Multiple Monitor support in CE 6.0

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Battery Indicator not update on today screen Hi, i am including battery driver in the platform of WM5, but the battery indicator on the today screen not get updated, any idea? Best regards, James -- Message posted via PocketPCJunkies.com http://www.pocketpcjunkies.com/Uwe/Forums.aspx/wince-pb/200804/1 Tag: Multiple Monitor support in CE 6.0 Tag: 111857
  - 2
    - WinCE 6.0 remote tools issue..... hi! I am working on pxa270 WinCE 6.0 amd i am loading the image through platform builder 6.0 (VS2005) through ethernet. My remote tools were not working so after going through several posts i came to know that we need to copy the files. D:\Program Files\Common Files\Microsoft Shared\Windows CE Tools\Platman \target\wce600\armV4i\ cemgr.exe,cetlkitl.dll,cetlstub.dll,tcpipc.dll.tlcvsrv.dll to release directory.. Then my remote tools started working. My problem comes here.. I am running CETK through platform builder. When i test the connection using device properties in CETK, it says connection established... when i try to connect then it is returning... "Platform Manager unable to run the application" I tried running clientside manually by giving.. Clientside /n=computername /p=5555 Then it is returning "unable to resolve the servername" I am i missing anything can any one suggest me regarding this.. Thanks. Tag: Multiple Monitor support in CE 6.0 Tag: 111854
  - 3
    - GDI Interface test - GPE testing Hi All, I am working on porting my GPE enabled display driver from WinCE 5.0 to WinCE 6.0. I like to know is there any changes applicable to GPE part of my display driver for this migration? I successfully compiled the GPE enabled display driver for CE 6.0. Now to test this I am running the GDI Interface test of WCETK on CEPC with CE 6.0. But while running this test I am getting following capabiltiy bits enabled for my device Capability RASTERCAPS = 75777 RC_BITBLT RC_ROTATEBLT RC_STRETCHBLT RC_STRETCHDIB Currently the test is failing and I doubt because I am getting this extra bit (RC_ROTATEBLT) bit enabled. I want to disable this. Can anyone explain me what this bits are and from where they come and how can i enable or disable particular bit? Here I am having doubt on RC_ROTATEBLT. How I can disable this? I am not getting any info on this on net or MSDN. All the capability bits are listed in MSDN under GDIINFO struct but not RC_ROTATEBLT. Why is it so? Thanks, Vikas Tag: Multiple Monitor support in CE 6.0 Tag: 111853
  - 4
    - private directory building... I have modified a source code of C:\WINCE500\PRIVATE\WINCEOS\COREOS\NK\KERNEL\ARM\mdarm.c In order to apply the modified source code to my os design, I should run build and sysgen. But it would take so much time. So I want to use some other way to build in more short time. I thought it would be work if I run 'build and sysgen current project' for the kernel directory and buildrel and makeimg. But it doesn't work. Besides running the 'build and sysgen', is there any way to apply the modified kernel source by short time? Tag: Multiple Monitor support in CE 6.0 Tag: 111844
  - 5
    - how can I register my driver under gwes? HI? If I wanna run some driver under device manager, I need to register it to HKLM/drivers/builtin entry. But if I have to register some native mode driver under gwes, what should I do for it? Tag: Multiple Monitor support in CE 6.0 Tag: 111841
  - 6
    - USB Speed Issue For OS Download Hi, We are using Windows CE 6.0. I am able to download nk.bin with USB Serial at Full Speed and the target boots. Our USB Controller can operate at High Speed. To Operate at High Speed I have changed bcdUSB value in Device Descriptor to 0x0200 in serial_dl.cpp and USB Controller is configured to operate at High Speed. When we switch to High Speed operation it gives following error message in Platform Builder (CoreCon) Error: Failed to download image. Please check connection settings. COM Port log is as below Log1: ------- Sending Boot Request... Waiting for boot ack... Received boot request ack... starting download BL_IMAGE_TYPE_BIN Download file information: ----------------------------------------------------------- [0]: Address=0x84001000 Length=0x00a122e4 Save=0x80001000 ----------------------------------------------------------- data checksum failure. expected 0x000000F6, received 0x000000C8 received non-download packet type 0x000000AA received non-download packet type 0x000000AA received non-download packet type 0x000000AA received non-download packet type 0x000000AA received non-download packet type 0x000000AA Log2: ------- Sending Boot Request... Waiting for boot ack... Received boot request ack... starting download BL_IMAGE_TYPE_BIN Download file information: ----------------------------------------------------------- [0]: Address=0x84001000 Length=0x00a122e4 Save=0x80001000 ----------------------------------------------------------- In Log1, it fails due to bad crc and for Log2 it just blocks after printing Download File Information. Is it not possible to Opearte USB at High Speed in Bootloader, because as it is implemented in Polling mode ? For any one USB worked at High Speed in Bootloader ? Please help on this issue. Thank You & Regards, Sudheer Tag: Multiple Monitor support in CE 6.0 Tag: 111832
  - 7
    - SetEvent by driver in WinCE6 Hi all, I'm trying to get a driver to notify an application of the occurrence of a certain condition by doing SetEvent on a handle provided by the application via a DeviceIoControl call. However, the SetEvent fails with error code ERROR_INVALID_HANDLE. I guess it has something to do with manipulating user space pointers in kernel space but what is the correct way around this? Any ideas are much appreciated. Thanks, Rickard Tag: Multiple Monitor support in CE 6.0 Tag: 111828
  - 8
    - if camera driver support 800*600 resolution on wince600? Hi, I have a question about camera driver on wince600. I used the camera driver to support my camera device,and ran the cetk.It can pass all resolutions which less than or equal to the resolution of VGA(640*480).but it cannot pass cetk test when resolution is 800*600*16(bits). But the application can ran on SVGA.Why it fail in cetk?? The fail message is "Starting the capture graph failed.".It looks like the directshow cannot support this bigger resolution??It is ?? Thanks very much! Liz Tag: Multiple Monitor support in CE 6.0 Tag: 111827
  - 9
    - Problem with virtual COM Port over bluetooth Hi, I have develop my own server & client over bluetooth using normal virtual com port for windows mobile 6.0 device .There is a server already running one the device and client on other device, Now,i need to transfer data from client to server. step at server end as follow: 1: Register Device with PORTEMUPortParams pp; pp.channel = RFCOMM_CHANNEL_MULTIPLE; pp.flocal = TRUE; pp.uiportflags = 0; 2: after that,Open port using CreateFile. 3. used DeviceIoControl with IOCTL_BLUETOOTH_GET_RFCOMM_CHANNEL. 4.after that register service on server with particular GUID. 5.ConfigurePort with value BaudRate=CBR_9600, ByteSize = 8,, fParity = true , Parity = , EVENPARITY ; StopBits = ONESTOPBIT; 6.SetCommunicationTimeouts with value ReadIntervalTimeout = MAXWORD, ReadTotalTimeoutMultiplier =0, ReadTotalTimeoutConstant=0, WriteTotalTimeoutMultiplier=10, WriteTotalTimeoutConstant =1000; 7:at create one thread for reading data.. ReadFile(hDevOpen,szBuffer, 999, &dwBytesRead, NULL); Step at Client is follow: 1: Register Device with PORTEMUPortParams pp; pp.channel = 0; pp.flocal = FALSE; pp.device = btaddr;; pp.uuidService = GUID; pp.uiportflags = 0; 2: after that,Open port using CreateFile. 3. used DeviceIoControl with IOCTL_BLUETOOTH_GET_PEER_DEVICE. 4.ConfigurePort with value BaudRate=CBR_9600, ByteSize = 8,, fParity = true , Parity = , EVENPARITY ; StopBits = ONESTOPBIT; 5.SetCommunicationTimeouts with value ReadIntervalTimeout = MAXWORD, ReadTotalTimeoutMultiplier =0, ReadTotalTimeoutConstant=0, WriteTotalTimeoutMultiplier=10, WriteTotalTimeoutConstant =1000; 7:at create one thread for writing data.. WriteFile(hDevOpen, &cBuffer, dwSize, &dwWritten, NULL); Now the problem is that, i got succes for WriteFile at client with dwSize & dwWritten is same. But at Server end i got succes for ReadFile with any value means dwBytesRead is equal to zero and no data in szBuffer. What am i doing wrong? Any help would be greatly appreciated.. Waiting for your replies..please help. Tag: Multiple Monitor support in CE 6.0 Tag: 111822
