SwMixer error

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - How to enumerate all the forms Hi to all I use windows CE embedded 6.0 R2 and i develop in VB.NET 2005. My device is an x86. In my application i need to enumerate all the forms (not only the forms opened). My.Forms is not a collection and i cant use it into for...each instruction... Thanks in advance, any suggestions/helps will be highly appreciated and excuse me for my bad english! Ale Tag: SwMixer error Tag: 113403
  - 2
    - Which is the active form ? Hi to all I use windows CE embedded 6.0 R2 and i develop in VB.NET 2005. My device is an x86. In my application i need identify which is the actived form and if a specific form is actived (not open or closed, not enabled or disabled, not visible or hide but which is the form.activate()). ...and what is the difference between focus() and activate() method ? Any informations/helps will be highly appreciated, Thanks! Ale Tag: SwMixer error Tag: 113402
  - 3
    - cerdisp.c can't synthesizes all keystroke? Hi I need a remote display , which in the directory:\WINCE420\PUBLIC\COMMON\OAK\DRIVERS\CERDISP\CERDISP. I want to use the remote contol device keyboard same as keyboard on the local device. for this i used the cerhost.exe in the pc,and open a wordPad file in wince device.I am able to successfully move the right,left,up,down,delete,page up,page down,home,enter in the opened file just as i do in pc,but i can't insert any other char and i am sure the wordpad file has the focus.the following code is some of cerdisp.c case WM_SYSKEYUP: case WM_SYSKEYDOWN: if (recv (Sock, (char *)MouseData, sizeof(USHORT), 0) == sizeof(USHORT)) { dwFlags = ((WM_KEYUP == Cmd) || (WM_SYSKEYUP == Cmd)) ? KEYEVENTF_KEYUP : 0; // No scancode data. RETAILMSG(1,(TEXT("%x,newdwFlags=%d\r\n"),MouseData[0],dwFlags)); keybd_event ((BYTE)MouseData[0], 0, dwFlags, 0); } break; I am able to successfully capture the keyboard event and display with UART,all Virtual key are right,but the system just deal the right,left,up,down,delele,page up,page down,home,enter and tab. Question: 1. which function will be called in the kernel by keybd_event? 2.how can i synthesizes all keystroke? Tag: SwMixer error Tag: 113401
  - 4
    - suspend/resume problem with HCI UART Bluetooth device On my Windows CE 6, I am using an HCI Bluetooth module connected over UART. With the universal bluetooth loader (btd.dll) and the activated UART driver bthuart.dll, this works fine. If I reset my bluetooth device during suspend (over GPIO because of power consumption), my bluetooth stack isn't working correct after resuming. I tried to stop (suspending) and start (resuming) my bluetooth stack, but this doesn't change any behavior (I copied the start/stop code from btloader). - Does anybody have experience in this topic? - How do I reinitialize my bluetooth stack after suspend/resume? Tag: SwMixer error Tag: 113400
  - 5
    - 3.5inch display problem.... Hi all, I have a pxa270 board with 3.5inch display. It is SAMSUNG LTV350QV_F04. I have the entire bsp source with me and hence i have the 3.5inch lcd driver for it. The display uses spi interface to initialize the lcd. Now, i have a need to interface the same display with my pxa255 processor board. So, i am modifying my existing display driver, by referring to my pxa270 display driver. I made the spi initialization part of my display. Now, my display is initializing and i can see some changes or happening on my display. I included a small test program in the display driver which will display the color red, green, blue, black and white. Display black, white is ok. But when i display the color blue, red and green. It is too light. I mean the shades are very light. I can't predict what's the reason behind this...... The other problem that i am facing is, after the board boots and display driver is up, i could see only some light colored stripes on my lcd. Since the display is having touchscreen builtin. When i touch the touchscreen randomly, i could see that the applications are starting in mydebug windows, but on the display side, just the strips moves here and there and some color changes. I copied the entire lcd settings, i mean the lccr0,lccr1, lccr2 from my pxa270 driver. Even the spi initializations are same... i tried, using the same dirtyrectdump algorithms that was present in 270. I have a working lcd driver on my pxa25 board. But this driver is for non-spi lcd. It doesn't require any spi initialization nor to select the lcd chipselect etc... The one more difference i am finding between this pxa255 and pxa270 is the alternate function pins L_vsync and L_cs which i can not find in pxa255. In pxa270 lcd driver they configure L_vsync as input and L_cs as high active output... I have not found how to handle these in pxa255 for this lcd....I don't get an clear idea on this stuff. What may be the problem??? Since i am a new person to display driver. Hope someone gives me a good idea on what's happening... If anyother details you are required to help me, i can provide... expecting suggestions from you experts soon.... -- Ramesh.c Innovate Sofware Solutions. Bangalore. Tag: SwMixer error Tag: 113398
  - 6
    - Cache eviction avoidance Hi all, I am working on Wince5.0 on Arm920 processor board. I am trying to lock a certain set of data in the cache and complete my processing. But I suppose that the data that is locked is getting evicted during context switching. Is their any way to avoid this cache flushing in WINCE. In which part of the code is the cache flushing implemented in the OS. Do anyone knows any other best way of cache usage in WINCE5.0? Regards Pradeep Tag: SwMixer error Tag: 113392
