Localizing ceshellbase.rc in ceshell

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - ipconfig issue on pppoe Dear Sir. We are using ce 4.2 on x86 CPU. When we tried to connect the network using PPPoE(ADSL), it was very well connectted network such as internet, messenger. But we execute ipconfig program on ce 4.2, it didn't find IP configuration about the ADSL. It was just displayed LAN information. How can we find the ADSL(PPPoE) ip configuration? -- Thanks., -------------------------------- Skyblue Ahn /SW Team Manager Atrium C&I Co., Ltd. Tel: 82-2-2122-3111 Fax: 82-2-761-3541 Mobile: 82-18-222-2244 Mail : skyblue@atriumcni.com skyblue@prumail.co.kr ------------------------------- Tag: Localizing ceshellbase.rc in ceshell Tag: 48223
  - 2
    - How can I change reconnection delay with Wireless LAN Hello. I'm using Win CE .NET 4.1 . There's a problem with wireless lan connection. Once it lose the connection( going far from Acess Point ), it takes about 1~2 minutes to reconnect after I return to the AP. Can I remove this delay? ( 1 minute is too long. ) thank you. Tag: Localizing ceshellbase.rc in ceshell Tag: 48217
  - 3
    - tooltalk.dll Anyone could tell me where can I find the tooltalk.dll for CETK? Tag: Localizing ceshellbase.rc in ceshell Tag: 48215
  - 4
    - XSC1BD serial driver Hi All, I'm a little confused about the Serial driver in the XSC1BD BSP. I have placed debug statements in the following functions: OEMInterruptEnable() OEMInterruptDisable() OEMInterruptHandler() OEMInterruptDone() I added the USB Client and Serial drivers to my Platform and I appear to be getting receive interrupts from USB but not from Serial. I also noticed that the Serial driver code never calls the "InterruptInitialize()" function. During initialisation (at startup), from USB I enter the following functions: **************OEMInterruptEnable: USB CLIENT. **************OEMInterruptHandler: INTC_USB **************OEMInterruptDone: SYSINTR_USB_CLIENT. **************OEMInterruptHandler: INTC_USB **************OEMInterruptDone: SYSINTR_USB_CLIENT. But from serial (FFUART), I only get: **************OEMInterruptEnable: SYSINTR_SERIAL. **************OEMInterruptDone: SYSINTR_SERIAL. How come a serial interrupt isn't automatically created when "OEMInterruptEnable()" is called like for the USB driver? Why doesn't the XSC1BD call the "InterruptInitialize()" function? How does the "OEMInterruptDone()" function get called without ever entering the "OEMInterruptHandler()" function? I can transmit out of the serial port but I cannot receive any. Any help would be appreciated. Cheers, Andrew Tag: Localizing ceshellbase.rc in ceshell Tag: 48214
  - 5
    - ceplayer crash on wince 4.2 When connecting to an AV streaming website and playing the stream in CEPlayer, a data abort exception occurs causing CEPlayer to close down. Data Abort: Thread=83ab6424 Proc=820e6fb8 'ceplayer.exe' AKY=00000021 PC=02c8c8c4 RA=00000066 BVA=0c06e242 FSR=00000003 I have installed second and third quarter's QFE for wince4.2 Tag: Localizing ceshellbase.rc in ceshell Tag: 48213
  - 6
    - CardAccessConfigurationRegister returns 0x1E Hi al I'm writing NDIS PCMCIA miniport driver on Platform builder 4.2 On my MiniportInitialize() function I registered PCMCIA client using CardRegisterClient() function and later, I access configuration registers in my device using CardAccessConfigurationRegister() function However, when I try to write to configuration register using CardAccessConfigurationRegister function, the function returns error 0x1E(CERR_IN_USE) - read configuration registers return successfully I tested other PCMCIA service functions such as CardReleaseConfiguration(), CardResetFunction(), an those functions were returned with error 0x1E What's the problem? Here's fraction of my code ------------------------------------- NDIS_STATUS SwldInitialize(... ................. NdisOpenConfiguration() . .................. NdisMQueryAdapterResources( .................. NdisMSetAttributeEx( NdisMRegisterIoPortRange( RegParms.fAttributes = CLEINT_ATTR_IO_DRIVER CLIENT_ATTR_NOTIFY_EXCLUSIVE CLIENT_ATTR_NOTIFY_SHARED RegParms.fEventMask = EVENT_MASK_CARD_DETECT EVENT_MASK_POWER_MGMT RegParms.uClientData = NULL g_hClient = CallCardServices(CardRegisterClient)( NotificationEvent, &RegParms ); <- Returns Client handl .... NdisMMapIoSpace(...) CallCardServices( CardAccessConfigurationRegisters ) g_hClient g_hSocket CARD_FCR_WRITE 0x00 &CorValue ); <- It returns error 0x1 ... / // Callback function for CardRegisterClien / STATU NotificationEvent ( CARD_EVENT CardEvent CARD_SOCKET_HANDLE hSocket PCARD_EVENT_PARMS pCardEventParms CARD_WINDOW_HANDLE hWindow = NULL CARD_WINDOW_PARMS CardWinParms STATUS stResult switch( CardEvent case CE_CARD_INSERTION DEBUGMSG( ZONE_INIT (TEXT("SWLD60: NotificationEvent:CE_CARD_INSERTION\r\n") ) ) DEBUGMSG( ZONE_INIT (TEXT("SWLD60: Card %d:%d - PNP ID = %s\r\n"), hSocket.uSocket, hSocket.uFunction, pCardEventParms->Parm1) ) break case CE_REGISTRATION_COMPLETE DEBUGMSG( ZONE_INIT (TEXT("SWLD60: NotificationEvent:CE_REGISTRATION_COMPLETE\r\n") ) ) / // Save card socket handl / g_hSocket.uSocket = hSocket.uSocket g_hSocket.uFunction = hSocket.uFunction DEBUGMSG( ZONE_INIT (TEXT("SWLD60: CARD_SOCKET_HANDLE Socket %d Function %d\r\n") g_hSocket.uSocket, g_hSocket.uFunction) ) / // Reset Card socke / stResult = CallCardServices(CardResetFunction)( (CARD_CLIENT_HANDLE pCardEventParms->Parm1 hSocket ); <-- this function also return 0x1 DEBUGMSG( ZONE_DEBUG (TEXT("SWLD60: CardResetFunction returns 0x%08X[%d]\r\n") stResult, stResult ) ); break } // switc return CERR_SUCCESS } // NotificationEven Thanks. Tag: Localizing ceshellbase.rc in ceshell Tag: 48211
