Re:Different image download method

Tutorials Win: Microsoft Windows Forum

- Previous
 - 1
 - Build and Release SDKs? Is the SDK created with the Platform >Buld SDK command different when the build and release configurations are selected? I need to know if it should be run once for each configuration just as platform builds would be, or if the built SDK is the same for both. Tag: Re:Different image download method Tag: 59782
 - 2
 - Transcriber on top of RDP I am trying to use transcriber on top of RDP, but I got "Transcriber operation over Remote Desktop is not supported. See your system documentation for more information." I do not have any similar problem with ICA. Any hints to enable it on RDP? I am using CE 4.2. Thanks, John. Tag: Re:Different image download method Tag: 59776
 - 3
 - Different image download method Hello, I have a customized CE image that I created using Platform Builder. After I download and test the CE image to make sure it works, from the CE platform I have to copy NK.BIN from the 'Release' folder to the 'Hard Disk' folder in order to subsequently boot from that new image. Is there a way to tell Platform Builder to download the CE image to the 'Hard Disk' folder directly? Hardware currently: Parvus PC-104 board Also, what is the method of choice for copying a customized CE image to the device in a production setting? Thanks in advance. Edward Tag: Re:Different image download method Tag: 59766
 - 4
 - Buffer size for IssueBulkTransfer Our platform is a USB host and we have been experiencing problems with IssueBulkTransfer() when requesting a bulk in or out transfer of 1K or more in the drivers we are developing for a device. The problem is the same in CE 3.0 and 4.2 -we have not tried 5.0 yet. The call is made with lpvBuffer and uBufferPhysicalAddress set to zero. IssueBulkTransfer returns with zero bytes transfered and no action occurs on the bus. We suspect it has to do with exceeding the space available in an internal buffer, but do not understand why it is happening. Our use of IssueBulkTransfer are similar to those in the BOT.cpp and CBIT.cpp. We recently tried a USB Mass Storage Device and tried to copy files. A file of 622 bytes transferred correctly. The file of 2.5K hung the system. thanks Steve Tag: Re:Different image download method Tag: 59765
 - 5
 - Problem Cloning PUBLIC directory Hi Folks- I'm trying to clone the ATADISK driver from the PUBLIC tree of PlatformBuilder 5.0 and having some problems getting it to compile. Any help is greatly appreciated. I copied the files to a directory named ATADISK under PLATFORM\MyXscale\SRC\DRIVERS. I edited the sources file by changing the line: WINCETARGETFILE0=$(_COMMONOAKROOT)\lib\$(_CPUINDPATH)\$(TARGETDEFNAME).def to be WINCETARGETFILE0=$(_PROJECTOAKROOT)\lib\$(_CPUINDPATH)\$(TARGETDEFNAME).def When I try do compile using build -c, I get the following output (error message included). Any ideas what I'm doing wrong? I've also tried to compile the DLL directly by commenting out the DOSYSGEN line and get the output at the end. Thanks for any help. -Brian [output from building .lib file] C:\WINCE500\PLATFORM\MyXscale\SRC\DRIVERS\ATADISK>build -c Build for Windows CE (Release) (Built on Apr 22 2004 10:38:01) File names: Build.log Build.wrn Build.err Build.dat BUILD: [Thrd:Sequence:Type ] Message BUILD: [00:0000000000:PROGC ] Checking for \WINCE500\sdk\bin\i386\srccheck.exe. BUILD: [00:0000000001:PROGC ] SrcCheck exit code: 0 (dec). BUILD: [00:0000000002:PROGC ] Compile and Link for ARM. BUILD: [00:0000000003:PROGC ] Loading C:\WINCE500\PLATFORM\MyXscale\Build.dat. BUILD: [00:0000000004:PROGC ] Done. BUILD: [00:0000000005:PROGC ] Computing include file dependencies: BUILD: [00:0000000006:PROGC ] Checking for SDK include directory: C:\WINCE500\sdk\ce\inc. BUILD: [00:0000000007:PROGC ] Scan \WINCE500\PLATFORM\MyXscale\SRC\DRIVERS\ATADISK\ BUILD: [00:0000000010:PROGC ] Total of 0 pass zero files to compile in 1 directories. BUILD: [00:0000000011:PROGC ] Building generated files in \WINCE500\PLATFORM\MyXscale\SRC\DRIVERS\ATADISK\. BUILD: [01:0000000018:ERRORE] NMAKE : U1073: don't know how to make 'C:\sandbox\sw\x3v\wince500\x3vproj\WINCE500\MyXscale_ARMV4I\oak\lib\ARMV4I\debug\atadisk.def' BUILD: [01:0000000020:ERRORE] NMAKE.EXE -i -c BUILDMSG=Stop. NOLINK=1 PASS0ONLY=1 CLEANBUILD=1 failed - rc = 2 BUILD: [00:0000000021:PROGC ] Files Warnings Errors BUILD: [00:0000000022:PROGC ] Midl 0 0 0 BUILD: [00:0000000023:PROGC ] Resource 0 0 0 BUILD: [00:0000000024:PROGC ] Message 0 0 0 BUILD: [00:0000000025:PROGC ] Precomp Header 0 0 0 BUILD: [00:0000000026:PROGC ] C/Cpp/Cxx 0 0 0 BUILD: [00:0000000027:PROGC ] Assembler 0 0 0 BUILD: [00:0000000028:PROGC ] Static Libraries 0 0 0 BUILD: [00:0000000029:PROGC ] Dll's 0 0 0 BUILD: [00:0000000030:PROGC ] Exe's 0 0 0 BUILD: [00:0000000031:PROGC ] Resx 0 0 0 BUILD: [00:0000000032:PROGC ] Csharp Targets 0 0 0 BUILD: [00:0000000033:PROGC ] Other 0 0 2 BUILD: [00:0000000034:PROGC ] BUILD: [00:0000000035:PROGC ] Total 0 0 2 BUILD: [00:0000000036:PROGC ] BUILD: [00:0000000037:PROGC ] 0 Warnings, 2 Errors [output from building .dll file] C:\WINCE500\PLATFORM\MyXscale\SRC\DRIVERS\ATADISK>build -c Build for Windows CE (Release) (Built on Apr 22 2004 10:38:01) File names: Build.log Build.wrn Build.err Build.dat BUILD: [Thrd:Sequence:Type ] Message BUILD: [00:0000000000:PROGC ] Checking for \WINCE500\sdk\bin\i386\srccheck.exe. BUILD: [00:0000000001:PROGC ] SrcCheck exit code: 0 (dec). BUILD: [00:0000000002:PROGC ] Compile and Link for ARM. BUILD: [00:0000000003:PROGC ] Loading C:\WINCE500\PLATFORM\MyXscale\Build.dat. BUILD: [00:0000000004:PROGC ] Done. BUILD: [00:0000000005:PROGC ] Computing include file dependencies: BUILD: [00:0000000006:PROGC ] Checking for SDK include directory: C:\WINCE500\sdk\ce\inc. BUILD: [00:0000000007:PROGC ] Scan \WINCE500\PLATFORM\MyXscale\SRC\DRIVERS\ATADISK\ BUILD: [00:0000000010:PROGC ] Total of 0 pass zero files to compile in 1 directories. BUILD: [00:0000000011:PROGC ] Building generated files in \WINCE500\PLATFORM\MyXscale\SRC\DRIVERS\ATADISK\. BUILD: [00:0000000019:PROGC ] Scan \WINCE500\PLATFORM\MyXscale\SRC\DRIVERS\ATADISK\ BUILD: [00:0000000022:PROGC ] Compiling \WINCE500\PLATFORM\MyXscale\SRC\DRIVERS\ATADISK\ directory. BUILD: [01:0000000029:PROGC ] Compiling .