  - 7
    - Display Driver's DrvEscape gets inconsistent Power States Resuming OS: Windows CE 6.0 R2 Updates: Rollup and Jan 2008-Apr2008 Arch: ARM Recently I've noticed that my display driver is not always powering up after coming out of sleep mode. Through some debugging I've Noticed that one of three scenarios are occurring when resuming from sleep / suspend mode. Of these, only one situation results in a success setup. When everything is working the Display Driver's DrvEscape routine (overloaded from DDGPE) gets a Power Request to move to D3 (Suspend) where it stays until the system is requested to power up. At this time it gets a request to transition to D2 (Standby) followed by another request to move to D1 (Low On.) In one of the situations that fails, it behaves exactly like the Success case except the final call into Power State D1 never arrives (or any other power state.) In the final failure situation after getting a power state change to D2 it receives a power state change to D4 (Shutdown) instead of D1 or D0. I am also using the Default Power Manager, with all Timeouts set to 0 (Disabled) (AC/Batt User/System/Suspend) HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power DisableGWESPowerOff=1 ScreenPowerOff=0 HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\States (These are Keys with the default value) On=D0 ColdReboot=D4 Reboot=D4 Resuming=D2 Suspend=D3 SystemIdle=D2 UserIdle=D1 SystemIdle has the Display Class ID with D4 Suspend has the NDIS Class ID with D4. Thank you, any help is appreciated. Brad. Tag: SwMixer error Tag: 113387
  - 8
    - Debug Crash when using Profiler (Windows CE 6.0 R2) OS: Windows CE 6.0 R2 Updates: R2 Rollup, Jan-April 2008 Monthly Updates Platform: ARM Debug Build Options (Listed are Enabled):IMGEBOOT=1 IMGPROFILER=1 IMGRAM64=1 Total ROM Size: 56,156,288 bytes Total .bin Size: 55,205,131 bytes Recently while trying to debug another issue I went to load up a Debug Build on my platform (I haven't really used a debug build at all since I've done the Upgrade to R2.) and noticed that my image can no longer successfully boot as it crashes during the initialization. I didn't have either KITL or the Kernel Debugger loaded as I only wanted the debug messages (and I'd have to use a Serial KITL as I'll be doing tests that span a suspend and resume.) After seeing the crash dump (and seeing nkprof) I decided to see if it was the profiler that was causing the crash so I removed IMGPROFILER=1 from the Build Options and my Boot Crash seems to have gone away. Although, I seem to be able to continue what I was working on I would like to track down and fix this issue. Has anyone tried to use the profiler with the Debug Build with R2 on an ARM platform? Has anyone had any issues with it? I have not used the profiler since installing R2 but have used it in the Release Build with our platform prior to R2. My config.bib basically has 2 MB assigned to the NK image and just over 121MB assigned to the RAM. AUTOSIZE=ON and KERNELFIXUPS = ON. The crash dump: NK Kernel: DEBUGCHK failed in file C:\yzkiqfe\private\winceos\COREOS\nk \kernel\nkprof\..\physmem.c at line 103 Faulted in KCall, pCurThread->dwStartAddr = c0784848, PageFreeCount = 000016b8!! Original Context when thread faulted: Exception 'Undefined Instruction'(1) Thread-Id=03820002(pth=85cdbdb0) PC=c09b11f0 BVA=d0c5df40, dwInfo = 00000007 R0=d0c634f0 R1=d0c5eea4 R2=00000106 R3=00000001 R4=00004444 R5=00005555 R6=00006666 R7=00007777 R8=00008888 R9=00009999 R10=00001010 R11=00001111 R12=d0c5ee90 SP=d0c5dee4 Lr=c09ad694 Psr=2000001f Context when faulted in KCall: Exception 'Undefined Instruction'(1) Thread-Id=03820002(pth=ffffc124) PC=8010d9a0 BVA=d0c5df40, dwInfo = 00000007 R0=0000de37 R1=03820002 R2=85cdbde8 R3=00000000 R4=d0c5eea4 R5=00000106 R6=00000001 R7=c09b11f0 R8=00008888 R9=00009999 R10=00001010 R11=00001111 R12=00000000 SP=ffffc274 Lr=8010d97c Psr=60000013 Thank you for any help, Brad. Tag: SwMixer error Tag: 113386
  - 9
    - error 0xc0000016 with SDReadWriteRegistersDirect() I am getting me SDIO wifi driver up to snuff and am able to read registers on my hardware. However, the read of one register in the midst of my registers causes the above error. To reiterate: I can access registers in the 0x100-0x600 range except for a particular request in the 0x300s. Is there documentation that would define what this status means? Thanks, -Eric Tag: SwMixer error Tag: 113369
  - 10
    - some R2 flash mdd questions 1. From some senario I guess flashmdd layer reserves some blocks for private usage(maybe for compact). For example, pdd layer tells mdd there are 1030656 sectors through FMD_GetInfo(), while I can see only 1015040 sectors through control panel. where are the losted 15616 sectors? 2. Moreover, can i open some debug zone to watch the mdd layer's behavior? 3. there is an interface, GetLifeCycleInfo, in pdd to get erase time, while the sample only returns ERROR_NOT_SUPPORTED. Doesn't mean if pdd doen't give any information to mdd, mdd won't do any wearleveling? Tag: SwMixer error Tag: 113367
  - 11
