Locking flash file system

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - What's the correct way to include SQL Server CE? I asked this question yesterday, perhaps with a bad subject line. I'm including SQL Server CE in my Windows CE.NET 4.2 platform. I do so by adding the SQL Server CE 2.0 component and the SQL Server CE 2.0 .NET Data Provider component. My application runs, but it seems there are some components missing. The Query Analyzer is not installed, and I don't get any text in my error messages (using the SqlCeError Message() method). If SQL Server CE is installed by Visual Studio.NET while debugging an application, the Query Analyzer shows up in the start menu, I get the proper error messages and the SQL CE files are installed nicely in the \windows\sqlce2.0 folder. I thinking I must not have included SQL CE in the platform correctly. What more do I need to do besides add the above components? Thanks, Fred Tag: Locking flash file system Tag: 50437
  - 2
    - enigmatic 'Other Interrupt' message WinCE PB4.20, XScale CPU, custom board, kernel derived from XSCBD1 BSP The WinCE kernel intermittently prints out "Other Interrupt" when there is a lot of USB activity on my system. When I see this message, I see it a lot - other times it is not a problem. The message is associated with starving all user threads for a substantial fraction of a second. I located the code generating this message in the OEMInterruptHandler routine (kernel\HAL\ARM\intxsc1.c) and added to it to determine which interrupts were pending. The answer was none! The host controller is using GPIO1 as an interrupt signal in our system. Has anyone seen this before or have any idea what could be causing it? Thanks, Steve Schumacher Embed, Inc Tag: Locking flash file system Tag: 50433
  - 3
    - Help! Cursor won't go away. I just purchased a web tablet "Advantech mpc100" which uses a 206mhz strongarm processor and operates on windows ce 3 (2000). The machine is incredibly fast and accurate but has one annoyance which I've never seen on the hpc platform... the stinkin' cursor stays on the screen all the time, underneath wherever the stylus points! This might be allright for a desktop pc but is terribly annoying when using a pen/stylus. The yellow-arrow cursor is always right beneath my stylus point. Can anyone tell me how to get rid of the cursor so it behaves like a normal pocketpc or hpc? Thankyou for your help. -Philip Tag: Locking flash file system Tag: 50432
  - 4
    - PCI device is not loaded after warm-boot Hi, I am working on NS/Geode platform. In WinCE.NET 4.2, I got the NIC device not loaded after a warm-boot; while it is OK in WinCE.NET 4.0. After tracking, I found the devices under PCI\Template were all failed, but it works after changing the registry key(NoConfig) from 0 to 1. I just wonder how we decided to use NoConfig=0 or 1. That is, under which situation we should set NoConfig=0 ? And when we should set NoConfig=1 ? Please advise. Tag: Locking flash file system Tag: 50427
  - 5
    - how to specify the location of a file on the device Hi, I want to download the Provisioning.xml file to \Windows directory on my target device. I add this file to the platform in PB4.2 after i build an image with the target BSP. How do i specify that the file should finally reside in the \Windows directory rather than the release directory when the image downloads. Please guide. Thanks, Annie Tag: Locking flash file system Tag: 50423
  - 6
    - Entering PXA255 sleep mode Hi all We have a custom platform that uses thel PXA255 processor. I'm working on implementing power management and I'm presently stumped with intermittent problems in putting the processor to sleep and waking it up again. The process that I'm using is loosely based on the XSC1BD sample. OEMPowerOff gets called and 60-70% of the time, the processor goes to sleep just fine and I can subsequently wake it up. The rest of the time, the code runs down to the point where the PWRMODE register gets written to force the processor to sleep and then the code gets stuck in the "shouldn't get here" loop (I determined this by a toggling a GPIO in the loop) I've checked the errata for the PXA and evidently it's possible to get indeterminate behavior on the GPIO during sleep if the PXBus frequency is set above 133MHz - our pxbus freq is 99.5 MHz. I thought perhaps I was getting an Imprecise Data Abort so I've made sure that the IDAE is clear.. Does anyone have a suggestion? I've been beating my head against this one for awhile Thank Tag: Locking flash file system Tag: 50420
  - 7
    - What's the best way to keep PB up to date? I'm a bit confused by the way that QFE's are published. The web page I have been checking: http://msdn.microsoft.com/embedded/downloads/ce.net/wince/default.aspx has no new updates for CE.NET 4.2. However, I have read about newer QFE's and found them on the Microsoft site by searching. What's the best way to keep up on the updates, QFE's, new help files, etc? -- Frank D. Lombardo Turning Point Technology, Inc. Frank_AT_TurningPointOnline_DOT_com Tag: Locking flash file system Tag: 50418
