Problem locating Afxinet.h under some configurations

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - CE.NET: Remote Kernel Tracker tool problem Hi, I'm working out test on CE.NET. For some info, I use Remote Kernel Tracker tool. But surprisingly the following situation come out: - when the device IP adress is obtained via DHCP the tool loads OK; - when I specify a device IP adress the tool hangs out. Any ideas of what is going on? Regards, Ognian Tag: Problem locating Afxinet.h under some configurations Tag: 70287
  - 2
    - Fonts and Licensing Hi, I dont know where else to ask this so I hope someone can help. I need arabic script on CE. For test purposes I have loaded a font file from my development PC and all is fine. However since the fonts that are supplied with the SDK / Platform Builder do not include arabic script I am wondering if there would be a Licensing issue with using the equivalent font file taken from a Windows XP installation - or maybe the reason there is no arabic on CE is simply to save space - not a lisencing issue? I cannot track down any info on this so if anyone has any knowledge of the issues here I would value your input. Rgds Dylan. Tag: Problem locating Afxinet.h under some configurations Tag: 70283
  - 3
    - CETK Tests for NAND Flash Dear All, I am working on NAND Flash driver for 32 Mbyte NAND Flash. This is an on-board NAND flash. I want to know if the Storage Device Benchmark Tests are applicable to NAND flash. The Platform Builder 5.0 Help file gives the following description for Benchmark Tests :- " The Storage Device Block Driver Benchmark Test analyzes the performance of a storage device in reading and writing. The test scans a storage device and attempts to read from and write to every sector on the device. The test displays information about the time required to complete each operation. You may find it useful to know the time required to complete a read or write operation if you have problems with the file system on the storage device. For example, the test may show you that one disk takes 400 milliseconds (ms) to write, passing the test, while another disk takes 1500 ms to write, failing the test. The following table shows the hardware requirements for the Storage Device Block Driver Benchmark Test. Requirements Description A storage device- A storage device that uses a memory block (DSK) device driver, for example a PCMCIA ATA disk or PC Card. " any clues? Thanks in advance , ms_noida Tag: Problem locating Afxinet.h under some configurations Tag: 70274
  - 4
    - Cursor Support The on-line help states: â?? To stop the display of the mouse cursor, be sure the SYSGEN_CURSOR variable is not set.â?? But when I remove the OS Core Mouse component that sets SYSGEN_CURSOR, build and test the image, there is still an Arrow cursor that tracks mouse movement. I know that SYSGEN_CURSOR is no longer set because in does not appear in either the sysgensetting.out or __pass1/2.txt files. Does anyone know what is going on here? BTW â?? I am use CE 5.0 on VIA X86 hardware. Tag: Problem locating Afxinet.h under some configurations Tag: 70254
  - 5
    - usb mass storage client driver I was trying to implement mass storage device on USB function controller driver on Windows CE 5.0. After configuring the registry USB function controller driver for Mass storage class and connected the device, I found that one of the command in mass storage READ_FORMAT_CAPACITY (0x23) was not supported. I got the debug messages as below: UsbMsFn!STORE_IsCommandSupported: ++ UsbMsFn!STORE_IsCommandSupported: command 0x23 UsbMsFn!STORE_IsCommandSupported: unsupported command 0x23 UsbMsFn!STORE_IsCommandSupported: -- UsbMsFn!BOT_HandleCBW: command not supported in the mass storage code i found that there was no implementation of the code for this READ FORMAT CAPACITY command. After this command was not processed, the endpoint was stalled and the bus was reset by the USB host. After I hard coded with the READ FORMAT CAPACITY. there is another problem when i tried to write into the SDMMC card which is the mass storage device. it is failing to write into that SDMMC. and the memory property showing the device has zero memory and zero used space( this is happening when i am trying to write into the mass storage device ). thanks Tag: Problem locating Afxinet.h under some configurations Tag: 70252
  - 6
    - NDIS Optimized Receive Handling in CE 5.0 Does anyone have any testimonial for this making much of a difference to their performance ? I spent a lot of time trying to get the performance I wanted in CE 4.1 and ended up never being able to get the stack to accept packets with NdisMIndicateReceivePacket and return NDIS_STATUS_PENDING. It always copied the data and returned immediately with NDIS_STATUS_SUCCESS. I'm wondering if this optimized receive handling is now enabling this functionality in CE where a packet might never get copied, but just passed up and down the stack until return to the driver pool with MiniportReturnPacket. Otherwise, what is this optimization and why don't I get it unless I jump through the list of hoops ? Tag: Problem locating Afxinet.h under some configurations Tag: 70250
