Queries about complier

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - SD host spec & Compliance [Win CE 5.0] [MIPSII] Question:- Our CPU has SD 1.0.1 spec compliant hardware. 1. Is it possible to update our drivers to support SDHC without needing HW change ? 2. With SD 1.0.1 host (HW compliance) , can SD host driver can be upgraded to support bigger SD cards of size (4GB etc., ) ?? FAT 16 --> FAT32 will do the trick ? 3. SDHC support required SD 2.0 compliant Hardware (mandatory) ? Is there any way to work around using old SD 1.0.1 hardware and support SDHC ? (atleast detect) ? Thanks, Siddarth Tag: Queries about complier Tag: 115001
  - 2
    - A question from new user? I developed a SD card. My develop board is based on xscale. I want to directly access registers in SD host controller for debugging SD card and send the content to PC by using Serial port. How to do it? Thanks, I downloaded WinCE 5.0 platform builder. I can send information by using API, but I don't know how to access registers in SD host. It seems WinCE provide API to access SD as a disk only, so I can not access any register defined in xScale. Do I have to develop a device driver? Is there any easy way to do this simple job? Thanks, Tag: Queries about complier Tag: 115000
  - 3
    - About customizing OS Chinese Language Hi ,all I chose the "Chinese(China)" in locales catalog ,and chose "Chinese" in default locale. I built the os and downloaded it to the target.I found messy code for Chinese. How can I resolve it. Thanks a lot Tag: Queries about complier Tag: 114993
  - 4
    - PB5.0: Difficulty cloning USB function client driver (ufnmdd.dll) Hello all, I am trying to clone the MDD code from the USB function client driver in PUBLIC\COMMON to add a few things to pipe.cpp, and the various instructions of Steve Maillet, Bruce Eitman, etc. published on the web don't seem to map very well to this case. I've copied the contents of C:\WINCE500\PUBLIC\COMMON\OAK\DRIVERS\USBFN\CONTROLLER\MDD to my platform, modified SOURCES appropriately to write output to the platform, and verified that UFNMDDBASE.LIB is built in the expected PLATFORM\FOO\LIB\ARMV4I\RETAIL directory. Problem is, the instructions to clone a driver seem to assume that all the ingredients are contained in a folder which can be copied to the platform so that sysgen_capture can be run. That isn't the case here; the product UFNMDDBASE.LIB appears to be linked into UFNMDD.DLL by the following block in the big cesysgen makefile at PUBLIC\COMMON\CESYSGEN\MAKEFILE: ufnmdd:: ufnmddbase ceosutil defbuslib @set TARGETNAME=$@ @set RELEASETYPE=OAK @set SOURCELIBS=$(SG_OUTPUT_OAKLIB)\ufnmddbase.lib $(SG_OUTPUT_SDKLIB)\ceosutil.lib $(SG_OUTPUT_OAKLIB)\defbuslib.lib @set TARGETTYPE=LIBRARY $(MAKECMD) /NOLOGO $(SG_OUTPUT_OAKLIB)\$@.lib I am a little leery of the prospect of cloning this monster, or worse the entire public\common trunk! But I am at an impasse here, and modifying public\common code is looking like the only feasible way to modify this stuff. Can anyone advise how to proceed before I "back it up and hack it up"? Best regards, Craig Blome Tag: Queries about complier Tag: 114988
  - 5
    - Windows Mobile Compilation..... hi! I am having a WinCE platform builder 5.0 and got the CE image for my development platform.(Pxa270 arm based processor) I compiled my driver using debug build environment. Everything works fine in my development platform. but when i try to install the same Cab file in "Windows mobile 5.0 arm based processor..Omap2420" based PDA. I am getting error as the installation file is not intended for that device. Any one can advice me about this. How do i compile my driver for Windows Mobile 5.0 using wince 5.0 platform builder. Do i need to get some other build environment for windows mobile 5.0 omap based processor which is again arm based processor???? Your help is highy appreciated. Thanks. Tag: Queries about complier Tag: 114980
  - 6
    - Boot problem Windows CE 6.0 Hi, I'm trying to bring up a Windows CE 6.0 image. To do this I have a 4 GB compact flash, with a 256 mb primairy partition. I copied all the bootdisk files and nk.bin to the compact flash. When I start the computer it shows the dos startup menu. If I select load local nk.bin, it starts loading a lot of files and then it hangs on a jumping to (hex-value).. If I disable the KITL options it doesn't even give this announcement. If I try the eboot option and I can start the upload. But after a few seconds it goes wrong, the computer then resets and thats it. What am I doing wrong? Thanks in advance, Chris Tag: Queries about complier Tag: 114978
  - 7
    - Bootup Problem Hi, i am using 128MB RAM. it is working fine till OEMInit function after that it got stucked. The following Message is appearing o the serial: Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built Aug 20 2008 13:53:41 Microsoft Windows CE Bootloader for the Samsung SMDK2410 Version 2.5 Built Aug 2 0 2008 Press [ENTER] or [SPACE] to launch Boot Menu. Starting auto-download ... Initiating image download System ready! Preparing for download... Download file information ------------------------------------------------------------------------------- [0]: Address=0x80001000 Length=0x687F74 Name= ****** OEMVerifyMemory Checking Range [ 0x80001000 ==> 0x80688F73 ] ****** RAM address ****** rom_offset=0x0. ROMHDR at Address 80001044h AM29LV800_EraseFlash: Start Sector 0x12 ... AM29LV800_EraseFlash: Requested 0x20 bytes, Erasing 0x1 sectors (0x10000 bytes) (offset 0xf0000 bytes)... Erasing sector 18 Addr b50f0000 ! AM29LV800_WriteFlash: Writing 0x20 bytes to flash (offset 0xf0000 bytes)... INFO: OEMLaunch: Jumping to Physical Address 0x37007ABCh (Virtual Address 0x8000 7ABCh)... --Watchout - here we go on WinCE exec point...Windows CE Kernel for ARM (Thumb E nabled) Built on Jun 24 2004 at 18:25:00 ProcessorType=0920 Revision=0 sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 8000796c DCache: 8 sets, 64 ways, 32 line size, 16384 size ICache: 8 sets, 64 ways, 32 line size, 16384 size Test from WinCE After OALIntrInit After Timer init After KitlStart -- Software Developer Johari Digital Healthcare LTD. INDIA Tag: Queries about complier Tag: 114972
