NVIDIA display driver problem

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Synchronization on OAL I hope someone can suggest a solution to this. I have an RTC chip along with other stuff on the I2C bus (XScale). I need to access RTC in OAL (OEMSetRealTime and OEMIoControl(KERNEL_IOCTL_INIT_RTC)). Both of these routines can be invoked by users willy-nilly while the system is running. At the same time, I have other drivers accessing other stuff on I2C bus. I have a library (.lib) that the OAL routines and the I2C driver for the rest of the world link in to communicate with the I2C. It appears (I learned this the hard way) that the OAL routines get linked into the kernel (who coulda thought?). The kernel does not link anything else of value to those of us wishing to do synchronization with the driver, except for a critical section. Unfortunately, critical section is no good when trying to synchronize between processes (as per CE documentation), unless the critical section is in a DLL that the processes share. So here is my dilemma. Is it safe to make the library into a DLL and link a DLL into the kernel (or to be more precise, link the stub into the kernel with the expectation that the DLL will be loaded by the kernel later)? Or can I dare link in coredll.lib and use things like semaphores for synchronization? The only other alternative I can think of is roll my own semaphore using a fixed RAM location (could get nasty) or an unused peripheral status register (what an ugly hack)... This problem cannot be that exotic - I imagine tons of platforms out there have an I2C based RTC and at least a serial eeprom or something else accessible to user on the I2C. Can anyone suggest a workable solution bettern than the hack I described or perhaps share an approach that worked in the past? Thanks in advance, Mike Goltsman Tag: NVIDIA display driver problem Tag: 43103
  - 2
    - PPC 2003 Software Adaptation Kit? Hey guys. I've been trying to compile some of the BSPs we received from Intel for our NBMMNS2BVS DVK eval board, and I'm a little bit confused about something. One of the BSPs, the "Windows Mobile 2003 for Pocket PC" BSP, says that it requires the "Microsoft Windows Mobile 2003 for Pocket PC Software Adaptation Kit" to properly compile the BSP. Now, I've built platforms before, so I originally just ignored this, added the "Mainstone.cec" in the platform directory to my catalog manually, and attempted to build a platform using plain-old Platform Builder 4.2. I quickly started running into different errors that looked like there were some system headers missing. I couldn't find them anywhere on my PC. So, I fell back to their build instructions, and it quickly starts referencing a "bldplat.bat" that wasn't even included with the BSP. My current course of action is to continue trying to build the platform through Platform Builder in the usual way by removing components from my configuration that run into problems. However, this already isn't working too well because the first thing that I had problems with was the audio driver, and I need that more than I need the display. If anyone could tell me what this "Software Adaptation Kit" is, or where I can get it (none of us here could find it on Microsoft's site), I'd greatly appreciate it. Thanks in advance guys. Mark Murawski Vocollect, Inc. Tag: NVIDIA display driver problem Tag: 43102
  - 3
    - PB3.0 eval Hi all, Does anyone know if there's an eval of PB3.0 available. I can only get PB4.2 ? MTIA Mark Tag: NVIDIA display driver problem Tag: 43097
  - 4
    - How to build wininet.lib in pb410? I use PXA250 BSP build SDK. In eVC4.0, I build MFC hello Application, LINK : fatal error LNK1104: cannot open file 'wininet.lib' how to build wininet.lib in pb410? Tag: NVIDIA display driver problem Tag: 43095
  - 5
    - propagating changes in project.reg & platform.reg Hello, I've been operating under the assumption that when I make a change in either platform.reg or project.reg, all that's needed to propagate these changes into my image is to call Make Image from the build menu. Lately though, I've been coming across cases where my changes don't make it to the image. An example would be serial port settings, or display adapter parameters such as resolution, pixel depth, etc. So is my assumption correct and my problem elsewhere, or was my assumption wrong all along? Also, which is processed last between platform.reg & project.reg? What I mean is, if the same reg key is assigned different values in both of these files, which will overwrite which? Thank you. Tag: NVIDIA display driver problem Tag: 43094
  - 6
    - propagating changes in project.reg & platform.reg Hello, I've been operating under the assumption that when I make a change in either platform.reg or project.reg, all that's needed to propagate these changes into my image is to call Make Image from the build menu. Lately though, I've been coming across cases where my changes don't make it to the image. An example would be serial port settings, or display adapter parameters such as resolution, pixel depth, etc. So is my assumption correct and my problem elsewhere, or was my assumption wrong all along? Also, which is processed last between platform.reg & project.reg? What I mean is, if the same reg key is assigned different values in both of these files, which will overwrite which? Thank you. Tag: NVIDIA display driver problem Tag: 43093
