Kernel can not boot without Kitl

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Platform Builder for Microsoft Windows CE 5.0 (cepb) I'm using this code for run in Windows CE 4.2,----------> syscmd( 'cepb C:\WINCE500\PBWorkspaces\ShingleSprings\ShingleSprings.pbxml /MAKE "ShingleSprings - CEPC: X86_Release" /REBUILD') There is no error there But it have error when I use the same code in Microsoft Windows CE5.0. What the command code i suppose to use so it can working in Windows CE5.0. How to use that format for that code? thank :) Tag: Kernel can not boot without Kitl Tag: 80864
  - 2
    - clone public btd I have a custom Bluetooth module that uses a uart channel on my CPU for its interface. I am attempting to use the "Bluetooth stack with integrated uart driver". The uart driver in the C:\WINCE500\PUBLIC\COMMON\OAK\DRIVERS\BLUETOOTH\TRANSPORTS\UART is not exactly what I want (I need to make a few tweaks). I know I should not modify the code in the public directory so I copied to my local platform dir and added a \bluetooth\src and \bluetooth\dll under my platform\src\driver tree. I copied the files from the public set the RELEASETYPE=PLATFORM etc etc. It uart lib builds OK. I next did the sysgen_capture thing to get sources.btd I renamed sources and added a makefile to the dll directory. sources looks like: TARGETNAME=btd TARGETTYPE=DYNLINK RELEASETYPE=PLATFORM SYNCHRONIZE_DRAIN=1 DLLENTRY=_DllMainCRTStartup DEFFILE=$(_PUBLICROOT)\common\oak\lib\$(_CPUINDPATH)\btsvc.def SOURCELIBS=\ $(_PUBLICROOT)\common\oak\lib\$(_CPUINDPATH)\bthci.lib \ $(_PUBLICROOT)\common\oak\lib\$(_CPUINDPATH)\l2cap.lib \ $(_PUBLICROOT)\common\oak\lib\$(_CPUINDPATH)\sdpbase.lib \ $(_PUBLICROOT)\common\oak\lib\$(_CPUINDPATH)\sdpparse.lib \ $(_PUBLICROOT)\common\oak\lib\$(_CPUINDPATH)\rfcomm.lib \ $(_PUBLICROOT)\common\oak\lib\$(_CPUINDPATH)\btsysd.lib \ $(_PUBLICROOT)\common\oak\lib\$(_CPUINDPATH)\bttdi.lib \ $(_PUBLICROOT)\common\oak\lib\$(_CPUINDPATH)\bthuart.lib TARGETLIBS=\ $(_PUBLICROOT)\common\oak\lib\$(_CPUINDPATH)\cclib.lib \ $(_SYSGENSDKROOT)\lib\$(_CPUINDPATH)\ceosutil.lib \ $(_SYSGENSDKROOT)\lib\$(_CPUINDPATH)\coredll.lib \ $(_SYSGENSDKROOT)\lib\$(_CPUINDPATH)\bthguid.lib \ $(_PUBLICROOT)\common\oak\lib\$(_CPUINDPATH)\btstubs.lib SOURCES= I then just tried to build it. (unmodified) I get the following errors: BUILD: [00:0000000007:PROGC ] Scan \WINCE500\PLATFORM\Gumstixi\Src\Drivers\Bluetooth\DLL\ BUILD: [00:0000000008:PROGC ] Saving C:\WINCE500\PLATFORM\Gumstixi\Build.dat. BUILD: [00:0000000010:PROGC ] Compiling \WINCE500\PLATFORM\Gumstixi\Src\Drivers\ Bluetooth\DLL\ directory. BUILD: [01:0000000017:PROGC ] Linking C:\WINCE500\platform\GUMSTIXI\lib\ARMV4I\debug\btd.lib BUILD: [01:0000000026:ERRORE] btsvc.def : error LNK2001: unresolved external symbol BTS_Close BUILD: [01:0000000027:ERRORE] btsvc.def : error LNK2001: unresolved external symbol BTS_Deinit BUILD: [01:0000000028:ERRORE] btsvc.def : error LNK2001: unresolved external symbol BTS_IOControl BUILD: [01:0000000029:ERRORE] btsvc.def : error LNK2001: unresolved external symbol BTS_Init BUILD: [01:0000000030:ERRORE] btsvc.def : error LNK2001: unresolved external symbol BTS_Open BUILD: [01:0000000031:ERRORE] btsvc.def : error LNK2001: unresolved external symbol BTS_PowerDown BUILD: [01:0000000032:ERRORE] btsvc.def : error LNK2001: unresolved external symbol BTS_PowerUp BUILD: [01:0000000033:ERRORE] btsvc.def : error LNK2001: unresolved external symbol BTS_Read BUILD: [01:0000000034:ERRORE] btsvc.def : error LNK2001: unresolved external symbol BTS_Seek BUILD: [01:0000000035:ERRORE] btsvc.def : error LNK2001: unresolved external symbol BTS_Write BUILD: [01:0000000036:ERRORE] C:\WINCE500\platform\GUMSTIXI\lib\ARMV4I\debug\btd.lib : fatal error LNK1120: 10 unresolved externals How do I resolve these errors so I can take the next steps? Tag: Kernel can not boot without Kitl Tag: 80861
  - 3
    - Interrupt Handler This is a multi-part message in MIME format. ------=_NextPart_000_0006_01C62D84.19AA9320 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi everyone, I am working with a pxa27x and I also have a fpga that = doing background tasks that could raise an interrupt on a gpio pin of = the pxa27x. I have implemented the functions for managing the interrupt = requests. But I am experiencing this problem : my driver's thread = doesn't get his event signaled when I return the associated sysintr = with the event in the function BspIntrActiveIrq. Here's what I do : - In BspIntrInit I do a mapping of the sysintr with = OALIntrStaticTranslate( sysintr, sysintr). - In BspIntrEnableIrq I set the corresponding register of my fpga for = enabling the interruption and return OAL_INTR_IRQ_UNDEFINED . - In BspIntrDisableIrq about the same of BspIntrDisableIrq - In BspIntrActiveIrq I read the the fpga status register to know which = sysintr to return, clearing the status bit of the gpio and return the = sysintr. If you need more details so you can help me out, let me know. Regards, Keaven ------=_NextPart_000_0006_01C62D84.19AA9320 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.2900.2802" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY> <DIV><FONT face=3DCourier size=3D1>Hi everyone, I am working with a = pxa27x and I=20 also have a fpga that doing background tasks that could raise an = interrupt on a=20 gpio pin of the pxa27x.  I have implemented the functions for = managing the=20 interrupt requests. But I am experiencing this problem : my = driver's thread=20 doesn't get his event signaled when I return the associated = sysintr  with=20 the event in the function BspIntrActiveIrq.</FONT></DIV> <DIV><FONT face=3DCourier size=3D1></FONT> </DIV> <DIV><FONT face=3DCourier size=3D1>Here's what I do :</FONT></DIV> <DIV><FONT face=3DCourier size=3D1>- In BspIntrInit I do a mapping of = the sysintr=20 with OALIntrStaticTranslate( sysintr, sysintr).</FONT></DIV> <DIV><FONT face=3DCourier size=3D1>- In BspIntrEnableIrq I set the = corresponding=20 register of my fpga for enabling the interruption and return=20 OAL_INTR_IRQ_UNDEFINED .</FONT></DIV> <DIV><FONT face=3DCourier size=3D1>- In BspIntrDisableIrq about the same = of=20 BspIntrDisableIrq</FONT></DIV> <DIV><FONT face=3DCourier size=3D1>- In BspIntrActiveIrq I read the the = fpga status=20 register to know which sysintr to return, clearing the status bit of the = gpio=20 and return the sysintr.</FONT></DIV> <DIV><FONT face=3DCourier size=3D1></FONT> </DIV> <DIV><FONT face=3DCourier size=3D1>If you need more details so you can = help me out,=20 let me know.</FONT></DIV> <DIV><FONT face=3DCourier size=3D1></FONT> </DIV> <DIV><FONT face=3DCourier size=3D1>Regards,</FONT></DIV> <DIV><FONT face=3DCourier size=3D1>Keaven</FONT></DIV></BODY></HTML> ------=_NextPart_000_0006_01C62D84.19AA9320-- Tag: Kernel can not boot without Kitl Tag: 80849
