder img_bmp img_bmpdecoder img_gif img_gifdecoder img_liblzw img_jpeg img_jpegdecoder img_jpegfull img_jpegmem FONTS_COMPONENTS= tahoma_1_07 cour_1_30 DCOM_MODULES= uuid ole32 oleaut32 MSMQ_MODULES= SCRIPT_MODULES= jscript IE_MODULES= uuid inetcpl shdocvw shdoclc urlmon wininet shlwapi mlang uuid imaging SERVERS_MODULES= obexapi obexsrvr obexinbx services RDP_MODULES= CETSC_COMPONENTS= MSTSCAX_COMPONENTS= ATLCONMAN_COMPONENTS= SHELLSDK_MODULES= aygshell AYGSHELL_COMPONENTS= aygshcore aygshhpc aygshno aygqvga SHELL_MODULES= explorer qvgap shcore ceshell SHCORE_COMPONENTS= shcore path WCESHELLFE_MODULES= control ctlpnl cplmain htmlview peghelp browser iexplore webview msscript connpnl bthpnl AdvBacklight intlp stguip CPLMAIN_COMPONENTS= colorscheme comm network datetime keyboard password owner system display pointercmn mouse power remove dialing backlight certs sounds sip WCEAPPSFE_MODULES= PIM_MODULES= DIRECTX_MODULES= QUARTZ0_COMPONENTS= QUARTZ1_COMPONENTS= QUARTZ2_COMPONENTS= DXMASF_COMPONENTS= DDCORE_COMPONENTS= DATASYNC_MODULES= cefobj repllog rapisrv eventrst rra_stm systemcpl udp2tcp wceload unload SPEECH_MODULES= OLE32_COMPONENTS=mcombase mcommem mcomstr mcommon mcomlib ole232 docfile msf exp mcomstm VIEWERS_MODULES= SQLCE_MODULES= CEBUILD: Running sysgen -p dcom preproc Starting sysgen phase for project ( dcom ) CEBUILD: Running sysgen -p netcf preproc Starting sysgen phase for project ( netcf ) CEBUILD: Running sysgen -p ie preproc Starting sysgen phase for project ( ie ) CEBUILD: Running sysgen -p script preproc Starting sysgen phase for project ( script ) CEBUILD: Running sysgen -p servers preproc Starting sysgen phase for project ( servers ) CEBUILD: Running sysgen -p rdp preproc Starting sysgen phase for project ( rdp ) CEBUILD: Running sysgen -p shellsdk preproc Starting sysgen phase for project ( shellsdk ) CEBUILD: Running sysgen -p shell preproc Starting sysgen phase for project ( shell ) CEBUILD: Running sysgen -p wceshellfe preproc Starting sysgen phase for project ( wceshellfe ) CEBUILD: Running sysgen -p wceappsfe preproc Starting sysgen phase for project ( wceappsfe ) CEBUILD: Running sysgen -p viewers preproc Starting sysgen phase for project ( viewers ) CEBUILD: Running sysgen -p directx preproc Starting sysgen phase for project ( directx ) CEBUILD: Running sysgen -p datasync preproc Starting sysgen phase for project ( datasync ) CEBUILD: Running sysgen -p SQLCE preproc Starting sysgen phase for project ( SQLCE ) CEBUILD: Running sysgen -p speech preproc Starting sysgen phase for project ( speech ) CEBUILD: Running sysgen postproc (for COMMON) Starting sysgen phase for project ( common ) . . User selected the following SYSGEN variables SYSGEN_AS_BASE=1 SYSGEN_AS_FILE=1 SYSGEN_AUDIO=1 SYSGEN_AUTH=1 SYSGEN_AUTH_NTLM=1 SYSGEN_AUTH_SCHANNEL=1 SYSGEN_AUTORAS=1 SYSGEN_AYGSHELL=1 SYSGEN_BATTERY=1 SYSGEN_BTH=1 SYSGEN_BTH_HEADSET_AG=1 SYSGEN_CERTS=1 SYSGEN_CONNMC=1 SYSGEN_CORELOC=1 SYSGEN_CPP_SEH=1 SYSGEN_CRYPTO=1 SYSGEN_CURSOR=1 SYSGEN_EAP=1 SYSGEN_ETHERNET=1 SYSGEN_ETH_80211=1 SYSGEN_ETH_CISCO=1 SYSGEN_FONTS_COUR_1_30=1 SYSGEN_FONTS_TAHOMA_1_07=1 SYSGEN_FSRAMROM=1 SYSGEN_FSREGRAM=1 SYSGEN_FSREPLBIT=1 SYSGEN_HELP=1 SYSGEN_IE_JSCRIPT=1 SYSGEN_INETCPL=1 SYSGEN_IRDA=1 SYSGEN_JSCRIPT=1 SYSGEN_MENU_OVERLAP=1 SYSGEN_MLANG=1 SYSGEN_MODEM=1 SYSGEN_MSIM=1 SYSGEN_OBEX_CLIENT=1 SYSGEN_OBEX_INBOX=1 SYSGEN_OBEX_SERVER=1 SYSGEN_PIE=1 SYSGEN_PM=1 SYSGEN_PPP=1 SYSGEN_PPTP=1 SYSGEN_QVGAP=1 SYSGEN_REDIR=1 SYSGEN_RTTI=1 SYSGEN_SERVICES=1 SYSGEN_SHDOCVW=1 SYSGEN_SHELL=1 SYSGEN_SOFTKB=1 SYSGEN_STANDARDSHELL=1 SYSGEN_STDIO=1 SYSGEN_STDIOA=1 SYSGEN_STOREMGR=1 SYSGEN_TAPI=1 SYSGEN_TCPIP6=1 SYSGEN_TOOLHELP=1 SYSGEN_TOUCH=1 SYSGEN_URLMON=1 SYSGEN_WCELOAD=1 SYSGEN_WEBVIEW=1 SYSGEN_WININET=1 . . . . Sysgen of IABASE selecting the following components (after dependency check): SYSGEN_AS_BASE=1 SYSGEN_AS_FILE=1 SYSGEN_AUDIO=1 SYSGEN_AUTH=1 SYSGEN_AUTH_NTLM=1 SYSGEN_AUTH_SCHANNEL=1 SYSGEN_AUTORAS=1 SYSGEN_AYGSHELL=1 SYSGEN_BATTERY=1 SYSGEN_BTH=1 SYSGEN_BTH_HEADSET_AG=1 SYSGEN_CERTS=1 SYSGEN_CONNMC=1 SYSGEN_CORELOC=1 SYSGEN_CPP_SEH=1 SYSGEN_CRYPTO=1 SYSGEN_CURSOR=1 SYSGEN_EAP=1 SYSGEN_ETHERNET=1 SYSGEN_ETH_80211=1 SYSGEN_ETH_CISCO=1 SYSGEN_FONTS_COUR_1_30=1 SYSGEN_FONTS_TAHOMA_1_07=1 SYSGEN_FSRAMROM=1 SYSGEN_FSREGRAM=1 SYSGEN_FSREPLBIT=1 SYSGEN_HELP=1 SYSGEN_IE_JSCRIPT=1 SYSGEN_INETCPL=1 SYSGEN_IRDA=1 SYSGEN_JSCRIPT=1 SYSGEN_MENU_OVERLAP=1 SYSGEN_MLANG=1 SYSGEN_MODEM=1 SYSGEN_MSIM=1 SYSGEN_OBEX_CLIENT=1 SYSGEN_OBEX_INBOX=1 SYSGEN_OBEX_SERVER=1 SYSGEN_PIE=1 SYSGEN_PM=1 SYSGEN_PPP=1 SYSGEN_PPTP=1 SYSGEN_QVGAP=1 SYSGEN_REDIR=1 SYSGEN_RTTI=1 SYSGEN_SERVICES=1 SYSGEN_SHDOCVW=1 SYSGEN_SHELL=1 SYSGEN_SOFTKB=1 SYSGEN_STANDARDSHELL=1 SYSGEN_STDIO=1 SYSGEN_STDIOA=1 SYSGEN_STOREMGR=1 SYSGEN_TAPI=1 SYSGEN_TCPIP6=1 SYSGEN_TOOLHELP=1 SYSGEN_TOUCH=1 SYSGEN_URLMON=1 SYSGEN_WCELOAD=1 SYSGEN_WEBVIEW=1 SYSGEN_WININET=1 . . CE_MODULES= nk filesys device pm coredll commdlg commctrl fonts rt_tests gwes cxport winsock ws2 ws2instl wspm nspm afd netui ndis tcpstk iphlpapi keybd pointer nled shell relfsd loaddbg ceddk display giisr 8042keyboard nopkeyboard mmtimer pci pcmci a pcmconv regenum serial csp battdrvr zlib toolhelp tcpip6 ipv6hlp ppp tapi asyncmac unimodem pptp autoras pcx500 irdastk ircomm wzcsvc wzcsapi zclog islp2nds eapol eap eapchap eaptls dhcp ethman rtl8139 smsc100fd dp83815 dc21x4 rndismini net2890 ne 2000 netmui vmini ndisuio termctrl rnaapp connmc ndispwr secur32 ntlmssp spnego schannel ssllsp rsaenh crypt32 msasn1 redir netbios fsdmgr waveapi audiodrv wavesamples enroll btd btdrt btloader btsvc btaudiogw bthuart bthamb bthsc bthcsr bthuniv wen dyser wcestreambt sio950 msim softkb COREDLL_COMPONENTS=coremain lmem thunks fmtmsg accel_c rectapi wmgr_c mgdi_c serdev full_crt devload crypthash rsa32 corestrw corestra shcore shortcut shexec shmisc fileopen fileinfo shellapis battery crt_rtti crt_cpp_seh coreloc messagedialogboxthu nk tapilib cryptapi mmwave mmsnd mmmix coresiow coresioa coresip coreimm FILESYS_COMPONENTS=fsheap fsmain fspass fsdbase msgqueue fsreg fsysram fsreplbit FATUTIL_COMPONENTS= DEVICE_COMPONENTS= devmain pmif PM_COMPONENTS= pm_mdd pm_battery pm_default_pdd GWE1_COMPONENTS=wmbase gweshare gwesmain immthunk msgque GSetWinLong CePtr foregnd uibase kbdui journal hotkey idle nled msgbeep notify notifpub audio GWE2_COMPONENTS=mgbase mgbitmap mgblt mgblt2 mgdc mgdibsec mgdraw mgrgn mgwinmgr mgpalnat mggradfillstub mgtt mgdrwtxt mgpal mgtci mgalias tchui calibrui mgdx GWE3_COMPONENTS=atom winmgr sbcmn nclient caret clipbd timer accel defwndproc gcache loadbmp loadimg syscolor menu cascade column menuscrl drawmbar mOverlap iconcmn icon MouseCursorOnly iconcurs mcursor mcursor8 mNoTapUI GWE4_COMPONENTS=dlgmgr dlgmnem gwectrl btnctl stcctl edctl msgbox msgbox_hpc dlgmgr_hpc menu_hpc EditControlOs startup oomui oom startui cmbctl cdlctl imgctl lbctl scbctl sbcmnview nclientview gcacheview btnctlview stcctlview cmbctlview lbctlview COMMCTRL_COMPONENTS=toolbar updown status propsheet listview treeview date tab progress trackbar capedit rebar cmdbar dsa tooltips fe COMMCTRL_SKIN=commctrlview IMAGING_COMPONENTS= img_png img_libpng img_pngdecoder img_bmp img_bmpdecoder img_gif img_gifdecoder img_liblzw img_jpeg img_jpegdecoder img_jpegfull img_jpegmem FONTS_COMPONENTS= tahoma_1_07 cour_1_30 DCOM_MODULES= uuid ole32 oleaut32 MSMQ_MODULES= SCRIPT_MODULES= jscript IE_MODULES= uuid inetcpl shdocvw shdoclc urlmon wininet shlwapi mlang uuid imaging SERVERS_MODULES= obexapi obexsrvr obexinbx services RDP_MODULES= CETSC_COMPONENTS= MSTSCAX_COMPONENTS= ATLCONMAN_COMPONENTS= SHELLSDK_MODULES= aygshell AYGSHELL_COMPONENTS= aygshcore aygshhpc aygshno aygqvga SHELL_MODULES= explorer qvgap shcore ceshell SHCORE_COMPONENTS= shcore path WCESHELLFE_MODULES= control ctlpnl cplmain htmlview peghelp browser iexplore webview msscript connpnl bthpnl AdvBacklight intlp stguip CPLMAIN_COMPONENTS= colorscheme comm network datetime keyboard password owner system display pointercmn mouse power remove dialing backlight certs sounds sip WCEAPPSFE_MODULES= PIM_MODULES= DIRECTX_MODULES= QUARTZ0_COMPONENTS= QUARTZ1_COMPONENTS= QUARTZ2_COMPONENTS= DXMASF_COMPONENTS= DDCORE_COMPONENTS= DATASYNC_MODULES= cefobj repllog rapisrv eventrst rra_stm systemcpl udp2tcp wceload unload SPEECH_MODULES= OLE32_COMPONENTS=mcombase mcommem mcomstr mcommon mcomlib ole232 docfile msf exp mcomstm VIEWERS_MODULES= SQLCE_MODULES= CEBUILD: Running sysgen -p dcom postproc Starting sysgen phase for project ( dcom ) CEBUILD: Running sysgen -p netcf postproc Starting sysgen phase for project ( netcf ) CEBUILD: Running sysgen -p ie postproc Starting sysgen phase for project ( ie ) CEBUILD: Running sysgen -p script postproc Starting sysgen phase for project ( script ) CEBUILD: Running sysgen -p servers postproc Starting sysgen phase for project ( servers ) CEBUILD: Running sysgen -p rdp postproc Starting sysgen phase for project ( rdp ) CEBUILD: Running sysgen -p shellsdk