Intel Atom BSP?

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - WinCE5 Bluetooth radio BC6 from CSR Hi, does anybody have experience using the BC6 radio from CSR? I heard you need a special dll to configure the internal ram, since it is a rom device. Also I'm also curious with what CE drivers it works trough the UART. -- Maarten Tag: Intel Atom BSP? Tag: 112544
  - 2
    - WinCE5 Bluetooth over USB Hi, I want to use a Free2move Bluetooth module that can be connected by USB (USB HCI). Main function will be serving an audio headset. Does anybody know what driver I should add and what components have to be added to control the bluetoothmodem (e.g. audio) from the control panel? BTW. the free2move module uses a BC4 from CSR inside Thanks in advance -- Maarten Tag: Intel Atom BSP? Tag: 112543
  - 3
    - how kill taskbar? How kill taskbar? Tag: Intel Atom BSP? Tag: 112541
  - 4
    - [WINCE5.0] visual studio go to "int 3" Hi On x86 target i debug by ethernet with visual studio 2005 and debugger go on window "machin code" line "int 3". I can continu without pb (go button). what use of "int 3" (i think debug)? It seems it's a crash, because without the debugger the target crash? Any idea thk Tag: Intel Atom BSP? Tag: 112537
  - 5
    - repllog failing I'm having trouble with repllog on a semi-headless unit. It sends out "CLIENT" on the proper COM port @ 19200 as it's supposed to, but I don't get a response for an ActiveSync client. Am I missing something based on the error messages? Thanks, Joel 0x8ff39400: RLOG: [0x2FD73ECA] Started with cmdline: 0x8ff39400: AddToProcessInputLocaleTable: Added process to ProcessInputLocale table, hProcess = 0x2FD7376A0 x8ff39400: RLOG: [0x2FD73ECA] Using '`Desktop @ 19200`' connection 0x8ff39400: RLOG: [0x2FD73ECA] Welcome to repllog. Port in use: Dccman: 5679; RRA: 5678 0x8ff39400: RLOG: [0x2FD73ECA] WM_WINDOWREADY 0x8ff39400: RLOG: [0x2FD73ECA] About to run rapisrv.exe 0x8fd73c94: AddToProcessInputLocaleTable: Added process to ProcessInputLocale table, hProcess = 0x2FE29DC2 0x8fd73c94: +OEMIoControl(0x1010004, 0x1203fb54, 4, 0x1203fbe4, 520, 0x1203fb34) 0x8fd73c94: +OALIoCtlHalGetDeviceInfo(...) 0x8fd73c94: -OALIoCtlHalGetDeviceInfo(rc = 1) 0x8fd73c94: -OEMIoControl(rc = 1) RpcSrv: Rapi Server running on DeviceType: 2 0x8ff39400: RLOG: [0x2FD73ECA] Using '`Desktop @ 19200`' connection 0x8ff39400: RLOG: [0x2FD73ECA] About to run rnaapp.exe -n -m - e"`Desktop @ 19200`" RpcSrv: Winsock Started version 1.1 RpcSrv: Fail to create IPv6 socket. Error=10047 0x8fdada34: <RPC:RESLIST> 0x8fdada34: CResList::CResList() 0x8fd2c424: AddToProcessInputLocaleTable: Added process to ProcessInputLocale table, hProcess = 0x8FDB6CFE 0x8fedd000: AUTORAS:: Dialer notifies: [1] [Dialer Start] 0x8fee08d4: WaitCommEvent - Mask was cleared 0x8fee08d4: COM_Close: (1 handles) total RX 0, total TX 6, dropped (mdd, pdd) 0,0 0x8fee08d4: COM_Close: (0 handles) total RX 0, total TX 6, dropped (mdd, pdd) 0,0 0x8fd2c424: RASCS_Disconnected: Ecode=619 0x8fd2c424: DESTROY 0x8fd2c424: Posting WM_NETCONNECT(FALSE) message, ErrorCode = 619(0x26B) 0x8fd2c424: DeleteFromProcessInputLocaleTable: Deleted process from ProcessInputLocale table, hProcess: 0x8FDB6CFE 0x8ff39400: RLOG: [0x2FD73ECA] Received WM_NET CONNECT - 0, for '`Desktop @ 19200`'; fRnaAdrefed: 0 0x8ff39400: RLOG: [0x2FD73ECA] Received WM_NETCONNECT(FALSE) - haven't yet seen WM_NETCONNECT(TRUE). 0x8ff39400: RLOG: [0x2FD73ECA] Received 'silent' Rnaapp error 619 0x8ff39400: _REPLLOG: IDM_STOP_REPLICATION. wParam: 1, lParam: 0 0x8ff39400: RLOG: [0x2FD73ECA] Quiting replication. 0 0 0 0 1 0x8fedd000: AUTORAS:: Dialer notifies: [2] [Dialer Terminate] RpcSrv: Rapi Server received WM_STOP_RPC RpcSrv: Rapi Server received WM_DESTROY RpcSrv: Error from accept=10038 RpcSrv: select() failed, error 10038 0x8fdada34: <RPC:RESLIST> 0x8fdada34: CResList::~CResList() 0x8fd73c94: DeleteFromProcessInputLocaleTable: Deleted process from ProcessInputLocale table, hProcess: 0x2FE29DC2 0x8ff39400: RLOG: [0x2FD73ECA] Done quiting replication. 0 0 0 0 0x8ff39400: RLOG: [0x2FD73ECA] Quiting replication. 0 0 0 0 1 0x8ff39400: RLOG: [0x2FD73ECA] Done quiting replication. 0 0 0 0 0x8ff39400: RLOG: [0x2FD73ECA] ========== WinMain ends here. 0=========== 0x8ff39400: WARNING: Leaked registry key HKEY_CURRENT_USER\ \ControlPanel\Comm 0x8ff39400: WARNING: Leaked registry key HKEY_CURRENT_USER\ \ControlPanel\Comm 0x8ff39400: WARNING: Cleaned up 2 leaked registry handles for process 0x2FD7376A 0x8ff39400: DeleteFromProcessInputLocaleTable: Deleted process from ProcessInputLocale table, hProcess: 0x2FD7376A Tag: Intel Atom BSP? Tag: 112529
  - 6
