How to get IrSIR work?

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Including asp.dll in build Does anyone know of why asp.dll would not be included in the build when sysgen_asp = 1 is defined. I have been tring for some time to sysgen a os that will support asp. Html files serve up quite nicely, however, .asp files generate 501/505 errors. Upon investigation I realized asp.dll is not included in the release directory. Obviously I'm missing some flag/setting/component, but of couse I don't know which? Thanks Tag: How to get IrSIR work? Tag: 113064
  - 2
    - BSP Template sample code now available Hey all, I just wanted to let you know that some new sample code is available for CE BSPs. It's a template that illustrates stubs of all required and optional OAL and KITL functions. It also tries to explain things incrementally so that newcomers can understand. You can download it from the CE Base OS blog, here: http://blogs.msdn.com/ce_base/archive/2008/05/30/bsp-template-now-available-for-ce-6-0-ce6r2.aspx I hope that you will find it useful. -- --Travis Hobrla This posting is provided "AS IS" with no warranties, and confers no rights. Tag: How to get IrSIR work? Tag: 113056
  - 3
    - Warm boot / fails to re-initialize system Hi I have an Aaeon PCM8152 / Celeron M running standard CEPC winCe5.0. When I warm reset the system, or switch is off/on within a few seconds, I get this error. The bootloader runs fine, but afterwards the first part of kernelinit fails =96 the system never recovers. Leaving the system for 30 sec. it alwayes powers correct up. *************************************************** INFO: code=3D0x4. INFO: code=3D0x4. Jumping to image (address=3D0x224588) Debug Serial Init SysInit: Mapping Extra RAM from 0x84000000 to 0x9ac00000 GDTBase=3D8235b0e8 IDTBase=3D8237c860 KData=3D82385800 Windows CE Kernel for i486 Built on Feb 8 2007 at 23:34:04 g_pPageDir =3D 82388000 Double Fault -- backlink=3D0048 TSS=3D8237d060 EIP=3D80233ef1 Flags=3D00210082 Eax=3D00000000 Ebx=3D8237bd04 Ecx=3Df000e987 Edx=3D8237bdd0 Esi=3D9db79000 Edi=3D8df78000 Ebp=3D8237bcf8 Esp=3D8237bc94 CS=3D0019 DS=3D0040 ES=3D0040 SS=3D0021 FS=3D0018 GS=3D0018 *************************************************** As I can understand this problem is not isolated to my target. The most interesting solution I have managed to find is implementing a call to NKForceCleanReboot in OEMInit(). Questions: NKForceCleanReboot is not declared in any of my header files. Am I suppose to implement it myself? Using the CEPC standard BSP I=B4m not sure which file my OEMInit() is located? Perhaps someone have done a similar fix up of OEMInit() and can show how? Any other suggestions or comments? Best regards, Jonas Tag: How to get IrSIR work? Tag: 113043
  - 4
    - add compact framework to nk.bin Hello, I have a nk.bin runtime winCE6.0 image and I would like to add the 3.5 Compact Framework. I do not have the whole Platform Builder project, I can't re-build it with the CF35. Is-it possible ? arnaud. Tag: How to get IrSIR work? Tag: 113038
  - 5
    - Adding mmtimer to Coredll.dll Hi all, I'm trying to add Multimedia Timer Support to my OS Image. Therefore I need to include mmtimer.lib into the Image and linkt it to Coredll.dll. I am currently stuck on how to link a component to Coredll.dll. I tried using the same mechanisms as detailed in Kurt Kennetts article on how to "Replace a COREDLL component in WCE 6" but without success. Please point me in the right dircetion. TIA, Bjoern Tag: How to get IrSIR work? Tag: 113026
  - 6
    - Serial communication problem.. Hi I'm trying to implement basic serial communication. I'm using the CreateFile method. I created a WCE Console Application. On building the project i get this linker error. I don't know how to resolve it. I don't know why but i'm unable to change the project settings, in the sense, the Project Settings options is disabled. Do i need to add/ change any libraries or dlls? i think that fn. is under kernel32.lib and kernel32.dll. Pls help me out. The following is my program and error msgs. Also pls check if what i'm passing as arguements are valid. I want to be able to use COM1 and i'm not sure how to set it. #include "stdafx.h" HANDLE hFile; #define BUF_SIZE 80 int _tmain(int argc, TCHAR *argv[], TCHAR *envp[]) { //_tprintf(_T("Hello World!\n")); OutputDebugString(L"Running"); HANDLE m_hComm = CreateFile(L"//./COM1",GENERIC_READ | GENERIC_WRITE,0,0,OPEN_EXISTING,0,0); return 0; } error LNK2019: unresolved external symbol CreateFileW referenced in function wmain BUILD: [01:0000000036:ERRORE] obj\ARMV4I\retail\cook.exe : fatal error LNK1120: 1 unresolved externals Tag: How to get IrSIR work? Tag: 113019
  - 7
    - DDEX1 (DirectDraw App) failing in DirectDrawCreate Hi, While running the DDEX1.exe (DirectDraw sample application) on WinCE 6.0 on CEPC the DirectDrawCreate() fails with the return code E_OutOfMemory (0x800700E) and following error comes in PB's debug window. Error: 4294847715 PID:32e0002 TID:32f0002 GWES Hook fails device creation. DirectDrawCreate fails. 4294847731 PID:32e0002 TID:32f0002 DDEX1: DirectDrawCreate FAILED 4294847798 PID:400002 TID:32f0002 DeleteFromProcessInputLocaleTable: Deleted process from ProcessInputLocale table, hProcess: 0x032E0002 4294847798 PID:32e0002 TID:32f0002 OSAXST1: <<< Unloading Module 'ddraw.dll' (0x8845D8A8) at address 0x404B0000-0x404C6000 in Process 'ddex1.exe' (0x8841E000) The function call sequence i am seeing here is DDEX1.EXE --> GetDriverInfo --> CanCreateSurface --> CreateSurface --> HALLock --> HALUnlock --> HALDestroySurfcace I dont know whether the above sequence of calls correct or this is happening because of some error. Can anyone tell me is this sequence correct or something going wrong? What may be the possible reasons of above errors? or How can I debug this as there is no middleware code available? Thnaking you in Advance and hoping for reply. Vikas Patil Tag: How to get IrSIR work? Tag: 113018
  - 8
    - Mass storage issue on Windows CE 5.0 Hi, I am trying to get peripheral mass storage working on my Windows CE 5.0 device .I have 3 partition in my NAND flash with Bootpart library. (1st BINFS for Nk,bin , 2nd FAT for Hive Registry, 3rd again FAT rest of the space ).I am able to get the 2nd and 3rd partition as separate drive in Host PC.One of the problem i am facing is if i plug the USB initially and try to boot the device it will hang . This i feel is because when it tries to enumerate as mass storage it will unload the filesystem dll from the device( both partition is having the same filesystem) . Since hive is on one drive it is causing the problem .I tried without hive and it works fine .Could anyone suggest a way of getting hive and mass storage working together. Regards Wins Tag: How to get IrSIR work? Tag: 113014
