UNISCRIBE performance

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Regarding File System Filter - Calling DeviceIOControl Hello All, I need to intercept any Read/Write operations with RAM, Storage Card and HardDisk(If there is one in PocketPC, i don't really know). So I am trying to use FSDSPY Example code using Visual Studio 2005(Not Platform Builder). Registry Settings Done: =============== HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\Filters\FSDSPY Name Type Value Dll String FSDSPY.dll Order DWORD 0 I have added Log messages to the file under \\Temp Directory while any directory is created in RAM, Storage Card. But Messages gets logged only when there is operation with Storage Card. This is the way I made sure FSDSPY.dll is working fine. Questions: ======= 1. Is there a way to intercept RAM read/Write file operations? 2. By doing the above registry settings, the File System Filter is applicable for all the storage. Is this understanding correct? Now i tried to write an UI Application to Call DeviceIOControl() of FSDSPY example. void GetItWorked() { HANDLE hCommDevice = INVALID_HANDLE_VALUE; HANDLE hCommEvent = INVALID_HANDLE_VALUE; DWORD dwReturn; TCHAR Buf[128]; BOOL DevIORes = FALSE; int error; hCommDevice = CreateFile(_T("DSK1:"), // drive to open GENERIC_READ | GENERIC_WRITE, // no access to the drive FILE_SHARE_READ | FILE_SHARE_WRITE, // share mode NULL, // default security attributes CREATE_ALWAYS, // disposition FILE_ATTRIBUTE_NORMAL, // file attributes NULL); // do not copy file attributes if(hCommDevice == INVALID_HANDLE_VALUE) { error = GetLastError(); wsprintf(Buf , L"Error [%d]",error); MessageBox(NULL , Buf , L"Error" , MB_OK); } else { MessageBox(NULL , L"Success in getting the DSK1 handle!!" , L"Info" , MB_OK); } hCommEvent = CreateEvent(NULL, false, false, NULL); if( hCommEvent ) { //download event object to device driver DevIORes = DeviceIoControl( hCommDevice, 0 , (LPVOID) hCommEvent, 0, NULL, 0, &dwReturn, NULL); if( DevIORes == TRUE ) { MessageBox(NULL , L"Success in Calling DevIOCtrl!!" , L"Info" , MB_OK); } } else { error = GetLastError(); wsprintf(Buf , L"Error [%d]",error); MessageBox(NULL , Buf , L"hCommEvent Error" , MB_OK); } } Questions: ======= 3. To get the Driver handle so as to call DeviceIOControl(), i used L"DSK1", was this right, since DeviceIOControl of FSDSPY is NOT called? Thanks in advance -Srini Tag: UNISCRIBE performance Tag: 93065
  - 2
    - Connect to Device... Not Available Using VS 2005, CE 6.0 integrated Platform Builder. I'm trying to connect to my device via Ethernet, but the Tools menu item "Connect to Device..." is grayed out and unavailable. I have followed all of the steps in the article "How to: Connect to Windows CE Device Without ActiveSync" to no avail. Anybody have any suggestions? Tag: UNISCRIBE performance Tag: 93062
  - 3
    - Closing down thread after exception Hi, i have a problem. I have 2 threads in my app, the main process app and a background worker. In the background thread i have a top level try catch block. I need to know best way to clean up handles to the background thread if it causes an exception. try{ while (g_fContinue){ WaitForSingleObject(hEvent, TIMEOUT); //some code } return 0; } catch(Exception& e){ e.ErrorMsg(); return 0; } To exit the thread from the main thread i just set the g_fContinue flag and event and then clean up but if it faults on its own where do i clean up. Can i call CloseHandle(hThread) in the catch block? Tag: UNISCRIBE performance Tag: 93059
  - 4
    - GIISR, NDIS and E100BEX bad interrupt handling Hi all, E100BEX is a miniport driver given as a sample with PB 5.0. It handles Intel's 825xx Ethernet PCI chips and illustrates a few useful techniques for writing NDIS 5.1 miniport drivers. Unfortunately, there is a problem in the way E100BEX handles the interrupts. This can be seen when E100BEX is used with GIISR.DLL on a shared interrupt level. For instance, a typical Registry entry for this driver is: [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCI\Template\E100BEX] ;PCI Bus Enumeration Information "Class"=dword:02 "SubClass"=dword:00 "ProgIF"=dword:0 "VendorID"=multi_sz:"8086","8086","8086" "DeviceID"=multi_sz:"1209","1229","2449" "Dll"="NDIS.dll" "Entry"="NdisPCIBusDeviceInit" "Transceiver"=dword:3 ;Installable ISR Handler Information "IsrDll"="giisr.dll" "IsrHandler"="ISRHandler" "PortIsIO"=dword:0 "PortOffset"=dword:0 "PortSize"=dword:4 "PortMask"=dword:F000 When the 825xx interrupt fires, it is handled by PeRPISR that calls NKCallIntChain for the active level. NKCallIntChain then calls GIISR's ISRHandle, that tests active bits of the ScbStatus register of the controller against PortMask. As the result of the test is positive, ISRHandle returns a valid SysIntr for the interrupt and the matching IST in NDIS is eventually called. The IST in NDIS calls MPIsr in E100BEX, that read 2 controller registers: ScbCommandHigh to check that the interrupt is not masked at the controller level and ScbStatus, indicating what interrupt sources (Rx, Tx, etc.) are currently active. When both the interrupts are unmasked and active sources can be seen, MPIsr writes ScbCommandHigh to mask the controller interrupts and return TRUE to NDIS. NDIS then calls InterruptDone: new interrupts can occur on the same level. When E100BEX is the only possible interrupt source on this level, after having called InterruptDone, NDIS posts a DPC that ends in E100BEX MPHandleInterrupt routine. MPHandleInterrupt reads ScbStatus again and writes it back to clear the bits of the active sources. Then it processes the controller interrupts and finally writes to ScbCommandHigh to enable the controller interrupts again. When another device shares the same interrupt level and is located in the interrupt chain *after* the ISRHandler instance of E100BEX, things usually go bad. As an illustration, imagine this scenario: 1) A 825xx interrupt is processed up to the point where NDIS calls InterruptDone, after MPIsr. The controller interrupt is disabled in ScbCommandHigh but the active interrupt sources are still set in ScbStatus. 