    - Loading USB driver @ boot We have a system with two partitions, the NK.bin and an internal filesystem on the same NOR flash device. We have the need to load USB drivers from the internal filesystem. The reason being, our NK.bin is not upgradable but the filesystem is. So we have some ideas: * We use the Loader/SystemPath registry variable to point to the filesystem. This doesn't seem to work even though we put this entry in the boot registry. * We copy the USB driver files to the \WINDOWS directory after boot. The problem here is that we have a race condition between the copy and the USB driver loading. * Let the USB driver fail loading the first time, then retry after we boot up and copy driver files to \windows (is there a function to reload a driver?) Has anyone else had a similar problem? Thanks! Tag: Intel Atom BSP? Tag: 112518
  - 7
    - Watchdog PXA270 PB5.0 XSCALE PXA270 I'm trying to implement hw watchdog and from the documents, I have initialised match register and I'm resetting OCR0 register periodically. This works fine. But, when I allow watch dog reset to happen, my system hangs in bootloader itself. We are running a small RAM test even before eboot is copied to RAM from flash. The control is not even getting there after a watch dog reset ? From some posts I see that PXA270 watchdog requires HW modification ? Can you guys advise on how to solve the watch dog hang issue ? Thanks, Rishi Tag: Intel Atom BSP? Tag: 112517
  - 8
    - Windows CE 5.0 compilation crashes after installing rollup 2007 QFE Hi Microsoft Engineer, I updated my windows ce enviroment (platform builder) with the rollup 2007 package and after when I try to buid a new image I have a problem with kerberos module, same problem that http://groups.google.fr/group/microsoft.public.windowsce.platbuilder/browse_= thread/thread/d3d5cbd536df3626/5462f1f52148e08c?lnk=3Dgst&q=3DDsGetDcNameW#5= 462f1f52148e08c =2E..in the attached link (post of this forum) the user Michel Verhagen (eMVP) told that the only way to correct this problem is reinstall the platform buider, because in the rollup 2007 package there=B4s million strange errors and after install rollup 2007 package the developer can =B4t do a clean build and sysgen the windows ce enviroment, never more. Is there another way to solve this problem ? Regards Mauricio de Sousa Coelho Windows CE R&D Team www.connec.com.br Tag: Intel Atom BSP? Tag: 112516
  - 9
    - TOUCH CETK test fails in Windows mobile 6.0 Hello All, Am working on windows mobile 6.0 and my touch driver is working fine.. When touch CETK try to load my touch driver am facing foll. problem when CETK calls DdsiTouchPanelDisable function through touch MDD function,it couldnt able to close GPIO and SSP driver using closehandle since GPIO and SSP driver "handle" global variable's values are zero.(i.e GPIO and SSP drivers are opened when touch driver was loaded by GWES) How should i resolve this problem?How could i retain those GPIO and SSP global variable's values? Thanks in advance Regards senthil Tag: Intel Atom BSP? Tag: 112505
  - 10
    - RNDIS - USB pipes Hi I wondered if there are any requirements to the USB implementation if i would use RNDIS in my Windows CE device. What kind of USB pipes are used to communicate (interrupt, bulk,...)? Tag: Intel Atom BSP? Tag: 112504
  - 11
    - Porting BSP from CE 5.0 to 6.0 problem. Hi all, I am using Win CE 6.0. I am porting my one BSP from CE 5.0 to CE 6.0. I am getting interrupt errors. Is any body know when we port any BSP from CE5.0 to CE6.0 why this type problem occurs? Is any common solution for this? Thanks in advance Swapnil Tag: Intel Atom BSP? Tag: 112503
  - 12
    - User Mode and Kernel Mode question hi Are most CE driver kernel mode ? I'm confused about ISR and IST that IST run in user mode, is it part of kernel mode device driver ? Another question , is KernelIOControl an user mode or kernel mode function ? I see the document it can be used by driver or application . Thank for your teaching. Tag: Intel Atom BSP? Tag: 112502
  - 13
    - platform builder wince 6.0 Hi All, Im creating a BSP with the help of platform builder wince 6.0 evaluation version. The evaluation version is valid for 6 months . So would it meant that BSP build using the evaluation version stop working after 6 months or it is meant only for the IDE of the platform builder Thanks Tag: Intel Atom BSP? Tag: 112499
  - 14
    - WINCE as HID Hello All, I have a device, which runs WinCE OS. Currently, when I connect this device to PC (via USB), it gets recognized as vendor specific device. We communicate with the device using socket communication. Would it be possible to develop a piece of code to recognize this device as HID when it is connected to the PC? If so, any clues/ references on how to achieve this? Thanks in advance. Srinidhi. Tag: Intel Atom BSP? Tag: 112497
  - 15
    - File access error on 1GB CF card I used 512M kingston CF card with a geode board and it worked well. Last week we began to use 1GB CF card, OS is booting OK, but it reported "error 30" or "disk full", while writing file in an application. e.g. copying file in explorer.. what's wrong with it? Tag: Intel Atom BSP? Tag: 112491