  - 9
    - How to popup the soft keyboard automatically? My device has no graphical shell , but I have added the SIP component into the OS, and I can show the SIP through the SipShowIM API. But I want the SIP to popup automatically , when any edit control get input focus. So what should I do ? Thanks! Tag: How to get IrSIR work? Tag: 113013
  - 10
    - sdram issues hi,everyone I am upgrading my sdram configuration for 128M, Frist of all,I show my platform, CPU : Xscale pxa255 OS : Windows CE .Net 4.2 Flash : 32MB SDRAM : 128MB (32MBX4) since I have heard that it only spend 2 hours on this issue, why it cost me more than one week to solve the problem... Okay,let's see the process. I modified some files related, config.bib,memdefs.h,memmap.inc,xsc1.h,xsc1.inc,xsc1bd.h,xsc1bd.inc, fwxsc1.s,platform.reg.(if i missed some file,pls tell me) At first,i always modified all of files related, then the kernel hung...I can not find where is the problem, so,I modified some files step by step, I just changed OEMAddressTable in memmap.inc, DCD 0x80000000, 0xA0000000, 64 to DCD 0x80000000, 0xA0000000, 128 and I also modified xsc1bd.inc, MDCNFG_VAL EQU 0x19C119C1; SDRAM Config Reg (CL=2) to MDCNFG_VAL EQU 0x19C319C3; SDRAM Config Reg (CL=2) then,sdram register MDCNFG enable the bank1 which is also 64MB. After two changes above,I download the kernel,it still works. Then,I just modified config.bib MEMORY IF IMGFLASH ! NK 800B8000 02000000 RAMIMAGE ; SDRAM 32MB: [800B 8000 -> 820B 7FFF] RAM 820B8000 01C00000 RAM ; SDRAM 28MB: [820B 8000 -> 83CB 7FFF] EDBG 83F8D000 00020000 RESERVED ; x20000 for EBOOT - 3 Client memory pools of 24K (128K) ENDIF AUD_DMA 83CB8000 0000A000 RESERVED SLEEP_SAV 83CC2000 00001000 RESERVED DRV_GLB 83CC3000 00001000 RESERVED CACHE_FLG 83CC4000 0003C000 RESERVED ; for use by cache routines: 83CC_4000->83CC_4003 used for flagging. 83CC_4004->83CC_4803 rsvd for miniD DISPLAY 83D00000 00130000 RESERVED ; 1MB aligned BLOCK_BUF 83E30000 00080000 RESERVED UNUSED_BUF 83EB0000 000DD000 RESERVED whql_sig 00000001 00002000 EXTENSION ; WHQL signature extension (6KB). ZBANK 86000000 00100000 RESERVED to IF IMGFLASH ! NK 800B8000 02000000 RAMIMAGE ; SDRAM 32MB RAM 820B8000 05C00000 RAM ; SDRAM 28MB+64MB EDBG 87F8D000 00020000 RESERVED ; x20000 for EBOOT - 3 Client memory pools of 24K (128K) ENDIF AUD_DMA 87CB8000 0000A000 RESERVED SLEEP_SAV 87CC2000 00001000 RESERVED DRV_GLB 87CC3000 00001000 RESERVED CACHE_FLG 87CC4000 0003C000 RESERVED ; for use by cache routines: 83CC_4000->83CC_4003 used for flagging. 83CC_4004->83CC_4803 rsvd for miniD DISPLAY 87D00000 00130000 RESERVED ; 1MB aligned BLOCK_BUF 87E30000 00080000 RESERVED UNUSED_BUF 87EB0000 000DD000 RESERVED whql_sig 00000001 00002000 EXTENSION ; WHQL signature extension (6KB). ZBANK 8A000000 00100000 RESERVED and also changed the other related addresses in memdefs.h,xsc1.h,xsc1.inc,xsc1bd.h,xsc1bd.inc. for instance: i modified #define MEM_BASE_PHYSICAL 0xA3CB8000 #define MEM_BASE_C_VIRTUAL 0x83CB8000 #define EDBG_PHYSICAL_MEMORY_START 0x83F8D000 // Ethernet Debugger Pool Address to #define MEM_BASE_PHYSICAL 0xA7CB8000 #define MEM_BASE_C_VIRTUAL 0x87CB8000 #define EDBG_PHYSICAL_MEMORY_START 0x87F8D000 // Ethernet Debugger Pool Address It seems that all the PHYSICAL address should not be modified, I try it before,but also do not work out.. so at last,I made the above change. And during these days,I also tried to debug images, but it just hung as the release image.. anyone pls help me,I was a bit confused now.. thank u for suggestion. Tag: How to get IrSIR work? Tag: 113012
  - 11
    - Debug image - KITL - hang PB5.0 I built a debug image just by choosing the debug version from the drop down menu. It is working fine for few minutes, after that it just comes and stops at the KITL statement(debug statements below). I have not enabled "Enable KITL" in build options. I'm not sure why it stops at kitl always ? I have enabled only the following check boxes in platform->settings- >build options Enable CE target control Enable eboot space in Memory Enable full Kernel mode Could you guys help me on why my debug image stops at the KITL statement ? thnks, rishi ***************************************************************** KdTrap: JIT debugging requested, waiting for OEM selection KdTrap: JIT debugging accepted +KITLRegisterDfltClient, service:2 LAN91Cxxx: Chip Id 9 Revision 2 KITL: *** Device Name MAINSTN7757 *** built on [May 14 2008] time [18:56:42] VBridgeInit()...TX = [16384] bytes -- Rx = [16384] bytes Tx buffer [0xA295EE60] to [0xA2962E60]. Rx buffer [0xA2962E80] to [0xA2966E80]. VBridge:: NK add MAC: [0-0-70-26-1E-4D] !KITLRegisterDfltClient: Fail to initialize KITL +KITLRegisterDfltClient, service:2 LAN91Cxxx: Chip Id 9 Revision 2 KITL: *** Device Name MAINSTN7757 *** Tag: How to get IrSIR work? Tag: 113011
  - 12
    - Import fmd driver to platform builder Hi, In fact, there is a nandflash driver and there are BuildExe and FMD directories in this in my sbc's(s3c2440)cd.But it doesn't seem under bsp in platform builder.I checked .cec file of bsp.Its settings seem correct.But when i want to link this to the platform builder project file(I don't know whether or not it is necessary),i can't.Because the platform builder file's extension is pbxml, not pbpxml which cec editor requires. So what is my problem? Thanks in advance. Tag: How to get IrSIR work? Tag: 113005
  - 13