\system.c BUILD: [01:0000000032:PROGC ] Compiling .\diskio.c BUILD: [01:0000000035:PROGC ] Linking C:\WINCE500\platform\MyXscale\lib\ARMV4I\debug\atadisk.lib BUILD: [00:0000000047:PROGC ] Linking \WINCE500\PLATFORM\MyXscale\SRC\DRIVERS\ATADISK\ directory. BUILD: [01:0000000054:ERRORE] NMAKE : U1073: don't know how to make 'C:\sandbox\sw\x3v\wince500\x3vproj\WINCE500\MyXscale_ARMV4I\cesysgen\sdk\lib\ARMV4I\debug\storeapi.lib' BUILD: [01:0000000056:ERRORE] NMAKE.EXE -i -c BUILDMSG=Stop. LINKONLY=1 NOPASS0=1 MAKEDLL=1 failed - rc = 2 BUILD: [00:0000000057:PROGC ] Files Warnings Errors BUILD: [00:0000000058:PROGC ] Midl 0 0 0 BUILD: [00:0000000059:PROGC ] Resource 0 0 0 BUILD: [00:0000000060:PROGC ] Message 0 0 0 BUILD: [00:0000000061:PROGC ] Precomp Header 0 0 0 BUILD: [00:0000000062:PROGC ] C/Cpp/Cxx 2 0 0 BUILD: [00:0000000063:PROGC ] Assembler 0 0 0 BUILD: [00:0000000064:PROGC ] Static Libraries 0 0 0 BUILD: [00:0000000065:PROGC ] Dll's 1 0 0 BUILD: [00:0000000066:PROGC ] Exe's 0 0 0 BUILD: [00:0000000067:PROGC ] Resx 0 0 0 BUILD: [00:0000000068:PROGC ] Csharp Targets 0 0 0 BUILD: [00:0000000069:PROGC ] Other 0 0 2 BUILD: [00:0000000070:PROGC ] BUILD: [00:0000000071:PROGC ] Total 3 0 2 BUILD: [00:0000000072:PROGC ] BUILD: [00:0000000073:PROGC ] 0 Warnings, 2 Errors Tag: Re:Different image download method Tag: 59760
 - 6
 - Bug in IEEE1394/Firewire driver in CE5.0 The IEEE1394 driver has a severe bug which stops it from working on platforms with an address-space greater then 32 bit ( like the 36 bit AMD Au1550 Mips processor). When calling the MmMapIoSpace function only the lower 32 bits of the physical address are passed to the function and the wrong address is mapped. The driver ist binary only so I can't fix it myself. Tag: Re:Different image download method Tag: 59757
 - 7
 - Adding a Font to Platform Builder catalog Is there a way to add a new true-type font to Windows CE.NET 4.2? I would like to add a font that is not in the Platform Builder catalog list of fonts (specifically a 7-segment display font). If this can be done in 4.2, is the same process used to add it to Windows CE 5.0? Thanks, Craig Whatley Tag: Re:Different image download method Tag: 59749
 - 8
 - Display Controller on PXA255 I am using CE 4.2 and the XSC1BD LCD display driver. I am trying to run a 640x480 color display ( Optrex T-51513D104JU-FW-A-AC ). This display has DENA (data enable line) which is connected to the L_BIAS line on the PXA255 display controller. I have put a scope on the H_SYNC and V_SYNC lines and they appear to be in spec as required by the display, however, the DENA line is always HIGH. This does not appear to be what the display wants to see. I can not seem to get the PXA255 to toggle this line. Here is how I currently have the PXA255 display controller configured: v_pLcdRegs->LCCR1 = ( LCD_PPL(639) | LCD_HSW(63) | LCD_ELW(15) | LCD_BLW(138) ); v_pLcdRegs->LCCR2 = ( LCD_LPP(479) | LCD_VSW(35) | LCD_EFW(13) | LCD_BFW(33) ); v_pLcdRegs->LCCR3 = ( LCD_PCD(PCD) | LCD_ACB(0x6) | // was ACB=0 LCD_PCP | LCD_BPP(BPP) | LCD_HSP | LCD_VSP ); v_pLcdRegs->LCCR0 = ( LCD_LDM | LCD_SFM | LCD_IUM | LCD_EFM | LCD_BM | LCD_PDD(0x0) | LCD_PAS); Can anyone give me some advice on a next step to take? Is there another newsgroup that is focused on the PXA255 specifically? Thanks, Jeff Tag: Re:Different image download method Tag: 59746
 - 9
 - How to Backup POOM contect in CE database hello, i faced a problem, how to backup POOM content like canlender, contacts, and so on. i thought, there are 2 approachs a copy db files , or open database to read record one by one. in the 1st approach, i don't know the .db files in platform builder is it the .db file which hold all POOM content in the 2nd approach, the reading one by one is very slow process, and i don't record id to looking for could you show me how to read all record. thank you in advance, sze yee Tag: Re:Different image download method Tag: 59741
 - 10
 - Is wzcsvc a driver or a service? I've checked the registry and the CE 5.0 help, they all point out that wzcsvc is a driver, but what kind of driver it is? A protocol driver or anyother driver? Thanks! Tag: Re:Different image download method Tag: 59740
 - 11
 - about GWES and GPE in display driver Hi: I am developing a display driver in WinCE5.0, but I don't understand the relation between GPE and GWES. Should I re-implement the 27 functions filled in the DRVENABLEDATA structure by DrvEnableDriver? Tag: Re:Different image download method Tag: 59736
 - 12
 - RAS Server problem Hi, all I have some problem in using RAS Server in CE.net 4.2. I used the demo program called RASServer in PB. Here is what I did: 1, Add Ras Server/PPTP Server(Incoming) component; 2,I set registry as the help files told as below; [HKEY_LOCAL_MACHINE\Comm\Tcpip\Parms] "ArpUseEtherSNAP"=dword:0 "AutoCfg"=dword:1 "DefaultTOS"=dword:0 "DefaultTTLREG"=dword:128 "DNSDomain"="" "EnableDeadGWDetect"=dword:0 "EnableDHCP"=dword:0 "IGMPLevel"=dword:2 "IPEnableRouter"=dword:0 "NoIdleIfAdapter"=dword:0 "NoIdleIfConnected"=dword:0 "SackOpts"=dword:1 "TCP1323Opts"=dword:0 "TcpMaxConnectResponseRetransmissions"=dword:2 [HKEY_LOCAL_MACHINE\Comm\RTL81391\Parms\Tcpip] "AutoCfg"=dword:0 "AutoInterval"=dword:300 "AutoIP"="" "AutoMask"="255.255.0.0" "AutoSubnet"="" "DefaultGateway"="" "DhcpGlobalInitDelayInterval"=dword:0 [HKEY_LOCAL_MACHINE\Comm\ppp\Server\Parms] "UseAutoIPAddresses"=dword:1 "UseDhcpAddresses"=dword:0 "AutoIPSubnet"=dword:C0A80000 "AutoIPSubnetMask"=dword:FFFF0000 "StaticIPAddrStart"=dword:C0A8FE01 "StaticIpAddrCount"=dword:254 "AuthenticationMethods"=dword:0 "Flags"=dword:0 "Enable"=dword:0 "StartupDelaySeconds"=dword:20 3, Use direct connection mode through a null modem line to the two machines' COM1:, and the ports works fine. 4. Run the demo RasServer on CE device without problem. 5. When I tried to dial in from another PC, I got no response. After I inspected the registry on the CE device, I found a line was added successfully. So the RAS Server is running successfully. I guess some registry settings may be missing or be wrong. In the registry I found a problem: I found nowhere to set the serial port's baud rate. In CE, how to synchronize the baud rate on my both machine? Thanks! maverick Tag: Re:Different image download method Tag: 59733
 - 13