  - 16
    - What is the file replacing *.plg which is used at WinCE5.0 in Hi, all gurus! I want to know about some configuration file. When I work with WinCE5.0, there is a file with *.plg extension. And with this file, I can analysis what modules have been included with this kernel file, NK.bin. But with Windows Embedded CE6.0, I couldn't find a file with an extension plg. What file has the information about NK.bin like *.plg file? If you know, please let me know. Thanx in advance!! Have a great day! Tag: Intel Atom BSP? Tag: 112482
  - 17
    - How to run GSPlayer on pocket PC Hi to all I download open source audio player (GSPlayer) from internet. i build it in visual studio by selecting "windows Mobile 5.0 Pocket PC sdk(ARMV4I)" Solution plateform and "release" as the solution configuration. It build successfully I try to connect to emulator and active sync it is connected successfully. But when i run to check its functionality it gives an error and stops. I check the out put directory it does not create any exe file rather only some .obj and .res files. I want to run it on device emulator to see its functionality. Can any body help and guide that how can i do this???? any help will be appreciated.......thanx -- Message posted via PocketPCJunkies.com http://www.pocketpcjunkies.com/Uwe/Forums.aspx/wince-pb/200805/1 Tag: Intel Atom BSP? Tag: 112476
  - 18
    - Unresolved CryptPFXDllMain (.NET CF 3.5) Hi all, I'm completely newbie with CE so excuse me if this is not the right place to ask such questions, any redirection welcomed. I created a new OSDesign project, with custom template, and did not checked anything offered (trying to keep the components at minimum). It builded okay. Than I've installed all x86 CE updates (up to april 08), and checked .NET Compact Framework 3.5 in the catalog list view items. Now the project doesn't want to build. The build.log ends with crypt32.def : error LNK2001: unresolved external symbol CryptPFXDllMain crypt32.def : error LNK2001: unresolved external symbol PFXExportCertStoreEx crypt32.def : error LNK2001: unresolved external symbol PFXImportCertStore crypt32.def : error LNK2001: unresolved external symbol PFXIsPFXBlob crypt32.def : error LNK2001: unresolved external symbol PFXVerifyPassword I've tried to check whole SYSGEN_CRYPTO group in the catalog, but this only added additional uneresolved symbol errors. So my first question is how could I fix this problem, but the real question I would like to ask is how can I find, seeing this kind of error, which SYSGEN am I missing? Thank you for any help, Jan Kucera Tag: Intel Atom BSP? Tag: 112469
  - 19
    - error SYSGEN0000: error(s) in sysgen phase Hi all VS2005 and Wince 6.0 using Errors 1-Catalog Id "StringTable:MS:Cepc:1033" duplicated in files "C:\WINCE600\platform\CEPC\catalog\1033\cepcstrings.pbcxml" and "C:\WINCE600\platform\VIAMARK\catalog\1033\cepcstrings.pbcxml" with equivalent version numbers. Ignoring second record (file "C:\WINCE600\platform\VIAMARK\catalog\1033\cepcstrings.pbcxml"). C:\WINCE600\platform\VIAMARK\catalog\1033\cepcstrings.pbcxml 2-Catalog Id "StringTable:MS:Cepc:1041" duplicated in files "C:\WINCE600\platform\CEPC\catalog\1041\cepcstrings.pbcxml" and "C:\WINCE600\platform\VIAMARK\catalog\1041\cepcstrings.pbcxml" with equivalent version numbers. Ignoring second record (file "C:\WINCE600\platform\VIAMARK\catalog\1041\cepcstrings.pbcxml"). C:\WINCE600\platform\VIAMARK\catalog\1041\cepcstrings.pbcxml 0 3- build.err file == C:\WINCE600\build.log(1) : error SYSGEN0000: error(s) in sysgen phase Warnings 4-BUILD: [00:0000000053:WARNS ] Directory: C:\WINCE600\public\ossvcs\oak\inc\ does not exist. as error(s) and warning(s) receiving!!! how to taking?? no speak english thank you Tag: Intel Atom BSP? Tag: 112463
  - 20
    - .NET Compact Framework dependencies Hello, I would like to build a minimal x86 image supporting the .NET Compact Framework (3.5). This component, however, has lot of dependencies. Is there any way of not including them all? Just let the .NET application throw an Exception if it wanted to use any of the components not included... Thanks, Jan Tag: Intel Atom BSP? Tag: 112461
  - 21
    - Windows CE 6.0 IXP425 ethernet driver problems Hi! We're using the OSDN_RICHFIELD BSP for IXP4xx under WinCE 6.0. We're having problems with ethernet deadlocks when running a CF3.5 application which communicates over ethernet. Sometimes the application can run for several days without any problems and sometimes the ehternet interface becomes unavaliable after less than a day. When the ethernet interface has dealocked the other ethernet interface still works properly. If you try to disable the deadlocked interface the entire OS hangs. Any ideas? Is there any other ethernet driver avaliable for IXP4xx running WinCE6.0 than the driver from the OSDN_RICHFIELD BSP? Is there no Windows CE support from Intel for the IXP4xx platform? Regards, Adam Tag: Intel Atom BSP? Tag: 112459