  - 8
    - APP Still running after Cmd window close PB4.20 PCI Device Driver. I have a Window Console program (i/o loopback) running in the Command Prompt. When I close the Command Prompt, the loopback program is still running. Why is that? How would the loopback program know that the Command Prompt window is closed? Or why doesn't CE call the XXX_Close so that the driver can invalidate the HANDLE to that device causing the loopback program to exit due to a bad device handle? Because of this feature, if I start the another loopback program in another Command Prompt, the loopback program returns an error (Device Busy) because the previous loopback program is still running. JV Tag: Locking flash file system Tag: 50410
  - 9
    - CETK in CE 4.2 Hi, In Windows CE .NET Test Kit window for CE 4.2, there are some red lines for some test. For example, Serial Port. This is for serial port driver test and it is a simple test. Even no serial cable is needed. We usually can do this test in CE 4.0. But now all test cases failed. I am wondering if the red line means we can not do the test. Thank you very much in advance. Tag: Locking flash file system Tag: 50401
  - 10
    - kbhit() How do I emulate the kbhit() function? Running a window console program. Need to know when the 'ESC' key is pressed. JV Tag: Locking flash file system Tag: 50396
  - 11
    - NK Kernel Exception Hi all, I have developed a kind of TCP/IP server in Windows CE.NET 4.2. No we are running "stress" tests over the platform just to assure the correct working of the device. However, during these tests, I have recently faced the following exception in my system: [PID:a7a4bb7a TID:c772ccda 0x879c1800] NK Kernel: DEBUGCHK failed in file d:\mckendric\private\winceos\coreos\nk\kernel\nknormal\..\schedule.c at line 316 Exception 00e Thread=879c1800 Proc=a7a4bb7a 'gwes.exe' AKY=00000211 PC=802415af ESP=143bfa44 EA=00000088 I was connected to the device via Platform Builder using the Ethernet port of the device. So I could see the "Call Stack" that had lead to the exception. The problem is that it seemed that the exception had been originated by a call to PeekMessage() function. > My program creates a pair of threads for each connection that receives. > The test is constantly creating and closing connections. > The source code for each client thread is as follows: DWORD WINAPI ConnectionThreadPseudoCode ( LPVOID pParms ) { MSG stMsg; PeekMessage ( &stMsg, (HWND) INVALID_HANDLE_VALUE, 0, 0, PM_NOREMOVE ); // // Rest of the thread body // } > I just call PeekMessage() at the beginning of the thread's execution, to create the thread's message queue. The source code of the exception part in schedule.c is the following: void AddHandleToList (HANDLE *phList, HANDLE hObj, DWORD dwType) { [...] EnterCriticalSection (&NameCS); if (lpe->hNext = *phList) { LPEVENT lpeNext = (LPEVENT) GetObjectPtrByType (lpe->hNext, dwType); DEBUGCHK (lpeNext); <--- this is the line that gives me the exception in NK lpeNext->hPrev = hObj; } *phList = hObj; LeaveCriticalSection (&NameCS); } Any suggestions on this problem? Best regards, R.B.C. Tag: Locking flash file system Tag: 50388
  - 12
    - Build in evc4, debug in PB 4.2 - How? I've read past posts on this but not found any concrete examples to help. The scenario: I have a complex evc4 workspace (24 inter-dependent projects - dlls/exes + dll driver), I'd like to be able to keep building it in evc4 but to be able to debug in platform builder when needed. This is working to a limited extent. I have added project.bib entries to lift my dlls/exe direct from the evc4 debug directories. I've added project.reg entries to get my driver loaded. I build evc4, make image in pb4.2, download and connect. Questions: 1. Whenever my CEPC runs one of my EXEs, PB always asks for the local EXE location (so it can display the source files when it breaks). Can I stop it asking somehow? i.e. tell it where to find them all in advance. I've tried Tools->Options->Directories->EXEs but that was a long shot. 2. Breakpoints - how can I set breakpoints (it doesn't know the source is part of the project)? Is there an equivalent to the MSVC "Additional DLLs" concept to make PB42 aware of the source code I wish to debug? Adding "int 3"s would I suppose work but is obviously not ideal. As you can see, I am trying to avoid having to maintain two workspaces (one in evc and PB). Thanks in advance, Martin Tag: Locking flash file system Tag: 50387
  - 13
