Import fmd driver to platform builder

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Unknown or old version of bootloader Dear All, When I load my Image By loadcepc there is a message which shows that my Image doesn't contain any Valid bootloader. So after load completes my system hangs. Here is the detail of my project. I use Win Ce 6.0 . Hardware: Vortex SX-6154(ICOP company) 1-Board Support Package: ICOP_Vortex86_60B: x86 2-Design Template: Industrial Device 3-Design Template Variants: Internet Appliance 4-All next Steps: Default options are selected 5-I Disabled All build options. I just enabled â??Enable Ship Buildâ?? AND â??Run-time image can be larger than 32Mâ?? 6-I added IMGRAM128 = 1 Variable into Environment variable list(I tried without this variable too) I compiled My project in release mode. I made a DOM dos bootable. I copied NK.BIN into DOM. I booted my system and I chose first option(Loadcepc /v NK.Bin). The following Message apeares during load process: Enter a choice: 1 Warning A20 line already enabled 1 PCI bus (Version 3.00) using Configuration Mechanism # 1 Total free extended memory = 65471, largest block = 65471 Block allocated at 0x110000 Loading nk.bin, size = 17908451 nk.bin: Unknown or old version of bootloader Image physical start = 0x00520000, size = 18238216 Section physical start = 0x00520000, size = 16 Section physical start = 0x00520040, size = 8 Section physical start = 0x00520048, size = 4 Section physical start = 0x00521000, size = 28672 Section physical start = 0x00529000, size = 167936 Section physical start = 0x00552000, size = 391228 Section physical start = 0x005B183C, size = 27620 Section physical start = 0x005B9000, size = 1148 Section physical start = 0x005BA000, size = 385592 Section physical start = 0x00619000, size = 25632 Section physical start = 0x00620000, size = 176292 Section physical start = 0x0064C000, size = 8140 Section physical start = 0x0064E000, size = 584244 â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦. After All other sections are loaded, the following message appears and system hangs: Jumping to 0x005224F0 When I do the same with demo Image the Image physical start is 0x00200000 and system starts and the message which shows that there is no bootloader doesn't appear. Would you please tell me what the problem is???????? Thank you in advance M.Samoody Tag: Import fmd driver to platform builder Tag: 113003
  - 2
    - FAL source code available? i can't find it in both public and private folder. i want to debug my FMD deeply. thanks Tag: Import fmd driver to platform builder Tag: 113001
  - 3
    - How to replace a dll... Hello, all. (currently developing a WM6 phone) I know that I can replace a dll file using ActiveSync and debug some faults. Now, I am looking for a debug point, but I can't simply replace a dll using ActiveSync. I can see the message "the file is copied" but cant see any message that I have put in. I think that there are some files that we can't change in the simple way. If any guys know about it, help me. I wanna go home! -- Engineer (Developing Windows Mobile PDAs) Message posted via http://www.pocketpcjunkies.com Tag: Import fmd driver to platform builder Tag: 113000
  - 4
    - Clean format of monolithic filesystem Hi, I have a running OS image that uses Intel PSM 4.0 to make some flash into a 'disk' on CE5. This is set up such that the Storage Manager AutoLoad registry section is used to load the driver. Everything works fine. However, I'd like to have a relatively simple way to return a given device to 'factory default' configuration, including deleting any shadowed files that are stored on the PSM volume, preferably without adjusting the registry, etc. and forcing a new test cycle for the OS build. Unfortunately, items loaded from the AutoLoad segment of the Storage Manager registry are not accessible as "volumes" and, as far as I can tell, can't be accessed as though they are real filesystems. I'd like to simply pass a IOCTL_DISK_FORMAT_MEDIA to the driver and be done with it (it's designed to handle that IOCTL), but I can't get a handle which I can use with DeviceIoControl() to do this. The situation is similar to trying to operate, as a whole, on the Release folder filesystem driver, which seems to suffer from this same problem. Thanks for any pointers to ways to do this. Paul T. Tag: Import fmd driver to platform builder Tag: 112997
  - 5
    - CPCEnablePcmcia, SetEvent and WM_QUIT Hello all, In the deconstructor of the PCMCIA model device driver class, CPCEnablePcmcia, the event handler thread created by this class is closed with both SetEvent(m_EventList[TERMINAGE_THREAD]) and PostThreadMessage(...WM_QUIT...) function calls. Does anybody know why both methods of closing the thread were included in this public class? I've modified the code to just use SetEvent (I removed the line =93PostThreadMessage( GetThreadId(), WM_QUIT, 0, 0 );=94) and this modification still allows the thread to close cleanly and everything proceeds as expected. This closes the thread because the thread is waiting on the TERMINAGE_THREAD event in its WaitForMultipleObjects call. The reason I'm asking is that there's a stage in our device's boot process where an error occurs when CPCEnablePcmcia calls PostThreadMessage(...WM_QUIT...). I was wondering if removing this line would be a possible solution to avoiding this error. I=92m not sure what purpose this line of code serves. Thanks in advance, Jared Tag: Import fmd driver to platform builder Tag: 112996
  - 6
    - Environment variable building platform I have several projects that use the same platform. I would like to slightly change the code in the platform (with #ifdefs) depending on the PBWorkspace that I currently have open. I tried using Platform Settings, Environment, and setting a variable there which I hoped to #ifdef during compilation of the platform. But it doesn't seem to pick these up in C or CPP files. What's the suggested method to tackle this problem? Thanks Tag: Import fmd driver to platform builder Tag: 112994