postproc Starting sysgen phase for project ( shellsdk ) CEBUILD: Running sysgen -p shell postproc Starting sysgen phase for project ( shell ) CEBUILD: Running sysgen -p wceshellfe postproc Starting sysgen phase for project ( wceshellfe ) CEBUILD: Running sysgen -p wceappsfe postproc Starting sysgen phase for project ( wceappsfe ) CEBUILD: Running sysgen -p viewers postproc Starting sysgen phase for project ( viewers ) CEBUILD: Running sysgen -p directx postproc Starting sysgen phase for project ( directx ) CEBUILD: Running sysgen -p datasync postproc Starting sysgen phase for project ( datasync ) CEBUILD: Running sysgen -p SQLCE postproc Starting sysgen phase for project ( SQLCE ) CEBUILD: Running sysgen -p speech postproc Starting sysgen phase for project ( speech ) Sysgening platform F:\WINCE420\platform\CEPC Could Not Find F:\WINCE420\platform\CEPC\*.bif CEBUILD: Building platform clean due to change of project CEBUILD: Building -c (F:\WINCE420\platform\CEPC) BUILDING with __bldMP= BUILD: Checking for F:\WINCE420\sdk\bin\i386\srccheck.exe. BUILD: SrcCheck exit code: 0 (dec) srcgen F:\WINCE420\PLATFORM\CEPC MOBILECEPC F:\WINCE420\PUBLIC\MOBILE~1\WINCE420\CEPC\cesysgen BUILD: Compile and Link for x86. BUILD: Loading F:\WINCE420\PLATFORM\CEPC\Build.dat... BUILD: Computing Include file dependencies: BUILD: Examining f:\wince420\platform\cepc directory tree for files to compile. f:\wince420\platform\cepc f:\wince420\platform\cepc\gwe f:\wince420\platform\cepc\gwe\nleddrv f:\wince420\platform\cepc\gwe\nleddrv - 1 source files (150 lines) f:\wince420\platform\cepc\gwe\buildexe f:\wince420\platform\cepc\drivers f:\wince420\platform\cepc\drivers\irmac f:\wince420\platform\cepc\drivers\irmac\nscirda f:\wince420\platform\cepc\drivers\irmac\nscirda - 12 source files (7,733 lines) f:\wince420\platform\cepc\eboot f:\wince420\platform\cepc\eboot - 6 source files (2,127 lines) f:\wince420\platform\cepc\sboot f:\wince420\platform\cepc\sboot - 3 source files (878 lines) f:\wince420\platform\cepc\kernel f:\wince420\platform\cepc\kernel\hal f:\wince420\platform\cepc\kernel\hal - 4 source files (2,551 lines) f:\wince420\platform\cepc\kernel\buildexe f:\wince420\platform\cepc\kernel\buildexe\kern f:\wince420\platform\cepc\kernel\buildexe\kern - 1 source files (67 lines) f:\wince420\platform\cepc\kernel\buildexe\kernkitl f:\wince420\platform\cepc\kernel\buildexe\kernkitlprof BUILD: Saving F:\WINCE420\PLATFORM\CEPC\Build.dat... Total of 27 source files (13,506 lines) to compile in 6 directories BUILD: Compiling f:\wince420\platform\cepc\gwe\nleddrv directory Compiling - f:\wince420\platform\cepc\gwe\nleddrv\.\nleddrv.cpp for x86 Files: 27 BUILD: Compiling f:\wince420\platform\cepc\drivers\irmac\nscirda directory Compiling - f:\wince420\platform\cepc\drivers\irmac\nscirda\.\comm.c for x86 Files: 26 Compiling - f:\wince420\platform\cepc\drivers\irmac\nscirda\.\fcs.c for x86 Files: 25 Compiling - f:\wince420\platform\cepc\drivers\irmac\nscirda\.\nsc.c for x86 Files: 24 Compiling - f:\wince420\platform\cepc\drivers\irmac\nscirda\.\request.c for x86 Files: 23 Compiling - f:\wince420\platform\cepc\drivers\irmac\nscirda\.\resource.c for x86 Files: 22 Compiling - f:\wince420\platform\cepc\drivers\irmac\nscirda\.\settings.c for x86 Files: 21 Compiling - f:\wince420\platform\cepc\drivers\irmac\nscirda\.\convert.c for x86 Files: 20 Compiling - f:\wince420\platform\cepc\drivers\irmac\nscirda\.\init.c for x86 Files: 19 Compiling - f:\wince420\platform\cepc\drivers\irmac\nscirda\.\nscfir.c for x86 Files: 18 Compiling - f:\wince420\platform\cepc\drivers\irmac\nscirda\.\sync.c for x86 Files: 17 Compiling - f:\wince420\platform\cepc\drivers\irmac\nscirda\.\dongle.c for x86 Files: 16 Compiling - f:\wince420\platform\cepc\drivers\irmac\nscirda\.\ndismlib.c for x86 Files: 15 BUILD: Compiling f:\wince420\platform\cepc\eboot directory Assembling - f:\wince420\platform\cepc\eboot\.\oeminit.asm for x86 Files: 14 Compiling - f:\wince420\platform\cepc\eboot\.\main.c for x86 Files: 13 Compiling - f:\wince420\platform\cepc\eboot\.\debug.c for x86 Files: 12 Compiling - f:\wince420\platform\cepc\eboot\.\pci.c for x86 Files: 11 Compiling - f:\wince420\platform\cepc\eboot\.\pciconfig.c for x86 Files: 10 Compiling - f:\wince420\platform\cepc\eboot\.\flash.c for x86 Files: 9 BUILD: Compiling f:\wince420\platform\cepc\sboot directory Assembling - f:\wince420\platform\cepc\sboot\.\oeminit.asm for x86 Files: 8 Compiling - f:\wince420\platform\cepc\sboot\.\main.c for x86 Files: 7 Compiling - f:\wince420\platform\cepc\sboot\.\debug.c for x86 Files: 6 BUILD: Compiling f:\wince420\platform\cepc\kernel\hal directory Compiling - f:\wince420\platform\cepc\kernel\hal\.\oemioctl.c for x86 Files: 5 Compiling - f:\wince420\platform\cepc\kernel\hal\.\halether.c for x86 Files: 4 Compiling - f:\wince420\platform\cepc\kernel\hal\.\halkitl.c for x86 Files: 3 Compiling - f:\wince420\platform\cepc\kernel\hal\.\halserkitl.c for x86 Files: 2 BUILD: Compiling f:\wince420\platform\cepc\kernel\buildexe\kern directory Compiling - f:\wince420\platform\cepc\kernel\buildexe\kern\.\kitlstub.c for x86 Files: 1 BUILD: Linking f:\wince420\platform\cepc\gwe\buildexe directory Processing Unknown item(s)... Files: 0 BUILD: Linking f:\wince420\platform\cepc\eboot directory Files: 0 BUILD: Linking f:\wince420\platform\cepc\sboot directory Files: 0 BUILD: Linking f:\wince420\platform\cepc\kernel\buildexe\kern directory Files: 0 BUILD: Linking f:\wince420\platform\cepc\kernel\buildexe\kernkitl directory Files: 0 BUILD: Linking f:\wince420\platform\cepc\kernel\buildexe\kernkitlprof directory Files: 0 BUILD: Linking f:\wince420\platform\cepc\drivers\irmac\nscirda directory Files: 0 BUILD: Done 27 files compiled Build for Windows CE (Release) (Built on Dec 17 2002 13File names: Build.log Build.wrn Build.err Build.dat Build.con Master db name is: F:\WINCE420\PLATFORM\CEPC\Build.dat Master db name is: F:\WINCE420\PLATFORM\CEPC\Build.dat Sysgening platform F:\WINCE420\platform\CEPC Performing Additional Build Actions... Copying platform header files... BUILDREL: Using xcopy command BUILDREL: cleaning up F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2 BUILDREL: Copying SYSGENED binaries from F:\WINCE420\PUBLIC\MOBILE~1\WINCE420\CEPC\cesysgen\oak 3071 File(s) copied BUILDREL: Copying SYSGENED files from F:\WINCE420\PUBLIC\MOBILE~1\WINCE420\CEPC\cesysgen\oak\files 649 File(s) copied BUILDREL: Copying PROJECT(MOBILECEPC) binaries from F:\WINCE420\PUBLIC\MOBILE~1\WINCE420\CEPC\oak 4 File(s) copied BUILDREL: Copying PROJECT(MOBILECEPC) files from F:\WINCE420\PUBLIC\MOBILE~1\WINCE420\CEPC\oak\files 16 File(s) copied BUILDREL: Copying PLATFORM binaries from F:\WINCE420\platform\CEPC 29 File(s) copied BUILDREL: Copying PLATFORM files from F:\WINCE420\platform\CEPC\files 17 File(s) copied BUILDREL: Copying PLATFORM cesysgened files from F:\WINCE420\platform\CEPC\cesysgen\files 5 File(s) copied Updating project.bib with additional bib info ... fmerge for Windows CE (Release) (Built on Oct 22 2002 16Creating kernel image... makeimg for Windows CE (Release) (Built on Dec 14 2002 17makeimg: Check for F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\PreMakeImg.bat to run. makeimg: Found localization settings. makeimg: LOCALE: 0409 LOCALE3: (null) TargetDir: 0409 CodePage=1252 LocaleId: 409 PrimaryLandId: 9 SubLangId: 1 makeimg: Locale is 0409, retrieve files from usasnap directory. makeimg: Moving files from usasnap to release... makeimg: Read string substitutions from F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\intltrns\0409\ makeimg: Read string substitutions from F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\intltrns\0409\cepc.str makeimg: Read string substitutions from F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\intltrns\0409\common.str makeimg: Read string substitutions from F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\intltrns\0409\datasync.str makeimg: Read string substitutions from F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\intltrns\0409\directx.str makeimg: Read string substitutions from F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\intltrns\0409\iabase.str makeimg: Read string substitutions from F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\intltrns\0409\ie.str makeimg: Read string substitutions from F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\intltrns\0409\rdp.str makeimg: Read string substitutions from F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\intltrns\0409\shell.str makeimg: Read string substitutions from F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\intltrns\0409\viewers.str makeimg: Read string substitutions from F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\intltrns\0409\wceappsfe.str makeimg: Read string substitutions from F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\intltrns\0409\wceshellfe.str makeimg: Copy files from F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\intlfile\0409\ to release directory. makeimg: Creating F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\nlscfg.out because F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\country.cfg doesn't exist or contains a locale different from 0409. makeimg: run command: fmerge -nls F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\nlscfg.out F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\nlscfg.inf fmerge for Windows CE (Release) (Built on Oct 22 2002 16makeimg: run command: fmerge -txt F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\nlssrc.txt F:\WINCE420\public\common\oak\files\locale.txt F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\nlssrc.txt fmerge for Windows CE (Release) (Built on Oct 22 2002 16makeimg: run command: cenlscmp F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\nlssrc.txt F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\nlscfg.out F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\wince.nls F:\WINCE420\PUBLIC\mobilecepc\RelDir\CE PC_X~2\nlscpg.txt NLS data compression utility for Windows CE (Release) (Built on Dec 6 2001 17[Reading input file] Parsing locales: 007f 0403 0406 0407 0807 0c07 1007 1407 0409 0809 0c09 1009 1409 1809 1c09 2009 2409 2809 2c09 3009 3409 040a 080a 0c0a 100a 140a 180a 1c0a 200a 240a 280a 2c0a 300a 340a 380a 3c0a 400a 440a 480a 4c0a 500a 040b 040c 080c 0c0c 100c 14 0c 180c 040f 0410 0810 0413 0813 0414 0814 0416 0816 041d 081d 0421 042d 0436 0438 043e 083e 0441 0456 Parsing calendars: 0001 Parsing codepage(s): 437 850 1252 Parsed code pages. Parsing unicode tables Parsing sortkeys Parsing ideograph exceptions Parsing expansions Parsing exceptions Parsing compressions Parsing jamosorts Parsing case tables [Writing out nls file] Header: 588 bytes Writing out locales Locale 007f: 1104 bytes Locale 0403: 1100 bytes Locale 0406: 1052 bytes Locale 0407: 1160 bytes Locale 0807: 1220 bytes Locale 0c07: 1148 bytes Locale 1007: 1168 bytes Locale 1407: 1236 bytes Locale 0409: 1284 bytes Locale 0809: 1160 bytes Locale 0c09: 1276 bytes Locale 1009: 1128 bytes Locale 1409: 1164 bytes Locale 1809: 1060 bytes Locale 1c09: 1060 bytes Locale 2009: 1164 bytes Locale 2409: 1192 bytes Locale 2809: 1016 bytes Locale 2c09: 1092 bytes Locale 3009: 1256 bytes Locale 3409: 1340 bytes Locale 040a: 1248 bytes Locale 080a: 1260 bytes Locale 0c0a: 1248 bytes Locale 100a: 1284 bytes Locale 140a: 1268 bytes Locale 180a: 1268 bytes Locale 1c0a: 1348 bytes Locale 200a: 1316 bytes Locale 240a: 1276 bytes Locale 280a: 1236 bytes Locale 2c0a: 1264 bytes Locale 300a: 1188 bytes Locale 340a: 1176 bytes Locale 380a: 1252 bytes Locale 3c0a: 1260 bytes Locale 400a: 1252 bytes Locale 440a: 1144 bytes Locale 480a: 1128 bytes Locale 4c0a: 1132 bytes Locale 500a: 1144 bytes Locale 040b: 1172 bytes Locale 040c: 1160 bytes Locale 080c: 1244 bytes Locale 0c0c: 1124 bytes Locale 100c: 1176 bytes Locale 140c: 1184 bytes Locale 180c: 1252 bytes Locale 040f: 1208 bytes Locale 0410: 1144 bytes Locale 0810: 1184 bytes Locale 0413: 1224 bytes Locale 0813: 1144 bytes Locale 0414: 1120 bytes Locale 0814: 1124 bytes Locale 0416: 1364 bytes Locale 0816: 1264 bytes Locale 041d: 996 bytes Locale 081d: 1032 bytes Locale 0421: 1048 bytes Locale 042d: 1076 bytes Locale 0436: 1116 bytes Locale 0438: 1088 bytes Locale 043e: 1012 bytes Locale 083e: 1068 bytes Locale 0441: 1240 bytes Locale 0456: 1236 bytes Total for all locales: 79072 bytes Writing out calendars Calendar 1: 28 bytes Total for all calendars: 28 bytes Writing out code pages Codepage 437: 2724 bytes Codepage 850: 2704 bytes Codepage 1252: 2300 bytes Total for all codepages: 7728 bytes Writing out unicode tables Header: 48 bytes Ascii digits: 856 Compatibility zone: 2748 Compressions: 4230 Hiragana: 344 Katakana: 344 Halfwidth: 888 Fullwidth: 864 Ctypes: 16520 Total data: 26794 Writing out sort tables Header: 48 bytes SortMap: 86744 Reverse diacritics: 12 Double compressions: 0 SortMap locale exceptions: 1864 SortMap ideograph exceptions: 0 Locale compressions: 204 Uppercase tables: 2220 Lowercase tables: 2196 Expansions: 222 JamoSort Index: 2270 JamoSort Compose: 3390 Total data: 96630 Success parsing locale file makeimg: Check for F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\PreFmergeBib.bat to run. makeimg: run command: fmerge -bib F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\ce.bib F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\config.bib F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\common.bib F:\WINCE420\PUBLIC\mobilecepc\ RelDir\CEPC_X~2\postproc\dcom.bib F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\netcf.bib F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\ie.bib F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\script.bib F:\WINCE420\PUBLIC\mob ilecepc\RelDir\CEPC_X~2\postproc\servers.bib F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\rdp.bib F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\shellsdk.bib F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\shell.bib F:\WINCE 420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\wceshellfe.bib F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\wceappsfe.bib F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\viewers.bib F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postp roc\directx.bib F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\datasync.bib F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\SQLCE.bib F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\speech.bib F:\WINCE420\PUBLIC\mobilecepc\RelD ir\CEPC_X~2\postproc\project.bib F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\platform.bib fmerge for Windows CE (Release) (Built on Oct 22 2002 16makeimg: Check for F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\PostFmergeBib.bat to run. makeimg: Check for F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\PreFmergeReg.bat to run. makeimg: run command: fmerge -reg F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\reginit.ini F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\common.reg F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\dcom.reg F:\WINCE420\PUBLIC\mobilece pc\RelDir\CEPC_X~2\postproc\netcf.reg F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\ie.reg F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\script.reg F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\servers.reg F:\WINCE420\PUBL IC\mobilecepc\RelDir\CEPC_X~2\postproc\rdp.reg F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\shell.reg F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\wceshellfe.reg F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\wceappsfe.re g F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\viewers.reg F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\directx.reg F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\datasync.reg F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2 \postproc\SQLCE.reg F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\speech.reg F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\project.reg F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\postproc\platform.reg fmerge for Windows CE (Release) (Built on Oct 22 2002 16Error - still inside an if statement after parsing complete makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec). makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec). Error PB2505: Error executing #(F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\)makeimg.exe. MOBILECEPC - 4 error(s), 0 warning(s) Tag: [Q]: WMADMOD Tag: 59802
 - 6
 - [Q]: Keyboard key strokes' sound Hi all, WinCE 4.2: How to disable keyboard key strokes' sounds ? regards Ryan Tag: [Q]: WMADMOD Tag: 59800
 - 7
 - Unclear Portion in Pcienum shared code in platform builder hai, while i analysing the code in pci.c file in %_WINCEROOT%\Public\Common\Oak\Drivers\Ceddk\Test\Pcienum the following portion is unclear to me ,i feel that it may be related with pci bus ,pls explain the code if (function == 0 && !(pciConfig.HeaderType & 0x80)) { break; } } if (length == 0) { break; } } if (length == 0 && device == 0) { break; } } Thanking u Tag: [Q]: WMADMOD Tag: 59799
 - 8
 - same 4 PB error in every cepc build hai, i just creating cepc platforms in wince 4.2,but in every debug build same 4 error is showing ,i feel that it is a mistake in settings,experts pls help me,i tried my best in correcting the error. Error - still inside an if statement after parsing complete makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec). makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec). Error PB2505: Error executing #(F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\)makeimg.exe. MOBILECEPC - 4 error(s), 0 warning(s) Thanking u Tag: [Q]: WMADMOD Tag: 59797
 - 9
 - How to stop the wzcsvc for a wince platform Just as the title , and I want to use my own gui and service to config the wireless adapter, but i don't want to exclude it from the image. I just want to stop it!Thanks -- Composed with Newz Crawler 1.7 http://www.newzcrawler.com/ Tag: [Q]: WMADMOD Tag: 59795