    - Transport Layer, SDK, Remote Tools CE6.0 Hello, I got a complicated problem I cannot solve regarding the Remote Tools. Here is the discription: 1. Step: I build a WinCE6.0 Image (x86) in Visual Studio 2005. 2. Step: I build a SDK. 3. Step: Install the SDK. 4. Step: (ERROR) Want to connect with Remote Tools in Visual Studio 2005 Menu-->Target-->Remote Tools ; My device from my SDK doesn't show up. 5. Step: Connect with Remote Tools from Start Menu -->Visual Studio 2005-->Remote Tools ; My device shows up, i can configure the TCP Connect Transport. All fine. 6. Step: Rebuild my WinCE6.0 Image (x86), I changed a few things, nothing important 7. Step: I rebuild and install the SDK 8. Step: same like Step4 9. Step: (ERROR) Want to connect with Remote Tools from Start Menu -->Visual Studio 2005-->Remote Tools ; My device shows up, but I CANNOT configure the TCP Connect Transport 10. Step: I installed the first SDKs on another machine. The same behavior! So here are a few question: Why does not my device show in Step 4? In Step 9, why does nothing happen when I press the "Configure"-Button in Device Properties? I belive in Windows CE 5.0 you could add a transport layer to SDK, how can I do this in WinCE6.0? Regards, Mazzo Tag: SwMixer error Tag: 113360
  - 12
    - R2 booting time is long when nand is full Is there any mother to reduce the booting time? as i know, there seems to be some API can set system enter power off mode during which MDD will do something to speed up booting next time? could you give me some information about this issue? 3x Tag: SwMixer error Tag: 113357
  - 13
    - CE 6.0 Activesync 4.5 problem Hi everybody, I am developing a USB client driver using CE 6.0 as a serial-emulation driver. I found that each time when host is about to finish the setup procedure. It sends a request type 0x21, bRequest 0x22 and wValue 0x01 packet. If I do not ack a zero length IN packet in the enumeration stage. The host will show a problem occurs when installing new wince usb device. Is there anybody know what bRequesttype=0x21 means? Thanks. Warewolf Tag: SwMixer error Tag: 113326
  - 14
    - Serial driver Issue!!! Hi all, I am facing problem with UART serial driver. I am using the sample code for serial driver in device emulator provided by Microsoft using which I am porting it on s3c2440 on WinCE6.0. There is not much difference in the UART IP and the UART serial driver is working fine. Now when I Power down and power up the device using power button, its unable to connect to the Active sync but again when I do power down and power up second time, its get connected. I observe the following thing during my work on this issue: 1. On alternate power down and power up, device connect to PC via activesync. 2. While doing power down and power up first time when device don't connect to PC, during power up, the active sync icon indicating connection with the PC get disconnected means while power down, device is unable to communicate that it has to disconnect it self also. and during power up I can see its still connected and later its got disconnected. My query: 1. I disable the RTS so that device communicate with the PC to disconnect and activesync disconnect. but unable to communicate to device it self.. Any small idea will be highly appreciated. 2. Any other idea to resolve this issue will be highly appreciated. Thanks in advance, Best regards, MMK Tag: SwMixer error Tag: 113321
  - 15
    - wince equivalent of jiffies_to_usecs(this is in linux 2.6) could anybody tell me the wince equivalent of jiffies_to_usecs( this in linux 2.6) this function converts jiffies to milliseconds and back. thanks in advance Tag: SwMixer error Tag: 113319
  - 16
    - What is the best way to change public .res files? I need to change some .res files (mainly cplmain resources) in the PUBLIC directory. I tried to copy the files to my platform\Files\<LANGID> dir, but it seems that the sysgen process links again the .res files in %_PROJECTROOT%\cesysgen\... directory, and the files in my platform's Files dir will be copied to %_FLATRELEASEDIR%\<LANGID>, so it doesn't work. I also tried sysgen_capture, but it's hard to resolve the build errors. regards, Hou. Tag: SwMixer error Tag: 113312
  - 17
    - Ping over direct connection Hi, When both my CE5.0 device and my PC are connected to the LAN, they can ping each other successfully. However, when both are connected directly by a cross-over Ethernet cable, the PC can still ping the CE5.0 device successfully, but not the other way around. On the CE5.0 device, the error message is "PING: transmit failed, error code 11010". I could not find any info about error code 11010. Any insight for the problem is much appreciated. Thanks. JCAVO Tag: SwMixer error Tag: 113311
  - 18
    - how to increase sdram hi all,my system had 128M sdram, but now only 64M are used. so I wanna change the related files to use the whole 128M ram, my processor is pxa255 in ce4.2,and so bank0 and bank1,each 64M. I modified the following files: 1$B!$(Bcfwxsc1.c BOOL OEMGetExtensionDRAM(LPDWORD lpMemStart, LPDWORD lpMemLen) { *lpMemStart = 0x84000000; *lpMemLen = 0x02000000; return TRUE; } 2,fwxsc1.s orr r3, r3, #MDCNFG_DE1 3,memmap.inc DCD SDRAM_BASE_C_VIRTUAL, SDRAM_BASE_PHYSICAL, 96 4,xsc1bd.inc MDCNFG_VAL EQU 0x19C319C3 after then ,my system can work properly, but in the control panel, the ram did not increase any more, anyone tell me the reason? thank u very much. another retail thread is below,maybe u can help me, any suggestion will be appreciated. http://groups.google.com/group/microsoft.public.windowsce.platbuilder/browse_thread/thread/090a4610666fc28e/68c8f77f4464fc29?lnk=raot#68c8f77f4464fc29 Tag: SwMixer error Tag: 113310