    - Unknown or old version of bootloader Dear All, When I load my Image By loadcepc there is a message which shows that my Image doesn't contain any Valid bootloader. So after load completes my system hangs. Here is the detail of my project. I use Win Ce 6.0 . Hardware: Vortex SX-6154(ICOP company) 1-Board Support Package: ICOP_Vortex86_60B: x86 2-Design Template: Industrial Device 3-Design Template Variants: Internet Appliance 4-All next Steps: Default options are selected 5-I Disabled All build options. I just enabled â??Enable Ship Buildâ?? AND â??Run-time image can be larger than 32Mâ?? 6-I added IMGRAM128 = 1 Variable into Environment variable list(I tried without this variable too) I compiled My project in release mode. I made a DOM dos bootable. I copied NK.BIN into DOM. I booted my system and I chose first option(Loadcepc /v NK.Bin). The following Message apeares during load process: Enter a choice: 1 Warning A20 line already enabled 1 PCI bus (Version 3.00) using Configuration Mechanism # 1 Total free extended memory = 65471, largest block = 65471 Block allocated at 0x110000 Loading nk.bin, size = 17908451 nk.bin: Unknown or old version of bootloader Image physical start = 0x00520000, size = 18238216 Section physical start = 0x00520000, size = 16 Section physical start = 0x00520040, size = 8 Section physical start = 0x00520048, size = 4 Section physical start = 0x00521000, size = 28672 Section physical start = 0x00529000, size = 167936 Section physical start = 0x00552000, size = 391228 Section physical start = 0x005B183C, size = 27620 Section physical start = 0x005B9000, size = 1148 Section physical start = 0x005BA000, size = 385592 Section physical start = 0x00619000, size = 25632 Section physical start = 0x00620000, size = 176292 Section physical start = 0x0064C000, size = 8140 Section physical start = 0x0064E000, size = 584244 â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦. After All other sections are loaded, the following message appears and system hangs: Jumping to 0x005224F0 When I do the same with demo Image the Image physical start is 0x00200000 and system starts and the message which shows that there is no bootloader doesn't appear. Would you please tell me what the problem is???????? Thank you in advance M.Samoody Tag: How to get IrSIR work? Tag: 113003
  - 14
    - FAL source code available? i can't find it in both public and private folder. i want to debug my FMD deeply. thanks Tag: How to get IrSIR work? Tag: 113001
  - 15
    - How to replace a dll... Hello, all. (currently developing a WM6 phone) I know that I can replace a dll file using ActiveSync and debug some faults. Now, I am looking for a debug point, but I can't simply replace a dll using ActiveSync. I can see the message "the file is copied" but cant see any message that I have put in. I think that there are some files that we can't change in the simple way. If any guys know about it, help me. I wanna go home! -- Engineer (Developing Windows Mobile PDAs) Message posted via http://www.pocketpcjunkies.com Tag: How to get IrSIR work? Tag: 113000
  - 16
    - Clean format of monolithic filesystem Hi, I have a running OS image that uses Intel PSM 4.0 to make some flash into a 'disk' on CE5. This is set up such that the Storage Manager AutoLoad registry section is used to load the driver. Everything works fine. However, I'd like to have a relatively simple way to return a given device to 'factory default' configuration, including deleting any shadowed files that are stored on the PSM volume, preferably without adjusting the registry, etc. and forcing a new test cycle for the OS build. Unfortunately, items loaded from the AutoLoad segment of the Storage Manager registry are not accessible as "volumes" and, as far as I can tell, can't be accessed as though they are real filesystems. I'd like to simply pass a IOCTL_DISK_FORMAT_MEDIA to the driver and be done with it (it's designed to handle that IOCTL), but I can't get a handle which I can use with DeviceIoControl() to do this. The situation is similar to trying to operate, as a whole, on the Release folder filesystem driver, which seems to suffer from this same problem. Thanks for any pointers to ways to do this. Paul T. Tag: How to get IrSIR work? Tag: 112997
  - 17
    - CPCEnablePcmcia, SetEvent and WM_QUIT Hello all, In the deconstructor of the PCMCIA model device driver class, CPCEnablePcmcia, the event handler thread created by this class is closed with both SetEvent(m_EventList[TERMINAGE_THREAD]) and PostThreadMessage(...WM_QUIT...) function calls. Does anybody know why both methods of closing the thread were included in this public class? I've modified the code to just use SetEvent (I removed the line =93PostThreadMessage( GetThreadId(), WM_QUIT, 0, 0 );=94) and this modification still allows the thread to close cleanly and everything proceeds as expected. This closes the thread because the thread is waiting on the TERMINAGE_THREAD event in its WaitForMultipleObjects call. The reason I'm asking is that there's a stage in our device's boot process where an error occurs when CPCEnablePcmcia calls PostThreadMessage(...WM_QUIT...). I was wondering if removing this line would be a possible solution to avoiding this error. I=92m not sure what purpose this line of code serves. Thanks in advance, Jared Tag: How to get IrSIR work? Tag: 112996
  - 18
    - Environment variable building platform I have several projects that use the same platform. I would like to slightly change the code in the platform (with #ifdefs) depending on the PBWorkspace that I currently have open. I tried using Platform Settings, Environment, and setting a variable there which I hoped to #ifdef during compilation of the platform. But it doesn't seem to pick these up in C or CPP files. What's the suggested method to tackle this problem? Thanks Tag: How to get IrSIR work? Tag: 112994
  - 19
    - PhoneSendDTMFStart in WM5 I need to send DTMF tones over exisitng call. In WM6 you have the PhoneSendDTMFStart and Stop functions, are these not in WM5. I am not using TAPI is there some other high level way of doing it in Wm5. Please help Thanks Tag: How to get IrSIR work? Tag: 112988
  - 20
    - Breakpoint instantiation Hi All, I'm trying to debug a simple Hello World application on a phytec iMX31 board. But when I set breakpoints on myhello.cpp file, the breakpoints look like a red hollow circle with a yellow caution triangle. When I download the module to the board, the breakpoints are never active/instantiated. The application runs and it resides in the modules section of the ce.bib file. Where can be my fault that I can't set breakpoints correctly? I read many things about source path mapping, etc. but none solved my problem. Thanks in advance, Selin Tag: How to get IrSIR work? Tag: 112983
  - 21