  - 22
    - Problem with WinCE 5.0 Detection of US Robotics USB 5421 I currently purchase a US Robotics USB Adapter to integrate with my WinCE 5.0 platform, but unfortunately the device is not recognized. The power light does not come on indicating that the device is never detected. I have and external HUB connect to my unit with a USB mouse and keyboard connected. The other devices are working fine, but I can't get the wireless USB 5421 adapter to work. I have read the other posts about modifying the OHCD driver to delay the detection of the USB 5421, but I don't know where inside the OHCD driver to implement these changes. One post indicates that the device should be detected as a full speed device, but where do I implement these changes. I have an customized BSquare BSP for AU1100 MIPS processor for the OHCD driver. If anyone has successfully integrated the USB 5421 device into their WinCE 5.0 platform, please post the modifications that had to be made inside of the OHCD driver. Tag: Intel Atom BSP? Tag: 112457
  - 23
    - File System in Wince 5... Hi all I am developing SD host driver , the driver will unload and reload client driver when system resume. Now I get a problem, that is while copy a file from SD card/flash to flash/SD card, then suspend and resume the system , the copy progress is not smooth, the progress will halt a few seconds(about 8s) , then continue copying. How can I do to smooth it ? Should I set up or miss something ? BR Jack Tag: Intel Atom BSP? Tag: 112455
  - 24
    - How to debug Hi Is there some good way or tool to debug Windows CE application and driver, which documents to refer ? How about Windows Mobile device , can we debug it the same as WinCE ? Thank you . Tag: Intel Atom BSP? Tag: 112453
  - 25
    - nand partition i have one nand flash on my device, i want to make this nand flash as two partitions, can any body help on the registry settings required for this and what are the modifications required in the nand fmd driver and i want to expose one of the partition as a mass storage device when connected to PC. Thanks Subbarao. Tag: Intel Atom BSP? Tag: 112450
- Next
  - 1
    - Delay in VoIP call for WinCE5.0 device Hi All, We are developing a MainstoneII based VoIP handheld device, on WinCE 5.0 with PXA 270 processor. On making VoIP call we are getting delay of 3 seconds. What can be possible reasons for this, whether any driver like ethernet cotroller can cause a delay. We are using SMSC 9118 ethernet controller.Plz help me in this. Thanks in advance Jipin Tag: Intel Atom BSP? Tag: 112448
  - 2
    - Win CE USB Mass Storage Class Driver Hello, We are using Win CE 5.0 USB host stack for the development purpose. We found that Win CE Host stack has a very low performance. We have done few modifications in the USB Mass Storage Class driver to enhance the speed of USB transfers in Host mode. WinCE Kernel USB Class Driver fixes - 1. Changed Max Transfer size from 8KB to 32KB. Result - Number of SCSI commands was reduced. 2. Removal of SCSI Test Unit Ready(TUR) Command during Read/Write operation. Result - Time taken by TUR Command is reduced during Read/Write operation. 3. WinCE Scatter-Gather Buffer changed from 8 to 128 (SG_MAX_BUF) Result - Disk I/O Delay is reduced by increasing the number of buffers Changes in MS WinCE Kernel system Memory 1. Memory Type changed to RAMdisk Result - RAMdisk access times are faster than WinCE system memory We need know, 1. Whether the above modifications will affect the stability of the Win CE kernel and system. 2. Will they have any detrimental affect on their internal kernel modules. Thanks in Advance, Sheeja Tag: Intel Atom BSP? Tag: 112435
  - 3
    - Audio channels volume is inverted...? Recently we faced this problem: 1)the 'waveOutSetVolume' documentation states that 'The low-order word [of 'DWORD dwVolume' parameter] contains the left-channel volume setting, and the high-order word contains the right-channel setting'. 2)AC97 codec registers for volume(s) are 16 bit: the LSB is the attenuation for the right channel, while the MSB is the attenuation for the left channel (actually only 5 bits out of 8 are used). Let's take a look to the low-level function which sets the volume in %_WINCEROOT%\..