Minimum Processor Speed

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - [Q]: Managers Hi all, This query is related to Audio driver based on Unified Audio Model. 1. What does the "Audio Device Manager" do ? 2. What does the "Audio compression Manager" do ? The msdn documentation say least about these components wrt its functionality. regards sajid Tag: Minimum Processor Speed Tag: 57561
  - 2
    - To check com16550 and ser16550 hi, What should do in order to check the code of COM16550 and SER16550 .... i expect that this post won't be neglected ... Thanking you Tag: Minimum Processor Speed Tag: 57559
  - 3
    - Is there a BSP for PXA25x on WinCE 5.0 ? I installed WinCE5.0 evaluation version, it seemed that no BSP for PXA250/255, Can I find it somewhere in the internet? thank you! Tag: Minimum Processor Speed Tag: 57537
  - 4
    - Simplified Chinese Issue Dear experts, 1. When I use Platform Builder 5.0 to add "International>Locale Specific Support>Chinese(Simplified)>Agfa AC3 Font Compression" to my OS design, the entry "International>Locale Specific Support>Korean>Agfa AC3 Font Compression" will be inserted in OSDesignView. Why is "Korean" catalog, not Chinese (Simplified) catalog? There isn't such problem when I use Platform Builder 4.2. 2. When I use MSPY in WinCE 4.2, the font in candidate bar is too small for our specified application. How can we adjust the font size? 3. Where can I get the source codes of MSPY? Thanks, Arthur Tag: Minimum Processor Speed Tag: 57535
  - 5
    - CE 5.0 Kernel question Hi all, I wrote some function in C:\WINCE420 \PLATFORM\CEPC\KERNEL\HAL\oemioctl.c in CE 4.2. But I can not find the "oemioctl.c" in CE 5.0, where can I put my code if I want to modify the kernel? Thanks, Bryan. Tag: Minimum Processor Speed Tag: 57534
  - 6
    - NdisQueryPacket doesn't compile Hi I couldn't compile my NDIS driver file(.C) if I include NdisQueryPacket function in EVC4. Its a macro defined under ndis.h Does any one know abut the compiler flags i need to use or any header files?? Thanx Tag: Minimum Processor Speed Tag: 57529
  - 7
    - How emulate re-insert PCMCIA card on platform CE.NET 4.1 Hi! I have video grabber PCMCIA card and factory driver. After install driver for this card , i can't use card. Only after re-insert or Hard-reset card working ok. How emulate re-insert card....without reset or remove and insert card. I use eVC++ application for communication with this card. Thank you!!!! Tag: Minimum Processor Speed Tag: 57527
  - 8
    - MapPtrToProcess vs MapCallerPtr Hi, I writed, a long time ago, a CE 2.11 stream interface driver. today, i use source code and compile it with PB 5.0. My driver work fine but, On each IOCTRL call , the driver call MapPtrToProcess. I use it to map the input parameter. This parameter is a pointer to a structure. I've see in the documentation that the MapPtrToProcess is deprecated. Use MapCallerPtr function instead. But the MapCallerPtr is use to validate parameter, not to map adress into the caller process. Do i must use MapPrtToProcess again? Thank you Tag: Minimum Processor Speed Tag: 57525
  - 9
    - CE 5.0 - Export Wizard Bug? I've put together a BSP that builds flawlessly. Now I'm trying to use the Export Wizard to create an installable .msi file that I can distrubute but have hit a roadblock. I'm getting a Platform Builder error message that says: "The Export Wizard could not build the .msi file. Be sure all files and directories that you include are valid and then run the Export Wizard again." I've scaled the export task back to just the .cec file. I'm not adding any extra files or directories. It would be nice to have some clues about what files it thinks are invalid or missing. The OS design I'm testing is built upon the BSP I'm trying to export. The build system obviously thinks everything is OK because the OS image builds without errors and works on the target hardware. I've tried going through the .cec file line by line but can't find anything that appears to be invalid. What gives? Tag: Minimum Processor Speed Tag: 57519
  - 10
    - CE 5.0: Remove non-platform environment variable. Hi, I created a new platform based on CEPC and Internet Appliance. When deleting the "TI PC Card" item from the platform, there's a dlg stating "Remove non-platform environment variable: BSP_PCCARD_TIPCCARD. How do I remove the non-platform variable? Thanks. Peter L. Tag: Minimum Processor Speed Tag: 57518
  - 11
    - Aygshell with emulator Is it possible to use the aygshell APIs with the PB emulator? I am trying to use APIs like SHInitDialog() that require aygshell.lib, but I can't find aygshell.lib in my x86 emulator libraries. The catalog shows SYSGEN_AYGSHELL=1. What do I need to do to get an x86 aygshell.lib? Tag: Minimum Processor Speed Tag: 57513
