USB RNDIS Device

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Bluetooth crases with i scan services Hi, I am using 4.2 BSP migrated to 5.0 for PXA255 ARM proessor. I am using Bluetooth over USB. With the application BlueSolel I am able to detect my WinCE devices. Also able to pair up it. bluetooth device. But when I try to detect the serives provided by my WinCE device it throws following exception. Can anyone help me? -------------------------------------------------------------- o context/callback for page scan rep mode change - ignored [WARN] MaxSlotChange ignored - no callback! 0x8335661c: USB HCD: DEBUGCHK failed in file c:\wince500\platform \viper42\drivers\viperusb\hcd\hcd2\cpipe.cpp at line 1952 0x8335661c: Data Abort: Thread=8335661c Proc=816dc5f0 'device.exe' 0x8335661c: AKY=00000009 PC=02cc084c(hci2.dll+0x0002084c) RA=02cc0824(hci2.dll+0x00020824) BVA=30ff3147 FSR=00000003 0x8335661c: NKDispatchException: returning failure. Flags=0 0x8335661c: Unhandled exception 80000002: 0x8335661c: Terminating thread 8335661c 0x8335661c: Secondary thread in proc 2347970a (device.exe) faulted! 0x83341824: Data Abort: Thread=83341824 Proc=816dc5f0 'device.exe' 0x83341824: AKY=00000009 PC=02cbf264(hci2.dll+0x0001f264) RA=02cbf504(hci2.dll+0x0001f504) BVA=aaaaab32 FSR=00000003 0x83341824: NKDispatchException: returning failure. Flags=0 0x83341824: Unhandled exception 80000002: ------------------------------------------------------------- Thanks in advance Regards, Omkar Tag: USB RNDIS Device Tag: 102716
  - 2
    - PEAP Authentication not working Hi I'm totally lost here I enabled PEAP authentication. WLAN gets associated with AP but while authentcating I'm getting a popup asking for username and password. But even if I give the right credentials the popup comes back immediately(not sure whether it is waiting for reply from AP). Each time I click ok in popup, I see in the dbg messages that somethimg is transmitted to the AP. But it is not getting Authenticated. Also I see some errors like "Unknown: DEBUGCHK failed in file d:\macallan\private\winceos\comm \ndis51\sys\miniport.c at line 3753" But I'm able to connect to AP with PEAP from my laptop. I have attached the debug msgs output below. Help me out guys. Sitting with this issue for quite lonnggggg. ----------------------------------------------------------------------------------------- NDIS:: Indicating [MEDIA_CONNECT] to [NDISUIO]. 0x83ab7c5c: WZCSVC:: NIO:: WARNING - Discarding EAPOL packet length 69 from 001A30B812C7, EAPOL processing currently disabled 0x83ab7400: NIO: Send EAPOL packet type 888E 18 bytes to DestMAC=001A30B812C7 0x83ab7400: Tx:EAPOL To Target 0x83cf2dac: NIO: Send EAPOL packet type 888E 39 bytes to DestMAC=001A30B812C7 0x83cf2dac: Tx:EAPOL To Target 0x83ab7400: NIO: Send EAPOL packet type 888E 39 bytes to DestMAC=001A30B812C7 0x83ab7400: Tx:EAPOL To Target 0x83ab7400: NIO: Send EAPOL packet type 888E 39 bytes to DestMAC=001A30B812C7 0x83ab7400: Tx:EAPOL To Target 0x83cf2dac: NIO: Send EAPOL packet type 888E 39 bytes to DestMAC=001A30B812C7 0x83cf2dac: Tx:EAPOL To Target 0x83cf2dac: ZCF:: Warning! Disable connection to [PVWNET200] permanently. 0x83cf2dac: ZCF:: LogEvent close current failed EAPOL session for [PVWNET200].. 0x83cf2dac: OID_802_11_SSID0x83ae9a88: DisassocCFM 0x83ae9a88: Connection lost: indicated to NDIS0x83ae9a88: Unknown: DEBUGCHK failed in file d:\macallan\private\winceos\comm\ndis51\sys \miniport.c at line 3318 0x83ae9a88: DEBUG_BREAK @01c29684 MD=1f Ignored. 0x83ae9a88: Unknown: DEBUGCHK failed in file d:\macallan\private \winceos\comm\ndis51\sys\miniport.c at line 3753 0x83ae9a88: DEBUG_BREAK @01c29f88 MD=1f Ignored. 0x83ae9a88: PHGHHAL_EVNT_DISCONNECT0x83ae9a88: PHGHHAL_EVNT_DISCONNECT0x83ae9a88: Connection lost: indicated to NDIS0x83ae9a88: Unknown: DEBUGCHK failed in file d:\macallan\private \winceos\comm\ndis51\sys\miniport.c at line 3318 0x83ae9a88: DEBUG_BREAK @01c29684 MD=1f Ignored. 0x83ae9a88: Unknown: DEBUGCHK failed in file d:\macallan\private \winceos\comm\ndis51\sys\miniport.c at line 3753 0x83ae9a88: DEBUG_BREAK @01c29f88 MD=1f Ignored. 0x83cf2dac: Connection lost: indicated to NDISc: OID_802_11_SSID0x83ab7400: ZCF:: LogEvent new list selected.. Close current EAPOL session for [].. Tag: USB RNDIS Device Tag: 102714
  - 3
    - PEAP Authentication not working Hi I'm totally lost here I enabled PEAP authentication. WLAN gets associated with AP but while authentcating I'm getting a popup asking for username and password. But even if I give the right credentials the popup comes back immediately(not sure whether it is waiting for reply from AP). Each time I click ok in popup, I see in the dbg messages that somethimg is transmitted to the AP. But it is not getting Authenticated. Also I see some errors like "Unknown: DEBUGCHK failed in file d:\macallan\private\winceos\comm \ndis51\sys\miniport.c at line 3753" But I'm able to connect to AP with PEAP from my laptop. I have attached the debug msgs output below. Help me out guys. Sitting with this issue for quite lonnggggg. ----------------------------------------------------------------------------------------- NDIS:: Indicating [MEDIA_CONNECT] to [NDISUIO]. 0x83ab7c5c: WZCSVC:: NIO:: WARNING - Discarding EAPOL packet length 69 from 001A30B812C7, EAPOL processing currently disabled 0x83ab7400: NIO: Send EAPOL packet type 888E 18 bytes to DestMAC=001A30B812C7 0x83ab7400: Tx:EAPOL To Target 0x83cf2dac: NIO: Send EAPOL packet type 888E 39 bytes to DestMAC=001A30B812C7 0x83cf2dac: Tx:EAPOL To Target 0x83ab7400: NIO: Send EAPOL packet type 888E 39 bytes to DestMAC=001A30B812C7 0x83ab7400: Tx:EAPOL To Target 0x83ab7400: NIO: Send EAPOL packet type 888E 39 bytes to DestMAC=001A30B812C7 0x83ab7400: Tx:EAPOL To Target 0x83cf2dac: NIO: Send EAPOL packet type 888E 39 bytes to DestMAC=001A30B812C7 0x83cf2dac: Tx:EAPOL To Target 0x83cf2dac: ZCF:: Warning! Disable connection to [PVWNET200] permanently. 0x83cf2dac: ZCF:: LogEvent close current failed EAPOL session for [PVWNET200].. 0x83cf2dac: OID_802_11_SSID0x83ae9a88: DisassocCFM 0x83ae9a88: Connection lost: indicated to NDIS0x83ae9a88: Unknown: DEBUGCHK failed in file d:\macallan\private\winceos\comm\ndis51\sys \miniport.c at line 3318 0x83ae9a88: DEBUG_BREAK @01c29684 MD=1f Ignored. 0x83ae9a88: Unknown: DEBUGCHK failed in file d:\macallan\private \winceos\comm\ndis51\sys\miniport.c at line 3753 0x83ae9a88: DEBUG_BREAK @01c29f88 MD=1f Ignored. 0x83ae9a88: PHGHHAL_EVNT_DISCONNECT0x83ae9a88: PHGHHAL_EVNT_DISCONNECT0x83ae9a88: Connection lost: indicated to NDIS0x83ae9a88: Unknown: DEBUGCHK failed in file d:\macallan\private \winceos\comm\ndis51\sys\miniport.c at line 3318 0x83ae9a88: DEBUG_BREAK @01c29684 MD=1f Ignored. 0x83ae9a88: Unknown: DEBUGCHK failed in file d:\macallan\private \winceos\comm\ndis51\sys\miniport.c at line 3753 0x83ae9a88: DEBUG_BREAK @01c29f88 MD=1f Ignored. 0x83cf2dac: Connection lost: indicated to NDISc: OID_802_11_SSID0x83ab7400: ZCF:: LogEvent new list selected.. Close current EAPOL session for [].. Tag: USB RNDIS Device Tag: 102713