2) Right after InterruptDone, an interrupt pending on the other device is processed. NKCallIntChain is called starting with GIISR's ISRHandle for E100BEX. Unfortunately, the ScbStatus bits are still set and the SysIntr for NDIS/E100BEX is improperly returned. 3) MPIsr is called but as the controller interrupt is masked, it returns FALSE. 4) InterruptDone is called and as the interrupt of the other device is still active, we restart to 2): the system is hanged. The problem can easily be fixed by resetting ScbStatus bits in MPIsr instead of MPHandleInterrupt. Remi Tag: UNISCRIBE performance Tag: 93057
  - 5
    - AYGShell API Set not included in Windows CE 6 Core License after all ? Hi: The Microsoft Windows Embedded CE 6.0 list of operating system components states that the AYGShell API Set catalog item is included in the Core licence. Ref.: http://www.microsoft.com/windows/embedded/eval/wince/components.mspx However, the Run-time License Assessment Tool defines my OS image as requiring the Professional License when I include this item. Is the documentation wrong ? Thanks in advance ! Mark. Tag: UNISCRIBE performance Tag: 93053
  - 6
    - Problem to handle VK_SELECT Hi, I am developing application on windows CE. I have a h/w which has 4 keys I have given functionality on UP(VK_UP), down(VK_DOWN), menu (OEM_SPECIFIC) and select(VK_SELECT) on these keys. Now I want to write a application to demonstrate them. For that I have written small program which has a Dialogue with 3 buttons. and I switch between them using up, down keys. But when focus is on the button I want to use VK_SELECT and select the current button and do some action. But active button does not handle this event. In fact I only get VK_SPACE event on the active button. But I want to write code on VK_SELECT event. Can anyone please tell me how to get VK_SELECT event when focus is on button and that button is your active window. Tag: UNISCRIBE performance Tag: 93052
  - 7
    - LAN91C111 on PXA270 I'm porting Windows CE 5.0 MainStone BSP to a board based on PXA270. I'm trying to port the Eboot to this board. The Ethernet Controller is mapped on nCS4 (0x1000_0000). In developement kit MSC1 register value is 0aCCD1 i have not changed it in my board also. But when I try to apply it the driver in the board I am working now it appears to start ok, but it does not communicate well. The driver detects the Ethernet Controllet ok on SMCInit() routine, but It appears to fail on SCMSendFrame() or SMCGetFrame() routines. both chips have the same revision? My board doesn't have an EEPROM and I have wr0te MAC Address by hand in LAN91CInit() like // Gouri mac[0] = 0x0080; mac[1] = 0x263E; mac[2] = 0x5D0A; I am getting the following Debugg messages in the hyper terminal. Ethernet Boot Loader Configuration: 0) IP address: 0.0.0.0 1) Subnet mask: 0.0.0.0 2) Boot delay: 3 seconds 3) DHCP: (Enabled) 4) Reset to factory default configuration 5) Download new image at startup 6) Boot device order: SMSC -> PCMCIA0 -> PCMCIA1 7) Debug serial port: FFUART D) Download image now L) Launch existing flash resident image now Enter your selection: d INFO: Trying to initialize the built-in SMSC NIC... BANKSEL = 3302 MT - 0 = 3332 MT - 1 = 8000 MT - 2 = 8080 MT - 3 = 0 MGMT = d199 REV = 2dba ERDV = 4 LAN91Cxxx: Chip Id 11 Revision 10 TCR = 3332 TCR = 3332 INFO: SMSC LAN91C111 Ethernet controller initialized. INFO: MAC address: 0-E-C-80-7B-71 after that it is proceeding to next.Here it self hanging. Can anybody help me in this regard. Thanks, Gouri Tag: UNISCRIBE performance Tag: 93051
  - 8
    - CE 6.0 Plat Builder builds are SLOOOW Anyone else who has used CE 5.0 platform builder noticed that a build now takes almost 3x as long for the same configuration on CE 6.0 (this is a Sysgen on either). Can't quite understand it.... Tag: UNISCRIBE performance Tag: 93049
  - 9
    - Windows CE 6.0 calls to .NET CF SerialPort calls Anyone else tried or having issues with SerialPorts under .NET CF 2 (SP1) and CE 6.0? Establishing a manual connection or similar to a hyperterminal client shows comms is ok from the OS side of things, but if I write a .NET CF application (that runs fine under CE 5), opening a SerialPort object causes the program to throw an IOException. I have resorted to using the CE 5.0 com16550.dll in my build image - then it works fine. Tag: UNISCRIBE performance Tag: 93047
  - 10
    - Bootloader - unresolved external Hi Guys I have been making a bootloader (for AT91SAM9261), I have made needed functions (main, startup) and I have a problem with final linking and making eboot.exe file. In the output of build -c there is an error "BUILD: [01:0000000080:ERRORE] Startup.obj : error LNK2001: unresolved external s ymbol StartUp". It does not matter if in my StartUp.s file there is or there is not this label (and "EXTERN Startup"). I can't find out, why it happens. So, could anybody help? Here is a content of my sources file: TARGETNAME=EBOOT TARGETTYPE=PROGRAM RELEASETYPE=PLATFORM _COMMONPUBROOT=$(_PUBLICROOT)\common __PROJROOT = $(_WINCEROOT)\public\AT91SAM9261_MICROTECH_BIN EXEENTRY=StartUp SOURCES=StartUp.s \ main.c \ flash.c \ cdc_enumerate.c \ init_SAM9.c \ xmodem.c TARGETLIBS=$(_COMMONOAKROOT)\lib\$(_CPUDEPPATH)\blcommon.lib \ $(_COMMONOAKROOT)\lib\$(_CPUDEPPATH)\fulllibc.lib WINCETARGETFILES=BootImage StartUp code is without any errors. Tag: UNISCRIBE performance Tag: 93037