  - 12
    - HTML Scripting for ActiveX What components do I need? I currently have a platform, which appart from this 'small' problem appears to work. I have an application which exports a 'disp' interface, which I wish to drive from a web page, also residing on the CE platform (x86based). I have included the scripting languages in both 'Internet Client Services' & 'WebServer HTTPD'. On opening my web page, the javascript for the button rollover works, however I am unable to send my message to the activeX object. The current message from IE I assume to be an HRESULT of 0x80070002. Can someone point me in the correct direction, or is this another symptom of the dreaded 'not able to run a COM server out of process'? Tag: Minimum Processor Speed Tag: 57508
  - 13
    - Unresolved Symbol ActivateDevice Hello experts, I roughly completed an OAL for my xscale board. Now when I tried to add the driver and the applications in, the function call ActivateDevice() does not get resolved by the linker. Could any of you tell me how to solve the problem? I have the coredll in the libary list. Thanks, Nguyen Tag: Minimum Processor Speed Tag: 57501
  - 14
    - Image Size in IXDP425 Hi every body I built an Internet Appliance platform in IXDP425 with these soft wares: 1-Media player with it's coded. 2-RDP 3-Internet explorer My platform was hive based registry Its size was more than 14 MB. So I decided to remove RDP and change it to Ram based registry, although I needed both of them but after doing these changes its size became 13.7 MB and again it didn't fit on IXDP425 flash memory. My question is how I can able to reduce the size of my image? How can I able to compress the file such as codecs, â?¦? Some of components don't have a check box for compression. Please help me. Tag: Minimum Processor Speed Tag: 57493
  - 15
    - customizing run-time image to smartphone Hi, I have generated a custom OS run-time emulator image using PB 5.0 eval. I want to use it in smartphone skin. Though, the skin loads and screen also appears (Thanks to Valter), still the operation on the emulator is not like the ones provided by smartphone 2003 emulator. Is there a way i can customize the OS to be used in smartphone scenario ? I mean with in mobile skin it is absurd to use mouse pointer over lcd. Everything should be operated using the two soft keys below LCD of mobile phone (emulator skin). Thanks Tag: Minimum Processor Speed Tag: 57492
  - 16
    - Low Resolution On Thin Client Monitor i have successfully installed Windows CE OS image on the thin client but the RESOLUTION APPEARS very low. i have tried adjusting it but could not. the display driver that i have used is FLAT VGA. the client screen does not show any supported mode when i run vesatest.exe. kindly help me Tag: Minimum Processor Speed Tag: 57488
  - 17
    - wince.net 4.2 language support Hi As part of a trial we are wanting to use wince.net 4.2 based terminals using different languages. I've tried changing the set up language under regional settings but this doesn't appear to be available as a changeable option. Our Current image is build for UK(English), if I want to chnage the language supported to say German...is this an option I can select and change on the fly or must I have a different image for each different language we want to support. Regards Tag: Minimum Processor Speed Tag: 57484
  - 18
    - EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Hi: I am using SMSCLAN91C111, my hardware design is based on accelent IDP. I am using Lubbock BSP to port software on my board. I am in porting of Eboot. (91c96 code of Lubbock to 91c111), i am getting an error message from my SMSC Controller while transmitting ARP -- LateCollison, Tx Underun, Lost Carrier. Very rarely i am able to transmit, but during that time i am not able to receive any frames, i polled the register of the SMSC (Interrupt Status Register -RVC_INT bit), it's not set. When i tried to capture packets using a "Ethereal" i am not getting any packets. Even i tried with a Cross-Over cable, independent HUB. When i enable DHCP, eboot always fails to initialize the DHCP. all the above happend only in Static IP. What could be the problem here? I am not able to find any solution, pls help me . Thanks & regds, Peter Tag: Minimum Processor Speed Tag: 57482
  - 19