  - 4
    - PEAP Authentication not working Hi I'm totally lost here I enabled PEAP authentication. WLAN gets associated with AP but while authentcating I'm getting a popup asking for username and password. But even if I give the right credentials the popup comes back immediately(not sure whether it is waiting for reply from AP). Each time I click ok in popup, I see in the dbg messages that somethimg is transmitted to the AP. But it is not getting Authenticated. Also I see some errors like "Unknown: DEBUGCHK failed in file d:\macallan\private\winceos\comm \ndis51\sys\miniport.c at line 3753" But I'm able to connect to AP with PEAP from my laptop. I have attached the debug msgs output below. Help me out guys. Sitting with this issue for quite lonnggggg. ----------------------------------------------------------------------------------------- NDIS:: Indicating [MEDIA_CONNECT] to [NDISUIO]. 0x83ab7c5c: WZCSVC:: NIO:: WARNING - Discarding EAPOL packet length 69 from 001A30B812C7, EAPOL processing currently disabled 0x83ab7400: NIO: Send EAPOL packet type 888E 18 bytes to DestMAC=001A30B812C7 0x83ab7400: Tx:EAPOL To Target 0x83cf2dac: NIO: Send EAPOL packet type 888E 39 bytes to DestMAC=001A30B812C7 0x83cf2dac: Tx:EAPOL To Target 0x83ab7400: NIO: Send EAPOL packet type 888E 39 bytes to DestMAC=001A30B812C7 0x83ab7400: Tx:EAPOL To Target 0x83ab7400: NIO: Send EAPOL packet type 888E 39 bytes to DestMAC=001A30B812C7 0x83ab7400: Tx:EAPOL To Target 0x83cf2dac: NIO: Send EAPOL packet type 888E 39 bytes to DestMAC=001A30B812C7 0x83cf2dac: Tx:EAPOL To Target 0x83cf2dac: ZCF:: Warning! Disable connection to [PVWNET200] permanently. 0x83cf2dac: ZCF:: LogEvent close current failed EAPOL session for [PVWNET200].. 0x83cf2dac: OID_802_11_SSID0x83ae9a88: DisassocCFM 0x83ae9a88: Connection lost: indicated to NDIS0x83ae9a88: Unknown: DEBUGCHK failed in file d:\macallan\private\winceos\comm\ndis51\sys \miniport.c at line 3318 0x83ae9a88: DEBUG_BREAK @01c29684 MD=1f Ignored. 0x83ae9a88: Unknown: DEBUGCHK failed in file d:\macallan\private \winceos\comm\ndis51\sys\miniport.c at line 3753 0x83ae9a88: DEBUG_BREAK @01c29f88 MD=1f Ignored. 0x83ae9a88: PHGHHAL_EVNT_DISCONNECT0x83ae9a88: PHGHHAL_EVNT_DISCONNECT0x83ae9a88: Connection lost: indicated to NDIS0x83ae9a88: Unknown: DEBUGCHK failed in file d:\macallan\private \winceos\comm\ndis51\sys\miniport.c at line 3318 0x83ae9a88: DEBUG_BREAK @01c29684 MD=1f Ignored. 0x83ae9a88: Unknown: DEBUGCHK failed in file d:\macallan\private \winceos\comm\ndis51\sys\miniport.c at line 3753 0x83ae9a88: DEBUG_BREAK @01c29f88 MD=1f Ignored. 0x83cf2dac: Connection lost: indicated to NDISc: OID_802_11_SSID0x83ab7400: ZCF:: LogEvent new list selected.. Close current EAPOL session for [].. Tag: USB RNDIS Device Tag: 102712
  - 5
    - Running from RAM, demand paging Hi. I'm trying to run everything from RAM, all the time. I seem to be having problems. On startup, if a compact flash is present, and it contains an, .exe, we do a CreateFile on it. Windows CE nicely creates a copy in RAM, in the object store, and ignores the one in flash. We discovered that when we do this, we get a *dramatic* performance improvement. A device driver ran twice as fast. I'm assuming what we are doing is faster because we are running from RAM. I'm assuming that otherwise Windows CE loads + unloads the code from flash to RAM as necessary. I would like to make all our code load from flash into RAM on startup (or on first use) and stay there running in RAM forever. I tried setting ROMFLAGS = 0x0001 in config.bib, which I think is supposed to run everything in kernel mode and disable demand paging. I cleaned everything, deleted CESysGen and release directories, and rebuilt... but I got no increase in speed, at all. Any suggestions? Thanks Andy Tag: USB RNDIS Device Tag: 102704
  - 6
    - LCD Backlight Control I am trying to develop backlight control driver using the power manager user_active and user_inactive timers and I am running into problems. The backlight turns OFF when the user_inactive event is triggered and suppose to turn ON when there is user activity. The backlight turns OFF after the timeout 15 secs set in the display backlight TAB, but the backlight does not turn back ON if I leave the system sit with no user activity for more that a minute. I am using the following code below: Need help understanding PM activity timers. Do I have to reset or set to the inactive and user_active events? SetThreadPriority(GetCurrentThread(), THREAD_PRIORITY_HIGHEST); hInactivityTimer = OpenEvent(EVENT_ALL_ACCESS , FALSE, _T("PowerManager/UserActivity_Inactive")); if(hInactivityTimer == NULL) { DEBUGMSG(1,(TEXT("hInactivityTimer not present\r\n"))); OutputDebugString(L"ERROR:PWR_SysInactivityThread UserActivity_Inactive not present - "); } hActivityTimer = OpenEvent(EVENT_ALL_ACCESS , FALSE, _T("PowerManager/ UserActivity_Active")); if(hInactivityTimer == NULL) { DEBUGMSG(1,(TEXT("hactivityTimer not present\r\n"))); OutputDebugString(L"ERROR:PWR_SysInactivityThread UserActivity_Active not present - "); } // Loop until exit request is signaled while (TRUE) { dwBacklightTimeout = 0; if (RegOpenKeyEx(HKEY_CURRENT_USER, _T("ControlPanel\\Backlight"), 0, KEY_READ, &hKey) != ERROR_SUCCESS) { OutputDebugString(L"ERROR:PWR_SysInactivityThread Open Registry FAILED - "); return 0; } size = sizeof(dwBacklightTimeout); if(!CheckACPowerOn()) { if(RegQueryValueEx(hKey, _T("BatteryTimeout"), NULL, NULL, (PUCHAR)&dwBacklightTimeout, &dwLen) != ERROR_SUCCESS) { OutputDebugString(L"ERROR:PWR_SysInactivityThread Open Registry Key BatteryTimeout FAILED - \r\n"); return 0; } } else { if(RegQueryValueEx(hKey, _T("ACTimeout"), NULL, NULL, (PUCHAR)&dwBacklightTimeout, &dwLen) != ERROR_SUCCESS) { OutputDebugString(L"ERROR:PWR_SysInactivityThread Open Registry Key BatteryTimeout FAILED - \r\n"); return 0; } } dwStatus = WaitForSingleObject(hInactivityTimer, INFINITE ); if(dwStatus == WAIT_OBJECT_0) { dwBacklightTimeout *= 1000; dwActiveStatus =WaitForSingleObject(hActivityTimer, dwBacklightTimeout); if(dwActiveStatus == WAIT_TIMEOUT) { //Turn OFF Backlight *(int *)0xB6000080 |= 0x4000; dwStatus = WaitForSingleObject(hActivityTimer, INFINITE); if(dwStatus == WAIT_OBJECT_0 ) { //TURN Backlight ON *(int *)0xB6000080 &= 0x9FFF; } RegCloseKey(hKey); Tag: USB RNDIS Device Tag: 102699
  - 7
