[Q]: Keyboard key strokes' sound

Tutorials Win: Microsoft Windows Forum

- Previous
 - 1
 - Unclear Portion in Pcienum shared code in platform builder hai, while i analysing the code in pci.c file in %_WINCEROOT%\Public\Common\Oak\Drivers\Ceddk\Test\Pcienum the following portion is unclear to me ,i feel that it may be related with pci bus ,pls explain the code if (function == 0 && !(pciConfig.HeaderType & 0x80)) { break; } } if (length == 0) { break; } } if (length == 0 && device == 0) { break; } } Thanking u Tag: [Q]: Keyboard key strokes' sound Tag: 59799
 - 2
 - same 4 PB error in every cepc build hai, i just creating cepc platforms in wince 4.2,but in every debug build same 4 error is showing ,i feel that it is a mistake in settings,experts pls help me,i tried my best in correcting the error. Error - still inside an if statement after parsing complete makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec). makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec). Error PB2505: Error executing #(F:\WINCE420\PUBLIC\mobilecepc\RelDir\CEPC_X~2\)makeimg.exe. MOBILECEPC - 4 error(s), 0 warning(s) Thanking u Tag: [Q]: Keyboard key strokes' sound Tag: 59797
 - 3
 - How to stop the wzcsvc for a wince platform Just as the title , and I want to use my own gui and service to config the wireless adapter, but i don't want to exclude it from the image. I just want to stop it!Thanks -- Composed with Newz Crawler 1.7 http://www.newzcrawler.com/ Tag: [Q]: Keyboard key strokes' sound Tag: 59795
 - 4
 - PB 4.2 error in keypad [Del.] key maping in RDP session Dear experts, We have found a strange behavior of some Windows CE 4.2 module, which is responsible for numeric keypad support. Maybe I am wrong and this is a problem originated in RDP of CE 4.2 ? Two test scenarios are compared. 1. Platform Builder 4.1 - works properly 2. Platform Builder 4.2 - error in [Del] key handling Test scenario description : Build a simple enterprise web pad or a thin client platform. We have used x86 processor on a simple device with a PS/2 standard keyboard connected to it, a CEPC would work. Include English locale only in your platform Display Based Devices->International->Locale Services- >English(US) National Language Support Only. Build a platform and deploy it. When it is up and ready, connect to a terminal server using included RDP feature. You can use either Windows 2000 Server or Windows 2003 Server, the only requirement is that either server should have additional national language installed on it, with a language selection indicator on a task bar. We have tested Russian. Then run some simple application, which can handle keystrokes, for example a notepad. Select Russian language in a task bar. Then press NumLock so it is toggled and it's led is lit. Now press [/] key on a numeric keypad, and / appears well, then press the [Ins] key on a numeric keypad, and 0 appears too. Then press [Del] key on a numeric keypad, but . will not appear, instead a corresponding Russian symbol appears under Windows CE 4.2, but . appears properly under CE 4.1 ! Why it is so !? If, say under Windows CE 4.2 Microsoft has decided to map all numeric keypad keys to appropriate national language keys, then it should be NumLock ON and [/] US -> respective national symbol for / NumLock ON and [Ins] US- > respective national symbol for 0 NumLock ON and [Del] US -> respective national symbol for . OR (like in CE 4.1 when national language in RDP session does not matter) NumLock ON and [/] is always / NumLock ON and [Ins] is always 0 NumLock ON and [Del] is always . But not the mixture of the two ! Please note : we do not include any locale into the platform in either case. This is done intentionally to isolate the problem occurring in CE 4.2. Did anybody else encounter such problem ? Doesn't have to be Russian language, maybe any other national language in RDP session is not working properly with numeric keypad keys ? Can someone provide a clue whether this should be searched in RDP area or in CE numeric keypad driver area (if that is separate from a keyboard driver) ? Thanks Sergei Tag: [Q]: Keyboard key strokes' sound Tag: 59793
 - 5
 - Prblm: WinCE 4.2 OS launch (hanging at kernel Start) hi: System Configuration: SDRAM ï? 64 Mbytes Address range is (0xA0000000 â?? 0xA4000000) Strata Flash ï? 32 Mbytes Address range is (0x00000000 â?? 0xA4000000) Software: Boot.bib file: MEMORY ; Name Start Size Type ; ------- -------- -------- ---- EBOOT A00C0000 00080000 RAMIMAGE ; 512 KB for code RAM A00B8000 00008000 RAM STACK A0050000 00068000 RESERVED SECTBUFF A0077C00 00000400 RESERVED DRV_GLB A1D53000 00001000 RESERVED BLOCK_BUF A1FF0000 00080000 RESERVED ; Total reserved area, which equals offset of the NK region in RAM g_dwRamImageStart 00000000 80248000 FIXUPVAR CONFIG COMPRESSION=ON PROFILE=OFF KERNELFIXUPS=ON SRE=ON ROMSTART=A00C0000 ROMWIDTH=32 ROMSIZE=00080000 MODULES ; Name Path Memory Type ; -------------- ---------------------------------------------- ----------- nk.exe $(_TARGETPLATROOT)\target\$(_TGTCPU)\$(WINCEDEBUG)\eboot.exe EBOOT CONFIG.BIB ; Name|Virtual/Cached |Size| Region Type MEMORY IF IMGFLASH ! NK 80248000 01000000 RAMIMAGE ; SDRAM 16MB: RAM 81248000 00C00000 RAM ; SDRAM 12MB: EDBG 8211D000 00020000 RESERVED ; x20000 for EBOOT - 3 Client memory pools of 24K (128K) ;end address is 0x8213D000 ENDIF IF IMGFLASH IF BUILD_ROM_BIN NK 98380000 01F80000 RAMIMAGE ; FLASH 32MB - 0x80000: Locate above EBOT image and configuration block ENDIF IF BUILD_ROM_NB0 NK 98300000 01E00000 RAMIMAGE ; FLASH 32MB - Replace EBOOT Image ENDIF RAM 81248000 00C00000 RAM ; SDRAM 12MB: ENDIF AUD_DMA 81E48000 0000A000 RESERVED SLEEP_SAV 81E52000 00001000 RESERVED DRV_GLB 81E53000 00001000 RESERVED CACHE_FLG 81E54000 0003C000 RESERVED DISPLAY 81E90000 00130000 RESERVED ; 1MB aligned BLOCK_BUF 81FC0000 00080000 RESERVED UNUSED_BUF 82040000 000DD000 RESERVED whql_sig 00000001 00002000 EXTENSION ; WHQL signature extension (6KB). ZBANK 86000000 00100000 RESERVED CONFIG ;@CESYSGEN IF !NK_NKNOCOMP COMPRESSION=ON ;@CESYSGEN ENDIF !NK_NKNOCOMP ;@CESYSGEN IF NK_NKNOCOMP COMPRESSION=OFF ;@CESYSGEN ENDIF NK_NKNOCOMP IF IMGPROFILER PROFILE=ON ENDIF IF IMGPROFILER ! PROFILE=OFF ENDIF KERNELFIXUPS=ON ROMFLAGS=0 IF IMGTRUSTROMONLY IF IMGNOTALLKMODE