  - 11
    - ethernet download of image Hi, I'm trying to download my CE image to my target (Kontron ETX-PM board). I selected ethernet as download and transport protocol in the target device connectivity options in platform builder. On the target, I boot from a bootable USB stick with a WIN98 boot disk on it. I fire up loadcepc with following arguments : loadcepc -v eboot.bin output on the display of the target is : ------------------------------------------------------------------------------------------- Warning A20 line already enabled 4 PCI busses (Version 2.10) using configuration mechanism # 1 JUMPtec Version. No HIMEM.SYS required. WARNING : Current drive has not been prepared with JSYSCE! Windows CE may nog run correctly! Total free extended memory = 64448, largest block = 64448 Block allocated at 0x110000 Loading eboot.bin, size = 77667 Image physical start = 0x00130000, size = 84728 Section physical start = 0x00130000, size = 16 Section physical start = 0x00130040, size = 8 Section physical start = 0x00131000, size = 70652 --------------------------------------------------------------------------------------------- then the display goes blank and shows a : Jumping to 0x00138888 At that point, I instruct platform builder to attach to the target. Meanwhile on the debug port : ------------------------------------------------------------------------------------------- Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built May 24 2002 21:38:01 Copyright (c) 2000-2001 Microsoft Corporation Microsoft Windows CE Ethernet Bootloader 3.3 for CE/PC (Aug 23 2006) Boot Args @ 0x28136 PCI Device Configurations (4 PCI bus(es) present)... ======================================================== Bus, Device, Function = 0, 2, 0 Vendor ID, Device ID = 0x8086, 0x3582 Base Class, Subclass = 3, 0 => DISPLAY_CTLR Interrupt = 9 BaseAddress[0] = 0xE8000000 (Memory) BaseAddress[1] = 0xE0000000 (Memory) BaseAddress[2] = 0x1800 (I/O) ======================================================== Bus, Device, Function = 0, 2, 1 Vendor ID, Device ID = 0x8086, 0x3582 Base Class, Subclass = 3, 128 => DISPLAY_CTLR Interrupt = 0 BaseAddress[0] = 0xF0000000 (Memory) BaseAddress[1] = 0xE0080000 (Memory) ======================================================== Bus, Device, Function = 0, 29, 0 Vendor ID, Device ID = 0x8086, 0x24C2 Base Class, Subclass = 12, 3 => SERIAL_BUS_CTLR Interrupt = 9 BaseAddress[4] = 0x1C00 (I/O) ======================================================== Bus, Device, Function = 0, 29, 1 Vendor ID, Device ID = 0x8086, 0x24C4 Base Class, Subclass = 12, 3 => SERIAL_BUS_CTLR Interrupt = 11 BaseAddress[4] = 0x2000 (I/O) ======================================================== Bus, Device, Function = 2, 8, 0 Vendor ID, Device ID = 0x8086, 0x103A Base Class, Subclass = 2, 0 => NETWORK_CTLR Interrupt = 7 BaseAddress[0] = 0xE0201000 (Memory) BaseAddress[1] = 0x4000 (I/O) ======================================================== FindAllPCINetCard: Searching for PCI Ethernet NIC ... FindALLPCINetCard(0): Found Ethernet NIC (IRQ=7, IOBase=0x4000, Type=55). FindPCINetCard:Argument IOBASE=0, IRQ=0,TYPE=0 FindPCINetCard:Found 1 PCI Ethernet NIC ... FindPCINetCard: Found Ethernet NIC (IRQ=7, IOBase=0x4000). Turning on Busmaster, IO, and MEM 17 Check Busmaster, IO, and MEM 17 I8255xInitDMABuffer: DMA address: 0x200000 - size = 0x20000 I8255xInit: Init using i/o address : 0x4000 - stride = 0x1 I8255xInit: dev i/o address : 0x4000 EEPROM I/O Base: 4000 00000000:000000E0:0000004B:0000000C:00000091:00000003, I/O at 4000, IRQ 0. Receiver lock-up workaround activated. I8255x: open() irq 0. I8255x: Done open(), status 2090. I8255xInit: SUCCESS! Returned MAC Address:00:E0:4B:0C:91:03 System ready! Preparing for download... Using device name: CEPC37123 Hit ENTER within 3 seconds to enter static IP address!InitDHCP():: Calling ProcessDHCP() ProcessDHCP()::DHCP_INIT Got Response from DHCP server, IP address: 150.158.192.62 ProcessDHCP()::DHCP IP Address Resolved as 150.158.192.62, netmask: 255.255.248.0 Lease time: 259200 seconds Got Response from DHCP server, IP address: 150.158.192.62 No ARP response in 2 seconds, assuming ownership of 150.158.192.62 +EbootSendBootmeAndWaitForTftp Sent BOOTME to 255.255.255.255 Sent BOOTME to 255.255.255.255 Sent BOOTME to 255.255.255.255 Sent BOOTME to 255.255.255.255 Sent BOOTME to 255.255.255.255 Sent BOOTME to 255.255.255.255 Locked Down Link 1 Src IP 150.158.192.62 Port 0800 Dest IP 150.158.198.129 Port 11AF EthDown::TFTPD_OPEN::boot.bin -EbootSendBootmeAndWaitForTftp TFTP link[0]: State:0, DestAddr.wPort: 0, SrcAddr.wPort: 0 TFTP link[1]: State:3, DestAddr.wPort: 4527, SrcAddr.wPort: 2048 TftpReceiver, port: 0x0000D403, wkp: 0x0000D403 ------------------------------------------------------------------------------------------- At this point, the target reboots and show me my win98 dos prompt again. Platform builder still shows the message 'Waiting for BOOTME from CE device' Any hints are welcome... Tag: UNISCRIBE performance Tag: 93031