  - 7
    - PhoneSendDTMFStart in WM5 I need to send DTMF tones over exisitng call. In WM6 you have the PhoneSendDTMFStart and Stop functions, are these not in WM5. I am not using TAPI is there some other high level way of doing it in Wm5. Please help Thanks Tag: Import fmd driver to platform builder Tag: 112988
  - 8
    - Breakpoint instantiation Hi All, I'm trying to debug a simple Hello World application on a phytec iMX31 board. But when I set breakpoints on myhello.cpp file, the breakpoints look like a red hollow circle with a yellow caution triangle. When I download the module to the board, the breakpoints are never active/instantiated. The application runs and it resides in the modules section of the ce.bib file. Where can be my fault that I can't set breakpoints correctly? I read many things about source path mapping, etc. but none solved my problem. Thanks in advance, Selin Tag: Import fmd driver to platform builder Tag: 112983
  - 9
    - How to Export BSP in Wince 6.0? Hi all, I have build one BSP and i want to export it (i.e.create .msi file). In Wince5.0 it is easy there is option Export BSP but in Wince6.0 (Visual Studio 2005) not that type of option. Is any body know how to Export BSP in Wince6.0? Thanks in advance Swapnil Tag: Import fmd driver to platform builder Tag: 112981
  - 10
    - mounting of the hive registry on sd card Hi All, I was working on mounting of the hive registry on sd card from one day still i am not succeded. Can anybody help me. for this purpose i have changed the platform.reg please find the changes i did. ; HIVE BOOT SECTION IF BSP_NOSDHCGUM ! [HKEY_LOCAL_MACHINE\init\BootVars] "SystemHive"="\\PSM\\system.hv" "StartDevMgr"=dword:1 "Flags"=dword:0 "DefaultUser"="WinCE User" "RegistryFlags"=dword:2 ; disable aggressive flushing [HKEY_LOCAL_MACHINE\System\StorageManager] "Flags"=dword:1000 [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SDHC_GUM] "Dll"="sdhc_gum.dll" "Prefix"="SDH" "Order"=dword:21 "DMAChannel"=dword:14 ;comment this out to disable DMA support "DMAIsrDll"="giisr.dll" "DMAIsrHandler"="ISRHandler" "DMAIRQ"=dword:19 ;"DMASysIntr"=dword: "DMAISTPriority"=dword:63 "DMABufferSize"=dword:10000 "ControllerIRQ"=dword:17 "ControllerISTPriority"=dword:64 "ClockAlwaysOn"=dword:0 "ClockOnIfInterruptsEnabled"=dword:1 "MaximumClockFrequency"=dword:989680 ;1312D00 "Flags"=dword:1000 ; Added for loading in Boot phase, not twice "BootPhase"=dword:1 ; block-driver based file system, must boot in phase 1 [HKEY_LOCAL_MACHINE\Drivers\Builtin\SDBusDriver] "Order"=dword:15 "Dll"="SDBus.dll" "Prefix"="SDC" "ThreadPriority"=dword:64 ; default thread priority for dispatch thread "RequestListDepth"=dword:30 ; pre-allocated requests "Flags"=dword:1000 ; DEVFLAGS_TRUSTEDCALLERONLY "IClass"=multi_sz:"{20FA98A8-B298-4b32-8D72-C716AEE2FA84}=%b","{6F40791D-300E-44E4-BC38-E0E63CA8375C}=%b" "Flags"=dword:1000 ; Added for loading in Boot phase, not twice "BootPhase"=dword:1 ; block-driver based file system, must boot in phase 1 [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\SDMemory] "Name"="SD Memory Card" "Folder"="Storage Card" ;"PartitionDriver"="" ; removable storage cannot have partitions "MountAsRoot"=dword:0 ; "MountAsBootable"=dword:1 ; bootable, may contain hive [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MMC] "Name"="MMC Card" "Folder"="Storage Card" ;"PartitionDriver"="" ; removable storage cannot have partitions ; SD Memory Storage class driver [HKEY_LOCAL_MACHINE\Drivers\SDCARD\ClientDrivers\Class\SDMemory_Class] "Dll"="SDMemory.dll" "Prefix"="DSK" "BlockTransferSize"=dword:40 ; send no more than 64 blocks of data per bus transfer "SingleBlockWrites"=dword:1 ; alternatively force the driver to use single block access ;"IdleTimeout"=dword:7D0 ; 2000 milliseconds ;"IdlePowerState"=dword:2 ; 0 == D0, 1 == D1, etc. ;"DisablePowerManagement"="" ; if value present, then disable (remove value to enable) "Profile"="SDMemory" "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}", "{A32942B7-920C-486b-B0E6-92A702A99B35}" "Flags"=dword:1000 ; Added for loading in Boot phase, not twice "BootPhase"=dword:1 ; block-driver based file system, must boot in phase 1 ; MMC Storage Class Driver [HKEY_LOCAL_MACHINE\Drivers\SDCARD\ClientDrivers\Class\MMC_Class] "Dll"="SDMemory.dll" "Prefix"="DSK" "BlockTransferSize"=dword:40 ; send no more than 64 blocks of data per bus transfer ;"SingleBlockWrites"=dword:1 ; alternatively force the driver to use single block access ;"IdleTimeout"=dword:7D0 ; milliseconds ;"IdlePowerState"=dword:2 ; 0 == D0, 1 == D1, etc. ;"DisablePowerManagement"="" ; if value present, then disable (remove value to enable) "Profile"="MMC" "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}", "{A32942B7-920C-486b-B0E6-92A702A99B35}" ENDIF BSP_NOSDHCGUM ! ; END HIVE BOOT SECTION I am using GumstixIII bsp on Wince6.0. With this changes i can able to load sdbus.dll and host driver (sdhc_gum.dll) successfully. but while loading the sdmemory.dll (Client) i am getting these Debug messages. OSAXST1: >>> Loading Module 'sdmemory.dll' (0x83EE6E04) at address 0xC0CC0000-0x C0CD9000 in Process 'NK.EXE' (0x82016AA0) DEVICE!RegReadActivationValues RegQueryValueEx(\Drivers\SDCARD\ClientDrivers\Cla ss\SDMemory_Class\BusPrefix) returned 2 DeviceFolder::LoadDevice(\Drivers\SDCARD\ClientDrivers\Class\SDMemory_Class) las t 9 TicksOSAXST1: <<< Unloading Module 'sdmemory.dll' (0x83EE6E04) at address 0x C0CC0000-0xC0CD9000 in Process 'NK.EXE' (0x82016AA0) SDBusDriver: Failed to load driver with path: \Drivers\SDCARD\ClientDrivers\Clas s\SDMemory_Class Tag: Import fmd driver to platform builder Tag: 112948
  - 11
    - Porting WINCE on arm9 processor Dear Friends, I have an embedded board with arm9 based 32 bit processor which has linux already ported on it. As vendor has not yet done it, I want to port wince on it. I have done required modification in the U-Boot bootloader and want to test it. I guess for that I need an wince image. Please feel free to provide any suggestion or hint on how we can create wince image with minimum functionality and capable to run on arm9 based 32 bit processor. Thanks, Ankur Tag: Import fmd driver to platform builder Tag: 112947
