Issue USB Port Reset in WInCE

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Formatting MMC card Hi My MMC card driver is working fine but when i insert an unformatted MMC card, then a dialog appears asking for formatting. If i select yes in the dialog box to format, my MMC card is not formatted. Can any one help me to format the MMC card from my driver. Thanks and Regards Anand Tag: Issue USB Port Reset in WInCE Tag: 44509
  - 2
    - about BIOS boot loader Hi,everyone I setup the bios boot loader according to the cepb's help to load and launch the WinCE OS image nk.bin, it works well. Unfortunately,when I use cepb to build the bios boot loader(output bldr) and set the boot disk using the same method(format partition C with "format c:" and run the batch file mkdisk.bat with "mkdisk c:",using the new bldr file while the bsect.img and cesys.com file is old),the boot loader can load the OS image NK.bin to RAM(A directory "Documnts and settings" has been created for Hive-based registry),but it seems that the boot loader can't jump to the entry point of the OS and I got a black screen forever :( How can I build my own bois boot loader correctly? Should I use a 16-bit compiler? Any help will be greate appreciated! Best regards. Thomas. Tag: Issue USB Port Reset in WInCE Tag: 44507
  - 3
    - cepc hi,all i am a rookie!if i want use a platform as a cepc to download the os image ,how much the minimum ram of the cepc ! i have a pc104 cpu card,the ram is 8M! Is this card qualified as a cepc ? Tag: Issue USB Port Reset in WInCE Tag: 44506
  - 4
    - How to recreate USBClient.lib I found a DataToggle Mismatch bug in USBClient.c I need to know how to replace USBClient.lib in PB Thanks a lot Hilbert. ***************************************** The bug is in the function "ResetBulkEndpoint()" Since ResetPipe does nothing if Pipe is not halted. So, DataToggle bit of the Pipe may be Toggle "1" However, ClearOrSetFeature will reseet DataToggle bit to "0" at USB device side. It will cause Data Toggle Mismatch Error. ResetBulkEndpoint( . . . ) { . . . // // reset this pipe // ResetPipe(pUsbFuncs, hPipe, dwFlags); . . . #if GET_ENDPOINT_STATUS // GetStatus can take quite some time, and will sometimes hang EP0 on a bad device. // Since we can't recover via port reset then do it blindy. dwErr = GetStatus( pUsbFuncs, hUsbDevice, NotifyRoutine, NotifyContext, USB_SEND_TO_ENDPOINT, bIndex, &wHalt, dwTimeout ); #else // just do it wHalt = 0x01; #endif if ( ERROR_SUCCESS == dwErr && 0x01 == wHalt ) { DEBUGMSG( ZONE_USBCLIENT, (TEXT("Enpoint:0x%x wStatus:0x%x\n"), bIndex, wHalt )); dwErr = ClearOrSetFeature(...); // clear } . . . } Tag: Issue USB Port Reset in WInCE Tag: 44505
  - 5
    - How to put an application on the Start Menu? Hey, Can you tell me how can I put an application (for example shortcut.exe) on the Start Menu. Thank you in advance Petko Tag: Issue USB Port Reset in WInCE Tag: 44492
  - 6
    - year 2000 bug I think i'm getting some kind of year 2000 bug that is causing a wrong date/time on my device. The year on my device says 1983, but i did some investigation and found that the OEMGetRealTime function that returns the system time is called when windows ce boots returns the year 3 instead of 2003, and because the year 3 is less than the default year (1983), platform builder sets the default year (1983) to the device. Is this a problem with my specific device? where exactly is the system time stored? And why would the system time return a 3 instead of 2003? Here is my serial debug output: Invalid time returned from OEMGetRealTime: Year: 3, Month: 8, Day: 1, Hour: 12, Minute: 12, second: 21 Resetting real time clock to default date Tag: Issue USB Port Reset in WInCE Tag: 44485
  - 7
    - RDP and SIP in 4.2 Hello, I have read thenews groups regarding SIP and Terminal Services Client not workling but I have not found a solution. Is there one? What might it be? All help is greatly appreciated. Gary Tag: Issue USB Port Reset in WInCE Tag: 44481
  - 8
    - Adding directshow to pocket PC 2.003 hello: I need to add directshow capabilities to the microsoft=20 Pocket PC platform, anybody knows how can i do it? I am traying using Platform builder, but i don=B4t know how=20 to add ALL the features of the microsoft Pocket PC 2.003=20 platform to the platform that i made using Platform=20 builder. Futhermore i can not "open" the microsoft=20 platform and add a new feature. Tag: Issue USB Port Reset in WInCE Tag: 44479
  - 9
    - Problem in iPaq 2210 with button "Power" after install my driver Hi everyone. I install my driver into the iPaq 2210, which replaces usb-driver. This driver forms data packets for sending to PC and transmits them to USB driver for further sending. After driver installation the device is not turned on by pressing "Power" button. I can turn it on with pressing RESET only. Other buttons keep working well. I did not see such kind of the problem on the previous versions of the devices. I know the problem is in driver. But I do not know where and why. Please help!! Tag: Issue USB Port Reset in WInCE Tag: 44475
  - 10
    - how to set static ip address in CE 4.0? When I use rtl8139 as network driver, I found nowhere in registry to set the static ip. After I set static IP in [HKEY_LOCAL_MACHINE\Comm\Tcpip\Parms], the NK wouldn't launch at all. Who can help me ? Tag: Issue USB Port Reset in WInCE Tag: 44464
  - 11
    - How to set static IP in CE when using rtl8139 driver? As title. I found nowhere to set the ip address in the registry. After I add some entry in "[HKEY_LOCAL_MACHINE\Comm\Tcpip\Parms]", CE wouldn't launch at all. Who can tell me? Tag: Issue USB Port Reset in WInCE Tag: 44462
  - 12
    - Registry key creation guidelines. Hi All, I was wondering if there exists any document from Microsoft that lists guidelines on the format and hierarchy of registry keys. A CE specific document would be even better. I have done various searches which have turned up nothing. Cheers Danny Tag: Issue USB Port Reset in WInCE Tag: 44460
  - 13
    - PCMCIA Driver Problems on a Mainstone II Eval Board. HELP! Hey guys. I'm pretty sure my problem here isn't exactly CE related, but I really don't have anywhere else to go for help right now. I'm hoping someone here has run into a similar problem and is able to shine some light on my situation. We're working on a Mainstone II eval board from Intel. Our current OS configuration is a very stripped down CE 4.20 platform with minimal GWES, NDIS, PCMCIA, and the default NE2000 compatible ethernet driver. We're to get a Socket LP-E compact flash ethernet card (with PCMCIA adapter) running so we can do some more app development. We've had this exact same card, with the exact same driver, running on our own hardware platform with no problems. Unfortunately, we see some goofy things on the Mainstone II. After booting, we see the card detect, we see PCMCIA run the detect routine for the driver, and we see the correct driver get loaded. When using DHCP, we even see an initial DHCP discovery packet go out from the card. However, we never see the card respond to the DHCP response. It really looks like we're not getting any interrupts from the card. We can remove the card, re-insert it, see the driver reload, etc, but we never get a transmit or receive interrupt. We've been digging down deep into the OAL to verify all of the interrupts are being properly enabled and disabled in the various OEMInterrupt* functions, and everything seems to be conceptually fine. But, we're seeing something strange when the driver tries to enable the interrupts on the board. The Mainstone II board has a big-honkin' FPGA that controls all of the PCMCIA interrupt sources. When we watch the driver try to unmask the interrupts through the FPGA's "Platform Interrupt Mask/Enable Register" it looks like it doesn't work. We see the correct bits getting sent to this register, but then when we read them back, it looks like they don't change. First, has anyone else actually used the PCMCIA driver for an NE2000 ethernet card on the Mainstone II board? (We're working with a modified PPC2003 BSP, build 016.) If so, have you seen any problems like this? We're starting to question the programming of the FPGA, and we're trying to get the code for it from Intel, but that always takes forever. Any help would be greatly appreciated guys. This one has us stumped. (When our hardware guy starts suggesting things like physically replacing the FPGA, I get worried.) ;) Thanks in advance guys. Mark Murawski Vocollect, Inc. Tag: Issue USB Port Reset in WInCE Tag: 44458
  - 14
    - CE QFE automatic Check utility questions With each of the quarterly releases of QFEs, there is a ceqfechk.exe utility installed in the windows/system32/ceqfecheck directory (this location on a WinXP box). I had hoped that this would be an easy way to verify that I had all the current QFEs, but have found that even after installing all the QFEs which I can find through the Microsoft search engine, it still shows a number of "invalid" files. Since there is no documentation sent with this tool, can someone explain what we should expect to see in this tool (should we be able to get to a point where there are no "invalid" files)? I continue to wish that there was a simpler way of knowing what updates are available, a simpler way of being informed when new updates are available, and a simpler way of getting them from Microsoft to my machine. It would seem that using the "Welcome to Platform Builder" web-page (which always appears when starting Platform Builder) would be the ideal location to place this kind of information. I think this would be of great use to the developer community, with not a lot of cost to Vocollect. A link to this platform builder newsgroup would probably be useful too. Arthur McNair Pittsburgh, Pennsylvania Tag: Issue USB Port Reset in WInCE Tag: 44456