  - 4
    - Problem with USB Mass Storage Devices Hello, I have a WinCE 4.20 image with USB Mass Storage device support. Attaching and Deattaching USB Sticks works well, but when I attach an USB HD the device is not listed in Windows Explorer and not recognized. See below for the Debug Port output of attaching an 2,5" HD and an 3,5" HD to the USB Port. Both are not working. Thanks in advance. Gunnar I get the following output on the Debug Port when I attach a 2,5" HD: 0x8765c800: CHub(Root tier 0)::HubStatusChangeThread - port 2, change = 0x0001, status = 0x0101 0x8765c800: CHub(Root tier 0)::HubStatusChangeThread - device attached on port 2 0x8765c800: +CHub(Root tier 0)::AttachDevice - port = 2, fIsLowSpeed = 0 0x8765c800: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_OPENING_ENDPOINT0_PIPE, failures = 0 0x8765c800: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_USING_ADDRESS0, failures = 0 0x8765c800: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_RESET_AND_ENABLE_PORT, failures = 0 0x8765c800: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_SET_ADDRESS, failures = 0 0x8765c800: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_LEAVE_ADDRESS0, failures = 0 0x8765c800: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_GET_INITIAL_DEVICE_DESCRIPTOR, failures = 0 0x8765c800: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_GET_DEVICE_DESCRIPTOR, failures = 0 0x8765c800: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SETUP_CONFIGURATION_DESCRIPTOR_ARRAY, failures = 0 0x8765c800: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_GET_INITIAL_CONFIG_DESCRIPTOR, failures = 0 0x8765c800: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_GET_CONFIG_DESCRIPTOR, failures = 0 0x8765c800: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_DETERMINE_CONFIG_TO_CHOOSE, failures = 0 0x8765c800: WARNING!!!! Auto-selecting config #1 for new device. 0x8765c800: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_SET_CONFIG, failures = 0 0x8765c800: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_CREATE_NEW_FUNCTION, failures = 0 0x8765c800: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_INSERT_NEW_DEVICE_INTO_UPSTREAM_HUB_PORT_ARRAY, fai lures = 0 0x8765c800: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SIGNAL_NEW_DEVICE_ENTER_OPERATIONAL_STATE, failures = 0 0x8765c800: +USBD:OpenPipe, EP: 129, MaxPkt: 64, Type: Bulk 0x8765c800: -USBD:OpenPipe success, hPipe = 523E20 0x8765c800: +USBD:OpenPipe, EP: 2, MaxPkt: 64, Type: Bulk 0x8765c800: -USBD:OpenPipe success, hPipe = 523F30 0x8765c800: DEVICE!ActivateDeviceEx(Drivers\USB\ClientDrivers\Mass_Storage_Class\6) entered 0x8765c800: BOT_DataTransfer warning(6.7.2.3, RequestLength:512 TransferLength:63 Err:0 UsbErr:0x0, dwTimeout:5000) 0x8765e800: CQueuedPipe(Bulk)::CheckForDoneTransfers - failure on TD 0x4958c0, address = 1, endpoint = 1, errorCounter = 3, sta tus field = 0x20 0x8765c800: BOT_DataTransfer warning(6.7.x.3, RequestLength:449 TransferLength:0 Err:31 UsbErr:0x4, dwTimeout:4968) 0x8765c800: +USBD:ResetPipe 0x8765c800: ScsiGetSenseData - SenseKey:0x0 ASC:0x0 ASCQ:0x0 0x8765c800: ScsiModeSense ERROR:0 0x8765c800: Not loading a UpperDriver since partition manager exists0x8765c800: PNP interface class {A4E7EDDA-E575-4252-9D6B-41 95D48BB865} (DSK3:) ATTACH 0x8765c800: -CHub(Root tier 0)::AttachDevice - port = 2, fIsLowSpeed = 0, address = 1 0x801b8e20: Unsupported IOCTL:0x71c24 0x801b8e20: DSK_IOControl error: 50 0x801b8e20: Loading partition driver mspart.dll hModule=80175A68 0x801b8e20: Driver mspart.dll loaded 0x80165800: NOTIFICATION::XCeEventHasOccurred 0x80165800: NOTIFICATION::HandleSystemEvent 7 /ADD DSK3: 0x80165800: NOTIFICATION::HandleSystemEvent::Don't want \\.\Notifications\NamedEvents\DSTTimeChange 0x80165800: NOTIFICATION::HandleSystemEvent::Don't want \\.\Notifications\NamedEvents\DSTTzChange 0x801b8e20: Opened the store hStore=0009B5E0 0x801b8e20: NumSec=78140160 BytesPerSec=512 FreeSec=0 BiggestCreatable=0 0x801b8e20: Partition Part00 NumSectors=78140097 0x801b8e20: MSPART!PD_OpenPartition: dwStoreId=0009B5E0, PartName=Part00 0x80165800: NOTIFICATION::XCeEventHasOccurred 0x80165800: NOTIFICATION::HandleSystemEvent 7 /ADD DSK3: 0x80165800: NOTIFICATION::HandleSystemEvent::Don't want \\.\Notifications\NamedEvents\DSTTimeChange 0x80165800: NOTIFICATION::HandleSystemEvent::Don't want \\.\Notifications\NamedEvents\DSTTzChange Attaching another 3,5" HD causes the following output: 0x87667df0: CHub(Root tier 0)::HubStatusChangeThread - port 2, change = 0x0001, status = 0x0101 0x87667df0: CHub(Root tier 0)::HubStatusChangeThread - device attached on port 2 0x87667df0: +CHub(Root tier 0)::AttachDevice - port = 2, fIsLowSpeed = 0 0x87667df0: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_OPENING_ENDPOINT0_PIPE, failures = 0 0x87667df0: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_USING_ADDRESS0, failures = 0 0x87667df0: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_RESET_AND_ENABLE_PORT, failures = 0 0x87667df0: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_SET_ADDRESS, failures = 0 0x87667df0: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_LEAVE_ADDRESS0, failures = 0 0x87667df0: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_GET_INITIAL_DEVICE_DESCRIPTOR, failures = 0 0x87667df0: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_GET_DEVICE_DESCRIPTOR, failures = 0 0x87667df0: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SETUP_CONFIGURATION_DESCRIPTOR_ARRAY, failures = 0 0x87667df0: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_GET_INITIAL_CONFIG_DESCRIPTOR, failures = 0 0x87667df0: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_GET_CONFIG_DESCRIPTOR, failures = 0 0x87667df0: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_DETERMINE_CONFIG_TO_CHOOSE, failures = 0 0x87667df0: WARNING!!!! Auto-selecting config #1 for new device. 