Microsoft Loopback Adapter- Virtual Machine Network Services Drive

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - ASX files and prebuffering of content While playing with some .asx files in WinCE5.o and 6.0, I am finding an issue with its prebuffering mechanism. Essentially take an asx file that contains 2 clips on a server: test1.wmv, test2.wmv. They can be with or without the prebuffering tag inserted between the clips: <EVENT NAME="test" WHENDONE="NEXT"> </EVENT> Now when I attempt to play this asx file it will create a graph and play the test1.wmv clip fine. However before the completion of the test1.wmv clip, the 2nd clip test2.wmv will have a graph created for it and will be started (start buffering). This works fine with the built in MS software WMV decoder. However my problem is that the WMV decoder I am using uses a shared hardware resource which means that the 2nd graph will fail because the hardware resource is already in use. If I turn around and insert a small audio only file in the .asx file inbetween test1.wmv and test2.wmv. Then all 3 clips will play properly, because the hardware resource from the first graph is freed by the time the 3rd graph is loaded. My question then is, is there anyway I can prevent the ASXV3 Playlist filter from prebuffering clips and only allow it to start a new clip when the previous clip is complete. Thanks Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108170
  - 2
    - LSP sample in WinCE 6.0 Hi, Please can someone tell me where the LSP sample is located in PB 6.0 sources. I went to Public\Common\SDK\Samples\TSP\LSP but there is no TSP directory Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108159
  - 3
    - USB RNDIS: automatic setup of IP address Is there any good solution to setup automatically an USB RNDIS connection for a CE5.0 based device without bridging or running a local DHCP server in the host PC? It is not needed accessing to the full network but just PC to device communication. The WM2005 seems to support this by running a DHCP server on the device but it seems that is not available on CE5.0. Cheers, MV Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108152
  - 4
    - dxdrvguid.lib in WinCE6.0 Hi All , Can anyone tell me about this dxdrvguid.lib? For what it is used ? Where in WinCE i can find the source code ? When this is used? or From where Can I get or build this lib? Thanks, Vikas Patil Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108150
  - 5
    - while using COm objects. In my VC++ application i have integrated netmeetimng application sharing.Using the com objects available. But it create an instance of netmeeting while i call the function CoGetClassobject(); Instead of that i want to use DLlGetClassObject(); function , in this instance of netmeeting should not be run in background... Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108148
  - 6
    - About FMD driver for virtual inside flash I want to make a part of blocks of inside-flash as a virtual individual flash, and I have written a FMD driver for it , I have make two MBRs on the flash for the 'two' flash, and write the MBRs onto the blocks belongs to the two flash. but I can't see the virtual flash's name in the explore yet. I have verified the two MBR data by only keep one MBR on the flash . but when two MBRs and two FMD drivers are all work, I can't see the virtual flash, only original flash parts can be seen! and throgh remome regedit tool, I saw the two FMD drivers both in 'active' register key. Can anyone give me advice? thanks! Register is set like following: ;;for original flash blocks [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash] "DefaultFileSystem"="FATFS" "PartitionDriver"="mspart.dll" "Folder"="Flash Disk" "Name"="FLASH Disk Block Device" "AutoFormat"=dword:1 "AutoMount"=dword:1 "AutoPart"=dword:1 ;"MountFlags"=dword:11 ;"BootPhase"=dword:0 [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash\FATFS] "FriendlyName"="FAT FileSystem" "Dll"="fatfsd.dll" "Flags"=dword:00000036 "Paging"=dword:1 "EnableCache"=dword:0 "CacheSize"=dword:0 "Util"="fatutil.dll" ;"CacheDll"="diskcache.dll" [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash\PART00] "Folder"="Flash Disk" [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash\PART01] "Folder"="FDDisk" ;;for virtual flash blocks [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\MSFlashU] "Profile"="MSFlashU" "IClass"=multi_sz:"{F0ACCAC3-8596-4f86-A465-E9132DC4A341}" "Order"=dword:0 "FriendlyName"="MSFLASH U Driver" "Dll"="smflash_u.dll" "Prefix"="DSK" "Index"=dword:5 [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlashU] "DefaultFileSystem"="FATFS" "PartitionDriver"="mspart.dll" "Folder"="Flash" "Name"="FLASH Disk U Block Device" ; "Ioctl"=dword:4 "AutoFormat"=dword:1 "AutoMount"=dword:1 "AutoPart"=dword:1 [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlashU\FATFS] "FriendlyName"="FAT FileSystem" "Dll"="fatfsd.dll" "Flags"=dword:00000036 "Paging"=dword:1 "CacheSize"=dword:0 "Util"="fatutil.dll" ;"CacheDll"="diskcache.dll" [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlashU\PART00] "Folder"="Flash" Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108144
  - 7
    - Image download Intel XSCALE. PXA270. PB 5.0. For downloading the nk.bin, currently we are using ethernet. Is it possible to download the image from a CF card inserted into the CF card slot of my device ? Thanks in advance. -Rishi Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108143
  - 8
    - Need help booting/running OS from mDOC (DiskOnChip). I have a Windows CE 5.0 BSP that is based on a PXA270 with 32 MB of NOR FLASH and a SanDisk (M-Systems) H3 mDOC (a.k.a. DiskOnChip). The NOR FLASH is used to store the boot loader and OS image and the OS runs XIP. The mDOC is used as a drive and contains hive registry, application programs, user data, etc. We want to remove the NOR FLASH and use the mDOC for everything. According to the documentation the mDOC has a 32 KB XIP area to boot from so this should be possible. I contacted SanDisk technical support and they confirmed it was possible but that it is not straight forward and that they could not provide support to anyone other than very high volume OEMs. They gave me some sample code but it is not helping me because it is written for Windows Mobile and uses "ImgFS" and possibly other things that I cannot. If anyone has done this, or knows anything that can help me move towards my goal, please respond. Here is what I THINK needs to be done. Please forgive me if I have something wrong but I am still trying to put together the big picture of what is involved. - I need a very small piece of code that will XIP from the 32 KB boot block area in the mDOC. I believe some refer to this as an IPL and its main purpose is to do some hardware initialization, access a binary partition on the mDOC, and copy some code from mDOC to RAM and jump to that code. This copied code could either be the full boot loader (like EBOOT) or the OS image. - Modify EBOOT to update the appropriate mDOC partition with updated code (EBOOT or OS) as opposed to writing to the NOR FLASH which is what currently happens. - Modify the OS image to be able to run (demand paged?) from mDOC. Questions: 1) I have read documentation and it seems like I may need to use NANDIMAGE section in the config.bib file but I am not sure about this because the mDOC is internally NAND but has a NOR style interface. Is NANDIMAGE needed? If so, can someone provide a better explanation than the help? 2) My searches keep coming up with "BinFS" but from the description I am not sure if I need this or not. Again, can someone provide a better explanation than the help? 3) When the boot code copies the OS image into RAM, in order to minimize boot time I would like to only copy the kernel and let everything else be demand paged when needed. Is this possible? If so, how do I configure this? Sorry for the long post. Thanks in advance for any help. Jason Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108140