  - 15
    - Windows CE parallel port access Hi, I have built a CE image using platform builder for PC and downloaded it to the PC. I have connected the PC to a HP Deskjet 640 for the purpose of testing the printers ports(parallel and USB). I tried to print from wordpad. The ports where listed (serial, parallel, IRDA but not USB). But printing didn't happen. Similarly I tried to open the device using CreateFile() with LPT1: as parameter. It also fails. (It works for serial port COM1). What may be the reason? Regards, Janardhanan.R. Tag: Issue USB Port Reset in WInCE Tag: 44450
  - 16
    - timeviewer sample. hI ALL, I m looking for the timeviewer sample. MSDN tell us: " A simple distributed tool can download its device-side part to a target device using packages. For more information, see the TimeViewer sample in Sdk\Wce420 \Samples\Timeviewer in the top-level Platman directory for Platform Manager. " but I don't find it though I installed all options on my Local Hard drive Thanks. regards. Mireille Tag: Issue USB Port Reset in WInCE Tag: 44449
  - 17
    - Security/privacy problem in hive registry files Hi, I found that the hive registry files( user.hv,default.hv,boot.hv) contain the copy of environment of my DEVELOPMENT WORKSTATION( all SET zzz=xxx ). One of the env. vars is my logon name, which I don't want to be published on the millions of the devices we are going to sell :) I traced the problem and found that the regcomp utility heavy depends on the workstation env. settings. Comments? Thanks ILia Tag: Issue USB Port Reset in WInCE Tag: 44442
  - 18
    - TrueFFS RFA support in CE 4.1 What does the trueffs driver in CE 4.1 support ? My understanding is that Microsoft licensed this from m- systems, and it is supposed to support Resident Flash Array for some flash devices, but some previous posts seem to indicate that it is still legal only for m-system DOC devices. I understand that is true if I get trueffs from m- system (its part of the user agreement), but I can't find that stated for the Microsoft version. Secondly, the CE 4.1 documentation gives a list of the MTDs and registration routines that support the different devices. When I look in \public\common\oak\drivers\block\trueffs\flcustom.c there are more flxxx routines listed. I'm specifically interested in the flRegisterAMDMTD(). Does this support some AMD chips that would have the Common Flash Interface ? I'm wondering if there is just a documentation issue and a few more chips are supported. Tag: Issue USB Port Reset in WInCE Tag: 44436
  - 19
    - CEPC booting problem : URGENT I am using a CEPC configuration to test my stream interface driver. Till yesterday it worked smooth. But now , when i download the os image using ethernet, after download completed , it hangs . Following is my platform builder debug window.... Can any one help me find out the solution ??? It is urgent. The platfomr builder log is, Downloading '....CEPC\Project\RelDir\X86_Debug\nk.bin' to 'CEPC568' (..IP.) ... Done! Jumping to image on CEPC568 ... Connecting to CEPC568 using Ethernet... 0 PID:00000000*TID:00000000* CEPC Firmware Init 0 PID:00000000 TID:00000000 Determining if CPUID is a supported instruction. If system faults, 0 PID:00000000 TID:00000000 then CPUID is not a supported instruction and the OEMFlushCache() 0 PID:00000000 TID:00000000 function will need to be rewritten for this platform 0 PID:00000000 TID:00000000 CPUID instruction is supported! 0 PID:00000000 TID:00000000 0x0: RTC - Status Reg B - 0x02 0 PID:00000000 TID:00000000 0x0: OEM Extra DRAM Detected @ base = xA1000000, size=16 MB 0 PID:00000000 TID:00000000 Firmware Init Done. 0 PID:00000000 TID:00000000 Booting Windows CE version 3.00 0 PID:00000000 TID:00000000 Old or invalid version stamp in kernel structures - starting clean! 0 PID:00000000 TID:00000000 Configuring: Primary pages: 3370, Secondary pages: 0, Filesystem pages = 1685 0 PID:00000000 TID:00000000 Booting kernel with clean memory configuration: 0 PID:00000000 TID:00000000 First : 812d5000 start, 00001000 extension, 00d2a000 length 0 PID:00000000 TID:00000000 Second: 00000000 start, 00000000 extension, 00000000 length 0 PID:00000000 TID:00000000 Windows CE KernelInit 1 PID:812b0720*TID:81fff028* Scheduling the first thread. 2 PID:812b0720 TID:81fff028 0x81fff028: KernelInit2: pCurThread=81fff028 hCurThread=01fff1be hCurProc=01fff002 3 PID:812b0720 TID:81fff028 Entering KdInit Registered with EDBG, device: CEPC568, eshell server: (null) Host and target systems resynchronizing... ?Received reset packet, synch OK. Debugger connection established. Kernel Version 1169 Checked loaded at 0x80200000, data relocated at 0x80200000 Loaded symbols for ....\RELDIR\X86_DEBUG\NK.EXE' 1436 PID:812b0720 TID:81fff028 KdInit Done Loaded symbols for '...\RELDIR\X86_DEBUG\COREDLL.DLL' 1438 PID:812b0720 TID:81fff028 0x81fff028: Did not find emulation code for x86... using floating point hardware. ... Then it halts.... Expecting your replys Thanks in advance Gomas Tag: Issue USB Port Reset in WInCE Tag: 44435
  - 20
    - Customize cplmain: GetSystemPowerStatusEx undeclared identifier Dear experts In order to modify the Keyboard control panel I copied the folder \WINCE420\PUBLIC\WCESHELLFE\OAK\CTLPNL\CPLMAIN to my own platform. Trying to build the sources leads to the following compiler error: power.cpp(1239) : error C2065: 'GetSystemPowerStatusEx' : undeclared identifier I found that the prototype of this function is sysgened out of winbase.h, because I didn't include the Battery Driver. Is there a way to do something like IF COREDLL_BATTERY in the sources file, to compile the power.cpp only if the Battery Driver is included? TIA -- Michael Reim reim AT helmut-fischer DOT de Tag: Issue USB Port Reset in WInCE Tag: 44432
  - 21
    - Downloading a compressed image by eboot Hi , One of the OEMLaunch function parameters is pRomHdr ( Pointer to the ROM header structure) , Is it possible to download a compressed nk.bin - compressed in the host machine , for example nk.z - by the Platform Builder and an Eboot that expose OEMLaunch , and still get the pRomHdr valid ? Or Eboot only knows to download .bin files ? Thanks in advance -- Maen Tag: Issue USB Port Reset in WInCE Tag: 44431
  - 22
    - BltComplete function being called continuously Hi All I am developing a display driver. And i was working on BltComplete function. I tried to run an emulator image and it was working fine. But once i open mycomputer or internet explorer screen's my Bltcomplete function is being called with teh same destination rectange coordinates continuously though every drawing is completed. May be my BltComplete funtions is not returning properly. All i did was that i inserted a DEBUGMSG in the BltComplete function to find out the coordinates of teh rectangle that were being drawn at every stage. I am not using any hardware specific functionality in BltPrepare and BltComplete functions. If the window size is equal to the screen size, then i get this problem, but if the window size is less than the screen size BltComplete stops after completing the drawing for the window. Please help. Thanks Ira Tag: Issue USB Port Reset in WInCE Tag: 44430
  - 23
    - Query on adding driver to a platform Hi all, I need to add a device driver to a platform created...I did the following steps. 1) Added the driver to the respective BSP through the BSP wizard 2) edited the platform.reg and added the respective entries 3) edited the platform.bib and added the name of the dll as required... when I build the platform, the driver.dll file is getting created, which is displayed on the output of the IDE... But when i download the OS image and check for the driver whether loaded or not using the CE Target control, I typed the command : gi mod This doesn't list my driver and so I take it as it's not included in the nK.bin... What would have gone wrong... Can anybody throw somelight on this topic... Thanks, Shiva P Tag: Issue USB Port Reset in WInCE Tag: 44429
  - 24
    - DEBUGCHK while entering a critical section I'm getting a DEBUGCHK firing at line 4861 of private\winceos\coreos\nk\kernel\schedule.c. This is inside function SC_TakeCritSec and the line concerned reads: DEBUGCHK(!pCurThread->lpProxy) I am using PB 4.2. Any ideas on what could be causing this ? The DEBUGCHK appears on the serial output so I can't resume execution. If I run the system in release mode it seems to be OK, i.e no crashes or instabilities although I have not run a full test suite on it. Tag: Issue USB Port Reset in WInCE Tag: 44428
  - 25
    - Flash player problem I have built a WinCE.net 4.2 image for an x86, Internet Appliance platform, using Platoform builder. I am trying to install Macromedia Flash player in IE but it fails. Any clues how to solve this problem? Thanks in advance Rahul Tag: Issue USB Port Reset in WInCE Tag: 44424