  - 10
    - How to implement the display driver for CPU-interfaced LCD? Dear Friends all over the world, The CPU-interface LCD has it's internal GRAM and is accessed by only data bus. I'm thinking about to design the device driver for that kinds of LCD. I wonder if there's someone else has done this before, or there's already sample driver from Microsoft. Thanks in advance! Best Regards, Michael from China, HangZhou Tag: Multiple Monitor support in CE 6.0 Tag: 111820
  - 11
    - Compact flash is not detected Hi all, I am working on PXA270 processor the Compact Flash is not detected on Zeus board in WINCE 5.0. I have Register settings : ; PCMCIA slot 0 [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCC_QUANTUM] "Dll"="pcc_zeus.dll" "Order"=dword:2 "ClientIrq"=dword:1c ; Client Irq ;"Irq"=multi_sz:"2A", "29" ; CSC (42) and CD (41) Irqs ;"SysIntr"=multi_sz:"15", "0" ; CSC (21) and CD (0) SysIntrs ; "Irq"=dword:2A ; CSC (42) "SysIntr"=dword:1d ; CSC (17) ;"PollingMode"=dword:1 "PollingMode"=dword:0 ;"PollTimeout"=dword:200 "SlotNumber"=dword:0 "PCCARDDLL"="pcc_serv.dll" ;"NoISR"=dword:1 ; Do not load any ISR. "IClass"=multi_sz:"{57430CF2-A260-4c9b-8F5C-FEF89217FE7C}=%b","{44985F1F-2C07-4009-A6B7-D250785D5336}=%b" [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCC_QUANTUM\WindowEntry1] "RepeatCount"=dword:1 ; 1 instance of the memory window "WindowInfoWindowCaps"=dword:2 ; WIN_CAP_ATTRIBUTE "WindowInfoMemoryCaps"=dword:10 ; Restored "WindowInfoMemMinSize"=dword:00001000 ; require 4k alignment "WindowInfoMemMaxSize"=dword:04000000 ; 64MB attribute memory window "WindowInfoMemBase"=dword:28000000 ; base address of the memory window [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCC_QUANTUM\WindowEntry2] "RepeatCount"=dword:1 ; 2 instance of the memory window "WindowInfoWindowCaps"=dword:1 ; WIN_CAP_COMMON "WindowInfoMemoryCaps"=dword:10 ; MEM_CAP_16BIT | MEM_CAP_8BIT "WindowInfoMemMinSize"=dword:00001000 ; require 4k alignment "WindowInfoMemMaxSize"=dword:04000000 ; 64MB common memory window "WindowInfoMemBase"=dword:2C000000 ; base address of the memory window [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCC_QUANTUM\WindowEntry3] "RepeatCount"=dword:2 ; 2 instances of the IO window "WindowInfoWindowCaps"=dword:4 ; WIN_CAP_IO "WindowInfoIOCaps"=dword:10 ; IO_CAP_8BIT | IO_CAP_16BIT "WindowInfoIOMinSize"=dword:1000 ; require 4 byte alignment "WindowInfoIOMaxSize"=dword:02000000 "WindowInfoIOGranularity"=dword:1 "WindowInfoIOFirstByte"=dword:20000000 "WindowInfoIOLastByte"=dword:21ffffff "WindowStateState"=dword:1 ; WIN_STATE_MAPS_IO [HKEY_LOCAL_MACHINE\Drivers\PCCARD\PCMCIA\TEMPLATE\PCMCIA] "Dll"="pcmcia.dll" "NoConfig"=dword:1 "NoISR"=dword:1 "IClass"=multi_sz:"{6BEAB08A-8914-42fd-B33F-61968B9AAB32}=PCMCIA Card Services" [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\PCMCIA] "Folder"="CFDisk" [HKEY_LOCAL_MACHINE\Drivers\PCCARD\PCMCIA\TEMPLATE\PCMCIA\CF_Card-CFA_32MB_CTS-920D] "Dll"="ATADISK.DLL" "Prefix"="DSK" "Ioctl"=dword:4 "Profile"="PCMCIA" "FSD"="FATFS.DLL"; Indicate we are a power manageable interface and a storage driver "IClass"=multi_sz:"{8DD679CE-8AB4-43c8-A14A-EA4963FAA715}","{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" Is any body know the perfect registry settings for that? Thank you in adavance Swapnil manglekar Tag: Multiple Monitor support in CE 6.0 Tag: 111819
  - 12
    - WinCE 4.2 Platform Builder, WiFi, Need Help I just bought a used ViewSonic V210 that runs an xScale processor. I downloaded a platform image from viewsonic and installed it to make the unit like new (it was also missing a few things when I got it.) Installing this image took the wireless connectivity from my V210. I'm trying to figure out how to rebuild an image that has the wireless support and that I can install on my unit. Can someone help me out with building an image that will work on this device. Viewsonic's support is worthless. Tag: Multiple Monitor support in CE 6.0 Tag: 111814
  - 13
    - NetApiBufferFree and DsGetDcNameW missing when build Kerberos.dll HI Microsoft Engineer: After installed the "Roll-up QEF to 2007", the Kerberos.dll was not created from sysgen. So I checked the build.log found the "kerberos.dll" link error LNK1120: 2 unresolved externals. NetApiBufferFree, and DsGetDcNameW was not refered from lib list. The Link statement from build. link /LARGEADDRESSAWARE -out:C:\WINCE500\PBWorkspaces\CIVLUCESTB\WINCE500\CIVLU_x86\cesysgen\oak\target\x86\retail\kerberos.dll -dll -machine:x86 @DllLinkOpt2.txt Microsoft (R) Incremental Linker Version 7.10.4017 Copyright (C) Microsoft Corporation. All rights reserved. -nodefaultlib -entry:DllMain -pdb:C:\WINCE500\PBWorkspaces\CIVLUCESTB\WINCE500\CIVLU_x86\cesysgen\oak\target\x86\retail\kerberos.pdb /opt:ref -debug -debugtype:cv -incremental:no -map:C:\WINCE500\PBWorkspaces\CIVLUCESTB\WINCE500\CIVLU_x86\cesysgen\oak\target\x86\retail\kerberos.map -savebaserelocations:C:\WINCE500\PBWorkspaces\CIVLUCESTB\WINCE500\CIVLU_x86\cesysgen\oak\target\x86\retail\kerberos.rel -MERGE:.rdata=.text -ignore:4001,4070,4078,4086,4089,4096,4099,4108,4229 /STACK:65536,4096 -subsystem:windowsce,5.00 /base:0x10000000 C:\WINCE500\public\common\oak\lib\x86\retail\kerberos.lib C:\WINCE500\PBWorkspaces\CIVLUCESTB\WINCE500\CIVLU_x86\cesysgen\oak\lib\x86\retail\msasn1.lib C:\WINCE500\PBWorkspaces\CIVLUCESTB\WINCE500\CIVLU_x86\cesysgen\oak\lib\x86\retail\cryptdll.lib C:\WINCE500\PBWorkspaces\CIVLUCESTB\WINCE500\CIVLU_x86\cesysgen\sdk\lib\x86\retail\winsock.lib C:\WINCE500\PBWorkspaces\CIVLUCESTB\WINCE500\CIVLU_x86\cesysgen\sdk\lib\x86\retail\coredll.lib C:\WINCE500\public\common\sdk\lib\x86\retail\corelibc.lib C:\WINCE500\PBWorkspaces\CIVLUCESTB\WINCE500\CIVLU_x86\cesysgen\oak\lib\x86\retail\kerberos.exp kerberos.lib(rpcutil.obj) : error LNK2019: unresolved external symbol _NetApiBufferFree referenced in function "long __cdecl CE_DiscoverDC(unsigned short const *,unsigned short * *,unsigned long *,unsigned long *)" (?CE_DiscoverDC@@YAJPBGPAPAGPAK2@Z) kerberos.lib(rpcutil.obj) : error LNK2019: unresolved external symbol __imp__DsGetDcNameW referenced in function "long __cdecl CE_DiscoverDC(unsigned short const *,unsigned short * *,unsigned long *,unsigned long *)" (?CE_DiscoverDC@@YAJPBGPAPAGPAK2@Z C:\WINCE500\PBWorkspaces\CIVLUCESTB\WINCE500\CIVLU_x86\cesysgen\oak\target\x86\retail\kerberos.dll : fatal error LNK1120: 2 unresolved externals The inline file -nodefaultlib -entry:DllMai -pdb:C:\WINCE500\PBWorkspaces\CIVLUCESTB\WINCE500\CIVLU_x86\cesysgen\oak\target\x86\retail\kerberos.pdb /opt:ref -debug -debugtype:cv -incremental:n -map:C:\WINCE500\PBWorkspaces\CIVLUCESTB\WINCE500\CIVLU_x86\cesysgen\oak\target\x86\retail\kerberos.ma -savebaserelocations:C:\WINCE500\PBWorkspaces\CIVLUCESTB\WINCE500\CIVLU_x86\cesysgen\oak\target\x86\retail\kerberos.rel -MERGE:.rdata=.text -ignore:4001,4070,4078,4086,4089,4096,4099,4108,4229 /STACK:65536,4096 -subsystem:windowsce,5.00 /base:0x10000000 Please help! What went wrong about the Roll-up update? Thanks Lu Tag: Multiple Monitor support in CE 6.0 Tag: 111813
  - 14
    - audio dma to spi Hi, i want to transfer audio Dma Channel 1 to audio chip with SPI3. i allocate memory for dma buffer, create dma descriptor, initialize spi3. spi clock is working but nothing on tx line. log is below. does any one has a sample which transfers audio buffer to spi3 or any idea what could be wrong ? +OEMInterruptHandler (25) +OEMInterruptHandler BoardLevel IRQ_DMAC (25) g_pDMAReg->dint:0x2 DMA_AUDIO_INTR:0x32 +OEMInterruptHandler IRQ_DMAC:25 SYSINTR_AUDIO Wave: dcsr: 0x80000000 PDD_AudioGetInterruptType+ Wave: Dma Chnl:0x1 OutputDmaInterrupt:0x4 - Dma Chnl InputDmaInterrupt:0x4 Wave:PDD_AudioGetInterruptType 2 AUDIO_STATE_OUT_PLAYING Wave: PDD_AudioGetInterruptType- +OEMInterruptHandler (25) +OEMInterruptHandler BoardLevel IRQ_DMAC (25) g_pDMAReg->dint:0x2 DMA_AUDIO_INTR:0x32 +OEMInterruptHandler IRQ_DMAC:25 SYSINTR_AUDIO MDD Audio Playing Wave: dcmd: 0x9021C390 Wave: WPDM_START- MDD No more data. List is NULL. Stopping audio Wave: WPDM_ENDOFDATA+ Wave: WaveOutEndOfData. Wave: WPDM_ENDOFDATA- MDD No input state change. Do nothing Wave: PDD_AudioGetInterruptType+ Wave: Dma Chnl:0x1 OutputDmaInterrupt:0x4 - Dma Chnl InputDmaInterrupt:0x4 Wave:PDD_AudioGetInterruptType 2 AUDIO_STATE_OUT_STOPPED Wave: PDD_AudioGetInterruptType- +OEMInterruptHandler (25) +OEMInterruptHandler BoardLevel IRQ_DMAC (25) g_pDMAReg->dint:0x2 DMA_AUDIO_INTR:0x32 +OEMInterruptHandler IRQ_DMAC:25 SYSINTR_AUDIO MDD Audio Stopped! Wave: WPDM_STANDBY+ Wave: StopDmaOut Wave: WaveOutStandby. Wave: WPDM_STANDBY- MDD No input state change. Do nothing Wave: PDD_AudioGetInterruptType+ Wave: Dma Chnl:0x1 OutputDmaInterrupt:0xc - Dma Chnl InputDmaInterrupt:0x4 Wave:PDD_AudioGetInterruptType 1 AUDIO_STATE_OUT_STOPPED Wave: PDD_AudioGetInterruptType- /////same log forever Thanks Tag: Multiple Monitor support in CE 6.0 Tag: 111804