  - 7
    - What's the difference of pocket pc 2002 and wince I have installed a CF camera on pocket pc 2002.. it work.. but when i installed in wince 4.1.. and install the driver and software.. it can't run the application .... what's problem? Tag: NVIDIA display driver problem Tag: 43090
  - 8
    - What is GetForegroundKeyboardTarget() function for ? Good morning experts, inside the code for taskman shell for thin client in Platform Builder 4.1 there is place where a function GetForegroundKeyboardTarget(), mentioned in header is called : ... SendMessage(GetForegroundKeyboardTarget(),WM_KEYUP, VK_CONTROL, NULL); ... I have searched the documentation and only had found, that this function is a part of core.dll and declaration for this function is at pwinuser.h. Can anyone tell what this function is for and what it is supposed to do ? In our case this function call appears to hang the active connection to Citrix Metaframe FR2 from the device using ICA protocol. Best regards Sergei Tag: NVIDIA display driver problem Tag: 43086
  - 9
    - The problem of PS/2 keyboard on CE4.2 Hi all, I use the X86 platform on CE4.2. There is a problem on PS/2 keyboard. The problem is that the PS/2 keyboard driver will output the wrong scan code after do suspend/resume. After do some testing, I find that the wrong scan code is caused by the misjudgement of the ps/2 driver. The driver think that the keyboard is a AT-type keyboard, but actually I'm using a XT-type keyboard. The problem only happens after do suspend/resume. Does anyone know how to transform the AT-type scan code into the XT-type scan code? Thanks in advance! Tag: NVIDIA display driver problem Tag: 43084
  - 10
    - How to set the ativity time of mouse right button in AYGSHELL API SET? Dear Sir. I included AYGSHELL API SET component at CE 4.2 When I clicked the left button of mouse or touch during 1 sec, It was displayed the right button message box. I want to change the pressed time from 1 sec to 2sec. Please let me know it. -- Thanks., -------------------------------- Skyblue Ahn /SW Team Manager Atrium C&I Co., Ltd. Tel: 82-2-2122-3111 Fax: 82-2-761-3541 Mobile: 82-18-222-2244 Mail : skyblue@atriumcni.com skyblue@prumail.co.kr ------------------------------- Tag: NVIDIA display driver problem Tag: 43081
  - 11
    - usb printer Hi,all Now I want to add a usb printer on a target device which runs wince.net 4.1.What should I do?How to configure the ".reg" file and add what features? When I print some text in wordpad,it displays a dialog box"hp laserjet 1000 is overtime on LPT1". Thank you for your help Tag: NVIDIA display driver problem Tag: 43080
  - 12
    - How to replace the default background Image with onother bmp file Hey experts, I am new in working with Platform Builder and I am facing a lot if difficulties. I am using Platform Builder 4.1. I don't know how to replace the default background image with onother bmp file. In which directory I have to put the bmp file with which I want to replace the default wallpaper. I assume that it should be in the directory where the current wallpaper is. But I don't know where this directory is (or may be I am wrong). What exactly I have to write in the registry file? Is it something like: HKEY_LOCAL_MACHINE\ControlPanel\desktop "Wallpaper" = "\$(_WINCEROOT)\Samples\deskpicture.bmp" I will really appreciate if you help me. Thank you in advance. Petko Tag: NVIDIA display driver problem Tag: 43067
  - 13
    - pci RESUMING I can see my PCI is asserting the IRQ line, but how come the OS is not wakened up? I have called KernelIoControl(IOCTL_HAL_ENABLE_WAKE, &m_dwSysIntr, sizeof(m_dwSysIntr), NULL, 0, NULL); to associate my interrupt with the system wakeup sources. Any particuliar requirement on the PCI device, I am using a PLX as the bridge. any particuliar wrong? Ying/ "Ten" <nick.bartolotti@tentechnologies.com> wrote in message news:KJwjb.33095$Hs.30478@twister.nyroc.rr.com... > Are you using GIIS? Perhaps the first PCI device is handled through GIIS > and yours is not. > > Did you write a device driver for your PCI card? If so, then you should > have written an ISR and IST to handle all the interrupts. This routine > should be notified of any activity on the IRQ lines for your device. > > Once the IRQ is detected, you should be able to wake up the OS. I'm not > sure if you need to register your device driver with the OS so the OS > recognizes it as a source for a resume instruction. > > Search for RequestPowerNotifications and SetSystemPowerState for information > on how to wake up the system from your driver. > > Nick. > > > > "Patrick Zou" <patrick_zou_nospam@hotmail.com> wrote in message > news:ON1agf3kDHA.1800@TK2MSFTNGP10.phx.gbl... > > In a CEPC enviroment, a PCI device could resume the system. I guess the > > resuming source is the interrupt line. If there is any signalling on the > > interrupt line, system could resume. ( I guess this is correct, I have > > suspected it could something related to the Isrinfo structure, there are 2 > > fiedls called checkmask, and checkport, I commented this out, the resuming > > still works. That means, the only source is the interrupt line). > > > > OK, I have another PCI device, which is designed by us, there are some > > activities on ther interrupt line, but however, system dosn't resume? so > Is > > there any requirement on the resuming signalling? like the interrupt has > to > > be long enought for X ms? > > > > thanks > > Ying/ > > > > > > Tag: NVIDIA display driver problem Tag: 43066