  - 9
    - Armv6 CE6 compiler support I would like to know if someone knows if a compiler AMRv6 is available for Windows CE 6. Is MS will support it? Regards Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108137
  - 10
    - .NET CF 2.0 SP1??? should be fixed with Windows CE 6.0 R2 update? Hi, I installed Windows CE 6.0 R2 and R2 update in a clean machine, but when I try to debug C# in my embedded platform, debug session does nto stop in my breaks points, I have to install NET CF 2.0 SP1 to solve this. I was expecting that with R2 update I do not have to install .NET CF 2.0 SP1 (without this SP1, I can not debugg my C# app in my embedded platform) According to this page http://www.microsoft.com/downloads/details.aspx?FamilyID=f41fc7c1-f0f4-4fd6-9366-b61e0ab59565&displaylang=en Software requirements necesaries are following. . Required Software: o licensed copy of Windows Embedded CE 6.0 o licensed copy of a Visual Studio 2005 (except Express) o Visual Studio 2005 Service Pack 1. o Visual Studio 2005 Service Pack 1 Update for Windows Vista o Windows Embedded CE 6.0 Platform Builder Service Pack 1 should debug work without NET CF 2.0 SP1??? or is a software requiremetn? Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108136
  - 11
    - LoadMUI Overhead? We have a platform that supports multiple languages (Simplified Chinese, Japanese, Korean, German, French, English, etc). We are not using the standard shell, our application for the platform is written in .Net Compact Framework. We handle changing the language ourselves by loading different resource DLLs and changing the font used to draw the various forms. As we have been running tests against the platform we have noticed that we get the following message essential each time a form is drawn: LoadMUI: Trying \Windows\coredll.dll.0409.MUI My questions are; how much overhead does this represent? Is there an issue with how MUI is configured (We did not include MUI in the platform definition)? Is there a straight forward way to figure out what is including MUI? Thanks for any help. Pat O Cognex, Corp. Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108135
  - 12
    - SDBUS2.dll doesn't work well with SDIO WiFi module Dear experts, I have one problem to use SDIO WiFi module with SDBUS2.dll. I have written SD host controller driver for one ARM CPU. Then the SDIO WiFi card works well with this SD host controller driver. For support SDHC memory card, I replace the SD bus driver with SDBUS2.dll After that, system works well with Sandisk SDHC 4G card, but it can't work with SDIO WiFi card at the same time. Any suggestion for this issue? OS: Windows CE 5.0 QFE: until 2007M6 SDIO WiFi card: Spectec 802.11 b/g Thank you in advance, Brain Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108133
  - 13
    - How does Platform Builder detect the presence of a BSP in CE 6.0? I have created a custom BSP, but the catalog editor only allows the BSP to be placed under the term "third party". Please help with the following questions: 1. How do I have this platform appear just as other BSPs? 2. How does PB know what to build out of the BSP such as the kernel etc? Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108124
  - 14
    - NDIS IM driver query Hi, I have used the Passthru sample to get a basic NDIS IM driver running on the WM 5.0 emulator. What i would like to know is the NDIS packets received by the IM driver from the miniport do they already have the ethernet header stripped off so when i examine the contents of the buffer that the NDIS_PACKET is pointing to i am only dealing with an IP packet. My thinking is the NDIS packet is ignorant of the actual packet data which could be in a different format if it is received in Minitport or IM driver. Thanks Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108120
  - 15
    - Active Server Pages (ASP) Hello Is there somewhere a detailed description what has to be done to get the ASP running and tested. I'd like to have some buttons and textboxes on it. I added the feature "Active Server Pages (ASP) Support" in the platform. I'd like to add some ASP-Pages somewhere on the flash on the board (not in the plattform), where they can be easily updated. Thanks. Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108119
  - 16
    - Strata flash Hai, I have Intel Strata Flash on my board. I used the sample stratad and i am able to load the driver. I downloaded the image into RAM. I could not see "NOR " Folder being created. Here are my registry entries: [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\StrataFMD] "Dll"="stratad.dll" "Order"=dword:0 "Prefix"="DSK" "Ioctl"=dword:4 "Profile"="MSFlash" "IClass"="{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" "XIPEntireFlash"=dword:0 "BlockSize"=dword:10000 "WriteBufferSize"=dword:40 "MemBase"=dword:BE400000 "MemLen"=dword:500000 "IsPairedFlash"=dword:0 "SectorSize"=dword:100 "Flags"=dword:1000 [HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\MSFlash] "DriverPath"="Drivers\\BuiltIn\\StrataFMD" "LoadFlags"=dword:2 ; synchronous load "Order"=dword:0 "BootPhase"=dword:2 [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash \PartitionTable] "04"="FATFS" [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash] "Name"="FMD" "Folder"="NOR" "DefaultFileSystem"="FATFS" "PartitionDriver"="mspart.dll" "AutoMount"=dword:1 "AutoPart"=dword:1 "AutoFormat"=dword:1 "MountFlags"=dword:0 [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash\FATFS] "Dll"="fatfsd.dll" "Flags"=dword:00000014 "Util"="fatutil.dll" "Paging"=dword:1 "CacheSize"=dword:0 "MountAsRoot"=dword:0 "MountPermanent"=dword:1 [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles] "MountFlags"=dword:0 Do i need to add any other settings for folder to create? Please help. Thanks in advance. Renju Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108117
  - 17
    - problem in porting bsp hi, iam porting bsp from wince 5.0 to wince 6.0. eboot.bin and nk.bin are formed. after flashing the eboot.bin to board n when iam trying to attach device, iam getting error !CheckUDP: Not UDP and my workspace is coming out of running state. its working fine till OEMpredownload.. i feel problem is with downloadimage(downloadbin function). can anyone suggest me why it is failing? thanks, sri Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108116
  - 18
    - Problem on soft reset and sleep mode in Windows Mobile Hi all, We are developing the device driver for SDIO-UART in Embedded CE for Windows Mobiles. When the SDIO-UART kit is inserted in SD-Slot the driver will load automatically. Up to this working good. 1) When we soft-reset(warm-boot) the PDA while the card is in inserted condition, the PDA failed to load the driver. After the re-insertion of card only driver is loaded. But according to our requirement, the SDIO-UART based serial device always inserted in the SD slot. What we will do? 2) Similarly for the Sleep mode also, the PDA won't wakeup when the SDIO-UART kit inserted condition. The only solution is soft-reset the PDA; and re-insert the SDIO-UART kit. Is there any work around need to do for soft reset and sleep mode issue. Thanks in Advance. Best Regards, Ramesh. India. Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108115