    - Nk.bin not executing in emulator Hi, I created a custom run-time image file, but its not executing in the emulator. The emulator window appears but the screen is always black. I am executing the following statement from command line - start "" "C:\Program Files\Windows CE Tools\Common\Platman\bin\Emulator_500.exe" /CEImage "C:\WINCE500\PBWorkspaces\myworkspace\RelDir\Emulator_x86_Debug\NK.bin" /ethernet virtualswitch /MemorySize 48 There is no change even when i use a skin. Please help. Tag: Minimum Processor Speed Tag: 57479
  - 20
    - About the warning information about LNK 4209 Dear all: I am migrating a driver from the WinCE 4.2 to WinCE 5.0, but there is a fatal warning when I build the driver in the WinCE 5.0 env? It is quite strange and any one who can give me some help? wince.obj : warning LNK4209: debugging information corrupt; recompile module; linking object as if no debug info those compile option in the makefile: CFLAGS: -Zi -Gy -Ox -Os -GF ... DFlags:-debug -debugtype:cv Tag: Minimum Processor Speed Tag: 57478
  - 21
    - hi Actually i meant to ask what is the diffference b/t 890_serial,com_card,com_mdd,com_mdd2,com16550,isr16550,ser_card,ser_card2,ser16550 in the oak/drivers/serial/ folder... Tag: Minimum Processor Speed Tag: 57476
  - 22
    - This is not a .BIN file FF FF FF FF FF FF FF Hi, somehow I managed to run the bootloader without errors. but now it is giving error like as follows...... previously the errors was data checksum failure and then Received out of sequence block 3925869566 Expected block 0 now that errors are disappeared and here is my debug output.... Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built Mar 13 2003 23:05:42 System ready! Preparing for download... Sending boot request... Waiting for boot ack... received non-download packet type Sending boot request... Waiting for boot ack... received non-download packet type Sending boot request... Waiting for boot ack... received non-download packet type Sending boot request... Waiting for boot ack... Received boot ack Received boot request ack... starting download This is not a .BIN file FF FF FF FF FF FF FF what is this problem? I have checked the nk.bin image, and it starts with B000FFonly..... what could be the problem? I am not doing anything with the data buffer.... the problem of datachecksum and all were some problem other than that..(relocation of code...) regards Sujith Tag: Minimum Processor Speed Tag: 57475
  - 23
    - Private Code Tree Hi, If I want to include my version information in a build, can I modify GetVersionEx function in the COREOS directory in the private tree? I am planning to modify the szCSDVersion member of the OSVERSIONINFO. I'm using CE .Net 4.2. I am not sure about this but I think the licensing might be a problem, is that correct? Thanks a lot, Tag: Minimum Processor Speed Tag: 57460
  - 24
    - Where is it stuck on ARM Hello Experts, I was able to get the kernel to this point, where is it stuck and what are the possible issues? How do I fix this? It was able to pass this state before. Windows CE Kernel for ARM Built on Mar 13 2003 at 22:43:27 ProcessorType=0200 Revision=4 sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 80071140 OEMInit() Turning on Branch Target Buffer Enable CP0 Access Initialize Timer Interrupt Done OEMInit() Booting Windows CE version 4.20 for (ARM) &pTOC = 8007943c, pTOC = 801fac14, pTOC->ulRamFree = 807ab000, MemForPT = 000000 00 Booting kernel with existing memory configuration: Memory Sections: [0] : start: 807ac000, extension: 00001000, length: 00853000 Sp=ffffc7cc ARMInit done. Windows CE KernelInit Updated eptr->e32_vsize to = 000ad000 Thanks, Nguyen Tag: Minimum Processor Speed Tag: 57458
  - 25
    - Unable to configure CE.NET for more than 3 serial ports. Hi, I have a hardware which has six serial ports and I was able to use this and configure it with the CE 3.0. But in CE.NET I am not able to use more than 3 serial ports. I have already disabled the COM1 debug port by modifying the Debug.C file. It seems the trick is how to use the port base addresses found at the start of platform.reg file. I am really not sure how do those addresses work. My hardware settings are COM1 - IRQ4 - SysIntr 14 - 0x3F8 ( Works ) COM2 - IRQ3 - SysIntr 13 - 0x2F8 ( Works ) COM3 - IRQ9 - SysIntr 19 - 0x3E8 ( Works ) COM4 - IRQ6 - SysIntr 16 - 0x2E8 ( Fails !! ) COM5 - IRQ7 - SysIntr 17 - 0x280 ( Fails !! ) COM6 - IRQ14 - SysIntr 24 - 0x2C0( Fails !! ) I checled in the driver and it seems to fail when the InterruptInitialize function in the StartDispatchThread is called for COM4,COM5 and COM6. Any help with what could be wrong will be highly appreciated. Thanks, Bhavin Tag: Minimum Processor Speed Tag: 57457
- Next
  - 1