    - out of memory error Dear All, I am getting the following errors during Windows CE 4.2 boot up on an ARM Based Platform. stub_LoadLibraryW (mydll) : Failed with error 0x0000000e stub_CreateProcessW(myexe): Failed with error 0x0000000e What are the possible reasons and solutions for these errors? Note:We have enough physical memory. Regards sinu Tag: Locking flash file system Tag: 50386
  - 14
    - GWES problem Hi all, The GWES has an exception error, when the horizonal and vertical scrllbar is gray. Which part of the diaplay driver that I have to modify? Thanks. ========================================================= 784331 PID:eea0f02 TID:158dfa2 AKY=00000111 PC=02e899f9 ESP=121be5d8 EA=00000000 784331 PID:eea0f02 TID:158dfa2 Exception 00e Thread=815669f8 Proc=0eea0f02 'gwes.exe' 784331 PID:eea0f02 TID:158dfa2 AKY=00000111 PC=02e899f9 ESP=121be5d8 EA=00000000 784331 PID:eea0f02 TID:158dfa2 Exception 00e Thread=815669f8 Proc=0eea0f02 'gwes.exe' 784331 PID:eea0f02 TID:158dfa2 AKY=00000111 PC=02e899f9 ESP=121be5d8 EA=00000000 784780 PID:eea0f02 TID:158dfa2 Exception 00e Thread=815669f8 Proc=0eea0f02 'gwes.exe' 784780 PID:eea0f02 TID:158dfa2 AKY=00000111 PC=02e899f9 ESP=121be5d8 EA=000003e0 784781 PID:eea0f02 TID:158dfa2 Exception 00e Thread=815669f8 Proc=0eea0f02 'gwes.exe' 784781 PID:eea0f02 TID:158dfa2 AKY=00000111 PC=02e899f9 ESP=121be5d8 EA=000003e0 784781 PID:eea0f02 TID:158dfa2 Exception 00e Thread=815669f8 Proc=0eea0f02 'gwes.exe' 784781 PID:eea0f02 TID:158dfa2 AKY=00000111 PC=02e899f9 ESP=121be5d8 EA=000003e0 784782 PID:eea0f02 TID:158dfa2 Exception 00e Thread=815669f8 Proc=0eea0f02 'gwes.exe' 784782 PID:eea0f02 TID:158dfa2 AKY=00000111 PC=02e899f9 ESP=121be5d8 EA=000003e0 784793 PID:eea0f02 TID:158dfa2 Exception 00e Thread=815669f8 Proc=0eea0f02 'gwes.exe' 784793 PID:eea0f02 TID:158dfa2 AKY=00000111 PC=02e899f9 ESP=121be5d8 EA=00000024 Tag: Locking flash file system Tag: 50381
  - 15
    - Windows CE.NET Bluetooth Hi All, I am currently working on a program (for CE.NET) which it can retrieve the bluetooth device name of my own device. However, have been search through the help file and web sites to look into this, so far not much luck. Anyone knows how to do it? Please help. Is the bluetooth name same to the device name in the control panel system properties? Thanks... Best Regards, Candy Tag: Locking flash file system Tag: 50380
  - 16
    - Building Win CE driver for IntelXScale Hi All, Am trying to build a Win CE driver uing PB(platform builder). I want to set the processor type of the driver as Intel Xscale. But I don't know how to configure the PB for this particular processor. 1. Is it possible to build a driver by setting "processor type Intel Xsacle" using platform builder? 2. Do I have to purchase any BSPs from Intel for this particular processor support? 3. If possible, 2.1 Please detail how to configure PB. 2.2 Is it possible with evaluation version of PB? regards Bijesh VM Tag: Locking flash file system Tag: 50377
  - 17
    - Building CE Driver for IntelXscale processor Hi All, Am trying to build a installable driver for iPAQ PDA which is based on Intel Xscale processor (iPAQ 2215). I would like to know 1. How to configure the PB for building driver for Intel Xscale processor? 2. Is there any command line arguments for buiding. 3. Whether I have to purchase the BSP for IntelXscale from intel, Is it available with PB 4.2 evaluation version? regards Bijesh VM * PB: platform builder 4.2 Tag: Locking flash file system Tag: 50376
  - 18
    - Mapping large PCMCIA common memory in NDIS miniport Dear all I'm porting PCMCIA wireless LAN adapter to Windows CE 4.2 on Samsung SMDK2410 boar Since, our PCMCIA adapter use large common memmory about 2.25MB I tried to map common memory space in MiniportInitialize() with NdisMMapIoSpace() function like this ------------------- Status = NdisMMapIoSpace( (PVOID *)(&(pAdapter->pMemVirtual)) pAdapter->MiniportAdapterHandle pAdapter->MemBaseAddr pAdapter->MemSpaceSize); // MemSpaceSize = 0x24000 ------------------ but, this code generates OUT_OF_RESOURCE error I suppose that the reason of error is the memory size is too large Is it possible to map such large size of PCMCIA common memory If possible, how can I do that Thanks in advance... Tag: Locking flash file system Tag: 50373
  - 19
    - how to make the configuration for the Sandgate platform HI My hardware platform is XCALE255 without SA1111, so I want to configure the platform to be a Sandgate platform But the default setting is Lubbock. How can I set my Platform builder to do that Thanks Tag: Locking flash file system Tag: 50372
  - 20
    - Help me on Windows XP Embedded installation. Dear all, I have a problem installing the XPe with SP1. I have problem performing the database setup after I have installed the tools and the database engine. The error message is "This installation package cannot be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows installer package". How can I overcome this problem? Thanks in advance, PCB Tag: Locking flash file system Tag: 50365
