Registry error for Windows Media Player

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - "The system cannot find the path specified" in PlatformBuilder Win Hi, I'm trying to create the 'emulator' example out of the 'Welcome to Windows CE 5.0 > Tutorials > Tutorial: Building a Run-Time Image for the Emulator' tutorial. Everything goes well until i hit 'Build and Sysgen'. Platform builder doesn't even start and gives the following message : ==== --------------------Configuration: Emulator: x86_Debug-------------------- Starting Build: blddemo ============== The system cannot find the path specified CEPC0 - 1 error(s), 0 warning(s) ==== Additional info : Win2000 on 'drive D:', WinCE5 installed on an empty 'drive G:' Any suggestions on what can be wrong ? Thanks in advance, Joost. Tag: Registry error for Windows Media Player Tag: 80824
  - 2
    - Problem with the remote tools on the Windows CE .NET Default Platform Hello everyone, I work on a platform that I have create, but I can't use the remote tools on it. They couldn't connect to the default device. What's the problem? Thanks in advance. Antoine Tag: Registry error for Windows Media Player Tag: 80810
  - 3
    - Make a fsd restricted to a directory Hello everyone, I would like to create a fsd which acts only on a given file. How do I have there to be caught? Thank you in advance of your assistance. Antoine Tag: Registry error for Windows Media Player Tag: 80809
  - 4
    - Error in creating image with RAS component added I am using PB5.0, and I had created a simple image containing serial ports, and other minimal stuff required for my use. Later on, I needed to have RAS and PPP included in my image so that I can have my device connect to a GPRS network via a GPRS modem. Now, when I added the required components for RAS and PPP, and I try to build the image, I get an error saying "failed or do not know how to make ppp2lcp.lib". On investigating the problem, I found that I had this lib in the \Lib\x86\Debug but it was missing from the Retail folder. I tried using a copy of the debug version, but ran into other errors. I then tried build the private source code provided. While building this the compiler failed to find files md5.h, rc4.h, and so on, and hence I could get the required libs made. I do not understand why these files are missing on my PC. Has anyone faced sch problems? How do I resolve this issue? Please Help!!! Thanks Tag: Registry error for Windows Media Player Tag: 80808
  - 5
    - cf card reading in eboot as far as i remember there's a BSP came with pb5.0, with a ability of reading fat formatted CF card. or my memory was wrong? Tag: Registry error for Windows Media Player Tag: 80802
  - 6
    - off load nk.bin to msystem DOC hello, currently I am making my nk.bin a ram based image, and I load it from mdoc to ram in eboot and run everything in RAM. I am thinking about to make my nk.bin smaller by moving driver/application files to msystem DOC fat partition. and the system load them from disk as needed. in this case... 1 compared with NOR flash I lose XIP, ram usage is going down from pure ram image anyway 2 files stored in fat partition is freely copy-able!! 3 I have to give up the bib files and gather needed files on my own. 4 app start up time is slower is there anyone who has experience on this? or is a ce pc similar in the case(harddisk vs msystem DOC chip) ? and how about the CE license? do I have to protect the system (ms) files from being copyied out of the device? Tag: Registry error for Windows Media Player Tag: 80801
  - 7
    - How to "Use CodeClip to get the Tux_Custom_Test | TuxCode source" Dear all, I am leaning the "How to develop and test device drivers in windows CE 5.0"(http://www.windowsfordevices.com/articles/AT5839010990.html). One step in the procedures is "Use CodeClip to get the Tux_Custom_Test | TuxCode source". I am stuck here. The first problem is that the codeclip.exe cannot be downloaded although it is free. The second is where is the "Tux_Custom_Test | TuxCode source"? Please help! Thank you in advance! Sincerely, HWB Tag: Registry error for Windows Media Player Tag: 80799
  - 8
    - How to check if my microphone works? hi, I m using Platform builder with WINCE 4.2 .net frame work. i m having a VIPER board supplied by Arcom. for my application i want enable my microphone. how can i check if my microphone is enabled. is there any sample application which can do the audio capture.. i have written a sample application on VC++ for capturing audio thru microphone. this works fine on win 2000 and XP...but when i put it on my board. nothing happens... how can i test my microphone input. thank u, Tag: Registry error for Windows Media Player Tag: 80798
  - 9