    - How to Export BSP in Wince 6.0? Hi all, I have build one BSP and i want to export it (i.e.create .msi file). In Wince5.0 it is easy there is option Export BSP but in Wince6.0 (Visual Studio 2005) not that type of option. Is any body know how to Export BSP in Wince6.0? Thanks in advance Swapnil Tag: How to get IrSIR work? Tag: 112981
  - 22
    - mounting of the hive registry on sd card Hi All, I was working on mounting of the hive registry on sd card from one day still i am not succeded. Can anybody help me. for this purpose i have changed the platform.reg please find the changes i did. ; HIVE BOOT SECTION IF BSP_NOSDHCGUM ! [HKEY_LOCAL_MACHINE\init\BootVars] "SystemHive"="\\PSM\\system.hv" "StartDevMgr"=dword:1 "Flags"=dword:0 "DefaultUser"="WinCE User" "RegistryFlags"=dword:2 ; disable aggressive flushing [HKEY_LOCAL_MACHINE\System\StorageManager] "Flags"=dword:1000 [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SDHC_GUM] "Dll"="sdhc_gum.dll" "Prefix"="SDH" "Order"=dword:21 "DMAChannel"=dword:14 ;comment this out to disable DMA support "DMAIsrDll"="giisr.dll" "DMAIsrHandler"="ISRHandler" "DMAIRQ"=dword:19 ;"DMASysIntr"=dword: "DMAISTPriority"=dword:63 "DMABufferSize"=dword:10000 "ControllerIRQ"=dword:17 "ControllerISTPriority"=dword:64 "ClockAlwaysOn"=dword:0 "ClockOnIfInterruptsEnabled"=dword:1 "MaximumClockFrequency"=dword:989680 ;1312D00 "Flags"=dword:1000 ; Added for loading in Boot phase, not twice "BootPhase"=dword:1 ; block-driver based file system, must boot in phase 1 [HKEY_LOCAL_MACHINE\Drivers\Builtin\SDBusDriver] "Order"=dword:15 "Dll"="SDBus.dll" "Prefix"="SDC" "ThreadPriority"=dword:64 ; default thread priority for dispatch thread "RequestListDepth"=dword:30 ; pre-allocated requests "Flags"=dword:1000 ; DEVFLAGS_TRUSTEDCALLERONLY "IClass"=multi_sz:"{20FA98A8-B298-4b32-8D72-C716AEE2FA84}=%b","{6F40791D-300E-44E4-BC38-E0E63CA8375C}=%b" "Flags"=dword:1000 ; Added for loading in Boot phase, not twice "BootPhase"=dword:1 ; block-driver based file system, must boot in phase 1 [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\SDMemory] "Name"="SD Memory Card" "Folder"="Storage Card" ;"PartitionDriver"="" ; removable storage cannot have partitions "MountAsRoot"=dword:0 ; "MountAsBootable"=dword:1 ; bootable, may contain hive [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MMC] "Name"="MMC Card" "Folder"="Storage Card" ;"PartitionDriver"="" ; removable storage cannot have partitions ; SD Memory Storage class driver [HKEY_LOCAL_MACHINE\Drivers\SDCARD\ClientDrivers\Class\SDMemory_Class] "Dll"="SDMemory.dll" "Prefix"="DSK" "BlockTransferSize"=dword:40 ; send no more than 64 blocks of data per bus transfer "SingleBlockWrites"=dword:1 ; alternatively force the driver to use single block access ;"IdleTimeout"=dword:7D0 ; 2000 milliseconds ;"IdlePowerState"=dword:2 ; 0 == D0, 1 == D1, etc. ;"DisablePowerManagement"="" ; if value present, then disable (remove value to enable) "Profile"="SDMemory" "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}", "{A32942B7-920C-486b-B0E6-92A702A99B35}" "Flags"=dword:1000 ; Added for loading in Boot phase, not twice "BootPhase"=dword:1 ; block-driver based file system, must boot in phase 1 ; MMC Storage Class Driver [HKEY_LOCAL_MACHINE\Drivers\SDCARD\ClientDrivers\Class\MMC_Class] "Dll"="SDMemory.dll" "Prefix"="DSK" "BlockTransferSize"=dword:40 ; send no more than 64 blocks of data per bus transfer ;"SingleBlockWrites"=dword:1 ; alternatively force the driver to use single block access ;"IdleTimeout"=dword:7D0 ; milliseconds ;"IdlePowerState"=dword:2 ; 0 == D0, 1 == D1, etc. ;"DisablePowerManagement"="" ; if value present, then disable (remove value to enable) "Profile"="MMC" "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}", "{A32942B7-920C-486b-B0E6-92A702A99B35}" ENDIF BSP_NOSDHCGUM ! ; END HIVE BOOT SECTION I am using GumstixIII bsp on Wince6.0. With this changes i can able to load sdbus.dll and host driver (sdhc_gum.dll) successfully. but while loading the sdmemory.dll (Client) i am getting these Debug messages. OSAXST1: >>> Loading Module 'sdmemory.dll' (0x83EE6E04) at address 0xC0CC0000-0x C0CD9000 in Process 'NK.EXE' (0x82016AA0) DEVICE!RegReadActivationValues RegQueryValueEx(\Drivers\SDCARD\ClientDrivers\Cla ss\SDMemory_Class\BusPrefix) returned 2 DeviceFolder::LoadDevice(\Drivers\SDCARD\ClientDrivers\Class\SDMemory_Class) las t 9 TicksOSAXST1: <<< Unloading Module 'sdmemory.dll' (0x83EE6E04) at address 0x C0CC0000-0xC0CD9000 in Process 'NK.EXE' (0x82016AA0) SDBusDriver: Failed to load driver with path: \Drivers\SDCARD\ClientDrivers\Clas s\SDMemory_Class Tag: How to get IrSIR work? Tag: 112948
  - 23
    - Porting WINCE on arm9 processor Dear Friends, I have an embedded board with arm9 based 32 bit processor which has linux already ported on it. As vendor has not yet done it, I want to port wince on it. I have done required modification in the U-Boot bootloader and want to test it. I guess for that I need an wince image. Please feel free to provide any suggestion or hint on how we can create wince image with minimum functionality and capable to run on arm9 based 32 bit processor. Thanks, Ankur Tag: How to get IrSIR work? Tag: 112947
  - 24
    - Mounting Storage device with two physical partitions as two drives... hello, We have a storage device with two physical partitions of different sizes for which we have developed a storage driver(block driver using block driver IOCTLs ) in WinCE 5.0 and 6.0.Each physical partition has addresses starting from 0.Till now we have mounted one of the physical partitions with FAT file system and we perform read and write to that physical partition from our storage driver.Now we want to mount both the physical partitions as two separate drives during boot up itself using the same storage driver.We want FAT to manage both the partitions.I would really appreciate it if some one could give us ideas on how this can be accomplished.. Tag: How to get IrSIR work? Tag: 112943
  - 25
    - System timer not accurate Hi all I am using smdk2440 for wince 4.0. My problem is that the system timer run fast compared to real time. the result is that backlight time and suspend timeouts exhaust early instead at the time specified in settings. What may be the cause? kindly suggest. Many thanks -- Message posted via http://www.pocketpcjunkies.com Tag: How to get IrSIR work? Tag: 112940
- Next
  - 1