    - adding XML support (without new OS image) We already have our systems deployed and running CE.NET 4.1 out there, but during the time the CE.NET OS was built without XML support. We have an CE application it would run on the new OS image (that I built with XML support, along with ATL). But when tried to run on the original OS image, it will say it is "not a valid CE application". I have tried to copy EVERY DLL that is new to the new OS (msxml3.dll, etc) over to the same directory of our application, but it doesn't help any. Is there anyway to make the old OS image support XML without deploying a whole new OS image. Or find out precisely what is our application is looking for a specific setting or DLL. I have already ran dumpbin but can't find anything specific, my guess is the msxml3.dll needs some other things. Also I have noticed the coredll.dll is different sizes on both images. Tag: Minimum Processor Speed Tag: 57456
  - 2
    - WMV plays choppy. MPG plays fine Hi all. I searched and couldn't come up with something that addressed my issue. so here it is: We are running WinCE 4.20 (all latest QFEs installed), and we're trying to make a multimedia build. However we're having some real issues trying to play WMV files. They play nicely for about a minute, but suddenly they start freezing-resuming, freezing-resuming. MPG and AVI files play absolutely fine, only WMV files seem to display this behavior. We're on a custom x86 board with 256 MB ram, running at 300 mhz. Using this hardware with XP embedded WMV files work fine, but when on CE 4.20 it just doesn't. Any clues? Tag: Minimum Processor Speed Tag: 57455
  - 3
    - Including a CA root certificate in the Platform Builder image Hi, How do I include an additional CA root certificate (i.e. our own) in the root certificate store for SSL encryption purposes. If fact, I might like to remove the default ones that come with the build (Verisign etc). I know this can be done through the control panel and also presumably through an API, but I'd like to include the certificates in the image at build time through Platform Builder. I have looked for FAQs etc, but can't find anything.... TIA, - John Tag: Minimum Processor Speed Tag: 57453
  - 4
    - New Platform Wizard Base Configurations Is there a way of adding a new "base configuration" to the New Platform wizard in CEPB 4.2. I see that each base configuration is an XML file in the \Program Files\Windows CE Platform Builder\4.20\cepb\bin\IDE\Wizards. Is there some way that anyone knows, other than editing one of these files, to set up a base configuration to be re-used when making new platforms? Andrew. Tag: Minimum Processor Speed Tag: 57450
  - 5
    - Kernel Debugger Hi, how do I build the WINCEROOT\\PRIVATE\WINCEOS\COREOS\NK\KERNEL\ARM\ directory wit my current settings. I want to debug the KernelStart code, in the armtrap.s file.... I have a routine in assembly, which initializes and write data to the UART 0 / 1 I tried build -c but it fails with some errors. from which directory I can give a build? Regards Sujith Tag: Minimum Processor Speed Tag: 57443
  - 6
    - Generating run-time image file for smartphone 2003 emulator Hi, I am using Windows CE 5.0 (eval) platform builder and generated a custom OS image file for emulator x86 BSP. And using this image file (Nk.bin) as an input to smartphone 2003 emulator. The skin appears but nothing appears on the screen, and no error appears!! Am I doing something, which is not permissible ? Is there anyway i can use this smartphone skin (supplied with smartphone 2003 SDK) to use the custom OS i generated with platform builder 5.0 ? Actually i want to test mpeg-4 streaming with the emulator, for which i have included codecs using PB. If the above is not possible, is there a way to achieve this ? Thanks Tag: Minimum Processor Speed Tag: 57433
  - 7
    - How to port BSP from 4.2 to 5.0 ? Hi, Our platform uses Samsung 2410 CPU. We already have a .Net 4.2 BSP that is working on my platform. Now I try to build a .net 5.0 os image and run it on my platoform. However, I found it will be a big job if I must modify the codes of Samsung 5.0 BSP by extracting H/W-dependent codes from our 4.2 BSP . It is because the most directories and files names are different in .Net 5.0. In addition, bsp is centralized in .Net 4.2 , while BSP is distributed in .Net 5.0. Is there a easier way to run a .Net 5.0 OS on my platform? Thanks. Yu. Tag: Minimum Processor Speed Tag: 57431
  - 8