  - 7
    - CPU Utilization Changing with Remote Tools Hello, I have a unique problem under WINCE 5.0 I have a network application that seems to be hogging the CPU - It takes up about 60-70% of the processor. This was unacceptable so I started looking into what could be causing the problem. During this debugging process I found something a little confusing ... If I connect the Remote Call Profiler (simply connect, not even launching an app or collecting data - i.e. just having ConPMon.exe running) my App's efficiency all of a sudden drops to an expected value of 10-15% utilization. My first thought was that the Remote Performance Monitor was just reporting the utilization wrong so I ran a TOP like program and it verified this behaviour. I still didn't like it so I hooked a scope up to my board and used the idle routine and a led toggle and sure enough my scope shows the same results. So, I'm left with ConPMon.exe kicking my system into a "good" state. I can disconnect the profiler, restart the app and everything is fine. The system stays in a â??goodâ?? state. This happens if I connect via activesync or a tcp manual cemgr. No other remote tool does this (put system into a "good" state). Moreover, no other tool will remove the system from a "good" state except for the Remote Kernel Tracker. If I try to use the Remote Kernel Tracker all bets are off - the system goes back into a "bad" state and the app runs at 60-70% CPU utilization. Between these two system states the registry is the same. I've tried switching thread priorities and quantum times of my app. With an OS debug build the App runs at around 25% but comparing a retail build to a debug build is a little trickier. I canâ??t seem to find out what constitutes a â??goodâ?? state. I'm leaning toward a socket select call or overall TCP/UDP state causing my problem. The app is pretty simple and only single threaded. ConPMon.exe and my App share the following module linkages: wspm, ssllsp, ws2 (and of course coredll) - all IP "stuff". If anyone is familiar with what might be going on while loading ConPMon.exe and/or the remote kernel tracker and might have some ideas as to what their threads might be changing I would greatly appreciate it. Thanks in advance for you thoughts and advice, Chris -- Chris Kavanagh Software Developer LibreStream Technologies Inc. www.LibreStream.com Unit 200 - 55 Rothwell Rd. Winnipeg, Manitoba Canada R3P 2M5 Tag: Problem locating Afxinet.h under some configurations Tag: 70247
  - 8
    - SetSystemMemoryDivision kills my display? I'm working on a PXA255-based device. I have two different CE images based on the same BSP, the only difference is in catalog components (one falls into the Core license, one into the Pro license). With one image (Pro) the device boots fine, everything is ok. With the other build (Core), when a call to SetSystemMemoryDivision is made that gives Storage Memory < ~20% of available RAM (not sure exactly the division, but it's around there) then the display goes blank. A scope on the pixel clock shows it has quit running. The OS itself is still running. I believe there's a bug somewhere that is in both, but is only manifesting in one image. I also think the fact the pixel clock is killed is just happenstance, on the other image it's probably stepping on memory less obvious. To make things more interesting, KITL and kernel debugging are not an option right now (don't ask), which is why I've not traced into the call. So my questions actually are: 1. Where does the call to SetSystemMemoryDivision go? 2. What might be causing this? I'm not sure where to even start Ideas? -Chris Tag: Problem locating Afxinet.h under some configurations Tag: 70242
  - 9
    - Application in PB We've been developing a system using PB4.2 and eVC++ sp4. I occassionally like to go back a review basic things. So in this case, I decided to do the tutorials (things make much more sense now!). Question - It seems that programs could be developed right in PB. Hence, what significant advantages does eVC++ give me (besides that I can create an SDK for others to develop program sin eVC++)? Just trying to gain more insight... Tag: Problem locating Afxinet.h under some configurations Tag: 70241
  - 10
    - ANN: BSP Consultant Needed We have an immediate need for a consultant to assist in the development of a BSP for a custom FreeScale i.MX21 device (utilizing an existing FreeScale BSP as a base). The estimated need would be for approximately 3 months. We would prefer an on-site scenario, but will consider off-site. If interested please respond to hr at sturdycorp dot com Tag: Problem locating Afxinet.h under some configurations Tag: 70238
  - 11