  - 19
    - Sysgen Error, please help! When I use "Sysgen"ï¼? there are some errors: ERROR: Res2Exe: Res2Res: ERROR: Line: 267 File: f:\macallan2\private\winceos\tools\rescommon\checksum.cpp ERROR: Res2Exe: Res2Res: ERROR: Line: 267 File: f:\macallan2\private\winceos\tools\rescommon\checksum.cpp ERROR: Res2Exe: Error adding resources to target (-1) ERROR: Res2Exe: Error adding resources to target (-1) makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec). makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec). How to solve this problem? Anyone could help me? Thanks very much! Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108108
  - 20
    - Where does SNMP get its info? Does anyone know how the MS supplied SNMP gets its info? GetIpStatistics, GetUdpStatistics and GetIcmpStatistics would appear to contain some of the SNMP data, but for the whole system, not per interface, which SNMP appears to be able to get. I suppose it could get interface byte counts using NDISUIO, or implementing its own NDISUIO... but how does it get the tcpConnTable? Is there an obvious Win32 api I'm missing that can return that info? It would be nice to get the same info SNMP does... I suppose the device could connect to its own SNMP server... but that seems silly. :) Thanks, Andy Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108106
  - 21
    - Storage vs App memory Hello again. Today I have a question about the default way that WINCE 5.0 allocates RAM memory for storage vs application usage. In our system we have almost no need for RAM storage, since most files are generated, modified and deleted on the storage card. However, we have some massive memory hogs as far as applications are concerned (including one massive graphical .NET monster). I noticed that a user can go to the Start > Settings > Control Panel > System > Memory and slide the bar around to change the way memory is utilized. So, I have two questions--as usual--but this time the two questions are actually related--I checked, I swear. The first question is: can I modify that allocation by default, and maximize the Program Memory? Additionally, is there a minimum of "Storage Memory" allocation which I should never, ever, ever drop below, no matter what? Thanks again, Roger Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108098
  - 22
    - Exception Hi, I receive: 16085 PID:400002 TID:4e50002 Faulted in KCall, pCurThread->dwStartAddr = 41182440, PageFreeCount = 000010f9!! 16085 PID:400002 TID:4e50002 Original Context when thread faulted: 16085 PID:400002 TID:4e50002 Exception Access Violation (14): Thread-Id=04e50002(pth=8388a4a0), Proc-Id=00400002(pprc=81aa0c80) 'NK.EXE', VM-active=02c2000a(pprc=83791378) 'servicesd.exe' 16085 PID:400002 TID:4e50002 EIP=8027f901 Flags=00003246 EA=1c061bf8 16085 PID:400002 TID:4e50002 Eax=00000102 Ebx=81a51800 Ecx=5c997a4a Edx=d07bf924 16085 PID:400002 TID:4e50002 Esi=000003e8 Edi=80292e00 Ebp=d07bf8b8 Esp=d07bf8b4 16085 PID:400002 TID:4e50002 CS=0019 DS=0040 ES=0040 SS=0021 FS=0060 GS=0000 16085 PID:400002 TID:4e50002 Context when faulted in KCall: 16085 PID:400002 TID:4e50002 Exception Access Violation (14): Thread-Id=04e50002(pth=8388a4a0), Proc-Id=00400002(pprc=81aa0c80) 'NK.EXE', VM-active=02c2000a(pprc=83791378) 'servicesd.exe' 16085 PID:400002 TID:4e50002 EIP=8022f3a0 Flags=00013202 EA=1c061bf8 16085 PID:400002 TID:4e50002 Eax=0000037c Ebx=81a51800 Ecx=80200000 Edx=1c060018 16085 PID:400002 TID:4e50002 Esi=8022ea30 Edi=81a51720 Ebp=81a516ec Esp=81a516e8 16085 PID:400002 TID:4e50002 CS=0008 DS=0040 ES=1c060040 SS=0010 FS=80270060 GS=81a50000 16085 PID:400002 TID:4e50002 NK Kernel: DEBUGCHK failed in file C:\yzkiqfe\private\winceos\COREOS\nk\kernel\nknormal\..\vm.c at line 1246 16085 PID:400002 TID:4e50002 Faulted in KCall, pCurThread->dwStartAddr = 41182440, PageFreeCount = 000010f9!! 16085 PID:400002 TID:4e50002 Original Context when thread faulted: 16085 PID:400002 TID:4e50002 Exception <Invalid> (3): Thread-Id=04e50002(pth=8388a4a0), Proc-Id=00400002(pprc=81aa0c80) 'NK.EXE', VM-active=02c2000a(pprc=83791378) 'servicesd.exe' 16085 PID:400002 TID:4e50002 EIP=8027f901 Flags=00003246 EA=00000000 16085 PID:400002 TID:4e50002 Eax=00000102 Ebx=81a51800 Ecx=5c997a4a Edx=d07bf924 16085 PID:400002 TID:4e50002 Esi=000003e8 Edi=80292e00 Ebp=d07bf8b8 Esp=d07bf8b4 16085 PID:400002 TID:4e50002 CS=0019 DS=0040 ES=0040 SS=0021 FS=0060 GS=0000 16085 PID:400002 TID:4e50002 Context when faulted in KCall: 16085 PID:400002 TID:4e50002 Exception <Invalid> (3): Thread-Id=04e50002(pth=8388a4a0), Proc-Id=00400002(pprc=81aa0c80) 'NK.EXE', VM-active=02c2000a(pprc=83791378) 'servicesd.exe' 16085 PID:400002 TID:4e50002 EIP=80298153 Flags=00003246 EA=00000000 16085 PID:400002 TID:4e50002 Eax=8388a4a0 Ebx=81a51800 Ecx=81a51800 Edx=8388a4a0 16085 PID:400002 TID:4e50002 Esi=0000000e Edi=81a51648 Ebp=81a515dc Esp=81a515ac 16085 PID:400002 TID:4e50002 CS=0008 DS=80260040 ES=80270040 SS=0010 FS=81a50060 GS=81aa0000 16085 PID:400002 TID:4e50002 NK Kernel: DEBUGCHK failed in file C:\yzkiqfe\private\winceos\COREOS\nk\kernel\nknormal\..\vm.c at line 1246 16085 PID:400002 TID:4e50002 How can I determine where the problem is. Which map file do I use, nk.map or serviced.map? And what is KCall? Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108097
  - 23
    - why inside-flash based usb mass storage will be unmounted automatically when formating on PC? I work on WINCE5. I export one partition of the inside nand flash to PC as a usb mass storage Everytime I format the storage, just before completely finishing, the storage will be unmouted automatically. After a while , the storage will remount again automatically. The format tool will pop up a formating failure dialog, but at fact, the storage has been formatted successfully in deed and works well. I don't know why unmount/mount occured on formatting , and why a failure dialog since formatting successfully when I do the same operation on a SD card based usb storage , there will not be such things. Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108085
  - 24
    - build of image During build of an image to CE 5.0 I can see several rtc.c files being compiled from different directories. Where can I see which rtc.c file is included in the image? Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108084
  - 25
    - Stored contents in my profile(fat filesystem) cann't remove from We are working in mainstone2 kit for setting up a Persistent Data storage with the RAM-Based Registry on a 16MB flash portion mounted with FAT file system .Even though my profile for the storage was created with storage manager showing16MB flash we are unable to do delete the stored files or folder contents in my profile .but i can remove that from remote registry tool.Can u tell me what is the problem with this? Part from this i can't mount a second partiton or dismount the first partition from the storage manger window.So please be kind enough to tell the problem solved. Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108081
- Next
  - 1