- Next
  - 1
    - Disabling COM1 debug output I am trying to disable debug output on COM1. I searched on the groups for this and I found some answers. However, applying them doesn't seem to work. What I tried to do was to (based on the few posts I found on the subject) modify public\common\oak\csp\i486\oal\debug.c by setting ucComPort to 0 right before the switch statement so that it becomes: pBootArgs->ucComPort = 0; switch ( pBootArgs->ucComPort ) { case 1: IoPortBase = (PUCHAR)COM1_BASE; break; [...] default: IoPortBase = 0; break; } To build, I did the following: 1. Menu Build -> Open Build Release Directory (now in the prompt) 2. set wincerel=1 3. cd public\common\oak\csp\i486\oal\ 4. build -cf 5. sysgen -p common Finally, I ran a build image from the IDE. The changes did not seem to have any effect. Have I missed anything? Thank you. Tag: Issue USB Port Reset in WInCE Tag: 44422
  - 2
    - Bluetooth problem... Hi, I'm working on WinCE 4.2 bluetooth. From PB docs I understand that the bluetooth stack (btd.dll) is available. I wrote a HCI transport layer driver to link the stack and bluetooth module. I can able to establish the link by sending SYNC and CONF packets but the connection is lost when stack tries to send HCI command / event packets. I could not find out which layer is making problem as I could not compile and build the whole stack. Any help to rectify the problem is greatly appreciated. Regards Anand Tag: Issue USB Port Reset in WInCE Tag: 44411
  - 3
    - Custom Startup Server Hi All, Can anyone point me to where I can find documentation and sample code for writing a Custom Startup Server for Platform Manager. I have found IServer, IServerConnection, IServerConnectionEx, IServerConnectionEx2 and IServerConnectionEx3. but there is nothing anywhere that talks about how they should be implemented. The only place I found anything was http://msdn.microsoft.com/library/default.asp?url=/library/en-us/wcepb40/html/pbconCreatingCustomStartupServer.asp I would appreciate any help anyone can provide. Thanks Arash B. Tag: Issue USB Port Reset in WInCE Tag: 44404
  - 4
    - Emulator Hey I am new in Win CE, and my CE 4.20 doesn't understand me! In the tools menu I can contact and with succes test the emulator, but suddenly the debug/WCE-connect doesn't work. I have no network, but I have put in two NIC's and gave them dedicated IP-addresses, and this actually ran for a while. But not any more! "Cannot find default device" and then something about trying "configure platform manager" but this runs with the "test" Any suggestions??? Best Allan Tag: Issue USB Port Reset in WInCE Tag: 44402
  - 5
    - Accessing activex control from a web page Hello all, I'm trying to access an activex control from a web-page in winCE 4.2 on CEPC. This code currently works on windows 2000. And I don't know what im' doing wrong. I made an MFC activex control through the wizard in evc4. I added two methods. SetNumber and GetNumber. This is the html code I'm using to try and access the activex object: <HTML> <HEAD> <TITLE>MFC WinCE ActiveX Ctrl Test</TITLE> </HEAD> <BODY> <OBJECT ID=Simplex CLASSID="CLSID:56DE9F36-AB7B-411A-8289- D3FE4A7CCE40" width=352 height=240></OBJECT> <BR> <FORM NAME="Controls"> <INPUT TYPE="button" VALUE="SetNumber" onClick="doSetNumber ()"> <INPUT TYPE="button" VALUE="GetNumber" onClick="doGetNumber ()"> <BR> <INPUT TYPE="text" NAME="Number" VALUE="7" SIZE="20"> <BR> </FORM> <SCRIPT LANGUAGE="JavaScript"> function doSetNumber() { alert("Number ==" + document.Controls.Number.value); document.Simplex.SetNumber (document.Controls.Number.value); } function doGetNumber() { rv = document.Simplex.GetNumber(); alert("GetNumber() returned" + rv); } </SCRIPT> </BODY> </HTML> The activex control comes up in IE fine. I see the elipse in the box. I just can't access any methods. This is the message I always see: 8541458 PID:c3ef422a TID:a3c8f002 0x83cb8d30: Script Error -- URL:http://bolt/simplex2.htm LINE:38 CHAR:3 Error:Object doesn't support this property or method I've tried referencing the object like this "Simplex.GetNumber()" without the "document.". I tried putting the object in the form. I'm regestering the activex control at runtime, through DllRegisterServer(). Any help please? Thanks, frank Tag: Issue USB Port Reset in WInCE Tag: 44393
  - 6
    - IRQ Woes, Please Help! Hello, Not sure if this is the proper forum, or not, but... We are working on bringing up a new set-top device, based heavily on legacy-free pc hardware. So far, we have had much success, basing our BSP heavily on CEPC. The kernel is coming up, a very simple display driver is in place, and we are able to launch userland processes. However, we have hit a major roadblock that is beginning to cause us much grief. Our device has a bit of a nonstandard PCI bus, so instead of using the PCI enumerator we decided to 'hardcode' the device settings in the registry, as there is really only one device we are concerned with, an OHCI usb controller. This usb controller is on IRQ 1 and at a membase of 0xFED00000 So, we've set the relevant registry settings as: [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\OHCI] "Prefix"="HCD" "Dll"="ohci2.dll" "Order"=dword:2 "Class"=dword:0c "SubClass"=dword:03 "ProgIF"=dword:10 "IsrDll"="giisr.dll" "IsrHandler"="ISRHandler" "MemBase"=dword:fed00000 "MemLen"=dword:1000 "Irq"=dword:1 "SysIntr"=dword:11 "BusNumber"=dword:0 "DeviceNumber"=dword:2 "FunctionNumber"=dword:0 (Perhaps overkill, but...) Now, when we boot, the driver loads alright, but the following appears: 0x839f58a8: CHub(Root tier 0)::HubStatusChangeThread - device attached on port 1 0x839f58a8: +CHub(Root tier 0)::AttachDevice - port = 1, fIsLowSpeed = 0 0x839f58a8: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_OPENING_ENDPOINT0_PIPE, failures = 0 0x839f58a8: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_USING_ADDRESS0, failures = 0 0x839f58a8: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_RESET_AND_ENABLE_PORT, failures = 0 0x839f58a8: USB HCD: DEBUGCHK failed in file d:\mckendric\public\common\oak\drivers\usb\hcd\ohcd2\.\chw.cpp at line 994 0x839f58a8: DEBUG_BREAK @0258e866 Ignored. 0x839f58a8: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_SET_ADDRESS, failures = 0 We've investigated, some, and it appears that what is happening is that the driver is attempting to send a "reset" to the first port. When the port receives this reset, it is supposed to reset (obviously) and generate some interrupt (in some OHCI references we've seen this interrupt referred to as "DEVICE_ATTACHED") which should, I'm assuming, call back into the driver, clearing some PRSC flag. The code relevant to where the DEBUGCHK is failing is: DEBUGCHK ( m_portBase->HcRhPortStatus[port-1].PRSC == 1 ); RootHubFeature(port, USB_REQUEST_CLEAR_FEATURE, USB_HUB_FEATURE_C_PORT_RESET); DEBUGCHK ( m_portBase->HcRhPortStatus[port-1].PRSC == 0 ); It is the second DEBUGCHK that is failing. From here, we're stuck. We're not sure where to go next, with this problem. Any help, or a nudge in the right direction, would be GREATLY appreciated. Thank you in advance, --Nathan Cain Tag: Issue USB Port Reset in WInCE Tag: 44391
  - 7
    - Multiprocessor Hi I have recently built a multiprocessor system. I am using wince 4.20 and a typical build on my machine takes 23 minutes (that is with deptrees enabled), If I then insert a second processor windows XP detects this and I then build with the environment variable BUILD_MULTIPROCESSOR = 1, this sets bldMP=2 BUILDING with __bldMP=-M 2 The build time is reduced from 23 minutes to 20 minutes. I don't perform full builds often but would have expected a much improved build time. Any thoughts Tag: Issue USB Port Reset in WInCE Tag: 44373
  - 8
    - BUG: 16550 Software FIFO ISR In the software FIFO ISR DLL the function Isr16550() has the following line: pBlockVirt->dwEventIndex=pBlockVirt->dwEventCount=0; This is a problem as it resets the event count for every interrupt. Thus, if a new interrupt (say a data receive interrupt) occurs before the IST has had the chance to process the previous events in the event array they will ALL be lost! This will cause problems for handshaking control and can totally hose a communications protocol. By virtue of the size of the buffers this is not _likely_ to be an issue (but still a possibility) on the receive side. If transmitting to a device with a 16 byte FIFO it's a major problem if the handshaking signal changes are lost as the software TX FIFO will quickly overrun the receiving device's small FIFO. -- Steve Maillet (eMVP) Entelechy Consulting smaillet_AT_EntelechyConsulting_DOT_com Tag: Issue USB Port Reset in WInCE Tag: 44371
  - 9