  - 21
    - Debugging on the PDA. Is it possible? Dear TechGurus How should I debug my code on the actual PDA? For example, I have a HP Ipaq PDA and have a active synch connection to the Desktop. The code is present in the EVC++ 3.0 running on the desktop Provided I have a debug build, is there a way to debug my code(step in)? My processor is ARM.. Is it possible to debug the Application and the Driver DLL If its a big thing which u may hate typing, pls get me the link so that I can browse from there Cheer Ram Tag: Locking flash file system Tag: 50363
  - 22
    - Is all source code available in cepb42 ? hi, if someone can tell me that All source code is available in cepb42 including core.dll, gwe.dll and the kenerl code. thanks for help. Tag: Locking flash file system Tag: 50362
  - 23
    - Localization G'day All, I have a question regarding localization of a WinCE 4.2 platform. We are developing a WinCE platform where installed applications will not be using any of the standard Windows Interfaces (eg Shell, file open close etc), applications will manage all interfaces. The installed application will need to support multiple lanaguages so we need to provide full font support etc. Most likely a seperate build of the application will be done for each target language. My question is: Do we need to include all the target locales in this situation? I looks like these just provide language translation of Standard Shell UI and System Apps etc? Phil Tag: Locking flash file system Tag: 50357
  - 24
    - Copying bigger files from SD card is not happening Hi All I am using PB 4.2 I am using a 64MB Sandisk SD card (uses 8 bit CISC controller within the card I am not able to copy files above 13 MB from SD card to desktop using active sync In the receive part of code, we are checking status register to ensure data is ready in FIFO. Then, I am copying data from FIFO. The above operations(check status reg and copy from FIFO) happens in a loop until we copy everything (whole size). While file copy reaches 13 MB, status register gives "RECEIVE TIMEOUT" . The above issue happens with this particular card only I have one more Sandisk card (uses 32 bit RISC controller within the card). Using this card I can copy the files as big as possible. This is consistently happening Any solution Thank Prasanna Tag: Locking flash file system Tag: 50356
  - 25
    - why msn don't connect at WinCE net 4.2? When I try connect msn,my device display error "Signig in to.NET Messenger Service failed because the service is not compatible with this version of the program". Tag: Locking flash file system Tag: 50355
- Next
  - 1
    - PCMCIA with a CEPC Q1 Any recommended "off the shelf" cards for PCMCIA on a CEPC The cards typically come with WiFi network cards but none of the ones I have have the required chipset TI1250 (Texas Instaruments) or i82365-compatible (as in PB4.2 Q2 Looking at PCMCIA drivers on MSDN at http://msdn.microsoft.com/library/default.asp?url=/library/en-us/wceddk40/html/cxconPCCardDriverSupport.as There are drivers for 3 PCMCIA cards but when I look on the directory (Platform) there are no such subdirectories As file serach of %winceroor% finds nothing Tag: Locking flash file system Tag: 49349
  - 2
    - TDI support in Win CE 4.x? Hi all, I am planning to implement TDI based firewall in Windows CE 4.x. I have been trying to figure out if there are any support for TDI in Win CE. Until now I wasnt able to find any conclusive evidence of it. I'd appreciate if anyone can tell me. Moreover I shall be grateful if there is TDI support, if anybody can tell me where I can find references to the supported TDI Apis' for CE. thanks a lot in advanc Tarik Tag: Locking flash file system Tag: 49346
  - 3
    - About the Audio SoftwareMixer [HKEY_LOCAL_MACHINE\Audio\SoftwareMixer] "SampleRate"=dword:AC44 "Buffers"=dword:4 "BufferSize"=dword:800 "EnableLowPassFilter"=dword:1 "Priority 256"=dword:dc I found some difference between 'MediaPlayer' and 'PlaySound API'. I measured the analog audio output signals, playing the same .wav file by two ways. In MediaPlayer, the signal was smooth. But, in PlaySound API, it was like staircase. I guess the reason is LowPassFilter of SoftwareMixer. So, I changed the registry value "EnableLowPassFilter" is zero. As expected in MediaPlayer, the signal was not smooth and like staircase. I want to make the sound of PlaySound API is smooth. How can I use the 'PlaySound API' with Audio Software Mixer like MediaPlayer ? Please.. Tag: Locking flash file system Tag: 49344
  - 4