    - PCI Driver ISR configuration. Hi to all, I've developed my own PCI driver for our own PCI board (Motor Controller), this board is plugged into an Advantech VIA Eden CEPC Board with our own WinCE 4.2 image. The image is standalone and boots with biosloader (with no KITL transport included, only TCP/IP transport and Manual Server). Now we are developing the application (with eVC++ 4.0 SP2) that uses the driver to manage the PCI board, we are debugging the app conecting with the target through TCP/IP transport and Manual Server (Using a telnet session to execute the command line). We have the following problem: sometimes, when I call the IOCTL that installs the ISR for my PCI driver, the TCP/IP conection is lost. Using PCIENUM utility I saw that the problem only happens when the IRQ allocated for my PCI board is the same as the one used by the ethernet board. So, my question is: Is the problen happening due to a wrong ISR instalation? Or a wrong call to LoadIntChainHandler?(Following is my driver source code por IRQ allocation). ///////////////// SNIP ////////////////////////////////////////////////////// DDKISRINFO IsrInfo; GIISR_INFO DataIsr HANDLE hIsr; HANDLE hevent; HANDLE hthread; IsrInfo.cbSize = sizeof(IsrInfo); DDKReg_GetIsrInfo(hRegEntry, &IsrInfo); hIsr = LoadIntChainHandler(IsrInfo.szIsrDll,IsrInfo.szIsrHandler,(BYTE)IsrInfo.dwIrq); DataIsr.SysIntr = IsrInfo.dwSysintr; // Stuff loading GIISR the rest of information in DataIsr.... KernelLibIoControl(hIsr, IOCTL_GIISR_INFO, &DataIsr, sizeof(DataIsr), NULL, 0, &kioreturned); hevent = CreateEvent(NULL, FALSE, FALSE, NULL); InterruptDisable(DataIsr.SysIntr); InterruptInitialize(DataIsr.SysIntr, hevent, NULL, NULL); hthread = CreateThread(NULL,0,Driver_IST,&hevent,0,NULL); CeSetThreadPriority(DevData.hThread, 0); ////// IST Sorce Code: //////// DWORD WINAPI Driver_IST(LPVOID lpArg) { HANDLE phev; DWORD intreg; phev = *(HANDLE *)lpArg; while(!Global_Abort) { WaitForSingleObject(phev, INFINITE); if(!Global_Abort) { SetEvent(ThDevData->hAppEvent); InterruptDone(ThDevData->DatosIsr.SysIntr); } } return 0; } //////////////// END SNIP ////////////////////////////////////////////// Any suggestion will be appreciated. Thanks in advance for your help. Best Regards, Juan. Tag: Minimum Processor Speed Tag: 57430
  - 9
    - is ser16550 genuine hi, i want to test a generic serial driver,is SER16550 is genuine,which one in oak/drivers/serial should be selected,since i am a beginner,i expect that my questions will get its own importance and it won't be neglected.... thanks Tag: Minimum Processor Speed Tag: 57428
  - 10
    - EXEBASE of NK.EXE Hi all, is there any formalities in giving the EXEBASE to the Kernel in KERN, KERNKITL, KERNKITLPROF? because the default value here in the ARMINTEGRETOR BSP is something like 0x8CC00000 where the NK 88070000 01700000 RAMIMAGE RAM 89770000 00890000 RAM here the address is even outside the RAM Range? is there any way to find it out? regards Sujith Tag: Minimum Processor Speed Tag: 57426
  - 11
    - is it an installation problem hi, while trying to get details about drivers .in the microsoft site,it is given in the following way..... [ Parallel and Serial Devices Documentation Windows DDK: "Serial Ports and Devices" "Parallel Ports and Devices" Driver Sample Code Installed with the DDK: Ports Class Installer %winddk%\src\setup\pnpports Demonstrates a class installer and property page provider for the ports class of devices. The ports class is divided into two types: COM and LPT or ECP (printer) ports. A separate property page is provided for each type of device. The class installer distinguishes both types of devices and installs each type of device differently. Parallel-connected devices %winddk%\src\kernel\parport\ Sample to aid in debugging client drivers and device firmware for parallel port connected devices. Serenum samples %winddk%\src\kernel\serial %winddk%\src\kernel\serenum Plus data definitions in the include file %winddk%\inc\ntddser.h ...] We are using registered version of platform builder 4.2 but i can't see the folder %winddk%\src.. only inc (folder) is there inside DDk,what happened ,is it any problem with installation.... Tag: Minimum Processor Speed Tag: 57424
  - 12
    - [Q]: WMA Hi all, What is(are) the Core OS component(s) in the catalog under "Headless Devices" to support WMA files to be played [WinCE 4.2] ? I have come across "WMA codec" component, Is this the right one ? Presently, I have a audio driver supporting the waveform audio messages. So, Is there anything more to be supported in my audio driver for WMA ? regards sajid Tag: Minimum Processor Speed Tag: 57421
  - 13
    - IME programming problem (Phonetic IME) To all, As from my last post http://groups.google.com/groups?q=50230065+platform&hl=zh-TW&lr=&ie=UTF-8&selm=b894244a.0409211909.222d30a3%40posting.google.com&rnum=2 I've encountered a few problems from modifying existing IME Modules under WinCE.Net 4.2. So I've thought of another alternative like this: Since modifying the source will make the IME dll not to work (I can't even bring up the small keyboards after rebuilding it), what about writing a dll to supply the sendCharEvents and SendKey methods to simulate Word builing directly. I don't know if this really works, since I'm still studying the samples codes. Any comments? From Jason (Kusanagihk) Tag: Minimum Processor Speed Tag: 57420
