OsAxsHwTrap problem

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Bug in av_upnp.h ? Hi, When trying to ude Network media devices (NMD) under ce6-R2, I encounterred something I believe to be a "real" bug. In av_upnp.h (public/servers/oak/inc) line 1648 there is a for loop. The variable i is used outside the for loop in the next if-clause. This does not compile under c++ !!! To fix this , I had to declare the variable i, before the for-loop. Another thing I am still busy figuring out is : MediaQueryEngine_t::Initialize(...) is reported as unresolved. The UnInitialize() counterpart, is linked OK, these 2 methods are declared side by side, in the same sourcefile (MediaQueryEngine.cpp in public\directx\oak\samples\nmd\inc ) So Why can it link the one,. but not the other ? Please advise.... Greetings, Rob Tag: OsAxsHwTrap problem Tag: 106605
  - 2
    - DrWhatsonsize in WINCE 5.0 Hi All, I am working on WM6 porting on OMAP2430.After getting out of OEMInit Am getting following error messages after OEMCacheRangeFlush is done. -OEMCacheRangeFlush Using Paging Pool, size = 0x00200000, Addr = 0x844e1000, gpPoolArr = 0x846e1000 Error Reporting Memory Reserved, dump size = 0004b000 Booting Windows CE version 5.02 for (ARM) &pTOC = 8400a0d4, pTOC = 842fd320, pTOC->ulRamFree = 844e1000, MemForPT = 00202000 Old or invalid version stamp in kernel structures - starting clean! Configuring: Primary pages: 5839, Secondary pages: 0, Filesystem pages = 228 Booting kernel with clean memory configuration: Memory Sections: [0] : start: 846e4000, extension: 00002000, length: 016cf000 Sp=ffffc7cc ARMInit done. Windows CE KernelInit Updated eptr->e32_vsize to = 000bf000 Scheduling the first thread. 0x85db4024: KernelInit2: pCurThread=85db4024 hCurThread=05db4266 hCurProc=05db4002, KernelInit = 84029f14 0x85db4024: Detecting VFP...0x85db4024: VFP Not Found! 0x85db4024: Updated eptr->e32_vsize to = 00006000 I have removed all the log messages in above log so that int can become compact. Can you please tell me how should over come this error ("Error Reporting Memory Reserved, dump size = 0004b000") Following is my config.bib file MEMORY IF IMGULDR ! NK 82000000 05000000 RAMIMAGE RAM 87000000 00000000 RAM ARGS 87BAF800 00000800 RESERVED GSM 87BB0000 00350000 RESERVED dwOEMFailPowerPaging 00000000 00000001 FIXUPVAR dwOEMDrWatsonSize 00000000 0004B000 FIXUPVAR dwOEMPagingPoolSize 00000000 00200000 FIXUPVAR #if defined IMGTPC dwOEMPlatform 00000000 00000001 FIXUPVAR #elif defined IMGPPC dwOEMPlatform 00000000 00000002 FIXUPVAR #endif defined IMGTPC ELSE NK 84000000 00200000 RAMIMAGE RAM 84200000 01C00000 RAM ARGS 87BAF800 00000800 RESERVED ENDIF IMGULDR Thanks in advance. Tag: OsAxsHwTrap problem Tag: 106602
  - 3
    - SMBus driver testing Dear all, I have a driver for SMBus so if i need to check the driver is working properly how to test it? Is there any third party drivers and test applicationd that are available if so please reply with a link, Wince 5.0 and 6.0 82855 GME chipset and 82801DBM... How to test the SMBus driver? Regards, sankarraj Tag: OsAxsHwTrap problem Tag: 106600
  - 4
    - Communication Error 608 Hi i am using PXA270, WINCE 5.0 with Mainstone II BSP. I am facing a stange problem. I am using FFUART and BTUART as COM Port. If I change any of these registry settings during runtime i am getting Communication Error 608 while connecting the Active sync. I would like to know what is the relation between serial port registry settings and Active sync. How to sort out this problem?? regds karthick Tag: OsAxsHwTrap problem Tag: 106597
  - 5
    - MMSYSERR_NOMEM in WaveInPrepareHeader() Hi there, This issue occurs after about half an hour running on a Windows CE 5.0 platform. Some post said it's due to the incorrect initialization of the WAVEHDR. But it does not help. Below is the main body of the codes: //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++ __inline void INIT_WAVEHDR(LPWAVEHDR pwh, LPBYTE pData, DWORD cbData) { pwh->lpData = (LPSTR)pData; pwh->dwBufferLength = cbData; pwh->dwFlags = 0; pwh->dwLoops = 1; // or 0, same result } void CALLBACK waveInProc( HWAVEIN hwi, UINT uMsg, DWORD dwInstance, DWORD dwParam1, DWORD dwParam2) { switch(uMsg) { case WIM_DATA: ReleaseSemaphore((HANDLE)dwInstance, 1, NULL); break; default: break; } } void CALLBACK waveOutProc( HWAVEOUT hwo, UINT uMsg, DWORD dwInstance, DWORD dwParam1, DWORD dwParam2) { switch(uMsg) { case WOM_DONE: ReleaseSemaphore((HANDLE)dwInstance, 1, NULL); break; default: break; } } MainFunction() { const DWORD cbwh = sizeof(WAVEHDR); HANDLE hWaveOutDone = CreateSemaphore(NULL, NOF, NOF, NULL); HANDLE hWaveInReady = CreateSemaphore(NULL, 0, NOF, NULL); waveInOpen(&hwi, 0, &wfx, (DWORD)waveInProc, (DWORD)hWaveInReady, CALLBACK_FUNCTION); waveOutOpen(&hwo, 0, &wfx, (DWORD)waveOutProc, (DWORD)hWaveOutDone, CALLBACK_FUNCTION); for(dwIndex = 0; dwIndex < NOF; ++dwIndex) { memset(&who[dwIndex], 0, cbwh); memset(&whi[dwIndex], 0, cbwh); INIT_WAVEHDR(&whi[dwIndex], pWaveInBuffer[dwIndex], cbwh); waveInPrepareHeader(hwi, &whi[dwIndex], cbwh); waveInAddBuffer(hwi, &whi[dwIndex],cbwh); } waveInStart(hwi); dwIndex=0; for(;;) { WaitForSingleObject(hWaveInReady, INFINITE); // the line below is commented out and the issue also occurs... // AudioProcess(pWaveInBuffer[dwIndex], pWaveOutBuffer[dwIndex]); WaitForSingleObject(hWaveOutDone, INFINITE); INIT_WAVEHDR(&who[dwIndex], pWaveOutBuffer[dwIndex], BUF_LEN); waveOutUnprepareHeader(hwo, &who[dwIndex], cbwh); memset(&who[dwIndex], 0, cbwh); INIT_WAVEHDR(&who[dwIndex], pWaveOutBuffer[dwIndex], BUF_LEN); waveOutPrepareHeader(hwo, &who[dwIndex], cbwh); waveOutWrite(hwo, who[dwIndex], cbwh); INIT_WAVEHDR(&whi[dwIndex], pWaveInBuffer[dwIndex], BUF_LEN); waveInUnprepareHeader(hwi, &whi[dwIndex], cbwh); memset(&whi[dwIndex], 0, cbwh); INIT_WAVEHDR(&whi[dwIndex], pWaveInBuffer[dwIndex], BUF_LEN); waveInPrepareHeader(hwi, &whi[dwIndex], cbwh); waveInAddBuffer(hwi, &whi[dwIndex], cbwh); dwIndex = (NOF == dwIndex + 1) ? 0 : dwIndex + 1; } } //----------------------------------------------------------------------------- Tag: OsAxsHwTrap problem Tag: 106594
  - 6
    - CE6: What is "Orphaned Nodes" in Catalog Editor I am working on WIndows Embedded CE6 SP1 and recently tried to add one new driver node in the BSP .pbcxml file. The target BSP is one vendor provided (not included in CE6). When I opend .pbcxml in using Catalog editor, it shows nothing besides "Catalog [current file]" node, while the "Source" tab includes various node definition codes. Then, when I changed File Version property of "Catalog [current file]" node, the Catalog editor view shows various driver node under "Orphaned Nodes" folder icon node. So - what is "Orphaned Nodes"? How one can resolve / add driver node in this BSP catalog file? ---- Hiroyuki Tag: OsAxsHwTrap problem Tag: 106592
  - 7
    - How to "properly" modify a Core OS source code file in PB? I'm using VS2005 SP1 with PB 6.0 SP1. I needed to modify kitl_x86.c, which is physically located in this folder on my workstation: C:\WINCE600\PLATFORM\COMMON\src\x86\COMMON\kitl\kitl_x86.c I tried to edit the file from within Platform Builder...I see the file in the Solution Explorer tree, under: Solution>OSDesign>C:/WINCE600>PLATFORM>COMMON>src>x86>COMMON>kitl>base>Sourc e files The file name is displayed as "../kitl_x86.c". I can edit the file in the IDE, but I can't save it. As usual, I searched the online Microsoft documentation for PB for 90 minutes, got a huge headache, lost my patience, and then just used Notepad to edit and save the file directly. (It worked like a charm!) Presumably this is the wrong way to edit the file. What's the preferred way? Do I need to somehow clone/copy this file to a "Private" folder in PB, where I can make my tweaks, so that PB will know of my changes and then build my tweaked copy into my OS image? If you can point me at the MS documentation that actually explains how to do this, that would suffice. Thanks a heap, David K Tag: OsAxsHwTrap problem Tag: 106589
  - 8
    - wzcsapi.h in visual studio 2005 Hi all, I am trying to include wzcsapi.h in a VS 2005 project. All I need to do is make the WZCSetInterface and QueryInterface calls and use the INTF_ENTRY struct defined in that header file. Unfortunately when I try to compile the project I am getting errors such as: C:\WINCE600\PUBLIC\COMMON\OAK\INC\wzcsapi.h(117) : error C2146: syntax error : missing ';' before identifier 'pEapExtensionInfo' I presume I am doing something wrong with the environment. There are a few structures used in the wzcsapi.h that the compiler seems to be unable to resolve a declaration for. i.e. EAP_EXTENSION_INFO. Any ideas? Thanks. Tag: OsAxsHwTrap problem Tag: 106582
  - 9
    - KITL only working in Polling Mode (CE 6.0 on an x86 CEPC) Sorry, this post is long. I've successfully built a Windows CE 6.0 OS for my x86 "CEPC", and can download it to my target successfully over ethernet. I can run my simple "Hello World" applications on the target with no problem. However, I have been able get the KITL debugger to work in "Polling Mode" only. (To do that, I modified the kitl_x86.c file to add the OAL_KITL_FLAGS_POLL to the pKitlArgs->flags setting in the InitKitlEtherArgs() function.) If I try to use the default "Interrupt Mode" (that is, without setting the _POLL flag), then my OS image will hang during the booting stage, with a repeating sequence (every 8 seconds) of 16 ethernet UDP packets being sent from the target to the host, which never seem to get acknowledged by PB. Each UDP packet's data payload starts with "EDBG". Here are the last several messages that are received over the serial connection to the target: = = = = = = = = = <<<EARLIER MESSAGES SNIPPED>>> EDBG:NE2000Init using I/O range at 0x00000300 EDBG:NE2000:HWRamTest: srambase: 0x00004000, sramsize: 0x00004000, pstart: 0x46 Ne2kDbg:: HWSetMCRegs():: Set all to 0x00 -EDBG:NE2000Init x86KitlCreateName: Using Device Name 'CEPCLS53401' OALKitlCreateName: Using Device Name 'CEPCLS53401' KITL: *** Device Name CEPCLS53401 *** KITL: using sysintr 0x1A KITL: DHCP get/renew device IP: 1 VBridge:: built on [Sep 6 2006] time [19:21:34] VBridgeInit()...TX = [16384] bytes -- Rx = [16384] bytes Tx buffer [0xA0C18500] to [0xA0C1C500]. Rx buffer [0xA0C1C520] to [0xA0C20520]. VBridge:: NK add MAC: [0-40-5-6C-D0-99] Connecting to Desktop KITL: Connected host IP: 1 Port: 1419 KeyIndex 0 = -1 KeyIndex 1 = -1 KeyIndex 2 = -1 KeyIndex 3 = -1 KeyIndex 4 = -1 KeyIndex 5 = -4194305 KeyIndex 6 = -4194305 KeyIndex 7 = -1 +KITLRegisterDfltClient, service:0 +KITLRegisterDfltClient, service:1 Waiting for service 'DBGMSG' to connect..., fUseSysCalls = 0 ProcessAdminMsg: Receive Config message for service DBGMSG ProcessAdminMsg: Receive Config message for service PPSH ProcessAdminMsg: Receive Config message for service DBGMSG !Received config for unrecognized service KDBG ProcessAdminMsg: Receive Config message for service DBGMSG ProcessAdminMsg: Receive Config message for service PPSH !Received config for unrecognized service KDBG !Received config for unrecognized service KDBG +KITLRegisterDfltClient, service:2 ProcessAdminMsg: Receive Config message for service KDBG ProcessAdminMsg: Receive Config message for service KDBG KdpDeleteBreakpoint: Invalid handle KdpDeleteBreakpoint: Invalid handle <<<THE ABOVE MESSAGE REPEATS ABOUT 160 TIMES>>> KITL: Leaving polling mode... 0x80C08060 KITL Checking client registrations +RegisterClientPart2: Id 0x00000000 KITL Timer thread started, (hTh: 0x00520002, pTh: 0x83FE3C18) Closing Handle of Timer Thread -RegisterClientPart2 returns 1 +RegisterClientPart2: Id 0x00000001 -RegisterClientPart2 returns 1 KITL Creating IST KITL Interrupt thread started (hTh: 0x005A0002, pTh: 0x83FC1414), using SYSINTR 26 Enabling adapter ints... Reserve KITL IRQ: No IRQ reserved, KITL NIC IRQ may be shared with other devices. 