  - 7
    - windowsce.net application error Hi, When i try to download the VOIPPhone sample application onto the X86 emulator with the transport type set to UDP i get the following debug error: CRTCProfile::CheckAndSetUDPFlags - can not support authFlag(8) in Win9x or UDP CRTCProfile::InitializeFromString - SetUDPFlagsAndValidateProfile failed. CRTCClient::CreateProfile - InitializeFromString failed 0x80ee007e VoIPMgr::Initialize - FAILS. hr = 0x80ee007e -VoIPMgr::Initialize NATHELP:0:62e9fa3a:62eebfbe:CleanupProcessGlobals: ************************************************************ NATHELP:0:62e9fa3a:62eebfbe:CleanupProcessGlobals: ASSERTION FAILED! File: d:\mckendric\private\directx\dplay\dpnathlp\dpnhupnp\wince\..\dpnhupnpdllmain.cpp Line: 554: ! "DPNHUPNP.DLL unloading without all objects having been released! The caller's Direc ************************************************************ The download hangs and it asks for the path for a file " dndbg.cpp". There is no such file anywhere. I dont have a clue of where this error is coming from. If someone can throw some light on this issue i will be grateful. Thanks, Annie Tag: Localizing ceshellbase.rc in ceshell Tag: 48210
  - 8
    - how to access the File System(FAT32) from the Wince System Dear all: I used the third part device to copy the NK.bin to the PC machine,and the Wince can be runed on it. and now I have a file(it haven't include into the NK.bin,but it's on the target PC machine),now,I wantto know how to set it into the wince OS-RAM file system,How shall I do? thanks. Carol Tag: Localizing ceshellbase.rc in ceshell Tag: 48209
  - 9
    - PCSC Test Dear All, I got the STC USB Reader. I would like to do the PC/SC compliance test myself. I have also got the test cards. Does anyone know where I can get the test applications and DLL files to run in my MIPS R4000 processor target device? Thanks Tag: Localizing ceshellbase.rc in ceshell Tag: 48208
  - 10
    - Getting started with PB 4.2 I recently began developing my own OS image for a tatung web pad and have a few questions for you guru's. The tatung web pad comes with an image boot loader that boots the image running off the storage card. So right now I am simple building the platform, making the image, and copying it to the flash card to boot the image for testing. 1) Are there any good resource sites (besides MS) for information, examples, ect.. for building basic images. (sorta like quick references on implementing Wifi, active sync, displays ect..) 2) My first attempt at running a wizard built OS (Web pad enterprise I think) loaded fine with the flat vga driver except the resolution was way small (below 640x480) and I need it at 800X600, is there a way to set the resolution? 3) the basic display driver looked odd with lines through the screen and in grey scale. I could make out the desktop icons and some messagebox titles that where appearing (like unsupported network card ect..) my first guess is the wrong resolution, color depth. 4) Is there a way to tell what video board (and other hardware) the unit is running? And are there resources somewhere that list the supported video boards of the PB 4.2 shipped drivers already in the catelog? Thanks in advance for any help answering any of these questions. KC Tag: Localizing ceshellbase.rc in ceshell Tag: 48203
  - 11
    - Power off notification The CE.NET documentation defines the FSNOTIFY_POWER_OFF flag for MyFSD_Notify: Indicates that the device is entering a suspended state. No system calls can be made at this point, and the file system manager calls the application on a single thread. I would like to perform a flush when my FSD receives this notification. Can FSDMGR_WriteDisk and DeviceIoControl(IOCTL_DISK_DELETE_SECTORS) be called when I receive this power down notification, or do those calls classify as "system calls" in the documentation excerpt above? Thanks, Jeremy Tag: Localizing ceshellbase.rc in ceshell Tag: 48196
  - 12
    - USB function driver cannot get any interrupt My device: Intel Bulverde, CE.NET 4.2. After the USB cable attach is detected, the USB host (PC) does send reset siganl and enumeration data to the board as shown in USB protocol analyzer. I also checked D+/D- data signaling using the oscilloscope, it looks OK and is compliant with USB 1.1 spec. But in the CE driver, the function SerGetInterruptType always returns 0, so the communication can't start. I also dumped the UDC registers, the setting of UDCCR and UDCICR1 is OK but UDCISR1 is always 0. We use the USB function driver in Intel Bulverde BSP, the only change is USB ISR related processing (for USB cable attach/detach) and the difference between my development board and the standard Bulverde board is very minimal. Any help would be highly appreciated. Thanks, Alex Dumping UDC Regs: 28252 PID:bab5fb8a TID:9ab1c73e UDC_CR: 3 28253 PID:bab5fb8a TID:9ab1c73e UDC_ICR0: 15 28253 PID:bab5fb8a TID:9ab1c73e UDC_ICR1: 88000000 28254 PID:bab5fb8a TID:9ab1c73e UDC_ISR0: 0 28254 PID:bab5fb8a TID:9ab1c73e UDC_ISR1: 0 28255 PID:bab5fb8a TID:9ab1c73e UDC_FNR: 0 28255 PID:bab5fb8a TID:9ab1c73e UDC_OTGICR: 0 28256 PID:bab5fb8a TID:9ab1c73e UDC_OTGISR: 0 28256 PID:bab5fb8a TID:9ab1c73e UDC_UP2OCR: 130000 28257 PID:bab5fb8a TID:9ab1c73e UDC_UP3OCR: 0 28257 PID:bab5fb8a TID:9ab1c73e UDC_CSR0: 0 28257 PID:bab5fb8a TID:9ab1c73e UDC_CR_A: 200D103 28258 PID:bab5fb8a TID:9ab1c73e UDC_CSR_A: 0 28258 PID:bab5fb8a TID:9ab1c73e UDC_CR_B: 2014103 28259 PID:bab5fb8a TID:9ab1c73e UDC_CSR_B: 0 Tag: Localizing ceshellbase.rc in ceshell Tag: 48193