  - 12
    - Mounting Storage device with two physical partitions as two drives... hello, We have a storage device with two physical partitions of different sizes for which we have developed a storage driver(block driver using block driver IOCTLs ) in WinCE 5.0 and 6.0.Each physical partition has addresses starting from 0.Till now we have mounted one of the physical partitions with FAT file system and we perform read and write to that physical partition from our storage driver.Now we want to mount both the physical partitions as two separate drives during boot up itself using the same storage driver.We want FAT to manage both the partitions.I would really appreciate it if some one could give us ideas on how this can be accomplished.. Tag: Import fmd driver to platform builder Tag: 112943
  - 13
    - System timer not accurate Hi all I am using smdk2440 for wince 4.0. My problem is that the system timer run fast compared to real time. the result is that backlight time and suspend timeouts exhaust early instead at the time specified in settings. What may be the cause? kindly suggest. Many thanks -- Message posted via http://www.pocketpcjunkies.com Tag: Import fmd driver to platform builder Tag: 112940
  - 14
    - Windows CE 6.0 Driver Question In Windows CE 6.0, some drivers are moved to Kernel level and what is the critirea for deciding the driver is in the user mode or kernel mode. Is it some thing like developer can choose(In this case where to make the difference) or is it a predefined one like serial driver should be in user mode and some other driver in kernal mode(In this cazse where can I find the list). -San Tag: Import fmd driver to platform builder Tag: 112938
  - 15
    - ecdjpeg.dll and CreateJpegFile Hi, I've seen there's a CreateJpegFile function "available" in the JPEG encoding DLL ecdjpeg.dll (talking about 4.2 here). Did anyone ever experience using it or playing around with this? I have a piece of code that uses CreateDIBsection and draws / writes to it, but I'd like to save the end result as a JPG file instead of the bulky BMP I currently have. Alternatively, any BMP to JPEG conversion tool would do the trick provided it's not GUI based. Best regards, Alex Tag: Import fmd driver to platform builder Tag: 112937
  - 16
    - Memory Leak I'm using platform builder 5.0 and observing memory leaks. I think it has to do with csrss.exe launching the cmd.exe that the build scripts use, but I'm not sure. At any rate, after 3-4 clean builds, my commit charge is well over 2Gb. Is anyone else seeing this? I used a .bat script to launch many cmd.exe and then close them all. The commit charge would increase around 50Mb even after all cmd.exe's were closed. -Thanks Tag: Import fmd driver to platform builder Tag: 112932
  - 17
    - ANN: DShow MPEG-2 Demux Filter available again! The CE Multimedia team once published the source code for an MPEG-2 demux filter on the gotdotnet website. When that site retired, the demux code went with it. But now it's back, this time at http://code.msdn.microsoft.com/mpeg2demux. Please feel free to check out the resource page, download the code, and start...umm...demultiplexing! Thanks, -- Damon Barry Windows Embedded CE Multimedia This posting is provided "AS IS" with no warranties, and confers no rights. Tag: Import fmd driver to platform builder Tag: 112929
  - 18
    - Phone call with linemakeCall HI, I'm developing app for WM5 with VC++. Im using TAPI to make call with linemakeCall. How do i monitor how the progress of this call is progress eg dialling state and when its connected as i need to inform user on progress of outgoing call. Am i going about it right way? Tag: Import fmd driver to platform builder Tag: 112926
  - 19
    - Problems with mshtml.dll and Internet Explorer 6 Hi all, I am developping a on WinCE 5. And experiencing a lot of problems with Internet Explorer 6 for WinCE. In IESample I get the following error quite a lot: 17876 PID:6b8ea5a2 TID:b71efce Exception ffffffff Thread=8b6b8950 Proc=6b8ea5a2 'iedaily.exe' 17876 PID:6b8ea5a2 TID:b71efce AKY=00000021 PC=038c3b20 mshtml.dll+0x00173b20) ESP=0c3afaa8 EA=00000000 If this error occurs it effects the layout and performance of the websites I am visiting a lot. For example I don't get any background anymore, pictures from different buttons are disaperead and so on. It looked to me like it was related to the images in the cache. So I deleted the cache, this hadn't any result. Then I deleted the index.dat from my history. And the sites all worked good again for some time, troubles started to occur again in a matter of minutes. To cancel out the cache problem I disabled caching on my CE device, this seems to work, because I don't get the error anymore, plus everything stayed in place even after a day on the same website. The drawback of this of course is that the sites stayed slow, and my bandwidth usage increased. So I turned on the cache again, and I got the same error again in a matter of minutes. The cache settings I use are: [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\5.0\Cache\Content] "CacheLimit"=dword:00001000 [HKEY_LOCAL_MACHINE\Software\Microsoft\Internet Explorer\Image Caching] "Cache Size"=dword:1048576 "Item Size"=dword:65536 "Max Items"=dword:128 Now I have a couple of questions on this subject: Q1) What does mshtml.dll exactly do? Q2) What does the error description mean? Q3) Can it be that the index.dat and the files themselves from the "Temp Inet Files" are corrupt? Q4) Is there a way that I can read out the information in index.dat? Many Thanks, Michel van Geffen Student at the Avans University of Professional Education Tag: Import fmd driver to platform builder Tag: 112909
  - 20