0x680002 (0x102): KITLSend(0): Timed out waiting for ack (AckExpected: 74, TxSeq: 90) 0x930002 (0x102): KITLSend(0): Timed out waiting for ack (AckExpected: 74, TxSeq: 90) 0x680002 (0x102): KITLSend(0): Timed out waiting for ack (AckExpected: 74, TxSeq: 90) <<<THE ABOVE MESSAGE REPEATS FOREVER, ABOUT EVERY 10 SECONDS>>> = = = = = = = = And here are the last several lines of Debug Output text from the Visual Studio window: = = = = = = = = <<<EARLIER MESSAGES SNIPPED>>> 4294767914 PID:400002 TID:680002 OSAXST1: >>> Loading Module 'romfsd.dll' (0x83FA024C) at address 0xC01B0000-0xC01B6000 in Process 'NK.EXE' (0x80C23C80) 4294767928 PID:400002 TID:680002 FSDMGR!MountTable_t::RegisterVolumeName: Registered "ROM" at index 3 4294767929 PID:400002 TID:680002 FSDMGR!MountTable_t::RegisterVolume: Registered volume at index 3 (Name="ROM", MountFlags=0x71) 4294767992 PID:400002 TID:680002 Succeeded on CheckFile 4294767993 PID:400002 TID:680002 RestoreFile(0x008f0003) called fDelete = TRUE 4294768145 PID:400002 TID:680002 FSDMGR!STOREMGR_StartBootPhase BootPhase=0 (PrevBootPhase=-1) 4294768146 PID:400002 TID:680002 FSDMGR: File security disabled. 4294768147 PID:400002 TID:680002 FSDMGR!AutoLoadFileSystems: CurrentBootPhase=0, LoadFlags=1 4294768148 PID:400002 TID:680002 FSDMGR!AutoLoadFileSystem: CurrentBootPhase=0, RootKey=System\StorageManager\AutoLoad, FileSystem_t=ObjectStore 4294768149 PID:400002 TID:680002 FILESYS: RAM File System FSD_MountDisk registering folder "Object Store" 4294768150 PID:400002 TID:680002 FSDMGR!MountTable_t::RegisterVolumeName: Registered "Object Store" at index 4 4294768150 PID:400002 TID:680002 FSDMGR!MountTable_t::RegisterVolume: Registered volume at index 4 (Name="", MountFlags=0x46) 4294768152 PID:400002 TID:680002 PCIReg(key: Drivers\BuiltIn\PCI\Instance\KITL, device: 0/3/0) 4294768175 PID:400002 TID:680002 Override Serial Driver: serial debug output selected on COM port 1, disabling serial driver for that port. 4294768175 PID:400002 TID:680002 Override Serial Driver: No COM port selected for serial KITL transport, no override necessary. 4294768176 PID:400002 TID:680002 FSDMGR!STOREMGR_StartBootPhase BootPhase=1 (PrevBootPhase=0) 4294768176 PID:400002 TID:680002 FSDMGR!AutoLoadFileSystems: CurrentBootPhase=1, LoadFlags=1 <<<THE ABOVE MESSAGE IS THE LAST MESSAGE THAT APPEARS>>> = = = = = = = = I have confirmed that the Target>Connectivity Options>Kernel Service Map>Debugger is set to KdStub, and the Download and Transport settings are set to Ethernet. Perhaps my target system has some KITL interrupt/IST issue, perhaps related to SYSINTR 26? Or perhaps PB is hanging for some different reason, and it stops acknowledging the packets sent by the target? I had read in other postings that it could be an MTU size issue on my development workstation; I haven't investigated this issue yet. But it's interesting that if I switch to Polling Mode, everything starts up fine and I can execute my applications on my CE target. Has anyone seen this problem and then been able to get KITL working in Interrupt Mode? I can live with Polling Mode for now (in fact, I don't even know if Interrupt Mode will improve the performance of my system, since I've never seen it work before), but I wondered if anyone has found a fix for this problem. As always, any guidance is greatly appreciated! David K Tag: OsAxsHwTrap problem Tag: 106580
  - 10
    - VS2005 with CE 5.0 SDK I've searched and search and haven't been able to come up with a definitive answer. Does anyone know why a Platform Builder CE 5.0 generated SDK does not show up in VS2005 as a possible device when creating a Smartdevice application? I have a custom CE 5.0 ARM device that I would like to create an SDK and give to an application developer. He would like to use VS2005. Is this possible? Do I need to do anything to my 5.0 OS? Any information or pointer in the right direction would be appreciated. -- Thanks, George Tag: OsAxsHwTrap problem Tag: 106577
  - 11
    - My Subproject apps aren't being copied to the Release directory when OS is built After one full week of work, I have successfully built a Win CE 6.0 OS for my x86 "CEPC". (I'm using an old PC motherboard as my "target" device). I'm able to download the new OS image to my target via ethernet, and Windows Explorer comes up fine with the display, keyboard and mouse working well. (A beer bash celebration is being held this afternoon. :-D ) Now I have a minor issue that is more of an annoyance: I'm using VS2005 SP1 with PB SP1. I wrote two simple Subproject applications in my OS Design Project; one is named "ConsoleApp1" and the other "WinApp1". They both build fine separately (by right-clicking on each subproject and selecting "Rebuild" from the pop-up menu). But when I do a "Rebuild Solution" to build the entire OS and my subprojects, they're not being included in my Release directory, even though the "Project>Properties>Subproject Image Settings" are set to include those subprojects in the Build and the Image. During the makeimage phase, I get a fatal error that says it cannot find "ConsoleApp1.EXE" file in the Release directory, and it halts the build. Seems like the makeimage phase deletes the ConsoleApp1.EXE and WinApp1.EXE files from the Release directory, and then it complains that it can't find them. As a workaround to this problem, I set the "Build" setting in "Project>Properties>Subproject Image Settings" to "Excluded", leave the "Image" setting at "Included", and then manually copy the EXE files to the Release Folder. Now when I do a Rebuild Solution, it includes the EXEs in with the OS image, and I can execute them just fine on the target. Am I doing something wrong, or is this the way everyone else gets their applications to be included in the OS image? David K Tag: OsAxsHwTrap problem Tag: 106576
  - 12
    - pci bus registers reading Dear all, Wince: 6.0 Processor: intel mobile Chipset : 82855GME and 82801DBM i already raised a question reg this and Rob told to try Halgetbusdata, but i am not getting it here are my codes anyone help me where i am wrong, this is a console application. I am new to this driver development without this i couldnt able to proceed further. Please help me.... I just wanted to access the registers in the PCI with some bus/function/device #include "stdafx.h" #include <ceddk.h> #define SMBUS_BUS_NO 0x0 #define SMBUS_DEVICE_NO 0x31 #define SMBUS_FUNCTION_NO 0x3 int _tmain(int argc, TCHAR *argv[], TCHAR *envp[]) { int ret; printf("In SMBus function"); PCI_SLOT_NUMBER slotNumber; PCI_COMMON_CONFIG smbus_pci_config; slotNumber.u.AsULONG = 0; slotNumber.u.bits.DeviceNumber = SMBUS_DEVICE_NO; slotNumber.u.bits.FunctionNumber = SMBUS_FUNCTION_NO; ret=HalGetBusData(PCIConfiguration, SMBUS_BUS_NO, slotNumber.u.AsULONG, &smbus_pci_config, sizeof(smbus_pci_config)); printf("In SMbus\n Vendor ID = %0x\n Device ID = %0x\n",smbus_pci_config.VendorID,smbus_pci_config.DeviceID); printf("In SMbus\ndecimal Vendor ID = %d\n Device ID = %d\n",smbus_pci_config.VendorID,smbus_pci_config.DeviceID); printf("\nret=%d\n",ret); return 0; } in sources file i added TARGETLIBS= \ $(_WINCEROOT)\PLATFORM\xxx\ceddk.lib (without this it is reporting an error that Halgetbusdata is not defined) Tag: OsAxsHwTrap problem Tag: 106560
  - 13
    - CMD can not start. Low on memory or too many console windows open. Looks like a well known problem, still... I have a Serial Port driver for my custom platform. When i redirect the console output to the COM1 serial port it throws an error saying: "CMD can not start. Low on memory or too many console windows open. Please close some console applications and try again." None of the applications that I have written uses/opens COM1. The only place where I try to use COM1 is by specifying the registry : [HKEY_LOCAL_MACHINE\Drivers\Console] "OutputTo"=dword:1 "COMSpeed"=dword:115200 My OS design includes the comand processor and Console window. Including/exclusing the console window doesnt make any difference. I have all the WinCE updates installed and had a clean build sysgen for my platform. Still it thows the same error message. I found a FIX posted at http://support.microsoft.com/kb/930643. but dont know where to find Wincepb60-070125-kb930643-armv4i.msi ? I have OEMRead/write DebugByte implemented in the OAL which use the same UART port but i reset everything in my HWInit for COM driver. I tried using these OEM implementation and use the following registry settings to work on console but doesnt work for some reason. [HKEY_LOCAL_MACHINE\Drivers\Console] "OutputTo"=dword:-1 // Directs to DebugPort "COMSpeed"=dword:115200 Comments and suggestions welcome. Tag: OsAxsHwTrap problem Tag: 106559
  - 14
    - Reading SMS text from Inbox hi.. i am trying to read sms text from Inbox of the mobile .. i found some of the documents suggesting that we need to use sms.dll for this purpose, but i could not able to even declare an object like "smsopen " i am using Windows Mobile 2003 SDK with VS2005 as IDE. if any one have the link or the document regarding this please do send me. please suggest me how to proceed.. Thanks in advance Regards vishnu Tag: OsAxsHwTrap problem Tag: 106558
  - 15
    - SYNC beteen kernel and driver As i known that API calling in OAL are not allowed. Now my problem is OAL need to sync with my driver. So my idea is to put all the HW register operation in one function(in driver), and use CriticalSection to protect. OAL will link my driver's Lib and call this function. can anybody tell me whether this method works. if not please advise some. thanks a lot ! Tag: OsAxsHwTrap problem Tag: 106557
  - 16
    - Audio dma related query Hi, I am using TLV320AIC33 audio codec in my handset (pxa270,wince 5.0). I got the driver source code from T.I (Texas Instrument itself).I am using I2s(DMA) for data transfer and SPI for control transfer.ADC and DAC are set to 44.100KHz and I2s is at 16 bit.mclk=44.1Khz,bitclk=44.1khz,wclk=2.83mhz. My speaker is working well.But My problem is that my mic is not woking well.i am getting the following message ******* pwh is NULL ******** after (1/4 of recording time).i am using the wavrec application..the cose snippet is if (pwh != NULL && pwh->dwBytesRecorded >= pwh->dwBufferLength) pwh = pwh->lpNext; if (pwh == NULL) { RETAILMSG(1, (TEXT("********** pwh is NULL **************"))); } please help me. Tag: OsAxsHwTrap problem Tag: 106556
  - 17
    - Audio dma related query Hi, I am using TLV320AIC33 audio codec in my handset (pxa270,wince 5.0). I got the driver source code from T.I (Texas Instrument itself).I am using I2s(DMA) for data transfer and SPI for control transfer.ADC and DAC are set to 44.100KHz and I2s is at 16 bit.mclk=44.1Khz,bitclk=44.1khz,wclk=2.83mhz. My speaker is working well.But My problem is that my mic is not woking well.i am getting the following message ******* pwh is NULL ******** after (1/4 of recording time).i am using the wavrec application..the cose snippet is if (pwh != NULL && pwh->dwBytesRecorded >= pwh->dwBufferLength) pwh = pwh->lpNext; if (pwh == NULL) { RETAILMSG(1, (TEXT("********** pwh is NULL **************"))); } please help me. Tag: OsAxsHwTrap problem Tag: 106555
  - 18