  - 15
    - Illegal entry point combination in driver dll I wrote an USB driver under Windows CE, I just wrote three functions, namely,USBDeviceAttach,USBInstallDriver, and USBUninstallDriver. I also wrote the DLLMain function as an entry. However,when I down it to Win CE, the following problem exists: Illegal entry point combination in driver dll "SunPlus_WCE.dll" I appreciate your suggestion Tag: Multiple Monitor support in CE 6.0 Tag: 111802
  - 16
    - Add user defined file to my SDK Hi, For some reason my (CE6.0) BSP does not add the driver-interface include-files to the SDK. I want to add these myself. I tried to follow "Adding User-defined Files to an SDK", but this leads me around in circles without providing the required info. From what I understand sofar I need to add a VBS script in a folder, which would specify the files to add. I tried using "additional folders", but it won't accept the folder I refer to (because I have no VBS there ?). The page on MSDN which I would expect to contain a sample script, provides only a link, which is wrong (to main MSDN page)..... Am I missing something here ? Can someone show me a sample VBS script ? No UI-based procedure somewhere to add files ? Greetings, Rob. Tag: Multiple Monitor support in CE 6.0 Tag: 111798
  - 17
    - pxa270 resume halt when restore GPIO Hi, Do anyone know when pxa270 resume from suspend, it will execute GPIO retore function. I face a problem is that, the execution halt when running this function... Any ideas, Best regards, -- Message posted via PocketPCJunkies.com http://www.pocketpcjunkies.com/Uwe/Forums.aspx/wince-pb/200804/1 Tag: Multiple Monitor support in CE 6.0 Tag: 111797
  - 18
    - Data Abort in TCPSTK.dll Hi, I'm developing a Windows CE 6.00 (VS2005) application for an ARM (CIRRUS EP9302). I've a problem adding the SYSGEN_MINGWES catalog item in debug mode. I've a solution that boots fine without Windows Messaging, but if I try to add "SYSGEN_MINGWES" to the solution with IMGNOKITL = 0 and IMGNODEBUGER = 0 the boot stops and the debugger shows this during the loading of tcpstk.dll: 99753 PID:400002 TID:d30002 OSAXST1: >>> Loading Module 'tcpstk.dll' (0x81BA59C0) at address 0xC0620000-0xC06F6000 in Process 'NK.EXE' (0x81853AA0) 100049 PID:400002 TID:d30002 Exception 'Data Abort' (4): Thread-Id=00d30002(pth=817698f8), Proc-Id=00400002(pprc=81853aa0) 'NK.EXE', VM-active=01220002(pprc=817bceb8) 'shell.exe' 100049 PID:400002 TID:d30002 PC=c0105cf0(k.coredll.dll+0x00045cf0) RA=c0104f48(k.coredll.dll+0x00044f48) SP=d028d864, BVA=c061ffff 111546 PID:400002 TID:d30002 Exception 'Raised Exception' (-1): Thread-Id=00d30002(pth=817698f8), Proc-Id=00400002(pprc=81853aa0) 'NK.EXE', VM-active=01220002(pprc=817bceb8) 'shell.exe' 111547 PID:400002 TID:d30002 PC=c00ec578(k.coredll.dll+0x0002c578) RA=8010acfc(kernel.dll+0x00019cfc) SP=d028d02c, BVA=ffffffff The debugger stops at this function: inline void AsciiToUnicode (LPWSTR wchptr, LPCSTR chptr, int maxlen) in "loader_core.h". When the exception occours "chptr" is "Bad Ptr", instead when this function is called by the loading of others dll "chptr" contains the dll name (ex. "AFD.DLL"). If I build the solution in release mode Windows CE boots fine. Can anyone help me to solve this problem? I need the debugger... Thanks Tag: Multiple Monitor support in CE 6.0 Tag: 111777
  - 19
    - FileSystem(CE5)-maximum number of files per directory Is there a limit to the maximum number of files per directory (or folder)? thanks, sam Tag: Multiple Monitor support in CE 6.0 Tag: 111776
  - 20
    - Locking Desktop ICON Hello: I am using Wince 5.00 OS, is it possible to lock desktop ICON to a fixed position, so the user can not move it around. Thanks Tag: Multiple Monitor support in CE 6.0 Tag: 111774
  - 21
    - Could XPe, WINCE 5.0 and WINCE 6.0 be installed in a system ? Dear Sir, Because I must use XPe, WINCE 5.0 and WINCE 6.0 on my job, could it possible install them in a system ? BR, Wiles Tag: Multiple Monitor support in CE 6.0 Tag: 111770
  - 22
    - Folders created on the HDD are not persistence across reboots. I'm booting my box with CF and there is a HDD (We have geodied hence the registry geoide.reg) which is detected as 'Disk' and the CF has been detected as 'Disk1'. Everything is well and good. But if I create any directory or files on 'Disk' that is HDD it is not persistent after I reboot the box. What changes I have to make in the registry to solve this issue ? Here are my registry settings:- ; HIVE BOOT SECTION [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles] "AutoMount"=dword:1 "AutoPart"=dword:1 "AutoFormat"=dword:1 "MountFlags"=dword:0 "DefaultFileSystem"="" "PartitionDriverName"="MSPART" "Folder"=LOC_STORE_DEFAULT_FOLDER ; @CESYSGEN IF PM_PM_DEFAULT_PDD "ActivityEvent"="PowerManager/ActivityTimer/SystemActivity" ; @CESYSGEN ENDIF ; PM_PM_DEFAULT_PDD ; HIVE BOOT SECTION ; @CESYSGEN IF CE_MODULES_ATAPI [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\HDProfile] "Name"="IDE Hard Disk Drive" "Folder"=LOC_STORE_HD_FOLDER [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\HDProfile\FATFS] "EnableCacheWarm"=dword:0 ----------------------------------------------------------------- ; ; Copyright (c) Microsoft Corporation. All rights reserved. ; ; ; Use of this source code is subject to the terms of the Microsoft end-user ; license agreement (EULA) under which you licensed this SOFTWARE PRODUCT. ; If you did not accept the terms of the EULA, you are not authorized to use ; this source code. For a copy of the EULA, please see the LICENSE.RTF on your ; install media. ; ; This file is to be included in platform.reg if required. ; ; $(PCI_BUS_ROOT) is a variable that needs to be set in the including ; platform.reg. It's value will be something like ; HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCI ; SpawnFunction specified in platform.reg. [$(PCI_BUS_ROOT)\Template\GeodeIDE] "IClass"=multi_sz:"{CDDC3621-3512-4b3f-BB6F-B4DD5E061795}" "Prefix"="IDE" "Dll"="atapi.dll" "Order"=dword:2 "Class"=dword:01 "SubClass"=dword:01 "VendorID"=dword:1078 "ConfigEntry"="GenericConfig" ; PCI configuration entry point "Legacy"=dword:01 ; legacy, use Irq for primary and Irq+1 for secondary "Irq"=dword:0E ; 14 "SysIntr"=dword:00 ; SysIntr not specified "DMAAlignment"=dword:10 ; default DMA alignment "SoftResetTimeout"=dword:03 ; ATA/ATAPI spec defines 31s ceiling; this is too long "StatusPollCycles"=dword:100 ; Status register DRQ/BSY polling; 256 poll cycles "StatusPollsPerCycle"=dword:20 ; Status register DRQ/BSY polling; 32 polls per cycle "StatusPollCyclePause"=dword:05 ; Status register DRQ/BSY polling; 5 milliseconds between poll cycles ; "IsrDll"="" ; not required ; "IsrHandler"="" ; not required "RegisterStride"=dword:01 ; ATA register stride; register block is contiguous [$(PCI_BUS_ROOT)\Template\GeodeIDE\Device0] "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" "Prefix"="DSK" "Dll"="atapi.dll" "InterruptDriven"=dword:01 ; enable interrupt driven I/O "DMA"=dword:01 ; enable DMA "DoubleBufferSize"=dword:10000 ; 128 sector (65536 byte) double buffer "DrqDataBlockSize"=dword:200 ; 1 sector (512 byte) DRQ data block "WriteCache"=dword:01 ; enable on-disk write cache "LookAhead"=dword:01 ; enable on-disk look-ahead "DeviceId"=dword:00 ; device 0, i.e., primary master "TransferMode"=dword:FF ; use device default transfer mode (Ultra DMA 3, 4 require 80-conductor cable) [$(PCI_BUS_ROOT)\Template\GeodeIDE\Device1] "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" "Prefix"="DSK" "Dll"="atapi.dll" "InterruptDriven"=dword:01 ; enable interrupt driven I/O "DMA"=dword:01 ; enable DMA "DoubleBufferSize"=dword:10000 ; 128 sector (65536 byte) double buffer "DrqDataBlockSize"=dword:200 ; 1 sector (512 byte) DRQ data block "WriteCache"=dword:01 ; enable on-disk write cache "LookAhead"=dword:01 ; enable on-disk look-ahead "DeviceId"=dword:01 ; device 1, i.e., primary slave "TransferMode"=dword:FF ; use device default transfer mode (Ultra DMA 3, 4 require 80-conductor