    - PXA27x / IXP4xx CE5.0 BSPs production readiness? What are the thoughts out there on how "production ready" the shipped CE5.0 BSPs are for the Intel IXP425 and PXA270? We are contemplating a new development with one or other of these processors and will run CE 5.0. MS say that they have put a lot of effort into ensuring that the BSPs for 5.0 are really production ready. We found that it took a lot of work to get the CE .NET 4.2 BSP for the PXA255 to the state where we considered that it was ready for shipping. Is it just as hard for these BSPs or have MS/Intel done what they say? Thanks for all comments, Andrew. Tag: Problem locating Afxinet.h under some configurations Tag: 70220
  - 12
    - OEM ADDRESS TABLE hello, I am developing a BSP using wince 5.0,can any one explain what is OEM ADDRESS TABLE. Tag: Problem locating Afxinet.h under some configurations Tag: 70219
  - 13
    - Issue: netcard driver with hive-based registry in Gateway Platform Hi all, When i build a platform on gateway without hive-based registry streaming, ping, network copying, rest of the applications work fine when i build a platform on gateway with hive-based registry streaming, ping keeps working fine but when network copy is given the following error message is displayed on the host machine connected to gateway. [ cannot copy xxx(filename): The specified network name is no longer available ] and then on the netcard driver no longer performs any operation. To be specific Gateway stops working. When our netcard driver was benchmarked with RTL8139 ethernet driver with hive-based registry enabled and streaming, ping along with network copy was run we observed the similar message on host m/c [ cannot copy xxx(filename): The specified network name is no longer available ] but rest of the applications continued to perform and the Gateway continued to work fine. This observation is found with hive-based registry enabled for without hive-based registry out netcard works fine with all applications(streaming, ping, network copy..etc) following is the hive-based registry entry in platform.reg ; @CESYSGEN IF FILESYS_FSREGHIVE ; HIVE BOOT SECTION [HKEY_LOCAL_MACHINE\init\BootVars] "DefaultUser"="user" "SYSTEMHIVE"="Documents and Settings\\system.hv" "PROFILEDIR"="Documents and Settings" "Start DevMgr"=dword:1 "RegistryFlags"=dword:1 ; END HIVE BOOT SECTION ; @CESYSGEN ENDIF FILESYS_FSREGHIVE The storagemedia for hive files we are using is either NAND/NOR/ATA-HardDisk you'r valuable suggestions will be of great help Thx, Best Regards, James Tag: Problem locating Afxinet.h under some configurations Tag: 70218
  - 14
    - PXA-255 reference boot loader source required Hello, I am working on Porting WinCE on a PXA-255 based custom board. I need some reference source for the boot loader. Our board does not have ethernet support. Any pointer / reference would be of helpful. Thanks and Regards Arun Tag: Problem locating Afxinet.h under some configurations Tag: 70216
  - 15
    - UDC performance on PXA270 Hi. Could someone please share his experience with PXA USB client controller + windows xp sp2 host? I'm not able to reach more than 250KB/s on RNDIS. Other USB function drivers seem to be even slower (eg. USB Serial). So what is the highest speed everyone ever seen on Wince 5.0 on XScale and Windows XP on the host side? It seems to be a strange speed limit of 250KB/s ... Do not understand is it windows xp jokes or PXA270 USB function driver on device, or RNDIS driver itself. Please shed some light on the problem. Thanks. Tag: Problem locating Afxinet.h under some configurations Tag: 70215
  - 16
    - DirectDraw Hi All I want a very basic DirectDraw enabled display driver, as there is no h/w accelerator present in my system. For this, can i just make use of ddgpe.lib functions and do not implement the halpalette.cpp, haldd.cpp & halsurf.cpp in my platform? Thanks, Tag: Problem locating Afxinet.h under some configurations Tag: 70214
  - 17
    - Mass Storage USB Function Driver on PXA27x Working! (Almost) Hi all, I just started to test the USB Mass Storage Function Driver (CE 5.0) on our PXA27x platform a few days ago. At first nothings seemed to work. I installed the latest QFEs (Till Q1 2005), and fixed the whole Cable Detct routine. Now when I connect to my Notebook I get a "Stall send on In Endpoint = 0x1", followed by a 10-20 seconds timeout, then a Stall again. But after some (usually 2-3) loops the Mass Storage device is detected correctly and mounted. Then it works stable for reads and writes. The interesting thing is that if I enable the "Transport" debug zone int the USB function driver, the mass storage is recognized immediately, without stalling. I suspect there is a timing problem somewhere. Another strange thing: if I loopack the USB fucntion with the USB Host on our CE platform the USB mass storage disk is never detected correctly. I get the following Debug Messages in an infinite loop: BOT_DataTransfer error(5.3.3, dwCswErr:1460, dwUsbErr:0x0, dwTimeout:4000) Retry CSW But maybe this is a problem with the USB Mass Storage Client driver on the Host side (I had some problems with other USB mass storage devices in the past) I know there should be some fix available from Microsoft, but I cannot wait much longer. Does anyone know when the fix will be available? Or maybe someone knows how to solve the problem? regards, Germano Kern Toradex www.toradex.com Tag: Problem locating Afxinet.h under some configurations Tag: 70209
