Hi,
I have a problem using my wireless network in PEAP + MSChapV2 mode.
Context:
Target:
- CE 4.2 or 5.0
- x86
- Atheros Wireless driver for PCI chips (AR5212)
- WZC
- PEAP, MSChapV2 enabled
- demo certificate from FreeRadius.net (FreeRADIUS.net-CA.crt)
- Debug mode
RADIUS server:
- FreeRADIUS.net-1.1.3-r0.0.2
Access Point:
- Belkin F5D7632 ("ADSL modem with Wireless-G router")
After I enter the user/password in the box that pops-up upon Connect,
everything goes fine for about 5 minutes, then the user/password box pops
again and I have to reenter the password to restore the connection, for 5
more minutes, etc!
Needless to say that I check the "Remember Password" item in the dialog box.
From the trace, I can see that the EAPOL session is ended after the
reception of a Failure packet:
1093092 PID:2f671842 TID:ef2e602 0x8ee53b28: EOL: Supp RX
Type=EAPOL_EAP_Packet
1093092 PID:2f671842 TID:ef2e602 0x8ee53b28: EAP: Supp RX packet 0x4 bytes:
1093092 PID:2f671842 TID:ef2e602 0x8ee53b28: 0000 04 0E 00 04 -
....
1093092 PID:2f671842 TID:ef2e602 0x8ee53b28: EAP: Supp RX Type=Failure Id=14
1093092 PID:2f671842 TID:ef2e602 0x8ee53b28: EAP: Supp TX packet 0x0 bytes:
1093092 PID:2f671842 TID:ef2e602 0x8ee53b28: EOL: State 5 --> HELD
1093092 PID:2f671842 TID:ef2e602 0x8ee53b28: EOL: StartTimer 60 secs,
state=7
1093093 PID:2f671842 TID:ef2e602 0x8ee53b28: ZCF:: LogEvent close current
failed EAPOL session for [B54]..
1093093 PID:2f671842 TID:ef2e602 0x8ee53b28: EOL: State 7 --> DISCONNECTED
Does anybody have an idea of what can be wrong?
What is the origin of the EAP "Failure" packet (CE, RADIUS of AP)?
Thanks.
Remi