    - Windows CE 6.0 Driver Question In Windows CE 6.0, some drivers are moved to Kernel level and what is the critirea for deciding the driver is in the user mode or kernel mode. Is it some thing like developer can choose(In this case where to make the difference) or is it a predefined one like serial driver should be in user mode and some other driver in kernal mode(In this cazse where can I find the list). -San Tag: How to get IrSIR work? Tag: 112938
  - 2
    - ecdjpeg.dll and CreateJpegFile Hi, I've seen there's a CreateJpegFile function "available" in the JPEG encoding DLL ecdjpeg.dll (talking about 4.2 here). Did anyone ever experience using it or playing around with this? I have a piece of code that uses CreateDIBsection and draws / writes to it, but I'd like to save the end result as a JPG file instead of the bulky BMP I currently have. Alternatively, any BMP to JPEG conversion tool would do the trick provided it's not GUI based. Best regards, Alex Tag: How to get IrSIR work? Tag: 112937
  - 3
    - Memory Leak I'm using platform builder 5.0 and observing memory leaks. I think it has to do with csrss.exe launching the cmd.exe that the build scripts use, but I'm not sure. At any rate, after 3-4 clean builds, my commit charge is well over 2Gb. Is anyone else seeing this? I used a .bat script to launch many cmd.exe and then close them all. The commit charge would increase around 50Mb even after all cmd.exe's were closed. -Thanks Tag: How to get IrSIR work? Tag: 112932
  - 4
    - ANN: DShow MPEG-2 Demux Filter available again! The CE Multimedia team once published the source code for an MPEG-2 demux filter on the gotdotnet website. When that site retired, the demux code went with it. But now it's back, this time at http://code.msdn.microsoft.com/mpeg2demux. Please feel free to check out the resource page, download the code, and start...umm...demultiplexing! Thanks, -- Damon Barry Windows Embedded CE Multimedia This posting is provided "AS IS" with no warranties, and confers no rights. Tag: How to get IrSIR work? Tag: 112929
  - 5
    - Phone call with linemakeCall HI, I'm developing app for WM5 with VC++. Im using TAPI to make call with linemakeCall. How do i monitor how the progress of this call is progress eg dialling state and when its connected as i need to inform user on progress of outgoing call. Am i going about it right way? Tag: How to get IrSIR work? Tag: 112926
  - 6
    - Problems with mshtml.dll and Internet Explorer 6 Hi all, I am developping a on WinCE 5. And experiencing a lot of problems with Internet Explorer 6 for WinCE. In IESample I get the following error quite a lot: 17876 PID:6b8ea5a2 TID:b71efce Exception ffffffff Thread=8b6b8950 Proc=6b8ea5a2 'iedaily.exe' 17876 PID:6b8ea5a2 TID:b71efce AKY=00000021 PC=038c3b20 mshtml.dll+0x00173b20) ESP=0c3afaa8 EA=00000000 If this error occurs it effects the layout and performance of the websites I am visiting a lot. For example I don't get any background anymore, pictures from different buttons are disaperead and so on. It looked to me like it was related to the images in the cache. So I deleted the cache, this hadn't any result. Then I deleted the index.dat from my history. And the sites all worked good again for some time, troubles started to occur again in a matter of minutes. To cancel out the cache problem I disabled caching on my CE device, this seems to work, because I don't get the error anymore, plus everything stayed in place even after a day on the same website. The drawback of this of course is that the sites stayed slow, and my bandwidth usage increased. So I turned on the cache again, and I got the same error again in a matter of minutes. The cache settings I use are: [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\5.0\Cache\Content] "CacheLimit"=dword:00001000 [HKEY_LOCAL_MACHINE\Software\Microsoft\Internet Explorer\Image Caching] "Cache Size"=dword:1048576 "Item Size"=dword:65536 "Max Items"=dword:128 Now I have a couple of questions on this subject: Q1) What does mshtml.dll exactly do? Q2) What does the error description mean? Q3) Can it be that the index.dat and the files themselves from the "Temp Inet Files" are corrupt? Q4) Is there a way that I can read out the information in index.dat? Many Thanks, Michel van Geffen Student at the Avans University of Professional Education Tag: How to get IrSIR work? Tag: 112909
  - 7
    - MPEG-2 Demux filter for wince 6.0 Hi All, Could anybody please point to the location of 'MPEG-2 Demux for wince 6.0' . I searched in MSDN code gallery but without any hit. Thanks and Regards, dev Tag: How to get IrSIR work? Tag: 112908
  - 8
    - Keyboard is not detected in WINCE 6.0 Hi all, I am working in PXA270 processor on WINCE 6.0. My USB mouse get detected and it works properly but USB keyboard not detected. When USB keyboard inserted in to USB port, first time it blinks but after that it not giving any response on image but on terminal i got messages when any key press. Is this KEYBOARD detection problem is already in WINCE 6.0? I have added USB Function Driver USB Host Support USB Human Input Device (HID) Driver USB HID Keyboard and Mouse only USB HID Keyboard only USB HID Mouse only Catalog item from Core OS in my image. Is any catalog item is missing? Thanks in advance Swapnil Tag: How to get IrSIR work? Tag: 112902
  - 9
    - Stupid question about adding an application to an OS design Hi All, I have a stupid question about adding an application to my OS design in WCE 6.0. I made an OS design by using most of the default values. Now I simply want to add a "Hello World" application to this OS design and then debug it. What I have done so far is: - I started a new OS design project. Chose my settings and built the solution. I downloaded the image to the target device and it worked. - Then I created a new subproject and set it as a simple "Hello World" application. I only changed the code part to write "hello world" 3 times on the screen. - I chose "Build All Subprojects" from the Build menu. No errors. - When I tried to place a breakpoint on the MyHello.cpp file, the breakpoint symbol is a red circle with an exclamation symbol in it (I guess showing that it could not be instantiated) - I rebuilt the solution (assuming that this will put the application into the image) - I ran viewbin tool ("viewbin -toc nk.bin") and verified that MyHello.exe is in the modules section of the image file in the FLATRELEASEDIR. - I downloaded the image again to run & debug the application. And... - No MyHello.exe under windows directory of the target device!!! - If I explicitly write in the project.bib file the path of the application file on my host pc (MyHello.exe "D:\something\MyHello.exe" NK), then I can see the file under windows directory of the target device. And unfortunately I can't use Remote Tools or Run Program from the Target menu. The connectivity settings only show Default CE Device and I cannot connect to this device. (I'm using phyCORE i.MX31 with WinCE SDK, so I'm using their bootloader and I don't know what's exactly in it yet). I also wathed Mike Hall's tutorial "Introdution To Platform Builder With CE6 Beta" which simply shows the OS design and subproject creation as I did. I had experience with WCE 4.X before, but getting VS environment and WCE6.0 modifications has driven me crazy this week. I will really appreciate any kind of help here. Thanks in advance. Selin selinATheitec Tag: How to get IrSIR work? Tag: 112901