  - 13
    - GetKeyState() problem It seems I can't read the state of my Alt, Control, or Shift flags.... The following code was generated to return the status of these flags: //-------------------------------------------------------------------------- -------- int WINAPI WinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, LPTSTR lpCmdLine, int nCmdShow) { for(int i=0;i<400;i++) { SHORT sControl = GetKeyState(VK_CONTROL); RETAILMSG(1,(L"sControl: 0x%X\r\n",sControl)); SHORT sShift = GetKeyState(VK_SHIFT); RETAILMSG(1,(L"sShift: 0x%X\r\n",sShift)); SHORT sAlt = GetKeyState(VK_MENU); RETAILMSG(1,(L"sAlt: 0x%X\r\n",sAlt)); SHORT sCaps = GetKeyState(VK_CAPITAL); RETAILMSG(1,(L"sCaps: 0x%X\r\n",sCaps)); Sleep(800); } return 0; } // WinMain //-------------------------------------------------------------------------- -------- The debug messages only return 0x0 regardless of the state of the input system "flags". If you have any ideas, please let me know... Thanks, Jim Merkle Tag: Localizing ceshellbase.rc in ceshell Tag: 48181
  - 14
    - Support Additional NE 2000 Compatible NIC Greetings All, I am building an image for a Geode board with an onboard nic (the infamour Realtek 8139). This board also has a PCI slot into which I can add an additional NIC card . What I would like to do is allow the image to support the board both when it just has the lone onboard NIC and when an end user plugs in an NE2000 compatible NIC card. Thus far just adding the drivers to the image doesn't work - it fails to start the network services and fails to complete loading. If anyone has any suggestions how I can accomplish this I would greatly appreciate hearing them. Bill Morrison Tag: Localizing ceshellbase.rc in ceshell Tag: 48179
  - 15
    - ExtEscape fails to call my ContrastControl function. Hi All, It's my understanding that if I use the ExtEscape function with the CONTRASTCOMMAND escape code, that the call should eventually wind up in my GPE derrived display class. I know my ContrastControl function is being called during the initialization, but the ExtEscape call from my application always returns 0 (indicating failure) and my ContrastControl function is never called. Is there something else I need to do in my display driver to "enable" the interface through the ExtEscape function? Following is a the code I'm using for the call: HDC hdc = GetDC(NULL); struct ContrastCmdInputParm CCmd; CCmd.command = CONTRAST_CMD_SET; CCmd.parm = 0; int ExtRes = ExtEscape(hdc, CONTRASTCOMMAND, sizeof(CCmd), (const char *)&CCmd, 0, NULL); Thanks in advance, Chris Tag: Localizing ceshellbase.rc in ceshell Tag: 48176
  - 16
    - Problem in XScale exiting from sleep mode after a fault signal assert Hi all, I'm working on a DBPXA255 based platform and Windows CE 4.1. When I assert one of the BATT_FAULT or VDD_FAULT signals, the microprocessor enters in sleep mode correctly. But when I deassert that fault signal and use a wake up source (GPIO1 for instance) the power consumption goes a bit high and it seems that is trying to wake up from sleep, but I cannot see the Windows CE image working another time. It has to be a software problem, but my doubt is: if the software was working properly, would the execution continue in the same point that it was when the fault signal was asserted??? What could be this problem's source??? Thanks in advance, Lur Tag: Localizing ceshellbase.rc in ceshell Tag: 48174
  - 17
    - Is there a way to boost MediaPlayer's playback thread priority We are having a problem that when MediaPlayer is playing a Mp3 song, draging an icon on the desktop will cause the Mp3 playing back breaks. It looks to me that the shell consumes all the rest CPU power to repaint the desktop window and the MediaPlayer isn't given enough time to process. I assume that both the shell repaint thread and the MediaPlayer playback thread are running at default thread priority of 251 and with default thread quantum of 100ms. Is there anyway to boost the MediaPlayer playback thread priority? Or is there any other better idea to work this around? -- Rui Tang Centrality Communications Inc Tag: Localizing ceshellbase.rc in ceshell Tag: 48168
  - 18