  - 12
    - Problem accessing a buffer pointer hello all We have a custom built monolithic USB Host controller driver on WINCE 5.0. When we connect a storage class device the mass-storage class driver gets loaded and runs it's initializations. In this process when the partition driver is loaded we happen to get a buffer pointer for a read request on bulk. When we write to this buffer in the HCD we get a data abort exception. We found that 1. the pointer is not NULL 2. MapCallerPtr is called before we get it in the HCD. Is there any pre-processing that we need to do before we access any such pointer. I have already tried LockPages. please advise. Shreepad Tag: UNISCRIBE performance Tag: 93029
  - 13
    - Problem accessing a buffer in USB stack hello all We have a custom built monolithic USB Host controller driver on WINCE 5.0. When we connect a storage class device the mass-storage class driver gets loaded and runs it's initializations. In this process when the partition driver is loaded we happen to get a buffer pointer for a read request on bulk. When we write to this buffer in the HCD we get a data abort exception. We found that 1. the pointer is not NULL 2. MapCallerPtr is called before we get it in the HCD. Is there any pre-processing that we need to do before we access any such pointer. I have already tried LockPages. please advise. Shreepad Tag: UNISCRIBE performance Tag: 93027
  - 14
    - Serial port modem connection I have a GPRS modem that I want to use for internet connectivity on my CE device. My CE Platform has 3 serial ports - and I have first-third instance of serial port configured in PB. Hardware-wise, the platform's BIOS assigns 3F8 to COM1, 2F8 to COM2 and 2E8 to COM3. CE grabs 3F8 for serial debug and 2F8 becomes the new COM1. I notice CE sets 2E8 to be the new COM3. If I create a direct connection, only COM1 and COM3 are available but if I get the available COM ports programmatically, I get COM1 and COM2. My problem is I cannot get serial comms working with the modem, but it works fine if I set up a direct serial connection between the CE device and a host PC (visible in hyperterminal as the CE device polling "CLIENT CLIENT..."). Creating a modem connection via the CE default "Hayes" modem on COM1 works without any issue but does not work with my modem entry below on COM3 (I get a "Port is not available: another program may be using it" message). I create the additional modem connection in the registry as follows: [HKEY_LOCAL_MACHINE\ExtModems\WaveComm] "Port"="COM3" "DeviceType"=dword:1 "FriendlyName"="WaveComm Modem on COM3" I have tried changing COM3 to COM2 without success. There seems to be something I am missing settings wise or in the registry but after all my help trawling and registry analysis I cannot figure out what (the fact that I can't see the CE registry remotely doesn't help either - see my other post) Any ideas? Tag: UNISCRIBE performance Tag: 93023
  - 15
    - Windows CE 6.0 remote tools broken? I'm having lots of problems trying to connect to a CE 6.0 device using the remote tools like registry viewer. The device is connected via Ethernet and debugging via Visual Studio 2005 works fine. I haven't been able to resolve it, after doing/checking the following: - made sure KITL enabled build setting is on and all the KITL settings in the connectivity options are checked. -Tried debug and release builds - I am trying to use KITL Tranpsort as transport and CESH as startup server - I get the error "Unable to load device side components. Please check server configuration settings". These settings worked fine under CE 5.0 platform builder (and still does). - tried running both the CE 5.0 and CE 6.0 versions of the remote tools directly by launching the .exe's without success. - I have tried all other remote connection methods/combos (KITL/CESH/MANUAL) without success. What should I check I should have component-wise in my build to get this working - as far as I can tell, my build has the same components as my CE 5.0 version. Tag: UNISCRIBE performance Tag: 93022
  - 16
    - About mediaplayer in CE5.0 Hello guys! When I used mediaplayer to play mp3,I want to use the button to control volume: For example:When I press one button,the volume turn down.And when I press another button ,it turn up. I also want to know:whether I can use a button to open the mediaplayer directly.I didn't find any materials to tell me how to do it ,please give some advices! Thanks in advance. Tag: UNISCRIBE performance Tag: 93021
  - 17
    - start os on power on Hi All, Does anyone know how I can store my OS, generated using PB CE 6.0 on my development board and have my OS start up on power on? Thanks, RH Tag: UNISCRIBE performance Tag: 93020
  - 18
    - clear Default Credentials Hi, How can I clear the Default Credentials set by the Net logon dialog? I wish to create some sort of log-off button that will enforce re-entering of the User/Pass info. Ohad Tag: UNISCRIBE performance Tag: 93016
  - 19
    - Help, why my usb host support usb mouse, but the mouse cursor doesn't be showed? Dear friends: I have a question, I select Usb Host related part, and I can use usb mouse, but I can't see the cursor on wince screen, I think I have must lost some necessary catalog, please help to know what catalog I must add to solve my problem. Best Regards Mike Han Tag: UNISCRIBE performance Tag: 93014
  - 20