  - 10
    - Non-working of SanDisk USB Cruzer Drive with U3 Smart Technology Dear All, Test Setup: 1. TI's DM6446 Based Hardware Board 2. Board acting as USB Host 3. WinCE 5.0 and WinCE 6.0 (with all the latest updates applied) 4. Testing with different type of Mass Storage Disk Pre-requisite: The system is able to detect different USB based Mass Storage devices (Kingston, Sony, Toshiba, Transcend, and SanDisk w/o U3 Technology). Also I am able to do all the operations on the USB device without any issue. All the devices work fine on system wake-up after it is put in suspend mode. Problem: I am facing issue only with SanDisk USB Cruzer Disk with U3 Smart Technology enabled. Initially this device was not getting detected when attached. On further debugging we found that device was continuously returning STALL for the Medium Identification Command. Then we modified USB Mass Storage Class driver in WinCE 5.0 to jump this particular command and found device to be working fine. Now we are facing another issue. When the SanDisk device (with U3 Technology) is connected and working fine, we put the system in Suspend mode. Now on wake-up the device does not work. When we try to click on Device Manager or open Explorer window, USB device is also not seen. On further debugging we observed that device response to Resume command from Host Controller was getting delayed. So we put some fix in USB Host Controller for Resume command that is unless we get response to Resume command no other command request from Mass Storage client driver will be passed to the device. But after this we observe that device responds with ACK for Resume command but does not respond to Signature command. We are unable to find any reason behind this. The above problem is only observed with SanDisk USB Cruzer Drive with U3 Smart Technology. This does not happen with SanDisk USB driver without U3 Technology. We also tried to remove the U3 Technology from the SanDisk drive but no improvement was observed. The other observation was that when we connect the SanDisk USB Cruzer Drive with U3 Smart Technology on PC and check its properties through Disk Management, it shows Partition Style as Not Applicable (in Volume Tab). But other normal USB drives show that as Master Boot Record. I am not sure whether this has some relation to the problem I am facing. I am not sure whether anyone has faced similar issues. Any help on this regard will be greatly appreciated. Regards, Ritesh Tag: How to get IrSIR work? Tag: 112895
  - 11
    - Activesync visibility Hi all I have implemented activesync on smdk2440 and I can browse files on my device from PC. But problem is that " Storage card and NAND Flash FAT partition both are visible on PC". I want that only storage card should be visible on PC. How this can be done? Thanks in advance. -- Message posted via http://www.pocketpcjunkies.com Tag: How to get IrSIR work? Tag: 112894
  - 12
    - Changing default Icon size -- neverending topic Hi I know that this topic has been discussed many times in this newsgroup. I also read the answers, but they did not statisfy me (if there was any answer at all). So let me explain what i want to do: I try to change the size of the "flying windows" icon which is located at the left bottom in the task bar. In the source file \PUBLIC\SHELL\OAK\HPC\EXPLORER\TASKBAR\taskbar.cpp it is hard coded to the size of 16 pixels in the call LoadImage(). So I can clone the shell and modify it. But hey: I don't wanna do this for all the Icons. I think there must be another way of doing this. According to the posts, I'm not the only one who struggles with that problem. Does anybody else encountered this problem (and solved it ;-) ). Tag: How to get IrSIR work? Tag: 112891
  - 13
    - DDEX1 app giving error(DirectDraw on WinCe6.0) Hi All, When I am running the ddex1.exe on WinCE6.0 (CEPC) I am getting the following error and on the display black screen comes and disappears. My display driver is GPE based and directdraw driver is based on DDHAL. Directdraw apps used to run O.K. on WinCe 5.0. I am migrating now on WinCE6.0. Is there any changes in DirectDraw for WinCE 6.0? Is there any usermode -kernelmode issue here? Error: 4294847715 PID:32e0002 TID:32f0002 GWES Hook fails device creation. DirectDrawCreate fails. 4294847731 PID:32e0002 TID:32f0002 DDEX1: DirectDrawCreate FAILED 4294847798 PID:400002 TID:32f0002 DeleteFromProcessInputLocaleTable: Deleted process from ProcessInputLocale table, hProcess: 0x032E0002 4294847798 PID:32e0002 TID:32f0002 OSAXST1: <<< Unloading Module 'ddraw.dll' (0x8845D8A8) at address 0x404B0000-0x404C6000 in Process 'ddex1.exe' (0x8841E000) Hoping for your reply. Thanks a lot Vikas Patil Tag: How to get IrSIR work? Tag: 112890
  - 14
    - Changing default Icon size -- neverending topic Hi I know that this topic has been discussed (or at least started) in this forum many times. So i read all the posts, but either there was no answer or it was not statisfying. Lets make an excample: if i want to change the size of the "flying windows" icon which appears at the left bottom in the taskbar, i can do this by editing the code (or creating a clone and then edit it, of course;-) ) in the file \PUBLIC\SHELL\OAK\HPC\EXPLORER\TASKBAR \taskbar.cpp and change there the size in the function LoadImage(). But hey, i don't wanna do this for every single Icon!!!! I think there must be an other way to do this. Does anybody have experience with it? Tag: How to get IrSIR work? Tag: 112886
  - 15