 - 10
 - PB 4.2 error in keypad [Del.] key maping in RDP session Dear experts, We have found a strange behavior of some Windows CE 4.2 module, which is responsible for numeric keypad support. Maybe I am wrong and this is a problem originated in RDP of CE 4.2 ? Two test scenarios are compared. 1. Platform Builder 4.1 - works properly 2. Platform Builder 4.2 - error in [Del] key handling Test scenario description : Build a simple enterprise web pad or a thin client platform. We have used x86 processor on a simple device with a PS/2 standard keyboard connected to it, a CEPC would work. Include English locale only in your platform Display Based Devices->International->Locale Services- >English(US) National Language Support Only. Build a platform and deploy it. When it is up and ready, connect to a terminal server using included RDP feature. You can use either Windows 2000 Server or Windows 2003 Server, the only requirement is that either server should have additional national language installed on it, with a language selection indicator on a task bar. We have tested Russian. Then run some simple application, which can handle keystrokes, for example a notepad. Select Russian language in a task bar. Then press NumLock so it is toggled and it's led is lit. Now press [/] key on a numeric keypad, and / appears well, then press the [Ins] key on a numeric keypad, and 0 appears too. Then press [Del] key on a numeric keypad, but . will not appear, instead a corresponding Russian symbol appears under Windows CE 4.2, but . appears properly under CE 4.1 ! Why it is so !? If, say under Windows CE 4.2 Microsoft has decided to map all numeric keypad keys to appropriate national language keys, then it should be NumLock ON and [/] US -> respective national symbol for / NumLock ON and [Ins] US- > respective national symbol for 0 NumLock ON and [Del] US -> respective national symbol for . OR (like in CE 4.1 when national language in RDP session does not matter) NumLock ON and [/] is always / NumLock ON and [Ins] is always 0 NumLock ON and [Del] is always . But not the mixture of the two ! Please note : we do not include any locale into the platform in either case. This is done intentionally to isolate the problem occurring in CE 4.2. Did anybody else encounter such problem ? Doesn't have to be Russian language, maybe any other national language in RDP session is not working properly with numeric keypad keys ? Can someone provide a clue whether this should be searched in RDP area or in CE numeric keypad driver area (if that is separate from a keyboard driver) ? Thanks Sergei Tag: [Q]: WMADMOD Tag: 59793
 - 11
 - Prblm: WinCE 4.2 OS launch (hanging at kernel Start) hi: System Configuration: SDRAM ï? 64 Mbytes Address range is (0xA0000000 â?? 0xA4000000) Strata Flash ï? 32 Mbytes Address range is (0x00000000 â?? 0xA4000000) Software: Boot.bib file: MEMORY ; Name Start Size Type ; ------- -------- -------- ---- EBOOT A00C0000 00080000 RAMIMAGE ; 512 KB for code RAM A00B8000 00008000 RAM STACK A0050000 00068000 RESERVED SECTBUFF A0077C00 00000400 RESERVED DRV_GLB A1D53000 00001000 RESERVED BLOCK_BUF A1FF0000 00080000 RESERVED ; Total reserved area, which equals offset of the NK region in RAM g_dwRamImageStart 00000000 80248000 FIXUPVAR CONFIG COMPRESSION=ON PROFILE=OFF KERNELFIXUPS=ON SRE=ON ROMSTART=A00C0000 ROMWIDTH=32 ROMSIZE=00080000 MODULES ; Name Path Memory Type ; -------------- ---------------------------------------------- ----------- nk.exe $(_TARGETPLATROOT)\target\$(_TGTCPU)\$(WINCEDEBUG)\eboot.exe EBOOT CONFIG.BIB ; Name|Virtual/Cached |Size| Region Type MEMORY IF IMGFLASH ! NK 80248000 01000000 RAMIMAGE ; SDRAM 16MB: RAM 81248000 00C00000 RAM ; SDRAM 12MB: EDBG 8211D000 00020000 RESERVED ; x20000 for EBOOT - 3 Client memory pools of 24K (128K) ;end address is 0x8213D000 ENDIF IF IMGFLASH IF BUILD_ROM_BIN NK 98380000 01F80000 RAMIMAGE ; FLASH 32MB - 0x80000: Locate above EBOT image and configuration block ENDIF IF BUILD_ROM_NB0 NK 98300000 01E00000 RAMIMAGE ; FLASH 32MB - Replace EBOOT Image ENDIF RAM 81248000 00C00000 RAM ; SDRAM 12MB: ENDIF AUD_DMA 81E48000 0000A000 RESERVED SLEEP_SAV 81E52000 00001000 RESERVED DRV_GLB 81E53000 00001000 RESERVED CACHE_FLG 81E54000 0003C000 RESERVED DISPLAY 81E90000 00130000 RESERVED ; 1MB aligned BLOCK_BUF 81FC0000 00080000 RESERVED UNUSED_BUF 82040000 000DD000 RESERVED whql_sig 00000001 00002000 EXTENSION ; WHQL signature extension (6KB). ZBANK 86000000 00100000 RESERVED CONFIG ;@CESYSGEN IF !NK_NKNOCOMP COMPRESSION=ON ;@CESYSGEN ENDIF !NK_NKNOCOMP ;@CESYSGEN IF NK_NKNOCOMP COMPRESSION=OFF ;@CESYSGEN ENDIF NK_NKNOCOMP IF IMGPROFILER PROFILE=ON ENDIF IF IMGPROFILER ! PROFILE=OFF ENDIF KERNELFIXUPS=ON ROMFLAGS=0 IF IMGTRUSTROMONLY IF IMGNOTALLKMODE ROMFLAGS=12 ENDIF IF IMGNOTALLKMODE ! ROMFLAGS=10 ENDIF ENDIF IF IMGTRUSTROMONLY ! IF IMGNOTALLKMODE ROMFLAGS=2 ENDIF IF IMGNOTALLKMODE ! ROMFLAGS=0 ENDIF ENDIF IF IMGFLASH ! AUTOSIZE=ON ENDIF IF IMGFLASH ! ROMSTART=80248000 ROMWIDTH=32 ENDIF IF LOCALE=0411 ;JAPAN FSRAMPERCENT=0x60606060 ENDIF IF IMGFLASH ROMSTART=98300000 ROMWIDTH=32 ENDIF ; ; Save some room for Diagnostics Manager (DM) flashed in high memory ; ROMSIZE=01000000 ;16MB ;This defines the nk.nb0 file size Serial Debug Message: *******Beginning System Initialization******* CPU ID = A0 PXA255 SDCLK[1] = MemClk/2 MemClk = 99.53 MHz Run Mode = 2 * MemClk Turbo Mode = Run Mode Mode: TURBO Beginning SDRAM Scrub... SDRAM Scrub Complete ****************************************************** ****************************************************** ****************************************************** ****************************************************** ****************************************************** OEMInitDebugSerial using UART1 Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built Oct 27 2004 19:50:40 Microsoft Windows CE Ethernet Bootloader 3.3 for the TS/TV90 PXA255 Platform (Built Nov 16 2004) Press [ENTER] to download now or [SPACE] to cancel. Initiating image download in 5 seconds. 4 seconds. 3 seconds. 2 seconds. 1 seconds. Starting auto download ... Checking for SMC 91C111 Ethernet controller... LAN91C111: Chip Id 9 Revision 1 SMC MAC Address: 0:4:52:0:33:106 SMC 91C111 Ethernet controller initialized. System ready! Preparing for download... INFO: Using device name: 'XSC1BD8554' +EbootSendBootmeAndWaitForTftp Sent BOOTME to 255.255.255.255 -EbootProcessARP returning *PROCESS_ARP_REQUEST* Rajesh: Entering EbootProcessEDBG Locked Down Link 1 Src IP 172.20.25.32 Port 0400 Dest IP 172.20.25.56 Port 0D0B EthDown::TFTPD_OPEN::boot.bin -EbootSendBootmeAndWaitForTftp Download BIN file information: ----------------------------------------------------- [0]: Base Address=0x80248000 Length=0x1AE530 ****** Downloading operating system image for SDRAM target ****** Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr rom_offset=0x0. Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Found pTOC signature. Entering OEMIsFlashAddr Entering OEMIsFlashAddr ROMHDR at Address 80248044h RomHdr.ulRAMStart=80400000h RomHdr.physfirst=80248000h. Done. Writing 0xA00B8118 to flash address 0xB83C0300 (length=0xA3C). Sector=0x201 (Length=0x6) Block=0x1 (Length=0x1). Handling non-block aligned data... FlashErase: Unlocking flash block(s) [0x1, 0x1] (please wait): Done. Erasing flash block(s) [0x1, 0x1] (please wait): .Done. Writing to flash (please wait): Done. RAJESH: OEMLaunch: Inside fWait. Rajesh: Entering EbootProcessEDBG Got EDBG_CMD_JUMPIMG Got EDBG_CMD_CONFIG, flags:0x00000000 RAJESH:*** Entering ACK Packet *** Entering OEMIsFlashAddr INSIDE else of(OEMIsFlashAddr(dwLaunchAddr)) 0x80249000... Download successful! Jumping to image at physical 0xA0249000... Problem Statement: Using a Tiny kernel image for launching. Ported Ethernet Bootloader from XSC1BD BSP. We verified that the code is reaching the JUMP to Kernel Start. Please refer the serial debug messages also. With the Tiny kernel we included one Stream Interface LED Driver. Configured to load at Init. (BUILTIN key in platform.reg) I am not getting this LED toggling. So we concluded that the OS is not executing. Please suggest on the configuration we are using for tiny kernel & LED Driver. Thanks & regards, Tag: [Q]: WMADMOD Tag: 59792
 - 12
 - [Q]: Dhyrstone & Whetstone Hi all, I am working on WinCE 4.2. What are Dhrystone and whetstone ? I came across one link in msdn which had some information in this regards, thats says: Dhrystone is a suite of arithmetic and string manipulating programs. Since the whole program is less then 8 kBytes, it fits into the processor cache. It can be used to measure two aspects both the processor's speed as well as the optimizing capabilities of the compiler. The resulting number is the number of executions of the program suite per second. Can anyone put more light on this along with 'whetstone'. regards sajid Tag: [Q]: WMADMOD Tag: 59790