  - 14
    - Expectation about a BSP and question about eboot Hi, I have a few problems I have been working on lately and would like some inputs on these matters. First what's to be expected when a board supplier provides you with a BSP. What I mean is if I choose to build a new platform based on that bsp and choose a standard setup, compile it. Should I expect it to boot without modifying anything ? So far I have had errors from ethernet drivers and PCI bus. Second, I have tried with every boot.bin found on my system to get the startup to connect to PB. And i always get either unsupported ethernet card or Self test failed message. I have been told by the supplier that the card is working ok. Could I have missed something here. Thank to all repplies Tag: NVIDIA display driver problem Tag: 43059
  - 15
    - CE Build Process Hi, Just trying to get a better understand of what happens when I hit "rebuild platform" from the PB4.1 IDE. What is executed first (is it wince.bat??) when I hit rebuild platform. I did read the two excellent articals in the "Get Embedded" column "Windows CE: Inside the build system" and "Customizing the windows ce build system", but wanted a little more detail. Guess I'm hoppin to find the starting point and then can trace through the build process. Thanks again, Willie Tag: NVIDIA display driver problem Tag: 43058
  - 16
    - registry icons Are there any redistributable registry (rubik's cube) icons anywhere in CE ? I haven't found any in any of the public res files, but it would be nice to use a well-known and established icon on CE. Tag: NVIDIA display driver problem Tag: 43056
  - 17
    - ethernet download problem Hi ALL, I am new to Windows CE and currently working on ethernet dowload. During the download i keep getting the errors on my hyperterminal "TFTP: Desktop losing ACK, block number = 1","TFTP: Desktop losing ACK, block number = 2" and so on. I am not very familiar with TFTP protocol so can somebody tell me what could be the probable cause. Thanks Ashish Tag: NVIDIA display driver problem Tag: 43055
  - 18
    - auto starting Remote Display application Hi, everyone, I have a CE .NET device without any keyboard/mouse input. I can use the Remote Display Control to connect to this device. But I have problem starting the cerdisp program on the target since I will not have KITL in a ship product. I tried starting cerdisp at windows startup but it failed because cerdisp starts too early. Neither activesync or the CF ethernet connection has been initialized at that moment. So 1) Is the Remote Display Control capable of sitting as a server and wait for connection? 2) Is there an easy way to start a progam with some delay like 5 seconds? Thank you. Derek Tag: NVIDIA display driver problem Tag: 43044
  - 19
    - About CE Interrupt Machine! Dear Sirs, I read the word about CE's Interrupt is that,first find the entry,then setevent,wait for dispatch to finish truely process,like Linux. but I'm not study Linux,so please talk about de Interrupt machine! Thanks, Tag: NVIDIA display driver problem Tag: 43042
  - 20
    - How to assign CE's Priority? Dear Sirs, why pHashThread[PRIORITY_LEVEL_HASHSIZE]£¬PRIORITY_LEVEL_HASHSIZE£½32,set the thread priority from 255 to 248 can only allocate to pHashThread[31],but how to thread of THREAD_PRIORIY_TIME_CRITICAL and THREAD_PRIORITY_IDLE shared cpu? i think the priority of 255~248 is corresponding to THREAD_PRIORITY_TIME_CRITICAL~THREAD_PRIORITY_IDLE,is right? Thanks, Tag: NVIDIA display driver problem Tag: 43040
  - 21
    - Error spawning cebuild.bat Hi. A can't build any of my (working) paltforms. Always i get: --------------------Configuration: C3E_733 - CEPC: X86 Win32 (WCE x86) Release-------------------- Generating platform header files... VcSpawn: could not find 'cebuild.bat' Error PB2504: Error spawning cebuild.bat C3E_733 - 1 error(s), 0 warning(s) Andybody an idea? Best regards A. Gubelmann Tag: NVIDIA display driver problem Tag: 43036
  - 22
    - Error PB2502 --------------------Configuration: IQUUMDEV - IQuumDev Win32 (WCE ARMV4I) Release-------------------- Platform header files are up-to-date... Performing Additional Build Actions... --------------------Configuration: LIAT - LIAT WIN32 (WCE ARMV4I) RELEASE-------------------- Error PB2502: The feature does not support this configuration. The feature cannot be built I google search on this, but I didn't see any answers. Have any figure this out why it happen? I created a project(a dll) to a ARM4I based platform. The compile is create with no error, but when I do a "build selected feature", and this error comes out. I think something got corrupt/changed. I remember it was working fine with "build platform". then I saw that problem with "using old style fixup...", so I try to fix that with /savebaserelocations:... a few times(typo,etc..), due suddenly I saw that PB2502 error, and I wasn't able to fix it no matter what I do. I try. deleting all the regenerable files, rebuilt platform(clean, not clean), create another project, nothing works. check the project setting also. But if I create new platform(pda, same as previous one) and add/insert the project into this platform with/without the /savebaserelocations fix. Everything is fine. Anyone know how to fix that. Tag: NVIDIA display driver problem Tag: 43033
