Issue with IE 6.0 printing for CE 4.2

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - eshell.exe Hi I have got Microsoft Windows CE Debug Shell Version 2.00 and build 0102 in my hand for downloading an image file into a set-top box. The problem is that I have difficulties connecting eshell with the target set-top box. Loading eboot.sre from TFTP server to the set-top box via serial port works (the box gets IP), but after it has finished it drops the address and I cannot connect to the box. There is a possibility to set a static IP for the box, but when pinging the box after setting the static IP in place, I get request time out. I have tried several device names in eshell from IPs to MACs and also the actual box's device name - I assume the device name asked for is supposed to be an IP address? If anybody could tell me what I am doing wrong or how to establish a connection between set-top box and eshell I would be really grateful With bet regards eRKs Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 47010
  - 2
    - Keyboard problem This is the situation: 1)CEPC + Touch screen = working 2)CEPC + Hive based registry = working but there is a keyboard problem 3)CEPC + Hive based registry + Touch screen = black screen Then I've tried this Platform.reg ------------ IF BSP_NOTOUCH ! [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH] "DriverName"="keybddr.dll" ENDIF BSP_NOTOUCH ! [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH] "DriverName"="sc3touch.dll" ... if i set the first [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH] in comment Hive based registry + touch screen = working but there is no keyboard input possible But i want a CEPC with Hive based registry, Touch screen and Keyboard. Could someone help me please? Debug error's -------------- Loaded symbols for 'C:\WINCE420\PUBLIC\I611TESTHIVE\RELDIR\CEPC_X86DEBUG\RELFSD.DLL' 4294770964 PID:a3fe8b82 TID:a3fe8b52 0x83fe89a8: Initobj : Error, continuing (1)... 4294770976 PID:a3fe8b82 TID:a3fe8b52 0x83fe89a8: Initobj : Error, continuing (1)... 4294770990 PID:a3fe8b82 TID:a3fe8b52 0x83fe89a8: Initobj : Error, continuing (1)... Loaded symbols for 'C:\WINCE420\PUBLIC\I611TESTHIVE\RELDIR\CEPC_X86DEBUG\TCPSTK.DLL' 4294798770 PID:23fa053a TID:23fecf76 0x83fa0330: TCPIP: dllentry() 4294798829 PID:23fa053a TID:23fecf76 0x83fa0330: EAP: ERROR - unable to find Dll netlog.dll 4294798889 PID:23fa053a TID:23fecf76 0x83fa0330: EAP: ERROR - unable to find Dll eap.dll Loaded symbols for 'C:\WINCE420\PUBLIC\I611TESTHIVE\RELDIR\CEPC_X86DEBUG\SNMP_HOSTMIB.DLL' 4294809427 PID:23fa053a TID:a3f5dfc2 0x83f5de18: TAPI:OldAddTapiDevice RegQueryValueEx(Tsp) returned 2 4294809541 PID:23fa053a TID:23fecf76 0x83fa0330: >>> Loading module ethman.dll at address 0x03CA0000-0x03CA6000 (RW data at 0x01FCE000-0x01FCE554) 4294814593 PID:23fa053a TID:83ee4ac2 0x83eef800: SNMP: ERROR 2 reading SYSTEM\CurrentControlSet\Services\SNMP\Parameters\PDUBufferLength. 4294852494 PID:a3ea577a TID:63ec7f92 0x83ebe000: NOTIFICATION::XCeRunAppAtEvent 4294852616 PID:a3ea577a TID:63ec7f92 0x83ebe000: ERROR in NOTIFICATION::XCeRunAppAtEvent::Notification subsystem not yet initialized 4294853314 PID:a3ea577a TID:a3fbdf86 0x83e598e8: ERROR: d:\mckendric\public\common\oak\drivers\keybd\laymgr\.\laymgr.cpp line 2783: Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 47008
  - 3
    - How to add evc built components ( exe,dll etc) into NK.bin of PB Dear All, Can anyone tell how to include MFC application/DLL built using EVC++3.0 into PB3.0? Should I also include MFC components separately into the platform? Pls clarify Thanks Vidhya Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 47005
  - 4
    - Please help me... -_-;;; Hello? Please understand my bad English. ^-^;; I have to make touch do work with PXA263 and WM9712. But Wolfson only provide AC97 driver for PXA25X. Though there aren't a lot of difference between PXA25X and PXA26X, the matter is that I haven't made it work. Maybe,, is there anyone who develop with PXA263 and WM9712? Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 47003
  - 5
    - Help! Problem when writing block data to SD Card. I am testing the MMC Controller using Sandisk Sdcard.My platform is Pxa263. Currently,I can initialize the SDcard and get all parameters from the card. The probelm occurs when I try to write a single block of 512 bytes to the card using CMD24.I have set the block length to 512 bytes.After I fill the Txfifo with 32 bytes some times,the Sdcard seems not starting to transmit the data since I check the MMC_STAT register and can not get XMIT_FIFO_EMPTY(the value of MMC_STAT is 0x2100),and later ,the MMC_STAT register will return READ_TIME_OUT(the value of MMC_STAT is 0x2101). I am wondering how READ_TIME_OUT came to? However,If I initialized the card twice ,I can write a single block 512 bytes but can only read 480 byte when I send READ_SINGLE_BLOCK(CMD17) to the card.The card return DATA_TRAN_DONE(the value of MMC_STAT is 0x29c0 ).What's wrong? The following is the sdcard infromation I read from the card: Voltage Range = 2.7V to 3.6V Mfg ID = 035344, Product = SD0320 HW/FW Rev = 4/15, Serial # = 3413248, Date Mfg = March 2002 CSD Version 1.0, MMC Specification Version 1.0 Data Read Access Time 1 = 0x26, Data Read Access Time 2 = 0x0 Maximum Data Transfer Rate = 0x32, Card Command Classes = 0x1F5 Maximum Read Data Block Length = 512 Partial Blocks for Read Allowed Write Block Misalignment Not Allowed Read Block Misalignment Not Allowed, DSR Not Implemented Device Size = 59776 Blocks = 30605312 Bytes Maximum Read Current at VMin = 25mA Maximum Read Current at VMax = 25mA Maximum Write Current at VMin = 25mA Maximum Write Current at VMax = 35mA Device Size Multiplier = 32, Erase Group Size = 640 Blocks Number of Write Protect Groups = 32 Write Protect Groups Enabled No Manufacturer Default ECC, Read to Write Speed Factor = 16 Maximum Write Data Block Length = 512 Partial Blocks for Write Not Allowed, Not Original No Permanent Write Protection, No Temporary Write Protection No ECC Used Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 47002
  - 6
    - SMCLIB problem Dear All, I have a problem in using SMCLIB provided in platform builder. I do the following steps: 1) Open a development platform in platform builder 2) Go to the sources of SMCLIB located in public\common\OAK\drivers\smartcard 3) Open the "open release build directory" command prompt in platform builder 4) Compile the sources of SMCLIB and the smclib.lib is created 5) Open another project in eVC++ which will include smclib.lib and use its functions 6) Build the project 7) The linking error appears I use dumpbin.exe to look into the smclib.lib and find that no functions are exported. However, if I do it as following, there is no linking error even using the same smclib.lib 5) Go to the sources of my project which will include smclib.lib and use its functions 6) Open the "open release build directory" command prompt in platform builder 7) Build my project and my project is successfully built without linking error The difference is using IDE to build and using command prompt to build. Do anyone have any idea? Thanks Wing Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 47001