    - Could you help me ? thanks all ! Ladies and Gentlemen: I want play flash in wince 5.0,so taht where component must be added? I am very glad if you would give me a hand. Yours Sincerely Liu Songhua Tag: Registry error for Windows Media Player Tag: 80797
  - 10
    - Could you help me ? thanks all ! Ladies and Gentlemen: I want play flash in wince 5.0,so taht where component must be added? I am very glad if you would give me a hand. Yours Sincerely Liu Songhua Tag: Registry error for Windows Media Player Tag: 80796
  - 11
    - about peghelp Hi, all I am transfering from ce.net 4.0 to 4.2, but met great problem when using peghelp. Here is what I called in my prog: CreateProcess(L"PegHelp.exe", L"\harddisk\myapp\myhelp.htm", NULL, NULL, false, 0, NULL, NULL, NULL, NULL); On ce.net 4.0, it runs without any problem, however, on 4.2 it always show the system's default help page, no matter how I change the file path. But in system's command line window, after I run "peghelp \harddisk\myapp\myhelp.htm", I can get the correct help window. What's wrong? Maverick Tag: Registry error for Windows Media Player Tag: 80795
  - 12
    - How to debug bootloader using ARM eXDI driver for Windows CE PB? From the help of Windows CE Platform Builder 4.2 I knew that bootloader can be debugged by eXDI hardware driver and then I downloaded the ARM eXDI driver for Windows CE PB from www.arm.com. But the help of Windows CE Platform Builder 4.2 don't detail how to debug bootloader using eXDI driver. Who can tell me what I should do to debug bootloader of WinCE? The target board is S3C2410. Thanks. Tag: Registry error for Windows Media Player Tag: 80793
  - 13
    - Missing Start Menu in WM5.0 Hi all, After the OS(WM5.0) boot up, "Start" button on the state bar(on the top of desktop)disappear, and the state bar,where "Start" button and battery state display, is transparent. Anybody can tell me why. And the overlay support is not enabled in my display driver. Dose it need overlay support? Thanks, Knight Lin Tag: Registry error for Windows Media Player Tag: 80792
  - 14
    - Suppress Wireless Network Available Popup Dialogue? By default this dialogue appears when a device is powered up with a mini PCI wireless card attached. You can check the box then close the form to prevent the dialogue from displaying. How do I suppress the display of this dialogue by default in Platform Builder? WinCE 5.0 Thanks Tag: Registry error for Windows Media Player Tag: 80789
  - 15
    - Root Certificates in CE 4.1 Were any root certificates made available in CE 4.1 ? I see them in CE 5.0, and they appear to get included in CE 5.0 by the inclusion of the the file sysroot.p7b and a registry key. I don't see anything like that in CE 4.1, and I can't seem to enumerate any items from the Root or CA system stores, although the help says that SCHANNEL has a bunch included. Tag: Registry error for Windows Media Player Tag: 80782
  - 16
    - IsAPIReady(SH_SHELL) and shell components I am launching two applications via the Init registry key. The first is a simple test application and the second is my "shell" application "Launch70"="a2test.exe" "Depend70"=hex:0a,00,14,00,1e,00 "Launch80"="a2man.exe" "Depend80"=hex:46,00 All was good in the universe. Then I decided to add a PropertySheet to my test app. I now get an exception because some serivice is not available. Since I do not know how to determine what it is trying to use, I added the IsAPIReady(SH_SHELL) at the beginning of my test application. It NEVER becomes ready! It would seem that this is also a very obscure, or at least poorly documented, part of CE. If I run the explorer shell and then lauch my application it runs fine. Are the common controls dependent on Explorer.exe? Somewhat related is the fact that if I do not include the AYGSHELL API component the control panel applets do not show any of their windows controls! What sets the IsAPIReady(SH_SHELL)? And just as importantly how can I determine what magic component I am lacking when I get an Invalid System Service exception? Tag: Registry error for Windows Media Player Tag: 80771
  - 17
