Problem with ActiveSync Partnership using 2 LAN connections

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Difference b/w CSP Drivers and BSP Drivers HI All, CAn you put some light on diff b/w CPU Support package drivers and BSP drivers? Thanx, Karthik Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71768
  - 2
    - CPU Support package issue Thanx Steve, I apologize for breaking the thread. I have CPU Support Package(drivers) source for LH7A404 ARM 9 processor,If I need to make CE 5.0 BSP then should I need to compile it to have ARM Lib? How to include it to the PB with the CSP source for the target to create the CE 5.0 BSP. Regards, John Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71766
  - 3
    - Active Sync connection with WinCE device I am new to this enviormment .I have just started using platform builder. I have creted an O/S image using Platform builder. when i download this to device and tried to connect with host PC runing Active syn on the host PC .Host PC does not detect any device on USB . Can any budy tell what components i must include into the O/S image so that ,Host PC get connected with this . I am using USB calbe for connection. Please help me. Regards Manish Budhia Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71765
  - 4
    - Error message is showed by media player Dear All: I'm implemented the SDIO driver and I test it via play the WMV file that stored in SD card. When this file was played about 10 minutes, the media play show the message " An unknown error 0x8007000E has occurred". Is any body knows what error happened and how can I fixed it? Thanks ...... Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71761
  - 5
    - impossible CE SDK installation Why is impossible to install a custom x86 based SDK created using Platform Builder 5.0 ? The same error trying to install the STANDARD_SDK.msi coming on the CDROM in the \eVC\SDK500 directory. When I install (on different PCs too) I always get the following dialog box : 'software development tools required to use this SDK for developing applications are not installed on this dev station .....' Any help will be greatly appreciated. TIA Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71757
  - 6
    - SA1110 vs PXA255 Hi We have SA1110 runing wince.net 4.2 based hardware, I attach this to usb and install cisco aironet 350 drivers. (latest downloaded from the cisco website). All works well and the site survey tools also function correctly. We also have PXA255 running wince.net 4.2 based hardware, again I can down install the above drivers, but this time when I try to run say the aironet client Utility all I get is a message saying it is not a valid windows ce application. What on earth is going on, I have had similar results with a totally different wireless card, but ir wouldn't install the driver at all complaining that the device was not compatible, what are we doing wrong with the PXA255 hardware.... Any advce would be appreciated... Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71719
  - 7
    - platform builder for bootloader hello, I am developing a bootloader for omap using wince 5.0,can anyone tellme whether can i use the platform builder to build my bootloader instead of using wince command prompt,why in the documentation they are specifying to use the command prompt. Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71718
  - 8
    - Deploy from VS2005 to Windows CE 5 Hi all, I can't deploy my device application written in Visual Studio 2005 (Beta2) on my target that have Windows CE 5.0. I have read this article but I can't deploy : http://blogs.msdn.com/vsdteam/archive/2005/04/28/413304.aspx Can you give me some solution or idea ? Thanks for answer Stefano Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71709
  - 9
    - How to backup platform builder settings Hi all I'm running WinCE 5.0 on a VIA CE PC platform. Our image is pretty straightforward and dervied from one of the standard templates. I'd like to archive (into source safe) the principle files that 'control' the build of our OS image so that, if the worst happened, we could reinstall CE and the VIA platform and be able to reliably repeat the build of our image. I'm not worried about auto-generated files, just the ones that control the build process itself. In addition to the main pbxml file in my workspace directory, there are quite a few files in WinCE500\PBWorkspaces\MyWorkspace\WinCE500\VIACN_x86 directory that seem to be involved. Also, making changes from within platform builder also affects files in the WinCE500\Platform\Viacn directory. This is a little odd as we have more than one workspace that use the Viacn platform but need different settings. Are there any other files in locations affected changes made in PB? Any clues, advice or references much appreciated Sean Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71705
  - 10
    - Changing a BSP dependency Hello, I am using PB 5.0 with a BSP from VIA technologies, because my SBC is based on a complete VIA chipset, All is identical to the VIA board except for the Ethernet controller mounted on my SBC which is a RealTek RTL8139 When I try to remove the VIA Rhine LAN, Platform Builder pops up a message saying that many features depend on that component. I'd like to replace the VIA Rhine LAN with RealTek RTL8139, and not removing the LAN. So I wonder if is possible to modify an existing BSP changing one of its components, and where PB knows that a component is related to another. Can I remove this dependency ? TIA Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71704
  - 11
    - Issues with Blutooth-netwok Component Hello All, As i am developing a blue tooth application, i am changing some of the implementation of network component of AUDIO GATEWAY. I have my application with simulates outside netwok and from which i simulate incoming calls. SO, i am finding ------> problems with proper understanding of sequence of events occurs --how netwok component & AG behaves 1) when there is incoming call.. 2) when there is a incoming call and u press answer button on headset. 3) When SCO channel is estableshed 4) which components opens the audio driver--scosnd(sample bluetooth audio driver) and when? Please help me to find out the event sequences in these cases.. Thanks a lot in Advance and hope i will get a reply soon, Darshan Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71703
  - 12
    - problem in downlading HLBASE image to ARMINTEGRATOR board Hello All, I Have devloped an Headless based OS(4.2) image(Tiny Kernel) and i am trying to download to ARMINTERGRATOR board. I can successfully download it to platform but as soon as it downloads it stucks i couldnt see CESHELL on my PB coming after that. I can see only This messages I debug out put "Kernel debugger is waiting to connect with target." And On serial port the messages is "INFO: Jumping to ima"...Well it should be complete "INFO: Jumping to image" like this as i found in main.c in EBOOT directory. (Debugger ,KITL, Target Control all are enabled) So what can be the problem plz help me find out. Thanks in Advance, Darshan Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71702
  - 13
    - touch screen Calibration problem?help please! hi all: am using pb4.2 on the s3c2440a of SUMSANG, with one touchpanel(640*480), four line resistance type. The ADC and touch control can sample different data at different point. now my probelm is: In platform.reg, the key [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH] "MaxCalError"=dword:7 "CalibrationData"="1284,968 260,192 272,1760 2304,1748 2296,208" 1. Is only the Calibration of the control panel using both of the CalibrationData and MaxCalError. 2. When I run the Calibration program, it always run and donot exit. Is MaxCalError meaning it only run 7 times. 3. The CalibrationData is the five points's uncalibrating value, which are sampled and filtered in the PDD. 4. My panel's raw data is that , in the same x direction the value is not the same. also with the Y direction. Is this affecting the calibration. thanks in advance. Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71700
  - 14