    - Need Help: LIB : fatal error LNK1181: cannot open input file 'and' I receive this message when a try to build a windows ce .net 4.2 image for an arcom sbc-gx1 board: ---------------------------------------------------------------------------- -------- Windows CE Version (Release) (Built on Jun 7 2002 17:04:51) makefile.def: BUILDROOT is D:\WINCE420\public\ie\cesysgen addlib D:\WINCE420\PUBLIC\IGX1N001\WINCE420\SBC_GX1\cesysgen\sdk\lib\x86\retail\uui d.lib D:\WINCE420\public\ie\oak\lib\x86\retail\ieuuid.lib LIB : fatal error LNK1181: cannot open input file 'and' NMAKE : fatal error U1077: 'addlib' : return code '0x49d' Stop. --------------------------------------------------------------------------- Why the linker is serching for a file named 'and' ? Tag: Localizing ceshellbase.rc in ceshell Tag: 48163
  - 19
    - Need Help: fatal error LNK1181: cannot open input file 'and' Building a Windows CE .NET 4.2 image for arcom SBC-GX1 board i receive this error message: ---------------------------------------------------------------------------- -------- Windows CE Version (Release) (Built on Jun 7 2002 17:04:51) makefile.def: BUILDROOT is D:\WINCE420\public\ie\cesysgen addlib D:\WINCE420\PUBLIC\IGX1N001\WINCE420\SBC_GX1\cesysgen\sdk\lib\x86\retail\uui d.lib D:\WINCE420\public\ie\oak\lib\x86\retail\ieuuid.lib LIB : fatal error LNK1181: cannot open input file 'and' NMAKE : fatal error U1077: 'addlib' : return code '0x49d' Stop. ---------------------------------------------------------------------------- -------- Why the linker is searching for a file named 'and' ? Tag: Localizing ceshellbase.rc in ceshell Tag: 48162
  - 20
    - Problem with project on network drive I have an application that has been added to the FileView tab using "Add New Project". The code that I have added is not actually in the local drive but rather a network drive T:. Now when I build this it occasionally fails in a build step because it has concatenated the local path with the network path C:\WINCE420\PUBLIC\MyPlatform\project\T:\project. This generally happens after a full build of the complete platform. Should I be able to build a project from a network drive? Thanks, J Tag: Localizing ceshellbase.rc in ceshell Tag: 48160
  - 21
    - wallpaper version number displayed Hi Using Wince.net and what I get with any wallpaper is 'Windows CE .NET v4.20 (Build 1088 on Feb ???' being displayed 1/4 way up the screen. How can I get rid of this. Regards Tag: Localizing ceshellbase.rc in ceshell Tag: 48156
  - 22
    - XIP and demand page Hi, I am confused on XIP and demand page. When I set "IMGMULTIXIP=1", OS image will be built into many *.bin files. Then I use chain.lst to download the OS, I think "demand page" seems be on( I check the remaining memory) When I set "IMGMULTIXIP=", OS image will be built into one NK.bin. Then I download it, I think "demand page" seems be off (I check the remaining memory) Is the above description right ? As I know, XIP and demand page shoud be two different technologies. Can I turn on the XIP and turn off the demand page ? Can I build the OS to the NK.bin when I want to use the demand page ? Thanks. Yu. Tag: Localizing ceshellbase.rc in ceshell Tag: 48154
  - 23
    - How to implement IDE driver in WinCE 4.2 Hi I will write an IDE driver on WinCE 4.2 for our chip Can you give me any suggestions Regard -Weiji Tag: Localizing ceshellbase.rc in ceshell Tag: 48152
  - 24
    - OEMInterruptEnable() is not getting called Hi, currently i am doing wince.net 4.1 porting to 4.2 for xscale . my OS loads into memory and calls OEMinit And InitClock() but my OEMInterruptEnable() is not getting called with SYSINTR_SMSC. My code was working for 4.1. do i need to do any changes to make it work for 4.2. please Help thanks shyam Tag: Localizing ceshellbase.rc in ceshell Tag: 48149
  - 25
    - Internet Explorer registry setting Dear tech guru, I'm building a new Win CE 4.2 Platform. Could you tell me how to modify registry file for enabling and setting the proxy server in Internet Explorer ?? Thanks in advance!! Tag: Localizing ceshellbase.rc in ceshell Tag: 48148
- Next
  - 1
    - Nand Flash Driver for K9k2G16U0M Chip in WInCE 4.2 .NET Hi All, I am writting device driver for Nand Flash Chip (K9k2G16U0M Chip).I am using Microsoft Platform builder 4.2 .NET. In the Nand Flash K9K2G16U0M Chip,Page size is 1024 words and 32 words as spare area. I want to know the details of this spare area,I mean where the ECC code,Bad Block Information and other information is to be written. Where can i get it's specification ? Anyother suggestion is mostwelcome. Regards, Ajay Tag: Localizing ceshellbase.rc in ceshell Tag: 48147
  - 2
    - IEEE1394(Firewire) Source code Hi, Can someone with full CE source codes please tell me what is the following DEBUGCHK about. 4294771428 PID:23fa4b2a TID:e3e71dca 0x83e53c20: Unknown: DEBUGCHK failed in file d:\mckendric\private\winceos\drivers\1394\drivers\port\openhci\ohcipnp.c at line 1799 Thanks in advance. Paul W Tag: Localizing ceshellbase.rc in ceshell Tag: 48145
  - 3
    - How to compile for THUMB? Hi, My target platform is build under ARMV4I.( PB 4.2) I would like to build some drivers and applications for THUMB. How can I do it? ( I am building drivers with PB, and Applications with EVC) I looked at PB and EVC options and could not find the way to switch to THUMB. I found a lot of discussion in NG about ARMV4I and THumb, but unfortunately no answer for my problem. Thanks Ilia Tag: Localizing ceshellbase.rc in ceshell Tag: 48141
  - 4