    - WinCE5.0 - Hive Registry Hai everyone, Subject: WinCE5.0-Hive Registry First i built a platform with normal default registry it works fine. then i tried to configure the hive based registry. To configure a hive registry i did the following 4 steps, build with 0 errors. but when i try to connect to target machine, image downloaded to machine, after the i did not get the desktop(no response).I am not sure about system.hv and user.hv files creation, so i did not placed any such files in the specified registry directory, but i created the directory"Storage Card\config". do i have to place sytsem.hv, user.hv file there, if so how to do that, if not what is the issue? we are using X86, DiskOnChip2000. KINDLY help me out. Regards Sunny steps 1)Add hive resgistry from catalog to OS 2)EnvironmentVariables FILESYS_FSREGHIVE=1 BSP_MSYSTEMS_DISKONCHIP=1 3)common.reg ; @CESYSGEN IF FILESYS_FSREGHIVE ; HIVE BOOT SECTION [HKEY_LOCAL_MACHINE\init\BootVars] "SystemHive"="Storage Card\\config\\system.hv" "ProfileDir"="Storage Card\\config" ; "Flags"=dword:0x00000001 | 0x00000002 "Start DevMgr"=dword:1 "DefaultUser"="TBATM" ; END HIVE BOOT SECTION ; @CESYSGEN ENDIF FILESYS_FSREGHIVE 4)DiskOnChip.reg @CESYSGEN IF CE_MODULES_DEVICE ; HIVE BOOT SECTION IF BSP_MSYSTEMS_DISKONCHIP [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\TrueFFS] "Index"=dword:1 "Dll"="TrueFFS.dll" "Prefix"="DSK" "Order"=dword:1 "Ioctl"=dword:4 "WindowBase"=dword:D4000 "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" "Flags"=dword:1000 [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC] "Name"="DiskOnChip M-Systems" "Folder"="Storage Card" "DefaultFileSystem"="FATFS" MountAsBootable=dword:1 ENDIF BSP_MSYSTEMS_DISKONCHIP ; END HIVE BOOT SECTION ; @CESYSGEN ENDIF Tag: Registry error for Windows Media Player Tag: 80763
  - 18
    - How to use HP-Ipaq-H5550 as developper platform ??? Hi, I have an Ipaq-H5550 and want to replace the system. The current system is: OS version: CE 4.2 Product ID: Pocket PC My question is if I can use and how - platform builder 5.0 and replace the system. I tried to figure it where the nk.bin are. Thanks, David Tag: Registry error for Windows Media Player Tag: 80761
  - 19
    - Bluetooth Virtual com port There is something I don't understand about how the Bluetooth virtual com port works. I have a Bluetooth module that interfaces with my CPU via a standard uart RX an TX. I am using the BT stack w/integerated UART driver (SYSGEN_BTH_UART_ONLY) I have the hardware interface working and I use COM4 as my assigned CPU to BT module interface. I can see the HCI commands/responses come out/in on COM4. Next I would like now to establish a virtual COM port connection to my desktop. All the PB BT sample tests show specifing server or client, BT address and com index as command line parameters. When I use "4" as the com index it fails. I assume because the com port is already open (from the btd initialization on powerup). What am I missing? Tag: Registry error for Windows Media Player Tag: 80759
  - 20
    - My serial ports don't work sometime! I have bought several PCM-3350 boards from Advantech. I find that it's serial port can't work sometime,but i can't repeat this problem. After this happened, i solved this problem by setting default BIOS value. I do not know why it is. Please help me! thanks! Tag: Registry error for Windows Media Player Tag: 80758
  - 21
    - No "Unidentified USB Device" Pop-up We are using CE 5.0 with a VIA BSP on proprietary X86 hardware with multiple USB ports integrated. Although the OS platform and ports work as expected in most circumstances, they do not work as expected in all circumstances. In particular, when I connect a USB device that has no platform driver support, I would expect a "Unidentified USB Device" pop-up but none is displayed. Does CE 5.0 still implement this pop-up and if so, in what code? Thanks Tag: Registry error for Windows Media Player Tag: 80756
  - 22
    - Afxmessagebox() not working i am working on cepc platform using enterprise webpad as design template. I have written an mfc application using evc 4.0 .it was working fine on the cepc.But afterwards i added some some catalog items related to storage devices ,Irda and voip.Now my application is working fine but my menu bar is showing numbers along with the menu items and my message boxs have disappeared .when i run in debug mode the application gives me degub check failure where ever statements relating to messageboxs are written.i again made a clean build ,but the problem still persists.I am not able to find out why the messageboxs are giving me debug check failure. Tag: Registry error for Windows Media Player Tag: 80753
  - 23
    - How to check if my microphone works?? hi, I m using Platform builder with WINCE 4.2 .net frame work. i m having a VIPER board supplied by Arcom. for my application i want enable my microphone. how can i check if my microphone is enabled. is there any sample application which can do the audio capture.. i have written a sample application on VC++ for capturing audio thru microphone. this works fine on win 2000 and XP...but when i put it on my board. nothing happens... how can i test my microphone input. thank u, Tag: Registry error for Windows Media Player Tag: 80752
  - 24