0x87667df0: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_SET_CONFIG, failures = 0 0x87667df0: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_CREATE_NEW_FUNCTION, failures = 0 0x87667df0: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_INSERT_NEW_DEVICE_INTO_UPSTREAM_HUB_PORT_ARRAY, fai lures = 0 0x87667df0: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SIGNAL_NEW_DEVICE_ENTER_OPERATIONAL_STATE, failures = 0 0x87667df0: +USBD:OpenPipe, EP: 129, MaxPkt: 64, Type: Bulk 0x87667df0: -USBD:OpenPipe success, hPipe = 522EE0 0x87667df0: +USBD:OpenPipe, EP: 2, MaxPkt: 64, Type: Bulk 0x87667df0: -USBD:OpenPipe success, hPipe = 522FF0 0x87667df0: DEVICE!ActivateDeviceEx(Drivers\USB\ClientDrivers\Mass_Storage_Class\6) entered 0x87667df0: BOT_DataTransfer warning(6.7.2.3, RequestLength:512 TransferLength:0 Err:1460 UsbErr:0x0, dwTimeout:5000) 0x87667df0: BOT_DataTransfer error(5.3.3, dwCswErr:1460, dwUsbErr:0x0, dwTimeout:4000) 0x87667df0: BOT_DataTransfer error(5.3.3, ResetErr:0x5b4 StallCount:0) 0x87667df0: Retry BOT_MassStorageReset 0x87667df0: BOT_DataTransfer warning(6.7.2.3, RequestLength:18 TransferLength:0 Err:1460 UsbErr:0x0, dwTimeout:5000) 0x87667df0: BOT_DataTransfer error(5.3.3, dwCswErr:1460, dwUsbErr:0x0, dwTimeout:4000) 0x87667df0: BOT_DataTransfer error(5.3.3, ResetErr:0x5b4 StallCount:0) 0x87667df0: Retry BOT_MassStorageReset 0x87667df0: ScsiGetSenseData error:1460 0x87667df0: ScsiModeSense ERROR:1460 0x87667df0: BOT_DataTransfer error(5.3.3, dwCswErr:1460, dwUsbErr:0x0, dwTimeout:4000) 0x87667df0: BOT_DataTransfer error(5.3.3, ResetErr:0x5b4 StallCount:0) 0x87667df0: Retry BOT_MassStorageReset 0x87667df0: BOT_DataTransfer error(5.3.1, 1460, 0x0, 0, 31, 4000) 0x87667df0: Retry BOT_MassStorageReset 0x87667df0: ScsiGetSenseData error:1460 0x87667df0: ScsiTestUnitReady ERROR:1460 0x87667df0: ScsiUnitAttention:1460 0x87667df0: BOT_DataTransfer error(5.3.3, dwCswErr:1460, dwUsbErr:0x0, dwTimeout:4000) 0x87667df0: BOT_DataTransfer error(5.3.3, ResetErr:0x5b4 StallCount:0) 0x87667df0: Retry BOT_MassStorageReset 0x87667df0: BOT_DataTransfer error(5.3.1, 1460, 0x0, 0, 31, 4000) 0x87667df0: Retry BOT_MassStorageReset 0x87667df0: ScsiGetSenseData error:1460 0x87667df0: ScsiStartStopUnit ERROR:1460 0x87667df0: BOT_DataTransfer warning(6.7.2.3, RequestLength:18 TransferLength:0 Err:1460 UsbErr:0x0, dwTimeout:5000) 0x87667df0: BOT_DataTransfer error(5.3.3, dwCswErr:1460, dwUsbErr:0x0, dwTimeout:4000) 0x87667df0: BOT_DataTransfer error(5.3.3, ResetErr:0x5b4 StallCount:0) 0x87667df0: Retry BOT_MassStorageReset Tag: Kernel can not boot without Kitl Tag: 80843
  - 5
    - Visual Studio.net Professional Hi Our hardware runs windows ce.net 4.2. I am using Visual Studio.net Professional to test a C# application and am using the deployment option over USB. Our hardware has three start up modes 1) WARMBOOT CE will load the existing RAM copies of file system and registry. If either of these fail, it will create new clean copies of both from the ce image. 2) COLDBOOT CE will create clean copies of both registry and file system from the ce image. Existing PSM files and registry will remain untouched. 3) CLEANBOOT CE will use clean RAM filing system and attempt to load registry from psm. The problem I have is that I can deploy to the hardware, but if after that I perform a cold or warm boot, the deployment fails. I find I must perm a cold boot for the deployment to function again. Has anyone experienced any such issues with Visual Studio.net Professional. Regards Tag: Kernel can not boot without Kitl Tag: 80842
  - 6
    - Rename workspace? I have a workspace named test3 that I have spent a lot of time in and would like to rename to a proper name including the directory. Is this possible without a ton of changes? Tag: Kernel can not boot without Kitl Tag: 80841
  - 7
    - Problem with break point Hi, I don't understand why the debugger don't stop on the different break point I put on my code. I'm on the WCE emulator on debug mode. I don't have several times the same page open. I have enable kernel debugger. So what is the problem???? Thanks for your help. Antoine Tag: Kernel can not boot without Kitl Tag: 80839
  - 8
    - Pkfuncs.h Hi! .. I'm aware that this subject has been discussed often ... But the platform builder eval is no longer availeble at microsoft.com .. so i was wondering if someone please could send me the pkfuncs.h file.. any help would be highly appreciated Sander Tag: Kernel can not boot without Kitl Tag: 80835
  - 9
    - Registry error for Windows Media Player Hi all, I have a CEPC with following compoentns: 1) Windows Media Player 2) Waveform Audio When I try to open a wave file from \Release folder, it gives and error. One dialog box pos-up with following message. "A registry entry is corrupt. (0x800403F2)" What else is required? Thanks in advance for your help. Regards, -milan Tag: Kernel can not boot without Kitl Tag: 80827
  - 10
    - "The system cannot find the path specified" in PlatformBuilder Win Hi, I'm trying to create the 'emulator' example out of the 'Welcome to Windows CE 5.0 > Tutorials > Tutorial: Building a Run-Time Image for the Emulator' tutorial. Everything goes well until i hit 'Build and Sysgen'. Platform builder doesn't even start and gives the following message : ==== --------------------Configuration: Emulator: x86_Debug-------------------- Starting Build: blddemo ============== The system cannot find the path specified CEPC0 - 1 error(s), 0 warning(s) ==== Additional info : Win2000 on 'drive D:', WinCE5 installed on an empty 'drive G:' Any suggestions on what can be wrong ? Thanks in advance, Joost. Tag: Kernel can not boot without Kitl Tag: 80824
  - 11
    - Problem with the remote tools on the Windows CE .NET Default Platform Hello everyone, I work on a platform that I have create, but I can't use the remote tools on it. They couldn't connect to the default device. What's the problem? Thanks in advance. Antoine Tag: Kernel can not boot without Kitl Tag: 80810
  - 12
    - Make a fsd restricted to a directory Hello everyone, I would like to create a fsd which acts only on a given file. How do I have there to be caught? Thank you in advance of your assistance. Antoine Tag: Kernel can not boot without Kitl Tag: 80809
  - 13
    - Error in creating image with RAS component added I am using PB5.0, and I had created a simple image containing serial ports, and other minimal stuff required for my use. Later on, I needed to have RAS and PPP included in my image so that I can have my device connect to a GPRS network via a GPRS modem. Now, when I added the required components for RAS and PPP, and I try to build the image, I get an error saying "failed or do not know how to make ppp2lcp.lib". On investigating the problem, I found that I had this lib in the \Lib\x86\Debug but it was missing from the Retail folder. I tried using a copy of the debug version, but ran into other errors. I then tried build the private source code provided. While building this the compiler failed to find files md5.h, rc4.h, and so on, and hence I could get the required libs made. I do not understand why these files are missing on my PC. Has anyone faced sch problems? How do I resolve this issue? Please Help!!! Thanks Tag: Kernel can not boot without Kitl Tag: 80808