    - NDIS Miniport driver initialization Greetings, I've got a SDIO-WLAN card for which I have a NDIS Miniport driver. I'm using WinCE 5.0 and have built the driver properly in Platform Builder, and it's part of the NK image that gets loaded on my device. While running the Release version of my image I saw that the driver wasn't fully initializing. I then built a Debug version of the image and have the following relevant debug messages.. === 4294775509 PID:3f5078e TID:3f5076a 0x83f50528: >>> Loading module irsir.dll at address 0x03E70000-0x03E82000 (RW data at 0x01FF4000-0x01FF4660) 4294775545 PID:3f5078e TID:3f5076a 0x83f50528: ==>NdisInitializeWrapper 4294775546 PID:3f5078e TID:3f5076a 0x83f50528: <==NdisInitializeWrapper 4294775553 PID:3f5078e TID:3f5076a 0x83f50528: ==>NdisMRegisterMiniport: NdisWrapperHandle 00051CF0 4294775554 PID:3f5078e TID:3f5076a 0x83f50528: ==>ndisRegisterMiniportDriver: NdisWrapperHandle 00051CF0 4294775555 PID:3f5078e TID:3f5076a 0x83f50528: <==ndisRegisterMiniportDriver: MiniBlock 00051D60 4294775556 PID:3f5078e TID:3f5076a 0x83f50528: NdisMRegisterMiniport: MiniBlock 00051D60 4294775557 PID:3f5078e TID:3f5076a 0x83f50528: <==NdisMRegisterMiniport: MiniBlock 00051D60, Status 0 4294775558 PID:3f5078e TID:3f5076a 0x83f50528: 4294775560 PID:3f5078e TID:3f5076a 0x83f50528: ndisMInitializeAdapter: Miniport 00051F60, 4294775571 PID:3f5078e TID:3f5076a 0x83f50528: ==>ndisQueueMiniportOnDriver: Miniport 00051F60, MiniBlock 00051D60 4294775572 PID:3f5078e TID:3f5076a 0x83f50528: <==ndisQueueMiniportOnDriver: Miniport 00051F60, MiniBlock 00051D60, rc 1 4294775575 PID:3f5078e TID:3f5076a 0x83f50528: COM_Close: (0 handles) total RX 0, total TX 0, dropped (mdd, pdd) 0,0 4294775576 PID:3f5078e TID:3f5076a 0x83f50528: ==>NdisMSetAttributesEx: Miniport 00051F60 4294775593 PID:3f5078e TID:3f5076a 0x83f50528: >>> Loading module asyncmac.dll at address 0x03B00000-0x03B10000 (RW data at 0x01FC7000-0x01FC7988) 4294775629 PID:3f5078e TID:3f5076a 0x83f50528: ==>NdisInitializeWrapper 4294775630 PID:3f5078e TID:3f5076a 0x83f50528: <==NdisInitializeWrapper 4294775631 PID:3f5078e TID:3f5076a 0x83f50528: ==>NdisMRegisterMiniport: NdisWrapperHandle 00052870 4294775632 PID:3f5078e TID:3f5076a 0x83f50528: ==>ndisRegisterMiniportDriver: NdisWrapperHandle 00052870 4294775633 PID:3f5078e TID:3f5076a 0x83f50528: <==ndisRegisterMiniportDriver: MiniBlock 000528E0 4294775634 PID:3f5078e TID:3f5076a 0x83f50528: NdisMRegisterMiniport: MiniBlock 000528E0 4294775635 PID:3f5078e TID:3f5076a 0x83f50528: <==NdisMRegisterMiniport: MiniBlock 000528E0, Status 0 4294775636 PID:3f5078e TID:3f5076a 0x83f50528: 4294775638 PID:3f5078e TID:3f5076a 0x83f50528: ndisMInitializeAdapter: Miniport 00052AF8, 4294775649 PID:3f5078e TID:3f5076a 0x83f50528: ==>ndisQueueMiniportOnDriver: Miniport 00052AF8, MiniBlock 000528E0 4294775650 PID:3f5078e TID:3f5076a 0x83f50528: <==ndisQueueMiniportOnDriver: Miniport 00052AF8, MiniBlock 000528E0, rc 1 4294775652 PID:3f5078e TID:3f5076a 0x83f50528: ==>NdisMSetAttributesEx: Miniport 00052AF8 4294775654 PID:3f5078e TID:3f5076a 0x83f50528: ASYNCMAC:MpQueryInfo: OID 0x10116/Unknown OID not supported 4294775656 PID:3f5078e TID:3f5076a 0x83f50528: ASYNCMAC:MpQueryInfo: OID 0xFD010100/Unknown OID not supported === These are for two other Miniport drivers that seem to load properly. However, when my driver loads up, I see the called to NdisMInitializeWrapper() being acknowledged and I also see the NdisMRegisterMiniport() being acknowledged. But at this point in time my InitializeHandler function should be getting called and I should see an indication of this by the debug message: "ndisMInitializeAdapter: Miniport XXXXXX" or something. But as you can see, I don't have anything like that. From there the driver is essentially ignored and the WinCE image fully loads with no WLAN access. Here's the log === 4294775788 PID:3f5078e TID:3f5076a 0x83f50528: >>> Loading module sdiowlan.dll at address 0x010E0000-0x011A5000 4294775790 PID:3f5078e TID:3f5076a 0x83f50528: MRVDRVND5: DLL_PROCESS_ATTACH 4294775791 PID:3f5078e TID:3f5076a 0x83f50528: [SDIOWLAN] INIT - Enter DriverEntry 4294775792 PID:3f5078e TID:3f5076a 0x83f50528: [SDIOWLAN] *** Driver version 3.2 *** 4294775793 PID:3f5078e TID:3f5076a 0x83f50528: [SDIOWLAN] *** Built on Jl1 071:21 1:21 *** 4294775793 PID:3f5078e TID:3f5076a 0x83f50528: ==>NdisInitializeWrapper 4294775794 PID:3f5078e TID:3f5076a 0x83f50528: <==NdisInitializeWrapper 4294775795 PID:3f5078e TID:3f5076a 0x83f50528: ==>NdisMRegisterMiniport: NdisWrapperHandle 00053450 4294775796 PID:3f5078e TID:3f5076a 0x83f50528: ==>ndisRegisterMiniportDriver: NdisWrapperHandle 00053450 4294775798 PID:3f5078e TID:3f5076a 0x83f50528: <==ndisRegisterMiniportDriver: MiniBlock 000534C0 4294775799 PID:3f5078e TID:3f5076a 0x83f50528: NdisMRegisterMiniport: MiniBlock 000534C0 4294775799 PID:3f5078e TID:3f5076a 0x83f50528: <==NdisMRegisterMiniport: MiniBlock 000534C0, Status 0 4294775800 PID:3f5078e TID:3f5076a 0x83f50528: [SDIOWLAN] <== DriverEntry: register miniport success === Any ideas on how I can debug this??? Regards Tag: USB RNDIS Device Tag: 102698
  - 8
    - Mainstone III - I2C Driver bug. The mainstone code is using 4030_0000 as the base for the I2C controller. Would 4030_1680 be more appropriate ? Tag: USB RNDIS Device Tag: 102695
  - 9
    - Watch Free Satellite TV On Your PC <HTML> <HEAD> <META NAME="GENERATOR" Content="Microsoft DHTML Editing Control"> <TITLE></TITLE> </HEAD> <BODY> <P> </P> </BODY> </HTML> Tag: USB RNDIS Device Tag: 102693
  - 10
    - windows CE 6.0 1024x768 Hi !! I have to work with the latest WinCE 6.0 available with VS2005 which includes platform builder. I have to design some GUI with the screen resolution of 7024x768. For that I have to make my custom OS Image which should support this resolution using PB. Can any one have any idea How can I achieve this using Platform builder. I also found one skin Option was there from where I think it is possible to achieve this resolution. But again the problem is same. I need to find such skin having such resolution. Dose anyone have any idea. Kindly share with me Regards Navin Salunke Tag: USB RNDIS Device Tag: 102690
  - 11