 - Loading NK.BIN in the production mode Hello, I have a customized CE image that I created using Platform Builder. After I download and test the CE image to make sure it works, from the CE platform I have to copy NK.BIN from the 'Release' folder to the 'Hard Disk' folder in order to subsequently boot from that new image. Is there a way to tell Platform Builder to download the CE image to the 'Hard Disk' folder directly? Also, what is the method of choice for copying a customized CE image to the device in a production setting? Thanks in advance. Shane Tag: Re:Different image download method Tag: 59727
 - 14
 - PC104 and PC104 Plus Question We are starting a new windows CE project on a SBC with a PC104 bus. I was told that we should use a SBC computer that uses PC104 Plus interface because that is PCI and that is the interface that Windows CE drivers expect to see to talk to various peripherals. We will be using the PC104/PC104-Plus bus to connect to an IO board that will have other interfaces on it like ethernet, more USB, maybe CAN, Parallel IO and WiFi. Is it true that we should look for a PC104-Plus board over a PC104 board? Thanks. Tag: Re:Different image download method Tag: 59726
 - 15
 - PCMCIA question I added some debug statements to track what the PCMCIA driver is doing. From the output below you can see that we are writing large blocks of data to the PCMCIA card. Can anyone tell me what the client ISRs are and why we always get ten calls to them? For smaller sector writes we get 1 call but for the most part they are always 10. Does the code simply split up request into 10 interrupts? If so, why? Thanks, Nick. Writing 0x00000100 sector(s) starting at 0x0003a38c. PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR Writing 0x000000b0 sector(s) starting at 0x0003a48c. PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR Reading 0x00000020 sector(s) starting at 0x00023ecc. PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR Writing 0x00000020 sector(s) starting at 0x00023ecc. Tag: Re:Different image download method Tag: 59725
 - 16
 - A HID device with Multiple interfaces Ok, so I have a keyboard here and when I look at what happens when it gets connected to the system, I see that there are two interfaces. The first interface has only 1 associated device with it, a keyboard hid device. The second interface, has 3. The first, a system control hid (sleep/wakeup keys), a consumer hid( ff, rw play keys) and a vendor defined hid (don't care). I've been told to write 1 HID driver that will handle all event 4 hid events (actually only 2, keyboard and consumer). After some digging this seems possible in windows 2000/XP/2003 by having a key with a only a vendor ID, product ID and rev versus a Vendor ID, Product ID, rev and Interface ID. Is the same thing possible under CE? Can I have 1 driver load that will handle all the HIDs across both interfaces? I know that the device ID keys are different under Windows CE. I know they are something like : [HKEY_LOCAL_MACHINE\Drivers\HID\LoadClients\VID_PID_REV\Interface_Collection\UsagePage_Usage\Keyboard]. So, any suggestions? Or should I just quit and open a flower shop? -- Using Opera's revolutionary e-mail client: http://www.opera.com/m2/ Tag: Re:Different image download method Tag: 59724
 - 17
 - DirectShow Filter DLL registration problem on CE .NET Hi All, I built the filter DLLs of the Microsoft sample codes (DUMP, EZRGB24) using embedded Visual C++. However, I couldn't get them registered both on the device and on the Emulator. It seems that AMovieDllRegisterServer2() is not support in CE so I changed it back to AMovieDllRegisterServer(). Another two points that I haven't followed their instructions are: 1. Instead of setting the entry-point symbol to DllmainCRTStartup@12, only the default DllmainCRTStartup works 2. I didn't build the base class library by myself, do I have to build my own? Should it be DLL or static library? Does anyone have experience on building your own DirectShow filter on CE .NET? Thanks in advance, Steven Tag: Re:Different image download method Tag: 59719
 - 18
 - "Storage Card" folder stays for 4 seconds after the SD or CF card is removed. On this one CE.NET 4.2 platform, each time I remove the SD card or CF storage card, the "Storage Card" folder will not disppear until after 4 seconds. On other 4.2 platforms the folder disppear immediately after the card is removed. I put debug messages in the SDMMC driver, the SDMMC loader detects the card is removed and unloads the SDMMC driver immediately after the card is removed. So what is causing the 4 seconds delay? Tag: Re:Different image download method Tag: 59718
 - 19
 - Where is the Configuration Combo Box? Whenever I open my platform's workspace in plaform builder I message box appears with this message: "One or more unsupported configurations were found in the selected Platform Builder project file. The configurations will be grayed out in the configuration combo box." I need to see this combo box to find out what these unsupported configurations are. I did a search in online help for "configuration combo box" and did not come up with anything. Where is this "configuration combo box" ? Tag: Re:Different image download method Tag: 59716
 - 20
 - USB Function Driver PDD layer All, I am working with a Windows CE 5.0 USB function driver's PDD layer. My processor is pxa255, and I have copied the 2 dirs in the existing function driver from the CSP directory under ARM\Intel\Pxa25x\Usb\Function to my platform's Drivers dir. I have modified the Lib\pxa25xufnlib.cpp to include hardware specifics of attachment, detachment, power on, power off etc, but left the code in the Pdd dir as is. The sources file in the two directories are setup to generate 2 lib files pxa25xufnlib.lib and pxa25xusbfn_lib.lib. What is the usage model that was envisioned for the usage of these libraries? I believe I need to generate a .dll that links both the mdd layer in ufnmddbase.lib and the pdd libs above, but I have not found code that "binds it all together". Regards, Inger M. K. Tag: Re:Different image download method Tag: 59711
 - 21