  - 18
    - power management issue of WinCE 5.0 Hello, We are getting the problem about power management in the WinCE 5.0. The OS and its entire software stacks cannot recover after going to suspend state. The same problem is mentioned by the Intell in the release note of "830DSTB WinCE 5.0 BSP V3.0". Thay allready fixed this problem in this BSP version. But thay didn't mentioned that how we can overcome this problem. Let me know if anybody knows something about this. Thanks Sanjeev Tag: Problem locating Afxinet.h under some configurations Tag: 70207
  - 19
    - flash write problem Dear all The configuration of my platform is : CPU: sumsang 2410 Flash: K9F1208 64MB SDRAM: micron 64MB OS : wince4.2 My NK.NB0 is 29M in flash. Now,I want use rest flash as "hard disk" directory to write file. I add NAND_FLASH driver and FAT fs, but no "hard disk" or else directory . How can I do? Thanks Tag: Problem locating Afxinet.h under some configurations Tag: 70203
  - 20
    - How do I include the CETK dlls in an emulator image? I'm trying to connect the CETK to my emulator image. I have the image running okay and telnet in. when I execute this line: CEMGRC.EXE /T:TCPIPC.DLL /Q /D:192.168.1.23:2670 I get: Cannot execute CEMGRC.EXE I'm assuming I have to inlude the CE remote tools in my emulator image. How would I do that? (I have done a "viewbin -t NK.bin" and do not see the CEMGRC.EXE in the image, so I'm sure it's not in my image) Tag: Problem locating Afxinet.h under some configurations Tag: 70197
  - 21
    - What's in an SDK? Do you need one if Platform Builder is on the same machine? If you generate an SDK with platform builder, then just install it on the same machine, could you just skip the SDK, use the standard SDK, and use lib and include paths to point into the platform directories to get headers and libs? The reason I ask is that so far we have had a lot of trouble re-creating our 4.2 projects in the 5.0 IDE. It seems MS has removed a lot of functionality in order to only support the command line. So far there's been a learning curve (where are my menu options, where are my settings), plus some apparent bugs (have to create an new empty .def file if you rename the output), plus apparent compiler\tool differences (3.0 and 4.2 could compile STLPort, but 5.0 seems to have some problems... but eVC does not... even though apparently eVC with SP4 is same compiler as PB 5.0).... so we were going to try just using eVC, but then you have to create an SDK... this is an rather long extra step it would be nice to do without if we just can "repoint" eVC at the platform directories. Andrew Tag: Problem locating Afxinet.h under some configurations Tag: 70184
  - 22
    - What's in an SDK? Do you need one if Platform Builder is on the same machine? If you generate an SDK with platform builder, then just install it on the same machine, could you just skip the SDK, use the standard SDK, and use lib and include paths to point into the platform directories to get headers and libs? The reason I ask is that so far we have had a lot of trouble re-creating our 4.2 projects in the 5.0 IDE. It seems MS has removed a lot of functionality in order to only support the command line. So far there's been a learning curve (where are my menu options, where are my settings), plus some apparent bugs (have to create an new empty .def file if you rename the output), plus apparent compiler\tool differences (3.0 and 4.2 could compile STLPort, but 5.0 seems to have some problems... but eVC does not... even though apparently eVC with SP4 is same compiler as PB 5.0).... so we were going to try just using eVC, but then you have to create an SDK... this is an rather long extra step it would be nice to do without if we just can "repoint" eVC at the platform directories. Andrew Tag: Problem locating Afxinet.h under some configurations Tag: 70182
  - 23
    - Sample App Programm to Play Sample DirectShow Ball Filter Is that available somewhere? It seems all the DShwo app samples are just smart players to play media files. Sorry, I am really new on DShow development. Thanks in advance. Best. Rui Tag: Problem locating Afxinet.h under some configurations Tag: 70181
  - 24