    - Link error - OEMInterruptMask, OEMInterruptDone, OEMInterruptDisable, Hi All im using DAVINCI based DM644x DVEVM wince 5 BSP. I have migrated this BSP to wince6 And now im trying to build OAL it gives me following linking errors - BUILD: [01:0000000048:PROGC ] Linking D:\WINCE600\platform\DAVINCI \target\ARMV4I\debug\oal.exe BUILD: [01:0000000064:ERRORE] oemmain.lib(oemglobal.obj) : error LNK2001: unresolved external symbol OEMInterruptMask BUILD: [01:0000000065:ERRORE] oemmain.lib(oemglobal.obj) : error LNK2001: unresolved external symbol OEMInterruptDone BUILD: [01:0000000066:ERRORE] oemmain.lib(oemglobal.obj) : error LNK2001: unresolved external symbol OEMInterruptDisable BUILD: [01:0000000067:ERRORE] oemmain.lib(oemglobal.obj) : error LNK2001: unresolved external symbol OEMInterruptEnable BUILD: [01:0000000068:ERRORE] oal_timer_davinci.lib(timer.obj) : error LNK2001: unresolved external symbol OEMInterruptEnable BUILD: [01:0000000069:ERRORE] D:\WINCE600\platform\DAVINCI\target \ARMV4I\debug\oal.exe : fatal error LNK1120: 4 unresolved externals I have added NkStub.lib in the sources about - OEMInterruptDone, OEMInterruptDisable, OEMInterruptEnable these function are in nkintr.h (nk.lib) but i dont see any nk.lib in WinCE6. i though it changed to NkStub.lib. and as mentioned i have this lib already in the sources. Can anyone help me to solve this link error.. Thanks in advance, Vinod Tag: How to get IrSIR work? Tag: 112883
  - 16
    - CDC / David Liao blog Hi, David Liao writes: "No, there is no USB function client driver support fors CDC-ACM directly. But, we have USB Function Serial driver which can support USB Modem (recogonized by XP and load USBSer.sys). This driver is very close to CDC-ACM and you can use it as example." "USB Function Serial driver" is this the one in : C:\wince600\PUBLIC\COMMON\OAK\DRIVERS\USBFN\CLASS\SERIAL ? What does he mean by "very close" ? Any practical tips on turning this driver into a CDC driver ? Greetings, Rob van den Bergh Tag: How to get IrSIR work? Tag: 112882
  - 17
    - ceddk.lib not being built in PUBLIC\COMMON\OAK folder Hi, I am not able to build the CEDDK.lib file in the "WINCE600\PUBLIC \COMMON\SDK\LIB\$(_CPUINDPATH)\" path. I have included both the "Device Manager" & "WinCE driver developmenet kit support library" components in my OS design. At present I am linking my driver to the ceddk.lib present in "$ (_COMMONSDKROOT)\lib\$(_CPUINDPATH)\ceddk.lib" folder (the folder path that contains my OS design). Is it that the ceddk.lib does not get created in the "..\PUBLIC\COMMON \SDK\LIB" folder in Windows CE 6.0 ? Rgds, Vijay r Tag: How to get IrSIR work? Tag: 112878
  - 18
    - Adding support for CryptAcquiteContext I'm trying to use CryptAcquireContext() on my device (WinCE 5.00, ARMV4I) but every provider I try (e.g. PROV_RSA_FULL) comes back with the error NTE_PROV_TYPE_NOT_DEF. I've got SYSGEN_CRYPTO and SYSGEN_CERTS defined but I can't see any other components that would obviously support a particular provider. I don't care particularly which provider I use - I'm just trying to either hash a file or encrypt some data so a PC application can detect whether it's been modified or decrypt it using standard Windows functions. Thanks for any help. Tag: How to get IrSIR work? Tag: 112871
  - 19
    - Chinese font problem in Wince 5.0 Hi All I want to add Traditional chinese fonts in my OS image. My ROM size setting is approximately 18MB. The components which I need fit in this size, but when I add Chinese font, the PB gives error " the NK size exceeds ROM size". The reported size is about 26 MB. How can I fix this error? Thanks in advance. -- Message posted via http://www.pocketpcjunkies.com Tag: How to get IrSIR work? Tag: 112868
  - 20
    - Will DrawText produce memory leak in some state? I find DrawText function maybe produce memory leak, The codes are like following: void showString (CDC * pDC, FIFL *fp ,LPRECT _lpRect) { char temp[60]; TCHAR _str[256]; fread (temp, 1 ,60, fp); MultiByteToWideChar(CP_ACP, WC_COMPOSITECHECK, temp, 60, _str, 256); pDC->DrawText(_str, lpRect, DT_VCENTER | DT_CENTER); // this statement lead to memory leak } The string contains chinese characters which was read from a ASCII text file. Everytime I call this funtion ,there will be a memory leak. If I just did not call the DrawText function, then No memory leak occured. Will DrawText produce memory leak in some state? Thanks! Tag: How to get IrSIR work? Tag: 112859
  - 21
    - ASP server-side reading UTF-8 XML file on WinCE 6 Hi, I have an ASP page hosted on an embedded system running WindowsCE 6. When this page is parsed on the server, an xml file containing UTF-8 non-English characters (e.g. Arabic, Hebrew) should be read and displayed on the browser. The problem is that instead of getting the correct text, I get a series of question marks. I used new ActiveXObject("Microsoft.xmlDOM"). And if I use the same ActiveX to read the xml on the client side (desktop Windows), there's no problem. Here's the sample ASP file that is hosted on my embedded device (WinCE 6). The ASP page itself does not contain UTF-8 characters in it: <%Response.Charset="utf-8"%> <%@ language="JavaScript" %> <html> <% function loadxmlASP(xmlfile) { var xmlDoc = new ActiveXObject("Microsoft.xmlDOM"); xmlDoc.async="false"; xmlDoc.load(xmlfile); Response.Write(xmlDoc.parseError.errorCode); return xmlDoc.documentElement.childNodes(0).text; } %> <script> function loadxml(xmlfile) { var xmlDoc = new ActiveXObject("Microsoft.xmlDOM"); xmlDoc.async="false"; xmlDoc.load(xmlfile); return xmlDoc.documentElement.childNodes(0).text; } </script> <body> <% Response.Write("text.xml")); %> <br> <script> document.write(loadxml("text.xml")); </script> </body> </html> Tag: How to get IrSIR work? Tag: 112857
  - 22
    - Windows CE 5.0 Update 080420_2008M04 The documentation for the April 2008 QFE set for CE 5.0 seems like its incomplete. It has only one component listed as fixed under 080430_KBKB951302 with no description. (Note the double KB's) Is there a more complete or better description file ? Tag: How to get IrSIR work? Tag: 112848
  - 23
    - Using Raw Binary Partition in NAND Flash Hi all I want to create a small binary partition in nand flash on smdk2440. My intention is to store some parameters from my application running under wince 5.0 and read them in my bootloader. The question is, " How can I use FMD to directly read/write a binary partition in wince application?" Many thanks in advance. -- Message posted via PocketPCJunkies.com http://www.pocketpcjunkies.com/Uwe/Forums.aspx/wince-pb/200805/1 Tag: How to get IrSIR work? Tag: 112847