    - Interpreting ERROR!!! Calling xxx_SetProcPermissions in Wince 6.0 with platman 'cepermon' tool I'm working on an SoC architecture where various drivers and user application code need to share access to the specialized hardware coherently. For example, the state video subsystem must be identically viewed by all clients - display drivers, dshow filters, etc. To implement this, I wrapped the hardware libraries in a device driver, using IOCTLs to marshall bits in from user mode. Works like a champ. However, now when I run the Remote Performance Monitor tool, I get a fairly rich spew of messages out the debug port when using the driver. 137392 PID:4cc0002 TID:5310002 ERROR!!! Calling xxx_SetProcPermissions 137696 PID:4cc0002 TID:5310002 ERROR!!! Calling xxx_SetProcPermissions 138404 PID:4cc0002 TID:5310002 ERROR!!! Calling xxx_SetProcPermissions 138707 PID:4cc0002 TID:5310002 ERROR!!! Calling xxx_SetProcPermissions 139414 PID:4cc0002 TID:5310002 ERROR!!! Calling xxx_SetProcPermissions 139780 PID:4cc0002 TID:5310002 ERROR!!! Calling xxx_SetProcPermissions 140424 PID:4cc0002 TID:5310002 ERROR!!! Calling xxx_SetProcPermissions 140828 PID:4cc0002 TID:5310002 ERROR!!! Calling xxx_SetProcPermissions 141435 PID:4cc0002 TID:5310002 ERROR!!! Calling xxx_SetProcPermissions or roughly every 300 msec while viewing any one of a number of parameters including CE processor Statistics/% processor time This is on a build where only the display driver is accessing the hardware device driver. Altering the build so that the display drier is linked to a KM DLL exporting the APIs directly, the messages go away. Anyone have a clue what the origin/interpretation of this message is? --Richard R. Lee eMVP Tag: UNISCRIBE performance Tag: 93013
  - 21
    - Difference between Nk.nb0 & nk.bin Hi all I am new to the platform builder. When i do Sysgen it will create both Nk.nb0 and Nk.bin. I am always using Nk.nb0 as OS image file. My question is : What is the difference between Nk.nb0 and Nk.bin. Thank you V. Vijaya Mohan Software Engineer Carmanpark.co.ltd Tag: UNISCRIBE performance Tag: 93004
  - 22
    - Developing NDIS drive for Windows Mobile 5.0 Hi, I want to develop a intermediate NDIS driver for a WM 5.0 IntelPXA270 based phone . Actually it is a variation of the passthru driver (a miniport driver at one end and a protocol driver at the other end). Based on what I can understand so far, I need to use platform builder for Windows CE 5 to develop the driver for the targeted platform after creating a OS design using the Intel PXA27X BSP and then export that as a CAB file which can be installed on a WM 5.0 device. Is my understanding correct? Thanks in advance. ravi Tag: UNISCRIBE performance Tag: 93003
  - 23
    - Platform Builder 5.0 and Windows Vista Hi, This week I tried Vista. It seams that I can't make Platform Builder 5.0 works under Windows Vista. The program starts but when I try to build it hangs (not responding). Anyone was able to make it work on Vista? Tag: UNISCRIBE performance Tag: 92996
  - 24
    - design templates in WinCE 6.00 Hi all, Anybody knows how can I make a template similar that custom device template that appears when you create a new Platform Builder project ?? The templates in XML seem that have been removed. Any ideas? Thanks Tag: UNISCRIBE performance Tag: 92990
  - 25
    - FormatMessage() failed + LocalFree() problem Hi all, when i launch this piece of code (WinCE6 version) : if ( DeviceIoControl (hServices,ui32Function,pvParamIn,ui32InBufferSize, pvParamOut,ui32OutBufferSize,&ui32BytesReturned, NULL) == FALSE) { LPVOID lpMsgBuf; FormatMessage(FORMAT_MESSAGE_ALLOCATE_BUFFER | FORMAT_MESSAGE_FROM_SYSTEM | FORMAT_MESSAGE_IGNORE_INSERTS, NULL, GetLastError(), 0, // Default language (LPTSTR) &lpMsgBuf, 0, NULL); LocalFree (lpMsgBuf); ui32RetVal = 0xFFFF; } then, i have got an error at the line LocalFree(), and a break point at : Coredll: DEBUGCHK failed in file C:\ymzki\private\winceos\COREOS\core\lmem\.\rheap.cpp at line 1344 Olivier Tag: UNISCRIBE performance Tag: 92986
- Next
  - 1
    - How to add splash screen Hi, I want to add splash screen in my( x86 based) winCE 5.0 device . My requirement is just to add still image in splash screen while booting . please tell me the procedure to add the splash screen . Thanks in Advance. Amit Tag: UNISCRIBE performance Tag: 92985
  - 2
    - Modifying Code in BaseClasses of Directx Hi All, I am using Win CE 5.0. I have modified code in "WinCE\500PUBLIC\DIRECTX\SDK\SAMPLES\DSHOW\BASECLASSES". I had done Build and Sysgen for that project alone. It is generating a strmbase.lib file. Later I am building Run-time Image and download the code to the Target Device, I cannot see any effect of changed code. But in PB help it is written that the Code can be modified. Can anyone help me regarding this issue. Is there any other specific way that needs to be done to see the effect of changed code. Thanks in Advance, Sarath Chandra. B Tag: UNISCRIBE performance Tag: 92982
  - 3
    - Multiple display modes in WinCE Hi, I have added support for two display modes in display driver (VGAFlat) for emulator in WinCE5.0. My intention was to change the display mode from smaller resolution to higer resolution dynamically (with out restart). I have tried with ChangeDisplaySettingsEx but it returned 0 (fail). Can any one throw some light on this? Is there any way I can change the Display mode in the Emulator dynamically. Thanks in advance. SriV Tag: UNISCRIBE performance Tag: 92981
  - 4
    - Autobuilds in WinCE 6.00 Hi All, Anybody has any experience in how to do automatic builds using WinCE 6.0? What scripts or configuration files are you using to do that? Thanks! Tag: UNISCRIBE performance Tag: 92977
