VirtualPC 7 - CEPC

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - error when doing clean sysgen of new CEPC platform I am trying to create a custom runtime image for a CEPC platform but when I do a build and sysgen for CEPC: x86_Release, I get the following error: NMAKE : fatal error U1077: 'renumbericonids' : return code '0xfffffffd' I've tried doing a sysgen, build and sysgen, debug, retail, from PB, from the commandline, etc. Nothing works The platform builds just fine when doing a sysgen for the Emulator though. Any suggestions? Cheers, Marty Neal Qualnetics Co. Copying localized RESs for 0409 to C:\WINCE500\PBWorkspaces\CEPC_FULL \WINCE500\CEPC_x86\cesysgen\oak\target\x86\retail\0409 mkdir C:\WINCE500\PBWorkspaces\CEPC_FULL\WINCE500\CEPC_x86\cesysgen \oak\target\x86\retail\0409 > nul 2>&1 xcopy /I C:\WINCE500\public\shell\oak\lib\x86\retail\0409\*.res C: \WINCE500\PBWorkspaces\CEPC_FULL\WINCE500\CEPC_x86\cesysgen\oak\target \x86\retail\0409 > nul nmake /NOLOGO ceshell makefile.def: Invoked with predefined settings: TARGETNAME: dummy TARGETTYPE: dummy RELEASETYPE: TARGETLIBS: SOURCELIBS: makefile.def: BUILDROOT is C:\WINCE500\public\shell\cesysgen 0 Please add _COMMONPUBROOT and __PROJROOT to your tree's cesysgen \sources file. Directory: C:\WINCE500\PUBLIC\SHELL\CESYSGEN TARGETNAME: dummy RELEASETYPE is not defined. Using DEFAULT. makefile.def: Including C:\WINCE500\public\common\oak\misc \sources.ReleaseType_DEFAULT del /q C:\WINCE500\PBWorkspaces\CEPC_FULL\WINCE500\CEPC_x86\cesysgen \oak\target\x86\retail\0409\ceshell.res renumbericonids %CESHELL_RESOURCES% C:\WINCE500\public\shell\oak\lib\x86\retail\0409\ceshapi_vgal.res: warning RenumberIconIds: Ignoring unsupported res type (BOOL) at offset(0x32) RenumberIconIds: Found 1 Warnings C:\WINCE500\public\shell\oak\lib\x86\retail\0409\ceshapi_vgal.res: warning RenumberIconIds: Ignoring unsupported res type (BOOL) at offset(0x32) RenumberIconIds: Found 1 Warnings res2res %CESHELL_RESOURCES% -fo C:\WINCE500\PBWorkspaces\CEPC_FULL \WINCE500\CEPC_x86\cesysgen\oak\target\x86\retail\0409\ceshell.res Res2Res for Windows CE (Debug) (Built on Jun 11 2004 10:49:59) Copyright (C) Microsoft Corp. 1991-2004. All rights reserved. Res2Res: Ignoring "dummy" Res2Res: Using C:\WINCE500\public\common\oak\Bin\i386\R2RDUMMY.DLL for temp exe Res2Res: Using resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\ceshapi_vgal.res. Res2Res: Adding resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\ceshapi_vgal.res to C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp \R2R1B45.tmp. Res2Res: Using resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\ceshapi_base.res. Res2Res: Adding resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\ceshapi_base.res to C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp \R2R1B45.tmp. Res2Res: Using resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\ceshui_vgal.res. Res2Res: Adding resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\ceshui_vgal.res to C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp \R2R1B45.tmp. Res2Res: Using resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\ceshui_base.res. Res2Res: Adding resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\ceshui_base.res to C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp \R2R1B45.tmp. Res2Res: Building C:\WINCE500\PBWorkspaces\CEPC_FULL \WINCE500\CEPC_x86\cesysgen\oak\target\x86\retail\0409\ceshell.res from temp file C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\R2R1B45.tmp. Set SizeOfResources: 0001f000 Set VirtualSize: 0001ecf8 SizeOfResources: 0001f000 SizeOfResources: 0001f000 SizeOfResources: 0001f000 res2res C:\WINCE500\public\shell\oak\lib\x86\retail \0409\explorer_vgal.res C:\WINCE500\public\shell\oak\lib\x86\retail \0409\explorerbase.res -fo C:\WINCE500\PBWorkspaces\CEPC_FULL \WINCE500\CEPC_x86\cesysgen\oak\target\x86\retail\0409\explorer.res Res2Res for Windows CE (Debug) (Built on Jun 11 2004 10:49:59) Copyright (C) Microsoft Corp. 1991-2004. All rights reserved. Res2Res: Using C:\WINCE500\public\common\oak\Bin\i386\R2RDUMMY.DLL for temp exe Res2Res: Using resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\explorer_vgal.res. Res2Res: Adding resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\explorer_vgal.res to C: \DOCUME~1\ADMINI~1\LOCALS~1\Temp\R2R1B4A.tmp. Res2Res: Using resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\explorerbase.res. Res2Res: Adding resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\explorerbase.res to C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp \R2R1B4A.tmp. Res2Res: Building C:\WINCE500\PBWorkspaces\CEPC_FULL \WINCE500\CEPC_x86\cesysgen\oak\target\x86\retail\0409\explorer.res from temp file C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\R2R1B4A.tmp. Set SizeOfResources: 0001f000 Set VirtualSize: 0001ef00 SizeOfResources: 0001f000 SizeOfResources: 0001f000 SizeOfResources: 0001f000 res2res C:\WINCE500\public\shell\oak\lib\x86\retail \0409\explorer_vgal.res C:\WINCE500\public\shell\oak\lib\x86\retail \0409\explorerbase.res -fo C:\WINCE500\PBWorkspaces\CEPC_FULL \WINCE500\CEPC_x86\cesysgen\oak\target\x86\retail\0409\explorer.res Res2Res for Windows CE (Debug) (Built on Jun 11 2004 10:49:59) Copyright (C) Microsoft Corp. 1991-2004. All rights reserved. Res2Res: Using C:\WINCE500\public\common\oak\Bin\i386\R2RDUMMY.DLL for temp exe Res2Res: Using resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\explorer_vgal.res. Res2Res: Adding resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\explorer_vgal.res to C: \DOCUME~1\ADMINI~1\LOCALS~1\Temp\R2R1B4D.tmp. Res2Res: Using resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\explorerbase.res. Res2Res: Adding resources from C:\WINCE500\public\shell\oak\lib \x86\retail\0409\explorerbase.res to C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp \R2R1B4D.tmp. Res2Res: Building C:\WINCE500\PBWorkspaces\CEPC_FULL \WINCE500\CEPC_x86\cesysgen\oak\target\x86\retail\0409\explorer.res from temp file C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\R2R1B4D.tmp. Set SizeOfResources: 0001f000 Set VirtualSize: 0001ef00 SizeOfResources: 0001f000 SizeOfResources: 0001f000 SizeOfResources: 0001f000 Copying localized RESs for 0404 to C:\WINCE500\PBWorkspaces\CEPC_FULL \WINCE500\CEPC_x86\cesysgen\oak\target\x86\retail\0404 mkdir C:\WINCE500\PBWorkspaces\CEPC_FULL\WINCE500\CEPC_x86\cesysgen \oak\target\x86\retail\0404 > nul 2>&1 xcopy /I C:\WINCE500\public\shell\oak\lib\x86\retail\0404\*.res C: \WINCE500\PBWorkspaces\CEPC_FULL\WINCE500\CEPC_x86\cesysgen\oak\target \x86\retail\0404 > nul nmake /NOLOGO ceshell makefile.def: Invoked with predefined settings: TARGETNAME: dummy TARGETTYPE: dummy RELEASETYPE: TARGETLIBS: SOURCELIBS: makefile.def: BUILDROOT is C:\WINCE500\public\shell\cesysgen 0 Please add _COMMONPUBROOT and __PROJROOT to your tree's cesysgen \sources file. Directory: C:\WINCE500\PUBLIC\SHELL\CESYSGEN TARGETNAME: dummy RELEASETYPE is not defined. Using DEFAULT. makefile.def: Including C:\WINCE500\public\common\oak\misc \sources.ReleaseType_DEFAULT del /q C:\WINCE500\PBWorkspaces\CEPC_FULL\WINCE500\CEPC_x86\cesysgen \oak\target\x86\retail\0404\ceshell.res Could Not Find C:\WINCE500\PBWorkspaces\CEPC_FULL \WINCE500\CEPC_x86\cesysgen\oak\target\x86\retail\0404\ceshell.res renumbericonids %CESHELL_RESOURCES% C:\WINCE500\public\shell\oak\lib\x86\retail\0404\ceshapi_vgal.res: warning RenumberIconIds: Ignoring unsupported res type (BOOL) at offset(0x32) C:\WINCE500\public\shell\oak\lib\x86\retail\0404\ceshapi_vgal.res: error RenumberIconIds: Cannot open output file C:\WINCE500\public\shell\oak\lib\x86\retail\0404\ceshapi_vgal.res: warning RenumberIconIds: Ignoring unsupported res type (BOOL) at offset(0x32) C:\WINCE500\public\shell\oak\lib\x86\retail\0404\ceshapi_vgal.res: error RenumberIconIds: Cannot open output file NMAKE : fatal error U1077: 'renumbericonids' : return code '0xfffffffd' Stop. NMAKE : fatal error U1077: 'C:\WINCE500\sdk\bin\i386\nmake.exe' : return code '0x2' Stop. Tag: VirtualPC 7 - CEPC Tag: 98974
  - 2
    - Newbee to PB (CEDDK question) Hi Guys, Presently I am working on Windows Mobile 5.0 TI OMAP 850 platform. 1) I would like to know how to generate the CEDDK.dll out of an exisiting BSP, which has only the CEDDK.h header file and no .lib file? 2) Is it possible to use FSample BSP to create this CEDDK.dll and then use it on other OEMs TI OMAP 850 platforms? Thanks, -- SAR, Windows CE/Mobile Developer. Tag: VirtualPC 7 - CEPC Tag: 98973
  - 3
    - parameter range checking I need to do parameter range checking in and to check the return value of functions.I have not done it before.so please guide me. Tag: VirtualPC 7 - CEPC Tag: 98961
  - 4
    - makeimg: FATAL ERROR:-( - help me Hi, In my project i'm using MIPSII BSP & added to platform builder's Add catalog item's third party BSP section. OS design templates are all created and even i had Build & Sysgen the projects. I got 0 - errors & 0 - warnings. But when i try to "Make Image" from Build OS menu, i'm getting the following errors. makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec). makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec). Please help me out on how to fix this bug & to get error free images at "Make Image". Expecting your reply as early as possible. regards, Pradeep Kumar Tag: VirtualPC 7 - CEPC Tag: 98960
  - 5
    - Problem faced while porting BSP to WinCE 6.0 Hi All, I am porting a Samsung BSP from Windows CE 5.0 to Windows CE 6.0. I followed all the steps mentioned in MSDN to separate the Kernel, OAL and KITL. While building Oal.exe the following errors were displayed: BUILD: [00:0000000725:PROGC ] Building LINK Pass in C: \WINCE600\PLATFORM\SMDK2442\Src\Oal\OalExe\ directory. BUILD: [01:0000000738:PROGC ] Linking C:\WINCE600\platform \SMDK2442\target\ARMV4I\debug\oal.exe BUILD: [01:0000000755:ERRORE] oal_rtc_s3c2440a.lib(rtc.obj) : error LNK2001: unresolved external symbol g_oalLogMask BUILD: [01:0000000756:ERRORE] oal_ioctl_s3c2440a.lib(reboot.obj) : error LNK2001: unresolved external symbol g_oalLogMask BUILD: [01:0000000763:ERRORE] oal.lib(init.obj) : error LNK2001: unresolved external symbol CEProcessorType BUILD: [01:0000000764:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol pQueryPerformanceCounter BUILD: [01:0000000765:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol pQueryPerformanceFrequency Do I have to include any additional library files in my BSP sources? Has anyone encountered a similar error? Thanks in Advance. Treadstone Tag: VirtualPC 7 - CEPC Tag: 98959
  - 6
    - WinCE 4.2 2K Nand Flash got cut/paste problem Hi all, I follow the following email to modify the fsd and fmd driver in WinCE 4.2 two years ago. It works well until two weeks ago. NAND driver and FAT filesystem http://groups.google.com/group/microsoft.public.windowsce.platbuilder... Our customer found one bug. I can repeat the bug by following the below steps. 1. Prepare 70 files in the nand flash folder, size from 1 byte to 100KByte. 2. Cut/paste them to the RAM file system i.e \temp folder. 3. Compare the files with the original files and found that the data become all 0x00 in some of them. I tried to put the original files in the RAM file system i.e. \temp folder and cut/paste them to nand flash folder. The files are all ok. I tried to put the original files in the Nand Flash folder and cut/ paste them to another nand flash folder. The files are ok. I tried to put the original files in the RAM file system i.e. \temp folder and cut/paste them to another RAM files sytem folder i.e. \program files. The files are ok. If the nand flash is 512 page nand flash, it don't have the above bug. So you can only find the bug in 2K page Nand Flash. If the OS is WinCE 5.0, don't have this bug. The summary is that the bug only happened on WinCE 4.2 and 2Kpage Nand Flash. The bug is only happened when cut/paste from 2K sector size FAT file system to 512 sector size FAT file system. Any suggestion? Thanks and Regards Hong Feng Tag: VirtualPC 7 - CEPC Tag: 98958