  - 14
    - cf card reading in eboot as far as i remember there's a BSP came with pb5.0, with a ability of reading fat formatted CF card. or my memory was wrong? Tag: Kernel can not boot without Kitl Tag: 80802
  - 15
    - off load nk.bin to msystem DOC hello, currently I am making my nk.bin a ram based image, and I load it from mdoc to ram in eboot and run everything in RAM. I am thinking about to make my nk.bin smaller by moving driver/application files to msystem DOC fat partition. and the system load them from disk as needed. in this case... 1 compared with NOR flash I lose XIP, ram usage is going down from pure ram image anyway 2 files stored in fat partition is freely copy-able!! 3 I have to give up the bib files and gather needed files on my own. 4 app start up time is slower is there anyone who has experience on this? or is a ce pc similar in the case(harddisk vs msystem DOC chip) ? and how about the CE license? do I have to protect the system (ms) files from being copyied out of the device? Tag: Kernel can not boot without Kitl Tag: 80801
  - 16
    - How to "Use CodeClip to get the Tux_Custom_Test | TuxCode source" Dear all, I am leaning the "How to develop and test device drivers in windows CE 5.0"(http://www.windowsfordevices.com/articles/AT5839010990.html). One step in the procedures is "Use CodeClip to get the Tux_Custom_Test | TuxCode source". I am stuck here. The first problem is that the codeclip.exe cannot be downloaded although it is free. The second is where is the "Tux_Custom_Test | TuxCode source"? Please help! Thank you in advance! Sincerely, HWB Tag: Kernel can not boot without Kitl Tag: 80799
  - 17
    - How to check if my microphone works? hi, I m using Platform builder with WINCE 4.2 .net frame work. i m having a VIPER board supplied by Arcom. for my application i want enable my microphone. how can i check if my microphone is enabled. is there any sample application which can do the audio capture.. i have written a sample application on VC++ for capturing audio thru microphone. this works fine on win 2000 and XP...but when i put it on my board. nothing happens... how can i test my microphone input. thank u, Tag: Kernel can not boot without Kitl Tag: 80798
  - 18
    - Could you help me ? thanks all ! Ladies and Gentlemen: I want play flash in wince 5.0,so taht where component must be added? I am very glad if you would give me a hand. Yours Sincerely Liu Songhua Tag: Kernel can not boot without Kitl Tag: 80797
  - 19
    - Could you help me ? thanks all ! Ladies and Gentlemen: I want play flash in wince 5.0,so taht where component must be added? I am very glad if you would give me a hand. Yours Sincerely Liu Songhua Tag: Kernel can not boot without Kitl Tag: 80796
  - 20
    - about peghelp Hi, all I am transfering from ce.net 4.0 to 4.2, but met great problem when using peghelp. Here is what I called in my prog: CreateProcess(L"PegHelp.exe", L"\harddisk\myapp\myhelp.htm", NULL, NULL, false, 0, NULL, NULL, NULL, NULL); On ce.net 4.0, it runs without any problem, however, on 4.2 it always show the system's default help page, no matter how I change the file path. But in system's command line window, after I run "peghelp \harddisk\myapp\myhelp.htm", I can get the correct help window. What's wrong? Maverick Tag: Kernel can not boot without Kitl Tag: 80795
  - 21
    - How to debug bootloader using ARM eXDI driver for Windows CE PB? From the help of Windows CE Platform Builder 4.2 I knew that bootloader can be debugged by eXDI hardware driver and then I downloaded the ARM eXDI driver for Windows CE PB from www.arm.com. But the help of Windows CE Platform Builder 4.2 don't detail how to debug bootloader using eXDI driver. Who can tell me what I should do to debug bootloader of WinCE? The target board is S3C2410. Thanks. Tag: Kernel can not boot without Kitl Tag: 80793
  - 22
    - Missing Start Menu in WM5.0 Hi all, After the OS(WM5.0) boot up, "Start" button on the state bar(on the top of desktop)disappear, and the state bar,where "Start" button and battery state display, is transparent. Anybody can tell me why. And the overlay support is not enabled in my display driver. Dose it need overlay support? Thanks, Knight Lin Tag: Kernel can not boot without Kitl Tag: 80792
  - 23
    - Suppress Wireless Network Available Popup Dialogue? By default this dialogue appears when a device is powered up with a mini PCI wireless card attached. You can check the box then close the form to prevent the dialogue from displaying. How do I suppress the display of this dialogue by default in Platform Builder? WinCE 5.0 Thanks Tag: Kernel can not boot without Kitl Tag: 80789
  - 24
    - Root Certificates in CE 4.1 Were any root certificates made available in CE 4.1 ? I see them in CE 5.0, and they appear to get included in CE 5.0 by the inclusion of the the file sysroot.p7b and a registry key. I don't see anything like that in CE 4.1, and I can't seem to enumerate any items from the Root or CA system stores, although the help says that SCHANNEL has a bunch included. Tag: Kernel can not boot without Kitl Tag: 80782
  - 25
    - IsAPIReady(SH_SHELL) and shell components I am launching two applications via the Init registry key. The first is a simple test application and the second is my "shell" application "Launch70"="a2test.exe" "Depend70"=hex:0a,00,14,00,1e,00 "Launch80"="a2man.exe" "Depend80"=hex:46,00 All was good in the universe. Then I decided to add a PropertySheet to my test app. I now get an exception because some serivice is not available. Since I do not know how to determine what it is trying to use, I added the IsAPIReady(SH_SHELL) at the beginning of my test application. It NEVER becomes ready! It would seem that this is also a very obscure, or at least poorly documented, part of CE. If I run the explorer shell and then lauch my application it runs fine. Are the common controls dependent on Explorer.exe? Somewhat related is the fact that if I do not include the AYGSHELL API component the control panel applets do not show any of their windows controls! What sets the IsAPIReady(SH_SHELL)? And just as importantly how can I determine what magic component I am lacking when I get an Invalid System Service exception? Tag: Kernel can not boot without Kitl Tag: 80771
- Next
  - 1