    - Audio dma related query Hi, I am using TLV320AIC33 audio codec in my handset (pxa270,wince 5.0). I got the driver source code from T.I (Texas Instrument itself).I am using I2s(DMA) for data transfer and SPI for control transfer.ADC and DAC are set to 44.100KHz and I2s is at 16 bit.mclk=44.1Khz,bitclk=44.1khz,wclk=2.83mhz. My speaker is working well.But My problem is that my mic is not woking well.i am getting the following message ******* pwh is NULL ******** after (1/4 of recording time).i am using the wavrec application..the cose snippet is if (pwh != NULL && pwh->dwBytesRecorded >= pwh->dwBufferLength) pwh = pwh->lpNext; if (pwh == NULL) { RETAILMSG(1, (TEXT("********** pwh is NULL **************"))); } please help me. Tag: OsAxsHwTrap problem Tag: 106554
  - 19
    - Audio dma related query Hi, I am using TLV320AIC33 audio codec in my handset (pxa270,wince 5.0). I got the driver source code from T.I (Texas Instrument itself).I am using I2s(DMA) for data transfer and SPI for control transfer.ADC and DAC are set to 44.100KHz and I2s is at 16 bit.mclk=44.1Khz,bitclk=44.1khz,wclk=2.83mhz. My speaker is working well.But My problem is that my mic is not woking well.i am getting the following message ******* pwh is NULL ******** after (1/4 of recording time).i am using the wavrec application..the cose snippet is if (pwh != NULL && pwh->dwBytesRecorded >= pwh->dwBufferLength) pwh = pwh->lpNext; if (pwh == NULL) { RETAILMSG(1, (TEXT("********** pwh is NULL **************"))); } please help me. Tag: OsAxsHwTrap problem Tag: 106553
  - 20
    - VS2005+Mobile SDK6+PB5 not work well: XML parsing error Hi groups, VS2005 + Mobile SDK 6 work well on my PC, but after installing platform builder 5.0, VS2005 shows â??XML parsing errorâ?? when open *.sln. We reinstall VS2005, Mobile SDK and platform builder, but the problem is the same. How to sovle the problem? Regards, Clare ================================================= The error dialogue shows as follow: The following error has occurred during XML parsing: File: D:\Works\cvshome\codec-20070820-dshow\videc\mpvdec_exe.vcproj Line: 200 Column: 5 Error Message: Fatal error The file 'D:\Works\cvshome\codec-20070820-dshow\videc\mpvdec_exe.vcproj' has failed to load. ================================================= The Line:200 of mpvdec_exe.vcproj are <DeploymentTool ForceDirty="-1" RemoteDirectory="" RegisterOutput="0" AdditionalFiles="" /> ================================================= Tag: OsAxsHwTrap problem Tag: 106552
  - 21
    - CE5.0 SD bus driver of SD V2.0 has memory leakage The bug is found during the development of a CE5.0 device with SDIO Wifi in the following folder: C:\WINCE500\PUBLIC\COMMON\OAK\DRIVERS\SDCARD\SDBUS Such that the SDIO Wifi is implemented to have SD card insert / removal events for activiate / deactivate the Wifi. Everytime SD card insert and removal events executed, the device lost 1.7KB memory. Tag: OsAxsHwTrap problem Tag: 106551
  - 22
    - Insert an intermediate driver on the top of the serial port driver. All, In WinCE, you can install an intermediate driver on the top of the NDIS miniport driver. Can we do the similar thing for serial port driver? Tag: OsAxsHwTrap problem Tag: 106550
  - 23
    - MEDC 2007 content on CD/DVD This probably isn't the best place to ask this question, but it'll probably get the most eyeballs from other MEDC attendees. Did anyone else get the content CD/DVD from MEDC 2007? I haven't received mine yet, and I wonder if I'm the only one... -Dan. Tag: OsAxsHwTrap problem Tag: 106544
  - 24
    - Installing Device Driver in Kernel Mode Hello, I am porting an device driver from CE 4.20 to 6.0 and need to install the driver as a Kernel mode instead of User Mode. I have been wrestling with this for a few days now and can not find any information on how to do this. I need this device driver running in kernel mode because about every 100 mSecs we make around 25 - 30 DeviceIOControl calls into the driver to read some data of a PCI bus. With the driver running in User Mode the system runs for a while and then just reboots. I seem periodic failures error codes of 0x80070057 (The parameter is incorrect.), I am guessing that the driver while running in UserMode can not handle this amount of traffic from what I have read. I have tried changing the "Flags" registry entry for the driver to have the without success. Any help that can be given would be great. Thank you, David Paradis Tag: OsAxsHwTrap problem Tag: 106541
  - 25
    - RAS Difference between CE 5.0 and XP Hello, I am trying to solve a problem that I am having using RAS for CE 5.0. I am using a dial up satellite modem and it is VERY slow. I can connect to a remote network (dial up) using XP. At this point I can do anything (albeit taking a horrible amount of time). On my CE device, I can get the RAS dial up to connect. Then Nothing! I am attempting to do an "InternetConnect" call in order to FTP some information. This call always returns a 12002 (timeout). I have set up all the available timeouts (using InternetSetOption) to 5 minutes. I don't think the problem is in my InternetConnect function itself as I can connect using a GSM modem without any problems. The difference between the two is primarily speed. What might the settings be in XP that makes it work? Might there be a comparable setting in CE? Please let me know if you have any insight on this extremely frustrating problem. Thank you, Craig Tag: OsAxsHwTrap problem Tag: 106538
- Next
  - 1
    - GetDescriptor does not return with USB 2.0 devices Hello, I'm trying to make USB 2.0 devices work on a CEPC with EHCI/OHCI Host controllers. I've installed all the USB related QFEs. If I insert a USB 1.1 flash key, EHCI passes control to OHCI and all works fine. In case of a 2.0 device, I can see debug strings up to: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_GET_DEVICE_DESCRIPTOR_TEST, failures = 0 +CHub(Root tier 0)::GetDescriptor - address = 0, Type = 1, Index = 0, Size = 8 GetDescriptor does not return at all, due to a busy pipe. After other messages, I see this block of lines repeating forever: CQTransfer::IsTransferDone (this=0x35f820,id=0x0) CQTransfer::IsTransferDone (this=0x35f820) return 0 CPipe::CheckForDoneTransfersThread - #pipes still busy = 1 CPipe::CheckForDoneTransfersThread - #pipes to check = 1 Have you ever seen a similar situation? At the end of my post you will find a more detailed debug output. Thank you in advance, Panino ------- [..] +CRootHub::ResetAndEnablePort - port = 2 Root hub, after reset & enable, port 2 portsc = 0x1005 -CRootHub::ResetAndEnablePort - port = 2, returning 1 +CRootHub::GetStatus - port = 2 -CRootHub::GetStatus - port = 2, returing BOOL 1 CHub(Root tier 0)::HubStatusChangeThread - device attached on port 2 +CHub(Root tier 0)::AttachDevice - port = 2, fIsLowSpeed = 0 +CDeviceGlobal::ReserveAddress -CDevice::ReserveAddress, returning rAddress 1, success = 1 CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_OPENING_ENDPOINT0_PIPE, failures = 0 +CPipe::CPipe -CPipe::CPipe +CQueuedPipe::CQueuedPipe -CQueuedPipe::CQueuedPipe +CControlPipe::CControlPipe -CControlPipe::CControlPipe +CControlPipe::OpenPipe +CPipe::AddToBusyPipeList - new pipe(Control) 0x33370, pri 0 -CPipe::AddToBusyPipeList - new pipe(Control) 0x33370, pri 0, returning BOOL 1 -CControlPipe::OpenPipe CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_USING_ADDRESS0, failures = 0 CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_RESET_AND_ENABLE_PORT, failures = 0 +CRootHub::ResetAndEnablePort - port = 2 Root hub, after reset & enable, port 2 portsc = 0x1005 -CRootHub::ResetAndEnablePort - port = 2, returning 1 CPipe::CheckForDoneTransfersThread - #pipes to check = 1 -CPipe(Control)::ScheduleTransfer - Schedule called during QHead Busy or nothing to schedule! CPipe::CheckForDoneTransfersThread - #pipes still busy = 1 CPipe::CheckForDoneTransfersThread - #pipes to check = 1 -CPipe(Control)::ScheduleTransfer - Schedule called during QHead Busy or nothing to schedule! CPipe::CheckForDoneTransfersThread - #pipes still busy = 1 CPipe::CheckForDoneTransfersThread - #pipes to check = 1 -CPipe(Control)::ScheduleTransfer - Schedule called during QHead Busy or nothing to schedule! CPipe::CheckForDoneTransfersThread - #pipes still busy = 1 CPipe::CheckForDoneTransfersThread - #pipes to check = 1 42-CPipe(Control)::ScheduleTransfer - Schedule called during QHead Busy or nothing to schedule! CPipe::CheckForDoneTransfersThread - #pipes still busy = 1 CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_GET_DEVICE_DESCRIPTOR_TEST, failures = 0 +CHub(Root tier 0)::GetDescriptor - address = 0, Type = 1, Index = 0, Size = 8 +CControlPipe::IssueTransfer, address = 0 +CPipe(Control)::IssueTransfer, address = 0 +CControlPipe::AreTransferParametersValid -CControlPipe::AreTransferParametersValid, returning BOOL 1 CTransfer::Init (this=0x35f820,id=0x0) CQTransfer::Init (this=0x35f820,id=0x0),m_pAllocatedForControl=0x4a9000,m_pAllocatedForClient=0x4a9020 CQTransfer::AddTransfer (this=0x35f820,id=0x0) -CPipe(Control)::IssueTransfer - address = 0, returing HCD_REQUEST_STATUS 1 -CControlPipe::::IssueTransfer - address = 0, returing HCD_REQUEST_STATUS 1 CPipe::CheckForDoneTransfersThread - #pipes to check = 1 CQTransfer::IsTransferDone (this=0x35f820,id=0x0) CQTransfer::IsTransferDone (this=0x35f820) return 0 CPipe::CheckForDoneTransfersThread - #pipes still busy = 1 CPipe::CheckForDoneTransfersThread - #pipes to check = 1 CQTransfer::IsTransferDone (this=0x35f820,id=0x0) CQTransfer::IsTransferDone (this=0x35f820) return 0 [..] Tag: OsAxsHwTrap problem Tag: 106525
  - 2
    - Hardware Access from Application We have a custom platform with a lot of special-purpose hardware on it. Under CE 6.0, all of the hardware access must be done by a device driver. I wrote one to wrap our hardware, but it sure would be better for us if our application could access the hardware directly. Is there a way to do this in WinCE 6.0? Could I write a device driver that would map the physical addresses to a calling process's virtual address space? (if so, what API would do that for me?) Or, could I somehow trick the User Mode Driver Framework into thinking that my application is a driver? thanks. Tag: OsAxsHwTrap problem Tag: 106524
  - 3