  - 5
    - C.I.D. Is it possible to change the C.I.D. (that is the the Card IDentification of an SD card) wrote by the manufacturer? Mhaxx Tag: UNISCRIBE performance Tag: 92974
  - 6
    - Is there any develpment kit for mainstone III Hi all, Is there any develpment kit for mainstone III? i have upgraded mainstone II BSP to mainstone III.Till now i was using intel pxa270 processor development kit. Whether i can use the same develpment kit? rgds princy Tag: UNISCRIBE performance Tag: 92970
  - 7
    - Bluetooth - virtual Serial Port Hello, since a few days I'm struggling with the following problem: I'm using the PB 5.0 (XScale platform) sample "comtest" to create virtual Bluetooth COM ports and connect to another BT enabled PC. As long as I'm using client connections (Outgoing), everything works fine. However when I'm using the CE device as server (Incoming), the other PC cannot establish a connection (can't even see it). From the local CE view, everything looks working pretty well, i.e. the virtual COM port is registered successfully, the COM-port can be openend successfully but I'm waiting endless for an incoming connection. Furthermore, I can't see the "Serial" profile on the other PC, only a "Personal Ad-hoc Service" and a "Audio" profile. Establishing a connecting to these other profiles is no problem. Is there a need or way to make this serial profile visible first? Is there a PC-tool which can be used to establish a serial connection direct to a specific BT-ID? Maybe everything works o.k. but it is not visible due to some reason? Thank you very much, Robert Tag: UNISCRIBE performance Tag: 92968
  - 8
    - lvds Hi all My target work fine with a VGA output , but instead i want to use the LVDS. But nothing on screen when CE boots. Bios and dos is ok (i mean the screen displays the prompt) any idea. regards Tag: UNISCRIBE performance Tag: 92967
  - 9
    - mis match time stamp problem while building Hi, I tried to make the run time image(project is builded some time back) and I got the error makeimg: run command: romimage E:\WINCE500\PBWorkspaces\intel\RelDir\Emulator_x86_Debug\ce.bib Error: Mismatched time stamp on .rel file for module celog.dll requesting kernel fixup. Valid .rel file is required for kernel fixups. Windows CE ROM Image Builder v4.0.120 Copyright (c) Microsoft Corporation I searched in the gruops and got one solution as rebuild the platform with sysgen and enable the option clean before build. I did but got strange errors in header files ppkfuncs.h Those are not errors and the code is perfect. I tried in another way: removed the all projcets from work space and sysgen with clean before building option enabled. Still got errors is some other header file OAL-intr.h My platform is itself not working. I did many projects in that one. How can I solve this problem? my mail id is embeddedkumar@gmail.com . Rgds, kumar. Tag: UNISCRIBE performance Tag: 92959
  - 10
    - full kernel mode caused first-chance exception I got an error message window of "First-chance exception in xxx.dll (0xC0000005:Access Violation)",when i unset the "enable Full Kernel Mode" in platform setting. And the system is halt. But it is ok, while "enable Full Kernel Mode" is set. How to solve this?? Thanks in advance! Tag: UNISCRIBE performance Tag: 92958
  - 11
    - How to enable SSP clock? Windows CE 5.0 Intel PXA 270 In ssp/spi driver, I want to enable the ssp1 clock, but I don't know how to do. Here is the same problem: http://groups.google.com/group/microsoft.public.windowsce.platbuilder/browse_thread/thread/65e8883348499967/1e88f30d6f9f38a1?lnk=gst&q=clock+enable+spi&rnum=3&hl=zh-CN#1e88f30d6f9f38a1 Can anybody explain it in detail? Thanks in advance! Tag: UNISCRIBE performance Tag: 92957
  - 12
    - Dependencies for custom driver Hi, I am using Plaform Builder for Windows CE .NET 4.2. I have added some custom drivers to the .cec file of my BSP (using CEC Editor) in custom feature groups, but in the catalog they do not behave the same way as the standard driver types. Firstly, custom drivers using the standard driver types (e.g. serial drivers) appear in the catalog under: Third Party -> BSPs -> My BSP -> Device Drivers -> Serial -> My Serial Driver But the non-standard driver type (feature group) doesn't appear, though the driver itself does: Third Party -> BSPs -> My BSP -> Device Drivers -> My Custom Driver I would have expected it to appear in the same way as it looks in CEC Editor: Third Party -> BSPs -> My BSP -> Device Drivers -> My Driver Type -> My Custom Driver Is this normal? Secondly, if I set the RequiredCEModules to anything (e.g. just "device") then I am unable to remove the driver from the platform. If I try to delete it, Platform Builder just adds it back. My understanding is that RequiredCEModules specifies what modules the driver depends on, not what modules depend on the driver, so why would this make the driver "required"? The standard driver types use RequiredCEModules and yet I can add or remove them without problems. Is there a way to fix this? Luke Tag: UNISCRIBE performance Tag: 92956
  - 13
    - Different between debug and release build Hi all, Can anyone please tell what is the difference between a deub build and release build? Because I have created multiple XIP region and it can be boot up under debug build but not release build. It just hangs in the middle after "IOCTL_HAL_POSTINIT" (The last step of boot-up process described in http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnce50/html/ce50prev.asp). Any comments or debug skill is appreciated. Thanks. Regards, Nicholas Tag: UNISCRIBE performance Tag: 92955