    - to .exe, .dll, or .lib? Dear all, I am quite confused about which one( exe, .dll, or .lib) to compiled to which each of the modules in PB. How is this decided and how the different 3 typed are linked to final OS image? If I want to add some driver module, which one should I choose? Thank you! Best Wishes, HWB Tag: Registry error for Windows Media Player Tag: 80745
  - 25
    - FTP Server for Windows CE 5.0 Hi all, Is it possible to know if exist an FTP Server for Windows CE 5.0 ? Thanks for your answer Stefano Tag: Registry error for Windows Media Player Tag: 80744
- Next
  - 1
    - Porting a driver from WinCE 4.2 to 5.0 (CodePalette) Hi everyone, I successfully developped a driver on WinCE 4.2 (I used CodePalette to generate the template). Now i'm willing to have it work on WinCE 5.0. I figured I could just compile it under Platform Builder 5 and see what appends, but ... nothing appends. My DllEntry is not even called. Is there major changes I should apply ? Have anyone already made a WinCE 5.0 driver using CodePalette ? I can't even have the template working. Thanks anyone who could help me. Edouard Dessioux Tag: Registry error for Windows Media Player Tag: 80742
  - 2
    - TUI for CS call 1. Can the Telephony User Interface framework be used for CS call and not VoIp call. 2. Is there any default Dialer application on WinCE-5.0 Tag: Registry error for Windows Media Player Tag: 80741
  - 3
    - Forcing Application to RAM without Paging I'm working on a device that has NAND, so no XIP. Unfortunately, at this point, the FMD for the NAND is extremely slow, with a maximum throughput of around 2.5MB/s, and optimizing it is not an option (for non-technical reasons at this point). Because it is so slow - application startup and paging operations are very slow (relative to similar devices). Because of this, I'm looking for some ways to make critical applications XIP out of RAM. At the lowest level conceptually - at boot time I want critical applications and DLLs copied into RAM so they don't have to be demand paged from the slow FLASH. Has anyone tried this - any helpful hints on how to accomplish - or other thoughts? Thanks, -Chris Tag: Registry error for Windows Media Player Tag: 80735
  - 4
    - LAN91C111 on XSC1BD Hi, I'm porting Windows CE 4.2 XSC1BD BSP to a board based on Lubbock. This board has all features of Lubbock (It has an FPGA that maps all Lubbock Peripherals). The main difference between this board and Lubbock is the Ethernet Controller. The board I'm working has a SMSC LAN 91C111 Ethernet Controller. I'm trying to port the Eboot to this board. I already have the LAN 91C111 ETHDBG driver ported to Windows CE 4.2. And it is working in another board. The Ethernet Controller is mapped on nCS3 (0x0C00_0000), like Lubbock. And I gave a offset of 0x300 the access it (The registers offset for SMC 91C111). Without this offset the driver didn't detect the Ethernet Controller. To put this detecting the Ethernet Contoller I change the MSC1 register from 0x3FF1A441 to 0x3FFCA441, changing from SRAM to VLIO. But when I try to apply it the driver in the board I am working now it appears to start ok, but it does not communicate well. The driver detects the Ethernet Controllet ok on SMCInit() routine, but It appears to fail on SCMSendFrame() or SMCGetFrame() routines. For example: If I put DHCP Enabled on the bootloader, the board gets the IP from server. Then it starts to send BOOTME messages, but Platform Builder does not detect it. So, if I put DHCP Disabled and configure IP Manually, when the board starts do send BOOTME messages, Plaform Builder detect it. But does not download the image. I know that this board is working with all features ok on a Linux Kernel 2.6.11 based on Lubbock Configuration, just changing the driver for Ethernet Controller. Thanks, Marcelo Fornazin Tag: Registry error for Windows Media Player Tag: 80729
  - 5
    - PB 5.0 BSP Export Wizard error In the Export Wizard I get to see following missing when pushing the 'Finish' button of the wizard: "Unable to initialize the .msi generator because a required component might be missing or damaged. Please reinstall Platform Builder" Anyone an idea which components PB is talking about? Thanks, Wesley Tag: Registry error for Windows Media Player Tag: 80719
  - 6
    - a strange issue about smdk2410 Hi, I have a Sumsung 2410 evaluation board, and I use smdk2410 BSP. When I use touch screen to suspend os , after resume, the system will die. If I use mouse or key to suspend os, everything is OK. Have somebody meet this issue? Can somebody give me some advice? Thank you. Andy Tag: Registry error for Windows Media Player Tag: 80716
  - 7