    - Link smclib.lib 2 problems.. How do I get smclib.lib included into my platform How do I succesfully link smclib.lib? Since I could not get it in my platform (using ARMVI) I copied it over manually and then tried compiling the smart card device driver... unforutnately I get linking errors. I am using platform builder 4.2. I also tried setting in the project setting an absolute path to the smclib.lib in the common folder. Nothing seems to resolve my link errors. Tag: Localizing ceshellbase.rc in ceshell Tag: 48140
  - 5
    - Rectification on previous SAPI problem Excuse me, in the previous message I have been inaccurate. I re-write my message below. Hello, I have linked a program (simpledict.exe) that use speech api on WinCE.NET 4.2. When I debugging it, the initialize instructions: //*********************************************** HRESULT hr = S_OK; CComPtr<ISpRecognizer> cpRecoEngine; hr = cpRecoEngine.CoCreateInstance (CLSID_SpInprocRecognizer); //*********************************************** run right, but the next instructions: //*********************************************** hr = cpRecoEngine->CreateRecoContext(&m_cpRecoCtxt ); //*********************************************** fail. How can I use speech features supplied by WinCE.NET 4.2 properly in my application, and so how can I run properly it? Thank you ! Cancer02 Tag: Localizing ceshellbase.rc in ceshell Tag: 48136
  - 6
    - SAPI problem Hello, I have linked a program (simpledict.exe) that use speech api on WinCE.NET 4.2. When I debugging it, the initialize instructions: //*********************************************** HRESULT hr = S_OK; CComPtr<ISpRecognizer> cpRecoEngine; hr = cpRecoEngine.CoCreateInstance (CLSID_SpInprocRecognizer); if( SUCCEEDED( hr ) ) { hr = cpRecoEngine->CreateRecoContext( &m_cpRecoCtxt ); } //*********************************************** run right, but the next instructions: //*********************************************** if (SUCCEEDED(hr)) { hr = m_cpRecoCtxt->SetNotifyWindowMessage( hDlg, WM_RECOEVENT, 0, 0 ); } //*********************************************** fail. How can I use speech features supplied by WinCE.NET 4.2 properly in my application, and so how can I run properly it? Thank you ! Cancer02 Tag: Localizing ceshellbase.rc in ceshell Tag: 48135
  - 7
    - I am a question about SL811HS USB Host at Wince .NET 4.2 Now, I am developing a evaluation board using Cyperss SL811HST. I am a question about it. Following specification for our evaluation board: Xscale PXA255 Windows CE .NET 4.2 SL811HST R1.5 SL811HST Win CE Driver Rev. 0.3 I had test to mouse the result is no problem. However, the problem is printer. The printer name is HP inkject 920c. When I check the debugging message, it displayed idVender and idProduct to right. The WAIT_TIMEOUT error is occurd at IssueVendorTransfer() and IssueBulkTransfer()function in usbclient.c file. Please, check the problem. Tag: Localizing ceshellbase.rc in ceshell Tag: 48133
  - 8
    - Multi-core debug Hi folks FYI. Check out www.fs2.com - they have brought out a multi-core debug solution, where you can connect multiple DIFFERENT cores and debug them simultaneously .. jm Tag: Localizing ceshellbase.rc in ceshell Tag: 48132
  - 9
    - GlobalMemoryStatus Hi All, We are using Windows CE.NET 4.2. We are getting numbers from this API which does not correlate with the actual hardware memory we have. We are considering hardware issue remote possbility for now. The hardware in which we have 64MB RAM gives us following nos : dwTotalPhys = 35102720 dwAvailPhys = 10379264 Now the total physical value looks really strange. The questions I have : 1. How is the GlobalMemoryStatus internally implemented ? Does it rely on some function in OAL/HAL layer ? 2. If just windows implements this function, then how can I explain the above nos ? Any pointers will be really helpful. Regards, Rajiv Tag: Localizing ceshellbase.rc in ceshell Tag: 48130
  - 10
    - DHCP Request not working Hi I'm using CE4.2. When I try to download an image thru eboot, I go this problem:(but if I enter subnet mask, it works.) If I boot CE(using another method), DHCP can't get an IP from the server either. the network does work when I use a static ip. Can anyone give me some hint as what goes on? InitDHCP():: Calling ProcessDHCP() ProcessDHCP()::DHCP_INIT DHCP requesting an IP address... -OR- Press a key to enter an IP address in next 5 seconds DHCP Message Received ! !CheckUDP: Not UDP (proto = 0x00000001) DHCP Message Received ! !CheckUDP: Not UDP (proto = 0x00000001) DHCP Message Received ! works if I enter a mask: Enter new subnet mask or CR to use existing mask: 255.255.255.0 ReadSerialIP()::Using IP Address 192.168.1.120, netmask: 255.255.255.0 Sent BOOTME to 255.255.255.255 Tag: Localizing ceshellbase.rc in ceshell Tag: 48125
  - 11