ROMFLAGS=12 ENDIF IF IMGNOTALLKMODE ! ROMFLAGS=10 ENDIF ENDIF IF IMGTRUSTROMONLY ! IF IMGNOTALLKMODE ROMFLAGS=2 ENDIF IF IMGNOTALLKMODE ! ROMFLAGS=0 ENDIF ENDIF IF IMGFLASH ! AUTOSIZE=ON ENDIF IF IMGFLASH ! ROMSTART=80248000 ROMWIDTH=32 ENDIF IF LOCALE=0411 ;JAPAN FSRAMPERCENT=0x60606060 ENDIF IF IMGFLASH ROMSTART=98300000 ROMWIDTH=32 ENDIF ; ; Save some room for Diagnostics Manager (DM) flashed in high memory ; ROMSIZE=01000000 ;16MB ;This defines the nk.nb0 file size Serial Debug Message: *******Beginning System Initialization******* CPU ID = A0 PXA255 SDCLK[1] = MemClk/2 MemClk = 99.53 MHz Run Mode = 2 * MemClk Turbo Mode = Run Mode Mode: TURBO Beginning SDRAM Scrub... SDRAM Scrub Complete ****************************************************** ****************************************************** ****************************************************** ****************************************************** ****************************************************** OEMInitDebugSerial using UART1 Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built Oct 27 2004 19:50:40 Microsoft Windows CE Ethernet Bootloader 3.3 for the TS/TV90 PXA255 Platform (Built Nov 16 2004) Press [ENTER] to download now or [SPACE] to cancel. Initiating image download in 5 seconds. 4 seconds. 3 seconds. 2 seconds. 1 seconds. Starting auto download ... Checking for SMC 91C111 Ethernet controller... LAN91C111: Chip Id 9 Revision 1 SMC MAC Address: 0:4:52:0:33:106 SMC 91C111 Ethernet controller initialized. System ready! Preparing for download... INFO: Using device name: 'XSC1BD8554' +EbootSendBootmeAndWaitForTftp Sent BOOTME to 255.255.255.255 -EbootProcessARP returning *PROCESS_ARP_REQUEST* Rajesh: Entering EbootProcessEDBG Locked Down Link 1 Src IP 172.20.25.32 Port 0400 Dest IP 172.20.25.56 Port 0D0B EthDown::TFTPD_OPEN::boot.bin -EbootSendBootmeAndWaitForTftp Download BIN file information: ----------------------------------------------------- [0]: Base Address=0x80248000 Length=0x1AE530 ****** Downloading operating system image for SDRAM target ****** Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr rom_offset=0x0. Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Entering OEMIsFlashAddr Found pTOC signature. Entering OEMIsFlashAddr Entering OEMIsFlashAddr ROMHDR at Address 80248044h RomHdr.ulRAMStart=80400000h RomHdr.physfirst=80248000h. Done. Writing 0xA00B8118 to flash address 0xB83C0300 (length=0xA3C). Sector=0x201 (Length=0x6) Block=0x1 (Length=0x1). Handling non-block aligned data... FlashErase: Unlocking flash block(s) [0x1, 0x1] (please wait): Done. Erasing flash block(s) [0x1, 0x1] (please wait): .Done. Writing to flash (please wait): Done. RAJESH: OEMLaunch: Inside fWait. Rajesh: Entering EbootProcessEDBG Got EDBG_CMD_JUMPIMG Got EDBG_CMD_CONFIG, flags:0x00000000 RAJESH:*** Entering ACK Packet *** Entering OEMIsFlashAddr INSIDE else of(OEMIsFlashAddr(dwLaunchAddr)) 0x80249000... Download successful! Jumping to image at physical 0xA0249000... Problem Statement: Using a Tiny kernel image for launching. Ported Ethernet Bootloader from XSC1BD BSP. We verified that the code is reaching the JUMP to Kernel Start. Please refer the serial debug messages also. With the Tiny kernel we included one Stream Interface LED Driver. Configured to load at Init. (BUILTIN key in platform.reg) I am not getting this LED toggling. So we concluded that the OS is not executing. Please suggest on the configuration we are using for tiny kernel & LED Driver. Thanks & regards, Tag: [Q]: Keyboard key strokes' sound Tag: 59792
 - 6
 - [Q]: Dhyrstone & Whetstone Hi all, I am working on WinCE 4.2. What are Dhrystone and whetstone ? I came across one link in msdn which had some information in this regards, thats says: Dhrystone is a suite of arithmetic and string manipulating programs. Since the whole program is less then 8 kBytes, it fits into the processor cache. It can be used to measure two aspects both the processor's speed as well as the optimizing capabilities of the compiler. The resulting number is the number of executions of the program suite per second. Can anyone put more light on this along with 'whetstone'. regards sajid Tag: [Q]: Keyboard key strokes' sound Tag: 59790
 - 7
 - Re:Different image download method Related to the post a little below this entry. I have an nk.bin image created elsewhere (ie no source). Is it possible to use Platform Builder to launch that image? -- David Jones Senior Lecturer School of Electrical & Computer Engineering RMIT University +61 3 99255318 Tag: [Q]: Keyboard key strokes' sound Tag: 59786
 - 8
 - Build and Release SDKs? Is the SDK created with the Platform >Buld SDK command different when the build and release configurations are selected? I need to know if it should be run once for each configuration just as platform builds would be, or if the built SDK is the same for both. Tag: [Q]: Keyboard key strokes' sound Tag: 59782
 - 9
 - Transcriber on top of RDP I am trying to use transcriber on top of RDP, but I got "Transcriber operation over Remote Desktop is not supported. See your system documentation for more information." I do not have any similar problem with ICA. Any hints to enable it on RDP? I am using CE 4.2. Thanks, John. Tag: [Q]: Keyboard key strokes' sound Tag: 59776
 - 10
 - Different image download method Hello, I have a customized CE image that I created using Platform Builder. After I download and test the CE image to make sure it works, from the CE platform I have to copy NK.BIN from the 'Release' folder to the 'Hard Disk' folder in order to subsequently boot from that new image. Is there a way to tell Platform Builder to download the CE image to the 'Hard Disk' folder directly? Hardware currently: Parvus PC-104 board Also, what is the method of choice for copying a customized CE image to the device in a production setting? Thanks in advance. Edward Tag: [Q]: Keyboard key strokes' sound Tag: 59766
 - 11
