Need Help: LIB : fatal error LNK1181: cannot open input file 'and'

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Need Help: fatal error LNK1181: cannot open input file 'and' Building a Windows CE .NET 4.2 image for arcom SBC-GX1 board i receive this error message: ---------------------------------------------------------------------------- -------- Windows CE Version (Release) (Built on Jun 7 2002 17:04:51) makefile.def: BUILDROOT is D:\WINCE420\public\ie\cesysgen addlib D:\WINCE420\PUBLIC\IGX1N001\WINCE420\SBC_GX1\cesysgen\sdk\lib\x86\retail\uui d.lib D:\WINCE420\public\ie\oak\lib\x86\retail\ieuuid.lib LIB : fatal error LNK1181: cannot open input file 'and' NMAKE : fatal error U1077: 'addlib' : return code '0x49d' Stop. ---------------------------------------------------------------------------- -------- Why the linker is searching for a file named 'and' ? Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48162
  - 2
    - Problem with project on network drive I have an application that has been added to the FileView tab using "Add New Project". The code that I have added is not actually in the local drive but rather a network drive T:. Now when I build this it occasionally fails in a build step because it has concatenated the local path with the network path C:\WINCE420\PUBLIC\MyPlatform\project\T:\project. This generally happens after a full build of the complete platform. Should I be able to build a project from a network drive? Thanks, J Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48160
  - 3
    - wallpaper version number displayed Hi Using Wince.net and what I get with any wallpaper is 'Windows CE .NET v4.20 (Build 1088 on Feb ???' being displayed 1/4 way up the screen. How can I get rid of this. Regards Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48156
  - 4
    - XIP and demand page Hi, I am confused on XIP and demand page. When I set "IMGMULTIXIP=1", OS image will be built into many *.bin files. Then I use chain.lst to download the OS, I think "demand page" seems be on( I check the remaining memory) When I set "IMGMULTIXIP=", OS image will be built into one NK.bin. Then I download it, I think "demand page" seems be off (I check the remaining memory) Is the above description right ? As I know, XIP and demand page shoud be two different technologies. Can I turn on the XIP and turn off the demand page ? Can I build the OS to the NK.bin when I want to use the demand page ? Thanks. Yu. Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48154
  - 5
    - How to implement IDE driver in WinCE 4.2 Hi I will write an IDE driver on WinCE 4.2 for our chip Can you give me any suggestions Regard -Weiji Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48152
  - 6
    - OEMInterruptEnable() is not getting called Hi, currently i am doing wince.net 4.1 porting to 4.2 for xscale . my OS loads into memory and calls OEMinit And InitClock() but my OEMInterruptEnable() is not getting called with SYSINTR_SMSC. My code was working for 4.1. do i need to do any changes to make it work for 4.2. please Help thanks shyam Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48149
  - 7
    - Internet Explorer registry setting Dear tech guru, I'm building a new Win CE 4.2 Platform. Could you tell me how to modify registry file for enabling and setting the proxy server in Internet Explorer ?? Thanks in advance!! Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48148
  - 8
    - Nand Flash Driver for K9k2G16U0M Chip in WInCE 4.2 .NET Hi All, I am writting device driver for Nand Flash Chip (K9k2G16U0M Chip).I am using Microsoft Platform builder 4.2 .NET. In the Nand Flash K9K2G16U0M Chip,Page size is 1024 words and 32 words as spare area. I want to know the details of this spare area,I mean where the ECC code,Bad Block Information and other information is to be written. Where can i get it's specification ? Anyother suggestion is mostwelcome. Regards, Ajay Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48147
  - 9
    - IEEE1394(Firewire) Source code Hi, Can someone with full CE source codes please tell me what is the following DEBUGCHK about. 4294771428 PID:23fa4b2a TID:e3e71dca 0x83e53c20: Unknown: DEBUGCHK failed in file d:\mckendric\private\winceos\drivers\1394\drivers\port\openhci\ohcipnp.c at line 1799 Thanks in advance. Paul W Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48145
  - 10
    - How to compile for THUMB? Hi, My target platform is build under ARMV4I.( PB 4.2) I would like to build some drivers and applications for THUMB. How can I do it? ( I am building drivers with PB, and Applications with EVC) I looked at PB and EVC options and could not find the way to switch to THUMB. I found a lot of discussion in NG about ARMV4I and THumb, but unfortunately no answer for my problem. Thanks Ilia Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48141
  - 11
    - Link smclib.lib 2 problems.. How do I get smclib.lib included into my platform How do I succesfully link smclib.lib? Since I could not get it in my platform (using ARMVI) I copied it over manually and then tried compiling the smart card device driver... unforutnately I get linking errors. I am using platform builder 4.2. I also tried setting in the project setting an absolute path to the smclib.lib in the common folder. Nothing seems to resolve my link errors. Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48140
  - 12
