Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - problem with LMemDebug.dll in WM5.0 problem with LMemDebug.dll in WM5.0 I built LMemDebug.dll and copy it to release directory, but I found that system does not load Lmemdebug.dll for all the process but only system process like shell32.exe,gwes.exe,coldinit.exe. So how can I use LMemDebug to debug my own application? Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 89081
  - 2
    - Stuck in InitmemoryPool hi, CAn anybody pls help me into his. Till yesterday i was able to execute sucessfully till MDCreateThreaad, but from today morning itself my board behavior has been changed completely ie the o/p is totally different and now I am not even able to go till Scheduleinit and my code just get stops in InitMemoryPool with following message "InitMemoryPool: Init range: map=802d5000 start=802dd000 end=87fe0000" Actually I am not even able to get the following message in thelast line of code "InitMemoryPool done, free:____" I board confi is that It has ARM 926 EJS processor and I am using cloned MAINSTNE 2 BSP please do help me on this -- Thanks Honey Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 89078
  - 3
    - USB RNDIS KITL hangs This is a multi-part message in MIME format. ------=_NextPart_000_0049_01C6CAAA.7BD55F30 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi, I am trying to get the KITL to work through USB RNDIS on an Intel = Mainstone clone based on PXA270. The boot loader connects to the host = and downloads the WinCE image fine, but when the image boots and tries = to connect through KITL it hangs and I am not sure why. Here is the output from the serial debug log: --------------------------------------------- Windows CE Kernel for ARM (Thumb Enabled) Built on Jun 24 2004 at = 18:25:00 ProcessorType=3D0411 Revision=3D7 sp_abt=3Dffff5000 sp_irq=3Dffff2800 sp_undef=3Dffffc800 OEMAddressTable = =3D 9aa8d500 DeviceId................. MAINSTN61158 pArgs->flags............. 0x19 pArgs->devLoc.IfcType.... 0 pArgs->devLoc.LogicalLoc. 0x40600000 pArgs->devLoc.PhysicalLoc 0x40600000 pArgs->devLoc.Pin........ 0 pArgs->ip4address........ 10.1.2.3 pDevice->Name............ USB_RNDIS pDevice->ifcType......... 0 pDevice->id.............. 0x40600000 pDevice->resource........ 0 pDevice->type............ 2 pDevice->pDriver......... 0x80106490 HostMiniInit:: !! Rndis:: initialization: with addr=3DA8B00000 Rndis:: Address static map to addr=3D0 Rndis:: initialization! Rndis:: PDDInit Success! Rndis:: Get MAC address E000,998,E6EE RndisMdd:: PDD's max RX buffer =3D [8192] bytes. Rndis:: initialization: Success HostMini:: New filter set: [0x0] --> [0xB] HostMini:: New filter set: [0xB] --> [0x0] HostMini:: New filter set: [0x0] --> [0xB] KITL: *** Device Name MAINSTN61158 *** WARN: KITL will run in polling mode VBridge:: built on [Aug 25 2006] time [20:29:32] VBridgeInit()...TX =3D [16384] bytes -- Rx =3D [16384] bytes Tx buffer [0xA016B6E0] to [0xA016F6E0]. Rx buffer [0xA016F700] to [0xA0173700]. VBridge:: NK add MAC: [0-E0-98-9-EE-E6] KITL: Connected host IP: 10.1.2.1 Port: 4331 KITLGlobalState =3D=3D 0x61 ----------------------- And then I get only one line in the Platform Builder debug windows after = which it seems to hang. That line says something about a buffer being = initialized and that's all.=20 Does anyone have any idea or similar experience? Thanks a lot. George ------=_NextPart_000_0049_01C6CAAA.7BD55F30 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.2900.2912" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY> <DIV><FONT face=3D"Courier New" size=3D2>Hi,</FONT></DIV> <DIV><FONT face=3D"Courier New" size=3D2>I am trying to get the KITL to = work through=20 USB RNDIS on an Intel Mainstone clone based on PXA270. The boot = loader=20 connects to the host and downloads the WinCE image fine, but when the = image=20 boots and tries to connect through KITL it hangs and I am not sure=20 why.</FONT></DIV> <DIV><FONT face=3D"Courier New" size=3D2></FONT> </DIV> <DIV><FONT face=3D"Courier New" size=3D2>Here is the output from the = serial debug=20 log:</FONT></DIV> <DIV><FONT face=3D"Courier New"=20 size=3D2>---------------------------------------------</FONT></DIV> <DIV><FONT face=3D"Courier New" size=3D2>Windows CE Kernel for ARM = (Thumb Enabled)=20 Built on Jun 24 2004 at 18:25:00<BR>ProcessorType=3D0411 =20 Revision=3D7<BR>sp_abt=3Dffff5000 sp_irq=3Dffff2800 sp_undef=3Dffffc800 = OEMAddressTable=20 =3D 9aa8d500<BR>DeviceId.................=20 MAINSTN61158<BR>pArgs->flags.............=20 0x19<BR>pArgs->devLoc.IfcType.... 0<BR>pArgs->devLoc.LogicalLoc.=20 0x40600000<BR>pArgs->devLoc.PhysicalLoc=20 0x40600000<BR>pArgs->devLoc.Pin........ = 0<BR>pArgs->ip4address........=20 10.1.2.3<BR>pDevice->Name............=20 USB_RNDIS<BR>pDevice->ifcType......... = 0<BR>pDevice->id..............=20 0x40600000<BR>pDevice->resource........ = 0<BR>pDevice->type............=20 2<BR>pDevice->pDriver......... 0x80106490<BR>HostMiniInit:: = !!<BR>Rndis::=20 initialization: with addr=3DA8B00000<BR>Rndis:: Address static map to=20 addr=3D0<BR>Rndis:: initialization!<BR>Rndis:: PDDInit = Success!<BR>Rndis:: Get MAC=20 address E000,998,E6EE<BR>RndisMdd:: PDD's max RX buffer =3D [8192]=20 bytes.<BR>Rndis:: initialization: Success<BR>HostMini:: New filter set: = [0x0]=20 --> [0xB]<BR>HostMini:: New filter set: [0xB] --> = [0x0]<BR>HostMini:: New=20 filter set: [0x0] --> [0xB]<BR>KITL: *** Device Name MAINSTN61158=20 ***<BR>WARN: KITL will run in polling mode<BR>VBridge:: built on [Aug 25 = 2006]=20 time [20:29:32]<BR>VBridgeInit()...TX =3D [16384] bytes -- Rx =3D = [16384]=20 bytes<BR>Tx buffer [0xA016B6E0] to [0xA016F6E0].<BR>Rx buffer = [0xA016F700] to=20 [0xA0173700].<BR>VBridge:: NK add MAC: [0-E0-98-9-EE-E6]<BR>KITL: = Connected=20 host  IP: 10.1.2.1  Port: 4331<BR>KITLGlobalState =3D=3D = 0x61</FONT></DIV> <DIV><FONT face=3D"Courier New" = size=3D2>-----------------------</FONT></DIV> <DIV><FONT face=3D"Courier New" size=3D2></FONT> </DIV> <DIV><FONT face=3D"Courier New" size=3D2>And then I get only one line in = the=20 Platform Builder debug windows after which it seems to hang. That line = says=20 something about a buffer being initialized and that's all. </FONT></DIV> <DIV><FONT face=3D"Courier New" size=3D2></FONT> </DIV> <DIV><FONT face=3D"Courier New" size=3D2>Does anyone have any idea or = similar=20 experience?</FONT></DIV> <DIV><FONT face=3D"Courier New" size=3D2>Thanks a lot.</FONT></DIV> <DIV><FONT face=3D"Courier New" size=3D2>George</FONT></DIV> <DIV><FONT face=3D"Courier New" size=3D2></FONT> </DIV> <DIV><FONT face=3D"Courier New" = size=3D2></FONT> </DIV></BODY></HTML> ------=_NextPart_000_0049_01C6CAAA.7BD55F30-- Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 89072
  - 4
    - ActiveSync I have a problem to add the ActiveSync function to my CE system. I used the template Mobile Handheld in Platform Build which already inlcudes the ActiveSync feature. Then I added the BSP drivers for USB client and Host, network, etc. And the image is built successfully. The image workes fine except the ActiveSync function. My desktop PC can not connect the device. Does anyone have any idea of what I did wrong? Thanks. Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 89071
  - 5