\DRIVERS\WAVEDEV\UNIFIED\ENSONIQ (comments are mine): **************************************************** CDriverContext::SetVolume (ULONG ulVolume) m_ulVolume = ulVolume; /* The '&' keeps only the higher 5 bits due to the AC97 register format. Then we 'justify' the data to the right */ USHORT usLeft = (USHORT) ((m_ulVolume & 0x0000F800) >> 11); USHORT usRight = (USHORT) ((m_ulVolume & 0xF8000000) >> 27); /* Since AC97 volume register represents the attenuation (i.e. 0 dB == MAX_VOLUME), we subtract the volume from 0x1F */ usLeft = 31 - usLeft; usRight = 31 - usRight; /* Here we build up the value to write in the AC97 register: NOTE that we are putting the RIGHT volume in the higher part of the word when we should put the LEFT volume, and viceversa */ USHORT usRegVal = (usRight << 8) | usLeft; /* Write data to the codec */ m_pDevice->WriteCodecRegister(AC97_PCMOUT_VOL, usRegVal); **************************************************** All the other audio drivers I've seen in WINCE600 (and previous version of the OS), although with slightly different semantics, seem to make the same mistake... Am I wrong or missing something...? -- Luca Calligaris www.eurotech.it Tag: Intel Atom BSP? Tag: 112432
  - 4
    - Serial Problem with USB I have the following problem with serial devices connected through USB. Situation: Windows CE 5.0 running on a PXA270. NET CF 2.0 (No SP) USB Devices connected through a USB HUB. 1 FTDI USB To Serial device. Other USB devices (Including serial devices, and Mass storage devices) Recognition of all the USB Devices work without problems. When i boot up with my FTDI Device attached, all works and i can open the serial port and communicate, But as soon as i attach an other Serial USB device the FTDI Serialport gives an error (I suspect the port gets closed). This only happens if i attach a Serial based device (A GPS Mouse, and Microsoft Wireless keyboard,mouse for example) the problem does not occur if i attach a Non Serial device like a Storage device. The problem also doesn't occur if i attach another FTDI Serial device. When i attach the Serial device and then bootup the device no problems occur aswell so the devices are all recognised, it's only the fact that if you attach the device after bootup, and when the other serialport has already been opened my problem occurs. For test purposes i removed all the drivers for the GPS Mouse in the registry, so whenever i attach the GPS Mouse it's not recognised as a valid device and displays the famous add driver dialog, but even then my serialport gives me an error although in theory i would think that nothing would happen. Could anyone shed some light on this issue. If you need more info about the settings in the registry i can post them, only didn't want to make this post to long Best Regards, mario Tag: Intel Atom BSP? Tag: 112429
  - 5
    - (Parallel Port) Why cannot output data to LPT port ? Dear Sir, I use WINCE 5.0/6.0 ro develop my project which have a parallel port. I reference http://support.microsoft.com/default.aspx?scid=kb;EN-US;823179 to develop a program to output data to LPT port. But system always cannot output data. Error Message : ========================== Open LPT port OK GetCommState OK SetCommState OK GetCommTimeouts OK SetCommState OK WriteFile OK WriteFile --> 0 Byte Do anyone have idea about this issue ? BR, Wiles The following is my source code. //---------------------------------------------------------- #include "stdafx.h" #include "resource.h" #include <windows.h> #include <stdio.h> #include <string.h> int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPTSTR lpCmdLine, int nCmdShow) { HANDLE hParallelPort = NULL;; DCB MyDCB; COMMTIMEOUTS MyCommTimeouts; char String_data = 'A'; DWORD BytesWritten = 0; DWORD dwRead = 0; char buf[] = "Test"; char new_buf[] = ""; RETAILMSG(1, (_T("==========================\r\n"))); // hParallelPort = CreateFile(TEXT("LPT1:"), GENERIC_READ Or GENERIC_WRITE, 0, 0, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, 0); hParallelPort = CreateFile(TEXT("LPT1:"),GENERIC_READ | GENERIC_WRITE, 0,NULL,OPEN_EXISTING,FILE_ATTRIBUTE_NORMAL,NULL); if(hParallelPort == NULL) { RETAILMSG(1, (_T("Open LPT port Fail\r\n"))); } else { RETAILMSG(1, (_T("Open LPT port OK\r\n"))); } if(!GetCommState(hParallelPort, &MyDCB)) { RETAILMSG(1, (_T("GetCommState Fail\r\n"))); } else { RETAILMSG(1, (_T("GetCommState OK\r\n"))); } MyDCB.BaudRate = 9600; MyDCB.ByteSize = 8; MyDCB.Parity = NOPARITY; MyDCB.StopBits = ONESTOPBIT ; if(!SetCommState(hParallelPort, &MyDCB)) { RETAILMSG(1, (_T("SetCommState Fail\r\n"))); } else { RETAILMSG(1, (_T("SetCommState OK\r\n"))); } if(!GetCommTimeouts(hParallelPort, &MyCommTimeouts)) { RETAILMSG(1, (_T("GetCommTimeouts Fail\r\n"))); } else { RETAILMSG(1, (_T("GetCommTimeouts OK\r\n"))); } MyCommTimeouts.ReadIntervalTimeout = 0; MyCommTimeouts.ReadTotalTimeoutConstant = 0; MyCommTimeouts.ReadTotalTimeoutMultiplier = 0; MyCommTimeouts.WriteTotalTimeoutConstant = 0; MyCommTimeouts.WriteTotalTimeoutMultiplier = 0; if(!SetCommTimeouts(hParallelPort, &MyCommTimeouts)) { RETAILMSG(1, (_T("SetCommState Fail\r\n"))); } else { RETAILMSG(1, (_T("SetCommState OK\r\n"))); } if(!WriteFile(hParallelPort, buf, strlen(buf), &BytesWritten, 0)) { RETAILMSG(1, (_T("WriteFile Fail\r\n"))); } else { RETAILMSG(1, (_T("WriteFile OK\r\n"))); } RETAILMSG(1, (_T("WriteFile --> %dByte\r\n"),BytesWritten)); CloseHandle(hParallelPort); return 0; } Tag: Intel Atom BSP? Tag: 112428