    - MSFlash StrataFlash Hi all, I have a question about MSFlash StrataFlash NOR driver. I want to include that flash driver in my platform. I'm using wince 6.0, MainstoneIII, PXA270, 64MB P33B flash, MCPII_MODULE. My Image is stored in flash, but gets copied to ram and run from ram. My goal is to save 2MB of flash in the area of 57-59 MB. That area is way after the image end, and also not too close to flash end. In the catalog I selected : Core OS\CEBASE\File Systems and Data Store\File System-Internal\ROM-only File System, and from the same place: Registry Storage\Hive-based Registry. In the file platform.reg I have the following settings: [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\StrataFMD] "Dll"="stratad.dll" "Prefix"="DSK" "Profile"="MSFlash" "IClass"="{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" "BlockSize"=dword:40000 "WriteBufferSize"=dword:40 "IsPairedFlash"=dword:1 "FriendlyName"="MSFLASH Driver" "Order"=dword:1 "MemBase"=dword:BE300000 "MemLen"=dword:00200000 [HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\MSFlash] "DriverPath"="Drivers\\BuiltIn\\StrataFMD" "LoadFlags"=dword:2 "Order"=dword:0 "BootPhase"=dword:2 [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash] "Name"="MSFLASH for STRATAFLASH" "Folder"="NOR Flash" "MountPermanent"=dword:0 "FileSystem"="fatfsd.dll" "AutoMount"=dword:1 "AutoPart"=dword:1 "AutoFormat"=dword:1 "PartitionDriver"="mspart.dll" "Util"="fatutil.dll" [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash\FATFS] "MountAsRom"=dword:0 "MountAsHidden"=dword:0 "MountAsRoot"=dword:1 "MountAsBootable"=dword:1 "FormatTfat"=dword:1 "CheckForFormat"=dword:1 "Flags"=dword:00000024 "MountFlags"=dword:2 When trying to download the image, just before the end of download, I get a message: FILESYS: Waiting for bootable file system to be mounted. That message continues forever, and the image downloading process doesn't end. What is the problem, and what can I do fix it? Thank you very much Tag: USB RNDIS Device Tag: 102687
  - 12
    - Queries on DMA Few queries on DMA 1) What is a Burst size in DMA 2) What is the beat size for DMA 3) The DMA can have n beats/burst . What does it mean? 4) If i want to transfer 32 bytes of data and the burst size is 4 beats/burst then what should the beat size? 5) Do the source and destination bus width also effect the above computation? Thanks and Regards Mohammed Anwar P.S. If anyone can give me a link to web resource where i can find some explanation on the above then it would be very helpful too Tag: USB RNDIS Device Tag: 102683
  - 13
    - CE5: PCMCIA Smartcard driver sometimes not loading / ActivateDeviceEx with GetLastError=2 Hi, we have the problem that on a WindowsCE 5.0 system (not WindowsMobile) the driver for a PCMCIA-based smartcard reader is sometimes not loaded. Most of the time it works well, but on some occasions the driver's dll isn't loaded during system startup (either reset or wake from suspend). When it did load during startup the driver keeps working just fine. We've tracked it down to the fact the the PCMCIA card is still recognized by the system (it finds the cards name in the registry) but the driver's dll isn't loaded - no call to XXX_Init, not even loading of the DLLs main entry point. As far as we understand, pcmcia.dll does a LoadDriver/loadLibrary on the readers driver-dll and that simply never happens - or it doesn't succeed. To track it down we've written a tool to load the driver manually. In cases where the driver does not load at all ActivateDeviceEx returns with GetLastError==2 which is a strange error result!!!! Of course the drivers dll is still in \Windows and a LoadLibray on it still works fine. Can anybody shed some light on what is happening inbetween detecting the PCMCIA card and the loading of the drivers DLL? Or even better any ideas on what could cause the drivers DLL not being loaded at all? Thanks Thorsten Tag: USB RNDIS Device Tag: 102682
  - 14
    - PCL Printer Hello, O.S - wince 6.0. PCL printer driver in the catalogue item of wince 6.0 is missing, which is present in wince 5.0. But still the registry entries are present in common.reg(6.0). So how to add support for printer driver in wince 6.0??? Thanks and regards, Sankarraj, S Tag: USB RNDIS Device Tag: 102681
  - 15
    - about the video in mainstone3 HIi,everybody May you help me ? I have a question: I code a camer driver based on mainstion3/intel pxa270/windows mboile 5 ppc.I use the uyvy422 package format for the input and output format.In adapters.h, i change some settings: #define DEFAULT_VIDEO_WIDTH 320//176 #define DEFAULT_VIDEO_HEIGHT 240//144 #define DEFAULT_STILL_WIDTH 1280 #define DEFAULT_STILL_HEIGHT 1024 #define DEFAULT_CAPTURE_WIDTH 320//176 #define DEFAULT_CAPTURE_HEIGHT 240//144 #define DEFAULT_CAMERA_INPUT_FORMAT (XLLP_CAMERA_IMAGE_FORMAT_YCBCR422_PACKED ) //#define DEFAULT_CAMERA_OUTPUT_FORMAT (XLLP_CAMERA_IMAGE_FORMAT_YCBCR422_PLANAR ) #define DEFAULT_CAMERA_OUTPUT_FORMAT (XLLP_CAMERA_IMAGE_FORMAT_YCBCR422_PACKED ) about still,i have 5 resolutions:qqvga/qvga/vga/xga/sxga.vidoe has 2 resolutions:qqvga/qvga.I always use qvga as the preview resolution.And the still pin and capture pin both use the same resolution about qqvga/ qvga. Now, i use pimg.exe(include wm5) to test camera driver,The still and preview functions are ok.However,when chang from preview to video(clieck the mode menu),it always pop a dialogbox and prompt "unable complete the requested action. Out of memory".Look out the debug informations, I find that the video format negotiation fail. The client(directshow) useCSPROPERTY_PIN_DATARANGES to get resolutions and then use CSPROPERTY_PIN_DATAINTERSECTION to send driver format list to match. Driver find the matched format and send back .But the direct show always repeat these steps. Can you help me ? thansk Tag: USB RNDIS Device Tag: 102679
  - 16
    - Compact Flash Card Hangs Device Our platform is a PXA255 CE 4.2 with two Compact Flash Slots (CFS1 & CFS2). The device normally starts up by loading a CE 4.2 image into RAM that is stored on a CF memory card and inserted into CFS1. We desire to add WiFi connectivity to our legacy product by inserting a WLAN adpater into our normally unused CFS2. The WLAN driver has been successfully added to the CE 4.2 image, however, the problem is that our device experiences a hung state when we start with the WLAN adapter inserted into CFS2. Based on further testing, there appears to be a contention issue between CFS1 and CFS2 with CFS1 being given priority. For our implementation, we must have the WLAN adapter operate on CFS2. The following tests are the best method I know to describe the situation. Test #1 *** Failure *** 1. Insert memory card into CFS1 2. Insert WLAN adapter into CFS2 3. Power device 4. Device starts up into a hung state shortly after displaying the CE desktop. Display will blank out. 5. Remove the WLAN adapter from CFS2 (or apply 3.3V to the CFS2 WAIT line) and the CE desktop re-appears. Note: this test represents the problem as we must startup and operate with WLAN adapter preinserted into CFS2. Test #2 *** Success *** 1. Insert memory card into CFS2 2. Insert WLAN adapter into CFS1 3. Power device 4. Device startup succeeds with WiFi connectivity. Test #3 *** Success *** 1. Insert memory card into CFS1 2. Power device 3. Device starts up into CE desktop 4. Remove memory card from CFS1 5. Insert WLAN adapter into CFS2 6. Device succeeds with WiFi connectivity Test #4 *** Success *** 1. Insert memory card into CFS2 2. Power device 3. Device start up into CE desktop 4. Remove memory card from CFS2 5. Insert WLAN adapter into CFS2 6. Device succeeds with WiFi connectivity Note: CFS1 remains unused during Test #4. Any ideas on how to resolve the hung state being experienced with Test #1? Thanks. Tag: USB RNDIS Device Tag: 102678