    - Intel IEGD display driver Hi all, Chipset: 965GM, ICH8 M Intel core 2 duo I am using intel IEGD 8.0 for the above chipset for display, It is working good in CRT/LCD display, primary display being configured to CRT. If i have configured the primary display as LVDS then the display is showing only one fourth of the total screen, also one half of the image is only displayed...(In the desktop windows CE image will be there i couldnnt see the full fonts of the 'WINDOWS CE'). I have tried with various display options by changing the registry entries, i am not sure where the issue is coming from whether the issue is with intel driver or wrong registry settings. In vga flat frame buffer driver, the fonts are not displayed quickly(taking some time) to display when i click start and upper arrow, also in file menus, right click etc.. Here are the registry settings(intel), if someone has faced similiar problems please help me or suggest me how to proceed with... ;***** BEGIN INTEL DISPLAY DRIVER REGISTRY ENTRY ***** ;***************************************************** ; This file was created based on user variable specified in the CED. ; DriverVer= ;***************************************************** [HKEY_LOCAL_MACHINE\System\GDI\Drivers] "Display"="ddi_iegd.dll" ;[HKEY_LOCAL_MACHINE\System\GDI\Drivers] ; "MainDisplay"="ddi_iegd.dll" [HKEY_LOCAL_MACHINE\System\GDI\Drivers] "D3DMOverride"="ddi_iegd.dll" [HKEY_LOCAL_MACHINE\System\D3DM\Drivers] "RemoteHook"="ddi_iegd.dll" ;******************************************************************** ; The Following Sections Provide ; General Driver-Wide Registry Settings ;******************************************************************** [HKEY_LOCAL_MACHINE\Drivers\Display\Intel] "PcfVersion"=dword:700 "ConfigId"=dword:1 ;******************************************************************** ; The Following Sections Provide Per-Config ; & Per-Port Registry Settings ;******************************************************************** [HKEY_LOCAL_MACHINE\Drivers\Display\Intel\ALL\1] "name"="Ampro_com840_new_2" [HKEY_LOCAL_MACHINE\Drivers\Display\Intel\ALL\1\General] ;------------------------------------- ; Select Display configuration, single, twin ... ;------------------------------------- "DisplayConfig"=dword:5 ;------------------------------------- ; Select if you want to enable Display Detection ;------------------------------------- "DisplayDetect"=dword:0 ;------------------------------------- ; Select Port Order ;------------------------------------- "PortOrder"="45000" "MaxFbSize"=dword:800000 "MinVidSurfX"=dword:10 "MinVidSurfY"=dword:10 "SysToVidStretch"=dword:1 "BlendFilter"=dword:0 "TearFB"=dword:1 "NO_D3D"=dword:0 ;--------------------------------------- ; Config 1 - crt Port ;--------------------------------------- ; Following are the registry ; entries for port's general config ;------------------------------- [HKEY_LOCAL_MACHINE\Drivers\Display\Intel\ALL\1\Port\5\General] "Name"="crt" "Rotation"=dword:0 "Edid"=dword:1 "EdidAvail"=dword:3 ; STD TIMINGS + EDID TIMINGS + USER TIMINGS "EdidNotAvail"=dword:1 ; STD TIMINGS + USER TIMINGS ;------------------------------- ; Following are the registry entries ; for port's DVO I2C settings ;------------------------------- [HKEY_LOCAL_MACHINE\Drivers\Display\Intel\ALL\1\Port\5\DVO] ;------------------------------- ; Following are the registry entries ; for port's flat panel's mode-limits, ; power and backlight control ;------------------------------- [HKEY_LOCAL_MACHINE\Drivers\Display\Intel\ALL\1\Port\5\FPInfo] ;------------------------------- ; Following are the registry entries ; for ports first custom DTD mode to add ;------------------------------- ; Following are the registry entries for the port device' display attribute parameters ; ;------------------------------- [HKEY_LOCAL_MACHINE\Drivers\Display\Intel\ALL\1\Port\5\Attr] ;--------------------------------------- ; Config 1 - lvds Port ;--------------------------------------- ; Following are the registry ; entries for port's general config ;------------------------------- [HKEY_LOCAL_MACHINE\Drivers\Display\Intel\ALL\1\Port\4\General] "Name"="lvds" "Rotation"=dword:0 "Edid"=dword:1 "EdidAvail"=dword:3 ; STD TIMINGS + EDID TIMINGS + USER TIMINGS "EdidNotAvail"=dword:1 ; STD TIMINGS + USER TIMINGS ;------------------------------- ; Following are the registry entries ; for port's DVO I2C settings ;------------------------------- [HKEY_LOCAL_MACHINE\Drivers\Display\Intel\ALL\1\Port\4\DVO] ;------------------------------- ; Following are the registry entries ; for port's flat panel's mode-limits, ; power and backlight control ;------------------------------- [HKEY_LOCAL_MACHINE\Drivers\Display\Intel\ALL\1\Port\4\FPInfo] ;------------------------------- ; Following are the registry entries ; for ports first custom DTD mode to add ;------------------------------- ; Following are the registry entries for the port device' display attribute parameters ; ;------------------------------- [HKEY_LOCAL_MACHINE\Drivers\Display\Intel\ALL\1\Port\4\Attr] "32769"=dword:0 "12"=dword:0 ;------------------------------------- ; Provide a list of port drivers to attempt to load upon boot time ;------------------------------------- [HKEY_LOCAL_MACHINE\Drivers\Display\Intel] "PortDrivers"="lvds" ;------------------------------------- ; Optional - Only enable for font anti-aliasing ; Enabling this causes minor performance impact ; Only recommended for TV Output. [HKEY_LOCAL_MACHINE\System\GDI\Fontsmoothing] [HKEY_LOCAL_MACHINE\System\GDI] "ForceGRAY16"=dword:1 ;***** INTEL DISPLAY DRIVER REGISTRY ENTRY END ******* ;***************************************************** Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108080
  - 2
    - connect/closesocket causes memory problems Hello everybody. I am Javi from Spain. We are working with Windows CE 5.0 and we have developed an application which try to "connect" with several devices using non- blocking sockets. These devices are disconnected, so "connect" function will not be completed. Using "select" function we detect when "connect" is not completed and we call "closesocket" function (socket resources are freed). But we can observe that "dwAvailPhys" memory in our device GETS DOWN each time connect/closesocket are invoked (in 2/3 days our device resets because "connect" retries are executed every minute). We have read in several Webs that Windows NT (see Microsoft article 171996) and Windows CE 4.1 (see Microsoft article 817758) had the same (or very similar) problem that we are describing. Please, can anyone tell us if this is an existing problem in Windows CE 5.0? If yes, is there any update which correct this problem? Any idea about how to avoid this problem? Thank you very much in advance. Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108076
  - 3
    - Windows CE 5.0 - Unable to initialize/mount BINFS Hello, I have a problem using the BINFS in combination with NANDIMAGE sections. Iam trying to create some NANDIMAGE sections in my image. In these NANDIMAGE sections i want to store read-only configuration files which can be read (from within windows CE as a normal file) during run time to configure some system parts. First i will explain what i have done so far and which troubles i encouter. Afterwards i have some questions whose answers may help me further. First i added the NANDIMAGE sections, CONFIG_B, CONFIG_C, CONFIG_D and CONFIG_E to the MEMORY section in the config_cebase.bib file: MEMORY ; Name Start Size Type ; ------- -------- -------- ---- RSVD 80000000 000FF000 RESERVED ARGS 800FF000 00001000 RESERVED NK $(NK_START) $(NK_SIZE) RAMIMAGE RAM $(NKRAM_START) $(NKRAM_SIZE) RAM ZBANK 9A500000 00100000 RESERVED EBOOT 9AA00000 00040000 RESERVED BOOTCFG 9AA40000 00040000 RESERVED CONFIG_B 90B00000 00100000 NANDIMAGE CONFIG_C 90C00000 00100000 NANDIMAGE CONFIG_D 90D00000 00100000 NANDIMAGE CONFIG_E 90E00000 00C00000 NANDIMAGE CHAIN 90EC0000 00040000 RESERVED Secondly i added some settings the CONFIG section in the config.bib file: CONFIG DLLADDR_AUTOSIZE=ON RAM_AUTOSIZE=OFF ROM_AUTOSIZE=OFF