    - How to add resource information (FileVersion, Productversion, etc.) to nk.bin Hello, is it possible to add a resource script file (.rc file) to the platform builder project in order to add FileVersion, ProductVersion etc. information to the nk.bin built? I have a PB (WinCE 4.20) project including a user feature dll project. When I add a resource script file the information entered in this file are attached to the dll built by the user feature project and not to the nk.bin file. How can I get these information into the nk.bin? Thanks in advance. Gunnar Tag: Registry error for Windows Media Player Tag: 80710
  - 8
    - RDP sound playback (WinCE5.0) Hi, I'm developing a thin client in CE 5.0. When I start a .WAV sound file playback in an RDP session (Windows XP host, Media Player 9) and bring it to the client (AudioRedirectionMode=0), using a 10 Mbit/s connection the song will play, but sometimes it will stop for a few seconds and then continue to play. Using a 100Mbit/s connection, I will hear one or two beats of music after some time or nothing at all. Does anybody have an idea, how to overcome this behaviour and play the sound continuously especially using the 100 Mbit/s connection. Anne Tag: Registry error for Windows Media Player Tag: 80708
  - 9
    - insertion of a 32-bit cardbus card get a detection of a 16-bit card Windows CE 5.0 with a TI1520 PC card controller. I have two 32-bit cardbus cards being workable on PC. However, when I inserted any of them into one of the TI sockets, the "Present-State" register associated with the socket showed a value of dwPStateReg = 0x30000910. According to TI's manual, this value indicates that the socket supports 3/5 voltages and detected a 16-bit card in the socket. After that, the MDD showed the following messages. pcc_serv.DLL : CreatePCCardEnabler 16 Bit PCMCIA Card !!! and CPCPcmciaCard::GetConfigureRegisterBase: Can't get PCMCIA register address. return FAILS Does anyone experience the same? Tag: Registry error for Windows Media Player Tag: 80707
  - 10
    - USBSerialFn : dwMaxTransferSize only set to dwMaxPacketSize because of WCEUSBSH bug ? Hi, In the \wince500\public\common\oak\drivers\usbfn\serial\usbfndrv.cpp file, in the USBSerialFn::CableAttached function we see the source code mentioning a "WCEUSBSH Bug". See the code snippet below. Code Snippet : >> >> void USBSerialFn::CableAttached() { .. DWORD dwBulkSize = (m_CurrentSpeed == BS_HIGH_SPEED? g_HighSpeedEndpoints[BULK_IN_DESCRIPTOR_INDEX].Descriptor.wMaxPacketSize: g_FullSpeedEndpoints[BULK_IN_DESCRIPTOR_INDEX].Descriptor.wMaxPacketSize); .. OpenBulkOut(m_hDevice, m_pUfnFuncs,uEdptAddr,TRUE,dwBulkSize, dwBulkSize, 4); // WCEUSBSH Bug. Only can usb MaxPacketSize .. << << The result is that the PDD has to complete transfers more frequently. I wondered if this was a bug of WCEUSBSH that had gotten fixed already, so I tried changing the call to OpenBulkOut to specify a larger dwMaxTransferSize parameter (4K buffer) : OpenBulkOut(m_hDevice, m_pUfnFuncs,uEdptAddr,TRUE,dwBulkSize,/*dwBulkSize*/4096, 4); The result is that it more than doubles our bulk out transfer speed. (simply because the MDD doesn't have to complete so many transfers any more I guess) I am wondering now if others have seen the same thing ? Can you try ? And better yet, can Microsoft confirm whether or not this indeed is a bug in WCEUSBSH that got fixed ? I do not seem to have any issues with my ActiveSync 4.1.0 (Build 4841). Let me know. Thanks -- Ronald Tag: Registry error for Windows Media Player Tag: 80701
  - 11
    - where is the source file of btd.dll and btdrt.dll Hi everyone: Does somebody know where is the source file of btd.dll or btdrt.dll ? I use platform builder for WinCE 5.0. Best regards Sam Tag: Registry error for Windows Media Player Tag: 80697
  - 12
    - USB Serial not working on WinCE 5.0 XSCALE Lubbock-based version of WinCE 5.0 is finally running, but I'm not able to get my USB Functional port working. In version 4.2 I had USB Functional without serial client working. It turned up as a "Windows CE device" on my PC. The USB structure has changed considerably from 4.2 to 5.0, but fortunately I had the Lubbock 5.0 version as a good starting point. In 4.2 version I didn't have to do any changes to the USB driver part, only change the GPIO-pin for USB attach/remove in the interrupt handler. In 5.0 version I have added the catalog item USB Functional from my BSP, but now it requires me to add the item: Device Driver -> USB Function -> USB Function Clients -> Serial (colud choose Mass Storage or RNDIS Client). When I plug my device into the PC it stops and I get unknown device on my PC. Need some advice, anything I have forgotten or should be awear of? ; @CESYSGEN IF CE_MODULES_USBFN IF BSP_PXA25XUSBFN [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\xsc1bdusbfn] "Dll"="xsc1bdusbfn.dll" "Prefix"="UFN" "Priority256"=dword:73 ; must be lower-priority than RndisFn's transfer thread "EndpointCount"=dword:10 "SupportedSpeeds"=dword:2 "IoBase"=dword:a6800000 ; UDC_BASE_U_VIRTUAL "IoLen"=dword:1000 ; Needs at least 0xE04. Round up to 1 page. "Sysintr"=dword:1e "BusIoctl"=dword:2a0048 "IClass"=multi_sz:"{E2BDC372-598F-4619-BC50-54B3F7848D35}=%b","{6F40791D-300E-44E4-BC38-E0E63CA8375C}=%b" ENDIF BSP_PXA25XUSBFN ; @CESYSGEN ENDIF CE_MODULES_USBFN /trond Tag: Registry error for Windows Media Player Tag: 80694