    - MPEG-2 Demux filter for wince 6.0 Hi All, Could anybody please point to the location of 'MPEG-2 Demux for wince 6.0' . I searched in MSDN code gallery but without any hit. Thanks and Regards, dev Tag: Import fmd driver to platform builder Tag: 112908
  - 21
    - Keyboard is not detected in WINCE 6.0 Hi all, I am working in PXA270 processor on WINCE 6.0. My USB mouse get detected and it works properly but USB keyboard not detected. When USB keyboard inserted in to USB port, first time it blinks but after that it not giving any response on image but on terminal i got messages when any key press. Is this KEYBOARD detection problem is already in WINCE 6.0? I have added USB Function Driver USB Host Support USB Human Input Device (HID) Driver USB HID Keyboard and Mouse only USB HID Keyboard only USB HID Mouse only Catalog item from Core OS in my image. Is any catalog item is missing? Thanks in advance Swapnil Tag: Import fmd driver to platform builder Tag: 112902
  - 22
    - Stupid question about adding an application to an OS design Hi All, I have a stupid question about adding an application to my OS design in WCE 6.0. I made an OS design by using most of the default values. Now I simply want to add a "Hello World" application to this OS design and then debug it. What I have done so far is: - I started a new OS design project. Chose my settings and built the solution. I downloaded the image to the target device and it worked. - Then I created a new subproject and set it as a simple "Hello World" application. I only changed the code part to write "hello world" 3 times on the screen. - I chose "Build All Subprojects" from the Build menu. No errors. - When I tried to place a breakpoint on the MyHello.cpp file, the breakpoint symbol is a red circle with an exclamation symbol in it (I guess showing that it could not be instantiated) - I rebuilt the solution (assuming that this will put the application into the image) - I ran viewbin tool ("viewbin -toc nk.bin") and verified that MyHello.exe is in the modules section of the image file in the FLATRELEASEDIR. - I downloaded the image again to run & debug the application. And... - No MyHello.exe under windows directory of the target device!!! - If I explicitly write in the project.bib file the path of the application file on my host pc (MyHello.exe "D:\something\MyHello.exe" NK), then I can see the file under windows directory of the target device. And unfortunately I can't use Remote Tools or Run Program from the Target menu. The connectivity settings only show Default CE Device and I cannot connect to this device. (I'm using phyCORE i.MX31 with WinCE SDK, so I'm using their bootloader and I don't know what's exactly in it yet). I also wathed Mike Hall's tutorial "Introdution To Platform Builder With CE6 Beta" which simply shows the OS design and subproject creation as I did. I had experience with WCE 4.X before, but getting VS environment and WCE6.0 modifications has driven me crazy this week. I will really appreciate any kind of help here. Thanks in advance. Selin selinATheitec Tag: Import fmd driver to platform builder Tag: 112901
  - 23
    - Non-working of SanDisk USB Cruzer Drive with U3 Smart Technology Dear All, Test Setup: 1. TI's DM6446 Based Hardware Board 2. Board acting as USB Host 3. WinCE 5.0 and WinCE 6.0 (with all the latest updates applied) 4. Testing with different type of Mass Storage Disk Pre-requisite: The system is able to detect different USB based Mass Storage devices (Kingston, Sony, Toshiba, Transcend, and SanDisk w/o U3 Technology). Also I am able to do all the operations on the USB device without any issue. All the devices work fine on system wake-up after it is put in suspend mode. Problem: I am facing issue only with SanDisk USB Cruzer Disk with U3 Smart Technology enabled. Initially this device was not getting detected when attached. On further debugging we found that device was continuously returning STALL for the Medium Identification Command. Then we modified USB Mass Storage Class driver in WinCE 5.0 to jump this particular command and found device to be working fine. Now we are facing another issue. When the SanDisk device (with U3 Technology) is connected and working fine, we put the system in Suspend mode. Now on wake-up the device does not work. When we try to click on Device Manager or open Explorer window, USB device is also not seen. On further debugging we observed that device response to Resume command from Host Controller was getting delayed. So we put some fix in USB Host Controller for Resume command that is unless we get response to Resume command no other command request from Mass Storage client driver will be passed to the device. But after this we observe that device responds with ACK for Resume command but does not respond to Signature command. We are unable to find any reason behind this. The above problem is only observed with SanDisk USB Cruzer Drive with U3 Smart Technology. This does not happen with SanDisk USB driver without U3 Technology. We also tried to remove the U3 Technology from the SanDisk drive but no improvement was observed. The other observation was that when we connect the SanDisk USB Cruzer Drive with U3 Smart Technology on PC and check its properties through Disk Management, it shows Partition Style as Not Applicable (in Volume Tab). But other normal USB drives show that as Master Boot Record. I am not sure whether this has some relation to the problem I am facing. I am not sure whether anyone has faced similar issues. Any help on this regard will be greatly appreciated. Regards, Ritesh Tag: Import fmd driver to platform builder Tag: 112895
  - 24
    - Activesync visibility Hi all I have implemented activesync on smdk2440 and I can browse files on my device from PC. But problem is that " Storage card and NAND Flash FAT partition both are visible on PC". I want that only storage card should be visible on PC. How this can be done? Thanks in advance. -- Message posted via http://www.pocketpcjunkies.com Tag: Import fmd driver to platform builder Tag: 112894
