RAMDISK block driver working in WinCE 6.0

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - How to show mouse cursor when using USB mouse on Windows Mobile 6? Hi, All I met a strange question when I use USB mouse on my PXA27X based Pocket PC. I added the registry setting and built a mouhid.dll on WinCE 5.0, it seems that the sytem can get the mouse_event notify by the mouhid.dll, but it does not show the mouse arrow cursor. The Mobile 6 does not include the support of USB mouse, I think it look the mouse as the stylus though I do so. MayI doing CreateCursor() or anthing else in mouhid.dll? Anyone who has some idea about it? Any help is gratefu, thanks a lot. Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103871
  - 2
    - Launch address of Nk.bin Hi, i am trying to jump to the NK.bin downloaded to the ram and i have assigneed address for the following fn launch(address) with the physical address of the NK section in the config.bib file. But while debugging through the JTAG,its jumping but its showing no instructions in that address. i really doubt my address is wrong.Pls clarify my doubt,i know that experts are availble in the group. i would really appreciate any replies in this regard this i am a beginner in windows ce. Following are my queries 1) I really want to have a good insight how the address is fixed 2) what is the functionality of kernelrelocate() (now its commented) since both my eboot.nb0 and NK.bin is in ram and that i downloaded through JTAG Thanking you Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103870
  - 3
    - yet another question about USB RNDIS for Win CE 5 - headless device ? Hello experts, let's put aside all that frustration with efforts to make usb rndis to work on the desired platform under Windows CE 5 for a moment. I just talked to one person who has asked whether that capability of Windows CE 5 to support USB rndis has certain other limitations ( in addition to the troublesome steps to make it work with very mean configuration on an average platform). Specifically, the question was about an embedded device with usb port but having no ui or a quite primitive ui. In short: will usb rndis work on headless device under Windows CE 5 ? Or somehow UI is a must ? If so, for what purpose - just to enter SSID etc - that can be read from a file or done remotely. Or there are other underwater rocks which I don't foresee in this case ? Still true for CE6 ? Anyone who have done that or can shed a light on this is welcome to speak up. Windows CE 5 documentation doesn't say much. Thanks Sergei R Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103869
  - 4
    - Font Alias? We would prefer that our CE image use Arial rather than Tahoma. So I did some digging and ended up adding the following to my project.reg: <code> [HKEY_LOCAL_MACHINE\SYSTEM\GDI\SysFnt] "Nm" = "Tahoma" "Ht" = 10 [HKEY_LOCAL_MAHINE\SYSTEM\GDI\FontAlias] "Tahoma" = "Arial" </code> When I attempt to sysgen I get the following error: regcomp: Overwriting existing value [HKEY_LOCAL_MACHINE\Software \Microsoft\FontLink\SkipTable] "Tahoma" in system registry regcomp: Error: InitRegistry FAILED on or near line 6849 of C: \WINCE500\PBWorkspaces\CirrusTestBedD\RelDir\ep93xx\edb9315a\..\.. \ep93xx_ARMV4I_Release\reginit.ini. makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec). makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec). My questions are 1) where should I look to gain a better understanding of what is wrong? 2) any idea what is wrong? I took these setting from MSDN <http://msdn2.microsoft.com/EN-US/ library/ms901104.aspx> and <http://msdn2.microsoft.com/EN-US/library/ ms901105.aspx>. Pat O Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103866
  - 5
    - CE 6.0 Calibrui Clone Okay, anyone else having problems with cloning the calibrui component in CE 6.0? If I do it using the same method as in CE 5.0, which is to right click on mingdi and select clone, when I build I get an error when it sysgens DCOM. The error is: SysgenMake /NOLOGO oleaut32_custom.dll Unhandled Exception: System.ArgumentException: Illegal characters in path. at System.IO.Path.CheckInvalidPathChars(String path) at System.IO.Path.GetFileName(String path) at System.IO.Path.GetFileNameWithoutExtension(String path) at Microsoft.PlatformBuilder.MainClass.ComputeClonedLibs(String targetLibs, StringDictionary& moduleVars, StringDictionary& environmentVariables, Boolean res2res) at Microsoft.PlatformBuilder.MainClass.Main(String[] args) NMAKE : fatal error U1077: 'SysgenMake' : return code '0xe0434f4d' Stop. We have reproduced this with several projects on several different PCs. If we remove the cloned calibrui, this builds again. -- Bruce Eitman (eMVP) Senior Engineer beitman AT applieddata DOT net Applied Data Systems www.applieddata.net An ISO 9001:2000 Registered Company Microsoft WEP Gold-level Member Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103864
  - 6
    - eboot and checksum errors I am trying to get eboot running, and I see packets going out on the network via Ethereal but Ethereal is complaining of incorrect checksums and on my device console output it is complaining about bad checksums on packets it receiving ? anyone see this before ? I cant get DHCP to give me an address and if I assign an address to the device I see the "bootme" packets but my pc does not respond and again Ethereal is complaining about bad checksums ? Thanks, Joe W. Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103861
  - 7