 - problem loading driver Iam trying to load a stream interface driver "gendriver.dll" using an application on the Smartphone 2003 emulator. Following is the registry entry that i created. [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\gendriver] "Prefix"="GEN" "Dll"="gendriver.dll" "Order"=dword:0 When i use the ActivateDeviceEx(_T("Drivers\\BuiltIn\\Gendriverl"),NULL,0,NULL), It returns NULL and GetlastError() returns '2' ie, "The system cannot find the file specified" error. But the file is available on emulator in \\windows ,confirmed through remote file viewer. I get a valid handle for ActivateDeviceEx(_T"Drivers\\BuiltIn\\Serial"),NULL,0,NULL) Also tried unsuccessfully with the following change in the registry [HKEY_LOCAL_MACHINE\Drivers\gendriver] "Prefix"="GEN" "Dll"="gendriver.dll" "Order"=dword:0 Tag: Re:Different image download method Tag: 59705
 - 22
 - PASSTHRU NDIS Intermediate Driver and IP address problem under WinCE 4.2 Hi everyone, I have used the passthru sample from the WinCE4.2 platform builder to create my own intermediate driver. I have call it IMdriver.dll and these are the registry entries I have added in the registry: HKEY_LOCAL_MACHINE\Comm\IMdriver1 NoDeviceCreate = 1 ImagePath = "IMdriver.dll" Group = "NDIS" I have not used any of the "Bind" or "ProtocolsToBindTo" since I wanted my intermediate driver to bind to any available miniport. I have install the driver to a PocketPC 2003 and have tried it using my miniport driver. Now, here is my problem. As soon as the device associates to the network, using WZCS, the oid OID_GEN_NETWORK_LAYER_ADDRESSES is set to the miniport with a valid IP address. If I try to ping my device from a remote station, it works fine. However, in the adapter's information where the IP should appear, I get an invalid IP address. In addition, when I searched in the registry I found out that the correct TCPIP configuration was under HKEY_LOCAL_MACHINE\Comm\IMdriver1\TCPIP instead of HKEY_LOCAL_MACHINE\Comm\MyMiniport\TCPIP, which had all zeros. I do not need to say that the IP is never renewed and the WZCS pops up the dialog that indicates I do not a connection with a valid IP and asks me to select a new access point. Does anybody know why the TCP/IP settings have been bound to the intermediate driver instead of the miniport? As I understand it look like my intermediate has not been "sandwitched" between the miniport and the protocols successfully. Any help will be greatly appreciated. Michalis Koundourakis Tag: Re:Different image download method Tag: 59695
 - 23
 - CE 5.0 CEC File Hi, can anybody from MS tell me how we can use our painful created ce4.x catalogs? We use it only to copy and register ready compiled files to our platforms. And it was not easy to manage those hundreds of settings. I read in Help that: BIBInfo blocks are deprecated; BuildMethod blocks are now only used to specify supported CPUs and provide links to source files, Help documentation (.chm), and Platform Builder project (.pbpxml) files. So do we now have to manage all our compex files and settings in project.bib and project.reg? And do all the work again?? Tag: Re:Different image download method Tag: 59694
 - 24
 - CE 5.0 compiling \PRIVATE\WINCEOS missing 'ndislink.h' error Can someone help me slove the error I got here? Thanks. BUILD: [00:0000000897:PROGC ] Compiling \WINCE500\PRIVATE\WINCEOS\COMM\BLUETOOTH \TDI\ directory. BUILD: [01:0000000906:PROGC ] Compiling .\tdi.cxx BUILD: [01:0000000909:ERRORE] e:\WINCE500\PRIVATE\WINCEOS\COMM\BLUETOOTH\TDI\tdi .cxx(55) : fatal error C1083: Cannot open include file: 'ndislink.h': No such fi le or directory BUILD: [01:0000000910:PROGC ] Linking E:\WINCE500\public\COMMON\oak\lib\ARMV4I\r etail\bttdi.lib BUILD: [01:0000000912:ERRORE] LINK : fatal error LNK1181: cannot open input file 'obj\ARMV4I\retail\tdi.obj' Tag: Re:Different image download method Tag: 59689
 - 25
 - How to copy file in a readonly system? Hi, all Yesterday I found in a ce system that any action which tries to copy files is forbidden, a pop-up window says that system is a rom. I guess that due to choosing the feature of ROM-only file system in PB when building the NK.bin. So, there is another question: how can I get the file out,say copy, from the system when the system is a rom? Or, it's a mission imporssibble? THX maverick Tag: Re:Different image download method Tag: 59684
- Next
 - 1
 - Failed to add the CoCreateGuid functionality for OLE32 feature This is a multi-part message in MIME format. ------=_NextPart_000_000A_01C4CA81.9824D880 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable When refreshing features I get this Warning: Warning PB2012: Failed to add the CoCreateGuid functionality for OLE32 = feature (SYSGEN_OLE_GUIDS) to the platform. ... 1 warnings found. Not all features or drivers could be added. The build = system will automatically include these when you build the platform. I do not know what to do about it. I also do not understand the message = at the bottom. I driver can be added or it cannot. How is it that it = cannot be added at refresh time but be automatically included at build = time? I have a suspicion this error has something to do with the addition of = regsvr32.pbp to the build. I had to add the ole32.lib to to it. To see = everything I had to do to this project in the build so far please see my = "Adding RegSvr32.pbp To The Platform Causes Errors" thread. ------=_NextPart_000_000A_01C4CA81.9824D880 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.2900.2523" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff background=3D"">When = refreshing=20 features I get this Warning: Warning PB2012:  Failed to add = the=20 CoCreateGuid functionality for OLE32 feature (SYSGEN_OLE_GUIDS) to the=20 platform. ... 1 warnings found. Not all features or drivers could = be=20 added. The build system will automatically include these when you build = the=20 platform. I do not know what to do about it. I also do not = understand the=20 message at the bottom. I driver can be added or it cannot. How is it = that it=20 cannot be added at refresh time but be automatically included at build=20 time? I have a suspicion this error has something to do with the = addition=20 of regsvr32.pbp to the build. I had to add the ole32.lib to to it. To = see=20 everything I had to do to this project in the build so far please see my = "Adding RegSvr32.pbp To The Platform = Causes=20 Errors" thread.</BODY></HTML> ------=_NextPart_000_000A_01C4CA81.9824D880-- Tag: Re:Different image download method Tag: 59683