    - System hangs on suspend/resume I am trying to configure Power Management on my Au1100 based board with CE.NET. If I Start|Suspend then try to resume with an interrupt, the system hangs. I'm not sure how to interpret the debug output. Here is a copy, can anybody point me in the right direction? 244312 PID:20b2292 TID:e1eeef92 Back from OEMPowerOff 244316 PID:20b2292 TID:e1eeef92 We have the 32kHz oscillator, start it if it is not already running 244174 PID:20b2292 TID:e1eeef92 Using RTCTICK tick source 244175 PID:20b2292 TID:e1eeef92 Calling device manager power proc. 244176 PID:20b2292 TID:e1eeef92 Calling GWES power proc. 244176 PID:a1f67af2 TID:e1eeef92 Returning to normally scheduled programming. 244177 PID:a1f67af2 TID:e1eeef92 Setting Event 420ac8ca, phd = 820ac8c8 244177 PID:a1f67af2 TID:e1eeef92 Setting Event 420acdc2, phd = 820acdc0 244178 PID:a1f67af2 TID:e1eeef92 Setting Event a2053f92, phd = 82053f90 244178 PID:a1f67af2 TID:e1eeef92 Returning from PowerOnSetEvents. 244180 PID:20b2292 TID:420a7862 0x820a8400: OEMIocontrol:: Code=0x10100a8 244180 PID:20b2292 TID:420a7862 0x820a8400: DeviceType: 0x101 244180 PID:20b2292 TID:420a7862 0x820a8400: Access: 0x0 244180 PID:20b2292 TID:420a7862 0x820a8400: Function: 0x2a 244180 PID:20b2292 TID:420a7862 0x820a8400: Method: 0x0 244180 PID:20b2292 TID:420a7862 0x820a8400: OEMIoControl: Unknown IoControlCode 0x10100a8. 244181 PID:20b2292 TID:c1ff9fba 0x81ff5000: SerialDllEntry 244181 PID:20b2292 TID:41e9cdfa 0x81f739a0: SerialDllEntry 244181 PID:20b2292 TID:41e9cdfa 0x81f739a0: +CHub(Root tier 0)::HandleDetach 244221 PID:20b2292 TID:c20365ea 0x81f608b8: SerialDllEntry 244223 PID:20b2292 TID:81ff5fda 0x81ff2000: SerialDllEntry 244225 PID:20b2292 TID:41e9cdfa 0x81f739a0: CHub(Root tier 0)::HandleDetach - status change thread closed in 3 ms 244227 PID:20b2292 TID:41e9cdfa 0x81f739a0: +CFunction(tier 1)::HandleDetach 244224 PID:20b2292 TID:c20365ea Ndisuio: 244229 PID:20b2292 TID:c20365ea Status: Open 0005F930 in power state 4, Status 40010004 ignored 244231 PID:20b2292 TID:c20365ea Ndisuio: 244231 PID:20b2292 TID:c20365ea Status: Open 0005F930 in power state 4, Status 40010005 ignored 244232 PID:20b2292 TID:c20365ea 0x81f608b8: ndisMResetCompleteStage2: Internal reset 244239 PID:20b2292 TID:41e9cdfa 0x81f739a0: !CQueuedPipe(Control)::ClosePipe 002c5420 doesn't exist! Thanks, -- Frank D. Lombardo Turning Point Technology, Inc. Frank_AT_TurningPointOnline_DOT_com Tag: Localizing ceshellbase.rc in ceshell Tag: 48121
  - 12
    - CEC File Crashes Platform Builder 4.2? Hey guys. I've been trying to write my own .cec file to adapt a new reference BSP for a PPC platform, and I'm running into problems. I've read all of the CEC documentation in the help file. I started from an existing .cec. I verified that I have a nice unique CECInfo field. I've verified that all of my drivers have ComponentType fields that match existing ones exactly (like "Serial"), or they're completely new and unique. I've verified that all of my Implementations and BuildMethods have unique GUIDs. I'm able to load this in the CEC editor, and import it into my catalog. I can view all of my components in the catalog. However, as soon as I try to create a simple platform based on this new BSP, Platform Builder throws an exception. I do the following steps: 1. Start the "New Platform" wizard from File->New Platform. 2. Hit "Next" to get past the Step 1 screen. 3. Select my "NewBSP" from the Available BSP's screen in Step 2. 4. I select the "Mobile Handheld" configuration from the "Available configurations" option. I also enter the name "NewPlatform" in the "Platform Name" field. I then hit next. 5. I remove everything from the "Application and Media" screen, just for safety. (I didn't do this originally.) I then hit next. 6. I de-select everything from the "Networking and Communications" screen, just for safety. (I didn't do this originally.) I then hit next. 7. I then hit finish. After doing this, I can see PB doing something, then I see the "Copying sample configuration files..." status at the bottom. Then, I get: cepb.exe - Application Error The instruction at "0x5119f6fd" referenced memory at "0x00000000". The memory could not be "read". In other words, someone de-references a null pointer. Needless to say, I'm seeing the same problem with many other configurations, too. I've even completely cleaned my catalog by running the "cleandb.bat" and re-importing my .cec file. Has anyone seen this before? Does anyone have any ideas what I could be doing wrong in my .cec file? Anything to look for? I've been all over this .cec file, and it should work. I've done other custom .cec files before, and I haven't run into this. Any help would be greatly appreciated guys. This is starting to drive me a little bit crazy. Well, ok, maybe a little bit MORE crazy. I've been using Platform Builder long enough that I'm already a Kb short of a meg, if you know what I mean. ;) Mark Murawski Vocollect, Inc. Tag: Localizing ceshellbase.rc in ceshell Tag: 48113
  - 13
    - expired trial I've been evaluating Ce 4.2 for use with an embedded project I am working on. As it was a long evaluation the 120 day trial on PowerBuilder finally expired. We are currently buying a license but since PB has already expired where do I install the new license? Everytime I try to launch PB it says 'trail expired' on a popup. When I close the popup PB shuts down. Do I have to unistall PB and reinstall? I can do it but I already have alot of items custom configured in it and setting them back up would be a real pain Anyone have any idea how to license Power Builder after the trial has expired? Tag: Localizing ceshellbase.rc in ceshell Tag: 48111
  - 14