    - Rectification on previous SAPI problem Excuse me, in the previous message I have been inaccurate. I re-write my message below. Hello, I have linked a program (simpledict.exe) that use speech api on WinCE.NET 4.2. When I debugging it, the initialize instructions: //*********************************************** HRESULT hr = S_OK; CComPtr<ISpRecognizer> cpRecoEngine; hr = cpRecoEngine.CoCreateInstance (CLSID_SpInprocRecognizer); //*********************************************** run right, but the next instructions: //*********************************************** hr = cpRecoEngine->CreateRecoContext(&m_cpRecoCtxt ); //*********************************************** fail. How can I use speech features supplied by WinCE.NET 4.2 properly in my application, and so how can I run properly it? Thank you ! Cancer02 Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48136
  - 13
    - SAPI problem Hello, I have linked a program (simpledict.exe) that use speech api on WinCE.NET 4.2. When I debugging it, the initialize instructions: //*********************************************** HRESULT hr = S_OK; CComPtr<ISpRecognizer> cpRecoEngine; hr = cpRecoEngine.CoCreateInstance (CLSID_SpInprocRecognizer); if( SUCCEEDED( hr ) ) { hr = cpRecoEngine->CreateRecoContext( &m_cpRecoCtxt ); } //*********************************************** run right, but the next instructions: //*********************************************** if (SUCCEEDED(hr)) { hr = m_cpRecoCtxt->SetNotifyWindowMessage( hDlg, WM_RECOEVENT, 0, 0 ); } //*********************************************** fail. How can I use speech features supplied by WinCE.NET 4.2 properly in my application, and so how can I run properly it? Thank you ! Cancer02 Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48135
  - 14
    - I am a question about SL811HS USB Host at Wince .NET 4.2 Now, I am developing a evaluation board using Cyperss SL811HST. I am a question about it. Following specification for our evaluation board: Xscale PXA255 Windows CE .NET 4.2 SL811HST R1.5 SL811HST Win CE Driver Rev. 0.3 I had test to mouse the result is no problem. However, the problem is printer. The printer name is HP inkject 920c. When I check the debugging message, it displayed idVender and idProduct to right. The WAIT_TIMEOUT error is occurd at IssueVendorTransfer() and IssueBulkTransfer()function in usbclient.c file. Please, check the problem. Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48133
  - 15
    - Multi-core debug Hi folks FYI. Check out www.fs2.com - they have brought out a multi-core debug solution, where you can connect multiple DIFFERENT cores and debug them simultaneously .. jm Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48132
  - 16
    - GlobalMemoryStatus Hi All, We are using Windows CE.NET 4.2. We are getting numbers from this API which does not correlate with the actual hardware memory we have. We are considering hardware issue remote possbility for now. The hardware in which we have 64MB RAM gives us following nos : dwTotalPhys = 35102720 dwAvailPhys = 10379264 Now the total physical value looks really strange. The questions I have : 1. How is the GlobalMemoryStatus internally implemented ? Does it rely on some function in OAL/HAL layer ? 2. If just windows implements this function, then how can I explain the above nos ? Any pointers will be really helpful. Regards, Rajiv Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48130
  - 17
    - DHCP Request not working Hi I'm using CE4.2. When I try to download an image thru eboot, I go this problem:(but if I enter subnet mask, it works.) If I boot CE(using another method), DHCP can't get an IP from the server either. the network does work when I use a static ip. Can anyone give me some hint as what goes on? InitDHCP():: Calling ProcessDHCP() ProcessDHCP()::DHCP_INIT DHCP requesting an IP address... -OR- Press a key to enter an IP address in next 5 seconds DHCP Message Received ! !CheckUDP: Not UDP (proto = 0x00000001) DHCP Message Received ! !CheckUDP: Not UDP (proto = 0x00000001) DHCP Message Received ! works if I enter a mask: Enter new subnet mask or CR to use existing mask: 255.255.255.0 ReadSerialIP()::Using IP Address 192.168.1.120, netmask: 255.255.255.0 Sent BOOTME to 255.255.255.255 Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48125
  - 18
    - System hangs on suspend/resume I am trying to configure Power Management on my Au1100 based board with CE.NET. If I Start|Suspend then try to resume with an interrupt, the system hangs. I'm not sure how to interpret the debug output. Here is a copy, can anybody point me in the right direction? 244312 PID:20b2292 TID:e1eeef92 Back from OEMPowerOff 244316 PID:20b2292 TID:e1eeef92 We have the 32kHz oscillator, start it if it is not already running 244174 PID:20b2292 TID:e1eeef92 Using RTCTICK tick source 244175 PID:20b2292 TID:e1eeef92 Calling device manager power proc. 244176 PID:20b2292 TID:e1eeef92 Calling GWES power proc. 244176 PID:a1f67af2 TID:e1eeef92 Returning to normally scheduled programming. 244177 PID:a1f67af2 TID:e1eeef92 Setting Event 420ac8ca, phd = 820ac8c8 244177 PID:a1f67af2 TID:e1eeef92 Setting Event 420acdc2, phd = 820acdc0 244178 PID:a1f67af2 TID:e1eeef92 Setting Event a2053f92, phd = 82053f90 244178 PID:a1f67af2 TID:e1eeef92 Returning from PowerOnSetEvents. 