  - 6
    - Does CE 6.0 R2 new nandflash driver model support IOCTL_DISK_READ ?? hi,all, Firstly, my new nandflash driver seems working well, and I could access nand in device explorer by common file operation method. In one of my app,I need access nandflash by DeviceIoControl. But when I sent IOCTL_DISK_READ to nand store handle,it always complained invalid parameter. While i sent the same parameters to SD or my old flash driver, it could work correctly. MS said they provided flashmdd.dll, flashpart.dll to manage flash device, and there is no source code for traceing. I am confused deeply. #define USESTORE 1 int _tmain(int argc, TCHAR *argv[], TCHAR *envp[]) { DWORD dwError; BOOL fResult; DWORD dwBytesReturned; //open store of nandflash _tcscpy(g_szDeviceName,_T("DSK1:")); //-->DSK1: for nand, DSK2 for SD #if USESTORE g_hStore = OpenStore(g_szDeviceName); #else g_hStore = CreateFile(g_szDeviceName, GENERIC_READ | GENERIC_WRITE, FILE_SHARE_READ | FILE_SHARE_WRITE, NULL,OPEN_EXISTING, 0,NULL); #endif if ((g_hStore == NULL) || (g_hStore == INVALID_HANDLE_VALUE)) { dwError = GetLastError(); RETAILMSG(1, (_T( "Failed to open store %s; error = %u\r\n" ), g_szDeviceName, dwError)); goto EXIT; } RETAILMSG(1, (_T("Opened store %s\r\n"), g_szDeviceName)); //read disk info RETAILMSG(1,(_T("IOCTL_DISK_GETINFO =0x%X\r\n"),IOCTL_DISK_GETINFO)); // read disk information fResult = DeviceIoControl( g_hStore, IOCTL_DISK_GETINFO, NULL, 0, &g_diDiskInfo, sizeof(g_diDiskInfo), &dwBytesReturned, NULL); if (!fResult) { RETAILMSG(1,(_T("IOCTL_DISK_GETINFO Failed,GetLastError:0x%X\r\n"), GetLastError())); goto EXIT; } RETAILMSG(1, (_T("Get disk Info success %s\r\n"), g_szDeviceName)); DUMP_DISKINFO(g_diDiskInfo); //read sector PBYTE pBuffer = (PBYTE)LocalAlloc(LPTR, g_diDiskInfo.di_bytes_per_sect); if (pBuffer != NULL) { DWORD adwPFNs[512]; memset(adwPFNs, 0, sizeof(adwPFNs)); BOOL bLockRes = LockPages(pBuffer, g_diDiskInfo.di_bytes_per_sect, adwPFNs, LOCKFLAG_WRITE); if (bLockRes) { bLockRes = UnlockPages(pBuffer, g_diDiskInfo.di_bytes_per_sect); } SG_REQ sgReq; DWORD dwBytesReturned; sgReq.sr_start = 1; sgReq.sr_num_sec = 1; sgReq.sr_num_sg = 1; sgReq.sr_status = 0; sgReq.sr_callback = NULL; sgReq.sr_sglist[0].sb_buf = pBuffer; sgReq.sr_sglist[0].sb_len = g_diDiskInfo.di_bytes_per_sect; BOOL bResult = DeviceIoControl(g_hStore, IOCTL_DISK_READ, &sgReq, sizeof(SG_REQ), NULL, 0, &dwBytesReturned, NULL); if (!bResult) { RETAILMSG(1,(_T("IOCTL_DISK_READ Failed:0x%X\r\n"),GetLastError())); goto EXIT; } RETAILMSG(1,(_T("IOCTL_DISK_READ success...\r\n"))); } EXIT: if (pBuffer!=NULL) { LocalFree(pBuffer); } #if USESTORE #else CloseHandle(g_hStore); #endif return 0; } **************************** Debug info: Opened store DSK1: IOCTL_DISK_GETINFO =0x71C00 Get disk Info success DSK1: DSK1: bytes per sector = 2048 DSK1: cylinders = 884 DSK1: flags = 0x8 DSK1: heads = 1 DSK1: sectors = 128 DSK1: total sectors = 113152 !!DecodeAPI: invalid handle! (h = 0297000a, iApiSet = 00000002 'NONE', pActvProc ->dwId = 0297000a) ObjectCall: returning 8037cce4 IOCTL_DISK_READ Failed:0x57 ************************************ The IOCTL_DISK_GETINFO operation had passed correctly. Is there any hint? any help will be appreciated! Tag: Intel Atom BSP? Tag: 112425
  - 7
    - WinCE driver question .. Hi Are all Windows CE drivers user mode drivers, unlike PC Windows kernel mode drivers ? Do Windows CE drivers have IRQ level like PC Windows drivers ( hardware IRQ > Software IRQ ) ? Thank you . Tag: Intel Atom BSP? Tag: 112423
  - 8
    - USB Mass Storage-Usbmsfn.dll problem. Hi All, Right now my CE device is getting detected as a Mass Storage Device. I could see the drive as "USB Mass Storage Device D:" . But if i try to access, i could see only empty folder and when i view the properties, "Used Space" and "Free Space" are shown as 0 bytes. My platform USBFn driver is derived from pxa27x which is available in public folder. From my BSP platfrom i could get retail messages from pxa27x usbfn driver. But not from usbmsfn.dll which tells me that usbmsfn.dll is not at all getting loaded. I am not sure, what is causing usbmsfn.dll driver not to load? Please give me your inputs. Thanks Saravana Tag: Intel Atom BSP? Tag: 112409
  - 9
    - nand fmd driver, long boot time hello, I see my device read every single sector during boot, is it normal? does TFAT/FAT type, and the exist of a BINFS partition affect boot time? this is my reg setting [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\xs27xNand] "Profile"="FlashDisk" "Dll"="xs27xNand.dll" "Prefix"="DSK" "IClass"="{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" "FriendlyName"="XScale 27x Nand flash Driver" "Order"=dword:0 "Index"=dword:1 [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\FlashDisk] "DefaultFileSystem"="FATFS" "Name"="FlashDisk" "Folder"="FlashDisk" "MountHidden"=dword:0 "AutoMount"=dword:1 "AutoPart"=dword:1 "AutoFormat"=dword:1 [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\FlashDisk\FATFS] ; "FormatTfat"=dword:1 "EnableCache"=dword:1 Tag: Intel Atom BSP? Tag: 112407