 - 2
 - where to store the hive directory? Hi, all I use Hive-based registry in my NK.bin. And system will generate a directory named "Documents and Settings" on the root after booting. I want to move it onto my Compact Flash. How can I manage to do it? I tried to modify the following registry,but failed. [HKEY_LOCAL_MACHINE\init\BootVars] ; "SYSTEMHIVE"="Documents and Settings\\system.hv" "SYSTEMHIVE"="\\HardDisk\\Documents and Settings\\system.hv" ; "PROFILEDIR"="Documents and Settings" "PROFILEDIR"="\\HardDisk\\Documents and Settings" "Start DevMgr"=dword:1 THX Tag: Re:Different image download method Tag: 59682
 - 3
 - WBTSHELL can not work! Hello Every Guru, I am a new baby of using CE.NET PB 4.2. I am trying to use the WIZARD to build a Windows Thin Client platform. I thought that once I select from the Wizard to build a WBT will get a WBTSHELL for my x86 device. But I can not get the WBTSHELL, I get a Standard Shell instead. Who can help me out for this problem? I also notice that there is a file "rdp.reg", should I try to include this file in some where? Is there anyone can help me to build a WBT? Thanks in advance. Jack Wu Tag: Re:Different image download method Tag: 59671
 - 4
 - binfs hi, i read in the mailing list that if we want to support binfs we have to build multiXIP image. i dont understand the necessity for this. i have nor flash and nand flash on my hardware. i will store eboot in nor flash and wince image in nand flash. my necessity is as follows i have to give support in eboot to download the store the wince image in nand flash(i am studying the support given in s3c2410 BSP) i will not mount binfs after wince boot. should i have to change to generate multiplexip to give the required functionality? can i store and read nk.bin(single xip)? Regards sharath Tag: Re:Different image download method Tag: 59670
 - 5
 - cs8900 halt hi all my cs8900 driver will halt after work a while . I use serial kitl to debug it , and found there are 2 problems . 1 , interrupt not be detected . ndis calls MiniportDisableInterrupt to disable interrupt first ,then MiniportHandleInterrupt to do some processing ,finally MiniportEnableInterrupt . this is the whole processing with a receive packet interrupt accurs. But after some while MiniportDisableInterrupt will never be called .I don't know what happened . 2 , MiniportSendPackets triggers MiniportReset then the driver halted. What situation will cause NDIS call MiniportReset ? Thank you in advance. Tag: Re:Different image download method Tag: 59669
 - 6
 - [Q]: Waveapi thread priority Hi all, How do I set the waveapi thread [SPS_Thread] priority ? Is there any registry setting for the same as present for audevman thread[CSmixer::MixerThreadMain] as below: [HKEY_LOCAL_MACHINE\Audio\SoftwareMixer] "Priority 256"=dword:dc regards Ryan Tag: Re:Different image download method Tag: 59668
 - 7
 - Audio Driver IOCTL_MIX_MESSAGE has not been called Platform: SMDK2410 CE Version: 4.20 Target: to support mixer api The original driver provided by Samsung does not support IOCTL_MIX_MESSAGE in WAV_IOControl function. Our actions: 1. deal IOCTL_MIX_MESSAGE in WAV_IOControl 2. make sure waveapi.dll has been loaded 3. make sure audio driver wavedev has been loaded 4. An application calls mixerGetNumDevs, waveapi debug outs +WAM_Open -WAM_Open IOCTL_MIXER_GET_NUM_DEVS but IOCTL_MIX_MESSAGE has not been called, even WAV_IOControl has not been called Anyono can help me? Thanks in advance! Gowhawk Tag: Re:Different image download method Tag: 59667
 - 8
 - WinCE QFE releases for the week of November 8 - November 12, 2004 The following updates for Windows CE have been recently released and are available for download. More information for each update is provided in the Readme document available after the individual update(s) has been installed. Windows CE 3.0 Update name: Windows CE 3.0 Platform Builder QFE 041108_KB883487 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=595AD93D-6D72-4CF8-AF53-64AF569EAC9B&displaylang=en Component: JScript, VBScript Description: Error handling by JScript and VBScript may cause a memory leak Windows CE .NET 4.0 Update name: Windows CE .NET 4.0 Platform Builder QFE 041105_KB888087 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=F9271F99-9583-4645-B6A3-139C9028DF97&displaylang=en Component: RDP Description: This update addresses possible SmartCard redirection issue. Windows CE .NET 4.2 Update name: Windows CE .NET 4.2 Platform Builder QFE 041103_KB888517 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=82A50211-13FA-4180-90AC-05643663FDD8&displaylang=en Component: URLMON Description: An exception may occur when parsing HTML file using Wininet API. Update name: Windows CE .NET 4.2 Platform Builder QFE 041105_KB885273 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=4380C9EC-5965-4B34-A9FA-3D1B4A3FB036&displaylang=en Component: 1394 Description: Windows CE .NET 4.2 may not always enforce data DWORD alignment requirement of 1394 SBP-2 protocol. This may result in some issues when reading/writing files. Windows CE 5.0 Update name: Windows CE 5.0 Platform Builder QFE 041101_KB885849 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=36C48D0C-6689-4272-A9FC-B7DCBE8BDA53&displaylang=en Component: pMail Description: Out of memory condition may occur when creating more then 150 emails. Update name: Windows CE 5.0 Platform Builder QFE 041104_KB838781 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=C0013B44-F13C-4F15-8126-118E7926BAAC&displaylang=en Component: USB driver Description: This is an update to the ARMV4I USB Function device driver. Update name: Windows CE 5.0 Platform Builder QFE 041110_KB887585 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=3E777B14-12E4-460E-8E49-E6D22503945F&displaylang=en Component: VoIP Description: VoIP UI settings do not get written to the registry and may get lost if the device is rebooted Download Link - directs you to the Microsoft Download Center page associated with each update. Each update is contained in a self-extracting compressed file. Component - displays the module(s) updated in each QFE Description - provides more information on the issue(s) fixed **DO NOT REPLY - THIS E-MAIL IS BEING SENT TO YOU FROM AN UNMONITORED ACCOUNT. Due to Microsoft's security requirements, the hyperlink(s) contained in this e-mail may not automatically open your browser. If you experience any difficulty, please copy the link and paste into your browser. ** Tag: Re:Different image download method Tag: 59661