  - 23
    - WMA playback via RenderFile Our platform is x86 based processor on CE.NET 4.2. RenderFile from a FilterGraph interface on WMA files does not appear to be working. Note: - WMA and MP3 playback work via the Media Player component from Platform builder - MP3 playback works via 'RenderFile' inside custom application. - WMA playback does NOT work via 'RenderFile' inside custom application. The error code returned is unidentifiable at something like 0xc00d0026. Since the media player can play it, I assume this means the correct components have been added in platform builder. On DX9 you have to add a WM9 'AsfReader' filter to the graph and render each pin seperately for WMA files. This component appear to be a WM9 component and is not available on CE. Any ideas ? Thanks, Jason Tag: NVIDIA display driver problem Tag: 43032
  - 24
    - Rolling an SDK which includes the .NET Compact Framework Has anyone encountered the following bug in rolling an SDK from PB4.1? When you specify an emulator skin, the rolled SDK includes a registry setting which points to this skin. Unfortunately, the value points to a directory. Visual Studio .NET 2003 expects the value to point to the skin XML file. Therefore, when you try to run a .NET CF app from VS.NET, it gives an error, "XML skin is not valid." VS.NET Tools for Windows CE contains a manual fix for the problem. But I would like to fix it in the SDK msi itself. Any suggestions? Also, is there any way of specifying the dimentions of a default form in Visual Studio while building an SDK? The Pocket PC SDK does this. Regards Anil Tag: NVIDIA display driver problem Tag: 43028
  - 25
    - Firewall problem Hi all. I am a CE 4.2 Platform that includes a firewall. I am able to perform successful incoming/outgoing TCP transfers. However, I am unable to perform the WinInet functions that handle FTP transfers [InternetConnect(), FtpPutFile()]. I relealize that the cause for that is that the firewall's ftp protocol handler tries to access payload of packet which is not in contiguous buffer and that the firewall doesn't handle flattening non-contiguous buffers and that the result will be that the ftp handler will not process this packet. My question is how can I still use both a firewall and the WinInet FTP routines? Thanks Offir. Tag: NVIDIA display driver problem Tag: 43024
- Next
  - 1
    - problem about cepcboot.144 which is copied to floppy!!!! Hello everybody, I copy cepcboot.144 to floppy disk. Because of running from floppy disk too slowly and not connecting to my working pc through ethernet, I decicded to copy the contents of this floppy disk to my Cepc hard disk. However, Cepc pc doesn't started from this hard disk. "Wrong system disk" error is dissappered in screen. What is the reason of this? how can I boot from hard disk? best regards sezin Tag: NVIDIA display driver problem Tag: 43022
  - 2
    - Course Recommendation? I am new to Windows CE.NET 4.2 and I am looking for a course to teach me every aspect of building embedded systems using this software. Could anybody recommend a very good course which will cover Windows CE.NET 4.2 in great detail including how to get applications that usually run on Windows 2000 to run on Windows CE.NET? I am based in London, U.K. Thanks Tag: NVIDIA display driver problem Tag: 43019
  - 3
    - PS2 keyboard driver issue at WINCE4.2 Dear all: I used the Geode X86 platform to port wince 4.2 drivers. There are two issues about PS2 keyboard driver. 1. PS/2 keyboard driver will auto-repeating continue the key action and can¡¦t be stopped. When we boot up the device, and press one key of the PS2 keyboard, it will auto-repeating continue the key action. 2. PS/2 keyboard driver retrieve the wrong scan code after suspend/resume. When we boot up the device, and press one key of the PS2 keyboard. After going to suspend/resume and then press the same key of the PS2 keyboard and retireve the scan code. The latter scan code is not the same with the former scan code, it retrieved the wrong scan code. If you have any idea,please advised me. Thanks. best regards, Brian Tag: NVIDIA display driver problem Tag: 43017
  - 4
    - Once more Mousecursor on Touchdevices Hi, i read all the messages with mousecursor problems on different PB Versions. Last year I made a PB3.0 WinCE Image without the mousecursor for our Touchbased device. Because all those BSP_NOCURSOR ... variables don't worked I ended up changing the cesysgen.bat deleting all mcursor mcursor8 components. The mouse does not appear anymore and I was very astonished to see something like a WAIT-CURSOR when system was busy. That was just what I want! Fine! Now I'm developing against a PB4.1 Terminal Client Image. I thought that MS has done something to allow a Mousecursor when a Mouse is detected and hide it when no Mouse is present. But its the same disappointment then before. (maybe its better in 4.2, my next odyssey). So I oncemore made the changes in cesysgen.bat like this: SYSGEN_TOUCH is set. set GWE3_COMPONENTS=%GWE3_COMPONENTS% iconcmn icon iconcurs set GWE3_COMPONENTS=%GWE3_COMPONENTS% TouchCursorOnly cursor cursor8 Ok, mouse is not present anymore but where is this fine WAIT-CURSOR I saw in PB3.0. Has anyone any experience with this? Tag: NVIDIA display driver problem Tag: 43016