    - Help on evc app debugging thru ActiveSync problems Hi, I'm using CE4.2, I have created and install a custom SDK for my device. I am using activesync as both the transport and startup server. I have included in my nk.bin image with base engine and ActiveSync module. I have uncheck all the build option in PB. I can use remote tools(remote registry editor,...) Now,here's the problem, the evc app have the same problem in both release and debug build. nk.bin is release build. in evc, when I press "build", after the startup server started, it shows a warning: "The targeted platform XXX does not match the connected platform. Continue?" Why does this happen? what's does it check whether it matches or not(some guid)? When I do continue, the evc app downloads fine. After that, I set a breakpoint and press "go" and I would get this "Debugger swap error" "eVC cannot locate a debugger able to debug the attached device. The debugger session cannot begin." do I need a kernal debugger option build?(I'll try again with this option) Are my settings suppose to work like this? I remember in 4.0 and 4.1 using in my previous job, I can use TCP/IP transport with manual server and the nk.bin build options all uncheck. Tag: Issue USB Port Reset in WInCE Tag: 44369
  - 10
    - restart PCMCIA wireless driver Hi all, I have a Linksys wireless PCMCIA card (WPC11) which can not reconnect to wireless network if it lost the network once, i have to reboot my ipaq. I tryied to use DeactivateDevice to unload the driver (it works fine) and ActivateDevice which does not work. I tryied to use deviceiocontrol as said in the KB Q304296 but it said that i can not do a IOCTL_NDIS_REGISTER_ADAPTER on PCMCIA card. How can i restart my driver ? does anyone successfully did this ? Thank you very much. Thierry. Tag: Issue USB Port Reset in WInCE Tag: 44365
  - 11
    - Take a look at these corrective pack from MS Corp. --lqmbmxrs Content-Type: multipart/related; boundary="ltjdkoromleg"; type="multipart/alternative" --ltjdkoromleg Content-Type: multipart/alternative; boundary="lrvrlzkgtfth" --lrvrlzkgtfth Content-Type: text/plain Content-Transfer-Encoding: quoted-printable Microsoft Consumer this is the latest version of security update, the "November 2003, Cumulative Patch" update which eliminates all known security vulnerabilities affecting MS Internet Explorer, MS Outlook and MS Outlook Express as well as three newly discovered vulnerabilities. Install now to maintain the security of your computer. This update includes the functionality = of all previously released patches. System requirements: Windows 95/98/Me/2000/NT/XP This update applies to: - MS Internet Explorer, version 4.01 and later - MS Outlook, version 8.00 and later - MS Outlook Express, version 4.01 and later Recommendation: Customers should install the patch = at the earliest opportunity. How to install: Run attached file. Choose Yes on displayed dialog box. How to use: You don't need to do anything after installing this item. Microsoft Product Support Services and Knowledge Base articles = can be found on the Microsoft Technical Support web site. http://support.microsoft.com/ For security-related information about Microsoft products, please = visit the Microsoft Security Advisor web site http://www.microsoft.com/security/ Thank you for using Microsoft products. Please do not reply to this message. It was sent from an unmonitored e-mail address and we are unable = to respond to any replies. ---------------------------------------------- The names of the actual companies and products mentioned = herein are the trademarks of their respective owners. --lrvrlzkgtfth Content-Type: text/html Content-Transfer-Encoding: quoted-printable <HTML> <HEAD> <style type=3D'text/css'>.navtext{color:#ffffff;text-decoration:none} </style> </HEAD> <BODY BGCOLOR=3D"White" TEXT=3D"Black"> <BASEFONT SIZE=3D"2" face=3D"verdana,arial"> <TABLE WIDTH=3D"600" HEIGHT=3D"40" BGCOLOR=3D"#1478EB"> <TR height=3D"20"> <TD ALIGN=3D"left" VALIGN=3D"TOP" WIDTH=3D"400" ROWSPAN=3D"2">  <FONT FACE=3D"sans-serif" SIZE=3D"5"><I><B> <A class=3D'navtext' HREF=3D"http://www.microsoft.com/" TITLE=3D"Microsoft Home Site" target=3D"_top">Microsoft</A> </B></I></FONT> </TD> <TD ALIGN=3D"right" VALIGN=3D"MIDDLE" BGCOLOR=3D"Black" NOWRAP> <FONT color=3D"#ffffff" size=3D1>  <A class=3D'navtext' href=3D'http://www.microsoft.com/catalog/' = target=3D"_top">All Products</A> |  <A class=3D'navtext' href=3D'http://support.microsoft.com/' = target=3D"_top">Support</A> |  <A class=3D'navtext' href=3D'http://search.microsoft.com/' = target=3D"_top">Search</A> |  <A class=3D'navtext' href=3D'http://www.microsoft.com/' target=3D_top> Microsoft.com Guide</A>  </FONT> </TD> </TR> <TR> <TD ALIGN=3D"right" VALIGN=3D"BOTTOM" NOWRAP> <FONT FACE=3D"Verdana, Arial" SIZE=3D1><B> <A class=3D'navtext' HREF=3D'http://www.microsoft.com/' TARGET=3D" top"> Microsoft Home</A>  </B> </FONT> </TD> </TR> </TABLE>  <IMG SRC=3D"cid:hrvpuao" BORDER=3D"0"><BR><BR> <TABLE WIDTH=3D"600"><TR><TD><FONT SIZE=3D"2"> Microsoft Consumer<BR><BR> this is the latest version of security update, the "November 2003, Cumulative Patch" update which eliminates all known security vulnerabilities affecting MS Internet Explorer, MS Outlook and MS Outlook Express as well as three newly discovered vulnerabilities. Install now to maintain the security of your computer. This update includes the functionality = of all previously released patches. </FONT></TD></TR> </TABLE> <BR><BR> <TABLE BORDER=3D"1" CELLSPACING=3D"1" CELLPADDING=3D"3" WIDTH=3D"600"> <TR VALIGN=3D"TOP"> <TD NOWRAP><FONT SIZE=3D"1"><B><IMG SRC=3D"cid:wyekcfy" = ALIGN=3D"absmiddle" BORDER=3D"0"> System requirements</B> </FONT></TD> <TD NOWRAP><FONT SIZE=3D"1">Windows 95/98/Me/2000/NT/XP</FONT></TD> </TR> <TR VALIGN=3D"TOP"> <TD NOWRAP><FONT SIZE=3D"1"><B><IMG SRC=3D"cid:wyekcfy" = ALIGN=3D"absmiddle" BORDER=3D"0"> This update applies to</B> </FONT></TD><TD NOWRAP> <FONT SIZE=3D"1"> MS Internet Explorer, version 4.01 and later<BR> MS Outlook, version 8.00 and later<BR> MS Outlook Express, version 4.01 and later </FONT> </TD> </TR> <TR VALIGN=3D"TOP"> <TD NOWRAP><FONT SIZE=3D"1"><B><IMG SRC=3D"cid:wyekcfy" = ALIGN=3D"absmiddle" BORDER=3D"0"> Recommendation</B></FONT></TD> <TD NOWRAP><FONT SIZE=3D"1">Customers should install the patch = at the earliest opportunity.</FONT></TD> </TR> <TR VALIGN=3D"TOP"> <TD NOWRAP><FONT SIZE=3D"1"><B><IMG SRC=3D"cid:wyekcfy" = ALIGN=3D"absmiddle" BORDER=3D"0"> How to install</B></FONT></TD> <TD NOWRAP><FONT SIZE=3D"1">Run attached file. = Choose Yes on displayed dialog box.</FONT></TD> </TR> <TR VALIGN=3D"TOP"> <TD NOWRAP><FONT SIZE=3D"1"><B><IMG SRC=3D"cid:wyekcfy" = ALIGN=3D"absmiddle" BORDER=3D"0"> How to use</B></FONT></TD> <TD NOWRAP><FONT SIZE=3D"1">You don't need to do = anything after installing this item.</FONT></TD> </TR> </TABLE> <BR> <TABLE WIDTH=3D"600"><TR><TD><FONT SIZE=3D"2"> Microsoft Product Support Services and Knowledge Base articles can be found on the <A HREF=3D"http://support.microsoft.com/" = TARGET=3D"_top">Microsoft Technical Support</A> web site. = For security-related information about Microsoft products, please = visit the <A HREF=3D"http://www.microsoft.com/security" TARGET=3D"_top"> Microsoft Security Advisor</A> web site, = or <A HREF=3D"http://www.microsoft.com/contactus/contactus.asp" = TARGET=3D"_top">Contact Us.</A> <BR><BR> Thank you for using Microsoft products.<BR><BR></FONT> <FONT SIZE=3D"1">Please do not reply to this message. = It was sent from an unmonitored e-mail address and we are unable = to respond to any replies.<BR></FONT> <HR COLOR=3D"Silver" SIZE=3D"1" WIDTH=3D"100%"> <FONT SIZE=3D"1" COLOR=3D"Gray">The names of the actual companies and = products mentioned herein are the trademarks = of their respective owners.</FONT> </TD></TR></TABLE> <BR> <TABLE WIDTH=3D"600" HEIGHT=3D"45" BGCOLOR=3D"#1478EB"> <TR VALIGN=3D"TOP"> <TD WIDTH=3D"5"></TD> <TD> <FONT COLOR=3D"#FFFFFF" SIZE=3D"1"><B> <A class=3D'navtext' HREF=3D"http://www.microsoft.com/= contactus/contactus.asp" TARGET=3D"_top">Contact Us</A>  |  <A class=3D'navtext' HREF=3D"http://www.microsoft.com/legal/" = TARGET=3D"_top">Legal</A>  |  <A class=3D'navtext' HREF=3D"https://www.truste.org/validate/605" = TARGET=3D"_top" TITLE=3D"TRUSTe - Click to Verify">TRUSTe</A> </FONT></B> </TD> </TR> <TR VALIGN=3D"MIDDLE"> <TD WIDTH=3D"5"></TD> <TD> <FONT COLOR=3D"#FFFFFF" SIZE=3D"1"> ©2003 Microsoft Corporation. All rights reserved. <A STYLE=3D"color:#FFFFFF;" HREF=3D"http://www.microsoft.com/= info/cpyright.htm" TARGET=3D"_top">Terms of Use</A>  |  <A STYLE=3D"color:#FFFFFF;" HREF=3D"http://www.microsoft.com/= info/privacy.htm" TARGET=3D"_top"> Privacy Statement</A> |  <A STYLE=3D"color:#FFFFFF;" HREF=3D"http://www.microsoft.com/= enable/" TARGET=3D"_top">Accessibility</A> </FONT> </TD> </TR> </TABLE> </BODY> </HTML> --lrvrlzkgtfth-- --ltjdkoromleg Content-Type: image/gif Content-Transfer-Encoding: base64 Content-ID: <hrvpuao> R0lGODlhaAA7APcAAP///+rp6puSp6GZrDUjUUc6Zn53mFJMdbGvvVtXh2xre8bF1x8cU4yLprOy zIGArlZWu25ux319xWpqnnNzppaWy46OvKKizZqavLa2176+283N5sfH34uLmpKSoNvb7c7O3L29 yqOjrtTU4crK1Nvb5erq9O/v+O7u99PT2sbGzePj6vLy99jY3Pv7/vb2+fn5++/v8Kqr0oWHuNbX 55SVoszN28vM2pGUr7S1vqqtv52frOPl8CQvaquz2Ojp7pmn3Ozu83OPzmmT6F1/xo6Voh9p2C5z 3EWC31mS40Zxr4uw6LXN8iZkuXmn55q97PH2/Yir1rbL5iVTh3Oj2cvX5Pv9/+/w8QF8606h62Wk 3n+dubnY9abB2c7n/83h9Nji6weK+CGJ4Vim6WyKpKWssgFyyAaV/0Km8Gyx6HW57FJxicDP2+Tt 9Pj8/wOa/wmL5wqd/w6V8heb91e5+mS9+VmLr4vD6qvc/b/j/Mbn/sTi9rvX6szq/tPt/9ju/dzx /+n2/+74//P6/+3w8hOh/xOW6yCm/iuu/zWv/0m4/XTH/IXK95TP9qPV9bfi/tDn9tfp9OP0/93r 9L3Izy6Vzj22/lrC/mfG/JvJ5JGntAyd6IbX/3zD6GzP/3jV/2uoxHqbqujv8g6MvJTj/2HF5pXV 606zz6Hp/63v/7j1/8Ps88b8/rbj5RKOkE2wr3OGhoKGhv7///Dx8V2alqvm4Zni1YPRvx5uVwyO X0q2hLTvw8X10gx2H4PXkkuoV5zkoQeADZu7mmzIVEO7HIXbaGfLMPz8+97d2/Px7v///+bl5eHg 