    - ATADISK window mapping Can someone shed some light on this ? In the ATADISK sources for CE 4.x and 5.0, when calling GetATAWindows which maps the CF card's I/O addresses into virtual memory, the code adds a 'modifier' which is an offset based on the number of address lines the card reports it has for this configuration. For the typical case of 0x1F0-0x1F7,0x3F6-0x3F7, it reports ten address lines, so the driver maps addresses 0x5F0-0x5F7,0x7F6-0x7F7. This appears to generally work since most cards must only use the addresses they report, but a handful of cards don't. If 0x1F0-0x1F7,0x3F6-0x3F7 are used, those card work fine. CE 5.0 appears to have added an option to not use the 'modifier' and CE 3.0 didn't have it. I'm tempted to remove it from my 4.x/5.0 builds, but I don't understand why it was ever added in the first place. Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 89069
  - 6
    - CF on PXA270 under WINCE4.1 Hangs when Card Removed Hello All, I have seen a rather strange problem and am wondering if anyone else out there has run into it. I am developing on a PXA270 under WINCE4.1. We use the PCMCIA slot to allow cusomters to download new software via a CF card. In the past, it has worked well, and really still does. However, there is one particular brand of memory card, that seems to work okay on insertion, but hangs the entire system, when removed. The display even goes black, almost like its going into suspend. Reinserting the card, causes everything to come back alive, right where it left off. I have at least a dozen different CF cards that do work, so of course my customer will insist on using this cheap one they found that does not. I am sure most of you out there constantly get hear the same arguement I do: "well it works on my desktop". Anyhow, not sure I will solve this other than to tell the customer tough luck by a different CF card. I did think it was odd behavior though and wondered if anyone had seen anything similar. Thanks! Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 89068
  - 7
    - OHCI IssueBulkTransfer problem We are running into a problem with IssueBulkTransfer on the OHCI stack when trying to talk with the TI TUSB3410 RS-232 to USB device under Windows Mobile 5.0. I do IssueBulkTransfer with USB_IN_TRANSER | USB_SHORT_TRANSFER_OK flags set. I get the first packet and all packets as long as the data keeps coming. As soon as the data pauses and I get a timeout on the IssueBulkTransfer I may or may not get the next packet. If I had received an even number of packets before the timeout I will not lose data. If I had received an odd number of packets before the timeout I will lose the first packet after the timeout. I am testing by connecting the RS-232 end of the device to a terminal emulator and I send a single character in each packet. This works under the UHCI stack on one of our other platforms. I am wondering if this is the same problem reported here earlier under the subject: "OHCI bug in CTransfer". That post ended saying the problem was fixed in CE6 Beta. I did a diff with the CE6 Beta OCHI code and so far I don't see anything obvious that would fix this problem. Any comments would be greatly appreciated. Tom Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 89067
  - 8
    - D3Dmref.dll Encounters Exception Hi, I am experimenting with D3Dmref.dll in order to find out if I am able to run the Direct3D applications. I hooked the D3Dmref.dll using a RemoteHook option in registry and ran the Driver Comparison test from CETK. The result as follows: vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv 18124123: D3DMQA: ShellProc(SPM_BEGIN_TEST, ...) called 18124141: BEGIN TEST: "(CullTest) D3DMCULL_NONE Test; X-Axis Rotation Step #2 ", Threads=1, Seed=4164 18124195: D3DMQA: Creating D3DM object. 18124360: D3DMQA: Getting adapter display mode 18124483: CertVerify: D3Dmref.dll trust = 2 18124527: D3DMQA: Creating Direct3D device 18124585: D3DMQA: Beginning ExecuteCullTest. 18124685: Data Abort: Thread=8bc21cb4 Proc=88027d10 'tux.exe' 18124703: AKY=00000801 PC=03fb2960(coredll.dll+0x00052960) RA=00e164d0(d3dmref.dll+0x000064d0) BVA=1819127e FSR=00000007 18124744: D3DMQA: ShellProc(SPM_EXCEPTION, ...) called 18124762: Exception occurred! 18124773: *** ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 18124796: *** EXCEPTION OCCURRED! 18124806: *** 18124810: *** Module: \d3dm_drivercomp.dll 18124825: *** Command Line: /c \ 18124835: *** Test Name: (CullTest) D3DMCULL_NONE Test; X-Axis Rotation Step #2 18124858: *** Test ID: 1 18124867: *** Message: 101 (TPM_EXECUTE) 18124881: *** 18124885: *** [0] Exception Code: 0xC0000005 (EXCEPTION_ACCESS_VIOLATION) 18124908: *** [0] Exception Flags: 0x00000000 18124923: *** [0] Exception Address: 0x03FB2960 18124938: *** [0] Number of parameters: 2 18124951: *** [0] Parameter #1: 0x00000001 18124965: *** [0] Parameter #2: 0x1819127E 18124980: *** 18124985: *** ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ I wonder why I am getting EXCEPTION_ACCESS_VIOLATION error or what are possible causes for this exception? Our driver passes all the DirectDraw CETK tests if it is relevant to this issue. Thanks in advance, PK Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 89061
  - 9
    - where can I find the stressutils.lib? Hi there, I want to custom a stress module, which need to link stressutils.lib. But where can I find it? Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 89048
  - 10
    - Confused of LPBYTE lpBuffer - variable error <bad ptr> Hello all! I've got a problem with the variable LPBYTE lpBuffer - Debug watch reports me that this variable has a bad ptr. Then it's the cause that I'm not able to get success with loading my file which I need to see in my dialog's edit-box. This is the problem part of my code: __________________________________________________________________________ HANDLE hFile; DWORD dwSize; DWORD dw; LPBYTE lpBuffer = NULL; lstrcpy(szSoubor, TEXT("\\temp\\test.txt")); hFile = CreateFile(szSoubor, GENERIC_READ, 0, NULL, OPEN_EXISTING, 0, NULL); if(hFile == INVALID_HANDLE_VALUE) return; dwSize = GetFileSize(hFile, NULL); lpBuffer = (LPBYTE)HeapAlloc(GetProcessHeap(), HEAP_GENERATE_EXCEPTIONS, dwSize+1); if(!ReadFile(hFile, lpBuffer, dwSize, &dw, NULL)){ CloseHandle(hFile); HeapFree(GetProcessHeap(), 0, lpBuffer); return; } CloseHandle(hFile); lpBuffer[dwSize] = 0; SetDlgItemText(hwndDlg, IDC_EDIT1, (LPCTSTR)lpBuffer); SetFocus(hwndDlg); return; ___________________________________________________________ Did I do something wrong or did I forget something? (I need the command <if(!ReadFile(...))> to get nonzero result.) Thank you very much for any help! Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 89047
  - 11
    - REPOST: July 06 QFE kb/922439 TCP sequence number My colleague and I have a question about the July 06 QFE release regarding" Windows CE 5.0 device may reject TCP packets when the TCP sequence numbers become too high", as described in this link http://support.microsoft.com/kb/922439. We are wondering what sequence number is considered too high that would caused the rejection? If you don't know the answer, maybe you can redirect our question to someone who may know? Many thanks for your help. --Bruce & Chungwen Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 89046
  - 12
    - ExceptionDispatch OAL hi, I my kernel code my system is hanging after displaying the message "ExceptionDispatch: pexi=c201fca4 Pc=00000000" I searched this msg and found it inthe func ExceptionDispatch( PCONTEXT pctx ) but could nt find as to who calls this func Can anybode tell me why and when this func is called waiting for a favorable reply -- Thanks Honey Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 89044
  - 13