244180 PID:20b2292 TID:420a7862 0x820a8400: OEMIocontrol:: Code=0x10100a8 244180 PID:20b2292 TID:420a7862 0x820a8400: DeviceType: 0x101 244180 PID:20b2292 TID:420a7862 0x820a8400: Access: 0x0 244180 PID:20b2292 TID:420a7862 0x820a8400: Function: 0x2a 244180 PID:20b2292 TID:420a7862 0x820a8400: Method: 0x0 244180 PID:20b2292 TID:420a7862 0x820a8400: OEMIoControl: Unknown IoControlCode 0x10100a8. 244181 PID:20b2292 TID:c1ff9fba 0x81ff5000: SerialDllEntry 244181 PID:20b2292 TID:41e9cdfa 0x81f739a0: SerialDllEntry 244181 PID:20b2292 TID:41e9cdfa 0x81f739a0: +CHub(Root tier 0)::HandleDetach 244221 PID:20b2292 TID:c20365ea 0x81f608b8: SerialDllEntry 244223 PID:20b2292 TID:81ff5fda 0x81ff2000: SerialDllEntry 244225 PID:20b2292 TID:41e9cdfa 0x81f739a0: CHub(Root tier 0)::HandleDetach - status change thread closed in 3 ms 244227 PID:20b2292 TID:41e9cdfa 0x81f739a0: +CFunction(tier 1)::HandleDetach 244224 PID:20b2292 TID:c20365ea Ndisuio: 244229 PID:20b2292 TID:c20365ea Status: Open 0005F930 in power state 4, Status 40010004 ignored 244231 PID:20b2292 TID:c20365ea Ndisuio: 244231 PID:20b2292 TID:c20365ea Status: Open 0005F930 in power state 4, Status 40010005 ignored 244232 PID:20b2292 TID:c20365ea 0x81f608b8: ndisMResetCompleteStage2: Internal reset 244239 PID:20b2292 TID:41e9cdfa 0x81f739a0: !CQueuedPipe(Control)::ClosePipe 002c5420 doesn't exist! Thanks, -- Frank D. Lombardo Turning Point Technology, Inc. Frank_AT_TurningPointOnline_DOT_com Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48121
  - 19
    - CEC File Crashes Platform Builder 4.2? Hey guys. I've been trying to write my own .cec file to adapt a new reference BSP for a PPC platform, and I'm running into problems. I've read all of the CEC documentation in the help file. I started from an existing .cec. I verified that I have a nice unique CECInfo field. I've verified that all of my drivers have ComponentType fields that match existing ones exactly (like "Serial"), or they're completely new and unique. I've verified that all of my Implementations and BuildMethods have unique GUIDs. I'm able to load this in the CEC editor, and import it into my catalog. I can view all of my components in the catalog. However, as soon as I try to create a simple platform based on this new BSP, Platform Builder throws an exception. I do the following steps: 1. Start the "New Platform" wizard from File->New Platform. 2. Hit "Next" to get past the Step 1 screen. 3. Select my "NewBSP" from the Available BSP's screen in Step 2. 4. I select the "Mobile Handheld" configuration from the "Available configurations" option. I also enter the name "NewPlatform" in the "Platform Name" field. I then hit next. 5. I remove everything from the "Application and Media" screen, just for safety. (I didn't do this originally.) I then hit next. 6. I de-select everything from the "Networking and Communications" screen, just for safety. (I didn't do this originally.) I then hit next. 7. I then hit finish. After doing this, I can see PB doing something, then I see the "Copying sample configuration files..." status at the bottom. Then, I get: cepb.exe - Application Error The instruction at "0x5119f6fd" referenced memory at "0x00000000". The memory could not be "read". In other words, someone de-references a null pointer. Needless to say, I'm seeing the same problem with many other configurations, too. I've even completely cleaned my catalog by running the "cleandb.bat" and re-importing my .cec file. Has anyone seen this before? Does anyone have any ideas what I could be doing wrong in my .cec file? Anything to look for? I've been all over this .cec file, and it should work. I've done other custom .cec files before, and I haven't run into this. Any help would be greatly appreciated guys. This is starting to drive me a little bit crazy. Well, ok, maybe a little bit MORE crazy. I've been using Platform Builder long enough that I'm already a Kb short of a meg, if you know what I mean. ;) Mark Murawski Vocollect, Inc. Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48113
  - 20
    - expired trial I've been evaluating Ce 4.2 for use with an embedded project I am working on. As it was a long evaluation the 120 day trial on PowerBuilder finally expired. We are currently buying a license but since PB has already expired where do I install the new license? Everytime I try to launch PB it says 'trail expired' on a popup. When I close the popup PB shuts down. Do I have to unistall PB and reinstall? I can do it but I already have alot of items custom configured in it and setting them back up would be a real pain Anyone have any idea how to license Power Builder after the trial has expired? Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48111
  - 21
    - How to setup project in private folder that replaces part of public folder I am going to be customizing the Microsoft Bluetooth GUI and would like to know how best to setup this custom project. I would like to do so without manipulating any files in the public directory if possible. Only some of the files in OAK/DRIVERS/NETUI will be modified and possibly some in OAK/DRIVERS/BLUETOOTH/ I am sure I could get the desired effect by editing the DIRS and SOURCES files but that would be editing files in the public directory. So, how can I set up the build so that it builds my modified code and not microsofts defaults with modifying the public directory? THANKS!!! Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48110
  - 22