    - CE 5.0 KITL Question The company I purchased my development platform from has just released a 5.0 BSP. I currently use their 4.2 BSP and I can use the KITL feature to develop apps with emBedded Visual C++. I have just purchased Platform Builder 5.0 and when I try to add KITL to the image, it complains about a missing file "kernkitl.exe". How do I add KITL in 5.0. Should I be contacting the company which provides the BSP for this feature? The processor I'm using is a Samsung 2410. Thanks in advance. Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103840
  - 8
    - WM6 BSP to Embedded Ce 6 Hi, i have a BSP for Windows Mobile 6 (i think it is Embedded CE 5 ?). i want to use this with Embedded CE 6 1- is it possible to use this BSP with Embedded Ce 6. 2- just ignoring files like memory.cfg.xlm, oem.cpm.csv ok? 3- i can't find some files like iplcommon.h in Wince600. 4- is WM6 eboot, ipl and ULDR sections are same with Embedded Ce 6. or any differences ? Thanks Alli Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103824
  - 9
    - HTTPD Password broken Hi I have been having problems with the release build of a CE5 image (XScale pxa255). Firstly we made some modifications to the serial driver to control our extra hardware. This worked on the debug verion, but not when we progressed to release. I then returned to the sample project provided with the BSP, and added our serial driver. This now worked in release, so I continued to strip this project down to produce what we needed. I came to the end of this proceedure, only to discover that the wizard.html page has errors on it. I can see no difference between the projects, has anyone got any idea what may have caused this? Thanks in Advance -- Snr. Des. Eng. Northern Hi-Tec Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103823
  - 10
    - windows ce 5.0 virtual address Hi, Pls help me to understand the windows ce 5.0 virtual address space. What I like to know is, how the 4GB space is mapped in to a device with less physical memory (say 64MB RAM & ROM).In Windows CE 5.0 each process can have 32MB. So with a device with less physical memory (say 64 MB) does it mean that I can run only 2 process? Currently am using the Mainstone kit, it has oal address table as follows. Here as per the table, virtual address of of SDRAM is in range 0x80000000 -> 0x83FFFFFF. So is it mean that a process executing in RAM will only have this virtual address range. What am trying is to undertand the virtual address following table and how it fits in the 4 GB address space.Pls help me to undertand the concept. Regards Bijesh VM g_oalAddressTable DCD 0x80000000, 0xA0000000, 64 ; MAINSTONEII: SDRAM (64MB). DCD 0x84000000, 0x5C000000, 1 ; BULVERDE: Internal SRAM (64KB bank 0). DCD 0x84100000, 0x58000000, 1 ; BULVERDE: Internal memory PM registers. DCD 0x84200000, 0x4C000000, 1 ; BULVERDE: USB host controller. DCD 0x84300000, 0x48000000, 1 ; BULVERDE: Memory controller. DCD 0x84400000, 0x44000000, 1 ; BULVERDE: LCD controller. DCD 0x84500000, 0x40000000, 32 ; BULVERDE: Memory- mapped registers (peripherals). DCD 0x86500000, 0x3C000000, 64 ; BULVERDE: PCMCIA S1 common memory space. DCD 0x8A500000, 0x38000000, 64 ; BULVERDE: PCMCIA S1 attribute memory space. DCD 0x8E500000, 0x30000000, 32 ; BULVERDE: PCMCIA S1 I/O space. DCD 0x90500000, 0x2C000000, 64 ; BULVERDE: PCMCIA S0 common memory space. DCD 0x94500000, 0x28000000, 64 ; BULVERDE: PCMCIA S0 attribute memory space. DCD 0x98500000, 0x20000000, 32 ; BULVERDE: PCMCIA S0 I/O space. DCD 0x9A500000, 0xE0000000, 1 ; MAINSTONEII: Zero- bank (in reserved slot - no physical memory required). DCD 0x9A600000, 0x14000000, 1 ; MAINSTONEII: nCS5: eXpansion board header. DCD 0x9A700000, 0x10000000, 1 ; MAINSTONEII: nCS4: SMSC 91C111 Ethernet controller. DCD 0x9A800000, 0x0A000000, 1 ; MAINSTONEII: nCS2 (upper half): 2MB SRAM. DCD 0x9A900000, 0x08000000, 1 ; MAINSTONEII: nCS2 (lower half): Board registers (FPGA). DCD 0x9AA00000, 0x04000000, 32 ; MAINSTONEII: nCS1: Secondary flash (32MB). DCD 0x9CA00000, 0x00000000, 32 ; MAINSTONEII: nCS0: Boot Flash (32MB). DCD 0x9EA00000, 0x50000000, 1 ; BULVERDE: Camera peripheral interface. DCD 0x00000000, 0x00000000, 0 ; end of table Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103820
  - 11
    - CalibrationData - when to restore from file on cold boot Where in the os is the registry values of calibrationData read for the touch screen? I am unable to find this. I currently save the values from the registry to a file and upon a cold boot I want to restore the values to the registry - but when or were do I need to do this at? I've tried in DdsiTouchPanelEnable but it appears this is too late (my touchscreen was not calibrated - the values were copied into the registry -I looked with remote registry editor Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103811
  - 12