  - 7
    - About mouse speed control... Hi, all How can I control "mouse move speed",like 2000/xp to control mouse motion speed !! Thanks for your advise! Hanko Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 47000
  - 8
    - BUG: Buildrel does not implement -f optional paramater correctly The buildrel process does not implement the -f parameter correctly if you specify -f buildrel still copies binaries. Upon close examination it is due to a bug in bldrel1.bat line 72 currently reads: if "%__BLDRELNOBIN"=="1" goto endif_400 it should be: if "%__BLDRELNOBIN%"=="1" goto endif_400 NOTE: the trailing "%" is missing on the %__BLDRELNOBIN% expansion thus making the comparison always false. With the above corrections using buildrel -f -u will make simple updates MUCH faster! My previously posted UPCONFIG can be altered to use buildrel -f -u to cover both the project configuration and platform instead of just covering the platform as it does now if this fix is applied. -- BGIN UPDATED UPCONFIG.BAT: @IF NOT "%_ECHOON%" == "1" ECHO OFF setlocal call sysgenplatform %_TARGETPLATROOT% buildrel -f -u endlocal --END UPCONFIG.BAT While normally I recommend not altering common code ESPECIALLY the build system files, this is a clear BUG with a trivial resolution and would only be encountered by individual devs during development. It would have no effect on a QA build server. So , I don't see any issues making this small change. -- Steve Maillet (eMVP) Entelechy Consulting smaillet_AT_EntelechyConsulting_DOT_com Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46997
  - 9
    - QFE 031203_KB812950 have problem Hello : I have updated this QFE.But the network can't be loaded by device.exe.The device.exe clue to this message: Data Abort: Thread=8fc64c34 Proc=8d626a30 'device.exe' AKY=00000005 PC=03341bb4 RA=03341b94 BVA=06000054 FSR=00000007 My evironment is WINCE.NET 4.2,ARMV4(S3C2410),network chip(cs8900A). The another question is my network worked normal on wince.net 4.1 but randomly disconnects on 4.2. So I updated this QFE .As a result,it is more worse than before. Thank you very much! Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46989
  - 10
    - IRDA on x86 laptop with CEPC, OPL-SAX driver, ISA ATAPI driver Hi, sorry to ask these question, but I am very new to this. I am trying to get IRDA working on a Toshiba laptop. The laptop has two serial ports: COM1 and COM2, where COM2 is used as the infrared port. I´ve read through the articles and found out, that CE uses the hardware COM1 port as the debug port (if not changed in the kernel), therefore I changed COM1 to 2F8h/IRQ3 and the infrared port to 3E8h/IRQ4. I also changed the platform.reg the following way: [HKEY_LOCAL_MACHINE\Comm\Irsir1\Parms] "BusNumber"=dword:0 "BusType"=dword:0 ; default setting ; "Port"=dword:1 "Port"=dword:2 I included two serial port drivers and ActiveSync in my project. The problem: I am not able to choose IrDA in "PC Connection" in the control panel, so I am not able to establish a connection via IrDA. I´ve searched MSDN and the newsgroup here as well but I am not able to find information what to do step by step to implement IrDA. The laptop I am using has no PCI bus, so the standard ATAPI drivers are not working, because they are for PCI only. I´ve found an article in this newsgroups which describes the following changes: [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Atapi] "Prefix"="IDE" "Dll"="atapi.dll" "Order"=dword:2 "IoBase"=multi_sz:"1f0", "3f4", "170" ,"374", "0ffa0" "IoLen"=multi_sz:"8", "4", "8" ,"4", "10" "Irq"=dword:0e "Settings"=dword:2 "DeviceId"=dword:0 "Flags"=dword:1000 "ConfigEntry"="GenericConfig" "IClass"=multi_sz:"{CDDC3621-3512-4b3f-BB6F-B4DD5E061795}" [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Atapi\Device0] "Prefix"="DSK" "Dll"="atapi.dll" "DeviceId"=dword:0 "Ioctl"=dword:4 "Flags"=dword:1000 "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" Unfortunately the changes in genericide.reg don´t do anything and my harddisk is not recognized. The laptop is also using a Yamaha OPL3-SAx sound card for which I was not able to find a driver. Does anybody know if this soundcard is compatible to any of the cards supported by CE.NET 4.2? Thank you very much for your help. Cheers, Malte Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46985
  - 11
    - MFC Problem Urgent! "Cannot add new member" error Hi everyone, I have been using MFC automated control editor to add handlers. Now when I try right clcik on the dialog window to add events I get a popup error "Cannot add new member", when I click OK no event handler/message window shows to allow me to choose the events messages. Please help! I cannot do anything more. Adolph. Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46984
  - 12
    - How to send WM_IME_COMPSITION message? Dear steve: My name is wangjie ,I am Writing the input method editor.I don't know that how to send WM_IME_COMPISION message in wince.net.Can you tell me ?Thank you very much. Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46982
  - 13
    - SMCLIB problems Dear All, I have a problem in using SMCLIB provided in platform builder. I do the following steps: 1) Open a development platform in platform builder 2) Go to the sources of SMCLIB located in public\common\OAK\drivers\smartcard 3) Open the "open release build directory" command prompt in platform builder 4) Compile the sources of SMCLIB and the smclib.lib is created 5) Open another project in eVC++ which will include smclib.lib and use its functions 6) Build the project 7) The linking error appears I use dumpbin.exe to look into the smclib.lib and find that no functions are exported. However, if I do it as following, there is no linking error even using the same smclib.lib 5) Go to the sources of my project which will include smclib.lib and use its functions 6) Open the "open release build directory" command prompt in platform builder 7) Build my project and my project is successfully built without linking error The difference is using IDE to build and using command prompt to build. Do anyone have any idea? Thanks Wing Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46976
  - 14