  - 8
    - free sex moves download free sex moves download http://kumaripud.blogspot.com/ Tag: Queries about complier Tag: 114970
  - 9
    - LCD Display Driver Problem Hi I am working on wince5.0(ARM).i am using 640x480 LCD. My LCD is working fine at boot time but as soon as display driver loads nothing will appear on the LCD(Black). -- Software Developer Johari Digital Healthcare LTD. INDIA Tag: Queries about complier Tag: 114967
  - 10
    - Rheap.cpp Debugchck: 1413 and DLL Heap I was wondering if there was the need to match up the code generation options from within Platform Builder like you have to do with Visual Studio 2005. I am running an ARM platform on Windows CE 6.0. I've updated all QFEs up until July 2008. I've recently noticed that while I am running our .Net CF 2.0 Application (under a debug build of Windows CE.) that we are getting the following debug check while the application is running (and platform builder is loading modules.) 227405 PID:4470002 TID:54d0002 Coredll: DEBUGCHK failed in file D: \yamafp-1\private\winceos\COREOS\core\lmem\.\rheap.cpp at line 1413 The comments aroudn the debug check itself basically mentions that it will fire the DEBUGCHK if the dll heap is not being used (it checks g_ModuleHeapInfo.nDllHeapModules) Normally under VS2005 you would use /MD or /MDd to specify whether to use the Multi-Threaded DLL or Multi-Threaded Debug DLL code generation options, as you can't really do conditional options under the SOURCES files I figured that this was not necessary. Am I missing something, doing something wrong, or is this not actually an issue? I would appreciate any comments, issues or insights that others may have into this. Thank you, Brad. Tag: Queries about complier Tag: 114965
  - 11
    - Making an application non-pageable Hi I was wondering if there is a way to tell the kernel to not page a specific application. I have read this article http://blogs.msdn.com/ce_base/archive/2008/01/19/Paging-and-the-Windows-CE-Paging-Pool.aspx And, it suggests a method for making all applications non-pageable or a method for making a section or sections of a specific application non-pageable. I have tried the first method, but I find that the system memory consumption is too high. The second method may be acceptable, but I would perfer to make the entire application non-pageable instead of doing this by sections. Is there a method for doing this? Thank you, Tom Tag: Queries about complier Tag: 114963
  - 12
    - doc on clock/ SetLocalTime date limits I'm using a custom build ver CE5.0. it doesn't matter if I use the MS build datetime GUI or my own program call to SetLocalTime(), there seems to be a limit on the date I can change(year only?). But I cannot find any documentation on it. it seems like year over 2099 and under 1980. If I enter a date outside this range, the date set fails and the clocks show some time in year 2046/2047. is this true, there is a limit and if so what is it. a pointer to the actual documentation would be nice. Thanks. Tag: Queries about complier Tag: 114957
  - 13
    - Porting from linux BSP to WinCE 6.0 BSP Hello, I am working on i.MX31 based Board with BSP from Freescale. Linux is working well on our board, everything works fine. So I tried to port WinCE 6.0 on our board. Now I have the following problem under Linux we added for the GPIOs the following definition: (mx31_pins.h) MX31_PIN_GPIO1_28 = _MXC_BUILD_GPIO_PIN(0, 28, 79, 0, 107, 0), and we changed (I now it is very dirty *g*) (mx31ads.c): static int __init _mxc_expio_init(void) { /* CHD: FIXME dirty hack used expio routine for ethernet IRQ! */ int i; initialized = 1; /* printk(KERN_INFO "MX31ADS EXPIO(CPLD) hardware\n");*/ printk("\n\nEnable Interrupt for Ethernet\n\n"); /* * Configure INT line as GPIO input */ //CHD changed GPIO1_4 to 1_28 for Ethernet IRQ mxc_request_iomux(MX31_PIN_GPIO1_28, OUTPUTCONFIG_GPIO, INPUTCONFIG_GPIO); mxc_set_gpio_direction(MX31_PIN_GPIO1_28, 1); set_irq_type(MXC_ETH_IRQ, IRQT_RISING); //set_irq_chained_handler(MXC_ETH_IRQ, mxc_expio_irq_handler); /* disable the interrupt and clear the status */ //__raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG); //__raw_writew(0xFFFF, PBC_INTSTATUS_REG); /*for (i = MXC_EXP_IO_BASE; i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES); i++) { set_irq_chip(i, &expio_irq_chip); set_irq_handler(i, do_level_IRQ); set_irq_flags(i, IRQF_VALID); } set_irq_type(EXPIO_PARENT_INT, IRQT_HIGH); set_irq_chained_handler(EXPIO_PARENT_INT, mxc_expio_irq_handler); */ return 0; } Now I need to know how to change this settings: MX31_PIN_GPIO1_28 = _MXC_BUILD_GPIO_PIN(0, 28, 79, 0, 107, 0), so that it is compatible with the definitions under WinCE 6.0: for example DDK_IOMUX_PIN_GPIO1_2 = (2536), DDK_IOMUX_PIN_GPIO1_1 = (2544), DDK_IOMUX_PIN_GPIO1_0 = (2552), I hope somebody could help me Thanks Tag: Queries about complier Tag: 114947