XIPSCHAIN=90EC000 After this i added the following registry settings (only registry settings for CONFIG_B are given here): ; Register settings for configuration bin file ; Adding block device driver [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Config_B_Flash] "Dll"="stratad_flash_driver_config_B.dll" "Order"=dword:2 "Prefix"="DSK" "Profile"="Config_B_Flash" "IClass"="{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" "ActualFlashBase"=dword:AEB00000 "MemBase"=dword:B0B00000 "MemLen"=dword:00100000 "IsPairedFlash"=dword:1 "XIPEntireFlash"=dword:1 ; Specific settings for profile [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\Config_B_Flash] "Name"="Config B Flash" "Folder"="Config_B_Files" "DefaultFileSystem"="BINFS" "AutoMount"=dword:0 "AutoPart"=dword:0 "AutoFormat"=dword:0 "PartitionDriver"="mspart.dll" And some settings for the binary file system [HKEY_LOCAL_MACHINE\System\StorageManager\BinFS] "FriendlyName"="BIN Filesystem" "Dll"="binfs.dll" "Paging"=dword:1 "MountAsROM"=dword:1 [HKEY_LOCAL_MACHINE\System\StorageManager\PartitionTable] "20"="BOOT" "21"="BINFS" After a sysgen my config.lst (which can be found in the release directory) looks like: MEMORY RAM 83100000 f00000 RAM NK 80100000 1eb02d0 RAMIMAGE CONFIG DLLHIGHCODEADDR NK 4000000 DLLLOWCODEADDR NK 2a50000 DLLHIGHADDR NK 2000000 DLLLOWADDR NK 19e0000 MEMORY CONFIG_B 90b00000 89a70 NANDIMAGE CONFIG DLLHIGHCODEADDR CONFIG_B 2a50000 DLLLOWCODEADDR CONFIG_B 2a50000 DLLHIGHADDR CONFIG_B 19e0000 DLLLOWADDR CONFIG_B 19e0000 MEMORY CONFIG_C 90c00000 89a70 NANDIMAGE CONFIG DLLHIGHCODEADDR CONFIG_C 2a50000 DLLLOWCODEADDR CONFIG_C 2a50000 DLLHIGHADDR CONFIG_C 19e0000 DLLLOWADDR CONFIG_C 19e0000 MEMORY CONFIG_D 90d00000 89a70 NANDIMAGE CONFIG DLLHIGHCODEADDR CONFIG_D 2a50000 DLLLOWCODEADDR CONFIG_D 2a50000 DLLHIGHADDR CONFIG_D 19e0000 DLLLOWADDR CONFIG_D 19e0000 MEMORY CONFIG_E 90e00000 89a70 NANDIMAGE CONFIG DLLHIGHCODEADDR CONFIG_E 2a50000 DLLLOWCODEADDR CONFIG_E 2a50000 DLLHIGHADDR CONFIG_E 19e0000 DLLLOWADDR CONFIG_E 19e0000 When i start debugging on target (PXA270 processor, 64 MB Intel NOR Flash (p30) memory and 64 MB RAM memory, WindowsCE 5.0) the following happens: During startup of the image the binary file system is initialized (call to the function : BINFS!InitVolume). This initialization of the binary file system fails due to the failure of the function NK!SetROMDllBase. Within this function an attempt is made to virtually allocate 0x019E0000 bytes. This call to VirtualAlloc can be found in the following piece of code (..\wince500\platform\private\winceos\coreos\nk\kernel\loader.c - line 441, within the SetROMDllBase function): else if ( (pInfo->dwSlot_0_DllBase < ROMDllLoadBase) && !(pSlot0Base = VirtualAlloc ( (LPVOID)(ProcArray[0].dwVMBase+pInfo->dwSlot_0_DllBase), ROMDllLoadBase - pInfo->dwSlot_0_DllBase, MEM_RESERVE|MEM_IMAGE, PAGE_NOACCESS) ) ) { DEBUGMSG (1, (L"SetROMDllBase: VirtualAlloc Failed (%8.8lx -> %8.8lx)\r\n", pInfo->dwSlot_0_DllBase, ROMDllLoadBase)); } Here it tries to allocate (ROMDllLoadBase - pInfo->dwSlot_0_DllBase) = (0x019E0000 - 0x00000000) = 25.875 MB. This size (0x019E0000) is equal to the size of the variable ROMDllLoadBase. At this point the stack looks like: NK!SetROMDllBase(unsigned long 0x00000034, _ROMINFO * 0x000c0850 {dwSlot_0_DllBase=0x00000000 dwSlot_1_DllBase=0x04000000 nROMs=0x00000005 }) line 413 NK!KernelLibIoControl_Core NK!NKKernelLibIoControl NK!SC_KernelLibIoControl COREDLL!xxx_KernelLibIoControl BINFS!InitVolume(BinVolume * 0x000c2fd0 {hVolume=0x00000000 hDsk=0x000c2d60 pChain=0x000c05e0 {dwAddress=0x90e00000 dwLength=0x00c00000 wOrder=0x0004 ...} ...}) line 396 + 44 bytes BINFS!FSD_MountDisk FSDMGR!InitEx FSDMGR!CPartition::MountPartition FSDMGR!CStore::LoadPartition FSDMGR!CStore::LoadExistingPartitions FSDMGR!CStore::MountStore FSDMGR!AutoLoadFileSystems FSDMGR!InitStorageManager FSDMGR!Init FILESYS!InitStorageManager FILESYS!prgInitRamRegistry FILESYS!prgInitRegistry FILESYS!DoGeneralInit FILESYS!WinMain COREDLL!MainThreadBaseFunc Debug information of BINFS at this point looks like: Loaded symbols for 'C:\WINCE500\PBWORKSPACES\MyWorkspace\RELDIR\MYIMAGE_ARMV4I_DEBUG\BINFS.DLL' OEMIoControl: Unsupported Code 0x1010104 - device 0x0101 func 65 BINFS: ChainInfo - Address=80100000 Length=50331648 Order=0 Flags=0001 BINFS: ChainInfo - Address=90B00000 Length=1048576 Order=1 Flags=0001 BINFS: ChainInfo - Address=90C00000 Length=1048576 Order=2 Flags=0001 BINFS: ChainInfo - Address=90D00000 Length=1048576 Order=3 Flags=0001 BINFS: ChainInfo - Address=90E00000 Length=12582912 Order=4 Flags=0001 BINFS: InitVolume - Signature of ROM Header does not Match- Assuming Chain Region BINFS: InitVolume - Signature of ROM Header does not Match- Assuming Chain Region BINFS: InitVolume - Signature of ROM Header does not Match- Assuming Chain Region BINFS: InitVolume - Signature of ROM Header does not Match- Assuming Chain Region BINFS: Num Regions = 5 Slot0Base=0x02000000 Slot1Base=0x04000000 BINFS: Region 0: High=0x00000000 Low=0x00010000 BINFS: Region 1: High=0x00000000 Low=0x00010000 BINFS: Region 2: High=0x00000000 Low=0x00010000 BINFS: Region 3: High=0x00000000 Low=0x00010000 BINFS: Region 4: High=0x02000000 Low=0x01e50000 SetROMDllBase: VirtualAlloc Failed (00000000 -> 019e0000) IOCTL_KLIB_SETROMDLLBASE failed !!! BINFS: DEBUGCHK failed in file c:\macallan\private\winceos\coreos\fsd\binfs\src\main.cpp at line 398 <<< Unloading module binfs.dll at address 0x03C50000-0x03C5D000 Unloaded symbols for 'C:\WINCE500\PBWORKSPACES\MyPlatform\RELDIR\MYIMAGE_ARMV4I_DEBUG\BINFS.DLL' InitSharedHeap: 48000000 10000 c InitSharedHeap: return 48000060 Questions: 1. Why does the function SetROMDllBase virtually allocates 25.875 MB? What does this variable ROMDllLoadBase mean? And why has it the value 0x019E0000? Does the ROMDllLoadBase variable has any relation with DLLHIGHADDR and/or DLLLOWADDR which can be found in the config.lst? Why do i need an address space for DLLâ??s when the NANDIMAGE sections only contain configuration data and not code? 2. Why do i need a DLL address range for my config files which only contain data and no executables? Why do i need to set DLLADDR_AUTOSIZE=ON in my platform configuration? 3. Is this the right approach when you want to store some read-only configuration files in flash which can be read under Windows CE as a normal file? Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108074
  - 4
    - Keypad and LCD Drivers Hi Guys, I am very new to BSP. My requirement is writing drivers for the Keypad and the LCD in Windows CE 6.0. So can you guys tell a approximate time required to achieve this since i need to adjust my schedule. I am a Firmware developer. Any suggestion will be a great help to me. Thanks in advance. Chandra. Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108073
  - 5
    - About universal keyboard control (hook ?) Hello every body, I want to use keyboard to control the volume when WinCE system started , no matter what program will run after , of course my app will run first , Did HOOK app(dll) is the best choice ? Do I have another chocice ? In most of time ,My hook is no problem at all , but sometimes system will halt when use hook I found (espacilly when the app (map program )run for a long time later ) . I don't know if the hook will bring some confilct with current run program ? By the way , my hook dll will pop up a dialog to show volume degree when keyboard is press. Thank you very much for you help or comment ! Best regrads, Calvin Liu Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108072
  - 6