    - SDIO hardware attachment driver/software I am in process of designing a piece of hardware attachment to be used with an iPaq PocketPC through its SD slot. The hardware will follow SD IO specifications. I want this hardware to look as a bank of 4 8-bit read/write registers. Applications using this hardware control it by reading and writing these registers. An interrupt service routine will be a big plus. I really appreciate it if you can point me to the right direction. I have googled around and searched Microsoft site with not much success. Here are few questions if you enlighten me please. 1- Is it neccessary to write a driver to access this device? Is it possible for the application to use low level drivers already in the iPaq to access the SD slot without the need for a dedicated driver? 1- What is the appropriate software tool to create a driver to access a SD IO device attached to SD slot of an iPaq? 2- If Platform Builder is the right tool, where do you get it? In Microsoft site I can find articles mentioning the Platform Builder, but I cannot find a product named Platform Builder. Did they change the name? 3- Are there any articles or sample code showing SD IO access in a PocketPC? Thanks in advance Tag: Locking flash file system Tag: 49343
  - 5
    - can I distribute loadcepc with my NK.BIN? Are there licensing restrictions on distributing loadcepc with my NK.BIN My NK.BIN will reside on the boot parttion of a CEPC and I currently use loadcepc to load it. Should I be using some other loader Thanks Mik Tag: Locking flash file system Tag: 49337
  - 6
    - Windows CE ROM Image Builder Receiving these warning messages. How can I fix it or should I not worry about them. myIsr.dll is a loadable ISR ad mydriver.dll is of course, my CE Driver. Using old fixup style in module mydriver.dll Using old fixup style in module myIsr.dll John Tag: Locking flash file system Tag: 49336
  - 7
    - suspend doesn't work after RDP session Hi, I am running Win CE 4.2 on a SH3 device. There is button driver in the device. When click one of the button, the device will go to suspend. The code is like this keybd_event( VK_OFF, 0, KEYEVENTF_SILENT, 0 ); But if I run RDP, then clicking that button won't go to suspend. If I click Start on the bottom left of the device, then click suspend, it will work. It looks like if there is a RDP session, the virtual key VK_OFF doesn't work. Is there anyone know any information about this problem? By the way, it exists on Win CE 4.0 too. Thanks a lot Rosalind Tag: Locking flash file system Tag: 49332
  - 8
    - WinCe WebServer Hi, Can anyone tell me if there is/or where to get software to use a winCe based handheld wit intel Xscale proc as an Webserver Preferebly Php and stuf like that. Afz. Rudy Tag: Locking flash file system Tag: 49326
  - 9
    - Activesync via USB on a CEPC On an Intrynsyc XScale board, I can easily run activesync with development machine That board has a USB Client which allows it to connect to the development PC and run activesync How do you setup USB on a CEPC to activesync with a PC, given that they are both USB hosts? Tag: Locking flash file system Tag: 49316
  - 10
    - RAS Hi all I use Wince4.1 To use RAS, I use "COM1:". But, Dial-up Connection is not connected at RAS. In other word, threre is no dialtion Is it impossible to use COM1 for RAS Connection? I modified debug.c to not use debug port Plesase some advices Thanks Tag: Locking flash file system Tag: 49314
  - 11
    - BlueTooth driver in release and debug Hi all, I'm using the Mitsumi WML-C20 bluetooth controller with BCSP. This is working correctly in a debug image but not in a relase image. When I replace the btd.dll relase version in the release image with the btd.dll debug version the image works correctly. Any suggestions what might cause this problem and can also solve this (compiler optimisation problem....)? -- Jeroen Kratz Chess iT Tag: Locking flash file system Tag: 49313
  - 12
    - About Build Hi all, I use ce4.1 I tried to build(Build Selected features) "Standard Shell". But, Build is not completed The following is error message Error PB2504: Error spawning #(C:\WINCE410\private\wceshellfe\jupiter\Server\explorer\res)build.ex I modified "C:\WINCE410\PRIVATE\WCESHELLFE\JUPITER\SERVER\CESHELL\host2.cpp" I wonder that it is impossible to build "C:\WINCE410\PRIVATE\..." Thanks Tag: Locking flash file system Tag: 49312
  - 13
    - Keep-Alive Hi all, I want to implement the Keep-Alive functionality on a Thin Client device connected to a Terminal Server. As I know it is a standard feature of the TCPIP protocol (there're also registry settings for it), but it is disabled by default. Does someone know how to make it work? Must be enabled by a custom application? How? Thank you in advance, Gabor Varga Tag: Locking flash file system Tag: 49311
  - 14