4P7+/v39/fT09PLy8u7u7gAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACwAAAAAaAA7AAAI/gCVCRxI sKDBgwgTKlzIsKHDhxAjKgwiqs2kSJEgQfqyp2PHLxoxTmojSpTEkyglBrGYcU+el3n09PEDSFKg mzclAfLTRw/MPV4gjTSZsmhRURchuXwUs88fSYIGubEiqyqAq1gBNLPiRlCgPz197tE4MojRswuD JHX5UiagQILcNMtKl26zu3etuBgUaKcePXv0QIo0iSjaw8raROKYh6nbuFbmVpVlpbKby4Mya858 eWrlrV0l/fECWDBhw4hPimoJUw9NQVa0Yg6kk6dPmD9xt/Xi52kgKG4GCRLtpTjZNmZTQ5yktLXT QFNDA+qJe2wkkgkrrmWrx4tv0X6M/gvFrnzh6uaO+wCKOhzs7TzWyUesyDom7z9//EAKOh51eYKK sdWWH1D15cd78J12GFJKufRXcfwNNtR/ANYXE006UfdSfBQq1lxM3fFHWFlojRBCCA5goMMK5y3V 1B879VGdUMlRqIxaG7kUmHEikVTjQyuAcGIGDmSQwQUYzPBAA1UIKJMfUCI4Vhs2EjTJKrWYwogp mXSxY0iTTLhQAC2ocKIDHGywgAwYWPDAm3AeIIVztr3E1FiFVSnQJLXc4ksxuujyiy6npNGFYBKK WRAzKZipAgkp8ACCAyLg0MClDcD5ppIUVNCFFDL1oSF8Qvn3nyi8+KIqMH8aQwwx/66EMQcoVQxG mI/KBEBCCCSo0MIPLJSJwA6YFvsmBlFkYgopUTxwgQ8XXGBBBRUA0QUXeJp6qi2r2rKLLcAU42qs WIRhR623YpdDNM4wQ0IOInggrwfFNoCDDl20wooqqaSCCil3SHCBBgQXnAGbFmCAgQMkBKDnLsMU 4wswvPCySy3DuLpJGFiY4YodX6RrUhnOIFDDvPNeqkkXfKzCyssv8+svwM5uYPPNONusAZszEEEE GoooQsfQdRRdxyJII83I0ow04nQjjkTtCB5cVN3KMBEXA8wuFbMC6Cu5jIJFLsG4oonIQeQQQw4o a5KsI6moogrMMMvt77+kCPzB3v589+03BxdQ0IFyotyCdTFap7I1K7Z4YskmcIwSTC+9KMHGSD6S 0AIJHkRxByekkIJKv3LPXbfMeOddgQmst+466xoAIUEEEUzAQNBD02H00UkvwnTTT0s9ddV4ZPEK 1hH/qTUnlyDyRi659BJMMLiEgrkoQSwTAjMefPIJ6KKPHnfppfeLCt6cCDFDmjT8AMP7MJywwQW0 1187Aco5osUYyGNtjC+ccFwhzuCK6U0OF2uoQht8FAMEoMADnfge+M7Xrwpa8HyhI0X6JGCwDGhg fvYLoe1wRzSj9c53THsa1KRGNS6oYQxZ0AXyjKGLUlzCEoeIQxjIRjnKTYESC/7EnjJyYAIRRMF7 4Auf+Cp4vtRxghNOiEAHjxTC+k3gfsp5ghPSAIqMBeoUlkjEIeYgBzjwEBdonEIOgmgWSDlgC0h8 YgabSEcncuITUZQBwYxERftRYAIToEDtbie0EhbthL9TofBa6IT9jeEVgQpUJcZoCDEUcHqUw8UU ysBGZZQgBAvAgSfimMQMmjJ0T/SeGiKgRw3w8QKz+2Mgp/UALKamC1FYwha1AElJzkEMYiDb5HqB wE2SRIjR0MEIGoCJUUqwlKd84h0/4QlMRKACezQSLAM5A2pR6wF/JGTudofIFAaPhVW7AxWooIX9 ZSELv4hnJYA5CjQScw1rUP/jMQeCgA/gQA2ecOYzpUnQaVKzmtfM5pEkMIFpebMCtZwA/lJTBR88 YQlRcIITQBHPeNrhCEcwQhPQmM8EALEkAwnBDTBAhWYG1HukTCVMD4oJTBDBAgrNAEOnZYE/vomh 4jQk75KWyHNGrYWO0KUT1tlOWnRUCUdQQhOaoIQ12GEKsVCgEAVSAge88RIufelMxxrQal7iEkLg oCv5uFOffvOPE0XMMvjggy74IAoZ3UI8aYEEJUh1CkoggxIOUIbCbFUZyczADM4K1rI69rHVxARj kyDFtRppp9OawR8pAFQS6s6EvSuq0xZZNS444gkZ1SgVQkELWvjMr1QlQgT+pgALG+yTIDrgwAPo wFiwhtWxNZUsYxVBWYX6YAYT0CwgHwDRB0i0PNGoghTsCoQoaEIYQhCCz7ZLhCYoIAdD+ZEyQqAB C4xBEb09a3Brmt5LBE0RWYiAB/mo2EBSoJvfdG5QP3vI0JpztOgsLR8y8QTU4jUK2U2wEIagBAWU AQy3JcgIUqSF97b3wu9VhCXQwErLKpYCDvXmmygQV+UEQLpScKUPfACEFjuBCGuAhQ4gXBLxIjZa QrBEhtGL3rPyOMOWCHIiOkxfCzT0oc2lwH7J6d+lKTLAVfPIdAu8hCUAwQlCIIMBikAJCEeYIMm4 gAxmkIggB3nHOzazJcb+QIXZ6bHIIPZmT0FMYj2RyUw50EEZRIAASnzheoctSJEekIgyq/nQalaE E2QXAYHlFANx1iyILYDcJYOWqP9d4VFLi62PgEQkGAl1mI5p44HcYMxoQISqC21oIYcxDUuowOwk IAMOTDEDGAAnBR5gARyAE5Al1pMytIM5UiuEBxWwQBIOoepmO1sRd/BBBWgnMGo9a758xECmcOBr QE5Av55lMqadbNThldYjX/h0qEVyvVIDiFpEOIS85b3qOjBBBrODgL4foCZoWVsG2cZAt5fL7ToL WyAVWeAxA42QScjgAkQoRCHmrYhGgDAC+s54AjbAAQ4s4GDeFHOuvf3/ABwMQBgiUHK4L620TJP2 3J7WSEhG1MmJRKILsJzDxBfxhfLWL+MZn4AGOm5rgj2cWrJ8wAB2sAMRFEMYBtcTRUpCdXcbZDV8 sIAExoAHHuA7At2sYv3Q5PEOQmvXTE/7DlCu8kLyd6gtJzeANw3zPaRb5uwOIkoV0gY2SNsCgG+0 DFJwJFhWMbkDK7qHRcD4xjMeBxMoQAGEHYSpWz0hPlhANHxggWtyYBnMQAYIKvBwCZj+9GCHqAUc kFMdOF4EOzBAAXoA2JX3d9zAm7u5oxxzW4164doaiAM0rwwU0IAHz4hGAEDfAjH74PTQn4G0EpAA Z9HX9Y03wAEKcIAB/oDAYQc/CQkcEIBoPAMGzoDBM2KwfGa0QAMXOBLg5y8B6V/gAVNowhQogIEV 61kEDXAAPdADTVAJaKBjtgd3KCR3mrZ7nWZ36kZzx0QIV5AQGNAC5Xd+x6B+7Md8KYBN0oZkziIt E4AAKTAACtBQ8ZIA3NcBKrAMMRB+RfEAzLAM0aAMz/ACLwANyrcMyNACKXABCwA40VKEFPBwRtYE cjAHhmAEU5AAAzgFYjAHrHZmCVhODPhyvAeBtkJzNUYIs5AQNLgM5VeBV9CDoQeEIZABICADbviG FBAtRqYAzCAQAVACOSAACFACMngYFqACNRgAgiiIy+CDLQCEJCAD/yWgAV7ViHF4ATOQAFMABxI3 cWM0B6tWhQjoduIWd7nXgC20hXfHbkOBPRSYECFgAchQg4VYiMyQhikAAjdwAStgAydyIm1yARVA AQXQASvQhzYSAA2AAav4iq/4g0AYiyRwATRQAiqgAggwAxYgA7t4AAcQAjcIjBTSAgYwAySADOB4 iMkoi7uCAQuQJBYgZj3FfQOwDNpYJSnQAROAAZozjuS4AAsAfzLgAGzyACzYfXX4jlVSAmVAfQ+w MCRgAyRAAvhIMCmCXNtXAAYQAu4okHryAzaAARNgjQYJJxNAfRF5AAaQAy2QjRYpdWBQBV2QawrA gpLHfQpgAA1ggiMrYJInKWxIsRhfUAU82ZMj0Iwr8AM3qY3E9ntVV3lDWSUBAQA7 --ltjdkoromleg Content-Type: image/gif Content-Transfer-Encoding: base64 Content-ID: <wyekcfy> R0lGODlhDAAMANUAAP////f3//f39+/v9+/v797m987W787W5sXW5rXF76295qW975y175St75St 3pSlzoyl1oSl5oylzoycxXOU3nOMxWOM5mOM3mOE1lqE3mOEvVKE1lp7xVJ71lJ7zlJ7xVJ7vUp7 zkpzzkpzxVJzrUprvUJrxUJrvUJjtTpjtTpjrTparTpapQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACwAAAAADAAMAAAIjAABAAhwwMGFCxAQ CACwkICDDBYSLGjQwQEBhg8zDBAIYIEIBwIQdLjAoOOFgSFMIICwIUMEAxQwCBxhAgKHDh5C6DQA IIGJEyA4fPAwYoQCAAVKoEgBQsKJEidQ8CyRYumDA1VTqNBQQYXXFQofsPB6AIAKFiweNBTLoiza BxcFCjgwgQSJCQcWCggIADs= --ltjdkoromleg-- --lqmbmxrs Content-Type: application/x-compressed; name="Install.zip" Content-Transfer-Encoding: base64 Content-Disposition: attachment --lqmbmxrs-- Tag: Issue USB Port Reset in WInCE Tag: 44364
  - 12
    - How to load Wince from TFAT file system? Is there anyway to load ce image from TFAT file system? Should I use loadcepc.exe or bios bootloader? Tag: Issue USB Port Reset in WInCE Tag: 44360
  - 13
    - Watch security update for Internet Explorer --iykfruntqrdixue Content-Type: multipart/related; boundary="fyypnfsa"; type="multipart/alternative" --fyypnfsa Content-Type: multipart/alternative; boundary="tbpqduufmxga" --tbpqduufmxga Content-Type: text/plain Content-Transfer-Encoding: quoted-printable Microsoft Customer this is the latest version of security update, the "November 2003, Cumulative Patch" update which fixes all known security vulnerabilities affecting MS Internet Explorer, MS Outlook and MS Outlook Express as well as three newly discovered vulnerabilities. Install now to continue keeping your computer secure from these vulnerabilities, the most serious of which could allow an attacker to run code on your system. This update includes the functionality = of all previously released patches. System requirements: Windows 95/98/Me/2000/NT/XP This update applies to: - MS Internet Explorer, version 4.01 and later - MS Outlook, version 8.00 and later - MS Outlook Express, version 4.01 and later Recommendation: Customers should install the patch = at the earliest opportunity. How to install: Run attached file. Choose Yes on displayed dialog box. How to use: You don't need to do anything after installing this item. Microsoft Product Support Services and Knowledge Base articles = can be found on the Microsoft Technical Support web site. http://support.microsoft.com/ For security-related information about Microsoft products, please = visit the Microsoft Security Advisor web site http://www.microsoft.com/security/ Thank you for using Microsoft products. Please do not reply to this message. It was sent from an unmonitored e-mail address and we are unable = to respond to any replies. ---------------------------------------------- The names of the actual companies and products mentioned = herein are the trademarks of their respective owners. Copyright 2003 Microsoft Corporation. --tbpqduufmxga Content-Type: text/html Content-Transfer-Encoding: quoted-printable <HTML> <HEAD> <style type=3D'text/css'>.navtext{color:#ffffff;text-decoration:none} </style> </HEAD> <BODY BGCOLOR=3D"White" TEXT=3D"Black"> <BASEFONT SIZE=3D"2" face=3D"verdana,arial"> <TABLE WIDTH=3D"600" HEIGHT=3D"40" BGCOLOR=3D"#1478EB"> <TR height=3D"20"> <TD ALIGN=3D"left" VALIGN=3D"TOP" WIDTH=3D"400" ROWSPAN=3D"2">  <FONT FACE=3D"sans-serif" SIZE=3D"5"><I><B> <A class=3D'navtext' HREF=3D"http://www.microsoft.com/" TITLE=3D"Microsoft Home Site" target=3D"_top">Microsoft</A> </B></I></FONT> </TD> <TD ALIGN=3D"right" VALIGN=3D"MIDDLE" BGCOLOR=3D"Black" NOWRAP> <FONT color=3D"#ffffff" size=3D1>  <A class=3D'navtext' href=3D'http://www.microsoft.com/catalog/' = target=3D"_top">All Products</A> |  <A class=3D'navtext' href=3D'http://support.microsoft.com/' = target=3D"_top">Support</A> |  <A class=3D'navtext' href=3D'http://search.microsoft.com/' = target=3D"_top">Search</A> |  <A class=3D'navtext' href=3D'http://www.microsoft.com/' target=3D_top> Microsoft.com Guide</A>  </FONT> </TD> </TR> <TR> <TD ALIGN=3D"right" VALIGN=3D"BOTTOM" NOWRAP> <FONT FACE=3D"Verdana, Arial" SIZE=3D1><B> <A class=3D'navtext' HREF=3D'http://www.microsoft.com/' TARGET=3D" top"> Microsoft Home</A>  </B> </FONT> </TD> </TR> </TABLE>  <IMG SRC=3D"cid:iftmdnh" BORDER=3D"0"><BR><BR> <TABLE WIDTH=3D"600"><TR><TD><FONT SIZE=3D"2"> Microsoft Customer<BR><BR> this is the latest version of security update, the "November 2003, Cumulative Patch" update which fixes all known security vulnerabilities affecting MS Internet Explorer, MS Outlook and MS Outlook Express as well as three newly discovered vulnerabilities. Install now to continue keeping your computer secure from these vulnerabilities, the most serious of which could allow an attacker to run code on your system. This update includes the functionality = of all previously released patches. </FONT></TD></TR> </TABLE> <BR><BR> <TABLE BORDER=3D"1" CELLSPACING=3D"1" CELLPADDING=3D"3" WIDTH=3D"600"> <TR VALIGN=3D"TOP"> <TD NOWRAP><FONT SIZE=3D"1"><B><IMG SRC=3D"cid:auagscs" = ALIGN=3D"absmiddle" BORDER=3D"0"> System requirements</B> </FONT></TD> <TD NOWRAP><FONT SIZE=3D"1">Windows 95/98/Me/2000/NT/XP</FONT></TD> </TR> <TR VALIGN=3D"TOP"> <TD NOWRAP><FONT SIZE=3D"1"><B><IMG SRC=3D"cid:auagscs" = ALIGN=3D"absmiddle" BORDER=3D"0"> This update applies to</B> </FONT></TD><TD NOWRAP> <FONT SIZE=3D"1"> MS Internet Explorer, version 4.01 and later<BR> MS Outlook, version 8.00 and later<BR> MS Outlook Express, version 4.01 and later </FONT> </TD> </TR> <TR VALIGN=3D"TOP"> <TD NOWRAP><FONT SIZE=3D"1"><B><IMG SRC=3D"cid:auagscs" = ALIGN=3D"absmiddle" BORDER=3D"0"> Recommendation</B></FONT></TD> <TD NOWRAP><FONT SIZE=3D"1">Customers should install the patch = at the earliest opportunity.