 - Buffer size for IssueBulkTransfer Our platform is a USB host and we have been experiencing problems with IssueBulkTransfer() when requesting a bulk in or out transfer of 1K or more in the drivers we are developing for a device. The problem is the same in CE 3.0 and 4.2 -we have not tried 5.0 yet. The call is made with lpvBuffer and uBufferPhysicalAddress set to zero. IssueBulkTransfer returns with zero bytes transfered and no action occurs on the bus. We suspect it has to do with exceeding the space available in an internal buffer, but do not understand why it is happening. Our use of IssueBulkTransfer are similar to those in the BOT.cpp and CBIT.cpp. We recently tried a USB Mass Storage Device and tried to copy files. A file of 622 bytes transferred correctly. The file of 2.5K hung the system. thanks Steve Tag: [Q]: Keyboard key strokes' sound Tag: 59765
 - 12
 - Problem Cloning PUBLIC directory Hi Folks- I'm trying to clone the ATADISK driver from the PUBLIC tree of PlatformBuilder 5.0 and having some problems getting it to compile. Any help is greatly appreciated. I copied the files to a directory named ATADISK under PLATFORM\MyXscale\SRC\DRIVERS. I edited the sources file by changing the line: WINCETARGETFILE0=$(_COMMONOAKROOT)\lib\$(_CPUINDPATH)\$(TARGETDEFNAME).def to be WINCETARGETFILE0=$(_PROJECTOAKROOT)\lib\$(_CPUINDPATH)\$(TARGETDEFNAME).def When I try do compile using build -c, I get the following output (error message included). Any ideas what I'm doing wrong? I've also tried to compile the DLL directly by commenting out the DOSYSGEN line and get the output at the end. Thanks for any help. -Brian [output from building .lib file] C:\WINCE500\PLATFORM\MyXscale\SRC\DRIVERS\ATADISK>build -c Build for Windows CE (Release) (Built on Apr 22 2004 10:38:01) File names: Build.log Build.wrn Build.err Build.dat BUILD: [Thrd:Sequence:Type ] Message BUILD: [00:0000000000:PROGC ] Checking for \WINCE500\sdk\bin\i386\srccheck.exe. BUILD: [00:0000000001:PROGC ] SrcCheck exit code: 0 (dec). BUILD: [00:0000000002:PROGC ] Compile and Link for ARM. BUILD: [00:0000000003:PROGC ] Loading C:\WINCE500\PLATFORM\MyXscale\Build.dat. BUILD: [00:0000000004:PROGC ] Done. BUILD: [00:0000000005:PROGC ] Computing include file dependencies: BUILD: [00:0000000006:PROGC ] Checking for SDK include directory: C:\WINCE500\sdk\ce\inc. BUILD: [00:0000000007:PROGC ] Scan \WINCE500\PLATFORM\MyXscale\SRC\DRIVERS\ATADISK\ BUILD: [00:0000000010:PROGC ] Total of 0 pass zero files to compile in 1 directories. BUILD: [00:0000000011:PROGC ] Building generated files in \WINCE500\PLATFORM\MyXscale\SRC\DRIVERS\ATADISK\. BUILD: [01:0000000018:ERRORE] NMAKE : U1073: don't know how to make 'C:\sandbox\sw\x3v\wince500\x3vproj\WINCE500\MyXscale_ARMV4I\oak\lib\ARMV4I\debug\atadisk.def' BUILD: [01:0000000020:ERRORE] NMAKE.EXE -i -c BUILDMSG=Stop. NOLINK=1 PASS0ONLY=1 CLEANBUILD=1 failed - rc = 2 BUILD: [00:0000000021:PROGC ] Files Warnings Errors BUILD: [00:0000000022:PROGC ] Midl 0 0 0 BUILD: [00:0000000023:PROGC ] Resource 0 0 0 BUILD: [00:0000000024:PROGC ] Message 0 0 0 BUILD: [00:0000000025:PROGC ] Precomp Header 0 0 0 BUILD: [00:0000000026:PROGC ] C/Cpp/Cxx 0 0 0 BUILD: [00:0000000027:PROGC ] Assembler 0 0 0 BUILD: [00:0000000028:PROGC ] Static Libraries 0 0 0 BUILD: [00:0000000029:PROGC ] Dll's 0 0 0 BUILD: [00:0000000030:PROGC ] Exe's 0 0 0 BUILD: [00:0000000031:PROGC ] Resx 0 0 0 BUILD: [00:0000000032:PROGC ] Csharp Targets 0 0 0 BUILD: [00:0000000033:PROGC ] Other 0 0 2 BUILD: [00:0000000034:PROGC ] BUILD: [00:0000000035:PROGC ] Total 0 0 2 BUILD: [00:0000000036:PROGC ] BUILD: [00:0000000037:PROGC ] 0 Warnings, 2 Errors [output from building .dll file] C:\WINCE500\PLATFORM\MyXscale\SRC\DRIVERS\ATADISK>build -c Build for Windows CE (Release) (Built on Apr 22 2004 10:38:01) File names: Build.log Build.wrn Build.err Build.dat BUILD: [Thrd:Sequence:Type ] Message BUILD: [00:0000000000:PROGC ] Checking for \WINCE500\sdk\bin\i386\srccheck.exe. BUILD: [00:0000000001:PROGC ] SrcCheck exit code: 0 (dec). BUILD: [00:0000000002:PROGC ] Compile and Link for ARM. BUILD: [00:0000000003:PROGC ] Loading C:\WINCE500\PLATFORM\MyXscale\Build.dat. BUILD: [00:0000000004:PROGC ] Done. BUILD: [00:0000000005:PROGC ] Computing include file dependencies: BUILD: [00:0000000006:PROGC ] Checking for SDK include directory: C:\WINCE500\sdk\ce\inc. BUILD: [00:0000000007:PROGC ] Scan \WINCE500\PLATFORM\MyXscale\SRC\DRIVERS\ATADISK\ BUILD: [00:0000000010:PROGC ] Total of 0 pass zero files to compile in 1 directories. BUILD: [00:0000000011:PROGC ] Building generated files in \WINCE500\PLATFORM\MyXscale\SRC\DRIVERS\ATADISK\. BUILD: [00:0000000019:PROGC ] Scan \WINCE500\PLATFORM\MyXscale\SRC\DRIVERS\ATADISK\ BUILD: [00:0000000022:PROGC ] Compiling \WINCE500\PLATFORM\MyXscale\SRC\DRIVERS\ATADISK\ directory. BUILD: [01:0000000029:PROGC ] Compiling .\system.c BUILD: [01:0000000032:PROGC ] Compiling .\diskio.c BUILD: [01:0000000035:PROGC ] Linking C:\WINCE500\platform\MyXscale\lib\ARMV4I\debug\atadisk.lib BUILD: [00:0000000047:PROGC ] Linking \WINCE500\PLATFORM\MyXscale\SRC\DRIVERS\ATADISK\ directory. BUILD: [01:0000000054:ERRORE] NMAKE : U1073: don't know how to make 'C:\sandbox\sw\x3v\wince500\x3vproj\WINCE500\MyXscale_ARMV4I\cesysgen\sdk\lib\ARMV4I\debug\storeapi.lib' BUILD: [01:0000000056:ERRORE] NMAKE.EXE -i -c BUILDMSG=Stop. LINKONLY=1 NOPASS0=1 MAKEDLL=1 failed - rc = 2 BUILD: [00:0000000057:PROGC ] Files Warnings Errors BUILD: [00:0000000058:PROGC ] Midl 0 0 0 BUILD: [00:0000000059:PROGC ] Resource 0 0 0 BUILD: [00:0000000060:PROGC ] Message 0 0 0 BUILD: [00:0000000061:PROGC ] Precomp Header 0 0 0 BUILD: [00:0000000062:PROGC ] C/Cpp/Cxx 2 0 0 BUILD: [00:0000000063:PROGC ] Assembler 0 0 0 BUILD: [00:0000000064:PROGC ] Static Libraries 0 0 0 BUILD: [00:0000000065:PROGC ] Dll's 1 0 0 BUILD: [00:0000000066:PROGC ] Exe's 0 0 0 BUILD: [00:0000000067:PROGC ] Resx 0 0 0 BUILD: [00:0000000068:PROGC ] Csharp Targets 0 0 0 BUILD: [00:0000000069:PROGC ] Other 0 0 2 BUILD: [00:0000000070:PROGC ] BUILD: [00:0000000071:PROGC ] Total 3 0 2 BUILD: [00:0000000072:PROGC ] BUILD: [00:0000000073:PROGC ] 0 Warnings, 2 Errors Tag: [Q]: Keyboard key strokes' sound Tag: 59760
 - 13
 - Bug in IEEE1394/Firewire driver in CE5.0 The IEEE1394 driver has a severe bug which stops it from working on platforms with an address-space greater then 32 bit ( like the 36 bit AMD Au1550 Mips processor). When calling the MmMapIoSpace function only the lower 32 bits of the physical address are passed to the function and the wrong address is mapped. The driver ist binary only so I can't fix it myself. Tag: [Q]: Keyboard key strokes' sound Tag: 59757