    - Problems in SMCLIB files Dear All, I find a problem in SMCLIB files. If you try to compile the sources of SMCLIB provided by platform builder, you will get a smclib.lib file. However, when I use dumpbin.exe to look insider, I see that it doesn't export any methods. This causes linking error when I try to open another problem and include smclib.lib. The steps of what I have done are: 1) Open a platform in platform builder 2) Go to the source code of SMCLIB located on public\common\oak\driver\smartcard 3) Open the "open build release directory" command prompt in platform builder 4) Build the source of SMCLIB 5) Open another project, e.g. ABC, in eVC++ 6) Include the smclib.lib 7) Build my project 8) Linking error in functions of smclib.lib However, there is no linking error when I do the following: 1) Open a platform in platform builder 2) Go to the source code of SMCLIB located on public\common\oak\driver\smartcard 3) Open the "open build release directory" command prompt in platform builder 4) Build the source of SMCLIB 5) Go to my source code, e.g. ABC 6) Open the "open build release directory" command prompt in platform builder 7) Build it in command prompt The difference is building in command prompt and building in IDE. Does anyone have any idea about this? Thanks Wing Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46975
  - 15
    - Serial Port Driver Optimizations Sorry about the previous partial message. I am working on a project that uses proprietary X86 hardware, 6 serial ports, PCMCIA, USB and a host of other hardware. We are using CE 4.0 with evc++ 4.0, ATL, MFC and COM for an application that includes numerous *.exes and even more *.dlls. Processor loading for the app is generally low (~35%) but can go to 100% for seconds in response to external inputs. Occasionally, there is a RX FIFO overflow on one of the serial comm ports - this port has a 64 byte FIFO, is running at 38.4 Kbaud and ~20% of its bandwidth is being used. One of my embedded RTOS colleagues has suggested that the problem lies in the serial port driver and believes that the problem can be eliminated by optimizing the serial port driver for execution speed. Part of this optimization may include moving a portion of the driver to the ISR. I suspect that other CE developers may have experience in this area and I would be interested in any comments or suggestions. Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46974
  - 16
    - Serial Port Optimizations I am working on a project that uses proprietary X86 hardware, 6 serial ports, PCMCIA, USB and a host of other hardware. We are using CE 4.0 with evc++ 4.0, ATL, MFC and COM for an application that includes numerous *.exes and even more *.dlls. Processor loading for the app is generally low (~35%) but can go to 100% for seconds in response to external inputs. Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46970
  - 17
    - Changing Domain Suffix On a PPC2003 device: I'm trying to experiment with changing the domain suffix of a miniport interface after it has already obtained a DHCP lease with a domain suffix. I noticed that changing the following registry value works. HKLM\Comm\<adapter>\Parms\TCPIP\Domain Unfortunately, this only works for a while. After some random amount of time, some process changes the registry value back to the domain suffix obtained from the DHCP lease. The amount of time seems random, and there are no other user processes running as seen in Control_Panel>Memory>Running_Programs. Does anyone know why that is? Is there another way to do this? Thanks, Eugene. Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46963
  - 18
    - Hive-based registry problems I am attempting to configure the hive-based registry on my Au1100 based board with CE.NET. I want to persistent registry to be located on a compact flash card (ATADISK). During system boot, everything just stops. I think this is related to the following debug messages: 5446 PID:820b3292 TID:e2096662 0x82096d18: ATADISK: Attempting to register with PCMCIA.DLL 5547 PID:820b3292 TID:e2096662 0x82096d18: ATADISK: CardMapWindow(pATAReg) failed 30 5548 PID:820b3292 TID:e2096662 0x82096d18: ATADISK: CardMapWindow(pATAReg) failed 30 5548 PID:820b3292 TID:e2096662 0x82096d18: ATADISK: CardMapWindow(pATAReg) failed 30 5548 PID:820b3292 TID:e2096662 0x82096d18: ATADISK: CardMapWindow(pATAReg) failed 30 5548 PID:820b3292 TID:e2096662 0x82096d18: ATADISK: CardMapWindow(pATAReg) failed 30 5549 PID:820b3292 TID:e2096662 0x82096d18: ATADISK: pATAReg = 0x150000 I stepped into the code and the ResourceRequest() function is failing. I'm thinking I must have neglected to wrap a registry key in the HIVE BOOT SECTION comment. Any suggestions? -- Frank D. Lombardo Turning Point Technology, Inc. Frank_AT_TurningPointOnline_DOT_com Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46961
  - 19
    - Direct3D on Windows CE .NET 4.2 Geode Display Driver Does anybody knows if we can use Direct3D with Windows CE .net 4.2 with National Geode x86 series . Everytime we try to load the D3D Driver with Direct3DCreate8 , it return with error code NOT_AVAILABLE . thanks Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46946
  - 20
    - where is filesys.exe source in wince4.0? Hello, I am getting exceptions in filesys.exe. Per a suggestion from an earlier post, I would like to try to look at the .map file and .cod files along with the exception address to find out where the trouble is occurring. But I can't find the source code for filesys.exe anywhere. I see the built module, but can't find the source. I expected to find a sources file with TARGETNAME=filesys somewhere in my directory tree, but no luck. Anyone know where I should be looking for this code? thanks, Stuart Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46945
  - 21
    - CE 3.0 Activesync 3.1 connects but 3.5 does not I have several CE 3.0 platforms (MIPS, sh3, and x86) that connect just fine over tcp/ip with activesync 3.1 installed on my desktop but not with activesync 3.5 (and higher). I can see in a network traffic that that wcescomm closes the socket after the first data packet comes over from the device. I always use guest only connections, and I have all the registry keys manually populated instead of using a GUI to populate connectoids and such. Is there some new requirement beginning with activesync 3.5 that repllog needs to look up in the registry and pass along in that first packet? This should work, shouldn't it? Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46942
  - 22
    - USB Driver load before Device manager loads driver Hi, is it possible to load a USB driver, when the USB device is attached at boot, before the device manager loads my driver? Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46941
  - 23
    - Mouse Coursor Dear all, How I can change the mouse cursor colors ? Thanks Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46939
  - 24
    - app level debug over eVC++ Hello, I would like to use PB 4.0 to build a platform and an SDK that application developers can use to write apps in eVC++. For them to be able to run debug application builds and step through their code, is it a requirement that they be working with a debug build of the nk.bin platform, or can this be done with a release version? Is it a requirement that the platform include Kernel Debugging? thanks for the advice, Stuart Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46935
  - 25