    - EAP Session Hello, I'm having an issue with an aggressive EAP-TLS Radius server implementation in that the timeout is set to 1 second with no retries. So, the very first EAP request/Identity has an ID set to 1 and every second another request is sent by the AP with ID+1. My problem is, my netui username dialog is brought up because the state machine doesn't yet have a username and there's no way of clicking OK before the next request is sent and therefore I'm always behind. I don't have access to the 5.0 EAP source (as I believe it's part of the premier source) but the 4.2 has code with the following comments in eapfsm.c: #if 0 ... #else // // There appear to be a lot of bad implementations out there that increment // the ID field on retransmissions of Request/Identity packets, in violation // of the EAP specification (RFC2284): // "The Identifier field MUST be the same if a request packet is // retransmitted due to a timeout while waiting for a response." // // So, we force our response packet to use the most recently received request id, // which works around these misbehaving implementations. // ... #endif I don't want to post any code because I'm not sure of the licensing issues. As you can see this is exactly what I'm interested in. Can someone please point me to maybe a registry setting, workaround, QFE I'm unaware of? I'm going to start the red tape process of purchasing the source but was wondering if someone has ran into this. As per the AP config â?? this is a clients infrastructure that we have 0 control over so changing the timeouts and retries is not an option. Thanks for your help, Chris -- Chris Kavanagh Software Developer LibreStream Technologies Inc. www.LibreStream.com Unit 200 - 55 Rothwell Rd. Winnipeg, Manitoba Canada R3P 2M5 Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103808
  - 13
    - FATFS not mounting Hi All, I need some help from all the gurus of windows ce. I am developing a host controller driver for SDCARD in ARM platform(Windows CE6). The driver and the client driver gets loaded and I am able to see the same in the Storage manager control panel applet. I can also get the size and other details(as per debug messages). I have tried all possible combinations with the registry settings. Problem: The problem is, I could not get the file system mounted. and I am not able to see the "Storage Card" folder in MyDevice folder. Am I missing anything!!!!!!!!!!! Any help is greatly appreciated. Regards, Sudheer Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103803
  - 14
    - eboot I have been searching without much help, I am looking to add an ethernet card to the eboot list of cards, and re-build eboot ?I have cards that are close to cards that are listed but not completely the same yet have the same Ethernet chip (i.e. vendor id or product id dont quite match) which file do I modify to change or add a different product id and how do I build eboot.bin ? Thanks, Joe W. Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103799
  - 15
    - Bluetooth SDP Record for OBEX Basic Printing Profile (BPP) Hi All, I am working on Bluetooth Basic printing profile(BPP) on Windows CE 5.0. I had written an Obex Server for handling BPP reference object (Bppserver.dll) requests from Printer similar to the Obexinbx.dll and Obexfile.dll. It was supposed to be loaded when printer requests for the referenced objects. I have to register it in Servers.reg in the way similar to obexfile.dll is registered. For that i need the Bluetooth SDP Record for BPP. This is how it is registered for Obexfile.dll: ; @CESYSGEN IF SERVERS_MODULES_OBEXFILE [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Obex\Services\ {f9ec7bc4-953c-11d2-984e-525400dc9e09}] "BaseDir"="\\temp\\ftp" "Server"="obexfile.dll" "CanWrite"=dword:1 "Authenticate"=dword:0 "TransportAuthenticate"=dword:1 ; @CESYSGEN IF CE_MODULES_BTD "BluetoothSdpRecord"=hex: 35,41,09,00,01,35,03,19,11,06,09,00,04,35,11,35,\ 03,19,01,00,35,05,19,00,03,08,0a, 35,03,19,00,08,\ 09,00,06,35,09,09,65,6e,09,00,6a, 09,01,00,09,00,\ 09,35,08,35,06,19,11,06,09,01,00,09,01,00,25,03,\ 46,54,50 ; @CESYSGEN ENDIF CE_MODULES_BTD ; @CESYSGEN ENDIF SERVERS_MODULES_OBEXFILE Can any one provide me with the SDP record for Basic Printing Profile(BPP) with the Class UUID as {00001120-0000-1000-8000-00805F9B34FB}. Thanks in Advance, ~ Rajesh Reddy Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103789
  - 16
    - how to run app verifier on device hi, i have connected motorola verzone device through active sync to my pc. and when i am trying to run appverifier in the device, its giving me error " couid not enable shim engine on device. i have added all the dll's and .exe required. do i have to change any settings for it? Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103782
  - 17
    - how to add Common drivers to platform hi all, how can i build the driver in PUBLIC\COMMON\Drivers folder..for example.. the one in PUBLIC\COMMON\OAK \DRIVERS\BLOCK\MSFLASHFMD\STRATA folder... i am using maistone ii and how can i add stratad.dll to my platform image.. Can u tell me procedures.. What are the normal procedure for adding the drivers in to platform..I follwed the steps in the platform builder help and "Add driver to existing bsp".But it is not building properly. Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103781
  - 18
    - cold boot update registry touch calibration values wince 5.0 Where in the os is the registry values of calibrationData read for the touch screen? I am unable to find this. I currently save the values from the registry to a file and upon a cold boot I want to restore the values to the registry - but when or were do I need to do this at? I've tried in DdsiTouchPanelEnable but it appears this is too late (my touchscreen was not calibrated - the values were copied into the registry -I looked with remote registry editor Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103780
  - 19