    - Could not go to definition of functions, Please help! In Platform Builder 5.0, when I select a function, right click and select "Go To Definition Of ...", it always prompts "Browse information is not available in this project. Please set the "Generate browse information" field to "Yes" under the project settings dialog box and rebuild your project". After I set the field to "Yes" according to what is suggested and rebuild the project, the problem still happens. I still cannot look at the definition of the functions... I wonder how can I solve this problem? Is there anyone could be of help? Thanks very much! Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108070
  - 7
    - IssueIsochTransfer I am trying to implement Audio streaming class on WinCE. The connected USB device sends audio packets every 8th microframe, i.e. 1ms. I have based the code on KB article: http://support.microsoft.com/kb/317434 First I tried reading 4 frames in one transfer, but somehow with this approach WinCE USB host sends 4 IN packets every microframe instead of a frame. I have confirmed this from a USB analyzer. So I reduced the number of frames per transfer to 1. With that here is a rough structure of my code: Callback () { printf ("FF"); CloseTransfer (); ReleaseSemaphore (1); } AudioStreamingThread () { CreateSemaphore (8,8); while (1) { printf ("AA"); WaitForSemaphore (); printf ("BB"); IssueIsochTransfer (Callback, USB_NO_WAIT | USB_IN_TRANSFER, dwNextFrame, Buffer); printf ("CC"); dwNextFrame ++; } } With the semaphore count of 8 it reads 8 Isoch packets but then for the 9th packet Issue call returns with an error printing: !CIsochronousPipe::IssueTransfer - cannot meet the schedule (reqFrame=00018c39, curFrame=00018c3c !CIsochronousPipe::IssueTransfer - cannot meet the schedule (reqFrame=00018dc9, curFrame=00018e24 With the prints above in the code, I see the following log: AA BB CC AA BB CC AA BB CC AA BB CC AA BB CC AA BB CC AA BB CC AA BB CC AA FF BB FF FF FF FF FF FF FF CC Basically, the 9th IssueTransfer call gets stuck and comes out only when all the previous Isoch transfer callbacks are done which introduces the delaying frame number for the 9th frame. Increasing the AudioStreaming thread to highest priority didn't help. Can anyone help me out here. Cheers, Ashu Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108069
  - 8
    - ECC Error Handling How does Windows CE handles errors from the memory controller? I just need a little bit of a tutorial ... Please send links or other references. Thanks. Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108061
  - 9
    - Timeout for Touch Calibration UI Hi, I need to modify the calibration tool for a device without a keypad/ keyboard... How can i add a timeout if the user doesnt press any key? Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108058
  - 10
    - connecting to a handheld device using platform builder Hi, I have a MIPSII device with a WinCE 5.0 image flashed made by using AMDDBAU1100MIPSII BSP. What I like to know is how do I connect to this device using platform builder. This device has two serial ports, couple of USB ones and a Network port. I gave an ip address and connected a back to back cable to my host pc which has platform builder hoping that it would send bootme packets to my pc containing platform builder. I couldnot see anything. FYI the ip addresses in the host and the device are under the same subnet. I want to debug my driver and application in the platform builder just like I would do with a cepc machine. Can any one suggest me regarding this. If its not possible with platform builder, then how it is done. Thanks in advance Srinivas Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108054
  - 11
    - How to get the POOM notification in wince6.0 I know there is a mechanism of POOM notification in windows mobile 5 and above, which can tell the changes in local and remote process. But I found that it doesn't work in wince6.0, and didn't find oher information. How can I get the POOM change notification in wince6.0 Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108046
  - 12
    - Cannot resume back to normal mode.... Hi, Below is the sample code we used to make the CEPC (WINCE device) enter suspend mode and resume back it to normal mode after 2 min. The device is able to enter suspend mode successfully. However the device is not coming back to normal mode after 2 sec even if the event was set using the API "SetKernelAlarm ()". It seems, after the device went to suspend mode the kernel alarm stopped working. That means nothing was working (except RTC, becuase after the device is resumed back, the system gets updated automatically) when the device went to suspend mode. The only to make the system resume back to normal mode is to move the mouse (provide external event). Is it right? If not, please correct our code, so that our device will comeback to normal mode programmatically. Please find the code below. #include <hidparse.h> #include <Winbase.h> #include <pm.h> #include <Mmsystem.h> #include <Notify.h> #include <pkfuncs.h> DWORD SetSystemPowerState( LPCWSTR psState, DWORD StateFlags, DWORD Options ); void function (void); HANDLE hWakeEvent; HANDLE suspendthread; HANDLE resumeevent; VOID resumethreadfunction(LPVOID lpParam); /***************after declaration part*****************/ void HIDP_FunctionTests(void) { /************************code for Suspend resume test starts *********************************************************/ SYSTEMTIME time,time1; GetSystemTime (&time); //setting time1 for 2 sec span; time1.wDay=time.wDay; time1.wDayOfWeek=time.wDayOfWeek; time1.wHour=time.wHour; time1.wMilliseconds=time.wMilliseconds; /********here time1 wMinute parameter is changed.************/ time1.wMinute=time.wMinute+2; time1.wMonth=time.wMonth; time1.wSecond=time.wSecond; time1.wYear=time.wYear; resumeevent= CreateEvent(NULL, FALSE, FALSE, _T("WAKE")); //****creating a thread to wait on this event suspendthread=CreateThread (NULL,0,(LPTHREAD_START_ROUTINE) resumethreadfunction,&resumeevent,0,NULL); /**********the kernel alarm is set here****/ SetKernelAlarm(resumeevent, &time1); /****8device goes to suspend mode**********/ SetSystemPowerState (NULL, POWER_STATE_SUSPEND, POWER_FORCE); } /************************code for Suspend resume test ends*****************************/ /***************implementation of suspend thread*************/ void resumethreadfunction(LPVOID lpParam) { LPVOID temp; temp=lpParam; while (1) { WaitForSingleObject (resumeevent, INFINITE); SetSystemPowerState (NULL, POWER_STATE_ON, POWER_FORCE); } } Note: There were no compilation errors, observed. Everything is proper. The execution stopped after the below point. 362263 PID:400002 TID:53000e Calling OEMPowerOff... When the mouse is moved, the device resumed back to normal mode. 362265 PID:400002 TID:53000e Back from OEMPowerOff Please help us on this scenario. Please provide a sample code if you have any. We used the sample code at this link also, but is of no use. http://groups.google.com/group/microsoft.public.windowsce.embedded/browse_thread/thread/e7de23536cf3bb72. Please do not provide the same sample code. Please explain our mistake briefly if any. Please expalin the process behind this i.e. how to set events when the device goes suspend mode. Regards, Ram Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108045
  - 13