    - CEProcessorType PXA25x I have looked at the past posts on this issue in google. We've had our CEProcessorType set to PROCESSOR_ARM720 since we thought this was the recommended best-fit for the PXA25x (XSCALE) processors. We've just been trying to install some 3rd party PPC2003 drivers and the activesync installation doesn't work unless this is set to STRONGARM. There is something in the newsgroup about EVC debugger problems with the STRONGARM setting on some bsp versions. My question is, what depends on this setting ? If I change it to STRONGARM, I can address the activesync installation issue, but I'm really worried about breaking something else. Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46924
- Next
  - 1
    - Using the IXDP425 BSP I am using the newly released IXDP425 BSP. Its at http://developer.intel.com/design/network/products/npfamily /ixp425swr1.htm#bsp I downloaded all of the stuff available from the website and I have followed the directions for Creating a Gateway Platform in the Software Release Notes. The following error occurred 3 times (from kern, kernkitl, and kernkitlprof) when I was trying build the platform: ...\wince420\platform\intel_ixdp425 \kernel\buildexe\kern\hal.lib(cfw_ixp425.obj) : error LNK2001: unresolved external symbol dwNKARMFirstLevelSetBits I did a search for 'dwNKARMFirstLevelSetBits' but I wasn't able to find it anywhere. Where should this be coming from? Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46921
  - 2
    - Zero Config failed in adding IPv6 support ? Dear all, I use NETUI as sample to write my own Wireless Zero Config program. Everything is fine before adding "TCP/IPv6 Support" component at Platform Builder. After adding "TCP/IPv6 Support", I can't get any available Access Point IDs. But it works fine again after removing "TCP/IPv6 Support" at my PB 4.2. Anybody could give me hints to solve it ? Thanks in advance. Regards, Oliver Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46917
  - 3
    - Platform.reg added : how to speed up platform build ? Hello, Just a quick question : I have to modify my platform.reg and project.reg files very often these days. I tried, as I understood (maybe I'm wrong) to use the makeimg.exe tool on the command line, to speed up the creation process of the platform, instead of calling "Rebuild Platform" from the Build menu. But my changes are not taken if I use makeimg.exe. Did I miss something ? Is there anything else to add on the command line for instance? Or a set of commands to launch before ? Thanks in advance. Regards. Gabriel. Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46916
  - 4
    - How to include Compact Framework Service Packs in Windows CE 4.1 Images Hello, up to now there are two Service Packs for the .Net Compact Framework available. As I have read on the download page for the SP2 it can be installed on every Windows CE 4.1 image. Because I am using a HMI device without battery backedup RAM I have to implement the Service Pack for the Compact Framework in my Windows CE 4.1 Image. My questions: - What is the recommended procedure to implement the Service Pack in my Windows CE 4.1 image? - Why is no Compact Framework Service Pack 1 (2) QFE (like the QFE for CE 4.2) for Windows CE 4.1 available? Regards Peter Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46915
  - 5
    - Making an NDISUIO clone Hi, I want to have an NDISUIO type protocol driver running along with NDISUIO. I would like to use this as the means of communication to some miniport drivers that we have running. Eventually, I would like to make this smaller and more efficient than NDISUIO for my purpose. To do this, I have 1) Created a .regf with the entry: [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\XUIO] "Prefix"="XIO" "Dll"="xio.dll" "Index"=dword:1 "Order"=dword:3 2) Created a .bibf entry for xio.dll. 3) Correspondingly, I have also changed the names of the UIO_XXX functions to XIO_XXX functions. This doesnt seem to work right now, XIO_Init is failing to register the protocol driver. Later, calls by applications to open the device "XIO:" are failing as well. What I want to know is- If I change all the strings/symbols in NDISUIO source that are specific to NDISUIO, is this process eventually going to produce a clone of NDISUIO that I can optimise, or do I have to modify the source-code for NDISUIO in some non-trivial way to accomplish this? Thanks, Vamshi Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46914
  - 6
    - how to add dll from one platform to another Hi, I am trying to add a dll file present in one platform to another platform using the loadext command in the cesh. This does not seem to load the dll. When i try to rebuild the OS the BSP debug folder does not contain this new dll. What is the procedure to register or load a dll in windows ce.net ? Thanks in advance, Annie Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46910
  - 7
    - DirectDraw in PB4.2 ??? Hi All, The buildDDHALinfo function in wince 4.2 display driver can't be called. But i already add DDRaw component in my project. Does anyone know what additional I need? Or the display driver need to be modified for PB4.2. This DirectDraw function is working properly in PB4.1. I just directly transfer to PB4.2. Thanks Rick Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46908
  - 8
    - The hidden pointer in Platform Builder 4.2 ?? Hi All, The pointer will auto disappear in WinCE4.2 OS which generated by platform builder 4.2. But it sometime is showed during some operating. I know this is the proper definition in PB4.2, there is no this design in PB4.1. Our customer don't want to hide the pointer automatically. How can I let the pointer always appear as previous setting. Is this available? To set registry or modify code?? thanks Rick Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46907
  - 9
    - IPSM vs StrataFlash NOR Driver in PB 4.2 Dear All: I get a little confused with the two componets: 1).IPSM version get from Intel supports. 2).Windows CE .Net 4.2 bundled MSFlash drivers. I use Intel XScale and NOR Strata Flash as my target platform processor and boot ROM, and I take IPSM(3.7/3.6/3.5) to divide a part of flash memory as my persistent storage device for some important files and registry. Anytime when I enabled the IPSM, and add the feature of MSFlash driver, the system hangs at the point of loading IPSM's DLL driver. But if I disabled the registry key: [HKEY_LOCAL_MACHINE\init\BootVars] "Start DevMgr"=dword:0 ; usually is dword:1 for IPSM The system will not get hanged and can keep on running, then the Hive-Based registry will gone. I want to keep my IPSM settings and load the MSFlash driver into my OS image, thus I can read/write my flash memory for OS image(nk.bin) updating under the control of WinCE. Is this possible? Or I have to porting the strata flash device driver under \public\common\oak\drivers\block\msflashfmd to my new stream driver (built-in dll) for the application usage, is this possible? Any response will be very appreciated. Best Regards, Min-Chieh Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46900
  - 10