  - 7
    - How can I hide a partition of DOM card(CE5.0) Execuse me, I created two partitions on my DOM card, and my CE5.0 system image uses Hive-based registry, the registry files are placed in 1st partition automatically when windows CE start.Now, I want to hide only 1st partition in explorer: [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles] "AutoMount" = dword:1 "AutoPart" = dword:0 "AutoFormat" = dword:0 "MountFlags" = dword:2 "DefaultFileSystem" = "" "PartitionDriverName" = "mspartl" "Folder" = "å·²è£?å?¥ç??å?·" "ActivityEvent" = "PowerManager/ActivityTimer/SystemActivity" [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\HDProfile] "MountHidden"=dword:1 ; // added by ZHIZI on 2007-04-10 16:19 "Name" = "IDE Hard Disk Drive" "Folder" = "ç£?ç??" "Folder" = "å·²è£?å?¥ç??å?·" "MountAsBootable" = dword:1 Howewer, the 2 partitions can all be seen in explorer. In Windows CE 5.0 MSDN, I found that "MountHidden" Specifies a hidden file system, set to 1 to enable. But I don't know why it doesn't take effect. Help me, please. Tag: VirtualPC 7 - CEPC Tag: 98957
  - 8
    - Data abort Exception after downloading OS Hi, I am working with Wince5.0 for s3c2440 evaluation board. I am getting the following exception after downloading OS with my own eboot. I downloaded using USB. Windows CE Kernel for ARM (Thumb Enabled) Built on Jun 24 2004 at 18:25:00 ProcessorType=0920 Revision=0 sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 82205f84 www.clabsys.com FCLK : 390000000, HCLK : 130000000, PCLK : 65000000 DCache: 8 sets, 64 ways, 32 line size, 16384 size ICache: 8 sets, 64 ways, 32 line size, 16384 size Sp=ffffc7cc OEMIoControl: Unsupported Code 0x10100b4 - device 0x0101 func 45 OEMIoControl: Unsupported Code 0x101008c - device 0x0101 func 35 OEMIoControl: Unsupported Code 0x10100d0 - device 0x0101 func 52 OEMIoControl: Unsupported Code 0x10100f8 - device 0x0101 func 62 DeviceFolder::LoadDevice!Enumerate Found deprecated load instructions at (Drivers\BuiltIn\AFD). Driver cannot be unloaded. DeviceFolder::LoadDevice!Enumerate Found deprecated load instructions at (Drivers\BuiltIn\PPP). Driver cannot be unloaded. OEMIoControl: Unsupported Code 0x10100fc - device 0x0101 func 63 Data Abort: Thread=83df7044 Proc=81526540 '' AKY=00000013 PC=802243b4(NK.EXE+0x000243b4) RA=0000003c(??? +0x0000003c) BVA=2af9fe98 FSR=00000005. Kindly help Warm regards Kirthika Tag: VirtualPC 7 - CEPC Tag: 98953
  - 9
    - StartOneDriver RegisterDevice(... )failed here are some debug outputs from serial while my board is booting, could anyone help me to check why they are failed to be registered? Am I missing some feature what should be add to the platform? I'm using S3C2440 ..... 0x8fe9b2e4: DEVICE!ActivateDeviceEx(Drivers\BuiltIn\Audio) entered 0x8fe9b2e4: DEVICE!StartOneDriver RegisterDevice(WAV, 1, wavedev.dll, 0x602ee54) failed 0x8fe9b2e4: DEVICE!ActivateDeviceEx(Drivers\BuiltIn\NDIS) entered .... 0x8fe9b2e4: DEVICE!ActivateDeviceEx(Drivers\BuiltIn\PBUT2440) entered 0x8fe9b2e4: DEVICE!StartOneDriver RegisterDevice(DSK, 2, pwrbtn_pcf.dll, 0x602ee54) failed .... Tag: VirtualPC 7 - CEPC Tag: 98950
  - 10
    - Poor performance of diskcache.dll? Hi all, My company makes a GPS platform based on WinCE 5.0 S3C2440. It has 64MB of NAND flash, which is more than enough to fit the mapping application. However, the map database is fairly large and requires a 1GB SD card. No problem. However, when the application runs, it slows to a crawl due to the excessively fragmented nature of the file accesses it implements. So, I decided to more carefully examine the caching possibilities of WinCE 5.0. The FATFS caching is handled by PRIVATE\WINCEOS\COREOS\STORAGE\DISKCACHE. After much tracing and message printing I noticed that diskcache's algorithm doesn't have any support for pre-fetching (reading some sectors in advance); so, for each 1-sector request comming from the upper layers, diskcache reads only 1 sector from the disk, if there is a cache miss, and stores only that sector in the buffers; no further read-ahead is done. I cloned and tweaked diskcache to implement a read-ahead of 64 sectors (minimum) and now the application starts beautifully with thousands of cache hits; it is about 10 times faster and actually usable. Am I missing something? Is there any simple configuration that enables the read-ahead feature? Here are my FATFS customized registry entries: [HKEY_LOCAL_MACHINE\System\StorageManager\FATFS] "FriendlyName"="FAT FileSystem" "Flags"=dword:00000064 "Util"="fatutil.dll" "CacheDll"="diskcache.dll" "BufferSize"=dword:40 "FatCacheSize"=dword:200 "DataCacheSize"=dword:800 "CacheSize"=dword:800 "DLL"="fatfsd.dll" "EnableCache"=dword:1 "EnableFatCacheWarm"=dword:0 "EnableDataCacheWarm"=dword:0 "EnableWriteBack"=dword:1 "Paging"=dword:1 [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash\FATFS] "FriendlyName"="FAT FileSystem" "Dll"="fatfsd.dll" "Flags"=dword:00280014 "Paging"=dword:1 "CacheSize"=dword:800 "EnableCacheWarm"=dword:0 "EnableCache"=dword:1 "MountFlags"=dword:2 "MountAsROM"=dword:0 "BufferSize"=dword:40 "FatCacheSize"=dword:800 "DataCacheSize"=dword:800 "EnableCache"=dword:1 Besides, if I decide to use my modified diskcache.dll, am I allowed to do that, since this is derived from the PRIVATE tree? Thanks! -H Tag: VirtualPC 7 - CEPC Tag: 98948
  - 11