 - 13
 - Re:Different image download method Related to the post a little below this entry. I have an nk.bin image created elsewhere (ie no source). Is it possible to use Platform Builder to launch that image? -- David Jones Senior Lecturer School of Electrical & Computer Engineering RMIT University +61 3 99255318 Tag: [Q]: WMADMOD Tag: 59786
 - 14
 - Build and Release SDKs? Is the SDK created with the Platform >Buld SDK command different when the build and release configurations are selected? I need to know if it should be run once for each configuration just as platform builds would be, or if the built SDK is the same for both. Tag: [Q]: WMADMOD Tag: 59782
 - 15
 - Transcriber on top of RDP I am trying to use transcriber on top of RDP, but I got "Transcriber operation over Remote Desktop is not supported. See your system documentation for more information." I do not have any similar problem with ICA. Any hints to enable it on RDP? I am using CE 4.2. Thanks, John. Tag: [Q]: WMADMOD Tag: 59776
 - 16
 - Different image download method Hello, I have a customized CE image that I created using Platform Builder. After I download and test the CE image to make sure it works, from the CE platform I have to copy NK.BIN from the 'Release' folder to the 'Hard Disk' folder in order to subsequently boot from that new image. Is there a way to tell Platform Builder to download the CE image to the 'Hard Disk' folder directly? Hardware currently: Parvus PC-104 board Also, what is the method of choice for copying a customized CE image to the device in a production setting? Thanks in advance. Edward Tag: [Q]: WMADMOD Tag: 59766
 - 17
 - Buffer size for IssueBulkTransfer Our platform is a USB host and we have been experiencing problems with IssueBulkTransfer() when requesting a bulk in or out transfer of 1K or more in the drivers we are developing for a device. The problem is the same in CE 3.0 and 4.2 -we have not tried 5.0 yet. The call is made with lpvBuffer and uBufferPhysicalAddress set to zero. IssueBulkTransfer returns with zero bytes transfered and no action occurs on the bus. We suspect it has to do with exceeding the space available in an internal buffer, but do not understand why it is happening. Our use of IssueBulkTransfer are similar to those in the BOT.cpp and CBIT.cpp. We recently tried a USB Mass Storage Device and tried to copy files. A file of 622 bytes transferred correctly. The file of 2.5K hung the system. thanks Steve Tag: [Q]: WMADMOD Tag: 59765
 - 18
 - Problem Cloning PUBLIC directory Hi Folks- I'm trying to clone the ATADISK driver from the PUBLIC tree of PlatformBuilder 5.0 and having some problems getting it to compile. Any help is greatly appreciated. I copied the files to a directory named ATADISK under PLATFORM\MyXscale\SRC\DRIVERS. I edited the sources file by changing the line: WINCETARGETFILE0=$(_COMMONOAKROOT)\lib\$(_CPUINDPATH)\$(TARGETDEFNAME).def to be WINCETARGETFILE0=$(_PROJECTOAKROOT)\lib\$(_CPUINDPATH)\$(TARGETDEFNAME).def When I try do compile using build -c, I get the following output (error message included). Any ideas what I'm doing wrong? I've also tried to compile the DLL directly by commenting out the DOSYSGEN line and get the output at the end. Thanks for any help. -Brian [output from building .lib file] C:\WINCE500\PLATFORM\MyXscale\SRC\DRIVERS\ATADISK>build -c Build for Windows CE (Release) (Built on Apr 22 2004 10:38:01) File names: Build.log Build.wrn Build.err Build.dat BUILD: [Thrd:Sequence:Type ] Message BUILD: [00:0000000000:PROGC ] Checking for \WINCE500\sdk\bin\i386\srccheck.exe. BUILD: [00:0000000001:PROGC ] SrcCheck exit code: 0 (dec). BUILD: [00:0000000002:PROGC ] Compile and Link for ARM. BUILD: [00:0000000003:PROGC ] Loading C:\WINCE500\PLATFORM\MyXscale\Build.dat. BUILD: [00:0000000004:PROGC ] Done. BUILD: [00:0000000005:PROGC ] Computing include file dependencies: BUILD: [00:0000000006:PROGC ] Checking for SDK include directory: C:\WINCE500\sdk\ce\inc. BUILD: [00:0000000007:PROGC ] Scan \WINCE500\PLATFORM\MyXscale\SRC\DRIVERS\ATADISK\ BUILD: [00:0000000010:PROGC ] Total of 0 pass zero files to compile in 1 directories. BUILD: [00:0000000011:PROGC ] Building generated files in \WINCE500\PLATFORM\MyXscale\SRC\DRIVERS\ATADISK\. BUILD: [01:0000000018:ERRORE] NMAKE : U1073: don't know how to make 'C:\sandbox\sw\x3v\wince500\x3vproj\WINCE500\MyXscale_ARMV4I\oak\lib\ARMV4I\debug\atadisk.def' BUILD: [01:0000000020:ERRORE] NMAKE.EXE -i -c BUILDMSG=Stop. NOLINK=1 PASS0ONLY=1 CLEANBUILD=1 failed - rc = 2 BUILD: [00:0000000021:PROGC ] Files Warnings Errors BUILD: [00:0000000022:PROGC ] Midl 0 0 0 BUILD: [00:0000000023:PROGC ] Resource 0 0 0 BUILD: [00:0000000024:PROGC ] Message 0 0 0 BUILD: [00:0000000025:PROGC ] Precomp Header 0 0 0 BUILD: [00:0000000026:PROGC ] C/Cpp/Cxx 0 0 0 BUILD: [00:0000000027:PROGC ] Assembler 0 0 0 BUILD: [00:0000000028:PROGC ] Static Libraries 0 0 0 BUILD: [00:0000000029:PROGC ] Dll's 0 0 0 BUILD: [00:0000000030:PROGC ] Exe's 0 0 0 BUILD: [00:0000000031:PROGC ] Resx 0 0 0 BUILD: [00:0000000032:PROGC ] Csharp Targets 0 0 0 BUILD: [00:0000000033:PROGC ] Other 0 0 2 BUILD: [00:0000000034:PROGC ] BUILD: [00:0000000035:PROGC ] Total 0 0 2 BUILD: [00:0000000036:PROGC ] BUILD: [00:0000000037:PROGC ] 0 Warnings, 2 Errors [output from building .dll file] C:\WINCE500\PLATFORM\MyXscale\SRC\DRIVERS\ATADISK>build -c Build for Windows CE (Release) (Built on Apr 22 2004 10:38:01) File names: Build.log Build.wrn Build.err Build.dat BUILD: [Thrd:Sequence:Type ] Message BUILD: [00:0000000000:PROGC ] Checking for \WINCE500\sdk\bin\i386\srccheck.exe. BUILD: [00:0000000001:PROGC ] SrcCheck exit code: 0 (dec). BUILD: [00:0000000002:PROGC ] Compile and Link for ARM. BUILD: [00:0000000003:PROGC ] Loading C:\WINCE500\PLATFORM\MyXscale\Build.dat. BUILD: [00:0000000004:PROGC ] Done. BUILD: [00:0000000005:PROGC ] Computing include file dependencies: BUILD: [00:0000000006:PROGC ] Checking for SDK include directory: C:\WINCE500\sdk\ce\inc. BUILD: [00:0000000007:PROGC ] Scan \WINCE500\PLATFORM\MyXscale\SRC\DRIVERS\ATADISK\ BUILD: [00:0000000010:PROGC ] Total of 0 pass zero files to compile in 1 directories. BUILD: [00:0000000011:PROGC ] Building generated files in \WINCE500\PLATFORM\MyXscale\SRC\DRIVERS\ATADISK\. BUILD: [00:0000000019:PROGC ] Scan \WINCE500\PLATFORM\MyXscale\SRC\DRIVERS\ATADISK\ BUILD: [00:0000000022:PROGC ] Compiling \WINCE500\PLATFORM\MyXscale\SRC\DRIVERS\ATADISK\ directory. BUILD: [01:0000000029:PROGC ] Compiling .\system.c BUILD: [01:0000000032:PROGC ] Compiling .\diskio.c BUILD: [01:0000000035:PROGC ] Linking C:\WINCE500\platform\MyXscale\lib\ARMV4I\debug\atadisk.lib BUILD: [00:0000000047:PROGC ] Linking \WINCE500\PLATFORM\MyXscale\SRC\DRIVERS\ATADISK\ directory. BUILD: [01:0000000054:ERRORE] NMAKE : U1073: don't know how to make 'C:\sandbox\sw\x3v\wince500\x3vproj\WINCE500\MyXscale_ARMV4I\cesysgen\sdk\lib\ARMV4I\debug\storeapi.lib' BUILD: [01:0000000056:ERRORE] NMAKE.EXE -i -c BUILDMSG=Stop. LINKONLY=1 NOPASS0=1 MAKEDLL=1 failed - rc = 2 BUILD: [00:0000000057:PROGC ] Files Warnings Errors BUILD: [00:0000000058:PROGC ] Midl 0 0 0 BUILD: [00:0000000059:PROGC ] Resource 0 0 0 BUILD: [00:0000000060:PROGC ] Message 0 0 0 BUILD: [00:0000000061:PROGC ] Precomp Header 0 0 0 BUILD: [00:0000000062:PROGC ] C/Cpp/Cxx 2 0 0 BUILD: [00:0000000063:PROGC ] Assembler 0 0 0 BUILD: [00:0000000064:PROGC ] Static Libraries 0 0 0 BUILD: [00:0000000065:PROGC ] Dll's 1 0 0 BUILD: [00:0000000066:PROGC ] Exe's 0 0 0 BUILD: [00:0000000067:PROGC ] Resx 0 0 0 BUILD: [00:0000000068:PROGC ] Csharp Targets 0 0 0 BUILD: [00:0000000069:PROGC ] Other 0 0 2 BUILD: [00:0000000070:PROGC ] BUILD: [00:0000000071:PROGC ] Total 3 0 2 BUILD: [00:0000000072:PROGC ] BUILD: [00:0000000073:PROGC ] 0 Warnings, 2 Errors Tag: [Q]: WMADMOD Tag: 59760
 - 19
 - Bug in IEEE1394/Firewire driver in CE5.0 The IEEE1394 driver has a severe bug which stops it from working on platforms with an address-space greater then 32 bit ( like the 36 bit AMD Au1550 Mips processor). When calling the MmMapIoSpace function only the lower 32 bits of the physical address are passed to the function and the wrong address is mapped. The driver ist binary only so I can't fix it myself. Tag: [Q]: WMADMOD Tag: 59757
 - 20
 - Adding a Font to Platform Builder catalog Is there a way to add a new true-type font to Windows CE.NET 4.2? I would like to add a font that is not in the Platform Builder catalog list of fonts (specifically a 7-segment display font). If this can be done in 4.2, is the same process used to add it to Windows CE 5.0? Thanks, Craig Whatley Tag: [Q]: WMADMOD Tag: 59749
 - 21