  - 13
    - Serial PCMCIA Card . doesn't work?? HELP pb 5.0 ARM4 cpu, ti-pccard 1520 ( 2 sockets, one for pcmcia slot and the other for CF). The CF card is workable, after I added some registry values. [HKEY_LOCAL_MACHINE\Drivers\PCCARD\PCMCIA\TEMPLATE\PCMCIA] "Dll"="pcmcia.dll" "NoConfig"=dword:1 "IClass"=multi_sz:"{6BEAB08A-8914-42fd-B33F-61968B9AAB32}=PCMCIA Card Services" But the Ican't startup the Serial pcmcia card . Would you help to solve the problem ? .. Should I create any registry key? I found some registry keys below !! Does it affect my pcmcia card? .... ... [HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Detect\10] "Dll"="SERIAL.DLL" "Entry"="DetectModem" [HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Detect\41] "Dll"="pcx500.DLL" "Entry"="DetectPCX500" [HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Detect\50] "Dll"="ATADISK.DLL" "Entry"="DetectATADisk" [HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Detect\60] "Dll"="NE2000.DLL" "Entry"="DetectNE2000" [HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Serial] "DeviceArrayIndex"=dword:1 "Prefix"="COM" "Dll"="Serial.Dll" "ResetDelay"=dword:300 "IClass"="{CC5195AC-BA49-48a0-BE17-DF6D1B0173DD}" [HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Serial\Unimodem] "Tsp"="Unimodem.dll" "DeviceType"=dword:0 [HKEY_LOCAL_MACHINE\Drivers\PCMCIA\NE2000] "Dll"="ndis.dll" "Prefix"="NDS" "Miniport"="NE2000" [HKEY_LOCAL_MACHINE\Drivers\PCMCIA\CISCO] "Dll"="ndis.dll" "Prefix"="NDS" "Miniport"="Cisco" Below is the debug log.. 0x87d87000: OEMInterruptEnable: SYSINTR_GPIO_PCIB IRQ=7 SYSINTR=1e OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 30 0x87d87000: OEMInterruptEnable: SYSINTR_GPIO_PCIB IRQ=7 SYSINTR=1e OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 30 0x87d87000: OEMIoControl: IOCTL_HAL_ENABLE_WAKE not supported 0x87d87000: OEMInterruptEnable: SYSINTR_GPIO_PCIB IRQ=7 SYSINTR=1e OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 0x87bb0400: GetCardCRC: CardGetNextTuple returned fails 0x87bb0400: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\PCCARD\PCMCIA\INSTANCE\PCMCIA1\Prefix) returned 2 0x87bb0400: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\PCCARD\PCMCIA\INSTANCE\PCMCIA1\BusPrefix) returned 2 0x87bb0400: pcc_pcm.dll(PCMCIA.DLL) Init 0x87bb0400: ATADISK: PcmciaCallBack(CE_EXCLUSIVE_COMPLETE) 0x87bb0400: ATADISK: PcmciaCallBack(CE_CARD_INSERTION) 0x87bb0400: GetCardCRC: CardGetNextTuple returned fails 0x87bb0400: I_AdvertiseDeviceInterface: AdvertiseInterface({6beab08a-8914-42fd-b33f-61968b9aab32}, 'PCMCIA Card Services', 1) failed 183 0x87b8c400: CheckDll: NDIS.dll returns true 0x87b8c400: NE2000: DLL_PROCESS_ATTACH 0x87b8c400: DetectNE2000: DevType = 3, expected 6 0x87b8c400: NE2000: DLL_PROCESS_DETACH 0x87b8c400: CheckDll: NDIS.dll returns true 0x87b8c400: Cisco DLL_PROCESS_ATTACH Handle=0x87bce010 0x87b8c400: Cisco DetectCisco Routine Handle=0x5 0x87b8c400: Cisco DevType 3 Not Valid 0x87b8c400: Cisco DLL_PROCESS_DETACH OEMInterrupt: NKCallIntChain(IRQ=7) returns 30 0x87d87000: OEMInterruptEnable: SYSINTR_GPIO_PCIB IRQ=7 SYSINTR=1e OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 ... loop.... ... Tag: Registry error for Windows Media Player Tag: 80691
  - 14
    - Fast Infrared Driver CETK testing Hi, I have developed a Fast IR driver for ARM platform. I am able to transfer the files between my desktop and development board. Though I am not able to transfer bigger files(since I am not using DMA yet), I am successfully able to transfer files of small size. while trying to run the CETK test cases, I found that, all the connection oriented test cases are skipping, and I am just getting the result as SKIPPED: Unable to establish connection to IRTestServer. Following is the procedure I follow. I am running one board as server and I run the following commands s services stop obx0: s irapisrv22 It shows Creating AF_IRDA endpoint IRSRV waiting for connect... Another board I am using as client and I am running the following commands s services stop obx0: s tux -o -d irapi22 -f cesh:irapitest.log Following components are added SYSGEN_IRDA, SYSGEN_WINSOCK, SYSGEN_OBEX_INBOX(file transfer) I have got the same code, passing all the test cases. The only difference is, more components are added to the platform, power management is also introduced. Wrt to the code I didn't do any modifications. Is there anything I missed out. Any help will be greatly appreciated Thanks in advance Tag: Registry error for Windows Media Player Tag: 80687