  - 19
    - WinCE Update releases for the month of May 2008 The Microsoft® Windows® CE update rollup will be released the second Tuesday of every month, the latest release occurring on or around June 10th, 2008. The following updates for Windows CE have been recently released and are available for download. More information for each update is provided in the Readme document available after the individual update(s) has been installed. Windows CE 5.0 Update name: Windows CE 5.0 Platform Builder Monthly Update (May 2008) Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=84261253-1FBB-4ABE-AE55-DF30B46F3821&displaylang=en Description: This is a set of updates for Windows CE Platform Builder released during the period of May 1 - May 31, 2008. These Microsoft Windows CE updates are fixes for Windows CE operating system problems you run into during the development and maintenance of your custom platform. Windows CE 6.0 Update name: Windows CE 6.0 Platform Builder Monthly Update (May 2008) Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=C71FEA6A-613E-4ED7-9F11-04AA582A7B74&displaylang=en Description: This is a set of updates for Windows CE Platform Builder released during the period of May 1 - May 31, 2008. These Microsoft Windows CE updates are fixes for Windows CE operating system problems you run into during the development and maintenance of your custom platform. Download Link - directs you to the Microsoft Download Center page associated with each update. Each update is contained in a self-extracting compressed file. Component - displays the module(s) updated in each update Description - provides more information on the issue(s) fixed **DO NOT REPLY - THIS E-MAIL IS BEING SENT TO YOU FROM AN UNMONITORED ACCOUNT. Due to Microsoft's security requirements, the hyperlink(s) contained in this e-mail may not automatically open your browser. If you experience any difficulty, please copy the link and paste into your browser. Tag: SwMixer error Tag: 113309
  - 20
    - LoadIntChainHandler returns NULL Hi Everyone, I have a problem and need your expertise. I migrated USBOTG driver from MainstoneIII to our BSP based on PXA320 and WinCE 6.0. When I run the OS with KITL and debugger enabled, the driver works fine. But if I disable the KITL and debugger, LoadIntChainHandler(...) returns NULL and the driver is unloaded. The following are the related messages: with KITL and debugger enabled: LoadIntChainHandler ddi.szIsrDll = giisr.dll, ddi.szIsrHandler=ISRHandler, ddi.dwIrq=0xb 22950 PID:400002 TID:d90002 RELFSD: Opening file giisr.dll from desktop PB Debugger Loaded symbols for 'C:\WINCE600\OSDESIGNS\...\GIISR.DLL' 22981 PID:400002 TID:d90002 LoadIntChainHandler successed with KITL and debugger disabled: LoadIntChainHandler ddi.szIsrDll = giisr.dll, ddi.szIsrHandler=ISRHandler, ddi.dwIrq=0xb LoadIntChainHandler failed I also copied registry settings for your reference: [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\UsbOtg] "Dll"="ms2_usbotg.dll" "Prefix"="OTG" "Order"=dword:10 "MemBase"=dword:40600000 ; UDC_BASE_U_VIRTUAL "MemLen"=dword:1000 ; Needs at least 0xE04. Round up to 1 page. "Irq"=dword:0b "IsrDll"="giisr.dll" "IsrHandler"="ISRHandler" "HCDPortNumberOnOTG"=dword:2 "BusIoctl"=dword:2a0048 "InterfaceType"=dword:0 "IClass"=multi_sz:"{6F40791D-300E-44E4-BC38-E0E63CA8375C}=%b" Thanks a lot, James Tag: SwMixer error Tag: 113307
  - 21
    - Memory mapping in windows CE 6.0 Hi, I am writing KITL Ethernet driver for CEPC platforms. I am using memory base (BAR [0] of PCIe config space of my device which is 0x50100000. I am using 512 MB RAM. But when in my code I try to read any device memory using 0x50100000 base address, my WinCE machine restart Do I need to reserve memory at address 0x50100000 ? I also used HalTranslateBusAddress (to translate bus address to system physical address) and MmMapIoSpace (to translate physical address to virtual address) but it return same virtual address (0x50100000) which is my physical address. Below is fraction of memory mapping 1. startup.asm _OEMAddressTable: dd 80000000h, 0, 20000000h dd 0, 0, 0 ------------------------------------------------------ 2. boot.bib MEMORY EBOOT 00130000 00040000 RAMIMAGE RAM 00170000 00070000 RAM ETH_DMA 00200000 00020000 RESERVED dwReservedArea 00000000 00220000 FIXUPVAR 3. config.bib NK 80220000 009E0000 RAMIMAGE RAM 80C00000 1E000000 RAM nk.exe :dwOEMTotalRAM 0 20000000 FIXUPVAR ------------------------------------------------------------------- Kindly help. Sincerely, Tushar Dave Tag: SwMixer error Tag: 113305
  - 22
    - Device notifications : port device name Hi, My app registers for device-notifications, in order to get more info about devices added. For Disks it's simple to get the devicename (like "Dsk1:") from the notification. (through LPARAM I think...) For PORTS (COM1:) I can only get the device-interface-GUID as far as I can tell. (LPARAM=0) I read on inet that using this info, I need to Enumerate all my devices, access the active-driver-registry, and determining myself which was added or removed. (how ??? by keeping device-lists ? hope not...) This seems way to complex (error prone,slow), since I think it IS known which is the devicename is beeing mounted. How can I get to this info in a simple and straightforward way ? in short : the goal is to call 2 members from my devicenotification-interface : void PortAdded(WCHAR *devname); void PortRemoved(WCHAR *devname); Where devname is something like "COM1:" Any Tips ? Greetings, Rob. Tag: SwMixer error Tag: 113304