    - Wince protect resources Hi all, I have a general question. Is it possible under Windows CE to protect resources of the system, like GPIOs, or special memory areas? I wanted to protect some areas of the system, thus application can access them directly. On our platform all CPU resources are memory mapped and with a simple VirtualAlloc/VirtualCopy an application can have fully access to that resources. Now I want to restrict that to have a better control, but do not know exactly if it is possible under Windows CE. Thanks for any kind of help or advice. Best regards, Mike Engel Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71698
  - 15
    - Graphical Shell problems Hi, Can I use a PPC-like shell in my WinCE 5.0 ? and how to? Best regards, Jack Zhao Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71693
  - 16
    - How to add a virtual WAV driver ? Hi all: My paltform,CE5.0,already has a buildin WAV driver(for AC97).And,I want to add a virtual WAV driver,which does only for Bluetooth AG routing.How can i do it ? And I find a parameter uDeviceID in waveOutOpen(), how do I use it? Anything else to be setted in the registry ? Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71690
  - 17
    - Info needed about CSP Hi, I'm newbie Win CE, I have CSP Driver sources for ARM Processor can I use the same sources for creating new CE 4.2 BSP and CE 5.0 BSP on it, using appropriate PB. Thanx & Regards, John Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71688
  - 18
    - Missing tools to install SDK (PB5.0) Hello I have installed PB 5.0 and eVC SP4. When i create an SDK from PB and then try and install i get the following dialog box : 'software development tools required to use this SDK for developing apps are not installed on this dev station .....' This dialog links to a webpage where I can download (again) eVC and some other things that I suppose are already installed or on PB5.0 CDROM. Using PB4.2 I never had those problems installink a custom SDK. What is missing ? What do I need to install my own SDK ? Any help will be appreciated. TIA -- Shutruk Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71686
  - 19
    - Re:How to include CSP HI Steve, Thanx, I have only the ARM CSP sources for the drivers. I don't have the library built for ARM. Do I need to built it for ARM target. Please let me know. Regards, Johns Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71683
  - 20
    - BSP problem i have a binary BSP for WinCE4.2 how can updata into WinCE5.0 a project Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71678
  - 21
    - ietheme.dll I built a kernel for an Internet Appliance using CE.50 after downloading all the latest updates (quite a few). It would hang in booting because it tries to download iectl.dll from RELFSD. For some reason ie.bib is renaming iectl.dll as ietheme.dll like this: ; @CESYSGEN IF IE_MODULES_IECTL ietheme.dll $(_FLATRELEASEDIR)\iectl.dll NK SH ; @CESYSGEN ENDIF IE_MODULES_IECTL I also had to add ietheme.dll to the platform before internet explorer can load the msn homepage. Is this a problem? Why is ietheme.dll really iectl.dll? My RELFSD isnt working, but I am debugging that, I think it is something to do with the networking setup on my platform builder workstation. Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71672
  - 22
    - Cannot license run-time image I am attempting to run the binary image license utility in PB CE 5.0 When I enter my product key from the distribution package, I get an error that says "Cannot license the binary image. The license entered is invalid". So what "license key" is the utility looking for, if it's not the Product Key on the inside of the CD case? Thanks Chuck Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71671
  - 23
    - What consume memory on startup? Hi, When Windows CE is running the total memory that can be allocated does not match with the total physical memory of the device. In the Memory tab of the System Properties the sum of the two types of memory is smaller than what I expect. I know that the first ~2MB of memory is reserved in config.bib forthe BIOS, bootloader, video buffer... Then the nk.bin file is loaded in RAM and the size it takes may be found with the viewbin.exe tool. What I'm not able to find is what else consume memory? On my device it is 6MB that is not available: 256MB of RAM - 2MB for BIOS - 14MB for nk.bin - Total memory that may be allocated = 6MB. I guess that the OS needs a little bit of memory at start to create heap, stack, ect. but I don't think that it takes as much as 6MB. Does anybody know what takes memory or know a way to find it out? Thank you for your help Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71668
  - 24
    - NOR flash Hello all, WINCE 4.2, Debug Build, RAM based registry, NO PCMCIA/CF. i am trying to use on-board strata flash as a NOR flash driver. we have two banks of flash in our platform, bank1 (32MB) is used for Eboot loader /XIP... so its untouchable (no driver is used for it, its erased by EBOOT loader in retail mode when OS is downloaded to it, its not erased by Ebootloader in debug mode) bank2 (32 MB) is not used.. we want to be able to use it to save registry/data... our platform is not supported by intel IPSM or datalight FlashX, otherwise we could have just used bank1 for Data/code execution... i am very new to FAT/OS/Flash... so bare with me now, i mapped bank2 to an un-used memeory area in out processor, i see the driver being loaded, flash being formatted, mounted, then unmounted... the same settings will work in debug mode if i use bank1 MemBase Address and MemLen. but i need Bank1 for XIP... (retail build) when i use bank2,the MSFlash partition is available in storage manager, i can format it, but i will not be able to mount it.. storage manager however doesnt show the right parameters for it ( i see different messages when i try manually to format, then mount the parition, but it also fails -from the debug messages below, i c some weired messages such as " NumSec=-1008 BytesPerSec=512 FreeSec=-282727629 BiggestCreatable=-1525897972 4294892157 PID:adf584ce TID:2df430aa 0x8df58000: Partition PART00 NumSectors=-1010 " Q1) why the number such as NumSec are negative? i understand its 64-bit value, doesn negative number means error ? Q2) when use bank1, i see the message "PD_FormatPartition - type is 4" and it works, when ise use bank2, i see the message " PD_FormatPartition - type is 11" , i use the same registry settings for both whats the difference between these two types? please help thanks below are my registry settings platform.reg =================================================================== [HKEY_LOCAL_MACHINE\init\BootVars] "SYSTEMHIVE"="system.hv" "DefaultUser"="User" ;Added 07.22.2005 "Flags"=dword:1 ; (added ) "Start DevMgr"=dword:1 ; (original) ;end addition IF STRATA_FLASH ; this section is not enclosed in "HIVE BOOT SECTION" [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\StrataFMD] "Dll"="stratad.dll" "Order"=dword:2 "Prefix"="DSK" "Ioctl"=dword:4 "Profile"="MSFlash" "IClass"="{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" "MemBase"=dword: A8000000 ;this value works for bank1 A0040000 ;A0020000;A0000000;A0009000;A0030000;A000F500;A0000000 "MemLen"=dword: 02000000 ;this value works for bank1 01FC0000 ;01FE0000;02000000;01FF7000;1FD0000;02000000;00800000;01FF0B00;02000000 ;Added 07.21.2005 commented out ; Override names in default profile ;[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash] ; "Name"="MSFLASH for STRATAFLASH" ; "Folder"="NOR Flash" ;[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\MSFlash] ; "DriverPath"="Drivers\\BuiltIn\\StrataFMD" ; LoadFlags 0x01 == load synchronously ; "LoadFlags"=dword:1 ; "Order"=dword:0 ;end addition ;;Added 07.21.2005 [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash] "Name"="MSFLASH for STRATAFLASH" "DefaultFileSystem"="FATFS" "Folder"="NOR Flash" "PartitionDriver"="mspart.dll" "AutoMount"=dword:1 "AutoPart"=dword:1 "AutoFormat"=dword:1 "MountFlags"=dword:2;2(original value) , i tried (11:didntwork), [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash\FATFS] "Dll"="fatfsd.dll" "Flags"=dword:00100024 ;(original value) "Util"="fatutil.dll" "Paging"=dword:1 "CacheSize"=dword:0;(original value) "FormatTfat"=dword:1 ;Added 07.21.2005 "MountFlags"=dword:2; ; ;end addition ENDIF STRATA_FLASH debug output [upon startup], bank2 used =============================================================== DEVICE!ActivateDeviceEx(Drivers\BuiltIn\StrataFMD) entered 4294773777 PID:adf39802 TID:adf5bdf6 0x8df391b4: >>> Loading module stratad.dll at address 0x026E0000-0x026F2000 (RW data at 0x01F08000-0x01F08AF4) Loaded symbols for 'C:\WINCE420\PUBLIC\CENET42_SIID\RELDIR\HITACHI_PFM-DS11_SH3DEBUG\STRATAD.DLL' 4294773808 PID:adf39802 TID:adf5bdf6 0x8df391b4: FMD_Init: READ_FROM_REGISTRY 4294773811 PID:adf39802 TID:adf5bdf6 0x8df391b4: FMD InitializeFlash pBaseAddress=a8000000,FlashLength=2000000 4294773813 PID:adf39802 TID:adf5bdf6 0x8df391b4: FMD InitializeFlash g_FMDInfo.BlockSize=40000 4294773819 PID:adf39802 TID:adf5bdf6 0x8df391b4: INFO: FMD_Init: Flash Address=0xa8000000 Length=0x2000000. 