    - Dec QFE any idea when the next QFE rollup is going to be released? Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46898
  - 11
    - USB Driver Installation Dear All, I would like to ask to install a USB driver to a WinCE board, is that I only need to place the dll to Windows folder and then plug in the USB device. After that, WinCE OS will prompt a dialog to ask for the driver name. Then I enter the driver name. Is it ok? Or I must make the CAB file or do any setting before? Thanks Wing Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46897
  - 12
    - 'Rebuild' takes so long time... Hello. I modified some code in "PUBLIC\COMMON\OAK|DRIVERS\TCH_CAL\calibrat.c". Do I have to 'Rebuild'? It's so long time.. :( Is there any way that takes time less than 'Rebuild'? Regards. Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46895
  - 13
    - no more USB interrupt after StrataFlash access Hello~ I'm developing with pxa255, 32M(16+16)strataflash. I'm making firmware that upgrade ImageFile through usb connection. After ImageFile download to ram through usb connection, write the file to flash. But I can't access flash after ImageFile download to ram. Conversely I can't have no more usb interrupt after flash access(erasing or writing). So I can't download Imagefile to ram through usb connection. help me please.. Thanks.. Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46893
  - 14
    - running network and dialup connection settings Using my application, I need to run the "Network and dial- up Connections Settings" that is located in control panel. Does anyone know what winapi function to call to run it? or maybe a separate exe file to call? Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46891
  - 15
    - IM Driver on ppc 2003 I've successfully implemented IM driver on Pocket PC 2002. and then I tried to implemented IM driver on Pocket PC 2003. I could complie my source codes of pocket pc 2002 on pocket pc 2003. But it doesn't work I am sure that there're no error while driver is loaded and running. I knew that the only difference between pocket pc 2002 and 2003 is virtual miniport. On pocket pc 2002, virtual miniport works as my network adapter after MiniportInitialize function called. but On Pocket pc 2003, virtual miniport doesn't work as my network adapter. I also modified passthru example in pb 4.2. it does same. What's the problem? Thanks in advance Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46890
  - 16
    - Debugger stops communicating after download Arrgh, I can't debug from my PC, but other PC's can connect to my target and debug OK. On my PC, the image downloads OK, and I get debug output until "Finished re-loading kernel modules": >>> Loading module NK.EXE at address 0x80300000-0x803AB000. Kernel debugger connected (KDBG stream opened). Kernel Version 1169 loaded at 0x80300000, data relocated at 0x81e16000 Debugger connection established (Target CPU is ARM). Loaded symbols for NK.EXE' Loaded symbols for KD.DLL' Finished re-loading kernel modules. After this, nothing happens, except every 2 seconds, the host sends an "EDBG" message to the device. Other workstations can download my images to my hardware (and hit breakpoints) without any problems. In other words, I believe the hardware (incl. network), bootloader, and the image itself is OK. This problem is similar to the platbuilder thread "Wince hang after download" last October http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&selm=ddba77ec.0310070715. 1b159f98%40posting.google.com but I couldn't make that solution work for me. But I think the solution will be similar - some sort of problem with the current state of my Platform Builder instance. Has anyone else seen this, or have any ideas what might be happening? I can provide dumps of the network traffic if that's useful. Thanks Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46885
  - 17
    - Bluetooth Headset BTPLAY sound btplay headsetctl Hi there, could anyone help me with the following: I have a BT module which can use BCSP/UART as protcol to communicate with my embbeded device, running WINCE 4.2. It can search for devices,pair, and even do SLOW file transfer over BT. However the headsetfunctionality does not work yet. I can pair with my headset (tried different ones) via the control panel, connect to it via "headsetctl" (the 'Start button'), but when I then run "btplay clapton.wav" then I get the following messages at the command prompt: \>btplay clapton.wav "clapton.wav" M0B 22050 Hz 212892 bytes 9654 ms waveOutOpen failed mr=00000002 Ran for 613 ms \> Debug output produces this: Loaded symbols for 'C:\WINCE420\PUBLIC\BLUETOOTHTEST\RELDIR\IDP_PXA250_NET_04.00.02_ARMV4IDEBUG\BTPLAY.EXE' 233791 PID:43b1246e TID:43bacdba 0x83a74818: Chunk: "fmt " size=0x00000012 233794 PID:43b1246e TID:43bacdba 0x83a74818: Chunk: "data" size=0x00033f9c 233819 PID:43b1246e TID:43bacdba 0x83a74818: Console NOT redirected for process 0x42 234243 PID:63fa64e2 TID:3b7c306 [RFCOMM] 234246 PID:63fa64e2 TID:3b7c306 [PORTEMU] COM_Read 0x0005e148 16 bytes completed, 0 bytes read, status 0 234249 PID:63fa64e2 TID:3b7c306 [RFCOMM] 234251 PID:63fa64e2 TID:3b7c306 [PORTEMU] COM_Read 0x0005e148 234725 PID:43b1246e TID:43bacdba 0x83a74818: <<< Unloading module btplay.EXE at address 0x1C010000-0x1C015000 Unloaded symbols for 'C:\WINCE420\PUBLIC\BLUETOOTHTEST\RELDIR\IDP_PXA250_NET_04.00.02_ARMV4IDEBUG\BTPLAY.EXE' My registry settings are like this: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\ScoWav] "Direction"=dword:0 "AirCoding"=dword:0 "ConnectInTimeout"=dword:10000 "8BitSignedSamples"=dword:1 [HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\AudioGateway] "MapAudioToPcmMode"=dword:0 (--->I've tried this @ 1 too) Why doesn't this setup work (wavplay.exe and wavrec.exe work though). Thanks, Wesley Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46879
  - 18
    - Questions about Installable ISR Hello, I'm back again with some questions about installable ISR (I'm beginner in driver development). I'm trying for an ISA board to build an IISR. The IISR dll is created and it is loaded without any problem. In the application that loads the dll I do: isrHandle = LoadIntChainHandler(IsrDLL, ISRHandler, irqNr); and I get a valid handle. I see that my CreateInstance from dll is called (I do nothing special there ... ). So far so good ... until I want to get a SYSINTR via the call: KernelIoControl(IOCTL_HAL_REQUEST_SYSINTR, &irqNr, sizeof(irqNr), &Info.SysIntr, sizeof(Info.SysIntr), &returnedBytes) which retruns an error (87 - Invalid parameter). I ignored this, but my driver gets no interrupts (the ISRHandler is not called at all). Now questions: 0. There is any way to list all the mapped interrupts ? Something like the resource viewer ? 1. Do I need to get a SYSINTR (I have only one device per INT) ? 2. Do I have to do some special calls to enable or initialize the interrupt ? 3. The board memory was accessible in DOS mode under the address 0xD000:0000 size 16k. To get access to the board memory do I have to use TransBusAddrToStatic or MmMapIoSpace ? 4 If MmMapIoSpace is used how do I specify the memAddress ? As 0xD000 or 0xD0000 ? The PVOID returned by MmMapIoSpace can be used to read the memory directly ? 5. If TransBusAddrToStatic is used how do I specify the BusAddress ? As 0xD000 or 0xD0000 ? The PPVOID MappedAddress represent what in fact ? A buffer ? How do I read from it ? Just I do a cast and read bytes ? 6. Do I need to put something in the registry that the kernel will read ? (I ask this because the the "Installable ISRs with Drivers" topic in the help file speak about registry ... ) I know the GIISR example but unfortunately the mechanism is not extremely clear for me ! Please help ! Thank you, Florin Mihut. Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46866