    - DaVinci::Exception in KernelInit hi, i am currently into OAL development for ARM926 processor and i am suing CCS verson 3.2 (Code composer studio of Texas Instruments).I am facing a problem wherein my system HALTS when kernel code reaches the line "KSTKBASE(pTh) = (DWORD)lpStack;" in MDCreateThread(). I have found many post similar post concerning this halting when code reaches the above thread but nowhere I am able to get a workable solution. i am using a cloned BSP of MAINSTONE2 and during development I had kept a stub function for OEMDataAbortHandler. But on going through many messages of these group i made the function (OEMDataAbortHandler)to call DataAborthandler code whose defination in armstrap.s file. I also saw in one post where in a problem was faced by an person in the same line "KSTKBASE(pTh) = (DWORD)lpStack" which he says that maybe due to the debugger used. So also please let me know if my CCS debugger is created any problem, and if not how can i further continue please do help me into this as I am stuck into the code from atleast a week now thanks in advance Waiting for a favorable reply -- Thanks Honey Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 89042
  - 14
    - audio can NOT work after resume Dear Sir, I use PXA27X , WINCE 5.0 and Philips UCB1400 as audio chip to develop my project. In the normal usage, audo and touch function work well. But if user call suspend function when system play a audio or video file , then resume , I can NOT hear audio forever. but touch function work well. The following is my test. case-1: Step-1: press power button to turn on the product. Step-2: play a audio or video file. ==> it work well. Step-3: close windows media player Step-4: press power button to go into suspend. Step-5: prsss power button to resume system Step-6: play a audio or video file. ==> it work well. case-2: Step-1: press power button to turn on the product. Step-2: play a audio or video file. ==> it work well. Step-3: do NOT close windows media player Step-4: press power button to go into suspend when system still play audio or video Step-5: prsss power button to resume system Step-6: windows media player will play audio or video automatic , but we do NOT hear any audio. Do anyone have idea about this issue ? Beside , can UCB1400 support wavedev2 architecture ? BR, dirwdirw.tw Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 89039
  - 15
    - How to make "GetSystemPowerStatusEx" available? So far, I have made my batter driver, but I still cann't use "GetSystemPowerStatusEx" function in my application created by eMbedded Visual C++ 4.0 or Windows CE 5.0. But the compile error was different. In eVC, the error was as follows( I have include "Winbase.h" ): D:\My Designs\TestBattery\HelloCE.cpp(182) : error C2065: 'GetSystemPowerStatusEx2' : undeclared identifier But in Window CE 5.0 the error was: BUILD: [01:0000000021:ERRORE] d:\WINCE500\PBWorkspaces\sdk7a404\TestBatteryDriver\HelloCE.cpp(233) : error C3861: 'BatteryAPIGetSystemPowerStatusEx': identifier not found, even with argument-dependent lookup I have tested my battery driver and it worked fine. May be I haven't tell the system I have made the batter drver. So, can someone tell me how to make "GetSystemPowerStatusEx" available? Thanks. Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 89036
  - 16
    - AU1200 LCD Controller LG Display Dear Greats, We are using DBAu1200 reference platform with LB104S01-TL01 LVDS display connected. By modifying the display driver settings we are able to see the display. In the display we are able to see lot of flickering. This is due to improper configuration of display controller values. We need the specific parameter values from LG to support AMD Au1200 LCD controller. Find the below settings, that we configured (WINCE500\PLATFORM\Db1200\Drivers\Display\Au1200lcd\lcdgpe.cpp file) to bring up the display. ============================================================================ ================================================= { TEXT("800x600_TFT"), 800, 600, /* mode_screen */ LCD_SCREEN_SX_N(800) | LCD_SCREEN_SY_N(600), /* mode_horztiming */ LCD_HORZTIMING_HPW_N(12) | LCD_HORZTIMING_HND1_N(13) | LCD_HORZTIMING_HND2_N(2), /* mode_verttiming */ LCD_VERTTIMING_VPW_N(2) | LCD_VERTTIMING_VND1_N(2) | LCD_VERTTIMING_VND2_N(5) , /* mode_clkcontrol */ LCD_CLKCONTROL_PCD_N(1), /* mode_pwmdiv */ 0x8000063f, /* mode_pwmhi */ 0x03400000, /* mode_outmask */ 0x00fcfcfc, /* mode_fifoctrl */ 0x2f2f2f2f, /* mode_toyclksrc */ 0x00000004, /* mode_backlight */ 0x00000000, /* mode_auxpll */ 96/12, /* mode_bitmask */ &RGB565, }, ============================================================================ ================================================= We have set the below settings, referring LG LCD and Au1200 data sheet. 1. Screen resolution - 800x600 2. Horizontal Sync Pulse Width in Pixels. - 13 3. Horizontal Non Display Period 1 in Pixels. - 14 4. Horizontal Non Display Period 2 in Pixels. - 3 5. Vertical Sync Pulse Width in Lines - 3 6. Vertical Non Display Period 1 in Lines. - 3 7. Vertical Non Display Period 2 in Lines. - 6 8. Pixel Clock Divisor (PCD) - 1 9. Auxiliary PLL multiplier - 8 The DCLK clock for LG is ranging from 37 to 40 MHz, formula we refer was 1. Auxiliary PLL clock freq/(2 *(PCD+1) = (37 to 40) MHz 2. Auxiliary PLL clock freq = Auxillary PLL multiplier * 12 MHz (OSC Freq) We configured Auxiliary PLL clock freq as 96 MHz (12*8) and PCD as 1 to get 24 MHz as DCLK (Which is less than the minimum value 37). To match the 39-40 MHz required we increase the AuxPLL to 156, but this is moving display in to VGA mode, no screen is seen in the LVDS display. Not able to indentify the root cause of this. We are trying to verify the clocks physically, before that I thought of posting this information for some help. Kindly any can help us to solve the problem avkumar Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 89035
  - 17
    - Why my serial kitl could not connect PB 5.0? I want to use serial kitl to debug usb. I use ST for debug info and bt for kitl. But I only one port on board. Now I could not connect to PB. I can see the info use bus hound. The debug info can input to com1, and PB has send $EDBG,PPSH info to com1, but kitl could not connect PB? who can help me? My setting: BOOL InitKitlSerialArgs (OAL_KITL_ARGS *pKitlArgs) { pKitlArgs->flags = OAL_KITL_FLAGS_ENABLED | OAL_KITL_FLAGS_POLL/* |OAL_KITL_FLAGS_EXTNAME*/; //pKitlArgs->flags |= OAL_KITL_FLAGS_PASSIVE; pKitlArgs->devLoc.LogicalLoc = BULVERDE_BASE_REG_PA_BTUART; pKitlArgs->devLoc.Pin = OAL_INTR_IRQ_UNDEFINED; pKitlArgs->baudRate = CBR_115200; pKitlArgs->dataBits = DATABITS_8; pKitlArgs->parity = PARITY_NONE; pKitlArgs->stopBits = STOPBITS_10; g_kitlDevice.type = OAL_KITL_TYPE_SERIAL; g_kitlDevice.pDriver = (VOID*) GetPxaKitlSerialDriver(); return TRUE; } my pb setting: download:none Transport: serial com1 115200 debugger: KdStub Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 89029
  - 18
    - Can't install platform builder on Windows server 2003 Hi, My work machine uses Windows Server 2003 standard edition (SP1). When I tried to install Windows CE 5.0 Evaluation Version, from the Microsoft-supplied DVD, I got the message "Setup requires either Windows 2000 Service Pack 4 or Windows XP Service Pack 1 to be installed..." I already have (a bought version of) CE 4.2 etc. installed. Is there any workaround for this? - Shalom Crown Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 89025
  - 19