 - 14
 - Adding a Font to Platform Builder catalog Is there a way to add a new true-type font to Windows CE.NET 4.2? I would like to add a font that is not in the Platform Builder catalog list of fonts (specifically a 7-segment display font). If this can be done in 4.2, is the same process used to add it to Windows CE 5.0? Thanks, Craig Whatley Tag: [Q]: Keyboard key strokes' sound Tag: 59749
 - 15
 - Display Controller on PXA255 I am using CE 4.2 and the XSC1BD LCD display driver. I am trying to run a 640x480 color display ( Optrex T-51513D104JU-FW-A-AC ). This display has DENA (data enable line) which is connected to the L_BIAS line on the PXA255 display controller. I have put a scope on the H_SYNC and V_SYNC lines and they appear to be in spec as required by the display, however, the DENA line is always HIGH. This does not appear to be what the display wants to see. I can not seem to get the PXA255 to toggle this line. Here is how I currently have the PXA255 display controller configured: v_pLcdRegs->LCCR1 = ( LCD_PPL(639) | LCD_HSW(63) | LCD_ELW(15) | LCD_BLW(138) ); v_pLcdRegs->LCCR2 = ( LCD_LPP(479) | LCD_VSW(35) | LCD_EFW(13) | LCD_BFW(33) ); v_pLcdRegs->LCCR3 = ( LCD_PCD(PCD) | LCD_ACB(0x6) | // was ACB=0 LCD_PCP | LCD_BPP(BPP) | LCD_HSP | LCD_VSP ); v_pLcdRegs->LCCR0 = ( LCD_LDM | LCD_SFM | LCD_IUM | LCD_EFM | LCD_BM | LCD_PDD(0x0) | LCD_PAS); Can anyone give me some advice on a next step to take? Is there another newsgroup that is focused on the PXA255 specifically? Thanks, Jeff Tag: [Q]: Keyboard key strokes' sound Tag: 59746
 - 16
 - How to Backup POOM contect in CE database hello, i faced a problem, how to backup POOM content like canlender, contacts, and so on. i thought, there are 2 approachs a copy db files , or open database to read record one by one. in the 1st approach, i don't know the .db files in platform builder is it the .db file which hold all POOM content in the 2nd approach, the reading one by one is very slow process, and i don't record id to looking for could you show me how to read all record. thank you in advance, sze yee Tag: [Q]: Keyboard key strokes' sound Tag: 59741
 - 17
 - Is wzcsvc a driver or a service? I've checked the registry and the CE 5.0 help, they all point out that wzcsvc is a driver, but what kind of driver it is? A protocol driver or anyother driver? Thanks! Tag: [Q]: Keyboard key strokes' sound Tag: 59740
 - 18
 - about GWES and GPE in display driver Hi: I am developing a display driver in WinCE5.0, but I don't understand the relation between GPE and GWES. Should I re-implement the 27 functions filled in the DRVENABLEDATA structure by DrvEnableDriver? Tag: [Q]: Keyboard key strokes' sound Tag: 59736
 - 19
 - RAS Server problem Hi, all I have some problem in using RAS Server in CE.net 4.2. I used the demo program called RASServer in PB. Here is what I did: 1, Add Ras Server/PPTP Server(Incoming) component; 2,I set registry as the help files told as below; [HKEY_LOCAL_MACHINE\Comm\Tcpip\Parms] "ArpUseEtherSNAP"=dword:0 "AutoCfg"=dword:1 "DefaultTOS"=dword:0 "DefaultTTLREG"=dword:128 "DNSDomain"="" "EnableDeadGWDetect"=dword:0 "EnableDHCP"=dword:0 "IGMPLevel"=dword:2 "IPEnableRouter"=dword:0 "NoIdleIfAdapter"=dword:0 "NoIdleIfConnected"=dword:0 "SackOpts"=dword:1 "TCP1323Opts"=dword:0 "TcpMaxConnectResponseRetransmissions"=dword:2 [HKEY_LOCAL_MACHINE\Comm\RTL81391\Parms\Tcpip] "AutoCfg"=dword:0 "AutoInterval"=dword:300 "AutoIP"="" "AutoMask"="255.255.0.0" "AutoSubnet"="" "DefaultGateway"="" "DhcpGlobalInitDelayInterval"=dword:0 [HKEY_LOCAL_MACHINE\Comm\ppp\Server\Parms] "UseAutoIPAddresses"=dword:1 "UseDhcpAddresses"=dword:0 "AutoIPSubnet"=dword:C0A80000 "AutoIPSubnetMask"=dword:FFFF0000 "StaticIPAddrStart"=dword:C0A8FE01 "StaticIpAddrCount"=dword:254 "AuthenticationMethods"=dword:0 "Flags"=dword:0 "Enable"=dword:0 "StartupDelaySeconds"=dword:20 3, Use direct connection mode through a null modem line to the two machines' COM1:, and the ports works fine. 4. Run the demo RasServer on CE device without problem. 5. When I tried to dial in from another PC, I got no response. After I inspected the registry on the CE device, I found a line was added successfully. So the RAS Server is running successfully. I guess some registry settings may be missing or be wrong. In the registry I found a problem: I found nowhere to set the serial port's baud rate. In CE, how to synchronize the baud rate on my both machine? Thanks! maverick Tag: [Q]: Keyboard key strokes' sound Tag: 59733
 - 20
 - Loading NK.BIN in the production mode Hello, I have a customized CE image that I created using Platform Builder. After I download and test the CE image to make sure it works, from the CE platform I have to copy NK.BIN from the 'Release' folder to the 'Hard Disk' folder in order to subsequently boot from that new image. Is there a way to tell Platform Builder to download the CE image to the 'Hard Disk' folder directly? Also, what is the method of choice for copying a customized CE image to the device in a production setting? Thanks in advance. Shane Tag: [Q]: Keyboard key strokes' sound Tag: 59727
 - 21
 - PC104 and PC104 Plus Question We are starting a new windows CE project on a SBC with a PC104 bus. I was told that we should use a SBC computer that uses PC104 Plus interface because that is PCI and that is the interface that Windows CE drivers expect to see to talk to various peripherals. We will be using the PC104/PC104-Plus bus to connect to an IO board that will have other interfaces on it like ethernet, more USB, maybe CAN, Parallel IO and WiFi. Is it true that we should look for a PC104-Plus board over a PC104 board? Thanks. Tag: [Q]: Keyboard key strokes' sound Tag: 59726
 - 22
 - PCMCIA question I added some debug statements to track what the PCMCIA driver is doing. From the output below you can see that we are writing large blocks of data to the PCMCIA card. Can anyone tell me what the client ISRs are and why we always get ten calls to them? For smaller sector writes we get 1 call but for the most part they are always 10. Does the code simply split up request into 10 interrupts? If so, why? Thanks, Nick. Writing 0x00000100 sector(s) starting at 0x0003a38c. PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR Writing 0x000000b0 sector(s) starting at 0x0003a48c. PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR Reading 0x00000020 sector(s) starting at 0x00023ecc. PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR PCMCIA:CallClientISR - returned from Client ISR Writing 0x00000020 sector(s) starting at 0x00023ecc. Tag: [Q]: Keyboard key strokes' sound Tag: 59725