  - 17
    - about bluetooth question,help Dear all: I have a CSR's BC41B143A06 bluetooth module. I connected it to PXA255's BTUART. I only want it can send/recevice data or file or activesync PC. so what bluetooth profiles support should I added to workspace,Bluetooth PAN or other? and what bluetooth protool stack with transport driver should I added to workspace, bluetooth stack with integrated CSR Chipset Driver or other? to make it work, need i change any registry? and how about PSKEY. btw,I work in WinCE5.0. Thanks for any help. Tag: USB RNDIS Device Tag: 102676
  - 18
    - WinCE 5 using USB RNDIS : LAN vs. W-LAN how to ? Dear experts, I have read carefully through all the available to me archive of this newsgroup on this topic and still unable to get things working right, even though several articles did report that it should. A while ago I have tried that and posted some questions, several people replied with useful info, but it still didn't work, now is the second round. What is under investigation: Windows CE5 as Platform Builder with a cumulative annual QFE applied dated 12-31-2006. That should take care of many things I guess... Goal is to make the USB rndis working right. The rndis device used is U.S.Robotics USR5421 USB to wireless LAN stick. Tested on PC and proven to work ok. Based on what I have read on this topic, the following environment variables were added to enable USB rndis support to either platform set SYSGEN_USBFN_NET2280=1 set SYSGEN_ETH_USB_HOST=1 set SYSGEN_USBFN_ETHERNET=1 set SYSGEN_ETH_8021=1 set SYSGEN_NWIFI_STA=1 this should take care of everything needed ( if I understand it correctly). Two development boards with : 1 --- ARM processor. Has 1 USB port. Built image (using command line) has standard explorer shell. Cmd line is supported, so one can type commands directly on the device. USB port correctly functions and recognizes both USB storage devices and USB printers. There is on-board Ethernet adapter already as well on-board wireless LAN adapter as well, for which 3rd party drivers are used. Upon insertion of USR5421 into device's USB port no visual effects are seen, but "power" led on the USR5421 comes on, antenna light stays off. Taskbar is showing a new network adapter, as well as control panel->Networking gets another network adapter applet. Question to this one: a) what do I miss in terms of why does the USR5421 is detected as wired LAN adapter instead of wireless one ? b) when using command line and trying to launch wireless zero configuration tool, an error is returned >wzctool -e WZCEnumInterfaceg() error 0x00000002 2 --- VIA Luke (x86 like). Has 4 USB ports. Built image (using Platform Builder) has custom shell. No cmd line is supported in image. USB port correctly functions and recognizes both USB storage devices and USB printers. There is on-board Ethernet adapter already. Upon insertion of USR5421 into device's USB port a pop-up dialog shows up, prompting to provide a driver name for unidentified USB device. Typing in the name of the dl lit should use, i.e. usb8023.dll, causes the dialog to pop up immediately back again and so forth indefinitely if repeated. Question to that one: and why is that one not recognizing USR5421 at all, while the same environment variables were added to build ? Please advise where to look. Many thanks Sergei R Tag: USB RNDIS Device Tag: 102667
  - 19
    - new to WinCE I have WinCE 5.0 installed. Do I need to use ActiveSync and eVC4.0 to develop my WinCE target? I am new to WinCE please point out direction to start. Thank you in advance Richard Tag: USB RNDIS Device Tag: 102661
  - 20
    - Does WinCE 4.2 support Cyrillic font? Hi All, Does anyone know whether or not WinCe 4.2 supports Cyrillic font? I checked fonts catalog in CE 4.2 PB, but couldn't find it. If I want to include this font in the OS, how I can do it? Thanks, James Tag: USB RNDIS Device Tag: 102659
  - 21
    - Compile errors on simple voipmanager calls Hi For platform builder and WinCE 5.0. Note the image is voip enabled, and voipmanager.h is in local directory I don't know why this app doesn't compile. I'm trying to make a call into voipmanager.h without luck. The app doesn't do anything, the purpose is simply to make a successful call into the voipmanager. MY CODE /////////////////////////////////////////////////////////////////////////////////////////////////////// #include "stdafx.h" #include "voipmanager.h" int _tmain(int argc, TCHAR *argv[], TCHAR *envp[]) { MSG msg; IVoIPMgr *piMgr = NULL; HRESULT hr = S_OK; const WCHAR *c_wszErr = NULL; hr = CoInitializeEx(NULL, COINIT_MULTITHREADED); hr = CoCreateInstance(CLSID_VoIPMgr, NULL, CLSCTX_INPROC_SERVER, IID_IVoIPMgr, (void**)&piMgr); while( GetMessage(&msg, 0, 0, NULL) ){ TranslateMessage(&msg); DispatchMessage(&msg); } if (piMgr != NULL) { piMgr->Release(); piMgr = NULL; } CoUninitialize(); return (SUCCEEDED(hr)) ? 0 : hr; } /////////////////////////////////////////////////////////////////////////////////////////////////////// THE BUILD LOG /////////////////////////////////////////////////////////////////////////////////////////////////////// Starting Build: set WINCEREL=1&&build -c ============== BUILD: [Thrd:Sequence:Type ] Message BUILD: [00:0000000000:PROGC ] Checking for \WINCE_500\sdk\bin\i386\srccheck.exe. BUILD: [00:0000000001:PROGC ] SrcCheck exit code: 0 (dec). BUILD: [00:0000000002:PROGC ] Compile and Link for ARM. BUILD: [00:0000000003:PROGC ] Loading S:\WINCE_500\PBWorkspaces\MX31Mobility\Console\Build.dat. BUILD: [00:0000000004:PROGC ] Done. BUILD: [00:0000000005:PROGC ] Computing include file dependencies: BUILD: [00:0000000006:PROGC ] Checking for SDK include directory: S:\WINCE_500\sdk\ce\inc. BUILD: [00:0000000007:PROGC ] Scan \WINCE_500\PBWorkspaces\MX31Mobility\Console\ BUILD: [00:0000000009:PROGC ] Saving S:\WINCE_500\PBWorkspaces\MX31Mobility\Console\Build.dat. BUILD: [00:0000000011:PROGC ] Compiling \WINCE_500\PBWorkspaces\MX31Mobility\Console\ directory. BUILD: [01:0000000018:PROGC ] Create precompiled header StdAfx.h obj\ARMV4I\retail\StdAfx.obj S:\WINCE_500\PBWorkspaces\MX31Mobility\Console\obj\ARMV4I\retail\StdAfx.pch BUILD: [01:0000000021:PROGC ] Compiling .