    - what is the mean of instruction "MRA"MAR" This is a multi-part message in MIME format. ------=_NextPart_000_0007_01C402C2.7E1F0690 Content-Type: text/plain; charset="gb2312" Content-Transfer-Encoding: quoted-printable =BF=D5=B0=D7hi,all h:\wince410\platform\intel_dbpxa250\kernel\hal\ARM\cpregxsc1.s(291) = warning : A0241: Instruction mra not supported for -cpu "-arch 4t" h:\wince410\platform\intel_dbpxa250\kernel\hal\ARM\cpregxsc1.s(331) = warning : A0241: Instruction mar not supported for -cpu "-arch 4t" ------=_NextPart_000_0007_01C402C2.7E1F0690 Content-Type: text/html; charset="gb2312" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD><TITLE id=3DridTitle>=BF=D5=B0=D7</TITLE><BASE=20 href=3D"file://C:\Program Files\Common Files\Microsoft = Shared\Stationery\"> <META http-equiv=3DContent-Type content=3D"text/html; charset=3Dgb2312"> <STYLE>BODY { MARGIN-TOP: 25px; FONT-SIZE: 10pt; MARGIN-LEFT: 25px; COLOR: #000000; = FONT-FAMILY: =CB=CE=CC=E5, =BA=DA=CC=E5 } P.msoNormal { MARGIN-TOP: 0px; FONT-SIZE: 10pt; MARGIN-LEFT: 0px; COLOR: #ffffcc; = FONT-FAMILY: =BA=DA=CC=E5, "=CB=CE=CC=E5" } LI.msoNormal { MARGIN-TOP: 0px; FONT-SIZE: 10pt; MARGIN-LEFT: 0px; COLOR: #ffffcc; = FONT-FAMILY: =BA=DA=CC=E5, "=CB=CE=CC=E5" } </STYLE> <META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR></HEAD> <BODY id=3DridBody bgColor=3D#ffffff background=3D"Blank Bkgrd.gif"> <DIV>hi,all</DIV> <P>h:\wince410\platform\intel_dbpxa250\kernel\hal\ARM\cpregxsc1.s(291) = warning :=20 A0241: Instruction mra not supported for -cpu "-arch=20 4t"<BR>h:\wince410\platform\intel_dbpxa250\kernel\hal\ARM\cpregxsc1.s(331= )=20 warning : A0241: Instruction mar not supported for -cpu "-arch=20 4t"<BR></P></BODY></HTML> ------=_NextPart_000_0007_01C402C2.7E1F0690-- Tag: Locking flash file system Tag: 49308
  - 15
    - Btpair.exe relies on BTHLINK sample?? This is a multi-part message in MIME format. ------=_NextPart_000_002F_01C40227.178C0950 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable Hello, The help file of platform builder said: "The compiled sample generates a Btpair.exe application. It relies on = the BTHLINK sample device driver that needs to be compiled and copied to = the device." However, I can compile the Btpair project without linking Bthlink.lib, = and I did not find btpair.c call any function related to Bthlink(for = example RegisterDevice(L"BTL", 1, "bthlink.dll", NULL) that is mentioned = in help file). Could anybody explain it? If need I modify the sample = code? --=20 Thanks!! Gordon ------=_NextPart_000_002F_01C40227.178C0950 Content-Type: text/html; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Dwindows-1252"> <META content=3D"MSHTML 6.00.2737.800" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY> <DIV><FONT face=3DArial size=3D2>Hello,</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>The help file of platform builder=20 said:</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>"The compiled sample generates a = Btpair.exe=20 application. It relies on the BTHLINK sample device driver that needs to = be=20 compiled and copied to the device."</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>However, I can compile the Btpair=20 project without linking Bthlink.lib, and I did not find btpair.c = call any=20 function related to Bthlink(for example RegisterDevice(L"BTL", 1,=20 "bthlink.dll", NULL) that is mentioned in help file). Could=20 anybody explain it? If need I modify the sample code?</FONT></DIV> <DIV><BR><FONT face=3DArial size=3D2>-- <BR></DIV></FONT> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>Thanks!!<BR>Gordon</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV></BODY></HTML> ------=_NextPart_000_002F_01C40227.178C0950-- Tag: Locking flash file system Tag: 49307
  - 16
    - PCI interrupt sharing Hi all, I'm porting on a pretty standard PCI device driver for CE 4.2, that originated in 2.12 or sometime back then. Currently, the driver uses InitializeInterrupt() to set up being notified of interrupts. It requests a SYSINTR_ value as the OEM index plus the IRQ number. Obviously, this fails if there are multiple devices that have the same IRQ. I see that the PCI bus requests a unique SYSINTR from the kernel and provides it in the registry. Will it be sufficient to use that value? What if other devices also use the same IRQ, perhaps a NIC that I don't have the sources of? Much of the documentation implies that to share interrupts, it is necessary to rely on installable ISR handlers, such as GIISR.dll. I can't tell whether I really need to worry about this or not. My quick glance says the source appears to do nothing but clear the interrupt, and not call notify my driver that it ever happened. So my questions are: Do I have to load an installable ISR within my PCI driver? Or does the PCI bus driver handle that for me? Or is it not related? If an installable ISR is needed, do I still use InitializeInterrupt() to associate an event with the unique SYSINTR? Thanks for any help and clarifications, -E. Nelson Tag: Locking flash file system Tag: 49302