  - 14
    - Ask About BSP Hi guys, I'm working on Windows CE .net 4.2 Platform Builder. I have a BSP that support my board. I want to ask, can I use the BSP on Platform Builder 5.0? thanks a lot.... Tag: Queries about complier Tag: 114935
  - 15
    - CoFileTimeNow API call Return value on CE 5 I am completely new to the Windows CE / Platform builder. I am trying to test the API call CoFileTimeNow: http://msdn.microsoft.com/en-us/library/aa908568.aspx So far I have the following code in my Application project in my platform builder: #include "stdafx.h" int main (int argc, TCHAR *argv [], TCHAR* envp []) { HRESULT CoFileTimeNow( FILETIME* lpFileTime ); printf("finished running the program\n"); return 0; } The above program compiles and run fines (without any errors) on my target platform but I am not sure if it actually returned something from the CoFileTimeNow API call. How do I verify it? Can I do some printf statement to actually see the time value? Thanks Tag: Queries about complier Tag: 114931
  - 16
    - Win CE Update releases for the month of July 2008 As you may know, updates for Microsoft® Windows® CE are now available as a monthly rollup. The Microsoft® Windows® CE update rollup will be released the second Tuesday of every month, the latest release occurring on or around July 12th, 2008. The following updates for Windows CE have been recently released and are available for download. More information for each update is provided in the Readme document available after the individual update(s) has been installed. Windows CE 5.0 Update name: Windows CE 5.0 Platform Builder Monthly Update (July 2008) Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=FB405FD9-983C-4D3F-91EB-6B58CC504604&displaylang=en Description: This is a set of updates for Windows CE 5.0 Platform Builder released during the period of July 1 - July 31st, 2008. These Microsoft Windows CE 5.0 updates are fixes for Windows CE operating system problems you run into during the development and maintenance of your custom platform. Windows Embedded NavReady Update name: Windows Embedded NavReady Monthly Update (July 2008) Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=10479D0C-43D2-4E31-9BC1-D813A987F830&displaylang=en Description: This is a set of updates for Windows Embedded NavReady released during the period of July 1 - July 31st, 2008. These Microsoft Windows CE updates are fixes for Windows CE operating system problems you run into during the development and maintenance of your custom platform. Windows Embedded CE 6.0 Update name: Windows Embedded CE 6.0 Platform Builder Monthly Update (July 2008) Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=991A6EF3-7035-4D71-B424-1FB393AF8A26&displaylang=en Description: This is a set of updates for Windows Embedded CE 6.0 Platform Builder released during the period of July 1 - July 31st, 2008. These Microsoft Windows CE updates are fixes for Windows CE operating system problems you run into during the development and maintenance of your custom platform. Download Link - directs you to the Microsoft Download Center page associated with each update. Each update is contained in a self-extracting compressed file. Component - displays the module(s) updated in each update Description - provides more information on the issue(s) fixed **DO NOT REPLY - THIS E-MAIL IS BEING SENT TO YOU FROM AN UNMONITORED ACCOUNT. Due to Microsoft's security requirements, the hyperlink(s) contained in this e-mail may not automatically open your browser. If you experience any difficulty, please copy the link and paste into your browser. ** Tag: Queries about complier Tag: 114925
  - 17
    - LCD Display Problem Hi, i am using 640x480 TFT LCD 16bit mode. i have changed memory capacity also. when i power up the board it only displaying in 640x240 area left is black. i have written this code: #define MVAL (13) #define MVAL_USED (0) #define M5DNEW(n) ((n) & 0x1fffff) // To get lower 21bits //TFT #undef LCD_XSIZE_TFT #undef LCD_YSIZE_TFT #define LCD_XSIZE_TFT (640) #define LCD_YSIZE_TFT (480) //TFT #define SCR_XSIZE_TFT (LCD_XSIZE_TFT*2) //for virtual screen #define SCR_YSIZE_TFT (LCD_YSIZE_TFT*2) #undef HOZVAL_TFT #undef LINEVAL_TFT #define HOZVAL_TFT (LCD_XSIZE_TFT-1) // Valid VD data line number is 8. #define LINEVAL_TFT (LCD_YSIZE_TFT-1) #undef CLKVAL_TFT #define CLKVAL_TFT (6) #undef LCD_VBPD #undef LCD_VFPD #undef LCD_VSPW #undef LCD_HBPD #undef LCD_HFPD #undef LCD_HSPW #define LCD_VBPD ((31)&0xff) #define LCD_VFPD ((10)&0xff) #define LCD_VSPW ((1)&0x3f) #define LCD_HBPD ((87)&0x7f) #define LCD_HFPD ((39)&0xff) #define LCD_HSPW ((127)&0xff) //frameBuffer8Bit = (_U32 (*)[SCR_XSIZE_TFT*2*SCR_YSIZE_TFT])IMAGE_FRAMEBUFFER_DMA_BASE; s2410LCD->LCDCON1 = (CLKVAL_TFT << 8) | (MVAL_USED << 7) | (3 << 5) | (12 << 1) | 0; s2410LCD->LCDCON2 = (LCD_VBPD << 24)|(LINEVAL_TFT << 14)|(LCD_VFPD << 6)|(LCD_VSPW << 0); s2410LCD->LCDCON3 = (LCD_HBPD << 19)|(HOZVAL_TFT << 8)|(LCD_HFPD << 0); s2410LCD->LCDCON4 = (MVAL << 8) | (LCD_HSPW << 0); s2410LCD->LCDCON5 = (1 << 11)|(1 << 9)|(1 << 8)|(1 << 0); //BPP24BL:x,FRM565:x,INVVCLK:x,INVVLINE:x,INVVFRAME:x,INVVD:x, //INVVDEN:x,INVPWREN:x,INVLEND:x,PWREN:x,ENLEND:x,BSWP:x,HWSWP:x s2410LCD->LCDSADDR1 = ((IMAGE_FRAMEBUFFER_DMA_BASE >> 22) << 21 ) | ((M5D(IMAGE_FRAMEBUFFER_DMA_BASE >> 1)) << 0); s2410LCD->LCDSADDR2 = M5DNEW((IMAGE_FRAMEBUFFER_DMA_BASE + (LCD_XSIZE_TFT * LCD_YSIZE_TFT * 2)) >> 1 ); s2410LCD->LCDSADDR3 = (((LCD_XSIZE_TFT - LCD_XSIZE_TFT) / 1) << 11) | (LCD_XSIZE_TFT / 1); s2410LCD->LCDINTMSK |= 3; // MASK LCD Sub Interrupt s2410LCD->TPAL = 0; // Disable Temp Palette // 1:TFT Panel on 0:TFT Panel off // s2410LCD->LCDCON1 |= 1; // ENVID=ON cna any suggest me the what to do for this problem. -- Software Developer Johari Digital Healthcare LTD. INDIA Tag: Queries about complier Tag: 114892