    - LP-E CF Card doesn't work!! Hi all, I am working on a DBPXA255 based platform but it hasn't the SA-1111 chip, so it has the CF socket conected like that is in the Sandgate platform. I have a LP-E Ethernet card and I have addapted the Eboot's code and now I can download the WinCE image through the LP-E using the NE2000's code that comes with the EBOOT. But now I am trying to use it to connect my platform with the Ethernet using the NE2000 driver that comes in the C:\WINCE410\PUBLIC\COMMON\OAK\DRIVERS\NETCARD\NE2000 directory but it doesn't work. I have addapted the PCMCIA driver to use it like in the SANDGATE (and I have supported the BCR register, too). When I use a memory CF card I can read and write in it correctly so I think that the PCMCIA driver is working correctly. I have checked it one and another time but I don't see anything wrong. Nevertheless, I have seen that there's a ne2000.c file in the C:\WINCE410\PLATFORM\XSC1BD\DRIVERS\PCMCIA directory. Is this file used somewhere??? I think no, but should I use this instead of the NE2000 driver that I am using?? My other question is if I need to change the NE2000 driver's registry entries. I have proved to adecuate the default InterruptNumber and IOBaseAddress to my target device but it continues the same way. If I download a debug image with the KITL activated (through the SMSC LAN91C96 device), I don't see any strange debug messages and everything seems to be all right. I have proved with the DHCP enabled and it doesn't found the default gateway IP. I have proved to disable the DHCP and to fix a static IP but I cannot ping that IP from my host computer. And if I try to ping to a IP address from my target device, I found the next message: "PING: transmit failed. error code 11010". Should I have to change something more or do I need a specific driver to make it work?? Any advice would be appreciate. Thanks in advance, Lur Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48109
  - 23
    - MOUHID attaching problem Hi, I'm debugging the USB UHCI driver for SL811HS on WCE4.2. If USB mouse is attached at or after startup, attaching UHCI device passes. In both cases, there are no reactions on mouse moving/pressing. I guess I included all necessary reg settings: [HKEY_LOCAL_MACHINE\Drivers\USB\LoadClients\Default\Default\3\Hid_Class] "DLL"="USBHID.DLL" "Prefix"="HID" "Index"=dword:1 [HKEY_LOCAL_MACHINE\Drivers\USB\ClientDrivers\Hid_Class] "DLL"="USBHID.DLL" "Prefix"="HID" [HKEY_LOCAL_MACHINE\Drivers\HID\LoadClients\Default\Default\1_2\Mouse] "DLL"="MOUHID.DLL" Still, I can not see that mouhid is activated. Should there be print: "MOUHID DllEntry attach"? Thanks in advance for any help, Dusko Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48106
  - 24
    - Locking the SmartPhone 2002/2003 A question from the customer of one of my affiliates (sorry, I never saw SmartPhone personally, so, the question can be really stupid. Sorry). Is there any way to add the "Workstation Locked" functionality - as in NT4/w2k - to SmartPhone 2002/2003? The phone must awaken as locked, and require the password entrance before any operations. How can such an app be developed? There is some "System Password" in SmartPhone. Is it secure enough? Or just a toy? -- Maxim Shatskih, Windows DDK MVP StorageCraft Corporation maxim@storagecraft.com http://www.storagecraft.com Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48102
  - 25
    - What is the best way to maintain two nearly identical builds? Hello, I currently have a working Platform in Windows CE .NET 4.1. However I want to add a build identical to the one I have currently, the exception being DCOM w/ Remote Access instead of Minimal COM support. How can I add this without creating an entire new platform? Thanks, George Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48100
- Next
  - 1
    - multiple serial ports, one driver [SER_CARD2] I'm trying to figure out how SER_CARD2 reports two COMx: devices. (I'm assuming it does actually do that. Reading past posts, it would seem that it should use ActiveDevice(Ex) to add additional devices, but I don't see anything unusual like that in the SER_CARD2 sources I'm trying to develop a driver for a multiple port serial PCMCIA card. The way I understand it, I'll get one insert event, and therefore one call into the XXX_Init function no matter how I structure the registry keys. XXX_Init will need to generate any ports in addition to the first port Is there something I'm missing Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48099
  - 2
    - Using Interrupts on IXDP425 I meant to post this here instead of app.development so I'm reposting it here... I have been given the task to measure how real-time WinCE 4.2 actually is. The methodolgy is essentially the same as what is discussed in http://msdn.microsoft.com/library/default.asp?url=/nhp/Default.asp?contentid =28000437. The primary reason I have to do this is some people doubt that it'll stay realtime while communicating over Ethernet. To summarize, I want to hook a signal generator to an input which will give me an interrupt. Eventually I want to have an application signaled that this input event occurred so I surmise that I'll need an ISR and an IST. Does anyone have any documentation on what Intel acually did with the BSP as far as interrupts? The Intel software library leads me to believe that I need to use ixOsServIntBind() to setup a callback function for that interrupt. Is that callback the ISR? I did a search for HookInterrupt() to look for examples of where in the Intel code this was used and I came accross the following comment in cfw_ixp425.c: *IXDP4XX NOTE: HookInterrupt() is not needed because we only have a single IRQ input. ALL IRQ's are routed to OEMInterruptHandler(). So I'm confused about what I actaully need to do to accomplish this task. Do I have to ask for the correct interrupt from the OELInterruptHandler()? Any and all help is appreciated. Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48096