4294773820 PID:adf39802 TID:adf5bdf6 0x8df391b4: FMD_GetInfo: pFlashInfo->dwNumBlocks=80,pFlashInfo->dwBytesPerBlock=40000,pFlashInfo->wDataBytesPerSector=200,pFlashInfo->wSectorsPerBlock=1f8 4294773824 PID:adf39802 TID:adf5bdf6 0x8df391b4: FLASHDRV.DLL:BuildupMappingInfo() - Enter. 4294773834 PID:adf39802 TID:adf5bdf6 0x8df391b4: PNP interface class {A4E7EDDA-E575-4252-9D6B-4195D48BB865} (DSK1:) ATTACH 4294774125 PID:adf584ce TID:2df430aa 0x8df58000: >>> Loading module mspart.dll at address 0x03D10000-0x03D1B000 (RW data at 0x01FD7000-0x01FD74A4) Loaded symbols for 'C:\WINCE420\PUBLIC\CENET42_SIID\RELDIR\HITACHI_PFM-DS11_SH3DEBUG\MSPART.DLL' 4294774157 PID:adf584ce TID:2df430aa 0x8df58000: Loading partition driver mspart.dll hModule=8DE65C48 4294774159 PID:adf584ce TID:2df430aa 0x8df58000: Driver mspart.dll loaded 4294774160 PID:adf584ce TID:2df430aa 0x8df58000: Opened the store hStore=0008EB40 4294774161 PID:adf584ce TID:2df430aa 0x8df58000: NumSec=-1008 BytesPerSec=512 FreeSec=0 BiggestCreatable=0 4294777869 PID:de65692 TID:df397de 0x8de2b400: InitSharedHeap: 44000000 0 c 4294777869 PID:de65692 TID:df397de 0x8de2b400: InitSharedHeap: return 44000060 4294782634 PID:adf39802 TID:2df430aa 0x8df58000: FMD_EraseBlock PD_FormatPartition - type is 11 4294892156 PID:adf584ce TID:2df430aa 0x8df58000: NumSec=-1008 BytesPerSec=512 FreeSec=-282727629 BiggestCreatable=-1525897972 4294892157 PID:adf584ce TID:2df430aa 0x8df58000: Partition PART00 NumSectors=-1010 4294892157 PID:adf584ce TID:2df430aa 0x8df58000: MSPART!PD_OpenPartition: dwStoreId=0008EB40, PartName=PART00 4294892195 PID:adf584ce TID:2df430aa 0x8df58000: >>> Loading module fatfsd.dll at address 0x03EE0000-0x03F04000 (RW data at 0x01FF9000-0x01FF9674) Loaded symbols for 'C:\WINCE420\PUBLIC\CENET42_SIID\RELDIR\HITACHI_PFM-DS11_SH3DEBUG\FATFSD.DLL' 4294892237 PID:adf584ce TID:2df430aa 0x8df58000: FSD_MountDisk: mounting volumes for hDsk=0008FC30 4294892242 PID:adf584ce TID:2df430aa 0x8df58000: FATFS!OpenVolume: access time updates disabled 4294892242 PID:adf584ce TID:2df430aa 0x8df58000: FATFS!OpenVolume: event logging enabled 4294892243 PID:adf584ce TID:2df430aa 0x8df58000: FATFS!OpenVolume: automatic scanning disabled 4294892243 PID:adf584ce TID:2df430aa 0x8df58000: FATFS!OpenVolume: write verify disabled 4294892244 PID:adf584ce TID:2df430aa 0x8df58000: FATFS!OpenVolume: extra FAT on format disabled 4294892245 PID:adf584ce TID:2df430aa 0x8df58000: FATFS!OpenVolume: force write through enabled 4294892247 PID:adf584ce TID:2df430aa 0x8df58000: FATFS!OpenVolume: Codepage = 1 4294892249 PID:adf584ce TID:2df430aa 0x8df58000: FATFS!OpenVolume: Number of path cache entries = 50 4294892250 PID:adf584ce TID:2df430aa 0x8df58000: FATFS!InitVolume: sector 0 byte 0 suspicious (0xb) 4294892251 PID:adf584ce TID:2df430aa 0x8df58000: FATFS!InitVolume: invalid BPB, volume deemed invalid 4294892259 PID:adf584ce TID:2df430aa 0x8df58000: FATFS: Sec/FAT = 0!!! 4294892259 PID:adf584ce TID:2df430aa 0x8df58000: FATFS: CacheSize = 16!!! 4294892283 PID:adf584ce TID:2df430aa 0x8df58000: >>> Loading module fatutil.dll at address 0x03EC0000-0x03ED2000 (RW data at 0x01FF6000-0x01FF70C8) Loaded symbols for 'C:\WINCE420\PUBLIC\CENET42_SIID\RELDIR\HITACHI_PFM-DS11_SH3DEBUG\FATUTIL.DLL' 4294892319 PID:adf584ce TID:2df430aa 0x8df58000: FormatDisk!FormatVolume: New BPB successfully written 4294892322 PID:adf584ce TID:2df430aa 0x8df58000: FormatDisk!FormatVolume: New extended boot sector successfully written 84641 PID:adf39802 TID:2df430aa 0x8df58000: FLASHDRV.DLL:WriteToMedia() - request runs off end of media 84642 PID:adf39802 TID:2df430aa 0x8df58000: FLASHDRV.DLL:WriteToMedia() failed. 84642 PID:adf584ce TID:2df430aa 0x8df58000: Unknown: DEBUGCHK failed in file c:\wince420\public\common\oak\drivers\fsd\fatutil\main\diskinterface.cpp at line 44 Unloaded symbols for 'C:\WINCE420\PUBLIC\CENET42_SIID\RELDIR\HITACHI_PFM-DS11_SH3DEBUG\FATUTIL.DLL' 84645 PID:adf584ce TID:2df430aa 0x8df58000: FormatDisk!FormatVolume: cannot write new FAT sector 32 84648 PID:adf584ce TID:2df430aa 0x8df58000: <<< Unloading module fatutil.dll at address 0x03EC0000-0x03ED2000 (RW data at 0x01FF6000-0x01FF70C8) 84649 PID:adf584ce TID:2df430aa 0x8df58000: FATFS!CloseVolume: retaining volume 0x0008fe90 (following power cycle) 84652 PID:adf584ce TID:2df430aa 0x8df58000: FATFS!OpenVolume: access time updates disabled 84653 PID:adf584ce TID:2df430aa 0x8df58000: FATFS!OpenVolume: event logging enabled 84654 PID:adf584ce TID:2df430aa 0x8df58000: FATFS!OpenVolume: automatic scanning disabled 84654 PID:adf584ce TID:2df430aa 0x8df58000: FATFS!OpenVolume: write verify disabled 84655 PID:adf584ce TID:2df430aa 0x8df58000: FATFS!OpenVolume: extra FAT on format disabled 84656 PID:adf584ce TID:2df430aa 0x8df58000: FATFS!OpenVolume: force write through enabled 84658 PID:adf584ce TID:2df430aa 0x8df58000: FATFS!OpenVolume: Codepage = 1 84660 PID:adf584ce TID:2df430aa 0x8df58000: FATFS!OpenVolume: Number of path cache entries = 50 84661 PID:adf584ce TID:2df430aa 0x8df58000: FATFS!InitVolume: sector 0 byte 0 suspicious (0xb) 84662 PID:adf584ce TID:2df430aa 0x8df58000: FATFS!InitVolume: invalid BPB, volume deemed invalid 84670 PID:adf584ce TID:2df430aa 0x8df58000: FATFS: Sec/FAT = 0!!! 84670 PID:adf584ce TID:2df430aa 0x8df58000: FATFS: CacheSize = 16!!! 84676 PID:adf584ce TID:2df430aa 0x8df58000: FATFS!UnmountDisk: unmounting all volumes on disk 0008FC30 84678 PID:adf584ce TID:2df430aa 0x8df58000: FATFS!FATDetach complete (0 sectors written in 0 requests) 84679 PID:adf584ce TID:2df430aa 0x8df58000: <<< Unloading module fatfsd.dll at address 0x03EE0000-0x03F04000 (RW data at 0x01FF9000-0x01FF9674) Unloaded symbols for 'C:\WINCE420\PUBLIC\CENET42_SIID\RELDIR\HITACHI_PFM-DS11_SH3DEBUG\FATFSD.DLL' Debug output when i try manually to format/mount after it fails in startup (bank2) ============================================================================== 182039 PID:edc8bc4a TID:cdc8bbde 0x8dc75c1c: MSFLASH for STRATAFLASH 183026 PID:adf39802 TID:cdc8bbde 0x8dc75c1c:FMD_EraseBlock MSPART!PD_OpenPartition: dwStoreId=0008EB40, PartName=PART00 338189 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: >>> Loading module fatfsd.dll at address 0x03EE0000-0x03F04000 (RW data at 0x01FF9000-0x01FF9674) Loaded symbols for 'C:\WINCE420\PUBLIC\CENET42_SIID\RELDIR\HITACHI_PFM-DS11_SH3DEBUG\FATFSD.DLL' 338538 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FSD_MountDisk: mounting volumes for hDsk=0008F7D0 Loaded symbols for 'C:\WINCE420\PUBLIC\CENET42_SIID\RELDIR\HITACHI_PFM-DS11_SH3DEBUG\FATUTIL.DLL' 338539 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!MountDisk: BPB_HiddenSectors(1963221330) != 0 338542 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!OpenVolume: access time updates disabled 338542 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!OpenVolume: event logging enabled 338543 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!OpenVolume: automatic scanning disabled 338543 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!OpenVolume: write verify disabled 338543 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!OpenVolume: extra FAT on format disabled 338543 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!OpenVolume: force write through enabled 338545 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!OpenVolume: Codepage = 1 338565 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!OpenVolume: Number of path cache entries = 50 338566 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!InitVolume: sector 0 byte 0 suspicious (0xb) 338566 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!InitVolume: invalid BPB, volume deemed invalid 338574 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS: Sec/FAT = 0!!! 338575 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS: CacheSize = 16!!! 