    - SQL Server 2005 Compact Edition I can't be the only one confused by SQL Server on mobile devices. I am trying to get the new SQL Server 2005 CE on my Windows CE 5.0 device. In Platform Builder I have SQL Mobile listed as a catalog item. That is what I'm using right now. It comes with .dll files that are dated for 9/2/2005 and version numbers of 3.00.5206.0. This has to be SQL Mobile 3.0. To me it looks like SQL Server 2005 CE has files dated 12/22/2006 and version numbers of 3.00.5300.0. I found this KB article on MSDN: http://support.microsoft.com/kb/918066 It says "A supported software update to resolve this issue is now available from Microsoft." Where is that update at? Are they talking about adding SQL Mobile to Platform Builder? Does anyone have any ideas? Thanks. Tag: VirtualPC 7 - CEPC Tag: 98947
  - 12
    - Graphedt For Windows CE 5.0 Hi, Can i build Graphedt.exe as part of the Windows Ce Image? If yes how can it be done? Can it be added to the image using some Sysgen variable? I figured graphedt.lib as part of WinCE 5.0.Can we use this library to build Graphedt.exe? Or is there any other approch to build graphedt.exe as i need to test my filters. Thanks and regards Ajith Tag: VirtualPC 7 - CEPC Tag: 98939
  - 13
    - Microsoft Direct Draw Hardware Abstract Layer (DDHAL) Specificatio Hello, all Although there are DDHAL reference informations in MSDN, I'd like to refer the original document. If you know where (web link) or how the original document of Microsoft Direct Draw Hardware Abstract Layer Specification can be got, please tell me. Thanks & regards. -gdj Tag: VirtualPC 7 - CEPC Tag: 98938
  - 14
    - CE 5.0 Eboot and USB Host Hi All, I have two problem. Problem 1 ======== I am trying to download CEPC through an Ethernet connection (Eboot). But my NIC driver initializations are failing. I checked the same with two PC and the results are same. I have the following network cards. But these cards are not added in kitldrv.c file. so, 1) PC1 NIC card, Vendor ID 0x14E4, Dev ID 0x170C ( Broadcom made ) 2) PC2 NIC card, Vendor ID 0x8086, Dev ID 0x27DC ( INTEL Made ) Does any one know any patch or latest version which supports NIC from these Manufactures?. I am using WIN CE 5.0 Problem 2 ======= In MS-DOS mode, I loaded CEPC using loadcepc. I enabled the USB UHCI/ OCHI and EHCI support in the build and the registry entries are added. Also from the boot console, I could see UHCD logs like "UHCD: Installed ISR handler" etc. 1) But after booting, when I plug a USB device, there is no hardware pop-up ( or any kind of notification) for driver installation ( I added PnP Notifications during build, but don't know whether this is applicable) 2) How do I view the drivers and devices in a standalone CEPC. I mean "Device Manager" kind of stuff in CEPC. 3) What kind of diagnostic tools are used in CE for driver development. I mean outside remote PB tools, as I am not able to connect the PB to target CEPC. Thanks in advance Suja Tag: VirtualPC 7 - CEPC Tag: 98937
  - 15
    - Image Binary Format I don't know how to explain the image holes in .bin or RAMIMAGE Please check out this record example Image Start = 0x00220000, length = 0x00B52D90 Record [ 0] : Start = 0x00220000, Length = 0x00000010, Chksum = 0x00000829 Record [ 1] : Start = 0x00220040, Length = 0x00000008, Chksum = 0x00000314 Record [ 2] : Start = 0x00221000, Length = 0x0003EFFC, Chksum = 0x019B93D5 Record [ 3] : Start = 0x00261000, Length = 0x000003A0, Chksum = 0x00014AD3 There are many unused spaces in RAM. For example, 0x220020~ 0x220040 0x220048~0x221000 Why do we leave these spaces? -- Jacky Ko Microsoft MVP for Windows Embedded www.advantech.com Advantech Co., Ltd Tag: VirtualPC 7 - CEPC Tag: 98935
  - 16
    - ActivateDeviceEx() fails... Hi all, these days I have developed my first "Device-Driver" for CE-based devices. The "Device-Driver" is actually a quite simple DLL that exposes a stream-interface to clients. Clients can act upon the driver via CreateFile(), ReadFile(), WriteFile and DeviceIoControl(). The drivers purpose is simply to write Debug-Messages to a file. I have thoroughly tested the DLL-Entrypoints with a client in user-mode. I'm now tryin to load the driver via ActivateDeviceEx(). I have created a registry-key "Drivers\RZS_LogDrv" under HKEY_LOCAL_MACHINE which has the following values: Value-Type REG_SZ, Value-Name: DLL, Value "\Program Files\RZS_LogDrv\logdrv.dll"; (this is the path to my DLL"). Value-Type REG_SZ, Value-Name: Prefix, Value "RZS"; (this is the prefix used by the exported functions e.g. RZS_Init()). Value-Type REG_DWORD, Value-Name: Index, Value "0"; (this is the index used to form the device-name as in "RZS0:"). Value-Type REG_SZ, Value-Name: IClass, Value "{A4E7EDDA-E575-4252-9D6B-4195D48BB865}"; (this is the (predefined) GUID for the stream-driver interface). My call to ActivateDeviceEx looks like this: const TCHAR* pszRegPath = _T("Drivers\\RZS_LogDrv"); HANDLE hDevice = ActivateDeviceEx(pszRegPath, NULL, 0, NULL); The return value is always NULL and GetLastError() reports 1610 (ERROR_BAD_CONFIGURATION)! What did I wrong? Can somebody help me? Thanks in advance and best regards Reiner Tag: VirtualPC 7 - CEPC Tag: 98930
  - 17
    - [WinCE 5.0] How-to disable idle modes... Hi everybody, I use PB 5.0 on a Phycore PXA-270 board with Adeneo's BSP... I try to disable all idle modes in my image because the system must stay awake every time. To do that, in "project.reg" I wrote : [-HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\Timeouts] [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power] "DisableGwesPowerOff"=dword:1 But after 15', my system go nonetheless into 'coma mode'... I verified that the registry contain the informations above. Do I forget something else ? Many thanks for your help. Olivier Tag: VirtualPC 7 - CEPC Tag: 98913
  - 18