cable) [$(PCI_BUS_ROOT)\Template\GeodeIDE\Device2] "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" "Prefix"="DSK" "Dll"="atapi.dll" "InterruptDriven"=dword:01 ; enable interrupt driven I/O "DMA"=dword:01 ; enable DMA "DoubleBufferSize"=dword:10000 ; 128 sector (65536 byte) double buffer "DrqDataBlockSize"=dword:200 ; 1 sector (512 byte) DRQ data block "WriteCache"=dword:01 ; enable on-disk write cache "LookAhead"=dword:01 ; enable on-disk look-ahead "DeviceId"=dword:02 ; device 2, i.e., secondary master "TransferMode"=dword:FF ; use device default transfer mode (Ultra DMA 3, 4 require 80-conductor cable) [$(PCI_BUS_ROOT)\Template\GeodeIDE\Device3] "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" "Prefix"="DSK" "Dll"="atapi.dll" "InterruptDriven"=dword:01 ; enable interrupt driven I/O "DMA"=dword:01 ; enable DMA "DoubleBufferSize"=dword:10000 ; 128 sector (65536 byte) double buffer "DrqDataBlockSize"=dword:200 ; 1 sector (512 byte) DRQ data block "WriteCache"=dword:01 ; enable on-disk write cache "LookAhead"=dword:01 ; enable on-disk look-ahead "DeviceId"=dword:03 ; device 3, i.e., secondary slave "TransferMode"=dword:FF ; use device default transfer mode (Ultra DMA 3, 4 require 80-conductor cable) IF PRJ_ENABLE_FSREGHIVE ; HIVE BOOT SECTION [$(PCI_BUS_ROOT)\Template\GeodeIDE] "Flags"=dword:1000 [$(PCI_BUS_ROOT)\Template\GeodeIDE\Device0] "Flags"=dword:1000 ; END HIVE BOOT SECTION ENDIF PRJ_ENABLE_FSREGHIVE Tag: Multiple Monitor support in CE 6.0 Tag: 111761
  - 23
    - ASN.1 support in WinCE? Hi all, Does anyone know any free asn.1 compiler and codecs for BER under WinCE? I can only find that it is mentioned in SNMP and LDAP. Any comment appreciated!! Hao Tag: Multiple Monitor support in CE 6.0 Tag: 111760
  - 24
    - PCI to multi serial Hi all, In widows we have mf.sys(multifunction enumerator) where we can get the PDO's for default serial devices and get this stuff work. In WinCE i saw the code for PCMCIA card,how can i start for writing the driver for PCI to multiserial in WinCE . Any initiative is appreciated. Regards Rocky Tag: Multiple Monitor support in CE 6.0 Tag: 111759
  - 25
    - mpeg1 codec converting y41p to yuy2 incorrectly on overlay Hi there, i am working on a graphics driver. A customer of ours has an issue with one particular type of stream when played with WinCE 5.0 or 6.0 ceplayer, the output comes out corrupted... its an MPEG1 stream which eventually uses overlay with a yuyu2 format. As far as i have debugged so far, our driver seems to be doing everything fine (ddraw init, caps reporting, surface creation, lock/unlock... etc). Using other dd ovl apps and even some streams, we can get yuy2 output to appear fine. After turning on additional debug messages in quartz.dll, we know that the filter graph dump == video renderer <- mpeg video codec <- mpeg-1 stream spitter.... and we also believe that the MPEG video codec initially tries to negotiate a Y41P format which the video renderer fails and proposes YUY2. (our driver isnt aware of this event because we report dd caps as only supporting 422 packed and 420 planar formats). However when the player starts outputting the data (via successful locks and flips), its visually corrupted... but the corruption has a very clear pattern to it. Inspecting it closely, it looks like the video renderer (or the codec) is not moving to the next line properly - it looks like after copying an entire width of pixels, it doesnt increment the dest ptr by the balance of pitch in bytes, it simply continues with the next line of pixels on this same scanline (since our overlay surface pitch is bigger than the width) ... i can confirm this by hacking my driver to ensure the width and pitch is the same - which the hardware wont like depending on the dimensions - we usually let the driver dictate the pitch. when i do this, then the output looks good. Note that other streams when forced to run in yuy2 (by removing the yuv planar caps in my dd driver), work fine. I think this is unique to the possibility of a Y41P to Yuy2 conversion happenning in the mpeg1 codec. Could someone help reply to me on whether my hunch about wether this mpeg1 codec bug is valid? Tag: Multiple Monitor support in CE 6.0 Tag: 111758
- Next
  - 1
    - Editing display driver for 32bpp Hello to All, I am working in WINCE 5.0. i want to write /change the display driver to use 32 bit color plattee on the LCD. I search on the internet but can't get any reasonable help to do this job. Can any one help me, I shall be very thankfull... Any help will be appriciated...................Thanks -- Message posted via http://www.pocketpcjunkies.com Tag: Multiple Monitor support in CE 6.0 Tag: 111745
  - 2
    - How prism2 WLAN PCMCIA Driver work Hi All, I am working on PXA270 processor in WINCE 5.0 Is any body know how the Prism2 WLAN PCMCIA Driver is working?? Is any Extra Register Enteries are Required?? Thanks in Advance Best Regards Swapnil manglekar Tag: Multiple Monitor support in CE 6.0 Tag: 111744
  - 3
    - WindowsEntry required for prism2 WLAN PCMCIA Driver?? Hi all , I am using "Intersil Prism2 WLAN PCMCIA Driver" i fetches some problem with "islp2nds.dll" file it Loadded when it recognize the driver but after some time it is Unloadded automatically. Is any body know why this is happening ? Is any Windows or Register enteries Require for this?? Thank You in Adavance Best Regards Swapnil Manglekar Tag: Multiple Monitor support in CE 6.0 Tag: 111742
  - 4
    - Windows Enteries for Intersil Prism2 WLAN PCMCIA Driver?? Hi all, My board recognize "Intersil Prism2 WLAN PCMCIA Driver" but the "ISLP2NDS.DLL" is Loadded for sometime after that it is automatically Unloadded Is any windows entery missing? I posted my .reg entries Is any entry missing in that?? [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCC_QUANTUM] "Dll"="pcc_zeus.dll" "Order"=dword:2 "ClientIrq"=dword:1c ; Client Irq ;"Irq"=multi_sz:"2A", "29" ; CSC (42) and CD (41) Irqs ;"SysIntr"=multi_sz:"15", "0" ; CSC (21) and CD (0) SysIntrs ; "Irq"=dword:2A ; CSC (42) "SysIntr"=dword:1d ; CSC (17) ;"PollingMode"=dword:1 "PollingMode"=dword:0 ;"PollTimeout"=dword:200 "SlotNumber"=dword:0 "PCCARDDLL"="pcc_serv.dll" ;"NoISR"=dword:1 ; Do not load any ISR. "IClass"=multi_sz:"{57430CF2-A260-4c9b-8F5C-FEF89217FE7C}=%b","{44985F1F-2C07-4009-A6B7-D250785D5336}=%b"[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCC_QUANTUM\WindowEntry1] "RepeatCount"=dword:1 ; 1 instance of the memory window "WindowInfoWindowCaps"=dword:2 ; WIN_CAP_ATTRIBUTE "WindowInfoMemoryCaps"=dword:10 ; Restored "WindowInfoMemMinSize"=dword:00001000 ; require 4k alignment "WindowInfoMemMaxSize"=dword:04000000 ; 64MB attribute memory window "WindowInfoMemBase"=dword:28000000 ; base address of the memory window[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCC_QUANTUM\WindowEntry2] "RepeatCount"=dword:1 ; 2 instance of the memory window "WindowInfoWindowCaps"=dword:1 ; WIN_CAP_COMMON "WindowInfoMemoryCaps"=dword:10 ; MEM_CAP_16BIT | MEM_CAP_8BIT "WindowInfoMemMinSize"=dword:00001000 ; require 4k alignment "WindowInfoMemMaxSize"=dword:04000000 ; 64MB common memory window "WindowInfoMemBase"=dword:2C000000 ; base address of the memory window[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCC_QUANTUM\WindowEntry3] "RepeatCount"=dword:3 ; 2 instances of the IO window "WindowInfoWindowCaps"=dword:4 ; WIN_CAP_IO "WindowInfoIOCaps"=dword:10 ; IO_CAP_8BIT | IO_CAP_16BIT "WindowInfoIOMinSize"=dword:1000 ; require 4 byte alignment "WindowInfoIOMaxSize"=dword:02000000 "WindowInfoIOGranularity"=dword:1 "WindowInfoIOFirstByte"=dword:20000000 "WindowInfoIOLastByte"=dword:21ffffff "WindowStateState"=dword:1 ; WIN_STATE_MAPS_IO[HKEY_LOCAL_MACHINE\Drivers\PCCARD\PCMCIA\TEMPLATE\PCMCIA] "Dll"="pcmcia.dll" "NoConfig"=dword:1 "NoISR"=dword:1 "IClass"=multi_sz:"{6BEAB08A-8914-42fd-B33F-61968B9AAB32}=PCMCIA CardServices"[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\PCMCIA] "Folder"="CFDisk"[HKEY_LOCAL_MACHINE\Drivers\PCCARD\PCMCIA\TEMPLATE\PCMCIA\CF_Card-CFA] "Dll"="ATADISK.DLL" "Prefix"="DSK" "Ioctl"=dword:4 "Profile"="PCMCIA" "FSD"="FATFS.DLL"; Indicate we are a power manageable interface and astorage driver "IClass"=multi_sz:"{8DD679CE-8AB4-43c8-A14A-EA4963FAA715}","{A4E7EDDA-E575-4252-9D6B-4195D48BB865}"[HKEY_LOCAL_MACHINE\Drivers\PCCARD\PCMCIA\TEMPLATE\PCMCIA\_-IEEE_802.11_Wireless_LAN/PC_Card-7EA7] "Dll"="NDIS.DLL" "Prefix"="NDS" "Miniport"="ISLP2"[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Detect\50] "Dll"="ATADISK.DLL" "Entry"="DetectATADisk"Thanks in AdavanceBest RegardsSwapnil Manglekar Tag: Multiple Monitor support in CE 6.0 Tag: 111738