  - 5
    - About PCMCIA I had a Card Reader Chip is TI1225 and used the TI1250 Driver for CE.NET4.1 in CEPC. The TI1250 Driver for Card Reader is OK. When I put the PCMCIA card into Card Reader, it fail for the PCMCIA card. The debug message is follow. 169302 PID:277bb21a TID:475d92d2 0x875c8800: >>> Loading module prismnds.dll at address 0x01E00000-0x01EA6000 171698 PID:277bb21a TID:475d92d2 0x875c8800: DEVICE!ActivateDeviceEx(Drivers\PCMCIA\UNKNOWN_MANUFACTURER-0000) entered 171699 PID:277bb21a TID:475d92d2 ==>NdisInitializeWrapper 171699 PID:277bb21a TID:475d92d2 <==NdisInitializeWrapper 171700 PID:277bb21a TID:475d92d2 ==>NdisMRegisterMiniport: NdisWrapperHandle 0005CDF0 171700 PID:277bb21a TID:475d92d2 ==>ndisRegisterMiniportDriver: NdisWrapperHandle 0005CDF0 171700 PID:277bb21a TID:475d92d2 <==ndisRegisterMiniportDriver: MiniBlock 00030560 171700 PID:277bb21a TID:475d92d2 NdisMRegisterMiniport: MiniBlock 00030560 171700 PID:277bb21a TID:475d92d2 <==NdisMRegisterMiniport: MiniBlock 00030560, Status 0 171700 PID:277bb21a TID:475d92d2 171701 PID:277bb21a TID:475d92d2 ndisMInitializeAdapter: Miniport 0030E4B4, 171702 PID:277bb21a TID:475d92d2 ==>ndisQueueMiniportOnDriver: Miniport 0030E4B4, MiniBlock 00030560 171702 PID:277bb21a TID:475d92d2 <==ndisQueueMiniportOnDriver: Miniport 0030E4B4, MiniBlock 00030560, rc 1 171704 PID:277bb21a TID:475d92d2 ==>NdisMSetAttributesEx: Miniport 0030E4B4 171704 PID:277bb21a TID:475d92d2 0x875c8800: NDIS: ERROR-CardGetParsedTuple failed 31 171704 PID:277bb21a TID:475d92d2 0x875c8800: NDIS: ERROR-INdisGetPcmciaWindow failed 0xc000009a 171704 PID:277bb21a TID:475d92d2 ==>NdisMDeregisterAdapterShutdownHandler: Miniport 0030E4B4 171704 PID:277bb21a TID:475d92d2 <==NdisMDeregisterAdapterShutdownHandler: Miniport 0030E4B4 171704 PID:277bb21a TID:475d92d2 ***NDIS*** (b, 2064) 171704 PID:277bb21a TID:475d92d2 INIT FAILURE: Dequeueing the miniport from the driver block. 171705 PID:277bb21a TID:475d92d2 ==>ndisDeQueueMiniportOnDriver, Miniport 0030E4B4, MiniBlock 00030560 171705 PID:277bb21a TID:475d92d2 <==ndisDeQueueMiniportOnDriver: Miniport 0030E4B4, MiniBlock 00030560 171705 PID:277bb21a TID:475d92d2 ***NDIS*** (b, 2091) 171705 PID:277bb21a TID:475d92d2 INIT FAILURE: Dereferencing the miniport block. 171705 PID:277bb21a TID:475d92d2 ndisDereferenceMiniport:Miniport 0030E4B4, Ref = 0 171705 PID:277bb21a TID:475d92d2 ==>ndisMUnload: DriverObject 0005CD60 171706 PID:277bb21a TID:475d92d2 ndisMUnload: MiniBlock 00030560 171706 PID:277bb21a TID:475d92d2 <==ndisMUnload: DriverObject 0005CD60, MiniBlock 00030560 Unloaded symbols for 'D:\JOSDAR\VIA\RELDIR\VIACEPC_CLE266_BASED_X86DEBUG\PRISMNDS.DLL' 171713 PID:277bb21a TID:475d92d2 0x875c8800: <<< Unloading module prismnds.dll at address 0x01E00000-0x01EA6000 Does anyone knows what is error? I also find my PCMCIA card can't plug in. I need the help. Best Regard. Tag: NVIDIA display driver problem Tag: 43014
  - 6
    - ARM-based Loading Testing Tool (WinCE.NET 4.2) Dear Sirs, Do anyone know how to check the CPU loading for ARM-based platform (Ex: XScale CPU)? I want to check my driver loading under ARM-based CPU. Thanks, JLL Tag: NVIDIA display driver problem Tag: 43011
  - 7
    - ARM-based Loading Testing Tool (WinCE.NET 4.2) Dear Sirs, Do anyone know how to check the CPU loading for ARM-based platform (Ex: XScale CPU)? I want to check my driver loading under ARM-based CPU. Thanks, JLL Tag: NVIDIA display driver problem Tag: 43010
  - 8
    - ARM-based Loading Tool Under WinCE.NET 4.2 Dear Sirs, Do anyone know how to check CPU loading on Windows CE 4.2 Image? Does it have an API to bundle this value into my test program? Thanks, JLL Tag: NVIDIA display driver problem Tag: 43009
  - 9
    - What's the purpuse of Miscellaneous Write Register in lubbock baseboard provided by intel? I found "MISC_WR_OFFSET" string in two functions, which is OEMPowerOff and PmgrResume in pmgrxsc1.s file. OEMPowerOff function store the value of Miscellaneous Write Register. PmgrResume function restore the value of Miscellaneous Write Register. My question is: Where the value of Miscellaneous Write Register is set or changed? Tag: NVIDIA display driver problem Tag: 43008
  - 10
    - how do CE identify card detect is passed to system? my xscale board based on lobbock pxa 263's CF slot work fine with eboot and KITL, but CE don't show anything up when i insert a memory card or modem card. I want to know where and how do ce system check card detect? thanks in advance -- -------------------------------- kccheng www.kachun.com Tag: NVIDIA display driver problem Tag: 43006
  - 11
    - custom USB device driver usage in application Hi, I have been developing a custom USB class driver. So, I don't want to use stream interface or other windows CE API to access my device. My device driver is loaded by USBD when I connect my device to windows CE 3.0. Now the question: How can I get these functions (provided by usbd and my class driver) for my application so that I can normally call them from my application? -mikko Tag: NVIDIA display driver problem Tag: 43005
  - 12
    - How to identify CF storage card name with logical volume ( such as card created using ramdisk ) Hi All, How to get the volume name ( folder name ) of CF card once get inserted? How to distinguish the volume name between CF card with logical card created using RAMDISK. Have anyone successfully got notification of SHCNE_MEDIAINSERTED? Plesae help me. Thanks, GP. Tag: NVIDIA display driver problem Tag: 43003