 - Display Controller on PXA255 I am using CE 4.2 and the XSC1BD LCD display driver. I am trying to run a 640x480 color display ( Optrex T-51513D104JU-FW-A-AC ). This display has DENA (data enable line) which is connected to the L_BIAS line on the PXA255 display controller. I have put a scope on the H_SYNC and V_SYNC lines and they appear to be in spec as required by the display, however, the DENA line is always HIGH. This does not appear to be what the display wants to see. I can not seem to get the PXA255 to toggle this line. Here is how I currently have the PXA255 display controller configured: v_pLcdRegs->LCCR1 = ( LCD_PPL(639) | LCD_HSW(63) | LCD_ELW(15) | LCD_BLW(138) ); v_pLcdRegs->LCCR2 = ( LCD_LPP(479) | LCD_VSW(35) | LCD_EFW(13) | LCD_BFW(33) ); v_pLcdRegs->LCCR3 = ( LCD_PCD(PCD) | LCD_ACB(0x6) | // was ACB=0 LCD_PCP | LCD_BPP(BPP) | LCD_HSP | LCD_VSP ); v_pLcdRegs->LCCR0 = ( LCD_LDM | LCD_SFM | LCD_IUM | LCD_EFM | LCD_BM | LCD_PDD(0x0) | LCD_PAS); Can anyone give me some advice on a next step to take? Is there another newsgroup that is focused on the PXA255 specifically? Thanks, Jeff Tag: [Q]: WMADMOD Tag: 59746
 - 22
 - How to Backup POOM contect in CE database hello, i faced a problem, how to backup POOM content like canlender, contacts, and so on. i thought, there are 2 approachs a copy db files , or open database to read record one by one. in the 1st approach, i don't know the .db files in platform builder is it the .db file which hold all POOM content in the 2nd approach, the reading one by one is very slow process, and i don't record id to looking for could you show me how to read all record. thank you in advance, sze yee Tag: [Q]: WMADMOD Tag: 59741
 - 23
 - Is wzcsvc a driver or a service? I've checked the registry and the CE 5.0 help, they all point out that wzcsvc is a driver, but what kind of driver it is? A protocol driver or anyother driver? Thanks! Tag: [Q]: WMADMOD Tag: 59740
 - 24
 - about GWES and GPE in display driver Hi: I am developing a display driver in WinCE5.0, but I don't understand the relation between GPE and GWES. Should I re-implement the 27 functions filled in the DRVENABLEDATA structure by DrvEnableDriver? Tag: [Q]: WMADMOD Tag: 59736
 - 25
 - RAS Server problem Hi, all I have some problem in using RAS Server in CE.net 4.2. I used the demo program called RASServer in PB. Here is what I did: 1, Add Ras Server/PPTP Server(Incoming) component; 2,I set registry as the help files told as below; [HKEY_LOCAL_MACHINE\Comm\Tcpip\Parms] "ArpUseEtherSNAP"=dword:0 "AutoCfg"=dword:1 "DefaultTOS"=dword:0 "DefaultTTLREG"=dword:128 "DNSDomain"="" "EnableDeadGWDetect"=dword:0 "EnableDHCP"=dword:0 "IGMPLevel"=dword:2 "IPEnableRouter"=dword:0 "NoIdleIfAdapter"=dword:0 "NoIdleIfConnected"=dword:0 "SackOpts"=dword:1 "TCP1323Opts"=dword:0 "TcpMaxConnectResponseRetransmissions"=dword:2 [HKEY_LOCAL_MACHINE\Comm\RTL81391\Parms\Tcpip] "AutoCfg"=dword:0 "AutoInterval"=dword:300 "AutoIP"="" "AutoMask"="255.255.0.0" "AutoSubnet"="" "DefaultGateway"="" "DhcpGlobalInitDelayInterval"=dword:0 [HKEY_LOCAL_MACHINE\Comm\ppp\Server\Parms] "UseAutoIPAddresses"=dword:1 "UseDhcpAddresses"=dword:0 "AutoIPSubnet"=dword:C0A80000 "AutoIPSubnetMask"=dword:FFFF0000 "StaticIPAddrStart"=dword:C0A8FE01 "StaticIpAddrCount"=dword:254 "AuthenticationMethods"=dword:0 "Flags"=dword:0 "Enable"=dword:0 "StartupDelaySeconds"=dword:20 3, Use direct connection mode through a null modem line to the two machines' COM1:, and the ports works fine. 4. Run the demo RasServer on CE device without problem. 5. When I tried to dial in from another PC, I got no response. After I inspected the registry on the CE device, I found a line was added successfully. So the RAS Server is running successfully. I guess some registry settings may be missing or be wrong. In the registry I found a problem: I found nowhere to set the serial port's baud rate. In CE, how to synchronize the baud rate on my both machine? Thanks! maverick Tag: [Q]: WMADMOD Tag: 59733
- Next
 - 1
 - Loading NK.BIN in the production mode Hello, I have a customized CE image that I created using Platform Builder. After I download and test the CE image to make sure it works, from the CE platform I have to copy NK.BIN from the 'Release' folder to the 'Hard Disk' folder in order to subsequently boot from that new image. Is there a way to tell Platform Builder to download the CE image to the 'Hard Disk' folder directly? Also, what is the method of choice for copying a customized CE image to the device in a production setting? Thanks in advance. Shane Tag: [Q]: WMADMOD Tag: 59727
 - 2
 - PC104 and PC104 Plus Question We are starting a new windows CE project on a SBC with a PC104 bus. I was told that we should use a SBC computer that uses PC104 Plus interface because that is PCI and that is the interface that Windows CE drivers expect to see to talk to various peripherals. We will be using the PC104/PC104-Plus bus to connect to an IO board that will have other interfaces on it like ethernet, more USB, maybe CAN, Parallel IO and WiFi. Is it true that we should look for a PC104-Plus board over a PC104 board? Thanks. Tag: [Q]: WMADMOD Tag: 59726
 - 3
 - PCMCIA question I added some debug statements to track what the PCMCIA driver is doing. From the output below you can see that we are writing large blocks of data to the PCMCIA card. Can anyone tell me what the client ISRs are and why we always get ten calls to them? For smaller sector writes we get 1 call but for the most part they are always 10. Does the code simply split up request into 10 interrupts? If so, why? Thanks, Nick. Writing 0x00000100 sector(s) starting at 0x0003a38c. PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR Writing 0x000000b0 sector(s) starting at 0x0003a48c. PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR Reading 0x00000020 sector(s) starting at 0x00023ecc. PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR Writing 0x00000020 sector(s) starting at 0x00023ecc. Tag: [Q]: WMADMOD Tag: 59725
 - 4
 - A HID device with Multiple interfaces Ok, so I have a keyboard here and when I look at what happens when it gets connected to the system, I see that there are two interfaces. The first interface has only 1 associated device with it, a keyboard hid device. The second interface, has 3. The first, a system control hid (sleep/wakeup keys), a consumer hid( ff, rw play keys) and a vendor defined hid (don't care). I've been told to write 1 HID driver that will handle all event 4 hid events (actually only 2, keyboard and consumer). After some digging this seems possible in windows 2000/XP/2003 by having a key with a only a vendor ID, product ID and rev versus a Vendor ID, Product ID, rev and Interface ID. Is the same thing possible under CE? Can I have 1 driver load that will handle all the HIDs across both interfaces? I know that the device ID keys are different under Windows CE. I know they are something like : [HKEY_LOCAL_MACHINE\Drivers\HID\LoadClients\VID_PID_REV\Interface_Collection\UsagePage_Usage\Keyboard]. So, any suggestions? Or should I just quit and open a flower shop? -- Using Opera's revolutionary e-mail client: http://www.opera.com/m2/ Tag: [Q]: WMADMOD Tag: 59724
 - 5
 - DirectShow Filter DLL registration problem on CE .NET Hi All, I built the filter DLLs of the Microsoft sample codes (DUMP, EZRGB24) using embedded Visual C++. However, I couldn't get them registered both on the device and on the Emulator. It seems that AMovieDllRegisterServer2() is not support in CE so I changed it back to AMovieDllRegisterServer(). Another two points that I haven't followed their instructions are: 1. Instead of setting the entry-point symbol to DllmainCRTStartup@12, only the default DllmainCRTStartup works 2. I didn't build the base class library by myself, do I have to build my own? Should it be DLL or static library? Does anyone have experience on building your own DirectShow filter on CE .NET? Thanks in advance, Steven Tag: [Q]: WMADMOD Tag: 59719
 - 6
 - "Storage Card" folder stays for 4 seconds after the SD or CF card is removed. On this one CE.NET 4.2 platform, each time I remove the SD card or CF storage card, the "Storage Card" folder will not disppear until after 4 seconds. On other 4.2 platforms the folder disppear immediately after the card is removed. I put debug messages in the SDMMC driver, the SDMMC loader detects the card is removed and unloads the SDMMC driver immediately after the card is removed. So what is causing the 4 seconds delay? Tag: [Q]: WMADMOD Tag: 59718
 - 7
 - Where is the Configuration Combo Box? Whenever I open my platform's workspace in plaform builder I message box appears with this message: "One or more unsupported configurations were found in the selected Platform Builder project file. The configurations will be grayed out in the configuration combo box." I need to see this combo box to find out what these unsupported configurations are. I did a search in online help for "configuration combo box" and did not come up with anything. Where is this "configuration combo box" ? Tag: [Q]: WMADMOD Tag: 59716
 - 8