\Console.cpp BUILD: [00:0000000027:PROGC ] Linking \WINCE_500\PBWorkspaces\MX31Mobility\Console\ directory. BUILD: [01:0000000035:PROGC ] Linking obj\ARMV4I\retail\Console.exe BUILD: [01:0000000052:ERRORE] Console.obj : error LNK2019: unresolved external symbol CoUninitialize referenced in function wmain BUILD: [01:0000000053:ERRORE] Console.obj : error LNK2019: unresolved external symbol CoCreateInstance referenced in function wmain BUILD: [01:0000000054:ERRORE] Console.obj : error LNK2019: unresolved external symbol CoInitializeEx referenced in function wmain BUILD: [01:0000000055:ERRORE] Console.obj : error LNK2001: unresolved external symbol IID_IVoIPMgr BUILD: [01:0000000056:ERRORE] Console.obj : error LNK2001: unresolved external symbol CLSID_VoIPMgr BUILD: [01:0000000057:ERRORE] obj\ARMV4I\retail\Console.exe : fatal error LNK1120: 5 unresolved externals BUILD: [00:0000000063:PROGC ] Files Warnings Errors BUILD: [00:0000000064:PROGC ] Midl 0 0 0 BUILD: [00:0000000065:PROGC ] Resource 0 0 0 BUILD: [00:0000000066:PROGC ] Message 0 0 0 BUILD: [00:0000000067:PROGC ] Precomp Header 1 0 0 BUILD: [00:0000000068:PROGC ] C/Cpp/Cxx 1 0 0 BUILD: [00:0000000069:PROGC ] Assembler 0 0 0 BUILD: [00:0000000070:PROGC ] Static Libraries 0 0 0 BUILD: [00:0000000071:PROGC ] Dll's 0 0 0 BUILD: [00:0000000072:PROGC ] Exe's 1 0 6 BUILD: [00:0000000073:PROGC ] Resx 0 0 0 BUILD: [00:0000000074:PROGC ] Csharp Targets 0 0 0 BUILD: [00:0000000075:PROGC ] Other 0 0 1 BUILD: [00:0000000076:PROGC ] BUILD: [00:0000000077:PROGC ] Total 3 0 7 BUILD: [00:0000000078:PROGC ] BUILD: [00:0000000079:PROGC ] 0 Warnings, 7 Errors Build for Windows CE (Release) (Built on Apr 14 2005 13:54:39) File names: Build.log Build.wrn Build.err Build.dat MX31Mobility - 6 error(s), 0 warning(s) /////////////////////////////////////////////////////////////////////////////////////////////////////// I think that I'm not using the voipmanager interface correctly. But how then do I make RTC API calls? Thanks in advance Marcel Tag: USB RNDIS Device Tag: 102651
  - 22
    - How to check if repllog is running Hello How can I find out whether repllog.exe is already running or not? PB5.0, ARM. TIA -- Michael Reim reim AT helmut-fischer DOT de Tag: USB RNDIS Device Tag: 102649
  - 23
    - About Power Manager I have some questions. How do I know what kind of system power which I use, If I add two PM models (Default and PDA)? How to modify the mapping of system power state to device power state without modify common.reg? Please give me advise. Best regards Tag: USB RNDIS Device Tag: 102648
  - 24
    - Hopper test Hi all, I know that the Hopper tool is for Windows Mobile environment Is it possible to "port" this tool on Win CE 5.0? Thank you in advance Regards Ale Tag: USB RNDIS Device Tag: 102647
  - 25
    - ie.exe erorr When I will open website like yahoo,google geting erorr 0x7c901010 please help me Tag: USB RNDIS Device Tag: 102644
- Next
  - 1
    - Bluetooth UART transport bug CE 6.0 When the UART transport initializes, HCI_OpenConnection calls SetupComm(hFile,&dcb) with dcb.XonLim == 3000, dcb.XoffLim == 9000. In the serial MDD layer this call resolves to ApplyDCB where the following check is performed ( this code was not present in CE 5.0 ): if (!(pDCB->XoffLim< pSerialHead->RxBufferInfo.Length && pDCB->XonLim< pSerialHead->RxBufferInfo.Length - pDCB->XoffLim )) { return FALSE; } Since pSerialHead->RxBufferInfo.Length will typically default to RX_BUFFER_SIZE ( i.e. 2048 ) HCI_OpenConnection will return FALSE. Tag: USB RNDIS Device Tag: 102643
  - 2
    - Miniport problem Hi. I have built a miniport driver (PB 4.2) in order to have a system that works like a router. I have my router and two pcs connected to it, and everything works well with ping, telnet or FTP, except when I try to transfer 2 files at the same time from one pc to the other, the files are transferred, and I am still able to communicate between the two computers (ping, telnet or ftp) but with the device running my router and wce I am only able to ping, if I try to do an FTP or Telnet it doesnâ??t work, it seems like the stack ip it is not working well. I am sure that I am doing something wrong, but my problem is to know what am I doing wrong. Is there any way to see what is going wrong? I have tried to run my driver in debug mode to see if I could catch some DEBUGMSG, but I got nothing. Could someone give any ideas on how to see whatâ??s happening? Thanks in advance. Duarte. Tag: USB RNDIS Device Tag: 102639
  - 3
    - MFC in a MUI platform Hello I have a WinCE 5.0 MUI platform for ARM including the MFC. It's possible to switch the language of the user interface to languages other than english. The only thing that doesn't switch is the MFC. All messages of the MFC remain in english. I found that under E:\WINCE500\OTHERS\MFC\LIB\ARMV4I\L.DEU there are the MFC resources for e.g. the german language. I get the german messages by copying mfcce400i.dll to \Windows\mfcce400.dll.0407.mui on the device. So my question is, what is the recommended way to get the different language versions of the MFC into my image? TIA -- Michael Reim reim AT helmut-fischer DOT de Tag: USB RNDIS Device Tag: 102638
  - 4
    - Has the DirectShow Ksproxy filter been supported in wince5.0??? The wince5.0 has not supported the video capture filter, so I want to use the Ksproxy filter to camera capture implement .but I have not found it in ce5.0 helper. So I want to know if the the DirectShow Ksproxy filter has been supported in wince5.0. Tag: USB RNDIS Device Tag: 102633
  - 5
    - Problem Installing Platform Builder 4.2 on XP SP2 I'm having a problem installing Platform Builder 4.2 on XP SP2. The Error: Error 1305. Error reading from file C:\WINCE420\PUBLIC\COMMON\OAK\LIB\ARMV4I\DEBUG\kbd8042jpn1_lib.lib. Verify that the file exists and that you can access it. This file is installed by the installer, and is present. I cannot view or copy the file as the result is a permission denied error. I can only assume that something is going wrong in the install and something that is supposed to release a lock on the file still has it or has crashed half-way through (without giving me an error.) Has anyone seen this before? It actually shows this file as a file a file that it is copying when it gives there error. Brad. Tag: USB RNDIS Device Tag: 102632
  - 6
    - Power Applet does not get updated on wince-5.0 Hello, On my custom board(imx31) based on wince-5.0 does not update the power applet. It always shows charging. But in the BatteryThreadProc() function in the battdrvr.c, I could find that the call to the function BatteryAPIGetSystemPowerStatusEx2() returns the correct status of the battery.That is it returns charging/not charing/external power etc. correctly. But somehow the power applet is not getting updated. I have commented out call to PowerPolicyNotify() when there is any change in battery status since when I call this function it returns with error that the "service has not been started". Does the call to PowerPolicyNotify() required to updated the power applet? On my system pm.dll is loaded and running. Could someone help me on this issue. Thanks, Shiju Tag: USB RNDIS Device Tag: 102630
  - 7