    - WinCE5.0 - Hive Registry Hai everyone, Subject: WinCE5.0-Hive Registry First i built a platform with normal default registry it works fine. then i tried to configure the hive based registry. To configure a hive registry i did the following 4 steps, build with 0 errors. but when i try to connect to target machine, image downloaded to machine, after the i did not get the desktop(no response).I am not sure about system.hv and user.hv files creation, so i did not placed any such files in the specified registry directory, but i created the directory"Storage Card\config". do i have to place sytsem.hv, user.hv file there, if so how to do that, if not what is the issue? we are using X86, DiskOnChip2000. KINDLY help me out. Regards Sunny steps 1)Add hive resgistry from catalog to OS 2)EnvironmentVariables FILESYS_FSREGHIVE=1 BSP_MSYSTEMS_DISKONCHIP=1 3)common.reg ; @CESYSGEN IF FILESYS_FSREGHIVE ; HIVE BOOT SECTION [HKEY_LOCAL_MACHINE\init\BootVars] "SystemHive"="Storage Card\\config\\system.hv" "ProfileDir"="Storage Card\\config" ; "Flags"=dword:0x00000001 | 0x00000002 "Start DevMgr"=dword:1 "DefaultUser"="TBATM" ; END HIVE BOOT SECTION ; @CESYSGEN ENDIF FILESYS_FSREGHIVE 4)DiskOnChip.reg @CESYSGEN IF CE_MODULES_DEVICE ; HIVE BOOT SECTION IF BSP_MSYSTEMS_DISKONCHIP [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\TrueFFS] "Index"=dword:1 "Dll"="TrueFFS.dll" "Prefix"="DSK" "Order"=dword:1 "Ioctl"=dword:4 "WindowBase"=dword:D4000 "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" "Flags"=dword:1000 [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC] "Name"="DiskOnChip M-Systems" "Folder"="Storage Card" "DefaultFileSystem"="FATFS" MountAsBootable=dword:1 ENDIF BSP_MSYSTEMS_DISKONCHIP ; END HIVE BOOT SECTION ; @CESYSGEN ENDIF Tag: Kernel can not boot without Kitl Tag: 80763
  - 2
    - How to use HP-Ipaq-H5550 as developper platform ??? Hi, I have an Ipaq-H5550 and want to replace the system. The current system is: OS version: CE 4.2 Product ID: Pocket PC My question is if I can use and how - platform builder 5.0 and replace the system. I tried to figure it where the nk.bin are. Thanks, David Tag: Kernel can not boot without Kitl Tag: 80761
  - 3
    - Bluetooth Virtual com port There is something I don't understand about how the Bluetooth virtual com port works. I have a Bluetooth module that interfaces with my CPU via a standard uart RX an TX. I am using the BT stack w/integerated UART driver (SYSGEN_BTH_UART_ONLY) I have the hardware interface working and I use COM4 as my assigned CPU to BT module interface. I can see the HCI commands/responses come out/in on COM4. Next I would like now to establish a virtual COM port connection to my desktop. All the PB BT sample tests show specifing server or client, BT address and com index as command line parameters. When I use "4" as the com index it fails. I assume because the com port is already open (from the btd initialization on powerup). What am I missing? Tag: Kernel can not boot without Kitl Tag: 80759
  - 4
    - My serial ports don't work sometime! I have bought several PCM-3350 boards from Advantech. I find that it's serial port can't work sometime,but i can't repeat this problem. After this happened, i solved this problem by setting default BIOS value. I do not know why it is. Please help me! thanks! Tag: Kernel can not boot without Kitl Tag: 80758
  - 5
    - No "Unidentified USB Device" Pop-up We are using CE 5.0 with a VIA BSP on proprietary X86 hardware with multiple USB ports integrated. Although the OS platform and ports work as expected in most circumstances, they do not work as expected in all circumstances. In particular, when I connect a USB device that has no platform driver support, I would expect a "Unidentified USB Device" pop-up but none is displayed. Does CE 5.0 still implement this pop-up and if so, in what code? Thanks Tag: Kernel can not boot without Kitl Tag: 80756
  - 6
    - Afxmessagebox() not working i am working on cepc platform using enterprise webpad as design template. I have written an mfc application using evc 4.0 .it was working fine on the cepc.But afterwards i added some some catalog items related to storage devices ,Irda and voip.Now my application is working fine but my menu bar is showing numbers along with the menu items and my message boxs have disappeared .when i run in debug mode the application gives me degub check failure where ever statements relating to messageboxs are written.i again made a clean build ,but the problem still persists.I am not able to find out why the messageboxs are giving me debug check failure. Tag: Kernel can not boot without Kitl Tag: 80753
  - 7
    - How to check if my microphone works?? hi, I m using Platform builder with WINCE 4.2 .net frame work. i m having a VIPER board supplied by Arcom. for my application i want enable my microphone. how can i check if my microphone is enabled. is there any sample application which can do the audio capture.. i have written a sample application on VC++ for capturing audio thru microphone. this works fine on win 2000 and XP...but when i put it on my board. nothing happens... how can i test my microphone input. thank u, Tag: Kernel can not boot without Kitl Tag: 80752
  - 8
    - to .exe, .dll, or .lib? Dear all, I am quite confused about which one( exe, .dll, or .lib) to compiled to which each of the modules in PB. How is this decided and how the different 3 typed are linked to final OS image? If I want to add some driver module, which one should I choose? Thank you! Best Wishes, HWB Tag: Kernel can not boot without Kitl Tag: 80745
  - 9
    - FTP Server for Windows CE 5.0 Hi all, Is it possible to know if exist an FTP Server for Windows CE 5.0 ? Thanks for your answer Stefano Tag: Kernel can not boot without Kitl Tag: 80744
  - 10
    - Porting a driver from WinCE 4.2 to 5.0 (CodePalette) Hi everyone, I successfully developped a driver on WinCE 4.2 (I used CodePalette to generate the template). Now i'm willing to have it work on WinCE 5.0. I figured I could just compile it under Platform Builder 5 and see what appends, but ... nothing appends. My DllEntry is not even called. Is there major changes I should apply ? Have anyone already made a WinCE 5.0 driver using CodePalette ? I can't even have the template working. Thanks anyone who could help me. Edouard Dessioux Tag: Kernel can not boot without Kitl Tag: 80742
  - 11
    - TUI for CS call 1. Can the Telephony User Interface framework be used for CS call and not VoIp call. 2. Is there any default Dialer application on WinCE-5.0 Tag: Kernel can not boot without Kitl Tag: 80741
  - 12