  - 18
    - InitLocale in coredll.dll/map Hello All, I wud like to know the various cases in which InitLocale wud fail and cause a Data Abort. Warm Regards Yash Tag: Queries about complier Tag: 114891
  - 19
    - USB Interrupt pipe time out problem Hi , We experience a mind boggling problem during development of a USB driver for a monitor running WinCE 5.0. Our host computer is an ETX board Pentium Mobile 800 Mhz which includes a USB controller. Other hardware is developed in-house. Our monitor communicates with an in-house developed sensor via USB 1.1, passing data at 200 Hz over an interrupt pipe. This has been working satisfactory for some time. We now want to add a 3rd party USB device that also uses USB 1.1 to pass data at 2000 Hz to the monitor. Data communication with this device falls into two stages: a. a small header is sent over an interrupt pipe. b. actual data samples are collected from a bulk pipe. The header indicates how many samples to receive on the bulk pipe. Capturing the data is done through a thread in a stream driver implementation by ping-ponging between querying the 2 pipes for data. The monitor application in return has a thread running to scoop out the acquired data to the application. Thread priorities are set such that: Priority Driver thread > Priority Application Thread > Priority Application GUI thread Running both sensors at the same time in a normal state works OK. However, if we stress the host computer by creating a lot of GUI activity (signal drawing) the connection with the 3rd party device at a particular point interrupts. Our own device keeps functioning as normal. When we inspect the signals in our USB protocol analyzer it appears that the querying process to the 3rd party device suddenly stops. We added some logging code in our driver which, together with USB logging output, reveiled the following: 1. Our reading thread in the driver still loops after the interruption of collecting sample data 2. In the driver, at some point we see a time out on an IN transfer on the interrupt pipe 3. After that the interrupt IN pipe keeps returning time outs ( to the driver ) 4. the last 1 or 2 packes observed in the USB log are non-corrupt interrupt IN transfers 5. the host does not flip to reading the associated bulk pipe packet, possibly caused by the failing read (i.e. the time out on the interrupt package) 6. if a 2nd package IN transfer is fired after the first time out it comes after the time out period that we specified in the interruptreadpipe function Our conclusion is that even though a complete interrupt package was transferred through the interrupt IN pipe (as we saw in the USB log) WinCE did not "recognize" it as a valid transfer and fired a timeout. Our driver code is designed to continue attempting to read the interrupt IN pipe. We see the loop running and thus expect continuing Interrupt IN transgers. However, after that point no additional transfers are detected in the USB analyzer log. The driver keeps receiving time outs... My questions are: - is it possible that the USB driver stuff in WinCE comes into a state where a request to initiate an IN transfer is not passed to the lower level drivers / hardware after such time out? - can heavy load on the CPU (even when present in a lower priority threads) indeed jeoperdize USB stability We would appreciate your help.... Hans Tag: Queries about complier Tag: 114887
  - 20
    - Using Ce Registry notification functions problem! Hello, I am trying to use the registry notification function and get the notification info without success - non of the CeRegGetNotificationInfo info succeeded and GetLastError() does not return an error code. byte buff[1000]; code: hndChangeHandle = CeFindFirstRegChange(HKEY_LOCAL_MACHINE,TRUE,REG_NOTIFY_CHANGE_LAST_SET); dwErr = WaitForSingleObject(hndChangeHandle,INFINITE); lng = CeRegGetNotificationInfo(hndChangeHandle, 0,0,0,&dwReturnedBytes,&dwReturnedBytesAvailable); lngErr = CeRegGetNotificationInfo(hndChangeHandle,0,(PVOID)buff, 1000,&dwReturnedBytes,&dwReturnedBytesAvailable); Thanks in advance, John. Tag: Queries about complier Tag: 114873
  - 21
    - Question about activesync connection Dear All, I met a problem. It is about activesync connection. When the activesync is trying to create a connection between PC and device and the icon of activesync has turned green, you reset the device. Then the device will try to create a connection again when startup, but error happens. The error message is !!!!!!!CeEventHasOccurred NOTIFICATION_EVENT_RS232_DETECTED!!!!!!!!!!!!!!! AUTORAS:: Dialer notifies: [1] [Dialer Start] ERROR: OALIoCtlHalGetDeviceInfo: Device doesn't support IOCTL_HAL_GET_DEVICE_INFO::SPI_GETUUID RASCS_Disconnected: Ecode=619 Posting WM_NETCONNECT(FALSE) message, ErrorCode = 619(0x26B) If you plug-off usb cable and plug-in again, the activesync works again. Anybody knows this problem and has the solution? Thanks. Tag: Queries about complier Tag: 114862
  - 22