 - 9
 - 10ms IST latency I am new to Win CE and cant understand why I am having such a long latency on my IST. My hardware is generating a 1kHz interrupt on IRQ5. I am running CE 4.2. I measured over 10 ms (milliseconds!!!!!) of delay between the interrupt and my IST. Can anyone explain why there is such a delay? Is it how I built my OS image? Tag: Re:Different image download method Tag: 59654
 - 10
 - Platform Builder 5.0 doesn't allow Windows XP SP2 to shut down I am running Windows XP SP2 on an Asus AMD 64 mother board. I installed the trial version of PB 5.0 the other day. Since that time when I go to shut down the computer gets to the screen that says "Windows is shutting down". The mouse cursor is active for a few seconds and then the computer freezes. The power light on the computer starts to blink at this time. I tried to think of all the things I have done to my computer over the last couple days and the only thing I could think of was installing PB. Luckily I have not made any other changes, so I did a System Restore to the restore point of installing PB. The problem is now fixed. I have not tried reinstalling PB to see if the problem comes back because I don't have the time to mess with it. I am posting here just too see if there is anyone else who is having this problem or knows a solution. Tag: Re:Different image download method Tag: 59648
 - 11
 - Problem in EVC4 with Windows CE Standard Software Development Kit HI, I tried to build an application in EVC4 with the standard SDK for windows ce4.2. I want to build it for an ARM based device;but i couldnt find an option for that in my EVC4.The only option found is STANDARDSDK_420 Emulator. Can anybody suggest a solution for building my application for ARM processor(using the standard SDK). Tag: Re:Different image download method Tag: 59643
 - 12
 - USB Enumeration fails We are using Win CE 4.2 .net and a OMAP 1610 SAMPLE (H2 with and expansion card) plattform. When we attatch the USB cable to the Win XP host PC, the enumeration of the USB Port fails. What I am trying to figure out, is if this is a base OS configuration problem or a BSP problem. From the log when CE boots these errors are reported. 7018 PID:e5db8f66 TID:e5db8bc6 ERROR: e:\wce_bsp\platform\omap\drivers\usbo\init.cpp line 399: 7019 PID:e5db8f66 TID:e5db8bc6 OTG: ERROR holding in reset. 9104 PID:e5db8f66 TID:e5db8bc6 ERROR: e:\wce_bsp\platform\omap\drivers\usbc\w2fc\usb_ser.cpp line 501: 9105 PID:e5db8f66 TID:e5db8bc6 OTG: ERROR holding in reset. The exact code where the error message is printed is this: init.cpp ....... VOID InitOTGController(POTG_REGISTERS pOTGRegs) { // Reset the OTG first pOTGRegs->ulSYSCON_1 |= MASK_SOFT_RESET; // Wait until reset is done DWORD dwCount = 0; while (!(pOTGRegs->ulSYSCON_1&MASK_RESET_DONE)) { if (dwCount++ > 100) { // Break out dead lock, something is wrong. ERRORMSG (TRUE, (TEXT("OTG: ERROR holding in reset.\n"))); return; } Sleep (1); } -> more code, but not executed ........ usb_ser.cpp ........ VOID InitOTGController() { POTG_REGISTERS pOTGRegs; DWORD dwCount = 0; pOTGRegs = (POTG_REGISTERS)MapIOSpace ( (void *)(PHYS_TO_UNCACHED_KERN(USB_OTG_BASE)), sizeof(OTG_REGISTERS), (PAGE_READWRITE | PAGE_NOCACHE)); if (!pOTGRegs) { ERRORMSG(1, (TEXT("OTG: failed to map OTG registers.\r\n"))); return; } // If OTG has been initialized, don't do it again. if ((pOTGRegs->ulSYSCON_2 & MASK_OTG_EN) || (pOTGRegs->ulSYSCON_2 & MASK_HMC_MODE)) { return; } // If OTG has been initialized, don't do it again. if (pOTGRegs->ulSYSCON_1 & (MASK_USB0_TRX_MODE |MASK_USB2_TRX_MODE|MASK_USB2_TRX_MODE)) { return; } // Reset the OTG first pOTGRegs->ulSYSCON_1 |= MASK_SOFT_RESET; // Wait until reset is done while (!(pOTGRegs->ulSYSCON_1&MASK_RESET_DONE)) { if (dwCount++ > 100) { // Break out dead lock, something is wrong. ERRORMSG (TRUE, (TEXT("OTG: ERROR holding in reset.\n"))); return; } Sleep (1); } -> more code, but not executed. Tag: Re:Different image download method Tag: 59642
 - 13
 - PB2505 error experts help me hai, i have created a new platform named INTER_CEPC in 4.2 for internet appliance for cepc....everytime the error is the same,i again created another platform for cepc,same error,pls help me...no project is included.... Error - still inside an if statement after parsing complete makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec). makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec). Error PB2505: Error executing #(F:\WINCE420\PUBLIC\inter_cepc\RelDir\CEPC_X~2\)makeimg.exe. INTER_CEPC - 4 error(s), 0 warning(s) Thanking for ur help Tag: Re:Different image download method Tag: 59638
 - 14
 - Why GWES turns off display automatically ???? Hi, I have a XIP image on .Net 4.2. When the splash screen is shown, the LCD is on. After splash screen, the LCD is off. After I print the debug messages, I found DISP::DrvEscape is called with SETPOWERMANAGEMENT to turn off the LCD. After I remove the battery driver, the phenomenon will not happen. Why ? BTW, non-XIP image will not have this situation. I put the following files in the xip kernel. nk.exe coredll.dll filesys.exe binfs.dll fsdmgr.dll mspart.dll FLASHDRV.DLL batterydrv.dll Thanks. Yu. Tag: Re:Different image download method Tag: 59632
 - 15
 - How to get rid of "ok" button on dialog title bar? I delet system menu in dialog properties. "X" button disappeared but "ok" button not.How to get rid of "ok" button on dialog title bar? Tag: Re:Different image download method Tag: 59631
 - 16
 - How to make sure an appl. not run XIP Hi all, Is it possible to make sure that an application is not run XIP from flash(IPSM directory), without first "manualy" copy it to RAM file system directory? I want to get best possible performance running an application that heavily creates,writes and reads files to flash(IPSM). I'm running CE 4.2 and IPSM. Best regards Anders Tag: Re:Different image download method Tag: 59629
 - 17