  - 19
    - About BinFS I have read the documents in PB's help. But I don't know well about BinFS. Can you tell me about it more? Regards. Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46865
  - 20
    - a client class - procedure to create ? PB 4.1 Dear experts, this question relates to PB 4.1. Initially the platform chosen is the PB 4.1 Thin Client with the browser. Then, Citrix ICA client is added (using guidelines from Citrix. BTW this does not add new client class with icons or bitmaps). All that works almost OK. However recently a customer desired that we will make custom image for them with a new type of client ( maybe X11 or so, customer has the code for it). Looking at PB documentation I only was able to find little information about how to add a new client class to existing thin client framework. In particluar, in the file C:\WINCE410\PUBLIC\RDP\OAK\UIT\SHELL\TASKMAN\wbtclnts.h there are comments which say that ///// A user can define 0 or more "connections" using any of the clients defined in the system. A connection uses exactly one client; there can be 0 or more connections defined for each client. Clients and connections are defined in the registry. The set of clients is fixed when the WBT executable image is built; there is no UI for adding a new new client. But there is of course a UI to allow the WBT user to define new connections. /// While adding a new client in registry is somewhat simple procedure, should we then also change the C++ code accordingly to match that increased number of clients from registry ? In particluar, should the enum CLIENT_CLASS { TERMINAL_SERVER_CLIENT, // 0 WEB_CLIENT, // 1 // If you add another client class, add it right before NUM_CLIENT_CLASSES. NUM_CLIENT_CLASSES // }; structure be changed as well ? Is it the only place to add new client in C++ code ? Please advise if there is a documentation or procedure how to add new client class to existing client class framework ( enums, what client class to select, icons, bitmaps, etc.) ? Sincerely Sergei Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46864
  - 21
    - Design Issue: MDD/PDD vs. UAM We have a dual processor system with a custom dsp and a ARM9 processor. Arm9 is the master of the chip and we have certain protocols to communicate with the dsp and execute tasks(especially audio decoding) on it. Windows CE will be the OS which will be running on the Arm. The following figure shows the data flow for the audio data. ED ------- DD ------ -------------- ---| DSP |---->| DMA |--->| Audio Device | ------- ------ -------------- ED = Encoded Data, DD = Decoded Data We can access the audio device (and DMA) either via the Arm CPU or the DSP. In our current audio architecture, we use a MDD/PDD model where we send all sorts of encoded and raw PCM data to the DSP for playback. ARM is used only as a facilitator. We now want to extend our solution to support multiple audio tasks as our DSP is capable of handling more than one conversion at a time. For example we can be playing MP3 and simultaneously write some other data(decoded) to the disk. Is UAM the way to go for us??? Can someone explain how do we go about implementing UAM. We might later add a mixer to the DSP where we can play data from multiple sources simultaneously. Does this affect our choice of UAM. Thanks and Best Regards, Ank P Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46863
  - 22
    - CEPC-user component-MFC .exe-how to add? Dear Tech-Gurus, I have built a MFC application in embedded VC++ 3.0 in x86 build. MFC component is statically linked to the application(I have built the app with MFC as static library). I want to add this evc built .exe as my user component to be used in the CEPC. Can any one pls detail me the steps to be followed in acheiving the above. I did the below 1) Include the built .exe as a user component 2) Included Catalog/runtimes/VC/mfc component 3) Built the platform The following logs appears 0x81e88b28: LoadOneLibrary failure on AYGSHELL.dll (error 0x0000007e)! 0x81e88b28: CreateNewProc failure on \Windows\TestResMan.exe! 0x81ea5800: ShellExecEx(\Windows\TestResMan.exe, (NULL)) FAILED GLE=126 IDS=307 0x81ea5800: DlgMgr: FindDlgItem id 1 returning NULL. Can any one pls bring to light of whats going wrong. Thank u very much for ur time and help. Cheers, Lakshman Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46852
  - 23
    - quick money To: everyone Topic: a way to make money quick easy and legally=20 HOW TO TURN $6 into $6,000 !!!!!! Remember: play FAIRLY=20 and HONESTLY and this will really work. I found this on a=20 bulletin board and decided to try it. A little while back,=20 I was browsing through newsgroups, just like you are now,=20 and came across an article similar to this that said you=20 could make thousands of dollars within weeks with only an=20 initial investment of $6.00! So I thought, Yeah right,=20 this must be a scam,but like most of us, I was curious, so=20 I kept reading. Anyway, it said that you send $1.00 to=20 each of the 6 names and address stated in the article. You=20 then place your own name and address in the bottom of the=20 list at #6, and post the article in at least 200=20 newsgroups. (There are thousands) No catch, that was it.=20 So after thinking it over, and talking to a few people=20 first, I thought about trying it. I figured: what have I=20 got to lose except 6 stamps and $6.00, right? Then I=20 invested the measly $6.00. Well GUESS WHAT!!... within 7=20 days, I started getting money in the mail! I was shocked!=20 I figured it would end soon, but the money just kept=20 coming in. In my first week, I made about $25.00. By the=20 end of the second week I had made a total of over=20 $1,000.00! In the third week I had over $10,000.00 and=20 it's still growing. This is now my fourth week and I have=20 made a total of just over $42,000.00 and it's still coming=20 in rapidly. It's certainly worth $6.00, and 6 stamps, I=20 have spent more than that on the lottery!! Let me tell you=20 how this works and most importantly, why it works....Also,=20 make sure you print a copy of this article NOW, so you can=20 get the information off of it as you need it. I promise=20 you that if you follow the directions exactly, that you=20 will start making more money than you thought possible by=20 doing something so easy! Suggestion: Read this entire=20 message carefully! (print it out or download it.) Follow=20 the simple directions and watch the money come in! It's=20 easy. It's legal. And, your investment is only $6.00 (Plus=20 postage) IMPORTANT: This is not a rip-off; it is not=20 indecent; it is not illegal; and it is virtually no risk -=20 it really works!!!! If all of the following instructions=20 are adhered to, you will receive extraordinary dividends.