 - 23
 - A HID device with Multiple interfaces Ok, so I have a keyboard here and when I look at what happens when it gets connected to the system, I see that there are two interfaces. The first interface has only 1 associated device with it, a keyboard hid device. The second interface, has 3. The first, a system control hid (sleep/wakeup keys), a consumer hid( ff, rw play keys) and a vendor defined hid (don't care). I've been told to write 1 HID driver that will handle all event 4 hid events (actually only 2, keyboard and consumer). After some digging this seems possible in windows 2000/XP/2003 by having a key with a only a vendor ID, product ID and rev versus a Vendor ID, Product ID, rev and Interface ID. Is the same thing possible under CE? Can I have 1 driver load that will handle all the HIDs across both interfaces? I know that the device ID keys are different under Windows CE. I know they are something like : [HKEY_LOCAL_MACHINE\Drivers\HID\LoadClients\VID_PID_REV\Interface_Collection\UsagePage_Usage\Keyboard]. So, any suggestions? Or should I just quit and open a flower shop? -- Using Opera's revolutionary e-mail client: http://www.opera.com/m2/ Tag: [Q]: Keyboard key strokes' sound Tag: 59724
 - 24
 - DirectShow Filter DLL registration problem on CE .NET Hi All, I built the filter DLLs of the Microsoft sample codes (DUMP, EZRGB24) using embedded Visual C++. However, I couldn't get them registered both on the device and on the Emulator. It seems that AMovieDllRegisterServer2() is not support in CE so I changed it back to AMovieDllRegisterServer(). Another two points that I haven't followed their instructions are: 1. Instead of setting the entry-point symbol to DllmainCRTStartup@12, only the default DllmainCRTStartup works 2. I didn't build the base class library by myself, do I have to build my own? Should it be DLL or static library? Does anyone have experience on building your own DirectShow filter on CE .NET? Thanks in advance, Steven Tag: [Q]: Keyboard key strokes' sound Tag: 59719
 - 25
 - "Storage Card" folder stays for 4 seconds after the SD or CF card is removed. On this one CE.NET 4.2 platform, each time I remove the SD card or CF storage card, the "Storage Card" folder will not disppear until after 4 seconds. On other 4.2 platforms the folder disppear immediately after the card is removed. I put debug messages in the SDMMC driver, the SDMMC loader detects the card is removed and unloads the SDMMC driver immediately after the card is removed. So what is causing the 4 seconds delay? Tag: [Q]: Keyboard key strokes' sound Tag: 59718
- Next
 - 1
 - Where is the Configuration Combo Box? Whenever I open my platform's workspace in plaform builder I message box appears with this message: "One or more unsupported configurations were found in the selected Platform Builder project file. The configurations will be grayed out in the configuration combo box." I need to see this combo box to find out what these unsupported configurations are. I did a search in online help for "configuration combo box" and did not come up with anything. Where is this "configuration combo box" ? Tag: [Q]: Keyboard key strokes' sound Tag: 59716
 - 2
 - USB Function Driver PDD layer All, I am working with a Windows CE 5.0 USB function driver's PDD layer. My processor is pxa255, and I have copied the 2 dirs in the existing function driver from the CSP directory under ARM\Intel\Pxa25x\Usb\Function to my platform's Drivers dir. I have modified the Lib\pxa25xufnlib.cpp to include hardware specifics of attachment, detachment, power on, power off etc, but left the code in the Pdd dir as is. The sources file in the two directories are setup to generate 2 lib files pxa25xufnlib.lib and pxa25xusbfn_lib.lib. What is the usage model that was envisioned for the usage of these libraries? I believe I need to generate a .dll that links both the mdd layer in ufnmddbase.lib and the pdd libs above, but I have not found code that "binds it all together". Regards, Inger M. K. Tag: [Q]: Keyboard key strokes' sound Tag: 59711
 - 3
 - problem loading driver Iam trying to load a stream interface driver "gendriver.dll" using an application on the Smartphone 2003 emulator. Following is the registry entry that i created. [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\gendriver] "Prefix"="GEN" "Dll"="gendriver.dll" "Order"=dword:0 When i use the ActivateDeviceEx(_T("Drivers\\BuiltIn\\Gendriverl"),NULL,0,NULL), It returns NULL and GetlastError() returns '2' ie, "The system cannot find the file specified" error. But the file is available on emulator in \\windows ,confirmed through remote file viewer. I get a valid handle for ActivateDeviceEx(_T"Drivers\\BuiltIn\\Serial"),NULL,0,NULL) Also tried unsuccessfully with the following change in the registry [HKEY_LOCAL_MACHINE\Drivers\gendriver] "Prefix"="GEN" "Dll"="gendriver.dll" "Order"=dword:0 Tag: [Q]: Keyboard key strokes' sound Tag: 59705
 - 4
 - PASSTHRU NDIS Intermediate Driver and IP address problem under WinCE 4.2 Hi everyone, I have used the passthru sample from the WinCE4.2 platform builder to create my own intermediate driver. I have call it IMdriver.dll and these are the registry entries I have added in the registry: HKEY_LOCAL_MACHINE\Comm\IMdriver1 NoDeviceCreate = 1 ImagePath = "IMdriver.dll" Group = "NDIS" I have not used any of the "Bind" or "ProtocolsToBindTo" since I wanted my intermediate driver to bind to any available miniport. I have install the driver to a PocketPC 2003 and have tried it using my miniport driver. Now, here is my problem. As soon as the device associates to the network, using WZCS, the oid OID_GEN_NETWORK_LAYER_ADDRESSES is set to the miniport with a valid IP address. If I try to ping my device from a remote station, it works fine. However, in the adapter's information where the IP should appear, I get an invalid IP address. In addition, when I searched in the registry I found out that the correct TCPIP configuration was under HKEY_LOCAL_MACHINE\Comm\IMdriver1\TCPIP instead of HKEY_LOCAL_MACHINE\Comm\MyMiniport\TCPIP, which had all zeros. I do not need to say that the IP is never renewed and the WZCS pops up the dialog that indicates I do not a connection with a valid IP and asks me to select a new access point. Does anybody know why the TCP/IP settings have been bound to the intermediate driver instead of the miniport? As I understand it look like my intermediate has not been "sandwitched" between the miniport and the protocols successfully. Any help will be greatly appreciated. Michalis Koundourakis Tag: [Q]: Keyboard key strokes' sound Tag: 59695