  - 17
    - CETK clientside.exe fails Hi, I am trying to get the Windows CE Test Kit working but to no avail. I have my host PC connected to the target over ethernet. I used ethernet boot to download the image. I have added the Windows CE test Kit to the Features list. Platform builder and the Windows CE test Kit are running on the host PC. Then from the CE shell I have entered the command s clientside.exe /i=aaa.bbb.ccc.ddd /p=5555 The debug message warns that "AUTORAS:: Reg does not contain RasEntry value!!!", I checked autoras.c, the error message shows that autodial cannot find the phonebook entry in [HKLM\Comm\AutoRas\RasEntry]. Do I have to add this registry entry to make it work and how to add that? Thank you so much! Alex 2548278 PID:da5de23e TID:da359526 0x9a311618: RELFSD: Opening file clientside.exe from desktop 2548921 PID:da37464a TID:da359526 0x9a311618: InitSharedHeap: 46000000 0 c 2548922 PID:da37464a TID:da359526 0x9a311618: InitSharedHeap: return 46000050 2548926 PID:da37464a TID:da359526 0x9a311618: >>> Loading module clientside.exe at address 0x10010000-0x10020000 Loaded 'D:\WINCE420\PUBLIC\WPC\RELDIR\BVDMAIN-ARMV4IDEBUG\CLIENTSIDE.EXE', no matching symbolic information found. 2548960 PID:da5de23e TID:da359526 0x9a311618: RELFSD: Opening file wcetk.txt from desktop 2549124 PID:7a4108e6 TID:ba3ddfb6 0x9a3bb400: WINDOWCREATED: 0 2549256 PID:3a5b2276 TID:da359526 0x9a311618: AUTORAS:: Reg does not contain RasEntry value!!! 2549257 PID:3a5b2276 TID:da359526 0x9a311618: AUTORAS:: ARSDecideDial() returns: [DO NOT DIAL] 2549257 PID:3a5b2276 TID:da359526 0x9a311618: AUTORAS:: Not dialing.. 2549259 PID:3a5b2276 TID:da359526 0x9a311618: AUTORAS:: IOCTL_ARS_DIAL returns [Succesfully] 2549261 PID:da37464a TID:da359526 Internal Clientside error while trying to connect to the server. Clientside will now exit Tag: Locking flash file system Tag: 49301
  - 18
    - RAS to Linux I'm still having PPP troubles.. I manage to get the my CE target device to go through the initialization of a PPP connection with a Linux box (although I still cant connect via serial to work on my Windows 2000!)... however after the targets assigned IP address is sent to it, and it acks this IP address the Win CE device claims it gets disconnected... but the linux box still thinks the connection is going! Any idea Thanks Tag: Locking flash file system Tag: 49300
  - 19
    - RNDIS/UDC XSC1BD driver Hi All, I have managed to link and include the common RNDIS MDD driver with my PXA255 UDC PDD Driver but I seem to be getting errors. I'm assuming (because of previous posts) that this is due to the IOCTL_HAL_TRANSLATE_IRQ condition not being implemented in the XSC1BD BSP. When I check my debug log (after I get a first time exception) is: 4294769168 PID:81c6a782 TID:81c8ef7a 0x81c6a198: RndisMini: IRQ -> SYSINTR translation failed 4294769171 PID:81c6a782 TID:81c8ef7a 0x81c6a198: <<< Unloading module xsc_udc_rndis.dll at address 0x01DD0000- 0x01DE7000 I have read in previous posts that I can specify the Sysinterrupt in platform.reg like this: [HKEY_LOCAL_MACHINE\Comm\RndisMini1\Parms] "BusNumber"=dword:0 "BusType"=dword:0 "Sysintr"=dword:30 I use the number thirty cause that is the value that SYSINTR_USB_CLIENT resolves to: #define SYSINTR_USB_CLIENT (SYSINTR_FIRMWARE+14) But I still get the same error. Do I have to implement IOCTL_HAL_TRANSLATE_IRQ (OEMTranslateIrq) or have I misunderstood the value of "Sysintr" in my registry? Cheers, Andrew Tag: Locking flash file system Tag: 49299
  - 20
    - FlushDCache CE4.2 use OEMCacheRangeFlush to replace FlushDCache, FlushICache in CE 4.0 I saw there is this funciton which has been implemented in \WINCEROOT\publiccommon\oaks\csp directory by Microsoft, so I did nothing. but when I compile the Windows CE OAL in CE 4.2, still got the following message error LNK2019: unresolved external symbol OEMCacheRangeFlush referenced in function KernelFindMemor error LNK2001: unresolved external symbol OEMCacheRangeFlus Why is that Tag: Locking flash file system Tag: 49298
  - 21
    - debug serial port Hi I have an application that uses 2 serial ports on a PXA255(BTUART and FFUART) under WinCE4.10. I now have a need to convert the FFUART back to a debug port to spit out some debug messages. The only way I can get the system to boot up with the debug port functioning is to remove the serial driver which sets BSP_NOSERIAL=1. If I do this, however, my application cannot use the BTUART. Is there a way to have one serial port as a debug port and the other available to my application simultaneously? Currently I can only do one or the other Thanks Don Tag: Locking flash file system Tag: 49297
  - 22