    - mount/format nand flash FATFS-partition problems Hi, I'm trying to create and mount a FATFS partition from NAND flash (CE 6), as an "external drive" so to speak. In control panel -> storage manager I see a DSK1 partition. When adding files to the mounted folder the files are actually put in flash (Checked from outside of OS). However when rebooting the system, this partition is never detected so at every reboot the entire flash is reformated and a new DSK1 partition is created. If registry settings autoformat and autopartition is '0' it simply does not mount anything. Currently I have the following settings in my platform.reg [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\MSFlash] "Prefix"="DSK" "Dll"="nand.DLL" "Index"=dword:1 "Order"=dword:10 "MemBase"=dword:0C000000 "MemLen"=dword:00000010 "Gpio"=dword:4A "IClass"="{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" "Profile"="MSFlash" [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles] "DefaultFileSystem"="FATFS" "PartitionDriverName"="MSPART" [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash] "AutoMount"=dword:1 "AutoPart"=dword:1 "AutoFormat"=dword:1 "MountFlags"=dword:0 "DriverPath"="Drivers\\BuiltIn\\MSFlash" "LoadFlags"=dword:1 "BootPhase"=dword:0 "Order"=dword:0 "MountAsROM"=dword:1 "Name"="NAND FLASH" "EnableCache"=dword:0 "Folder"="john" "Mountpermanent"=dword:1 [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash\FATFS] "MountAsBootable"=dword:0 "MountAsRoot"=dword:0 "EnableWriteBack"=dword:0 "CheckForFormat"=dword:0 "ForceWritethrough"=dword:1 "EnableCache"=dword:0 "Paging"=dword:0 "DisableAutoScan"=dword:0 "DisableAutoFormat"=dword:0 "Util"="fatutil.dll" "CacheSize"=dword:0 "FriendlyName"="FAT FileSystem" "Dll"="exfat.dll" However I'm starting to doubt that the problem is in the registry settings. Here is some debug output. 5555 PID:400002 TID:be0002 OSAXST1: >>> Loading Module 'nand.dll' (0x85F510C0) at address 0xC09E0000-0xC09FF000 in Process 'NK.EXE' (0x84F33AA0) 5562 PID:400002 TID:be0002 FMDHOOK_HookInterface UNIMPLEMENTED (STUBBED) 5803 PID:400002 TID:be0002 FLASHDRV.DLL:BuildupMappingInfo() - Enter. 9741 PID:400002 TID:be0002 DeviceFolder::LoadDevice(Drivers\BuiltIn \MSFlash) last 4231 Ticks 9748 PID:400002 TID:c50002 DEVICE!RegReadActivationValues RegOpenKeyEx(Notify) returned 2. 9750 PID:400002 TID:c50002 DEVICE!I_ActivateDeviceEx: can't find all required activation values in 'Notify' 9761 PID:400002 TID:9f0002 FSDMGR!MountStore: Attaching new storage device "DSK1:" 9771 PID:400002 TID:9f0002 FSDMGR!StoreDisk_t::OpenDisk(0xD004AC50) DeviceInfo Class(0x00000001) Flags(0x00000005) Type(0x00000002) Profile(MSFlash) 9774 PID:400002 TID:9f0002 FSDMGR!DumpRegKey: Dumping registry for key System\StorageManager\Profiles PB Debugger Loaded symbols for 'C:\WINCE600\OSDESIGNS\WIPOQ\WIPOQ \RELDIR\WIPOQ_ARMV4I_DEBUG\MSPART.DLL' 9775 PID:400002 TID:9f0002 AutoMount = 00000001 9778 PID:400002 TID:9f0002 AutoPart = 00000000 9779 PID:400002 TID:9f0002 AutoFormat = 00000000 9781 PID:400002 TID:9f0002 MountFlags = 00000000 9783 PID:400002 TID:9f0002 DefaultFileSystem = FATFS 9784 PID:400002 TID:9f0002 PartitionDriverName = MSPART 9786 PID:400002 TID:9f0002 Folder = Mounted Volume 9788 PID:400002 TID:9f0002 ActivityEvent = PowerManager/ ActivityTimer/SystemActivity 9791 PID:400002 TID:9f0002 FSDMGR!DumpRegKey: Dumping registry for key MSFlash 9792 PID:400002 TID:9f0002 AutoMount = 00000001 9794 PID:400002 TID:9f0002 AutoPart = 00000001 9794 PID:400002 TID:9f0002 AutoFormat = 00000001 9797 PID:400002 TID:9f0002 MountFlags = 00000000 9798 PID:400002 TID:9f0002 DriverPath = Drivers\BuiltIn\MSFlash 9800 PID:400002 TID:9f0002 LoadFlags = 00000001 9802 PID:400002 TID:9f0002 BootPhase = 00000000 9803 PID:400002 TID:9f0002 Order = 00000000 9805 PID:400002 TID:9f0002 MountAsROM = 00000001 9807 PID:400002 TID:9f0002 Name = NAND FLASH 9809 PID:400002 TID:9f0002 EnableCache = 00000000 9810 PID:400002 TID:9f0002 Folder = john 9813 PID:400002 TID:9f0002 Mountpermanent = 00000001 9846 PID:400002 TID:9f0002 OSAXST1: >>> Loading Module 'mspart.dll' (0x85F5199C) at address 0xC05E0000-0xC05EF000 in Process 'NK.EXE' (0x84F33AA0) 9853 PID:400002 TID:680002 FILESYS: Waiting for bootable file system to be mounted. 9858 PID:400002 TID:680002 FILESYS: Device started. Boot file system ready. 9861 PID:400002 TID:680002 FSREG: Unable to read value "SystemHiveInitialSize" under HKEY_LOCAL_MACHINE\init\BootVars 9877 PID:400002 TID:680002 FSVOL: Opening existing volume 9888 PID:400002 TID:680002 FSVOL: Volume heap already initialized 9889 PID:400002 TID:680002 FSREG: Mounted ROM portion of system hive 9891 PID:400002 TID:680002 FILESYS: Loading system hive from \Documents and Settings\system.hv. 9893 PID:400002 TID:680002 +OEMIoControl(0x10100c4, 0xd00df868, 4, 0xd00df848, 4, 0x0) 9894 PID:400002 TID:680002 OEMIoControl: Unsupported Code 0x10100c4 - device 0x0101 func 49 9896 PID:400002 TID:680002 -OEMIoControl(rc = 0) 9902 PID:400002 TID:680002 FSREG: Mounting clean system hive 9903 PID:400002 TID:680002 BuildPath: Documents and Settings 9910 PID:400002 TID:680002 FSVOL: Creating new volume (size=28672 bytes) 9932 PID:400002 TID:680002 FSVOL: Initializing volume heap 10134 PID:400002 TID:680002 FSREG: Taking down boot registry. Any open keys will be invalid. 10432 PID:400002 TID:680002 FILESYS: Registry in place. 10434 PID:400002 TID:680002 +OEMIoControl(0x10100c4, 0xd00df514, 4, 0xd00df510, 4, 0x0) 10436 PID:400002 TID:680002 OEMIoControl: Unsupported Code 0x10100c4 - device 0x0101 func 49 10437 PID:400002 TID:680002 -OEMIoControl(rc = 0) 10641 PID:400002 TID:680002 INITOBJ: Syntax error at initobj.dat: 244, ignoring line 10652 PID:400002 TID:680002 FSVOL: Using system database volume "\Documents and Settings\default.vol" 10655 PID:400002 TID:680002 BuildPath: Documents and Settings 10658 PID:400002 TID:680002 +OEMIoControl(0x10100c4, 0xd00df9ac, 4, 0xd00df9a8, 4, 0x0) 10659 PID:400002 TID:680002 OEMIoControl: Unsupported Code 0x10100c4 - device 0x0101 func 49 10661 PID:400002 TID:680002 -OEMIoControl(rc = 0) 10666 PID:400002 TID:680002 FSVOL: Creating new volume (size=28672 bytes) 10688 PID:400002 TID:680002 FSVOL: Initializing volume heap PB Debugger Loaded symbols for 'C:\WINCE600\OSDESIGNS\WIPOQ\WIPOQ \RELDIR\WIPOQ_ARMV4I_DEBUG\SHELL.EXE' 10809 PID:400002 TID:680002 FSREG: Unable to read value "RequireCertMod" under HKEY_LOCAL_MACHINE\init\BootVars 10842 PID:400002 TID:680002 FSREG: Logging in default user. 10843 PID:400002 TID:680002 FSREG: Unable to read value "DefaultUser" under HKEY_LOCAL_MACHINE\init\BootVars 10845 PID:400002 TID:680002 SetCurrentUser: Logging out (nobody), logging in default 10849 PID:400002 TID:680002 BuildPath: Documents and Settings 10851 PID:400002 TID:680002 BuildPath: Documents and Settings \default 10855 PID:400002 TID:680002 FSREG: Mounting ROM portion of user hive 10871 PID:400002 TID:680002 FSVOL: Opening existing volume 10882 PID:400002 TID:680002 FSVOL: Volume heap already initialized 10884 PID:400002 TID:680002 Mounting user hive from \Documents and Settings\default\user.hv 10892 PID:400002 TID:680002 FSREG: Mounting clean user hive 10897 PID:400002 TID:680002 FSVOL: Creating new volume (size=28672 bytes) 10919 PID:400002 TID:680002 FSVOL: Initializing volume heap 11164 PID:400002 TID:680002 +OEMIoControl(0x10100d0, 0x0, 0, 0xd00df384, 16, 0xd00df380) 11165 PID:400002 TID:680002 OEMIoControl: Unsupported Code 0x10100d0 - device 0x0101 func 52 11168 PID:400002 TID:680002 -OEMIoControl(rc = 0) 11169 PID:400002 TID:680002 +OEMIoControl(0x10100f8, 0x0, 0, 0xd00df394, 8, 0xd00df39c) 11170 PID:400002 TID:680002 -OALIoCtlHalGetHWEntropy(rc = 1) PB Debugger Loaded symbols for 'C:\WINCE600\OSDESIGNS\WIPOQ\WIPOQ \RELDIR\WIPOQ_ARMV4I_DEBUG\TOOLHELP.DLL' 11171 PID:400002 TID:680002 -OEMIoControl(rc = 1) 11386 PID:400002 TID:680002 FSDMGR!STOREMGR_StartBootPhase BootPhase=2 (PrevBootPhase=1) 11388 PID:400002 TID:680002 FSDMGR!AutoLoadFileSystems: CurrentBootPhase=2, LoadFlags=1 11725 PID:400002 TID:9f0002 FSDMGR!LoadPartitionDriver: Loading partition driver mspart.dll hModule=85F5199C 11731 PID:400002 TID:9f0002 FSDMGR!StoreDisk_t::MountStore: Opened the store "DSK1:" hStore=0xD004E3D0 11733 PID:400002 TID:9f0002 FSDMGR!StoreDisk_t::MountStore: Geometry: NumSec=118144 BytesPerSec=2048 FreeSec=0 BiggestCreatable=0 11839 PID:400002 TID:680002 Initializing Database 11886 PID:400002 TID:680002 DB:Validation: Name already exists DB_notify_events 11887 PID:400002 TID:680002 DB:CeCreateDatabase failed 11904 PID:400002 TID:680002 Filesystem initialized! PB Debugger Loaded symbols for 'C:\WINCE600\OSDESIGNS\WIPOQ\WIPOQ \RELDIR\WIPOQ_ARMV4I_DEBUG\UDEVICE.EXE' 11924 PID:400002 TID:680002 FILESYS: Waiting for kernel to be ready to launch apps 12049 PID:400002 TID:630002 InitMUI: Langs=409 0 0 0 0 0 12164 PID:400002 TID:680002 FS: Creating signal event SYSTEM/ DevMgrApiSetReady 12167 PID:400002 TID:680002 FS: Creating signal event SYSTEM/ PowerManagerReady 12169 PID:400002 TID:680002 FS: Creating signal event SYSTEM/ GweApiSetReady 12170 PID:400002 TID:680002 FS: Creating signal event ReleaseFSD PB Debugger Loaded symbols for 'C:\WINCE600\OSDESIGNS\WIPOQ\WIPOQ \RELDIR\WIPOQ_ARMV4I_DEBUG\EXFAT.DLL' 12172 PID:400002 TID:680002 FS: Creating signal event system/events/ notify/APIReady PB Debugger Loaded symbols for 'C:\WINCE600\OSDESIGNS\WIPOQ\WIPOQ \RELDIR\WIPOQ_ARMV4I_DEBUG\K.FATUTIL.DLL' PB Debugger Loaded symbols for 'C:\WINCE600\OSDESIGNS\WIPOQ\WIPOQ \RELDIR\WIPOQ_ARMV4I_DEBUG\SOFTKB.DLL' 12175 PID:400002 TID:680002 FS: Creating signal event SYSTEM/ ShellAPIReady 12177 PID:400002 TID:680002 FILESYS: Launching apps 12181 PID:400002 TID:680002 FILESYS: Launching shell.exe 12294 PID:1700002 TID:1710002 OSAXST1: >>> Loading Module 'coredll.dll' (0x85FFA6CC) at address 0x40010000-0x400F0000 in Process 'shell.exe' (0x85FB6E94) PB Debugger Loaded symbols for 'C:\WINCE600\OSDESIGNS\WIPOQ\WIPOQ \RELDIR\WIPOQ_ARMV4I_DEBUG\OLE32.DLL' 12298 PID:1700002 TID:1710002 OSAXST1: >>> Loading Module 'shell.exe' (0x85FB6E94) at address 0x00010000-0x00026000 in Process 'shell.exe' (0x85FB6E94) 14988 PID:1700002 TID:1710002 Heap Statistics at 0x400DE940 15010 PID:400002 TID:1710002 OSAXST1: >>> Loading Module 'toolhelp.dll' (0x85F1051C) at address 0x40180000-0x40186000 in Process 'NK.EXE' (0x84F33AA0) 15014 PID:1700002 TID:1710002 OSAXST1: >>> Loading Module 'toolhelp.dll' (0x85F1051C) at address 0x40180000-0x40186000 in Process 'shell.exe' (0x85FB6E94) 15734 PID:400002 TID:9f0002 FLASHDRV.DLL:BuildupMappingInfo() - Enter. 18108 PID:400002 TID:680002 FILESYS: SignalStarted loop = 1 18109 PID:400002 TID:680002 FILESYS: Boot phase 2 18453 PID:400002 TID:be0002 FSREG: Invalid HKEY 0xd0150090 18479 PID:400002 TID:be0002 DEVICE!InitDevices: Root Key is Drivers \BuiltIn. 18482 PID:400002 TID:be0002 DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\BusPrefix) returned 2 18515 PID:400002 TID:be0002 RootBus::RootBus (ActivateRegPath=Drivers \Active\4294967283) 18664 PID:400002 TID:be0002 ActivateChild: Template reg path is Drivers\BuiltIn\NDIS 18666 PID:400002 TID:be0002 ActivateChild: Template reg path is Drivers\BuiltIn\AFD 18667 PID:400002 TID:be0002 ActivateChild: Template reg path is Drivers\BuiltIn\Ws2Serv 18668 PID:400002 TID:be0002 ActivateChild: Template reg path is Drivers\BuiltIn\SIP PB Debugger Loaded symbols for 'C:\WINCE600\OSDESIGNS\WIPOQ\WIPOQ \RELDIR\WIPOQ_ARMV4I_DEBUG\NOTIFY.DLL' 18671 PID:400002 TID:be0002 ActivateChild: Template reg path is Drivers\BuiltIn\credsvc 18672 PID:400002 TID:be0002 ActivateChild: Template reg path is Drivers\BuiltIn\MSFlash 18674 PID:400002 TID:be0002 ActivateChild: Template reg path is Drivers\BuiltIn\GPIO 18675 PID:400002 TID:be0002 ActivateChild: Template reg path is Drivers\BuiltIn\PPP 18677 PID:400002 TID:be0002 ActivateChild: Template reg path is Drivers\BuiltIn\NDISUIO 18678 PID:400002 TID:be0002 ActivateChild: Template reg path is Drivers\BuiltIn\ZeroConfig 18680 PID:400002 TID:be0002 ActivateChild: Template reg path is Drivers\BuiltIn\Ethman 18681 PID:400002 TID:be0002 ActivateChild: Template reg path is Drivers\BuiltIn\I2C 18683 PID:400002 TID:be0002 ActivateChild: Template reg path is Drivers\BuiltIn\Keypad 18684 PID:400002 TID:be0002 RootBus::ActivateChild load device driver at order 0 18686 PID:400002 TID:be0002 RootBus::ActivateChild load device driver at order 1 18688 PID:400002 TID:be0002 DeviceFolder::LoadDevice!Loading driver from device key Drivers\BuiltIn\SIP 18690 PID:400002 TID:be0002 DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\SIP\BusPrefix) returned 2 18827 PID:400002 TID:c50002 DEVICE!RegReadActivationValues RegQueryValueEx(Notify\BusPrefix) returned 2 18864 PID:19e0002 TID:19f0002 OSAXST1: >>> Loading Module 'coredll.dll' (0x85FFA6CC) at address 0x40010000-0x400F0000 in Process 'udevice.exe' (0x85F05648) 18867 PID:19e0002 TID:19f0002 OSAXST1: >>> Loading Module 'udevice.exe' (0x85F05648) at address 0x00010000-0x00019000 in Process 'udevice.exe' (0x85F05648) 20118 PID:400002 TID:9f0002 FSDMGR!StoreDisk_t::MountStore: Geometry: NumSec=118144 BytesPerSec=2048 FreeSec=0 BiggestCreatable=0 20119 PID:400002 TID:9f0002 Partition PART00 NumSectors=118142 PB Debugger Loaded symbols