    - Flash driver for wince 5.0 Hi, I am going to design flash driver of 128MB size for a handset. So I need to persist my data in the flash every time it's updated. My doubt is, Whether I have to use HIVE BASED REGISTRY or RAM based registry? The hive-based registry is most efficient on target devices that cold boot often but rarely or never warm boot.(this info is from platform builder). I think as a handset, it will need considerable number of warm boot also. So can you suggest a suitable registry type? My second doubt is selecting the internal file system. The available file systems are ROM only file system and RAM and ROM file system. It is mentioned in Platform builder that, the RAM and ROM file system is most useful in target devices that continuously power RAM because the object store is lost when RAM is not refreshed, and in the case of ROM only file system, it does not allow applications to place files in the object store. So can anybody suggest a suitable internal file system among this? Thanks in advance. Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103779
  - 20
    - USB Serial KITL (WinCE 6) - can it be done? I posted this in the microsoft.public.windowsce.embedded group, but have had no response. I thought I'd give it a try here: I've got USB Serial downloads on my platform (350 KB/sec -- much better than the 11 KB/sec of a UART). Now I'd like to get KITL working over that transport. I can select that option (USB) for Transport in Target/Connectivity Options, but I'm having a bit of difficulty getting it to work. Before I continue down this road, can anyone tell me: 1) Is KITL supported over USB Serial (not USB RNDIS, which I know will work)? 2) Is there a sample implementation of KITL over USB Serial I could look at? More detail: EBOOT can use the USB transport to download its image (selecting USB for Download in Target/Connectivity Options works just fine). When I try to use USB for KITL, I get no traffic on the USB ports after enumeration has completed. So, a few more questions: 3) What is VS2005 expect when you select USB for KITL Transport? 4) What does VS2005 need to see in order to "speak KITL" over this USB pipe? 5) Is there ANY documentation on USB (NOT RNDIS) KITL? Can anyone help? Has anyone from Microsoft tried this? Thanks! -- Steve G. Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103777
  - 21
    - Platform 5.0 Bug with Building SDK We are experiencing the following Microsoft Bug in Platform Builder 5.0: "BUG: You may receive an error message when you try to build the SDK after you successfully build a Windows CE 5.0 run-time image in Platform Builder 5.0" http://support.microsoft.com/kb/906459 Note: I installed all of the QFE's to date prior to any of our build attempts. I followed the bug workaround procedure and found that there aren't any Sysgen variables that are found in Anchored.txt file that are not found in the SysgenSettings.out file. The only difference is that some of the Sysgen variables are in lowercase even though they are the same variables. Does case matter, if so, what do we edit to have uniform case? We have successfully built all configurations of the operating system multiple times, however, when we attempt to build the SDK we always get the errors reported as a known Microsoft bug. Are there any other methods or procedures to bypass or solve the Microsoft Bug with regards to building an SDK in Platform 5.0? Is there another fix for this bug? Thanks. Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103776
  - 22
    - Incorporating a 3rd party driver into a BSP/Image I have a .CAB file which installs a WiFi card driver onto the CE device I'm developing. I've been able to extract out all the binary files, and the registry changes necessary to get the driver up and running, but I've run into a problem. I don't know how to incorporate a binary-only driver into a BSP (especially not one with several components which installs itself across subdirectories in the \Windows folder) Even worse, the word from higher-ups says I have to get rid of the CAB support since it is taking up too much space, so I have to incorporate this driver into my image at least, even if it is impossible to make it part of the BSP. Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103766
  - 23
    - data file compression I'm developing a project which needs to store compressed files for uploading to a central server. Some of these files can get pretty large (video), so I will need compression on my CE device. Additionally, the device must be configured to receive compressed files for updating (also very large). What types of file or folder compression/decompression will run on a CE environment? I will most likely need a dll, since this project will be essentially headless. Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103765
  - 24
    - Serial communication on USB 2.0 losing characters when using WaitCommEvent Hello! I'm adapting a USB 2.0 driver to work with a PXA270. When using this driver as a serial driver (usbfndrv.cpp and mdd.c) together with WaitCommEvent, I'm losing 1 character for each 2048 charter. It's working fine when WaitCommEvent is not used. It's also working OK with the internal USB device on PXA27. The reason is that the page size is 64 byte on the internal USB device, but 512 on USB 2.0 device. And the FIFO in mdd is 2048 byte. The character is tossed in the SerialEventHandler in mdd.c. Is there someone who has worked out this problem earlier? Regards Amund Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103750
  - 25
    - FILESYS: Waiting for bootable file system to be mounted. Hi All, I am playing with wince60 device simulator, i select "Binary Rom Image File System" as my filesystem and ROM-only File System, however, when reboot, I got "FILESYS: Waiting for bootable file system to be mounted." many many times. How can i do? Thanks Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103746
- Next
  - 1