    - How can I cretat dll out of CE components/packages Hello All, I would like make Windows Mobile 5.0 to have some features available on Windows CE OS. You can choose needed packages in CE during initial making of BSP. But can I take those components and make it into dll or some thing else and install into Windows Mobile 5.0 For example I am interested in Supporting Httpd with ASP engine, VB, Java Scripts engine etc. Is it Possible to get them in dll form? Tag: USB RNDIS Device Tag: 102627
  - 8
    - Getting started with RTC API Hi This problem is for Windows CE 5.0 platform builder. I need some help getting started. (I'm obviously missing something so please help) I want to make calls to the RTC API and even the VAIL API for that matter from a third party application (in this case a WinDev Mobile application ~not important~). The reason why it is not clear exactly what must be included and called from my application is because I don't know exactly which files are used and needed to compile the dll's that provide VoIP functionality. So to be more specific: Is the entire RTC API accessible through rtccore.dll? if not, what else do I need? And what files are used to compile this dll? What about VAIL API, there is no dll? Even though the documentation tells you what interfaces to call, I don't know what I need to include in my app. (And the process of adding files to get rid of compilation errors is driving me crazy) I've not found anything of much help on MSDN, and I've read up on RTC etc on Platform builder help. Not helping too much. I can't imagine that it's too complicated, so please help me get started with making calls to RTC and VAIL API's in its simplest form :-) Rgds Marcel Tag: USB RNDIS Device Tag: 102624
  - 9
    - Can I avoid installing .Net Framework 1.1 and still install Platform Builder for CE 5.0? I have .Net Framework 2.0 and .Net Compact Framework 2.0 installed on my machine. It seems a little odd that I have to install .Net Framework 1.1. First, I am already using 2.0, second I am not installing this product to do desktop development, but Windows CE development. Finally, that development will likely be more C++ than .Net anyway. I assume that Platform Builder itself was written in .Net 1.1, but shouldn't it run under 2.0? Pat O Tag: USB RNDIS Device Tag: 102615
  - 10
    - USB and KITL : image download often hangs Hi everybody, We are having problems with downloading an image through USB on our platform. We have implemented USB RNDIS in our bootloader (based on rne_mdd) so that we can download (and also debug) our image through USB. During the developments, we did not have problem with the desktop machine we used for the download, we were able to load big NK.BIN files (tested up to 23MB). We are now trying to download using other desktop machines and the download often hangs after 5MB. It seems that when we have a standalone machine (not connected to the network), the situation is better (but not perfect). When changing USB IDs, the situation is temporarily better. Moreover, some MAC addresses (that we can configure in our bootloader menu) make the download impossible. Using a USB sniffer software on our desktop, the last frame sent is an acknowledge from the device to the desktop. Our hardware platform is based on the S3C2412 processor from Samsung, and the OS is CE5. Desktop PCs are all WindowsXP. Has someone else already had such a problem? Somebody has an idea? Is there a "magic" configuration of the desktop that could solve all our problems? Thanks in advance BR -- -- -- ---------------------------------------------------------------- Anthony Pellerin (eMVP) ADENEO (ADESET) Windows Embedded Consultant <apellerin AT adeneo DOT adetelgroup DOT com> http://www.adeneo.adetelgroup.com Tél : +33 (0)4.72.18.57.77 Fax : +33 (0)4.72.18.57.78 ---------------------------------------------------------------- Tag: USB RNDIS Device Tag: 102611
  - 11
    - How to configure the environment variable like IE_MODULES_WININET Hi all, I have a problem here. I want to modify certain configuration for the Internet Explorer in the Public folder of WINCE500. I want to remove the usage of wininet. Pardon my ignorance, but i think I need to set the enviroment variable of IE_MODULES_WININET to "" then i can exclude it from the build. Can anyone tell me where do i set these setting? Thanks Tag: USB RNDIS Device Tag: 102608
  - 12
    - How to make BINFS partition mounted and visible in explorer? Hi All, I make two partitions on a 64MB NAND flash of my board. MBR at Block 0 part00, BINFS, 16MB part01, FAT32, 47MB After Wince startup, the FAT partition is mounted and visible as a folder named "ResidentNandFlash". But BINFS partition is not mounted, cause I check in Storage Manager, part00 has no "*" mark beside and is not mounted. The following is the relevant registry settings in platform.reg ========================================= [HKEY_LOCAL_MACHINE\System\StorageManager\PartitionTable] "21"="BINFS" "0B"="FATFS" ;MS-DOS FAT32 [HKEY_LOCAL_MACHINE\System\StorageManager\BINFS] "Folder"="BINFS" "FriendlyName"="BIN_FS" "Dll"="binfs.dll" "MountFlags"=dword:0 ;MountAsROM, but not Hidden ; "Paging"=dword:1 "BootPhase"=dword:0 [HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\Nand] "DriverPath"="Drivers\\BuiltIn\\Nand" "LoadFlags"=dword:1 ;LoadFlags 0x01 == load synchronously "MountFlags"=dword:10 "BootPhase"=dword:0 ; "Order"=dword:0 [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Nand] "Prefix"="DSK" "Dll"="NANDDRV.DLL" "Order"=dword:2 ; "Ioctl"=dword:4 "Profile"="Nand" "IClass"="{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" "Flags"=dword:1000 . "FriendlyName"="MSFLASH NAND Driver" "BootPhase"=dword:0 [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\Nand] "DefaultFileSystem"="BINFS" "PartitionDriver"="mspart.dll" "Name"="NAND FlashDisk" "Folder"="ResidentNandFlash" "AutoMount"=dword:1 "AutoPart"=dword:1 "MountFlags"=dword:10 ; "AutoFormat"=dword:1 "BootPhase"=dword:0 [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\Nand\FATFS] ; "Dll"="FATFS.DLL" ; "Util"="FATUTIL.DLL" "MountFlags"=dword:0 "AutoMount"=dword:1 "AutoPart"=dword:1 [HKEY_LOCAL_MACHINE\System\StorageManager\FATFS] "MountFlags"=dword:0 ========================================= Anyone can give me a hint to make BINFS visiable in WINCE explorer? Thanks in advance. D.H Tag: USB RNDIS Device Tag: 102599
  - 13
    - Wince 5.0 Stress Tool Hi, I have run stress tool on wince 5.0 as per the procedure given at http://msdn2.microsoft.com/en-us/library. It is running but i am not able to see where the result log(*.xml) file will be created. Tag: USB RNDIS Device Tag: 102598
  - 14