    - Missing explorer.exe, missing desktop Hi All, I think someone monkeyed with a platform that I haven't touched in a while. It was once working but now it does not. It boots to a blank screen. After a while I figured out that the platform isn't actually hanging, but the shell isn't loading explorer. What's stranger is that explorer.exe is nowhere to be found! It's not in \Windows on the device, and it's not in the release directory, either. The last part of my debug log looks like this (This is for CE4.2 by the way): Loaded symbols for 'C:\DEV\WINCE42\PUBLIC\M5\RELDIR\ADVANTECH_PCM9575DEBUG\COMMCTRL.DLL' 4294781885 PID:a3fb9e2a TID:63f4ca52 0x83ef9a48: +OpenIFConfig(Comm\VMINI1\Parms\TCPIP Handle 0x617FB44) 4294781885 PID:a3fb9e2a TID:63f4ca52 0x83ef9a48: Opened registry info for Comm\VMINI1\Parms\TCPIP 4294781885 PID:a3fb9e2a TID:63f4ca52 0x83ef9a48: -OpenIFConfig(Comm\VMINI1\Parms\TCPIP *Handle 0x617FB44, BOOL Ret: 1) 4294781885 PID:a3fb9e2a TID:63f4ca52 0x83ef9a48: *CloseIFConfig(Handle 0x99900) 4294781885 PID:a3fb9e2a TID:63f4ca52 0x83ef9a48: IPAddAddrComplete: IF D5FC0 ntecount 1, SAC 0 4294783933 PID:a3fb9e2a TID:e3ee8e82 0x83ee8ad0: DhcpWorkerThread: loop 1: WaitList is 0x0 4294783933 PID:a3fb9e2a TID:e3ee8e82 0x83ee8ad0: -DhcpWorkerThread: WaitList is 0x0 Even though the device boots to a blank screen, it's still active. I can start the command shell, but I just don't have a taskbar and desktop. Device, GWES, Filesys, Shell, etc. are all running. Short of turning on all debug zones for the shell, I can't think of anything else. Maybe there wasn't an explorer.exe in 4.2? Any ideas? TIA, Dan. Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 89023
  - 20
    - what is pTOC Hi all, I am bit confused on what is pTOC stands for and how it works. In the eboot source code KernelRelocate (pTOC) directly making use of the pTOC glaobal variable. But I could not find exactly who is initializing the variable (default it is set to (ROMHDR*) -1) or where it is down. Can anybody explain me how this variable is initialized and for what it is used for? Thanks in advance -- Jackson C P Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 89016
  - 21
    - Getting Started with Platform Builder and the Catalog I am a software developer, not a hardware developer. We are working on rolling out a new product that will be Windows CE based. I have been tasked with defining the image we will use. Resources will be tight, and we do not want the device to look like it is running CE, so I doubt any of the "standard" images will work. I am wondering what is the best way to become familiar with the Catalog items and how Plaform Builder works. Pat O Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 89002
  - 22
    - What is up with CIFS? Hello all, Here is a line in the Platorm Builder help for both Windows CE 4.2 & 5.0 "The only network provider currently supported by Windows CE is the Microsoft Windows Network." Am I to assume that Windows CE does NOT support connection to UNIX or Linux boxes via SMB./CIFS? If that is true then how would anyone expect interoperability over the internet? If this is true does anyone know when or if it will be supported in 4.2 or 5.0? Thanks! Gary Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 89001
  - 23
    - Can I use PB to build the btscosnd driver and download it onto my SPV C600 Hi, I'm trying to build the btscosnd driver, I built it using VS2005, but can seem to get the SPV to load it at boot-up. I think this is the case because although I put the dll in \windows directory and appropriate entries in the registry HKLM\Drivers\Builtin\BTScoSnd etc I get no entry in HKLM\Drivers\Active to say that the driver has been loaded. I'd like to use PB to this work, but I wasn't certain I could use PB if I was not downloading the complete kernel to the device (in this case my SPV) Any advice ? Cheers Paul Grant Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 88995
  - 24
    - KITL not Working Hai Greats, HW : AMD DBAu1200 (MIPS Platform) SW : Windows CE 5.0. Problem: Windows CE Image built with KITL support and Target Control (shell.exe). Image is downloaded to the target through Platform builder with Ethernet transport enabled in the connectivity options. After download, while booting, the device is not getting connected with the Platform builder that is KITL Operating in Active mode. And the PB is waiting to connect with KITL Transport, but it is not occuring. So, what could be the problem. Yours, Arun. Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 88994
  - 25
    - SCardGetStatusChange Problem Hi everyone, I am having problem with function I cannot get to work properly when no card are inserted into my reader. The first call with SCARD_STATE_UNAWARE return immediately with dwEventState equal to 0x000222. Then I copy this value into CurrentState recall SCardGetStatusChange. Return without blocking again but this time with dwEventState equal to 0x000012. If I repeat the process without inserting a card it will switch of status between 0x000222 and 0x000012 back and forth. If I insert a card in the reader it will return me that a card is present and the next call to SCardGetStatusChange will block until I remove the card which is correct... Do you have any idea what it could be? Regards, Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 88992
- Next
  - 1
    - How to use one Analog-to-Digital Converter between Two drivers? I am developing battery driver using Windows CE 5.0 and SHARP's ARM9 microprocessor LH7A404. The touch panel driver has already used the Analog-to-Digital Converter of LH7A404, and I don't want to add one more Analog-to-Digital device, so the LH7A404's Analog-to-Digital Converter was used by two driver at the same time. It is really a nightmare. The two driver might use the Analog-to-Digital Converter at the same time and two drivers get the wrong result! So I try to make a globe variable. When the touch panel want to use the Analog-to-Digital Converter, set the variable to "0", and set it to "1" when finish. The battery driver should read the varible before using the Analog-to-Digital Converter. Read "1" means it can use. So where should I put the globle varible or is there a better solution? Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 88991
  - 2
    - READ_PORT_BUFFER_UCHAR usage... Hi all, I want to use this function instead of ReadFile in my application because of performance considerations. The problem is that this function doesn't update the port address. I tried to get 16 bytes from the COM2 port. The first 4 bytes i get are true but then it repeats the fifth byte. How can i get around this issue? Do you know of any function other than ReadFile to read from the port? Or can anyone show me how can i use this function to read 16 bytes from the port? Thanks for any help.. Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 88985
  - 3
    - Help needed in Installing the WinCE 5.0 driver on CEPC using .cab files for some device Query A: ======== I have successfully installed the driver on CEPC. I have copied driver .dll files in Program files and in windows directory, the required registry keys for loading the driver were also created in CEPC. Now when i connect the Nokia handset with CEPC then it displays a dialog box prompting a user to enter the name of the appropriate USB device driver DLL. When i give the driver name then it tries to find the driver from the host i.e. "J:\WINCE500\PBWorkspaces\cepc_x86\RelDir\CEPC_x86_Debug". It is not trying to find from CEPC. I think as i have already installed the driver then: 1. Why it is not trying to search appropriate registry entries from CEPC 2. Why it is not trying to search appropriate driver from CEPC for this device 3. Why it is showing dialogue box to enter the name of the driver from the host system. Note: First i booted CEPC using the run time image created by Platform builder present on the host system and later i attach the Nokia handset to load the driver for modem device. Query B: ======= I have created the cab file for installing the driver on CEPC using inf file. Now in run time image i provided support for cab installer. I am able to install it from the cab file when i do double click on cab file and after the installation of the driver cab file is deleted automatically. >From platfrom builder 5.0 help i find the following: (Snip) The Wceload tool (Wceload.exe) runs on your target device. You use this tool to install or remove the cab file from a location that you specify. If you do not specify a location, the cab file will be installed in or removed from the default location. The default location is the Program Files directory on your target device. wceload Specifies how it removes the cab file after installation. Value Description 0 Does not remove the cab file. 1 Removes the cab file. This is the default value. 2 Treats the file as chuck blocks of data, and dynamically deletes them. ........ (Snip end) Now please suggest how can i use this wceload.exe tool. When i do double click on this tool it says "Please specify a cab file or double-tap file to install the application" Please suggest whether it is used from command prompt? Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 88979