    - how can I play hive-registry on WINCE6.0 device simulator? Hi ALL, Can you tell me whether or not I can play hive registry on WINCE60 divice simulator? If can, can you tell me how? Thanks a lot max Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103745
  - 2
    - kill build task Hi ALL, i am calling my application through makefile during build command(build -c) in WINCE . So is there any way to stop the build through my perl application? Build ->makefile->perlapps .So i want to come out from the build process after my application finished the work . Any input is welcome Thanks Chinmoy Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103741
  - 3
    - WINCE Hangs PXA270, PB5.0 Our product will reside in a truck. For longer duration testing, I left the system running and at some point of time it hangs. I'm not able to findout where it hangs. The same system in the test bench works fine for days. How do I findout why the WINCE hangs and where ? I wont be able to capture debug output continuosly as I cannot keep a laptop connected always. Is there any log I can take ? Any advice would be really helpful to me Thanks, Venkatesh Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103739
  - 4
    - EAP-TLS with windows CE Hi, I was wondering how EAP-TLS authentication is performed with windows ce 5.0. I have loaded the necessary private key and certificates (they work with other devices such as laptops) onto my device and they appear to be going to the correct stores. When I go to connect to an EAP-TLS enabled network, I get a prompt for a User Name and Domain Name. What exactly is it looking for here? The Active Directory user name that the certificate was issued to? Or the subject name as on the certificate? After entering the user name and the domain, the username dialog goes away but then authentication fails and it reappears. What are possible causes of this authentication failure? Also, is there a good description somewhere out there about how EAP-TLS works with Windows CE5.0? I'd really like to be able to troubleshoot these types of problems... Thanks, Jon Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103734
  - 5
    - OEMIoControl: Unsupported Code Hi, Can anyone give me some clues on how understand and trace these errors... X86Init done, OEMAddressTable = 80229be8. OEMIoControl: Unsupported Code 0x101008c - device 0x0101 func 35 OEMIoControl: Unsupported Code 0x10100cc - device 0x0101 func 51 OEMIoControl: Unsupported Code 0x10100d0 - device 0x0101 func 52 OEMIoControl: Unsupported Code 0x10100f8 - device 0x0101 func 62 OEMIoControl: Unsupported Code 0x1010024 - device 0x0101 func 9 OEMIoControl: Unsupported Code 0x1010024 - device 0x0101 func 9 OEMIoControl: Unsupported Code 0x1010024 - device 0x0101 func 9 OEMIoControl: Unsupported Code 0x1010024 - device 0x0101 func 9 OEMIoControl: Unsupported Code 0x1010024 - device 0x0101 func 9 OEMIoControl: Unsupported Code 0x1010024 - device 0x0101 func 9 OEMIoControl: Unsupported Code 0x1010024 - device 0x0101 func 9 OEMIoControl: Unsupported Code 0x1010024 - device 0x0101 func 9 OEMIoControl: Unsupported Code 0x1010024 - device 0x0101 func 9 OEMIoControl: Unsupported Code 0x1010024 - device 0x0101 func 9 Thanks, Joe W. Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103728
  - 6
    - pm.dll / RequestPowerNotifications Hi, I have a WINCE5.0 image with full power mngmnt. An application needs to be notified of a user pressing the power button. I call RequestPowerNotifications() for this, with correct parameters. I get Error 1060 : The specified service does not exist as an installed service. After this I noticed that pm.dll does not seem to be loaded. Can this be the cause ? I cannot find ANY regfile in the entire CE source-tree that references PM.dll How is this dll supposed to be loaded ? there is a lot of docu on powermanagement, but the docu assumes it works :-( and doesn't mention any settings. Any tips are welcome... Greetings, Rob. Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103721
  - 7
    - how to call CPP functions from a C files? I see some ms code do it, but i don't see any special calling conversion define in source or in make files? Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103716
  - 8
    - Help about COM Thread Models! In my opion the STA COM server only run in one thread and the data is thread-safety , To verify my opions, I did one test. But from my test result, the two opions are not verified.I can't know what problem in this. Any help would be really appreciated! The follow is to my step to do test, include key code-section and result content: The COM Server is only to print the caller's parameter and its threadid, the code is posted follow: -------------------------------------------------- STDMETHODIMP CHello::LogTrace(SHORT Caller, SHORT Inc, DWORD Client) { FILE* fp; //szPrint is one member of CHello, it used to check whether the COM server data is thread-safety. sprintf(szPrint, "C = %d, Inc = %d, Serv = %x, Client = %x", Caller, Inc, GetCurrentThreadId(), Client); Sleep(1); fp = fopen("Test.txt", "a+"); fprintf(fp, "%s\n", szPrint); fclose(fp); return S_OK; } -------------------------------------------------- The COM Client have three steps: 1.The main thread create a server thread which build STA thread, the code is : -------------------------------------------------- DWORD WINAPI ServPorc(LPVOID lpv) { pDlgParam pParam; DWORD dwInterface; bool bContinue = true; IHello* pHello = NULL; pParam = (pDlgParam )lpv; CoInitializeEx(NULL, COINIT_APARTMENTTHREADED); CoCreateInstance(CLSID_StdGlobalInterfaceTable, NULL, CLSCTX_INPROC_SERVER, IID_IGlobalInterfaceTable, (void **)&gpGIT); CoCreateInstance(CLSID_Hello, NULL, CLSCTX_INPROC_SERVER, IID_IHello, (void **)(&pHello)); pHello->LogTrace( -1, -1, GetCurrentThreadId()); gpGIT->RegisterInterfaceInGlobal(pHello, IID_IHello, &dwInterface); PostMessage(pParam->hDlg, WM_USER + 2, 0, (LPARAM)dwInterface); MSG msg; while(GetMessage(&msg, NULL, 0, 0)) { DispatchMessage(&msg); } if (pHello) pHello->Release(); CoUninitialize(); return 0; } -------------------------------------------------- 2.After setup COM server thread, the main thread create some COM client threads. -------------------------------------------------- for (int i= 0; i< PARAL_THREAD; i++) { LogParam[i].ICookie = dwCookie; LogParam[i].Child = i; hTestServer[i] = CreateThread(NULL, 0, LogPorc, &LogParam[i], NULL, &dwTestHandle[i]); } -------------------------------------------------- 3.The child thread call the pHello->LogTrace. DWORD WINAPI LogPorc(LPVOID lpv) { pLogChild pParam; IHello* pHello = NULL; HRESULT hr; pParam = (pLogChild) lpv; gpGIT->GetInterfaceFromGlobal(pParam->ICookie, IID_IHello, reinterpret_cast< void** >( &pHello )); for (int i = 0; i < 20; i++) { pHello->LogTrace(pParam->Child, i, GetCurrentThreadId()); Sleep(1); } pHello->Release(); return 0; } The section of test.txt file is : .... C = 0, Inc = 0, Serv = 61b000e, Client = 61b000e C = 0, Inc = 1, Serv = 61b000e, Client = 61b000e C = 2, Inc = 0, Serv = 620000e, Client = 620000e C = 1, Inc = 1, Serv = 61e000e, Client = 61e000e C = 0, Inc = 2, Serv = 61b000e, Client = 61b000e C = 2, Inc = 1, Serv = 620000e, Client = 620000e C = 1, Inc = 2, Serv = 61e000e, Client = 61e000e C = 1, Inc = 2, Serv = 61e000e, Client = 61e000e C = 0, Inc = 3, Serv = 61b000e, Client = 61b000e C = 2, Inc = 2, Serv = 620000e, Client = 620000e C = 1, Inc = 3, Serv = 61e000e, Client = 61e000e C = 1, Inc = 3, Serv = 61e000e, Client = 61e000e C = 1, Inc = 3, Serv = 61e000e, Client = 61e000e .... The serv fields have three threadids, and these have some repeated lines. Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103715
  - 9
    - Wave Driver registry settings Hi, I am trying to build a wave driver based on the Unified Audio model. For this I created a normal stream interface driver with all WAV_xxx functions required. The registry entry for the driver was done under HKEY_LOCAL_MACHINE\Drivers\Builtin\FILTER When I try to call the wave api "waveOutGetNumDevs" the 0 is returned. Also the waveOutOpen return "NO DRIVER" found. What i fail to understand is that how do the wave api know which are the audio drivers available. Under what registry settings should the audio driver be put? Thanks in advance Mohammed Anwar Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103714
  - 10
    - FATFS CacheSize - is it "overridden" by profiles, or ... ? Hello all, How does the CacheSize setting for FATFS interract between the base setting and the profiles? You can set the cache size for FATFS by setting the registry value [HKEY_LOCAL_MACHINE\System\StorageManager\FATFS] "CacheSize"=dword:1000 like the other FATFS parameters, you can supposedly override this with a value under the profile, e.g. [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\ramd\FATFS] "CacheSize"=dword:1000 But what does override mean here? Does it mean that FATFS allocates a separate cache of that size for the profile (ramd here), in addition to it's base cache? Does it use the larger or smaller of all the profiles for a single cache? Or is the base setting really just a default, and every mounted FAT filesystem gets a separate cache that big? Thanks Aaron Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103712
  - 11
    - Problem building debug version of a driver (LNK4204) Hi! Trying to build a debug version of a driver under eVC gives the warning "LNK4204: 'ccrthelp.pdb' is missing debugging information for referencing module; linking object as if no debug info". The driver DLL is build, but during a debug session the debugger jumps raher randomly through the source code. The PDB in question is from a Platform Builder directory (\PUBLIC\COMMON\OAK\LIB\ARMV4I\DEBUG). Any suggestions? Regards Max Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103709
  - 12
    - CE5 ASP - strange error message on Response.Flush Hello all, Is John Spaith out there ? :) In one of my ASP pages, I'm trying to use Response.Flush. Elsewhere, it has seemed to work OK, but here my script just stops with this message: ------------------------------ Buffering must be turned on to complete that action ASP scripting compilation error: '80020009' Description: In file: /Journal.asp On line: 54 ------------------------------ Even this simple test case now fails: <%@ language="VBScript" %> <% Response.Write "cake<br>" Response.Flush %> Any ideas? Regards Aaron Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103708
  - 13
    - NAND flash fmd dirver performance Dear all, I'm developing nand flash fmd driver using FAL library. I printf the 'dwNumSectors' parameter in function FMD_ReadSector(...) and find it is still 1 . So, FAL only read 1 sector one time? and if so, the performace is not good, any one can give me some idea? thanks. Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103707
  - 14