  - 25
    - Changing default Icon size -- neverending topic Hi I know that this topic has been discussed many times in this newsgroup. I also read the answers, but they did not statisfy me (if there was any answer at all). So let me explain what i want to do: I try to change the size of the "flying windows" icon which is located at the left bottom in the task bar. In the source file \PUBLIC\SHELL\OAK\HPC\EXPLORER\TASKBAR\taskbar.cpp it is hard coded to the size of 16 pixels in the call LoadImage(). So I can clone the shell and modify it. But hey: I don't wanna do this for all the Icons. I think there must be another way of doing this. According to the posts, I'm not the only one who struggles with that problem. Does anybody else encountered this problem (and solved it ;-) ). Tag: Import fmd driver to platform builder Tag: 112891
- Next
  - 1
    - DDEX1 app giving error(DirectDraw on WinCe6.0) Hi All, When I am running the ddex1.exe on WinCE6.0 (CEPC) I am getting the following error and on the display black screen comes and disappears. My display driver is GPE based and directdraw driver is based on DDHAL. Directdraw apps used to run O.K. on WinCe 5.0. I am migrating now on WinCE6.0. Is there any changes in DirectDraw for WinCE 6.0? Is there any usermode -kernelmode issue here? Error: 4294847715 PID:32e0002 TID:32f0002 GWES Hook fails device creation. DirectDrawCreate fails. 4294847731 PID:32e0002 TID:32f0002 DDEX1: DirectDrawCreate FAILED 4294847798 PID:400002 TID:32f0002 DeleteFromProcessInputLocaleTable: Deleted process from ProcessInputLocale table, hProcess: 0x032E0002 4294847798 PID:32e0002 TID:32f0002 OSAXST1: <<< Unloading Module 'ddraw.dll' (0x8845D8A8) at address 0x404B0000-0x404C6000 in Process 'ddex1.exe' (0x8841E000) Hoping for your reply. Thanks a lot Vikas Patil Tag: Import fmd driver to platform builder Tag: 112890
  - 2
    - Changing default Icon size -- neverending topic Hi I know that this topic has been discussed (or at least started) in this forum many times. So i read all the posts, but either there was no answer or it was not statisfying. Lets make an excample: if i want to change the size of the "flying windows" icon which appears at the left bottom in the taskbar, i can do this by editing the code (or creating a clone and then edit it, of course;-) ) in the file \PUBLIC\SHELL\OAK\HPC\EXPLORER\TASKBAR \taskbar.cpp and change there the size in the function LoadImage(). But hey, i don't wanna do this for every single Icon!!!! I think there must be an other way to do this. Does anybody have experience with it? Tag: Import fmd driver to platform builder Tag: 112886
  - 3
    - Link error - OEMInterruptMask, OEMInterruptDone, OEMInterruptDisable, Hi All im using DAVINCI based DM644x DVEVM wince 5 BSP. I have migrated this BSP to wince6 And now im trying to build OAL it gives me following linking errors - BUILD: [01:0000000048:PROGC ] Linking D:\WINCE600\platform\DAVINCI \target\ARMV4I\debug\oal.exe BUILD: [01:0000000064:ERRORE] oemmain.lib(oemglobal.obj) : error LNK2001: unresolved external symbol OEMInterruptMask BUILD: [01:0000000065:ERRORE] oemmain.lib(oemglobal.obj) : error LNK2001: unresolved external symbol OEMInterruptDone BUILD: [01:0000000066:ERRORE] oemmain.lib(oemglobal.obj) : error LNK2001: unresolved external symbol OEMInterruptDisable BUILD: [01:0000000067:ERRORE] oemmain.lib(oemglobal.obj) : error LNK2001: unresolved external symbol OEMInterruptEnable BUILD: [01:0000000068:ERRORE] oal_timer_davinci.lib(timer.obj) : error LNK2001: unresolved external symbol OEMInterruptEnable BUILD: [01:0000000069:ERRORE] D:\WINCE600\platform\DAVINCI\target \ARMV4I\debug\oal.exe : fatal error LNK1120: 4 unresolved externals I have added NkStub.lib in the sources about - OEMInterruptDone, OEMInterruptDisable, OEMInterruptEnable these function are in nkintr.h (nk.lib) but i dont see any nk.lib in WinCE6. i though it changed to NkStub.lib. and as mentioned i have this lib already in the sources. Can anyone help me to solve this link error.. Thanks in advance, Vinod Tag: Import fmd driver to platform builder Tag: 112883
  - 4
    - CDC / David Liao blog Hi, David Liao writes: "No, there is no USB function client driver support fors CDC-ACM directly. But, we have USB Function Serial driver which can support USB Modem (recogonized by XP and load USBSer.sys). This driver is very close to CDC-ACM and you can use it as example." "USB Function Serial driver" is this the one in : C:\wince600\PUBLIC\COMMON\OAK\DRIVERS\USBFN\CLASS\SERIAL ? What does he mean by "very close" ? Any practical tips on turning this driver into a CDC driver ? Greetings, Rob van den Bergh Tag: Import fmd driver to platform builder Tag: 112882
  - 5
    - ceddk.lib not being built in PUBLIC\COMMON\OAK folder Hi, I am not able to build the CEDDK.lib file in the "WINCE600\PUBLIC \COMMON\SDK\LIB\$(_CPUINDPATH)\" path. I have included both the "Device Manager" & "WinCE driver developmenet kit support library" components in my OS design. At present I am linking my driver to the ceddk.lib present in "$ (_COMMONSDKROOT)\lib\$(_CPUINDPATH)\ceddk.lib" folder (the folder path that contains my OS design). Is it that the ceddk.lib does not get created in the "..\PUBLIC\COMMON \SDK\LIB" folder in Windows CE 6.0 ? Rgds, Vijay r Tag: Import fmd driver to platform builder Tag: 112878
  - 6
    - Adding support for CryptAcquiteContext I'm trying to use CryptAcquireContext() on my device (WinCE 5.00, ARMV4I) but every provider I try (e.g. PROV_RSA_FULL) comes back with the error NTE_PROV_TYPE_NOT_DEF. I've got SYSGEN_CRYPTO and SYSGEN_CERTS defined but I can't see any other components that would obviously support a particular provider. I don't care particularly which provider I use - I'm just trying to either hash a file or encrypt some data so a PC application can detect whether it's been modified or decrypt it using standard Windows functions. Thanks for any help. Tag: Import fmd driver to platform builder Tag: 112871