338599 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: >>> Loading module fatutil.dll at address 0x03EC0000-0x03ED2000 (RW data at 0x01FF6000-0x01FF70C8) 338949 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FormatDisk!FormatVolume: New BPB successfully written 338953 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FormatDisk!FormatVolume: New extended boot sector successfully written 500548 PID:adf39802 TID:cdc8bbde 0x8dc75c1c: FLASHDRV.DLL:WriteToMedia() - request runs off end of media 500549 PID:adf39802 TID:cdc8bbde 0x8dc75c1c: FLASHDRV.DLL:WriteToMedia() failed. 500549 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: Unknown: DEBUGCHK failed in file c:\wince420\public\common\oak\drivers\fsd\fatutil\main\diskinterface.cpp at line 44 Unloaded symbols for 'C:\WINCE420\PUBLIC\CENET42_SIID\RELDIR\HITACHI_PFM-DS11_SH3DEBUG\FATUTIL.DLL' 500552 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FormatDisk!FormatVolume: cannot write new FAT sector 32 500556 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: <<< Unloading module fatutil.dll at address 0x03EC0000-0x03ED2000 (RW data at 0x01FF6000-0x01FF70C8) 500556 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!CloseVolume: retaining volume 0x0008fcc0 (following power cycle) 500559 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!OpenVolume: access time updates disabled 500560 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!OpenVolume: event logging enabled Unloaded symbols for 'C:\WINCE420\PUBLIC\CENET42_SIID\RELDIR\HITACHI_PFM-DS11_SH3DEBUG\FATFSD.DLL' Loaded symbols for 'C:\WINCE420\PUBLIC\CENET42_SIID\RELDIR\HITACHI_PFM-DS11_SH3DEBUG\FATUTIL.DLL' 500560 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!OpenVolume: automatic scanning disabled 500560 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!OpenVolume: write verify disabled 500560 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!OpenVolume: extra FAT on format disabled 500560 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!OpenVolume: force write through enabled 500562 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!OpenVolume: Codepage = 1 500564 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!OpenVolume: Number of path cache entries = 50 500586 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!InitVolume: sector 0 byte 0 suspicious (0xb) 500587 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!InitVolume: invalid BPB, volume deemed invalid 500594 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS: Sec/FAT = 0!!! 500595 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS: CacheSize = 16!!! 500600 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!UnmountDisk: unmounting all volumes on disk 0008F7D0 Loaded symbols for 'C:\WINCE420\PUBLIC\CENET42_SIID\RELDIR\HITACHI_PFM-DS11_SH3DEBUG\FATFSD.DLL' 500601 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!FATDetach complete (0 sectors written in 0 requests) 500603 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: <<< Unloading module fatfsd.dll at address 0x03EE0000-0x03F04000 (RW data at 0x01FF9000-0x01FF9674) 500633 PID:de65692 TID:cdc8bbde 0x8dc75c1c: DlgMgr: FindDlgItem id 1 returning NULL. 505644 PID:de65692 TID:cdc8bbde 0x8dc75c1c: DlgMgr: FindDlgItem id 1 returning NULL. 505779 PID:de65692 TID:cdc8bbde 0x8dc75c1c: Grow Gdi handle table from 768 to 832 505801 PID:edc8bc4a TID:cdc8bbde 0x8dc75c1c: >>> Loading module fatutil.dll at address 0x03EC0000-0x03ED2000 (RW data at 0x01FF6000-0x01FF70C8) 507227 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: >>> Loading module fatfsd.dll at address 0x03EE0000-0x03F04000 (RW data at 0x01FF9000-0x01FF9674) 507546 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FSD_MountDisk: mounting volumes for hDsk=0008F7D0 507547 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!MountDisk: BPB_HiddenSectors(-971454952) != 0 507551 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!OpenVolume: access time updates disabled 507552 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!OpenVolume: event logging enabled 507552 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!OpenVolume: automatic scanning disabled 507552 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!OpenVolume: write verify disabled 507552 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!OpenVolume: extra FAT on format disabled 507553 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!OpenVolume: force write through enabled 507555 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!OpenVolume: Codepage = 1 507556 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!OpenVolume: Number of path cache entries = 50 507557 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!InitVolume: sector 0 byte 0 suspicious (0xb) 507576 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS!InitVolume: invalid BPB, volume deemed invalid 507584 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS: Sec/FAT = 0!!! 507584 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FATFS: CacheSize = 16!!! 507609 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FormatDisk!FormatVolume: New BPB successfully written 507612 PID:adf584ce TID:cdc8bbde 0x8dc75c1c: FormatDisk!FormatVolume: New extended boot sector successfully written 507698 PID:adf39802 TID:de745d2 0x8de740a8: SM_UnmarkSectorsAsDirty: Error, Invalid dirty sector count 507698 PID:adf39802 TID:de745d2 0x8de740a8: FLASHDRV.DLL:CP_CompactBlock() - Unable to unmark physical sector 0x000001f8 as DIRTY 507699 PID:adf39802 TID:de745d2 0x8de740a8: SM_UnmarkSectorsAsDirty: Error, Invalid dirty sector count .......................... FLASHDRV.DLL:CP_CompactBlock() - Unable to map logical sector 0x74042412 to physical sector 0x0000f810 508860 PID:adf39802 TID:de745d2 0x8de740a8: FLASHDRV.DLL:CP_GetNextCompactionBlock() Error: Cannot write to block 0! 508860 PID:adf39802 TID:de745d2 0x8de740a8: Unknown: DEBUGCHK failed in file d:\mckendric\private\winceos\drivers\msflash\src\compactor.c at line 818 508863 PID:adf39802 TID:de745d2 0x8de740a8: FLASHDRV.DLL:CompactorThread() - CompactorThread(0xffffffff) failed; unable to compact!!! debug output when i use bank1 and everything works fine (bank1) =================================================================== 4294778981 PID:4df584ce TID:4df430aa 0x8df58000: >>> Loading module mspart.dll at address 0x03D10000-0x03D1B000 (RW data at 0x01FD7000-0x01FD74A4) Loaded symbols for 'C:\WINCE420\PUBLIC\CENET42_SIID\RELDIR\HITACHI_PFM-DS11_SH3DEBUG\MSPART.DLL' 4294779030 PID:4df584ce TID:4df430aa 0x8df58000: Loading partition driver mspart.dll hModule=8DE65C90 4294779031 PID:4df584ce TID:4df430aa 0x8df58000: Driver mspart.dll loaded 4294779032 PID:4df584ce TID:4df430aa 0x8df58000: Opened the store hStore=0008E990 4294779034 PID:4df584ce TID:4df430aa 0x8df58000: NumSec=47880 BytesPerSec=512 FreeSec=0 BiggestCreatable=0 4294782487 PID:8df39802 TID:4df430aa 0x8df58000: FMD_EraseBlock ulBlockAddress=a01c0000, g_FMDInfo.BaseAddress =a0040000,blockID=6,g_FMDInfo.BlockSize=40000 4294856839 PID:4df584ce TID:4df430aa 0x8df58000: PD_FormatPartition - type is 4 4294856842 PID:4df584ce TID:4df430aa 0x8df58000: NumSec=47880 BytesPerSec=512 FreeSec=0 BiggestCreatable=0 4294856843 PID:4df584ce TID:4df430aa 0x8df58000: Partition PART00 NumSectors=47878 4294856844 PID:4df584ce TID:4df430aa 0x8df58000: MSPART!PD_OpenPartition: dwStoreId=0008E990, PartName=PART00 4294856882 PID:4df584ce TID:4df430aa 0x8df58000: >>> Loading module fatfsd.dll at address 0x03EE0000-0x03F04000 (RW data at 0x01FF9000-0x01FF9674) Loaded symbols for 'C:\WINCE420\PUBLIC\CENET42_SIID\RELDIR\HITACHI_PFM-DS11_SH3DEBUG\FATFSD.DLL' 4294856924 PID:4df584ce TID:4df430aa 0x8df58000: FSD_MountDisk: mounting volumes for hDsk=00090050 4294856928 PID:4df584ce TID:4df430aa 0x8df58000: FATFS!OpenVolume: access time updates disabled 4294856929 PID:4df584ce TID:4df430aa 0x8df58000: FATFS!OpenVolume: event logging enabled 4294856930 PID:4df584ce TID:4df430aa 0x8df58000: FATFS!OpenVolume: automatic scanning disabled 4294856930 PID:4df584ce TID:4df430aa 0x8df58000: FATFS!OpenVolume: write verify disabled 4294856931 PID:4df584ce TID:4df430aa 0x8df58000: FATFS!OpenVolume: extra FAT on format disabled 4294856931 PID:4df584ce TID:4df430aa 0x8df58000: FATFS!OpenVolume: force write through enabled 4294856934 PID:4df584ce TID:4df430aa 0x8df58000: FATFS!OpenVolume: Codepage = 1 4294856936 PID:4df584ce TID:4df430aa 0x8df58000: FATFS!OpenVolume: Number of path cache entries = 50 4294856937 PID:4df584ce TID:4df430aa 0x8df58000: FATFS!InitVolume: sector 0 byte 0 suspicious (0x0) 4294856938 PID:4df584ce TID:4df430aa 0x8df58000: FATFS!InitVolume: invalid BPB, volume deemed invalid 4294856946 PID:4df584ce TID:4df430aa 0x8df58000: FATFS: Sec/FAT = 0!!! 