    - Problem seeing OutputDebugStrings output from CE 5.0 target Hello All, I have created a device driver for my CEPC system, which I have included in the sysgen, along with registry entries to automatically load my driver on bootup. Over the course of my XXX_Init() routine, I call OutputDebugString() a number of times to send debug output to the debugger (PB 5.0); and I believe the XXX_Init() is indeed being called, becaused my driver appears in the "gi mod" list. However, I never see the debug statements. What might be the problem? More Specific Info on my configuration: 1] I am using Platform Builder 5.0 to attach to the device and download the image. This process works successfully. 2] As noted, the command "gi mod" shows my device driver among the other modules. My driver is also listed under the builtin/active registry key. I take these signs to indicate that my device driver is being loaded, and that my XXX_Init() routine is being called. Is this a valid assumption? 3] I am looking for the output from OutputDebugString() in the "debug" pane of the Platform Builder environment. Is this where it should appear? [I also checked the terminal showing the bootup serial output, and the debug statements do not appear there, either.] 4] I am using the "release" build of the CEPC system (since the debug build had errors during the sysgen). Would this affect whether the debug strings are displayed? I am inclined to think that it would not, especially since I do see debug statements from other drivers in the system (such as the keyboard layout driver). Sincerely, Avi Shmidman Jerusalem, Israel Tag: Problem locating Afxinet.h under some configurations Tag: 70160
  - 25
    - May be a IE bug ? Hi all: My Platform: 64MB SDRAM,32MB FLASH,PXA270,HDD(20GB), CE 5.0. Use IE to download a file(size 700MB) from a FTP server, then message box show "There is not enough free storage space.Delete one or more files to free storage space,and then try again." . But the IE Cache location has been setted to hard disk,setting as following: [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders] "Cache"=" \\IDE Hard Disk\\Profiles\\guest\\Temporary Internet Files" But seems no use. Tag: Problem locating Afxinet.h under some configurations Tag: 70150
- Next
  - 1
    - ActiveSync compatibility with CE 5.0 Hi, We are developping a new Windows CE 5.0 platform. This device has an internal flash to store data. Also, this platform has an Ethernet port. We want to use the free ActiveSync software to extract data from the device to the PC. The ActiveSync software support the Ethernet connection (Very fast to upload/download data). We want to inform our client to download ActiveSync from our web site or the microsoft web site. The question is: Does futur version of ActiveSync (3.8, 4.0, etc...) wiil be always compatible with Windows CE 5.0.? It be a very important issue because we can't tell our client to "remove his new ActiveSync" to return to an old ActiveSync version to keep the compatibility with CE 5.0 Thank you Alain Roberge Tag: Problem locating Afxinet.h under some configurations Tag: 70142
  - 2
    - Firewire storage on CEPC Hi all, I can't get a specific Firewire storage device (CompactFlash card in an external Firewire adapter) to be recognized. My platform is a Windows CE 4.2 .NET CEPC on a VIA Eden & Prosavage/ Twister based device. A standard external Firewire to IDE adapter works fine with an IDE hard disk with FAT file system. What do I have to check to verify that my hardware can or can't work with CE? thanks in advance Marc Tag: Problem locating Afxinet.h under some configurations Tag: 70141
  - 3
    - Can I directly put files into ResidentFlash in platform.bib ? Hi, I know I can use platform.bib to add our files to windows directory of device. I know I can use platform.dat to copy file to another director of device. I have a "ResidentFlash" that is FAT format in my device. Howerver, I have some questions: 1) Can I specify different target directory of device in platform.bib ? 2) Can I directly put files into ResidentFlash in platform.bib ? Thanks. Yu. Tag: Problem locating Afxinet.h under some configurations Tag: 70139
  - 4
    - dll load address hi all! I'm trying to read the dll import table using a pointer initialized to modBaseAddr field of the structure MODULEENTRY32 filled by the Toolhelp api but as I read the first byte pointed by this pointer, the system throws an access violation exception how can I read the memory where the system loads the dll linked by my process ? If I open remote process viewer , for example the coredll.dll is linked by many processes, but the displayed Base Addr is the same for all processes.....what is meaning? maybe this base address is valid only for the kernel ? how can I get a valid address for my calling process ? best regards Marco Tag: Problem locating Afxinet.h under some configurations Tag: 70137
  - 5
    - ARM Developer Suite and WinCE 4.2 Hi, I am using ARM Debugger to develop a RAM Based eboot. (Just for testing purpose no other intention). Using the debugger i am able to downlaod a RAM WinCE 4.2 OS Image and jump there. FYI, I tested this using a Eboot in Flash Memory. Since my flash chip gone bad i am doing this using a SDRAM Eboot. But, when i jump there my ADS is loosing the control on the Target. I could see that after completion of OS downlaod it is just jumping to the SDRAM no reset in WinCE code AFAIK. Infact, it saying that a "Dead Target" and giving a message as target may be needed to restarted. Can anyone please suggest ? Thanks & Regards, Peter Tag: Problem locating Afxinet.h under some configurations Tag: 70135
  - 6