    - Cannot resume the CEPC back to normal mode after suspend mode Hi, Below is the sample code we used to make the CEPC (WINCE device) enter suspend mode and resume back it to normal mode after 2 min. The device is able to enter suspend mode successfully. However the device is not coming back to normal mode after 2 sec even if the event was set using the API "SetKernelAlarm ()". It seems, after the device went to suspend mode the kernel alarm stopped working. That means nothing was working (except RTC, becuase after the device is resumed back, the system gets updated automatically) when the device went to suspend mode. The only to make the system resume back to normal mode is to move the mouse (provide external event). Is it right? If not, please correct our code, so that our device will comeback to normal mode programmatically. Please find the code below. #include <hidparse.h> #include <Winbase.h> #include <pm.h> #include <Mmsystem.h> #include <Notify.h> #include <pkfuncs.h> DWORD SetSystemPowerState( LPCWSTR psState, DWORD StateFlags, DWORD Options ); void function (void); HANDLE hWakeEvent; HANDLE suspendthread; HANDLE resumeevent; VOID resumethreadfunction(LPVOID lpParam); /***************after declaration part*****************/ void HIDP_FunctionTests(void) { /************************code for Suspend resume test starts *********************************************************/ SYSTEMTIME time,time1; GetSystemTime (&time); //setting time1 for 2 sec span; time1.wDay=time.wDay; time1.wDayOfWeek=time.wDayOfWeek; time1.wHour=time.wHour; time1.wMilliseconds=time.wMilliseconds; /********here time1 wMinute parameter is changed.************/ time1.wMinute=time.wMinute+2; time1.wMonth=time.wMonth; time1.wSecond=time.wSecond; time1.wYear=time.wYear; resumeevent= CreateEvent(NULL, FALSE, FALSE, _T("WAKE")); //****creating a thread to wait on this event suspendthread=CreateThread (NULL,0,(LPTHREAD_START_ROUTINE) resumethreadfunction,&resumeevent,0,NULL); /**********the kernel alarm is set here****/ SetKernelAlarm(resumeevent, &time1); /****8device goes to suspend mode**********/ SetSystemPowerState (NULL, POWER_STATE_SUSPEND, POWER_FORCE); } /************************code for Suspend resume test ends*****************************/ /***************implementation of suspend thread*************/ void resumethreadfunction(LPVOID lpParam) { LPVOID temp; temp=lpParam; while (1) { WaitForSingleObject (resumeevent, INFINITE); SetSystemPowerState (NULL, POWER_STATE_ON, POWER_FORCE); } } Note: There were no compilation errors, observed. Everything is proper. The execution stopped after the below point. 362263 PID:400002 TID:53000e Calling OEMPowerOff... When the mouse is moved, the device resumed back to normal mode. 362265 PID:400002 TID:53000e Back from OEMPowerOff Please help us on this scenario. Please provide a sample code if you have any. We used the sample code at this link also, but is of no use. http://groups.google.com/group/microsoft.public.windowsce.embedded/browse_thread/thread/e7de23536cf3bb72. Please do not provide the same sample code. Please explain our mistake briefly if any. Please expalin the process behind this i.e. how to set events when the device goes suspend mode. Regards, Ram Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108044
  - 14
    - External debuggers supported by WINCE 6.0 Hi I am working on winCE 6.0 BSP developement for MC9328MXL board which uses ARM920T core. I want to know which are all the external debuggers supported by WinCE 6.0 for BSP develpement. Thanks & Regards, Chitra Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108042
  - 15
    - EAPOL 802.11 Wifi WPA CE5 We are attempting to write a device driver for a wifi card in our CE5 based platform. The basic operation is fine and we can connect to access points which are either open or use WEP. We are having problems with WPA access. When we connect EAPOL gets started up and here is its debug: ZCF:: LogEvent Force close EAPOL session for SSID[] new SSID[ajmtest] EOL: EolSessionCreate 677980 EOL: 677980 State Logoff --> Disconnected EOL: 677980 - StopTimer (running=0) EOL: +MediaConnect ajmtest EOL: MediaConnect - SSID changed EOL: 677980 State Disconnected --> Connecting EOL: 677980 - StopTimer (running=0) EOL: 677980 StartTimer 500 ms, state=Connecting EOL: 677980 EVENT - Timer Expired state=Connecting refcnt=2 EOL: 677980 State Connecting --> Connecting EOL: 677980 - StopTimer (running=0) EOL: 677980 StartTimer 3000 ms, state=Connecting EOL: Supp TX Type=EAPOL_Start NIO: Send EAPOL packet type 888E 18 bytes to DestMAC=001150DA78B5 We can then see the packet sent out of the wifi card Tx 60 000000 00 11 50 DA 78 B5 00 16 FE 2F 88 3A 88 8E 01 01 .. 000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .. 000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .. 000030 00 00 00 00 00 00 00 00 00 00 00 00 .. The AP then responds with Rx 113 000000 00 16 FE 2F 88 3A 00 11 50 BA 78 B5 88 8E 01 03 .. 000010 00 5F FE 00 89 00 20 00 00 00 00 00 00 00 17 91 .. 000020 6E 73 9A 2A BD B3 35 50 88 54 38 0B 30 82 CF 87 .. 000030 FC 7C 0C 22 A3 BF FB CC EB 88 C6 46 85 9B 2B 00 .. 000040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .. 000050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .. 000060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .. 000070 00 .. and this causes the following in EAPOL EOL: Supp RX Type=EAPOL_Key EOL: 677980 - StopTimer (running=1) EOL:: WPA: usKeyInfo[0x89] - Rx ReplayCounter [50] - Last ReplayCounter [[0] KeyReceived[0x0] EOL:: WPA: ElKeyReceiveSSN - First packet of 4 way handshake. EOL: 677980 State Connecting --> WPA-Authenticating EOL: 677980 - StopTimer (running=0) EOL: 677980 StartTimer 5000 ms, state=WPA-Authenticating then the AP sends the same packet again, and EAPOL responds with the same debug. Then the connection is dropped. It appears to me that EAPOL should respond in some way to the incoming packet from the AP, but it does not do so fast enough for the AP, so the AP sends the same packet again. From this line: EOL: 677980 StartTimer 5000 ms, state=WPA-Authenticating It looks like EAPOL is not going to do anything for 5s - but this is far too long for the AP to wait around! (Or maybe it means if nothing happens for 5s EAPOL will then timeout?) Anyone any ideas what is happening here? Who is waiting for whom? Should EAPOL respond to the incoming packet from the AP, if so why isn't it? Is EAPOL source available in CE5? I couldn't find it. Many thanks Andrew Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108041
  - 16
    - Setting alarm using OEMSetAlarmTime hi, I am working on WinCE 5.0, PXA270 processor for a handset. I have implemented OEMGetRealTime( ) and OEMSetRealTime( ) and clock is running well from the external RTC.My doubt is about OEMSetAlarmTime.( ).How i can implement that function to set alarm at a particular time.I couldnt find anything in control panel of the device about alarm. Do i need to add something to the platform to get that?. Or Something else i need to do Plz help me in this. Thanks in advance Regards Jipin Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108038
  - 17
    - problem about execution in place Hello to everybody I'm a wince newbie. I don't understand how the boot sequence occurs from NOR. I have flashed a wince image on my nor device. Eboot launches the flashed image. The execution arrives at the KernelRelocate. I thought that after relocation in RAM the execution would be moved to ram. Instead I continue to see many access to the nor. Is this right? Which sections of the image are moved to ram? Which others continue to be run from nor? Is there any way to force the image to run completely from ram after relocation? When the image is downloaded from ethernet through Platform builder, there is no flash accesses after relocation. Then the image is running definetely from RAM with the best performances. Probably I'm wrong in my suppositions. Please help me to understand better the boot sequence. best regards fabio antonini Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108037