for 'C:\WINCE600\OSDESIGNS\WIPOQ\WIPOQ \RELDIR\WIPOQ_ARMV4I_DEBUG\UDEVICE.EXE' PB Debugger Unloaded symbols for 'C:\WINCE600\OSDESIGNS\WIPOQ\WIPOQ \RELDIR\WIPOQ_ARMV4I_DEBUG\K.FATUTIL.DLL' 20122 PID:400002 TID:9f0002 MSPART!PD_OpenPartition: dwStoreId=D004E3D0, PartName=PART00 20125 PID:400002 TID:9f0002 FSDMGR!StoreDisk_t::LoadPartition: mounting partition "PART00" on store "DSK1:" 20150 PID:400002 TID:9f0002 FSDMGR!ParitionDisk::LoadPartition: Partition Type 0x06 --> "FATFS" 20155 PID:400002 TID:9f0002 FSDMGR!ParitionDisk::MountPartition: "FATFS" --> exfat.dll 20208 PID:400002 TID:9f0002 OSAXST1: >>> Loading Module 'exfat.dll' (0x85EF6000) at address 0xC04E0000-0xC051B000 in Process 'NK.EXE' (0x84F33AA0) 21764 PID:19e0002 TID:19f0002 Heap Statistics at 0x400DE940 21772 PID:19e0002 TID:19f0002 udevice.exe $udevice_0003 22599 PID:400002 TID:9f0002 OSAXST1: >>> Loading Module 'k.fatutil.dll' (0x85EF6870) at address 0xC0530000-0xC0550000 in Process 'NK.EXE' (0x84F33AA0) 24467 PID:400002 TID:9f0002 FormatDisk!FormatVolume: New extended boot sector successfully written 24514 PID:400002 TID:19f0002 FSDMGR! MountTable_t::RegisterVolumeName: Registered "$udevice_0003" at index 8 24516 PID:400002 TID:19f0002 APISCreateAPIHandle: pvData == NULL 24518 PID:400002 TID:19f0002 FSDMGR!MountTable_t::RegisterVolume: Registered volume at index 8 (Name="$udevice_0003", MountFlags=0x101) 24630 PID:400002 TID:be0002 OSAXST1: >>> Loading Module 'softkb.dll' (0x85EF6D8C) at address 0x402D0000-0x402DC000 in Process 'NK.EXE' (0x84F33AA0) 24636 PID:19e0002 TID:be0002 OSAXST1: >>> Loading Module 'softkb.dll' (0x85EF6D8C) at address 0x402D0000-0x402DC000 in Process 'udevice.exe' (0x85F05648) 24673 PID:400002 TID:be0002 OSAXST1: >>> Loading Module 'ole32.dll' (0x85EF6EC4) at address 0x40470000-0x404CD000 in Process 'NK.EXE' (0x84F33AA0) 24676 PID:19e0002 TID:be0002 OSAXST1: >>> Loading Module 'ole32.dll' (0x85EF6EC4) at address 0x40470000-0x404CD000 in Process 'udevice.exe' (0x85F05648) 24703 PID:400002 TID:be0002 DeviceFolder::LoadDevice(Drivers\BuiltIn \SIP) last 6014 Ticks 24704 PID:400002 TID:be0002 RootBus::ActivateChild load device driver at order 8 24706 PID:400002 TID:be0002 DeviceFolder::LoadDevice!Loading driver from device key Drivers\BuiltIn\credsvc 24709 PID:400002 TID:be0002 DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\credsvc\BusPrefix) returned 2 24827 PID:400002 TID:c50002 OSAXST1: >>> Loading Module 'notify.dll' (0x85026594) at address 0x40120000-0x4013C000 in Process 'NK.EXE' (0x84F33AA0) 24847 PID:19e0002 TID:c50002 OSAXST1: >>> Loading Module 'notify.dll' (0x85026594) at address 0x40120000-0x4013C000 in Process 'udevice.exe' (0x85F05648) 25210 PID:1c50002 TID:1c60002 OSAXST1: >>> Loading Module 'coredll.dll' (0x85FFA6CC) at address 0x40010000-0x400F0000 in Process 'udevice.exe' (0x8502690C) 25214 PID:1c50002 TID:1c60002 OSAXST1: >>> Loading Module 'udevice.exe' (0x8502690C) at address 0x00010000-0x00019000 in Process 'udevice.exe' (0x8502690C) 25517 PID:400002 TID:9f0002 FormatDisk!FormatVolume: New FAT #0 successfully written 25524 PID:400002 TID:9f0002 FormatDisk!FormatVolume: New root directory successfully written 25530 PID:400002 TID:9f0002 FormatDisk!FormatVolume: New BPB successfully written 25532 PID:400002 TID:9f0002 FormatDisk!FormatVolume complete. 25536 PID:400002 TID:9f0002 OSAXST1: <<< Unloading Module 'k.fatutil.dll' (0x85EF6870) at address 0xC0530000-0xC0550000 in Process 'NK.EXE' (0x84F33AA0) 25542 PID:400002 TID:9f0002 FSDMGR!MountFileSystemDriver: failed formatting disk before mounting! 25543 PID:400002 TID:9f0002 FSD_MountDisk: Mounting volume for hDsk=D0101810 25568 PID:400002 TID:9f0002 FATFS!ReadRegistryValues: Registry flags = 0x20 25569 PID:400002 TID:9f0002 FATFS!ReadRegistryValues: Force write through enabled 25571 PID:400002 TID:9f0002 FATFS!ReadRegistryValues: Automatic formatting enabled 25572 PID:400002 TID:9f0002 FATFS!ReadRegistryValues: Transact data disabled 25575 PID:400002 TID:9f0002 FATFS!ReadRegistryValues: Security Support disabled 25578 PID:400002 TID:9f0002 FATFS!ScanVolume: Beginning Scan 25585 PID:400002 TID:9f0002 OSAXST1: >>> Loading Module 'k.fatutil.dll' (0x85EF690C) at address 0xC0530000-0xC0550000 in Process 'NK.EXE' (0x84F33AA0) PB Debugger Loaded symbols for 'C:\WINCE600\OSDESIGNS\WIPOQ\WIPOQ \RELDIR\WIPOQ_ARMV4I_DEBUG\K.FATUTIL.DLL' 29798 PID:19e0002 TID:c50002 [NOTIFY] Module loaded 29834 PID:19e0002 TID:1db0002 [NOTIFY] Initializing. 29872 PID:400002 TID:1db0002 DB:OpenDB fail: DB DB_notify_queue not found 29898 PID:19e0002 TID:1db0002 [NOTIFY] Initialization completed successfully 29913 PID:1c50002 TID:1c60002 Heap Statistics at 0x400DE940 29922 PID:1c50002 TID:1c60002 udevice.exe $udevice_1001 29974 PID:19e0002 TID:1df0002 [NOTIFY] ProcessDatabase::started at local time 05/09/2005 12:01:37 32439 PID:400002 TID:1c60002 FSDMGR! MountTable_t::RegisterVolumeName: Registered "$udevice_1001" at index 9 32440 PID:400002 TID:1c60002 APISCreateAPIHandle: pvData == NULL 32441 PID:400002 TID:1c60002 FSDMGR!MountTable_t::RegisterVolume: Registered volume at index 9 (Name="$udevice_1001", MountFlags=0x101) PB Debugger Loaded symbols for 'C:\WINCE600\OSDESIGNS\WIPOQ\WIPOQ \RELDIR\WIPOQ_ARMV4I_DEBUG\CREDSVC.DLL' 32554 PID:400002 TID:be0002 OSAXST1: >>> Loading Module 'credsvc.dll' (0x850046C0) at address 0x40390000-0x403BA000 in Process 'NK.EXE' (0x84F33AA0) 32557 PID:1c50002 TID:be0002 OSAXST1: >>> Loading Module 'credsvc.dll' (0x850046C0) at address 0x40390000-0x403BA000 in Process 'udevice.exe' (0x8502690C) 32793 PID:19e0002 TID:c50002 [NOTIFY] HandleSystemEvent 7 /ADD BUS2: PB Debugger Loaded symbols for 'C:\WINCE600\OSDESIGNS\WIPOQ\WIPOQ \RELDIR\WIPOQ_ARMV4I_DEBUG\CREDPROV.DLL' 32839 PID:19e0002 TID:c50002 [NOTIFY] HandleSystemEvent 7 /ADD SIP0: 32885 PID:19e0002 TID:c50002 [NOTIFY] HandleSystemEvent 7 /ADD NFY0: 35724 PID:400002 TID:1f30002 OSAXST1: >>> Loading Module 'credprov.dll' (0x85004B88) at address 0x40460000-0x40466000 in Process 'NK.EXE' (0x84F33AA0) 35729 PID:1c50002 TID:1f30002 OSAXST1: >>> Loading Module 'credprov.dll' (0x85004B88) at address 0x40460000-0x40466000 in Process 'udevice.exe' (0x8502690C) 38186 PID:1c50002 TID:1f30002 CREDSVC: LoadVProviders: There are no virtual type providers present 38341 PID:400002 TID:be0002 DeviceFolder::LoadDevice(Drivers\BuiltIn \credsvc) last 13634 Ticks 38342 PID:400002 TID:be0002 DeviceFolder::LoadDevice!Loading driver from device key Drivers\BuiltIn\GPIO 38346 PID:400002 TID:be0002 DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\GPIO\BusPrefix) returned 2 38373 PID:400002 TID:be0002 DEVICE!I_ActivateDeviceEx: couldn't activate: prefix GIO, index 1, dll buses.dll, context 0xd026e644 38380 PID:400002 TID:be0002 DeviceFolder::LoadDevice(Drivers\BuiltIn \GPIO) last 35 Ticks PB Debugger Loaded symbols for 'C:\WINCE600\OSDESIGNS\WIPOQ\WIPOQ \RELDIR\WIPOQ_ARMV4I_DEBUG\KEYPAD.DLL' 38381 PID:400002 TID:be0002 DeviceFolder::LoadDevice!Loading driver from device key Drivers\BuiltIn\I2C 38385 PID:400002 TID:be0002 DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\I2C\BusPrefix) returned 2 38472 PID:19e0002 TID:c50002 [NOTIFY] HandleSystemEvent 7 /ADD CRD0: 38490 PID:400002 TID:be0002 +OEMIoControl(0x1010098, 0xd0102bdc, 4, 0xd0102c00, 4, 0x0) 38491 PID:400002 TID:be0002 -OEMIoControl(rc = 1) 38597 PID:400002 TID:be0002 DeviceFolder::LoadDevice(Drivers\BuiltIn \I2C) last 213 Ticks 38599 PID:400002 TID:be0002 RootBus::ActivateChild load device driver at order 16 PB Debugger Loaded symbols for 'C:\WINCE600\OSDESIGNS\WIPOQ\WIPOQ \RELDIR\WIPOQ_ARMV4I_DEBUG\NDIS.DLL' 38601 PID:400002 TID:be0002 DeviceFolder::LoadDevice!Loading driver from device key Drivers\BuiltIn\MSFlash PB Debugger Loaded symbols for 'C:\WINCE600\OSDESIGNS\WIPOQ\WIPOQ \RELDIR\WIPOQ_ARMV4I_DEBUG\CXPORT.DLL' 38604 PID:400002 TID:be0002 DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\MSFlash\BusPrefix) returned 2 38606 PID:400002 TID:be0002 DeviceFolder::LoadDevice(Drivers\BuiltIn \MSFlash) last 4 Ticks 38607 PID:400002 TID:be0002 DeviceFolder::LoadDevice!Loading driver from device key Drivers\BuiltIn\Keypad 38611 PID:400002 TID:be0002 DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\Keypad\BusPrefix) returned 2 38641 PID:400002 TID:be0002 OSAXST1: >>> Loading Module 'keypad.dll' (0x85004E64) at address 0xC0A10000-0xC0A18000 in Process 'NK.EXE' (0x84F33AA0) PB Debugger Loaded 'C:\WINCE600\OSDESIGNS\WIPOQ\WIPOQ\RELDIR \WIPOQ_ARMV4I_DEBUG\RSAENH.DLL', no matching symbolic information found. 38822 PID:19e0002 TID:c50002 [NOTIFY] HandleSystemEvent 7 /ADD I2C1: 41028 PID:400002 TID:be0002 +OEMIoControl(0x1010098, 0xd010793c, 4, 0xd0107970, 4, 0x0) 41031 PID:400002 TID:be0002 -OEMIoControl(rc = 1) 41038 PID:400002 TID:be0002 DeviceFolder::LoadDevice(Drivers\BuiltIn \Keypad) last 2429 Ticks 41039 PID:400002 TID:be0002 RootBus::ActivateChild load device driver at order 33 41041 PID:400002 TID:be0002 DeviceFolder::LoadDevice!Loading driver from device key Drivers\BuiltIn\NDIS 41045 PID:400002 TID:be0002 DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\NDIS\BusPrefix) returned 2 41064 PID:400002 TID:be0002 OSAXST1: >>> Loading Module 'ndis.dll' (0x850593C0) at address 0xC0720000-0xC0784000 in Process 'NK.EXE' (0x84F33AA0) 41105 PID:400002 TID:be0002 OSAXST1: >>> Loading Module 'cxport.dll' (0x850594F8) at address 0xC0610000-0xC0620000 in Process 'NK.EXE' (0x84F33AA0) 41262 PID:19e0002 TID:c50002 [NOTIFY] HandleSystemEvent 7 /ADD KPD1: 44209 PID:400002 TID:be0002 OSAXST1: >>> Loading Module 'rsaenh.dll' (0x8505769C) at address 0xD0610000-0xD063B000 in Process 'NK.EXE' (0x84F33AA0) 50981 PID:400002 TID:be0002 NDIS: RebindAdaptersOnResume = 0 PB Debugger Loaded symbols for 'C:\WINCE600\OSDESIGNS\WIPOQ\WIPOQ \RELDIR\WIPOQ_ARMV4I_DEBUG\AFD.DLL' 50982 PID:400002 TID:be0002 NDIS: PcmciaNeedsMapToScrap = 0 51510 PID:400002 TID:be0002 NDIS:: CE_DeleteBusFriendlyNames() failed deleting [HKLM\Comm\BusFriendlyNames] 51527 PID:400002 TID:be0002 DeviceFolder::LoadDevice(Drivers\BuiltIn \NDIS) last 10485 Ticks 51528 PID:400002 TID:be0002 RootBus::ActivateChild load device driver at order 34 51530 PID:400002 TID:be0002 DeviceFolder::LoadDevice!Loading driver from device key Drivers\BuiltIn\AFD 51533 PID:400002 TID:be0002 DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\AFD\Prefix) returned 2 51534 PID:400002 TID:be0002 DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\AFD\BusPrefix) returned 2 51552 PID:400002 TID:be0002 OSAXST1: >>> Loading Module 'afd.dll' (0x85074708) at address 0xC06D0000-0xC071A000 in Process 'NK.EXE' (0x84F33AA0) 51739 PID:19e0002 TID:c50002 [NOTIFY] HandleSystemEvent 7 /ADD NDS0: 55081 PID:400002 TID:be0002 AFD:Init Can't load library ppp.dll 55714 PID:400002 TID:be0002 OSAXST1: >>> Loading Module 'tcpstk.dll' (0x8509E45C) at address 0xC07E0000-0xC08B6000 in Process 'NK.EXE' (0x84F33AA0) PB Debugger Loaded symbols for 'C:\WINCE600\OSDESIGNS\WIPOQ\WIPOQ \RELDIR\WIPOQ_ARMV4I_DEBUG\TCPSTK.DLL' 58336 PID:400002 TID:be0002 *** New TcpStack *** PB Debugger Loaded symbols for 'C:\WINCE600\OSDESIGNS\WIPOQ\WIPOQ \RELDIR\WIPOQ_ARMV4I_DEBUG\DHCP.DLL' 58459 PID:400002 TID:be0002 OSAXST1: >>> Loading Module 'dhcp.dll' (0x8509EE70) at address 0xC07C0000-0xC07D6000 in Process 'NK.EXE' (0x84F33AA0) 59652 PID:400002 TID:be0002 OSAXST1: >>> Loading Module 'netbios.dll' (0x8509D2DC) at address 0xC0940000-0xC095B000 in Process 'NK.EXE' (0x84F33AA0) PB Debugger Loaded symbols for 'C:\WINCE600\OSDESIGNS\WIPOQ\WIPOQ \RELDIR\WIPOQ_ARMV4I_DEBUG\NETBIOS.DLL' 63994 PID:400002 TID:be0002 DEVICE!RegReadActivationValues RegQueryValueEx(Comm\Devices\TCPIP\IPDevice\BusPrefix) returned 