    - where to find mfcce300.dll? Hi,all Where can I find mfcce300.dll and olece300.dll(x86 version) to download? I've searched on google but in vain. Would someone send them to me? My email address is mileswang2000 at sina.com, it's an emergency! Thanks! maverick Tag: Problem locating Afxinet.h under some configurations Tag: 70129
  - 7
    - Ndis wlan driver porting, ISR and dma issues Hi, I am porting a XP NDIS 5.1 wlan driver to WinCE 5.0. My platform is CEPC The wlan device is a PCI device. I use ethernet for download and kitl for debug messaages 1) When I register the interrupt using NdisMRegisterInterrupt it succeeds with irq 9 and sysintr 18 assigned. But the os crashes immediately after that with access violation exception. The source of crash is tough to find since the debug messages and call stack are not consistent. From the available debug messages it appears that there is no irq conflict. The miniportisr never gets called hence i am suspecting that registering the isr or irq is a issue here. If i dont register the interrupt the driver loads completely and is stable but obviously no interrupts will be handled. I am thinking of using installable isr since the interrupt might be shared and since the driver uses the wlan chip register to detect the interrupt. 2) The original driver in windows uses mapregisters for dma operation. since mapregisters are not supported in CE how can the dma operation be achieved. Can anyone please help with the above issues. Regards Vijay Tag: Problem locating Afxinet.h under some configurations Tag: 70128
  - 8
    - TI PC Card driver + CISCO Aironet 340/350 PCMCIA WLAN Card Hi all, I am developing Windows CE 5.0 on x86 Platform. I uses the TI PC Card driver in Platform Builder for Ricoh 475II (one slot). This driver perform well with ATADISK and NE2000 ethernet card. But only CISCO Aironet 350 can't work, and I am sure I add CISCO driver into my image. I show some debug message below. If anyone is able to help I would greatly appreciate it. Thanks, Jacky I found that it couldn't get PCMCIA register address, and stop at get bfuncID ==DEBUG MESSAGE== 84123 PID:c3b9ffba TID:3a0dcd2 0x83a0da40: CPCPcmciaCard::GetConfigureRegisterBase: Can't get PCMCIA register address. return FAILS 84135 PID:c3b9ffba TID:c39f2802 0x83925cc4: GetCardCRC: CardGetFirstTuple returned fails 84140 PID:c3b9ffba TID:c39f2802 0x83925cc4: PCCARD: DEBUGCHK failed in file E:\macallan\public\COMMON\oak\drivers\pccard\mdd\mdd_both\..\pcmciaen.cpp at line 662 Tag: Problem locating Afxinet.h under some configurations Tag: 70126
  - 9
    - How to change the default Background Image? Hi, I'm using PB5.0 to customize out product, I want to change the default background image to put up features of our company, how can I? Best regards, Jack Tag: Problem locating Afxinet.h under some configurations Tag: 70124
  - 10
    - removing Unfilled ROM holes is it possible? and why do they exist in the first place... ? i am in a tight memory environment..... 8K means a lot to me now. BUILD: [01:0000000092:INFO ] Unfilled ROM holes (address, length): BUILD: [01:0000000093:INFO ] 80024010 4080 80023358 3240 80021af8 1288 BUILD: [01:0000000094:INFO ] total space 8608 in 3 ranges Tag: Problem locating Afxinet.h under some configurations Tag: 70123
  - 11
    - removing the 4K jump in eboot start up code? hi i am porting my system from nor flash to nand flash, and the XIP block of the nand flash is very limited so i want to safe space by cutting the 4K jump in eboot. is it possible? i remember someone posted info about it but i couldn't find it in google. thx Tag: Problem locating Afxinet.h under some configurations Tag: 70122
  - 12
    - RDP Printers Disable winCE5.0 hi~all i develop thin client shell in winCE5.0 Using WinCE5.0, Thin client RDP Printers is always disable. But WinCE 4.2 thin clientâ??s thin client RDP Printers is able. (or disable) I want to select Printers. But, In Windows CE 5.0 Thin Client, it is disable. Alwaysâ?¦ Do you have solvent to the problem? Tag: Problem locating Afxinet.h under some configurations Tag: 70121
  - 13
    - RDP Printer Disable in Windows CE 5.0 Hi~ I am developer windows CE 5.0 IN KOREA. To develop thin client shell. but RDP Printer is disable. i don't know the solvent. Tag: Problem locating Afxinet.h under some configurations Tag: 70119
  - 14
    - how to disable the destop window, as only the application window run. hi all. aming using the pb42 to customize our product. As i need only the application run after the CE boot. That mean no desktop window is appeared before the application window run. how can i? thanks in advance. Tag: Problem locating Afxinet.h under some configurations Tag: 70114
  - 15
    - ROMOFFSET HELLO, what is the significance of ROMOFFSET in boot.bib, can anyone explain what it actually does Tag: Problem locating Afxinet.h under some configurations Tag: 70112
  - 16
    - An NDIS intermediate driver issue. Can I build a NDIS intermediate driver on WinCE 5.0 and install it on Windows Mobile 2003? Can this NDIS driver be loaded by the OS? Tag: Problem locating Afxinet.h under some configurations Tag: 70109