 - USB Function Driver PDD layer All, I am working with a Windows CE 5.0 USB function driver's PDD layer. My processor is pxa255, and I have copied the 2 dirs in the existing function driver from the CSP directory under ARM\Intel\Pxa25x\Usb\Function to my platform's Drivers dir. I have modified the Lib\pxa25xufnlib.cpp to include hardware specifics of attachment, detachment, power on, power off etc, but left the code in the Pdd dir as is. The sources file in the two directories are setup to generate 2 lib files pxa25xufnlib.lib and pxa25xusbfn_lib.lib. What is the usage model that was envisioned for the usage of these libraries? I believe I need to generate a .dll that links both the mdd layer in ufnmddbase.lib and the pdd libs above, but I have not found code that "binds it all together". Regards, Inger M. K. Tag: [Q]: WMADMOD Tag: 59711
 - 9
 - problem loading driver Iam trying to load a stream interface driver "gendriver.dll" using an application on the Smartphone 2003 emulator. Following is the registry entry that i created. [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\gendriver] "Prefix"="GEN" "Dll"="gendriver.dll" "Order"=dword:0 When i use the ActivateDeviceEx(_T("Drivers\\BuiltIn\\Gendriverl"),NULL,0,NULL), It returns NULL and GetlastError() returns '2' ie, "The system cannot find the file specified" error. But the file is available on emulator in \\windows ,confirmed through remote file viewer. I get a valid handle for ActivateDeviceEx(_T"Drivers\\BuiltIn\\Serial"),NULL,0,NULL) Also tried unsuccessfully with the following change in the registry [HKEY_LOCAL_MACHINE\Drivers\gendriver] "Prefix"="GEN" "Dll"="gendriver.dll" "Order"=dword:0 Tag: [Q]: WMADMOD Tag: 59705
 - 10
 - PASSTHRU NDIS Intermediate Driver and IP address problem under WinCE 4.2 Hi everyone, I have used the passthru sample from the WinCE4.2 platform builder to create my own intermediate driver. I have call it IMdriver.dll and these are the registry entries I have added in the registry: HKEY_LOCAL_MACHINE\Comm\IMdriver1 NoDeviceCreate = 1 ImagePath = "IMdriver.dll" Group = "NDIS" I have not used any of the "Bind" or "ProtocolsToBindTo" since I wanted my intermediate driver to bind to any available miniport. I have install the driver to a PocketPC 2003 and have tried it using my miniport driver. Now, here is my problem. As soon as the device associates to the network, using WZCS, the oid OID_GEN_NETWORK_LAYER_ADDRESSES is set to the miniport with a valid IP address. If I try to ping my device from a remote station, it works fine. However, in the adapter's information where the IP should appear, I get an invalid IP address. In addition, when I searched in the registry I found out that the correct TCPIP configuration was under HKEY_LOCAL_MACHINE\Comm\IMdriver1\TCPIP instead of HKEY_LOCAL_MACHINE\Comm\MyMiniport\TCPIP, which had all zeros. I do not need to say that the IP is never renewed and the WZCS pops up the dialog that indicates I do not a connection with a valid IP and asks me to select a new access point. Does anybody know why the TCP/IP settings have been bound to the intermediate driver instead of the miniport? As I understand it look like my intermediate has not been "sandwitched" between the miniport and the protocols successfully. Any help will be greatly appreciated. Michalis Koundourakis Tag: [Q]: WMADMOD Tag: 59695
 - 11
 - CE 5.0 CEC File Hi, can anybody from MS tell me how we can use our painful created ce4.x catalogs? We use it only to copy and register ready compiled files to our platforms. And it was not easy to manage those hundreds of settings. I read in Help that: BIBInfo blocks are deprecated; BuildMethod blocks are now only used to specify supported CPUs and provide links to source files, Help documentation (.chm), and Platform Builder project (.pbpxml) files. So do we now have to manage all our compex files and settings in project.bib and project.reg? And do all the work again?? Tag: [Q]: WMADMOD Tag: 59694
 - 12
 - CE 5.0 compiling \PRIVATE\WINCEOS missing 'ndislink.h' error Can someone help me slove the error I got here? Thanks. BUILD: [00:0000000897:PROGC ] Compiling \WINCE500\PRIVATE\WINCEOS\COMM\BLUETOOTH \TDI\ directory. BUILD: [01:0000000906:PROGC ] Compiling .\tdi.cxx BUILD: [01:0000000909:ERRORE] e:\WINCE500\PRIVATE\WINCEOS\COMM\BLUETOOTH\TDI\tdi .cxx(55) : fatal error C1083: Cannot open include file: 'ndislink.h': No such fi le or directory BUILD: [01:0000000910:PROGC ] Linking E:\WINCE500\public\COMMON\oak\lib\ARMV4I\r etail\bttdi.lib BUILD: [01:0000000912:ERRORE] LINK : fatal error LNK1181: cannot open input file 'obj\ARMV4I\retail\tdi.obj' Tag: [Q]: WMADMOD Tag: 59689
 - 13
 - How to copy file in a readonly system? Hi, all Yesterday I found in a ce system that any action which tries to copy files is forbidden, a pop-up window says that system is a rom. I guess that due to choosing the feature of ROM-only file system in PB when building the NK.bin. So, there is another question: how can I get the file out,say copy, from the system when the system is a rom? Or, it's a mission imporssibble? THX maverick Tag: [Q]: WMADMOD Tag: 59684
 - 14
 - Failed to add the CoCreateGuid functionality for OLE32 feature This is a multi-part message in MIME format. ------=_NextPart_000_000A_01C4CA81.9824D880 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable When refreshing features I get this Warning: Warning PB2012: Failed to add the CoCreateGuid functionality for OLE32 = feature (SYSGEN_OLE_GUIDS) to the platform. ... 1 warnings found. Not all features or drivers could be added. The build = system will automatically include these when you build the platform. I do not know what to do about it. I also do not understand the message = at the bottom. I driver can be added or it cannot. How is it that it = cannot be added at refresh time but be automatically included at build = time? I have a suspicion this error has something to do with the addition of = regsvr32.pbp to the build. I had to add the ole32.lib to to it. To see = everything I had to do to this project in the build so far please see my = "Adding RegSvr32.pbp To The Platform Causes Errors" thread. ------=_NextPart_000_000A_01C4CA81.9824D880 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.2900.2523" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff background=3D"">When = refreshing=20 features I get this Warning: Warning PB2012:  Failed to add = the=20 CoCreateGuid functionality for OLE32 feature (SYSGEN_OLE_GUIDS) to the=20 platform. ... 1 warnings found. Not all features or drivers could = be=20 added. The build system will automatically include these when you build = the=20 platform. I do not know what to do about it. I also do not = understand the=20 message at the bottom. I driver can be added or it cannot. How is it = that it=20 cannot be added at refresh time but be automatically included at build=20 time? I have a suspicion this error has something to do with the = addition=20 of regsvr32.pbp to the build. I had to add the ole32.lib to to it. To = see=20 everything I had to do to this project in the build so far please see my = "Adding RegSvr32.pbp To The Platform = Causes=20 Errors" thread.</BODY></HTML> ------=_NextPart_000_000A_01C4CA81.9824D880-- Tag: [Q]: WMADMOD Tag: 59683
 - 15
 - where to store the hive directory? Hi, all I use Hive-based registry in my NK.bin. And system will generate a directory named "Documents and Settings" on the root after booting. I want to move it onto my Compact Flash. How can I manage to do it? I tried to modify the following registry,but failed. [HKEY_LOCAL_MACHINE\init\BootVars] ; "SYSTEMHIVE"="Documents and Settings\\system.hv" "SYSTEMHIVE"="\\HardDisk\\Documents and Settings\\system.hv" ; "PROFILEDIR"="Documents and Settings" "PROFILEDIR"="\\HardDisk\\Documents and Settings" "Start DevMgr"=dword:1 THX Tag: [Q]: WMADMOD Tag: 59682
 - 16
 - WBTSHELL can not work! Hello Every Guru, I am a new baby of using CE.NET PB 4.2. I am trying to use the WIZARD to build a Windows Thin Client platform. I thought that once I select from the Wizard to build a WBT will get a WBTSHELL for my x86 device. But I can not get the WBTSHELL, I get a Standard Shell instead. Who can help me out for this problem? I also notice that there is a file "rdp.reg", should I try to include this file in some where? Is there anyone can help me to build a WBT? Thanks in advance. Jack Wu Tag: [Q]: WMADMOD Tag: 59671
 - 17
 - binfs hi, i read in the mailing list that if we want to support binfs we have to build multiXIP image. i dont understand the necessity for this. i have nor flash and nand flash on my hardware. i will store eboot in nor flash and wince image in nand flash. my necessity is as follows i have to give support in eboot to download the store the wince image in nand flash(i am studying the support given in s3c2410 BSP) i will not mount binfs after wince boot. should i have to change to generate multiplexip to give the required functionality? can i store and read nk.bin(single xip)? Regards sharath Tag: [Q]: WMADMOD Tag: 59670