    - Unidentifed USB Device I have a HID-compliant USB device and I have written a custom driver for it. (And removed usbhid (SYSGEN_USB_HID) from the catalog for testing purposes). The driver is loaded correctly if I plug the device in AFTER startup. But ... if the device is already plugged in at startup, I get the Unidentifed USB Device dialog. If I cancel the dialog, unplug the device and plug it back in, the driver loads OK. Or if I just enter the driver name in the dialog, it loads OK. (With SYSGEN_USB_HID included, it is recognized at startup by the default HID settings). I have tried adding all sorts of registry entries under USB\LoadClients and other keys, using Vendor ID, VendorID_ProductID, Default or whatever, without success. What is different about the bootup procedure from that when I plug the device in? Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103700
  - 15
    - DLL test tool Hi ALL , I am trying to make a tool which will test the all DLL and EXEs are present are not in the platfrom target tree. So i am caling my perl application tool through makefile from my own created directory in platfrom tree with modify the dirs file and this test tools is checking all DLLS and EXEs.I am comparing with my platfrom.bib file and if i not found any DLL or my required EXE which will be used in my makeimg ,so soon i want come out from build .SO i dont know how to stop the microsoft build program through perl script and program should terminate gracefully also? Any ideas are welcome to open my locked door. Thanks Chinmoy Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103699
  - 16
    - Subtle bug in MIPS assembler - missing definition ignored Here is a potentially nasty behavior in at least the Windows CE MIPS assembler. It may be present on other as architectures as well. The following code is compilable: #include <kxmips.h> #define PATRICK_STARFISH 0x12340000 LEAF_ENTRY(this_is_bogus) lw t0, SPONGEBOB_SQUAREPANTS(PATRICK_STARFISH) ... even though there is _no_ definition for SPONGEBOB_SQUAREPANTS! The assembled code generated reads: Proc: this_is_bogus lw t0, SPONGEBOB_SQUAREPANTS(PATRICK_STARFISH) 0000000000 0x3c011234 lui at,0x1234 0x00000004 0x24210000 addiu at,at,0 0x00000008 0x8c280000 lw t0,0(at) ... in other words, SOMETHING(defined_symbol) is evaluated as if SOMETHING had an empty definition (as opposed to being undefined). The assembler correctly handles the case where the macro includes a literal instead of a symbol. Building the code: lw t0, SPONGEBOB_SQUAREPANTS(0x12340000) fails, with an error: unresolved external symbol SPONGEBOB_SQUAREPANTS referenced in function this_is_bogus -- --Richard R Lee, eMVP Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103698
  - 17
    - paired/unpaired Flash components and FMD Hi, I am facing a problem with the FMD located in: WINCE500\PUBLIC\COMMON\OAK\DRIVERS\BLOCK\MSFLASHFMD\FASL After creating my local copy of it, I got it working in one of our devices using NOR Flash (Spansion) with 2 paired chips. Also my Booloader is using the PQOAL flash library. I used it to flash the NK.bin and it works fine. Now I am using a non-paired architecture (only one 16-bit Flash chip). I thought that setting the bPairedFlash variable to FALSE should be enough, but it is not working, while the bootloader still works without problems. After some debugging, I found that the driver fails in the following line: pStorageDesc->pFlashDevDesc->stDeviceID.u32MfgID = RD_FLASH_REG (lpvBaseVirtualAddr, CYCLE_4_ADDR_MFG_ID) ; That is, it cannnot get a correct manufacturer ID. As the Flash manufacturer is the same for both devices and the bootloader is working, I am thinking that some is wrong with the WR_FLASH_REG/ RD_FLASH_REG macros in the driver for unpaired chips (or that I'm getting some alignment problems with the virtual address mapping [MmMapIoSpace]). Has anybody find the same situation? Thanks for your feedback, Alex Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103690
  - 18
    - How to disable ActiveSync from monitoring serial lines? I have a strange situation. I have a PXA255 dev board and I use the processors USB client for ActiveSync. I also have a serial modem port that I use for remote communication. When I click the Modem off, I get a brief "USB status" connect system status screen that pops up. At first I thought the USB +D line must be glitching and briefly triggering a USB "attach". I eliminated this as a posibility by disabling the "USB Client" subsystem on the Xscale chip. and via hardware. I narrowed it down to the "CD" (carrier detct) signal glitching which must result in CE poping up the status screen as it must not discern a USB vs a serial port ActiveSync attach. This screen is very annoying and I can not ship product with this. I could totally remove the ActiveSync component but I don't want to give up the functionality. Is there a way to prevent ActiveSync from monitoring the serial ports (and just monitor the USB client connection)? I believe you can do this on the desktop side of ActiveSync, is this available in CE somehow?. Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103687
  - 19
    - cloning driver Dear all, I wanted to clone USB driver, i am getting the following error BUILD: [01:0000000467:ERRORE] LINK : fatal error LNK1104: cannot open file 'E:\WINCE500\PBWorkspaces\XXXXX\WINCE500\XXXXX\oak\lib\x86\retail\hcdlib.lib' What settings as to be changed to rectify this error? Below is the sources file TARGETTYPE=LIBRARY TARGETNAME=hcdlib CONDITIONAL_INCLUDES=macwin32.h SOURCELIBS= \ $(_TARGETPLATROOT)\lib\hcdlib.lib \ TARGETLIBS= \ $(_TARGETPLATROOT)\lib\hcdlib.lib \ SOURCES= \ cphysmem.cpp \ sync.cpp \ cdevice.cpp \ hcd.cpp \ hcddrv.cpp \ Regards, Sankarraj Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103685
  - 20