  - 10
    - Windows CE 6.0 AlphaT9 Input Method Hi Since some features like the cellcore module moved from the Windows Mobile to the Windows Embedded CE 6.0 (R2), I wondered if there is also support for the AlphaT9 Input Method. I couldn't find any information about this. Thanks J. Tag: Intel Atom BSP? Tag: 112406
  - 11
    - PCI Express Support? In the CE 6.0 docs I am not seeing explicit support for PCI Express, is this correct? Will there be support for it in the future, and if so, when? Thanks. Tag: Intel Atom BSP? Tag: 112400
  - 12
    - WindowsCE 5.0 usb printing Hi, I'm trying to enable usb printing from Windows CE 5.0. I have managed to load the default usb printer class driver (usbprn.dll) and when printing from WordPad I can see my printer name "Deskjet 460" and port "LPT1:". But when i proceed to printing, I got this error: LPT_IOControl(0x160014, 0xe03eef4, 4, 0xe03eef8) LPT_IOControl(0x160014) : ERROR_NOT_SUPPORTED <LPT_IOControl:0 LPT_Close(0x50b50) The Io control code 0x160014 refers to IOCTL_PARALLEL_GET_ECP_REV_TRANS which is not supported by usbprn.dll. Is there anything that I missed here? Regards, Doan Tag: Intel Atom BSP? Tag: 112398
  - 13
    - NdisMInitializeWrapper Problem? Hi all, I am working on PXA270 processor I have taken Sample code of WLAN from \WINCE500\PRIVATE\WINCEOS\COMM\NDISMODS\LAN\PCX500 location. I have used it in my platform driver folder. I got one error when i downloaded image CODE==> DriverEntry( IN PDRIVER_OBJECT DriverObject, IN PUNICODE_STRING RegistryPath ) { NDIS_HANDLE NdisWrapperHandle=NULL; RETAILMSG (1, (TEXT("DriverEntry Initializing..\r\n"))); RETAILMSG (1, (TEXT("In NdisMInitializeWrapper\r\n"))); // Initialize the wrapper. NdisMInitializeWrapper( &NdisWrapperHandle, DriverObject, RegistryPath, NULL ); RETAILMSG (1, (TEXT("Out NdisMInitializeWrapper\r\n"))); } OUTPUT==> DriverEntry Initializing.. In NdisMInitializeWrapper Data Abort: Thread=87d33784 Proc=81906000 'device.exe' AKY=00000005 PC=03c314cc(ndis.dll+0x000114cc) RA=01e21224(pcx500.dll+0x00001224) BVA=06000000 FSR=00000007 I got first massage only "In NdisMInitializeWrapper" but not get secound one "Out NdisMInitializeWrapper". Is any body know whats the problem in 'NdisMInitializeWrapper' ? Thanks in advance Swapnil Tag: Intel Atom BSP? Tag: 112397
  - 14
    - when will ms release sdk for ce6? or there already is ? 3x Tag: Intel Atom BSP? Tag: 112391
  - 15
    - Storage Manager : Create 2 partitions Dear Professional Buddies, From the title shows us, We can create 2 partitions in 1 storage media deive, and we can see "HardDisk", "HardDisk2" directories under the Root directory. ( If we configured Flash driver registry with "Folder"="HardDisk" ). But I have a question, I searched all of the registry and I did not see where the "HardDisk" and "HardDisk2" configuration are. Because I want to create 2 partitions from registry setting, and so on, we will not need to do it from storage manager. Thanks for your HELP!! Tag: Intel Atom BSP? Tag: 112384
  - 16
    - The Turn-by-Turn map SDK Hi: I hope someone had some experience about the Turn-by-Turn map device, for example, Tom-Tom device. And please give me some advise. I need to find a vendor (software or hardware) to sell a Turn-by-Turn Mapping solution. The hardware platform is a X86 Windows CE platform. This platform is based on a CEPC, x86 platform. The volume of platform is about several hundreds device. So I hope, there is a vendor could sell a SDK, like map engine, GUI SDK implemented by C++ or .NET Compact Framework and run on the x86 Windows CE platform. So I could implement Turn-by-Turn mapping into or intergate the propritary product. Thanks Lu Tag: Intel Atom BSP? Tag: 112376
  - 17
    - Flash demo on EZPAD with CE 4.10? I wanted to run a flash demo (SWF file) on an EZPAD EP8402 running CE 4.10. I can't find a version of flash that I can install. Unsuccessfully tried fpc_ppc_en.cab. Is this going to be possible or should I give it up? Thanks ** Posted from http://www.teranews.com ** Tag: Intel Atom BSP? Tag: 112372
  - 18