  - 14
    - Developng a touchpad driver on wince 5.0 Hello, I need help for developing a device driver for a touchpad device on wince-5.0. The touchpad device is connected to i2c lines on a development arm based board. We have the wince BSP for for the board and also the i2c bus driver. But do not have a driver for the touchpad. Which already existing driver (source) in wince should I reference to develop the touchpad driver. Thanks in advance for your help. Thanks, Shiju Tag: UNISCRIBE performance Tag: 92951
  - 15
    - Wireless Power Manager and intermediate driver (passthru) Hi. I am trying to make an NDIS intermediate driver based on the passthru example included in the platform builder. With both the passthru example from WINCE 5.0 and WINCE 6.0 I run into the same problem: The passthru driver is not compatible with Microsoft's own application for powering WLAN on and off (this is the Wireless Manager or wrlsmgr.exe). After installing passthru and making sure it binds properly between the real WLAN miniport and all the protocols, the wrlsmgr.exe will no longer be able to power on or power off the card. When I enter the wrlsmgr.exe and click to change the power nothing happens. This has been tested with Windows Mobile 5.0 devices and unmodified versions of the passthru example. There are various postings on news suggesting to remove the handling of NetEventSetPower from the protocol edge of the im driver and just return NDIS_STATUS_NOT_SUPPORTED. This workaround changes the behavior wrlsmgr.exe, but it still does not work. When using such a driver wrlsmgr.exe will not show the WLAN card at all. I would very much like to hear from someone in Microsoft on this issue. Thank you, Thor. Tag: UNISCRIBE performance Tag: 92946
  - 16
    - ChangeDisplaySettingsEx in CE 6.0 Dear all, I heard that Windows Embedded CE 6.0 supports dynamical resolution change. I wrote one program that uses ChangeDisplaySettingsEx API, but it always returns DISP_CHANGE_BADMODE. My question is: Does the flat driver supports this feature? Platform: x86 CEPC Display Driver: ddi_flat.dll thanks in advanced, Brain Tag: UNISCRIBE performance Tag: 92944
  - 17
    - DaVinci---- NDIS miniport driver packet send and stop hi, i am into development of ethernet miniport driver on ARM kernel for davinci board. I have completed the driver init and all the function pointers have been implemented. I have as of now given a static ip which I have confirmed that no device is using. I can see on the ethereal that when my code runs three ARP packets are broadcasted on the network after the queryfunction nd setfunction execution. from capturing the data i can see that it is broadcasting data which ask if anyboady has the ip it has been allocated and this transfer is three times but thats all and after that i cannot see any actvity on the network and log experts pls help me out of this as i am totally unaware as to what data should come after the ARP is broadcasted thanks in advance Waiting for a favorable response -- Thanks Honey Tag: UNISCRIBE performance Tag: 92939
  - 18
    - Access ROM files Does anybody know if it's possible to read/copy system files from the PocketPC device? I mean those EXE- and DLL-files in Windows folder. It looks like like the OS protects them. For example, i cannot copy CALC.EXE even if it is not running and I always get 'Access denied' or something. Have any ideas? -- BR, Igor Software developer, Mobileyes AB Tag: UNISCRIBE performance Tag: 92938
  - 19
    - CE5.0 problem adding FATFS I can't add to my project SYSGEN_FATFS When I add it , PB give me the error below. I didn't find in my winceroot fatutil.dll Best Regards Fabio Copyright (C) Microsoft Corporation. All rights reserved. -nodefaultlib -entry:DllMain -pdb:C:\WINCE500\PBWorkspaces\ASEM3\WINCE500\CEPC_ASEM_x86\cesysgen\oak\target\x86\retail\fatutil.pdb /opt:ref -debug -debugtype:cv -incremental:no -map:C:\WINCE500\PBWorkspaces\ASEM3\WINCE500\CEPC_ASEM_x86\cesysgen\oak\target\x86\retail\fatutil.map -savebaserelocations:C:\WINCE500\PBWorkspaces\ASEM3\WINCE500\CEPC_ASEM_x86\cesysgen\oak\target\x86\retail\fatutil.rel -MERGE:.rdata=.text -ignore:4001,4070,4078,4086,4089,4096,4099,4108,4229 /STACK:65536,4096 -subsystem:windowsce,5.00 /base:0x10000000 C:\WINCE500\PBWorkspaces\ASEM3\WINCE500\CEPC_ASEM_x86\cesysgen\sdk\lib\x86\retail\coredll.lib C:\WINCE500\public\common\oak\lib\x86\retail\storeapi.lib C:\WINCE500\public\common\oak\lib\x86\retail\fatutil.res C:\WINCE500\PBWorkspaces\ASEM3\WINCE500\CEPC_ASEM_x86\cesysgen\sdk\lib\x86\retail\coredll.lib C:\WINCE500\public\common\sdk\lib\x86\retail\corelibc.lib C:\WINCE500\PBWorkspaces\ASEM3\WINCE500\CEPC_ASEM_x86\cesysgen\oak\lib\x86\retail\fatutil.exp fatutil.exp : error LNK2001: unresolved external symbol _DefragVolume fatutil.exp : error LNK2001: unresolved external symbol _DefragVolumeEx fatutil.exp : error LNK2001: unresolved external symbol _DefragVolumeUI fatutil.exp : error LNK2001: unresolved external symbol _FormatVolume fatutil.exp : error LNK2001: unresolved external symbol _FormatVolumeEx fatutil.exp : error LNK2001: unresolved external symbol _FormatVolumeUI fatutil.exp : error LNK2001: unresolved external symbol _ScanVolume fatutil.exp : error LNK2001: unresolved external symbol _ScanVolumeEx fatutil.exp : error LNK2001: unresolved external symbol _ScanVolumeUI C:\WINCE500\PBWorkspaces\ASEM3\WINCE500\CEPC_ASEM_x86\cesysgen\oak\target\x86\retail\fatutil.dll : fatal error LNK1120: 9 unresolved externals NMAKE : fatal error U1077: 'link' : return code '0x460' Stop. NMAKE : fatal error U1077: 'C:\WINCE500\sdk\bin\i386\nmake.exe' : return code '0x2' Stop. Tag: UNISCRIBE performance Tag: 92937