2 64132 PID:400002 TID:be0002 DEVICE!RegReadActivationValues RegQueryValueEx(Comm\Devices\TCPIP\TCPDevice\BusPrefix) returned 2 64162 PID:400002 TID:be0002 +TCP_Init(d026d57c) 64328 PID:19e0002 TID:c50002 [NOTIFY] HandleSystemEvent 7 /ADD IPD0: 64372 PID:19e0002 TID:c50002 [NOTIFY] HandleSystemEvent 7 /ADD TCP0: 65529 PID:400002 TID:be0002 !AFD: Unable to load library 'tcpip6.dll' 66665 PID:400002 TID:be0002 !AFD: Unable to load library 'irdastk.dll' 67666 PID:400002 TID:be0002 !AFD: Unable to load library 'btd.dll' 68218 PID:400002 TID:9f0002 OSAXST1: <<< Unloading Module 'k.fatutil.dll' (0x85EF690C) at address 0xC0530000-0xC0550000 in Process 'NK.EXE' (0x84F33AA0) PB Debugger Unloaded symbols for 'C:\WINCE600\OSDESIGNS\WIPOQ\WIPOQ \RELDIR\WIPOQ_ARMV4I_DEBUG\K.FATUTIL.DLL' 69066 PID:400002 TID:be0002 OSAXST1: >>> Loading Module 'redir.dll' (0x850997A4) at address 0xC08C0000-0xC0934000 in Process 'NK.EXE' (0x84F33AA0) PB Debugger Loaded symbols for 'C:\WINCE600\OSDESIGNS\WIPOQ\WIPOQ \RELDIR\WIPOQ_ARMV4I_DEBUG\REDIR.DLL' 69370 PID:400002 TID:9f0002 FSDMGR!MountTable_t::RegisterVolumeName: Registered "john" at index 10 69371 PID:400002 TID:9f0002 FSDMGR!MountTable_t::RegisterVolume: Registered volume at index 10 (Name="john", MountFlags=0x50) 69379 PID:400002 TID:9f0002 FSDMGR!MountedVolume_t::InstallFilter: Loading filter "" from key "System\StorageManager\Profiles\MSFlash \FATFS\Filters\CacheFilt" 70499 PID:400002 TID:be0002 RdrMain: DLL_PROCESS_ATTACH, hInst: 0x850997A4 70502 PID:400002 TID:be0002 +RDR:Redir helper func: Ctxt:0x0, OpCode:1 70502 PID:400002 TID:be0002 +RDR:InitRedir 70508 PID:400002 TID:9f0002 FSDMGR!MountedVolume_t::InstallFilter: failed loading filter "" PB Debugger Loaded symbols for 'C:\WINCE600\OSDESIGNS\WIPOQ\WIPOQ \RELDIR\WIPOQ_ARMV4I_DEBUG\WS2INSTL.DLL' 70510 PID:400002 TID:9f0002 FSDMGR! FileSystemFilterDriver_t::~FileSystemFilterDriver_t: deleting filter (D0103C50) 70511 PID:400002 TID:9f0002 FSDMGR!NullDisk_t::~NullDisk_t: deleting disk (D0103AF0) 70514 PID:400002 TID:9f0002 FATFS!RegisterVolume: Mounted volume HVOL=0x02230003 at "john" 70518 PID:400002 TID:9f0002 FATFS!MountVolume: Successfully mounted regular FAT32 volume. Input on why the partition doesn't mount would be greatly appreciated! /John Tag: OsAxsHwTrap problem Tag: 106523
  - 4
    - Adding a Certificate to NK.bin? We have a device that will be deployed on shop floor networks. It is essentially guaranteed that the device will not have access to the Internet. I have a requirement that I verify executables on a thumb drive originated with our company prior to running them (for maintenance and/or upgrades). I thought I would sign the executables (we do that already) and verify the signature. Since the device cannot go the the certificate authority (Verisign in our case) and get our certificate, the certificate needs to be installed. In know this has been asked before: <http://groups.google.com/group/ microsoft.public.windowsce.platbuilder/browse_thread/thread/ 26b7f63130736909/1393eb2f43b6101b?hl=en&lnk=gst&q=Add +Certificate#1393eb2f43b6101b>, but is there a way to add a certificate to the image (i.e. the NK.bin file)? Pat O Cognex, Corp. Tag: OsAxsHwTrap problem Tag: 106521
  - 5
    - Problem to load Stream Drivers in release configuration I've developped a Stream Driver. Everything looks fine in Debug Configuration and works pretty well on my Device. Then I sysgen My OS + My Driver in RELEASE Configuration. I run it on my Device,.In this case My driver is not loaded by The Device Manager. I cannot figure out why, I checked registry key, exported functions...I cannot figure out why it works in debug and not in release. Any clues. Nat Tag: OsAxsHwTrap problem Tag: 106514
  - 6
    - DEBUGCHK failed in file problem Hi All, I am working on WINCE 6.0 BSP development. I have developed BSP for MC9328MXL I have built DEBUG version with KITL and Kernel Debugger enabled while building. while booting I am facing problem. Can anyone please help me regarding DEBUGCHK failed in file problem that I get while debugging Below is the debug information I get on my platform builder 4294767296 PID:400002 TID:b60002 Ceddk!CalibrateStallCounter: Could not find stall counter 4294767296 PID:400002 TID:b60002 Ceddk!BeginCalibration: min(96001) max(106667) 4294767296 PID:400002 TID:b60002 Ceddk!BeginCalibration: Elapsed is 101121 4294767296 PID:400002 TID:b60002 Ceddk!BeginCalibration: Delay is 14 4294767296 PID:400002 TID:b60002 +PmInit 4294767296 PID:400002 TID:b60002 -PmInit: returning 1 4294767296 PID:400002 TID:b60002 DEVICE!DevloadInit 4294767296 PID:400002 TID:b60002 DEVICE!InitDevices: Root Key is Drivers\BuiltIn. 4294767296 PID:400002 TID:b60002 DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\Prefix) returned 2 4294767296 PID:400002 TID:b60002 DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\BusPrefix) returned 2 4294767296 PID:400002 TID:b60002 OSAXST1: >>> Loading Module 'busenum.dll' (0x83F676B4) at address 0xC0470000-0xC047B000 in Process 'NK.EXE' (0x809B1AA0) PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS \TINY_KITL_WORKNG_DBG\TINY_KITL_WORKNG_DBG\RELDIR\MC9328_ARMV4I_DEBUG \BUSENUM.DLL' 4294767296 PID:400002 TID:650002 FILESYS: SignalStarted loop = 1 4294767296 PID:400002 TID:650002 FILESYS: Launching gwes.dll 4294767296 PID:400002 TID:650002 OSAXST1: >>> Loading Module 'gwes.dll' (0x83F678D0) at address 0xC0250000-0xC0416000 in Process 'NK.EXE' (0x809B1AA0) PB Debugger Loaded symbols for 'E:\WINCE600\OSDESIGNS \TINY_KITL_WORKNG_DBG\TINY_KITL_WORKNG_DBG\RELDIR\MC9328_ARMV4I_DEBUG \GWES.DLL' 4294767296 PID:400002 TID:650002 Filesys: Loaded gwes.dll 4294767296 PID:400002 TID:650002 FILESYS: Done launching apps 4294767296 PID:400002 TID:650002 -DEVICE!DevloadPostInit 4294767296 PID:400002 TID:650002 This device has booted 1 times !!! 4294767296 PID:400002 TID:d40002 Ceddk!CalibrateStallCounter: Enter 4294767296 PID:400002 TID:d40002 Ceddk!CalibrateStallCounter: Stall counter loaded from registry(14) 4294767296 PID:400002 TID:d40002 System Default HKL value set to 00000409 4294767296 PID:400002 TID:d40002 Grow Gdi handle table from 0 to 64 4294767296 PID:400002 TID:d40002 LogFontFromRegistry(SYSTEM\GDI \SysFnt), lfHeight = -12 4294767296 PID:400002 TID:d40002 *** FAILED TO FIND SPECIFIED DISPLAY DRIVER! *** 4294767296 PID:400002 TID:d40002 *** ATTEMPTING TO LOAD DISPLAY DRIVER DDI.DLL! *** 4294767296 PID:400002 TID:d40002 *** COULD NOT LOAD DISPLAY DRIVER (DDI.DLL)! *** 4294767296 PID:400002 TID:d40002 *** ATTEMPTING TO LOAD DISPLAY DRIVER DDI_NOP.DLL! *** 4294767296 PID:400002 TID:d40002 *** COULD NOT LOAD DISPLAY DRIVER (DDI_NOP.DLL)! *** 4294767296 PID:400002 TID:d40002 *** GWES FAILED TO LOAD A DISPLAY DRIVER!!! PREPARE FOR MAYHEM!!! *** 4294767296 PID:400002 TID:d40002 Unknown: DEBUGCHK failed in file C: \ymzki\private\winceos\COREOS\gwe\mgdi\base\.\gdi.cpp at line 2635 I have not developed LCD driver for the board yet. Is this anything related to LCD driver? Please anyone know about this help me. Thanks, Chitra Tag: OsAxsHwTrap problem Tag: 106507
  - 7
    - NAND Flash In NAND flash document I could not find any terms referring to Sector. I found blocks and pages in NAND flash. But In WindowCE FMD always reference to sector address. 1. For example Sector Address =0x00000140 means which block and which page in the block it is refering to. My nand flash is only 64MB of 512Mbits x8 device. window CE NBoot debug message shows total sector 56916. But the nand flash documentation tells total 4096 blocks ,each blocks 32 page, each page is 512 bytes. I could not corelate the sector with nand flash block and pages size. Can anyone explain me what do you mean by sector address in FMD for windowCE. Prosanta Tag: OsAxsHwTrap problem Tag: 106504
  - 8
    - Power Manager Hello all, We have registry entry for informing the Power Manager when there is any user input may be keyboard, mouse etc. Similar to that, is there any registry info which informs power manager that, the system is active but the user is idle? I am trying to implement the feature user idle, system active. I implemented the system activity timer. but, still its not working. for example, if the system plays media player, the system should reset the timer before it expires. In useractivity case, it is working. but, not working for user idle, system active. Does anyone faced this similar issue? thanks in advance. Tag: OsAxsHwTrap problem Tag: 106499
  - 9
    - .NET 2.0 not selectable in catalog Hello again, The story starts like this. We need to integrate a product that uses the .NET CF (compact framework) 2.0 SP1 into our CE 5.0 image. So, I installed the 20061231 QFE rollup from Microsoft. The install seemed to complete just fine. Then I re-opened platform builder 5, removed .NET version 1 from my workspace, and went to select .NET version 2. I then discovered that I could not select either "Add to OS design" or "View Dependencies," the options were greyed out. I was able to add .NET version 2 via manually selecting the environment variable, then building. My questions are: why is GUI option still greyed out, and how do I correct that? Thank you, Roger (I included all that detail to help make this thread more searchable, aren't I socially minded) Tag: OsAxsHwTrap problem Tag: 106492
  - 10
    - intercept SIM API call all, I want to intercept the SIM API call for WM 5.0 platform. After intercepting the API, we would like to call the original API entry and do some data processing inside the API hook. Can anyone tell me what is the best way to intercpet the SIM API call? Can I intercpet the RIL API call in this case? Thx. Tag: OsAxsHwTrap problem Tag: 106489
  - 11
    - ANN: October Windows CE Live Chat Tomorrow! Just a note that we'll be hosting an online chat tomorrow concerning Windows Embedded CE 6.0! Members of the development team will be on hand ready to answer your questions, so bring 'em on! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Title: Windows CE Live Chat! October 31, 2007 9:00 - 10:00 A.M. Pacific time Additional Time Zones: http://www.timeanddate.com/worldclock/fixedtime.html?month=10&day=31&year=2007&hour=9&min=0&sec=0&p1=234 Description: Do you have tough technical questions regarding Windows CE or Windows Mobile for which you're seeking answers? Do you want to tap into the deep knowledge of the talented Microsoft Embedded Devices Group members? If so, please join us for a live Windows CE chat and bring on the questions! Windows CE is the operating system that is powering the next generation of 32-bit, small-footprint and mobile devices. This chat will cover the tools and technologies used to develop devices using the Windows CE operating system. To join this chat, please log on via the main MSDN chat page at: http://msdn.microsoft.com/chats/ Chat Transcripts: Missed a recent chat? We welcome you to visit the Transcript Archive. Transcripts are usually posted within two weeks of the live event. http://msdn.microsoft.com/chats/transcripts/mobileembedded/default.aspx ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Sue sloh@microsoft.com (remove "online" from reply-to address) http://blogs.msdn.com/ce_base/ _____________________________________________________________ This posting is provided "AS IS" with no warranties, and confers no rights. _____________________________________________________________ Tag: OsAxsHwTrap problem Tag: 106485
  - 12