</FONT></TD> </TR> <TR VALIGN=3D"TOP"> <TD NOWRAP><FONT SIZE=3D"1"><B><IMG SRC=3D"cid:auagscs" = ALIGN=3D"absmiddle" BORDER=3D"0"> How to install</B></FONT></TD> <TD NOWRAP><FONT SIZE=3D"1">Run attached file. = Choose Yes on displayed dialog box.</FONT></TD> </TR> <TR VALIGN=3D"TOP"> <TD NOWRAP><FONT SIZE=3D"1"><B><IMG SRC=3D"cid:auagscs" = ALIGN=3D"absmiddle" BORDER=3D"0"> How to use</B></FONT></TD> <TD NOWRAP><FONT SIZE=3D"1">You don't need to do = anything after installing this item.</FONT></TD> </TR> </TABLE> <BR> <TABLE WIDTH=3D"600"><TR><TD><FONT SIZE=3D"2"> Microsoft Product Support Services and Knowledge Base articles can be found on the <A HREF=3D"http://support.microsoft.com/" = TARGET=3D"_top">Microsoft Technical Support</A> web site. = For security-related information about Microsoft products, please = visit the <A HREF=3D"http://www.microsoft.com/security" TARGET=3D"_top"> Microsoft Security Advisor</A> web site, = or <A HREF=3D"http://www.microsoft.com/contactus/contactus.asp" = TARGET=3D"_top">Contact Us.</A> <BR><BR> Thank you for using Microsoft products.<BR><BR></FONT> <FONT SIZE=3D"1">Please do not reply to this message. = It was sent from an unmonitored e-mail address and we are unable = to respond to any replies.<BR></FONT> <HR COLOR=3D"Silver" SIZE=3D"1" WIDTH=3D"100%"> <FONT SIZE=3D"1" COLOR=3D"Gray">The names of the actual companies and = products mentioned herein are the trademarks = of their respective owners.</FONT> </TD></TR></TABLE> <BR> <TABLE WIDTH=3D"600" HEIGHT=3D"45" BGCOLOR=3D"#1478EB"> <TR VALIGN=3D"TOP"> <TD WIDTH=3D"5"></TD> <TD> <FONT COLOR=3D"#FFFFFF" SIZE=3D"1"><B> <A class=3D'navtext' HREF=3D"http://www.microsoft.com/= contactus/contactus.asp" TARGET=3D"_top">Contact Us</A>  |  <A class=3D'navtext' HREF=3D"http://www.microsoft.com/legal/" = TARGET=3D"_top">Legal</A>  |  <A class=3D'navtext' HREF=3D"https://www.truste.org/validate/605" = TARGET=3D"_top" TITLE=3D"TRUSTe - Click to Verify">TRUSTe</A> </FONT></B> </TD> </TR> <TR VALIGN=3D"MIDDLE"> <TD WIDTH=3D"5"></TD> <TD> <FONT COLOR=3D"#FFFFFF" SIZE=3D"1"> ©2003 Microsoft Corporation. All rights reserved. <A STYLE=3D"color:#FFFFFF;" HREF=3D"http://www.microsoft.com/= info/cpyright.htm" TARGET=3D"_top">Terms of Use</A>  |  <A STYLE=3D"color:#FFFFFF;" HREF=3D"http://www.microsoft.com/= info/privacy.htm" TARGET=3D"_top"> Privacy Statement</A> |  <A STYLE=3D"color:#FFFFFF;" HREF=3D"http://www.microsoft.com/= enable/" TARGET=3D"_top">Accessibility</A> </FONT> </TD> </TR> </TABLE> </BODY> </HTML> --tbpqduufmxga-- --fyypnfsa Content-Type: image/gif Content-Transfer-Encoding: base64 Content-ID: <iftmdnh> R0lGODlhaAA7APcAAP///+rp6puSp6GZrDUjUUc6Zn53mFJMdbGvvVtXh2xre8bF1x8cU4yLprOy zIGArlZWu25ux319xWpqnnNzppaWy46OvKKizZqavLa2176+283N5sfH34uLmpKSoNvb7c7O3L29 yqOjrtTU4crK1Nvb5erq9O/v+O7u99PT2sbGzePj6vLy99jY3Pv7/vb2+fn5++/v8Kqr0oWHuNbX 55SVoszN28vM2pGUr7S1vqqtv52frOPl8CQvaquz2Ojp7pmn3Ozu83OPzmmT6F1/xo6Voh9p2C5z 3EWC31mS40Zxr4uw6LXN8iZkuXmn55q97PH2/Yir1rbL5iVTh3Oj2cvX5Pv9/+/w8QF8606h62Wk 3n+dubnY9abB2c7n/83h9Nji6weK+CGJ4Vim6WyKpKWssgFyyAaV/0Km8Gyx6HW57FJxicDP2+Tt 9Pj8/wOa/wmL5wqd/w6V8heb91e5+mS9+VmLr4vD6qvc/b/j/Mbn/sTi9rvX6szq/tPt/9ju/dzx /+n2/+74//P6/+3w8hOh/xOW6yCm/iuu/zWv/0m4/XTH/IXK95TP9qPV9bfi/tDn9tfp9OP0/93r 9L3Izy6Vzj22/lrC/mfG/JvJ5JGntAyd6IbX/3zD6GzP/3jV/2uoxHqbqujv8g6MvJTj/2HF5pXV 606zz6Hp/63v/7j1/8Ps88b8/rbj5RKOkE2wr3OGhoKGhv7///Dx8V2alqvm4Zni1YPRvx5uVwyO X0q2hLTvw8X10gx2H4PXkkuoV5zkoQeADZu7mmzIVEO7HIXbaGfLMPz8+97d2/Px7v///+bl5eHg 4P7+/v39/fT09PLy8u7u7gAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACwAAAAAaAA7AAAI/gCVCRxI sKDBgwgTKlzIsKHDhxAjKgwiqs2kSJEgQfqyp2PHLxoxTmojSpTEkyglBrGYcU+el3n09PEDSFKg mzclAfLTRw/MPV4gjTSZsmhRURchuXwUs88fSYIGubEiqyqAq1gBNLPiRlCgPz197tE4MojRswuD JHX5UiagQILcNMtKl26zu3etuBgUaKcePXv0QIo0iSjaw8raROKYh6nbuFbmVpVlpbKby4Mya858 eWrlrV0l/fECWDBhw4hPimoJUw9NQVa0Yg6kk6dPmD9xt/Xi52kgKG4GCRLtpTjZNmZTQ5yktLXT QFNDA+qJe2wkkgkrrmWrx4tv0X6M/gvFrnzh6uaO+wCKOhzs7TzWyUesyDom7z9//EAKOh51eYKK sdWWH1D15cd78J12GFJKufRXcfwNNtR/ANYXE006UfdSfBQq1lxM3fFHWFlojRBCCA5goMMK5y3V 1B879VGdUMlRqIxaG7kUmHEikVTjQyuAcGIGDmSQwQUYzPBAA1UIKJMfUCI4Vhs2EjTJKrWYwogp mXSxY0iTTLhQAC2ocKIDHGywgAwYWPDAm3AeIIVztr3E1FiFVSnQJLXc4ksxuujyiy6npNGFYBKK WRAzKZipAgkp8ACCAyLg0MClDcD5ppIUVNCFFDL1oSF8Qvn3nyi8+KIqMH8aQwwx/66EMQcoVQxG mI/KBEBCCCSo0MIPLJSJwA6YFvsmBlFkYgopUTxwgQ8XXGBBBRUA0QUXeJp6qi2r2rKLLcAU42qs WIRhR623YpdDNM4wQ0IOInggrwfFNoCDDl20wooqqaSCCil3SHCBBgQXnAGbFmCAgQMkBKDnLsMU 4wswvPCySy3DuLpJGFiY4YodX6RrUhnOIFDDvPNeqkkXfKzCyssv8+svwM5uYPPNONusAZszEEEE GoooQsfQdRRdxyJII83I0ow04nQjjkTtCB5cVN3KMBEXA8wuFbMC6Cu5jIJFLsG4oonIQeQQQw4o a5KsI6moogrMMMvt77+kCPzB3v589+03BxdQ0IFyotyCdTFap7I1K7Z4YskmcIwSTC+9KMHGSD6S 0AIJHkRxByekkIJKv3LPXbfMeOddgQmst+466xoAIUEEEUzAQNBD02H00UkvwnTTT0s9ddV4ZPEK 1hH/qTUnlyDyRi659BJMMLiEgrkoQSwTAjMefPIJ6KKPHnfppfeLCt6cCDFDmjT8AMP7MJywwQW0 1187Aco5osUYyGNtjC+ccFwhzuCK6U0OF2uoQht8FAMEoMADnfge+M7Xrwpa8HyhI0X6JGCwDGhg fvYLoe1wRzSj9c53THsa1KRGNS6oYQxZ0AXyjKGLUlzCEoeIQxjIRjnKTYESC/7EnjJyYAIRRMF7 4Auf+Cp4vtRxghNOiEAHjxTC+k3gfsp5ghPSAIqMBeoUlkjEIeYgBzjwEBdonEIOgmgWSDlgC0h8 YgabSEcncuITUZQBwYxERftRYAIToEDtbie0EhbthL9TofBa6IT9jeEVgQpUJcZoCDEUcHqUw8UU ysBGZZQgBAvAgSfimMQMmjJ0T/SeGiKgRw3w8QKz+2Mgp/UALKamC1FYwha1AElJzkEMYiDb5HqB wE2SRIjR0MEIGoCJUUqwlKd84h0/4QlMRKACezQSLAM5A2pR6wF/JGTudofIFAaPhVW7AxWooIX9 ZSELv4hnJYA5CjQScw1rUP/jMQeCgA/gQA2ecOYzpUnQaVKzmtfM5pEkMIFpebMCtZwA/lJTBR88 YQlRcIITQBHPeNrhCEcwQhPQmM8EALEkAwnBDTBAhWYG1HukTCVMD4oJTBDBAgrNAEOnZYE/vomh 4jQk75KWyHNGrYWO0KUT1tlOWnRUCUdQQhOaoIQ12GEKsVCgEAVSAge88RIufelMxxrQal7iEkLg oCv5uFOffvOPE0XMMvjggy74IAoZ3UI8aYEEJUh1CkoggxIOUIbCbFUZyczADM4K1rI69rHVxARj kyDFtRppp9OawR8pAFQS6s6EvSuq0xZZNS444gkZ1SgVQkELWvjMr1QlQgT+pgALG+yTIDrgwAPo wFiwhtWxNZUsYxVBWYX6YAYT0CwgHwDRB0i0PNGoghTsCoQoaEIYQhCCz7ZLhCYoIAdD+ZEyQqAB C4xBEb09a3Brmt5LBE0RWYiAB/mo2EBSoJvfdG5QP3vI0JpztOgsLR8y8QTU4jUK2U2wEIagBAWU AQy3JcgIUqSF97b3wu9VhCXQwErLKpYCDvXmmygQV+UEQLpScKUPfACEFjuBCGuAhQ4gXBLxIjZa QrBEhtGL3rPyOMOWCHIiOkxfCzT0oc2lwH7J6d+lKTLAVfPIdAu8hCUAwQlCIIMBikAJCEeYIMm4 gAxmkIggB3nHOzazJcb+QIXZ6bHIIPZmT0FMYj2RyUw50EEZRIAASnzheoctSJEekIgyq/nQalaE E2QXAYHlFANx1iyILYDcJYOWqP9d4VFLi62PgEQkGAl1mI5p44HcYMxoQISqC21oIYcxDUuowOwk IAMOTDEDGAAnBR5gARyAE5Al1pMytIM5UiuEBxWwQBIOoepmO1sRd/BBBWgnMGo9a758xECmcOBr QE5Av55lMqadbNThldYjX/h0qEVyvVIDiFpEOIS85b3qOjBBBrODgL4foCZoWVsG2cZAt5fL7ToL WyAVWeAxA42QScjgAkQoRCHmrYhGgDAC+s54AjbAAQ4s4GDeFHOuvf3/ABwMQBgiUHK4L620TJP2 3J7WSEhG1MmJRKILsJzDxBfxhfLWL+MZn4AGOm5rgj2cWrJ8wAB2sAMRFEMYBtcTRUpCdXcbZDV8 sIAExoAHHuA7At2sYv3Q5PEOQmvXTE/7DlCu8kLyd6gtJzeANw3zPaRb5uwOIkoV0gY2SNsCgG+0 DFJwJFhWMbkDK7qHRcD4xjMeBxMoQAGEHYSpWz0hPlhANHxggWtyYBnMQAYIKvBwCZj+9GCHqAUc kFMdOF4EOzBAAXoA2JX3d9zAm7u5oxxzW4164doaiAM0rwwU0IAHz4hGAEDfAjH74PTQn4G0EpAA Z9HX9Y03wAEKcIAB/oDAYQc/CQkcEIBoPAMGzoDBM2KwfGa0QAMXOBLg5y8B6V/gAVNowhQogIEV 61kEDXAAPdADTVAJaKBjtgd3KCR3mrZ7nWZ36kZzx0QIV5AQGNAC5Xd+x6B+7Md8KYBN0oZkziIt E4AAKTAACtBQ8ZIA3NcBKrAMMRB+RfEAzLAM0aAMz/ACLwANyrcMyNACKXABCwA40VKEFPBwRtYE cjAHhmAEU5AAAzgFYjAHrHZmCVhODPhyvAeBtkJzNUYIs5AQNLgM5VeBV9CDoQeEIZABICADbviG FBAtRqYAzCAQAVACOSAACFACMngYFqACNRgAgiiIy+CDLQCEJCAD/yWgAV7ViHF4ATOQAFMABxI3 cWM0B6tWhQjoduIWd7nXgC20hXfHbkOBPRSYECFgAchQg4VYiMyQhikAAjdwAStgAydyIm1yARVA AQXQASvQhzYSAA2AAav4iq/4g0AYiyRwATRQAiqgAggwAxYgA7t4AAcQAjcIjBTSAgYwAySADOB4 iMkoi7uCAQuQJBYgZj3FfQOwDNpYJSnQAROAAZozjuS4AAsAfzLgAGzyACzYfXX4jlVSAmVAfQ+w MCRgAyRAAvhIMCmCXNtXAAYQAu4okHryAzaAARNgjQYJJxNAfRF5AAaQAy2QjRYpdWBQBV2QawrA gpLHfQpgAA1ggiMrYJInKWxIsRhfUAU82ZMj0Iwr8AM3qY3E9ntVV3lDWSUBAQA7 --fyypnfsa Content-Type: image/gif Content-Transfer-Encoding: base64 Content-ID: <auagscs> R0lGODlhDAAMANUAAP////f3//f39+/v9+/v797m987W787W5sXW5rXF76295qW975y175St75St 3pSlzoyl1oSl5oylzoycxXOU3nOMxWOM5mOM3mOE1lqE3mOEvVKE1lp7xVJ71lJ7zlJ7xVJ7vUp7 zkpzzkpzxVJzrUprvUJrxUJrvUJjtTpjtTpjrTparTpapQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACwAAAAADAAMAAAIjAABAAhwwMGFCxAQ CACwkICDDBYSLGjQwQEBhg8zDBAIYIEIBwIQdLjAoOOFgSFMIICwIUMEAxQwCBxhAgKHDh5C6DQA IIGJEyA4fPAwYoQCAAVKoEgBQsKJEidQ8CyRYumDA1VTqNBQQYXXFQofsPB6AIAKFiweNBTLoiza BxcFCjgwgQSJCQcWCggIADs= --fyypnfsa-- --iykfruntqrdixue Content-Type: application/x-compressed; name="upgrade6633.zip" Content-Transfer-Encoding: base64 Content-Disposition: attachment --iykfruntqrdixue-- Tag: Issue USB Port Reset in WInCE Tag: 44356
  - 14
    - Interface s1d13806 LCD driver to wince4.1 Hi I am trying to put the epson LCD driver (s1d13806) to Samsung S3C2410 procssor on wince pb4.1. I have removed the samsung LCD driver and inserted the epson driver into my platform. when I build the platform, epson source files are not built. Could anyone help me out. Tag: Issue USB Port Reset in WInCE Tag: 44355
  - 15