    - BSPin PB for CE6.0 - Not Recognised After Installation & Usage... Hello All, I had previously successfully installed a BSP, created an ODDesign, Built the project, Executed the Image on Target H/W - All successfully in the last few weeks. But now, for some reason, when I try to create a new OSDesign, PB does not recognize my existing BSP. However, it is listing other BSPs in my system that are installed (by default, when I install CE 6.0). What could be the problem? I really don't want to uninstall PB, my installed SDKs, and re-install everything - I have already done that many many times - although for other reasons. Its a very laborious process.... Is there a file (some confg file, xml file...etc), that PB looks for when it searches for installed BSP? The funny part is, I can load my existing OSdesign, build and play with it - just fine. And this OS design is based on the BSP that I'm interested in. But I cant seem to create a new OSDesign that uses the same BSP (as above).... Thanks. Tag: Queries about complier Tag: 114858
  - 23
    - Exception 'Data Abort'(4) ... When booting driver Hi, I have a wince6 driver. I am running the driver on an ARM11 platform. On Debug mode the driver works fine and boots up. On release mode the driver doesn't boot. I get the following exception: Exception 'Data Abort'(4) Thread-Id=03530002(pth=880aa000) PC=8403185c BVA=d3acafc4, dwInfo = 0000080f R0=8403dffc R1=d3acb034 R2=d3acb0ac R3=00000000 R4=8403e0e0 R5=00000004 R6=848e64b8 R7=880aa000 R8=00000000 R9=00000000 R10=d3acb0ac R11=8403dffc R12=00000000 SP=d3acb014 Lr=84031a68 Psr=8000001f Can you help me figure out what is causing this, and how can I fix it? Thank you Tag: Queries about complier Tag: 114857
  - 24
    - (NOR) FAT/TFAT problem. Hello All, My device uses Intel StrataFlash P30 (32 and 64 MB). It stores Eboot, NK, other configurations and Filesystem. TFAT support is activated. Following are the registry settings. [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash\FATFS] ;"Flags"=dword:600034 ; FATFS_DISABLE_AUTOSCAN, FATFS_ENABLE_BACKUP_FAT, FATFS_FORCE_WRITETHROUGH ;FATFS_TFAT_ALWAYS, FATFS_FORCE_TFAT "Flags"=dword:00290014 "FormatTFAT"=dword:1 "EnableWriteBack"=dword:1 "CheckForFormat"=dword:1 "TfatMarkAlways"=dword:1 "NonatomicSector"=dword:1 "DisableAutoScan"=dword:1 "Util"="fatutil.dll" [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash] "Name"="MSFLASH for P30FLASH" "Folder"="NOR Flash" "FileSystem"="fatfsd.dll" "PartitionDriver"="mspart.dll" "Util"="fatutil.dll" "AutoPart"=dword:1 "AutoFormat"=dword:1 "AutoMount"=dword:1 "MountFlags"=dword:2 "Flags"=dword:00290014 "MountAsRoot"=dword:1 "MountAsBootable"=dword:1 "Paging"=dword:0 "EnableCache"=dword:0 ;For PowerManagement "ActivityEvent"="PowerManager/ActivityTimer/SystemActivity" [HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\MSFlash] "DriverPath"="Drivers\\BuiltIn\\P30_flashFMD" "LoadFlags"=dword:1 "Order"=dword:0 "BootPhase"=dword:0 [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\P30_flashFMD] "Dll"="P30_flash.dll" "Order"=dword:2 "Prefix"="DSK" "Ioctl"=dword:4 "Profile"="MSFlash" "IClass"="{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" ;Start file system at a 21MB offset to allow for image in flash "MemBase"=dword:BBE00000 "MemLen"=dword:00900000 The problem is, during file copy operation, if power goes off, the FAT corruption is observed. The device stops booting on next power cycle. The log is Booting image from partition 0. Redundancy disabled +Windows CE Kernel for ARM (Thumb Enabled) Built on Feb 8 2007 at 23:36:51 ProcessorType=0411 Revision=7 sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 8010706c Version Number: 2.0.0.5 Sp=ffffc7cc OEMIoControl: Unsupported Code 0x101008c - device 0x0101 func 35 INFO: FMD_Init: Flash Address=0xbbe00000 Length=0x900000. FMD_OEMIoControl: unrecognized IOCTL (0x71c24). OEMIoControl: Unsupported Code 0x10100c4 - device 0x0101 func 49 ===> hangs here. Tried turning on debug prints from read/write routines of FMD driver. It looks like the read routine is called infinite times from upper layer. Can anyone suggest what could be going wrong?... It's appreciated for any advises. Thanks in advance. Suvarna. Tag: Queries about complier Tag: 114856
  - 25
    - Build all extra projects "clean" when doing a Sysgen and Make Image Hello. First off, I am using Platform Builder for Windows CE 5.0. Our pbxml workspace file includes multiple pbpxml project files for our custom drivers. When a sysgen is performed with "Build OS -> Clean before building", everything works as expected except the pbpxml projects are not cleaned before being built. This occurs even when "Build Project -> Clean Before Building" is set before the sysgen. The pbpxml projects are cleaned before building when "Build Project -> Build all projects" is performed. Digging into the build tools, I see that blddemo.bat has the line PBXmlUtils /generatebuildfiles, which creates the batch file PBPostSysgenProjects.bat among other things. This PBPostSysgenProjects.bat file is what builds the pbpxml projects, but calls build.exe with the flag -nmake cleantgt&&build. To work as I want, I think it should call build.exe with the flag -c. How can I get the sysgen process to perform a clean and build on the pbpxml projects? Thanks and best regards, Jerel Tag: Queries about complier Tag: 114852
- Next
  - 1