    - Missing source browse information files in CE5.0 > Does anyone know how to get PB to recognize its own browse information? When a project is compiled with Settings > C++ > Generate Browse Information = Yes, the compiler produces sbr files in a bizarre location under Documents and Settings. The debugger says there is no browse information. I have tried copying the sbr files to nearly every directory under pbworkspaces. I have converted them to bsc files and copied these to the same directories. All to no avail. Tag: OsAxsHwTrap problem Tag: 106481
  - 13
    - Kernel hangs in lmemdebug loading Hi, I have been posting several queries for the past few days.I want to say proudly that scheduling is happening in my ARM926EJS board without any change in MS code. I havent enabled KITL and kernel debugger.No peripherals other than timer,vic and Uart are enabled.My personal debug messages are also present. No i have enabled all debugzones in the starting.I am getting exception while loading lmemdebug.dll. Pls clarify.My oemaddress table is as follows DCD 0x80000000, 0x20000000, 16 ; SDRAM (16MB). DCD 0x81000000, 0x30000000, 1 ; Memory controller. DCD 0x81100000, 0x40000000, 1 ; DMA controller. DCD 0x81200000, 0x60000000, 1 ; DISPLAY DCD 0x81300000, 0xC0000000, 1 ; TIMER0 DCD 0x81400000, 0xC2000000, 1 ;: UART controller. DCD 0x81500000, 0xC6000000, 1 ; : GPIO DCD 0x81600000, 0xCA000000, 1 ; CLOCK DCD 0x81700000, 0xF0000000, 1 ; VIC DCD 0x00000000, 0x00000000, 0 ; end of table My config.bib is as follows MEMORY ; Name Start Size Type ; ------- -------- -------- ---- RSVD 80000000 000FF000 RESERVED ARGS 800FF000 00001000 RESERVED NK 80100000 00400000 RAMIMAGE ;001E8480 RAM 80500000 00B00000 RAM ;802E8480 ; Reserve ZBANK virtual block (No physical memory ; is required to back this virtual range). ; ZBANK 96500000 00100000 RESERVED CONFIG AUTOSIZE=ON KERNELFIXUPS=ON ROMSTART=80100000 ROMWIDTH=32 ROMSIZE=400000 My serial debug messages around the exception is given as follows. Timer Interrupt : OALTimerIntrHandler :-> rn psrs->mode = 10, psrs->prevSP = 00000000 Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> 0x80fe9000: ObjectCall: obs = 0408fdd4, ra=03f901d0 h=80fff2cc iMethod=ffffffea mode=10 extra=ffffc800, prevSP = 00000000 0x80fe9000: ObjectCall: 80103048 'Wn32' API call #22. disp=3. 0x80fe9000: KPSLDispat Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> ch: pci 80103048, fnptr 80147e0c 0x80fe9000: SC_OpenEvent entry: 001f0003 00000000 801116c4 00000000 0x80fe9000: SC_OpenEvent exit: 00000000 0x80fe9000: SCR: psrs = 0408fde8 0x80fe9000: SCRet: return to 03f901d0 Proc=80299 630 aky=3, mode = 00000010 0x80fe9000: SCRet: Before return psrs->mode = Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> 10, psrs->prevSP = 00000000 Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> 0x80fe9000: ObjectCall: obs = 0408fd7c, ra=03f92798 h=01fffeb4 iMethod=ffffffc4 mode=10 extra=ffffc800, prevSP = 0000000 Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> 0 0x80fe9000: ObjectCall: 80103048 'Wn32' API call #60. disp=3. 0x80fe9000: KPSLDispatch: pci 80103048, fnptr 80146040 0x80fe9000: SC_MapPtrUnsecure entry: 01fffeb4 00000042 0x80fe9000: SC_MapPtrUnsecure exit: 05fffeb4 0x80fe9000: SCR: psrs = 0408fd90 0x80fe9000: SCRet: return to 03f92798 Proc Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> =80299630 aky=3, mode = 00000010 0x80fe9000: SCRet: Before return psrs->mode = 10, psrs->prevSP = 00000000 Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> 0x80fe9000: ObjectCall: obs = 0408fd10, ra=03f8edf0 h=03f82610 iMethod=ffffff6c mode= Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> 10 extra=ffffc800, prevSP = 00000000 0x80fe9000: ObjectCall: 80103048 'Wn32' API call #148. disp=3. 0x80fe9000: KPSLDispatch: pci 80103048, fnptr 8016ba60 0x80fe9000: SC_LoadLibraryExW entry: 03f82610 00000000 0408fd38 0x80fe9000: LoadOneLibraryPart2: LMemDebug.DLL, 1, 0x0 0x80fe9000: LoadOneLib Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> rary LMemDebug.DLL (LMemDebug.DLL), LoadHigh = 0 0x80fe9000: OpenExecutable: LMemDebug.DLL 0x80fe9000: OpenExecutable: plain name = LMemDebug.DLL 0x80fe9000: OpenExecutable: Filesys not loaded, Opening from ROM 0x80fe9000: OpenExecutable: LMemDebug.DLL.dll 0x80fe9000: OpenExecutable: plain nam Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> e = LMemDebug.DLL.dll 0x80fe9000: OpenExecutable: Filesys not loaded, Opening from ROM 0x80fe9000: SC_LoadLibraryExW exit: 00000000 0x80fe9000: SCR: psrs = 0408fd24 0x80fe9000: SCRet: return to 03f8edf0 Proc=80299 630 aky=3, mode = 00000010 0x80fe9000: SCRet: Before return psrs->mode = 10, psrs-> Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> prevSP = 00000000 Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> 0x80fe9000: ObjectCall: obs = 0408fd64, ra=03f93364 h=01fffea0 iMethod=fff Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> fffb2 mode=10 extra=ffffc800, prevSP = 00000000 0x80fe9000: ObjectCall: 80103048 'Wn32' API call #78. disp=3. 0x80fe9000: KPSLDispatch: pci 80103048, fnptr 80134a90 0x80fe9000: SC_CreateCrit entry: 01fffea0 0x80fe9000: SC_CreateCrit exit: 80fe980c 0x80fe9000: SCR: psrs = 0408fd78 0x80fe9000: S Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> CRet: return to 03f93364 Proc=80299630 aky=3, mode = 00000010 0x80fe9000: SCRet: Before return psrs->mode = 10, psrs->prevSP = 00000000 Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> 0x80fe9000: ExceptionDis Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> patch: pexi=0408fd64 Pc=00000000 0x80fe9000: addr 5fffef4, id 3, sp 0408fda8, fsr=00000005, BVA = 00000000 0x80fe9000: ExD: ID_PREFETCH_ABORT 0x80fe9000: ExD: addr = 00000000 0x80fe9000: ProcessPageFault: Read @00000000, InSysCall() = 0 0x80fe9000: ProcessPageFault returning: FALSE 0x80fe9000: Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> Prefetch Abort: Thread=80fe9000 Proc=80299630 'filesys.exe' 0x80fe9000: AKY=00000003 PC=00000000(???+0x00000000) RA=03fa074c(coredll.dll+0x0 002074c) BVA=00000000 FSR=00000005 0x80fe9000: NKDispatchException(0408f8a4): Proc=80299630 ControlPc=00000000 SP=0 408fda8, PSR = 60000010 0x80fe9000: NKDi Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> spatchException(0408f8a4): Proc=80299630 ControlPc=03fa0748 SP=0408fda8, PSR = 60000010 0x80fe9000: PDataFromPC: Returning 03ff7000 0x80fe9000: NKDispatchException: retu rning failure. Flags=0 0x80fe9000: PDataFromPC: Returning 03ff7000 0x80fe9000: Unhandled exception c0000005: 0x80fe9000: Termi Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> nating thread 80fe9000 0x80fe9000: GuardCommit 00000000 i searched across newsgroups and found Susan Loh [MS] told like if it is included in the Module section it may give exception, "Since coredll.dll, which exports most of the system APIs, isn't loaded until partway through initialization of filesys.exe, it is quite likely that lmemdebug.dll would have problems when loaded that early" Mine is tiny-kernel and added support for ROM/RAM filesystem and command shell also. Eventhough lmemdebug.dll was not present in my release directory,i was getting the same debug output. Then i added support for lmemdebug and added it in common.bib. Still i am getting the same error. FILES ceconfig.h $(_FLATRELEASEDIR)\ceconfig.h NK lmemdebug.dll $(_FLATRELEASEDIR)\lmemdebug.dll NK I know at this point only experienced persons know where the problem is. Looking for your fast response.. Thanking you Tag: OsAxsHwTrap problem Tag: 106480
  - 14
    - trouble with deploying at C# hi? My environment is PB5.0 for os building and visual studio 2005 team edition for c# app developing. Of course, I added dotnet cf catalog to the os design. The problem is all files in C:\\Program Files\\Microsoft Visual Studio 8\\SmartDevices\\SDK\\CompactFramework\\2.0\\v2.0\\WindowsCE\\wce500\\x86 are deployed at every time when the app is run. So the total consumed time for executing the app is so much, over 3 minutes. This phenomenon isn't happened from the first os. On updating my os design, this problem is happened. Is there any body who tell me the solution? Tag: OsAxsHwTrap problem Tag: 106478
  - 15
    - Power Manager - SystemIdle Hello all, I have reused the Power Manager PDD of PDA. In that the systemidle option is not there. I implemented that similar to user idle. But, it is not working. Is there any way, to reset the timer that, the system is not idle but the user is idle. So, that the system should not go to sleep mode/suspend mode. it should be in user idle mode. thanks in advance.... Tag: OsAxsHwTrap problem Tag: 106471
  - 16
    - Printer driver Lost of printer is not supported by WindowCE. does the Microsoft provide any driver for printer, how to get it ? Tag: OsAxsHwTrap problem Tag: 106468
  - 17
    - [possible ?? ] Linux/Win CE 5.0 bootloader on NAND flash Guys, We build and sell BSP for our MIPS II based CPU. We use only NAND flash (no other flash onboard) based bootloader for Windows CE 5.0. We have a Linux 2.6 BSP too. When we ship the board to customer, we must burn Linux/WinCE bootloaders on board so that the customer can see the demo. Any ideas how to put Linux/WinCE bootloaders on NAND flash simultaneously ?. Has anyone attempted such things like a boot-choice - NAND resident program that jumps to a user selected OS ?.. Any references ?? regards, GS 10/30/2007 Taipei ============================================================================== Tag: OsAxsHwTrap problem Tag: 106466
  - 18
    - ANN: OpenNETCF introduces ASP.NET Web Server for Windows CE We're at it again! OpenNETCF Consulting is pleased to announce the release of a new product named "Padarn". Padarn is a very small footprint (less than 300k for all files) ASP.NET web server designed to run under the limited resource environments of Windows CE 5.0 and 6.0. Padarn lets you leverage both existing codebases and the rapid development enabled by managed code plus, unlike the out-of-box web "solutions" for Windows CE, you can actually use a debugger to step through your code with Padarn. To see Padarn in action or to just get more information visit us on the web at http://www.opennetcf.com/padarn.ocf -- Chris Tacke, eMVP Join the Embedded Developer Community http://community.opennetcf.com Tag: OsAxsHwTrap problem Tag: 106457
  - 19
    - Converting PCM Wav files to GSM6.1 format I am writing a program to convert PCM Wav files to other formats like mula, GSM6.1, ADPCM etc. When I call acmFormatSuggest for the format tag WAVE_FORMAT_GSM610 I get an Not Possible error(512). This codec is installed on my system and I am able to use another program to convert my WAV file to GSM6.10 format. I call the function as follows: GSM610WAVEFORMAT *destWavFmt; destWavFmt = (LPGSM610WAVEFORMAT)((char*)srcWavFmt+max_format_size); destWavFmt->wfx.wFormatTag = WAVE_FORMAT_GSM610; result = acmFormatSuggest(NULL, srcWavFmt, (LPWAVEFORMATEX) destWavFmt, max_format_size, ACM_FORMATSUGGESTF_WFORMATTAG); I get result = 512. Any suggestions please!!! Thanks Tag: OsAxsHwTrap problem Tag: 106452
  - 20
    - Removing .db file entry for PUBLIC item Hi, I'm looking for any creative solutions that you might have found to the following problem: I have ActiveSync in my build, but do not want it to start automatically every time there is an RS232 connect event (this is annoying and does not fit the usage model of our device; manual start is fine, when ActiveSync is to be used). This is all well and good, but when you include ActiveSync in the configuration, you *always* get datasync.db included in your image and that *always* puts the database entries to start ActiveSync in the notification database. The help page for ActiveSync says, "If you do not need AutoNotify, remove this entry.", but that was obviously written by someone who has never used PB in the real world. I shouldn't modify PUBLIC, as I don't want to prevent *every* device that I might build from having this feature, just the ones that I choose. Unlike registry files, there does not appear to be a way to indicate that a given entry should be removed from the database via some .db file that I create (or via entries added to project.db or something easy and sensible). So, I could somehow forcably copy my own datasync.db over the top of the one from ActiveSync found in the flat release directory, or I could edit the PUBLIC code to remove the AutoNotify entry and assume that I'll remember to put it in my own .db file on any device that *should* have it. Other solutions? Paul T. Tag: OsAxsHwTrap problem Tag: 106444