  - 4
    - Help required with PlatBuilder 5.0 on PXA255 Hi ! Others have had this problem before and have posted it in some newsgroups , but there has been no solution yet. I'm building a 5.0 BSP for a platform using the PXA255. The bootloader runs fine and everything is working fine until I try to run the kernel. The processor gets stuck when starting the MMU. I've checked my test code, I've checked my Config.bib .... no visible mistake. Currently I don't have a JTAG debugger (will hopefully have one next week), so I'm stumbling 'round in the darkness a bit, but I have working Test code (kind of complex LED blinker) in two versions (physical and virtual addressing) which works fine before MMU switch, but not afterwards. I tried the same thing with SA1110 (after hacking some makefiles to remove thumb support) and got stuck with the same problem. I know this problem exists with others and if there is anyone out there who discovered the same problem and has a remidy, I would be very thankful for help. Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 88977
  - 5
    - Passthru loading problem in CE 5.0 Hi, I am porting IM driver passthru in CE 5.0. I have successfully build the pasthru and loaded in K-Jam(Win CE 5.0). But after installation of passthru and soft reset there will be two instances of WiFi adapter. One is TNETWLN1 and other is PASS\TNETWLN1. This happens everytime. After second reboot instance TNETWLN1 goes away. I want to know does anyone ever encounter same behavior. Are there any other things that has to be done in passthru to get rid of this problem? Thanks Rajat Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 88976
  - 6
    - Volume Key and Mobile OS default volume setting bar Dear All, I have a button(key) driver including a Volume Up/Down key controlling. I change the gain value directly by writing register value of audio codec while the volume is pressed. Although I can change the volume in this way, the scrolling bar of OS Desktop volume setting did not act to corresponding volume position. How can I make the volume scrolling icon move when I press the volume key. call waveOutMessage( )?? Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 88974
  - 7
    - Re: (Help)(How to identity WinCE Nand storage as Usb Disk) "MikeHan" <hanzn@126.com> ¼¶¼g©ó¶l¥ó·s»D:... > Dear Nicolas & Friends: > > Thank you very much for your reply. I'm very sorry I havn't > descipe this question clear, please see the following: > > --------------------------- > | | > | | > | | > | Resident Flash | > | | > | | > | | > | | > | =================| > | OS | > | | > | =================| > | Loader | > ================== > > Nand Flash > > Now our wince BB board has a large nandflash(2G), but the OS is only > 200M. > > We have make the resident flash as a visiable storage, but I want to > make it as Usb Mass Storage disk when it connecting with PC. > According to the usb driver of Wince, I must operate the resident flash > with the following mode: > > Store_init > Store_Close > DeviceIOControl( Read, write....). > > I don't know how to operate this resident flash and make it as a usb > device on PC. I 'm familar with Usb driver, but I'm not familar with > storage device. > > Please help me thank you very much. > > Best Regards > Mike han > > > > ----- Original Message ----- > From: "Jacky Ko" <JackyKo@discussions.microsoft.com> > Newsgroups: microsoft.public.tw.windowsce > Sent: Friday, August 25, 2006 12:43 AM > Subject: RE: (help)(???WinCE?Nand??????Usb?) > > >> ???????Nand flash???,??block driver???????? >> ??USB???IO???NAND flash????? >> -- >> Jacky Ko >> Microsoft MVP for Windows Embedded >> www.advantech.com >> Advantech Co., Ltd >> >> > > > > Best Regards > Mike Han > > > "Nicolas BESSON" <n_besson@adeneo.adetel_group.com> > ???????:u4smqJ3xGHA.356@TK2MSFTNGP02.phx.gbl... >> Hi Mike, >> >> I'm not sure to understand what you really want to do with this extra >> nand flash area. >> If you want to make it visible under Windows CE as a storage area, you >> have to develop a block device driver. The first step for that kind of >> driver is to implement an FMD to manage the access to the nand flash >> ship. This FMD is used by the FAL to give access to the content of a >> storage area. >> Registry settings are need for your driver to be available by the storage >> manager. >> >> Take a look to that page for detailed steps : >> http://msdn.microsoft.com/library/default.asp?url=/library/en-us/wceddk40/html/cxhowHowToDevelopFlashMediaDriverFMD.asp >> >> >> BR >> >> -- >> ----------------------------------------- >> To reply to me, remove the underscores (_) from my email address (and >> please indicate which newsgroup and message). >> >> Nicolas BESSON >> ADENEO (ADESET) >> Windows Embedded Consultant >> >> MikeHan a écrit : >>> Dear Friends: >>> >>> My WinCE BB has 2G nand flash, but the Code&Data is only 20M, so >>> I have confige the residual space as a storage disk. >>> How can I make this space as Usb Mass Storage disk, I analysis >>> WinCE Usb driver code, and now when device attached to the PC, Usb >>> driver received "Attach" message , for this message, Usb driver need >>> initialize Store(Call Store_Init), but it's fail. >>> >>> Please help me, my good friend, and I believe following the >>> increasing of nand flash, this need will be more and more earnest. >>> >>> Best Regards >>> Mike Han >>> >>> Best Regards >>> Mike Han >> >> -- >> ----------------------------------------- >> To reply to me, remove the underscores (_) from my email address (and >> please indicate which newsgroup and message). >> >> Nicolas BESSON >> ADENEO (ADESET) >> Windows Embedded Consultant > > Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 88970
  - 8
    - AYGShell Does anyone know if AYGShell API set depends on Standard shell? I add AYGShell API to my headless OS. It builds successfully but would not run. I wonder it really need a shell or something else to make it work. Thanks. Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 88965
  - 9
    - How to use assembly language for ARM? Hi All, From previous postings is looks like Windows CE for ARM processors does not support in-line assemby and that the __asm command is not available. Is there another way to use assembly language in my code for ARM? Any comments or sample source code would be greatly appreciated. Thanks, Richard Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 88962
  - 10