  - 23
    - USB Mass Storage, local disk vs removal disk. Hi all. I design my device as Mass storage. When I connect it to PC by USB ,why PC side show " local disk" , but not the "removal disk". So I cant remove it by click "remove" in the PC side. what should I set in the resigtry or ??? BR Jack Tag: SwMixer error Tag: 113293
  - 24
    - include sdbus2 on ROMIMAGE Hi... I can not english well.... I'm trying to include sdbus2 at WM 6.0... but it does not working... set IMGSDBUS2=1 After MakeImge... RomImage(NK.bin) does not include sdbus.dll... After Booting I copied sdbus.dll (renamed from sdbus2.dll) to device... It's working SDHC very well... I did check ce.bib - ce.bib ; @CESYSGEN IF CE_MODULES_SDBUS2 sdbus.dll E:\XXXXXX\WPC\sdbus2.dll NK SH ; @CESYSGEN ENDIF CE_MODULES_SDBUS2 I think that env variable CE_MODULES_SDBUS2 refer from ceconfig.h... - ceconfig.h #define CE_MODULES_SDBUS 1 #define CE_MODULES_SDBUS2 1 why does not incude sdbus.dll (sdbus2.dll)? ----------------------------------------------------------------------------------------------------------- add... I try fix common.bib #if defined IMGSDBUS2 ; @CESYSGEN IF CE_MODULES_SDBUS2 sdbus.dll $(_FLATRELEASEDIR)\sdbus2.dll NK SH ; @CESYSGEN ENDIF CE_MODULES_SDBUS2 #else ; @CESYSGEN IF CE_MODULES_SDBUS sdbus.dll $(_FLATRELEASEDIR)\sdbus.dll NK SH ; @CESYSGEN ENDIF CE_MODULES_SDBUS #endif | v #if defined IMGSDBUS2 ; @CESYSGEN IF CE_MODULES_SDBUS sdbus.dll $(_FLATRELEASEDIR)\sdbus2.dll NK SH ; @CESYSGEN ENDIF CE_MODULES_SDBUS #else ; @CESYSGEN IF CE_MODULES_SDBUS sdbus.dll $(_FLATRELEASEDIR)\sdbus.dll NK SH ; @CESYSGEN ENDIF CE_MODULES_SDBUS #endif CE_MODULES_SDBUS2 -> CE_MODULES_SDBUS included sdbus.dll (sdbus2.dll)... Good working!!! Good working!!! --------------------------------------------------------------------------------------------------------------------- In conclusion... I think that makeimg (romimage) does not recognize CE_MODULES_SDBUS2 Please... Help me... Tag: SwMixer error Tag: 113290
  - 25
    - equivalent of wait_event_timeout(linux) in WinCE hi could anybody tell me wince equivalent of wait_event_timeout (this is in linux) thanks in advance Tag: SwMixer error Tag: 113285
- Next
  - 1
    - What is the best way to change public .res files? I need to change some .res files (mainly cplmain resources) in the PUBLIC directory. I tried to copy the files to my platform\Files\<LANGID> dir, but it seems that the sysgen process links again the .res files in %_PROJECTROOT%\cesysgen\... directory, and the files in my platform's Files dir will be copied to %_FLATRELEASEDIR%\<LANGID>, so it doesn't work. I also tried sysgen_capture, but it's hard to resolve the build errors. regards, Hou. Tag: SwMixer error Tag: 113284
  - 2
    - How to get bta2dp.dll in Wince6.0 Hi All, In Wince6.0 help(ms-help://MS.VSCC.v80/MS.VSIPCC.v80/MS.WindowsCE.v60.en/CE_OS_NetwrkPAN/html/5a09baa1-7a4a-4f78-9a70-ca8843d5475f.htm), it says there is Bta2dp.dll. But I can't find it. Is anyone know how to get the Bta2dp.dll in Wince6.0? Thanks Gene Tag: SwMixer error Tag: 113281
  - 3
    - How do I know that image is stamped correctly with license key? Hi, I stamped my nk.bin with the Windows CE license key, which I received from the retailer, and converted nk.bin to nk.nb0 using the utility cvrtbin.exe. When I run the image on my target, everything looks as before. I expected to go away the Windows CE version info written on the desktop. How do I know that the image is stamped correctly? Is there any utility to check? I do not want to give the image to the production without testing that... Thank you, Peter Tag: SwMixer error Tag: 113277
  - 4
    - TLBMissHandler referenced :A migrating BSP from Wince500 to Wince600 Question? Hi: in my building our migrated BSP in PB6, there happened the following error message: Linking C:\WINCE600\platform\wce600_nxc2600\target\MIPSII\retail\KITL.dll BUILD: [01:0000001351:ERRORE] oal_cache_nxc.lib(tlb.obj) : error LNK2019: unresolved external symbol TLBMissHandler referenced in function OALClearTLB Would anyone can response this soon? Thanks and Best Regards. vincent tsai Tag: SwMixer error Tag: 113274
  - 5
    - 6.0 KITL - "unrecognized service KDBG" I'm building an ARM image on 6.0. PB connects with everything execpt KDBG service. Output is below. It will progress no further and just frequently print out "!Received config for unrecognized service KDBG". Enable kernel debugger is checked. Enable KITL is also checked. I've ran Clean Sysgen after enabling them. I've also manually built clearing and setting variables, as found in prior post. For some reason it appears to not be including kernel debugger support. Any ideas? ------------------------------------------------------------------------------ Connecting to Desktop KITL: Connected host IP: 1 Port: 1271 KeyIndex 0 = -1 KeyIndex 1 = -1 KeyIndex 2 = -1 KeyIndex 3 = -1 KeyIndex 4 = -1 KeyIndex 5 = -1 KeyIndex 6 = -1 KeyIndex 7 = -1 +KITLRegisterDfltClient, service:0 +KITLRegisterDfltClient, service:1 -OEMKitlStartup(rc = 1) Waiting for service 'DBGMSG' to connect..., fUseSysCalls = 0 ProcessAdminMsg: Receive Config message for service DBGMSG ProcessAdminMsg: Receive Config message for service PPSH ProcessAdminMsg: Receive Config message for service DBGMSG ProcessAdminMsg: Receive Config message for service DBGMSG !Received config for unrecognized service KDBG ProcessAdminMsg: Receive Config message for service PPSH !Received config for unrecognized service KDBG !Received config for unrecognized service KDBG !Received config for unrecognized service KDBG !Received config for unrecognized service KDBG !Received config for unrecognized service KDBG Tag: SwMixer error Tag: 113266