    - Forcing Application to RAM without Paging I'm working on a device that has NAND, so no XIP. Unfortunately, at this point, the FMD for the NAND is extremely slow, with a maximum throughput of around 2.5MB/s, and optimizing it is not an option (for non-technical reasons at this point). Because it is so slow - application startup and paging operations are very slow (relative to similar devices). Because of this, I'm looking for some ways to make critical applications XIP out of RAM. At the lowest level conceptually - at boot time I want critical applications and DLLs copied into RAM so they don't have to be demand paged from the slow FLASH. Has anyone tried this - any helpful hints on how to accomplish - or other thoughts? Thanks, -Chris Tag: Kernel can not boot without Kitl Tag: 80735
  - 13
    - LAN91C111 on XSC1BD Hi, I'm porting Windows CE 4.2 XSC1BD BSP to a board based on Lubbock. This board has all features of Lubbock (It has an FPGA that maps all Lubbock Peripherals). The main difference between this board and Lubbock is the Ethernet Controller. The board I'm working has a SMSC LAN 91C111 Ethernet Controller. I'm trying to port the Eboot to this board. I already have the LAN 91C111 ETHDBG driver ported to Windows CE 4.2. And it is working in another board. The Ethernet Controller is mapped on nCS3 (0x0C00_0000), like Lubbock. And I gave a offset of 0x300 the access it (The registers offset for SMC 91C111). Without this offset the driver didn't detect the Ethernet Controller. To put this detecting the Ethernet Contoller I change the MSC1 register from 0x3FF1A441 to 0x3FFCA441, changing from SRAM to VLIO. But when I try to apply it the driver in the board I am working now it appears to start ok, but it does not communicate well. The driver detects the Ethernet Controllet ok on SMCInit() routine, but It appears to fail on SCMSendFrame() or SMCGetFrame() routines. For example: If I put DHCP Enabled on the bootloader, the board gets the IP from server. Then it starts to send BOOTME messages, but Platform Builder does not detect it. So, if I put DHCP Disabled and configure IP Manually, when the board starts do send BOOTME messages, Plaform Builder detect it. But does not download the image. I know that this board is working with all features ok on a Linux Kernel 2.6.11 based on Lubbock Configuration, just changing the driver for Ethernet Controller. Thanks, Marcelo Fornazin Tag: Kernel can not boot without Kitl Tag: 80729
  - 14
    - PB 5.0 BSP Export Wizard error In the Export Wizard I get to see following missing when pushing the 'Finish' button of the wizard: "Unable to initialize the .msi generator because a required component might be missing or damaged. Please reinstall Platform Builder" Anyone an idea which components PB is talking about? Thanks, Wesley Tag: Kernel can not boot without Kitl Tag: 80719
  - 15
    - a strange issue about smdk2410 Hi, I have a Sumsung 2410 evaluation board, and I use smdk2410 BSP. When I use touch screen to suspend os , after resume, the system will die. If I use mouse or key to suspend os, everything is OK. Have somebody meet this issue? Can somebody give me some advice? Thank you. Andy Tag: Kernel can not boot without Kitl Tag: 80716
  - 16
    - How to add resource information (FileVersion, Productversion, etc.) to nk.bin Hello, is it possible to add a resource script file (.rc file) to the platform builder project in order to add FileVersion, ProductVersion etc. information to the nk.bin built? I have a PB (WinCE 4.20) project including a user feature dll project. When I add a resource script file the information entered in this file are attached to the dll built by the user feature project and not to the nk.bin file. How can I get these information into the nk.bin? Thanks in advance. Gunnar Tag: Kernel can not boot without Kitl Tag: 80710
  - 17
    - RDP sound playback (WinCE5.0) Hi, I'm developing a thin client in CE 5.0. When I start a .WAV sound file playback in an RDP session (Windows XP host, Media Player 9) and bring it to the client (AudioRedirectionMode=0), using a 10 Mbit/s connection the song will play, but sometimes it will stop for a few seconds and then continue to play. Using a 100Mbit/s connection, I will hear one or two beats of music after some time or nothing at all. Does anybody have an idea, how to overcome this behaviour and play the sound continuously especially using the 100 Mbit/s connection. Anne Tag: Kernel can not boot without Kitl Tag: 80708
  - 18
    - insertion of a 32-bit cardbus card get a detection of a 16-bit card Windows CE 5.0 with a TI1520 PC card controller. I have two 32-bit cardbus cards being workable on PC. However, when I inserted any of them into one of the TI sockets, the "Present-State" register associated with the socket showed a value of dwPStateReg = 0x30000910. According to TI's manual, this value indicates that the socket supports 3/5 voltages and detected a 16-bit card in the socket. After that, the MDD showed the following messages. pcc_serv.DLL : CreatePCCardEnabler 16 Bit PCMCIA Card !!! and CPCPcmciaCard::GetConfigureRegisterBase: Can't get PCMCIA register address. return FAILS Does anyone experience the same? Tag: Kernel can not boot without Kitl Tag: 80707
  - 19
    - USBSerialFn : dwMaxTransferSize only set to dwMaxPacketSize because of WCEUSBSH bug ? Hi, In the \wince500\public\common\oak\drivers\usbfn\serial\usbfndrv.cpp file, in the USBSerialFn::CableAttached function we see the source code mentioning a "WCEUSBSH Bug". See the code snippet below. Code Snippet : >> >> void USBSerialFn::CableAttached() { .. DWORD dwBulkSize = (m_CurrentSpeed == BS_HIGH_SPEED? g_HighSpeedEndpoints[BULK_IN_DESCRIPTOR_INDEX].Descriptor.wMaxPacketSize: g_FullSpeedEndpoints[BULK_IN_DESCRIPTOR_INDEX].Descriptor.wMaxPacketSize); .. OpenBulkOut(m_hDevice, m_pUfnFuncs,uEdptAddr,TRUE,dwBulkSize, dwBulkSize, 4); // WCEUSBSH Bug. Only can usb MaxPacketSize .. << << The result is that the PDD has to complete transfers more frequently. I wondered if this was a bug of WCEUSBSH that had gotten fixed already, so I tried changing the call to OpenBulkOut to specify a larger dwMaxTransferSize parameter (4K buffer) : OpenBulkOut(m_hDevice, m_pUfnFuncs,uEdptAddr,TRUE,dwBulkSize,/*dwBulkSize*/4096, 4); The result is that it more than doubles our bulk out transfer speed. (simply because the MDD doesn't have to complete so many transfers any more I guess) I am wondering now if others have seen the same thing ? Can you try ? And better yet, can Microsoft confirm whether or not this indeed is a bug in WCEUSBSH that got fixed ? I do not seem to have any issues with my ActiveSync 4.1.0 (Build 4841). Let me know. Thanks -- Ronald Tag: Kernel can not boot without Kitl Tag: 80701
  - 20
    - where is the source file of btd.dll and btdrt.dll Hi everyone: Does somebody know where is the source file of btd.dll or btdrt.dll ? I use platform builder for WinCE 5.0. Best regards Sam Tag: Kernel can not boot without Kitl Tag: 80697
  - 21