  - 3
    - Messenger Sign in prolem, MSNP8, QFE KB826650 I am using Platform Builder 4.2 and have included Windows Messegner Applicatio When trying to sign in to MSN messenger I get the error "...sign in failed since the service is temporarily unavailable, pls try later Apparently this is due to the MSNP8 protocol requirement which is available in the QFE KB826660. However I could not locate the QFE KB826650 on the downloads site Can someone help I have added all the QFEs including 2003Q4 to my platform w/o any luck Thank Rahul Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48094
  - 4
    - browser other than ie? Hi, I've got a problem with the Internet Explorer ( I think it's 6.0) in Windows CE.net 4.2. I created a webinterface which contains a page that has to be refreshed every second. Unfortunately IE shows a white background while loading the page and this flickering looks terrible. If I use Mozilla, this does not happen, actually one does hardly realize that the page is updated. Does anyone know whether it's possible to run Mozilla on WinCE? Or whether another Version of IE handles this in a better way? Thanks. Myriam Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48092
  - 5
    - Signed applications, RSAENH.DLL and common.bib I have a platform in which I've implemented OEMCertifyModule, and all exes and dlls have to be signed with our private key before they will run. Unfortunately our main application needs RSAENH.DLL for some crypto stuff. If I sign this, it detects it has been modified and refuses to run (correctly). At the moment my CertifyModule lets this dll through by recognising its name - this is a security loophole. If I could put RSAENH.dll in the MODULES section instead of the FILES section of common.bib, all would be well (it would be implicitly trusted). Obviously I don't want to change common.bib - how can I change config.bib to override common.bib? Or is there a better solution? Thanks for any answers. Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48091
  - 6
    - FAT defragmentation Hi all, I have some Questions about the object store (SRAM) on CE devices running OS: Windows CE 3.0, 4.1 or 4.2 Question n°1: What filesystem does this object store use? Is this a FAT file system or other type? Question n°2: Does the object store get defragmented after a lot of file transfers, (copy/delete/move/read/write etc) Question n°3: Will ReadFile/WriteFile/FindFirstFile API functions take longer after a while to read/write/find a file? Question n°4: Will the chance to get RAM corruption on Read/Writes and Power fails increase after a lot of time (defragmentation)? Question n°5 : If needed, can we get a Object store deframentation tool running on Windows CE ? Thanks in advance, Peter. Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48089
  - 7
    - Basic requirements for DVD playback Hi, Q1. Does any one know what the basic requirements are for DVD playback? Here is my idea: 1. DVD drive x 1 2. Hardware decoder or Software decoder supports DVD-Video format x1 Q2. Does WinCE.NET 4.2's Media Player 9 support DVD-Video format? I thought WinCE.NET 4.2's Media Player 9 requires a codec to do DVD playback. Thanks for helps. Jason Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48086
  - 8
    - RaiseException at device.exe Hallo, I'm using PB 4.2 and sometimes the system on the target crashes. Bevore the crash I get the following debug messages: PID:c0faf84e TID:c0f07872 RaiseException: Thread=80f0063c Proc=80718ee8 'device.exe' PID:c0faf84e TID:c0f07872 AKY=00000009 PC=00000000 RA=80248a1c BVA=80718ee8 FSR=00000000 The thread 80f0063c is running in one of my dlls. If I unload this dll the RaiseException occure in an other dll. What is this RaiseException? Who call it? What can I do against it? Harry Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48078
  - 9
    - startui building and apply. hi everyone I'm using pxa255 and ce4.2. I want to change backgourd windows logo image. next, it's scheme that apply building. 1> I modify startui\startui.rc file. : IDB_WINDOWSCE BITMAP DISCARDABLE "windowsce001.bmp" windowsce001.bmp is similar to original image .then it is not same thing. 2>I opened "open build release directory " and changed directory of ".....\common\oak\drivers\startui\ 3> execute commnand ( sysgen.bat and build -cfs and rebuild) 4> download image(nk.bin) 5> check changing background logo. but didn't change backgound logo. anyone reply to my mistakes. thanks in advance. Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48077
  - 10