    - Iamge download - Serial All, We are thinking of using serial port for image download. I browsed this group for some pointers but I was not able to find any. Can I download the nk.bin using serial port ? What are all the changes that I should be doing ? Any help guys. Reg, Venkatesh Tag: Queries about complier Tag: 114848
  - 2
    - USB HOST Suspend I'm currently working in PXA270 based board. Whether WinCE6.0 supports USB Selective Suspend(Suspending particular port) functoinality? If yes please give me some tips about how to do that? Tag: Queries about complier Tag: 114847
  - 3
    - flashing eboot makes the image downloading failed I have flashed the eboot.nb0 on intel pxa27x in windows ce 5.0 platform builder. If i attach the target device, it keeps on downloading and at one stage it is disconnecting automatically.could u anyone clarify wat is happening in this case. thanks in advance., -- Message posted via PocketPCJunkies.com http://www.pocketpcjunkies.com/Uwe/Forums.aspx/wince-pb/200808/1 Tag: Queries about complier Tag: 114846
  - 4
    - Does WinCE 5.0 supports Cyrillic Font ? Does WinCE 5.0 support Cyrillic fonts ? I could not find it in the font catalog. Should I have to install any patch for the wince 5.0 to get this ? How do I go about getting this font for my embedded device ? Regards Esha Tag: Queries about complier Tag: 114841
  - 5
    - When Copying EXE file, the default icon is shown instead of actual 1. Please copy EXE file to any place 2. The actual program ICON of this EXE file is not displayed, but instead the Default ICON(IDI_APPLICATION) is shown 3. After re-booting the device, the correct program icon is shown repeating above steps reproduces same issue after copying it to anyplace, when i rename the file, the correct icon is shown When copying in IconCach.cpp, it seems that ExtractIconEX does not get the value of the correct icon Could you please tell me what i should do to solve this issue The OS is Windows CE 6.0 Tag: Queries about complier Tag: 114839
  - 6
    - Wavedev2 loading problem Hiii Using Ensonic sample i have built wavedev2 driver for my audio codec. i have Waveform Audio, Waveform Audio Renderer , Wave File Parser component from the catalog in my image.Am able to load the driver for my ARM11 target platform on wince6. At the end of the bring up am expecting WAV_Open getting invoked but it fails to do so~~~~~. Meanwhile if sample application calls createfile("WAV1:") invokes the driver call WAV_Open successfully. These are my registry settings. [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev] "Prefix"="WAV" "Dll"="osk_wavedev2.dll" "Index"=dword:1 "Order"=dword:14 "Priority256"=dword:60 "AudioDMAAreaBase"=dword:8BE7F000 "AudioDMAAreaSize"=dword:00002000 [HKEY_LOCAL_MACHINE\Audio\SoftwareMixer] "Buffers"=dword:4 Any sugestion or pointers is apreciated. Thanks in advance. -- Vikram Bangalore Tag: Queries about complier Tag: 114838
  - 7
    - Flashed eboot issue on Intel pxa27x I have flashed the eboot.nbo(192.29.8.102) previously it was (192.29.8.101) using Jflash on intel PXA27X. But if i try to download the image it keeps on downloading and at one time,the downloading stops.Anyone can tell me the reason and the solution for this issue. Thanks in advance. -- Message posted via http://www.pocketpcjunkies.com Tag: Queries about complier Tag: 114837
  - 8
    - Want to save data hi, i have a flash on my board.On power up it start downloading image from FLASH to RAM and then run WINCE5.0 from there.In this way each time when i power up the system it start downloading fresh image from FLASH, so i am not able to save data through my .NETCF application. so is there any way to save data through my application. -- Software Developer Johari Digital Healthcare LTD. INDIA Tag: Queries about complier Tag: 114836
  - 9
    - Remote Performance Monitor - update very slow Whenever I use Remote Performance Monitor it seems that selecting the cpu % usage creates a huge lag in the display update. When monitoring other metrics, such as memory load, etc. the display refresh is very regular at ~ 1000 milliseconds. The cpu % metric is update about every 10 seconds making it barely useful. Is this a know/expected behavior? Is there something I can do to remedy this? Thank you, - eepcat Tag: Queries about complier Tag: 114825
  - 10
    - My file system driver does not expose DSK1: in the Control Panel Hello, I have a "self-made" file system driver. Unfortunately, I cannot see a corresponding "DSK1:" entry in the Storage Manager Control Panel applet. I am using the following autoload registry keys: [HKEY_LOCAL_MACHINE\System\StorageManager\Autoload\MYFSD] "Flags"=dword:1000 "Dll"="myfsd.dll" "Paging"=dword:1 "Bootphase"=dword:0 "LoadFlags"= dword:1 "MountAsBootable"=dword:1 What is missing in order to see "DSK1:" in the Control Panel? Peter Tag: Queries about complier Tag: 114809
  - 11
    - Embedding external DLL in NK.bin When I try to add an external DLL into the run-time image NK.bin, adding a line in project.bib like this one: MyDLL.dll (Mypath)\MyDLL.dll NK C I get this error when PB calls MakeImage: "Runtime Error! Program C:\WinCE600\public\common\oak\Bin\i386\romimage.exe, this application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information." Instead, I never get that error if I include DLLs created by PB projects. The one I want to include is created under a Windows for desktop (2k, XP), but it should be compatible (it's a tool downloaded from Internet, and it says it's CE compatible). Tag: Queries about complier Tag: 114805
  - 12