4294856946 PID:4df584ce TID:4df430aa 0x8df58000: FATFS: CacheSize = 16!!! 4294856970 PID:4df584ce TID:4df430aa 0x8df58000: >>> Loading module fatutil.dll at address 0x03EC0000-0x03ED2000 (RW data at 0x01FF6000-0x01FF70C8) Loaded symbols for 'C:\WINCE420\PUBLIC\CENET42_SIID\RELDIR\HITACHI_PFM-DS11_SH3DEBUG\FATUTIL.DLL' 4294857012 PID:4df584ce TID:4df430aa 0x8df58000: FormatDisk!FormatVolume: New BPB successfully written 4294857083 PID:4df584ce TID:4df430aa 0x8df58000: FormatDisk!FormatVolume: New FAT #0 successfully written 4294857153 PID:4df584ce TID:4df430aa 0x8df58000: FormatDisk!FormatVolume: New FAT #1 successfully written 4294857202 PID:4df584ce TID:4df430aa 0x8df58000: FormatDisk!FormatVolume: New root directory successfully written 4294857202 PID:4df584ce TID:4df430aa 0x8df58000: FormatDisk!FormatVolume complete. 4294857206 PID:4df584ce TID:4df430aa 0x8df58000: <<< Unloading module fatutil.dll at address 0x03EC0000-0x03ED2000 (RW data at 0x01FF6000-0x01FF70C8) Unloaded symbols for 'C:\WINCE420\PUBLIC\CENET42_SIID\RELDIR\HITACHI_PFM-DS11_SH3DEBUG\FATUTIL.DLL' 4294857206 PID:4df584ce TID:4df430aa 0x8df58000: FATFS!CloseVolume: retaining volume 0x00090540 (following power cycle) 4294857210 PID:4df584ce TID:4df430aa 0x8df58000: FATFS!OpenVolume: access time updates disabled 4294857210 PID:4df584ce TID:4df430aa 0x8df58000: FATFS!OpenVolume: event logging enabled 4294857211 PID:4df584ce TID:4df430aa 0x8df58000: FATFS!OpenVolume: automatic scanning disabled 4294857211 PID:4df584ce TID:4df430aa 0x8df58000: FATFS!OpenVolume: write verify disabled 4294857212 PID:4df584ce TID:4df430aa 0x8df58000: FATFS!OpenVolume: extra FAT on format disabled 4294857212 PID:4df584ce TID:4df430aa 0x8df58000: FATFS!OpenVolume: force write through enabled 4294857215 PID:4df584ce TID:4df430aa 0x8df58000: FATFS!OpenVolume: Codepage = 1 4294857217 PID:4df584ce TID:4df430aa 0x8df58000: FATFS!OpenVolume: Number of path cache entries = 50 4294857225 PID:4df584ce TID:4df430aa 0x8df58000: FATFS: Sec/FAT = 47!!! 4294857226 PID:4df584ce TID:4df430aa 0x8df58000: FATFS: CacheSize = 32!!! 4294857241 PID:8df39802 TID:6df0c56e 0x8def175c: TAPI:AddTapiDevice: GetDeviceKeys(\NOR Flash) returned 1200 4294857245 PID:8df39802 TID:6df0c56e 0x8def175c: TAPI:OldAddTapiDevice RegQueryValueEx(Tsp) returned 87 Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71664
  - 25
    - Hive based Registry System bootup hangs Hi, I am using Hive Based Registry for PXA255 Platform winCE 4.2 When i load the system after inlcuding my Hive Registry it hangs waiting for "FILESYS: Starting device and waiting for boot file system." I couldn't find the regsitry entry which affects this, please suggest. Thanks, Peter This is the debg mesg i got: Loaded symbols for 'E:\WINCE420\PUBLIC\POWER_TS90BSP_TEST\RELDIR\TS90DEBUG\COREDLL.DLL' 4294770480 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: >>> Loading module filesys.exe at address 0x04010000-0x0408C000 Loaded symbols for 'E:\WINCE420\PUBLIC\POWER_TS90BSP_TEST\RELDIR\TS90DEBUG\FILESYS.EXE' 4294770543 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: FileSystem Starting - starting with clean file system 4294770592 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: FSVOL: Opening existing volume 4294770623 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: FSVOL: Volume heap already initialized 4294770653 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: FSREG: Mounted ROM portion of boot registry 4294770683 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: FSVOL: Creating clean virtual volume 4294770713 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: FSVOL: Initializing volume heap 4294770779 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: FSREG: Mounted RAM portion of boot registry 4294770837 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: FS: Creating signal event SYSTEM/PowerManagerReady 4294770870 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: FS: Creating signal event SYSTEM/GweApiSetReady 4294770902 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: FS: Creating signal event ReleaseFSD 4294770944 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: FSREG: Unable to read value "Flags" under HKEY_LOCAL_MACHINE\init\BootVars 4294770983 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: FILESYS: Starting storage manager and waiting for boot file system. 4294771042 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: >>> Loading module fsdmgr.dll at address 0x03D60000-0x03D7C000 (RW data at 0x01FE5000-0x01FE5754) Loaded symbols for 'E:\WINCE420\PUBLIC\POWER_TS90BSP_TEST\RELDIR\TS90DEBUG\FSDMGR.DLL' 4294771090 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: FS: Registering file system StoreMgr, index 2, flags 0x00000001 4294771134 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: FILESYS: Starting storage manager and waiting for boot file system. 4294771192 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: >>> Loading module stratad.dll at address 0x035C0000-0x035D4000 (RW data at 0x01F80000-0x01F80AF4) Loaded symbols for 'E:\WINCE420\PUBLIC\POWER_TS90BSP_TEST\RELDIR\TS90DEBUG\STRATAD.DLL' 4294771241 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: FMD_Init: SUCCESS 4294771269 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: INFO: FMD_Init: Flash Address=0xb8380000 Length=0x1f80000. 4294771308 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: FLASHDRV.DLL:BuildupMappingInfo() - Enter. 4294771373 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: >>> Loading module mspart.dll at address 0x03D50000-0x03D5C000 (RW data at 0x01FE3000-0x01FE34A4) Loaded symbols for 'E:\WINCE420\PUBLIC\POWER_TS90BSP_TEST\RELDIR\TS90DEBUG\MSPART.DLL' 4294771421 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: Loading partition driver mspart.dll hModule=83C69490 4294772949 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: Driver mspart.dll loaded 4294773324 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: FLASHDRV.DLL:L2P_GetPhysicalSectorAddr() - Secondary table doesn't exist for logical sector 0x0!!! 4294773407 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: FLASHDRV.DLL:ReadFromMedia() - Unable to determine physical sector address for logical sector 0x00000000 4294774483 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: Opened the store hStore=000A34E0 4294775324 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: FLASHDRV.DLL:L2P_GetPhysicalSectorAddr() - Secondary table doesn't exist for logical sector 0x0!!! 4294775407 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: FLASHDRV.DLL:ReadFromMedia() - Unable to determine physical sector address for logical sector 0x00000000 4294776519 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: NumSec=62496 BytesPerSec=512 FreeSec=0 BiggestCreatable=0 4294777342 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: >>> Loading module relfsd.dll at address 0x03EA0000-0x03EAB000 (RW data at 0x01FF4000-0x01FF4ABC) Loaded symbols for 'E:\WINCE420\PUBLIC\POWER_TS90BSP_TEST\RELDIR\TS90DEBUG\RELFSD.DLL' 4294777433 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: FILESYS: Starting device and waiting for boot file system. 