  - 5
    - dhcp server from ce 5.0 hi? I have been implementing a NAT device using Ce 5.0. I have 4 lan ports and 1 wan port. And I configured a dhcp server for lan port by following registry setting. But I couldn't any document about setting dns server address for dhcp server setting. [HKEY_LOCAL_MACHINE\Comm\RTL81392\Parms\TcpIp] "EnableDHCP"=dword:0 "UseZeroBroadcast"=dword:0 "DefaultGateway"="192.168.0.1" "IpAddress"="192.168.0.1" "Subnetmask"="255.255.255.0" "DNS"="192.168.1.254.1" [HKEY_LOCAL_MACHINE\Comm\Tcpip\Parms] "IpEnableRouter"=dword:1 "EnableDHCP"=dword:1 [HKEY_LOCAL_MACHINE\Comm\ConnectionSharing] "DHCPLeaseTime"=dword:300 "EnablePacketFiltering"=dword:1 "DhcpAllocationStartRange"="2" "DhcpAllocationEndRange"="100" "EnableDhcpAllocator"=dword:1 "PrivateInterface"="RTL81392" "EnableAddressTranslation"=dword:1 "PublicInterface"="RTL81391" A pc connected with lan port got IP address from the dhcp server. But the dhcp client pc didn't get a dns server address because there was no setting for dns server. Doesn't the dhcp server from ce support dns server allocation? Tag: Multiple Monitor support in CE 6.0 Tag: 111732
  - 6
    - $3 core License Design Template Hi, May I know which is the best design templates (beside "custom device") to use for platform builder 5 if we are targeting for a $3 core license. Thanks Tag: Multiple Monitor support in CE 6.0 Tag: 111731
  - 7
    - System stop after resume from suspend ... Hi, The system thread stop running when resume from suspend state... ..............OSD_DebugCommsResume......................... Xllp_SuspendResume: State Restored: ResumePhase2Data=xa00ff420->xa00ff420 Xllp_SuspendResume: Wake Reason: PEDR=x00000002, PKSR=x00000000, ISCR=x00000000, IER=x00000000 Xllp_SuspendResume: Exit: (entry_CPSR=xa0000093) Xllp_SuspendResume: Exit: RCNR=x00000001, RTAR=x00000000, RTSR=x00000000, PICR=x00000000 Xllp_SuspendResume: Exit: RYAR1=x000fa622, RDAR1=x005a0000 Xllp_SuspendResume: Exit: OSCR0=x8251edb3, OSMR0=x8250a9fd, OIER=x00000001 Xllp_SuspendResume: Exit: OMCR4=x00000000, OMCR5=x00000000, OMCR6=x00000000, OMCR7=x00000000 OEMPowerOff: Xllp_SuspendAndResume(x804397a0) returned x00000000 OEMPowerOff: g_oalWakeSource => SYSWAKE_POWER_BUTTON(x00000403) 0x87d1ec64: Back from OEMPowerOff 0x87d1ec64: Calling device manager power proc. 0x87d1ec64: +FYS_PowerUp 0x87d1ec64: send low battery patch 0x87d1ec64: -FYS_PowerUp 0x87d1ec64: Calling GWES power proc. 0x87d1ec64: Returning to normally scheduled programming. I had check that the OS timer 0 interrup is running and by right the scheduler should continue to run... Do any one had faced this problem? -- Message posted via PocketPCJunkies.com http://www.pocketpcjunkies.com/Uwe/Forums.aspx/wince-pb/200804/1 Tag: Multiple Monitor support in CE 6.0 Tag: 111729
  - 8
    - Out-Of-Memory UI of windows ce 5.0 does not response to touch Dear All: The OOM UI does not response to touch. I added debug message for touch down and up in PDD. And also i added debug message for touch MDD receiving point from PDD. This is used to check the point and touch flags, such as down, valid, ... etc. I could see those debug messages and they are correct, point value and touch flags are all correct. But the OOM UI does not response to touch event. I used USB keyboard and the OOM UI could response to keyboard. I could use keyboard to select which applications to terminate. Why the OOM UI does not response to touch? Sincerely Tag: Multiple Monitor support in CE 6.0 Tag: 111728
  - 9
    - DirectDraw problem with wince 6.0 (LX800) Hi , I had build a wince 6.00 runtime for a Geode LX800 with DirectDraw support ! So far all look like well ! But I couln't launch the DDX programms for testing DDraw ! Here the debug messages : WPCSHELL: SHRecognizeGesture found WM_LBUTTONUP, dropping out of loop... DirectDraw Debug Runtime in use. AddToProcessInputLocaleTable: Added process to ProcessInputLocale table, hProcess = 0x01A6000A ERROR: C:\ymzki\private\winceos\COREOS\gwe\winmgr\wmbase\.\wbase.cpp line 1325: !bFound, etc. GWES Hook fails device creation. DirectDrawCreate fails. DDEX2: DirectDrawCreate FAILED DeleteFromProcessInputLocaleTable: Deleted process from ProcessInputLocale table, hProcess: 0x01A6000A anybody have an idea ? In wince 5.00 ddraw works fine with the Geode LX800 BTW: According the readme.txt the driver supports Direct Draw Display Driver Release Notes Version 1.01.03 Thanks in advance ! Helmut Tag: Multiple Monitor support in CE 6.0 Tag: 111715
  - 10
    - PB catalogue viewer doesn't know how to deal with #include in your PB scans .bib files to determine if the requirements are fulfilled for a catalogue entry to get checked to show that it is included (through <Module>xxxx</Module> entries in your catalogue entry). In our case we were seeing that PB failed to determine that the module was included and we got an X mark in front of our catalogue entry. We found out this was caused by including the entries for the modules through a #include file in our project .bib file. If we included the contents of that include file in our .bib PB would happily check our catalogue entry. So, the following does not work: ; file: project.bib #define PROJ_FILES_DIR $(_PUBLICROOT)\PROJ\OAK\FILES moduleA.dll $(_flatreleasedir)\moduleA.dll NK #include "$(PROJ_FILES_DIR)someotherstuff.bib" ---- ; file: someotherstuff.bib moduleB.dll $(_flatreleasedir)\moduleB.dll NK And the following works ; file: project.bib moduleA.dll $(_flatreleasedir)\moduleA.dll NK moduleB.dll $(_flatreleasedir)\moduleB.dll NK It is not really a major problem or anything but I would have expected that PB would know how to deal with including files into your .bib file (with respect to the catalog viewer). In our case there's lots to include and separating them just makes sense. Maybe MS can fix this or at least make users aware of ? -- Ronald Tag: Multiple Monitor support in CE 6.0 Tag: 111711
  - 11
    - Does ISLP2NDS.DLL work with Intersil Prism2 WLAN PCMCIA Driver ? hi all,Does ISLP2NDS.DLL work with the Intersil Prism2 WLAN PCMCIA DriverIn my case ISLP2NDS.DLL is loadded and unloadded why it doing like that Reg. Enteries are:;; PCMCIA slot 0[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCC_QUANTUM] "Dll"="pcc_zeus.dll" "Order"=dword:2 "ClientIrq"=dword:1c ; Client Irq;"Irq"=multi_sz:"2A", "29" ; CSC (42) and CD (41) Irqs;"SysIntr"=multi_sz:"15", "0" ; CSC (21) and CD (0) SysIntrs; "Irq"=dword:2A ; CSC (42) "SysIntr"=dword:1d ; CSC (17);"PollingMode"=dword:1 "PollingMode"=dword:0;"PollTimeout"=dword:200 "SlotNumber"=dword:0 "PCCARDDLL"="pcc_serv.dll";"NoISR"=dword:1 ; Do not load any ISR. "IClass"=multi_sz:"{57430CF2-A260-4c9b-8F5C-FEF89217FE7C}=%b","{44985F1F-2C07-4009-A6B7-D250785D5336}=%b"[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCC_QUANTUM\WindowEntry1] "RepeatCount"=dword:1 ; 1 instance of the memory window "WindowInfoWindowCaps"=dword:2 ; WIN_CAP_ATTRIBUTE "WindowInfoMemoryCaps"=dword:10 ; Restored "WindowInfoMemMinSize"=dword:00001000 ; require 4k alignment "WindowInfoMemMaxSize"=dword:04000000 ; 64MB attribute memory window "WindowInfoMemBase"=dword:28000000 ; base address of the memory window[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCC_QUANTUM\WindowEntry2] "RepeatCount"=dword:1 ; 2 instance of the memory window "WindowInfoWindowCaps"=dword:1 ; WIN_CAP_COMMON "WindowInfoMemoryCaps"=dword:10 ; MEM_CAP_16BIT | MEM_CAP_8BIT "WindowInfoMemMinSize"=dword:00001000 ; require 4k alignment "WindowInfoMemMaxSize"=dword:04000000 ; 64MB common memory window "WindowInfoMemBase"=dword:2C000000 ; base address of the memory window[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCC_QUANTUM\WindowEntry3] "RepeatCount"=dword:3 ; 2 instances of the IO window "WindowInfoWindowCaps"=dword:4 ; WIN_CAP_IO "WindowInfoIOCaps"=dword:10 ; IO_CAP_8BIT | IO_CAP_16BIT "WindowInfoIOMinSize"=dword:1000 ; require 4 byte alignment "WindowInfoIOMaxSize"=dword:02000000 "WindowInfoIOGranularity"=dword:1 "WindowInfoIOFirstByte"=dword:20000000 "WindowInfoIOLastByte"=dword:21ffffff "WindowStateState"=dword:1 ; WIN_STATE_MAPS_IO[HKEY_LOCAL_MACHINE\Drivers\PCCARD\PCMCIA\TEMPLATE\PCMCIA] "Dll"="pcmcia.dll" "NoConfig"=dword:1 "NoISR"=dword:1 "IClass"=multi_sz:"{6BEAB08A-8914-42fd-B33F-61968B9AAB32}=PCMCIA Card Services"[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\PCMCIA] "Folder"="CFDisk"[HKEY_LOCAL_MACHINE\Drivers\PCCARD\PCMCIA\TEMPLATE\PCMCIA\CF_Card-CFA] "Dll"="ATADISK.DLL" "Prefix"="DSK" "Ioctl"=dword:4 "Profile"="PCMCIA" "FSD"="FATFS.DLL"; Indicate we are a power manageable interface and a storage driver "IClass"=multi_sz:"{8DD679CE-8AB4-43c8-A14A-EA4963FAA715}","{A4E7EDDA-E575-4252-9D6B-4195D48BB865}"[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\_-IEEE_802.11_Wireless_LAN/PC_Card-7EA7] "Dll"="NDIS.DLL" "Prefix"="NDS" "Miniport"="ISLP2"[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Detect\50] "Dll"="ATADISK.DLL" "Entry"="DetectATADisk"Is any registry settings are required rather than this entries?and my program o/p:4294830685 PID:a7e998be TID:a7d523f2 0x87d52984: SES:CreateDeviceID _-IEEE_802.11_Wireless_LAN/PC_Card-7EA7 done4294830698 PID:a7e998be TID:a7d523f2 0x87d52984: SES:CreateDeviceID _-IEEE_802.11_Wireless_LAN/PC_Card-7EA7 done4294830731 PID:a7e998be TID:a7e99192 0x87eddd28: ZCF:: InfContext [0x4f1b0] created..4294830806 PID:a7e998be TID:a7e99192 0x87eddd28: ZCF:: Warning! File[c:\macallan\private\winceos\comm\layer2svc\zeroconfig\server\state.c] -- Line[464] : DevioGetIntfStats failed for Intf context 0x0004F1B04294830825 PID:a7e998be TID:67d30fda 0x87d4c9b8: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\PCMCIA\_-IEEE_802.11_Wireless_LAN/PC_Card-7EA7\BusPrefix) returned 24294832130 PID:a7e998be TID:a7e99192 0x87eddd28: ZCF:: $$$ IntfContext [0x4f1b0] deleted..4294832150 PID:a7e998be TID:a7e99192 0x87eddd28: ZCF:: InfContext [0x4f1b0] created..4294832344 PID:a7e998be TID:a7e99192 0x87eddd28: ZCF:: Warning! File[c:\macallan\private\winceos\comm\layer2svc\zeroconfig\server\state.c] -- Line[464] : DevioGetIntfStats failed for Intf context 0x0004F1B04294832375 PID:a7e998be TID:a7e99192 0x87eddd28: ZCF:: $$$ IntfContext [0x4f1b0] deleted..4294832386 PID:a7e998be TID:a7e99192 0x87eddd28: WLCLIENT:: CreateFile() failed on [WLS1:], OK during bootup4294832513 PID:a7e998be TID:a7e99192 0x87eddd28: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\WLSVC\BusPrefix) returned 24294834658 PID:a7e998be TID:87e6c1aa 0x87ed9400: [NOTIFY] HandleSystemEvent 7 /ADD ZCF1:4294834992 PID:a7e998be TID:67d30fda 0x87d4c9b8: >>> Loading module islp2nds.dll at address 0x036D0000-0x037F7000 (RW data at 0x01F0F000-0x01F97C4E)Loaded symbols for 'E:\WINCE500\PBWORKSPACES\ZEUSZBIG\RELDIR\ZEUS_ARMV4I_DEBUG\ISLP2NDS.DLL'4294836221 PID:a7e998be TID:67d30fda 0x87d4c9b8: ==>NdisInitializeWrapper4294836232 PID:a7e998be TID:67d30fda 0x87d4c9b8: <==NdisInitializeWrapper4294836241 PID:a7e998be TID:67d30fda 0x87d4c9b8: ==>NdisMRegisterMiniport: NdisWrapperHandle 000533904294836252 PID:a7e998be TID:67d30fda 0x87d4c9b8: ==>ndisRegisterMiniportDriver: NdisWrapperHandle 000533904294836270 PID:a7e998be TID:67d30fda 0x87d4c9b8: <==ndisRegisterMiniportDriver: MiniBlock 000534004294836281 PID:a7e998be TID:67d30fda 0x87d4c9b8: NdisMRegisterMiniport: MiniBlock 000534004294836308 PID:a7e998be TID:a7e99192 0x87eddd28: >>> Loading module oneex.dll at address 0x038A0000-0x038EA000 (RW data at 0x01F9C000-0x01F9F9DC)Loaded symbols for 'E:\WINCE500\PBWORKSPACES\ZEUSZBIG\RELDIR\ZEUS_ARMV4I_DEBUG\ONEEX.DLL'4294842068 PID:a7e998be TID:a7e99192 0x87eddd28: >>> Loading module wzcsapi.dll at address 0x03990000-0x03997000 (RW data at 0x01FAB000-0x01FAB494)Loaded symbols for 'E:\WINCE500\PBWORKSPACES\ZEUSZBIG\RELDIR\ZEUS_ARMV4I_DEBUG\WZCSAPI.DLL'4294842084 PID:a7e998be TID:a7e99192 0x87eddd28: >>> Loading module wlsvc.dll at address 0x038F0000-0x0392F000 (RW data at 0x01FA1000-0x01FA179C)Loaded symbols for 'E:\WINCE500\PBWORKSPACES\ZEUSZBIG\RELDIR\ZEUS_ARMV4I_DEBUG\WLSVC.DLL'4294842141 PID:a7e998be TID:67d30fda 0x87d4c9b8: <==NdisMRegisterMiniport: MiniBlock 00053400, Status 04294842166 PID:a7e998be TID:67d30fda 0x87d4c9b8: 4294842177 PID:a7e998be TID:67d30fda 0x87d4c9b8: ndisMInitializeAdapter: Miniport 00054960, 4294842198 PID:a7e998be TID:67d30fda 0x87d4c9b8: ==>ndisQueueMiniportOnDriver: Miniport 00054960, MiniBlock 000534004294842210 PID:a7e998be TID:67d30fda 0x87d4c9b8: <==ndisQueueMiniportOnDriver: Miniport 00054960, MiniBlock 00053400, rc 14294842233 PID:a7e998be TID:c7e09846 0x87d98bb0: GetDhcpLease(DM90002): failed badly!4294844463 PID:a7e998be TID:67d30fda 0x87d4c9b8: ==>NdisMSetAttributesEx: Miniport 000549604294844582 PID:a7e998be TID:67d30fda 0x87d4c9b8: (+) STATUS PDCardGetWindow()4294844591 PID:a7e998be TID:67d30fda 0x87d4c9b8: In CPcmciaCardSocket* GetSocket()4294844602 PID:a7e998be TID:67d30fda 0x87d4c9b8: (+)CPcmciaCardSocket* ObjectBySocket4294844641 PID:a7e998be TID:67d30fda 0x87d4c9b8: (-)CPcmciaCardSocket* ObjectBySocket4294844653 PID:a7e998be TID:67d30fda 0x87d4c9b8: if( pSocket != NULL ) (-) STATUS PDCardGetWindow()4294844664 PID:a7e998be TID:67d30fda 0x87d4c9b8: (+) STATUS PDCardGetWindow()4294844779 PID:a7e998be TID:67d30fda 0x87d4c9b8: In CPcmciaCardSocket* GetSocket()4294844802 PID:a7e998be TID:67d30fda 0x87d4c9b8: (+)CPcmciaCardSocket* ObjectBySocket4294844827 PID:a7e998be TID:67d30fda 0x87d4c9b8: (-)CPcmciaCardSocket* ObjectBySocket4294844861 PID:a7e998be TID:67d30fda 0x87d4c9b8: if( pSocket != NULL ) (-) STATUS PDCardGetWindow()4294844879 PID:a7e998be TID:67d30fda 0x87d4c9b8: CPcmciaWindows::CardMapWindowPhysical:RsourceRequest(abcd0001,300,40 )fail!!!4294846228 PID:a7e998be TID:67d30fda 0x87d4c9b8: NDIS: ERROR-INdisGetPcmciaWindow failed 0xc000009a4294846239 PID:a7e998be TID:67d30fda 0x87d4c9b8: (+) STATUS PDCardGetWindow()4294846248 PID:a7e998be TID:67d30fda 0x87d4c9b8: In CPcmciaCardSocket* GetSocket()4294846257 PID:a7e998be TID:67d30fda 0x87d4c9b8: (+)CPcmciaCardSocket* ObjectBySocket4294846287 PID:a7e998be TID:67d30fda 0x87d4c9b8: (-)CPcmciaCardSocket* ObjectBySocket4294846297 PID:a7e998be TID:67d30fda 0x87d4c9b8: if( pSocket != NULL ) (-) STATUS PDCardGetWindow()4294846315 PID:a7e998be TID:67d30fda 0x87d4c9b8: ==>NdisMDeregisterAdapterShutdownHandler: Miniport 000549604294846327 PID:a7e998be TID:67d30fda 0x87d4c9b8: <==NdisMDeregisterAdapterShutdownHandler: Miniport 000549604294855129 PID:a7e998be TID:a7e99192 0x87eddd28: ONEEX:: InitializeRWLock: SUCCESS -- created Lock <01F9F7E0>4294855145 PID:a7e998be TID:a7e99192 0x87eddd28: ONEEX:: InitializeRWLock: SUCCESS -- created Lock <01F9F834>4294855161 PID:a7e998be TID:a7e99192 0x87eddd28: ONEEX:: InitializeRWLock: SUCCESS -- created Lock <01F9F8F0>4294855177 PID:a7e998be TID:a7e99192 0x87eddd28: ONEEX:: InitializeRWLock: SUCCESS -- created Lock <01F9F8A4>4294855215 PID:a7e998be TID:67d30fda 0x87d4c9b8: ***NDIS*** (b, 2078) 4294855223 PID:a7e998be TID:67d30fda 0x87d4c9b8: INIT FAILURE: Dequeueing the miniport from the driver block.4294855268 PID:a7e998be TID:67d30fda 0x87d4c9b8: ==>ndisDeQueueMiniportOnDriver, Miniport 00054960, MiniBlock 000534004294855280 PID:a7e998be TID:67d30fda 0x87d4c9b8: <==ndisDeQueueMiniportOnDriver: Miniport 00054960, MiniBlock 000534004294855293 PID:a7e998be TID:67d30fda 0x87d4c9b8: ***NDIS*** (b, 2105) 4294855301 PID:a7e998be TID:67d30fda 0x87d4c9b8: INIT FAILURE: Dereferencing the miniport block.4294855312 PID:a7e998be TID:67d30fda 0x87d4c9b8: ndisDereferenceMiniport:Miniport 00054960, Ref = 04294855330 PID:a7e998be TID:a7e99192 0x87eddd28: >>> Loading module rsaenh.dll at address 0x01E70000-0x01E99000Loaded 'E:\WINCE500\PBWORKSPACES\ZEUSZBIG\RELDIR\ZEUS_ARMV4I_DEBUG\RSAENH.DLL', no matching symbolic information found.4294857241 PID:a7e998be TID:67d30fda 0x87d4c9b8: ==>ndisMUnload: DriverObject 000547D04294857260 PID:a7e998be TID:67d30fda 0x87d4c9b8: ndisMUnload: MiniBlock 000534004294857274 PID:a7e998be TID:67d30fda 0x87d4c9b8: <==ndisMUnload: DriverObject 000547D0, MiniBlock 000534004294857898 PID:a7e998be TID:67d30fda 0x87d4c9b8: <<< Unloading module islp2nds.dll at address 0x036D0000-0x037F7000 (RW data at 0x01F0F000-0x01F97C4E)Unloaded symbols for 'E:\WINCE500\PBWORKSPACES\ZEUSZBIG\RELDIR\ZEUS_ARMV4I_DEBUG\ISLP2NDS.DLL'Is any body know why it happening???Thank you in advanceSwapnil Manglekar Tag: Multiple Monitor support in CE 6.0 Tag: 111709
  - 12
    - RTL 8139 Hello! I am using RTL 8139 In Wince 5.0. In Platformbuilder they are given the RTL 8139 driver On Catalog item. I was add that driver. I am doing the following entry in Project.reg ;RTL8139 Driver [HKEY_LOCAL_MACHINE\Comm\RTL8139] "DisplayName"="Realtek RTL 8139 based Fast Ethernet Driver" "Group"="NDIS" "ImagePath"="rtl8139.dll" [HKEY_LOCAL_MACHINE\Comm\RTL8139\Linkage] "Route"=multi_sz:"RTL81391" [HKEY_LOCAL_MACHINE\Comm\Tcpip\Linkage] "Bind"=multi_sz:"PPP","RTL81391" [HKEY_LOCAL_MACHINE\Comm\RTL81391\Parms] "BusNumber"=dword:0 "BusType"=dword:5 "IoBaseAddress"=dword:e000 "Transceiver"=dword:3 "CardType"=dword:1 "SysIntr"=dword:1f [HKEY_LOCAL_MACHINE\Comm\PCI\RTL81391\Parms\Tcpip] "EnableDHCP"=dword:1 "DefaultGateway"="" "UseZeroBroadcast"=dword:0 "IpAddress"="0.0.0.0" "Subnetmask"="0.0.0.0" But I was tried to ping other Pc It shows Me the following message transmit failed,error code 11010. Suppose this means my driver is not supported Then pls suggest proper driver for RTL 8139 or give me the changes of the driver files. Thnak you. Tag: Multiple Monitor support in CE 6.0 Tag: 111707