  - 14
    - cepb4 install on 2003 server, always rollback am install cepb4 on 2003 server, and have installed many times, but always at the register dlls step(this should be the last step,i think) the install program rolled back. and cancelled all the install files. had anybody met this problem, can anyone help me plz. thanks Tag: Minimum Processor Speed Tag: 57415
  - 15
    - PB 5.0: the evaluation version has any difference with the release version except the time restriction? Tag: Minimum Processor Speed Tag: 57414
  - 16
    - erreo while building i get error as compile flush error what is it and how 2 debug it Tag: Minimum Processor Speed Tag: 57409
  - 17
    - Unidentified PCCard Adapter ?? I am working on a PCCard driver. The driver loads OK, all the exports are correctly called but after a minute or two a dialog with the message "Unidentified PCCard Adapter" appears. Is there a registry setting (or ??) that will correctly pair the device an its driver so that this message will not appear? Tag: Minimum Processor Speed Tag: 57390
  - 18
    - JScript problem on CE.NET 4.1 Hi All, I got following simple Javascript code: <html> <head> <script language="Javascript"> alert( "Starting "); window.open("http://www.b2dsolutions.com"); alert("Ending"); </script> </head> <body> <br>this is a test and only a test </body> </html> On desktop it's works fine. But on CE.NET 4.1, the second alert message can't be shown. And later I found all the alert message after window.open will not be shown. Dose anyone have any expenrice on this? Thanks Xu Jun Tag: Minimum Processor Speed Tag: 57386
  - 19
    - BPSs for PB30 to PB42 I have a BSP for pb3.0. I can load it under pb4.2????? Thanks in advance payment Michele Tag: Minimum Processor Speed Tag: 57364
  - 20
    - How to verify NK.BIN is deployable? I know I read somewhere that there was a tool or something that analyzed NK.BIN or the directory hierarcy to determine if my OS images was legit to distribute (aka, no mods to private, etc.). I tried everything I could think of as a search paramater in google. Can someone tickle my memory on what this is, or if it even exists? Nick. Tag: Minimum Processor Speed Tag: 57359
  - 21
    - Unable to load OS image for Thin Client through Ethernet Card. i am unable to load OS image for THIN CLIENT using RealTek 8139 Network Card. Thin Clients boots up and shows Message JUMIPNG TO 0X0013A420. The CONFIGURE option In ETHERNET Tab does not show the device name. i have tried rebooting but same problem. i have also checked the IRQ and IOBASE value in the AUTOEXEC.BAT file and they appear to be allright. can any one guide me. Tag: Minimum Processor Speed Tag: 57352
  - 22
    - [Q]: Driver Samples Hi all, Are there any audio driver samples based on Unified Audio Model as said by Macallan [WinCE5.0]? Just including waveform audio & mixer. regards sajid Tag: Minimum Processor Speed Tag: 57351
  - 23
    - [Q]: Unified Audio Model Hi all, The UAM provides the following advantages: Robustness: Lessens the number of mixing-related problems you will encounter. How does the UAM lessens the number of mixing-related problems ? regards sajid Tag: Minimum Processor Speed Tag: 57350
  - 24
    - Activesync Remote Display send wrong ARM server (cerdisp2) to target (ARMV4 / ARMVi problem?) Hi, I am working on a CE 4.2 display based OS and a target with no screen. In order to see the screen output I use ActiveSync Remote Display from the Windows Mobiel Developer Power Toys. When starting ASRDisp.exe the app some how figures out which server to send to the target ( using dependency walker: CPU ARM or Thumb) and the sends the cerdisp2.exe to the target, starts the client on the host and they connect, result: the screen output on the development host. Nice. This scenario worked correctly when I build the OS for ARMV4I, the cerdisp2.exe Thumb binary was send to the target. When I build the OS for ARMV4, the cerdisp2.exe Thumb binary still gets send to the target in stead of the Standard cerdisp2.exe for ARMV4. What can be the cause of this? (Does ASRDisp.exe query the target or is target info stored locally?) -- Jeroen Kratz Chess iT jeroen_DOT_kratz_AT_chess_DOT_nl Tag: Minimum Processor Speed Tag: 57348
  - 25
    - have problem about IMEI? To Guru Is it possible to get IMEI by never use "lineGetGeneralInfo" ? Best Regard. Tag: Minimum Processor Speed Tag: 57347