 - 5
 - CE 5.0 CEC File Hi, can anybody from MS tell me how we can use our painful created ce4.x catalogs? We use it only to copy and register ready compiled files to our platforms. And it was not easy to manage those hundreds of settings. I read in Help that: BIBInfo blocks are deprecated; BuildMethod blocks are now only used to specify supported CPUs and provide links to source files, Help documentation (.chm), and Platform Builder project (.pbpxml) files. So do we now have to manage all our compex files and settings in project.bib and project.reg? And do all the work again?? Tag: [Q]: Keyboard key strokes' sound Tag: 59694
 - 6
 - CE 5.0 compiling \PRIVATE\WINCEOS missing 'ndislink.h' error Can someone help me slove the error I got here? Thanks. BUILD: [00:0000000897:PROGC ] Compiling \WINCE500\PRIVATE\WINCEOS\COMM\BLUETOOTH \TDI\ directory. BUILD: [01:0000000906:PROGC ] Compiling .\tdi.cxx BUILD: [01:0000000909:ERRORE] e:\WINCE500\PRIVATE\WINCEOS\COMM\BLUETOOTH\TDI\tdi .cxx(55) : fatal error C1083: Cannot open include file: 'ndislink.h': No such fi le or directory BUILD: [01:0000000910:PROGC ] Linking E:\WINCE500\public\COMMON\oak\lib\ARMV4I\r etail\bttdi.lib BUILD: [01:0000000912:ERRORE] LINK : fatal error LNK1181: cannot open input file 'obj\ARMV4I\retail\tdi.obj' Tag: [Q]: Keyboard key strokes' sound Tag: 59689
 - 7
 - How to copy file in a readonly system? Hi, all Yesterday I found in a ce system that any action which tries to copy files is forbidden, a pop-up window says that system is a rom. I guess that due to choosing the feature of ROM-only file system in PB when building the NK.bin. So, there is another question: how can I get the file out,say copy, from the system when the system is a rom? Or, it's a mission imporssibble? THX maverick Tag: [Q]: Keyboard key strokes' sound Tag: 59684
 - 8
 - Failed to add the CoCreateGuid functionality for OLE32 feature This is a multi-part message in MIME format. ------=_NextPart_000_000A_01C4CA81.9824D880 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable When refreshing features I get this Warning: Warning PB2012: Failed to add the CoCreateGuid functionality for OLE32 = feature (SYSGEN_OLE_GUIDS) to the platform. ... 1 warnings found. Not all features or drivers could be added. The build = system will automatically include these when you build the platform. I do not know what to do about it. I also do not understand the message = at the bottom. I driver can be added or it cannot. How is it that it = cannot be added at refresh time but be automatically included at build = time? I have a suspicion this error has something to do with the addition of = regsvr32.pbp to the build. I had to add the ole32.lib to to it. To see = everything I had to do to this project in the build so far please see my = "Adding RegSvr32.pbp To The Platform Causes Errors" thread. ------=_NextPart_000_000A_01C4CA81.9824D880 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.2900.2523" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff background=3D"">When = refreshing=20 features I get this Warning: Warning PB2012:  Failed to add = the=20 CoCreateGuid functionality for OLE32 feature (SYSGEN_OLE_GUIDS) to the=20 platform. ... 1 warnings found. Not all features or drivers could = be=20 added. The build system will automatically include these when you build = the=20 platform. I do not know what to do about it. I also do not = understand the=20 message at the bottom. I driver can be added or it cannot. How is it = that it=20 cannot be added at refresh time but be automatically included at build=20 time? I have a suspicion this error has something to do with the = addition=20 of regsvr32.pbp to the build. I had to add the ole32.lib to to it. To = see=20 everything I had to do to this project in the build so far please see my = "Adding RegSvr32.pbp To The Platform = Causes=20 Errors" thread.</BODY></HTML> ------=_NextPart_000_000A_01C4CA81.9824D880-- Tag: [Q]: Keyboard key strokes' sound Tag: 59683
 - 9
 - where to store the hive directory? Hi, all I use Hive-based registry in my NK.bin. And system will generate a directory named "Documents and Settings" on the root after booting. I want to move it onto my Compact Flash. How can I manage to do it? I tried to modify the following registry,but failed. [HKEY_LOCAL_MACHINE\init\BootVars] ; "SYSTEMHIVE"="Documents and Settings\\system.hv" "SYSTEMHIVE"="\\HardDisk\\Documents and Settings\\system.hv" ; "PROFILEDIR"="Documents and Settings" "PROFILEDIR"="\\HardDisk\\Documents and Settings" "Start DevMgr"=dword:1 THX Tag: [Q]: Keyboard key strokes' sound Tag: 59682
 - 10
 - WBTSHELL can not work! Hello Every Guru, I am a new baby of using CE.NET PB 4.2. I am trying to use the WIZARD to build a Windows Thin Client platform. I thought that once I select from the Wizard to build a WBT will get a WBTSHELL for my x86 device. But I can not get the WBTSHELL, I get a Standard Shell instead. Who can help me out for this problem? I also notice that there is a file "rdp.reg", should I try to include this file in some where? Is there anyone can help me to build a WBT? Thanks in advance. Jack Wu Tag: [Q]: Keyboard key strokes' sound Tag: 59671
 - 11
 - binfs hi, i read in the mailing list that if we want to support binfs we have to build multiXIP image. i dont understand the necessity for this. i have nor flash and nand flash on my hardware. i will store eboot in nor flash and wince image in nand flash. my necessity is as follows i have to give support in eboot to download the store the wince image in nand flash(i am studying the support given in s3c2410 BSP) i will not mount binfs after wince boot. should i have to change to generate multiplexip to give the required functionality? can i store and read nk.bin(single xip)? Regards sharath Tag: [Q]: Keyboard key strokes' sound Tag: 59670