=20 PLEASE NOTE: Please follow these directions EXACTLY, and=20 $50,000 or more can be yours in 20 to 60 days. This=20 program remains successful because of the honesty and=20 integrity of the participants. Please continue its success=20 by carefully adhering to the instructions. You will now=20 become part of the Mail Order business. In this business=20 your product is not solid and tangible, it's a service.=20 You are in the business of developing Mailing Lists. Many=20 large corporations are happy to pay big bucks for quality=20 lists. However, the money made from the mailing lists is=20 secondary to the income which is made from people like you=20 and me asking to be included in that list. Here are the 4=20 easy steps to success: STEP 1: Get 6 separate pieces of=20 paper and write the following on each piece of=20 paper;PLEASE PUT ME ON YOUR MAILING LIST. Now get 6 US=20 $1.00 bills and place ONE inside EACH of the 6 pieces of=20 paper so the bill will not be seen through the envelope=20 (to prevent thievery). Next, place one paper in each of=20 the 6 envelopes and seal them. You should now have 6=20 sealed envelopes, each with a piece of paper stating the=20 above phrase, your name and address, and a $1.00 bill.=20 What you are doing is creating a service. THIS IS=20 ABSOLUTELY LEGAL! You are requesting a legitimate service=20 and you are paying for it! Like most of us I was a little=20 skeptical and a little worried about the legal aspects of=20 it all. So I checked it out with the U.S. Post Office (1- 800-725-2161) and they confirmed that it is indeed legal!=20 Mail the 6 envelopes to the following addresses: #1) Jeff=20 Millan 1113 N. 19 =BD McAllen,TX 78501 #2) simon white 23=20 mason road stroud glostershire eng #3) Wayne Clark 146=20 Poningo St. Port Chester, NY 105 #4) T. brayford dotburn=20 park road stroud glos eng gl5 2jf #5) Alan Meyer 17725 W.=20 Belmont Ave. Kerman, CA 93630 #6) Joshua North 17415 W.=20 Whitesbridge Kerman, CA 93630 STEP 2: Now take the #1 name=20 off the list that you see above, move the other names up=20 (6 becomes 5, 5 becomes 4, etc...) and add YOUR Name as=20 number 6 on the list. STEP 3: Change anything you need to,=20 but try to keep this article as close to original as=20 possible. Now, post your amended article to at least 200=20 newsgroups. (I think there are close to 100,000 groups)=20 All you need is 200, but remember, the more you post, the=20 more money you make! This is perfectly legal! If you have=20 any doubts, refer to Title 18 Sec. 1302 & 1341 of the=20 Postal lottery laws. Keep a copy of these steps for=20 yourself and, whenever you need money, you can use it=20 again, and again. PLEASE REMEMBER that this program=20 remains successful because of the honesty and integrity of=20 the participants and by their carefully adhering to the=20 directions. Look at it this way. If you are of integrity,=20 the program will continue and the money that so many=20 others have received will come your way. NOTE: You may=20 want to retain every name and address sent to you, either=20 on a computer or hard copy and keep the notes people send=20 you. This VERIFIES that you are truly providing a service.=20 (Also, it might be a good idea to wrap the $1 in dark=20 paper to reduce the risk of mail theft.) So, as each post=20 is downloaded and the directions carefully followed, six=20 members will be reimbursed for their participation as a=20 List Developer with one dollar each. Your name will move=20 up the list geometrically so that when your name reaches=20 the #1 position you will be receiving thousands of dollars=20 in CASH!!! What an opportunity for only$6.00 ($1.00 for=20 each of the first six people listed above) Send it now,=20 add your own name to the list and you're in business! --- DIRECTIONS ----- FOR HOW TO POST TO NEWSGROUPS------------=20 Step 1) You do not need to re-type this entire letter to=20 do your own posting. Simply put your cursor at the=20 beginning of this letter and drag your cursor to the=20 bottom of this document, and select 'copy' from the edit=20 menu. This will copy the entire letter into the computer's=20 memory. Step 2) Open a blank 'notepad' file and place your=20 cursor at the top of the blank page. From the 'edit' menu=20 select 'paste'. This will paste a copy of the letter into=20 notepad so that you can add your name to the list. Step 3)=20 Save your new notepad file as a .txt file. If you want to=20 do your postings in different settings, you'll always have=20 this file to go back to. Step 4) Use Netscape or Internet=20 explorer and try searching for various newsgroups (on-line=20 forums, message boards, chat sites, discussions.) Step 5)=20 Visit these message boards and post this article as a new=20 message by highlighting the text of this letter and=20 selecting paste from the edit menu. Fill in the Subject,=20 this will be the header that everyone sees as they scroll=20 through the list of postings in a particular group, click=20 the post message button. You're done with your first one!=20 Congratulations...THAT'S IT! All you have to do is jump to=20 different newsgroups and post away, after you get the hang=20 of it, it will take about 30 seconds for each newsgroup!=20 **REMEMBER, THE MORE NEWSGROUPS YOU POST IN, THE MORE=20 MONEY YOU WILL MAKE!! BUT YOU HAVE TO POST A MINIMUM OF=20 200** That's it! You will begin receiving money from=20 around the world within days! You may eventually want to=20 rent a P.O.Box due to the large amount of mail you will=20 receive. If you wish to stay anonymous, you can invent a=20 name to use, as long as the postman will deliver it.=20 **JUST MAKE SURE ALL THE ADDRESSES ARE CORRECT.** Now the=20 WHY part: Out of 200 postings, say I receive only 5=20 replies (a very low example). So then I made $5.00 with my=20 name at #6 on the letter. Now, each of the 5 persons who=20 just sent me $1.00 make the MINIMUM 200 postings, each=20 with my name at #5 and only 5 persons respond to each of=20 the original 5, that is another $25.00 for me, now those=20 25 each make 200 MINIMUM posts with my name at #4 and only=20 5 replies each, I will bring in an additional $125.00!