4294777495 PID:83ca3b46 TID:63c7119a 0x83c69ce0: FS: Registering file system Release, index 3, flags 0x00000000 4294777535 PID:83ca3b46 TID:63c7119a 0x83c69ce0: Mounted ReleaseFSD volume '\Release' 4294777617 PID:43c632f6 TID:43c69402 0x83c630b8: >>> Loading module pm.dll at address 0x03F00000-0x03F1E000 (RW data at 0x01FFB000-0x01FFB6C4) Loaded symbols for 'E:\WINCE420\PUBLIC\POWER_TS90BSP_TEST\RELDIR\TS90DEBUG\PM.DLL' 4294778274 PID:43c632f6 TID:43c69402 0x83c630b8: *** Power Manager: DLL_PROCESS_ATTACH - Current Process: 0x42, ID: 0x43c632f6 *** 4294778319 PID:43c632f6 TID:43c69402 0x83c630b8: >>> Loading module device.exe at address 0x06010000-0x06020000 Loaded symbols for 'E:\WINCE420\PUBLIC\POWER_TS90BSP_TEST\RELDIR\TS90DEBUG\DEVICE.EXE' 4294778458 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: FS: Waiting for device to signal BootPhase1 completion 4294780052 PID:43c632f6 TID:43c69402 0x83c630b8: >>> Loading module ceddk.dll at address 0x03D40000-0x03D46000 (RW data at 0x01FE1000-0x01FE1068) Loaded symbols for 'E:\WINCE420\PUBLIC\POWER_TS90BSP_TEST\RELDIR\TS90DEBUG\CEDDK.DLL' 4294780099 PID:43c632f6 TID:43c69402 0x83c630b8: Ceddk!CalibrateStallCounter: Enter 4294780137 PID:43c632f6 TID:43c69402 0x83c630b8: Ceddk!CalibrateStallCounter: Could not find stall counter 4294780198 PID:43c632f6 TID:43c69402 0x83c630b8: Ceddk!BeginCalibration: min(368) max(460) 4294781576 PID:43c632f6 TID:43c69402 0x83c630b8: Ceddk!BeginCalibration: elapsed is 386 4294782164 PID:43c632f6 TID:43c69402 0x83c630b8: Ceddk!BeginCalibration: delay is 3 4294782215 PID:43c632f6 TID:43c69402 0x83c630b8: +Harita PmInit 4294783583 PID:43c632f6 TID:43c69402 0x83c630b8: +Harita PlatformValidatePMRegistry 4294784166 PID:43c632f6 TID:43c69402 0x83c630b8: -Harita PlatformValidatePMRegistry: returning 0 4294784223 PID:43c632f6 TID:43c69402 0x83c630b8: DeviceListsInit: default GUID found in registry as expected 4294785606 PID:43c632f6 TID:43c69402 0x83c630b8: DeviceListCreate: creating list entry for class 8dd679ce-8ab4-43c8-a14a-ea4963faa715 4294786166 PID:43c632f6 TID:43c69402 0x83c630b8: Harita PlatformDeviceListInit: using stream interface to access class 8dd679ce-8ab4-43c8-a14a-ea4963faa715 4294786253 PID:43c632f6 TID:43c69402 0x83c630b8: DeviceListCreate: creating list entry for class 98c5250d-c29a-4985-ae5f-afe5367e5006 4294787636 PID:43c632f6 TID:43c69402 0x83c630b8: Harita PlatformDeviceListInit: using stream interface to access class 98c5250d-c29a-4985-ae5f-afe5367e5006 4294788165 PID:43c632f6 TID:43c69402 0x83c630b8: DeviceListCreate: creating list entry for class eb91c7c9-8bf6-4a2d-9ab8-69724eed97d1 4294788242 PID:43c632f6 TID:43c69402 0x83c630b8: Harita PlatformDeviceListInit: using display interface to access class eb91c7c9-8bf6-4a2d-9ab8-69724eed97d1 4294789673 PID:43c632f6 TID:43c69402 0x83c630b8: InitDisplayDeviceInterface: returning 1 4294790166 PID:43c632f6 TID:43c69402 0x83c630b8: DeviceListCreate: creating list entry for class a32942b7-920c-486b-b0e6-92a702a99b35 4294790243 PID:43c632f6 TID:43c69402 0x83c630b8: Harita PlatformDeviceListInit: using stream interface to access class a32942b7-920c-486b-b0e6-92a702a99b35 4294791709 PID:43c632f6 TID:a3c53176 0x83c69ce0: +PnpThreadProc: thread 0xa3c53176 4294791809 PID:43c632f6 TID:a3c537d6 0x83c53598: +ResumeThreadProc: thread 0xa3c537d6 4294791909 PID:43c632f6 TID:a3c53e36 0x83c53bf8: +ActivityTimersThreadProc: thread 0xa3c53e36 4294792170 PID:43c632f6 TID:a3c53e36 0x83c53bf8: ActivityTimerCreate: ActivityTimerCreate('UserActivity') returning 0x00000000 4294792244 PID:43c632f6 TID:a3c53e36 0x83c53bf8: ActivityTimerCreate: ActivityTimerCreate('SystemActivity') returning 0x00000000 4294793740 PID:43c632f6 TID:43c53e5a 0x83c4c000: +SystemThreadProc: thread 0x43c53e5a 4294794166 PID:43c632f6 TID:43c53e5a 0x83c4c000: +Harita PlatformManageSystemPower 4294794218 PID:43c632f6 TID:43c53e5a 0x83c4c000: Harita PlatformPMActivelyManagesPower: returning 1 4294795268 PID:43c632f6 TID:43c53e5a 0x83c4c000: Harita PlatformManageSystemPower: waiting for initialization to complete 4294796166 PID:43c632f6 TID:23c53f32 0x83c4c67c: +BatteryMonitorThreadProc: thread 0x23c53f32 4294796223 PID:43c632f6 TID:23c53f32 0x83c4c67c: BatteryMonitorThreadProc: battery interface APIs not available, exiting 4294796265 PID:43c632f6 TID:43c69402 0x83c630b8: -Harita PmInit: returning 1 4294798168 PID:43c632f6 TID:43c53e5a 0x83c4c000: Harita PlatformManageSystemPower: initialization complete 4294799357 PID:43c632f6 TID:43c53e5a 0x83c4c000: Harita PlatformManageSystemPower: read the timeout values 4294800849 PID:43c632f6 TID:43c53e5a 0x83c4c000: Harita PlatformLoadTimeouts: ACUserIdle 900000, ACSystemIdle 300000, ACSuspend -1, BattUserIdle 900000, BattSystemIdle 180000, BattSuspend 300000 4294802166 PID:43c632f6 TID:43c53e5a 0x83c4c000: Harita PlatformManageSystemPower: timeout values read 4294803399 PID:43c632f6 TID:43c53e5a 0x83c4c000: Harita PlatformManageSystemPower: waiting for events 4294804891 PID:43c632f6 TID:43c53e5a 0x83c4c000: Harita PlatformManageSystemPower: ##### wait returned 4, elapsed time 0, timeout was -1 ##### 4294806166 PID:43c632f6 TID:43c53e5a 0x83c4c000: Harita PlatformManageSystemPower: UserInactivity 4294807440 PID:43c632f6 TID:43c53e5a 0x83c4c000: Harita PlatformUpdateSystemPowerState: activity 'UserInactivity' in state 'UserActive', elapsed time 0 4294808945 PID:43c632f6 TID:43c53e5a 0x83c4c000: Harita PlatformUpdateSystemPowerState: we're on AC power 4294810166 PID:43c632f6 TID:43c53e5a 0x83c4c000: Harita PlatformUpdateSystemPowerState: a timeout 4294811494 PID:43c632f6 TID:43c53e5a 0x83c4c000: Harita PlatformUpdateSystemPowerState:UserActive -> UserInactive 4294812989 PID:43c632f6 TID:43c53e5a 0x83c4c000: Harita PlatformUpdateSystemPowerState:changing activity states 4294814166 PID:43c632f6 TID:43c53e5a 0x83c4c000: Harita PlatformUpdateSystemPowerState:calculate new timeouts and system power state names 4294815560 PID:43c632f6 TID:43c53e5a 0x83c4c000: Harita PlatformUpdateSystemPowerState:UserInactive = on 4294817041 PID:43c632f6 TID:43c53e5a 0x83c4c000: Harita PlatformUpdateSystemPowerState: entering activity state 'UserInactive', state time left 900000 4294818167 PID:43c632f6 TID:43c69402 0x83c630b8: DEVICE!DevloadInit 4294819576 PID:43c632f6 TID:43c69402 0x83c630b8: DEVICE!InitDevices: Root Key is Drivers\BuiltIn. 4294821074 PID:43c632f6 TID:23c53f32 0x83c4c67c: -BatteryMonitorThreadProc: exiting 4294822167 PID:43c632f6 TID:43c69402 0x83c630b8: DEVICE!ActivateDeviceEx(Drivers\BuiltIn) entered 4294823637 PID:43c632f6 TID:43c69402 0x83c630b8: >>> Loading module regenum.dll at address 0x03F20000-0x03F27000 (RW data at 0x01FFD000-0x01FFD4A4) Loaded symbols for 'E:\WINCE420\PUBLIC\POWER_TS90BSP_TEST\RELDIR\TS90DEBUG\REGENUM.DLL' 4294825743 PID:43c632f6 TID:43c69402 0x83c630b8: DEVICE!ActivateDeviceEx(Drivers\BuiltIn\StrataFMD) entered 4294825784 PID:83ca3b46 TID:83ca3b22 0x83ca38e4: FILESYS: Starting device and waiting for boot file system. Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71603
- Next
  - 1
    - Xscale...Ping Problem Hi I have come across a rather odd problem with our new hardware. Our old hardware is StrongARM (SA1110) based and the new is Xscale (PXA255) based. I can use bot sets of hardware to ping. We have another site where we can use both set of hardware to ping.Bt we have a problem site where the SA1110 based hardware pings without any issue, but the Xscale based hardware will not ping, fails all the time. We are using the same kit at all three sites...using the ciscoaironet350 cards.. Any ideas anyone. Regards Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71587
  - 2
    - PXA255 USB device controller GetStatus Hi, We have a design using a PXA255 where we need the USB device controller (Serial function). The serial function seems to be working OK. But when we tried to pass certification for Microsoft drivers signing we found, that in some cases the UDC does not answer the Get Status from the host (The answer is 0 bytes instead of 2 Bytes). This happens only 'sporadically'. We fail the test in 5 out of 6 tries. According to the manual and our debugging, the Get Status is handled by the PXA and does not generate an interrupt. I.E. I don't know how I can fix that in my driver. Test setup: HCT test bench from Microsoft using an USB 2.0 EHC controller with a USB 2.0 hub. (As required by the test bench) Win CE using PB 4.2 Any help would be appreciated. P.S. the 0x81 bug (missing OPR) is fixed. Regards, Martin Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71585
  - 3
    - How to include a CSP Hi, I have to create a new CE 5.0 BSP using PB 5.0 for ARM processor, I have the seperate ARM CSP library(Source) which has the device driver support files in arm directory. How should I include those file to make a BSP. Can u let me know the steps in interfacing these two. Thanx. Regards, John Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71584
  - 4
    - registry Hi, We are using vortex86 processor, 64 Mb DiskOnChip and 64 Mb RAM. We are developing an application with MFC on Embedded Visual C++. We have three main problems: 1) The application should run on start-up even before the desktop comes onto the screen. How do we change the registry so that the application runs on start-up? 2) Is there an easy way to load NK.bin image file to DiskOnChip? Our embedded system has an IP. We want to load it through the network. 3) We hold the database in DiskOnChip. But it is very slow to read, seek, and write from database. How can we make it fast? Thanks, Alper & Tolga Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71581