  - 18
    - Hoe does OBEX Layer gets connected with Socket in Bluetooth??? Hi I am using WinCE 5.0 and am developing an appilcation over bluetooth. I have done Device discovery and service discovery through SOckets and then I am creating aninstance of Obex and then calling connect. But when I try to call OBEX's Get method it does not returns the correct stream data.. I think that the SCN that I get during OBEX Service discovery and the one that i am using in OBEX Connect are different. So is there any solution for this scenario???? I have tried using OBEX layer's device and service discovery also but I am getting stucked at the same place. -- Regards, Anshul Gupta Communication & Embedded Systems Mumbai. Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108036
  - 19
    - Hardware Trap in WINCE Hi all, I am working on WINCE 6.0 BSP for ARM920T core. I have enabled KITL and I can view threads, process and memory. I am facing problem while booting. Everytime I boot it is looping in HwTrap code. By looking at callstack I could find it in ConnectKD function which calls HDModLoad( (DWORD) g_pprcNK); which is defined as HdstubTrapModuleLoad function which calls HwModLoadHandler function Here is the callstack for reference 0Xd001fcac NK!OsAxsHwTrap + 20 bytes 0Xd001fcac HD!HwModLoadHandler( unsigned long 0x80651aa0) hdhw.c line 101 0Xd001fcc4 HD!HdstubTrapModuleLoad( unsigned long 0x80651aa0) hdstub.c line 508 0Xd001fd04 KERNEL!ConnectKD( void * )xc0019bb8) ksysdbg.c line 719 0Xd001fdc8 KERNEL!DoAttachDebugger( const unsigned short * * 0xd001fe10m ubt 0x00000001) ksysbgb.c line 798 + 12 bytes 0Xd001fe10 KERNEL!SysDebugInit() ksysdbg.c line 876 0Xd001fe2c KERNEL!SystemStartupFunc( unsigned long 0x00000000) schedule.c line 855 by tracing this I could find that in HwModLoadHandler Function HdstubNotify function is called which is defined to //HdstubNotify is now living in kwin32.c as HwTrap #define HdstubNotify (g_hdStubData.pfnHwTrap) in Hdstub_p.h file. This is causing the Trap. Can anyone please help me in saying what this Hardware Trap is. Please reply. Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108035
  - 20
    - SDK generation for VS2005 Hi, After I've configured the operating system with Platform Builder to generate an SDK for an OS, how do I know if this SDK can be used in eVC++ or VS2005 for application development? Previously, I did this step for eVC++ and everything seems to work fine. I wonder if there is additional step in the SDK generation for migration to VS2005. Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108024
  - 21
    - Rebuild Issue after modifying Sources File In my cloned BSP, I have copied a file (say XXX.c to YYY.c) and modified the SOURCES file in that directory to chance it from XXX.c to YYY.c. I have always been successful rebuilding the OSDesign when using the XXX.c file, but when I change it to YYY.c, I get all kinds of strange errors... =========================================================== Error: Could not find file 'C:\Projects\CE\SierraOSDesign \SierraOSDesign\RelDir\SierraBSP_ARMV4I_Release\oal.exe' on disk nk.exe C:\Projects\CE\SierraOSDesign\SierraOSDesign\RelDir \SierraBSP_ARMV4I_Release\oal.exe NK SHZ Error: failed setting line makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec). makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec). BLDDEMO: SierraOSDesign build complete. SierraOSDesign - 5 error(s), 6 warning(s) ========== Rebuild All: 0 succeeded, 1 failed, 0 skipped ========== Any help would be appreciated. Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108018
  - 22
    - Mu fucntion only works when debuging step by step?? Hello, I have in my application a function that just looks for a file and if it exist returns the size. If I call this function looking for a existing file, it only works fine if I execute the code step-by-step, otherwise it returns as if the file doen't exist. What could this behavior mean? Some sort of stack corruption/overflow? Although I don't supose it's related with this issue, this is the function that ever returns '1' if it's not executed step by step: int GetFileStat( const char *path, long *lpSize ) { HANDLE hFile; TCHAR szFile[200]; WIN32_FIND_DATA xFileInfo; mbstowcs( szFile, path, strlen(path)); hFile = FindFirstFile( szFile, &xFileInfo ); if( hFile != INVALID_HANDLE_VALUE ) { // equivalent ??? buffer->st_mode = xFileInfo.dwFileAttributes ; // File > 4GB ?? xFileInfo.nFileSizeHigh; *lpSize = (long) xFileInfo.nFileSizeLow; FindClose( hFile ); return 0; } return 1; } Thanks and sorry for my english Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108014
  - 23
    - Regarding backbuffer in Display driver Hello, I am testing directdraw for my display driver in Windows CE 6.0. I am facing a problem when testing the DirectDraw CETK testcases(Testcase 330 - flip). The flipping of the backbuffer from primary shows- top part of the screen as blurred. Both primary and backbuffer are allocated from video memory. What would be cause of the problem. Please somebody help me. 315230 PID:4560012 TID:48e0012 Testing Source Surface : Primary 315231 PID:4560012 TID:48e0012 Writing to primary 315233 PID:4560012 TID:48e0012 Flipping to first backbuffer 315239 PID:4560012 TID:48e0012 Writing to first backbuffer 315241 PID:4560012 TID:48e0012 Flipping to primary 315242 PID:4560012 TID:48e0012 Flip #0 315244 PID:4560012 TID:48e0012 ### Flip returned hr=DDERR_WASSTILLDRAWING (0x8876021C) [FILE: Also, can anybody tell me how to expose system allocated surfaces to DDraw ? How can such surfaces can be accessed directly from applications without causing any exception ? TIA, Gomas regards, Gomas Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108009
  - 24
    - Security UserAccount Password Entries and the registry Hi I would like to know if its possible to build password entries into the disk image file. I have already tried this by adding registry entries, however the password data seems to change on each installation of the platform. is this right? -- Snr. Des. Eng. Northern Hi-Tec Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108005
  - 25
    - unable to delete storage contents from the FATFS profile We are working in mainstone2 kit for setting up a Persistent Data storage with the RAM-Based Registry on a 16MB flash portion mounted with FAT file system .Even though my profile for the storage was created with storage manager showing16MB flash we are unable to do delete the stored files or folder contents in my profile .but i can remove that from remote registry tool.Can u tell me what is the problem with this? Part from this i can't mount a second partiton or dismount the first partition from the storage manger window.So please be kind enough to tell the problem solved. Tag: Microsoft Loopback Adapter- Virtual Machine Network Services Drive Tag: 108003

i am using Windows Vista Home Premium, and working on Windows CE 6.0,
while going through virtual labs, i have noticed that "Microsoft Loopback
Adapter - Virtual Machine Network Services Driver".for Device Emulator
please let me know how can i get that driver,
i already installed virtual PC 2007 on my system , but i am unable to get
the driver installed.
does Vista Home Premium supports Virtual Mahine Network Services Driver.
please let me know how can i install the driver or any third party drivers
available for Device Emulator

Top