  - 24
    - ActiveSync disconnects automatically Hi, I have a strange behavior with my serial ActiveSync connection. After approximately 60 minutes ActiveSync disconnects automatically! I am using WinXP and WinCE6.0 on an GeodeLX800 x86 device. Is there a registry key to configure this timeout? Is this maybe a security related issue? Regards Peter Tag: How to get IrSIR work? Tag: 112844
  - 25
    - Hive based registry problem... Hi all, I want to implement a hive-based registery model in my pxa255 board. So, i have done the following by referring to the platform builder documentations. 1) Added the catalog item, Hive based registery 2) Modified my platform.reg file as shown below, -------------------------------------------------------------------------- ; HIVE BOOT SECTION [HKEY_LOCAL_MACHINE\init\BootVars] "SYSTEMHIVE"="System.hv" "Start DevMgr"=dword:1 "DefaultUser"="Ramesh" -------> I included my storage Manager driver registery details too here(I am using stratad...and my storage Manager is working properly and i am able to see the partition named "Flash" [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\StrataFMD] "Flags"=dword:1000 ; For the driver to loade at first boot phase [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash\FATFS] "MountFlags"=dword:2 ----------------------------------------------------------------------- I think, i have included all the details properly in my platform.reg. I done my sysgen properly(i could see default.hv, boot.hv etc in my release directory), Now, when my board boots, i get the following debug messages, -------------------------------------------------------------------------- Loaded symbols for 'D:\MYWORK\WINCE5.0_OS_DESIGNS\INNOVATE255_MYDEBUG5\RELDIR\INNOVATE255_ARMV4I_DEBUG\FILESYS.EXE' 4294767421 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: CertMod.dll not found, using old OEM Trust Model 4294767424 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: FileSystem Starting - starting with clean file system 4294767426 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: FS: initializing ROM/RAM file system 4294767427 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: SC_CreateAPIHandle: pvData == NULL 4294767428 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: FS: Registering file system ROM, index 2, flags 0x00000031 4294767428 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: FS: Mount complete (ROM, index 2, flags 0x00000031) 4294767433 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: InitSharedHeap: 46000000 10000 c 4294767434 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: InitSharedHeap: return 46000060 4294767437 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: FSREG: Unable to read value "NoDefaultUser" under HKEY_LOCAL_MACHINE\init\BootVars 4294767437 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: FSREG: Logging in default user. 4294767438 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: FSREG: Unable to read value "DefaultUser" under HKEY_LOCAL_MACHINE\init\BootVars 4294767439 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: SetCurrentUser: Logging out (nobody), logging in default 4294767439 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: FS: Using default path "\profiles\" 4294767440 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: BuildPath: profiles 4294767441 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: BuildPath: profiles\default 4294767442 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: SetCurrentUser: User hives not supported -- using same registry for all users 4294767444 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: FS: Using default path "Windows\" 4294767474 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: FS: Using default path "Windows\" 4294767480 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: FSREG: Unable to read value "DBFlags" under HKEY_LOCAL_MACHINE\init\BootVars 4294767513 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: Initializing Database 4294767523 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: DB:Validation: Name already exists DB_notify_events 4294767524 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: DB:CeCreateDatabase failed 4294767525 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: Filesystem initialized! 4294767526 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: FILESYS: Waiting for kernel to be ready to launch apps 4294767527 PID:3cb7002 TID:43ca2fba 0x83c9e400: InitMUI: DISABLED (-1039795432) 4294767529 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: FS: HKLM\System\Events not available, no signal events created. 4294767530 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: FILESYS: Launching apps 4294767530 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: ERROR: c:\macallan\private\winceos\coreos\filesys\main\fsmain.c line 4101: 4294767531 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: Unable to locate init key for starting apps! 4294767532 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: FILESYS: Done launching apps 4294767532 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: This device has booted 1 times !!! ----------------------------------------------------------------------------- I tried giving the "NoDefualtUser" parameter in my platform.reg, irrespective of what ever i change in my platform.reg and rebuild it(I rebuilded properly, i can see my changes in reginit.ini), i am getting the same error... Unable to read the "NoDefaultUser", although this is not serious error compared to the subsequent one, i want to know whether my changes are getting reflected at runtime... What mistake am i doing here and how do i store my hive based registry in my flash? Please help me up in solving this issue... Thanks in advance. -- Ramesh.c Innovate Sofware Solutions. Bangalore. Tag: How to get IrSIR work? Tag: 112838

Hi:

how to get IrSIR work im our BSP and test it?
we have IrCOMM.dll
IrSIR.dll
and
set SYSGEN_IRDA=1

is it enough for IrSIR work?

or need something?

and how to test it?

if anybody can tell us.

i m very appreciated.

and best Regards.

vincent tsai

Top