  - 20
    - How to detect Minimal Window Manager Configuration at compile time? Hello experts, I have a small test application which I include in different platforms. On some platforms there is Minimal Window Manager Configuration available and on some other platforms not. If it is not available I want to exclude some tests. How can I set a compiler define, when Minimal Window Manager Configuration is not available? In the sources file I tried !IF ("$(SYSGEN_MINWMGR)" != "1") CDEFINES=$(CDEFINES) -DNO_WMGR !ENDIF But this only works if I add Minimal Window Manager Configuration to my platform manually. If it is added automatically by dependency rules, SYSGEN_MINWMGR is not defined, and this statement doesn't work. I'm using PB5.0 on ARM9. TIA -- Michael Reim reim AT helmut-fischer DOT de Tag: UNISCRIBE performance Tag: 92936
  - 21
    - Building Problem I am modifying driver projects in PB 5.0. Once I right click the driver project and click "Build Current Project" with "clean before building" and "Make Run-time image After Build" selected, The nk.bin image sometimes doesn't update at all. What will run on the machine is just the old driver version, not what I have modified at all... How to solve it? Thanks in advance!! Tag: UNISCRIBE performance Tag: 92925
  - 22
    - Help, WinCE Usb ActiveSynch is not stable, but the massStorage is very well Dear Sirs: My platform is S3C2440 CPU+ PHILIPS Isp1582 usb 2.0 chip, the usb function mass storage is very well, but usb activesynch is not stable, when I use Activesynch to transfer data, it will break after well work severial seconds. and the following message will be got on though DNW. Posting WM_NETCONNECT(FALSE) message, ErrorCode = 631(0x277) Please help me, thank you very much. Best Regards Mike Han Tag: UNISCRIBE performance Tag: 92923
  - 23
    - Any restrictions/problems with PlatformBuilder 4.2 evaluation vers We created an OS image using Platform Builder 4.2 evaluation version. We see that the device doesn't boot and looks like it hangs up at kernal launch. All the changes we made seem to be correct, but we came to know that there is a restriction with the evaluation version saying that the changes we made at source level like (armtrap.s) are not reflected in the image. Is that true? Is there any restriction in using the evaluation version. Tag: UNISCRIBE performance Tag: 92922
  - 24
    - Command for setting USB client printers Printer processor data type as "Text" (Ascii) Hi All, Can somebody tell me command for setting USB client printers Printer processor data type as "Text" (Ascii) If there is any command to do this then is it universal? Basically i wannt to programmatically set the usb client printers, printer processor data type to "Text" (ASCII) mode If there is any other method please reply. Tag: UNISCRIBE performance Tag: 92921
  - 25
    - Webbrowser in Win CE 5.0 #2 Hello. My name is JeongHo. I am programming a customized web browser with IWebBrowser2 in windows ce 5.0 And I want to embody some functions which copy/cut/paste. I made it in Win32 Application already.. Using by these ways Way1 HRESULT hr = m_pWeb->ExecWB( OLECMDID_COPY, OLECMDEXECOPT_DODEFAULT, NULL, NULL); if (FAILED(hr)) { int n = GetLastError(); ASSERT(false); } Way2 IHTMLDocument2 *pHtmlDoc; hr = pDispatch->QueryInterface<IHTMLDocument2>(&pHtmlDoc); EHResult::CheckException( L"CMainFrame.Copy.QueryInterface<IHTMLDocument2> Fail (0x%08x)", hr); IHTMLSelectionObject *pHtmlObj; hr = pHtmlDoc->get_selection(&pHtmlObj); EHResult::CheckException(L"CMainFrame.Copy.get_selection Fail (0x%08x)", hr); { IDispatch *pRange; hr = pHtmlObj->createRange(&pRange); EHResult::CheckException(L"CMainFrame.Copy.createRange Fail (0x%08x)", hr); IHTMLTxtRange *pText; hr = pRange->QueryInterface<IHTMLTxtRange>(&pText); EHResult::CheckException( L"CMainFrame.Copy.QueryInterface<IHTMLTxtRange> Fail (0x%08x)", hr); VARIANT null; VariantInit(&null); VARIANT_BOOL isOk; hr = pText->execCommand(L"Copy", VARIANT_FALSE, null, &isOk); EHResult::CheckException(L"CMainFrame.Copy.execCommand Fail (0x%08x)", hr); } But It doesn't work in windows ce 5.0 L What should I do now~ And I have one more trouble. I have to control the element's focus (in html document like LINKs or CONTROLs) by arrow key. Is there a way get the current focus of elements?? It also possible to get in Win32 by pHtmlDoc->get_activeElement But Win CE 5.0 L Please Help me. Thank you. ps: Thank you 'Paul G. Tobey [eMVP]' for your help. But the way doesn't work... and I couldn't find the sample in SDKs which I downloaded things... If you don't mind would plz send me the Sample to roamjh@hotmail.com? Tag: UNISCRIBE performance Tag: 92920

Has anyone else experiences a significant (and visible) slow down in text
drawing when adding UNISCRIBE (complex scripting) support to CE 5.0 ?

I haven't gone looking to see if all text is now drawn with some other blit
or line call, but we added SYSGEN_UNISCRIBE to our builds which fixed some
hebrew and arabic drawing, but all text objects now render significantly
slower to the point that one can see dialogs refresh.

Top