    - USB Serial not working on WinCE 5.0 XSCALE Lubbock-based version of WinCE 5.0 is finally running, but I'm not able to get my USB Functional port working. In version 4.2 I had USB Functional without serial client working. It turned up as a "Windows CE device" on my PC. The USB structure has changed considerably from 4.2 to 5.0, but fortunately I had the Lubbock 5.0 version as a good starting point. In 4.2 version I didn't have to do any changes to the USB driver part, only change the GPIO-pin for USB attach/remove in the interrupt handler. In 5.0 version I have added the catalog item USB Functional from my BSP, but now it requires me to add the item: Device Driver -> USB Function -> USB Function Clients -> Serial (colud choose Mass Storage or RNDIS Client). When I plug my device into the PC it stops and I get unknown device on my PC. Need some advice, anything I have forgotten or should be awear of? ; @CESYSGEN IF CE_MODULES_USBFN IF BSP_PXA25XUSBFN [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\xsc1bdusbfn] "Dll"="xsc1bdusbfn.dll" "Prefix"="UFN" "Priority256"=dword:73 ; must be lower-priority than RndisFn's transfer thread "EndpointCount"=dword:10 "SupportedSpeeds"=dword:2 "IoBase"=dword:a6800000 ; UDC_BASE_U_VIRTUAL "IoLen"=dword:1000 ; Needs at least 0xE04. Round up to 1 page. "Sysintr"=dword:1e "BusIoctl"=dword:2a0048 "IClass"=multi_sz:"{E2BDC372-598F-4619-BC50-54B3F7848D35}=%b","{6F40791D-300E-44E4-BC38-E0E63CA8375C}=%b" ENDIF BSP_PXA25XUSBFN ; @CESYSGEN ENDIF CE_MODULES_USBFN /trond Tag: Kernel can not boot without Kitl Tag: 80694
  - 22
    - Serial PCMCIA Card . doesn't work?? HELP pb 5.0 ARM4 cpu, ti-pccard 1520 ( 2 sockets, one for pcmcia slot and the other for CF). The CF card is workable, after I added some registry values. [HKEY_LOCAL_MACHINE\Drivers\PCCARD\PCMCIA\TEMPLATE\PCMCIA] "Dll"="pcmcia.dll" "NoConfig"=dword:1 "IClass"=multi_sz:"{6BEAB08A-8914-42fd-B33F-61968B9AAB32}=PCMCIA Card Services" But the Ican't startup the Serial pcmcia card . Would you help to solve the problem ? .. Should I create any registry key? I found some registry keys below !! Does it affect my pcmcia card? .... ... [HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Detect\10] "Dll"="SERIAL.DLL" "Entry"="DetectModem" [HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Detect\41] "Dll"="pcx500.DLL" "Entry"="DetectPCX500" [HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Detect\50] "Dll"="ATADISK.DLL" "Entry"="DetectATADisk" [HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Detect\60] "Dll"="NE2000.DLL" "Entry"="DetectNE2000" [HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Serial] "DeviceArrayIndex"=dword:1 "Prefix"="COM" "Dll"="Serial.Dll" "ResetDelay"=dword:300 "IClass"="{CC5195AC-BA49-48a0-BE17-DF6D1B0173DD}" [HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Serial\Unimodem] "Tsp"="Unimodem.dll" "DeviceType"=dword:0 [HKEY_LOCAL_MACHINE\Drivers\PCMCIA\NE2000] "Dll"="ndis.dll" "Prefix"="NDS" "Miniport"="NE2000" [HKEY_LOCAL_MACHINE\Drivers\PCMCIA\CISCO] "Dll"="ndis.dll" "Prefix"="NDS" "Miniport"="Cisco" Below is the debug log.. 0x87d87000: OEMInterruptEnable: SYSINTR_GPIO_PCIB IRQ=7 SYSINTR=1e OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 30 0x87d87000: OEMInterruptEnable: SYSINTR_GPIO_PCIB IRQ=7 SYSINTR=1e OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 30 0x87d87000: OEMIoControl: IOCTL_HAL_ENABLE_WAKE not supported 0x87d87000: OEMInterruptEnable: SYSINTR_GPIO_PCIB IRQ=7 SYSINTR=1e OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 0x87bb0400: GetCardCRC: CardGetNextTuple returned fails 0x87bb0400: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\PCCARD\PCMCIA\INSTANCE\PCMCIA1\Prefix) returned 2 0x87bb0400: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\PCCARD\PCMCIA\INSTANCE\PCMCIA1\BusPrefix) returned 2 0x87bb0400: pcc_pcm.dll(PCMCIA.DLL) Init 0x87bb0400: ATADISK: PcmciaCallBack(CE_EXCLUSIVE_COMPLETE) 0x87bb0400: ATADISK: PcmciaCallBack(CE_CARD_INSERTION) 0x87bb0400: GetCardCRC: CardGetNextTuple returned fails 0x87bb0400: I_AdvertiseDeviceInterface: AdvertiseInterface({6beab08a-8914-42fd-b33f-61968b9aab32}, 'PCMCIA Card Services', 1) failed 183 0x87b8c400: CheckDll: NDIS.dll returns true 0x87b8c400: NE2000: DLL_PROCESS_ATTACH 0x87b8c400: DetectNE2000: DevType = 3, expected 6 0x87b8c400: NE2000: DLL_PROCESS_DETACH 0x87b8c400: CheckDll: NDIS.dll returns true 0x87b8c400: Cisco DLL_PROCESS_ATTACH Handle=0x87bce010 0x87b8c400: Cisco DetectCisco Routine Handle=0x5 0x87b8c400: Cisco DevType 3 Not Valid 0x87b8c400: Cisco DLL_PROCESS_DETACH OEMInterrupt: NKCallIntChain(IRQ=7) returns 30 0x87d87000: OEMInterruptEnable: SYSINTR_GPIO_PCIB IRQ=7 SYSINTR=1e OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 OEMInterrupt: NKCallIntChain(IRQ=7) returns 3 ... loop.... ... Tag: Kernel can not boot without Kitl Tag: 80691
  - 23
    - Fast Infrared Driver CETK testing Hi, I have developed a Fast IR driver for ARM platform. I am able to transfer the files between my desktop and development board. Though I am not able to transfer bigger files(since I am not using DMA yet), I am successfully able to transfer files of small size. while trying to run the CETK test cases, I found that, all the connection oriented test cases are skipping, and I am just getting the result as SKIPPED: Unable to establish connection to IRTestServer. Following is the procedure I follow. I am running one board as server and I run the following commands s services stop obx0: s irapisrv22 It shows Creating AF_IRDA endpoint IRSRV waiting for connect... Another board I am using as client and I am running the following commands s services stop obx0: s tux -o -d irapi22 -f cesh:irapitest.log Following components are added SYSGEN_IRDA, SYSGEN_WINSOCK, SYSGEN_OBEX_INBOX(file transfer) I have got the same code, passing all the test cases. The only difference is, more components are added to the platform, power management is also introduced. Wrt to the code I didn't do any modifications. Is there anything I missed out. Any help will be greatly appreciated Thanks in advance Tag: Kernel can not boot without Kitl Tag: 80687
  - 24
    - Turing for help: Could you give me a loading address of WINCE 3.0? Ladies and Gentlemen: Could you give me a loading address of WINCE 3.0? I am very glad if you would give me a hand. Yours Sincerely Liu Songhua Tag: Kernel can not boot without Kitl Tag: 80682
  - 25
    - How to boot form DiskOnChip on Mainstone? Hi, Does anyone know how to set the Mainstone jumper so that the device can boot from DiskOnChip rather than internal flash? Thanks very much~ Tag: Kernel can not boot without Kitl Tag: 80677
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Top