  - 13
    - USB host problem!!!! My platform is SMDK2410.CPU supports 2-port USB host interface,and USB controller complies with OHCI rev 1.0.I want to use 2 SB host.At current ,the first USB port works well but the second don't work.As far as I know, the OHCI driver is similar to other cpu's BSP(e.g:SA11x0) for WinCE.Only interrupt and membase is different.Right?Must I set up another interrupt number for the second USB port? Thanks all the help in advance! Power.P Tag: NVIDIA display driver problem Tag: 43002
  - 14
    - IButton Windows CE How to do install ibutton Windows CE for use my application ? I didnt find driver Ibutton for Windows CE. Ibutton connected via Rs232 to Windows CE intalled Device. But i coudnt read Ibutton Id from Rs232. Tag: NVIDIA display driver problem Tag: 42999
  - 15
    - TUX RWTEST test 2003 failure issue I've seen posts to this group before talking about the TUX RWTEST failing on test 2003 for no apparent reason (all other tests succeed). There was some statements made about possible bugs in the FAL and the necessity to have sectors be 512 bytes and a multiple of 256 sectors per block. However, I never saw any conclusive resolution to this. I'm seeing the exact same issue on the system I'm working on right now. Is this a bug in RWTEST (it really appears to be reading data before its written) or is it a FAL issue? What is the resolution? Thanks, Mark Moeller Qualnetics Corporation Tag: NVIDIA display driver problem Tag: 42993
  - 16
    - [CETK] ndis 2 card test on 2 target -- Harishr help me Dear All Could anybody describe more detail about this test Everytime I run this time, it just tell me 63c591fa: ndt_2c ERROR: NDTStartup for 'CISCO1@192.168.230.222' failed with hr=0x8007274d 63c591fa: ndt_2c ERROR: NDTBindProtocol for 'CISCO1@192.168.230.222' failed with hr=0x80072736 "ndt_2c" returned SPR_FAIL while handling the SPM_SHELL_INFO message. This DLL has been unloaded as requested. The CETK help has only little information about this I still have no idea how to setup the environment BR. Phoebus Yang Tag: NVIDIA display driver problem Tag: 42990
  - 17
    - How to deploy a MFC/ActiveX control app to platform? Dear all, Now, we encountered a problem about adding applications to OS platform. Our applications are developed by EVC++ 4.0 ; their projects are MFC application and MFC ActiveX Control in EVC++ 4.0. But project wizard in Platform Builder can not find any project about MFC application and MFC ActiveX Control . Could you tell us how to add MFC application and MFC ActiveX Control to OS platform? Thanks! PS: We're using WinCE.NET 4.2 and Platform configuration is Mobile-Handheld for project development ; our SDB is Intel DBPXA255. Kemin Tag: NVIDIA display driver problem Tag: 42989
  - 18
    - How to add the cdrom into the system,include Hive-Based Registry When I add the Hive-Based Registry,the cdrom will dismiss in the system.And I disable the Hive-Based Registry,the cdrom will turn to OK.So I ask for help.thanks. Tag: NVIDIA display driver problem Tag: 42988
  - 19
    - Image download NB0 hi, as far as i know we can download nk.bin file using PB , can anyone help to tell me how can we manage to download nk.nb0 file using PB , if we can't what are the other possibilities. thanx Umesh Tag: NVIDIA display driver problem Tag: 42987
  - 20
    - CEPC, PCI device resuming, In a CEPC enviroment, a PCI device could resume the system. I guess the resuming source is the interrupt line. If there is any signalling on the interrupt line, system could resume. ( I guess this is correct, I have suspected it could something related to the Isrinfo structure, there are 2 fiedls called checkmask, and checkport, I commented this out, the resuming still works. That means, the only source is the interrupt line). OK, I have another PCI device, which is designed by us, there are some activities on ther interrupt line, but however, system dosn't resume? so Is there any requirement on the resuming signalling? like the interrupt has to be long enought for X ms? thanks Ying/ Tag: NVIDIA display driver problem Tag: 42983
  - 21
    - Suspend Timeout Problem I'm having a problem with the battery and AC power-off timeouts in Windows CE 4.2. I'm using PMSTUBS, so only the GWES registry values exist. By default, they are set like this: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power] "BattPowerOff"=dword:180 "ExtPowerOff"=dword:0 "WakeupPowerOff"=dword:0 "ScreenPowerOff"=dword:0 With these settings, the system never shuts itself down. If BattPowerOff is set to 0 and ExtPowerOff is set to 60, the system shuts down after one minute, whether it's operating on AC power or not. The battery driver is reporting the correct value in the ACLineStatus field. I've tried all kinds of permutations with these registry values, to no avail. Any ideas? Tag: NVIDIA display driver problem Tag: 42980
  - 22
    - ActiveSync sends only one CLIENT message ActiveSync was working fine on my platform until a couple weeks ago. I cannot figure out what changed. The device now only sends out one "CLIENT" before timing out, and popping up the Error 678 dialog. It used to transmit "CLIENT" 4-5 times before giving up. Everything else seems to be the same. Any ideas what could have changed? I diff'ed the registries of a working and non-working system, and they were the same as far as I can tell. Tag: NVIDIA display driver problem Tag: 42975