 - 18
 - cs8900 halt hi all my cs8900 driver will halt after work a while . I use serial kitl to debug it , and found there are 2 problems . 1 , interrupt not be detected . ndis calls MiniportDisableInterrupt to disable interrupt first ,then MiniportHandleInterrupt to do some processing ,finally MiniportEnableInterrupt . this is the whole processing with a receive packet interrupt accurs. But after some while MiniportDisableInterrupt will never be called .I don't know what happened . 2 , MiniportSendPackets triggers MiniportReset then the driver halted. What situation will cause NDIS call MiniportReset ? Thank you in advance. Tag: [Q]: WMADMOD Tag: 59669
 - 19
 - [Q]: Waveapi thread priority Hi all, How do I set the waveapi thread [SPS_Thread] priority ? Is there any registry setting for the same as present for audevman thread[CSmixer::MixerThreadMain] as below: [HKEY_LOCAL_MACHINE\Audio\SoftwareMixer] "Priority 256"=dword:dc regards Ryan Tag: [Q]: WMADMOD Tag: 59668
 - 20
 - Audio Driver IOCTL_MIX_MESSAGE has not been called Platform: SMDK2410 CE Version: 4.20 Target: to support mixer api The original driver provided by Samsung does not support IOCTL_MIX_MESSAGE in WAV_IOControl function. Our actions: 1. deal IOCTL_MIX_MESSAGE in WAV_IOControl 2. make sure waveapi.dll has been loaded 3. make sure audio driver wavedev has been loaded 4. An application calls mixerGetNumDevs, waveapi debug outs +WAM_Open -WAM_Open IOCTL_MIXER_GET_NUM_DEVS but IOCTL_MIX_MESSAGE has not been called, even WAV_IOControl has not been called Anyono can help me? Thanks in advance! Gowhawk Tag: [Q]: WMADMOD Tag: 59667
 - 21
 - WinCE QFE releases for the week of November 8 - November 12, 2004 The following updates for Windows CE have been recently released and are available for download. More information for each update is provided in the Readme document available after the individual update(s) has been installed. Windows CE 3.0 Update name: Windows CE 3.0 Platform Builder QFE 041108_KB883487 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=595AD93D-6D72-4CF8-AF53-64AF569EAC9B&displaylang=en Component: JScript, VBScript Description: Error handling by JScript and VBScript may cause a memory leak Windows CE .NET 4.0 Update name: Windows CE .NET 4.0 Platform Builder QFE 041105_KB888087 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=F9271F99-9583-4645-B6A3-139C9028DF97&displaylang=en Component: RDP Description: This update addresses possible SmartCard redirection issue. Windows CE .NET 4.2 Update name: Windows CE .NET 4.2 Platform Builder QFE 041103_KB888517 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=82A50211-13FA-4180-90AC-05643663FDD8&displaylang=en Component: URLMON Description: An exception may occur when parsing HTML file using Wininet API. Update name: Windows CE .NET 4.2 Platform Builder QFE 041105_KB885273 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=4380C9EC-5965-4B34-A9FA-3D1B4A3FB036&displaylang=en Component: 1394 Description: Windows CE .NET 4.2 may not always enforce data DWORD alignment requirement of 1394 SBP-2 protocol. This may result in some issues when reading/writing files. Windows CE 5.0 Update name: Windows CE 5.0 Platform Builder QFE 041101_KB885849 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=36C48D0C-6689-4272-A9FC-B7DCBE8BDA53&displaylang=en Component: pMail Description: Out of memory condition may occur when creating more then 150 emails. Update name: Windows CE 5.0 Platform Builder QFE 041104_KB838781 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=C0013B44-F13C-4F15-8126-118E7926BAAC&displaylang=en Component: USB driver Description: This is an update to the ARMV4I USB Function device driver. Update name: Windows CE 5.0 Platform Builder QFE 041110_KB887585 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=3E777B14-12E4-460E-8E49-E6D22503945F&displaylang=en Component: VoIP Description: VoIP UI settings do not get written to the registry and may get lost if the device is rebooted Download Link - directs you to the Microsoft Download Center page associated with each update. Each update is contained in a self-extracting compressed file. Component - displays the module(s) updated in each QFE Description - provides more information on the issue(s) fixed **DO NOT REPLY - THIS E-MAIL IS BEING SENT TO YOU FROM AN UNMONITORED ACCOUNT. Due to Microsoft's security requirements, the hyperlink(s) contained in this e-mail may not automatically open your browser. If you experience any difficulty, please copy the link and paste into your browser. ** Tag: [Q]: WMADMOD Tag: 59661
 - 22
 - 10ms IST latency I am new to Win CE and cant understand why I am having such a long latency on my IST. My hardware is generating a 1kHz interrupt on IRQ5. I am running CE 4.2. I measured over 10 ms (milliseconds!!!!!) of delay between the interrupt and my IST. Can anyone explain why there is such a delay? Is it how I built my OS image? Tag: [Q]: WMADMOD Tag: 59654
 - 23
 - Platform Builder 5.0 doesn't allow Windows XP SP2 to shut down I am running Windows XP SP2 on an Asus AMD 64 mother board. I installed the trial version of PB 5.0 the other day. Since that time when I go to shut down the computer gets to the screen that says "Windows is shutting down". The mouse cursor is active for a few seconds and then the computer freezes. The power light on the computer starts to blink at this time. I tried to think of all the things I have done to my computer over the last couple days and the only thing I could think of was installing PB. Luckily I have not made any other changes, so I did a System Restore to the restore point of installing PB. The problem is now fixed. I have not tried reinstalling PB to see if the problem comes back because I don't have the time to mess with it. I am posting here just too see if there is anyone else who is having this problem or knows a solution. Tag: [Q]: WMADMOD Tag: 59648
 - 24
 - Problem in EVC4 with Windows CE Standard Software Development Kit HI, I tried to build an application in EVC4 with the standard SDK for windows ce4.2. I want to build it for an ARM based device;but i couldnt find an option for that in my EVC4.The only option found is STANDARDSDK_420 Emulator. Can anybody suggest a solution for building my application for ARM processor(using the standard SDK). Tag: [Q]: WMADMOD Tag: 59643
 - 25
 - USB Enumeration fails We are using Win CE 4.2 .net and a OMAP 1610 SAMPLE (H2 with and expansion card) plattform. When we attatch the USB cable to the Win XP host PC, the enumeration of the USB Port fails. What I am trying to figure out, is if this is a base OS configuration problem or a BSP problem. From the log when CE boots these errors are reported. 7018 PID:e5db8f66 TID:e5db8bc6 ERROR: e:\wce_bsp\platform\omap\drivers\usbo\init.cpp line 399: 7019 PID:e5db8f66 TID:e5db8bc6 OTG: ERROR holding in reset. 9104 PID:e5db8f66 TID:e5db8bc6 ERROR: e:\wce_bsp\platform\omap\drivers\usbc\w2fc\usb_ser.cpp line 501: 9105 PID:e5db8f66 TID:e5db8bc6 OTG: ERROR holding in reset. The exact code where the error message is printed is this: init.cpp ....... VOID InitOTGController(POTG_REGISTERS pOTGRegs) { // Reset the OTG first pOTGRegs->ulSYSCON_1 |= MASK_SOFT_RESET; // Wait until reset is done DWORD dwCount = 0; while (!(pOTGRegs->ulSYSCON_1&MASK_RESET_DONE)) { if (dwCount++ > 100) { // Break out dead lock, something is wrong. ERRORMSG (TRUE, (TEXT("OTG: ERROR holding in reset.\n"))); return; } Sleep (1); } -> more code, but not executed ........ usb_ser.cpp ........ VOID InitOTGController() { POTG_REGISTERS pOTGRegs; DWORD dwCount = 0; pOTGRegs = (POTG_REGISTERS)MapIOSpace ( (void *)(PHYS_TO_UNCACHED_KERN(USB_OTG_BASE)), sizeof(OTG_REGISTERS), (PAGE_READWRITE | PAGE_NOCACHE)); if (!pOTGRegs) { ERRORMSG(1, (TEXT("OTG: failed to map OTG registers.\r\n"))); return; } // If OTG has been initialized, don't do it again. if ((pOTGRegs->ulSYSCON_2 & MASK_OTG_EN) || (pOTGRegs->ulSYSCON_2 & MASK_HMC_MODE)) { return; } // If OTG has been initialized, don't do it again. if (pOTGRegs->ulSYSCON_1 & (MASK_USB0_TRX_MODE |MASK_USB2_TRX_MODE|MASK_USB2_TRX_MODE)) { return; } // Reset the OTG first pOTGRegs->ulSYSCON_1 |= MASK_SOFT_RESET; // Wait until reset is done while (!(pOTGRegs->ulSYSCON_1&MASK_RESET_DONE)) { if (dwCount++ > 100) { // Break out dead lock, something is wrong. ERRORMSG (TRUE, (TEXT("OTG: ERROR holding in reset.\n"))); return; } Sleep (1); } -> more code, but not executed. Tag: [Q]: WMADMOD Tag: 59642

Hi all,

I came across this exception while playing .WMV file under Internet
appliance config WinCE 4.2.

First-chance exception in WMADMOD.DLL
[0xC0000005: Access Violation]

d:\codecdsp\multimedia\dmd\codecdsp\scrunch\wmaudio\integer\common\fft.c

0x876b9400: Exception 002 Thread=876b9400 Proc=07cc934a
0x876b9400: AKY=00000081 PC=01beb5c0 RA=01beb040 BVA=0014f2e0
0x876b9400: Process 'ceplayer.exe'

Can anybody explain this ?

regards
Ryan

Top