Re: Kernel can not boot without Kitl by Sue

Sue
Fri Feb 10 08:27:03 CST 2006

gwes.exe (or one of its dependencies) must not be part of your image then.

Hope that helps,

Sue
sloh@microsoft.com (remove "online" from reply-to address)
http://blogs.msdn.com/ce_base/
_____________________________________________________________
This posting is provided "AS IS" with no warranties, and confers no rights.
_____________________________________________________________

Top

Re: Kernel can not boot without Kitl by Brian

Brian
Fri Feb 10 20:38:16 CST 2006

Thanks.

You are right. Just now, I got the build output information as
follows:

RELFSD: Opening file sdmmc_loader.dll from desktop

RELFSD: Opening file DVM.Dll from desktop

RELFSD: Opening file gwes.exe from desktop

It seems that these three files are not included in the ROM_Image.
Right?

Top

Re: Kernel can not boot without Kitl by Brian

Brian
Fri Feb 10 22:56:08 CST 2006

Sue Loh

Thanks!!!

I have solved the problem...

Top

Re: Kernel can not boot without Kitl by Dean

Dean
Mon Feb 13 08:20:14 CST 2006

Yes. And the problem one is most likely to be gwes.exe.

--
Dean Ramsier - eMVP
BSQUARE Corporation

"Brian" <sunrain_hjb@163.com> wrote in message
news:1139625496.216923.154630@f14g2000cwb.googlegroups.com...
> Thanks.
>
> You are right. Just now, I got the build output information as
> follows:
>
> RELFSD: Opening file sdmmc_loader.dll from desktop
>
> RELFSD: Opening file DVM.Dll from desktop
>
> RELFSD: Opening file gwes.exe from desktop
>
> It seems that these three files are not included in the ROM_Image.
> Right?
>

Top