    - keyword __interface in PB30 Hello, I need to compile a project in Platform Builder (3.0). The PB30 online help says, that the keyword __interface is supported but the keyword interface needs a 'pragma keyword("interface", on)'. But compiling this code in a .CPP file gets an error: #include <windows.h> __interface foo { void bar() = 0; }; error C2146: syntax error : missing ';' before identifier 'foo' The same occures when I use 'interface' instead of '__interface'. Is there any command line argument that enables the support of __interface, or do I really need the ugly for with the virtual keyword at each methdod? class foo { virtual void bar() = 0; }; /Helge -- Time is an ocean but it ends at the shore Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103680
  - 21
    - IR Hi, I am working on FIR driver for Windows mobile. When I run the IRPort tests I am getting a debug message "SKIPPED: Unable to establish connection to IRTestServer" AND ALL THE TEST CASES WHICH REQUIRE CONNECTION TO IRServer are getting skipped. This is happening eventhough I am using another board to run irapisrvxx. One more thing is when I try to stop obexsrv it is not happening and I get a message that unable to stop obexsrv. If anybody has faced this issue and know why this is happening, Please help me. Regards, Raman Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103676
  - 22
    - Filesystem filter ENCFILT fail load Hi all, I'm testing the ENCFILT sample on Windows Mobile 6 Emulator. I change the name to myfilter.dll. I build it in PB and deploy on WM6 Emulator added filesystem filter registry for Storage Card. When I try to attac the storage card (by setting storage location in emulator), followin message shown in debug console: CertVerify: myfilter.dll trust = 2 I can't see other functions of the filter being called when I try t access the storage card, even DllMain (I added debug msg in DllMain). I tried the same things with fsdspy.dll and everything works find (ca see the DllMain function called) so I think it's shouldn't be registr problem. Do I missed something with the ENCFILT sample? Thanks a lot!!! Just Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103674
  - 23
    - How to load bluetooth driver manually ? Dear all: I want to active my bluetooth driver manually when I need it, other time I will shutdown it. how to do it? Loaded symbols for 'D:\WINCE500\PBWORKSPACES\S1\RELDIR\STORM_ARMV4I_RELEASE\AFD.DLL' Loaded symbols for 'D:\WINCE500\PBWORKSPACES\S1\RELDIR\STORM_ARMV4I_RELEASE\PPP.DLL' Loaded symbols for 'D:\WINCE500\PBWORKSPACES\S1\RELDIR\STORM_ARMV4I_RELEASE\TCPSTK.DLL' Loaded symbols for 'D:\WINCE500\PBWORKSPACES\S1\RELDIR\STORM_ARMV4I_RELEASE\DHCP.DLL' Loaded symbols for 'D:\WINCE500\PBWORKSPACES\S1\RELDIR\STORM_ARMV4I_RELEASE\NETBIOS.DLL' Loaded symbols for 'D:\WINCE500\PBWORKSPACES\S1\RELDIR\STORM_ARMV4I_RELEASE\WS2.DLL' Loaded symbols for 'D:\WINCE500\PBWORKSPACES\S1\RELDIR\STORM_ARMV4I_RELEASE\IPHLPAPI.DLL' Loaded symbols for 'D:\WINCE500\PBWORKSPACES\S1\RELDIR\STORM_ARMV4I_RELEASE\WINSOCK.DLL' Loaded symbols for 'D:\WINCE500\PBWORKSPACES\S1\RELDIR\STORM_ARMV4I_RELEASE\AUTORAS.DLL' Loaded symbols for 'D:\WINCE500\PBWORKSPACES\S1\RELDIR\STORM_ARMV4I_RELEASE\IRDASTK.DLL' Loaded symbols for 'D:\WINCE500\PBWORKSPACES\S1\RELDIR\STORM_ARMV4I_RELEASE\BTHUNIV.DLL' ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Loaded symbols for 'D:\WINCE500\PBWORKSPACES\S1\RELDIR\STORM_ARMV4I_RELEASE\BTD.DLL' ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Loaded symbols for 'D:\WINCE500\PBWORKSPACES\S1\RELDIR\STORM_ARMV4I_RELEASE\BTHBCSP.DLL' ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~` Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103670
  - 24
    - wehre is performance monitor in VS.NET 2005 Hi, I have isntalled VS.NET 2005 and Microsfot Remote Tools Framework 1.0. I am looking for a tool I used in WinCE 5.0 and it is called "Performance Monitor" but it seems does not shipped with VS.NET. I only have: registry editor, file viewer, process viwer, and so on... and all of them work perfect using Remote tools framework 1.0, Activesync connection works OK and remote tol is launched OK in my WinCE 6.0 device... but... I want to use remote tool... does anybody how can I get that tool and use it with "Remote Tools Framework 1.0" Thanks advanced. Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103662
  - 25
    - Re: whether license dialog box show while using Windows CE 5.0. I have done some test by changing the date , Nothing happened! "tony" wrote :... > We use evaluation PB5 ,and we have deployed the runtime OS image on my > device. Of course we have bought the runtime license for every device. > My question is whether any license dialog box will show while customers > using the device. > Thanks for any answer! > Tag: RAMDISK block driver working in WinCE 6.0 Tag: 103661

Does Anybody able to make RAMDISK block driver working in WinCE 6.0.

Could you please tell me how you have done that.

Re: RAMDISK block driver working in WinCE 6.0 by Valter

Valter
Mon Aug 20 07:16:10 CDT 2007

=?Utf-8?B?VGFsaWI=?= <Talib@discussions.microsoft.com> wrote in
news:2CE5DCE0-796B-478E-AE5F-BE5F123B9EA5@microsoft.com:

> Does Anybody able to make RAMDISK block driver working in WinCE 6.0.
> Could you please tell me how you have done that.

You mean the one under:
\WINCE600\PUBLIC\COMMON\OAK\DRIVERS\BLOCK\RAMDISK
or another RAMDISK driver based on different versions of the OS?
If you are using the sample RAMDISK driver provided with CE 6.0, post
a description of it's wrong behaviour and a bump of the error messages
that it generates on a debug version of the OS.

--
Valter Minute
(the reply address of this message is invalid)
(l'indirizzo di reply di questo messaggio non è valido)

Top