  - 15
    - Turing for help: Could you give me a loading address of WINCE 3.0? Ladies and Gentlemen: Could you give me a loading address of WINCE 3.0? I am very glad if you would give me a hand. Yours Sincerely Liu Songhua Tag: Registry error for Windows Media Player Tag: 80682
  - 16
    - How to boot form DiskOnChip on Mainstone? Hi, Does anyone know how to set the Mainstone jumper so that the device can boot from DiskOnChip rather than internal flash? Thanks very much~ Tag: Registry error for Windows Media Player Tag: 80677
  - 17
    - WinCE: Problems including OEM help (.chm) files into Platform SDK Hi all, Having a bit of a problem that that has come up in the newsgroup archives (without any solution suggested) a couple of times before back in 2003-3. I'm trying to include a custom .chm help file into a SDK installer build via. the "Configure SDK..." dialog "Help" tab, as described in http://msdn.microsoft.com/library/default.asp?url=/library/en-us/wcepb40/html/pbtskaddingcustomhelpfilestosdk.asp, my file is included in the installer OK and written out with the other help files as part of the install, however it does NOT appear to be linked in to the SDK help presented in eMbedded Visual C++. Any ideas?? Thanks Richard Lang. Tag: Registry error for Windows Media Player Tag: 80675
  - 18
    - HELP: Debug causes exception but release is fine I am creating a Property Sheet test application for my device. When I copy the debug a2test.exe to the device and run it all is well! But, when I use PB and download entire image and try to debug, I get a First-chance exception in NK.EXE (0xC000001C: Invalid System Service) when calling PropertySheet() The pertinent lines from the Debug are PID:bd99fb2 TID:bd9eeae 0x8bd815c4: ObjectCall: Failed(1): 15 PID:bd99fb2 TID:bd9eeae 0x8bd815c4: RaiseException: Thread=8bd815c4 Proc=8a14de30 'a2test.exe' PID:bd99fb2 TID:bd9eeae 0x8bd815c4: AKY=00000081 PC=8822f668(NK.EXE+0x0002f668) RA=88229280(NK.EXE+0x00029280) BVA=00000000 FSR=00000001 And I am in RETADDR ObjectCall (POBJCALLSTRUCT pobs) When I try to pull up the call stack for my application it shows NK!ObjectCall(_OBJCALLSTRUCT * 0x1002ed88 {method=0xffffeae5 prevSP=0x00000000 mode=0x0000001f ...}) line 1231 NK!PrefetchAbort + 324 bytes NK!PrefetchAbort + 324 bytes NK!PrefetchAbort + 324 bytes . . . I set break points in all of my DialogProcs and it is croaking before reaching any of them. I don't even know where to go from here? Any help / suggestions appreciated. gerrit Tag: Registry error for Windows Media Player Tag: 80673
  - 19
    - NAND FMD with 10 byte ECC Hello, I am trying to determine if it is possible to create a NAND FMD driver that uses a 10 byte ECC algorithm for each 512 byte sector. Based on the WinCE 5.0 sample FMD drivers, I think there may not be enough room in the 16 byte spare area to save the 8 byte SectorInfo structure, the bad block marker, and 10 bytes of ECC data. MLC NAND suppliers recommend a 10 byte Reed-Solomon ECC strategy for each sector. Does anyone have an idea on how I can do this using the existing FAL? Thanks! Tag: Registry error for Windows Media Player Tag: 80672
  - 20
    - Google rendering in IE on CE 5.0 For some reason I have trouble with some web pages text rendering in the IE. One of the sites that suffers from this problem is google.co. for some reason the text looks squeezed, I tried adding all available font as well as change encoding and text size but it does not help. Is it possible that IE does not give the site the right screen proportions? Tag: Registry error for Windows Media Player Tag: 80671
  - 21
    - Wince device in windows network hi, Is it possible to have the CE device visible to other Desktop pcs while browser the local windows network. Can the CE device share files? What about the other way around, can the CE device display a list of all avilable pcs in the domain/workgroup? Tag: Registry error for Windows Media Player Tag: 80670
  - 22
    - Serial Activesync connexion Hi All, I created my OS image using Platform Builder 4.2. I try to make a serial activesync connection on a SH3 board. I can connect via Ethernet or Usb cable, but i have trouble with serial connection. In debug mode, it works very well. In release mode, I have a strange behaviour : on the PC side, Activesync displays "connecting" and its icon becomes green and rounds. On the device side, it says "User authenticated". I dont think the cable is bad because every thing is ok in debug mode. In release mode, I have no debug trace to easily identify the problem. Can anybody point me in the right direction to resolve this problem ? Thanks, Dom Tag: Registry error for Windows Media Player Tag: 80660