    - USB communications fail after RF radition testing We are currently testing a Windows CE 5 based system which uses a USB Host for comms to our custom data collection peripherals. During our RF radiation testing for European CE mark compliance we found that the USB comms would fail and not reconnect. We found that this can be replicated by shorting the data + & - lines on the usb cable with long nose pliers to simulate data scrambling by the RF interferance. This causes the device to lose its enumeration and communications. If you try this whilst connected to an XP based desktop the USB device is lost and then reconnected after the interference stops. On Windows CE the USB does not reconnect. After testing on 2 different CE computers we found that on one removing and reinserting the USB device reestablished the enumeration whereas the other must be rebooted. You can use a memory stick for this simulation. To pass the CE mark test the system must self recover from the RF interferance in the same manner as the XP desktop does. Has anyone experienced this on Windows CE, and if so what settings in the Platform need to be added to ensure that the USB Host comms self repair. Thanks Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 88961
  - 11
    - Debug output message Hi: Due to the Serial Debug output commport will be used on the Application, but the ethernet was connected that moment, at lease had loop-back connection. How can I programmatic switch the Debug output message from serial commport to ethernet port, just like KITL switch from serial to VIMINI? Thanks Lu Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 88960
  - 12
    - PCMCIA 4.2 to 5.0 Hi I am migrating from Windows CE 4.2 to 5.0. I am having some issues with the PCMCIA driver, I am aware from the help and earlier posts that the pcmcia driver model has changed, due to time constraints I would like to move the pcmcia driver from 4.2 to 5.0 without moving to the bus agnostic driver. cardserv.lib does not exist anymore, so what I have done is copied it from 4.2, my pcmcia driver builds in 5.0 and the pcmcia cards that I have tested ciscioaironet350 for example work, the only problem that I am having is that CF memory cards used with a pcmcia adapter are not recognised anymore. Firstly is what I have done above correct and secondly any ideas why the compact flash card is not recognised. Regards Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 88953
  - 13
    - Filter driver Hi, I just built an emulator and added msfilter and waveui. I can see ACM1: comes up but how can I activate this filter? In the wave ui, there seems to be a filter selection UI but that UI doesn't bring up. Many thanks in advance, Jay. Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 88952
  - 14
    - NDIS driver MiniportSend doubt Hi. I am trying to write an NDIS driver. I have followed the NDIS sample from %_WINCEROOT%\Public\Common\Oak\Drivers\Netcard\NE2000. I manage to receive packets in MiniportSend, but I only receive a packet with one buffer, no matter the size of the data I am sending (I am sending an UDP packet). The packet received contains the source ip address and destination ip address (and a few more things), but I can't find the data I am sending, the length of the buffer is always 0x2a. Is this normal, is the data stored somewhere else? Here is the data I am receiving. 0003EF80 FF FF FF FF FF FF 00 00 0003EF88 AC 10 5A 97 08 06 00 01 0003EF90 08 00 06 04 00 01 00 00 0003EF98 AC 10 5A 97 AC 10 5A 97 0003EFA0 00 00 00 00 00 00 AC 10 0003EFA8 65 2C Source IP â?? AC 10 5A 97 Destination IP - AC 10 65 2C Thanks in advanced. Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 88950
  - 15
    - Active sync over Serial Hi, What are the steps needed for active sync over serial in Windows Mobile. Active sync over IR is working fine in Windows Mobile. (In windows mobile, active sync application has the option to connect over IR). In windows CE, first we will make a new connection, using Dial up and Networking from Control panel, over the specified serial port and will make that connection as default. Do we have anything similar in Windows Mobile. Thanks in advance, San Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 88943
  - 16
    - UART issue Hi, I have a hardware which has 5 UARTs and one of them is used for slow IR. In windows CE, all the UARTs are working. But when I tried in Windows Mobile with the same hardware, one UART is not working. While debugging I have seen that driver is writing the data to the FIFO but data is coming to the hyper terminal. What could be the issue. Is ther any limitation or known issue with the number of UARTs in Windows Mobile. Let me know your comments. Thanks in Advance, San Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 88942
  - 17
    - USB 2.0 hub doesn't work on WinCE 5.0 Hi, I am new to WinCE and have trouble to make USB 2.0 hub working. My platform is Geode NX, SiS 741/946. Working USB devices : keyboard, mouse, 2.0 USB diskonkey. 1.1 hub and devices below it. Non-working USB devices : USB 2.0 hub (self-powered and bus-powered) What I found until now is, it takes several seconds in ExternalHub::GetStatusChangeBitmap. And dwBytesTransferred is 0. Where should I begin debugging? Thanks in advance. Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 88939
  - 18
    - missing 91c111 interrupts Hello, I have a CE 4.2 SH3 platform with IRQ0 set as a rising-edge triggered interrupt that is connected to the INT0 pin on a SMSC91C111 ethernet chip. Under high traffic conditions the chip is resetting. I searched this newsgroups and read the postings regarding this issue on this chip and I plan to implement the fix that involves checking the status of the interrupt from the OAL prior to re-enabling the interrupt and setting the IST event so that a "missed" rising edge will be serviced anyway. I was thinking this must be done in OEMInterruptEnable(). What API(s) exist to find out what event handle NDIS has set up to service the IST so that I can set the event myself when this condition occurs? Any advice is appreciated. Cheers, Ken Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 88938
  - 19
    - Could not play MP3 radio stream with WinCE 5.0 media player When I try to open a MP3 radio stream in Windows CE Media Player, I receive this error message: "The server received invalid data from the client on the control connection. ( 0xc00d0032 ). I searched the internet for this error message. According this site: "http://www.narrowstep.com/playerhelp/index.html?wmp_error_0xc00d0032.htm" it means that I should open a specific UDP port on my firewall, but I do not use any firewall in my WinCE os. In fact, I am able to play MP3 radio streams from my XP PC on the same network. I am using Windows CE 5.0. My OSDesign contains all available audio/video codecs and all available Media features from the catalog, including "WMA and MP3 streaming". These are the MP3 radiostreams I use for testing: - http://81.173.3.132:80/ - http://shoutcast.omroep.nl:8022/ Does anybody know what is wrong here? Debugmessages from quartzlib: 1030609 PID:22c70872 TID:42cd0182 CHttpStream::CreateInstance(): Entering. 1030609 PID:22c70872 TID:42cd0182 CHttpStream::GrokStreamName(): Entering. 1030609 PID:22c70872 TID:42cd0182 CHttpStream::GrokStreamName(): Leaving. 1030609 PID:22c70872 TID:42cd0182 CMediaStreamBase::CMediaStreamBase: Entering. 1030610 PID:22c70872 TID:42cd0182 CMediaStreamBase@00070970::ctor: entry, pMonitor=0006FF54 1030610 PID:22c70872 TID:42cd0182 CMediaStreamBase@00070970::GetBandwidthInfo could not find ManualBandwidth. 1030610 PID:22c70872 TID:42cd0182 CPacketPairHistory@00070DF8::Initialize could not find previous IP address. 1030611 PID:22c70872 TID:42cd0182 CMediaStreamBase@00070970::ctor: exit 1030611 PID:22c70872 TID:42cd0182 CMediaStreamBase::CMediaStreamBase: Leaving. 