  - 5
    - stupid arm asm question xscale 27x that is. if pc is Axxxxxxx, then it is RAM. if it is 0xxxxxxx, that it is ROM. so, i have two case. if the code is running in ram already, don't init sdram. if it is in rom, then init ram. simple enough? but i couldn't get it work :( mov r1, pc tst r1, #0xA0000000 bne skip_mem_init bl xlli_mem_init skip_mem_init something follow.... Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71567
  - 6
    - Hive Based Registry Verification Procedure I am working in a WinCE 4.2 PXA255 product. It has 64MB SDRAM, 32MB Flash. I use Intel Strata Flash chips. Here, I am not using any third party file system. So, I added storage manager from the Catalog. I made modifications in the platform.reg file to load the Starata.dll, MSPART.dll. Here, I want to store my system.hv in the same flash chip itself. I downloaded the image and saw the mspart.dll and strata.dll is loaded without any errors. To verify Hive based registry, I created a new Registry Key. Then, I called the RegFlushKey () function to verify my Persistent Storage. After calling this function I restarted my product and looked for the key which I created and it was not there. So, the registry is not persistent. Or my way of verification is wrong? I don;t think my Persistent storage is working. I followed the procedures to include Hive in PB Help. I am sending my reg. file and bib file here. BIB FILE: MODULES mspart.dll $(_FLATRELEASEDIR)\mspart.dll NK SH ; StrataFlash block driver. stratad.dll $(_FLATRELEASEDIR)\stratad.dll NK SH REG FILE: ; HIVE BOOT SECTION [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles] "AutoMount"=dword:1 "AutoPart"=dword:0 "AutoFormat"=dword:0 "MountFlags"=dword:0 "DefaultFileSystem"="" "PartitionDriver"="mspart.dll" "Folder"=LOC_STORE_DEFAULT_FOLDER ; @CESYSGEN IF PM_PM_DEFAULT_PDD "ActivityEvent"="PowerManager/ActivityTimer/SystemActivity" ; @CESYSGEN ENDIF ; PM_PM_DEFAULT_PDD ; The partition table contain entries where the volume name is the partition type (in %02X format) ; The value is the name of the filesystem. This is used to look up the module to load etc. ; Explicitly call out 07 partition type as NTFS as an expample of another partition type ; Since there is no actual NTFS registry entry, no fileysstem will get loaded [HKEY_LOCAL_MACHINE\System\StorageManager\PartitionTable] "01"="FATFS" "04"="FATFS" "06"="FATFS" "07"="NTFS" "0B"="FATFS" "0C"="FATFS" "0E"="FATFS" "0F"="FATFS" "20"="BOOT" "21"="BINFS" "22"="XIP" ; StrataFlash block driver. #include "$(DRIVERS_DIR)\block\msflashfmd\strata\stratad\stratad.reg" [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\StrataFMD] "MemBase"=dword:b8380000 "MemLen"=dword:01f80000 ; END HIVE BOOT SECTION ; @CESYSGEN IF FILESYS_FSREGHIVE ; HIVE BOOT SECTION [HKEY_LOCAL_MACHINE\init\BootVars] "SYSTEMHIVE"="Documents and Settings\\system.hv" "PROFILEDIR"="Documents and Settings" "Start DevMgr"=dword:0 ; END HIVE BOOT SECTION ; @CESYSGEN ENDIF FILESYS_FSREGHIVE ; HIVE BOOT SECTION [HKEY_LOCAL_MACHINE\Drivers\Resources\IRQ] "Identifier"=dword:1 "Minimum"=dword:1 "Space"=dword:20 "Ranges"="1-0x20" ; "Shared"="" [HKEY_LOCAL_MACHINE\Drivers\Resources\IO] "Identifier"=dword:2 "Minimum"=dword:0 "Space"=dword:10000 "Ranges"="0-0xFFFF" ; END HIVE BOOT SECTION Please suggets me what i am missing inthe Hive configruations. Thanks & Regards, Peter Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71565
  - 7
    - Hive Based registry Verification Procedure ? I am working in a WinCE 4.2 PXA255 product. It has 64MB SDRAM, 32MB Flash. I use Intel Strata Flash chips. Here, I am not using any third party file system. So, I added storage manager from the Catalog. I made modifications in the platform.reg file to load the Starata.dll, MSPART.dll. Here, I want to store my system.hv in the same flash chip itself. I downloaded the image and saw the mspart.dll and strata.dll is loaded without any errors. To verify Hive based registry, I created a new Registry Key. Then, I called the RegFlushKey () function to verify my Persistent Storage. After calling this function I restarted my product and looked for the key which I created and it was not there. So, the registry is not persistent. Or my way of verification is wrong? I am putting my reg. file and bib file here. BIB FILE: MODULES mspart.dll $(_FLATRELEASEDIR)\mspart.dll NK SH ; StrataFlash block driver. stratad.dll $(_FLATRELEASEDIR)\stratad.dll NK SH REG FILE: ; HIVE BOOT SECTION [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles] "AutoMount"=dword:1 "AutoPart"=dword:0 "AutoFormat"=dword:0 "MountFlags"=dword:0 "DefaultFileSystem"="" "PartitionDriver"="mspart.dll" "Folder"=LOC_STORE_DEFAULT_FOLDER ; @CESYSGEN IF PM_PM_DEFAULT_PDD "ActivityEvent"="PowerManager/ActivityTimer/SystemActivity" ; @CESYSGEN ENDIF ; PM_PM_DEFAULT_PDD ; The partition table contain entries where the volume name is the partition type (in %02X format) ; The value is the name of the filesystem. This is used to look up the module to load etc. ; Explicitly call out 07 partition type as NTFS as an expample of another partition type ; Since there is no actual NTFS registry entry, no fileysstem will get loaded [HKEY_LOCAL_MACHINE\System\StorageManager\PartitionTable] "01"="FATFS" "04"="FATFS" "06"="FATFS" "07"="NTFS" "0B"="FATFS" "0C"="FATFS" "0E"="FATFS" "0F"="FATFS" "20"="BOOT" "21"="BINFS" "22"="XIP" ; StrataFlash block driver. #include "$(DRIVERS_DIR)\block\msflashfmd\strata\stratad\stratad.reg" [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\StrataFMD] "MemBase"=dword:b8380000 "MemLen"=dword:01f80000 ; END HIVE BOOT SECTION ; @CESYSGEN IF FILESYS_FSREGHIVE ; HIVE BOOT SECTION [HKEY_LOCAL_MACHINE\init\BootVars] "SYSTEMHIVE"="Documents and Settings\\system.hv" "PROFILEDIR"="Documents and Settings" "Start DevMgr"=dword:0 ; END HIVE BOOT SECTION ; @CESYSGEN ENDIF FILESYS_FSREGHIVE ; HIVE BOOT SECTION [HKEY_LOCAL_MACHINE\Drivers\Resources\IRQ] "Identifier"=dword:1 "Minimum"=dword:1 "Space"=dword:20 "Ranges"="1-0x20" ; "Shared"="" [HKEY_LOCAL_MACHINE\Drivers\Resources\IO] "Identifier"=dword:2 "Minimum"=dword:0 "Space"=dword:10000 "Ranges"="0-0xFFFF" ; END HIVE BOOT SECTION Please suggest me. Thansk & regards, Peter Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71564
  - 8
    - CE 5.0 Make New Connection problem in release, workaround Hi! I'm using CE 5.0 and a Intel IXC1100 (ARMV4I). I've encountered a problem that all connection types are grayed out when trying to make a new connection in "Network and Dial-up Connections". It started when I mounted the File system as root and shadowed the Windows directory, but only in release build. When I used debug version of Unimodem.dll in release build and enabled debug printouts via a serial port, the problem disappeared. If I set the "Order" value to 3 or greater for the serial drivers it works with the correct version of Unimodem.dll. Has anyone an explanation to this? GÃ¶ran Nordin Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71562
  - 9
    - Howto connect WinCE5 to a WinXP lan Hi, I wonder if is possible and how to connect WinCE5 to a WinXP lan. Or connect a WinXP PC to a WinCE device sharing a directory folder. Is it possible ? How ? TIA --Shutruk Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71560
  - 10
    - Question on CEC File ( Need defconfig equalent )?? Hi, I am a newbie in Windows CE world!, I want to make a CEC file such that when I select the platfom all the drivers required for that platfrom must be build with out selecting from catalog? How do I do this. I am using Windows CE 4.2 I went through documentation, I am able to build CEC file and pull components from catalog. However I want to select these drivers by default with platform How do I do this. -- Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71557
  - 11
    - In my Build All process, It can not generate .dio file! why? I had changed files in platform\Files dir and placed bootloader dir! Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71555
  - 12
    - problem with my packet IME I build a image with packet IME of Chinese(Simplified),It work right in notebook or other aplication's edit.But when I type Chinese in IE,It will input double .For example,select one word as "ºº"£¬but in the web page¡®s edit £¬it show ¡°ºººº¡±¡£ Can anyone help me? Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71554