 - Why icon can't appear in the tray? My application want to show a icon in the taskbar trap. I add codes as follow. These codes run when click on a button. m_tnid.cbSize=sizeof(NOTIFYICONDATA); m_tnid.hWnd=m_hWnd; m_tnid.uFlags=NIF_MESSAGE|NIF_ICON|NIF_TIP; m_tnid.uCallbackMessage=WM_TRAY_NOTIFY; //ÓÃ»§¶¨ÒåµÄ»Øµ÷ÏûÏ¢¡¡¡¡ CString szToolTip=L"ÍÐÅÌÍ¼±êÊµÀý"; _tcscpy(m_tnid.szTip, szToolTip); m_tnid.uID=IDI_ICON2; HICON hIcon=NULL; hIcon=AfxGetApp()->LoadIcon(IDI_ICON2); m_tnid.hIcon=hIcon; ::Shell_NotifyIcon(NIM_ADD,&m_tnid); After these codes run, a blank pane appears on the trap of taskbar,but the icon does't appear. Why the icon can't appear? Tag: Re:Different image download method Tag: 59625
 - 18
 - WINCE 5.0 suspend/resume Dear all, I am working on WINCE 5.0 OS porting on my customized PXA270 platform. I got a trouble in suspend/resume function. For example, I run Microsoft WordPad, and I suspend the system and then resume it. And I can continue typing words in Microsoft Word, but the system will hang once I run other applications or close Microsoft WordPad. What problem is it? Thank you. Tag: Re:Different image download method Tag: 59623
 - 19
 - wince 5.0 ,maninstone hi, i m trying to build image for flash in mainstone but not successful. could u guys let me know how can i build it.i m setting IMGFLASH=1 do i have to change memmory /config file to do.... but everything looks strange in wince 5.0. why microsoft has the habbit of first confusing and making complex things and then solving them... thanx Tag: Re:Different image download method Tag: 59621
 - 20
 - Smartcard in WinCE 4.2 Hi I'm using eMbedded VC++ to write a C++ wrapper DLL to access smartcard functions of winscard.dll. (The intention is for my other C# .NET UI program to call my C++ wrapper DLL. ) The problem is that I am getting linkage errors while building my DLL in eMVC++. The errors are like this: xxxxxx.obj: error LNK 2019: unresolved external symbol SCardxxxxxx referenced in function xxxxxxxx Please advice? Tag: Re:Different image download method Tag: 59619
 - 21
 - HID device Hey, question here. I have a keyboard that tells me that it's got 4 HID's associated with it. Instead of having a seperate driver load for each HID, can I have the same driver handle multiple HID's? Thanks a million. Brian -- Using Opera's revolutionary e-mail client: http://www.opera.com/m2/ Tag: Re:Different image download method Tag: 59618
 - 22
 - platbuilder: 4 Millions Domains data with Category Successfull Internet and Direct Marketing products on www.promotionsite.net * NEW * DOMUS Domains Toolkit Fall 2004 - Unique on the Net 4 Millions "Whois" Domains data with Expiration Date and Category*. Ultimate Version (October 2004) - Our best rate starts from US *$149*. A wonderful tool for Internet and Direct Marketing. Available in Basic, Advanced and Full Editions. It contains a domain database with 4 millions *FRESH* October 2004 New records .com, .net, .org. 4 Gigabytes MS Excel data zipped on CD-Roms/Dvd. Compression 3:1. MS Excel or Text tab delimited data files Available! Each record include the full "whois" fields info and homepage info: Domain Name, Registrant Company, Contact, Address, City, Tel, Fax, Email, Administrative Company, Contact, Address, City, Tel, Fax, Email, Technical Company, Contact, Address, City, Tel, Fax, Email, Billing Company, Contact, Address, City, Tel, Fax, Email, Zone Company, Contact, Address, City, Tel, Fax, Email, Name Servers until 6 name servers with IP addresses Record Created on Date, Record Updated on Date, Record *Expires* on Date Domain Title, Domain Description, Domain Keywords (*Category*), First 300 Words in the Domain Website Homepage. Download Free Demo, Screenshot, see Products Details or Order On-Line at www.promotionsite.net. Available On-Line many other Promotion Products. Instant Shipment or Download On-Line Registered Versions available! Best Regards, www.promotionsite.net The Best place where to find Internet Marketing Resources on the Net. --- This is a one-time only information. The enrolled (final) text of S. 877 as it was passed by the Senate on November 25, 2003, and agreed to by the House of Representatives on December 8, 2003, allows e-marketers to send UCE as long as the message contains an opt-out mechanism, a functioning return e-mail address and the legitimate physical address of the mailer. The bill was signed by the President on December 16, 2003, and takes effect on January 1, 2004. Your address isn't in any of our archives, however for Can Spam Act 2003 Compliance, you can remove at http://www.promotionsite.net/remove.html Tag: Re:Different image download method Tag: 59616
 - 23
 - Mismatched Time Stamp Error I'm trying to include celog to do some event tracking, and I'm getting a time stamp error on the .rel file: Error: Mismatched time stamp on .rel file for module celog.dll requesting kernel fixup. Valid .rel file is required for kernel fixups. I've seen this before on other modules when doing quick incremental builds without having WINCEREL set (thus the file in the flat release directory doesn't get updated). However, we don't build celog.dll so we have no control over it's time stamp or .rel file. Any ideas on what the tool is complaining about or how to get around it? What is it trying to match up anyway? -- Dean Ramsier - eMVP Tag: Re:Different image download method Tag: 59615
 - 24
 - How to speed up build process Hi, I am fairly new to PlatBuilder, and I have a question. Everytime I make changes to the PlatBuilder project, e.g. project.reg, project.bib, and application project I included with the OS image, I use Build OS | Build and Sysgen to rebuild the OS image, and it takes an hour; it becomes basically impractical to do any meaningful debugging. I think I must be doing something wrong. Can anyone tell me the proper way of building the OS image? I have the share source code installed. Does that affect the build process? Thanks, Scott Tag: Re:Different image download method Tag: 59613
 - 25
 - Hive Backup? Hi All (Again), Using Platform Builder 4.2; is it possable to create a back-up copy of the registry hive file? Currently, if I try and read/copy it (as a file) I get a sharing violation error; I'd like to be able to copy the file for backup purposes and to allow media upgrades etc without losing the hive content. Many Thanks. Tag: Re:Different image download method Tag: 59606