1030611 PID:22c70872 TID:42cd0182 CHttpStream::CHttpStream(): Entering. 1030611 PID:22c70872 TID:42cd0182 CHttpStream::CHttpStream()@00070970 ctor entry. 1030612 PID:22c70872 TID:42cd0182 CHttpStream::CHttpStream()@00070970: m_fFauxOpen = FALSE 1030612 PID:22c70872 TID:42cd0182 CHttpStream::CHttpStream()@00070970: m_fReconnect = FALSE 1030612 PID:22c70872 TID:42cd0182 CHttpStream::_init_post(): Entering. 1030612 PID:22c70872 TID:42cd0182 CHttpStream::_init_post(): Leaving. 1030612 PID:22c70872 TID:42cd0182 CHttpStream::_per_connection_init(): Entering. 1030612 PID:22c70872 TID:42cd0182 CHttpStream::_per_connection_init()@00070970: m_fFauxOpen = FALSE 1030612 PID:22c70872 TID:42cd0182 CHttpStream::_init_post(): Entering. 1030612 PID:22c70872 TID:42cd0182 CHttpStream::_init_post(): Leaving. 1030613 PID:22c70872 TID:42cd0182 CHttpStream::_per_connection_init()@00070970: m_fReconnect = FALSE 1030613 PID:22c70872 TID:42cd0182 CHttpStream::_per_connection_init(): Leaving. 1030613 PID:22c70872 TID:42cd0182 CHttpStream::Configure(): Entering. 1030614 PID:22c70872 TID:42cd0182 CHttpStream::Configure(): Leaving. 1030614 PID:22c70872 TID:42cd0182 CHttpStream::CHttpStream()@00070970::ctor: exit 1030615 PID:22c70872 TID:42cd0182 CHttpStream::CHttpStream(): Leaving. 1030617 PID:22c70872 TID:42cd0182 CHttpStream::CreateInstance(): Leaving. 1030617 PID:22c70872 TID:42cd0182 CBwController::ComputeDataRates(): Reduce thresh 1200, Increase thresh 2400 1030617 PID:22c70872 TID:42cd0182 CHttpStream::InternalQueryInterface(): Entering. 1030617 PID:22c70872 TID:42cd0182 CHttpStream::InternalQueryInterface(): Leaving. 1030617 PID:22c70872 TID:42cd0182 CHttpStream::Open(): Entering. 1030618 PID:22c70872 TID:42cd0182 CHttpStream::Open()@00070970:http://81.173.3.132:80/ 1030619 PID:22c70872 TID:42cd0182 CHttpStream::GrokStreamName(): Entering. 1030619 PID:22c70872 TID:42cd0182 CHttpStream::GrokStreamName(): Leaving. 1030620 PID:22c70872 TID:42cd0182 CHttpStream::GetProxyInfo(): Entering. 1030621 PID:22c70872 TID:42cd0182 0x82be0800: IE 5.5 GetConnectedState failed! 1030621 PID:22c70872 TID:42cd0182 0x82be0800: Proxy-settings for host 81.173.3.132:80 = DIRECT 1030621 PID:22c70872 TID:42cd0182 CHttpStream::GetProxyInfo(): Leaving. 1030621 PID:22c70872 TID:42cd0182 CHttpStream::Open()@00070970: Posting locating server message to monitor 1030621 PID:22c70872 TID:42cd0182 CHttpStream::Open(): Leaving. 1030623 PID:22c70872 TID:c32f7832 CHttpStream::CatchUnprocessedMessage(): Entering. 1030623 PID:22c70872 TID:c32f7832 CHttpStream::ContinueOpen(): Entering. 1030623 PID:22c70872 TID:c32f7832 CHttpStream::ContinueOpen()@00070970::about to request connection 1030885 PID:22c70872 TID:c32f7832 CHttpStream::ContinueOpen()@00070970: Posting connecting to server message to monitor 1030885 PID:22c70872 TID:c32f7832 CHttpStream::ContinueOpen(): Leaving. 1030885 PID:22c70872 TID:c32f7832 CHttpStream::CatchUnprocessedMessage(): Leaving. 1030890 PID:22c70872 TID:c32f7832 CHttpStream::CatchUnprocessedMessage(): Entering. 1030890 PID:22c70872 TID:c32f7832 CHttpStream::CatchUnprocessedMessage()@00070970: rcvd FD_CONNECT state = 2 1030890 PID:22c70872 TID:c32f7832 CHttpStream::OnConnectEvent(): Entering. 1030890 PID:22c70872 TID:c32f7832 CHttpStream::SendGetRequest(): Entering. 1030890 PID:22c70872 TID:c32f7832 CHttpStream::SetStreamPos(): Entering. 1030890 PID:22c70872 TID:c32f7832 CHttpStream::SetStreamPos(): Leaving. 1030891 PID:22c70872 TID:c32f7832 CHttpStream::AppendAuthenticationHeaders(): Entering. 1030891 PID:22c70872 TID:c32f7832 CHttpStream::AppendAuthenticationHeaders(): Leaving. 1030891 PID:22c70872 TID:c32f7832 CHttpStream::SendControlMessage(): Entering. 1030891 PID:22c70872 TID:c32f7832 CHttpStream::SendControlMessage():@00070970::sending msg: GET / HTTP/1.0 Accept: */* User-Agent: NSPlayer/8.0.0.0 Host: 81.173.3.132:80 Pragma: no-cache,rate=1.000000,stream-time=0,stream-offset=0:0,request-context=1,max-duration=0 Supported: com.mic 1030891 PID:22c70872 TID:c32f7832 CHttpStream::SendControlMessage(): Leaving. 1030892 PID:22c70872 TID:c32f7832 CHttpStream::SendGetRequest(): Leaving. 1030892 PID:22c70872 TID:c32f7832 CHttpStream::OnConnectEvent(): Leaving. 1030892 PID:22c70872 TID:c32f7832 CHttpStream::CatchUnprocessedMessage(): Leaving. 1031233 PID:22c70872 TID:e3318d86 CHttpStream::HandleReadSocket(): Entering. 1031233 PID:22c70872 TID:e3318d86 CHttpStream::ReceiveControlMessage(): Entering. 1031233 PID:22c70872 TID:e3318d86 CHttpStream::ReceiveControlBytes(): Entering. 1031233 PID:22c70872 TID:e3318d86 CHttpStream::ReceiveControlBytes(): Leaving. 1031233 PID:22c70872 TID:e3318d86 CHttpStream::ReceiveGetResponse(): Entering. 1031233 PID:22c70872 TID:e3318d86 CHttpStream::ReceiveControlBytes(): Entering. 1031233 PID:22c70872 TID:e3318d86 CHttpStream::ReceiveControlBytes(): Leaving. 1031234 PID:22c70872 TID:e3318d86 CHttpStream::ReceiveGetResponse(): Leaving. 1031234 PID:22c70872 TID:e3318d86 CHttpStream::ReceiveControlMessage(): Leaving. 1031234 PID:22c70872 TID:e3318d86 CHttpStream::HandleReadSocket(): Leaving. 1031234 PID:22c70872 TID:e3318d86 CHttpStream::HandleReadSocket(): Entering. 1031234 PID:22c70872 TID:e3318d86 CHttpStream::ReceiveControlMessage(): Entering. 1031234 PID:22c70872 TID:e3318d86 CHttpStream::ReceiveGetResponse(): Entering. 1031234 PID:22c70872 TID:e3318d86 CHttpStream::ReceiveControlBytes(): Entering. 1031235 PID:22c70872 TID:e3318d86 CHttpStream::ReceiveControlBytes(): Leaving. 1031235 PID:22c70872 TID:e3318d86 CHttpStream::OnGetResponse(): Entering. 1031235 PID:22c70872 TID:e3318d86 CHttpStream::OnGetResponse(): Leaving. 1031235 PID:22c70872 TID:e3318d86 CHttpStream::ReceiveGetResponse(): Leaving. 1031235 PID:22c70872 TID:e3318d86 CHttpStream::ReceiveControlMessage(): Leaving. 1031235 PID:22c70872 TID:e3318d86 CHttpStream::ReallyShutdown(): Entering. 1031235 PID:22c70872 TID:e3318d86 CHttpStream::ReallyShutdown()@00070970: entering with hr = 0xc00d0032 1031236 PID:22c70872 TID:e3318d86 CHttpStream::ReallyShutdown()@00070970: Posting Open message to monitor hr = 0xc00d0032, dwUserContext = 1 1031236 PID:22c70872 TID:e3318d86 CHttpStream::_per_connection_init(): Entering. 1031236 PID:22c70872 TID:e3318d86 CHttpStream::_per_connection_init()@00070970: m_fFauxOpen = FALSE 1031236 PID:22c70872 TID:e3318d86 CHttpStream::_init_post(): Entering. 1031236 PID:22c70872 TID:e3318d86 CHttpStream::_init_post(): Leaving. 1031236 PID:22c70872 TID:e3318d86 CHttpStream::_per_connection_init()@00070970: m_fReconnect = FALSE 1031236 PID:22c70872 TID:e3318d86 CHttpStream::_per_connection_init(): Leaving. 1031236 PID:22c70872 TID:e3318d86 CHttpStream::_cleanup(): Entering. 1031236 PID:22c70872 TID:e3318d86 CHttpStream::ResetHeaderAssembler(): Entering. 1031236 PID:22c70872 TID:e3318d86 CHttpStream::ResetHeaderAssembler(): Leaving. 1031237 PID:22c70872 TID:e3318d86 CHttpStream::CleanupDatagramQueue(): Entering. 1031237 PID:22c70872 TID:e3318d86 CHttpStream::CleanupDatagramQueue()@00070970: Cleanup 1031237 PID:22c70872 TID:e3318d86 CHttpStream::DequeueDatagram(): Entering. 1031237 PID:22c70872 TID:e3318d86 CHttpStream::DequeueDatagram(): Leaving. 1031237 PID:22c70872 TID:e3318d86 CHttpStream::CleanupDatagramQueue(): Leaving. 1031237 PID:22c70872 TID:e3318d86 CHttpStream::_cleanup(): Leaving. 1031237 PID:22c70872 TID:42cd0182 CNSSource::Failure(0XC00D0032) 1031238 PID:22c70872 TID:42cd0182 CHttpStream::Close(): Entering. 1031238 PID:22c70872 TID:42cd0182 CHttpStream::Close()@00070970: Entering 1031243 PID:22c70872 TID:42cd0182 CHttpStream::Close()@00070970: returning NS_E_INVALID_REQUEST m_State = 1 1031243 PID:22c70872 TID:42cd0182 CHttpStream::Close(): Leaving. 1031243 PID:22c70872 TID:42cd0182 CHttpStream::~CHttpStream(): Entering. 1031243 PID:22c70872 TID:42cd0182 CHttpStream::~CHttpStream()@00070970::dtor: entry 1031243 PID:22c70872 TID:42cd0182 CHttpStream::ReallyShutdown(): Entering. 1031243 PID:22c70872 TID:42cd0182 CHttpStream::ReallyShutdown()@00070970: entering with hr = 0xc00d002a 1031244 PID:22c70872 TID:42cd0182 CHttpStream::ReallyShutdown()@00070970: m_State is READY, hr = 0xc00d002a, dwUserContext = 1 1031244 PID:22c70872 TID:42cd0182 CHttpStream::ReallyShutdown(): Leaving. 1031244 PID:22c70872 TID:42cd0182 CHttpStream::~CHttpStream(): Leaving. 1031244 PID:22c70872 TID:42cd0182 CMediaStreamBase@00070970::dtor: entry 1031237 PID:22c70872 TID:e3318d86 CHttpStream::ReallyShutdown(): Leaving. 1031244 PID:22c70872 TID:e3318d86 CHttpStream::HandleReadSocket(): Leaving. 1031246 PID:22c70872 TID:42cd0182 CMediaStreamBase@00070970::dtor: this is not the message pump thread 1031246 PID:22c70872 TID:42cd0182 CMediaStreamBase@00070970::dtor: exit Nick Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 88937