    - Something may be wrong with the smart device setup CAB file Hi, all: Recently I encountered a strange problem. I built a smart device CAB project via VS.NET 2005. The CAB file is built successfully and the installation is done well. But I found a big problem: the cabwiz application seems not to recognize the same files which is placed in different folders. I have two files which share the same name but with different contexts. I place them in different folders in the CAB project. After installation, these files are not placed into the valid folder. For example, in the setup project, D1 folder contains a file named aaa and D2 folder also contains a file named aaa. Their contents of aaa file is different. After installation, the aaa files are exchanged between D1 folder and D2 folder. Do you encounter such problem ever? I think this should not happened in VS.NET 2005. Hope you can help me. Thanks very much! Tag: USB RNDIS Device Tag: 102594
  - 15
    - PEAP IEEE802.1x authentication on CE4.2 I have two problems with IEEE802.1X authentication (PEAP) on Windows CE 4.2: 1) After a successful authentication to an access point with PEAP, if I try to connect again to the AP (without disconnecting) the platform doesn't authenticate again to the radius server: (Authenticating ... Reauthenticating ... reauthenticating ... with no successful authentication) and the result is the same if i try to connect again. If i watch with a sniffer to the trame exchanged between the AP and the platform, the following sequence occurs: a) the platform tries to start an EAP session b) the AP acknowledge the platform request c) the platform sends his identity d) the AP acknowledge the platform request e) the transaction stops here ! Note: if i connect to another AP with no IEEE802.1X authentication when the problems occurs, there is generally no problem to reconnect to the PEAP AP after. 2) Exceptionnaly, after a boot of the platform or a enable/disable of the wireless card, the connection failed like in 1) but finish after a few time to be established (3 minutes seems to be generally good) I don't know if my two problems are linked, but it is the 2) problem that makes me discover the 1) problem. The platform is an x86 based platform. All the QFE has been applied before building the platform. Best Regards, R=E9mi Tag: USB RNDIS Device Tag: 102593
  - 16
    - PowerPolicyNotify breakpoint on Wince-5.0 Hello, On our custom board when the wince boots it keeps on breaking at the below statement. fOk = PowerPolicyNotify(PPN_POWERCHANGE,0); DEBUGCHK(fOk); Could someone help me what might be the problem and how could I resolve it. Thanks, Shiju Tag: USB RNDIS Device Tag: 102592
  - 17
    - Keyboard filter driver for WM Hi All, i want to write a keyboard filter driver for WM devices. Do we have any sample driver in platform builder? I want to hook the keyboard and eat up the keystrokes. Please do not suggest SetWindowsHookEx as it does not work with many devices. R Tag: USB RNDIS Device Tag: 102590
  - 18
    - Private source code hi all, it is illegal to change the private code of windows ce 6.0 and publishing an article regarding the changes for solving an device specfic issue? Please let me know. Thank you, -- vinoth.R Technical Lead e-consystems India Pvt Ltd www.e-consystems.com Tag: USB RNDIS Device Tag: 102580
  - 19
    - MP3 AVI DIVX MPEG SOFT = www.GEGEREKA.com Millions files for everyone. Music, movies, soft and other media. Check it now!! http://www.gegereka.com Tag: USB RNDIS Device Tag: 102578
  - 20
    - Installation of Windows CE 4.2 Hi all, I'm having WinCE 5.0 and WinCE 6.0 (With VS 2005 SP1) on separate partitions with .NET 1.0 and 2.0 installed. Now i need to install Windows CE 4.2 in my PC. So i want to know, whether i can simply install it in a separate partition or i've to do something before installing. When reinstalling CE 5.0 some months back, i got some issues regarding core con connectivity, but i have solved that. Thats why i'm afraid whether i'll get some problems after installation??? ( Then i've to reinstall all the three :( )What i've to do??? Regards, Mekas :) Tag: USB RNDIS Device Tag: 102566
  - 21
    - 64 bit processor Hi all, O.S-Win CE 4.2. Processor - AMD turion 64 bit I wanted to confirm whether wince 4.2 supports the above processor, since in the wince architecture it has been mentioned has 32-bit operating system??? or any changes required??? Thanks in advance, Regards, Sankarraj, S Tag: USB RNDIS Device Tag: 102564
  - 22
    - DMA driver Hi, I am sort of a newbie to DMA. But now i am supposes to make a DMA driver, basically a driver which will talking to the DMA controler on my board. For this I have few questions 1) What is burst size and how is it related to DMA 2) Would making the DMA driver similiar to a stream interface driver be a correct design? 3) Do I need to modify the API's HalTranslateSystemAddress or HalAllocateCommonBuffer etc for the same 4) What is the difference between a DMA driver and a DMA adapter? Thanks Anwar Tag: USB RNDIS Device Tag: 102562
  - 23
    - How to set up multiple ip addresses on a single network adaptor? Hi, all? I'm finding a way to set up multiple ip addresses on a single ethernet card? How can I build it? Any pointers to related material would be also appreciated. Tag: USB RNDIS Device Tag: 102559
  - 24
    - How to set default cluster size of nand flash at flash memory form Hi, all? I wanna know if there is any way to change the default filesystem or cluster size value when formating nand flash with 'control panel --> storage manager'. Tag: USB RNDIS Device Tag: 102558
  - 25
    - WPA2, AES PB 5.0 Our WLAN driver supports WPA2. We have configured our access point to support WPA2, AES. When I connect with my laptop with WPA/AES type, it is getting connected after I provide USERNAME/PASSWORD/DOMAIN But If I choose the same configuration/credentials in my WINCE device - WPA2/AES/PEAP, popup comes asking for username and password. Even if I give the details correctly, popup keeps coming up asking for the credentials. After few tries it says cancelled authentication. 1) Does this combination is supported in PB5.0 - WPA2/AES ? Following are the settings we were asked to setup by the people who configured AP. The Radius details are as follows: a. Data encryption - AES b. EAP type - PEAP c. No Certificate validation required d. Authentication method - secured password (EAP-MSCHAP.V2) 2) I was able to do the the first three settings(a, b and c) in my wnce device. I assume PEAP authentication always follows EAP-MSCHAP.V2 method. Is that correct ? Tag: USB RNDIS Device Tag: 102557

Hi,

My hardware platform is Samsung 2410, and the OS is CE 4.2.

I have connected my CE device to PC(XP Pro SP2) successfully via
Activesync(USB port).

Now I want connect My CE device to PC via USB RNDIS, Then I want to know
which components should be added to my OS Design in PB.

On the other side, if I want make the CE Device as the USB host, and another
device(an PXA255 device) as the USB Slave. and connect the PXA255 device to
the CE Platform via USB RNDIS. Then I want to know which components should
be added to my OS Design in PB. if net2890 USB function driver can be used?

Thanks.

Dongquan Z

Top