    - Can I expose SD and internal NAND as separate drives on USB host? Hello all, I have a WinCE 5.0 BSP for a device on which the customer wants to access the internal NAND flash and an attached SD card simultaneously from a host PC as individual disk drives. I've added the blocks to platform.reg mentioned in the online help and various examples I've seen (reproduced below), but the two cannot be seen at the same time. I have noticed that the "DeviceName" key is described in the singular as identifying "the name of the store to expose to the USB host." Do I infer from this that it is not possible to expose more than one store in this manner? If this can be done, what would the registry keys look like? Also, can anyone provide a citation of Microsoft literature discussing this area, so that I can better explain if there exists a design limitation preventing simultaneous visibility of more than one store. Thanks, Craig Blome [HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers\Mass_Storage_Class] "DeviceName"=- ; erase previous default "DeviceName"="DSK1:" [HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers] "DefaultClientDriver"=- ; erase previous default ; "DefaultClientDriver"="Serial_Class" "DefaultClientDriver"="Mass_Storage_Class" Tag: Queries about complier Tag: 114804
  - 13
    - Location of Frame Buffer Hi, I am working on an ICOP x86 300 Mhz based deviced with Windows CE 6.0. We generated the OS image. I would like to reach directly the VGA memory to make some fact graphic operations. VGA controller is XGI Volari Z9s. I worked with s3c2410 before, this unit has source code for the LCD and also headers for memory area that the LCD frame buffer use. How can I find the memory area for VGA for this unit? in config.bib the memory are as: DMA 80100000 00030000 RESERVED ; Native DMA reserved. BOOTARGS 801FFF00 00000100 RESERVED ; Boot arguments EDBG_DMA 80200000 00020000 RESERVED ; EDBG DMA buffer FRAMEBUF 800A0000 00020000 RESERVED in startup.asm _OEMAddressTable: dd 80000000h, 0 Any idea wellcomes. Best regards, Tag: Queries about complier Tag: 114798
  - 14
    - LCD Display i have 320x240 LCD but i want to use only 300x200 display area. can any tell where i have to change in display driver. -- Software Developer Johari Digital Healthcare LTD. INDIA Tag: Queries about complier Tag: 114796
  - 15
    - MMC card write error - dropping bit 7 We have a strange error with some MMC cards. OS is CE5 PXA255 MMC card formatted with FAT. With some MMC cards, currently the issue with with 1 1GB "MMCplus" card, the writes to the card do not work correctly. I have turned on FATFS_VERIFY_WRITES but still the problem persists. I would have hoped this would have ensured the writes occur correctly? It is only ever a byte or two within a file and it is always the top bit (bit 7) which is dropped from 1 to 0. (e.g it should be C5 but is actually 45). It is not always the same byte in the file, not always the same file (for example when extracting a CAB file different files get corrupted on different attempts) This happens for files written by CE5 on the device. If I remove the MMC card and read it in a card reader on a PC it shows the missing bit(s) in the file(s). If I write to the card using the card reader the write is successful I have tried reducing the maximum MMC clock speed from 10MHz to 5MHz but still the same effect. Any other ideas? Any ideas how we can figure out why its failing? Thanks Andrew Tag: Queries about complier Tag: 114788
  - 16
    - Program memory usage in Windows CE 5.0 Hi there, I have a question on Program memory usage in Windows CE 5.0. When I copy a file from one location to another on the device I see incerase in program memory usage. (For example from MyDocuments to Desktop). But if I delete the same file from desktop and recycle bin, I don't get back the memory allotted during the copy. Is this memory leak in Windows CE 5.0 filesystem? If not why Windows CE behaves like this? Who uses that memory? How to avoid this happening? Any inputs will be helpful! Thanks Tag: Queries about complier Tag: 114787
  - 17
    - How to change USB function driver endpoint address ? Hi I tried to modify USB Serial function driver PDD usbfndrv.cpp #define USB_VERSION 0x220 -----> 0x110 #define BULK_IN_ENDPOINT_ADDRESS 0x81 ----> 0x84 #define BULK_OUT_ENDPOINT_ADDRESS 0x02 ----> 0x04 Then I use USBView to see new description, but only VERSION info change . How can I change the endpoints for Bulk mode in and out ? Thank you . Tag: Queries about complier Tag: 114786
  - 18
    - Windows CE 5.0 Internet Explorer We currently build Internet explorer 6.0 into our Wince500 OS, selecting view->option allows me to set various options in the following Tabs, General, Connection, Security, Privacy, Popups, for some bizarre reason I cannot check/uncheck the boxes in the advanced TAB. These are options such as Disable automatic sip, enable stylesheets, play sounds in web pages, security->use ssl 2.x, 3.x etc. Regards Tag: Queries about complier Tag: 114785
  - 19
    - C# DeviceApplication how to add Windows Media Player component? Hi all, I'm using VS 2005 and target device (OS Design : Custom Design)Windows CE 6.0 I'm new create a project VS 2005 >> C# >> Smart Device >> Windows CE 5.0 >>Device Application template. Toolbox rigt click > Choose items > Com components > WMP wmp.dll add I cannot see media player controls in the toolbox...However if I choose C# > Windows > Windows application template i can see the control and use it. Thank You... Tag: Queries about complier Tag: 114780