  - 20
    - (Help)(How to identity WinCE Nand storage as Usb Disk) Dear Friends: My WinCE BB has 2G nand flash, but the Code&Data is only 20M, so I have confige the residual space as a storage disk. How can I make this space as Usb Mass Storage disk, I analysis WinCE Usb driver code, and now when device attached to the PC, Usb driver received "Attach" message , for this message, Usb driver need initialize Store(Call Store_Init), but it's fail. Please help me, my good friend, and I believe following the increasing of nand flash, this need will be more and more earnest. Best Regards Mike Han Best Regards Mike Han Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 88930
  - 21
    - RAS Server User Credentials Hiho! I'm writing an administration tool for the WinCE-RAS-Server. The RasIOControl-function provides setting and removing user-credentials. Is it possible to read those information? I just want to get a list of the allowed usernames. I don't mind the passwords. Has anybody an idea how to do that? I already thought about the CredRead-function but I didn't find information what to enter for the target-string. Thank for your help! Regards, DennisB Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 88929
  - 22
    - why I can't install program on device by activesync? I want to install some program on pocket pc by activesync. but there exists some problem. One is that when I excute Add/Remove Programs in ActiveSync tools, this program is waiting for ever. The other is that this program can excute, but when installing program,it would show" The mobile device is no longer connected. please connect the device and run Application Manager again. On device, It shows that there is a problem on rapiclnt.exe, please report these to microsoft. Form debug info , The rapiclnt.exe has aborted. who can help me? Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 88928
  - 23
    - Serial driver- 16 byte FIFO usage! Hi all, I am working on serial communication and my problem is that the CPU usage is about 90% during serial communication. For this reason, i want to improve performance by using the 16 byte FIFO of 16C84(or whatever the integrated circuit used for serial communication). How can i efficiently use this FIFO in program? I mean do you know of a way to get 16 bytes in FIFO in 1 step rather than in 16 steps? Any help is greatly appreciated... Thanks... Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 88925
  - 24
    - sdmmc porting problem report Hi, all I've got problems with porting the sdmmc 1.x driver from WCE 4.2 to WCE (windows mobile) 5.0. There is just little time given to me. Plz, help me. Is it possible to port the sdmmc to WCE 5.x in a short time? The below is the problem list. [Problem List] 1. At first, I got some problems when I ported it at Debug mode. One of them was my device was halted and it didn't work again. But after building by releas mode, it seemed to work fine... maybe not I think now. --> anyone knows why? 2. Finally I found that a card was detected and I was able to see the folder, "Storage Card". But I found out that the driver reported an error (ERROR_WRITE_PROTECT) due to the SD hardware protection, but the OS didn't show up any message. The driver calls SetLastError(ERROR_WRITE_PROTECT) but no answer.. I guess it seems not to notice other errors as well. --> plz, help me.. it's driving me crazy. Is it related to the problem number 3 below? 3. GetStorageID error I've seen several lists with the problem but little bit different except the list below. Plz, answer how to solve it. --> jojje! Have you found the answer. ------------------------------------------------------------------------------ ------------------------ Hi, I've seen discussions about GetStorageID here before, but not exactly this error maybe. In the SDMemory driver (in file sdmemmain.cpp, function GetStorageID) the following check of buffer space fails: if( cBytes < (sizeof(*psid)+SD_SIZEOF_STORAGE_ID) ) GetStorageID return ERROR_INVALID_PARAMETER. cBytes is determined by COREOS\STORAGE\STOREMGR\store.cpp and is set to sizeof (STORAGE_IDENTIFICATION) (=16 bytes). SD_SIZEOF_STORAGE_ID is 12 and sizeof(*psid) is 16, so this check will fail. What should I do? I'm using CE 5.0 on a Samsung s3c2410 platform. Thanks, Jojje ------------------------------------------------------------------------------ ----------------------------------------------- Thank you! Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 88922
  - 25
    - Take long time to detect and recognize USB storage device I believe this issue has been raised quite a few times. We have been dismissing it as a problem associated with USB storage device's controller and/or firmware. Recently, one of our customer raised this issue again. As the result, I spent some time to investigate and done some testing. I found that "Hive-based" registry support component is causing the delay in detecting and recogniztion USB storage device. When I built a WinCE 5.0 image WITHOUT "Hive-based" registry support, the system can detect and recognize USB flash storage device almost instantly. When I built a WinCE 5.0 image WITH "Hive-based" registry support, it takes the system more than 90 seconds to detect and recognize the very same USB flash storage device. I verified the above behavior on two separate x86 based system with different CPU. The above behavior is consistence on both system. 1. eBox-II using ICOP_Vortex86 BSP 2. Via Eden system using ViaCN BSP I use "Internet Appliance" template with the default components to build the image with the following components added. - ATAPI Block driver - FAT file system - USB Storage Class driver - Hive-based registry (excluded in some of the builts) ---------------------------------------------------------------------------------------------------------------------- I am hoping that some of you out there experienced similar problem, found a solution and willing to share with everyone here. Best Regards, Samuel Phung ICOP Tag: Integration of .NET Compact Framework 2.0 SP1 and SQL Mobile into Platform Builder 4.2 and Windows CE .NET 4.2 Tag: 88917

I have installed the 060731_2006M07 and 060630_2006M06 updates, this
allow users to integrate both .NET Compact Framework 2.0 SP1 and SQL
Mobile into Platform Builder 4.2 and Windows CE .NET 4.2. But does not
function correctly, when i generate my OS image that integrate CF 2.0
in combination with CF 1.0 SP3, i don't find .Net CF 2.0 and SQL mobile
Dll's in my windows CE.Net repertory.
1 - please, is it possible to combine both CF 1.0 SP3 and CF2.0 in the
same OS image?
2 - same question about SQL Server 2.0 ans SQL mobile?

Thanks.

Top