  - 17
    - How to build DShow Filter samples This sounds a newbie question, although I've been working on CE for some time. ;) I am trying to pull in the sample DShow filter samples "ball" to my workspace and build it into a DLL (the original sources file builds it as a lib). I modified the sources file to build it as a DLL, as showed in the following, but I am still having some unresolved externals: BUILD: [01:0000000098:ERRORE] strmbase.lib(mtype.obj) : error LNK2001: unresolved external symbol _GUID_NULL BUILD: [01:0000000099:ERRORE] strmbase.lib(amvideo.obj) : error LNK2001: unresolved external symbol _GUID_NULL BUILD: [01:0000000100:ERRORE] strmbase.lib(amfilter.obj) : error LNK2001: unresolved external symbol _IID_IUnknown BUILD: [01:0000000101:ERRORE] strmbase.lib(combase.obj) : error LNK2001: unresolved external symbol _IID_IUnknown BUILD: [01:0000000102:ERRORE] strmbase.lib(dllentry.obj) : error LNK2001: unresolved external symbol _IID_IUnknown BUILD: [01:0000000103:ERRORE] strmbase.lib(amfilter.obj) : error LNK2001: unresolved external symbol _IID_IPersist BUILD: [01:0000000104:ERRORE] strmbase.lib(dllentry.obj) : error LNK2001: unresolved external symbol _IID_IClassFactory TARGETNAME=ball TARGETDEFNAME=$(TARGETNAME) TARGETTYPE=DYNLINK DLLENTRY=DllMain RELEASETYPE=PLATFORM INCLUDES=$(_TARGETPLATROOT)\inc;$(_COMMONSDKROOT)\inc;$(_COMMONOAKROOT)\inc;$(_COMMONDDKROOT)\inc;$(_PUBLICROOT)\shellw\oak\inc SOURCELIBS= \ $(_PUBLICROOT)\directx\sdk\lib\$(_CPUINDPATH)\strmbase.lib\ TARGETLIBS=$(_COMMONSDKROOT)\lib\$(_CPUINDPATH)\coredll.lib \ $(_COMMONSDKROOT)\lib\$(_CPUINDPATH)\Ole32.lib \ $(_COMMONSDKROOT)\lib\$(_CPUINDPATH)\Oleaut32.lib \ $(_COMMONSDKROOT)\lib\$(_CPUINDPATH)\coredll.lib \ $(_COMMONSDKROOT)\lib\$(_CPUINDPATH)\strmiids.lib \ Do I miss some libs? Or I am linking some of them in a wrong way? Thanks. Rui Tag: Problem locating Afxinet.h under some configurations Tag: 70108
  - 18
    - Where is the code to copy file to storage memory ? Hi, My device OS is WinCE 4.2. I would like to keep the ActiveSync functions. Howerver, I would like to prevent users from copying files to storage memory of device from PC by ActiveSync. Where are the source codes that are responsible for copying files to storage memory from PC by ActiveSync ? Thanks. Yu. Tag: Problem locating Afxinet.h under some configurations Tag: 70106
  - 19
    - Running prelink.bat in eboot build Hi all, I tried to have a prelink.bat file run while building the boot loader, but it never gets called in the build process. Do you know how I can do that? Thanks, NN Tag: Problem locating Afxinet.h under some configurations Tag: 70104
  - 20
    - Unable to initialize the catalog Hi, During the installation of the Windows CE 5.0 eval I received the "Unable to initialize the catalog" error. This message also occurs when I launch the platform builder. I tried to reset the catalog using the cleandb.bat file. This fails with the following: Could not load catalog database 'C:\WINCE500\public\COMMON\oak\Catalog\Database\ pbdb.mdb'. ******* Import failed! Check the CEC file syntax and parameters. The pbdb.mdb file does exist and I do have admin priv's. Does anyone any insight into this issue? Thanks, Vinnie S. Tag: Problem locating Afxinet.h under some configurations Tag: 70103
  - 21
    - Aspen PCMCIA bug (4.2) and question Hello all, Our 4.2 platform uses an FPGA to implement a PCMCIA controller. We based our design on the HD64465 PCMCIA controller register set, since our hardware bears some resemblence to the Aspen platform (ie its an SH4, and uses the SH4 areas 5 & 6 for PCMCIA bus signals). Anyway, I found a bug in the Aspen PCMCIA code for 4.2 in the PDCardSetSocket() function in hd465socket.c. The bug is in the code that configures fInterruptEvents - a missing "squiggle". Specifically, line 344 reads: DisableCSCIERInts &= CC_PCMCIA_CSCIER_STSCH_INT_EN; but it should be changed to: DisableCSCIERInts &= ~CC_PCMCIA_CSCIER_STSCH_INT_EN; On the same topic (same code function) I have a question for anyone (MS or Renesas) who might have some familiarity with this code... Why does a request to enable interrupts from the card detect lines also enable interrupts for RDY and STSCHG (in IO mode)? PDDs for other controllers don't do that - the result seems to be that the PCMCIA MDD gets more interrupts than it expects to. Andrew Tag: Problem locating Afxinet.h under some configurations Tag: 70102
  - 22