    - Display driver debug problem Hi everyone, The pc/104 board I'm working with did not come with a Windows CE driver and was using the default flat driver. This caused every screen operation to take place extremely slowly, so I asked the VGA chip manufacturer (Silicon Motion www.smi.com) of the board to give me the Windows CE driver. They sent me the dll file and the cec file for this chip, and using cec editor I created my own driver cec file. I copied the ddi_smi.dll file to $(_WINCEROOT)\platform\cepc\DRIVERS\DISPLAY\SMI directory and created the dirs file in the display directory to include the subfolders. The BuildRel method for this is #COPY("$(_WINCEROOT)\platform\cepc\DRIVERS\DISPLAY\SMI\ddi_smi.dll", "$(_FLATRELEASEDIR)") I then refreshed the catalog and added this new driver to my platform. I made a clean build which gave the attached output: /////////////////////////////////////////////////////////// . . . When I downloaded my image to the CEPC, I received the following error: //////////////////////////////////////////////////////////////////////////// Loaded symbols for 'C:\WINCE410\PUBLIC\REGAPPDENE2\RELDIR\CEPC_X86DEBUG\GWES.EXE' 4294784007 PID:21ef5ef6 TID:21fb27d2 0x81ef51a8: Grow Gdi handle table from 0 to 64 4294784056 PID:21ef5ef6 TID:21fb27d2 0x81ef51a8: >>> Loading module ddi.dll at address 0x01EE0000-0x01EFE000 Loaded 'C:\WINCE410\PUBLIC\REGAPPDENE2\RELDIR\CEPC_X86DEBUG\DDI.DLL', no matching symbolic information found. 4294784063 PID:21ef5ef6 TID:21fb27d2 0x81ef51a8: Unknown: DEBUGCHK failed in file d:\jameson\private\winceos\coreos\gwe\mgdi\base\.\driver.cpp at line 327 /////////////////////////////////////////////////////////////////// Both ddi.dll and ddi_smi.dll are in the _FLATRELEASEDIR and they're both in the nk.bin file (I checked with viewbin.exe). What might be causing this problem? Thanks in advance, Selin Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48075
  - 11
    - ActiveSync can't transfer many large files??? My platform is : ARM920T, WinCE 4.2 .NET. My workstation is : Win 2K, and ASync 3.7 with USB 1.1 My PC recognize CE device through USB well, and ASync can tranfer many small files without fault. But Async always failed when I send many large files to my device(5~6MB, 50 files). I have made an effort to search the reason, and I found some hints. When transfer failed, CRC error occured like this. ============================================================================================ 189078 PID:43e330ea TID:3b2e402 0x83b2bc8c: AsyncMac: CRC Error 0x4222 != 0xF6F2 189088 PID:43e330ea TID:3b2e402 0x83b2bc8c: AsyncMac: +ProcessEndOfPacket: length=46 189098 PID:43e330ea TID:3b2e402 0x83b2bc8c: AsyncMac: MaxRxThread: Have good packet 189108 PID:43e330ea TID:3b2e402 0x83b2bc8c: PPP: CCP:rx:TOSS PKT - BAD COHERENCY (got 607a expected 78 189118 PID:43e330ea TID:3b2e402 0x83b2bc8c: AM: +MpSend(4C030, 58D30) 189128 PID:43e330ea TID:3b2e402 0x83b2bc8c: AM: MpSend: About to frame packet (6): 189138 PID:43e330ea TID:3b2e402 0x83b2bc8c: 0000 80 FD 0E 01 00 04 - ...... 189148 PID:43e330ea TID:3b2e402 0x83b2bc8c: -AssemblePPPFrame: Frame: start=58d68 end=58d72 length=a 189158 PID:43e330ea TID:3b2e402 0x83b2bc8c: AM: -MpSend: Returning 103 189168 PID:43e330ea TID:3b2e402 0x83b2bc8c: Mac: RecvPacket size now 0 bytes, pCurr=5a710 189178 PID:43e330ea TID:3b2e402 0x83b2bc8c: ->mac:RX 0 bytes, spaceLeft=1554 pCurr=5a710 189188 PID:43e330ea TID:83b2bf82 0x83b26400: AM: MpSend wrote 10 bytes 189308 PID:43e330ea TID:3b2e402 0x83b2bc8c: ============================================================================================ I know that 'USB bulk transfer' ensure reliable exchange of data on hardware level. So then, MS Async layer(CE device) lose some data??? It is a BUG in WinCE 4.2 .NET?? Comment, please.... Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48074
  - 12
    - ActiveSync can't transfer many large files??? My platform is : ARM920T, WinCE 4.2 .NET. My workstation is : Win 2K, and ASync 3.7 with USB 1.1 My PC recognize CE device through USB well, and ASync can tranfer many small files without fault. But Async always failed when I send many large files to my device(5~6MB, 50 files). I have made an effort to search the reason, and I found some hints. When transfer failed, CRC error occured like this. ============================================================================================ 189078 PID:43e330ea TID:3b2e402 0x83b2bc8c: AsyncMac: CRC Error 0x4222 != 0xF6F2 189088 PID:43e330ea TID:3b2e402 0x83b2bc8c: AsyncMac: +ProcessEndOfPacket: length=46 189098 PID:43e330ea TID:3b2e402 0x83b2bc8c: AsyncMac: MaxRxThread: Have good packet 189108 PID:43e330ea TID:3b2e402 0x83b2bc8c: PPP: CCP:rx:TOSS PKT - BAD COHERENCY (got 607a expected 78 189118 PID:43e330ea TID:3b2e402 0x83b2bc8c: AM: +MpSend(4C030, 58D30) 189128 PID:43e330ea TID:3b2e402 0x83b2bc8c: AM: MpSend: About to frame packet (6): 189138 PID:43e330ea TID:3b2e402 0x83b2bc8c: 0000 80 FD 0E 01 00 04 - ...... 189148 PID:43e330ea TID:3b2e402 0x83b2bc8c: -AssemblePPPFrame: Frame: start=58d68 end=58d72 length=a 189158 PID:43e330ea TID:3b2e402 0x83b2bc8c: AM: -MpSend: Returning 103 189168 PID:43e330ea TID:3b2e402 0x83b2bc8c: Mac: RecvPacket size now 0 bytes, pCurr=5a710 189178 PID:43e330ea TID:3b2e402 0x83b2bc8c: ->mac:RX 0 bytes, spaceLeft=1554 pCurr=5a710 189188 PID:43e330ea TID:83b2bf82 0x83b26400: AM: MpSend wrote 10 bytes 189308 PID:43e330ea TID:3b2e402 0x83b2bc8c: ============================================================================================ I know that 'USB bulk transfer' ensure reliable exchange of data on hardware level. So then, MS Async layer(CE device) lose some data??? It is a BUG in WinCE 4.2 .NET?? Comment, please.... Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48073
  - 13