 - 12
 - cs8900 halt hi all my cs8900 driver will halt after work a while . I use serial kitl to debug it , and found there are 2 problems . 1 , interrupt not be detected . ndis calls MiniportDisableInterrupt to disable interrupt first ,then MiniportHandleInterrupt to do some processing ,finally MiniportEnableInterrupt . this is the whole processing with a receive packet interrupt accurs. But after some while MiniportDisableInterrupt will never be called .I don't know what happened . 2 , MiniportSendPackets triggers MiniportReset then the driver halted. What situation will cause NDIS call MiniportReset ? Thank you in advance. Tag: [Q]: Keyboard key strokes' sound Tag: 59669
 - 13
 - [Q]: Waveapi thread priority Hi all, How do I set the waveapi thread [SPS_Thread] priority ? Is there any registry setting for the same as present for audevman thread[CSmixer::MixerThreadMain] as below: [HKEY_LOCAL_MACHINE\Audio\SoftwareMixer] "Priority 256"=dword:dc regards Ryan Tag: [Q]: Keyboard key strokes' sound Tag: 59668
 - 14
 - Audio Driver IOCTL_MIX_MESSAGE has not been called Platform: SMDK2410 CE Version: 4.20 Target: to support mixer api The original driver provided by Samsung does not support IOCTL_MIX_MESSAGE in WAV_IOControl function. Our actions: 1. deal IOCTL_MIX_MESSAGE in WAV_IOControl 2. make sure waveapi.dll has been loaded 3. make sure audio driver wavedev has been loaded 4. An application calls mixerGetNumDevs, waveapi debug outs +WAM_Open -WAM_Open IOCTL_MIXER_GET_NUM_DEVS but IOCTL_MIX_MESSAGE has not been called, even WAV_IOControl has not been called Anyono can help me? Thanks in advance! Gowhawk Tag: [Q]: Keyboard key strokes' sound Tag: 59667
 - 15
 - WinCE QFE releases for the week of November 8 - November 12, 2004 The following updates for Windows CE have been recently released and are available for download. More information for each update is provided in the Readme document available after the individual update(s) has been installed. Windows CE 3.0 Update name: Windows CE 3.0 Platform Builder QFE 041108_KB883487 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=595AD93D-6D72-4CF8-AF53-64AF569EAC9B&displaylang=en Component: JScript, VBScript Description: Error handling by JScript and VBScript may cause a memory leak Windows CE .NET 4.0 Update name: Windows CE .NET 4.0 Platform Builder QFE 041105_KB888087 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=F9271F99-9583-4645-B6A3-139C9028DF97&displaylang=en Component: RDP Description: This update addresses possible SmartCard redirection issue. Windows CE .NET 4.2 Update name: Windows CE .NET 4.2 Platform Builder QFE 041103_KB888517 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=82A50211-13FA-4180-90AC-05643663FDD8&displaylang=en Component: URLMON Description: An exception may occur when parsing HTML file using Wininet API. Update name: Windows CE .NET 4.2 Platform Builder QFE 041105_KB885273 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=4380C9EC-5965-4B34-A9FA-3D1B4A3FB036&displaylang=en Component: 1394 Description: Windows CE .NET 4.2 may not always enforce data DWORD alignment requirement of 1394 SBP-2 protocol. This may result in some issues when reading/writing files. Windows CE 5.0 Update name: Windows CE 5.0 Platform Builder QFE 041101_KB885849 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=36C48D0C-6689-4272-A9FC-B7DCBE8BDA53&displaylang=en Component: pMail Description: Out of memory condition may occur when creating more then 150 emails. Update name: Windows CE 5.0 Platform Builder QFE 041104_KB838781 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=C0013B44-F13C-4F15-8126-118E7926BAAC&displaylang=en Component: USB driver Description: This is an update to the ARMV4I USB Function device driver. Update name: Windows CE 5.0 Platform Builder QFE 041110_KB887585 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=3E777B14-12E4-460E-8E49-E6D22503945F&displaylang=en Component: VoIP Description: VoIP UI settings do not get written to the registry and may get lost if the device is rebooted Download Link - directs you to the Microsoft Download Center page associated with each update. Each update is contained in a self-extracting compressed file. Component - displays the module(s) updated in each QFE Description - provides more information on the issue(s) fixed **DO NOT REPLY - THIS E-MAIL IS BEING SENT TO YOU FROM AN UNMONITORED ACCOUNT. Due to Microsoft's security requirements, the hyperlink(s) contained in this e-mail may not automatically open your browser. If you experience any difficulty, please copy the link and paste into your browser. ** Tag: [Q]: Keyboard key strokes' sound Tag: 59661
 - 16
 - 10ms IST latency I am new to Win CE and cant understand why I am having such a long latency on my IST. My hardware is generating a 1kHz interrupt on IRQ5. I am running CE 4.2. I measured over 10 ms (milliseconds!!!!!) of delay between the interrupt and my IST. Can anyone explain why there is such a delay? Is it how I built my OS image? Tag: [Q]: Keyboard key strokes' sound Tag: 59654
 - 17
 - Platform Builder 5.0 doesn't allow Windows XP SP2 to shut down I am running Windows XP SP2 on an Asus AMD 64 mother board. I installed the trial version of PB 5.0 the other day. Since that time when I go to shut down the computer gets to the screen that says "Windows is shutting down". The mouse cursor is active for a few seconds and then the computer freezes. The power light on the computer starts to blink at this time. I tried to think of all the things I have done to my computer over the last couple days and the only thing I could think of was installing PB. Luckily I have not made any other changes, so I did a System Restore to the restore point of installing PB. The problem is now fixed. I have not tried reinstalling PB to see if the problem comes back because I don't have the time to mess with it. I am posting here just too see if there is anyone else who is having this problem or knows a solution. Tag: [Q]: Keyboard key strokes' sound Tag: 59648