  - 13
    - partial debug and retail image build Hello All, My OS run-image (Nk.nb0) is exceeding the space that is allocated for the image in config.bib during debug builds. I am left with following options to bring down my image size. 1)Make the build configuration smaller by removing unnecessary features. I have already done it and still image size is more. 2)I only want to debug certain components, rest of the components can be in built in retail mode . So i want to make debug versions of only components that need to be debugged. Is there any good way for doing thing? 3) Are there any other methods to bring down the OS image size? Thanks in advance, A. Thirupathi Reddy Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71546
  - 14
    - Manual startup sever with TCP/IP Hi, I am trying to get eVC to connect to my CE device with manual startup server and TCP/IP as the transport. CESH with KITL works (need PB for this though) . I assume my tcp/ip driver is ok as KITL must be using as underlying transport. I have checked the relevant files and cemgrc are on my device. I type in the command cemgrc.exe /t:tcpipc.dll etc but device does not connect. Also i've tried telneting to my device but can't, so it makes me wonder if there is a problem with the transport, but if this is the case there would be problem with KITL surely. Regards ms Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71481
  - 15
    - PC/PDA USB transmission question ? Dear all: Lately, I'm programming the USB Tx/Rx program between PC(winXP) and PDA(ce.net). On the PC side, the program, named PCUSB, uses WriteFile() to Tx bytes. On the PDA side, the program, named CEUSB, uses ReadFile() to Rx bytes. But I have belowing problem: Status 1: If PCUSB WriteFile( usbHandle, Buffer, 1000,.. ), CEUSB would Rx 1000 bytes. Status 2: If PCUSB WriteFile( usbHandle, Buffer, 4000,.. ), CEUSB would Rx 2047 bytes. Status 3: If PCUSB WriteFile( usbHandle, Buffer, 8000,.. ), CEUSB would Rx 2047 bytes. Status 4: If PCUSB WriteFile( usbHandle, Buffer, 2000,.. ) Sleep( 1 ); WriteFile( usbHandle, Buffer, 2000,.. ), CEUSB could Rx 4000 bytes. The problem looks like the PCUSB can Tx (SIZE<2048) bytes each. Why? pc usb buffer only 2048 ? or Set Commucation TimeOut Error? Both side, I set the commTimeOut: ReadIntervalTimeOut = MAXDWORD; ReadTimeoutConst,ReadTimeoutMultipler,WriteTimeoutConst,WriteTimeoutMultipler are all zero. Please give me a hand,thx. Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71474
  - 16
    - PC connection without file converters? How to install only the the connectivity part of activesync? I need this for debugging programs on the CE device. Full ActiveSync setup installs all the WinCE file types, Outlook and office plugins, and other stuff I don't want on my XP machine. Regards, --PA Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71463
  - 17
    - force SNMP restart Hi all, is there a way to force from code (eVC++) the SNMP service to restart? (I mean without rebooting the system) I'm working on Windows CE 5.0 Thanks for any suggestions, bye. /Morix Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71456
  - 18
    - PCL Printing in WinCE5 Hi, I've added the PCL lib to my platform fromt he catalog an downlooaded the image. When i plug in the USB printer (HP PCL3 compatable) i get a windows popup with 'unreconised usb device' title asking for the usb driver for this device. The usb mouse and keyboard still work fine. since the printer is PCL3 compatable (HP6122 inkjet), i assumed that it would be reconised. What am i missing here? Do i need to add somthing into platform.reg ? Please help... joe Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71449
  - 19
    - No RTTI in SDK? When I export an SDK for EVC4 from my CE 5.0 platform, the RTTI library is not being automatically included (in the same way that it wasn't in the Pocket PC 2003 SDK). Is this a bug in the SDK builder that they didn't fix for CE 5.0 or am I missing some option somewhere? I can always add the ccrtrtti.lib/pdb from WINCE500\PUBLIC\COMMON\OAK\LIB\ARMV4I\RETAIL explicitly into my SDK but it seems odd that I should have to. Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71448
  - 20
    - Repllog without dialog Hi, we have a problem with ActiveSync when connecting to PC. Connection with PC is made using ActiveSync via local network. Connection is established by "repllog.exe" program with parameter designating this type of connection "repllog.exe /remote", but this program displays a dialog for select connection type and host PC name. Is there any possibility to run it without displaying this dialog box? Or is there any other option, how to make ActiveSync connection via network? Between PDA and PC was already established a partnership (and it is the only partneship used by this PDA and we always want use this one). Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71442
  - 21
    - USBFN storage device Hi all, I have some problems in getting the USBFN storage working on my target. I want that my device appears as storage device on a PC. When I attach the device the USBFN storage driver tried to access the DSK1: on my Windows CE device. As I do not have that device the CreateFile() fails and is stops the initialisation of the USBFN storage driver. \Wince500\public\common\oak\driver\usbfn\class\storage\emulation\Scsi2\block .cpp What do I need to add to my kernel to get this running? I have included Mass Storage and USBFN driver. I use Windows CE V5.0 for an ARM platform. Thanks for any advice. Mike Engel Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71438
  - 22
    - Can I write data into specific block of SD card on Wince500 platform? Hi: I have a SD interface hardware, it is not only a SD card, so we can use the standard SD driver provided by MS, but also a sensor. It has two chipsets NAND flash on it .One is on the low 256MB, the other is on high 256MB. I wonder if I can send SD command using API function to the high 256MB flash ? Please guide me how to do that . Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71432
  - 23
    - Problem about debug eboot on Smdk2410 I want to modify my eboot and debug with pb like debug nk,when my test eboot is same with the eboot on my flash I can download and run it correctly ,however ,when I modify the eboot code and it cannot download correctly,each time it abouted after downloading 26.7kb Could any one help me ? And give me some advice on how to debug eboot. thank you Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71431
  - 24
    - re: ADOCE You will find the answer here: http://blogs.msdn.com/sloh/archive/category/5374.aspx Cheers, Sue sloh@microsoft.com (remove "online" from reply-to address) Now writing to a different blog! http://blogs.msdn.com/ce_base/ _____________________________________________________________ This posting is provided "AS IS" with no warranties, and confers no rights. _____________________________________________________________ Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71416
  - 25
    - issue is coming when migrate the OS design from WinCE 4.2 to WinCE hi, i'm using WinCE 5.0 Evaluation version for migrate the OS from WinCE 4.2 to WinCE 5.0 .Now i'm following the MSDN migration steps,currently i'm migrating only the OS design not adding the project code,after i build the design,it is not creating the _setEnv.bat file in the folder ? why so ?(eg:c:\winceroot\pbworkspace\osdesign\osdesign_SetEnv.bat) it should create batch file based on the OS design it is not happening !!!! Also some environment variables used in the WinCE 4.2 is not availble in the WinCE 5.0,for that what i do ? it makes any change in _setEnv.bat ? Please give a suggestion!! thank you bobie Tag: Problem with ActiveSync Partnership using 2 LAN connections Tag: 71403

Hello,

on my desktop PC I am using two LAN cards. If I try to create an
ActiveSync connection over Ethernet with my CE-Device (x86, CE 5.0)
ActiveSync connects always as GUEST and the connection does not work
properly.

(I have no troubles to use ActiveSync over Ethernet if I use my second
desktop PC which is equipped with only one network card).

Are there known troubles with ActiveSync, Ethernet and two network
cards in the desktop pc?

Regards Peter K.

Top