  - 6
    - KITL ethernet driver in windows CE 6.0 fails Hi, I am developing KITL Ethernet driver for Windows CE 6.0. There are two binaries 1) eboot.bin 2) KITL.dll . Eboot.bin initialized my Network card correctly and I can transfer OS image from debug to target machine. However, once OS gets loaded into target machine, KITL.dll gets invoked on behalf of OS. Because KITL.dll is loaded into virtual space, I need to convert bus address into virtual address. I am doing that by calling two functions as below HalTranslateBusAddress which returns 0x0 in â??AddressSpaceâ?? and system physical address in â??TranslatedAddressâ??. Because I am using memory base I need to call MmMapIoSpace with TranslatedAddress returned in HalTranslateBusAddress call to get the system virtual address. Somehow MmMapIoSPace return same virtual address as physical address. And when I use that returned virtual address accessing my hardware(NIC) it cause my machine to reboot. I have seen sample code for KITL and found that all KITL driver uses IO base and not memory base for accessing PCI/PCIe hardwares. I am not sure where I am going wrong? Kindly suggest me. Thanks Sincerely, Tushar Dave Tag: SwMixer error Tag: 113265
  - 7
    - UI proxy helper dll Can any one suggest me any example for using UI proxy helper dll.. Thanks in Advance regards Muku Tag: SwMixer error Tag: 113263
  - 8
    - "The file exists" Windows CE 5.0 and Windows Server 2008 Hi everyone, I'm working with windows CE 5.0 Operating System and Windows Server 2008. When I try to map a windows ce drive with Remote Desktop Connection application and open it in windows explorer terminal server session I'm getting this error message: "\\tsclient\files\hard disk is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The file exists." All folders and units are listed, but I can not access to them. With the same Windows CE 5.0 and Windows Server 2003 I don't have any problem. I hpe you can help me with this, thanks. Tag: SwMixer error Tag: 113261
  - 9
    - how to use BTSCOSND Hi All, I have to read the bluetooth audio received in the BTSCOSND dll and play it . Can someone please explain me how use the BTSCOSND dll APIs ? In Readme.txt of btscosnd it has been mentioned that see BTHAUDIO for how to utilize the dll but I couldn't find the BTHAUDIO anywhere . Regards, Gurubasavaraja Tag: SwMixer error Tag: 113257
  - 10
    - SDK Hi I created an SDK for an image made of an Internet Appliance Design template, with an AT91RM9200EK BSP. The SDK was successfully created and it is listed in the list of available SDKs in VS2005. I tried to create a VC++ Win32 Smart Device Project with this SDK, but on doin so, nothing happens. Not even the automatically generated code thats supposed to come,appears. Did something go wrong in the SDK creation? Is there a way to rectify this problem? Thank you. Toby. Tag: SwMixer error Tag: 113256
  - 11
    - How to create(link) sdcardlib.lib and sdbus.lib for sdcard driver in WinCE600? Hi: we are moving our BSP from Ce5.00 to Ce6.00. when PB6 comiple the scdcard driver it can't not find the sdcardlib.lib and sdbus.lib. how could i create these 2 libs or link another way? hope anyone can response soon. Thanks and Best Reagrds. vincent tsai Tag: SwMixer error Tag: 113248
  - 12
    - How to Print only the current Frame? The environment is: WinCE 6.0 + R2, IESample. By default, IESample prints the whole page, but I need to print only contents the current frame of a webpage with multiple frames, how? If that's difficult, how can I print only selections? regards, Hou Tag: SwMixer error Tag: 113245
  - 13
    - ms_serial driver Hi, I am porting the mainstoneii serial driver to my platform (wince5, pxa270 based on mainstoneii) for FFUART. I enable the interrupt as GetRegister()->Write_IER(bIER | BUL_SERIAL_IER_UUE); When the serial driver load, after it excuted the above function, there is a lot of event message print infinitely. 0x87d5e000: ms2_serial:IsDebugSerialPort(x40100000): BSP_ARGS@x000d0000, dbgSerPhysAddr=x40700000 0x87d5e000: Will Go inside CBulPdd16550::Init() 0x87d5e000: No DMA Support 0x87d5e000: Configuring Pinout 0x87d5e000: Enable FFUART Clock 0x87d5e000: Enable interrupts and UART to take care of rx data without COM_Open(). 0x87d5e000: Postinit - EN Interrupt 0x87d14400: #### EV_CTS changed#### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### MS_RLSD_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### MS_RLSD_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### MS_RLSD_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### MS_RLSD_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### MS_RLSD_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### MS_RLSD_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### MS_RLSD_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### MS_RLSD_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### MS_RLSD_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### MS_RLSD_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### MS_RLSD_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### Is there something wrong in my BSP or the hardware itself? Best regards, J Tag: SwMixer error Tag: 113243