  - 21
    - Kernel hangs in primary thread Hi, I am working on ARM926EJS SOC.I am building an image with a tiny kernel configuration and i havent enabled any other peripherals other than uart,vic and timer1.I haven't enabled KITL and kernel debugger. I am building NK.nb0 and downloading directly using Lauterbaugh. I have 16 MB of SDRAM starts with 0x20000000 and i am downloading my image to 0x20100000. It contains my personal logs also. Eventhough i disable timer/vic ,it hanging in the same output. I hope experts can find the problem. If anyone needs detailed log by enabling all debugzones,i will do that(its too big) But it is hanging as shown below Windows CE Kernel for ARM (Thumb Enabled) Built on Jun 24 2004 at 18:21:58 ProcessorType=0926 Revision=5 sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 801158c0 OEMInit :-> +OEMInit Initialize Interrupts : +OALInterruptInit OALInterruptInit:-> OALIntrMapInit:-> +OALIntrMapInit -OALIntrMapInit OALIntrMapInit:<- Initializing vic: +OALPAtoVA(0xf0000000, 0) -OALPAtoVA(va = 0xa1700000) finished vic : +OALIntrStaticTranslate(1, 26) -OALIntrStaticTranslate static mapping:<- OALInterruptInit: <- -OALInterruptInit(rc = 0) OALTimerInit :-> +OALPAtoVA(0xc0000000, 0) -OALPAtoVA(va = 0xa1300000) Timerbase :-> OALTimerInit :<- -OEMInit +OEMCacheRangeFlush(0x00000000, 0, 0x00000004) -OEMCacheRangeFlush OEMInit :<- Booting Windows CE version 5.00 for (ARM) &pTOC = 80109cac, pTOC = 80192c44, pTOC->ulRamFree = 8020c000, MemForPT = 000000 00 Old or invalid version stamp in kernel structures - starting clean! Configuring: Primary pages: 3570, Secondary pages: 0, Filesystem pages = 1785 +OEMCacheRangeFlush(0x00000000, 0, 0x00000004) -OEMCacheRangeFlush Booting kernel with clean memory configuration: Memory Sections: [0] : start: 8020d000, extension: 00001000, length: 00df2000 Sp=ffffc7cc ARMInit done. Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> Windows CE KernelIn Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> it +OEMCacheRangeFlush(0x00000000, 0, 0x00000001) -OEMCacheRangeFlush Updated eptr->e32_vsize to = 00093000 Scheduling the first thread. 0x Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> 80fff024: KernelInit2: pCurThread=80fff024 hCurThread=00fff266 hCurProc=00fff00 2, KernelInit = 80123860 0x80fff024: Detecting VFP... Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> 0x80fff024: VFP Not Found! 0x80fff024: first = 01ff0000, last = 02000000, Share dDllBas Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> e = 03f90000 0x80fff024: +OEMCacheRangeFlush(0x03f91000, 370937, 0x00000018) 0x80fff024: -OEMCacheRangeFlush 0x80fff024: +OEMCacheRangeFlush(0xc3fff000, 3749, 0x00000018) 0x80fff024: -OEMCacheRangeFlush 0x80fff024: +OEMCacheRangeFlush(0x03fed000, 11848, 0x00000018) 0x80fff024: -OEMCacheRangeF Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> lush 0x80fff024: +OEMCacheRangeFlush(0x03ff0000, 1260, 0x00000018) 0x80fff024: -OEMCacheRangeFlush 0x80fff024: +OEMCacheRangeFlush(0x00000000, 0, 0x00000004) 0x80fff024: -OEMCacheRangeFlush 0x80fff024: +OALPAtoVA(0x40900000, 0) 0x80fff024: -OALPAtoVA(va = 0x00000000) 0x80fff024: Data Abort: Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> Thread=80fff024 Proc=80209540 'NK.EXE' 0x80fff024: AKY=ffffffff PC=8018c9ac(NK.EXE+0x0008c9ac) RA=8018c938(NK.EXE+0x000 8c938) BVA=c2000010 FSR=00000007 0x80fff024: NKDispatchException: returning failure. Flags=0 0x80fff024: Unhandled exception c0000005: 0x80fff024: Terminating thread 80fff0 Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> 24 0x80fff024: Secondary thread in proc 00fff002 (NK.EXE) faulted! 0x80fff024: Terminating process 00fff002 (NK.EXE)! 0x80fff024: Invalid handle: Set=1 Method=9 0x80fff024: +OEMCacheRangeFlush(0x00000000, 0, 0x00000003) 0x80fff024: -OEMCacheRangeFlush 0x80fff024: +OEMCacheRangeFlush(0x03f900 Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> 00, 405504, 0x00000018) 0x80fff024: -OEMCacheRangeFlush 0x80fff024: +OEMCacheRangeFlush(0xc3fff000, 4096, 0x00000003) 0x80fff024: -OEMCacheRangeFlush 0x80fff024: +OEMCacheRangeFlush(0xc3fff000, 4096, 0x00000018) 0x80fff024: -OEMCacheRangeFlush 0x80fff024: Data Abort: Thread=80fff024 Proc=8020 Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> 9540 'NK.EXE' 0x80fff024: AKY=ffffffff PC=80185014(NK.EXE+0x00085014) RA=80184eb0(NK.EXE+0x000 84eb0) BVA=c2000004 FSR=00000007 0x80fff024: NKDispatchException: no CALLSTACK object to continue... 0x80fff024: Unhandled exception c0000005: 0x80fff024: Exception 'Data Abort' Thread=80fff024 AKY=f Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> fffffff PC=00000000 BVA=c2000004 0x80fff024: R0=8014fe94 R1=a0ff5000 R2=00000000 R3=00000000 0x80fff024: R4=c201fa14 R5=8015246c R6=00000000 R7=c2000000 0x80fff024: R8=00000000 R9=00000000 R10=a0ff5000 R11=000001ff 0x80fff024: R12=00000000 SP=c3fff000 Lr=0000000f Psr=8000001f 0x80f Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> ff024: Can't terminate thread 80fff024, sleeping forever 0x80fff024: ERROR: c:\macallan\private\winceos\coreos\nk\kernel \schedule.c line 5288: 0x80fff024: Abandoning CS 802093c0 in PuntCritSec 0x80fff024: NK Kernel: DEBUGCHK failed in file c:\macallan\private \winceos\coreo s\nk\kernel\arm\mdarm.c a Interrupt :-> Timer Interrupt : OALTimerIntrHandler :-> t line 1086 and i have shown my config.bib and oemaddresstable b MEMORY ; Name Start Size Type ; ------- -------- -------- ---- RSVD 80000000 000FF000 RESERVED ARGS 800FF000 00001000 RESERVED NK 80100000 00200000 RAMIMAGE RAM 80300000 00D00000 RAM ; Reserve ZBANK virtual block (No physical memory ; is required to back this virtual range). ; ZBANK 96500000 00100000 RESERVED CONFIG AUTOSIZE=ON KERNELFIXUPS=ON ROMSTART=80100000 ROMWIDTH=32 ROMSIZE=200000 ; @CESYSGEN IF !NK_NKNOCOMP COMPRESSION=ON ; @CESYSGEN ENDIF !NK_NKNOCOMP ; @CESYSGEN IF NK_NKNOCOMP COMPRESSION=OFF ; @CESYSGEN ENDIF NK_NKNOCOMP IF IMGPROFILER PROFILE=ON ELSE PROFILE=OFF ENDIF ; ; ROMFLAGS is a bitmask of options for the kernel ; ROMFLAGS 0x0001 Disallow Paging ; ROMFLAGS 0x0002 Not all KMode ; ROMFLAGS 0x0010 Trust Module only ; IF IMGTRUSTROMONLY IF IMGNOTALLKMODE ROMFLAGS=12 ELSE ROMFLAGS=10 ENDIF ELSE IF IMGNOTALLKMODE ROMFLAGS=02 ELSE ROMFLAGS=00 ENDIF ENDIF DCD 0x80000000, 0x20000000, 16 ; : SDRAM (16MB). DCD 0x81000000, 0x30000000, 1 ; Memory controller. DCD 0x81100000, 0x40000000, 1 ; :DMA controller. DCD 0x81200000, 0x60000000, 1 ; : DISPLAY DCD 0x81300000, 0xC0000000, 1 ; TIMER0 DCD 0x81400000, 0xC2000000, 1 ; UART controller. DCD 0x81500000, 0xC6000000, 1 ; GPIO DCD 0x81600000, 0xCA000000, 1 ; CLOCK DCD 0x81700000, 0xF0000000, 1 ; VIC DCD 0x00000000, 0x00000000, 0 ; end of table Eagerly waiting for your reply... Thanking you... Tag: OsAxsHwTrap problem Tag: 106436
  - 22
    - Hard coding touch calibration Hi, I'm working with wince6.0, PXA270, Mainstone. I want to read touch calibration registry values once after calibration, and after that hard coding them in platform.reg. For this I wrote the following code: LRESULT CALLBACK WndProc(HWND hWnd, UINT message, WPARAM wParam, LPARAM lParam) { PAINTSTRUCT ps; HDC hdc; DWORD lpType; PBYTE lpData; DWORD lpcbData; HKEY hKeytch; int rc; TCHAR szHello[MAX_LOADSTRING]; LoadString(hInst, IDS_HELLO, szHello, MAX_LOADSTRING); switch (message) { case WM_PAINT: hdc = BeginPaint(hWnd, &ps); // TODO: Add any drawing code here... RECT rt; GetClientRect(hWnd, &rt); DrawText(hdc, szHello, _tcslen(szHello), &rt, DT_CENTER); EndPaint(hWnd, &ps); break; case WM_DESTROY: PostQuitMessage(0); break; case WM_CREATE: TouchCalibrate(); //open the keys to gain access to the values rc = RegOpenKeyEx (HKEY_LOCAL_MACHINE, TEXT ("HARDWARE\\DEVICEMAP\\TOUCH"), 0, KEY_QUERY_VALUE, &hKeytch); lpcbData = 1; lpType = REG_DWORD; rc = RegQueryValueEx (hKeytch, TEXT ("CalibrationData"), NULL, &lpType, NULL, &lpcbData); //allocate space lpData = (PBYTE)LocalAlloc(LPTR,lpcbData); if(!lpData ) { RETAILMSG(1, (TEXT("\n\rLocalAlloc Failed\r\n"))); return FALSE; } //Get the key value rc = RegQueryValueEx (hKeytch, TEXT ("CalibrationData"), NULL, &lpType, lpData, &lpcbData); if(rc == ERROR_SUCCESS ) { RETAILMSG(1, (TEXT("\n\rlpData is : %x\r\n"), *(int*)lpData)); } else { PostQuitMessage(0); break; } RegCloseKey( hKeytch ); PostQuitMessage(0); break; default: return DefWindowProc(hWnd, message, wParam, lParam); } return 0; } The value is usually 310035. Now I want to insert this value to platform.reg. I tried to write under [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH] "CalibrationData"=dword:310035 But this doesn't seem to work. It throws an exception "Data Abort", I think it was in the stage of trying to read from the registry. Please help me and explain how to do it. Thanks a lot Tag: OsAxsHwTrap problem Tag: 106430
  - 23
    - Swap ANSI Code Pages Hi! What has to be done to swap the ANSI code page on Windows CE? All available languages have been implemented into the compiled WinCE kernel. They appear in Regional Settings / Your locale. It is possible to swap the locale but it has no effect on the ANSI code page. Registry key HKLM\SOFTWARE\Microsoft\International\ACP is set to 1252 and has to be swapped to 1250. But setting it, flushing and cold booting has no effect. The value is set to 1250 but the active code page remains 1252. So the registry setting seems to be for informational use only. - Is it possible to swap the ANSI code page by an API call? - Is it possible to swap it by altering the registry and reboot? - Is it possible to swap it in platform builder? Kind regards, Benjamin Lukner Tag: OsAxsHwTrap problem Tag: 106429
  - 24
    - Anybody knows Settings for Color display on DaVinci DM644x & Wince Hi all, I am using DaVinci DM644x board and WinCE 5.0. The Display driver is VPBE(Vedio Processor Back End). When executed the Kernel image on Board the Vedio out screen(TV in our case) displays the image in Black & White format. So Anybody knows about how to change this settings to make it colored??? Regards, Anshul. Tag: OsAxsHwTrap problem Tag: 106428
  - 25
    - distorted windows today screen Hi, I am trying to port windows mobile 6.0 on our platform . i am almost successful in doing so. But one problem is that after booting the default windows today screen is garbled but other themes are ok. how to debug this problem ...where shall i look for "windows default" theme files. Thanks in advance regards, Ramana Tag: OsAxsHwTrap problem Tag: 106425

Hi All,

I am facing problem booting WINCE 6.0. I have developed BSP for ARM
platform. Every time I boot my PC hangs at one particular address and
when disassembly at the loc. I get ??? and it is at OsAxsHwTrap
structure.
Does anyone know about OsAxsHwTrap and why it is used.
When my PC points at this location I have checked the threads.
There are three threads created and pc is at KernelSysDebugInit thread
and I see there is thread last error as 0x00000057. Can anyone please
help me resolving this issue.

Thanks.

Top