  - 7
    - Chinese font problem in Wince 5.0 Hi All I want to add Traditional chinese fonts in my OS image. My ROM size setting is approximately 18MB. The components which I need fit in this size, but when I add Chinese font, the PB gives error " the NK size exceeds ROM size". The reported size is about 26 MB. How can I fix this error? Thanks in advance. -- Message posted via http://www.pocketpcjunkies.com Tag: Import fmd driver to platform builder Tag: 112868
  - 8
    - Will DrawText produce memory leak in some state? I find DrawText function maybe produce memory leak, The codes are like following: void showString (CDC * pDC, FIFL *fp ,LPRECT _lpRect) { char temp[60]; TCHAR _str[256]; fread (temp, 1 ,60, fp); MultiByteToWideChar(CP_ACP, WC_COMPOSITECHECK, temp, 60, _str, 256); pDC->DrawText(_str, lpRect, DT_VCENTER | DT_CENTER); // this statement lead to memory leak } The string contains chinese characters which was read from a ASCII text file. Everytime I call this funtion ,there will be a memory leak. If I just did not call the DrawText function, then No memory leak occured. Will DrawText produce memory leak in some state? Thanks! Tag: Import fmd driver to platform builder Tag: 112859
  - 9
    - ASP server-side reading UTF-8 XML file on WinCE 6 Hi, I have an ASP page hosted on an embedded system running WindowsCE 6. When this page is parsed on the server, an xml file containing UTF-8 non-English characters (e.g. Arabic, Hebrew) should be read and displayed on the browser. The problem is that instead of getting the correct text, I get a series of question marks. I used new ActiveXObject("Microsoft.xmlDOM"). And if I use the same ActiveX to read the xml on the client side (desktop Windows), there's no problem. Here's the sample ASP file that is hosted on my embedded device (WinCE 6). The ASP page itself does not contain UTF-8 characters in it: <%Response.Charset="utf-8"%> <%@ language="JavaScript" %> <html> <% function loadxmlASP(xmlfile) { var xmlDoc = new ActiveXObject("Microsoft.xmlDOM"); xmlDoc.async="false"; xmlDoc.load(xmlfile); Response.Write(xmlDoc.parseError.errorCode); return xmlDoc.documentElement.childNodes(0).text; } %> <script> function loadxml(xmlfile) { var xmlDoc = new ActiveXObject("Microsoft.xmlDOM"); xmlDoc.async="false"; xmlDoc.load(xmlfile); return xmlDoc.documentElement.childNodes(0).text; } </script> <body> <% Response.Write("text.xml")); %> <br> <script> document.write(loadxml("text.xml")); </script> </body> </html> Tag: Import fmd driver to platform builder Tag: 112857
  - 10
    - Windows CE 5.0 Update 080420_2008M04 The documentation for the April 2008 QFE set for CE 5.0 seems like its incomplete. It has only one component listed as fixed under 080430_KBKB951302 with no description. (Note the double KB's) Is there a more complete or better description file ? Tag: Import fmd driver to platform builder Tag: 112848
  - 11
    - Using Raw Binary Partition in NAND Flash Hi all I want to create a small binary partition in nand flash on smdk2440. My intention is to store some parameters from my application running under wince 5.0 and read them in my bootloader. The question is, " How can I use FMD to directly read/write a binary partition in wince application?" Many thanks in advance. -- Message posted via PocketPCJunkies.com http://www.pocketpcjunkies.com/Uwe/Forums.aspx/wince-pb/200805/1 Tag: Import fmd driver to platform builder Tag: 112847
  - 12
    - ActiveSync disconnects automatically Hi, I have a strange behavior with my serial ActiveSync connection. After approximately 60 minutes ActiveSync disconnects automatically! I am using WinXP and WinCE6.0 on an GeodeLX800 x86 device. Is there a registry key to configure this timeout? Is this maybe a security related issue? Regards Peter Tag: Import fmd driver to platform builder Tag: 112844
  - 13
    - Hive based registry problem... Hi all, I want to implement a hive-based registery model in my pxa255 board. So, i have done the following by referring to the platform builder documentations. 1) Added the catalog item, Hive based registery 2) Modified my platform.reg file as shown below, -------------------------------------------------------------------------- ; HIVE BOOT SECTION [HKEY_LOCAL_MACHINE\init\BootVars] "SYSTEMHIVE"="System.hv" "Start DevMgr"=dword:1 "DefaultUser"="Ramesh" -------> I included my storage Manager driver registery details too here(I am using stratad...and my storage Manager is working properly and i am able to see the partition named "Flash" [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\StrataFMD] "Flags"=dword:1000 ; For the driver to loade at first boot phase [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash\FATFS] "MountFlags"=dword:2 ----------------------------------------------------------------------- I think, i have included all the details properly in my platform.reg. I done my sysgen properly(i could see default.hv, boot.hv etc in my release directory), Now, when my board boots, i get the following debug messages, -------------------------------------------------------------------------- Loaded symbols for 'D:\MYWORK\WINCE5.0_OS_DESIGNS\INNOVATE255_MYDEBUG5\RELDIR\INNOVATE255_ARMV4I_DEBUG\FILESYS.EXE' 4294767421 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: CertMod.dll not found, using old OEM Trust Model 4294767424 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: FileSystem Starting - starting with clean file system 4294767426 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: FS: initializing ROM/RAM file system 4294767427 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: SC_CreateAPIHandle: pvData == NULL 4294767428 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: FS: Registering file system ROM, index 2, flags 0x00000031 4294767428 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: FS: Mount complete (ROM, index 2, flags 0x00000031) 4294767433 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: InitSharedHeap: 46000000 10000 c 4294767434 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: InitSharedHeap: return 46000060 4294767437 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: FSREG: Unable to read value "NoDefaultUser" under HKEY_LOCAL_MACHINE\init\BootVars 4294767437 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: FSREG: Logging in default user. 4294767438 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: FSREG: Unable to read value "DefaultUser" under HKEY_LOCAL_MACHINE\init\BootVars 4294767439 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: SetCurrentUser: Logging out (nobody), logging in default 4294767439 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: FS: Using default path "\profiles\" 4294767440 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: BuildPath: profiles 4294767441 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: BuildPath: profiles\default 4294767442 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: SetCurrentUser: User hives not supported -- using same registry for all users 4294767444 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: FS: Using default path "Windows\" 4294767474 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: FS: Using default path "Windows\" 4294767480 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: FSREG: Unable to read value "DBFlags" under HKEY_LOCAL_MACHINE\init\BootVars 4294767513 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: Initializing Database 4294767523 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: DB:Validation: Name already exists DB_notify_events 4294767524 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: DB:CeCreateDatabase failed 4294767525 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: Filesystem initialized! 4294767526 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: FILESYS: Waiting for kernel to be ready to launch apps 4294767527 PID:3cb7002 TID:43ca2fba 0x83c9e400: InitMUI: DISABLED (-1039795432) 4294767529 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: FS: HKLM\System\Events not available, no signal events created. 4294767530 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: FILESYS: Launching apps 4294767530 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: ERROR: c:\macallan\private\winceos\coreos\filesys\main\fsmain.c line 4101: 4294767531 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: Unable to locate init key for starting apps! 4294767532 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: FILESYS: Done launching apps 4294767532 PID:3c9eca2 TID:3c9ec7e 0x83c9ea3c: This device has booted 1 times !!! ----------------------------------------------------------------------------- I tried giving the "NoDefualtUser" parameter in my platform.reg, irrespective of what ever i change in my platform.reg and rebuild it(I rebuilded properly, i can see my changes in reginit.ini), i am getting the same error... Unable to read the "NoDefaultUser", although this is not serious error compared to the subsequent one, i want to know whether my changes are getting reflected at runtime... What mistake am i doing here and how do i store my hive based registry in my flash? Please help me up in solving this issue... Thanks in advance. -- Ramesh.c Innovate Sofware Solutions. Bangalore. Tag: Import fmd driver to platform builder Tag: 112838
  - 14
    - Iclass / usb registry Hi, I am trying to get USBSer.dll to work. It is loading now, but initialisation fails for some reason (still searching for that). The USB client settings and their influences and meaning are described here : ms-help://MS.VSCC.v80/MS.VSIPCC.v80/MS.WindowsCE.v60.en/CE_DevelopingDrivers/html/765696cc-93f0-4fda-aac3-1d4b553758df.htm Some (many) things are unclear to me when looking at : [HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers\USBSER_CLASS]: 1) where does the IClass value come from ? 2) Do I need to create a fresh regkey :[HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers\USBSER_CLASS] Or can I just use the one from serial_class ? 3) where are the possible values for interface classes defined ? 4) idVendor / idProduct settings : Are these the ones for the device, or the driver itself ? Which settings can influence the failure of Init ? I would expect I donot need to debug through the entire USB stack to figure this out, or am I wrong ? Greetings, Rob. Tag: Import fmd driver to platform builder Tag: 112837
  - 15
    - warm booting the device crashes filesys.exe Hello all, In my pxa270 based Windows CE 5.0 device, if I put a file larger than 1MB into RAM (i.e. copy a file into MyDevices folder) after performing a warm- boot the file is erased. I observed that the reason for losing the file after the warm-boot is the crashing of filesys.exe giving the following debug message. Data Abort: Thread=87fc84c8 Proc=80127fd0 'filesys.exe' AKY=00000003 PC=0002c3ec(filesys.exe+0x0001c3ec) RA=0002c458(filesys. exe+0x0001c AKY=00000003 PC=0002c3ec(filesys.exe+0x0001c3ec) RA=0002c458(filesys. exe+0x0001c this thing happens only in ROM image, if we build a RAM image using the same source it works fine without a problem. And this thing only happens for the files larger than 1 MB, for smaller files even in the ROM image, warm-boot does not crash the filesys.exe does anybody have an idea what is the reason for this senario. thanks in advance. randika Tag: Import fmd driver to platform builder Tag: 112832
  - 16
    - SD Card Partionting Hi, I want to create multiple partiontions in SD memeory card. Is it possible to create partiontions in the SD card? What are the registry settings required? Thanks in advance. Tag: Import fmd driver to platform builder Tag: 112824
  - 17