is there any minimum processor speed that wince expect for an ARM
processor..?
because I am using a processor which is working in 27MHz...

regards,
jithu

Re: Minimum Processor Speed by Paul

Paul
Wed Sep 29 11:11:08 CDT 2004

No, *it* doesn't care, but your users might care...

Paul T.

"newbie" <newbie@discussion.microsoft.com> wrote in message
news:OeizVchpEHA.516@TK2MSFTNGP09.phx.gbl...
> is there any minimum processor speed that wince expect for an ARM
> processor..?
> because I am using a processor which is working in 27MHz...
>
> regards,
> jithu
>
>

Re: Minimum Processor Speed by newbie

newbie
Wed Sep 29 22:22:55 CDT 2004

Thanks..
Regards
Jithu

"Paul G. Tobey [eMVP]" <ptobey no spam AT no instrument no spam DOT com>
wrote in message news:ejV3p7jpEHA.3988@tk2msftngp13.phx.gbl...
> No, *it* doesn't care, but your users might care...
>
> Paul T.
>
> "newbie" <newbie@discussion.microsoft.com> wrote in message
> news:OeizVchpEHA.516@TK2MSFTNGP09.phx.gbl...
> > is there any minimum processor speed that wince expect for an ARM
> > processor..?
> > because I am using a processor which is working in 27MHz...
> >
> > regards,
> > jithu
> >
> >
>
>

Re: Minimum Processor Speed by K

K
Fri Oct 01 09:13:29 CDT 2004

Although the speed is not a must, Windows CE do require MMU and
Little-Endian.
So if your ARM processor do not have MMU (it is very common on some
entry-level ARM SoC) or can only work in Big-Endian mode,
you can not port the SoC for WindowsCE.

"newbie" <newbie@discussion.microsoft.com> ¼¶¼g©ó¶l¥ó·s»D
:#hWUtxppEHA.3572@TK2MSFTNGP10.phx.gbl...
> Thanks..
> Regards
> Jithu
>
> "Paul G. Tobey [eMVP]" <ptobey no spam AT no instrument no spam DOT com>
> wrote in message news:ejV3p7jpEHA.3988@tk2msftngp13.phx.gbl...
> > No, *it* doesn't care, but your users might care...
> >
> > Paul T.
> >
> > "newbie" <newbie@discussion.microsoft.com> wrote in message
> > news:OeizVchpEHA.516@TK2MSFTNGP09.phx.gbl...
> > > is there any minimum processor speed that wince expect for an ARM
> > > processor..?
> > > because I am using a processor which is working in 27MHz...
> > >
> > > regards,
> > > jithu
> > >
> > >
> >
> >
>
>