  - 14
    - Memory Map Setting (config.bib and image_cfg.h...) Hello. Anyone who knows about image_cfg.h(inc), config.bib, AddressTable, virtual address, physical address and etc? I can find some articles about each of them, but cant get the whole picture of the system. Memory map setting is very confusing and driving me crazy. Please, help me to know the concept of windows ce memory map. If anyone knows about any article or is willing to explain it, I will really appreciate it! Thanks! From KidsReturn!! -- Engineer (Developing Windows Mobile PDAs) Message posted via PocketPCJunkies.com http://www.pocketpcjunkies.com/Uwe/Forums.aspx/wince-pb/200806/1 Tag: SwMixer error Tag: 113242
  - 15
    - CLICK HERE TO KNOW MORE ABOUT MICROSOFT CLICK HERE TO KNOW MORE ABOUT LATEST IN MICROSOFT http://polticsinfs.blogspot.com/ Tag: SwMixer error Tag: 113240
  - 16
    - Intel Embedded Graphics Driver We are trying to configure the Intel embedded graphics driver (both IEGD 8.0 or 9.0 BETA) for Windows CE 6.0 and directX mobile. The target resolution is 1200X768 but we have also tested 1024x768 and 800x600. To date we have attempted a variety of static and dynamic video memory configurations. Our gut feeling is we prefer a static memory configuration but at this point a working video driver is first priority. Using D3DMobileDoctor we have confirmed that our target device is running the IEGD driver but the d3dm properties do not meet expectation. Mainly, there are discrepancies between d3dm properties using the default flat driver and IEGD (max simultaneous textures among others). Biggest issue is we are unable to render a d3dm texture with a simple sprite application. Load texture and sprite draw calls do not produce errors, but texture is not rendered to screen. Same application successfully renders texture to screen using x86 emulator and the default flat display driver. The last data point is we are able to render a shaded triangle using drawprimitive and rotate triangle by changing perspective with IEGD. So it seems like all the test results are pointing to a video memory or d3dm texture issue. Probably a memory configuration problem in a .bib or .reg, but we just have not had any success changing the configuration. Also we have run a more complex D3D application on same device in Windows XP (GMA driver) with great results. We think we should see similar performance between IEGD and GMA driver using basic d3dm functionality (in terms of MAX simultaneous textures, frame rate, sprite support)?. Does anyone out there have any experience with this driver and configuring it? Does anyone out there have any experience creating a CEPC with direct-x support I might be able to let my app developers use until I can work out the issues with our target hardware? Thanks in advance to anyone who can offer some advice. Tag: SwMixer error Tag: 113239
  - 17
    - Migrating BSP from 4.2 to 5.0 ? Dear Friends, I got S3C2410 development kit with Samsung 2410 processor . I have Platform Builder v5.0 and Windows CE v5.0, but the BSP supplied with the kit is for v4.2. I have refer MSDN and internet but couldn't able to find any useful information related to migration. What are the changes required to migrate bsp to 5.0 compatible? Have a Good Day ahead.. Thanks, Ankur. Tag: SwMixer error Tag: 113238
  - 18
    - Pxa255 to PXA270 porting... Hi all, After working on PXA255 BSP, it is time for me to move to PXA270. I got a board with almost all the peripherals and even gpio connections same as that of my pxa255 board. My pxa255 board is running perfectly with wince 5.0.. Now, the difference between the new board and my old pxa255 board is only processor PXA270. So, i am planning to use the same bsp here too with some changes only on the processor side. Can any one give me a suggestion and main difference that i need to add or make to my existing bsp, so that it will run without any problems on pxa270. I have found the following changes betwen 255 and 270 up to my knowledge, -->Interrupt architectures are different. But still i am planning to use the icip for detecting the interrupt.. Is that ok? or i have to use ichp. --> I left registers memory mapping to be same. since i found the addresses of registers are almost same as that of pxa255 in pxa270. Only thing is, some extra registers are added. Since i am not going to use those, mapping it is useless i think. --> The same case for RTC too. --> Kern, kernkitl, kernprof are linked with oal_cache_pxa250.lib, now i am planning to link it with oal_cache_pxa27x.lib My hardware is yet to come. Have i missed anything, to modify in my existing bsp ? if any one has tried porting 255 bsp to 270.. please help me if i have missed something... All suggestions are welcome... -- Ramesh.c Innovate Sofware Solutions. Bangalore. Tag: SwMixer error Tag: 113236
  - 19
    - usb legacy support Hi, Why we need to disable usb legacy support??? In some boards without disabling the usb legacy support it works and in some other boards it doesn't and some times it works in wince 5.0 and not in wince 6.0. I have seen the o.s is getting hanged at loading the usb drivers when the usb legacy support is enabled. I would like to know what exactly make to happen this? If anyone know it please share!! Thanks in advance Tag: SwMixer error Tag: 113228
  - 20