    - What Happened to the QFEs??? Am I missing something, or did the CE.NET QFEs get removed from the downloads area of the MS web site? The only ones I can find are some old quarterly QFEs on the regular embedded site - nothing newer than Q3 of last year. This info is at http://www.msdn.microsoft.com/embedded/downloads/ce.net/wince/default.aspx There's now a reference to the OEM Embedded site, which is restricted and requires registration. Are the QFEs no longer publicly available? -- Dean Ramsier - eMVP Accelent Systems http://www.accelent.com Tag: Locking flash file system Tag: 49295
  - 23
    - remove drivers from cloned BSP Hi, What's the best way to remove a driver from a platform? From the FeatureView, I can't simply delete the driver, it's just come back. I tried deleting it from the cloned .cec file(that created the platform/project) first, then goback to PB, then seems to be able to do it. Is this safe; the correct way to do it. (assume I decided that I don't needed that driver after I have cloned it and used it for a while;for the next prototype) Is this how the cloning process work when it ask what driver you want to want in the cloned BSP? Tag: Locking flash file system Tag: 49293
  - 24
    - Re: PCMCIA with PCI card on CEPC Chris, Did you able to make it work ? I have same problem now. > Date: Thu, 17 Apr 2003 14:56:18 -0500 > From: Chris Edgington > Subject: Re: PCMCIA with PCI card on CEPC > > Figured it out .... examining the TI1250.reg file reveals that my Ricoh > chipset's PCI device ID is 0x0475, whereas the .reg file is looking for > 0x0476. Hopefully I can get my device to work, even though its an > earlier rev. Changing the reg file results in the being pcmcia.dll > loaded, and I can now set breakpoints and see debug messages from it. > > Thanks for reading and responding to my messages. > > Later, > -Chris > Tag: Locking flash file system Tag: 49291
  - 25
    - Serial port This is a multi-part message in MIME format. ------=_NextPart_000_0034_01C401F9.98459D00 Content-Type: multipart/alternative; boundary="----=_NextPart_001_0035_01C401F9.98459D00" ------=_NextPart_001_0035_01C401F9.98459D00 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable BlankMy CEPC only has 1 COM port and I use PB4.2. I made a program send = data to COM1, but nothing send to COM1. But if I open "System" under control panel, something send to COM1. I added "Serial port support" to platform. Is there anything I need to = take care of, like platform setting.... Thanks so much! ------=_NextPart_001_0035_01C401F9.98459D00 Content-Type: text/html; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD><TITLE id=3DridTitle>Blank</TITLE> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Dwindows-1252"><BASE=20 href=3D"file://C:\Program Files\Common Files\Microsoft = Shared\Stationery\"> <STYLE>BODY { MARGIN-TOP: 25px; FONT-SIZE: 10pt; MARGIN-LEFT: 25px; COLOR: #000000; = FONT-FAMILY: Arial, Helvetica } P.msoNormal { MARGIN-TOP: 0px; FONT-SIZE: 10pt; MARGIN-LEFT: 0px; COLOR: #ffffcc; = FONT-FAMILY: Helvetica, "Times New Roman" } LI.msoNormal { MARGIN-TOP: 0px; FONT-SIZE: 10pt; MARGIN-LEFT: 0px; COLOR: #ffffcc; = FONT-FAMILY: Helvetica, "Times New Roman" } </STYLE> <META content=3D"MSHTML 6.00.2800.1106" name=3DGENERATOR></HEAD> <BODY id=3DridBody style=3D"COLOR: #000080; FONT-FAMILY: Verdana" = bgColor=3D#ffffff=20 background=3Dcid:002f01c40223$81127d40$74bf2cd8@3ComC> <DIV>My CEPC only has 1 COM port and I use PB4.2. I made a program send = data to=20 COM1, but nothing send to COM1.</DIV> <DIV>But if I open "System" under control panel, something send to = COM1.</DIV> <DIV> </DIV> <DIV>I added "Serial port support" to platform. Is there anything I need = to take=20 care of, like platform setting....</DIV> <DIV> </DIV> <DIV>Thanks so much!</DIV> <DIV> </DIV> <DIV> </DIV> <DIV> </DIV> <P> </P></BODY></HTML> ------=_NextPart_001_0035_01C401F9.98459D00-- ------=_NextPart_000_0034_01C401F9.98459D00 Content-Type: image/gif; name="Blank Bkgrd.gif" Content-Transfer-Encoding: base64 Content-ID: <002f01c40223$81127d40$74bf2cd8@3ComC> R0lGODlhLQAtAID/AP////f39ywAAAAALQAtAEACcAxup8vtvxKQsFon6d02898pGkgiYoCm6sq2 7iqWcmzOsmeXeA7uPJd5CYdD2g9oPF58ygqz+XhCG9JpJGmlYrPXGlfr/Yo/VW45e7amp2tou/lW xo/zX513z+Vt+1n/tiX2pxP4NUhy2FM4xtjIUQAAOw== ------=_NextPart_000_0034_01C401F9.98459D00-- Tag: Locking flash file system Tag: 49290

Is there a way of using the flash file system but securing it from puibli access? We don't want users to access the flash file system over ActiveSync.

Top

Re: Locking flash file system by Seung

Seung
Fri Apr 02 10:38:00 CST 2004

You can write a file system filter (see examples in =

\common\oak\drivers\fsd\fsdspy).

On Thu, 1 Apr 2004 16:06:10 -0800, Parsley <tisaacson@navman.com> wrote:=

> Is there a way of using the flash file system but securing it from =

> puibli access? We don't want users to access the flash file system ove=
r =

> ActiveSync.

-- =

Seung Yi
Chief Technologist
Codetelligence, Inc.
Web : www.codetelligence.com

Top