    - How to setup project in private folder that replaces part of public folder I am going to be customizing the Microsoft Bluetooth GUI and would like to know how best to setup this custom project. I would like to do so without manipulating any files in the public directory if possible. Only some of the files in OAK/DRIVERS/NETUI will be modified and possibly some in OAK/DRIVERS/BLUETOOTH/ I am sure I could get the desired effect by editing the DIRS and SOURCES files but that would be editing files in the public directory. So, how can I set up the build so that it builds my modified code and not microsofts defaults with modifying the public directory? THANKS!!! Tag: Localizing ceshellbase.rc in ceshell Tag: 48110
  - 15
    - LP-E CF Card doesn't work!! Hi all, I am working on a DBPXA255 based platform but it hasn't the SA-1111 chip, so it has the CF socket conected like that is in the Sandgate platform. I have a LP-E Ethernet card and I have addapted the Eboot's code and now I can download the WinCE image through the LP-E using the NE2000's code that comes with the EBOOT. But now I am trying to use it to connect my platform with the Ethernet using the NE2000 driver that comes in the C:\WINCE410\PUBLIC\COMMON\OAK\DRIVERS\NETCARD\NE2000 directory but it doesn't work. I have addapted the PCMCIA driver to use it like in the SANDGATE (and I have supported the BCR register, too). When I use a memory CF card I can read and write in it correctly so I think that the PCMCIA driver is working correctly. I have checked it one and another time but I don't see anything wrong. Nevertheless, I have seen that there's a ne2000.c file in the C:\WINCE410\PLATFORM\XSC1BD\DRIVERS\PCMCIA directory. Is this file used somewhere??? I think no, but should I use this instead of the NE2000 driver that I am using?? My other question is if I need to change the NE2000 driver's registry entries. I have proved to adecuate the default InterruptNumber and IOBaseAddress to my target device but it continues the same way. If I download a debug image with the KITL activated (through the SMSC LAN91C96 device), I don't see any strange debug messages and everything seems to be all right. I have proved with the DHCP enabled and it doesn't found the default gateway IP. I have proved to disable the DHCP and to fix a static IP but I cannot ping that IP from my host computer. And if I try to ping to a IP address from my target device, I found the next message: "PING: transmit failed. error code 11010". Should I have to change something more or do I need a specific driver to make it work?? Any advice would be appreciate. Thanks in advance, Lur Tag: Localizing ceshellbase.rc in ceshell Tag: 48109
  - 16
    - MOUHID attaching problem Hi, I'm debugging the USB UHCI driver for SL811HS on WCE4.2. If USB mouse is attached at or after startup, attaching UHCI device passes. In both cases, there are no reactions on mouse moving/pressing. I guess I included all necessary reg settings: [HKEY_LOCAL_MACHINE\Drivers\USB\LoadClients\Default\Default\3\Hid_Class] "DLL"="USBHID.DLL" "Prefix"="HID" "Index"=dword:1 [HKEY_LOCAL_MACHINE\Drivers\USB\ClientDrivers\Hid_Class] "DLL"="USBHID.DLL" "Prefix"="HID" [HKEY_LOCAL_MACHINE\Drivers\HID\LoadClients\Default\Default\1_2\Mouse] "DLL"="MOUHID.DLL" Still, I can not see that mouhid is activated. Should there be print: "MOUHID DllEntry attach"? Thanks in advance for any help, Dusko Tag: Localizing ceshellbase.rc in ceshell Tag: 48106
  - 17
    - Locking the SmartPhone 2002/2003 A question from the customer of one of my affiliates (sorry, I never saw SmartPhone personally, so, the question can be really stupid. Sorry). Is there any way to add the "Workstation Locked" functionality - as in NT4/w2k - to SmartPhone 2002/2003? The phone must awaken as locked, and require the password entrance before any operations. How can such an app be developed? There is some "System Password" in SmartPhone. Is it secure enough? Or just a toy? -- Maxim Shatskih, Windows DDK MVP StorageCraft Corporation maxim@storagecraft.com http://www.storagecraft.com Tag: Localizing ceshellbase.rc in ceshell Tag: 48102
  - 18
    - What is the best way to maintain two nearly identical builds? Hello, I currently have a working Platform in Windows CE .NET 4.1. However I want to add a build identical to the one I have currently, the exception being DCOM w/ Remote Access instead of Minimal COM support. How can I add this without creating an entire new platform? Thanks, George Tag: Localizing ceshellbase.rc in ceshell Tag: 48100
  - 19
    - multiple serial ports, one driver [SER_CARD2] I'm trying to figure out how SER_CARD2 reports two COMx: devices. (I'm assuming it does actually do that. Reading past posts, it would seem that it should use ActiveDevice(Ex) to add additional devices, but I don't see anything unusual like that in the SER_CARD2 sources I'm trying to develop a driver for a multiple port serial PCMCIA card. The way I understand it, I'll get one insert event, and therefore one call into the XXX_Init function no matter how I structure the registry keys. XXX_Init will need to generate any ports in addition to the first port Is there something I'm missing Tag: Localizing ceshellbase.rc in ceshell Tag: 48099
  - 20