  - 23
    - CSR Bluetooth module This is a multi-part message in MIME format. ------=_NextPart_000_0035_01C3934F.273CC7A0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi all, We should integrate a CSR BlueCore chip on a dedicated platform. We have = not decided for now if it will be driven by serial or USB. For serial, we aim to use the BCSP HCI transport included in PB4.2. For = USB, the BTUSB HCI transport. Could we use these modules out-of-the-box or is there any adaptation to = perform ? What are the potential known issues or tricky point in = integrating these modules ? Thanks for your answer Yannick --=20 ---------------------------------------------------------------- Yannick Chamming's ADESET Windows Embedded Manager ychammings_AT_adeset_DOT_com> http://www.adeset.com T=E9l : +33 (0)4.72.18.57.77 Fax : +33 (0)4.72.18.57.78 ---------------------------------------------------------------- ------=_NextPart_000_0035_01C3934F.273CC7A0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.2800.1106" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff> <DIV><FONT face=3DArial size=3D2>Hi all,</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>We should integrate a CSR BlueCore chip = on a=20 dedicated platform. We have not decided for now if it will be driven by = serial=20 or USB.</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>For serial, we aim to use the BCSP HCI = transport=20 included in PB4.2. For USB, the BTUSB HCI transport.</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>Could we use these modules = out-of-the-box or is=20 there any adaptation to perform ? What are the potential known issues or = tricky=20 point in integrating these modules ?</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>Thanks for your answer</FONT></DIV> <DIV><FONT face=3DArial size=3D2>Yannick</FONT></DIV> <DIV><FONT face=3DArial size=3D2><BR>--=20 <BR>----------------------------------------------------------------<BR>Y= annick=20 Chamming's<BR>ADESET<BR>Windows Embedded=20 Manager<BR>ychammings_AT_adeset_DOT_com><BR><A=20 href=3D"http://www.adeset.com">http://www.adeset.com</A><BR>T=E9l  = : +33=20 (0)4.72.18.57.77<BR>Fax : +33=20 (0)4.72.18.57.78<BR>-----------------------------------------------------= -----------<BR></FONT></DIV></BODY></HTML> ------=_NextPart_000_0035_01C3934F.273CC7A0-- Tag: NVIDIA display driver problem Tag: 42960
  - 24
    - RE: control application via web Hi thanks for the response, what i basically want to do is change variables in my application running on the device via a web page. Would the webservice be useful to me in doing this ? if so how? thanks in Advance. Feroz You can also do it with ASP and COM components to control your system. You also have the option of creating a webservice using the web server to expose APIs to remotely control/query the device. It's really up to you on what your device needs are. -- Steve Maillet (eMVP) Entelechy Consulting smaillet_AT_EntelechyConsulting_DOT_com You'll need to use some kind of ISAPI extensions to the server which, when referenced from the pages which you are serving call your local equipment control APIs. Paul T. "Feroz Bhaiji" <feroz.bhaiji@nospam.co.uk> wrote in message news:eVXveCakDHA.2140@TK2MSFTNGP09.phx.gbl... > Hi, > > My device basically controls a machine and is connected to the ethernet. Now > i want to create a web page to control the machine. > I have installed the web server and associated components which enables me > to host a web page on my device but how do i control it via the web. I have > seen a lot of equipment that can be controlled via the web, so it can be > done, i just don't know how? > > Anyone have any hints? > > regards > > feroz Tag: NVIDIA display driver problem Tag: 42956
  - 25
    - Re: control device via internet Hi thanks for the response, what i basically want to do is change variables in my application running on the device via a web page. Would the webservice be useful to me in doing this ? if so how? thanks in Advance. Feroz You can also do it with ASP and COM components to control your system. You also have the option of creating a webservice using the web server to expose APIs to remotely control/query the device. It's really up to you on what your device needs are. -- Steve Maillet (eMVP) Entelechy Consulting smaillet_AT_EntelechyConsulting_DOT_com You'll need to use some kind of ISAPI extensions to the server which, when referenced from the pages which you are serving call your local equipment control APIs. Paul T. "Feroz Bhaiji" <feroz.bhaiji@nospam.co.uk> wrote in message news:eVXveCakDHA.2140@TK2MSFTNGP09.phx.gbl... > Hi, > > My device basically controls a machine and is connected to the ethernet. Now > i want to create a web page to control the machine. > I have installed the web server and associated components which enables me > to host a web page on my device but how do i control it via the web. I have > seen a lot of equipment that can be controlled via the web, so it can be > done, i just don't know how? > > Anyone have any hints? > > regards > > feroz Tag: NVIDIA display driver problem Tag: 42955