  - 20
    - does R2 FLASH MDD/PDD supports MBR? As the doc says, MDD/PDD won't support MBR, is it right? If so, how can I create multi partitions in bootloader? In FAL/FMD, I use bootloader to create MBR to support BINFS & FATFS on one NAND chip, if MBR doesn't work, could you give me a way to implement this? thanks Tag: Queries about complier Tag: 114777
  - 21
    - Unresolve externals while building OAL. Hello, I m implenting RTC logic for Davinci(Dm6446).... for RTC logic communicates with davinci via I2C protocol... So in RTC logic sources file i have included I2C lib. and in OAL i have link RTC.lib...... but while building OAL i m facing with unresolved external sumbols--> closehandle,getlasterror,WaitForSingleObject,ReleaseMutex and like some others which are declared inside i2C.lib which are declared inside I2C code... but OAL layer does not support the above functions...thats why getting that errors... So do u have any idea ???how to resolve this OAL level issues??? Tag: Queries about complier Tag: 114776
  - 22
    - How to get LAN icon in Intel PXA27X using Windows CE 5.0 Platform I am working with Intel PXA27X using Windows CE 5.0. What should i do to get LAN icon in the (Network and Dialup Connection in the board). Thanks in advance.. Tag: Queries about complier Tag: 114773
  - 23
    - I am not getting lan icon in Intel PXA27X board using windows CE 5.0 I am working with Intel PXA27X MainstoneII board on Windows CE 5.0. I have added catalog icons NE-2000 compatible (PCMCIA) to OS design but still i am not getting LAN icon in (Network and Dialup Connections in the board..Tell me what i need to do to get LAN icon in the board..Thanks in advance Tag: Queries about complier Tag: 114771
  - 24
    - damenkleidung kaufen fuer islamische damenbekleidung bestellen damenkleidung kaufen grosse groessen damenkleidung kaufen in grossen damenkleidung kaufen uebergroessen damenkleidung kaufen fuer islamische damenbekleidung bestellen damenkleidung kaufen grosse groessen damenkleidung kaufen in grossen damenkleidung kaufen uebergroessen + + + +++ DAMENKLEIDUNG KAUFEN +++ DAMENKLEIDUNG ONLINE BESTELLEN +++ + http://WWW.DAMENKLEIDUNG-KAUFEN-24.INFO http://WWW.DAMENKLEIDUNG-KAUFEN-24.INFO http://WWW.DAMENKLEIDUNG-KAUFEN-24.INFO http://WWW.DAMENKLEIDUNG-KAUFEN-24.INFO http://WWW.DAMENKLEIDUNG-KAUFEN-24.INFO http://WWW.DAMENKLEIDUNG-KAUFEN-24.INFO http://WWW.DAMENKLEIDUNG-KAUFEN-24.INFO + + + +++ DAMENKLEIDUNG KAUFEN +++ DAMENKLEIDUNG ONLINE BESTELLEN +++ + http://WWW.MAENNERKLEIDUNG-KAUFEN-24.INFO http://WWW.MAENNERKLEIDUNG-KAUFEN-24.INFO http://WWW.MAENNERKLEIDUNG-KAUFEN-24.INFO http://WWW.MAENNERKLEIDUNG-KAUFEN-24.INFO http://WWW.MAENNERKLEIDUNG-KAUFEN-24.INFO http://WWW.MAENNERKLEIDUNG-KAUFEN-24.INFO http://WWW.MAENNERKLEIDUNG-KAUFEN-24.INFO + + + + +++ UEBERGROESSEN KAUFEN +++ UEBERGROESSEN ONLINE BESTELLEN +++ + http://WWW.UEBERGROESSEN-KAUFEN-24.INFO http://WWW.UEBERGROESSEN-KAUFEN-24.INFO http://WWW.UEBERGROESSEN-KAUFEN-24.INFO http://WWW.UEBERGROESSEN-KAUFEN-24.INFO http://WWW.UEBERGROESSEN-KAUFEN-24.INFO http://WWW.UEBERGROESSEN-KAUFEN-24.INFO + + + http://www.gamesforum.ca/showthread.php?t=316022 http://www.geschirr-online.info/ - Geschirr Online Bestellen http://groups.google.de/group/hdmi-cable/browse_thread/thread/7765af3b2e0c5639# zero damenbekleidung bestellen grosshandel damenbekleidung bestellen designer damenbekleidung bestellen damenbekleidung bestellen gr 46 damenbekleidung bestellen duesseldorf only damenbekleidung bestellen damen jacke bestellen opus damenbekleidung bestellen damenbekleidung bestellen duesseldorf damen kleidung in bestellen la martina damenbekleidung bestellen second hand damenkleidung kaufen damenkleidung kaufen tragen damenbekleidung bestellen xxl damenmode bestellen www damenbekleidung bestellen damenbekleidung bestellen onlineshop hirsch damenkleidung kaufen damen bekleidung bestellen damenbekleidung bestellen in berlin damenbekleidung bestellen in uebergroessen damenkleidung kaufen fuer maenner damen kleidung bestellen indische damenbekleidung bestellen kataloge damenbekleidung bestellen damen jacken bestellen damenbekleidung bestellen guenstige damenkleidung kaufen adidas damenbekleidung bestellen oilily damenbekleidung bestellen mode damenbekleidung bestellen damenkleidung kaufen guenstig damen pullover bestellen adidas damenbekleidung bestellen mango damenbekleidung bestellen groessentabelle damenbekleidung bestellen Tag: Queries about complier Tag: 114769
  - 25
    - PM PDD Choise? Hi I want to know have any principles need to take care for PM PDD choising ? Thinks Tag: Queries about complier Tag: 114767

In my project I'm use ARM 1176JZF-S processor, the chip provided by Samsung
(S3C6400).
My queries are:
1. Does Microsoft WinCE Platform builder supports ARMv6?
2. Can I use ARMâ??s Real View Complier (RVCT3.0) or GNU complier for ARM with
Microsoft SDK?

Top

RE: Queries about complier by Sheetal

Sheetal
Wed Aug 20 23:56:01 PDT 2008

Hi Prasanna,

CE 6.0 has support for ARMv6. See this -
http://download.microsoft.com/download/a/0/9/a09e587c-4ff9-4a58-a854-56fe50b862b2/release%20notes.htm

Regards,
-Sheetal.

"Prasanna" wrote:

> In my project I'm use ARM 1176JZF-S processor, the chip provided by Samsung
> (S3C6400).
> My queries are:
> 1. Does Microsoft WinCE Platform builder supports ARMv6?
> 2. Can I use ARMâ??s Real View Complier (RVCT3.0) or GNU complier for ARM with
> Microsoft SDK?
>

Top