    - Running NDIS Performance Test on Target with single network adaptor Hi, I want to run the CETK NDIS Performance Test for my target platform which has only one network adaptor. According to MSDN documents, we need 2 network interfaces: one for establishing PB:target board connectivity and the other one for CETK test. Is it possible to run NDIS Performance Test on the single network interface, if I establish PB:target board connectivity through some other connectivity medium such as serial. If yes, how will we perform the NDIS perfromance test on it. Rgds, Vijay R Tag: Import fmd driver to platform builder Tag: 112822
  - 18
    - about wince5.0 IRSIR problem Hi: i havbuilt an IRSIR.dll successfully. now i wanna try this IR driver. but still have some question: 1. should i update some of UART driver for IR driver use? 2.if Ircomm.dll,Irsir.dll is enough for IR to work? 3. how or what tool can i use to test this driver? (should i write an application) hope to get anyone response soon. Thanks & Best Regards. vincent tsai Tag: Import fmd driver to platform builder Tag: 112821
  - 19
    - NDIS PassThru driver Hi Do you know NDIS PassThru driver , what does it use for ? Thank you . Tag: Import fmd driver to platform builder Tag: 112819
  - 20
    - Setting up bootloader for FSample board I am trying to setup FSample board (based on OMAP850) from Texas Instruments. I read through the documentation of Windows Mobile 5.0, and I gives instruction for uploading the bootloader using OMAP Software Tools Host [OST_HOST] (also provided by TI). I have OST_HOST v1.6 but documentation asks to use OST_HOST v1.6.4, I tried with v1.6 but coudln't succeed. So I am wondering if someone could please direct me to a place where I can find it. Thanks. Tag: Import fmd driver to platform builder Tag: 112818
  - 21
    - Disallow Paging on XScale-ARM Windows CE 6.0 ? i have disabled demand paging (bei set ROMFLAGS =1 in config.bib) to force some application to RAM ... and this setting cause sometime a problem when i run my application in kernelMod! like this: Exception 'Prefetch Abort' (3): Thread-Id=03b9001e(pth=83caf4fc), Proc-Id=00400002(pprc=81138308) 'NK.EXE', VM-active=054c0002(pprc=84458c9c) 'servicesd.exe' PC=00000001(???+0x00000001) RA=00000001(???+0x00000001) SP=d0daf760, BVA=00000000 Exception 'Data Abort' (4): Thread-Id=061f0002(pth=8589d66c), Proc-Id=05490002(pprc=84a2c000) 'explorer.exe', VM-active=05490002(pprc=84a2c000) 'explorer.exe' PC=80301290(kernel.dll+0x00031290) RA=60000010(???+0x60000010) SP=d208f5e0, BVA=0c14cecc Fatal stack error (overflow), thread terminated (sp = 0c14d010) or this: Exception 'Data Abort' (4): Thread-Id=0385001e(pth=83d33864), Proc-Id=00400002(pprc=81138308) 'NK.EXE', VM-active=00400002(pprc=81138308) 'NK.EXE' PC=d1f40614(???+0xd1f40614) RA=00000001(???+0x00000001) SP=d0d8f738, BVA=00000810 if i set romflags =0 than my application work fine note: the application Run in usermod and with the setting "romflags=1" without any Exception!!!! *Problem:CE6 "Apps in kernelmod with romflags=1" ??????????? *under windows ce 5.0 all work fine! thanks sam Tag: Import fmd driver to platform builder Tag: 112816
  - 22
    - "Wireless Information" screen for wifi on Win CE 5 unreachable but Hello All, "Wireless Information" screen for wifi on Win CE 5 unreachable buttons We have a custom Win CE 5.0 box that we used Platform Builder to build the os. My issue is our screen resolution is 800 X 480 and everything seems to work correctly accept when I plug in our USB wireless device and the form that displays the available wireless networks comes up in the "Wireless Information" tab. If a network is encrypted and I need to click on advanced to enter the wep key, it appears that I have not buttons on the screen (the form does not recognize the current resolution and the buttons are "farther south" then the bottom of the screen. any help would be great. Tag: Import fmd driver to platform builder Tag: 112804
  - 23
    - How to load display driver under CE6 without K flag? Hello! I have a CE6 display driver DLL, which does not have the K flag. This driver works fine in one CE6 environment, but it does not work in another one (same HW, same processor, ...). In the non-working environment, CE6 complains that the K flag is missing, in the working one, the DLL is loaded without any comlaints... :-O It is loaded like this: [HKEY_LOCAL_MACHINE\System\GDI\Drivers] "Display"="my_ddi.dll" In the BIB file without the K flag: my_ddi.dll $(...)\my_ddi.dll NK SH How is a display driver supposed to work without the K flag? Thanks, Peter Tag: Import fmd driver to platform builder Tag: 112795
  - 24
    - Wifi Zero Config not displayed with WinCE 5.0 I am running WinCE 5.0 with a US Robotics 5421 Wifi Adapter. When I insert the 5421 USB Adapter, I am able to see the USB80321 network icon displayed in the Network and settings window. The power green LED light is ON on the device, but I don't get the Zero Config UI. Is there something I am missing in the implementation of Wifi components in the OS build or registry? Why is the Zero Config app not launching? Tag: Import fmd driver to platform builder Tag: 112790
  - 25
    - MMC 4 bit, 8 bit mode and MMC high speed support in sdbus2.dll Hi, sdbus2.dll has been supplied to support high capacity and high speed cards in wince6.0. Does it actually supporting the HC and HS features. has anybody tested those features. In my case I tested SDMemory High speed card but the card is not coming to high speed. it was running on normal speed. Does sdbuss2.dll also support 4bit and 8 bit mode for MMC? I saw the code it is doing nothing means not switching the bit mode for MMC case. Can anybody comments on this? Thanks Talib Tag: Import fmd driver to platform builder Tag: 112789

Hi,
In fact, there is a nandflash driver and there are BuildExe and FMD directories in this in my sbc's(s3c2440)cd.But it doesn't seem under bsp in platform builder.I checked .cec file of bsp.Its settings seem correct.But when i want to link this to the platform builder project file(I don't know whether or not it is necessary),i can't.Because the platform builder file's extension is pbxml, not pbpxml which cec editor requires.

So what is my problem?
Thanks in advance.

Top