    - Loading a driver from other driver Part A: I have two stream interafce drivers driver_A and driver_B. Driver_B is dependent on driver_A and i want to load driver_B from driver_A. How can I achieve this ? Should I call LoadLibrary or ActivateDevice() from driver_A to load driver_B ? Is the XXX_Init function of driver_A the right place to call for loading driver_B? One more problem is driver_B once it gets loaded it will issue ioctls to driver_A? What is the best approach for this scenario? Part B: Driver_A will receive data from hardware and it needs to pass this data to driver_B Which is the best form of communication between drivers - events, message_queues,etc, considering performance as very critical ? Can I have more stream interface drivers over driver_B to form a hirearchial layering of drivers ? Tag: VirtualPC 7 - CEPC Tag: 98911
  - 19
    - How to do Priority Assignment? Hi friends, I want to make serial communication(RS232) the most important task of CPU. I mean, any task other than serial communication(be it usb, printer, display, keyboard, mouse etc) should be done only after serial communication is done. What steps can I do to realize this? Any comment is greatly appreciated. Thanks.. Tag: VirtualPC 7 - CEPC Tag: 98910
  - 20
    - location of CE's vector table Would someone kindly ask my following question ? Usually MPUs support low end (0x0000_0000) vector table location, but processors like some ARM processors support high end (0xFFFF_0000) vector table location as well. It was said that the high end vector table location is added for the requirement of OSs like CE. Must CE require this ? If a MPU core only supports low end vector table location, what would happen to run CE on it: CE can't work or there are some extra processing needed to do in CE so reducing its performance, etc. Thanks. Tag: VirtualPC 7 - CEPC Tag: 98909
  - 21
    - sysgen error Hi there, I installed the wince5.0 and made a new project and then am trying to sysgen but I met an error below. please let me know what's the problem. Thanks in advance. Patrick ---------------------------from build.log--------------- Starting sysgen phase for project ( common ) Found localized resources for Languages ( 0404 0407 040C 0410 0411 0412 0413 0416 041D 0804 0C0A) Microsoft (R) Program Maintenance Utility Version Test Version Copyright (C) Microsoft Corporation. All rights reserved. NMAKE : fatal error U1065: invalid option '-' Windows CE Version (Release) (Built on Mar 1 2004 21:46:39) Stop. Microsoft (R) Program Maintenance Utility Version Test Version Copyright (C) Microsoft Corporation. All rights reserved. NMAKE : fatal error U1065: invalid option '-' Windows CE Version (Release) (Built on Mar 1 2004 21:46:39) Stop. Microsoft (R) Program Maintenance Utility Version Test Version Copyright (C) Microsoft Corporation. All rights reserved. NMAKE : fatal error U1065: invalid option '-' Windows CE Version (Release) (Built on Mar 1 2004 21:46:39) Stop. ---------------------------- Tag: VirtualPC 7 - CEPC Tag: 98908
  - 22
    - Problem launching Device Emulator Hi All, I have installed wince 6.0 and I am trying to build and download the run time image for device emulator. I have followed the steps provided by msdn doc. to build and download the image for device emulator. I have successfully built the image, when I download the image after setting connectivity options as per the doc I get the following message in the dialog box. Failed to open VPC network driver. verify that the driver is installed and it specifies a link to download. Followed by this I get an exception in K.COREDLL.DLL(0xC000001C:Invalid System Service) Could anyone please help me with this. Thanks & Regards, Chitra Tag: VirtualPC 7 - CEPC Tag: 98905
  - 23
    - Problem in displaying OS image in LCD Hi, I am working in wince5.0 for ln2440sbc.I added support in Eboot for downloading nk.nb0 through USB I downloaded Nk.nb0 through USB. I was able to get these messages but i didn't see any display in LCD of my OS image. For example files i was able to get images in LCD. ProcessorType=0920 Revision=0 sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 82205f84 www.clabsys.com FCLK : 390000000, HCLK : 130000000, PCLK : 65000000 DCache: 8 sets, 64 ways, 32 line size, 16384 size ICache: 8 sets, 64 ways, 32 line size, 16384 size Sp=ffffc7cc OEMIoControl: Unsupported Code 0x10100b4 - device 0x0101 func 45 OEMIoControl: Unsupported Code 0x101008c - device 0x0101 func 35 OEMIoControl: Unsupported Code 0x10100d0 - device 0x0101 func 52 OEMIoControl: Unsupported Code 0x10100f8 - device 0x0101 func 62 DeviceFolder::LoadDevice!Enumerate Found deprecated load instructions at (Drivers\BuiltIn\AFD). Driver cannot be unloaded. DeviceFolder::LoadDevice!Enumerate Found deprecated load instructions at (Drivers\BuiltIn\PPP). Driver cannot be unloaded. OEMIoControl: Unsupported Code 0x10100fc - device 0x0101 func 63 MSIM: IM_ReadRegistry read KB 5 Explorer(V2.0) taskbar thread started. NDISPWR:: Found adapter [CS89001] Any help will be useful for me. Regards Kirthika Tag: VirtualPC 7 - CEPC Tag: 98904
  - 24
    - where is excetion vectors table placed at sdram ? Dear all, I know the exception vectors table is located at 0xffff0000 in wince. but 0xffff0000 is not mapped at sdram space(0x80000000-0xc0000000), it means vectors table is not located at sdram space? I'm confused about this, anyone can help me ? Cheers. Tag: VirtualPC 7 - CEPC Tag: 98903
  - 25
    - Show "Chinese Font" in English OS image? Hi all: I build an English OS(WinCE50) image, and see the Chinese characters look like "=E2=96=A1=E2=96=A1=E2=96=A1"... The Chinese can't be shown correctly. Or I need to build a Chinese OS image??? But the OS image size is large ! Show "Chinese Font" in English OS image is possible? Please give me some suggestion or reference documents, Thanks a lot. Tag: VirtualPC 7 - CEPC Tag: 98900
- Next
  - 1