 - 18
 - Problem in EVC4 with Windows CE Standard Software Development Kit HI, I tried to build an application in EVC4 with the standard SDK for windows ce4.2. I want to build it for an ARM based device;but i couldnt find an option for that in my EVC4.The only option found is STANDARDSDK_420 Emulator. Can anybody suggest a solution for building my application for ARM processor(using the standard SDK). Tag: [Q]: Keyboard key strokes' sound Tag: 59643
 - 19
 - USB Enumeration fails We are using Win CE 4.2 .net and a OMAP 1610 SAMPLE (H2 with and expansion card) plattform. When we attatch the USB cable to the Win XP host PC, the enumeration of the USB Port fails. What I am trying to figure out, is if this is a base OS configuration problem or a BSP problem. From the log when CE boots these errors are reported. 7018 PID:e5db8f66 TID:e5db8bc6 ERROR: e:\wce_bsp\platform\omap\drivers\usbo\init.cpp line 399: 7019 PID:e5db8f66 TID:e5db8bc6 OTG: ERROR holding in reset. 9104 PID:e5db8f66 TID:e5db8bc6 ERROR: e:\wce_bsp\platform\omap\drivers\usbc\w2fc\usb_ser.cpp line 501: 9105 PID:e5db8f66 TID:e5db8bc6 OTG: ERROR holding in reset. The exact code where the error message is printed is this: init.cpp ....... VOID InitOTGController(POTG_REGISTERS pOTGRegs) { // Reset the OTG first pOTGRegs->ulSYSCON_1 |= MASK_SOFT_RESET; // Wait until reset is done DWORD dwCount = 0; while (!(pOTGRegs->ulSYSCON_1&MASK_RESET_DONE)) { if (dwCount++ > 100) { // Break out dead lock, something is wrong. ERRORMSG (TRUE, (TEXT("OTG: ERROR holding in reset.\n"))); return; } Sleep (1); } -> more code, but not executed ........ usb_ser.cpp ........ VOID InitOTGController() { POTG_REGISTERS pOTGRegs; DWORD dwCount = 0; pOTGRegs = (POTG_REGISTERS)MapIOSpace ( (void *)(PHYS_TO_UNCACHED_KERN(USB_OTG_BASE)), sizeof(OTG_REGISTERS), (PAGE_READWRITE | PAGE_NOCACHE)); if (!pOTGRegs) { ERRORMSG(1, (TEXT("OTG: failed to map OTG registers.\r\n"))); return; } // If OTG has been initialized, don't do it again. if ((pOTGRegs->ulSYSCON_2 & MASK_OTG_EN) || (pOTGRegs->ulSYSCON_2 & MASK_HMC_MODE)) { return; } // If OTG has been initialized, don't do it again. if (pOTGRegs->ulSYSCON_1 & (MASK_USB0_TRX_MODE |MASK_USB2_TRX_MODE|MASK_USB2_TRX_MODE)) { return; } // Reset the OTG first pOTGRegs->ulSYSCON_1 |= MASK_SOFT_RESET; // Wait until reset is done while (!(pOTGRegs->ulSYSCON_1&MASK_RESET_DONE)) { if (dwCount++ > 100) { // Break out dead lock, something is wrong. ERRORMSG (TRUE, (TEXT("OTG: ERROR holding in reset.\n"))); return; } Sleep (1); } -> more code, but not executed. Tag: [Q]: Keyboard key strokes' sound Tag: 59642
 - 20
 - PB2505 error experts help me hai, i have created a new platform named INTER_CEPC in 4.2 for internet appliance for cepc....everytime the error is the same,i again created another platform for cepc,same error,pls help me...no project is included.... Error - still inside an if statement after parsing complete makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec). makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec). Error PB2505: Error executing #(F:\WINCE420\PUBLIC\inter_cepc\RelDir\CEPC_X~2\)makeimg.exe. INTER_CEPC - 4 error(s), 0 warning(s) Thanking for ur help Tag: [Q]: Keyboard key strokes' sound Tag: 59638
 - 21
 - Why GWES turns off display automatically ???? Hi, I have a XIP image on .Net 4.2. When the splash screen is shown, the LCD is on. After splash screen, the LCD is off. After I print the debug messages, I found DISP::DrvEscape is called with SETPOWERMANAGEMENT to turn off the LCD. After I remove the battery driver, the phenomenon will not happen. Why ? BTW, non-XIP image will not have this situation. I put the following files in the xip kernel. nk.exe coredll.dll filesys.exe binfs.dll fsdmgr.dll mspart.dll FLASHDRV.DLL batterydrv.dll Thanks. Yu. Tag: [Q]: Keyboard key strokes' sound Tag: 59632
 - 22
 - How to get rid of "ok" button on dialog title bar? I delet system menu in dialog properties. "X" button disappeared but "ok" button not.How to get rid of "ok" button on dialog title bar? Tag: [Q]: Keyboard key strokes' sound Tag: 59631
 - 23
 - How to make sure an appl. not run XIP Hi all, Is it possible to make sure that an application is not run XIP from flash(IPSM directory), without first "manualy" copy it to RAM file system directory? I want to get best possible performance running an application that heavily creates,writes and reads files to flash(IPSM). I'm running CE 4.2 and IPSM. Best regards Anders Tag: [Q]: Keyboard key strokes' sound Tag: 59629
 - 24
 - Why icon can't appear in the tray? My application want to show a icon in the taskbar trap. I add codes as follow. These codes run when click on a button. m_tnid.cbSize=sizeof(NOTIFYICONDATA); m_tnid.hWnd=m_hWnd; m_tnid.uFlags=NIF_MESSAGE|NIF_ICON|NIF_TIP; m_tnid.uCallbackMessage=WM_TRAY_NOTIFY; //ÓÃ»§¶¨ÒåµÄ»Øµ÷ÏûÏ¢¡¡¡¡ CString szToolTip=L"ÍÐÅÌÍ¼±êÊµÀý"; _tcscpy(m_tnid.szTip, szToolTip); m_tnid.uID=IDI_ICON2; HICON hIcon=NULL; hIcon=AfxGetApp()->LoadIcon(IDI_ICON2); m_tnid.hIcon=hIcon; ::Shell_NotifyIcon(NIM_ADD,&m_tnid); After these codes run, a blank pane appears on the trap of taskbar,but the icon does't appear. Why the icon can't appear? Tag: [Q]: Keyboard key strokes' sound Tag: 59625
 - 25
 - WINCE 5.0 suspend/resume Dear all, I am working on WINCE 5.0 OS porting on my customized PXA270 platform. I got a trouble in suspend/resume function. For example, I run Microsoft WordPad, and I suspend the system and then resume it. And I can continue typing words in Microsoft Word, but the system will hang once I run other applications or close Microsoft WordPad. What problem is it? Thank you. Tag: [Q]: Keyboard key strokes' sound Tag: 59623

Hi all,

WinCE 4.2: How to disable keyboard key strokes' sounds ?

regards
Ryan

Re: Keyboard key strokes' sound by Paul

Paul
Wed Nov 17 09:40:26 CST 2004

The Control Panel provides a method for doing that. I'd guess that it
stores a key in the registry. If you set that key by default, you should
get no sounds by default on your platform.

Paul T.

"Ryan" <Ryan@discussions.microsoft.com> wrote in message
news:OenxE$IzEHA.3120@TK2MSFTNGP12.phx.gbl...
> Hi all,
>
> WinCE 4.2: How to disable keyboard key strokes' sounds ?
>
> regards
> Ryan
>
>

Top