    - xscale doubt We have here with us a pxa255 processor board from hybus. It has 2 intel strata 16 MB flash, (so total 32 MB) one 64 MB SDRAM. It has a cs8900 ethernet adapter. We are using windows ce platform builder 4.0. I read that it support xscale architecture. We are having a problem, and do not know how to modify things to get the image loaded on to the board. We build a image by chossing XSC1BD architecture, and a PDA kernel. We did not modify boot.bib or config.bib, since we are not aware what we need to put in these files. We saw the fwxsc1.s file (startup file). we are using the jflash utility to flash eboot.bin into the flash memory. i was not able to understand, when i restart the board, nothing is happening, i am not even getting any stirngs on my hyperterminal, i doubt it is even going into the startup code. What are the things i need to modify to get the strings in the startup code to appear on the hyperterminal. thanks and regards prasanna Tag: Issue USB Port Reset in WInCE Tag: 44354
  - 16
    - .BIN file format Hi everyone, Could someone please clarify the "Image Length" field? The description says that it is the "Physical length, in bytes, of the image." Does this mean the total number of bytes in the image or the total number of bytes that the image spans? Either way, it doesn't seem to make much sense. I have an eboot.bin file that has an image length field of 45992 bytes, but the size of the file itself is only 41k approximately. Can anyone explain how this field is calculated? Regards, Glenn. Tag: Issue USB Port Reset in WInCE Tag: 44345
  - 17
    - Bluetooth device name. Hi All, When another device (desktop) detects my bluetooth enabled WinCE 4.2 device, it uses the device name field in the System -> Device Name control panel tab as the CE devices' name. However, if I change that name in the control panel of my CE device and try to rediscover it on my desktop, the old name is used. The new name is only used after a suspend/resume or a reboot. Is there anyway for the bluetooth stack to pick-up the new device name. Cheers Danny Tag: Issue USB Port Reset in WInCE Tag: 44336
  - 18
    - Taskman shell sample in CE.NET4.2 Hi All, In CE.NET4.2 the Taskman Sample Shell is no longer selectable from the Catalog, however, the support is still there. My question is how to include the Taskman Sample Shell (and exclude Standard Shell) in my 4.2 build. Your help is greatly appreciated! Jin Cooper Tag: Issue USB Port Reset in WInCE Tag: 44335
  - 19
    - How does TAPI (unimodem) know a device is attached or removed? When a modem is attached or removed, how does TAPI (unimodem) get notified? I am asking this because of a related problem. When I find a bluetooth modem and I activate it in the "Bluetooth Device Properties" control panel I can set up a dial up connection to it in the "Network and Dialup Connections" control panel. However, when I delete that device in the Bluetooth control panel I can still create a new dialup connection to it. RasEnumDevices() still returns this device. I think that this maybe done on purpose. Looking at the unimodem code I see that when it gets notified of a device being removed it actually marks the device as disconnected, out of service, and removed but does not delete it from it's list of devices. Is this why this device is still returned when I call RasEnumDevices()? Is this the expected behaviour? If yes, why? I would expect that if I delete the bluetooth device, the RAS device would be deleted as well. Cheers Danny Tag: Issue USB Port Reset in WInCE Tag: 44331
  - 20
    - Confirmed ARMV4 Compiler Bug in PB4.2 Microsoft has confirmed that they have a 7-byte-structure-passed-by-value compiler bug in the ARMV4 compiler used with PB4.2. This happens in both debug and release code, so it is not an optimization issue. Since I am the only one to have reported this bug, and because it is known to not be a problem in the version of the the compiler that will be shipped sometime in the future with the next version of CE, they have chosen not to put any effort into fixing it for the current version. The issue can be reproduced very easily. The following C code snippet will reproduce the issue by calling test1: struct test_struct { char byte1; char byte2; char byte3; char byte4; char byte5; char byte6; char byte7; }; void testsub1 (struct test_struct var1Copy) { // Assert (var1Copy.byte7 == 7); char ch; // Set breakpoint on following line and look at var1Copy // Bytes 5, 6, and 7 are duplicates of bytes 1, 2, and 3 ch = var1Copy.byte7; } void test1(void) { struct test_struct var1 = {1,2,3,4,5,6,7}; // If a breakpoint is set here, and the assembly code // is stepped through, you will see that the first // dword is used twice, and the second dword is never // used. testsub1(var1); } I remain surprised that any known compiler bug would be considered non-important (didn't Intel make that mistake with an "infrequently" used opcode error in a Pentium chip?). It was also mentioned (but not verified) that this same ARM compiler is likely used with the eVC++ 4.X tools as well. The only way to verify that this is not an issue in your code is to search out all the structures and verify that either they are never 7 bytes long, or that they are never passed into a function by value. I would much rather see a QFE to fix this, but I am unfortunately resigned to search through our code and make sure no structures are ever passed by value. If others are bothered by this too, please speak up. Arthur McNair Pittsburgh, PA Tag: Issue USB Port Reset in WInCE Tag: 44330
  - 21
    - Steps needed to enable screen rotation Hello all, In all of my past efforts with screen rotation, I've been blessed with a LCD controller that supports hardware rotation of the frame buffer. Unfortunately now that I have a system that lacks this convenient feature, I have a customer that wants to rotate their screen. So my question to the group is this: what are the steps I need to take to support screen rotation within my standard GPE-based display driver. Specifically I'm looking for registry entries, libraries I need to link to, GPE calls that might need to be overridden, etc. Thanks for any suggestions. --kermit -- It wasn't easy being Greazy ....but it was interesting. Tag: Issue USB Port Reset in WInCE Tag: 44321
  - 22
    - Audio Architecture Details Hello All, We have a dual processor system with a custom dsp and a ARM9 processor. Arm9 is the master of the chip and we have certain protocols to communicate with the dsp and execute tasks(especially audio decoding) on it. Windows CE will be the OS which will be running on the Arm. The following figure shows the data flow for the audio data. ED ------- DD ------ -------------- ---| DSP |---->| DMA |--->| Audio Device | ------- ------ -------------- ED = Encoded Data, DD = Decoded Data Now we are trying to design a suitable multimedia architechture for the above described system.What i found from the CE documentation for Audio, i can use i) UAM and ACM for playing MP3 etc ii) To use the DirecShow architecture for Audio i.e to have filters that provide inteface to the DSP decoder. I am trying to evaluate the best suited approach for my system. But i am facing the following problems. Data decoded from the DSP can be directly transfred to the audio device using DMA. If i use any of the above approaches, i need to write ACM wrappers to interface with the DSP. This wrapper will receieve buffers of compressed audio, will shuttle the data over to the DSP, and the DSP uploads the results as per the current architecture and it cannot use DMA to directly transfer data to the audio device, as client of this wrapper would be waiting for the decoded data. a) I don't want to upload this decoded data rather play it directly using DMA. Is this possible with any of the above approaches? b) What are merits/demerits of the above approaches? c) Is there any other alternative to suit to my needs? Thanks in advance, A. Thirupathi Reddy Tag: Issue USB Port Reset in WInCE Tag: 44319
  - 23
    - Multimedia Architecture Details Hello All, I am new to Windows CE Multimedia. I have few doubts. 1) In which process slot (Nk.exe, Device.exe or etc.) do Wave API Manager, ACM and Video/Image Compression Manager reside? 2) Is there any good documentation for Wave API Manager, ACM and VCM apart from PB? i.e about the flow of data among these modules. 3) Is the source code available for these modules? 4) What is the difference between a AudioCodec and Waveform Audio I/O Device? Hope to get an answer, Chom Tag: Issue USB Port Reset in WInCE Tag: 44316
  - 24
    - HWUART vs Irda Hi, I want to use HWUART and Irda at the same time in my Xscale platform. But if HWUART is enabled, I can't use Irda. I test the Irda with ActiveSync 3.5. If HWUART is disabled, I can use Irda with ActiveSync. In my understanding, there should be no conflict between HWUART and Irda. Can somebody help me ? Irnita Tag: Issue USB Port Reset in WInCE Tag: 44314
  - 25
    - Geode/MediaGX audio driver BIG problems Hi! For 1 week i'm trying to install audio drivers for PCM- 5822 Biscuit PC without any succes. Drivers are loaded, NO errors comming, i debuged all driver loading process - all control points are fine. I used Geode/MediaGX Audio (Unified) or Geode/MediaGX Waveform Audio Device drivers. But no sound! On the same platform under Win98 audio works FINE!!! All drivers are native, produced specially for geode platform - why it is SO BIG problem to use them? WHERE IS AUDIO MIXER? Maybe i have all volumes muted, but there are no ways to check it! Maybe I can post this question in other place? PCM-5822 is so popular platform... PLEASE HELP! Tag: Issue USB Port Reset in WInCE Tag: 44313