  - 13
    - How to assign a Mouted Volume Name Hi, I am running WinCE 5.0 with a NAND flash which have 2 partition for user to use. And now I just want to name them as the 2 partitions as "Apple" and "Orange" However, I don't know how should I set the registry. If I using the following registry, I will only get the name: "Apple" and "Apple2" by default which same as the help file say: "Folder" Indicates the base name to use when a volume is mounted on this store. Default value is "LOC_STORE_DEFAULT_FOLDER". If the requested name is already in use, then a number is concatenated to the base name and increased each time. So is there any API I can rename the partition's folder name? Or there are some registry setting I can make use of? Thanks a lot for any help~ [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\NandFlash] "Dll"="nandfcd.dll" "Order"=dword:0 "Prefix"="DSK" "Profile"="FlashDisk" "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" "FriendlyName"="NAND FLASH Driver" ; These can overridden in the particular named profile ; Various Flags ; AutoFormat - Formats the store automatically ; AutoPart - Automatically partitions the store with largest creatable partition ; AutoMount - Automatically Mounts each detected partition (if FSD driver is available) ; MountFlags (deprecated in WinCE 5.0)- Flags on how the partition is mounted ; 1 - Hidden file system ; 2 - May contain system registry ; 4 - Mount as root of file system, "\" ; 8 - Hide ROM when mounting FS root ; 10 - Mount filesystem as an external ROM filesystem ; 20 - Treat all files and subdirectories as system files ; The following registry values replace the MountFlags: ; MountHidden - Hidden file system (same as MountFlags=1) ; MountAsBootable - May contain system registry (same as MountFlags=2) ; MountAsRoot - Mount as root of file system, "\" (same as MountFlags=4) ; MountAsROM - Mount as an external ROM filesystem (same as MountFlags=10) ; MountSystem - Treat all files and subdirectories as system files (same as MountFlags=20) [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\FlashDisk] "Name"="NAND FLASH" "DefaultFileSystem"="FATFS" "AutoMount"=dword:1 ; Auto part and format disk if no partitions are present. ; WARNING! This can cause long boot times when encountering a fresh disk. "AutoPart"=dword:1 "AutoFormat"=dword:1 ; Default values for fatfs. These can be overridden per profile ; Flags DWORD See available flags below ; Valid Bits for Flags registry value ;FATFS_UPDATE_ACCESS 0x00000001 update access times if set ;FATFS_DISABLE_LOG 0x00000002 disable event logging if set ;FATFS_DISABLE_AUTOSCAN 0x00000004 disable automatic ScanVolume() ;FATFS_VERIFY_WRITES 0x00000008 verify all writes (as opposed to a handful) ;FATFS_ENABLE_BACKUP_FAT 0x00000010 add a backup FAT to all formats ;FATFS_FORCE_WRITETHROUGH 0x00000020 Force fat to be always writethrough ;FATFS_DISABLE_AUTOFORMAT 0x00000040 disable automatic formatting of unformatted volumes ;FATFS_WFWS_NOWRITETHRU 0x00010000 disable writethrough on WriteFileWithSeek API, ; improve memory-mapped file performance ;FATFS_DISABLE_FORMAT 0x00020000 disable format ;FATFS_TRANS_DATA 0x00040000 transact data on a write (i.e. clone cluster on every write) ;FATFS_TFAT_USECLUS1 0x00080000 Use cluster 1 entry in FAT table for TFAT transaction. ; By default, TFAT uses the NOF field of the boot sector ;FATFS_DISABLE_TFAT_REDIR 0x00100000 Indicates to disable redirect the root directory ; to another hidden directory for FAT12 or 16, ; since root dir isn't transacted in those cases ;FATFS_TFAT_ALWAYS 0x00200000 Always mark transaction status, even only one sector in FAT is changed ;FATFS_FORCE_TFAT 0x00400000 Force TFAT transactioning even if volume isn't formatted as TFAT ; NOTES: common.reg default is "Flags"=dword:00000064 [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\FlashDisk\FATFS] ; Override common setting to enable automatic formatting of unformatted volumes "Folder"="Apple" "Flags"=dword:00000024 Tag: Multiple Monitor support in CE 6.0 Tag: 111705
  - 14
    - Hide my own files Hi, I need to hide my customized gina files away from the user. Basically, the gina file resides in the \windows folder. I can write file system filter to hide files in the external storage device but not the persistant store. How can I go about hiding the files ? Tag: Multiple Monitor support in CE 6.0 Tag: 111702
  - 15
    - WinCE 6.0 questions Hello to all of you I have several questions about Windows CE 6.0. So if you would know the answer, please help. 1. In WinCE 5.0, a dll file loaded into memory needs 64 kB, even if it is smaller. So if I need to load more small dlls, it consumes too much virtual memory space. In WinCE 6.0 this problem is gone, right? Can anybody explain why? I know new WinCE 6.0 memory model but are there any changes in rules of dll loading? 2. In Platform builder in WinCE 5.0 I can see rough OS image size. Is it possible to see this value in Visual Studio with WinCE 6.0 plugin? 3. I need to remove some files from my OS image, for smaller size. I would like to remove windowsce.bmp logo file, for example. Are there any way, how to do it in some project files (project.bib, ...)? 4. I need to add some dependecies in my BSP catalog. For example, I have I2C driver and drivers for keyboard and display attached to this BUS. If I add the keyboard driver, I2C driver must be added automaticaly. It can by done by setting some catalog item values, it's easy. But are there any other way? If I try to remove I2C driver, it's not naturally possible. IDE will say to remove (own, i.e. I2C driver) value, which is set by other dependent items. But I think it would be better to display the list of names of all dependent items, which this value set. Is it possible to do it? 5. And finally, in *.db file I can define both database structure and some initial content (for example some names or phone numbers), right? Thanks to everybody, who will answer for some questions! George H. Tag: Multiple Monitor support in CE 6.0 Tag: 111699
  - 16
    - view list of dll in nand.bin file Hello all, Am working on windows mobile I would like to see the list of all the dll in the NAND.bin file. I have tried with viewbin -t nand.bin and viewbin -d nand.bin.it is not giving the list of dlls. Can you please tell me what is the command to see list of dll in nand.bin file? Thanks in advance -senthil Tag: Multiple Monitor support in CE 6.0 Tag: 111693
  - 17
    - What feature is Needed to support GetIpForwardTable function? I added IP Helper API feature to my ce 5.0 ,but GetIpForwardTable function always return ERROR_NOT_SUPPORTED when I call it. Why? Do I need add other features to my workspace? Tag: Multiple Monitor support in CE 6.0 Tag: 111685
  - 18
    - .NET compact frmework 2.0 in catalog Hi: Have any one using Platform builder (Windows CE 5.0) and with .NET compact framework 2.0? How can I added the .NET compact framework 2.0 into platform builder's catalog, just like the version 1.0 was in the catalog. So new platform project, I could simple add it into the workspace! I need some help about it. Thanks Lu Tag: Multiple Monitor support in CE 6.0 Tag: 111681
  - 19
    - PB 6.0 Sysgen and 6.0 Footprint Hi, we are starting to use the VS2005 with PB 6.0 Plugin and noticed the following things: 1)is it possible that the sysgen build time takes longer in 6.0 than a similar 5.0 image? 2)The 6.0 Footprint is bigger than a similar 5.0 Image Best regards -- Javier Grijalba www.contendosystems.com Embedded Systems J.Grijalba at Contendosystems dot com Tag: Multiple Monitor support in CE 6.0 Tag: 111677
  - 20
    - ANN: Road Map for Windows Embedded Microsoft Charts Its Road Map for Windows Embedded Business <URL:http://www.microsoft.com/presspass/press/2008/apr08/04-15RoadMapEmbeddedPR.mspx> Windows CE => Windows Embedded Compact. -- Thomas Scheidegger - 'NETMaster' http://www.cetus-links.org/oo_dotnet.html - http://dnetmaster.net/ Tag: Multiple Monitor support in CE 6.0 Tag: 111672