  - 23
    - Ethernet problem (Realtek) on GEODE I have built an image for CEPC with ethernet pci board (Realtek), put the image on HD and everything work perfect. I was able to debug my application (evc4) through ethernet. Then i have built the same image for GEODE (i have a board with geode and realtek inside). Put the image on HD. The Realtek is show and from my pc a can see the "conenction led" blinking and it seems that everything works. But when i try to debug my application (with evc4) after connecting with ActiveSync, i cannot use the ethernet, it goes only by serial port! What's wrong? Can someone help me? P.S. I use PB5 Thanks Roberto Tag: Registry error for Windows Media Player Tag: 80656
  - 24
    - Changeing SYSINTR_MAXIMUM I have a CE 4.20 Platform with a lot of Interrupt's (more then the 32 supported by InterruptInitialize()) is it possible to change SYSINTR_MAXIMUM or SYSINTR_MAX_DEVICES ? Tag: Registry error for Windows Media Player Tag: 80643
  - 25
    - Windows CE webserver how to use ActiveX controls/.NET controls/Java applets Hi folks, I'm currently using the HTTPD webserver in combination with the windows CE emulator. My goal is to access a windows CE HTTPD webserver HTML/ASP page using my desktop webbrowser and add some interactive content to that page by using an ActiveX control or a .NET control or a Java applet in the HTML/ASP page. I can access the web page from my desktop webbrowser (IE6) but I can't get any of the webpage components (ActiveX control or .NET control or Java applet) to be downloaded properly to the desktop PC. Here's some example HTML code i'm using: // ActiveX control in a signed cabinet file: <%@LANGUAGE="VBSCRIPT" CODEPAGE="1252"%> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <head> <title>TestASP</title> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"> </head> <body> <OBJECT ID="Nlview" WIDTH=100% HEIGHT=400 align="baseline" border="0" CLASSID="CLSID:F2C19A8B-3F1F-11D1-BEA3-008048EAD6C0" CODEBASE="nlview.cab#version=3,3,0,103"> <PARAM NAME="_Version" VALUE="65536"> <PARAM NAME="_ExtentX" VALUE="17886"> <PARAM NAME="_ExtentY" VALUE="12347"> <PARAM NAME="_StockProps" VALUE="4"> <PARAM NAME="Font" VALUE="Courier New"></OBJECT> </body> </html> // .NET control exposed from a dll file (control named 'DragListBoxCe' in // namespace 'CustomCeControls'): <%@LANGUAGE="VBSCRIPT" CODEPAGE="1252"%> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <head> <title>TestASP2</title> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"> </head> <body> <OBJECT id="List1" classid="ControlLibCe.dll#CustomCeControls.DragListBoxCe"> </OBJECT> </body> </html> // Applet <%@LANGUAGE="VBSCRIPT" CODEPAGE="1252"%> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <head> <title>TestASP3</title> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"> </head> <body> <APPLET name="javaClock" code="JavaClock.class" width=150 height=150> <PARAM name="fontsize" value="28"> <PARAM name="backcolor" value="black"> <PARAM name="fontcolor" value="red"> <PARAM name="hHandColor" value="green"> <PARAM name="mHandColor" value="green"> <PARAM name="sHandColor" value="red"> <PARAM name="hPointColor" value="red"> <PARAM name="mPointColor" value="lightgray"> <PARAM name="analog" value="true"> <PARAM name="dst" value="true"> </APPLET> </body> </html> I know that the HTML <OBJECT> tag is ignored by the CE webserver so I cannot use these objects in server side scripts (that's no problem for me because I only require these objects at the client side). I also read that HTML <OBJECT> tag behaviour is dependant of the webbrowser at the client side. Since the examples described above all work when I use 'em on a Windows XP IIS web server I'm pretty sure that the client side browser is ok One last thing: the logging of the Windows CE webserver logs HTTP status code 302 after a HTTP GET request where one of the files nlview.cab, ControlLibCe.dll, JavaClock.class is requested. I don't know why because they are present in the same virtual directory as the ASP page. Can anyone help me out or tell me if it's even possible what I'm trying to do? Thanks in advance, Greets, Eric Tag: Registry error for Windows Media Player Tag: 80642

Hi all,

I have a CEPC with following compoentns:
1) Windows Media Player
2) Waveform Audio

When I try to open a wave file from \Release folder, it gives and
error. One dialog box pos-up with following message.

"A registry entry is corrupt. (0x800403F2)"

What else is required?

Thanks in advance for your help.
Regards,
-milan

Top