Hi Tech Gurus,
This is in connection with issuing a USB
port Reset.
Can I issue a USB Port Reset from the application/driver
dll. Pls advice.
The need being erasing of firmware in the device is what
i want to do. For that I need to issue a Reset to the USB
port.
Pls suggest
Cheers,
Lakshman

Top

Re: Issue USB Port Reset in WInCE by Jack

Jack
Thu Nov 13 02:56:55 CST 2003

Yes, I have the same question.
For the need to re-initialize the usb carmera.

Thanks.

Jack.

"Lakshman" <laksh_peri@yahoo.com>
??????:0a3801c3a9af$4dff1700$a301280a@phx.gbl...
> Hi Tech Gurus,
> This is in connection with issuing a USB
> port Reset.
> Can I issue a USB Port Reset from the application/driver
> dll. Pls advice.
> The need being erasing of firmware in the device is what
> i want to do. For that I need to issue a Reset to the USB
> port.
> Pls suggest
> Cheers,
> Lakshman

Top

Re: Issue USB Port Reset in WInCE by Marc

Marc
Thu Nov 13 20:42:08 CST 2003

I don't know if these will result in power cycling the USB bus for the
device, but you might try ResetDefaultPipe() or
DeactivateDevice()/ActivateDevice.

This can also be done by issuing a Vendor Specific command that removes
power from the devices pull-up on D+ or D-.

Marc Reinig
System Solutions

"Jack" <jgliu@toptrend.com.cn> wrote in message
news:eNka5RcqDHA.2716@TK2MSFTNGP09.phx.gbl...
> Yes, I have the same question.
> For the need to re-initialize the usb carmera.
>
> Thanks.
>
> Jack.
>
> "Lakshman" <laksh_peri@yahoo.com>
> ??????:0a3801c3a9af$4dff1700$a301280a@phx.gbl...
> > Hi Tech Gurus,
> > This is in connection with issuing a USB
> > port Reset.
> > Can I issue a USB Port Reset from the application/driver
> > dll. Pls advice.
> > The need being erasing of firmware in the device is what
> > i want to do. For that I need to issue a Reset to the USB
> > port.
> > Pls suggest
> > Cheers,
> > Lakshman
>
>

Top