    - How to write File system filter driver on Windows CE 5.0 Hi there, I am having USB Mass storage feature working on my target (Windows CE 5.0). Also I have boot partition and support for Hive based registry working. I have totally 3 partitions on my internal flash card. ( BINFS partition where in I have stored NK.bin and 1st DOS32 partition has been mounted as root and 2nd DOS32 partition is used for user data storage. I want to expose 2nd DOS32 parition as mass storage. (i.e. Selective partition exposure). Following post says there are couple of ways of doing it. One of them is writing file system filter. http://groups.google.co.in/group/microsoft.public.windowsce.platbuilder/browse_thread/thread/18759b99fcc05bf2/de2258cfaacf12c4?hl=en&lnk=st&q=Selective+partition+exposure#de2258cfaacf12c4 Is there any reference file system filter available in Windows CE 5.0? Any inputs will be helpful! Thanks in advance! Tag: Intel Atom BSP? Tag: 112371
  - 19
    - Error 4309 returned when writing files Hello, We have a WinCE 5.0 Core system running on a 1 Ghz x86 platform. The hard disk drive is set up as a CF card. Our program previously ran on WinCE 4.x with no problems, but now we repeatedly get errors when writing to the disk drive. GetLastError() returns 4309 (resource required). I suspect there is some security issue. We have the NoDefaultUser registry setting set to 0 by default. The platform was started from an internet appliance base and we have omitted all items we dont use in order to adhere to the core licensing agreement. We have no use for any "user" security. We need to be certain it is defeated, yet I haven't yet determine a successful solution. Any suggestions would be appreciated. Thanks, Ken Tag: Intel Atom BSP? Tag: 112361
  - 20
    - IRQ_BULVERDE_MAX CE 6.0 Question Hey all, I am porting a 270 based platform from CE 5.0 to CE 6.0 and have found a discrepancy with the defined value of IRQ_BULVERDE_MAX between the two versions. In CE 5.0 it is defined as follows... #define IRQ_BULVERDE_MAX IRQ_RTCALARM ...where IRQ_RTCALARM = 31. In CE 6.0 it is defined as follows... #define IRQ_BULVERDE_MAX 63 //icmr (32) + icmr2 (32) Is there a reason this was changed? I am defining additional platform specific IRQ values based off of the IRQ_BULVERDE_MAX value, but this paradigm is broken in CE 6.0 because the OALIntrStaticTranslate() routine (common lib, map.c) is comparing against the OAL_INTR_IRQ_MAXIMUM value which is defined as 64 for both versions. What this causes is the IRQ translation in CE 6.0 to be skipped because the compare fails, which in turn causes the SYSINTR to be mapped to the IRQ init value of -1 and then breaks IRQ dependent drivers. Obviously, I can manage to work around the issue, but I just wanted to get the reasoning behind the change to IRQ_BULVERDE_MAX. Tag: Intel Atom BSP? Tag: 112350
  - 21
    - how could i save files in windows folder? can i do it on ce5? or ce6? what's the solution? I know windows mobile can do it,3x Tag: Intel Atom BSP? Tag: 112347
  - 22
    - Compact Framework 3.5 CEC file for Windows CE 5.0 wanted Hello there, I would like to update my platform (Windows CE 5.0), but I'm missing the CEC file for Windows CE 5.0 platform builder. The only thing I found was: http://support.microsoft.com/kb/947560/ I've got a licensed Windows CE Platform Builder, a valid product key for "Windows CE 5.0 Pro" & we are producing Windows CE devices. How do I get hands on QFE updates like the Wincepb50-080115-kb947560-armv4i.msi? Thanks, Armin Sczuka Tag: Intel Atom BSP? Tag: 112344
  - 23
    - How to change the screen color? My platform is Windows CE 6.0. I want to change the screen color during Windows CE boot, the default color is black. Is it possible to do that? -- Regards, Goldbach Tag: Intel Atom BSP? Tag: 112334
  - 24
    - How to change the -- Regards, Goldbach Tag: Intel Atom BSP? Tag: 112333
  - 25
    - WinCE Graphics Hi, Can anyone explain me the basic display operations in Wince like BitBlt etc. Also can anyone tell me the benchmark values for time taken by a particular display driver operation like BitBlt, DrawText etc. I mean what should be the ideal time taken by Display Driver for a particular display operation eg. BitBlt. 1) Are these values documented some where? 2) Are these values platform dependent? Thanks in advance. Regards, Ram P Tag: Intel Atom BSP? Tag: 112332

Will Microsoft offer a CE 6.0 BSP for the Atom at some point?

Thanks.

Re: Intel Atom BSP? by Bruce

Bruce
Tue May 20 05:58:57 PDT 2008

For now, you probably need to rely on Intel for BSPs for Atom. If Microsoft
decides to support Atom, it probably won't be until the next major release
of Windows CE. I am just guessing on this though based on history.

--
Bruce Eitman (eMVP)
Senior Engineer
Bruce.Eitman AT EuroTech DOT com
My BLOG http://geekswithblogs.net/bruceeitman

EuroTech Inc.
www.EuroTech.com

"FoolBlah" <foolblah@discussions.microsoft.com> wrote in message
news:BC1CFCBB-F130-4A41-83BA-1DF800168728@microsoft.com...
> Will Microsoft offer a CE 6.0 BSP for the Atom at some point?
>
> Thanks.

Top

Re: Intel Atom BSP? by Silver

Silver
Tue May 20 10:03:41 PDT 2008

Did you see this?
http://connections.intel.com/kshowcase/view/view_item/7390c2ed710834a09c477d2ed22feb5bbd620c0b

Top