    - Different interfaces for display driver power management? CE6.0 There appears to be three different interfaces available for power managing a display driver: 1. The full power manager interface through IOCTL_POWER_CAPABILITIES, etc. (advertised on driver initialisation through the PMCLASS_DISPLAY GUID) 2. A second quite similar interface, specific to display drivers, implemented through the escape codes SETPOWERMANAGEMENT / GETPOWERMANAGEMENT and 3. The very basic on/off interface which is exposed through GPE::PowerHandler(). Am I right in thinking that if my driver implements full power management (i.e. option 1 above) then I don't need to bother with the other two interfaces? I could obviously implement the other interfaces as wrappers for my full power management interface, but is this just redundant coding and will it ever be called? In fact, which module uses these other interfaces? Thanks, Andrew. Tag: SwMixer error Tag: 113225
  - 21
    - usb legacy support Hi all, I am using geode lx bsp; in wince 5.0 wince boots up fine without disabling the usb legacy support in the bios, but in wince 6.0 it is hanging. Could anyone tell me how to disable the usb legacy support?? If i disable the usb legacy support in the bios then the o.s boots up fine otherwise it is hanging in the middle. please help!! I wanted to disable the usb legacy support in the o.s level not in the bios chipset: cs5536 wince 6.0 Thanks in advance. Tag: SwMixer error Tag: 113221
  - 22
    - OID_PNP_ADD_WAKE_UP_PATTERN Hi, I am using smsc9118 nic driver for my pxa270,wince 5.0 device.i am writing an application to set a wake up pattern for arp and code is as follows.The problem is that i am not able to get the correct masksize,patternoffset,patternsize,..etc in the ethernet driver.i am always getting the error. A device attached to the system is not functioning. ERROR_GEN_FAILURE .One thing i noted is that while loading my ethernet driver it is getting some pattern and coming to OID_PNP_ADD_WAKE_UP_PATTERN. can you please help me . void ByteMask(DWORD,BYTE*); UCHAR SetBuffer[sizeof(NDISUIO_SET_OID)+sizeof(DWORD)]; typedef struct _WAKEUP_FRAME { NDIS_PM_PACKET_PATTERN PmPattern; BYTE Byte_mask[6]; DWORD dwPattern[24]; }WAKEUP_FRAME; WAKEUP_FRAME WakeFrame= { {0x0,0x0,0x6,0x1E,0x15,0x0}, {0,2,03,0,0,0}, {0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x08,0x06,0x0,0x00,0x00,0x00,0x00,0x00,0x00,0x01} pSetOid = (PNDISUIO_SET_OID)&SetBuffer[0]; pSetOid->Oid = OID_PNP_ADD_WAKE_UP_PATTERN; // Custom OID; pSetOid->ptcDeviceName = DeviceName; // You dont need this once you *((ULONG *)(pSetOid->Data)) = (ULONG)&WakeFrame; RETAILMSG(1,(TEXT("Wake Frame Adress=%X \r\n"),&WakeFrame)); hNdis = CreateFile(NDISUIO_DEVICE_NAME, GENERIC_READ | GENERIC_WRITE, FILE_SHARE_READ | FILE_SHARE_WRITE, NULL, OPEN_ALWAYS, 0, NULL); bResult = DeviceIoControl (hNdis, IOCTL_NDISUIO_SET_OID_VALUE, (LPVOID) pSetOid, sizeof(NDISUIO_SET_OID) + sizeof(WAKEUP_FRAME), NULL, 0, &dwBytesReturned, NULL); dwErr=GetLastError(); if (bResult == FALSE) { RETAILMSG(1,(TEXT("Failed to set Wake up Frame for ARP, Error Code=%X \r\n"),dwErr)); } Tag: SwMixer error Tag: 113220
  - 23
    - Video processing Hi, Can anyone please give me any direction concerning the following? I have a video front-end on my platform (TVP5150) that produces normally YUV parallel data. Because I also need the video lines that are outside the visible frame (teletext data), I have to switch to raw video data to have it all. Both the iMX27 (multimedia arm) and TVP5150 do support RAW video. Normally the process syncs on the YUV data (SAV, EAV markers in the record), but in RAW mode I guess I need the external horizontal and vertical sync? Do you have any experience with this, or any hints to get it up and running? -- Maarten Tag: SwMixer error Tag: 113211
  - 24
    - OMAP3, WinCE Hi, I want to use winCE6.0 to bring up OMAP3430 hardware. Does WinCE6.0 support ARM cortex ? If not, say if we go for porting the same WHich version of ARM bsp I should consider from WinCE6.0 ? Please suggest the same. Regards ---Visalakshmi.S. 0091 9945278740 Tag: SwMixer error Tag: 113209
  - 25
    - FREE Tutorials on HTML XHTML CSS JavaScript XML XSL ASP SQL ADO access all computer tutorials for free visit http://freecomputertutorialz1.blogspot.com/ Tag: SwMixer error Tag: 113207

Hi All,

I am getting the following message

SwMixer: WaitForBuffer failed. Audio driver missed interrupt?

and I have searched for it in various combinations but cant seem to find it
anywhere in the code.
Anyone know where I can find out where the code is that outputs this message
? Do I only have binary code for this one ?

Thanks,

Joe W

Top

Re: SwMixer error by Michel

Michel
Sat Jun 14 18:58:19 PDT 2008

Yes, only in binary. Very annoying and I know several people have
already asked MS to release source for this, but unfortunately not yet...

Good luck,

Michel Verhagen, eMVP
Check out my blog: http://GuruCE.com/blog

GuruCE Ltd.
Microsoft Embedded Partner
http://GuruCE.com
Consultancy, training and development services.

Joe Welfeld wrote:
> Hi All,
>
> I am getting the following message
>
> SwMixer: WaitForBuffer failed. Audio driver missed interrupt?
>
> and I have searched for it in various combinations but cant seem to find it
> anywhere in the code.
> Anyone know where I can find out where the code is that outputs this message
> ? Do I only have binary code for this one ?
>
>
> Thanks,
>
> Joe W
>
>
>

Top