    - about sis550 driver for driver sis550 mainboard(BCOM int TaiWan) ,I user platform builder 4.2 and the third BSP ICOP_Vortex86.Then user IDE hard disk boot NK.bin.the ATAPI PCI/IDE Storage Block Driver and FAT File System have been add.but I cann't see hard disk int mycomputer ,why?.If I used something read or write on hard disk or send to network,system down-and-out.why? network card rtl8100b,driver rtl8139.Thanks!Can somebody help me to find ATAPI driver for sis550 IDE and rtl8100 for ce.net? Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48065
  - 14
    - Debug Break Hi, I have a platform that has been working for weeks. Suddenly, I am getting this error (look at the last line below). I have included some of the preceeding debug lines as well. Thanks, Nick. 0x836a7000: HTTPD: HTP_IOControl cannot process, IOCTL_SERVICE_START, state != starting up, serviceState=2 0x83610800: UPNPSVC: EventSourceWorkerThread: Sleeping... 0x83612800: >>> Loading module ieceext.dll at address 0x03220000-0x0322C000 (RW data at 0x01F19000-0x01F19280) Loaded symbols for 'E:\WINCE420\PUBLIC\WIPICS686_4\RELDIR\686COREDEBUG\IECEEXT.DLL' 0x83612800: >>> Loading module urlmon.dll at address 0x03080000-0x030D5000 (RW data at 0x01F0B000-0x01F0D470) Loaded symbols for 'E:\WINCE420\PUBLIC\WIPICS686_4\RELDIR\686COREDEBUG\URLMON.DLL' 0x83612800: >>> Loading module msxml3.dll at address 0x01D90000-0x01E67000 Loaded 'E:\WINCE420\PUBLIC\WIPICS686_4\RELDIR\686COREDEBUG\MSXML3.DLL', no matching symbolic information found. 0x835d3800: Explorer: HasMouse = TRUE 0x835d3800: Grow Gdi handle table from 256 to 320 0x835d3800: HIDE: 1, 1, 1, 0 - (320, 240) - (-6, 448, 646, 486) 0x835d3800: Explorer(V2.0) taskbar thread started. 0x835d3800: Explorer(V2.0) using old style message pump. 0x835c4c5c: NOTIFICATION::XCeRunAppAtEvent 0x835c4c5c: NOTIFICATION::XCeRunAppAtEvent - clearing system event registration for \\.\Notifications\NamedEvents\DSTTzChange 0x83a1c800: NDISPWR:: Found adapter [CISCO1] 0x83a1c800: NDISPWR:: Found adapter [PCI\RTL81391] 0x83a1c800: NdisPower:: Successfully register for notification! 0x835c4c5c: NOTIFICATION FYI::FindSystemEvent found record 00000000 [or none if 0] for \\.\Notifications\NamedEvents\DSTTzChange among system watches 0x835c4c5c: NOTIFICATION::XCeRunAppAtEvent 0x835c4c5c: NOTIFICATION::XCeRunAppAtEvent - clearing system event registration for \\.\Notifications\NamedEvents\DSTTimeChange 0x83a21a88: >>> Loading module netui.dll at address 0x03CA0000-0x03CE3000 (RW data at 0x01FCB000-0x01FCF368) Loaded symbols for 'E:\WINCE420\PUBLIC\WIPICS686_4\RELDIR\686COREDEBUG\NETUI.DLL' 0x835c4c5c: NOTIFICATION FYI::FindSystemEvent found record 00000000 [or none if 0] for \\.\Notifications\NamedEvents\DSTTimeChange among system watches 0x835c4c5c: NOTIFICATION::RemoveAppRunAtTime::Starting Database Sweep... 0x835c4c5c: Unknown: DEBUGCHK failed in file d:\mckendric\public\shell\oak\hpc\explorer\main\.\dst.cpp at line 578 Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48060
  - 15
    - Cassiopeia E105 Chips Hello, ¿Anyone here has any idea about the Graphics/Audio and CompactFlash chips that are used in the Cassiopeia E105? I'm a student playing with this piece of hardware and I would like to know any (even small) info about those chips in the Cassiopeia E1XX series. ¿Maybe any Casio engineer reading? Please drop me an e-mail, just to talk :) Thank you! Luis G. Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48054
  - 16
    - linking GWES I'm trying to come up with an alternate approach to replacing GWES components like calibrui and oomui. (i.e. one that works and is more convenient to test). I've already created a method for replacing resources, so I just need a way of getting my code into the build. It seems to me that I should be able to put my calibrui.lib first in the list of TARGETLIBS (in GWE\BUILDEXE\SOURCES) and then my code should override the default calibrui.obj (in gwes.lib). But it's not happening! It doesn't seem to matter what I do, the calibrui.obj from gwes.lib is always being used. Does anybody know what's going on here? How do I force the linker to take a module from one library instead of another? -- Shawn Baker shawn_AT_frozen_DOT_ca Frozen North Computing Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48048
  - 17
    - Wireless channel changing I've read some books on 802.11b and understand that there are several channels that the protocol uses. They overlap to some degree and the definition of what frequencies the channels occupy are slightly different between countries. There are 2 or 3 that are universal (I think 5 & 6). So, I've added a Cisco 350 card to my CE.NET 4.2 platform. Can I change the channel it operates on? How? Is this a registry setting? Is there a config app? Thanks, Nick. Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48043
  - 18
    - [Q - Please] "net use" problem : it always returns error code 53 (ERROR_BAD_NETPATH) Hi, there. Can you please help me ? Thanks, in advance. I want to access my PC's shared folder from my target CE machine. However, whenever I try "net use share \\192.168.1.10\shared", it returns error code 53(ERROR_BAD_NETPATH). My Pc(\\192.168.1.10) and target CE machine(\\192.168.1.20) is connected by crossed ethernet cable. The ping command (ping 192.168.1.10) always succeed. I checked the contents of my nk.bin (by viewbin command on my PC) and I found netbios.dll, redir.dll, net.exe included in the nk.bin. I already changed my device name from default "WindowsCE" to "WindowsCE0707". I can not understand why it says "ERROR_BAD_NETPATH". what is wrong with "\\192.168.1.10\shared" ? Is there any problem on my configuration ? Is there any component I forgot to include ? Is there any registry I should consider ? I really need your help. Please help me, can you ? Thanks in advance. Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48036