    - Why GPIO1 cannot wake up pxa270? I use GPIO1 to wake up PXA270 from sleep mode.And GPIO0 is connected to CS8900A's INT pin.When getting into sleep mode,I cut off the power supply to cs8900a.So GPIO0 is pulled to low.When I push the key to make a falling edge to GPIO1.PWR_EN is enabled,but no program execute. If I do not cut off the power supply to cs8900a(GPIO0 is not pulled down).System is successfully waked up. Why?Who can help me? Tag: VirtualPC 7 - CEPC Tag: 98898
  - 2
    - problem with display driver Hey i'm using the display driver for my NEC display(vrc4171). I get the driver from windows CE 3.0 and i want use it for windows CE 5.0. Now i've implement the driver but i get one problem. In the background of my display i get a lot vertical lines. i'm using 8 BPP and did already some test like writing a value directly to the framebuffer and here there's no problem. What can be the problem? Could it be a difference between Widows CE 3.0 and Windows CE 5.0 Tom Tag: VirtualPC 7 - CEPC Tag: 98897
  - 3
    - Suspend/resume - exception on resume Hi all, I have posted this issue before ("Suspend/resume causes system halt" on 2/26/07) but now I have slightly better insight about what is happening, so I open it again here. It seems to be related to the presnce of an SD card (sdmemory.dll). I am using the debug version of kern.exe. If I suspend/resume rapidly with an SD card present, after a while I get the following error message: 0x8dfca400: NK Kernel: DEBUGCHK failed in file d:\macallan\private\winceos\coreos\nk\kernel\schedule.c at line 5065 0x8dfca400: DEBUG_BREAK @80062e58 MD=1f Ignored. NK Kernel: DEBUGCHK failed in file d:\macallan\private\winceos\coreos\nk\kernel\schedule.c at line 4931 RaiseException: Thread=8dfca400 Proc=8c226820 'device.exe' AKY=00000007 PC=03f9138c(coredll.dll+0x0002138c) RA=80061900(NK.EXE+0x00060900) BVA=00000000 FSR=00000002 Fixing this seems to be beyond my possibilities (bug in kernel?). I am using WinCE 5.0 with updates until February 2007. BSP is the SMDK2440A. Any idea is very welcome. Thanks! -H Tag: VirtualPC 7 - CEPC Tag: 98891
  - 4
    - Hard Disk vs USB drive I have the USB mass storage function working and my USB drive mounts and unmounts as expected. I have the following registry keys: [HKEY_LOCAL_MACHINE\Drivers\USB\LoadClients\Default\Default\8\Mass_Storage_Class] "DLL"="USBMSC.DLL" "Prefix"="DSK" [HKEY_LOCAL_MACHINE\Drivers\USB\ClientDrivers\Mass_Storage_Class] "DLL"="USBMSC.DLL" "Prefix"="DSK" [HKEY_LOCAL_MACHINE\Drivers\USB\ClientDrivers\Mass_Storage_Class\2] "DLL"="USBDISK6.DLL" "Prefix"="DSK" "FSD"="UDFS.DLL" "Folder"="USB Disk" "IOCTL"=dword:4 [HKEY_LOCAL_MACHINE\Drivers\USB\ClientDrivers\Mass_Storage_Class\6] "DLL"="USBDISK6.DLL" "Prefix"="DSK" "FSD"="FATFS.DLL" "Folder"="USB Disk" "IOCTL"=dword:4 I would have thought the drive would show up as a "USB Disk" in file explorer but it does not. It shows up as "Hard Disk". I know this is a minor annoyance but is there a way to correct it? Tag: VirtualPC 7 - CEPC Tag: 98864
  - 5
    - A new device type for SD/MMC card winCE Hi We had developed an device, that uses a subset of SD/MMC commands, and are now in the process of writing the device driver for it in winCE 5.0. Now in the SDcardDDK there are only 4 types of devices whose functionality is ported // enum for device type typedef enum _SDCARD_DEVICE_TYPE { Device_Unknown = 0, Device_MMC = 1, Device_SD_Memory = 2, Device_SD_IO = 3, Device_SD_Combo = 4 // combo is only an intermediate device type reserved only for the bus driver }SDCARD_DEVICE_TYPE, *PSDCARD_DEVICE_TYPE; I had read in many articles and the winCE help that usually the bus driver is not touched and only the HOST controller driver or client driver are modified according to the device requirements. Now I want to add a fifth type of device, and hence change the implementation of the SD Bus driver to accommodate my specific device type. Also our device can support a large sized card. i.e 32 bit addresses wont cut it for us. Which means that the Bus driver as well as the SDCardDDK will have to be modified. Now what is confusing me is how to package the modified bus driver. The packaging of the client driver and HC driver is straightforward. But for the SD bus driver, should i create a new msi installer, which will patch the original SD bus driver code and appropriate header files, or should I create a completely new catalog item (e.g SDModifiedBus driver) with a separate source folder. I want to know if anyone has any experience of changing the bus driver according to their needs. and if yes how was it packaged in the form of a catalog item or msi Installer. Thanks Mutahir Latif Tag: VirtualPC 7 - CEPC Tag: 98862
  - 6
    - Wi-Fi Application Hi To all, I want to develope an application for Win CE 5.0 based device which uses Wi-Fi for Communication. So Can any one tell me how to configure it / Or there are any API for that. Please help me. If someone has sample for Wi-Fi like searching Access point please send me. It will be very help full for starting the project. Waiting for The Reply. Thanks, Rahul Tag: VirtualPC 7 - CEPC Tag: 98859
  - 7
    - Problem in Launching OS after downloading via USB Hi, I am working with wince5.0 for smdk2440. I provided support in Eboot for downloading Nk.nb0 through USB. I was able to download OS completely through USB using DNW But my OS didn't launch. My Launch address is 0x32200000(80200000) and my OS image starts at 0x80200000. I have a doubt whether any problem exists if my download address in DNW is same as launch address. I couldn't trace out where the problem exists. Give me some suggestions. Regards Kirthika Tag: VirtualPC 7 - CEPC Tag: 98858
  - 8