    - Corrupt mouse cursor We are using CE 5.0 with VIA CLE266 x86 hardware and have occasionally (3-4 times) seen where several areas of the LCD display have 'garbage' displayed that we do not explicitly display. After some investigation, we connected a USB mouse/keyboard and found that the two areas responded to mouse movement and consequently seem to be a corrupted cursor. One area is ~60 pixels high by 4 pixels wide, appears on the top left display border and only moves veritcally in response to mouse movements. The other area is ~60 pixels high by 60 pixels wide, appears on the right display border with only one horizontal pixel displayed initially and moves vertically and horizontally in response to mouse movements. This is all very peculiar because at startup our application sets the cursor off screen( SetCursorPos( ::GetSystemMetrics(SM_CXSCREEN)+10, 0 ); ), our hardware has no mouse, keyboard or other device that moves the cursor and we never reposition the cursor. From the observed behaviour, it appears to me that the cursor is both being redefined to a much larger cursor and may also be repositioned into the display area. I don't know how this can happen and would be interested in any comments, suggestions, etc. Thanks Tag: Problem locating Afxinet.h under some configurations Tag: 70098
  - 23
    - hooking the PlaySound function The following fragment is taken from the file wavedev.h: typedef BOOL (*PFN_PLAY_SOUND_HOOK_START)( LPCWSTR szSoundName, DWORD dwSndType ); The accompanying comment seems to suggest that the function (snd)PlaySound could be hooked before and after the actual playing of the sound. Could anybody tell me where to find details about how this could be achieved? Thank you. Tag: Problem locating Afxinet.h under some configurations Tag: 70097
  - 24
    - USB Function controller Mass storage command not supported I was trying to implement mass storage device on USB function controller driver. After configuring the registry USB function controller driver for Mass storage class and connected the device, I found that one of the command in mass storage READ_FORMAT_CAPACITY (0x23) was not supported. I got the debug messages as below: UsbMsFn!STORE_IsCommandSupported: ++ UsbMsFn!STORE_IsCommandSupported: command 0x23 UsbMsFn!STORE_IsCommandSupported: unsupported command 0x23 UsbMsFn!STORE_IsCommandSupported: -- UsbMsFn!BOT_HandleCBW: command not supported in the mass storage code i found that there was no implementation of the code for this command. After this command was not processed, the endpoint was stalled and the bus was reset by the USB host. Can any one let me know if mass storage works on USB function controller driver. How to go about this problem that we are facing? Thanks a lot in advance. -Rams. Tag: Problem locating Afxinet.h under some configurations Tag: 70090
  - 25
    - KernelFindMemory and cache write-back Hi, I've found something weird in the WinCe kernel start-up code: In the KernelfindMemory function (that's called right after OEMInit), the kernel sets up some data in the RAM via some uncached access and at the end of KernelfindMemory writes-back the whole cache in RAM. The result is that the data that had been set up in RAM may be (and in my case was) overwritten with some bad values. I've seen this when running CE 5.0 (and 4.2 as well) on a AT91RM9200 (ARM920T) Here is a sample from the kernelFindMemory function (located in loader.c in the private branch) .... // *MUST* make the pointer uncached (thus or in 0x20000000) // // LogPtr at the start of RAM holds some header information // LogPtr = (fslog_t *)PAGEALIGN_UP ((pTOC->ulRAMFree+MemForPT)| 0x20000000); [ .. do a lot of things with LogPtr's content... ... ] OEMCacheRangeFlush (0, 0, CACHE_SYNC_WRITEBACK); ... The thing is that it may happen that the cache line where logPtr's content would be located may be in cache and dirty when KernelFindMemory is called. In this case, when OEMCacheRangeFlush, we loose the new content of LogPtr. Depending on the mapping of the kernel, it may or may not happen. When the problem happens, the platform stops executing and usually display wrong values in the list of the memory sections (Start value would be 0x000000000 for example instead of something like 0x800xxxxx). The workaround for this is to write back the cache at the end of OEMInit. My question is: Is this something that somebody had already seen? Would this happen because we've forgotten to take care of something in our BSP? ---------------------------------------------------------------- Jean-Jacques Hiblot ADENEO (ADESET) Windows Embedded Consultant <jjhiblot AT adeneo DOT adetelgroup DOT com> http://www.adeneo.adetelgroup.com Tél : +33 (0)4.72.18.57.77 Fax : +33 (0)4.72.18.57.78 ---------------------------------------------------------------- Tag: Problem locating Afxinet.h under some configurations Tag: 70082

Platform Builder cannot find Afxinet.h when compiling an added application
into the Emulator Release image.
However there is no problem under the x86 configuration it has no problems.

What should I be looking for to locate the issue?

Rgds
dylan.

Top

RE: Problem locating Afxinet.h under some configurations by AsangDani

AsangDani
Sun Jun 26 11:15:03 CDT 2005

Try adding MFC support (SYSGEN_MFC) from catalog. You will also have to add
corresponding include and library directories to your 'sources' file.

--
Asang Dani

"dice" wrote:

> Platform Builder cannot find Afxinet.h when compiling an added application
> into the Emulator Release image.
> However there is no problem under the x86 configuration it has no problems.
>
> What should I be looking for to locate the issue?
>
> Rgds
> dylan.

Top