  - 19
    - Debugger problem CS8900A instable Hi all, we have PXA255 based platform with a CS8900 ethernet controller and using Windows CE V4.2. NDIS ethernet driver works fine. The debugger, sources from PB V4.2, works. We can download image and debugger start to communicate with PB. But after a while or when starting a remote tool the communication is lost. I tried different things like polling and interrupt mode for the debugger, but no of them seems to work stable. Now I have found out when I set all KITL debug zones and set the serial port to pass these debug messages. The ethernet debugger is working stabile. Does anyone has a idea? Maybe it is a timing problem. With the KITL messages over serial port, ethernet debugger works a little bit slower. Many thanks for your help or advices. Mike Engel Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48033
  - 20
    - driver development I have written device drivers for my CEPC platform that load and function correctly when compiled under debug, but when they are compiled under release, the driver don't load. I verified this by loading a registry viewing application, and viewing the registry. The drivers do not show up in the active list. They are PCI drivers, and their instances do show up under Builtin\PCI\Instance. I am assuming that this means that the devices have been enuermated correctly on the PCI bus. What am I missing? Marc Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48030
  - 21
    - USB Mass Storage I want to connect a disk on key (usb )to my platform With the right USB host driver uhci I can access the disk as DSK1: using createfile. But I can't use it as a classical disk. The fat component does not seem to work. Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48025
  - 22
    - Serial Port open Failure Hello, I have a problem with some code that opens a com port and writes to it. I run my application from "Target -> Run Programs". The port opens successfully and I can write to it. If i take the same application and put it onto my hard disk and try to run it it fails. The call that I make and the one that fails is:- // Open the serial port. hPort = CreateFile (lpszPortName, GENERIC_READ | GENERIC_WRITE, 0, NULL, OPEN_EXISTING, 0, NULL); The failure is hPort == INVALID_HANDLE_VALUE. The value for dwError = GetLastError (); is 55 From the help page this is:- 55 The specified network resource or device is no longer available. ERROR_DEV_NOT_EXIST Can anyone explain why it works when I debug from within PB but fails when I run from hard disk. It is exactly the same executable and same com port. Thanks, BM Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48021
  - 23
    - Lockup after boot I attempted to follow the directions in the thread on 2/2/2004 'How to show network computers'. I used the net use * \\<computername>\sharename command and got the point where I was asked for my password and stuff and then I was asked if I wanted to save those changes, I believe I hit 'Y' for yes. I am now stuck in a state where when I load a new image of CE via ethernet to my IXDP425, I am locked up. I changed to a debug build of CE and caught a 1st Chance Exception in OHCI2.DLL at 0x80000002 DataType Misalignment. It took me to Line 409 of USB\HCD\OHCD2\CPIPE.CPP so it was obvious that I'm crashing somewhere in the USB stuff. I unplugged my USB mouse and keyboard and now I can boot. I replugged my mouse and I can now navigate the filesystem. Under my \NOR Flash\Documents and Settings\ I have a system.hv and default.mky. I know that system.hv is the system hive but I don't know what default.mky is. My theory is that when I tried to save the settings it wrote something to the registry that wasn't good. I'm thinking it would be a good thing to delete my system.hv and default.mky. Any thoughts? Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48012
  - 24
    - Book about Windows platform builder Does exist ? Where to find detailed informations ? Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 48008
  - 25
    - About MediaPlayer I meet with a troubling thing that if we set Microsoft's Mediaplayer in 'repeat' mode and play a music from a removable storage device. If the device is removed during the playing, and Mediaplayer will crash the system with too much error message box. Is it a bug of Microsoft MediaPlayer? Qinghai Tag: Need Help: LIB : fatal error LNK1181: cannot open input file 'and' Tag: 47993

I receive this message when a try to build a windows ce .net 4.2 image for
an arcom sbc-gx1 board:

----------------------------------------------------------------------------
--------

Windows CE Version (Release) (Built on Jun 7 2002 17:04:51)

makefile.def: BUILDROOT is D:\WINCE420\public\ie\cesysgen

addlib
D:\WINCE420\PUBLIC\IGX1N001\WINCE420\SBC_GX1\cesysgen\sdk\lib\x86\retail\uui
d.lib D:\WINCE420\public\ie\oak\lib\x86\retail\ieuuid.lib

LIB : fatal error LNK1181: cannot open input file 'and'

NMAKE : fatal error U1077: 'addlib' : return code '0x49d'

Stop.

---------------------------------------------------------------------------

Why the linker is serching for a file named 'and' ?

Top