Very slow system dialogs

Hello,

I'm using Windows CE 5.0 with a SH4 (SH7760) processor. We are using the
internal LCD controller of the SH7760. So we don't have a separate hardware
acceleration. This mean the Windows CE uses the emulation libraries which
are delivered with the Platform Builder. The system works fine but some
system dialogs such as the system applet of the control panel the dialog are
shown very slow. Example. I open the system applet in the control panel. If
I change from the general tab to the device name tab then the edit controls
with the device name and the description are shown very fast. Then there is
a delay time from about 1 second. Then the static text information are
shown. Then there is a delay time again before the lines are shown on the
sreen.
Does anyone see this problem too ?
Have anyone a suggestion what causes this problem ?

Thank you for your answers in advance.

Regards,
Ruediger

Shrek
Fri Dec 10 05:01:47 CST 2004


"R.Fichter" <Ft.nospam@emtrion.de> wrote in message
news:uBzulQp3EHA.1976@TK2MSFTNGP09.phx.gbl...
> Hello,
>
> I'm using Windows CE 5.0 with a SH4 (SH7760) processor. We are using the
> internal LCD controller of the SH7760. So we don't have a separate
> hardware
> acceleration. This mean the Windows CE uses the emulation libraries which
> are delivered with the Platform Builder. The system works fine but some
> system dialogs such as the system applet of the control panel the dialog
> are
> shown very slow. Example. I open the system applet in the control panel.
> If
> I change from the general tab to the device name tab then the edit
> controls
> with the device name and the description are shown very fast. Then there
> is
> a delay time from about 1 second. Then the static text information are
> shown. Then there is a delay time again before the lines are shown on the
> sreen.
> Does anyone see this problem too ?
> Have anyone a suggestion what causes this problem ?
>
> Thank you for your answers in advance.
>
> Regards,
> Ruediger
>
>
Seeing the same thing on a MIPSII (au1100) build.

R
Mon Dec 13 02:21:39 CST 2004

Hello,

thank you for your answer. Have you investigate what causes this problem ?
If yes can you provide informations or possible a solution ?

Regards,
Ruediger

"Shrek" <Nospam> schrieb im Newsbeitrag
news:O7Pwmeq3EHA.1192@tk2msftngp13.phx.gbl...
>
> "R.Fichter" <Ft.nospam@emtrion.de> wrote in message
> news:uBzulQp3EHA.1976@TK2MSFTNGP09.phx.gbl...
> > Hello,
> >
> > I'm using Windows CE 5.0 with a SH4 (SH7760) processor. We are using the
> > internal LCD controller of the SH7760. So we don't have a separate
> > hardware
> > acceleration. This mean the Windows CE uses the emulation libraries
which
> > are delivered with the Platform Builder. The system works fine but some
> > system dialogs such as the system applet of the control panel the dialog
> > are
> > shown very slow. Example. I open the system applet in the control panel.
> > If
> > I change from the general tab to the device name tab then the edit
> > controls
> > with the device name and the description are shown very fast. Then there
> > is
> > a delay time from about 1 second. Then the static text information are
> > shown. Then there is a delay time again before the lines are shown on
the
> > sreen.
> > Does anyone see this problem too ?
> > Have anyone a suggestion what causes this problem ?
> >
> > Thank you for your answers in advance.
> >
> > Regards,
> > Ruediger
> >
> >
> Seeing the same thing on a MIPSII (au1100) build.
>
>

Shrek
Mon Dec 13 02:36:08 CST 2004

We're currently looking into it.....
But due to other (silly) problems with CE 5.0, we might move back to 4.2;
our confidence in CE 5.0 is prety low at the moment.

"R.Fichter" <Ft.nospam@emtrion.de> wrote in message
news:eAoWHzO4EHA.2016@TK2MSFTNGP15.phx.gbl...
> Hello,
>
> thank you for your answer. Have you investigate what causes this problem ?
> If yes can you provide informations or possible a solution ?
>
> Regards,
> Ruediger
>
> "Shrek" <Nospam> schrieb im Newsbeitrag
> news:O7Pwmeq3EHA.1192@tk2msftngp13.phx.gbl...
>>
>> "R.Fichter" <Ft.nospam@emtrion.de> wrote in message
>> news:uBzulQp3EHA.1976@TK2MSFTNGP09.phx.gbl...
>> > Hello,
>> >
>> > I'm using Windows CE 5.0 with a SH4 (SH7760) processor. We are using
>> > the
>> > internal LCD controller of the SH7760. So we don't have a separate
>> > hardware
>> > acceleration. This mean the Windows CE uses the emulation libraries
> which
>> > are delivered with the Platform Builder. The system works fine but
>> > some
>> > system dialogs such as the system applet of the control panel the
>> > dialog
>> > are
>> > shown very slow. Example. I open the system applet in the control
>> > panel.
>> > If
>> > I change from the general tab to the device name tab then the edit
>> > controls
>> > with the device name and the description are shown very fast. Then
>> > there
>> > is
>> > a delay time from about 1 second. Then the static text information are
>> > shown. Then there is a delay time again before the lines are shown on
> the
>> > sreen.
>> > Does anyone see this problem too ?
>> > Have anyone a suggestion what causes this problem ?
>> >
>> > Thank you for your answers in advance.
>> >
>> > Regards,
>> > Ruediger
>> >
>> >
>> Seeing the same thing on a MIPSII (au1100) build.
>>
>>
>
>