PEAP Authentication not working

Hi

I'm totally lost here

I enabled PEAP authentication. WLAN gets associated with AP but while
authentcating I'm getting a popup asking for username and password.
But even if I give the right credentials the popup comes back
immediately(not sure whether it is waiting for reply from AP).

Each time I click ok in popup, I see in the dbg messages that
somethimg is transmitted to the AP. But it is not getting
Authenticated. Also I see some errors like
"Unknown: DEBUGCHK failed in file d:\macallan\private\winceos\comm
\ndis51\sys\miniport.c at line 3753"

But I'm able to connect to AP with PEAP from my laptop.

I have attached the debug msgs output below.

Help me out guys. Sitting with this issue for quite lonnggggg.

-----------------------------------------------------------------------------------------

NDIS:: Indicating [MEDIA_CONNECT] to [NDISUIO].

0x83ab7c5c: WZCSVC:: NIO:: WARNING - Discarding EAPOL packet length 69
from 001A30B812C7, EAPOL processing currently disabled
0x83ab7400: NIO: Send EAPOL packet type 888E 18 bytes to
DestMAC=001A30B812C7
0x83ab7400: Tx:EAPOL To Target
0x83cf2dac: NIO: Send EAPOL packet type 888E 39 bytes to
DestMAC=001A30B812C7
0x83cf2dac: Tx:EAPOL To Target
0x83ab7400: NIO: Send EAPOL packet type 888E 39 bytes to
DestMAC=001A30B812C7
0x83ab7400: Tx:EAPOL To Target
0x83ab7400: NIO: Send EAPOL packet type 888E 39 bytes to
DestMAC=001A30B812C7
0x83ab7400: Tx:EAPOL To Target
0x83cf2dac: NIO: Send EAPOL packet type 888E 39 bytes to
DestMAC=001A30B812C7
0x83cf2dac: Tx:EAPOL To Target
0x83cf2dac: ZCF:: Warning! Disable connection to [PVWNET200]
permanently.

0x83cf2dac: ZCF:: LogEvent close current failed EAPOL session for
[PVWNET200]..

0x83cf2dac: OID_802_11_SSID0x83ae9a88: DisassocCFM

0x83ae9a88: Connection lost: indicated to NDIS0x83ae9a88: Unknown:
DEBUGCHK failed in file d:\macallan\private\winceos\comm\ndis51\sys
\miniport.c at line 3318

0x83ae9a88: DEBUG_BREAK @01c29684 MD=1f Ignored.

0x83ae9a88: Unknown: DEBUGCHK failed in file d:\macallan\private
\winceos\comm\ndis51\sys\miniport.c at line 3753

0x83ae9a88: DEBUG_BREAK @01c29f88 MD=1f Ignored.

0x83ae9a88: PHGHHAL_EVNT_DISCONNECT0x83ae9a88:
PHGHHAL_EVNT_DISCONNECT0x83ae9a88: Connection lost: indicated to
NDIS0x83ae9a88: Unknown: DEBUGCHK failed in file d:\macallan\private
\winceos\comm\ndis51\sys\miniport.c at line 3318

0x83ae9a88: DEBUG_BREAK @01c29684 MD=1f Ignored.

0x83ae9a88: Unknown: DEBUGCHK failed in file d:\macallan\private
\winceos\comm\ndis51\sys\miniport.c at line 3753

0x83ae9a88: DEBUG_BREAK @01c29f88 MD=1f Ignored.

0x83cf2dac: Connection lost: indicated to NDISc:
OID_802_11_SSID0x83ab7400: ZCF:: LogEvent new list selected.. Close
current EAPOL session for []..

Remi
Fri Jul 13 02:33:51 CDT 2007

Hi,

Just one stupid thought (I had this problem once): did you check that
time/date on your device is coherent with time/date of your authentication
(RADIUS) server?

Remi

Hector
Fri Jul 13 11:27:49 CDT 2007

It's also interesting to uncheck the 'Validate Server' checkbox inside the
PEAP properties screen for a first attempt to connect.

"Remi de Gravelaine" <gravelaine at aton dash sys dot fr> wrote in message
news:exy3sASxHHA.4736@TK2MSFTNGP04.phx.gbl...
> Hi,
>
> Just one stupid thought (I had this problem once): did you check that
> time/date on your device is coherent with time/date of your authentication
> (RADIUS) server?
>
> Remi
>
>

80
Sun Jul 15 20:00:26 CDT 2007

I did all those changes.

I have taken out the validate server and I set the time and date
properly in my device before connecting.

Even now I see the pop up coming again and again. Has anyone
experienced this issue ?

1) From the debug output I see this
"Unknown: DEBUGCHK failed in file d:\macallan\private\winceos\comm
\ndis51\sys\miniport.c at line 3753". What does this mean ?