  - 21
    - PB5.0: ActiveSync & USB problem Hi, platform: PXA270 (Toradex Colibri) i build WinCe 5.0 with USB Function->Serial, RNDIS, ActiveSync support, but my WinCE 5.0 image says: "Port Not Aviable" "Cannot connect to PC. Stop any programs that may be using a connection, and try again...." when i thy to connect USB plug. Could you help me in this problem? Tag: Multiple Monitor support in CE 6.0 Tag: 111669
  - 22
    - WinCE 6.0 stress test problem caused by Software-based Input Panel I'm running into a WinCE 6.0 stress test problem caused by Software- based Input Panel (SIP) component. The test environment is: - Windows XP with SP2 - Visual Studio 2005 - Visual Studio 2005 SP1 - Windows Embedded CE 6.0 Platform Builder - Windows Embedded CE 6.0 SP1 (required if PB 6.0 Tools have been installed) - Windows Embedded CE 6.0 R2 - Windows Embedded CE 6.0 Cumulative Product Update Rollup 12/31/2007 - Windows Embedded CE 6.0 Monthly Update (January ~ March 2008) The workspace configuration is: <FeatureCollection Name="AnchoredFeatures" EnforceUniqueItems="True"> <Feature Name="Item" CatalogItemId="Item:MS:sysgen_msim" /> <Feature Name="Item" CatalogItemId="Item:MS:sysgen_shell" /> <Feature Name="Item" CatalogItemId="Item:MS:sysgen_standardshell" / > <Feature Name="Item" CatalogItemId="Item:MS:sysgen_touch" /> <Feature Name="Item" CatalogItemId="Item:MS:sysgen_ddraw" /> <Feature Name="Item" CatalogItemId="Item:MS:sysgen_wcetk" /> <Feature Name="Item" CatalogItemId="Item:MS:sysgen_coreloc" /> </FeatureCollection> System always gets a "Data Abort" exception at the point of ~20 minutes running. The call stack of the exception is below. K.COREDLL!wcslen + 4 bytes GWES!GweMemory_t::NewDuplicateString() line 231 + 8 bytes GWES!ListBox::CreateCopyOfString() line 1211 + 16 bytes GWES!ListBox::InsertItem() line 1358 + 16 bytes GWES!ListBox::ListWndProc() line 6427 GWES!CWindow::CallWindowProcW_I(CePtr_t<long (__cdecl*)(HWND__ *,unsigned int,unsigned int,long)> {...}, SendMsgEntry_t * 0xc0237cf8) line 2448 + 24 bytes GWES!MsgQueue::DispatchReceivedMsg() line 2917 + 48 bytes GWES!MsgQueue::GetEvent(unsigned int 0x8822a450, tagMSG * 0x8824cffc) line 3133 GWES!MsgQueue::SendMessageWithOptions(unsigned int 0x00000000) line 3829 + 36 bytes GWES!MsgQueue::SendMessageW_I() line 5012 + 32 bytes GWES!MsgQueue::SendMessageW_E() line 4950 COREDLL!SendMessageW() line 2916 SOFTKB!SIP_IOControl(unsigned char * 0x00000000, unsigned long 0x00090000, unsigned long * 0x00000009) line 211 UDEVICE!UserDriver::Ioctl() line 456 + 64 bytes UDEVICE!00011c48() KERNEL!NKHandleCall() line 1950 + 12 bytes K.COREDLL!DirectHandleCall() line 76 K.COREDLL!xxx_DeviceIoControl(void * 0x00000000, unsigned long 0x00000000, unsigned long * 0x00000000, _OVERLAPPED * 0x00000000) line 33 DEVMGR!CReflector::SendIoControl(void * 0x00000000, unsigned long 0x00000000, unsigned long * 0x00000000) line 304 DEVMGR!CFileFolder::Control(void * 0x00000000, unsigned long 0x00000000, unsigned long * 0x00000000) line 930 DEVMGR!Reflector_Control(void * 0x00000000, unsigned long 0x00000000, unsigned long * 0x00000000) line 1008 DEVMGR!DM_DevDeviceIoControl(void * 0x00000000, unsigned long 0x00000006, unsigned long * 0xd1fbf89c, _OVERLAPPED * 0x00000000) line 453 + 52 bytes COREDLL!xxx_DeviceIoControl(void * 0x88230a5c, unsigned long 0xd2070000, unsigned long * 0xd2060000, _OVERLAPPED * 0xd22dfcc8) line 33 COREDLL!SipImmSetActiveContextNotify(HKL__ * 0x8c2f0138) line 589 COREDLL!ImmSetActiveContext(struct HWND__ *,unsigned long,int) + 528 bytes K.COREDLL!xxx_PerformCallBack4() line 293 K.COREDLL!ImmSetActiveContextInOwnerProcess() line 570 + 20 bytes K.COREDLL!ImmSetActiveContext(struct HWND__ *,unsigned long,int) + 76 bytes GWES!ImmThunk_ImmSetActiveContext() line 217 GWES!MsgQueue::PreprocessReceivedMsg(long 0x00000000, bool * 0xd1fbfa65) line 1357 GWES!MsgQueue::SendMessageWithOptions(unsigned int 0x00000000) line 3753 GWES!MsgQueue::SetUicFocus() line 1041 GWES!SetFocus_I() line 1696 + 16 bytes COREDLL!DefWindowProcW() line 3133 CLIENTSIDE!000193dc() K.COREDLL!xxx_PerformCallBack4() line 293 GWES!WindowProcCallback(unsigned int 0xd1fbfc30, long 0xc00a8694, bool * 0x03660002) line 2312 + 20 bytes GWES!CWindow::CallWindowProcW_I(CePtr_t<long (__cdecl*)(HWND__ *,unsigned int,unsigned int,long)> {...}, SendMsgEntry_t * 0x00018f84) line 2473 + 44 bytes GWES!MsgQueue::SendMessageWithOptions(unsigned int 0x00000000) line 3770 + 44 bytes GWES!MsgQueue::SetUicActiveWindow() line 708 GWES!MsgQueue::PreprocessReceivedMsg(long 0x000000e0, bool * 0xd1fbfd64) line 1342 GWES!MsgQueue::GetEvent(unsigned int 0xd1fbfd68, tagMSG * 0x700232ac) line 3191 GWES!MsgQueue::GetMessageW_I() line 5331 COREDLL!GetMessageW() line 2927 CLIENTSIDE!0001959c() COREDLL!ThreadBaseFunc() line 1097 Looking at the call stack, we can find that the exception has something to do with SIP. When I remove the catalog item "Software- based Input Panel (SIP) --> SIP for Small Screens (SYSGEN_MSIM)" from the run-time image, system can pass the stress test, running over 800 minutes with 99% Test Pass Percentage. Does anyone experience this problem? Any comments will be appreciated. Regards, Shawn Tag: Multiple Monitor support in CE 6.0 Tag: 111667
  - 23
    - develop a PCI driver for INTEL IXDP 425 with winCE 4.2 using eVC hi all can anyone give me some clues where to start? I need a minimal demo project to create a PCI driver . my debugger is supported with ethernet basd debugger connected to the Embedded visual c++ (win CE 4.2) every time I write to the PCI controll registers the debugger hangs. can I read all the registers of the PCI to try and understand the valid configuration of PCI to support the debugger??? tX ori Tag: Multiple Monitor support in CE 6.0 Tag: 111659
  - 24
    - Duplicatehandle Hi, I have a pxa270 BSP that was probably ported from Wince5 to CE6.0. The GPIO driver allows me to set interrupts on a GPIO pin. But it is not working. After investigating I found that the InterruptInitialize() in the driver failed with code 87. I found the following article and implemented this : http://groups.google.com/group/microsoft.public.windowsce.platbuilder/browse_thread/thread/63a4495704f113af/e11f31bfa5be37c2?lnk=st&q=duplicatehandle+wince#e11f31bfa5be37c2 Now the InterruptInitialize() succeeds (after duplicating the event handle that was passed from the application), but I still donot see any interrupts. I use WaitForSingleObject() on the ORIGINAL event-handle, is this the problem ? Should I be waiting on the duplicated handle ? in that case I would need to pass it back to the app first. That makes me wonder if it would be better to let the Driver instantiate the event in the first place, instead of passing it twice... Please advise.... Greetings, Rob Tag: Multiple Monitor support in CE 6.0 Tag: 111657
  - 25
    - SDIO and SD Bus driver .. Hi I got a problem about an IO card.(in WM6) The IO card initiate success with SD bus driver(The driver's dir is SDBusDriver), and work correctly. The sd bus driver doesnt support SDHC. But When I replace the SD bus driver that get from \WM606\PUBLIC\COMMON\OAK\DRIVERS\SDCARD\SDBUS (it supports SDHC). It initizte fail. I check debug message. The all initializtion commands are successful, but fail in loading client driver It fail in the statement --> m_pDriverFolder->LoadDevice(); the messages are in the following: ---------------------------------------------- SDHSlotOptionHandler - called - SetSlotInterface : Clock Setting: 25000000 SDHSlotOptionHandler - called - SetSlotInterface : setting for 4 bit mode SDClockOn - Requested Rate: 25000000, Setting clock rate to 20000000 Hz CertVerify: StellusSDIO.dll trust = 2 Prefetch Abort: Thread=8b9c1000 Proc=885613a0 'device.exe' AKY=00000005 PC=00000000(???+0x00000000) RA=01235444(stellussdio.dll+0x00005444) BVA=00000000 FSR=000004f0 RaiseException: Thread=8b9c1000 Proc=885613a0 'device.exe' AKY=00000005 PC=03f6c3c4(coredll.dll+0x0001e3c4) RA=882086a4(NK.EXE+0x000086a4) BVA=00000001 FSR=00000001 ------------------------------------------------------ Is it the new sd bus driver's problem?? BR Jack Tag: Multiple Monitor support in CE 6.0 Tag: 111651

I am curious about multiple monitor support in CE 6.0 and wonder if it has
improved from CE 5.0. PB 5.0 on-line help states "The ATI Rage XL Expert 98
display adapter** is the only board with a multiple monitor capable driver
that ships with Windows CE."

Is there any 3rd party support for multiple monitors?

Thanks

Top