    - Problem in Launching OS via USB Hi, I am working with wince5.0 for smdk2440. I provided support in Eboot for downloading Nk.nb0 through USB. I was able to download OS completely through USB using DNW But my OS didn't launch. My Launch address is 0x32200000(80200000) and my OS image starts at 0x80200000. I have a doubt whether any problem exists if my download address in DNW is same as launch address. I couldn't trace out where the problem exists. Give me some suggestions. Regards Kirthika Tag: VirtualPC 7 - CEPC Tag: 98857
  - 9
    - No Debug messages while Using Atatic IP Hello all I am using Intel PXA27x board, which is having Mainstaone II platform. Here i am using this board to use it for winCE 6.0. As in WinCE 6.0 we have Mainstone III BSP, so in this BSP i just set one variable SDRAM_SIZE_64_MB=1 in mainstoneiii.bat file. And i am able to download the image to the board via DHCP configured eboot, and also able to debugg it. But when i disable the DHCP in the eboot menu and given the Static IP to that board, then i am not able to get any debug message in my output window of platform builder.and I'm not able to use any tool which uses Kitl and not able to debug the BSP code. I am getting this message in the hypertherminal after nk.bin was loaded into board Windows CE Kernel for ARM (Thumb Enabled) Built on Sep 6 2006 at 19:14:27 INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0xb DeviceId................. MAINSTN pArgs->flags............. 0x2D pArgs->devLoc.IfcType.... 0 pArgs->devLoc.LogicalLoc. 0x10000300 pArgs->devLoc.PhysicalLoc 0x10000300 pArgs->devLoc.Pin........ 0 pArgs->ip4address........ 0 pDevice->Name............ s pDevice->ifcType......... 0 pDevice->id.............. 0x10000300 pDevice->resource........ 0 pDevice->type............ 2 pDevice->pDriver......... 0x816B9000 LAN91Cxxx: Chip Id 9 Revision 1 KITL: *** Device Name MAINSTN30786 *** KITL: using sysintr 0x10 After this point the boards take time around 5-7 mins, and then finaly the image or boards comeup twith the image. But no degug message in the outout window. i am getting only this message in degug window PB Debugger The Kernel Debugger is waiting to connect with target. I have tried all the possible way to check what's going worng with the Static IP. But i did'nt found any thing related to that. can anybody share the soultion for this problem. Regards Anand Tag: VirtualPC 7 - CEPC Tag: 98856
  - 10
    - GIISR.DLL timestamp of module does not match timestamp of local mo Hello there, when debugging my ARM-based image, I get the warning: Loaded '{myDir}\GIISR.DLL', timestamp of module on device does not match timestamp of local module. I would like to get rid of this warning, maybe this causes some other strange problems I have at the moment. Any ideas?! Tag: VirtualPC 7 - CEPC Tag: 98855
  - 11
    - Initialized variables are not working when built using PB Hello Initialized variables are not working when built using Platform Builder for WinCE 5.0. Variables intialized at declaration for e.g. UINT32 test = 0x12345678; Variable "test" is initialized with value 0x12345678 is not working when compared with same value. When I saw the map file it is in initialized data section at say "x" address but when I saw after dumping is at "x+length of .pdata section". Can anybody help in this regard? Thanks. -- Regards Manjunath Tag: VirtualPC 7 - CEPC Tag: 98851
  - 12
    - [q] GetCursorPos() function retuns FALSE. Hi, everyone. My enviromment is Windows CE 5.0, PXA270, TouchScreen only(no mouse and no keyboard). I created project with "Mobile Handheld". GetCursorPos() function returned false, Error code is 120 - ERROR_CALL_NOT_IMPLEMENTED. Is there Any WinCE Component or library including in my project? Thanks. Tag: VirtualPC 7 - CEPC Tag: 98845
  - 13
    - QFE for Windows CE .NET 4.2 Hi, Is it possible for someone from Microsoft to organise the Knowledge Base (KB) of Windows CE .NET 4.2 known bugs and publish the new QFE to fix them. I found that many known bugs that have been written in KB in another languages are not fixed and pulished with QFE. Therefore it's very disorganize and troublesome to fix the bugs manually one by one. For example, the following Google keyword: Windows CE NET 4.2 kbbug -QFE -837392 site::support.microsoft.com returns those KB bugs that has not been fixed with QFE. Furthermore, some KBs are written in another languages which doesn't have any English translation. For example: http://support.microsoft.com/kb/885592/ja http://support.microsoft.com/kb/884748/ja Regards, Chris Tag: VirtualPC 7 - CEPC Tag: 98841
  - 14
    - USB Activesync Autoconnect Dear All: I am using PXA270 based platform, and tried to connect USB activesync sutomatically to PC, but it is not connecting. Here what I have done: The interrupt is level triggered and it is working. On detection of "Cable attach" my USBFN driver call DeviceNotification(UFN_MSG_BUS_EVENTS, UFN_ATTACH); In my PC side USB device is recognized, I checked it via Device Manager. My only problem repllog doesn't get called. If I type "repllog.exe" from run window, its work, but I like to connect it automatically. Any help or suggestion will be a great help. Thanks Tag: VirtualPC 7 - CEPC Tag: 98840
  - 15
    - disabling reverse DNS for the web server The Windows CE 5.0 web server documentation mentions the ability to disable reverse DNS: GetServerVariable (ISAPI Extensions) http://msdn2.microsoft.com/en-us/library/aa450423.aspx "REMOTE_HOST The host name of the client or agent of the client (for example, gateway, proxy or firewall) that sent the request if reverse DNS is enabled. Otherwise, this value is set to the IP address specified by REMOTE_ADDR." Unfortunately this is the only place I can find any mention of even the possibility, let alone how to do so. Where is the setting to disable reverse DNS for Windows CE (or even just the web server)? Tag: VirtualPC 7 - CEPC Tag: 98838
  - 16