Related to the post a little below this entry.
I have an nk.bin image created elsewhere (ie no source).
Is it possible to use Platform Builder to launch that image?
--
David Jones
Senior Lecturer
School of Electrical & Computer Engineering
RMIT University
+61 3 99255318

Top

Re: Re:Different image download method by Bruce

Bruce
Wed Nov 17 06:59:25 CST 2004

Yes, File/Open Workspace -> select the nk.bin file as the workspace.

Apparently, I use a different sort order than you I can't find the related
topic below this one.

--
Bruce Eitman (eMVP)
Senior Engineer
beitman AT applieddata DOT net

Applied Data Systems
www.applieddata.net
An ISO 9001:2000 Registered Company
Microsoft WEP Gold-level Member

Do have an opinion on the effectiveness of Microsoft Windows Mobile and
Embedded newsgroups? Let us know!
https://www.windowsembeddedeval.com/community/newsgroups

Top

Re: Re:Different image download method by davejones

davejones
Fri Nov 19 06:57:02 CST 2004

Thanks, that worked.... Useful!

The other posting was 3 threads below.

"Bruce Eitman (eMVP)" wrote:

> Yes, File/Open Workspace -> select the nk.bin file as the workspace.
>
> Apparently, I use a different sort order than you I can't find the related
> topic below this one.
>
> --
> Bruce Eitman (eMVP)
> Senior Engineer
> beitman AT applieddata DOT net
>
> Applied Data Systems
> www.applieddata.net
> An ISO 9001:2000 Registered Company
> Microsoft WEP Gold-level Member
>
> Do have an opinion on the effectiveness of Microsoft Windows Mobile and
> Embedded newsgroups? Let us know!
> https://www.windowsembeddedeval.com/community/newsgroups
>
>
>

Top