=20 Now, those 125 persons turn around and post the MINIMUM=20 200 with my name at #3 and only receive 5 replies each, I=20 will make an additional $626.00! OK, now here is the fun=20 part, each of those 625 persons post a MINIMUM 200 letters=20 with my name at #2 and they each only receive 5 replies,=20 that just made me $3,125.00!!! Those 3,125 persons will=20 all deliver this message to 200 newsgroups with my name at=20 #1 and if still 5 persons per 200 newsgroups react I will=20 receive $15,625,00! With an original investment of only=20 $6.00! AMAZING! When your name is no longer on the list,=20 you just take the latest posting in the newsgroups, and=20 send out another $6.00 to names on the list, putting your=20 name at number 6 again. And start posting again. The thing=20 to remember is: do you realize that thousands of people=20 all over the world are joining the internet and reading=20 these articles everyday?, JUST LIKE YOU are now!! So, can=20 you afford $6.00 and see if it really works?? I think=20 so... People have said, "e;what if the plan is played out=20 and no one sends you the money? So what! What are the=20 chances of that happening when there are tons of new=20 honest users and new honest people who are joining the=20 internet and newsgroups everyday and are willing to give=20 it a try? Estimates are at 20,000 to 50,000 new users,=20 every day, with thousands of those joining the actual=20 internet. Remember: play FAIRLY and HONESTLY and this will=20 really work.=20 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= BE AN=20 INTERNET MILLIONAIRE LIKE OTHERS WITHIN A YEAR!!! Before=20 you say ''Bull'', please read the following. This is the=20 letter you have been hearing about on the news lately. Due=20 to the popularity of this letter on the Internet, a=20 national weekly news program recently devoted an entire=20 show to the investigation of this program described below,=20 to see if it really can make people money. The show also=20 investigated whether or not the program was legal. Their=20 findings proved once and for all that there=20 are ''absolutely NO Laws prohibiting the participation in=20 the program and if people can "follow the simple=20 instruction" they are bound to make some mega bucks with=20 only $6 out of pocket cost''. DUE TO THE RECENT INCREASE=20 OF POPULARITY & RESPECT THIS PROGRAM HAS ATTAINED, IT IS=20 CURRENTLY WORKING BETTER THAN EVER. This is what one had=20 to say: '' Thanks to this profitable opportunity". I was=20 approached many times before but each time I passed on it.=20 I am so glad I finally joined just to see what one could=20 expect in return for the minimal effort and money=20 required. To my astonishment, I received a total=20 $610,470.00 in 21 weeks, with money still coming in''. Pam=20 Hedland, Fort Lee, New Jersey.=20 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= Another=20 said: "this program has been around for a long time but I=20 never believed in it. But one day when I received this=20 again in the mail I decided to gamble my $6 on it. I=20 followed the simple instructions and walaa ..... 3 weeks=20 later the money started to come in. First month I only=20 made $240.00 but the next 2 months after that I made a=20 total of $290,000.00. So far, in the past 8 months by re- entering the program, I have made over $710,000.00 and I=20 am playing it again. =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=20 TESTIMONIALS=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D '' My name is Mitchell.=20 My wife, Jody and I live in Chicago. I am an accountant=20 with a major U.S. Corporation and I make pretty good=20 money. When I received this program I grumbled to Jody=20 about receiving ''junk mail''. I made fun of the whole=20 thing, spouting my knowledge of the population and=20 percentages involved. I ''knew'' it wouldn't work. Jody=20 totally ignored my supposed intelligence and few days=20 later she jumped in with both feet. I made merciless fun=20 of her, and was ready to lay the old ''I told you so'' on=20 her when the thing didn't work. Well, the laugh was on me!=20 Within 3 weeks she had received 50 responses. Within the=20 next 45 days she had received total $ 147,200.00 .........=20 all cash! I was shocked. I have joined Jodyin=20 her ''hobby ''. Mitchell Wolf M.D., Chicago, Illinois=20 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D '' = Not=20 being the gambling type, it took me several weeks to make=20 up my mind to participate in this plan. But conservative=20 as I am, I decided that the initial investment was so=20 little that there was just no way that I wouldn't get=20 enough orders to at least get my money back''. '' I was=20 surprised when I found my medium size post office box=20 crammed with orders. I made $319,210.00 in the first 12=20 weeks. The nice thing about this deal is that it does not=20 matter where people live. There simply isn't a better=20 investment with a faster return and so big''. Dan=20 Sondstrom, Alberta, Canada=20 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D = '' I had=20 received this program before. I deleted it, but later I=20 wondered if I should have given it a try. Of course, I had=20 no idea who to contact to get another copy, so I had to=20 wait until I was e-mailed again by someone else.........11=20 months passed then it luckily came again...... I did not=20 delete this one! I made more than $490,000 on my first try=20 and all the money came within 22 weeks''. Susan De Suza,=20 New York, N.Y.=20 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D = '' It=20 really is a great opportunity to make relatively easy=20 money with little cost to you. I followed the simple=20 instructions carefully and within 10 days the money=20 started to come in. My first month I made $ 20, 560.00 and=20 by the end of third month my total cash count was $=20 362,840.00. Life is beautiful, Thanx to internet''. Fred=20 Dellaca, Westport, New Zealand=20 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D = Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46849
  - 24
    - How to Send/Receive ethernet packets? Hi, Iam working with a NDIS VIRTUAL DEVICE DRIVER for wince 3.0, POCKETPC 2002. I got my device registered with NDIS and in turn NDIS calls my driverentry. My functions XXX_Init,XXX_QueryInformation,XXX_SetInformation,XXX_Send are called successfully. Now i want to send/receive the raw ethernet packets.how can i do it? Any help will be highly appreciated. Thank you. Robert. Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46847
  - 25
    - How do I rebuild code in the private\winceos\coreos dir? Hi All, I need to place some extra debug statements in the: E:\WINCE420\PRIVATE\WINCEOS\COREOS\NK\KITL\ETHDBG.C file so that I can see why my eth debug isn't working properly. If I set the "enable deptree build" flag, it will rebuild any core drivers and all platform code but it stil doesn't compile the files in this directory. Anyone know how? Cheers, Andrew Tag: Issue with IE 6.0 printing for CE 4.2 Tag: 46844

Hi,

In RDP session, printing works fine. But IE 6.0 prints
unexpected code. In other words, it can not print correct
characters. Please tell me something wrong. Thanks!!

Top