    - Using Interrupts on IXDP425 I meant to post this here instead of app.development so I'm reposting it here... I have been given the task to measure how real-time WinCE 4.2 actually is. The methodolgy is essentially the same as what is discussed in http://msdn.microsoft.com/library/default.asp?url=/nhp/Default.asp?contentid =28000437. The primary reason I have to do this is some people doubt that it'll stay realtime while communicating over Ethernet. To summarize, I want to hook a signal generator to an input which will give me an interrupt. Eventually I want to have an application signaled that this input event occurred so I surmise that I'll need an ISR and an IST. Does anyone have any documentation on what Intel acually did with the BSP as far as interrupts? The Intel software library leads me to believe that I need to use ixOsServIntBind() to setup a callback function for that interrupt. Is that callback the ISR? I did a search for HookInterrupt() to look for examples of where in the Intel code this was used and I came accross the following comment in cfw_ixp425.c: *IXDP4XX NOTE: HookInterrupt() is not needed because we only have a single IRQ input. ALL IRQ's are routed to OEMInterruptHandler(). So I'm confused about what I actaully need to do to accomplish this task. Do I have to ask for the correct interrupt from the OELInterruptHandler()? Any and all help is appreciated. Tag: Localizing ceshellbase.rc in ceshell Tag: 48096
  - 21
    - Messenger Sign in prolem, MSNP8, QFE KB826650 I am using Platform Builder 4.2 and have included Windows Messegner Applicatio When trying to sign in to MSN messenger I get the error "...sign in failed since the service is temporarily unavailable, pls try later Apparently this is due to the MSNP8 protocol requirement which is available in the QFE KB826660. However I could not locate the QFE KB826650 on the downloads site Can someone help I have added all the QFEs including 2003Q4 to my platform w/o any luck Thank Rahul Tag: Localizing ceshellbase.rc in ceshell Tag: 48094
  - 22
    - browser other than ie? Hi, I've got a problem with the Internet Explorer ( I think it's 6.0) in Windows CE.net 4.2. I created a webinterface which contains a page that has to be refreshed every second. Unfortunately IE shows a white background while loading the page and this flickering looks terrible. If I use Mozilla, this does not happen, actually one does hardly realize that the page is updated. Does anyone know whether it's possible to run Mozilla on WinCE? Or whether another Version of IE handles this in a better way? Thanks. Myriam Tag: Localizing ceshellbase.rc in ceshell Tag: 48092
  - 23
    - Signed applications, RSAENH.DLL and common.bib I have a platform in which I've implemented OEMCertifyModule, and all exes and dlls have to be signed with our private key before they will run. Unfortunately our main application needs RSAENH.DLL for some crypto stuff. If I sign this, it detects it has been modified and refuses to run (correctly). At the moment my CertifyModule lets this dll through by recognising its name - this is a security loophole. If I could put RSAENH.dll in the MODULES section instead of the FILES section of common.bib, all would be well (it would be implicitly trusted). Obviously I don't want to change common.bib - how can I change config.bib to override common.bib? Or is there a better solution? Thanks for any answers. Tag: Localizing ceshellbase.rc in ceshell Tag: 48091
  - 24
    - FAT defragmentation Hi all, I have some Questions about the object store (SRAM) on CE devices running OS: Windows CE 3.0, 4.1 or 4.2 Question n°1: What filesystem does this object store use? Is this a FAT file system or other type? Question n°2: Does the object store get defragmented after a lot of file transfers, (copy/delete/move/read/write etc) Question n°3: Will ReadFile/WriteFile/FindFirstFile API functions take longer after a while to read/write/find a file? Question n°4: Will the chance to get RAM corruption on Read/Writes and Power fails increase after a lot of time (defragmentation)? Question n°5 : If needed, can we get a Object store deframentation tool running on Windows CE ? Thanks in advance, Peter. Tag: Localizing ceshellbase.rc in ceshell Tag: 48089
  - 25
    - Basic requirements for DVD playback Hi, Q1. Does any one know what the basic requirements are for DVD playback? Here is my idea: 1. DVD drive x 1 2. Hardware decoder or Software decoder supports DVD-Video format x1 Q2. Does WinCE.NET 4.2's Media Player 9 support DVD-Video format? I thought WinCE.NET 4.2's Media Player 9 requires a codec to do DVD playback. Thanks for helps. Jason Tag: Localizing ceshellbase.rc in ceshell Tag: 48086

Hi there

I am trying to localize the ceshellbase.rc resource file in ceshell folder under Platform Builder 4.2 to Vietnamese language. Trying to change one of the strings under the string table to Vietnamese language but fail. FYI, I have changed my PC regional settings and locale to Vietnamese. But does not help. Also found some information regarding the language option in resource tab at Project > Settings under eVC++ 4.0. But this is only applied to resource files that belong to a project. Furthermore, there is no Vietnamese option for selection under the Project > Settings > Resource tab's Language option

Anyone have experience changing string in eVC++ 4.0's resource editor to other languages? Please help

Thanks in advanced for your help.

Best Regards
Candy

Top