    - Serial Communication Test Hi, I am running serial communication tests on Windows CE 5.0 device. While running the test as slave on port(COM2), it starts auto ras dialare and the test case is disturbing. Any idea why it is happening. I removed the SYSGEN_AUTORAS variable and found that test is stucked on that test case (test case 54). Thanks, San Tag: VirtualPC 7 - CEPC Tag: 98823
  - 17
    - Display Driver for CE 6.0 Hi, I'm sorry for posting this query in multiple groups. I'm trying to develop a DirectDraw Display driver for Windows CE 6.0. I started with building a simple GDI based display driver using the GPE class and have verified this driver functionality. I've also executed the GDI test CETK tests on this implementation. Now I'm trying to extend this driver to incorporate the DirectDraw features using the DDGPE Class and the implementing the DDHAL. The required functions are complete and is building correctly. To test I tried to use the DDEX1 sample application. I observed that this application fails to initialize the DirectDraw. On further probing I found that the function DDGPECreateSurface fails declaring the format to be un-supported. The GDI driver is using the gpe_24bpp format and the bit mask is as follows. R-Mask is 0x000000FF G-Mask is 0x0000FF00 B-Mask is 0x00FF0000 I found that the default bit-mask are different from the one being used in our driver and thus the DDGPECreateSurface is failing. Is this color format really an un-supported. Or is there something I'm missing out. Any suggestions would be of great help. Thanking you in advance. BD. Tag: VirtualPC 7 - CEPC Tag: 98820
  - 18
    - Export an ARM SDK hi my problem was already discussed once in this newsgroup: http://groups.google.com/group/microsoft.public.windowsce.platbuilder/browse_frm/thread/f972e3a4fcb6796/9b9732b710ac67c2?lnk=gst&q=export+SDK+thumb&rnum=1&hl=de#9b9732b710ac67c2 This post is quite a long time ago and I hope there has something changed. Does anybody knows how to export a SDK for an ARM based (ARM11) platform? thanks Jens Tag: VirtualPC 7 - CEPC Tag: 98819
  - 19
    - Why in SDMemory Erase functinality is commented? In SDMemory case IOCTL_DISK_DELETE_SECTORS: which calls SDMemErase() and then it calls SDMemDoErase() is commented. What is the reason behind this? Tag: VirtualPC 7 - CEPC Tag: 98818
  - 20
    - USB mass storage issue We are facing some issue on the USB mass storage, let me explain the situation: My current setup is Target: ARM9 based Board. Os : WinCE 5.0. Host : Windows XP SP 2 Issue: 1) Target is configured as USB Device mass storage. 2) an SD card is plugged on the target. 3) On the PC, the SD card contents are visible. 4) When the card is replaced, the contents of the new one are not detected. The PC screen still shows the content of the previous card only. Currently as we understand: 1) The SDI driver is not communicating with USB driver for Card insertion & removal events. 2) Any event on the USB, the PDD notifies the MDD. But we see that only USB attach, detach & reset events being supported by the MDD (looking at the MDD sources). There isn't anything events for card insertion/removal. Is MS aware about this issue? Does it come from MS USB stack or MS SD stack or from somewhere else? There is some patch to solve this issue? Tag: VirtualPC 7 - CEPC Tag: 98815
  - 21
    - How to install two identical USB modems in WinCE 5.0? I have two identical USB modems and attach to a USB host one by one. For the first modem, the driver can install successfully. For the second modem, the driver CAN'T install. What's the problem? Thanks! PS: My platform is PXA270 with WinCE 5.0 -Kemin Tag: VirtualPC 7 - CEPC Tag: 98814
  - 22
    - Problem in USB downloading from Eboot. Hi, I am downloading Nb0. from Eboot through USB.In eboot i have support for downloading via USB. Using DNW i am downloading. For snippets I referred to USB downloader firmware in Samsung web site. The problem is i was not able to download complete Nb0. Either system(PC) restarts or after downloading completely it hangs... What are the possible reasons and how can i trace it out. Regards Kirthika Tag: VirtualPC 7 - CEPC Tag: 98813
  - 23
    - fail to build csp_pxa27x from another directory I have to port a new BSP on a PXA270. I have some modifications to do in public/csp_pxa27x directory. I have thus try to copy it in another location and make some modifications in sources.cmn and sources files in order to compile sources from there. My problem is that I define some variables in sources.cmn but they seem to be changed during the build process. Typically here is how is defined a variable in sources.cmn (several other variables have the same problem) : __PROJROOT=$(_TARGETPLATROOT)\src\$(WINCEPROJ) In order to better understand whats happening I have added some trace : in sources.cmn !MESSAGE sources.cmn __PROJROOT : $(__PROJROOT) in sources !MESSAGE sources __PROJROOT : $(__PROJROOT) I build the project and then in build.log I have the folowing trace : BUILD: [01:0000000014:INFO ] sources.cmn __PROJROOT : C: \WINCE500\platform\alpilles\src\csp_pxa27x BUILD: [01:0000000023:INFO ] sources __PROJROOT : C:\WINCE500\public \csp_pxa27x The first one has the expected value. So my question is, what, or who may change that vaue between sources.cmn and sources ? Maybe I am following a wrong way, is there a simpler way to integrate my changes without overwritting public/csp_pxa27x content ? Tag: VirtualPC 7 - CEPC Tag: 98809
  - 24
    - Which function can hide a partiton in WinCE 4.2? There are two FAT32 partition on nand flash, i want to hide a partition -- Thanks ^_^ Tag: VirtualPC 7 - CEPC Tag: 98806
  - 25
    - where to set PM_PM_PDA_PDD variable? WinCE5.0 default define PM_PM_DEFAULT_PDD ,but I want to use PM_PDA_PDD.how to undefine PM_PM_DEFAULT_PDD and define PM_PM_PDA_PDD? Tag: VirtualPC 7 - CEPC Tag: 98805

Hello,

Has anyone created a CEPC 6.0 image and have it running under VirtualPC 7?
If so
how did you go about it?

Thanks.

Top