Hello,

I setup a CEPC. NVIDIA display driver is used in this CEPC. Becouse of
not located NVIDIA driver in Windows CE .NET, the resolution in CEPC is
really bad.

My question is how to install NVIDIA driver to my CEPC?

Thanks a lot for your help!

best regards

sezin

RE: NVIDIA display driver problem by LouisCl

LouisCl
Fri Oct 17 12:47:36 CDT 2003

When using a display device that has no associated driver in CE, the
default vgaflat driver is used. This driver relies on the /L parameter to
loadcepc to set the resolution. In some cases, if the resolution/bit depth
specified in the /L parameter isn't available, the CEPC will start up in
320x240 resolution. This happens because the loadcepc program only knows
about VESA resolutions, and some cards don't support many resolution/bit
depth combinations as VESA modes.

The fix for this is to modify your CEPC boot disk to use a different
resolution/bit depth.

See
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/wcedsn40/ht
ml/cgtskchoosingresolutionbasedonvideocardincepc.asp

and
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/wcepb40/htm
l/_wcepb_load_cepc_tool.asp

for more information on loadcepc and its parameters.

As far as I know, there are no nVidia-specific display drivers for CE.

Louis Clausen
Test Developer - Windows CE Multimedia

This posting is provided "AS IS" with no warranties, and confers no rights

--------------------
| Subject: NVIDIA display driver problem
| From: pera323@yahoo.com (sezin)
| Sender: pera323@yahoo.com (sezin)
| Content-Type: text/plain; charset=ISO-8859-1
| Content-Transfer-Encoding: 8bit
| User-Agent: NewsPortal 0.23
| X-HTTP-Posting-Host: scirocco.eutelsat.net
| Organization: http://www.cewindows.net/newsportal/
| Message-ID: <eECOIhLlDHA.3700@TK2MSFTNGP11.phx.gbl>
| Newsgroups: microsoft.public.windowsce.platbuilder
| Date: Fri, 17 Oct 2003 07:09:28 -0700
| NNTP-Posting-Host: 64.246.18.3
| Lines: 1
| Path: cpmsftngxa06.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGP11.phx.gbl
| Xref: cpmsftngxa06.phx.gbl microsoft.public.windowsce.platbuilder:40732
| X-Tomcat-NG: microsoft.public.windowsce.platbuilder
|
|
|
| Hello,
|
| I setup a CEPC. NVIDIA display driver is used in this CEPC. Becouse of
| not located NVIDIA driver in Windows CE .NET, the resolution in CEPC is
| really bad.
|
| My question is how to install NVIDIA driver to my CEPC?
|
|
| Thanks a lot for your help!
|
| best regards
|
| sezin
|
|